<status value="active" /> <experimental value="false" /> <date value="2024-08-14" /> <publisher value="mio42 GmbH" /> <description value="Hier werden Informationen zur Dosierung angegeben." /> <fhirVersion value="4.0.1" /> <kind value="complex-type" /> <abstract value="false" /> <type value="Dosage" /> <baseDefinition value="http://hl7.org/fhir/StructureDefinition/Dosage" /> <derivation value="constraint" /> <snapshot> <element id="Dosage"> <path value="Dosage" /> <short value="How the medication is/was taken or should be taken" /> <definition value="Indicates how the medication is/was taken or should be taken by the patient." /> <min value="0" /> <max value="*" /> <base> <path value="Dosage" /> <min value="0" /> <max value="*" /> </base> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value=".outboundRelationship[typeCode=COMP].target[classCode=SBADM, moodCode=INT]" /> </mapping> </element> <element id="Dosage.id"> <path value="Dosage.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Dosage.extension"> <path value="Dosage.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Dosage.modifierExtension"> <path value="Dosage.modifierExtension" /> <short value="Extensions that cannot be ignored even if unrecognized" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself)." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <requirements value="Modifier extensions allow for extensions that *cannot* be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the [definition of modifier extensions](extensibility.html#modifierExtension)." /> <alias value="extensions" /> <alias value="user content" /> <alias value="modifiers" /> <min value="0" /> <max value="*" /> <base> <path value="BackboneElement.modifierExtension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <isModifier value="true" /> <isModifierReason value="Modifier extensions are expected to modify the meaning or interpretation of the element that contains them" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Dosage.sequence"> <path value="Dosage.sequence" /> <short value="The order of the dosage instructions" /> <definition value="Indicates the order in which the dosage instructions should be applied or interpreted." /> <comment value="32 bit number; for values larger than this, use decimal" /> <requirements value="If the sequence number of multiple Dosages is the same, then it is implied that the instructions are to be treated as concurrent. If the sequence number is different, then the Dosages are intended to be sequential." /> <min value="0" /> <max value="1" /> <base> <path value="Dosage.sequence" /> <min value="0" /> <max value="1" /> </base> <type> <code value="integer" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="TQ1-1" /> </mapping> <mapping> <identity value="rim" /> <map value=".text" /> </mapping> </element> <element id="Dosage.text"> <path value="Dosage.text" /> <short value="Free text dosage instructions e.g. SIG" /> <definition value="Hier kann die Dosieranweisung in Form eines Freitextes abgebildet werden." /> <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" /> <requirements value="Free text dosage instructions can be used for cases where the instructions are too complex to code. The content of this attribute does not include the name or description of the medication. When coded instructions are present, the free text instructions may still be present for display to humans taking or administering the medication. It is expected that the text instructions will always be populated. If the dosage.timing attribute is also populated, then the dosage.text should reflect the same information as the timing. Additional information about administration or preparation of the medication should be included as text." /> <min value="0" /> <max value="1" /> <base> <path value="Dosage.text" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="RXO-6; RXE-21" /> </mapping> <mapping> <identity value="rim" /> <map value=".text" /> </mapping> </element> <element id="Dosage.additionalInstruction"> <path value="Dosage.additionalInstruction" /> <short value="Supplemental instruction or warnings to the patient - e.g. "with meals", "may cause drowsiness"" /> <definition value="Hier wird eine ergänzende Anweisung anhand eines entsprechenden Codes oder alternativ mit einem Freitext angegeben." /> <comment value="Information about administration or preparation of the medication (e.g. "infuse as rapidly as possibly via intraperitoneal port" or "immediately following drug x") should be populated in dosage.text." /> <requirements value="Additional instruction is intended to be coded, but where no code exists, the element could include text. For example, "Swallow with plenty of water" which might or might not be coded." /> <min value="0" /> <max value="*" /> <base> <path value="Dosage.additionalInstruction" /> <min value="0" /> <max value="*" /> </base> <type> <code value="CodeableConcept" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="AdditionalInstruction" /> </extension> <strength value="example" /> <description value="A coded concept identifying additional instructions such as "take with water" or "avoid operating heavy machinery"." /> <valueSet value="http://hl7.org/fhir/ValueSet/additional-instruction-codes" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CE/CNE/CWE" /> </mapping> <mapping> <identity value="rim" /> <map value="CD" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:CodeableConcept rdfs:subClassOf dt:CD" /> </mapping> <mapping> <identity value="v2" /> <map value="RXO-7" /> </mapping> <mapping> <identity value="rim" /> <map value=".text" /> </mapping> </element> <element id="Dosage.additionalInstruction.id"> <path value="Dosage.additionalInstruction.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Dosage.additionalInstruction.extension"> <path value="Dosage.additionalInstruction.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Dosage.additionalInstruction.coding"> <path value="Dosage.additionalInstruction.coding" /> <slicing> <discriminator> <type value="pattern" /> <path value="$this" /> </discriminator> <rules value="open" /> </slicing> <short value="Code defined by a terminology system" /> <definition value="Hier werden Codes angegeben." /> <comment value="Das MustSupport gilt nur für die vordefinierten Slices." /> <requirements value="Allows for alternative encodings within a code system, and translations to other code systems." /> <min value="0" /> <max value="*" /> <base> <path value="CodeableConcept.coding" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Coding" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CE/CNE/CWE subset one of the sets of component 1-3 or 4-6" /> </mapping> <mapping> <identity value="rim" /> <map value="CV" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:Coding rdfs:subClassOf dt:CDCoding" /> </mapping> <mapping> <identity value="v2" /> <map value="C*E.1-8, C*E.10-22" /> </mapping> <mapping> <identity value="rim" /> <map value="union(., ./translation)" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding" /> </mapping> </element> <element id="Dosage.additionalInstruction.coding:snomed"> <path value="Dosage.additionalInstruction.coding" /> <sliceName value="snomed" /> <short value="Code defined by a terminology system" /> <definition value="A reference to a code defined by a terminology system." /> <comment value="Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true." /> <requirements value="Allows for alternative encodings within a code system, and translations to other code systems." /> <min value="0" /> <max value="1" /> <base> <path value="CodeableConcept.coding" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Coding" /> </type> <patternCoding> <system value="http://snomed.info/sct" /> </patternCoding> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <binding> <strength value="extensible" /> <valueSet value="https://gematik.de/fhir/terminology/ValueSet/epa-additional-dosage-instructions-snomed-ct-vs" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CE/CNE/CWE subset one of the sets of component 1-3 or 4-6" /> </mapping> <mapping> <identity value="rim" /> <map value="CV" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:Coding rdfs:subClassOf dt:CDCoding" /> </mapping> <mapping> <identity value="v2" /> <map value="C*E.1-8, C*E.10-22" /> </mapping> <mapping> <identity value="rim" /> <map value="union(., ./translation)" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding" /> </mapping> </element> <element id="Dosage.additionalInstruction.coding:snomed.id"> <path value="Dosage.additionalInstruction.coding.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Dosage.additionalInstruction.coding:snomed.extension"> <path value="Dosage.additionalInstruction.coding.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Dosage.additionalInstruction.coding:snomed.system"> <path value="Dosage.additionalInstruction.coding.system" /> <short value="Identity of the terminology system" /> <definition value="The identification of the code system that defines the meaning of the symbol in the code." /> <comment value="The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously." /> <requirements value="Need to be unambiguous about the source of the definition of the symbol." /> <min value="1" /> <max value="1" /> <base> <path value="Coding.system" /> <min value="0" /> <max value="1" /> </base> <type> <code value="uri" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="C*E.3" /> </mapping> <mapping> <identity value="rim" /> <map value="./codeSystem" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem" /> </mapping> </element> <element id="Dosage.additionalInstruction.coding:snomed.version"> <path value="Dosage.additionalInstruction.coding.version" /> <short value="Version of the system - if relevant" /> <definition value="The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged." /> <comment value="Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date." /> <min value="1" /> <max value="1" /> <base> <path value="Coding.version" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="C*E.7" /> </mapping> <mapping> <identity value="rim" /> <map value="./codeSystemVersion" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion" /> </mapping> </element> <element id="Dosage.additionalInstruction.coding:snomed.code"> <path value="Dosage.additionalInstruction.coding.code" /> <short value="Symbol in syntax defined by the system" /> <definition value="A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination)." /> <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" /> <requirements value="Need to refer to a particular code in the system." /> <min value="1" /> <max value="1" /> <base> <path value="Coding.code" /> <min value="0" /> <max value="1" /> </base> <type> <code value="code" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="C*E.1" /> </mapping> <mapping> <identity value="rim" /> <map value="./code" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code" /> </mapping> </element> <element id="Dosage.additionalInstruction.coding:snomed.display"> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable"> <valueBoolean value="true" /> </extension> <path value="Dosage.additionalInstruction.coding.display" /> <short value="Representation defined by the system" /> <definition value="A representation of the meaning of the code in the system, following the rules of the system." /> <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" /> <requirements value="Need to be able to carry a human-readable meaning of the code for readers that do not know the system." /> <min value="1" /> <max value="1" /> <base> <path value="Coding.display" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="C*E.2 - but note this is not well followed" /> </mapping> <mapping> <identity value="rim" /> <map value="CV.displayName" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName" /> </mapping> </element> <element id="Dosage.additionalInstruction.coding:snomed.userSelected"> <path value="Dosage.additionalInstruction.coding.userSelected" /> <short value="If this coding was chosen directly by the user" /> <definition value="Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays)." /> <comment value="Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely." /> <requirements value="This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing." /> <min value="0" /> <max value="1" /> <base> <path value="Coding.userSelected" /> <min value="0" /> <max value="1" /> </base> <type> <code value="boolean" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="Sometimes implied by being first" /> </mapping> <mapping> <identity value="rim" /> <map value="CD.codingRationale" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]" /> </mapping> </element> <element id="Dosage.additionalInstruction.text"> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable"> <valueBoolean value="true" /> </extension> <path value="Dosage.additionalInstruction.text" /> <short value="Plain text representation of the concept" /> <definition value="Hier wird ein Freitext eingetragen." /> <comment value="Very often the text is the same as a displayName of one of the codings." /> <requirements value="The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source." /> <min value="0" /> <max value="1" /> <base> <path value="CodeableConcept.text" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="C*E.9. But note many systems use C*E.2 for this" /> </mapping> <mapping> <identity value="rim" /> <map value="./originalText[mediaType/code="text/plain"]/data" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText" /> </mapping> </element> <element id="Dosage.patientInstruction"> <path value="Dosage.patientInstruction" /> <short value="Patient or consumer oriented instructions" /> <definition value="Hier können Hinweise zu Anwendung, Lagerung, Einnahme, etc. bzw. eine Gebrauchsanweisung in patientenverständlicher Sprache abgebildet werden." /> <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" /> <min value="0" /> <max value="1" /> <base> <path value="Dosage.patientInstruction" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="RXO-7" /> </mapping> <mapping> <identity value="rim" /> <map value=".text" /> </mapping> </element> <element id="Dosage.timing"> <path value="Dosage.timing" /> <short value="When medication should be administered" /> <definition value="When medication should be administered." /> <comment value="This attribute might not always be populated while the Dosage.text is expected to be populated. If both are populated, then the Dosage.text should reflect the content of the Dosage.timing." /> <requirements value="The timing schedule for giving the medication to the patient. This data type allows many different expressions. For example: "Every 8 hours"; "Three times a day"; "1/2 an hour before breakfast for 10 days from 23-Dec 2011:"; "15 Oct 2013, 17 Oct 2013 and 1 Nov 2013". Sometimes, a rate can imply duration when expressed as total volume / duration (e.g. 500mL/2 hours implies a duration of 2 hours). However, when rate doesn't imply duration (e.g. 250mL/hour), then the timing.repeat.duration is needed to convey the infuse over time period." /> <min value="0" /> <max value="1" /> <base> <path value="Dosage.timing" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Timing" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="N/A" /> </mapping> <mapping> <identity value="rim" /> <map value="QSET<TS> (GTS)" /> </mapping> <mapping> <identity value="rim" /> <map value=".effectiveTime" /> </mapping> </element> <element id="Dosage.timing.id"> <path value="Dosage.timing.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Dosage.timing.extension"> <path value="Dosage.timing.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Dosage.timing.modifierExtension"> <path value="Dosage.timing.modifierExtension" /> <short value="Extensions that cannot be ignored even if unrecognized" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself)." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <requirements value="Modifier extensions allow for extensions that *cannot* be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the [definition of modifier extensions](extensibility.html#modifierExtension)." /> <alias value="extensions" /> <alias value="user content" /> <alias value="modifiers" /> <min value="0" /> <max value="*" /> <base> <path value="BackboneElement.modifierExtension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <isModifier value="true" /> <isModifierReason value="Modifier extensions are expected to modify the meaning or interpretation of the element that contains them" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Dosage.timing.event"> <path value="Dosage.timing.event" /> <short value="When the event occurs" /> <definition value="Hier kann ein Zeitpunkt einer Verabreichung/Einnahme abgebildet werden." /> <requirements value="In a Medication Administration Record, for instance, you need to take a general specification, and turn it into a precise specification." /> <min value="0" /> <max value="*" /> <base> <path value="Timing.event" /> <min value="0" /> <max value="*" /> </base> <type> <code value="dateTime" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="QLIST<TS>" /> </mapping> </element> <element id="Dosage.timing.repeat"> <path value="Dosage.timing.repeat" /> <short value="When the event is to occur" /> <definition value="Hier kann angegeben werden, über welche Zeitspanne eine einzelne Verabreichung/Einnahme durchgeführt wird. Dabei müssen stets Wert und Einheit der Zeitspanne angegeben werden. Optional kann zusätzlich zu einer Zeitspanne eine maximale Zeitspanne für eine einzelne Verabreichung/Einnahme angegeben werden. **Beispiel:** * Die Dosierung der einzelnen Verabreichung/Einnahme eines Arzneimittels erfolgt über die Zeitspanne von 1 Stunde (1h)." /> <requirements value="Many timing schedules are determined by regular repetitions." /> <min value="0" /> <max value="1" /> <base> <path value="Timing.repeat" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Element" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="tim-9" /> <severity value="error" /> <human value="If there's an offset, there must be a when (and not C, CM, CD, CV)" /> <expression value="offset.empty() or (when.exists() and ((when in ('C' | 'CM' | 'CD' | 'CV')).not()))" /> <xpath value="not(exists(f:offset)) or exists(f:when)" /> <source value="http://hl7.org/fhir/StructureDefinition/Timing" /> </constraint> <constraint> <key value="tim-5" /> <severity value="error" /> <human value="period SHALL be a non-negative value" /> <expression value="period.exists() implies period >= 0" /> <xpath value="f:period/@value >= 0 or not(f:period/@value)" /> <source value="http://hl7.org/fhir/StructureDefinition/Timing" /> </constraint> <constraint> <key value="tim-6" /> <severity value="error" /> <human value="If there's a periodMax, there must be a period" /> <expression value="periodMax.empty() or period.exists()" /> <xpath value="not(exists(f:periodMax)) or exists(f:period)" /> <source value="http://hl7.org/fhir/StructureDefinition/Timing" /> </constraint> <constraint> <key value="tim-7" /> <severity value="error" /> <human value="If there's a durationMax, there must be a duration" /> <expression value="durationMax.empty() or duration.exists()" /> <xpath value="not(exists(f:durationMax)) or exists(f:duration)" /> <source value="http://hl7.org/fhir/StructureDefinition/Timing" /> </constraint> <constraint> <key value="tim-8" /> <severity value="error" /> <human value="If there's a countMax, there must be a count" /> <expression value="countMax.empty() or count.exists()" /> <xpath value="not(exists(f:countMax)) or exists(f:count)" /> <source value="http://hl7.org/fhir/StructureDefinition/Timing" /> </constraint> <constraint> <key value="tim-1" /> <severity value="error" /> <human value="if there's a duration, there needs to be duration units" /> <expression value="duration.empty() or durationUnit.exists()" /> <xpath value="not(exists(f:duration)) or exists(f:durationUnit)" /> <source value="http://hl7.org/fhir/StructureDefinition/Timing" /> </constraint> <constraint> <key value="tim-10" /> <severity value="error" /> <human value="If there's a timeOfDay, there cannot be a when, or vice versa" /> <expression value="timeOfDay.empty() or when.empty()" /> <xpath value="not(exists(f:timeOfDay)) or not(exists(f:when))" /> <source value="http://hl7.org/fhir/StructureDefinition/Timing" /> </constraint> <constraint> <key value="tim-2" /> <severity value="error" /> <human value="if there's a period, there needs to be period units" /> <expression value="period.empty() or periodUnit.exists()" /> <xpath value="not(exists(f:period)) or exists(f:periodUnit)" /> <source value="http://hl7.org/fhir/StructureDefinition/Timing" /> </constraint> <constraint> <key value="tim-4" /> <severity value="error" /> <human value="duration SHALL be a non-negative value" /> <expression value="duration.exists() implies duration >= 0" /> <xpath value="f:duration/@value >= 0 or not(f:duration/@value)" /> <source value="http://hl7.org/fhir/StructureDefinition/Timing" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="Implies PIVL or EIVL" /> </mapping> </element> <element id="Dosage.timing.repeat.id"> <path value="Dosage.timing.repeat.