PractitionerRoleLiteSe

Introduction

The PractitionerRoleLiteSe profile represents a practitioner and the connected organization and is a profile created from the resource PractitionerRole.

Intended Use

PractitionerRoleLiteSe is used for carrying the HSA ID of the staff and the unit related to the source profile referencing the PractitionerRoleLiteSe. PractitionerRoleLiteSe does not have a business identifier and is mapped to both a unit and a staff using the HSA ID:s. The profile can either be sent as a contained resources within a source profile, or included ein a bundle.

PractitionerRoleLiteSe can not be used to communicate PractitionerRoleLiteSe by itself. It must always be communicated in a context where it is referenced in as a contained resource or sent in a bundle.

Specific Rules and Limitations

Type	Description
Rule	N/A

Profile Overview

PractitionerRoleLiteSe

PractitionerRole	I		PractitionerRole	There are no (further) constraints on this element Element id PractitionerRole Short description Roles/organizations the practitioner is associated with Definition A specific set of Roles/Locations/specialties/services that a practitioner may perform at an organization for a period of time. Data type PractitionerRole Constraints dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources `contained.contained.empty()` dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated `contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()` dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource `contained.where((('#'+id in (%resource.descendants().reference \| %resource.descendants().as(canonical) \| %resource.descendants().as(uri) \| %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty()` dom-6: A resource should have narrative for robust management text.`div`.exists() dom-5: If a resource is contained in another resource, it SHALL NOT have a security label `contained.meta.security.empty()` Mappings rim: Entity. Role, or Act v2: PRD (as one example) rim: Role servd: ServiceSiteProvider
id	Σ	0..1	string	There are no (further) constraints on this element Element id PractitionerRole.id Short description Logical id of this artifact Definition The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes. Comments The only time that a resource does not have an id is when it is being submitted to the server using a create operation. Data type string
meta	Σ	0..1	Meta	There are no (further) constraints on this element Element id PractitionerRole.meta Short description Metadata about the resource Definition The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource. Data type Meta Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: N/A
implicitRules	Σ ?!	0..1	uri	There are no (further) constraints on this element Element id PractitionerRole.implicitRules Short description A set of rules under which this content was created Definition A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc. Comments Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
language		0..1	codeBinding	There are no (further) constraints on this element Element id PractitionerRole.language Short description Language of the resource content Definition The base language in which the resource is written. Comments Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute). Data type code Binding A human language. CommonLanguages (preferred) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
text		0..1	Narrative	There are no (further) constraints on this element Element id PractitionerRole.text Short description Text summary of the resource, for human interpretation Alternate names narrative, html, xhtml, display Definition A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety. Comments Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later. Data type Narrative Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: N/A rim: Act.text?
contained		0..*	Resource	There are no (further) constraints on this element Element id PractitionerRole.contained Short description Contained, inline Resources Alternate names inline resources, anonymous resources, contained resources Definition These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope. Comments This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels. Data type Resource Mappings rim: Entity. Role, or Act rim: N/A
extension	I	0..*	Extension	There are no (further) constraints on this element Element id PractitionerRole.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	?! I	0..*	Extension	There are no (further) constraints on this element Element id PractitionerRole.modifierExtension Short description Extensions that cannot be ignored Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
identifier	Σ	0..0	Identifier	There are no (further) constraints on this element Element id PractitionerRole.identifier Short description Business Identifiers that are specific to a role/location Definition Business Identifiers that are specific to a role/location. Requirements Often, specific identities are assigned for the agent. Data type Identifier Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: CX / EI (occasionally, more often EI maps to a resource id or a URL) rim: II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd: Identifier w5: FiveWs.identifier v2: PRD-7 (or XCN.1) rim: .id servd: ./Identifiers
active	Σ	0..0	boolean	There are no (further) constraints on this element Element id PractitionerRole.active Short description Whether this practitioner role record is in active use Definition Whether this practitioner role record is in active use. Requirements Need to be able to mark a practitioner role record as not to be used because it was created in error, or otherwise no longer in active use. Comments If this value is false, you may refer to the period to see when the role was in active use. If there is no period specified, no inference can be made about when it was active. Meaning when missing This resource is generally assumed to be active if no value is provided for the active element Data type boolean Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a w5: FiveWs.status v2: STF-7 rim: .statusCode
