MII IG Onkologie DE v2024

Extensions von Strahlentherapie: Bestrahlung

Die Bestrahlungsextension ist die umfangreichste Extension. Hier können alle Informationen kodiert werden, die für einzelne Bestrahlungseinheiten relevant sind und die nicht bereits durch das übergeordnete Prozedurprofil Strahlentherapie abgedeckt wurden.

Inhalt

MII_EX_Onko_Strahlentherapie_Bestrahlung (Extension)	I		Extension	Element id Extension Short description MII EX Onko Strahlentherapie Bestrahlung Definition Strahlentherapie: einzelne Bestrahlung innerhalb der Gesamttherapie Data type Extension Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
id		0..1	string	There are no (further) constraints on this element Element id Extension.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	3..*	Extension	There are no (further) constraints on this element Element id Extension.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
Applikationsart	S I	1..1	Extension	Element id Extension.extension:Applikationsart Short description Strahlentherapie Applikationsart Alternate names extensions, user content Definition Gibt an, mit welcher Technik die Strahlentherapie durchgeführt wurde. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
id		0..1	string	There are no (further) constraints on this element Element id Extension.extension:Applikationsart.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..0	Extension	There are no (further) constraints on this element Element id Extension.extension:Applikationsart.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
url		1..1	uriFixed Value	Element id Extension.extension:Applikationsart.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data type uri Fixed value Applikationsart Mappings rim: N/A
value[x]		0..1	Binding	Element id Extension.extension:Applikationsart.value[x] Short description Value of extension Definition Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). Binding MII_VS_Onko_Strahlentherapie_Applikationsart (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: N/A
valueCodeableConcept			CodeableConcept	Data type CodeableConcept
Strahlenart	S I	1..1	Extension	Element id Extension.extension:Strahlenart Short description Strahlentherapie Strahlenart Alternate names extensions, user content Definition Gibt an, mit welcher Strahlenart (sowohl Strahlung als auch Metabolite) die Strahlentherapie durchgeführt wurde. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
id		0..1	string	There are no (further) constraints on this element Element id Extension.extension:Strahlenart.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..0	Extension	There are no (further) constraints on this element Element id Extension.extension:Strahlenart.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
url		1..1	uriFixed Value	Element id Extension.extension:Strahlenart.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data type uri Fixed value Strahlenart Mappings rim: N/A
value[x]		0..1	Binding	Element id Extension.extension:Strahlenart.value[x] Short description Value of extension Definition Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). Binding MII_VS_Onko_Strahlentherapie_Strahlenart (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: N/A
valueCodeableConcept			CodeableConcept	Data type CodeableConcept
Zielgebiet	S I	1..1	Extension	Element id Extension.extension:Zielgebiet Short description Strahlentherapie Zielgebiet Alternate names extensions, user content Definition Gibt an, an welcher anatomischen Region die Bestrahlung durchgeführt wurde. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
id		0..1	string	There are no (further) constraints on this element Element id Extension.extension:Zielgebiet.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..0	Extension	There are no (further) constraints on this element Element id Extension.extension:Zielgebiet.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
url		1..1	uriFixed Value	Element id Extension.extension:Zielgebiet.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data type uri Fixed value Zielgebiet Mappings rim: N/A
value[x]		0..1	Binding	Element id Extension.extension:Zielgebiet.value[x] Short description Value of extension Definition Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). Binding MII_VS_Onko_Strahlentherapie_Zielgebiet (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: N/A
valueCodeableConcept			CodeableConcept	Data type CodeableConcept
Zielgebiet_Lateralitaet	S I	0..1	Extension	Element id Extension.extension:Zielgebiet_Lateralitaet Short description Seitenlokalisation Zielgebietes Alternate names extensions, user content Definition Gibt Seitenlokalisation des Zielgebietes an. Bei beidseitiger Bestrahlung paariger Organe sind die Bestrahlungen einzeln zu melden. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
