ePA Medication (ePA R3.1) | EPA Dosage

EPADosage (Dosage)			Dosage	There are no (further) constraints on this element Element id Dosage Short description How the medication is/was taken or should be taken Definition Indicates how the medication is/was taken or should be taken by the patient. Data type Dosage Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: .outboundRelationship[typeCode=COMP].target[classCode=SBADM, moodCode=INT]
id		0..1	string	There are no (further) constraints on this element Element id Dosage.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Dosage.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id Dosage.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: N/A
sequence	Σ	0..1	integer	There are no (further) constraints on this element Element id Dosage.sequence Short description The order of the dosage instructions Definition Indicates the order in which the dosage instructions should be applied or interpreted. Requirements If the sequence number of multiple Dosages is the same, then it is implied that the instructions are to be treated as concurrent. If the sequence number is different, then the Dosages are intended to be sequential. Data type integer Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: TQ1-1 rim: .text
text	S Σ	0..1	string	Element id Dosage.text Short description Free text dosage instructions e.g. SIG Definition Hier kann die Dosieranweisung in Form eines Freitextes abgebildet werden. Requirements Free text dosage instructions can be used for cases where the instructions are too complex to code. The content of this attribute does not include the name or description of the medication. When coded instructions are present, the free text instructions may still be present for display to humans taking or administering the medication. It is expected that the text instructions will always be populated. If the dosage.timing attribute is also populated, then the dosage.text should reflect the same information as the timing. Additional information about administration or preparation of the medication should be included as text. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: RXO-6; RXE-21 rim: .text
additionalInstruction	S Σ	0..*	CodeableConcept	Element id Dosage.additionalInstruction Short description Supplemental instruction or warnings to the patient - e.g. "with meals", "may cause drowsiness" Definition Hier wird eine ergänzende Anweisung anhand eines entsprechenden Codes oder alternativ mit einem Freitext angegeben. Requirements Additional instruction is intended to be coded, but where no code exists, the element could include text. For example, "Swallow with plenty of water" which might or might not be coded. Comments Information about administration or preparation of the medication (e.g. "infuse as rapidly as possibly via intraperitoneal port" or "immediately following drug x") should be populated in dosage.text. Data type CodeableConcept Binding A coded concept identifying additional instructions such as "take with water" or "avoid operating heavy machinery". SNOMEDCTAdditionalDosageInstructions (example) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: RXO-7 rim: .text
id		0..1	string	There are no (further) constraints on this element Element id Dosage.additionalInstruction.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Dosage.additionalInstruction.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a
coding	S Σ	0..*	Coding	Element id Dosage.additionalInstruction.coding Short description Code defined by a terminology system Definition Hier werden Codes angegeben. Requirements Allows for alternative encodings within a code system, and translations to other code systems. Comments Das MustSupport gilt nur für die vordefinierten Slices. Data type Coding Sliced: Unordered, Open, by $this(Pattern) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: CE.1-8, CE.10-22 rim: union(., ./translation) orim: fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
snomed	S Σ	0..1	CodingBindingPattern	Element id Dosage.additionalInstruction.coding:snomed Short description Code defined by a terminology system Definition A reference to a code defined by a terminology system. Requirements Allows for alternative encodings within a code system, and translations to other code systems. Comments Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. Data type Coding Binding EPAAdditionalDosageInstructionsSNOMEDCTVS (extensible) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Pattern { "system": "http://snomed.info/sct" } Mappings v2: CE.1-8, CE.10-22 rim: union(., ./translation) orim: fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
id		0..1	string	There are no (further) constraints on this element Element id Dosage.additionalInstruction.coding:snomed.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Dosage.additionalInstruction.coding:snomed.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a
system	S Σ	1..1	uriPattern	There are no (further) constraints on this element Element id Dosage.additionalInstruction.coding:snomed.system Short description Identity of the terminology system Definition The identification of the code system that defines the meaning of the symbol in the code. Requirements Need to be unambiguous about the source of the definition of the symbol. Comments The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Pattern http://snomed.info/sct Mappings v2: CE.3 rim:* ./codeSystem orim: fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem
version	S Σ	1..1	string	There are no (further) constraints on this element Element id Dosage.additionalInstruction.coding:snomed.version Short description Version of the system - if relevant Definition The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged. Comments Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: CE.7 rim:* ./codeSystemVersion orim: fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion
code	S Σ	1..1	code	There are no (further) constraints on this element Element id Dosage.additionalInstruction.coding:snomed.code Short description Symbol in syntax defined by the system Definition A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination). Requirements Need to refer to a particular code in the system. Data type code Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: CE.1 rim:* ./code orim: fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code
display	S Σ	1..1	string	There are no (further) constraints on this element Element id Dosage.additionalInstruction.coding:snomed.display Short description Representation defined by the system Definition A representation of the meaning of the code in the system, following the rules of the system. Requirements Need to be able to carry a human-readable meaning of the code for readers that do not know the system. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: CE.2 - but note this is not well followed rim:* CV.displayName orim: fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName
userSelected	Σ	0..1	boolean	There are no (further) constraints on this element Element id Dosage.additionalInstruction.coding:snomed.userSelected Short description If this coding was chosen directly by the user Definition Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays). Requirements This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing. Comments Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely. Data type boolean Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: Sometimes implied by being first rim: CD.codingRationale orim: fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]
text	S Σ	0..1	string	Element id Dosage.additionalInstruction.text Short description Plain text representation of the concept Definition Hier wird ein Freitext eingetragen. Requirements The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source. Comments Very often the text is the same as a displayName of one of the codings. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: CE.9. But note many systems use CE.2 for this rim: ./originalText[mediaType/code="text/plain"]/data orim: fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText
patientInstruction	S Σ	0..1	string	Element id Dosage.patientInstruction Short description Patient or consumer oriented instructions Definition Hier können Hinweise zu Anwendung, Lagerung, Einnahme, etc. bzw. eine Gebrauchsanweisung in patientenverständlicher Sprache abgebildet werden. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: RXO-7 rim: .text
timing	S Σ	0..1	Timing	There are no (further) constraints on this element Element id Dosage.timing Short description When medication should be administered Definition When medication should be administered. Requirements The timing schedule for giving the medication to the patient. This data type allows many different expressions. For example: "Every 8 hours"; "Three times a day"; "1/2 an hour before breakfast for 10 days from 23-Dec 2011:"; "15 Oct 2013, 17 Oct 2013 and 1 Nov 2013". Sometimes, a rate can imply duration when expressed as total volume / duration (e.g. 500mL/2 hours implies a duration of 2 hours). However, when rate doesn't imply duration (e.g. 250mL/hour), then the timing.repeat.duration is needed to convey the infuse over time period. Comments This attribute might not always be populated while the Dosage.text is expected to be populated. If both are populated, then the Dosage.text should reflect the content of the Dosage.timing. Data type Timing Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: .effectiveTime
id		0..1	string	There are no (further) constraints on this element Element id Dosage.timing.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Dosage.timing.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id Dosage.timing.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: N/A
event	S Σ	0..*	dateTime	Element id Dosage.timing.event Short description When the event occurs Definition Hier kann ein Zeitpunkt einer Verabreichung/Einnahme abgebildet werden. Requirements In a Medication Administration Record, for instance, you need to take a general specification, and turn it into a precise specification. Data type dateTime Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: QLIST<TS>
repeat	S Σ I	0..1	Element	Element id Dosage.timing.repeat Short description When the event is to occur Definition Hier kann angegeben werden, über welche Zeitspanne eine einzelne Verabreichung/Einnahme durchgeführt wird. Dabei müssen stets Wert und Einheit der Zeitspanne angegeben werden. Optional kann zusätzlich zu einer Zeitspanne eine maximale Zeitspanne für eine einzelne Verabreichung/Einnahme angegeben werden. Beispiel: Die Dosierung der einzelnen Verabreichung/Einnahme eines Arzneimittels erfolgt über die Zeitspanne von 1 Stunde (1h). Requirements Many timing schedules are determined by regular repetitions. Data type Element Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` tim-1: if there's a duration, there needs to be duration units `duration.empty() or durationUnit.exists()` tim-2: if there's a period, there needs to be period units `period.empty() or periodUnit.exists()` tim-4: duration SHALL be a non-negative value `duration.exists() implies duration >= 0` tim-5: period SHALL be a non-negative value `period.exists() implies period >= 0` tim-6: If there's a periodMax, there must be a period `periodMax.empty() or period.exists()` tim-7: If there's a durationMax, there must be a duration `durationMax.empty() or duration.exists()` tim-8: If there's a countMax, there must be a count `countMax.empty() or count.exists()` tim-9: If there's an offset, there must be a when (and not C, CM, CD, CV) `offset.empty() or (when.exists() and ((when in ('C' \| 'CM' \| 'CD' \| 'CV')).not()))` tim-10: If there's a timeOfDay, there cannot be a when, or vice versa `timeOfDay.empty() or when.empty()` Mappings rim: Implies PIVL or EIVL
id		0..1	string	There are no (further) constraints on this element Element id Dosage.timing.repeat.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Dosage.timing.repeat.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a
bounds[x]	S Σ	1..1		Element id Dosage.timing.repeat.bounds[x] Short description Length/Range of lengths, or (Start and/or end) limits Definition Hier wird abgebildet, in welchem Zeitraum oder in welcher Zeitspanne das Arzneimittel in der spezifischen Dosierung verabreicht/eingenommen wird. Zum Beispiel können hiermit spezifische Zeiträume bei der Auf- oder Ab-Dosierung von Medikamenten abgebildet werden. Sliced: Unordered, Open, by $this(Type) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: IVL(TS) used in a QSI
boundsDuration	S Σ	0..1	Duration	Element id Dosage.timing.repeat.bounds[x]:boundsDuration Short description Length/Range of lengths, or (Start and/or end) limits Definition Hier kann angegeben, in welcher festen Zeitspanne das Arzneimittel in der spezifischen Dosierung verabreicht/eingenommen wird. Dabei beginnt und endet der mögliche Zeitraum der Einnahme in dem Zeitraum, welcher innerhalb des Elements "Verabreichung/Einnahme: Zeitangabe-Auswahl" -> "Zeitraum" auf der obersten Ebene des Profils "Medikations-Information" definiert ist. Beispiel: Die Verabreichung/Einnahme eines Arzneimittels erfolgt für 5 Tage, wobei der unter "Verabreichung/Einnahme: Zeitangabe-Auswahl" -> "Zeitraum" -> "von" / "bis" definierte Zeitraum am 01.01.2024 beginnt (Element "von") und am 10.01.2024 (Element "bis") endet. Innerhalb dieses Zeitraums erfolgt die Einnahme für 5 Tage. Data type Duration Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: IVL(TS) used in a QSI
id		0..1	string	There are no (further) constraints on this element Element id Dosage.timing.repeat.bounds[x]:boundsDuration.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Dosage.timing.repeat.bounds[x]:boundsDuration.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a