period	Σ I	0..0	Period	There are no (further) constraints on this element Element id PractitionerRole.period Short description The period during which the practitioner is authorized to perform in these role(s) Definition The period during which the person is authorized to act as a practitioner in these role(s) for the organization. Requirements Even after the agencies is revoked, the fact that it existed must still be recorded. Comments A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration. Data type Period Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` per-1: If present, start SHALL have a lower value than end `start.hasValue().not() or end.hasValue().not() or (start <= end)` Mappings rim: n/a v2: DR rim: IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"] w5: FiveWs.done[x] v2: PRD-8/9 / PRA-5.4 rim: .performance[@typeCode <= 'PPRF'].ActDefinitionOrEvent.effectiveTime servd: (ServD maps Practitioners and Organizations via another entity, so this concept is not available)
practitioner	Σ I	1..1	Reference(Practitioner)	There are no (further) constraints on this element Element id PractitionerRole.practitioner Short description Practitioner that is able to provide the defined services for the organization Definition Practitioner that is able to provide the defined services for the organization. Comments References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository. Data type Reference(Practitioner) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity) rim: .player
id		0..1	string	There are no (further) constraints on this element Element id PractitionerRole.practitioner.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id PractitionerRole.practitioner.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
reference	Σ I	0..1	string	There are no (further) constraints on this element Element id PractitionerRole.practitioner.reference Short description Literal reference, Relative, internal or absolute URL Definition A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources. Comments Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: N/A
type	Σ	0..1	uriBinding	There are no (further) constraints on this element Element id PractitionerRole.practitioner.type Short description Type the reference refers to (e.g. "Patient") Definition The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent. The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources). Comments This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified. Data type uri Binding Aa resource (or, for logical models, the URI of the logical model). ResourceType (extensible) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: N/A
identifier	Σ	0..1	Identifier	There are no (further) constraints on this element Element id PractitionerRole.practitioner.identifier Short description Logical reference, when literal reference is not known Definition An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference. Comments When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it. Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation\|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any). Data type Identifier Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: CX / EI (occasionally, more often EI maps to a resource id or a URL) rim: II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd: Identifier rim: .identifier
id		0..1	string	There are no (further) constraints on this element Element id PractitionerRole.practitioner.identifier.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id PractitionerRole.practitioner.identifier.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
use	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element id PractitionerRole.practitioner.identifier.use Short description usual \| official \| temp \| secondary \| old (If known) Definition The purpose of this identifier. Requirements Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. Comments Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. Data type code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: N/A rim: Role.code or implied by context
type	Σ	0..1	CodeableConceptBinding	There are no (further) constraints on this element Element id PractitionerRole.practitioner.identifier.type Short description Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. Requirements Allows users to make use of identifiers when the identifier system is not known. Comments This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. Data type CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD v2: CX.5 rim: Role.code or implied by context
system	Σ	1..1	uriFixed Value	Element id PractitionerRole.practitioner.identifier.system Short description The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique. Requirements There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. Comments Identifier.system is always case sensitive. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Fixed value urn:oid:1.2.752.129.2.1.4.1 Mappings rim: n/a v2: CX.4 / EI-2-4 rim: II.root or Role.id.root servd: ./IdentifierType
value	Σ	1..1	string	Element id PractitionerRole.practitioner.identifier.value Short description The value that is unique Definition HSA-id if the practitioner Comments If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General 123456 Mappings rim: n/a v2: CX.1 / EI.1 rim: II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd: ./Value
period	Σ I	0..1	Period	There are no (further) constraints on this element Element id PractitionerRole.practitioner.identifier.period Short description Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use. Comments A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration. Data type Period Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` per-1: If present, start SHALL have a lower value than end `start.hasValue().not() or end.hasValue().not() or (start <= end)` Mappings rim: n/a v2: DR rim: IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"] v2: CX.7 + CX.8 rim: Role.effectiveTime or implied by context servd: ./StartDate and ./EndDate