id		0..1	string	There are no (further) constraints on this element Element id Extension.extension:Zielgebiet_Lateralitaet.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..0	Extension	There are no (further) constraints on this element Element id Extension.extension:Zielgebiet_Lateralitaet.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
url		1..1	uriFixed Value	Element id Extension.extension:Zielgebiet_Lateralitaet.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data type uri Fixed value Zielgebiet_Lateralitaet Mappings rim: N/A
value[x]		0..1	Binding	Element id Extension.extension:Zielgebiet_Lateralitaet.value[x] Short description Value of extension Definition Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). Binding MII_VS_Onko_Seitenlokalisation (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: N/A
valueCodeableConcept			CodeableConcept	Data type CodeableConcept
Gesamtdosis	S I	0..1	Extension	Element id Extension.extension:Gesamtdosis Short description Strahlentherapie Gesamtdosis (Dosis) Alternate names extensions, user content Definition Gibt an, mit welcher Gesamtdosis da Zielgebiet bestrahlt wurde (inklusive Boost). Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
id		0..1	string	There are no (further) constraints on this element Element id Extension.extension:Gesamtdosis.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..0	Extension	There are no (further) constraints on this element Element id Extension.extension:Gesamtdosis.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
url		1..1	uriFixed Value	Element id Extension.extension:Gesamtdosis.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data type uri Fixed value Gesamtdosis Mappings rim: N/A
value[x]		0..1	Binding	Element id Extension.extension:Gesamtdosis.value[x] Short description Value of extension Definition Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). Binding MII_VS_Onko_Strahlentherapie_Strahlungseinheit (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: N/A
valueQuantity			Quantity	Data type Quantity
id		0..1	string	There are no (further) constraints on this element Element id Extension.extension:Gesamtdosis.value[x].id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Extension.extension:Gesamtdosis.value[x].extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
value	Σ	0..1	decimal	There are no (further) constraints on this element Element id Extension.extension:Gesamtdosis.value[x].value Short description Numerical value (with implicit precision) Definition The value of the measured amount. The value includes an implicit precision in the presentation of the value. Requirements Precision is handled implicitly in almost all cases of measurement. Comments The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books). Data type decimal Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: SN.2 / CQ - N/A rim: PQ.value, CO.value, MO.value, IVL.high or IVL.low depending on the value
comparator	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element id Extension.extension:Gesamtdosis.value[x].comparator Short description < \| <= \| >= \| > - how to understand the value Definition How the value should be understood and represented - whether the actual value is greater or less than the stated value due to measurement issues; e.g. if the comparator is "<" , then the real value is < stated value. Requirements Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Meaning when missing If there is no comparator, then there is no modification of the value Data type code Binding How the Quantity should be understood and represented. QuantityComparator (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: SN.1 / CQ.1 rim: IVL properties
unit	Σ	0..1	string	There are no (further) constraints on this element Element id Extension.extension:Gesamtdosis.value[x].unit Short description Unit representation Definition A human-readable form of the unit. Requirements There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: (see OBX.6 etc.) / CQ.2 rim: PQ.unit
system	Σ I	0..1	uriPattern	Element id Extension.extension:Gesamtdosis.value[x].system Short description System that defines coded unit form Definition The identification of the system that provides the coded form of the unit. Requirements Need to know the system that defines the coded form of the unit. Comments see http://en.wikipedia.org/wiki/Uniform_resource_identifier Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Pattern http://unitsofmeasure.org Mappings rim: n/a v2: (see OBX.6 etc.) / CQ.2 rim: CO.codeSystem, PQ.translation.codeSystem
code	Σ	0..1	code	There are no (further) constraints on this element Element id Extension.extension:Gesamtdosis.value[x].code Short description Coded form of the unit Definition A computer processable form of the unit in some unit representation system. Requirements Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest. Comments The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system. Data type code Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: (see OBX.6 etc.) / CQ.2 rim: PQ.code, MO.currency, PQ.translation.code