value	S Σ	1..1	decimal	Element id Dosage.timing.repeat.bounds[x]:boundsDuration.value Short description Numerical value (with implicit precision) Definition Hier kann der Wert der Zeitspanne angegeben werden, innerhalb der das Arzneimittel verabreicht/eingenommen wird. Requirements Precision is handled implicitly in almost all cases of measurement. Comments The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books). Data type decimal Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: SN.2 / CQ - N/A rim: PQ.value, CO.value, MO.value, IVL.high or IVL.low depending on the value
comparator	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element id Dosage.timing.repeat.bounds[x]:boundsDuration.comparator Short description < \| <= \| >= \| > - how to understand the value Definition How the value should be understood and represented - whether the actual value is greater or less than the stated value due to measurement issues; e.g. if the comparator is "<" , then the real value is < stated value. Requirements Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology. Meaning when missing If there is no comparator, then there is no modification of the value Data type code Binding How the Quantity should be understood and represented. QuantityComparator (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: SN.1 / CQ.1 rim: IVL properties
unit	S Σ	1..1	string	Element id Dosage.timing.repeat.bounds[x]:boundsDuration.unit Short description Unit representation Definition Hier wird die Zeiteinheit in menschenlesbarer Sprache angegeben. Requirements There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: (see OBX.6 etc.) / CQ.2 rim: PQ.unit
system	S Σ I	1..1	uri	There are no (further) constraints on this element Element id Dosage.timing.repeat.bounds[x]:boundsDuration.system Short description System that defines coded unit form Definition The identification of the system that provides the coded form of the unit. Requirements Need to know the system that defines the coded form of the unit. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: (see OBX.6 etc.) / CQ.2 rim: CO.codeSystem, PQ.translation.codeSystem
code	S Σ	1..1	code	Element id Dosage.timing.repeat.bounds[x]:boundsDuration.code Short description Coded form of the unit Definition Hier wird die Zeiteinheit als Code angegeben. Requirements Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest. Comments The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system. Data type code Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: (see OBX.6 etc.) / CQ.2 rim: PQ.code, MO.currency, PQ.translation.code
boundsRange	S Σ	0..1	Range	Element id Dosage.timing.repeat.bounds[x]:boundsRange Short description Length/Range of lengths, or (Start and/or end) limits Definition Hier kann angegeben, in welcher variablen Zeitspanne das Arzneimittel in der spezifischen Dosierung verabreicht/eingenommen wird. Dabei beginnt und endet der mögliche Zeitraum der Einnahme in dem Zeitraum, welcher innerhalb des Elements "Verabreichung/Einnahme: Zeitangabe-Auswahl" -> "Zeitraum" auf der obersten Ebene des Profils "Medikations-Information" definiert ist. Beispiel: Die Verabreichung/Einnahme eines Arzneimittels erfolgt für 3 Tage (Untergrenze der Zeitspanne) bis 5 Tage (Obergrenze der Zeitspanne), wobei der unter "Verabreichung/Einnahme: Zeitangabe-Auswahl" -> "Zeitraum" -> "von" / "bis" definierte Zeitraum am 01.01.2024 beginnt (Element "von") und am 10.01.2024 (Element "bis") endet. Innerhalb dieses Zeitraums erfolgt die Einnahme für 3 Tage bis 5 Tage. Data type Range Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: IVL(TS) used in a QSI
id		0..1	string	There are no (further) constraints on this element Element id Dosage.timing.repeat.bounds[x]:boundsRange.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Dosage.timing.repeat.bounds[x]:boundsRange.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a
low	S Σ	0..1	SimpleQuantity	Element id Dosage.timing.repeat.bounds[x]:boundsRange.low Short description Low limit Definition Hier wird die Untergrenze der variablen Zeitspanne abgebildet. Comments If the low element is missing, the low boundary is not known. Data type SimpleQuantity Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: NR.1 rim: ./low
id		0..1	string	There are no (further) constraints on this element Element id Dosage.timing.repeat.bounds[x]:boundsRange.low.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Dosage.timing.repeat.bounds[x]:boundsRange.low.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a
value	S Σ	1..1	decimal	Element id Dosage.timing.repeat.bounds[x]:boundsRange.low.value Short description Numerical value (with implicit precision) Definition Hier kann der Wert der Zeitspanne angegeben werden, innerhalb der das Arzneimittel verabreicht/eingenommen wird. Requirements Precision is handled implicitly in almost all cases of measurement. Comments The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books). Data type decimal Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: SN.2 / CQ - N/A rim: PQ.value, CO.value, MO.value, IVL.high or IVL.low depending on the value
comparator	Σ ?!	0..0	codeBinding	There are no (further) constraints on this element Element id Dosage.timing.repeat.bounds[x]:boundsRange.low.comparator Short description < \| <= \| >= \| > - how to understand the value Definition Not allowed to be used in this context Requirements Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology. Meaning when missing If there is no comparator, then there is no modification of the value Data type code Binding How the Quantity should be understood and represented. QuantityComparator (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: SN.1 / CQ.1 rim: IVL properties
unit	S Σ	1..1	string	Element id Dosage.timing.repeat.bounds[x]:boundsRange.low.unit Short description Unit representation Definition Hier wird die Zeiteinheit in menschenlesbarer Sprache angegeben. Requirements There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: (see OBX.6 etc.) / CQ.2 rim: PQ.unit
system	S Σ I	1..1	uri	There are no (further) constraints on this element Element id Dosage.timing.repeat.bounds[x]:boundsRange.low.system Short description System that defines coded unit form Definition The identification of the system that provides the coded form of the unit. Requirements Need to know the system that defines the coded form of the unit. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: (see OBX.6 etc.) / CQ.2 rim: CO.codeSystem, PQ.translation.codeSystem
code	S Σ	1..1	code	Element id Dosage.timing.repeat.bounds[x]:boundsRange.low.code Short description Coded form of the unit Definition Hier wird die Zeiteinheit als Code angegeben. Requirements Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest. Comments The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system. Data type code Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: (see OBX.6 etc.) / CQ.2 rim: PQ.code, MO.currency, PQ.translation.code
high	S Σ	0..1	SimpleQuantity	Element id Dosage.timing.repeat.bounds[x]:boundsRange.high Short description High limit Definition Hier wird die Obergrenze der variablen Zeitspanne abgebildet. Comments If the high element is missing, the high boundary is not known. Data type SimpleQuantity Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: NR.2 rim: ./high
id		0..1	string	There are no (further) constraints on this element Element id Dosage.timing.repeat.bounds[x]:boundsRange.high.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Dosage.timing.repeat.bounds[x]:boundsRange.high.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a
value	S Σ	1..1	decimal	Element id Dosage.timing.repeat.bounds[x]:boundsRange.high.value Short description Numerical value (with implicit precision) Definition Hier kann der Wert der Zeitspanne angegeben werden, innerhalb der das Arzneimittel verabreicht/eingenommen wird. Requirements Precision is handled implicitly in almost all cases of measurement. Comments The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books). Data type decimal Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: SN.2 / CQ - N/A rim: PQ.value, CO.value, MO.value, IVL.high or IVL.low depending on the value
comparator	Σ ?!	0..0	codeBinding	There are no (further) constraints on this element Element id Dosage.timing.repeat.bounds[x]:boundsRange.high.comparator Short description < \| <= \| >= \| > - how to understand the value Definition Not allowed to be used in this context Requirements Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology. Meaning when missing If there is no comparator, then there is no modification of the value Data type code Binding How the Quantity should be understood and represented. QuantityComparator (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: SN.1 / CQ.1 rim: IVL properties
unit	S Σ	1..1	string	Element id Dosage.timing.repeat.bounds[x]:boundsRange.high.unit Short description Unit representation Definition Hier wird die Zeiteinheit in menschenlesbarer Sprache angegeben. Requirements There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: (see OBX.6 etc.) / CQ.2 rim: PQ.unit
system	S Σ I	1..1	uri	There are no (further) constraints on this element Element id Dosage.timing.repeat.bounds[x]:boundsRange.high.system Short description System that defines coded unit form Definition The identification of the system that provides the coded form of the unit. Requirements Need to know the system that defines the coded form of the unit. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: (see OBX.6 etc.) / CQ.2 rim: CO.codeSystem, PQ.translation.codeSystem
code	S Σ	1..1	code	Element id Dosage.timing.repeat.bounds[x]:boundsRange.high.code Short description Coded form of the unit Definition Hier wird die Zeiteinheit als Code angegeben. Requirements Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest. Comments The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system. Data type code Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: (see OBX.6 etc.) / CQ.2 rim: PQ.code, MO.currency, PQ.translation.code
boundsPeriod	S Σ	0..1	Period	Element id Dosage.timing.repeat.bounds[x]:boundsPeriod Short description Length/Range of lengths, or (Start and/or end) limits Definition Hier wird abgebildet, in welchem Zeitraum das Arzneimittel in der spezifischen Dosierung verabreicht/eingenommen wird. Beispiel: Abbildung spezifischer Zeiträume bei der Auf- oder Ab-Dosierung von Medikamenten unter Angabe von konkreten Datumsangaben. Data type Period Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: IVL(TS) used in a QSI
id		0..1	string	There are no (further) constraints on this element Element id Dosage.timing.repeat.bounds[x]:boundsPeriod.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Dosage.timing.repeat.bounds[x]:boundsPeriod.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a
start	S Σ I	1..1	dateTime	Element id Dosage.timing.repeat.bounds[x]:boundsPeriod.start Short description Starting time with inclusive boundary Definition Hier wird der Beginn des dosisspezifischen Zeitraumes angegeben. Comments If the low element is missing, the meaning is that the low boundary is not known. Data type dateTime Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: DR.1 rim: ./low
end	S Σ I	0..1	dateTime	Element id Dosage.timing.repeat.bounds[x]:boundsPeriod.end Short description End time with inclusive boundary, if not ongoing Definition Hier wird das Ende des dosisspezifischen Zeitraumes angegeben. Comments The high value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has an end value of 2012-02-03. Meaning when missing If the end of the period is missing, it means that the period is ongoing Data type dateTime Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: DR.2 rim: ./high
count	S Σ	0..1	positiveInt	Element id Dosage.timing.repeat.count Short description Number of times to repeat Definition Hier kann die absolute Anzahl der Wiederholungen einer Verabreichung/Einnahme eines Arzneimittels als Zahl angegeben werden. Beispiel: Anzahl der Einnahmen eines Arzneimittels = 5 Requirements Repetitions may be limited by end time or total occurrences. Comments If you have both bounds and count, then this should be understood as within the bounds period, until count times happens. Data type positiveInt Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: PIVL.count
countMax	S Σ	0..1	positiveInt	Element id Dosage.timing.repeat.countMax Short description Maximum number of times to repeat Definition Hier kann die maximale Anzahl der Wiederholungen einer Verabreichung/Einnahme eines Arzneimittels als Zahl angegeben werden. Eine maximale Anzahl der Wiederholungen kann nur angegeben werden, wenn eine absolute Anzahl der Wiederholungen einer Verabreichung/Einnahme eines Arzneimittels angegeben ist. Beispiel: Maximale Anzahl der Einnahmen eines Arzneimittels = 10 Data type positiveInt Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: PIVL.count
duration	S Σ	0..1	decimal	Element id Dosage.timing.repeat.duration Short description How long when it happens Definition Hier kann der Wert der Zeitspanne angegeben werden, innerhalb der das Arzneimittel verabreicht/eingenommen wird. Requirements Some activities are not instantaneous and need to be maintained for a period of time. Comments For some events the duration is part of the definition of the event (e.g. IV infusions, where the duration is implicit in the specified quantity and rate). For others, it's part of the timing specification (e.g. exercise). Data type decimal Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: PIVL.phase