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Dosage.timing.repeat.extension"> <path value="Dosage.timing.repeat.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Dosage.timing.repeat.bounds[x]"> <path value="Dosage.timing.repeat.bounds[x]" /> <slicing> <discriminator> <type value="type" /> <path value="$this" /> </discriminator> <ordered value="false" /> <rules value="open" /> </slicing> <short value="Length/Range of lengths, or (Start and/or end) limits" /> <definition value="Hier wird abgebildet, in welchem Zeitraum oder in welcher Zeitspanne das Arzneimittel in der spezifischen Dosierung verabreicht/eingenommen wird. Zum Beispiel können hiermit spezifische Zeiträume bei der Auf- oder Ab-Dosierung von Medikamenten abgebildet werden." /> <min value="1" /> <max value="1" /> <base> <path value="Timing.repeat.bounds[x]" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Duration" /> </type> <type> <code value="Range" /> </type> <type> <code value="Period" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="IVL(TS) used in a QSI" /> </mapping> </element> <element id="Dosage.timing.repeat.bounds[x]:boundsDuration"> <path value="Dosage.timing.repeat.bounds[x]" /> <sliceName value="boundsDuration" /> <short value="Length/Range of lengths, or (Start and/or end) limits" /> <definition value="Hier kann angegeben, in welcher festen Zeitspanne das Arzneimittel in der spezifischen Dosierung verabreicht/eingenommen wird. Dabei beginnt und endet der mögliche Zeitraum der Einnahme in dem Zeitraum, welcher innerhalb des Elements \"Verabreichung/Einnahme: Zeitangabe-Auswahl\" -> \"Zeitraum\" auf der obersten Ebene des Profils \"Medikations-Information\" definiert ist. **Beispiel:** * Die Verabreichung/Einnahme eines Arzneimittels erfolgt für 5 Tage, wobei der unter \"Verabreichung/Einnahme: Zeitangabe-Auswahl\" -> \"Zeitraum\" -> \"von\" / \"bis\" definierte Zeitraum am 01.01.2024 beginnt (Element \"von\") und am 10.01.2024 (Element \"bis\") endet. Innerhalb dieses Zeitraums erfolgt die Einnahme für 5 Tage." /> <min value="0" /> <max value="1" /> <base> <path value="Timing.repeat.bounds[x]" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Duration" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="IVL(TS) used in a QSI" /> </mapping> </element> <element id="Dosage.timing.repeat.bounds[x]:boundsDuration.id"> <path value="Dosage.timing.repeat.bounds[x].id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Dosage.timing.repeat.bounds[x]:boundsDuration.extension"> <path value="Dosage.timing.repeat.bounds[x].extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Dosage.timing.repeat.bounds[x]:boundsDuration.value"> <path value="Dosage.timing.repeat.bounds[x].value" /> <short value="Numerical value (with implicit precision)" /> <definition value="Hier kann der Wert der Zeitspanne angegeben werden, innerhalb der das Arzneimittel verabreicht/eingenommen wird." /> <comment value="The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books)." /> <requirements value="Precision is handled implicitly in almost all cases of measurement." /> <min value="1" /> <max value="1" /> <base> <path value="Quantity.value" /> <min value="0" /> <max value="1" /> </base> <type> <code value="decimal" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="SN.2 / CQ - N/A" /> </mapping> <mapping> <identity value="rim" /> <map value="PQ.value, CO.value, MO.value, IVL.high or IVL.low depending on the value" /> </mapping> </element> <element id="Dosage.timing.repeat.bounds[x]:boundsDuration.comparator"> <path value="Dosage.timing.repeat.bounds[x].comparator" /> <short value="< | <= | >= | > - how to understand the value" /> <definition value="How the value should be understood and represented - whether the actual value is greater or less than the stated value due to measurement issues; e.g. if the comparator is "<" , then the real value is < stated value." /> <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" /> <requirements value="Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology." /> <min value="0" /> <max value="1" /> <base> <path value="Quantity.comparator" /> <min value="0" /> <max value="1" /> </base> <type> <code value="code" /> </type> <meaningWhenMissing value="If there is no comparator, then there is no modification of the value" /> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isModifier value="true" /> <isModifierReason value="This is labeled as "Is Modifier" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value" /> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="QuantityComparator" /> </extension> <strength value="required" /> <description value="How the Quantity should be understood and represented." /> <valueSet value="http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="SN.1 / CQ.1" /> </mapping> <mapping> <identity value="rim" /> <map value="IVL properties" /> </mapping> </element> <element id="Dosage.timing.repeat.bounds[x]:boundsDuration.unit"> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable"> <valueBoolean value="true" /> </extension> <path value="Dosage.timing.repeat.bounds[x].unit" /> <short value="Unit representation" /> <definition value="Hier wird die Zeiteinheit in menschenlesbarer Sprache angegeben." /> <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" /> <requirements value="There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms." /> <min value="1" /> <max value="1" /> <base> <path value="Quantity.unit" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="(see OBX.6 etc.) / CQ.2" /> </mapping> <mapping> <identity value="rim" /> <map value="PQ.unit" /> </mapping> </element> <element id="Dosage.timing.repeat.bounds[x]:boundsDuration.system"> <path value="Dosage.timing.repeat.bounds[x].system" /> <short value="System that defines coded unit form" /> <definition value="The identification of the system that provides the coded form of the unit." /> <comment value="see http://en.wikipedia.org/wiki/Uniform_resource_identifier" /> <requirements value="Need to know the system that defines the coded form of the unit." /> <min value="1" /> <max value="1" /> <base> <path value="Quantity.system" /> <min value="0" /> <max value="1" /> </base> <type> <code value="uri" /> </type> <condition value="ele-1" /> <condition value="qty-3" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="(see OBX.6 etc.) / CQ.2" /> </mapping> <mapping> <identity value="rim" /> <map value="CO.codeSystem, PQ.translation.codeSystem" /> </mapping> </element> <element id="Dosage.timing.repeat.bounds[x]:boundsDuration.code"> <path value="Dosage.timing.repeat.bounds[x].code" /> <short value="Coded form of the unit" /> <definition value="Hier wird die Zeiteinheit als Code angegeben." /> <comment value="The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system." /> <requirements value="Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest." /> <min value="1" /> <max value="1" /> <base> <path value="Quantity.code" /> <min value="0" /> <max value="1" /> </base> <type> <code value="code" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="(see OBX.6 etc.) / CQ.2" /> </mapping> <mapping> <identity value="rim" /> <map value="PQ.code, MO.currency, PQ.translation.code" /> </mapping> </element> <element id="Dosage.timing.repeat.bounds[x]:boundsRange"> <path value="Dosage.timing.repeat.bounds[x]" /> <sliceName value="boundsRange" /> <short value="Length/Range of lengths, or (Start and/or end) limits" /> <definition value="Hier kann angegeben, in welcher variablen Zeitspanne das Arzneimittel in der spezifischen Dosierung verabreicht/eingenommen wird. Dabei beginnt und endet der mögliche Zeitraum der Einnahme in dem Zeitraum, welcher innerhalb des Elements \"Verabreichung/Einnahme: Zeitangabe-Auswahl\" -> \"Zeitraum\" auf der obersten Ebene des Profils \"Medikations-Information\" definiert ist. **Beispiel:** * Die Verabreichung/Einnahme eines Arzneimittels erfolgt für 3 Tage (Untergrenze der Zeitspanne) bis 5 Tage (Obergrenze der Zeitspanne), wobei der unter \"Verabreichung/Einnahme: Zeitangabe-Auswahl\" -> \"Zeitraum\" -> \"von\" / \"bis\" definierte Zeitraum am 01.01.2024 beginnt (Element \"von\") und am 10.01.2024 (Element \"bis\") endet. Innerhalb dieses Zeitraums erfolgt die Einnahme für 3 Tage bis 5 Tage." /> <min value="0" /> <max value="1" /> <base> <path value="Timing.repeat.bounds[x]" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Range" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="IVL(TS) used in a QSI" /> </mapping> </element> <element id="Dosage.timing.repeat.bounds[x]:boundsRange.id"> <path value="Dosage.timing.repeat.bounds[x].id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Dosage.timing.repeat.bounds[x]:boundsRange.extension"> <path value="Dosage.timing.repeat.bounds[x].extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Dosage.timing.repeat.bounds[x]:boundsRange.low"> <path value="Dosage.timing.repeat.bounds[x].low" /> <short value="Low limit" /> <definition value="Hier wird die Untergrenze der variablen Zeitspanne abgebildet." /> <comment value="If the low element is missing, the low boundary is not known." /> <min value="0" /> <max value="1" /> <base> <path value="Range.low" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Quantity" /> <profile value="http://hl7.org/fhir/StructureDefinition/SimpleQuantity" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="qty-3" /> <severity value="error" /> <human value="If a code for the unit is present, the system SHALL also be present" /> <expression value="code.empty() or system.exists()" /> <xpath value="not(exists(f:code)) or exists(f:system)" /> <source value="http://hl7.org/fhir/StructureDefinition/Quantity" /> </constraint> <constraint> <key value="sqty-1" /> <severity value="error" /> <human value="The comparator is not used on a SimpleQuantity" /> <expression value="comparator.empty()" /> <xpath value="not(exists(f:comparator))" /> <source value="http://hl7.org/fhir/StructureDefinition/SimpleQuantity" /> </constraint> <mustSupport value="true" /> <isModifier value="false" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="SN (see also Range) or CQ" /> </mapping> <mapping> <identity value="rim" /> <map value="PQ, IVL<PQ>, MO, CO, depending on the values" /> </mapping> <mapping> <identity value="v2" /> <map value="NR.1" /> </mapping> <mapping> <identity value="rim" /> <map value="./low" /> </mapping> </element> <element id="Dosage.timing.repeat.bounds[x]:boundsRange.low.id"> <path value="Dosage.timing.repeat.bounds[x].low.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Dosage.timing.repeat.bounds[x]:boundsRange.low.extension"> <path value="Dosage.timing.repeat.bounds[x].low.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Dosage.timing.repeat.bounds[x]:boundsRange.low.value"> <path value="Dosage.timing.repeat.bounds[x].low.value" /> <short value="Numerical value (with implicit precision)" /> <definition value="Hier kann der Wert der Zeitspanne angegeben werden, innerhalb der das Arzneimittel verabreicht/eingenommen wird." /> <comment value="The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books)." /> <requirements value="Precision is handled implicitly in almost all cases of measurement." /> <min value="1" /> <max value="1" /> <base> <path value="Quantity.value" /> <min value="0" /> <max value="1" /> </base> <type> <code value="decimal" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="SN.2 / CQ - N/A" /> </mapping> <mapping> <identity value="rim" /> <map value="PQ.value, CO.value, MO.value, IVL.high or IVL.low depending on the value" /> </mapping> </element> <element id="Dosage.timing.repeat.bounds[x]:boundsRange.low.comparator"> <path value="Dosage.timing.repeat.bounds[x].low.comparator" /> <short value="< | <= | >= | > - how to understand the value" /> <definition value="Not allowed to be used in this context" /> <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" /> <requirements value="Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology." /> <min value="0" /> <max value="0" /> <base> <path value="Quantity.comparator" /> <min value="0" /> <max value="1" /> </base> <type> <code value="code" /> </type> <meaningWhenMissing value="If there is no comparator, then there is no modification of the value" /> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isModifier value="true" /> <isModifierReason value="This is labeled as "Is Modifier" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value" /> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="QuantityComparator" /> </extension> <strength value="required" /> <description value="How the Quantity should be understood and represented." /> <valueSet value="http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="SN.1 / CQ.1" /> </mapping> <mapping> <identity value="rim" /> <map value="IVL properties" /> </mapping> </element> <element id="Dosage.timing.repeat.bounds[x]:boundsRange.low.unit"> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable"> <valueBoolean value="true" /> </extension> <path value="Dosage.timing.repeat.bounds[x].low.unit" /> <short value="Unit representation" /> <definition value="Hier wird die Zeiteinheit in menschenlesbarer Sprache angegeben." /> <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" /> <requirements value="There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms." /> <min value="1" /> <max value="1" /> <base> <path value="Quantity.unit" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="(see OBX.6 etc.) / CQ.2" /> </mapping> <mapping> <identity value="rim" /> <map value="PQ.unit" /> </mapping> </element> <element id="Dosage.timing.repeat.bounds[x]:boundsRange.low.system"> <path value="Dosage.timing.repeat.bounds[x].low.system" /> <short value="System that defines coded unit form" /> <definition value="The identification of the system that provides the coded form of the unit." /> <comment value="see http://en.wikipedia.org/wiki/Uniform_resource_identifier" /> <requirements value="Need to know the system that defines the coded form of the unit." /> <min value="1" /> <max value="1" /> <base> <path value="Quantity.system" /> <min value="0" /> <max value="1" /> </base> <type> <code value="uri" /> </type> <condition value="ele-1" /> <condition value="qty-3" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="(see OBX.6 etc.) / CQ.2" /> </mapping> <mapping> <identity value="rim" /> <map value="CO.codeSystem, PQ.translation.codeSystem" /> </mapping> </element> <element id="Dosage.timing.repeat.bounds[x]:boundsRange.low.code"> <path value="Dosage.timing.repeat.bounds[x].low.code" /> <short value="Coded form of the unit" /> <definition value="Hier wird die Zeiteinheit als Code angegeben." /> <comment value="The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system." /> <requirements value="Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest." /> <min value="1" /> <max value="1" /> <base> <path value="Quantity.code" /> <min value="0" /> <max value="1" /> </base> <type> <code value="code" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="(see OBX.6 etc.) / CQ.2" /> </mapping> <mapping> <identity value="rim" /> <map value="PQ.code, MO.currency, PQ.translation.code" /> </mapping> </element> <element id="Dosage.timing.repeat.bounds[x]:boundsRange.high"> <path value="Dosage.timing.repeat.bounds[x].high" /> <short value="High limit" /> <definition value="Hier wird die Obergrenze der variablen Zeitspanne abgebildet." /> <comment value="If the high element is missing, the high boundary is not known." /> <min value="0" /> <max value="1" /> <base> <path value="Range.high" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Quantity" /> <profile value="http://hl7.org/fhir/StructureDefinition/SimpleQuantity" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="qty-3" /> <severity value="error" /> <human value="If a code for the unit is present, the system SHALL also be present" /> <expression value="code.empty() or system.exists()" /> <xpath value="not(exists(f:code)) or exists(f:system)" /> <source value="http://hl7.org/fhir/StructureDefinition/Quantity" /> </constraint> <constraint> <key value="sqty-1" /> <severity value="error" /> <human value="The comparator is not used on a SimpleQuantity" /> <expression value="comparator.empty()" /> <xpath value="not(exists(f:comparator))" /> <source value="http://hl7.org/fhir/StructureDefinition/SimpleQuantity" /> </constraint> <mustSupport value="true" /> <isModifier value="false" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="SN (see also Range) or CQ" /> </mapping> <mapping> <identity value="rim" /> <map value="PQ, IVL<PQ>, MO, CO, depending on the values" /> </mapping> <mapping> <identity value="v2" /> <map value="NR.2" /> </mapping> <mapping> <identity value="rim" /> <map value="./high" /> </mapping> </element> <element id="Dosage.timing.repeat.bounds[x]:boundsRange.high.id"> <path value="Dosage.timing.repeat.bounds[x].high.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Dosage.timing.repeat.bounds[x]:boundsRange.high.extension"> <path value="Dosage.timing.repeat.bounds[x].high.