Einzeldosis	S I	0..1	Extension	Element id Extension.extension:Einzeldosis Short description Strahlentherapie Einzeldosis pro Tag (Dosis) Alternate names extensions, user content Definition Gibt an, mit welcher Einzeldosis (häufigste Dosis, nicht Boost) pro Tag das Zielgebiet bestrahlt wurde. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
id		0..1	string	There are no (further) constraints on this element Element id Extension.extension:Einzeldosis.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..0	Extension	There are no (further) constraints on this element Element id Extension.extension:Einzeldosis.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
url		1..1	uriFixed Value	Element id Extension.extension:Einzeldosis.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data type uri Fixed value Einzeldosis Mappings rim: N/A
value[x]		0..1	Binding	Element id Extension.extension:Einzeldosis.value[x] Short description Value of extension Definition Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). Binding MII_VS_Onko_Strahlentherapie_Strahlungseinheit (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: N/A
valueQuantity			Quantity	Data type Quantity
id		0..1	string	There are no (further) constraints on this element Element id Extension.extension:Einzeldosis.value[x].id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Extension.extension:Einzeldosis.value[x].extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
value	Σ	0..1	decimal	There are no (further) constraints on this element Element id Extension.extension:Einzeldosis.value[x].value Short description Numerical value (with implicit precision) Definition The value of the measured amount. The value includes an implicit precision in the presentation of the value. Requirements Precision is handled implicitly in almost all cases of measurement. Comments The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books). Data type decimal Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: SN.2 / CQ - N/A rim: PQ.value, CO.value, MO.value, IVL.high or IVL.low depending on the value
comparator	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element id Extension.extension:Einzeldosis.value[x].comparator Short description < \| <= \| >= \| > - how to understand the value Definition How the value should be understood and represented - whether the actual value is greater or less than the stated value due to measurement issues; e.g. if the comparator is "<" , then the real value is < stated value. Requirements Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Meaning when missing If there is no comparator, then there is no modification of the value Data type code Binding How the Quantity should be understood and represented. QuantityComparator (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: SN.1 / CQ.1 rim: IVL properties
unit	Σ	0..1	string	There are no (further) constraints on this element Element id Extension.extension:Einzeldosis.value[x].unit Short description Unit representation Definition A human-readable form of the unit. Requirements There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: (see OBX.6 etc.) / CQ.2 rim: PQ.unit
system	Σ I	0..1	uriPattern	Element id Extension.extension:Einzeldosis.value[x].system Short description System that defines coded unit form Definition The identification of the system that provides the coded form of the unit. Requirements Need to know the system that defines the coded form of the unit. Comments see http://en.wikipedia.org/wiki/Uniform_resource_identifier Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Pattern http://unitsofmeasure.org Mappings rim: n/a v2: (see OBX.6 etc.) / CQ.2 rim: CO.codeSystem, PQ.translation.codeSystem
code	Σ	0..1	code	There are no (further) constraints on this element Element id Extension.extension:Einzeldosis.value[x].code Short description Coded form of the unit Definition A computer processable form of the unit in some unit representation system. Requirements Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest. Comments The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system. Data type code Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: (see OBX.6 etc.) / CQ.2 rim: PQ.code, MO.currency, PQ.translation.code
Boost	S I	0..1	Extension	Element id Extension.extension:Boost Short description Strahlentherapie Boost Alternate names extensions, user content Definition Angabe, ob ein Boost und falls ja, welche Art von Boost appliziert wurde. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
id		0..1	string	There are no (further) constraints on this element Element id Extension.extension:Boost.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..0	Extension	There are no (further) constraints on this element Element id Extension.extension:Boost.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