durationMax	S Σ	0..1	decimal	Element id Dosage.timing.repeat.durationMax Short description How long when it happens (Max) Definition Hier kann der maximale Wert der Zeitspanne angegeben werden, innerhalb der das Arzneimittel verabreicht/eingenommen wird. Eine maximale Zeitspanne kann nur angegeben werden, wenn eine feste Zeitspanne für die Dauer der einzelnen Verabreichung/Einnahme angegeben wird. Requirements Some activities are not instantaneous and need to be maintained for a period of time. Comments For some events the duration is part of the definition of the event (e.g. IV infusions, where the duration is implicit in the specified quantity and rate). For others, it's part of the timing specification (e.g. exercise). Data type decimal Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: PIVL.phase
durationUnit	S Σ	0..1	codeBinding	Element id Dosage.timing.repeat.durationUnit Short description s \| min \| h \| d \| wk \| mo \| a - unit of time (UCUM) Definition Hier wird die Zeiteinheit angegeben. Data type code Binding A unit of time (units from UCUM). UnitsOfTime (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: PIVL.phase.unit
frequency	S Σ	0..1	positiveInt	Element id Dosage.timing.repeat.frequency Short description Event occurs frequency times per period Definition Hier wird angegeben, mit welcher Frequenz das Arzneimittel innerhalb einer bestimmten Zeitspanne verabreicht/eingenommen wird. Meaning when missing If no frequency is stated, the assumption is that the event occurs once per period, but systems SHOULD always be specific about this Data type positiveInt Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: PIVL.phase
frequencyMax	S Σ	0..1	positiveInt	Element id Dosage.timing.repeat.frequencyMax Short description Event occurs up to frequencyMax times per period Definition Hier wird angegeben, mit welcher Frequenz das Arzneimittel innerhalb einer bestimmten Zeitspanne verabreicht/eingenommen wird. Data type positiveInt Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: PIVL.phase
period	S Σ	0..1	decimal	Element id Dosage.timing.repeat.period Short description Event occurs frequency times per period Definition Hier wird der absolute Wert der Zeitspanne angegeben, innerhalb der die definierte Anzahl der Verabreichungen/Einnahmen durchgeführt wird. Data type decimal Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: PIVL.phase
periodMax	S Σ	0..1	decimal	Element id Dosage.timing.repeat.periodMax Short description Upper limit of period (3-4 hours) Definition Hier wird der maximale Wert der Zeitspanne angegeben, innerhalb der die definierte Anzahl der Verabreichungen/Einnahmen durchgeführt wird. Wenn ein maximaler Wert der Zeitspanne angegeben wird, muss ein absoluter Wert der Zeitspanne angegeben werden. In diesem Fall definieren die beiden Werte "Absoluter Wert der Zeitspanne" und "Maximaler Wert der Zeitspanne" einen Bereich für die Zeitspanne. Der absolute Wert der Zeitspanne entspricht dann der Untergrenze für einen Bereich der Zeitspanne und der maximale Wert der Zeitspanne der Obergrenze für den Bereich der Zeitspanne. Data type decimal Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: PIVL.phase
periodUnit	S Σ	0..1	codeBinding	Element id Dosage.timing.repeat.periodUnit Short description s \| min \| h \| d \| wk \| mo \| a - unit of time (UCUM) Definition Hier wird die Zeiteinheit angegeben. Data type code Binding A unit of time (units from UCUM). UnitsOfTime (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: PIVL.phase.unit
dayOfWeek	S Σ	0..*	codeBinding	Element id Dosage.timing.repeat.dayOfWeek Short description mon \| tue \| wed \| thu \| fri \| sat \| sun Definition Hier wird der Wochentag, an dem das Arzneimittel verabreicht/eingenommen werden soll, angegeben. Comments If no days are specified, the action is assumed to happen every day as otherwise specified. The elements frequency and period cannot be used as well as dayOfWeek. Data type code Binding DaysOfWeek (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
timeOfDay	S Σ	0..*	time	Element id Dosage.timing.repeat.timeOfDay Short description Time of day for action Definition Hier werden Uhrzeiten angegeben, zu denen das Arzneimittel verabreicht/eingenommen wird. Comments When time of day is specified, it is inferred that the action happens every day (as filtered by dayofWeek) on the specified times. The elements when, frequency and period cannot be used as well as timeOfDay. Data type time Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
when	S Σ	0..*	codeBinding	Element id Dosage.timing.repeat.when Short description Code for time period of occurrence Definition Hier werden Tageszeiten angegeben, zu denen das Arzneimittel verabreicht/eingenommen wird. Ergänzend können Zusatzinformationen angegeben werden, die die Verabreichung/Einnahme des Arzneimittels in Bezug zu Mahlzeiten und Schlafzeiten abbilden. Requirements Timings are frequently determined by occurrences such as waking, eating and sleep. Comments When more than one event is listed, the event is tied to the union of the specified events. Data type code Sliced: Unordered, Open, by $this(Pattern) Binding Real world event relating to the schedule. EventTiming (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: EIVL.event
period-of-day	S Σ	0..1	codeBinding	Element id Dosage.timing.repeat.when:period-of-day Short description Code for time period of occurrence Definition Hier werden Tageszeiten, zu denen das Arzneimittel verabreicht/eingenommen wird, als Code aus dem FHIR ValueSet http://hl7.org/fhir/ValueSet/event-timing angegeben. Dabei spiegeln die vier möglichen Konzepte "Morgens", "Mittags", "Abends", "Nachts" das in der Praxis übliche "4er-Einnahmeschema" wieder (beispielsweise "0-1-0-0" entspricht dem Konzept "Einnahme von einer Tablette Mittags"). Requirements Timings are frequently determined by occurrences such as waking, eating and sleep. Comments When more than one event is listed, the event is tied to the union of the specified events. Data type code Binding Real world event relating to the schedule. EPAEventTimingVS (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: EIVL.event
meal-sleep-times	S Σ	0..*	codeBinding	Element id Dosage.timing.repeat.when:meal-sleep-times Short description Code for time period of occurrence Definition Hier wird eine mahlzeiten- und schlafzeitenabhängige Zusatzinformation zur Einnahme eines Arzneimittels als Code aus dem FHIR ValueSet http://hl7.org/fhir/ValueSet/event-timing angegeben. Requirements Timings are frequently determined by occurrences such as waking, eating and sleep. Comments When more than one event is listed, the event is tied to the union of the specified events. Data type code Binding Real world event relating to the schedule. EPATimingEventVS (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: EIVL.event
offset	S Σ	0..1	unsignedInt	Element id Dosage.timing.repeat.offset Short description Minutes from event (before or after) Definition Hier wird der Zeitabstand der Verabreichung/Einnahme eines Arzneimittels zu einer Mahlzeit oder der Schlafzeit in Minuten angegeben. Data type unsignedInt Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: EIVL.offset
code	Σ	0..1	CodeableConceptBinding	There are no (further) constraints on this element Element id Dosage.timing.code Short description BID \| TID \| QID \| AM \| PM \| QD \| QOD \| + Definition A code for the timing schedule (or just text in code.text). Some codes such as BID are ubiquitous, but many institutions define their own additional codes. If a code is provided, the code is understood to be a complete statement of whatever is specified in the structured timing data, and either the code or the data may be used to interpret the Timing, with the exception that .repeat.bounds still applies over the code (and is not contained in the code). Comments BID etc. are defined as 'at institutionally specified times'. For example, an institution may choose that BID is "always at 7am and 6pm". If it is inappropriate for this choice to be made, the code BID should not be used. Instead, a distinct organization-specific code should be used in place of the HL7-defined BID code and/or a structured representation should be used (in this case, specifying the two event times). Data type CodeableConcept Binding Code for a known / defined timing pattern. TimingAbbreviation (preferred) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: QSC.code
asNeeded[x]	S Σ	0..1		Element id Dosage.asNeeded[x] Short description Take "as needed" (for x) Definition Hier werden Angaben zur Dosierung als Bedarfsmedikation gemacht. Comments Can express "as needed" without a reason by setting the Boolean = True. In this case the CodeableConcept is not populated. Or you can express "as needed" with a reason by including the CodeableConcept. In this case the Boolean is assumed to be True. If you set the Boolean to False, then the dose is given according to the schedule and is not "prn" or "as needed". Sliced: Unordered, Open, by $this(Type) Binding A coded concept identifying the precondition that should be met or evaluated prior to consuming or administering a medication dose. For example "pain", "30 minutes prior to sexual intercourse", "on flare-up" etc. SNOMEDCTMedicationAsNeededReasonCodes (example) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: TQ1-9 rim: .outboundRelationship[typeCode=PRCN].target[classCode=OBS, moodCode=EVN, code="as needed"].value=boolean or codable concept
asNeededBoolean	S Σ	0..1	boolean	Element id Dosage.asNeeded[x]:asNeededBoolean Short description Take "as needed" (for x) Definition Hier wird angegeben, ob es sich um eine Bedarfsmedikation handelt. Comments Can express "as needed" without a reason by setting the Boolean = True. In this case the CodeableConcept is not populated. Or you can express "as needed" with a reason by including the CodeableConcept. In this case the Boolean is assumed to be True. If you set the Boolean to False, then the dose is given according to the schedule and is not "prn" or "as needed". Data type boolean Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: TQ1-9 rim: .outboundRelationship[typeCode=PRCN].target[classCode=OBS, moodCode=EVN, code="as needed"].value=boolean or codable concept
asNeededCodeableConcept	S Σ	0..1	CodeableConcept	Element id Dosage.asNeeded[x]:asNeededCodeableConcept Short description Take "as needed" (for x) Definition Hier wird angegeben, welcher Zustand die Bedingung zur Verabreichung/Einnahme der Bedarfsmedikation ist, z. B. Schmerzen, Übelkeit, usw. Comments Can express "as needed" without a reason by setting the Boolean = True. In this case the CodeableConcept is not populated. Or you can express "as needed" with a reason by including the CodeableConcept. In this case the Boolean is assumed to be True. If you set the Boolean to False, then the dose is given according to the schedule and is not "prn" or "as needed". Data type CodeableConcept Binding A coded concept identifying the precondition that should be met or evaluated prior to consuming or administering a medication dose. For example "pain", "30 minutes prior to sexual intercourse", "on flare-up" etc. SNOMEDCTMedicationAsNeededReasonCodes (example) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: TQ1-9 rim: .outboundRelationship[typeCode=PRCN].target[classCode=OBS, moodCode=EVN, code="as needed"].value=boolean or codable concept
id		0..1	string	There are no (further) constraints on this element Element id Dosage.asNeeded[x]:asNeededCodeableConcept.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Dosage.asNeeded[x]:asNeededCodeableConcept.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a
coding	S Σ	0..*	Coding	Element id Dosage.asNeeded[x]:asNeededCodeableConcept.coding Short description Code defined by a terminology system Definition Hier werden Codes angegeben. Requirements Allows for alternative encodings within a code system, and translations to other code systems. Comments Das MustSupport gilt nur für die vordefinierten Slices. Data type Coding Sliced: Unordered, Open, by $this(Pattern) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: CE.1-8, CE.10-22 rim: union(., ./translation) orim: fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
snomed	S Σ	0..1	CodingBindingPattern	Element id Dosage.asNeeded[x]:asNeededCodeableConcept.coding:snomed Short description Code defined by a terminology system Definition Hier wird ein Code aus dem Code-System SNOMED CT® eingetragen. Die Bedingung zum Auslösen einer Bedarfsmedikation ist ein breites Feld, welches das gesamte Spektrum der Medizin umfassen kann und ist deshalb in FHIR® als Example-binding von SNOMED CT®-Konzepten in den Subklassen der SCTID 404684003 vorgesehen, siehe http://hl7.org/fhir/ValueSet/medication-as-needed-reason. Requirements Allows for alternative encodings within a code system, and translations to other code systems. Comments Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. Data type Coding Binding EPAPRNMedicationReasonSNOMEDCTVS (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Pattern { "system": "http://snomed.info/sct" } Mappings v2: CE.1-8, CE.10-22 rim: union(., ./translation) orim: fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
id		0..1	string	There are no (further) constraints on this element Element id Dosage.asNeeded[x]:asNeededCodeableConcept.coding:snomed.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Dosage.asNeeded[x]:asNeededCodeableConcept.coding:snomed.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a
system	S Σ	1..1	uriPattern	There are no (further) constraints on this element Element id Dosage.asNeeded[x]:asNeededCodeableConcept.coding:snomed.system Short description Identity of the terminology system Definition The identification of the code system that defines the meaning of the symbol in the code. Requirements Need to be unambiguous about the source of the definition of the symbol. Comments The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Pattern http://snomed.info/sct Mappings v2: CE.3 rim:* ./codeSystem orim: fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem
version	S Σ	1..1	string	There are no (further) constraints on this element Element id Dosage.asNeeded[x]:asNeededCodeableConcept.coding:snomed.version Short description Version of the system - if relevant Definition The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged. Comments Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: CE.7 rim:* ./codeSystemVersion orim: fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion
code	S Σ	1..1	code	There are no (further) constraints on this element Element id Dosage.asNeeded[x]:asNeededCodeableConcept.coding:snomed.code Short description Symbol in syntax defined by the system Definition A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination). Requirements Need to refer to a particular code in the system. Data type code Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: CE.1 rim:* ./code orim: fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code
display	S Σ	1..1	string	There are no (further) constraints on this element Element id Dosage.asNeeded[x]:asNeededCodeableConcept.coding:snomed.display Short description Representation defined by the system Definition A representation of the meaning of the code in the system, following the rules of the system. Requirements Need to be able to carry a human-readable meaning of the code for readers that do not know the system. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: CE.2 - but note this is not well followed rim:* CV.displayName orim: fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName
userSelected	Σ	0..1	boolean	There are no (further) constraints on this element Element id Dosage.asNeeded[x]:asNeededCodeableConcept.coding:snomed.userSelected Short description If this coding was chosen directly by the user Definition Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays). Requirements This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing. Comments Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely. Data type boolean Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: Sometimes implied by being first rim: CD.codingRationale orim: fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]
text	S Σ	0..1	string	Element id Dosage.asNeeded[x]:asNeededCodeableConcept.text Short description Plain text representation of the concept Definition Hier wird die Bedingung zur Verabreichung/Einnahme der Bedarfsmedikation als Freitext angegeben. Requirements The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source. Comments Very often the text is the same as a displayName of one of the codings. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: CE.9. But note many systems use CE.2 for this rim: ./originalText[mediaType/code="text/plain"]/data orim: fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText
site	S Σ	0..1	CodeableConcept	There are no (further) constraints on this element Element id Dosage.site Short description Body site to administer to Definition Body site to administer to. Requirements A coded specification of the anatomic site where the medication first enters the body. Comments If the use case requires attributes from the BodySite resource (e.g. to identify and track separately) then use the standard extension bodySite. May be a summary code, or a reference to a very precise definition of the location, or both. Data type CodeableConcept Binding A coded concept describing the site location the medicine enters into or onto the body. SNOMEDCTAnatomicalStructureForAdministrationSiteCodes (example) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: RXR-2 rim: .approachSiteCode
id		0..1	string	There are no (further) constraints on this element Element id Dosage.site.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Dosage.site.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a
coding	S Σ	0..*	Coding	Element id Dosage.site.coding Short description Code defined by a terminology system Definition A reference to a code defined by a terminology system. Requirements Allows for alternative encodings within a code system, and translations to other code systems. Comments Das MustSupport gilt nur für die vordefinierten Slices. Data type Coding Sliced: Unordered, Open, by $this(Pattern) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: CE.1-8, CE.10-22 rim: union(., ./translation) orim: fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
snomed	S Σ	0..1	CodingPattern	Element id Dosage.site.coding:snomed Short description Code defined by a terminology system Definition A reference to a code defined by a terminology system. Requirements Allows for alternative encodings within a code system, and translations to other code systems. Comments Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. Data type Coding Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Pattern { "system": "http://snomed.info/sct" } Mappings v2: CE.1-8, CE.10-22 rim: union(., ./translation) orim: fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
id		0..1	string	There are no (further) constraints on this element Element id Dosage.site.coding:snomed.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Dosage.site.coding:snomed.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a
system	S Σ	1..1	uriPattern	There are no (further) constraints on this element Element id Dosage.site.coding:snomed.system Short description Identity of the terminology system Definition The identification of the code system that defines the meaning of the symbol in the code. Requirements Need to be unambiguous about the source of the definition of the symbol. Comments The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Pattern http://snomed.info/sct Mappings v2: CE.3 rim:* ./codeSystem orim: fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem
version	S Σ	1..1	string	There are no (further) constraints on this element Element id Dosage.site.coding:snomed.version Short description Version of the system - if relevant Definition The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged. Comments Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: CE.7 rim:* ./codeSystemVersion orim: fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion
code	S Σ	1..1	code	There are no (further) constraints on this element Element id Dosage.site.coding:snomed.code Short description Symbol in syntax defined by the system Definition A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination). Requirements Need to refer to a particular code in the system. Data type code Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: CE.1 rim:* ./code orim: fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code
display	S Σ	1..1	string	There are no (further) constraints on this element Element id Dosage.site.coding:snomed.display Short description Representation defined by the system Definition A representation of the meaning of the code in the system, following the rules of the system. Requirements Need to be able to carry a human-readable meaning of the code for readers that do not know the system. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: CE.2 - but note this is not well followed rim:* CV.displayName orim: fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName
userSelected	Σ	0..1	boolean	There are no (further) constraints on this element Element id Dosage.site.coding:snomed.userSelected Short description If this coding was chosen directly by the user Definition Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays). Requirements This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing. Comments Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely. Data type boolean Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: Sometimes implied by being first rim: CD.codingRationale orim: fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]
text	S Σ	0..1	string	There are no (further) constraints on this element Element id Dosage.site.text Short description Plain text representation of the concept Definition A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user. Requirements The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source. Comments Very often the text is the same as a displayName of one of the codings. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: CE.9. But note many systems use CE.2 for this rim: ./originalText[mediaType/code="text/plain"]/data orim: fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText
route	S Σ	0..1	CodeableConcept	There are no (further) constraints on this element Element id Dosage.route Short description How drug should enter body Definition How drug should enter body. Requirements A code specifying the route or physiological path of administration of a therapeutic agent into or onto a patient's body. Data type CodeableConcept Binding A coded concept describing the route or physiological path of administration of a therapeutic agent into or onto the body of a subject. SNOMEDCTRouteCodes (example) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: RXR-1 rim: .routeCode
id		0..1	string	There are no (further) constraints on this element Element id Dosage.route.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Dosage.route.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a
coding	S Σ	0..*	Coding	Element id Dosage.route.coding Short description Code defined by a terminology system Definition A reference to a code defined by a terminology system. Requirements Allows for alternative encodings within a code system, and translations to other code systems. Comments Das MustSupport gilt nur für die vordefinierten Slices. Data type Coding Sliced: Unordered, Open, by $this(Pattern) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: CE.1-8, CE.10-22 rim: union(., ./translation) orim: fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
snomed	S Σ	0..1	CodingBindingPattern	Element id Dosage.route.coding:snomed Short description Code defined by a terminology system Definition A reference to a code defined by a terminology system. Requirements Allows for alternative encodings within a code system, and translations to other code systems. Comments Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. Data type Coding Binding EPARouteOfAdministrationSNOMEDCTVS (extensible) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Pattern { "system": "http://snomed.info/sct" } Mappings v2: CE.1-8, CE.10-22 rim: union(., ./translation) orim: fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
id		0..1	string	There are no (further) constraints on this element Element id Dosage.route.coding:snomed.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Dosage.route.coding:snomed.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a
system	S Σ	1..1	uriPattern	There are no (further) constraints on this element Element id Dosage.route.coding:snomed.system Short description Identity of the terminology system Definition The identification of the code system that defines the meaning of the symbol in the code. Requirements Need to be unambiguous about the source of the definition of the symbol. Comments The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Pattern http://snomed.info/sct Mappings v2: CE.3 rim:* ./codeSystem orim: fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem
version	S Σ	1..1	string	There are no (further) constraints on this element Element id Dosage.route.coding:snomed.version Short description Version of the system - if relevant Definition The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged. Comments Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: CE.7 rim:* ./codeSystemVersion orim: fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion
code	S Σ	1..1	code	There are no (further) constraints on this element Element id Dosage.route.coding:snomed.code Short description Symbol in syntax defined by the system Definition A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination). Requirements Need to refer to a particular code in the system. Data type code Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: CE.1 rim:* ./code orim: fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code
display	S Σ	1..1	string	There are no (further) constraints on this element Element id Dosage.route.coding:snomed.display Short description Representation defined by the system Definition A representation of the meaning of the code in the system, following the rules of the system. Requirements Need to be able to carry a human-readable meaning of the code for readers that do not know the system. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: CE.2 - but note this is not well followed rim:* CV.displayName orim: fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName
userSelected	Σ	0..1	boolean	There are no (further) constraints on this element Element id Dosage.route.coding:snomed.userSelected Short description If this coding was chosen directly by the user Definition Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays). Requirements This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing. Comments Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely. Data type boolean Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: Sometimes implied by being first rim: CD.codingRationale orim: fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]
edqm	S Σ	0..1	CodingBinding	Element id Dosage.route.coding:edqm Short description Code defined by a terminology system Definition A reference to a code defined by a terminology system. Requirements Allows for alternative encodings within a code system, and translations to other code systems. Comments Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. Data type Coding Binding EPAMedicineRouteOfAdministrationEDQMVS (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: CE.1-8, CE.10-22 rim: union(., ./translation) orim: fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