assigner	Σ I	0..1	Reference(Organization)	There are no (further) constraints on this element Element id PractitionerRole.practitioner.identifier.assigner Short description Organization that issued id (may be just text) Definition Organization that issued/manages the identifier. Comments The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. Data type Reference(Organization) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2: CX.4 / (CX.4,CX.9,CX.10) rim: II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd: ./IdentifierIssuingAuthority
display	Σ	0..1	string	There are no (further) constraints on this element Element id PractitionerRole.practitioner.display Short description Text alternative for the resource Definition Plain text narrative that identifies the resource in addition to the resource reference. Comments This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: N/A
organization	Σ I	1..1	Reference(OrganizationSEVendorLite)	Element id PractitionerRole.organization Short description Organization where the roles are available Definition The organization where the Practitioner performs the roles associated. Comments References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository. Data type Reference(OrganizationSEVendorLite) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity) rim: .scoper
id		0..1	string	There are no (further) constraints on this element Element id PractitionerRole.organization.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id PractitionerRole.organization.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
reference	Σ I	0..1	string	There are no (further) constraints on this element Element id PractitionerRole.organization.reference Short description Literal reference, Relative, internal or absolute URL Definition A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources. Comments Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: N/A
type	Σ	0..1	uriBinding	There are no (further) constraints on this element Element id PractitionerRole.organization.type Short description Type the reference refers to (e.g. "Patient") Definition The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent. The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources). Comments This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified. Data type uri Binding Aa resource (or, for logical models, the URI of the logical model). ResourceType (extensible) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: N/A
identifier	Σ	0..1	Identifier	There are no (further) constraints on this element Element id PractitionerRole.organization.identifier Short description Logical reference, when literal reference is not known Definition An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference. Comments When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it. Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation\|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any). Data type Identifier Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: CX / EI (occasionally, more often EI maps to a resource id or a URL) rim: II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd: Identifier rim: .identifier
id		0..1	string	There are no (further) constraints on this element Element id PractitionerRole.organization.identifier.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id PractitionerRole.organization.identifier.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
use	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element id PractitionerRole.organization.identifier.use Short description usual \| official \| temp \| secondary \| old (If known) Definition The purpose of this identifier. Requirements Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. Comments Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. Data type code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: N/A rim: Role.code or implied by context
type	Σ	0..1	CodeableConceptBinding	There are no (further) constraints on this element Element id PractitionerRole.organization.identifier.type Short description Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. Requirements Allows users to make use of identifiers when the identifier system is not known. Comments This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. Data type CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD v2: CX.5 rim: Role.code or implied by context
system	Σ	1..1	uriFixed Value	Element id PractitionerRole.organization.identifier.system Short description The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique. Requirements There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. Comments Identifier.system is always case sensitive. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Fixed value urn:oid:1.2.752.129.2.1.4.1 Mappings rim: n/a v2: CX.4 / EI-2-4 rim: II.root or Role.id.root servd: ./IdentifierType
value	Σ	1..1	string	Element id PractitionerRole.organization.identifier.value Short description The value that is unique Definition HSA-id for the organization Comments If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General 123456 Mappings rim: n/a v2: CX.1 / EI.1 rim: II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd: ./Value
period	Σ I	0..1	Period	There are no (further) constraints on this element Element id PractitionerRole.organization.identifier.period Short description Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use. Comments A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration. Data type Period Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` per-1: If present, start SHALL have a lower value than end `start.hasValue().not() or end.hasValue().not() or (start <= end)` Mappings rim: n/a v2: DR rim: IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"] v2: CX.7 + CX.8 rim: Role.effectiveTime or implied by context servd: ./StartDate and ./EndDate
assigner	Σ I	0..1	Reference(Organization)	There are no (further) constraints on this element Element id PractitionerRole.organization.identifier.assigner Short description Organization that issued id (may be just text) Definition Organization that issued/manages the identifier. Comments The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. Data type Reference(Organization) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2: CX.4 / (CX.4,CX.9,CX.10) rim: II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd: ./IdentifierIssuingAuthority