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Dosage.timing.repeat.bounds[x]:boundsRange.high.value"> <path value="Dosage.timing.repeat.bounds[x].high.value" /> <short value="Numerical value (with implicit precision)" /> <definition value="Hier kann der Wert der Zeitspanne angegeben werden, innerhalb der das Arzneimittel verabreicht/eingenommen wird." /> <comment value="The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books)." /> <requirements value="Precision is handled implicitly in almost all cases of measurement." /> <min value="1" /> <max value="1" /> <base> <path value="Quantity.value" /> <min value="0" /> <max value="1" /> </base> <type> <code value="decimal" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="SN.2 / CQ - N/A" /> </mapping> <mapping> <identity value="rim" /> <map value="PQ.value, CO.value, MO.value, IVL.high or IVL.low depending on the value" /> </mapping> </element> <element id="Dosage.timing.repeat.bounds[x]:boundsRange.high.comparator"> <path value="Dosage.timing.repeat.bounds[x].high.comparator" /> <short value="< | <= | >= | > - how to understand the value" /> <definition value="Not allowed to be used in this context" /> <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" /> <requirements value="Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology." /> <min value="0" /> <max value="0" /> <base> <path value="Quantity.comparator" /> <min value="0" /> <max value="1" /> </base> <type> <code value="code" /> </type> <meaningWhenMissing value="If there is no comparator, then there is no modification of the value" /> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isModifier value="true" /> <isModifierReason value="This is labeled as "Is Modifier" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value" /> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="QuantityComparator" /> </extension> <strength value="required" /> <description value="How the Quantity should be understood and represented." /> <valueSet value="http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="SN.1 / CQ.1" /> </mapping> <mapping> <identity value="rim" /> <map value="IVL properties" /> </mapping> </element> <element id="Dosage.timing.repeat.bounds[x]:boundsRange.high.unit"> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable"> <valueBoolean value="true" /> </extension> <path value="Dosage.timing.repeat.bounds[x].high.unit" /> <short value="Unit representation" /> <definition value="Hier wird die Zeiteinheit in menschenlesbarer Sprache angegeben." /> <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" /> <requirements value="There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms." /> <min value="1" /> <max value="1" /> <base> <path value="Quantity.unit" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="(see OBX.6 etc.) / CQ.2" /> </mapping> <mapping> <identity value="rim" /> <map value="PQ.unit" /> </mapping> </element> <element id="Dosage.timing.repeat.bounds[x]:boundsRange.high.system"> <path value="Dosage.timing.repeat.bounds[x].high.system" /> <short value="System that defines coded unit form" /> <definition value="The identification of the system that provides the coded form of the unit." /> <comment value="see http://en.wikipedia.org/wiki/Uniform_resource_identifier" /> <requirements value="Need to know the system that defines the coded form of the unit." /> <min value="1" /> <max value="1" /> <base> <path value="Quantity.system" /> <min value="0" /> <max value="1" /> </base> <type> <code value="uri" /> </type> <condition value="ele-1" /> <condition value="qty-3" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="(see OBX.6 etc.) / CQ.2" /> </mapping> <mapping> <identity value="rim" /> <map value="CO.codeSystem, PQ.translation.codeSystem" /> </mapping> </element> <element id="Dosage.timing.repeat.bounds[x]:boundsRange.high.code"> <path value="Dosage.timing.repeat.bounds[x].high.code" /> <short value="Coded form of the unit" /> <definition value="Hier wird die Zeiteinheit als Code angegeben." /> <comment value="The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system." /> <requirements value="Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest." /> <min value="1" /> <max value="1" /> <base> <path value="Quantity.code" /> <min value="0" /> <max value="1" /> </base> <type> <code value="code" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="(see OBX.6 etc.) / CQ.2" /> </mapping> <mapping> <identity value="rim" /> <map value="PQ.code, MO.currency, PQ.translation.code" /> </mapping> </element> <element id="Dosage.timing.repeat.bounds[x]:boundsPeriod"> <path value="Dosage.timing.repeat.bounds[x]" /> <sliceName value="boundsPeriod" /> <short value="Length/Range of lengths, or (Start and/or end) limits" /> <definition value="Hier wird abgebildet, in welchem Zeitraum das Arzneimittel in der spezifischen Dosierung verabreicht/eingenommen wird. **Beispiel:** * Abbildung spezifischer Zeiträume bei der Auf- oder Ab-Dosierung von Medikamenten unter Angabe von konkreten Datumsangaben." /> <min value="0" /> <max value="1" /> <base> <path value="Timing.repeat.bounds[x]" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Period" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="IVL(TS) used in a QSI" /> </mapping> </element> <element id="Dosage.timing.repeat.bounds[x]:boundsPeriod.id"> <path value="Dosage.timing.repeat.bounds[x].id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Dosage.timing.repeat.bounds[x]:boundsPeriod.extension"> <path value="Dosage.timing.repeat.bounds[x].extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Dosage.timing.repeat.bounds[x]:boundsPeriod.start"> <path value="Dosage.timing.repeat.bounds[x].start" /> <short value="Starting time with inclusive boundary" /> <definition value="Hier wird der Beginn des dosisspezifischen Zeitraumes angegeben." /> <comment value="If the low element is missing, the meaning is that the low boundary is not known." /> <min value="1" /> <max value="1" /> <base> <path value="Period.start" /> <min value="0" /> <max value="1" /> </base> <type> <code value="dateTime" /> </type> <condition value="ele-1" /> <condition value="per-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="DR.1" /> </mapping> <mapping> <identity value="rim" /> <map value="./low" /> </mapping> </element> <element id="Dosage.timing.repeat.bounds[x]:boundsPeriod.end"> <path value="Dosage.timing.repeat.bounds[x].end" /> <short value="End time with inclusive boundary, if not ongoing" /> <definition value="Hier wird das Ende des dosisspezifischen Zeitraumes angegeben." /> <comment value="The high value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has an end value of 2012-02-03." /> <min value="0" /> <max value="1" /> <base> <path value="Period.end" /> <min value="0" /> <max value="1" /> </base> <type> <code value="dateTime" /> </type> <meaningWhenMissing value="If the end of the period is missing, it means that the period is ongoing" /> <condition value="ele-1" /> <condition value="per-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="DR.2" /> </mapping> <mapping> <identity value="rim" /> <map value="./high" /> </mapping> </element> <element id="Dosage.timing.repeat.count"> <path value="Dosage.timing.repeat.count" /> <short value="Number of times to repeat" /> <definition value="Hier kann die absolute Anzahl der Wiederholungen einer Verabreichung/Einnahme eines Arzneimittels als Zahl angegeben werden. **Beispiel:** * Anzahl der Einnahmen eines Arzneimittels = 5" /> <comment value="If you have both bounds and count, then this should be understood as within the bounds period, until count times happens." /> <requirements value="Repetitions may be limited by end time or total occurrences." /> <min value="0" /> <max value="1" /> <base> <path value="Timing.repeat.count" /> <min value="0" /> <max value="1" /> </base> <type> <code value="positiveInt" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="PIVL.count" /> </mapping> </element> <element id="Dosage.timing.repeat.countMax"> <path value="Dosage.timing.repeat.countMax" /> <short value="Maximum number of times to repeat" /> <definition value="Hier kann die maximale Anzahl der Wiederholungen einer Verabreichung/Einnahme eines Arzneimittels als Zahl angegeben werden. Eine maximale Anzahl der Wiederholungen kann nur angegeben werden, wenn eine absolute Anzahl der Wiederholungen einer Verabreichung/Einnahme eines Arzneimittels angegeben ist. **Beispiel:** * Maximale Anzahl der Einnahmen eines Arzneimittels = 10" /> <comment value="32 bit number; for values larger than this, use decimal" /> <min value="0" /> <max value="1" /> <base> <path value="Timing.repeat.countMax" /> <min value="0" /> <max value="1" /> </base> <type> <code value="positiveInt" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="PIVL.count" /> </mapping> </element> <element id="Dosage.timing.repeat.duration"> <path value="Dosage.timing.repeat.duration" /> <short value="How long when it happens" /> <definition value="Hier kann der Wert der Zeitspanne angegeben werden, innerhalb der das Arzneimittel verabreicht/eingenommen wird." /> <comment value="For some events the duration is part of the definition of the event (e.g. IV infusions, where the duration is implicit in the specified quantity and rate). For others, it's part of the timing specification (e.g. exercise)." /> <requirements value="Some activities are not instantaneous and need to be maintained for a period of time." /> <min value="0" /> <max value="1" /> <base> <path value="Timing.repeat.duration" /> <min value="0" /> <max value="1" /> </base> <type> <code value="decimal" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="PIVL.phase" /> </mapping> </element> <element id="Dosage.timing.repeat.durationMax"> <path value="Dosage.timing.repeat.durationMax" /> <short value="How long when it happens (Max)" /> <definition value="Hier kann der maximale Wert der Zeitspanne angegeben werden, innerhalb der das Arzneimittel verabreicht/eingenommen wird. Eine maximale Zeitspanne kann nur angegeben werden, wenn eine feste Zeitspanne für die Dauer der einzelnen Verabreichung/Einnahme angegeben wird." /> <comment value="For some events the duration is part of the definition of the event (e.g. IV infusions, where the duration is implicit in the specified quantity and rate). For others, it's part of the timing specification (e.g. exercise)." /> <requirements value="Some activities are not instantaneous and need to be maintained for a period of time." /> <min value="0" /> <max value="1" /> <base> <path value="Timing.repeat.durationMax" /> <min value="0" /> <max value="1" /> </base> <type> <code value="decimal" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="PIVL.phase" /> </mapping> </element> <element id="Dosage.timing.repeat.durationUnit"> <path value="Dosage.timing.repeat.durationUnit" /> <short value="s | min | h | d | wk | mo | a - unit of time (UCUM)" /> <definition value="Hier wird die Zeiteinheit angegeben." /> <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" /> <min value="0" /> <max value="1" /> <base> <path value="Timing.repeat.durationUnit" /> <min value="0" /> <max value="1" /> </base> <type> <code value="code" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="UnitsOfTime" /> </extension> <strength value="required" /> <description value="A unit of time (units from UCUM)." /> <valueSet value="http://hl7.org/fhir/ValueSet/units-of-time|4.0.1" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="PIVL.phase.unit" /> </mapping> </element> <element id="Dosage.timing.repeat.frequency"> <path value="Dosage.timing.repeat.frequency" /> <short value="Event occurs frequency times per period" /> <definition value="Hier wird angegeben, mit welcher Frequenz das Arzneimittel innerhalb einer bestimmten Zeitspanne verabreicht/eingenommen wird." /> <comment value="32 bit number; for values larger than this, use decimal" /> <min value="0" /> <max value="1" /> <base> <path value="Timing.repeat.frequency" /> <min value="0" /> <max value="1" /> </base> <type> <code value="positiveInt" /> </type> <meaningWhenMissing value="If no frequency is stated, the assumption is that the event occurs once per period, but systems SHOULD always be specific about this" /> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="PIVL.phase" /> </mapping> </element> <element id="Dosage.timing.repeat.frequencyMax"> <path value="Dosage.timing.repeat.frequencyMax" /> <short value="Event occurs up to frequencyMax times per period" /> <definition value="Hier wird angegeben, mit welcher Frequenz das Arzneimittel innerhalb einer bestimmten Zeitspanne verabreicht/eingenommen wird." /> <comment value="32 bit number; for values larger than this, use decimal" /> <min value="0" /> <max value="1" /> <base> <path value="Timing.repeat.frequencyMax" /> <min value="0" /> <max value="1" /> </base> <type> <code value="positiveInt" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="PIVL.phase" /> </mapping> </element> <element id="Dosage.timing.repeat.period"> <path value="Dosage.timing.repeat.period" /> <short value="Event occurs frequency times per period" /> <definition value="Hier wird der absolute Wert der Zeitspanne angegeben, innerhalb der die definierte Anzahl der Verabreichungen/Einnahmen durchgeführt wird." /> <comment value="Do not use an IEEE type floating point type, instead use something that works like a true decimal, with inbuilt precision (e.g. Java BigInteger)" /> <min value="0" /> <max value="1" /> <base> <path value="Timing.repeat.period" /> <min value="0" /> <max value="1" /> </base> <type> <code value="decimal" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="PIVL.phase" /> </mapping> </element> <element id="Dosage.timing.repeat.periodMax"> <path value="Dosage.timing.repeat.periodMax" /> <short value="Upper limit of period (3-4 hours)" /> <definition value="Hier wird der maximale Wert der Zeitspanne angegeben, innerhalb der die definierte Anzahl der Verabreichungen/Einnahmen durchgeführt wird. Wenn ein maximaler Wert der Zeitspanne angegeben wird, muss ein absoluter Wert der Zeitspanne angegeben werden. In diesem Fall definieren die beiden Werte "Absoluter Wert der Zeitspanne" und "Maximaler Wert der Zeitspanne" einen Bereich für die Zeitspanne. Der absolute Wert der Zeitspanne entspricht dann der Untergrenze für einen Bereich der Zeitspanne und der maximale Wert der Zeitspanne der Obergrenze für den Bereich der Zeitspanne." /> <comment value="Do not use an IEEE type floating point type, instead use something that works like a true decimal, with inbuilt precision (e.g. Java BigInteger)" /> <min value="0" /> <max value="1" /> <base> <path value="Timing.repeat.periodMax" /> <min value="0" /> <max value="1" /> </base> <type> <code value="decimal" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="PIVL.phase" /> </mapping> </element> <element id="Dosage.timing.repeat.periodUnit"> <path value="Dosage.timing.repeat.periodUnit" /> <short value="s | min | h | d | wk | mo | a - unit of time (UCUM)" /> <definition value="Hier wird die Zeiteinheit angegeben." /> <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" /> <min value="0" /> <max value="1" /> <base> <path value="Timing.repeat.periodUnit" /> <min value="0" /> <max value="1" /> </base> <type> <code value="code" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="UnitsOfTime" /> </extension> <strength value="required" /> <description value="A unit of time (units from UCUM)." /> <valueSet value="http://hl7.org/fhir/ValueSet/units-of-time|4.0.1" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="PIVL.phase.unit" /> </mapping> </element> <element id="Dosage.timing.repeat.dayOfWeek"> <path value="Dosage.timing.repeat.dayOfWeek" /> <short value="mon | tue | wed | thu | fri | sat | sun" /> <definition value="Hier wird der Wochentag, an dem das Arzneimittel verabreicht/eingenommen werden soll, angegeben." /> <comment value="If no days are specified, the action is assumed to happen every day as otherwise specified. The elements frequency and period cannot be used as well as dayOfWeek." /> <min value="0" /> <max value="*" /> <base> <path value="Timing.repeat.dayOfWeek" /> <min value="0" /> <max value="*" /> </base> <type> <code value="code" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="DayOfWeek" /> </extension> <strength value="required" /> <valueSet value="http://hl7.org/fhir/ValueSet/days-of-week|4.0.1" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Dosage.timing.repeat.timeOfDay"> <path value="Dosage.timing.repeat.timeOfDay" /> <short value="Time of day for action" /> <definition value="Hier werden Uhrzeiten angegeben, zu denen das Arzneimittel verabreicht/eingenommen wird." /> <comment value="When time of day is specified, it is inferred that the action happens every day (as filtered by dayofWeek) on the specified times. The elements when, frequency and period cannot be used as well as timeOfDay." /> <min value="0" /> <max value="*" /> <base> <path value="Timing.repeat.timeOfDay" /> <min value="0" /> <max value="*" /> </base> <type> <code value="time" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Dosage.timing.repeat.when"> <path value="Dosage.timing.repeat.when" /> <slicing> <discriminator> <type value="pattern" /> <path value="$this" /> </discriminator> <rules value="open" /> </slicing> <short value="Code for time period of occurrence" /> <definition value="Hier werden Tageszeiten angegeben, zu denen das Arzneimittel verabreicht/eingenommen wird. Ergänzend können Zusatzinformationen angegeben werden, die die Verabreichung/Einnahme des Arzneimittels in Bezug zu Mahlzeiten und Schlafzeiten abbilden." /> <comment value="When more than one event is listed, the event is tied to the union of the specified events." /> <requirements value="Timings are frequently determined by occurrences such as waking, eating and sleep." /> <min value="0" /> <max value="*" /> <base> <path value="Timing.repeat.when" /> <min value="0" /> <max value="*" /> </base> <type> <code value="code" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="EventTiming" /> </extension> <strength value="required" /> <description value="Real world event relating to the schedule." /> <valueSet value="http://hl7.org/fhir/ValueSet/event-timing|4.0.1" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="EIVL.event" /> </mapping> </element> <element id="Dosage.timing.repeat.when:period-of-day"> <path value="Dosage.timing.repeat.when" /> <sliceName value="period-of-day" /> <short value="Code for time period of occurrence" /> <definition value="Hier werden Tageszeiten, zu denen das Arzneimittel verabreicht/eingenommen wird, als Code aus dem FHIR ValueSet http://hl7.org/fhir/ValueSet/event-timing angegeben. Dabei spiegeln die vier möglichen Konzepte "Morgens", "Mittags", "Abends", "Nachts" das in der Praxis übliche "4er-Einnahmeschema" wieder (beispielsweise "0-1-0-0" entspricht dem Konzept "Einnahme von einer Tablette Mittags")." /> <comment value="When more than one event is listed, the event is tied to the union of the specified events." /> <requirements value="Timings are frequently determined by occurrences such as waking, eating and sleep." /> <min value="0" /> <max value="1" /> <base> <path value="Timing.repeat.when" /> <min value="0" /> <max value="*" /> </base> <type> <code value="code" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="EventTiming" /> </extension> <strength value="required" /> <description value="Real world event relating to the schedule." /> <valueSet value="https://gematik.de/fhir/terminology/ValueSet/epa-event-timing-vs" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="EIVL.event" /> </mapping> </element> <element id="Dosage.timing.repeat.when:meal-sleep-times"> <path value="Dosage.timing.repeat.when" /> <sliceName value="meal-sleep-times" /> <short value="Code for time period of occurrence" /> <definition value="Hier wird eine mahlzeiten- und schlafzeitenabhängige Zusatzinformation zur Einnahme eines Arzneimittels als Code aus dem FHIR ValueSet http://hl7.org/fhir/ValueSet/event-timing angegeben." /> <comment value="When more than one event is listed, the event is tied to the union