url		1..1	uriFixed Value	Element id Extension.extension:Boost.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data type uri Fixed value Boost Mappings rim: N/A
value[x]		0..1	Binding	Element id Extension.extension:Boost.value[x] Short description Value of extension Definition Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). Binding MII_VS_Onko_Strahlentherapie_Boosts (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: N/A
valueCodeableConcept			CodeableConcept	Data type CodeableConcept
url		1..1	uriFixed Value	Element id Extension.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data type uri Fixed value https://www.medizininformatik-initiative.de/fhir/ext/modul-onko/StructureDefinition/mii-ex-onko-strahlentherapie-bestrahlung Mappings rim: N/A
value[x]		0..0		There are no (further) constraints on this element Element id Extension.value[x] Short description Value of extension Definition Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: N/A

Strahlentherapie: einzelne Bestrahlung innerhalb der Gesamttherapie

Feldname	Kurzbeschreibung
Extension.extension:Applikationsart	Strahlentherapie Applikationsart
Extension.extension:Strahlenart	Strahlentherapie Strahlenart
Extension.extension:Zielgebiet	Strahlentherapie Zielgebiet
Extension.extension:Zielgebiet_Lateralitaet	Seitenlokalisation Zielgebietes
Extension.extension:Gesamtdosis	Strahlentherapie Gesamtdosis (Dosis)
Extension.extension:Einzeldosis	Strahlentherapie Einzeldosis pro Tag (Dosis)
Extension.extension:Boost	Strahlentherapie Boost

<StructureDefinition xmlns="http://hl7.org/fhir">
    <id value="mii-ex-onko-strahlentherapie-bestrahlung" />
    <url value="https://www.medizininformatik-initiative.de/fhir/ext/modul-onko/StructureDefinition/mii-ex-onko-strahlentherapie-bestrahlung" />
    <version value="2024.0.0-ballot" />
    <name value="MII_EX_Onko_Strahlentherapie_Bestrahlung" />
    <title value="MII EX Onko Strahlentherapie Bestrahlung" />
    <status value="draft" />
    <publisher value="Medizininformatik Initiative" />
    <contact>
        <telecom>
            <system value="url" />
            <value value="https://www.medizininformatik-initiative.de" />
        </telecom>
    </contact>
    <description value="Strahlentherapie: einzelne Bestrahlung innerhalb der Gesamttherapie" />
    <fhirVersion value="4.0.1" />
    <kind value="complex-type" />
    <abstract value="false" />
    <context>
        <type value="element" />
        <expression value="Procedure" />
    </context>
    <type value="Extension" />
    <baseDefinition value="http://hl7.org/fhir/StructureDefinition/Extension" />
    <derivation value="constraint" />
    <differential>
        <element id="Extension">
            <path value="Extension" />
            <short value="MII EX Onko Strahlentherapie Bestrahlung" />
            <definition value="Strahlentherapie: einzelne Bestrahlung innerhalb der Gesamttherapie" />
        </element>
        <element id="Extension.extension">
            <path value="Extension.extension" />
            <min value="3" />
        </element>
        <element id="Extension.extension:Applikationsart">
            <path value="Extension.extension" />
            <sliceName value="Applikationsart" />
            <short value="Strahlentherapie Applikationsart" />
            <definition value="Gibt an, mit welcher Technik die Strahlentherapie durchgef&#252;hrt wurde." />
            <min value="1" />
            <max value="1" />
            <mustSupport value="true" />
        </element>
        <element id="Extension.extension:Applikationsart.extension">
            <path value="Extension.extension.extension" />
            <max value="0" />
        </element>
        <element id="Extension.extension:Applikationsart.url">
            <path value="Extension.extension.url" />
            <fixedUri value="Applikationsart" />
        </element>
        <element id="Extension.extension:Applikationsart.value[x]">
            <path value="Extension.extension.value[x]" />
            <type>
                <code value="CodeableConcept" />
            </type>
            <binding>
                <strength value="required" />
                <valueSet value="https://www.medizininformatik-initiative.de/fhir/ext/modul-onko/ValueSet/mii-vs-onko-sstrahlentherapie-applikationsart" />
            </binding>
        </element>
        <element id="Extension.extension:Strahlenart">
            <path value="Extension.extension" />
            <sliceName value="Strahlenart" />
            <short value="Strahlentherapie Strahlenart" />
            <definition value="Gibt an, mit welcher Strahlenart (sowohl Strahlung als auch Metabolite) die Strahlentherapie durchgef&#252;hrt wurde." />
            <min value="1" />
            <max value="1" />
            <mustSupport value="true" />
        </element>
        <element id="Extension.extension:Strahlenart.extension">
            <path value="Extension.extension.extension" />
            <max value="0" />
        </element>