display	Σ	0..1	string	There are no (further) constraints on this element Element id PractitionerRole.organization.display Short description Text alternative for the resource Definition Plain text narrative that identifies the resource in addition to the resource reference. Comments This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: N/A
code	Σ	0..*	CodeableConcept	Element id PractitionerRole.code Short description Roles which this practitioner may perform Definition Currently not supported in COSMIC Requirements Need to know what authority the practitioner has - what can they do? Comments A person may have more than one role. Data type CodeableConcept Binding The role a person plays representing an organization. PractitionerRole (example) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD v2: PRD-1 / STF-18 / PRA-3 / PRT-4 / ROL-3 / ORC-12 / OBR-16 / PV1-7 / PV1-8 / PV1-9 / PV1-17 rim: .code servd: (ServD maps Practitioners and Organizations via another entity, so this concept is not available)
specialty	Σ	0..0	CodeableConceptBinding	There are no (further) constraints on this element Element id PractitionerRole.specialty Short description Specific specialty of the practitioner Definition Specific specialty of the practitioner. Comments Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination. Data type CodeableConcept Binding Specific specialty associated with the agency. PracticeSettingCodeValueSet (preferred) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD v2: PRA-5 rim: .player.HealthCareProvider[@classCode = 'PROV'].code servd: ./Specialty
location	Σ I	0..0	Reference(Location)	There are no (further) constraints on this element Element id PractitionerRole.location Short description The location(s) at which this practitioner provides care Definition The location(s) at which this practitioner provides care. Comments References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository. Data type Reference(Location) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity) w5: FiveWs.where[x] rim: .performance.ActDefinitionOrEvent.ServiceDeliveryLocation[@classCode = 'SDLOC'] servd: (ServD maps Practitioners and Organizations via another entity, so this concept is not available)<br/> However these are accessed via the Site.ServiceSite.ServiceSiteProvider record. (The Site has the location)
healthcareService	I	0..0	Reference(HealthcareService)	There are no (further) constraints on this element Element id PractitionerRole.healthcareService Short description The list of healthcare services that this worker provides for this role's Organization/Location(s) Definition The list of healthcare services that this worker provides for this role's Organization/Location(s). Comments References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository. Data type Reference(HealthcareService) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2: EDU-2 / AFF-3 rim: .player.QualifiedEntity[@classCode = 'QUAL'].code
telecom	Σ I	0..0	ContactPoint	There are no (further) constraints on this element Element id PractitionerRole.telecom Short description Contact details that are specific to the role/location/service Definition Contact details that are specific to the role/location/service. Requirements Often practitioners have a dedicated line for each location (or service) that they work at, and need to be able to define separate contact details for each of these. Data type ContactPoint Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` cpt-2: A system is required if a value is provided. `value.empty() or system.exists()` Mappings rim: n/a v2: XTN rim: TEL servd: ContactPoint rim: .telecom
availableTime		0..0	BackboneElement	There are no (further) constraints on this element Element id PractitionerRole.availableTime Short description Times the Service Site is available Definition A collection of times the practitioner is available or performing this role at the location and/or healthcareservice. Comments More detailed availability information may be provided in associated Schedule/Slot resources. Data type BackboneElement Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: .effectiveTime
notAvailable		0..0	BackboneElement	There are no (further) constraints on this element Element id PractitionerRole.notAvailable Short description Not available during this time due to provided reason Definition The practitioner is not available or performing this role during this period of time due to the provided reason. Data type BackboneElement Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: .effectiveTime
availabilityExceptions		0..0	string	There are no (further) constraints on this element Element id PractitionerRole.availabilityExceptions Short description Description of availability exceptions Definition A description of site availability exceptions, e.g. public holiday availability. Succinctly describing all possible exceptions to normal site availability as details in the available Times and not available Times. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: .effectiveTime
endpoint	I	0..0	Reference(Endpoint)	There are no (further) constraints on this element Element id PractitionerRole.endpoint Short description Technical endpoints providing access to services operated for the practitioner with this role Definition Technical endpoints providing access to services operated for the practitioner with this role. Requirements Organizations have multiple systems that provide various services and ,ay also be different for practitioners too. So the endpoint satisfies the need to be able to define the technical connection details for how to connect to them, and for what purpose. Comments References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository. Data type Reference(Endpoint) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity)

Versions

COS version	Profile version	Required COSMIC version	Date	Description
4.1.0	1.0.0	R8.3.05	Jan 2021	Initial version

Supported Operations

Currently PractitionerRoleLiteSe is only supported as a contained resource. Therefore there are no supported operations for this profile.