of the specified events." /> <requirements value="Timings are frequently determined by occurrences such as waking, eating and sleep." /> <min value="0" /> <max value="*" /> <base> <path value="Timing.repeat.when" /> <min value="0" /> <max value="*" /> </base> <type> <code value="code" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="EventTiming" /> </extension> <strength value="required" /> <description value="Real world event relating to the schedule." /> <valueSet value="https://gematik.de/fhir/terminology/ValueSet/epa-timing-event-vs" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="EIVL.event" /> </mapping> </element> <element id="Dosage.timing.repeat.offset"> <path value="Dosage.timing.repeat.offset" /> <short value="Minutes from event (before or after)" /> <definition value="Hier wird der Zeitabstand der Verabreichung/Einnahme eines Arzneimittels zu einer Mahlzeit oder der Schlafzeit in Minuten angegeben." /> <comment value="32 bit number; for values larger than this, use decimal" /> <min value="0" /> <max value="1" /> <base> <path value="Timing.repeat.offset" /> <min value="0" /> <max value="1" /> </base> <type> <code value="unsignedInt" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="EIVL.offset" /> </mapping> </element> <element id="Dosage.timing.code"> <path value="Dosage.timing.code" /> <short value="BID | TID | QID | AM | PM | QD | QOD | +" /> <definition value="A code for the timing schedule (or just text in code.text). Some codes such as BID are ubiquitous, but many institutions define their own additional codes. If a code is provided, the code is understood to be a complete statement of whatever is specified in the structured timing data, and either the code or the data may be used to interpret the Timing, with the exception that .repeat.bounds still applies over the code (and is not contained in the code)." /> <comment value="BID etc. are defined as 'at institutionally specified times'. For example, an institution may choose that BID is "always at 7am and 6pm". If it is inappropriate for this choice to be made, the code BID should not be used. Instead, a distinct organization-specific code should be used in place of the HL7-defined BID code and/or a structured representation should be used (in this case, specifying the two event times)." /> <min value="0" /> <max value="1" /> <base> <path value="Timing.code" /> <min value="0" /> <max value="1" /> </base> <type> <code value="CodeableConcept" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="TimingAbbreviation" /> </extension> <strength value="preferred" /> <description value="Code for a known / defined timing pattern." /> <valueSet value="http://hl7.org/fhir/ValueSet/timing-abbreviation" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CE/CNE/CWE" /> </mapping> <mapping> <identity value="rim" /> <map value="CD" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:CodeableConcept rdfs:subClassOf dt:CD" /> </mapping> <mapping> <identity value="rim" /> <map value="QSC.code" /> </mapping> </element> <element id="Dosage.asNeeded[x]"> <path value="Dosage.asNeeded[x]" /> <slicing> <discriminator> <type value="type" /> <path value="$this" /> </discriminator> <ordered value="false" /> <rules value="open" /> </slicing> <short value="Take "as needed" (for x)" /> <definition value="Hier werden Angaben zur Dosierung als Bedarfsmedikation gemacht." /> <comment value="Can express "as needed" without a reason by setting the Boolean = True. In this case the CodeableConcept is not populated. Or you can express "as needed" with a reason by including the CodeableConcept. In this case the Boolean is assumed to be True. If you set the Boolean to False, then the dose is given according to the schedule and is not "prn" or "as needed"." /> <min value="0" /> <max value="1" /> <base> <path value="Dosage.asNeeded[x]" /> <min value="0" /> <max value="1" /> </base> <type> <code value="boolean" /> </type> <type> <code value="CodeableConcept" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="MedicationAsNeededReason" /> </extension> <strength value="example" /> <description value="A coded concept identifying the precondition that should be met or evaluated prior to consuming or administering a medication dose. For example "pain", "30 minutes prior to sexual intercourse", "on flare-up" etc." /> <valueSet value="http://hl7.org/fhir/ValueSet/medication-as-needed-reason" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="TQ1-9" /> </mapping> <mapping> <identity value="rim" /> <map value=".outboundRelationship[typeCode=PRCN].target[classCode=OBS, moodCode=EVN, code="as needed"].value=boolean or codable concept" /> </mapping> </element> <element id="Dosage.asNeeded[x]:asNeededBoolean"> <path value="Dosage.asNeeded[x]" /> <sliceName value="asNeededBoolean" /> <short value="Take "as needed" (for x)" /> <definition value="Hier wird angegeben, ob es sich um eine Bedarfsmedikation handelt." /> <comment value="Can express "as needed" without a reason by setting the Boolean = True. In this case the CodeableConcept is not populated. Or you can express "as needed" with a reason by including the CodeableConcept. In this case the Boolean is assumed to be True. If you set the Boolean to False, then the dose is given according to the schedule and is not "prn" or "as needed"." /> <min value="0" /> <max value="1" /> <base> <path value="Dosage.asNeeded[x]" /> <min value="0" /> <max value="1" /> </base> <type> <code value="boolean" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="TQ1-9" /> </mapping> <mapping> <identity value="rim" /> <map value=".outboundRelationship[typeCode=PRCN].target[classCode=OBS, moodCode=EVN, code="as needed"].value=boolean or codable concept" /> </mapping> </element> <element id="Dosage.asNeeded[x]:asNeededCodeableConcept"> <path value="Dosage.asNeeded[x]" /> <sliceName value="asNeededCodeableConcept" /> <short value="Take "as needed" (for x)" /> <definition value="Hier wird angegeben, welcher Zustand die Bedingung zur Verabreichung/Einnahme der Bedarfsmedikation ist, z. B. Schmerzen, Übelkeit, usw." /> <comment value="Can express "as needed" without a reason by setting the Boolean = True. In this case the CodeableConcept is not populated. Or you can express "as needed" with a reason by including the CodeableConcept. In this case the Boolean is assumed to be True. If you set the Boolean to False, then the dose is given according to the schedule and is not "prn" or "as needed"." /> <min value="0" /> <max value="1" /> <base> <path value="Dosage.asNeeded[x]" /> <min value="0" /> <max value="1" /> </base> <type> <code value="CodeableConcept" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="MedicationAsNeededReason" /> </extension> <strength value="example" /> <description value="A coded concept identifying the precondition that should be met or evaluated prior to consuming or administering a medication dose. For example "pain", "30 minutes prior to sexual intercourse", "on flare-up" etc." /> <valueSet value="http://hl7.org/fhir/ValueSet/medication-as-needed-reason" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="TQ1-9" /> </mapping> <mapping> <identity value="rim" /> <map value=".outboundRelationship[typeCode=PRCN].target[classCode=OBS, moodCode=EVN, code="as needed"].value=boolean or codable concept" /> </mapping> </element> <element id="Dosage.asNeeded[x]:asNeededCodeableConcept.id"> <path value="Dosage.asNeeded[x].id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Dosage.asNeeded[x]:asNeededCodeableConcept.extension"> <path value="Dosage.asNeeded[x].extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Dosage.asNeeded[x]:asNeededCodeableConcept.coding"> <path value="Dosage.asNeeded[x].coding" /> <slicing> <discriminator> <type value="pattern" /> <path value="$this" /> </discriminator> <rules value="open" /> </slicing> <short value="Code defined by a terminology system" /> <definition value="Hier werden Codes angegeben." /> <comment value="Das MustSupport gilt nur für die vordefinierten Slices." /> <requirements value="Allows for alternative encodings within a code system, and translations to other code systems." /> <min value="0" /> <max value="*" /> <base> <path value="CodeableConcept.coding" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Coding" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CE/CNE/CWE subset one of the sets of component 1-3 or 4-6" /> </mapping> <mapping> <identity value="rim" /> <map value="CV" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:Coding rdfs:subClassOf dt:CDCoding" /> </mapping> <mapping> <identity value="v2" /> <map value="C*E.1-8, C*E.10-22" /> </mapping> <mapping> <identity value="rim" /> <map value="union(., ./translation)" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding" /> </mapping> </element> <element id="Dosage.asNeeded[x]:asNeededCodeableConcept.coding:snomed"> <path value="Dosage.asNeeded[x].coding" /> <sliceName value="snomed" /> <short value="Code defined by a terminology system" /> <definition value="Hier wird ein Code aus dem Code-System SNOMED CT® eingetragen. Die Bedingung zum Auslösen einer Bedarfsmedikation ist ein breites Feld, welches das gesamte Spektrum der Medizin umfassen kann und ist deshalb in FHIR® als Example-binding von SNOMED CT®-Konzepten in den Subklassen der SCTID 404684003 vorgesehen, siehe http://hl7.org/fhir/ValueSet/medication-as-needed-reason." /> <comment value="Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true." /> <requirements value="Allows for alternative encodings within a code system, and translations to other code systems." /> <min value="0" /> <max value="1" /> <base> <path value="CodeableConcept.coding" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Coding" /> </type> <patternCoding> <system value="http://snomed.info/sct" /> </patternCoding> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <binding> <strength value="required" /> <valueSet value="https://gematik.de/fhir/terminology/ValueSet/epa-prn-medication-reason-snomed-ct-vs" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CE/CNE/CWE subset one of the sets of component 1-3 or 4-6" /> </mapping> <mapping> <identity value="rim" /> <map value="CV" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:Coding rdfs:subClassOf dt:CDCoding" /> </mapping> <mapping> <identity value="v2" /> <map value="C*E.1-8, C*E.10-22" /> </mapping> <mapping> <identity value="rim" /> <map value="union(., ./translation)" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding" /> </mapping> </element> <element id="Dosage.asNeeded[x]:asNeededCodeableConcept.coding:snomed.id"> <path value="Dosage.asNeeded[x].coding.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Dosage.asNeeded[x]:asNeededCodeableConcept.coding:snomed.extension"> <path value="Dosage.asNeeded[x].coding.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Dosage.asNeeded[x]:asNeededCodeableConcept.coding:snomed.system"> <path value="Dosage.asNeeded[x].coding.system" /> <short value="Identity of the terminology system" /> <definition value="The identification of the code system that defines the meaning of the symbol in the code." /> <comment value="The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously." /> <requirements value="Need to be unambiguous about the source of the definition of the symbol." /> <min value="1" /> <max value="1" /> <base> <path value="Coding.system" /> <min value="0" /> <max value="1" /> </base> <type> <code value="uri" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="C*E.3" /> </mapping> <mapping> <identity value="rim" /> <map value="./codeSystem" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem" /> </mapping> </element> <element id="Dosage.asNeeded[x]:asNeededCodeableConcept.coding:snomed.version"> <path value="Dosage.asNeeded[x].coding.version" /> <short value="Version of the system - if relevant" /> <definition value="The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged." /> <comment value="Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date." /> <min value="1" /> <max value="1" /> <base> <path value="Coding.version" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="C*E.7" /> </mapping> <mapping> <identity value="rim" /> <map value="./codeSystemVersion" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion" /> </mapping> </element> <element id="Dosage.asNeeded[x]:asNeededCodeableConcept.coding:snomed.code"> <path value="Dosage.asNeeded[x].coding.code" /> <short value="Symbol in syntax defined by the system" /> <definition value="A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination)." /> <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" /> <requirements value="Need to refer to a particular code in the system." /> <min value="1" /> <max value="1" /> <base> <path value="Coding.code" /> <min value="0" /> <max value="1" /> </base> <type> <code value="code" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="C*E.1" /> </mapping> <mapping> <identity value="rim" /> <map value="./code" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code" /> </mapping> </element> <element id="Dosage.asNeeded[x]:asNeededCodeableConcept.coding:snomed.display"> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable"> <valueBoolean value="true" /> </extension> <path value="Dosage.asNeeded[x].coding.display" /> <short value="Representation defined by the system" /> <definition value="A representation of the meaning of the code in the system, following the rules of the system." /> <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" /> <requirements value="Need to be able to carry a human-readable meaning of the code for readers that do not know the system." /> <min value="1" /> <max value="1" /> <base> <path value="Coding.display" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="C*E.2 - but note this is not well followed" /> </mapping> <mapping> <identity value="rim" /> <map value="CV.displayName" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName" /> </mapping> </element> <element id="Dosage.asNeeded[x]:asNeededCodeableConcept.coding:snomed.userSelected"> <path value="Dosage.asNeeded[x].coding.userSelected" /> <short value="If this coding was chosen directly by the user" /> <definition value="Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays)." /> <comment value="Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely." /> <requirements value="This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing." /> <min value="0" /> <max value="1" /> <base> <path value="Coding.userSelected" /> <min value="0" /> <max value="1" /> </base> <type> <code value="boolean" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="Sometimes implied by being first" /> </mapping> <mapping> <identity value="rim" /> <map value="CD.codingRationale" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]" /> </mapping> </element> <element id="Dosage.asNeeded[x]:asNeededCodeableConcept.text"> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable"> <valueBoolean value="true" /> </extension> <path value="Dosage.asNeeded[x].text" /> <short value="Plain text representation of the concept" /> <definition value="Hier wird die Bedingung zur Verabreichung/Einnahme der Bedarfsmedikation als Freitext angegeben." /> <comment value="Very often the text is the same as a displayName of one of the codings." /> <requirements value="The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source." /> <min value="0" /> <max value="1" /> <base> <path value="CodeableConcept.text" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="C*E.9. But note many systems use C*E.2 for this" /> </mapping> <mapping> <identity value="rim" /> <map value="./originalText[mediaType/code="text/plain"]/data" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText" /> </mapping> </element> <element id="Dosage.site"> <path value="Dosage.site" /> <short value="Body site to administer to" /> <definition value="Body site to administer to." /> <comment value="If the use case requires attributes from the BodySite resource (e.g. to identify and track separately) then use the standard extension [bodySite](extension-bodysite.html). May be a summary code, or a reference to a very precise definition of the location, or both." /> <requirements value="A coded specification of the anatomic site where the medication first enters the body." /> <min value="0" /> <max value="1" /> <base> <path value="Dosage.site" /> <min value="0" /> <max value="1" /> </base> <type> <code value="CodeableConcept" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="MedicationAdministrationSite" /> </extension> <strength value="example" /> <description value="A coded concept describing the site location the medicine enters into or onto the body." /> <valueSet value="http://hl7.org/fhir/ValueSet/approach-site-codes" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CE/CNE/CWE" /> </mapping> <mapping> <identity value="rim" /> <map value="CD" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:CodeableConcept rdfs:subClassOf dt:CD" /> </mapping> <mapping> <identity value="v2" /> <map value="RXR-2" /> </mapping> <mapping> <identity value="rim" /> <map value=".approachSiteCode" /> </mapping> </element> <element id="Dosage.site.id"> <path value="Dosage.site.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Dosage.site.extension"> <path value="Dosage.site.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Dosage.site.coding"> <path value="Dosage.site.coding" /> <slicing> <discriminator> <type value="pattern" /> <path value="$this" /> </discriminator> <rules value="open" /> </slicing> <short value="Code defined by a terminology system" /> <definition value="A reference to a code defined by a terminology system." /> <comment value="Das MustSupport gilt nur für die vordefinierten Slices." /> <requirements value="Allows for alternative encodings within a code system, and translations to other code systems." /> <min value="0" /> <max value="*" /> <base> <path value="CodeableConcept.coding" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Coding" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CE/CNE/CWE subset one of the sets of component 1-3 or 4-6" /> </mapping> <mapping> <identity value="rim" /> <map value="CV" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:Coding rdfs:subClassOf dt:CDCoding" /> </mapping> <mapping> <identity value="v2" /> <map value="C*E.1-8, C*E.10-22" /> </mapping> <mapping> <identity value="rim" /> <map value="union(., ./translation)" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding" /> </mapping> </element> <element id="Dosage.site.coding:snomed"> <path value="Dosage.site.coding" /> <sliceName value="snomed" /> <short value="Code defined by a terminology system" /> <definition value="A reference to a code defined by a terminology system." /> <comment value="Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true." /> <requirements value="Allows for alternative encodings within a code system, and translations to other code systems." /> <min value="0" /> <max value="1" /> <base> <path value="CodeableConcept.coding" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Coding" /> </type> <patternCoding> <system value="http://snomed.info/sct" /> </patternCoding> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CE/CNE/CWE subset one of the sets of component 1-3 or 4-6" /> </mapping> <mapping> <identity value="rim" /> <map value="CV" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:Coding rdfs:subClassOf dt:CDCoding" /> </mapping> <mapping> <identity value="v2" /> <map value="C*E.1-8, C*E.10-22" /> </mapping> <mapping> <identity value="rim" /> <map value="union(., ./translation)" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding" /> </mapping> </element> <element id="Dosage.site.coding:snomed.id"> <path value="Dosage.site.coding.