        <element id="Extension.extension:Strahlenart.url">
            <path value="Extension.extension.url" />
            <fixedUri value="Strahlenart" />
        </element>
        <element id="Extension.extension:Strahlenart.value[x]">
            <path value="Extension.extension.value[x]" />
            <type>
                <code value="CodeableConcept" />
            </type>
            <binding>
                <strength value="required" />
                <valueSet value="https://www.medizininformatik-initiative.de/fhir/ext/modul-onko/ValueSet/mii-vs-strahlentherapie-strahlenart" />
            </binding>
        </element>
        <element id="Extension.extension:Zielgebiet">
            <path value="Extension.extension" />
            <sliceName value="Zielgebiet" />
            <short value="Strahlentherapie Zielgebiet" />
            <definition value="Gibt an, an welcher anatomischen Region die Bestrahlung durchgef&#252;hrt wurde." />
            <min value="1" />
            <max value="1" />
            <mustSupport value="true" />
        </element>
        <element id="Extension.extension:Zielgebiet.extension">
            <path value="Extension.extension.extension" />
            <max value="0" />
        </element>
        <element id="Extension.extension:Zielgebiet.url">
            <path value="Extension.extension.url" />
            <fixedUri value="Zielgebiet" />
        </element>
        <element id="Extension.extension:Zielgebiet.value[x]">
            <path value="Extension.extension.value[x]" />
            <type>
                <code value="CodeableConcept" />
            </type>
            <binding>
                <strength value="required" />
                <valueSet value="https://www.medizininformatik-initiative.de/fhir/ext/modul-onko/ValueSet/mii-vs-strahlentherapie-zielgebiet" />
            </binding>
        </element>
        <element id="Extension.extension:Zielgebiet_Lateralitaet">
            <path value="Extension.extension" />
            <sliceName value="Zielgebiet_Lateralitaet" />
            <short value="Seitenlokalisation Zielgebietes" />
            <definition value="Gibt Seitenlokalisation des Zielgebietes an. Bei beidseitiger Bestrahlung paariger Organe sind die Bestrahlungen einzeln zu melden." />
            <min value="0" />
            <max value="1" />
            <mustSupport value="true" />
        </element>
        <element id="Extension.extension:Zielgebiet_Lateralitaet.extension">
            <path value="Extension.extension.extension" />
            <max value="0" />
        </element>
        <element id="Extension.extension:Zielgebiet_Lateralitaet.url">
            <path value="Extension.extension.url" />
            <fixedUri value="Zielgebiet_Lateralitaet" />
        </element>
        <element id="Extension.extension:Zielgebiet_Lateralitaet.value[x]">
            <path value="Extension.extension.value[x]" />
            <type>
                <code value="CodeableConcept" />
            </type>
            <binding>
                <strength value="required" />
                <valueSet value="https://www.medizininformatik-initiative.de/fhir/ext/modul-onko/ValueSet/mii-vs-onko-seitenlokalisation" />
            </binding>
        </element>
        <element id="Extension.extension:Gesamtdosis">
            <path value="Extension.extension" />
            <sliceName value="Gesamtdosis" />
            <short value="Strahlentherapie Gesamtdosis (Dosis)" />
            <definition value="Gibt an, mit welcher Gesamtdosis da Zielgebiet bestrahlt wurde (inklusive Boost)." />
            <min value="0" />
            <max value="1" />
            <mustSupport value="true" />
        </element>
        <element id="Extension.extension:Gesamtdosis.extension">
            <path value="Extension.extension.extension" />
            <max value="0" />
        </element>
        <element id="Extension.extension:Gesamtdosis.url">
            <path value="Extension.extension.url" />
            <fixedUri value="Gesamtdosis" />
        </element>
        <element id="Extension.extension:Gesamtdosis.value[x]">
            <path value="Extension.extension.value[x]" />
            <type>
                <code value="Quantity" />
            </type>
            <binding>
                <strength value="required" />
                <valueSet value="https://www.medizininformatik-initiative.de/fhir/ext/modul-onko/ValueSet/mii-vs-strahlentherapie-strahlungseinheit" />
            </binding>
        </element>
        <element id="Extension.extension:Gesamtdosis.value[x].system">
            <path value="Extension.extension.value[x].system" />
            <patternUri value="http://unitsofmeasure.org" />
        </element>
        <element id="Extension.extension:Einzeldosis">
            <path value="Extension.extension" />
            <sliceName value="Einzeldosis" />
            <short value="Strahlentherapie Einzeldosis pro Tag (Dosis)" />