id		0..1	string	There are no (further) constraints on this element Element id Dosage.route.coding:edqm.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Dosage.route.coding:edqm.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a
system	S Σ	1..1	uri	There are no (further) constraints on this element Element id Dosage.route.coding:edqm.system Short description Identity of the terminology system Definition The identification of the code system that defines the meaning of the symbol in the code. Requirements Need to be unambiguous about the source of the definition of the symbol. Comments The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: CE.3 rim:* ./codeSystem orim: fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem
version	Σ	0..1	string	There are no (further) constraints on this element Element id Dosage.route.coding:edqm.version Short description Version of the system - if relevant Definition The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged. Comments Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: CE.7 rim:* ./codeSystemVersion orim: fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion
code	S Σ	1..1	code	There are no (further) constraints on this element Element id Dosage.route.coding:edqm.code Short description Symbol in syntax defined by the system Definition A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination). Requirements Need to refer to a particular code in the system. Data type code Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: CE.1 rim:* ./code orim: fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code
display	S Σ	1..1	string	There are no (further) constraints on this element Element id Dosage.route.coding:edqm.display Short description Representation defined by the system Definition A representation of the meaning of the code in the system, following the rules of the system. Requirements Need to be able to carry a human-readable meaning of the code for readers that do not know the system. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: CE.2 - but note this is not well followed rim:* CV.displayName orim: fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName
userSelected	Σ	0..1	boolean	There are no (further) constraints on this element Element id Dosage.route.coding:edqm.userSelected Short description If this coding was chosen directly by the user Definition Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays). Requirements This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing. Comments Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely. Data type boolean Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: Sometimes implied by being first rim: CD.codingRationale orim: fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]
text	S Σ	0..1	string	There are no (further) constraints on this element Element id Dosage.route.text Short description Plain text representation of the concept Definition A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user. Requirements The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source. Comments Very often the text is the same as a displayName of one of the codings. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: CE.9. But note many systems use CE.2 for this rim: ./originalText[mediaType/code="text/plain"]/data orim: fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText
method	Σ	0..1	CodeableConcept	There are no (further) constraints on this element Element id Dosage.method Short description Technique for administering medication Definition Technique for administering medication. Requirements A coded value indicating the method by which the medication is introduced into or onto the body. Most commonly used for injections. For examples, Slow Push; Deep IV. Comments Terminologies used often pre-coordinate this term with the route and or form of administration. Data type CodeableConcept Binding A coded concept describing the technique by which the medicine is administered. SNOMEDCTAdministrationMethodCodes (example) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: RXR-4 rim: .doseQuantity
doseAndRate	S Σ	0..1	Element	There are no (further) constraints on this element Element id Dosage.doseAndRate Short description Amount of medication administered Definition The amount of medication administered. Data type Element Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: TQ1-2
id		0..1	string	There are no (further) constraints on this element Element id Dosage.doseAndRate.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Dosage.doseAndRate.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a
type	Σ	0..1	CodeableConcept	There are no (further) constraints on this element Element id Dosage.doseAndRate.type Short description The kind of dose or rate specified Definition The kind of dose or rate specified, for example, ordered or calculated. Requirements If the type is not populated, assume to be "ordered". Data type CodeableConcept Binding The kind of dose or rate specified. DoseAndRateType (example) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: RXO-21; RXE-23
dose[x]	S Σ	0..1		Element id Dosage.doseAndRate.dose[x] Short description Amount of medication per dose Definition Hier kann die Dosierung einer Gabe bzw. Einnahme abgebildet werden. Dabei kann es sich um eine definierte Menge für eine Einnahme handeln (z.B. die Einnahme von 5 mg eines Wirkstoffs im Rahmen einer Einnahme) oder um einen definierten Mengenbereich (z.B. die Einnahme von 5 mg bis 10 mg eines Wirkstoffs im Rahmen einer Einnahme). Requirements The amount of therapeutic or other substance given at one administration event. Comments Note that this specifies the quantity of the specified medication, not the quantity for each active ingredient(s). Each ingredient amount can be communicated in the Medication resource. For example, if one wants to communicate that a tablet was 375 mg, where the dose was one tablet, you can use the Medication resource to document that the tablet was comprised of 375 mg of drug XYZ. Alternatively if the dose was 375 mg, then you may only need to use the Medication resource to indicate this was a tablet. If the example were an IV such as dopamine and you wanted to communicate that 400mg of dopamine was mixed in 500 ml of some IV solution, then this would all be communicated in the Medication resource. If the administration is not intended to be instantaneous (rate is present or timing has a duration), this can be specified to convey the total amount to be administered over the period of time as indicated by the schedule e.g. 500 ml in dose, with timing used to convey that this should be done over 4 hours. Sliced: Unordered, Open, by $this(Type) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: RXO-2, RXE-3 rim: .doseQuantity
doseQuantity	S Σ I	0..1	SimpleQuantityBinding	Element id Dosage.doseAndRate.dose[x]:doseQuantity Short description A fixed quantity (no comparator) Definition Hier wird die Dosiermenge mittels einer definierten Menge angegeben. Requirements The amount of therapeutic or other substance given at one administration event. Comments The context of use may frequently define what kind of quantity this is and therefore what kind of units can be used. The context of use may also restrict the values for the comparator. Data type SimpleQuantity Binding KBV_VS_SFHIR_BMP_DOSIEREINHEIT (preferred) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` qty-3: If a code for the unit is present, the system SHALL also be present `code.empty() or system.exists()` sqty-1: The comparator is not used on a SimpleQuantity `comparator.empty()` Mappings v2: RXO-2, RXE-3 rim: .doseQuantity rim: n/a v2: SN (see also Range) or CQ rim: PQ, IVL<PQ>, MO, CO, depending on the values
id		0..1	string	There are no (further) constraints on this element Element id Dosage.doseAndRate.dose[x]:doseQuantity.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Dosage.doseAndRate.dose[x]:doseQuantity.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a
value	S Σ	1..1	decimal	Element id Dosage.doseAndRate.dose[x]:doseQuantity.value Short description Numerical value (with implicit precision) Definition Hier wird die Menge des Arzneimittels angegeben, die verabreicht/eingenommen wird. Requirements Precision is handled implicitly in almost all cases of measurement. Comments The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books). Data type decimal Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: SN.2 / CQ - N/A rim: PQ.value, CO.value, MO.value, IVL.high or IVL.low depending on the value
comparator	Σ ?!	0..0	codeBinding	There are no (further) constraints on this element Element id Dosage.doseAndRate.dose[x]:doseQuantity.comparator Short description < \| <= \| >= \| > - how to understand the value Definition Not allowed to be used in this context Requirements Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology. Meaning when missing If there is no comparator, then there is no modification of the value Data type code Binding How the Quantity should be understood and represented. QuantityComparator (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: SN.1 / CQ.1 rim: IVL properties
unit	S Σ	1..1	string	There are no (further) constraints on this element Element id Dosage.doseAndRate.dose[x]:doseQuantity.unit Short description Unit representation Definition A human-readable form of the unit. Requirements There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: (see OBX.6 etc.) / CQ.2 rim: PQ.unit
system	S Σ I	1..1	uri	There are no (further) constraints on this element Element id Dosage.doseAndRate.dose[x]:doseQuantity.system Short description System that defines coded unit form Definition The identification of the system that provides the coded form of the unit. Requirements Need to know the system that defines the coded form of the unit. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: (see OBX.6 etc.) / CQ.2 rim: CO.codeSystem, PQ.translation.codeSystem
code	S Σ	1..1	code	Element id Dosage.doseAndRate.dose[x]:doseQuantity.code Short description Coded form of the unit Definition Hier wird die Dosiereinheit als Code angegeben. Hierbei sollte nach Möglichkeit folgendes ValueSet verwendet werden: https://fhir.kbv.de/ValueSet/KBV_VS_SFHIR_BMP_DOSIEREINHEIT. Requirements Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest. Comments The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system. Data type code Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: (see OBX.6 etc.) / CQ.2 rim: PQ.code, MO.currency, PQ.translation.code
doseRange	S Σ	0..1	Range	Element id Dosage.doseAndRate.dose[x]:doseRange Short description Amount of medication per dose Definition Hier wird die Dosiermenge mittels eines definierten Mengenbereichs angegeben. Requirements The amount of therapeutic or other substance given at one administration event. Comments Note that this specifies the quantity of the specified medication, not the quantity for each active ingredient(s). Each ingredient amount can be communicated in the Medication resource. For example, if one wants to communicate that a tablet was 375 mg, where the dose was one tablet, you can use the Medication resource to document that the tablet was comprised of 375 mg of drug XYZ. Alternatively if the dose was 375 mg, then you may only need to use the Medication resource to indicate this was a tablet. If the example were an IV such as dopamine and you wanted to communicate that 400mg of dopamine was mixed in 500 ml of some IV solution, then this would all be communicated in the Medication resource. If the administration is not intended to be instantaneous (rate is present or timing has a duration), this can be specified to convey the total amount to be administered over the period of time as indicated by the schedule e.g. 500 ml in dose, with timing used to convey that this should be done over 4 hours. Data type Range Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: RXO-2, RXE-3 rim: .doseQuantity
id		0..1	string	There are no (further) constraints on this element Element id Dosage.doseAndRate.dose[x]:doseRange.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Dosage.doseAndRate.dose[x]:doseRange.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a
low	S Σ	0..1	SimpleQuantityBinding	Element id Dosage.doseAndRate.dose[x]:doseRange.low Short description Low limit Definition Hier wird die untere Grenze des definierten Mengenbereichs angegeben. Comments If the low element is missing, the low boundary is not known. Data type SimpleQuantity Binding KBV_VS_SFHIR_BMP_DOSIEREINHEIT (preferred) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: NR.1 rim: ./low
id		0..1	string	There are no (further) constraints on this element Element id Dosage.doseAndRate.dose[x]:doseRange.low.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Dosage.doseAndRate.dose[x]:doseRange.low.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a
value	S Σ	1..1	decimal	Element id Dosage.doseAndRate.dose[x]:doseRange.low.value Short description Numerical value (with implicit precision) Definition Hier wird die Menge des Arzneimittels angegeben, die verabreicht/eingenommen wird. Requirements Precision is handled implicitly in almost all cases of measurement. Comments The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books). Data type decimal Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: SN.2 / CQ - N/A rim: PQ.value, CO.value, MO.value, IVL.high or IVL.low depending on the value