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Dosage.site.coding:snomed.extension"> <path value="Dosage.site.coding.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Dosage.site.coding:snomed.system"> <path value="Dosage.site.coding.system" /> <short value="Identity of the terminology system" /> <definition value="The identification of the code system that defines the meaning of the symbol in the code." /> <comment value="The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously." /> <requirements value="Need to be unambiguous about the source of the definition of the symbol." /> <min value="1" /> <max value="1" /> <base> <path value="Coding.system" /> <min value="0" /> <max value="1" /> </base> <type> <code value="uri" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="C*E.3" /> </mapping> <mapping> <identity value="rim" /> <map value="./codeSystem" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem" /> </mapping> </element> <element id="Dosage.site.coding:snomed.version"> <path value="Dosage.site.coding.version" /> <short value="Version of the system - if relevant" /> <definition value="The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged." /> <comment value="Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date." /> <min value="1" /> <max value="1" /> <base> <path value="Coding.version" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="C*E.7" /> </mapping> <mapping> <identity value="rim" /> <map value="./codeSystemVersion" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion" /> </mapping> </element> <element id="Dosage.site.coding:snomed.code"> <path value="Dosage.site.coding.code" /> <short value="Symbol in syntax defined by the system" /> <definition value="A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination)." /> <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" /> <requirements value="Need to refer to a particular code in the system." /> <min value="1" /> <max value="1" /> <base> <path value="Coding.code" /> <min value="0" /> <max value="1" /> </base> <type> <code value="code" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="C*E.1" /> </mapping> <mapping> <identity value="rim" /> <map value="./code" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code" /> </mapping> </element> <element id="Dosage.site.coding:snomed.display"> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable"> <valueBoolean value="true" /> </extension> <path value="Dosage.site.coding.display" /> <short value="Representation defined by the system" /> <definition value="A representation of the meaning of the code in the system, following the rules of the system." /> <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" /> <requirements value="Need to be able to carry a human-readable meaning of the code for readers that do not know the system." /> <min value="1" /> <max value="1" /> <base> <path value="Coding.display" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="C*E.2 - but note this is not well followed" /> </mapping> <mapping> <identity value="rim" /> <map value="CV.displayName" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName" /> </mapping> </element> <element id="Dosage.site.coding:snomed.userSelected"> <path value="Dosage.site.coding.userSelected" /> <short value="If this coding was chosen directly by the user" /> <definition value="Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays)." /> <comment value="Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely." /> <requirements value="This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing." /> <min value="0" /> <max value="1" /> <base> <path value="Coding.userSelected" /> <min value="0" /> <max value="1" /> </base> <type> <code value="boolean" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="Sometimes implied by being first" /> </mapping> <mapping> <identity value="rim" /> <map value="CD.codingRationale" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]" /> </mapping> </element> <element id="Dosage.site.text"> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable"> <valueBoolean value="true" /> </extension> <path value="Dosage.site.text" /> <short value="Plain text representation of the concept" /> <definition value="A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user." /> <comment value="Very often the text is the same as a displayName of one of the codings." /> <requirements value="The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source." /> <min value="0" /> <max value="1" /> <base> <path value="CodeableConcept.text" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="C*E.9. But note many systems use C*E.2 for this" /> </mapping> <mapping> <identity value="rim" /> <map value="./originalText[mediaType/code="text/plain"]/data" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText" /> </mapping> </element> <element id="Dosage.route"> <path value="Dosage.route" /> <short value="How drug should enter body" /> <definition value="How drug should enter body." /> <comment value="Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination." /> <requirements value="A code specifying the route or physiological path of administration of a therapeutic agent into or onto a patient's body." /> <min value="0" /> <max value="1" /> <base> <path value="Dosage.route" /> <min value="0" /> <max value="1" /> </base> <type> <code value="CodeableConcept" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="RouteOfAdministration" /> </extension> <strength value="example" /> <description value="A coded concept describing the route or physiological path of administration of a therapeutic agent into or onto the body of a subject." /> <valueSet value="http://hl7.org/fhir/ValueSet/route-codes" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CE/CNE/CWE" /> </mapping> <mapping> <identity value="rim" /> <map value="CD" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:CodeableConcept rdfs:subClassOf dt:CD" /> </mapping> <mapping> <identity value="v2" /> <map value="RXR-1" /> </mapping> <mapping> <identity value="rim" /> <map value=".routeCode" /> </mapping> </element> <element id="Dosage.route.id"> <path value="Dosage.route.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Dosage.route.extension"> <path value="Dosage.route.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Dosage.route.coding"> <path value="Dosage.route.coding" /> <slicing> <discriminator> <type value="pattern" /> <path value="$this" /> </discriminator> <rules value="open" /> </slicing> <short value="Code defined by a terminology system" /> <definition value="A reference to a code defined by a terminology system." /> <comment value="Das MustSupport gilt nur für die vordefinierten Slices." /> <requirements value="Allows for alternative encodings within a code system, and translations to other code systems." /> <min value="0" /> <max value="*" /> <base> <path value="CodeableConcept.coding" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Coding" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CE/CNE/CWE subset one of the sets of component 1-3 or 4-6" /> </mapping> <mapping> <identity value="rim" /> <map value="CV" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:Coding rdfs:subClassOf dt:CDCoding" /> </mapping> <mapping> <identity value="v2" /> <map value="C*E.1-8, C*E.10-22" /> </mapping> <mapping> <identity value="rim" /> <map value="union(., ./translation)" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding" /> </mapping> </element> <element id="Dosage.route.coding:snomed"> <path value="Dosage.route.coding" /> <sliceName value="snomed" /> <short value="Code defined by a terminology system" /> <definition value="A reference to a code defined by a terminology system." /> <comment value="Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true." /> <requirements value="Allows for alternative encodings within a code system, and translations to other code systems." /> <min value="0" /> <max value="1" /> <base> <path value="CodeableConcept.coding" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Coding" /> </type> <patternCoding> <system value="http://snomed.info/sct" /> </patternCoding> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <binding> <strength value="extensible" /> <valueSet value="https://gematik.de/fhir/terminology/ValueSet/epa-route-of-administration-snomed-ct-vs" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CE/CNE/CWE subset one of the sets of component 1-3 or 4-6" /> </mapping> <mapping> <identity value="rim" /> <map value="CV" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:Coding rdfs:subClassOf dt:CDCoding" /> </mapping> <mapping> <identity value="v2" /> <map value="C*E.1-8, C*E.10-22" /> </mapping> <mapping> <identity value="rim" /> <map value="union(., ./translation)" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding" /> </mapping> </element> <element id="Dosage.route.coding:snomed.id"> <path value="Dosage.route.coding.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Dosage.route.coding:snomed.extension"> <path value="Dosage.route.coding.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Dosage.route.coding:snomed.system"> <path value="Dosage.route.coding.system" /> <short value="Identity of the terminology system" /> <definition value="The identification of the code system that defines the meaning of the symbol in the code." /> <comment value="The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously." /> <requirements value="Need to be unambiguous about the source of the definition of the symbol." /> <min value="1" /> <max value="1" /> <base> <path value="Coding.system" /> <min value="0" /> <max value="1" /> </base> <type> <code value="uri" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="C*E.3" /> </mapping> <mapping> <identity value="rim" /> <map value="./codeSystem" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem" /> </mapping> </element> <element id="Dosage.route.coding:snomed.version"> <path value="Dosage.route.coding.version" /> <short value="Version of the system - if relevant" /> <definition value="The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged." /> <comment value="Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date." /> <min value="1" /> <max value="1" /> <base> <path value="Coding.version" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="C*E.7" /> </mapping> <mapping> <identity value="rim" /> <map value="./codeSystemVersion" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion" /> </mapping> </element> <element id="Dosage.route.coding:snomed.code"> <path value="Dosage.route.coding.code" /> <short value="Symbol in syntax defined by the system" /> <definition value="A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination)." /> <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" /> <requirements value="Need to refer to a particular code in the system." /> <min value="1" /> <max value="1" /> <base> <path value="Coding.code" /> <min value="0" /> <max value="1" /> </base> <type> <code value="code" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="C*E.1" /> </mapping> <mapping> <identity value="rim" /> <map value="./code" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code" /> </mapping> </element> <element id="Dosage.route.coding:snomed.display"> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable"> <valueBoolean value="true" /> </extension> <path value="Dosage.route.coding.display" /> <short value="Representation defined by the system" /> <definition value="A representation of the meaning of the code in the system, following the rules of the system." /> <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" /> <requirements value="Need to be able to carry a human-readable meaning of the code for readers that do not know the system." /> <min value="1" /> <max value="1" /> <base> <path value="Coding.display" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="C*E.2 - but note this is not well followed" /> </mapping> <mapping> <identity value="rim" /> <map value="CV.displayName" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName" /> </mapping> </element> <element id="Dosage.route.coding:snomed.userSelected"> <path value="Dosage.route.coding.userSelected" /> <short value="If this coding was chosen directly by the user" /> <definition value="Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays)." /> <comment value="Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely." /> <requirements value="This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing." /> <min value="0" /> <max value="1" /> <base> <path value="Coding.userSelected" /> <min value="0" /> <max value="1" /> </base> <type> <code value="boolean" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="Sometimes implied by being first" /> </mapping> <mapping> <identity value="rim" /> <map value="CD.codingRationale" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]" /> </mapping> </element> <element id="Dosage.route.coding:edqm"> <path value="Dosage.route.coding" /> <sliceName value="edqm" /> <short value="Code defined by a terminology system" /> <definition value="A reference to a code defined by a terminology system." /> <comment value="Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true." /> <requirements value="Allows for alternative encodings within a code system, and translations to other code systems." /> <min value="0" /> <max value="1" /> <base> <path value="CodeableConcept.coding" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Coding" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <binding> <strength value="required" /> <valueSet value="https://gematik.de/fhir/terminology/ValueSet/epa-medicine-route-of-administration-edqm-vs" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CE/CNE/CWE subset one of the sets of component 1-3 or 4-6" /> </mapping> <mapping> <identity value="rim" /> <map value="CV" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:Coding rdfs:subClassOf dt:CDCoding" /> </mapping> <mapping> <identity value="v2" /> <map value="C*E.1-8, C*E.10-22" /> </mapping> <mapping> <identity value="rim" /> <map value="union(., ./translation)" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding" /> </mapping> </element> <element id="Dosage.route.coding:edqm.id"> <path value="Dosage.route.coding.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Dosage.route.coding:edqm.extension"> <path value="Dosage.route.coding.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Dosage.route.coding:edqm.system"> <path value="Dosage.route.coding.system" /> <short value="Identity of the terminology system" /> <definition value="The identification of the code system that defines the meaning of the symbol in the code." /> <comment value="The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously." /> <requirements value="Need to be unambiguous about the source of the definition of the symbol." /> <min value="1" /> <max value="1" /> <base> <path value="Coding.system" /> <min value="0" /> <max value="1" /> </base> <type> <code value="uri" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="C*E.3" /> </mapping> <mapping> <identity value="rim" /> <map value="./codeSystem" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem" /> </mapping> </element> <element id="Dosage.route.coding:edqm.version"> <path value="Dosage.route.coding.version" /> <short value="Version of the system - if relevant" /> <definition value="The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged." /> <comment value="Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date." /> <min value="0" /> <max value="1" /> <base> <path value="Coding.version" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="C*E.7" /> </mapping> <mapping> <identity value="rim" /> <map value="./codeSystemVersion" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion" /> </mapping> </element> <element id="Dosage.route.coding:edqm.code"> <path value="Dosage.route.coding.code" /> <short value="Symbol in syntax defined by the system" /> <definition value="A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination)." /> <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" /> <requirements value="Need to refer to a particular code in the system." /> <min value="1" /> <max value="1" /> <base> <path value="Coding.code" /> <min value="0" /> <max value="1" /> </base> <type> <code value="code" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="C*E.1" /> </mapping> <mapping> <identity value="rim" /> <map value="./code" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code" /> </mapping> </element> <element id="Dosage.route.coding:edqm.display"> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable"> <valueBoolean value="true" /> </extension> <path value="Dosage.route.coding.display" /> <short value="Representation defined by the system" /> <definition value="A representation of the meaning of the code in the system, following the rules of the system." /> <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" /> <requirements value="Need to be able to carry a human-readable meaning of the code for readers that do not know the system." /> <min value="1" /> <max value="1" /> <base> <path value="Coding.display" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="C*E.2 - but note this is not well followed" /> </mapping> <mapping> <identity value="rim" /> <map value="CV.displayName" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName" /> </mapping> </element> <element id="Dosage.route.coding:edqm.userSelected"> <path value="Dosage.route.coding.userSelected" /> <short value="If this coding was chosen directly by the user" /> <definition value="Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays)." /> <comment value="Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely." /> <requirements value="This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing." /> <min value="0" /> <max value="1" /> <base> <path value="Coding.userSelected" /> <min value="0" /> <max value="1" /> </base> <type> <code value="boolean" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="Sometimes implied by being first" /> </mapping> <mapping> <identity value="rim" /> <map value="CD.codingRationale" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]" /> </mapping> </element> <element id="Dosage.route.text"> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable"> <valueBoolean value="true" /> </extension> <path value="Dosage.route.text" /> <short value="Plain text representation of the concept" /> <definition value="A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user." /> <comment value="Very often the text is the same as a displayName of one of the codings." /> <requirements value="The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source." /> <min value="0" /> <max value="1" /> <base> <path value="CodeableConcept.text" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="C*E.9. But note many systems use C*E.2 for this" /> </mapping> <mapping> <identity value="rim" /> <map value="./originalText[mediaType/code="text/plain"]/data" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText" /> </mapping> </element> <element id="Dosage.method"> <path value="Dosage.method" /> <short value="Technique for administering medication" /> <definition value="Technique for administering medication." /> <comment value="Terminologies used often pre-coordinate this term with the route and or form of administration." /> <requirements value="A coded value indicating the method by which the medication is introduced into or onto the body. Most commonly used for injections. For examples, Slow Push; Deep IV." /> <min value="0" /> <max value="1" /> <base> <path value="Dosage.method" /> <min value="0" /> <max value="1" /> </base> <type> <code value="CodeableConcept" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="MedicationAdministrationMethod" /> </extension> <strength value="example" /> <description value="A coded concept describing the technique by which the medicine is administered." /> <valueSet value="http://hl7.org/fhir/ValueSet/administration-method-codes" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CE/CNE/CWE" /> </mapping> <mapping> <identity value="rim" /> <map value="CD" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:CodeableConcept rdfs:subClassOf dt:CD" /> </mapping> <mapping> <identity value="v2" /> <map value="RXR-4" /> </mapping> <mapping> <identity value="rim" /> <map value=".doseQuantity" /> </mapping> </element> <element id="Dosage.doseAndRate"> <path value="Dosage.doseAndRate" /> <short value="Amount of medication administered" /> <definition value="The amount of medication administered." /> <min value="0" /> <max value="1" /> <base> <path value="Dosage.doseAndRate" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Element" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="TQ1-2" /> </mapping> </element> <element id="Dosage.doseAndRate.id"> <path value="Dosage.doseAndRate.