The business identifier for this task.

The URL pointing to a FHIR-defined protocol, guideline, orderset or other definition that is adhered to in whole or in part by this Task.

Enables a formal definition of how he task is to be performed, enabling automation.

see Canonical References

The URL pointing to an externally maintained protocol, guideline, orderset or other definition that is adhered to in whole or in part by this Task.

Enables a formal definition of how he task is to be performed (e.g. using BPMN, BPEL, XPDL or other formal notation to be associated with a task), enabling automation.

see http://en.wikipedia.org/wiki/Uniform_resource_identifier

BasedOn refers to a higher-level authorization that triggered the creation of the task. It references a "request" resource such as a ServiceRequest, MedicationRequest, ServiceRequest, CarePlan, etc. which is distinct from the "request" resource the task is seeking to fulfill. This latter resource is referenced by FocusOn. For example, based on a ServiceRequest (= BasedOn), a task is created to fulfill a procedureRequest ( = FocusOn ) to collect a specimen from a patient.

References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.

An identifier that links together multiple tasks and other requests that were created in the same context.

Billing and/or reporting can be linked to whether multiple requests were created as a single unit.

Task that this particular task is part of.

Allows tasks to be broken down into sub-steps (and this division can occur independent of the original task).

This should usually be 0..1.

The current status of the task.

These states enable coordination of task status with off-the-shelf workflow solutions that support automation of tasks.

Note that FHIR strings SHALL NOT exceed 1MB in size

The current status of the task.

An explanation as to why this task is held, failed, was refused, etc.

This applies to the current status. Look at the history of the task to see reasons for past statuses.

Codes to identify the reason for current status. These will typically be specific to a particular workflow.

Contains business-specific nuances of the business state.

There's often a need to track substates of a task - this is often variable by specific workflow implementation.

Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination.

The domain-specific business-contextual sub-state of the task. For example: "Blood drawn", "IV inserted", "Awaiting physician signature", etc.

Indicates the "level" of actionability associated with the Task, i.e. i+R[9]Cs this a proposed task, a planned task, an actionable task, etc.

This element is immutable. Proposed tasks, planned tasks, etc. must be distinct instances.

In most cases, Tasks will have an intent of "order".

Distinguishes whether the task is a proposal, plan or full order.

Indicates how quickly the Task should be addressed with respect to other requests.

Used to identify the service level expected while performing a task.

Note that FHIR strings SHALL NOT exceed 1MB in size

If missing, this task should be performed with normal priority

The task's priority.

A name or code (or both) briefly describing what the task involves.

The title (eg "My Tasks", "Outstanding Tasks for Patient X") should go into the code.

Codes to identify what the task involves. These will typically be specific to a particular workflow.

A free-text description of what is to be performed.

Note that FHIR strings SHALL NOT exceed 1MB in size

The request being actioned or the resource being manipulated by this task.

Used to identify the thing to be done.

If multiple resources need to be manipulated, use sub-tasks. (This ensures that status can be tracked independently for each referenced resource.).

The entity who benefits from the performance of the service specified in the task (e.g., the patient).

Used to track tasks outstanding for a beneficiary. Do not use to track the task owner or creator (see owner and creator respectively). This can also affect access control.

References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.

The healthcare event (e.g. a patient and healthcare provider interaction) during which this task was created.

For some tasks it may be important to know the link between the encounter the task originated within.

References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.

Identifies the time action was first taken against the task (start) and/or the time final action was taken against the task prior to marking it as completed (end).

A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times").

Period is not used for a duration (a measure of elapsed time). See Duration.

The date and time this task was created.

Most often used along with lastUpdated to track duration of task to supporting monitoring and management.

The date and time of last modification to this task.

Used along with history to track task activity and time in a particular task state. This enables monitoring and management.

The creator of the task.

Identifies who created this task. May be used by access control mechanisms (e.g., to ensure that only the creator can cancel a task).

References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.

The kind of participant that should perform the task.

Use to distinguish tasks on different activity queues.

Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination.

The type(s) of task performers allowed.

Individual organization or Device currently responsible for task execution.

Identifies who is expected to perform this task.

Tasks may be created with an owner not yet identified.

Principal physical location where the this task is performed.

Ties the event to where the records are likely kept and provides context around the event occurrence (e.g. if it occurred inside or outside a dedicated healthcare setting).

References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.

A description or code indicating why this task needs to be performed.

This should only be included if there is no focus or if it differs from the reason indicated on the focus.

Indicates why the task is needed. E.g. Suspended because patient admitted to hospital.

A resource reference indicating why this task needs to be performed.

Tasks might be justified based on an Observation, a Condition, a past or planned procedure, etc. This should only be included if there is no focus or if it differs from the reason indicated on the focus. Use the CodeableConcept text element in Task.reasonCode if the data is free (uncoded) text.

Insurance plans, coverage extensions, pre-authorizations and/or pre-determinations that may be relevant to the Task.

References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.

Free-text information captured about the task as it progresses.

For systems that do not have structured annotations, they can simply communicate a single annotation with no author or time. This element may need to be included in narrative because of the potential for modifying information. Annotations SHOULD NOT be used to communicate "modifying" information that could be computable. (This is a SHOULD because enforcing user behavior is nearly impossible).

Links to Provenance records for past versions of this Task that identify key state transitions or updates that are likely to be relevant to a user looking at the current version of the task.

This element does not point to the Provenance associated with the current version of the resource - as it would be created after this version existed. The Provenance for the current version can be retrieved with a _revinclude.

Indicates the number of times the requested action should occur.

E.g. order that requests monthly lab tests, fulfillment is sought for 1.

32 bit number; for values larger than this, use decimal

Over what time-period is fulfillment sought.

E.g. order that authorizes 1 year's services. Fulfillment is sought for next 3 months.

Note that period.high is the due date representing the time by which the task should be completed.

For requests that are targeted to more than on potential recipient/target, for whom is fulfillment sought?

References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.

A code or description indicating how the input is intended to be used as part of the task execution.

Inputs are named to enable task automation to bind data and pass it from one task to the next.

If referencing a BPMN workflow or Protocol, the "system" is the URL for the workflow definition and the code is the "name" of the required input.

Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Comparison source", "Applicable consent", "Concomitent Medications", etc.

The name of the Output parameter.

Outputs are named to enable task automation to bind data and pass it from one task to the next.

Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination.

Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Identified issues", "Preliminary results", "Filler order", "Final results", etc.