comparator	Σ ?!	0..0	codeBinding	There are no (further) constraints on this element Element id Dosage.doseAndRate.dose[x]:doseRange.low.comparator Short description < \| <= \| >= \| > - how to understand the value Definition Not allowed to be used in this context Requirements Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology. Meaning when missing If there is no comparator, then there is no modification of the value Data type code Binding How the Quantity should be understood and represented. QuantityComparator (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: SN.1 / CQ.1 rim: IVL properties
unit	S Σ	1..1	string	There are no (further) constraints on this element Element id Dosage.doseAndRate.dose[x]:doseRange.low.unit Short description Unit representation Definition A human-readable form of the unit. Requirements There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: (see OBX.6 etc.) / CQ.2 rim: PQ.unit
system	S Σ I	1..1	uri	There are no (further) constraints on this element Element id Dosage.doseAndRate.dose[x]:doseRange.low.system Short description System that defines coded unit form Definition The identification of the system that provides the coded form of the unit. Requirements Need to know the system that defines the coded form of the unit. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: (see OBX.6 etc.) / CQ.2 rim: CO.codeSystem, PQ.translation.codeSystem
code	S Σ	1..1	code	Element id Dosage.doseAndRate.dose[x]:doseRange.low.code Short description Coded form of the unit Definition Hier wird die Dosiereinheit als Code angegeben. Hierbei sollte nach Möglichkeit folgendes ValueSet verwendet werden: https://fhir.kbv.de/ValueSet/KBV_VS_SFHIR_BMP_DOSIEREINHEIT. Requirements Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest. Comments The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system. Data type code Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: (see OBX.6 etc.) / CQ.2 rim: PQ.code, MO.currency, PQ.translation.code
high	S Σ	0..1	SimpleQuantityBinding	Element id Dosage.doseAndRate.dose[x]:doseRange.high Short description High limit Definition Hier wird die obere Grenze des definierten Mengenbereichs angegeben. Comments If the high element is missing, the high boundary is not known. Data type SimpleQuantity Binding KBV_VS_SFHIR_BMP_DOSIEREINHEIT (preferred) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: NR.2 rim: ./high
id		0..1	string	There are no (further) constraints on this element Element id Dosage.doseAndRate.dose[x]:doseRange.high.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Dosage.doseAndRate.dose[x]:doseRange.high.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a
value	S Σ	1..1	decimal	Element id Dosage.doseAndRate.dose[x]:doseRange.high.value Short description Numerical value (with implicit precision) Definition Hier wird die Menge des Arzneimittels angegeben, die verabreicht/eingenommen wird. Requirements Precision is handled implicitly in almost all cases of measurement. Comments The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books). Data type decimal Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: SN.2 / CQ - N/A rim: PQ.value, CO.value, MO.value, IVL.high or IVL.low depending on the value
comparator	Σ ?!	0..0	codeBinding	There are no (further) constraints on this element Element id Dosage.doseAndRate.dose[x]:doseRange.high.comparator Short description < \| <= \| >= \| > - how to understand the value Definition Not allowed to be used in this context Requirements Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology. Meaning when missing If there is no comparator, then there is no modification of the value Data type code Binding How the Quantity should be understood and represented. QuantityComparator (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: SN.1 / CQ.1 rim: IVL properties
unit	S Σ	1..1	string	There are no (further) constraints on this element Element id Dosage.doseAndRate.dose[x]:doseRange.high.unit Short description Unit representation Definition A human-readable form of the unit. Requirements There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: (see OBX.6 etc.) / CQ.2 rim: PQ.unit
system	S Σ I	1..1	uri	There are no (further) constraints on this element Element id Dosage.doseAndRate.dose[x]:doseRange.high.system Short description System that defines coded unit form Definition The identification of the system that provides the coded form of the unit. Requirements Need to know the system that defines the coded form of the unit. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: (see OBX.6 etc.) / CQ.2 rim: CO.codeSystem, PQ.translation.codeSystem
code	S Σ	1..1	code	Element id Dosage.doseAndRate.dose[x]:doseRange.high.code Short description Coded form of the unit Definition Hier wird die Dosiereinheit als Code angegeben. Hierbei sollte nach Möglichkeit folgendes ValueSet verwendet werden: https://fhir.kbv.de/ValueSet/KBV_VS_SFHIR_BMP_DOSIEREINHEIT. Requirements Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest. Comments The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system. Data type code Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: (see OBX.6 etc.) / CQ.2 rim: PQ.code, MO.currency, PQ.translation.code
rate[x]	S Σ	0..1		Element id Dosage.doseAndRate.rate[x] Short description Amount of medication per unit of time Definition Hier kann die Dosierung einer Rate über einen bestimmten Zeitraum abgebildet werden. Ein Beispiel dafür wäre die Rate einer Infusionslösung. Dabei kann entweder eine konkrete Verabreichungsgeschwindigkeit (z.B. eine Infusionslösung, welche mit 50 ml/h oder 100 mg/h verabreicht wird) oder ein Bereich für eine Verabreichungsgeschwindigkeit definiert werden (z.B. die Gabe einer Infusionslösung, welche mit 100 ml/h bis 150 mg/h verabreicht wird). Requirements Identifies the speed with which the medication was or will be introduced into the patient. Typically the rate for an infusion e.g. 100 ml per 1 hour or 100 ml/hr. May also be expressed as a rate per unit of time e.g. 500 ml per 2 hours. Other examples: 200 mcg/min or 200 mcg/1 minute; 1 liter/8 hours. Sometimes, a rate can imply duration when expressed as total volume / duration (e.g. 500mL/2 hours implies a duration of 2 hours). However, when rate doesn't imply duration (e.g. 250mL/hour), then the timing.repeat.duration is needed to convey the infuse over time period. Comments It is possible to supply both a rate and a doseQuantity to provide full details about how the medication is to be administered and supplied. If the rate is intended to change over time, depending on local rules/regulations, each change should be captured as a new version of the MedicationRequest with an updated rate, or captured with a new MedicationRequest with the new rate. It is possible to specify a rate over time (for example, 100 ml/hour) using either the rateRatio and rateQuantity. The rateQuantity approach requires systems to have the capability to parse UCUM grammer where ml/hour is included rather than a specific ratio where the time is specified as the denominator. Where a rate such as 500ml over 2 hours is specified, the use of rateRatio may be more semantically correct than specifying using a rateQuantity of 250 mg/hour. Sliced: Unordered, Open, by $this(Type) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: RXE22, RXE23, RXE-24 rim: .rateQuantity
rateRange	S Σ	0..1	Range	Element id Dosage.doseAndRate.rate[x]:rateRange Short description Amount of medication per unit of time Definition Hier kann der Bereich für eine Rate/Verabreichungsgeschwindigkeit angegeben werden, mit welcher ein Arzneimittel verabreicht wird. Beispiel: Eine Infusionslösung kann mit einer Geschwindigkeit von 100 ml/h (Untergrenze) bis 120 ml/h (Obergrenze) verabreicht werden. Requirements Identifies the speed with which the medication was or will be introduced into the patient. Typically the rate for an infusion e.g. 100 ml per 1 hour or 100 ml/hr. May also be expressed as a rate per unit of time e.g. 500 ml per 2 hours. Other examples: 200 mcg/min or 200 mcg/1 minute; 1 liter/8 hours. Sometimes, a rate can imply duration when expressed as total volume / duration (e.g. 500mL/2 hours implies a duration of 2 hours). However, when rate doesn't imply duration (e.g. 250mL/hour), then the timing.repeat.duration is needed to convey the infuse over time period. Comments It is possible to supply both a rate and a doseQuantity to provide full details about how the medication is to be administered and supplied. If the rate is intended to change over time, depending on local rules/regulations, each change should be captured as a new version of the MedicationRequest with an updated rate, or captured with a new MedicationRequest with the new rate. It is possible to specify a rate over time (for example, 100 ml/hour) using either the rateRatio and rateQuantity. The rateQuantity approach requires systems to have the capability to parse UCUM grammer where ml/hour is included rather than a specific ratio where the time is specified as the denominator. Where a rate such as 500ml over 2 hours is specified, the use of rateRatio may be more semantically correct than specifying using a rateQuantity of 250 mg/hour. Data type Range Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: RXE22, RXE23, RXE-24 rim: .rateQuantity
id		0..1	string	There are no (further) constraints on this element Element id Dosage.doseAndRate.rate[x]:rateRange.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Dosage.doseAndRate.rate[x]:rateRange.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a
low	S Σ	0..1	SimpleQuantity	Element id Dosage.doseAndRate.rate[x]:rateRange.low Short description Low limit Definition Hier wird die untere Grenze des definierten Mengenbereichs angegeben. Comments If the low element is missing, the low boundary is not known. Data type SimpleQuantity Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: NR.1 rim: ./low
id		0..1	string	There are no (further) constraints on this element Element id Dosage.doseAndRate.rate[x]:rateRange.low.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Dosage.doseAndRate.rate[x]:rateRange.low.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a
value	S Σ	1..1	decimal	Element id Dosage.doseAndRate.rate[x]:rateRange.low.value Short description Numerical value (with implicit precision) Definition Hier wird die Menge angegeben, die über einen bestimmten Zeitraum verabreicht wird. Requirements Precision is handled implicitly in almost all cases of measurement. Comments The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books). Data type decimal Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: SN.2 / CQ - N/A rim: PQ.value, CO.value, MO.value, IVL.high or IVL.low depending on the value
comparator	Σ ?!	0..0	codeBinding	There are no (further) constraints on this element Element id Dosage.doseAndRate.rate[x]:rateRange.low.comparator Short description < \| <= \| >= \| > - how to understand the value Definition Not allowed to be used in this context Requirements Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology. Meaning when missing If there is no comparator, then there is no modification of the value Data type code Binding How the Quantity should be understood and represented. QuantityComparator (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: SN.1 / CQ.1 rim: IVL properties
unit	S Σ	1..1	string	There are no (further) constraints on this element Element id Dosage.doseAndRate.rate[x]:rateRange.low.unit Short description Unit representation Definition A human-readable form of the unit. Requirements There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: (see OBX.6 etc.) / CQ.2 rim: PQ.unit
system	S Σ I	1..1	uri	There are no (further) constraints on this element Element id Dosage.doseAndRate.rate[x]:rateRange.low.system Short description System that defines coded unit form Definition The identification of the system that provides the coded form of the unit. Requirements Need to know the system that defines the coded form of the unit. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: (see OBX.6 etc.) / CQ.2 rim: CO.codeSystem, PQ.translation.codeSystem
code	S Σ	1..1	code	Element id Dosage.doseAndRate.rate[x]:rateRange.low.code Short description Coded form of the unit Definition Hier wird die Einheit der Rate/Verabreichungsgeschwingigkeit als Code angegeben. Requirements Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest. Comments The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system. Data type code Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: (see OBX.6 etc.) / CQ.2 rim: PQ.code, MO.currency, PQ.translation.code
high	S Σ	0..1	SimpleQuantity	Element id Dosage.doseAndRate.rate[x]:rateRange.high Short description High limit Definition Hier wird die obere Grenze des definierten Mengenbereichs angegeben. Comments If the high element is missing, the high boundary is not known. Data type SimpleQuantity Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: NR.2 rim: ./high
id		0..1	string	There are no (further) constraints on this element Element id Dosage.doseAndRate.rate[x]:rateRange.high.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Dosage.doseAndRate.rate[x]:rateRange.high.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a
value	S Σ	1..1	decimal	Element id Dosage.doseAndRate.rate[x]:rateRange.high.value Short description Numerical value (with implicit precision) Definition Hier wird die Menge angegeben, die über einen bestimmten Zeitraum verabreicht wird. Requirements Precision is handled implicitly in almost all cases of measurement. Comments The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books). Data type decimal Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: SN.2 / CQ - N/A rim: PQ.value, CO.value, MO.value, IVL.high or IVL.low depending on the value