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Dosage.doseAndRate.extension"> <path value="Dosage.doseAndRate.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Dosage.doseAndRate.type"> <path value="Dosage.doseAndRate.type" /> <short value="The kind of dose or rate specified" /> <definition value="The kind of dose or rate specified, for example, ordered or calculated." /> <comment value="Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination." /> <requirements value="If the type is not populated, assume to be "ordered"." /> <min value="0" /> <max value="1" /> <base> <path value="Dosage.doseAndRate.type" /> <min value="0" /> <max value="1" /> </base> <type> <code value="CodeableConcept" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="DoseAndRateType" /> </extension> <strength value="example" /> <description value="The kind of dose or rate specified." /> <valueSet value="http://hl7.org/fhir/ValueSet/dose-rate-type" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CE/CNE/CWE" /> </mapping> <mapping> <identity value="rim" /> <map value="CD" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:CodeableConcept rdfs:subClassOf dt:CD" /> </mapping> <mapping> <identity value="v2" /> <map value="RXO-21; RXE-23" /> </mapping> </element> <element id="Dosage.doseAndRate.dose[x]"> <path value="Dosage.doseAndRate.dose[x]" /> <slicing> <discriminator> <type value="type" /> <path value="$this" /> </discriminator> <ordered value="false" /> <rules value="open" /> </slicing> <short value="Amount of medication per dose" /> <definition value="Hier kann die Dosierung einer Gabe bzw. Einnahme abgebildet werden. Dabei kann es sich um eine definierte Menge für eine Einnahme handeln (z.B. die Einnahme von 5 mg eines Wirkstoffs im Rahmen einer Einnahme) oder um einen definierten Mengenbereich (z.B. die Einnahme von 5 mg bis 10 mg eines Wirkstoffs im Rahmen einer Einnahme)." /> <comment value="Note that this specifies the quantity of the specified medication, not the quantity for each active ingredient(s). Each ingredient amount can be communicated in the Medication resource. For example, if one wants to communicate that a tablet was 375 mg, where the dose was one tablet, you can use the Medication resource to document that the tablet was comprised of 375 mg of drug XYZ. Alternatively if the dose was 375 mg, then you may only need to use the Medication resource to indicate this was a tablet. If the example were an IV such as dopamine and you wanted to communicate that 400mg of dopamine was mixed in 500 ml of some IV solution, then this would all be communicated in the Medication resource. If the administration is not intended to be instantaneous (rate is present or timing has a duration), this can be specified to convey the total amount to be administered over the period of time as indicated by the schedule e.g. 500 ml in dose, with timing used to convey that this should be done over 4 hours." /> <requirements value="The amount of therapeutic or other substance given at one administration event." /> <min value="0" /> <max value="1" /> <base> <path value="Dosage.doseAndRate.dose[x]" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Range" /> </type> <type> <code value="Quantity" /> <profile value="http://hl7.org/fhir/StructureDefinition/SimpleQuantity" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="RXO-2, RXE-3" /> </mapping> <mapping> <identity value="rim" /> <map value=".doseQuantity" /> </mapping> </element> <element id="Dosage.doseAndRate.dose[x]:doseQuantity"> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status"> <valueCode value="normative" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version"> <valueCode value="4.0.0" /> </extension> <path value="Dosage.doseAndRate.dose[x]" /> <sliceName value="doseQuantity" /> <short value="A fixed quantity (no comparator)" /> <definition value="Hier wird die Dosiermenge mittels einer definierten Menge angegeben." /> <comment value="The context of use may frequently define what kind of quantity this is and therefore what kind of units can be used. The context of use may also restrict the values for the comparator." /> <requirements value="The amount of therapeutic or other substance given at one administration event." /> <min value="0" /> <max value="1" /> <base> <path value="Dosage.doseAndRate.dose[x]" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Quantity" /> <profile value="http://hl7.org/fhir/StructureDefinition/SimpleQuantity" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="qty-3" /> <severity value="error" /> <human value="If a code for the unit is present, the system SHALL also be present" /> <expression value="code.empty() or system.exists()" /> <xpath value="not(exists(f:code)) or exists(f:system)" /> <source value="http://hl7.org/fhir/StructureDefinition/Quantity" /> </constraint> <constraint> <key value="sqty-1" /> <severity value="error" /> <human value="The comparator is not used on a SimpleQuantity" /> <expression value="comparator.empty()" /> <xpath value="not(exists(f:comparator))" /> <source value="http://hl7.org/fhir/StructureDefinition/SimpleQuantity" /> </constraint> <mustSupport value="true" /> <isModifier value="false" /> <isSummary value="true" /> <binding> <strength value="preferred" /> <valueSet value="https://fhir.kbv.de/ValueSet/KBV_VS_SFHIR_BMP_DOSIEREINHEIT" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="RXO-2, RXE-3" /> </mapping> <mapping> <identity value="rim" /> <map value=".doseQuantity" /> </mapping> <mapping> <identity value="v2" /> <map value="SN (see also Range) or CQ" /> </mapping> <mapping> <identity value="rim" /> <map value="PQ, IVL<PQ>, MO, CO, depending on the values" /> </mapping> </element> <element id="Dosage.doseAndRate.dose[x]:doseQuantity.id"> <path value="Dosage.doseAndRate.dose[x].id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Dosage.doseAndRate.dose[x]:doseQuantity.extension"> <path value="Dosage.doseAndRate.dose[x].extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Dosage.doseAndRate.dose[x]:doseQuantity.value"> <path value="Dosage.doseAndRate.dose[x].value" /> <short value="Numerical value (with implicit precision)" /> <definition value="Hier wird die Menge des Arzneimittels angegeben, die verabreicht/eingenommen wird." /> <comment value="The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books)." /> <requirements value="Precision is handled implicitly in almost all cases of measurement." /> <min value="1" /> <max value="1" /> <base> <path value="Quantity.value" /> <min value="0" /> <max value="1" /> </base> <type> <code value="decimal" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="SN.2 / CQ - N/A" /> </mapping> <mapping> <identity value="rim" /> <map value="PQ.value, CO.value, MO.value, IVL.high or IVL.low depending on the value" /> </mapping> </element> <element id="Dosage.doseAndRate.dose[x]:doseQuantity.comparator"> <path value="Dosage.doseAndRate.dose[x].comparator" /> <short value="< | <= | >= | > - how to understand the value" /> <definition value="Not allowed to be used in this context" /> <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" /> <requirements value="Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology." /> <min value="0" /> <max value="0" /> <base> <path value="Quantity.comparator" /> <min value="0" /> <max value="1" /> </base> <type> <code value="code" /> </type> <meaningWhenMissing value="If there is no comparator, then there is no modification of the value" /> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isModifier value="true" /> <isModifierReason value="This is labeled as "Is Modifier" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value" /> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="QuantityComparator" /> </extension> <strength value="required" /> <description value="How the Quantity should be understood and represented." /> <valueSet value="http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="SN.1 / CQ.1" /> </mapping> <mapping> <identity value="rim" /> <map value="IVL properties" /> </mapping> </element> <element id="Dosage.doseAndRate.dose[x]:doseQuantity.unit"> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable"> <valueBoolean value="true" /> </extension> <path value="Dosage.doseAndRate.dose[x].unit" /> <short value="Unit representation" /> <definition value="A human-readable form of the unit." /> <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" /> <requirements value="There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms." /> <min value="1" /> <max value="1" /> <base> <path value="Quantity.unit" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="(see OBX.6 etc.) / CQ.2" /> </mapping> <mapping> <identity value="rim" /> <map value="PQ.unit" /> </mapping> </element> <element id="Dosage.doseAndRate.dose[x]:doseQuantity.system"> <path value="Dosage.doseAndRate.dose[x].system" /> <short value="System that defines coded unit form" /> <definition value="The identification of the system that provides the coded form of the unit." /> <comment value="see http://en.wikipedia.org/wiki/Uniform_resource_identifier" /> <requirements value="Need to know the system that defines the coded form of the unit." /> <min value="1" /> <max value="1" /> <base> <path value="Quantity.system" /> <min value="0" /> <max value="1" /> </base> <type> <code value="uri" /> </type> <condition value="ele-1" /> <condition value="qty-3" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="(see OBX.6 etc.) / CQ.2" /> </mapping> <mapping> <identity value="rim" /> <map value="CO.codeSystem, PQ.translation.codeSystem" /> </mapping> </element> <element id="Dosage.doseAndRate.dose[x]:doseQuantity.code"> <path value="Dosage.doseAndRate.dose[x].code" /> <short value="Coded form of the unit" /> <definition value="Hier wird die Dosiereinheit als Code angegeben. Hierbei sollte nach Möglichkeit folgendes ValueSet verwendet werden: https://fhir.kbv.de/ValueSet/KBV_VS_SFHIR_BMP_DOSIEREINHEIT." /> <comment value="The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system." /> <requirements value="Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest." /> <min value="1" /> <max value="1" /> <base> <path value="Quantity.code" /> <min value="0" /> <max value="1" /> </base> <type> <code value="code" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="(see OBX.6 etc.) / CQ.2" /> </mapping> <mapping> <identity value="rim" /> <map value="PQ.code, MO.currency, PQ.translation.code" /> </mapping> </element> <element id="Dosage.doseAndRate.dose[x]:doseRange"> <path value="Dosage.doseAndRate.dose[x]" /> <sliceName value="doseRange" /> <short value="Amount of medication per dose" /> <definition value="Hier wird die Dosiermenge mittels eines definierten Mengenbereichs angegeben." /> <comment value="Note that this specifies the quantity of the specified medication, not the quantity for each active ingredient(s). Each ingredient amount can be communicated in the Medication resource. For example, if one wants to communicate that a tablet was 375 mg, where the dose was one tablet, you can use the Medication resource to document that the tablet was comprised of 375 mg of drug XYZ. Alternatively if the dose was 375 mg, then you may only need to use the Medication resource to indicate this was a tablet. If the example were an IV such as dopamine and you wanted to communicate that 400mg of dopamine was mixed in 500 ml of some IV solution, then this would all be communicated in the Medication resource. If the administration is not intended to be instantaneous (rate is present or timing has a duration), this can be specified to convey the total amount to be administered over the period of time as indicated by the schedule e.g. 500 ml in dose, with timing used to convey that this should be done over 4 hours." /> <requirements value="The amount of therapeutic or other substance given at one administration event." /> <min value="0" /> <max value="1" /> <base> <path value="Dosage.doseAndRate.dose[x]" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Range" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="RXO-2, RXE-3" /> </mapping> <mapping> <identity value="rim" /> <map value=".doseQuantity" /> </mapping> </element> <element id="Dosage.doseAndRate.dose[x]:doseRange.id"> <path value="Dosage.doseAndRate.dose[x].id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Dosage.doseAndRate.dose[x]:doseRange.extension"> <path value="Dosage.doseAndRate.dose[x].extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Dosage.doseAndRate.dose[x]:doseRange.low"> <path value="Dosage.doseAndRate.dose[x].low" /> <short value="Low limit" /> <definition value="Hier wird die untere Grenze des definierten Mengenbereichs angegeben." /> <comment value="If the low element is missing, the low boundary is not known." /> <min value="0" /> <max value="1" /> <base> <path value="Range.low" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Quantity" /> <profile value="http://hl7.org/fhir/StructureDefinition/SimpleQuantity" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="qty-3" /> <severity value="error" /> <human value="If a code for the unit is present, the system SHALL also be present" /> <expression value="code.empty() or system.exists()" /> <xpath value="not(exists(f:code)) or exists(f:system)" /> <source value="http://hl7.org/fhir/StructureDefinition/Quantity" /> </constraint> <constraint> <key value="sqty-1" /> <severity value="error" /> <human value="The comparator is not used on a SimpleQuantity" /> <expression value="comparator.empty()" /> <xpath value="not(exists(f:comparator))" /> <source value="http://hl7.org/fhir/StructureDefinition/SimpleQuantity" /> </constraint> <mustSupport value="true" /> <isModifier value="false" /> <isSummary value="true" /> <binding> <strength value="preferred" /> <valueSet value="https://fhir.kbv.de/ValueSet/KBV_VS_SFHIR_BMP_DOSIEREINHEIT" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="SN (see also Range) or CQ" /> </mapping> <mapping> <identity value="rim" /> <map value="PQ, IVL<PQ>, MO, CO, depending on the values" /> </mapping> <mapping> <identity value="v2" /> <map value="NR.1" /> </mapping> <mapping> <identity value="rim" /> <map value="./low" /> </mapping> </element> <element id="Dosage.doseAndRate.dose[x]:doseRange.low.id"> <path value="Dosage.doseAndRate.dose[x].low.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Dosage.doseAndRate.dose[x]:doseRange.low.extension"> <path value="Dosage.doseAndRate.dose[x].low.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Dosage.doseAndRate.dose[x]:doseRange.low.value"> <path value="Dosage.doseAndRate.dose[x].low.value" /> <short value="Numerical value (with implicit precision)" /> <definition value="Hier wird die Menge des Arzneimittels angegeben, die verabreicht/eingenommen wird." /> <comment value="The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books)." /> <requirements value="Precision is handled implicitly in almost all cases of measurement." /> <min value="1" /> <max value="1" /> <base> <path value="Quantity.value" /> <min value="0" /> <max value="1" /> </base> <type> <code value="decimal" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="SN.2 / CQ - N/A" /> </mapping> <mapping> <identity value="rim" /> <map value="PQ.value, CO.value, MO.value, IVL.high or IVL.low depending on the value" /> </mapping> </element> <element id="Dosage.doseAndRate.dose[x]:doseRange.low.comparator"> <path value="Dosage.doseAndRate.dose[x].low.comparator" /> <short value="< | <= | >= | > - how to understand the value" /> <definition value="Not allowed to be used in this context" /> <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" /> <requirements value="Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology." /> <min value="0" /> <max value="0" /> <base> <path value="Quantity.comparator" /> <min value="0" /> <max value="1" /> </base> <type> <code value="code" /> </type> <meaningWhenMissing value="If there is no comparator, then there is no modification of the value" /> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isModifier value="true" /> <isModifierReason value="This is labeled as "Is Modifier" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value" /> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="QuantityComparator" /> </extension> <strength value="required" /> <description value="How the Quantity should be understood and represented." /> <valueSet value="http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="SN.1 / CQ.1" /> </mapping> <mapping> <identity value="rim" /> <map value="IVL properties" /> </mapping> </element> <element id="Dosage.doseAndRate.dose[x]:doseRange.low.unit"> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable"> <valueBoolean value="true" /> </extension> <path value="Dosage.doseAndRate.dose[x].low.unit" /> <short value="Unit representation" /> <definition value="A human-readable form of the unit." /> <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" /> <requirements value="There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms." /> <min value="1" /> <max value="1" /> <base> <path value="Quantity.unit" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="(see OBX.6 etc.) / CQ.2" /> </mapping> <mapping> <identity value="rim" /> <map value="PQ.unit" /> </mapping> </element> <element id="Dosage.doseAndRate.dose[x]:doseRange.low.system"> <path value="Dosage.doseAndRate.dose[x].low.system" /> <short value="System that defines coded unit form" /> <definition value="The identification of the system that provides the coded form of the unit." /> <comment value="see http://en.wikipedia.org/wiki/Uniform_resource_identifier" /> <requirements value="Need to know the system that defines the coded form of the unit." /> <min value="1" /> <max value="1" /> <base> <path value="Quantity.system" /> <min value="0" /> <max