            <definition value="Gibt an, mit welcher Einzeldosis (h&#228;ufigste Dosis, nicht Boost) pro Tag das Zielgebiet bestrahlt wurde." />
            <min value="0" />
            <max value="1" />
            <mustSupport value="true" />
        </element>
        <element id="Extension.extension:Einzeldosis.extension">
            <path value="Extension.extension.extension" />
            <max value="0" />
        </element>
        <element id="Extension.extension:Einzeldosis.url">
            <path value="Extension.extension.url" />
            <fixedUri value="Einzeldosis" />
        </element>
        <element id="Extension.extension:Einzeldosis.value[x]">
            <path value="Extension.extension.value[x]" />
            <type>
                <code value="Quantity" />
            </type>
            <binding>
                <strength value="required" />
                <valueSet value="https://www.medizininformatik-initiative.de/fhir/ext/modul-onko/ValueSet/mii-vs-strahlentherapie-strahlungseinheit" />
            </binding>
        </element>
        <element id="Extension.extension:Einzeldosis.value[x].system">
            <path value="Extension.extension.value[x].system" />
            <patternUri value="http://unitsofmeasure.org" />
        </element>
        <element id="Extension.extension:Boost">
            <path value="Extension.extension" />
            <sliceName value="Boost" />
            <short value="Strahlentherapie Boost" />
            <definition value="Angabe, ob ein Boost und falls ja, welche Art von Boost appliziert wurde." />
            <min value="0" />
            <max value="1" />
            <mustSupport value="true" />
        </element>
        <element id="Extension.extension:Boost.extension">
            <path value="Extension.extension.extension" />
            <max value="0" />
        </element>
        <element id="Extension.extension:Boost.url">
            <path value="Extension.extension.url" />
            <fixedUri value="Boost" />
        </element>
        <element id="Extension.extension:Boost.value[x]">
            <path value="Extension.extension.value[x]" />
            <type>
                <code value="CodeableConcept" />
            </type>
            <binding>
                <strength value="required" />
                <valueSet value="https://www.medizininformatik-initiative.de/fhir/ext/modul-onko/ValueSet/mii-vs-onko-strahlentherapie-boost" />
            </binding>
        </element>
        <element id="Extension.url">
            <path value="Extension.url" />
            <fixedUri value="https://www.medizininformatik-initiative.de/fhir/ext/modul-onko/StructureDefinition/mii-ex-onko-strahlentherapie-bestrahlung" />
        </element>
        <element id="Extension.value[x]">
            <path value="Extension.value[x]" />
            <max value="0" />
        </element>
    </differential>
</StructureDefinition>

{
    "resourceType": "StructureDefinition",
    "id": "mii-ex-onko-strahlentherapie-bestrahlung",
    "url": "https://www.medizininformatik-initiative.de/fhir/ext/modul-onko/StructureDefinition/mii-ex-onko-strahlentherapie-bestrahlung",
    "version": "2024.0.0-ballot",
    "name": "MII_EX_Onko_Strahlentherapie_Bestrahlung",
    "title": "MII EX Onko Strahlentherapie Bestrahlung",
    "status": "draft",
    "publisher": "Medizininformatik Initiative",
    "contact":  [
        {
            "telecom":  [
                {
                    "system": "url",
                    "value": "https://www.medizininformatik-initiative.de"
                }
            ]
        }
    ],
    "description": "Strahlentherapie: einzelne Bestrahlung innerhalb der Gesamttherapie",
    "fhirVersion": "4.0.1",
    "kind": "complex-type",
    "abstract": false,
    "context":  [
        {
            "type": "element",
            "expression": "Procedure"
        }
    ],
    "type": "Extension",
    "baseDefinition": "http://hl7.org/fhir/StructureDefinition/Extension",
    "derivation": "constraint",
    "differential": {
        "element":  [
            {
                "id": "Extension",
                "path": "Extension",
                "short": "MII EX Onko Strahlentherapie Bestrahlung",
                "definition": "Strahlentherapie: einzelne Bestrahlung innerhalb der Gesamttherapie"
            },
            {
                "id": "Extension.extension",
                "path": "Extension.extension",
                "min": 3
            },
            {
                "id": "Extension.extension:Applikationsart",
                "path": "Extension.extension",
                "sliceName": "Applikationsart",
                "short": "Strahlentherapie Applikationsart",
                "definition": "Gibt an, mit welcher Technik die Strahlentherapie durchgeführt wurde.",
                "min": 1,
                "max": "1",
                "mustSupport": true
            },