comparator	Σ ?!	0..0	codeBinding	There are no (further) constraints on this element Element id Dosage.doseAndRate.rate[x]:rateRange.high.comparator Short description < \| <= \| >= \| > - how to understand the value Definition Not allowed to be used in this context Requirements Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology. Meaning when missing If there is no comparator, then there is no modification of the value Data type code Binding How the Quantity should be understood and represented. QuantityComparator (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: SN.1 / CQ.1 rim: IVL properties
unit	S Σ	1..1	string	There are no (further) constraints on this element Element id Dosage.doseAndRate.rate[x]:rateRange.high.unit Short description Unit representation Definition A human-readable form of the unit. Requirements There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: (see OBX.6 etc.) / CQ.2 rim: PQ.unit
system	S Σ I	1..1	uri	There are no (further) constraints on this element Element id Dosage.doseAndRate.rate[x]:rateRange.high.system Short description System that defines coded unit form Definition The identification of the system that provides the coded form of the unit. Requirements Need to know the system that defines the coded form of the unit. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: (see OBX.6 etc.) / CQ.2 rim: CO.codeSystem, PQ.translation.codeSystem
code	S Σ	1..1	code	Element id Dosage.doseAndRate.rate[x]:rateRange.high.code Short description Coded form of the unit Definition Hier wird die Einheit der Rate/Verabreichungsgeschwingigkeit als Code angegeben. Requirements Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest. Comments The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system. Data type code Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: (see OBX.6 etc.) / CQ.2 rim: PQ.code, MO.currency, PQ.translation.code
rateQuantity	S Σ I	0..1	SimpleQuantity	Element id Dosage.doseAndRate.rate[x]:rateQuantity Short description A fixed quantity (no comparator) Definition Hier wird die Rate/Verabreichungsgeschwindigkeit in Form einer festen Angabe abgebildet. Dabei wird die Geschwindigkeit bzw. Flussrate, mit der das Arzneimittel verabreicht wird, mit Hilfe einer kombinierten Einheit abgebildet (z.B. ml/h). Beispiele für eine Flussrate mit einer kombinierten Einheit: 1 Milliliter pro Stunde (1 ml/h) 1 Milligramm pro Stunde (1 mg/h) Requirements Identifies the speed with which the medication was or will be introduced into the patient. Typically the rate for an infusion e.g. 100 ml per 1 hour or 100 ml/hr. May also be expressed as a rate per unit of time e.g. 500 ml per 2 hours. Other examples: 200 mcg/min or 200 mcg/1 minute; 1 liter/8 hours. Sometimes, a rate can imply duration when expressed as total volume / duration (e.g. 500mL/2 hours implies a duration of 2 hours). However, when rate doesn't imply duration (e.g. 250mL/hour), then the timing.repeat.duration is needed to convey the infuse over time period. Comments The context of use may frequently define what kind of quantity this is and therefore what kind of units can be used. The context of use may also restrict the values for the comparator. Data type SimpleQuantity Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` qty-3: If a code for the unit is present, the system SHALL also be present `code.empty() or system.exists()` sqty-1: The comparator is not used on a SimpleQuantity `comparator.empty()` Mappings v2: RXE22, RXE23, RXE-24 rim: .rateQuantity rim: n/a v2: SN (see also Range) or CQ rim: PQ, IVL<PQ>, MO, CO, depending on the values
id		0..1	string	There are no (further) constraints on this element Element id Dosage.doseAndRate.rate[x]:rateQuantity.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Dosage.doseAndRate.rate[x]:rateQuantity.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a
value	S Σ	1..1	decimal	Element id Dosage.doseAndRate.rate[x]:rateQuantity.value Short description Numerical value (with implicit precision) Definition Hier wird die Menge angegeben, die über einen bestimmten Zeitraum verabreicht wird. Requirements Precision is handled implicitly in almost all cases of measurement. Comments The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books). Data type decimal Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: SN.2 / CQ - N/A rim: PQ.value, CO.value, MO.value, IVL.high or IVL.low depending on the value
comparator	Σ ?!	0..0	codeBinding	There are no (further) constraints on this element Element id Dosage.doseAndRate.rate[x]:rateQuantity.comparator Short description < \| <= \| >= \| > - how to understand the value Definition Not allowed to be used in this context Requirements Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology. Meaning when missing If there is no comparator, then there is no modification of the value Data type code Binding How the Quantity should be understood and represented. QuantityComparator (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: SN.1 / CQ.1 rim: IVL properties
unit	S Σ	1..1	string	Element id Dosage.doseAndRate.rate[x]:rateQuantity.unit Short description Unit representation Definition Hier wird die Einheit der Rate/Verabreichungsgeschwingigkeit in menschenlesbarer Sprache angegeben. Requirements There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: (see OBX.6 etc.) / CQ.2 rim: PQ.unit
system	S Σ I	1..1	uri	There are no (further) constraints on this element Element id Dosage.doseAndRate.rate[x]:rateQuantity.system Short description System that defines coded unit form Definition The identification of the system that provides the coded form of the unit. Requirements Need to know the system that defines the coded form of the unit. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: (see OBX.6 etc.) / CQ.2 rim: CO.codeSystem, PQ.translation.codeSystem
code	S Σ	1..1	code	Element id Dosage.doseAndRate.rate[x]:rateQuantity.code Short description Coded form of the unit Definition Hier wird die Einheit der Rate/Verabreichungsgeschwingigkeit als Code angegeben. Requirements Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest. Comments The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system. Data type code Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: (see OBX.6 etc.) / CQ.2 rim: PQ.code, MO.currency, PQ.translation.code
rateRatio	S Σ	0..1	Ratio	Element id Dosage.doseAndRate.rate[x]:rateRatio Short description Amount of medication per unit of time Definition Hier wird die Rate/Verabreichungsgeschwindigkeit in Form einer festen Angabe abgebildet. Dabei wird die Geschwindigkeit bzw. Flussrate, mit der das Arzneimittel verabreicht wird, mit Hilfe einer Einheit abgebildet, in der Zähler (z.B. 1 ml) und Nenner (z.B. 1 h) einzeln abgebildet werden. Beispiele für eine Flussrate mit Angabe von Zähler und Nenner: 1 Mililiter pro 1 Stunde (1ml / 1h) 1 Milligramm pro 1 Stunde (1mg / 1h) Requirements Identifies the speed with which the medication was or will be introduced into the patient. Typically the rate for an infusion e.g. 100 ml per 1 hour or 100 ml/hr. May also be expressed as a rate per unit of time e.g. 500 ml per 2 hours. Other examples: 200 mcg/min or 200 mcg/1 minute; 1 liter/8 hours. Sometimes, a rate can imply duration when expressed as total volume / duration (e.g. 500mL/2 hours implies a duration of 2 hours). However, when rate doesn't imply duration (e.g. 250mL/hour), then the timing.repeat.duration is needed to convey the infuse over time period. Comments It is possible to supply both a rate and a doseQuantity to provide full details about how the medication is to be administered and supplied. If the rate is intended to change over time, depending on local rules/regulations, each change should be captured as a new version of the MedicationRequest with an updated rate, or captured with a new MedicationRequest with the new rate. It is possible to specify a rate over time (for example, 100 ml/hour) using either the rateRatio and rateQuantity. The rateQuantity approach requires systems to have the capability to parse UCUM grammer where ml/hour is included rather than a specific ratio where the time is specified as the denominator. Where a rate such as 500ml over 2 hours is specified, the use of rateRatio may be more semantically correct than specifying using a rateQuantity of 250 mg/hour. Data type Ratio Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: RXE22, RXE23, RXE-24 rim: .rateQuantity
id		0..1	string	There are no (further) constraints on this element Element id Dosage.doseAndRate.rate[x]:rateRatio.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Dosage.doseAndRate.rate[x]:rateRatio.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a
numerator	S Σ	1..1	QuantityBinding	Element id Dosage.doseAndRate.rate[x]:rateRatio.numerator Short description Numerator value Definition Hier wird der Zähler einer Verabreichungsgeschwindigkeit bzw. Flussrate angegeben. Dieser besteht aus einem Wert und einer Einheit (bevorzugt eine Volumeneinheit oder eine Gewichtseinheit). Beispiele für den Zähler einer Verabreichungsgeschwindigkeit: 10 Milliliter (10 ml) 5 Milligramm (5 mg) Data type Quantity Binding KBV_VS_SFHIR_BMP_DOSIEREINHEIT (preferred) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: .numerator
id		0..1	string	There are no (further) constraints on this element Element id Dosage.doseAndRate.rate[x]:rateRatio.numerator.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Dosage.doseAndRate.rate[x]:rateRatio.numerator.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a
value	S Σ	1..1	decimal	Element id Dosage.doseAndRate.rate[x]:rateRatio.numerator.value Short description Numerical value (with implicit precision) Definition Hier wird die Menge angegeben, die über einen bestimmten Zeitraum verabreicht wird. Requirements Precision is handled implicitly in almost all cases of measurement. Comments The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books). Data type decimal Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: SN.2 / CQ - N/A rim: PQ.value, CO.value, MO.value, IVL.high or IVL.low depending on the value
comparator	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element id Dosage.doseAndRate.rate[x]:rateRatio.numerator.comparator Short description < \| <= \| >= \| > - how to understand the value Definition How the value should be understood and represented - whether the actual value is greater or less than the stated value due to measurement issues; e.g. if the comparator is "<" , then the real value is < stated value. Requirements Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology. Meaning when missing If there is no comparator, then there is no modification of the value Data type code Binding How the Quantity should be understood and represented. QuantityComparator (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: SN.1 / CQ.1 rim: IVL properties
unit	S Σ	1..1	string	There are no (further) constraints on this element Element id Dosage.doseAndRate.rate[x]:rateRatio.numerator.unit Short description Unit representation Definition A human-readable form of the unit. Requirements There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: (see OBX.6 etc.) / CQ.2 rim: PQ.unit
system	S Σ I	1..1	uri	There are no (further) constraints on this element Element id Dosage.doseAndRate.rate[x]:rateRatio.numerator.system Short description System that defines coded unit form Definition The identification of the system that provides the coded form of the unit. Requirements Need to know the system that defines the coded form of the unit. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: (see OBX.6 etc.) / CQ.2 rim: CO.codeSystem, PQ.translation.codeSystem
code	S Σ	1..1	code	Element id Dosage.doseAndRate.rate[x]:rateRatio.numerator.code Short description Coded form of the unit Definition Hier wird die Dosiereinheit als Code angegeben. Hierbei sollte nach Möglichkeit folgendes ValueSet verwendet werden: https://fhir.kbv.de/ValueSet/KBV_VS_SFHIR_BMP_DOSIEREINHEIT. Requirements Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest. Comments The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system. Data type code Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: (see OBX.6 etc.) / CQ.2 rim: PQ.code, MO.currency, PQ.translation.code
denominator	S Σ	1..1	QuantityBinding	Element id Dosage.doseAndRate.rate[x]:rateRatio.denominator Short description Denominator value Definition Hier wird der Nenner einer Verabreichungsgeschwindigkeit bzw. Flussrate angegeben. Dieser entspricht einer Zeitspanne. Beispiele für den Nenner einer Verabreichungsgeschwindigkeit: 3 Stunden (3h) 1 Tag (1d) Data type Quantity Binding UnitsOfTime (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: .denominator
id		0..1	string	There are no (further) constraints on this element Element id Dosage.doseAndRate.rate[x]:rateRatio.denominator.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Dosage.doseAndRate.rate[x]:rateRatio.denominator.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a
value	S Σ	1..1	decimal	Element id Dosage.doseAndRate.rate[x]:rateRatio.denominator.value Short description Numerical value (with implicit precision) Definition Hier wird die Menge angegeben, die über einen bestimmten Zeitraum verabreicht wird. Requirements Precision is handled implicitly in almost all cases of measurement. Comments The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books). Data type decimal Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: SN.2 / CQ - N/A rim: PQ.value, CO.value, MO.value, IVL.high or IVL.low depending on the value