value="1" /> </base> <type> <code value="uri" /> </type> <condition value="ele-1" /> <condition value="qty-3" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="(see OBX.6 etc.) / CQ.2" /> </mapping> <mapping> <identity value="rim" /> <map value="CO.codeSystem, PQ.translation.codeSystem" /> </mapping> </element> <element id="Dosage.doseAndRate.dose[x]:doseRange.low.code"> <path value="Dosage.doseAndRate.dose[x].low.code" /> <short value="Coded form of the unit" /> <definition value="Hier wird die Dosiereinheit als Code angegeben. Hierbei sollte nach Möglichkeit folgendes ValueSet verwendet werden: https://fhir.kbv.de/ValueSet/KBV_VS_SFHIR_BMP_DOSIEREINHEIT." /> <comment value="The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system." /> <requirements value="Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest." /> <min value="1" /> <max value="1" /> <base> <path value="Quantity.code" /> <min value="0" /> <max value="1" /> </base> <type> <code value="code" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="(see OBX.6 etc.) / CQ.2" /> </mapping> <mapping> <identity value="rim" /> <map value="PQ.code, MO.currency, PQ.translation.code" /> </mapping> </element> <element id="Dosage.doseAndRate.dose[x]:doseRange.high"> <path value="Dosage.doseAndRate.dose[x].high" /> <short value="High limit" /> <definition value="Hier wird die obere Grenze des definierten Mengenbereichs angegeben." /> <comment value="If the high element is missing, the high boundary is not known." /> <min value="0" /> <max value="1" /> <base> <path value="Range.high" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Quantity" /> <profile value="http://hl7.org/fhir/StructureDefinition/SimpleQuantity" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="qty-3" /> <severity value="error" /> <human value="If a code for the unit is present, the system SHALL also be present" /> <expression value="code.empty() or system.exists()" /> <xpath value="not(exists(f:code)) or exists(f:system)" /> <source value="http://hl7.org/fhir/StructureDefinition/Quantity" /> </constraint> <constraint> <key value="sqty-1" /> <severity value="error" /> <human value="The comparator is not used on a SimpleQuantity" /> <expression value="comparator.empty()" /> <xpath value="not(exists(f:comparator))" /> <source value="http://hl7.org/fhir/StructureDefinition/SimpleQuantity" /> </constraint> <mustSupport value="true" /> <isModifier value="false" /> <isSummary value="true" /> <binding> <strength value="preferred" /> <valueSet value="https://fhir.kbv.de/ValueSet/KBV_VS_SFHIR_BMP_DOSIEREINHEIT" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="SN (see also Range) or CQ" /> </mapping> <mapping> <identity value="rim" /> <map value="PQ, IVL<PQ>, MO, CO, depending on the values" /> </mapping> <mapping> <identity value="v2" /> <map value="NR.2" /> </mapping> <mapping> <identity value="rim" /> <map value="./high" /> </mapping> </element> <element id="Dosage.doseAndRate.dose[x]:doseRange.high.id"> <path value="Dosage.doseAndRate.dose[x].high.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Dosage.doseAndRate.dose[x]:doseRange.high.extension"> <path value="Dosage.doseAndRate.dose[x].high.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Dosage.doseAndRate.dose[x]:doseRange.high.value"> <path value="Dosage.doseAndRate.dose[x].high.value" /> <short value="Numerical value (with implicit precision)" /> <definition value="Hier wird die Menge des Arzneimittels angegeben, die verabreicht/eingenommen wird." /> <comment value="The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books)." /> <requirements value="Precision is handled implicitly in almost all cases of measurement." /> <min value="1" /> <max value="1" /> <base> <path value="Quantity.value" /> <min value="0" /> <max value="1" /> </base> <type> <code value="decimal" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="SN.2 / CQ - N/A" /> </mapping> <mapping> <identity value="rim" /> <map value="PQ.value, CO.value, MO.value, IVL.high or IVL.low depending on the value" /> </mapping> </element> <element id="Dosage.doseAndRate.dose[x]:doseRange.high.comparator"> <path value="Dosage.doseAndRate.dose[x].high.comparator" /> <short value="< | <= | >= | > - how to understand the value" /> <definition value="Not allowed to be used in this context" /> <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" /> <requirements value="Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology." /> <min value="0" /> <max value="0" /> <base> <path value="Quantity.comparator" /> <min value="0" /> <max value="1" /> </base> <type> <code value="code" /> </type> <meaningWhenMissing value="If there is no comparator, then there is no modification of the value" /> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isModifier value="true" /> <isModifierReason value="This is labeled as "Is Modifier" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value" /> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="QuantityComparator" /> </extension> <strength value="required" /> <description value="How the Quantity should be understood and represented." /> <valueSet value="http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="SN.1 / CQ.1" /> </mapping> <mapping> <identity value="rim" /> <map value="IVL properties" /> </mapping> </element> <element id="Dosage.doseAndRate.dose[x]:doseRange.high.unit"> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable"> <valueBoolean value="true" /> </extension> <path value="Dosage.doseAndRate.dose[x].high.unit" /> <short value="Unit representation" /> <definition value="A human-readable form of the unit." /> <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" /> <requirements value="There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms." /> <min value="1" /> <max value="1" /> <base> <path value="Quantity.unit" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="(see OBX.6 etc.) / CQ.2" /> </mapping> <mapping> <identity value="rim" /> <map value="PQ.unit" /> </mapping> </element> <element id="Dosage.doseAndRate.dose[x]:doseRange.high.system"> <path value="Dosage.doseAndRate.dose[x].high.system" /> <short value="System that defines coded unit form" /> <definition value="The identification of the system that provides the coded form of the unit." /> <comment value="see http://en.wikipedia.org/wiki/Uniform_resource_identifier" /> <requirements value="Need to know the system that defines the coded form of the unit." /> <min value="1" /> <max value="1" /> <base> <path value="Quantity.system" /> <min value="0" /> <max value="1" /> </base> <type> <code value="uri" /> </type> <condition value="ele-1" /> <condition value="qty-3" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="(see OBX.6 etc.) / CQ.2" /> </mapping> <mapping> <identity value="rim" /> <map value="CO.codeSystem, PQ.translation.codeSystem" /> </mapping> </element> <element id="Dosage.doseAndRate.dose[x]:doseRange.high.code"> <path value="Dosage.doseAndRate.dose[x].high.code" /> <short value="Coded form of the unit" /> <definition value="Hier wird die Dosiereinheit als Code angegeben. Hierbei sollte nach Möglichkeit folgendes ValueSet verwendet werden: https://fhir.kbv.de/ValueSet/KBV_VS_SFHIR_BMP_DOSIEREINHEIT." /> <comment value="The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system." /> <requirements value="Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest." /> <min value="1" /> <max value="1" /> <base> <path value="Quantity.code" /> <min value="0" /> <max value="1" /> </base> <type> <code value="code" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="(see OBX.6 etc.) / CQ.2" /> </mapping> <mapping> <identity value="rim" /> <map value="PQ.code, MO.currency, PQ.translation.code" /> </mapping> </element> <element id="Dosage.doseAndRate.rate[x]"> <path value="Dosage.doseAndRate.rate[x]" /> <slicing> <discriminator> <type value="type" /> <path value="$this" /> </discriminator> <ordered value="false" /> <rules value="open" /> </slicing> <short value="Amount of medication per unit of time" /> <definition value="Hier kann die Dosierung einer Rate über einen bestimmten Zeitraum abgebildet werden. Ein Beispiel dafür wäre die Rate einer Infusionslösung. Dabei kann entweder eine konkrete Verabreichungsgeschwindigkeit (z.B. eine Infusionslösung, welche mit 50 ml/h oder 100 mg/h verabreicht wird) oder ein Bereich für eine Verabreichungsgeschwindigkeit definiert werden (z.B. die Gabe einer Infusionslösung, welche mit 100 ml/h bis 150 mg/h verabreicht wird)." /> <comment value="It is possible to supply both a rate and a doseQuantity to provide full details about how the medication is to be administered and supplied. If the rate is intended to change over time, depending on local rules/regulations, each change should be captured as a new version of the MedicationRequest with an updated rate, or captured with a new MedicationRequest with the new rate. It is possible to specify a rate over time (for example, 100 ml/hour) using either the rateRatio and rateQuantity. The rateQuantity approach requires systems to have the capability to parse UCUM grammer where ml/hour is included rather than a specific ratio where the time is specified as the denominator. Where a rate such as 500ml over 2 hours is specified, the use of rateRatio may be more semantically correct than specifying using a rateQuantity of 250 mg/hour." /> <requirements value="Identifies the speed with which the medication was or will be introduced into the patient. Typically the rate for an infusion e.g. 100 ml per 1 hour or 100 ml/hr. May also be expressed as a rate per unit of time e.g. 500 ml per 2 hours. Other examples: 200 mcg/min or 200 mcg/1 minute; 1 liter/8 hours. Sometimes, a rate can imply duration when expressed as total volume / duration (e.g. 500mL/2 hours implies a duration of 2 hours). However, when rate doesn't imply duration (e.g. 250mL/hour), then the timing.repeat.duration is needed to convey the infuse over time period." /> <min value="0" /> <max value="1" /> <base> <path value="Dosage.doseAndRate.rate[x]" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Ratio" /> </type> <type> <code value="Range" /> </type> <type> <code value="Quantity" /> <profile value="http://hl7.org/fhir/StructureDefinition/SimpleQuantity" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="RXE22, RXE23, RXE-24" /> </mapping> <mapping> <identity value="rim" /> <map value=".rateQuantity" /> </mapping> </element> <element id="Dosage.doseAndRate.rate[x]:rateRange"> <path value="Dosage.doseAndRate.rate[x]" /> <sliceName value="rateRange" /> <short value="Amount of medication per unit of time" /> <definition value="Hier kann der Bereich für eine Rate/Verabreichungsgeschwindigkeit angegeben werden, mit welcher ein Arzneimittel verabreicht wird. **Beispiel:** * Eine Infusionslösung kann mit einer Geschwindigkeit von 100 ml/h (Untergrenze) bis 120 ml/h (Obergrenze) verabreicht werden." /> <comment value="It is possible to supply both a rate and a doseQuantity to provide full details about how the medication is to be administered and supplied. If the rate is intended to change over time, depending on local rules/regulations, each change should be captured as a new version of the MedicationRequest with an updated rate, or captured with a new MedicationRequest with the new rate. It is possible to specify a rate over time (for example, 100 ml/hour) using either the rateRatio and rateQuantity. The rateQuantity approach requires systems to have the capability to parse UCUM grammer where ml/hour is included rather than a specific ratio where the time is specified as the denominator. Where a rate such as 500ml over 2 hours is specified, the use of rateRatio may be more semantically correct than specifying using a rateQuantity of 250 mg/hour." /> <requirements value="Identifies the speed with which the medication was or will be introduced into the patient. Typically the rate for an infusion e.g. 100 ml per 1 hour or 100 ml/hr. May also be expressed as a rate per unit of time e.g. 500 ml per 2 hours. Other examples: 200 mcg/min or 200 mcg/1 minute; 1 liter/8 hours. Sometimes, a rate can imply duration when expressed as total volume / duration (e.g. 500mL/2 hours implies a duration of 2 hours). However, when rate doesn't imply duration (e.g. 250mL/hour), then the timing.repeat.duration is needed to convey the infuse over time period." /> <min value="0" /> <max value="1" /> <base> <path value="Dosage.doseAndRate.rate[x]" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Range" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="RXE22, RXE23, RXE-24" /> </mapping> <mapping> <identity value="rim" /> <map value=".rateQuantity" /> </mapping> </element> <element id="Dosage.doseAndRate.rate[x]:rateRange.id"> <path value="Dosage.doseAndRate.rate[x].id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Dosage.doseAndRate.rate[x]:rateRange.extension"> <path value="Dosage.doseAndRate.rate[x].extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Dosage.doseAndRate.rate[x]:rateRange.low"> <path value="Dosage.doseAndRate.rate[x].low" /> <short value="Low limit" /> <definition value="Hier wird die untere Grenze des definierten Mengenbereichs angegeben." /> <comment value="If the low element is missing, the low boundary is not known." /> <min value="0" /> <max value="1" /> <base> <path value="Range.low" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Quantity" /> <profile value="http://hl7.org/fhir/StructureDefinition/SimpleQuantity" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="qty-3" /> <severity value="error" /> <human value="If a code for the unit is present, the system SHALL also be present" /> <expression value="code.empty() or system.exists()" /> <xpath value="not(exists(f:code)) or exists(f:system)" /> <source value="http://hl7.org/fhir/StructureDefinition/Quantity" /> </constraint> <constraint> <key value="sqty-1" /> <severity value="error" /> <human value="The comparator is not used on a SimpleQuantity" /> <expression value="comparator.empty()" /> <xpath value="not(exists(f:comparator))" /> <source value="http://hl7.org/fhir/StructureDefinition/SimpleQuantity" /> </constraint> <mustSupport value="true" /> <isModifier value="false" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="SN (see also Range) or CQ" /> </mapping> <mapping> <identity value="rim" /> <map value="PQ, IVL<PQ>, MO, CO, depending on the values" /> </mapping> <mapping> <identity value="v2" /> <map value="NR.1" /> </mapping> <mapping> <identity value="rim" /> <map value="./low" /> </mapping> </element> <element id="Dosage.doseAndRate.rate[x]:rateRange.low.id"> <path value="Dosage.doseAndRate.rate[x].low.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Dosage.doseAndRate.rate[x]:rateRange.low.extension"> <path value="Dosage.doseAndRate.rate[x].low.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Dosage.doseAndRate.rate[x]:rateRange.low.value"> <path value="Dosage.doseAndRate.rate[x].low.value" /> <short value="Numerical value (with implicit precision)" /> <definition value="Hier wird die Menge angegeben, die über einen bestimmten Zeitraum verabreicht wird." /> <comment value="The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books)." /> <requirements value="Precision is handled implicitly in almost all cases of measurement." /> <min value="1" /> <max value="1" /> <base> <path value="Quantity.value" /> <min value="0" /> <max value="1" /> </base> <type> <code value="decimal" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="SN.2 / CQ - N/A" /> </mapping> <mapping> <identity value="rim" /> <map value="PQ.value, CO.value, MO.value, IVL.high or IVL.low depending on the value" /> </mapping> </element> <element id="Dosage.doseAndRate.rate[x]:rateRange.low.comparator"> <path value="Dosage.doseAndRate.rate[x].low.comparator" /> <short value="< | <= | >= | > - how to understand the value" /> <definition value="Not allowed to be used in this context" /> <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" /> <requirements value="Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology." /> <min value="0" /> <max value="0" /> <base> <path value="Quantity.comparator" /> <min value="0" /> <max value="1" /> </base> <type> <code value="code" /> </type> <meaningWhenMissing value="If there is no comparator, then there is no modification of the value" /> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isModifier value="true" /> <isModifierReason value="This is labeled as "Is Modifier" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value" /> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="QuantityComparator" /> </extension> <strength value="required" /> <description value="How the Quantity should be understood and represented." /> <valueSet value="http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="SN.1 / CQ.1" /> </mapping> <mapping> <identity value="rim" /> <map value="IVL properties" /> </mapping> </element> <element id="Dosage.doseAndRate.rate[x]:rateRange.low.unit"> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable"> <valueBoolean value="true" /> </extension> <path value="Dosage.doseAndRate.rate[x].low.unit" /> <short value="Unit representation" /> <definition value="A human-readable form of the unit." /> <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" /> <requirements value="There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms." /> <min value="1" /> <max value="1" /> <base> <path value="Quantity.unit" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="(see OBX.6 etc.) / CQ.2" /> </mapping> <mapping> <identity value="rim" /> <map value="PQ.unit" /> </mapping> </element> <element id="Dosage.doseAndRate.rate[x]:rateRange.low.system"> <path value="Dosage.doseAndRate.rate[x].low.system" /> <short value="System that defines coded unit form" /> <definition value="The identification of the system that provides the coded form of the unit." /> <comment value="see http://en.wikipedia.org/wiki/Uniform_resource_identifier" /> <requirements value="Need to know the system that defines the coded form of the unit." /> <min value="1" /> <max value="1" /> <base> <path value="Quantity.system" /> <min value="0" /> <max value="1" /> </base> <type> <code value="uri" /> </type> <condition value="ele-1" /> <condition value="qty-3" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="(see OBX.6 etc.) / CQ.2" /> </mapping> <mapping> <identity value="rim" /> <map value="CO.codeSystem, PQ.translation.codeSystem" /> </mapping> </element> <element id="Dosage.doseAndRate.rate[x]:rateRange.low.code"> <path value="Dosage.doseAndRate.rate[x].low.code" /> <short value="Coded form of the unit" /> <definition value="Hier wird die Einheit der Rate/Verabreichungsgeschwingigkeit als Code angegeben." /> <comment value="The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system." /> <requirements value="Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest." /> <min value="1" /> <max value="1" /> <base> <path value="Quantity.code" /> <min value="0" /> <max value="1" /> </base> <type> <code value="code" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="(see OBX.6 etc.) / CQ.2" /> </mapping> <mapping> <identity value="rim" /> <map value="PQ.code, MO.currency, PQ.translation.code" /> </mapping> </element> <element id="Dosage.doseAndRate.rate[x]:rateRange.high"> <path value="Dosage.doseAndRate.rate[x].high" /> <short value="High limit" /> <definition value="Hier wird die obere Grenze des definierten Mengenbereichs angegeben." /> <comment value="If the high element is missing, the high boundary is not known." /> <min value="0" /> <max value="1" /> <base> <path value="Range.high" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Quantity" /> <profile value="http://hl7.org/fhir/StructureDefinition/SimpleQuantity" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="qty-3" /> <severity value="error" /> <human value="If a code for the unit is present, the system SHALL also be present" /> <expression value="code.empty() or system.exists()" /> <xpath value="not(exists(f:code)) or exists(f:system)" /> <source value="http://hl7.org/fhir/StructureDefinition/Quantity" /> </constraint> <constraint> <key value="sqty-1" /> <severity value="error" /> <human value="The comparator is not used on a SimpleQuantity" /> <expression value="comparator.empty()" /> <xpath value="not(exists(f:comparator))" /> <source value="http://hl7.org/fhir/StructureDefinition/SimpleQuantity" /> </constraint> <mustSupport value="true" /> <isModifier value="false" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="SN (see also Range) or CQ" /> </mapping> <mapping> <identity value="rim" /> <map value="PQ, IVL<PQ>, MO, CO, depending on the values" /> </mapping> <mapping> <identity value="v2" /> <map value="NR.2" /> </mapping> <mapping> <identity value="rim" /> <map value="./high" /> </mapping> </element> <element id="Dosage.doseAndRate.rate[x]:rateRange.high.id"> <path value="Dosage.doseAndRate.rate[x].high.