            {
                "id": "Extension.extension:Applikationsart.extension",
                "path": "Extension.extension.extension",
                "max": "0"
            },
            {
                "id": "Extension.extension:Applikationsart.url",
                "path": "Extension.extension.url",
                "fixedUri": "Applikationsart"
            },
            {
                "id": "Extension.extension:Applikationsart.value[x]",
                "path": "Extension.extension.value[x]",
                "type":  [
                    {
                        "code": "CodeableConcept"
                    }
                ],
                "binding": {
                    "strength": "required",
                    "valueSet": "https://www.medizininformatik-initiative.de/fhir/ext/modul-onko/ValueSet/mii-vs-onko-sstrahlentherapie-applikationsart"
                }
            },
            {
                "id": "Extension.extension:Strahlenart",
                "path": "Extension.extension",
                "sliceName": "Strahlenart",
                "short": "Strahlentherapie Strahlenart",
                "definition": "Gibt an, mit welcher Strahlenart (sowohl Strahlung als auch Metabolite) die Strahlentherapie durchgeführt wurde.",
                "min": 1,
                "max": "1",
                "mustSupport": true
            },
            {
                "id": "Extension.extension:Strahlenart.extension",
                "path": "Extension.extension.extension",
                "max": "0"
            },
            {
                "id": "Extension.extension:Strahlenart.url",
                "path": "Extension.extension.url",
                "fixedUri": "Strahlenart"
            },
            {
                "id": "Extension.extension:Strahlenart.value[x]",
                "path": "Extension.extension.value[x]",
                "type":  [
                    {
                        "code": "CodeableConcept"
                    }
                ],
                "binding": {
                    "strength": "required",
                    "valueSet": "https://www.medizininformatik-initiative.de/fhir/ext/modul-onko/ValueSet/mii-vs-strahlentherapie-strahlenart"
                }
            },
            {
                "id": "Extension.extension:Zielgebiet",
                "path": "Extension.extension",
                "sliceName": "Zielgebiet",
                "short": "Strahlentherapie Zielgebiet",
                "definition": "Gibt an, an welcher anatomischen Region die Bestrahlung durchgeführt wurde.",
                "min": 1,
                "max": "1",
                "mustSupport": true
            },
            {
                "id": "Extension.extension:Zielgebiet.extension",
                "path": "Extension.extension.extension",
                "max": "0"
            },
            {
                "id": "Extension.extension:Zielgebiet.url",
                "path": "Extension.extension.url",
                "fixedUri": "Zielgebiet"
            },
            {
                "id": "Extension.extension:Zielgebiet.value[x]",
                "path": "Extension.extension.value[x]",
                "type":  [
                    {
                        "code": "CodeableConcept"
                    }
                ],
                "binding": {
                    "strength": "required",
                    "valueSet": "https://www.medizininformatik-initiative.de/fhir/ext/modul-onko/ValueSet/mii-vs-strahlentherapie-zielgebiet"
                }
            },
            {
                "id": "Extension.extension:Zielgebiet_Lateralitaet",
                "path": "Extension.extension",
                "sliceName": "Zielgebiet_Lateralitaet",
                "short": "Seitenlokalisation Zielgebietes",
                "definition": "Gibt Seitenlokalisation des Zielgebietes an. Bei beidseitiger Bestrahlung paariger Organe sind die Bestrahlungen einzeln zu melden.",
                "min": 0,
                "max": "1",
                "mustSupport": true
            },
            {
                "id": "Extension.extension:Zielgebiet_Lateralitaet.extension",
                "path": "Extension.extension.extension",
                "max": "0"
            },
            {
                "id": "Extension.extension:Zielgebiet_Lateralitaet.url",
                "path": "Extension.extension.url",
                "fixedUri": "Zielgebiet_Lateralitaet"
            },
            {
                "id": "Extension.extension:Zielgebiet_Lateralitaet.value[x]",
                "path": "Extension.extension.value[x]",
                "type":  [
                    {
                        "code": "CodeableConcept"
                    }
                ],
                "binding": {
                    "strength": "required",
                    "valueSet": "https://www.medizininformatik-initiative.de/fhir/ext/modul-onko/ValueSet/mii-vs-onko-seitenlokalisation"