comparator	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element id Dosage.doseAndRate.rate[x]:rateRatio.denominator.comparator Short description < \| <= \| >= \| > - how to understand the value Definition How the value should be understood and represented - whether the actual value is greater or less than the stated value due to measurement issues; e.g. if the comparator is "<" , then the real value is < stated value. Requirements Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology. Meaning when missing If there is no comparator, then there is no modification of the value Data type code Binding How the Quantity should be understood and represented. QuantityComparator (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: SN.1 / CQ.1 rim: IVL properties
unit	S Σ	1..1	string	There are no (further) constraints on this element Element id Dosage.doseAndRate.rate[x]:rateRatio.denominator.unit Short description Unit representation Definition A human-readable form of the unit. Requirements There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: (see OBX.6 etc.) / CQ.2 rim: PQ.unit
system	S Σ I	1..1	uri	There are no (further) constraints on this element Element id Dosage.doseAndRate.rate[x]:rateRatio.denominator.system Short description System that defines coded unit form Definition The identification of the system that provides the coded form of the unit. Requirements Need to know the system that defines the coded form of the unit. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: (see OBX.6 etc.) / CQ.2 rim: CO.codeSystem, PQ.translation.codeSystem
code	S Σ	1..1	code	Element id Dosage.doseAndRate.rate[x]:rateRatio.denominator.code Short description Coded form of the unit Definition Hier wird die Dosiereinheit als Code angegeben. Hierbei sollte nach Möglichkeit folgendes ValueSet verwendet werden: https://fhir.kbv.de/ValueSet/KBV_VS_SFHIR_BMP_DOSIEREINHEIT. Requirements Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest. Comments The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system. Data type code Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: (see OBX.6 etc.) / CQ.2 rim: PQ.code, MO.currency, PQ.translation.code
maxDosePerPeriod	S Σ	0..1	Ratio	Element id Dosage.maxDosePerPeriod Short description Upper limit on medication per unit of time Definition Hier wird die maximale Dosis angegeben, die in einer bestimmten Zeitspanne verabreicht werden darf. Bei kombinierten Dauer- und Bedarfsmedikationen ("zusätzlich bei Bedarf") wird über dieses Element die maximale Gesamtdosis der Einnahme/Verabreichung von Arzneimitteln mit gleichem Wirkstoff oder aus der gleichen Wirkstoffgruppe abgebildet. Requirements The maximum total quantity of a therapeutic substance that may be administered to a subject over the period of time. For example, 1000mg in 24 hours. Comments This is intended for use as an adjunct to the dosage when there is an upper cap. For example "2 tablets every 4 hours to a maximum of 8/day". Data type Ratio Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: RXO-23, RXE-19 rim: .maxDoseQuantity
id		0..1	string	There are no (further) constraints on this element Element id Dosage.maxDosePerPeriod.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Dosage.maxDosePerPeriod.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a
numerator	S Σ	1..1	QuantityBinding	Element id Dosage.maxDosePerPeriod.numerator Short description Numerator value Definition Hier wird die Menge abgebildet. Dieser Wert entspricht dem Wert im Zähler der Angabe "Maximale Menge pro Gabe". Data type Quantity Binding KBV_VS_SFHIR_BMP_DOSIEREINHEIT (preferred) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: .numerator
id		0..1	string	There are no (further) constraints on this element Element id Dosage.maxDosePerPeriod.numerator.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Dosage.maxDosePerPeriod.numerator.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a
value	S Σ	1..1	decimal	Element id Dosage.maxDosePerPeriod.numerator.value Short description Numerical value (with implicit precision) Definition Hier wird die Menge des Arzneimittels angegeben, die maximal innerhalb der Zeitspanne verabreicht/eingenommen werden darf. Requirements Precision is handled implicitly in almost all cases of measurement. Comments The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books). Data type decimal Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: SN.2 / CQ - N/A rim: PQ.value, CO.value, MO.value, IVL.high or IVL.low depending on the value
comparator	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element id Dosage.maxDosePerPeriod.numerator.comparator Short description < \| <= \| >= \| > - how to understand the value Definition How the value should be understood and represented - whether the actual value is greater or less than the stated value due to measurement issues; e.g. if the comparator is "<" , then the real value is < stated value. Requirements Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology. Meaning when missing If there is no comparator, then there is no modification of the value Data type code Binding How the Quantity should be understood and represented. QuantityComparator (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: SN.1 / CQ.1 rim: IVL properties
unit	S Σ	1..1	string	There are no (further) constraints on this element Element id Dosage.maxDosePerPeriod.numerator.unit Short description Unit representation Definition A human-readable form of the unit. Requirements There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: (see OBX.6 etc.) / CQ.2 rim: PQ.unit
system	S Σ I	1..1	uri	There are no (further) constraints on this element Element id Dosage.maxDosePerPeriod.numerator.system Short description System that defines coded unit form Definition The identification of the system that provides the coded form of the unit. Requirements Need to know the system that defines the coded form of the unit. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: (see OBX.6 etc.) / CQ.2 rim: CO.codeSystem, PQ.translation.codeSystem
code	S Σ	1..1	code	Element id Dosage.maxDosePerPeriod.numerator.code Short description Coded form of the unit Definition Hier wird die Dosiereinheit als Code angegeben. Hierbei sollte nach Möglichkeit folgendes ValueSet verwendet werden: https://fhir.kbv.de/ValueSet/KBV_VS_SFHIR_BMP_DOSIEREINHEIT. Requirements Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest. Comments The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system. Data type code Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: (see OBX.6 etc.) / CQ.2 rim: PQ.code, MO.currency, PQ.translation.code
denominator	S Σ	1..1	QuantityBinding	Element id Dosage.maxDosePerPeriod.denominator Short description Denominator value Definition Hier wird die Zeitspanne angegeben. Dieser Wert entspricht dem Wert im Nenner der Angabe "Maximale Menge pro Gabe". Data type Quantity Binding UnitsOfTime (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: .denominator
id		0..1	string	There are no (further) constraints on this element Element id Dosage.maxDosePerPeriod.denominator.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Dosage.maxDosePerPeriod.denominator.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a
value	S Σ	1..1	decimal	Element id Dosage.maxDosePerPeriod.denominator.value Short description Numerical value (with implicit precision) Definition Hier wird der Wert der Zeitspanne angegeben, innerhalb der die definierte Menge des Arzneimittels maximal verabreicht/eingenommen werden darf. Requirements Precision is handled implicitly in almost all cases of measurement. Comments The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books). Data type decimal Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: SN.2 / CQ - N/A rim: PQ.value, CO.value, MO.value, IVL.high or IVL.low depending on the value
comparator	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element id Dosage.maxDosePerPeriod.denominator.comparator Short description < \| <= \| >= \| > - how to understand the value Definition How the value should be understood and represented - whether the actual value is greater or less than the stated value due to measurement issues; e.g. if the comparator is "<" , then the real value is < stated value. Requirements Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology. Meaning when missing If there is no comparator, then there is no modification of the value Data type code Binding How the Quantity should be understood and represented. QuantityComparator (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: SN.1 / CQ.1 rim: IVL properties
unit	S Σ	1..1	string	There are no (further) constraints on this element Element id Dosage.maxDosePerPeriod.denominator.unit Short description Unit representation Definition A human-readable form of the unit. Requirements There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: (see OBX.6 etc.) / CQ.2 rim: PQ.unit
system	S Σ I	1..1	uri	There are no (further) constraints on this element Element id Dosage.maxDosePerPeriod.denominator.system Short description System that defines coded unit form Definition The identification of the system that provides the coded form of the unit. Requirements Need to know the system that defines the coded form of the unit. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: (see OBX.6 etc.) / CQ.2 rim: CO.codeSystem, PQ.translation.codeSystem
code	S Σ	1..1	code	Element id Dosage.maxDosePerPeriod.denominator.code Short description Coded form of the unit Definition Hier wird die Zeiteinheit als Code angegeben. Requirements Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest. Comments The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system. Data type code Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: (see OBX.6 etc.) / CQ.2 rim: PQ.code, MO.currency, PQ.translation.code
maxDosePerAdministration	S Σ	0..1	SimpleQuantityBinding	Element id Dosage.maxDosePerAdministration Short description Upper limit on medication per administration Definition Hier wird die Dosiermenge mittels einer maximalen Menge angegeben. Requirements The maximum total quantity of a therapeutic substance that may be administered to a subject per administration. Comments This is intended for use as an adjunct to the dosage when there is an upper cap. For example, a body surface area related dose with a maximum amount, such as 1.5 mg/m2 (maximum 2 mg) IV over 5 – 10 minutes would have doseQuantity of 1.5 mg/m2 and maxDosePerAdministration of 2 mg. Data type SimpleQuantity Binding KBV_VS_SFHIR_BMP_DOSIEREINHEIT (preferred) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: not supported
id		0..1	string	There are no (further) constraints on this element Element id Dosage.maxDosePerAdministration.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Dosage.maxDosePerAdministration.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a
value	S Σ	1..1	decimal	Element id Dosage.maxDosePerAdministration.value Short description Numerical value (with implicit precision) Definition Hier wird die Menge des Arzneimittels angegeben, die verabreicht/eingenommen wird. Requirements Precision is handled implicitly in almost all cases of measurement. Comments The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books). Data type decimal Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: SN.2 / CQ - N/A rim: PQ.value, CO.value, MO.value, IVL.high or IVL.low depending on the value
comparator	Σ ?!	0..0	codeBinding	There are no (further) constraints on this element Element id Dosage.maxDosePerAdministration.comparator Short description < \| <= \| >= \| > - how to understand the value Definition Not allowed to be used in this context Requirements Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology. Meaning when missing If there is no comparator, then there is no modification of the value Data type code Binding How the Quantity should be understood and represented. QuantityComparator (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: SN.1 / CQ.1 rim: IVL properties
unit	S Σ	1..1	string	There are no (further) constraints on this element Element id Dosage.maxDosePerAdministration.unit Short description Unit representation Definition A human-readable form of the unit. Requirements There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: (see OBX.6 etc.) / CQ.2 rim: PQ.unit
system	S Σ I	1..1	uri	There are no (further) constraints on this element Element id Dosage.maxDosePerAdministration.system Short description System that defines coded unit form Definition The identification of the system that provides the coded form of the unit. Requirements Need to know the system that defines the coded form of the unit. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: (see OBX.6 etc.) / CQ.2 rim: CO.codeSystem, PQ.translation.codeSystem
code	S Σ	1..1	code	Element id Dosage.maxDosePerAdministration.code Short description Coded form of the unit Definition Hier wird die Dosiereinheit als Code angegeben. Hierbei sollte nach Möglichkeit folgendes ValueSet verwendet werden: https://fhir.kbv.de/ValueSet/KBV_VS_SFHIR_BMP_DOSIEREINHEIT. Requirements Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest. Comments The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system. Data type code Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: (see OBX.6 etc.) / CQ.2 rim: PQ.code, MO.currency, PQ.translation.code
maxDosePerLifetime	Σ	0..1	SimpleQuantity	There are no (further) constraints on this element Element id Dosage.maxDosePerLifetime Short description Upper limit on medication per lifetime of the patient Definition Upper limit on medication per lifetime of the patient. Requirements The maximum total quantity of a therapeutic substance that may be administered per lifetime of the subject. Data type SimpleQuantity Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: not supported

Documentation:

https://simplifier.net/epa-medication-v3-1/epadosage

Last updated on 8/14/2024, 12:50:58 PM

Confirmation

EPA Dosage

About

Information

Follow us

Links