                }
            },
            {
                "id": "Extension.extension:Gesamtdosis",
                "path": "Extension.extension",
                "sliceName": "Gesamtdosis",
                "short": "Strahlentherapie Gesamtdosis (Dosis)",
                "definition": "Gibt an, mit welcher Gesamtdosis da Zielgebiet bestrahlt wurde (inklusive Boost).",
                "min": 0,
                "max": "1",
                "mustSupport": true
            },
            {
                "id": "Extension.extension:Gesamtdosis.extension",
                "path": "Extension.extension.extension",
                "max": "0"
            },
            {
                "id": "Extension.extension:Gesamtdosis.url",
                "path": "Extension.extension.url",
                "fixedUri": "Gesamtdosis"
            },
            {
                "id": "Extension.extension:Gesamtdosis.value[x]",
                "path": "Extension.extension.value[x]",
                "type":  [
                    {
                        "code": "Quantity"
                    }
                ],
                "binding": {
                    "strength": "required",
                    "valueSet": "https://www.medizininformatik-initiative.de/fhir/ext/modul-onko/ValueSet/mii-vs-strahlentherapie-strahlungseinheit"
                }
            },
            {
                "id": "Extension.extension:Gesamtdosis.value[x].system",
                "path": "Extension.extension.value[x].system",
                "patternUri": "http://unitsofmeasure.org"
            },
            {
                "id": "Extension.extension:Einzeldosis",
                "path": "Extension.extension",
                "sliceName": "Einzeldosis",
                "short": "Strahlentherapie Einzeldosis pro Tag (Dosis)",
                "definition": "Gibt an, mit welcher Einzeldosis (häufigste Dosis, nicht Boost) pro Tag das Zielgebiet bestrahlt wurde.",
                "min": 0,
                "max": "1",
                "mustSupport": true
            },
            {
                "id": "Extension.extension:Einzeldosis.extension",
                "path": "Extension.extension.extension",
                "max": "0"
            },
            {
                "id": "Extension.extension:Einzeldosis.url",
                "path": "Extension.extension.url",
                "fixedUri": "Einzeldosis"
            },
            {
                "id": "Extension.extension:Einzeldosis.value[x]",
                "path": "Extension.extension.value[x]",
                "type":  [
                    {
                        "code": "Quantity"
                    }
                ],
                "binding": {
                    "strength": "required",
                    "valueSet": "https://www.medizininformatik-initiative.de/fhir/ext/modul-onko/ValueSet/mii-vs-strahlentherapie-strahlungseinheit"
                }
            },
            {
                "id": "Extension.extension:Einzeldosis.value[x].system",
                "path": "Extension.extension.value[x].system",
                "patternUri": "http://unitsofmeasure.org"
            },
            {
                "id": "Extension.extension:Boost",
                "path": "Extension.extension",
                "sliceName": "Boost",
                "short": "Strahlentherapie Boost",
                "definition": "Angabe, ob ein Boost und falls ja, welche Art von Boost appliziert wurde.",
                "min": 0,
                "max": "1",
                "mustSupport": true
            },
            {
                "id": "Extension.extension:Boost.extension",
                "path": "Extension.extension.extension",
                "max": "0"
            },
            {
                "id": "Extension.extension:Boost.url",
                "path": "Extension.extension.url",
                "fixedUri": "Boost"
            },
            {
                "id": "Extension.extension:Boost.value[x]",
                "path": "Extension.extension.value[x]",
                "type":  [
                    {
                        "code": "CodeableConcept"
                    }
                ],
                "binding": {
                    "strength": "required",
                    "valueSet": "https://www.medizininformatik-initiative.de/fhir/ext/modul-onko/ValueSet/mii-vs-onko-strahlentherapie-boost"
                }
            },
            {
                "id": "Extension.url",
                "path": "Extension.url",
                "fixedUri": "https://www.medizininformatik-initiative.de/fhir/ext/modul-onko/StructureDefinition/mii-ex-onko-strahlentherapie-bestrahlung"
            },
            {
                "id": "Extension.value[x]",
                "path": "Extension.value[x]",
                "max": "0"
            }
        ]
    }
}

MII EX Onko Strahlentherapie Bestrahlung