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Dosage.doseAndRate.rate[x]:rateRange.high.extension"> <path value="Dosage.doseAndRate.rate[x].high.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Dosage.doseAndRate.rate[x]:rateRange.high.value"> <path value="Dosage.doseAndRate.rate[x].high.value" /> <short value="Numerical value (with implicit precision)" /> <definition value="Hier wird die Menge angegeben, die über einen bestimmten Zeitraum verabreicht wird." /> <comment value="The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books)." /> <requirements value="Precision is handled implicitly in almost all cases of measurement." /> <min value="1" /> <max value="1" /> <base> <path value="Quantity.value" /> <min value="0" /> <max value="1" /> </base> <type> <code value="decimal" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="SN.2 / CQ - N/A" /> </mapping> <mapping> <identity value="rim" /> <map value="PQ.value, CO.value, MO.value, IVL.high or IVL.low depending on the value" /> </mapping> </element> <element id="Dosage.doseAndRate.rate[x]:rateRange.high.comparator"> <path value="Dosage.doseAndRate.rate[x].high.comparator" /> <short value="< | <= | >= | > - how to understand the value" /> <definition value="Not allowed to be used in this context" /> <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" /> <requirements value="Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology." /> <min value="0" /> <max value="0" /> <base> <path value="Quantity.comparator" /> <min value="0" /> <max value="1" /> </base> <type> <code value="code" /> </type> <meaningWhenMissing value="If there is no comparator, then there is no modification of the value" /> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isModifier value="true" /> <isModifierReason value="This is labeled as "Is Modifier" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value" /> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="QuantityComparator" /> </extension> <strength value="required" /> <description value="How the Quantity should be understood and represented." /> <valueSet value="http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="SN.1 / CQ.1" /> </mapping> <mapping> <identity value="rim" /> <map value="IVL properties" /> </mapping> </element> <element id="Dosage.doseAndRate.rate[x]:rateRange.high.unit"> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable"> <valueBoolean value="true" /> </extension> <path value="Dosage.doseAndRate.rate[x].high.unit" /> <short value="Unit representation" /> <definition value="A human-readable form of the unit." /> <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" /> <requirements value="There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms." /> <min value="1" /> <max value="1" /> <base> <path value="Quantity.unit" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="(see OBX.6 etc.) / CQ.2" /> </mapping> <mapping> <identity value="rim" /> <map value="PQ.unit" /> </mapping> </element> <element id="Dosage.doseAndRate.rate[x]:rateRange.high.system"> <path value="Dosage.doseAndRate.rate[x].high.system" /> <short value="System that defines coded unit form" /> <definition value="The identification of the system that provides the coded form of the unit." /> <comment value="see http://en.wikipedia.org/wiki/Uniform_resource_identifier" /> <requirements value="Need to know the system that defines the coded form of the unit." /> <min value="1" /> <max value="1" /> <base> <path value="Quantity.system" /> <min value="0" /> <max value="1" /> </base> <type> <code value="uri" /> </type> <condition value="ele-1" /> <condition value="qty-3" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="(see OBX.6 etc.) / CQ.2" /> </mapping> <mapping> <identity value="rim" /> <map value="CO.codeSystem, PQ.translation.codeSystem" /> </mapping> </element> <element id="Dosage.doseAndRate.rate[x]:rateRange.high.code"> <path value="Dosage.doseAndRate.rate[x].high.code" /> <short value="Coded form of the unit" /> <definition value="Hier wird die Einheit der Rate/Verabreichungsgeschwingigkeit als Code angegeben." /> <comment value="The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system." /> <requirements value="Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest." /> <min value="1" /> <max value="1" /> <base> <path value="Quantity.code" /> <min value="0" /> <max value="1" /> </base> <type> <code value="code" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="(see OBX.6 etc.) / CQ.2" /> </mapping> <mapping> <identity value="rim" /> <map value="PQ.code, MO.currency, PQ.translation.code" /> </mapping> </element> <element id="Dosage.doseAndRate.rate[x]:rateQuantity"> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status"> <valueCode value="normative" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version"> <valueCode value="4.0.0" /> </extension> <path value="Dosage.doseAndRate.rate[x]" /> <sliceName value="rateQuantity" /> <short value="A fixed quantity (no comparator)" /> <definition value="Hier wird die Rate/Verabreichungsgeschwindigkeit in Form einer festen Angabe abgebildet. Dabei wird die Geschwindigkeit bzw. Flussrate, mit der das Arzneimittel verabreicht wird, mit Hilfe einer kombinierten Einheit abgebildet (z.B. ml/h). **Beispiele für eine Flussrate mit einer kombinierten Einheit:** * 1 Milliliter pro Stunde (1 ml/h) * 1 Milligramm pro Stunde (1 mg/h)" /> <comment value="The context of use may frequently define what kind of quantity this is and therefore what kind of units can be used. The context of use may also restrict the values for the comparator." /> <requirements value="Identifies the speed with which the medication was or will be introduced into the patient. Typically the rate for an infusion e.g. 100 ml per 1 hour or 100 ml/hr. May also be expressed as a rate per unit of time e.g. 500 ml per 2 hours. Other examples: 200 mcg/min or 200 mcg/1 minute; 1 liter/8 hours. Sometimes, a rate can imply duration when expressed as total volume / duration (e.g. 500mL/2 hours implies a duration of 2 hours). However, when rate doesn't imply duration (e.g. 250mL/hour), then the timing.repeat.duration is needed to convey the infuse over time period." /> <min value="0" /> <max value="1" /> <base> <path value="Dosage.doseAndRate.rate[x]" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Quantity" /> <profile value="http://hl7.org/fhir/StructureDefinition/SimpleQuantity" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="qty-3" /> <severity value="error" /> <human value="If a code for the unit is present, the system SHALL also be present" /> <expression value="code.empty() or system.exists()" /> <xpath value="not(exists(f:code)) or exists(f:system)" /> <source value="http://hl7.org/fhir/StructureDefinition/Quantity" /> </constraint> <constraint> <key value="sqty-1" /> <severity value="error" /> <human value="The comparator is not used on a SimpleQuantity" /> <expression value="comparator.empty()" /> <xpath value="not(exists(f:comparator))" /> <source value="http://hl7.org/fhir/StructureDefinition/SimpleQuantity" /> </constraint> <mustSupport value="true" /> <isModifier value="false" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="RXE22, RXE23, RXE-24" /> </mapping> <mapping> <identity value="rim" /> <map value=".rateQuantity" /> </mapping> <mapping> <identity value="v2" /> <map value="SN (see also Range) or CQ" /> </mapping> <mapping> <identity value="rim" /> <map value="PQ, IVL<PQ>, MO, CO, depending on the values" /> </mapping> </element> <element id="Dosage.doseAndRate.rate[x]:rateQuantity.id"> <path value="Dosage.doseAndRate.rate[x].id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Dosage.doseAndRate.rate[x]:rateQuantity.extension"> <path value="Dosage.doseAndRate.rate[x].extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Dosage.doseAndRate.rate[x]:rateQuantity.value"> <path value="Dosage.doseAndRate.rate[x].value" /> <short value="Numerical value (with implicit precision)" /> <definition value="Hier wird die Menge angegeben, die über einen bestimmten Zeitraum verabreicht wird." /> <comment value="The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books)." /> <requirements value="Precision is handled implicitly in almost all cases of measurement." /> <min value="1" /> <max value="1" /> <base> <path value="Quantity.value" /> <min value="0" /> <max value="1" /> </base> <type> <code value="decimal" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="SN.2 / CQ - N/A" /> </mapping> <mapping> <identity value="rim" /> <map value="PQ.value, CO.value, MO.value, IVL.high or IVL.low depending on the value" /> </mapping> </element> <element id="Dosage.doseAndRate.rate[x]:rateQuantity.comparator"> <path value="Dosage.doseAndRate.rate[x].comparator" /> <short value="< | <= | >= | > - how to understand the value" /> <definition value="Not allowed to be used in this context" /> <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" /> <requirements value="Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology." /> <min value="0" /> <max value="0" /> <base> <path value="Quantity.comparator" /> <min value="0" /> <max value="1" /> </base> <type> <code value="code" /> </type> <meaningWhenMissing value="If there is no comparator, then there is no modification of the value" /> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isModifier value="true" /> <isModifierReason value="This is labeled as "Is Modifier" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value" /> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="QuantityComparator" /> </extension> <strength value="required" /> <description value="How the Quantity should be understood and represented." /> <valueSet value="http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="SN.1 / CQ.1" /> </mapping> <mapping> <identity value="rim" /> <map value="IVL properties" /> </mapping> </element> <element id="Dosage.doseAndRate.rate[x]:rateQuantity.unit"> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable"> <valueBoolean value="true" /> </extension> <path value="Dosage.doseAndRate.rate[x].unit" /> <short value="Unit representation" /> <definition value="Hier wird die Einheit der Rate/Verabreichungsgeschwingigkeit in menschenlesbarer Sprache angegeben." /> <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" /> <requirements value="There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms." /> <min value="1" /> <max value="1" /> <base> <path value="Quantity.unit" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="(see OBX.6 etc.) / CQ.2" /> </mapping> <mapping> <identity value="rim" /> <map value="PQ.unit" /> </mapping> </element> <element id="Dosage.doseAndRate.rate[x]:rateQuantity.system"> <path value="Dosage.doseAndRate.rate[x].system" /> <short value="System that defines coded unit form" /> <definition value="The identification of the system that provides the coded form of the unit." /> <comment value="see http://en.wikipedia.org/wiki/Uniform_resource_identifier" /> <requirements value="Need to know the system that defines the coded form of the unit." /> <min value="1" /> <max value="1" /> <base> <path value="Quantity.system" /> <min value="0" /> <max value="1" /> </base> <type> <code value="uri" /> </type> <condition value="ele-1" /> <condition value="qty-3" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="(see OBX.6 etc.) / CQ.2" /> </mapping> <mapping> <identity value="rim" /> <map value="CO.codeSystem, PQ.translation.codeSystem" /> </mapping> </element> <element id="Dosage.doseAndRate.rate[x]:rateQuantity.code"> <path value="Dosage.doseAndRate.rate[x].code" /> <short value="Coded form of the unit" /> <definition value="Hier wird die Einheit der Rate/Verabreichungsgeschwingigkeit als Code angegeben." /> <comment value="The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system." /> <requirements value="Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest." /> <min value="1" /> <max value="1" /> <base> <path value="Quantity.code" /> <min value="0" /> <max value="1" /> </base> <type> <code value="code" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="(see OBX.6 etc.) / CQ.2" /> </mapping> <mapping> <identity value="rim" /> <map value="PQ.code, MO.currency, PQ.translation.code" /> </mapping> </element> <element id="Dosage.doseAndRate.rate[x]:rateRatio"> <path value="Dosage.doseAndRate.rate[x]" /> <sliceName value="rateRatio" /> <short value="Amount of medication per unit of time" /> <definition value="Hier wird die Rate/Verabreichungsgeschwindigkeit in Form einer festen Angabe abgebildet. Dabei wird die Geschwindigkeit bzw. Flussrate, mit der das Arzneimittel verabreicht wird, mit Hilfe einer Einheit abgebildet, in der Zähler (z.B. 1 ml) und Nenner (z.B. 1 h) einzeln abgebildet werden. **Beispiele für eine Flussrate mit Angabe von Zähler und Nenner:** * 1 Mililiter pro 1 Stunde (1ml / 1h) * 1 Milligramm pro 1 Stunde (1mg / 1h)" /> <comment value="It is possible to supply both a rate and a doseQuantity to provide full details about how the medication is to be administered and supplied. If the rate is intended to change over time, depending on local rules/regulations, each change should be captured as a new version of the MedicationRequest with an updated rate, or captured with a new MedicationRequest with the new rate. It is possible to specify a rate over time (for example, 100 ml/hour) using either the rateRatio and rateQuantity. The rateQuantity approach requires systems to have the capability to parse UCUM grammer where ml/hour is included rather than a specific ratio where the time is specified as the denominator. Where a rate such as 500ml over 2 hours is specified, the use of rateRatio may be more semantically correct than specifying using a rateQuantity of 250 mg/hour." /> <requirements value="Identifies the speed with which the medication was or will be introduced into the patient. Typically the rate for an infusion e.g. 100 ml per 1 hour or 100 ml/hr. May also be expressed as a rate per unit of time e.g. 500 ml per 2 hours. Other examples: 200 mcg/min or 200 mcg/1 minute; 1 liter/8 hours. Sometimes, a rate can imply duration when expressed as total volume / duration (e.g. 500mL/2 hours implies a duration of 2 hours). However, when rate doesn't imply duration (e.g. 250mL/hour), then the timing.repeat.duration is needed to convey the infuse over time period." /> <min value="0" /> <max value="1" /> <base> <path value="Dosage.doseAndRate.rate[x]" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Ratio" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="RXE22, RXE23, RXE-24" /> </mapping> <mapping> <identity value="rim" /> <map value=".rateQuantity" /> </mapping> </element> <element id="Dosage.doseAndRate.rate[x]:rateRatio.id"> <path value="Dosage.doseAndRate.rate[x].id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Dosage.doseAndRate.rate[x]:rateRatio.extension"> <path value="Dosage.doseAndRate.rate[x].extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Dosage.doseAndRate.rate[x]:rateRatio.numerator"> <path value="Dosage.doseAndRate.rate[x].numerator" /> <short value="Numerator value" /> <definition value="Hier wird der Zähler einer Verabreichungsgeschwindigkeit bzw. Flussrate angegeben. Dieser besteht aus einem Wert und einer Einheit (bevorzugt eine Volumeneinheit oder eine Gewichtseinheit). **Beispiele für den Zähler einer Verabreichungsgeschwindigkeit:** * 10 Milliliter (10 ml) * 5 Milligramm (5 mg)" /> <comment value="The context of use may frequently define what kind of quantity this is and therefore what kind of units can be used. The context of use may also restrict the values for the comparator." /> <min value="1" /> <max value="1" /> <base> <path value="Ratio.numerator" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Quantity" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="qty-3" /> <severity value="error" /> <human value="If a code for the unit is present, the system SHALL also be present" /> <expression value="code.empty() or system.exists()" /> <xpath value="not(exists(f:code)) or exists(f:system)" /> <source value="http://hl7.org/fhir/StructureDefinition/Quantity" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <binding> <strength value="preferred" /> <valueSet value="https://fhir.kbv.de/ValueSet/KBV_VS_SFHIR_BMP_DOSIEREINHEIT" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="SN (see also Range) or CQ" /> </mapping> <mapping> <identity value="rim" /> <map value="PQ, IVL<PQ>, MO, CO, depending on the values" /> </mapping> <mapping> <identity value="rim" /> <map value=".numerator" /> </mapping> </element> <element id="Dosage.doseAndRate.rate[x]:rateRatio.numerator.id"> <path value="Dosage.doseAndRate.rate[x].numerator.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Dosage.doseAndRate.rate[x]:rateRatio.numerator.extension"> <path value="Dosage.doseAndRate.rate[x].numerator.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Dosage.doseAndRate.rate[x]:rateRatio.numerator.value"> <path value="Dosage.doseAndRate.rate[x].numerator.value" /> <short value="Numerical value (with implicit precision)" /> <definition value="Hier wird die Menge angegeben, die über einen bestimmten Zeitraum verabreicht wird." /> <comment value="The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books)." /> <requirements value="Precision is handled implicitly in almost all cases of measurement." /> <min value="1" /> <max value="1" /> <base> <path value="Quantity.value" /> <min value="0" /> <max value="1" /> </base> <type> <code value="decimal" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="SN.2 / CQ - N/A" /> </mapping> <mapping> <identity value="rim" /> <map value="PQ.value, CO.value, MO.value, IVL.high or IVL.low depending on the value" /> </mapping> </element> <element id="Dosage.doseAndRate.rate[x]:rateRatio.numerator.comparator"> <path value="Dosage.doseAndRate.rate[x].numerator.comparator" /> <short value="< | <= | >= | > - how to understand the value" /> <definition value="How the value should be understood and represented - whether the actual value is greater or less than the stated value due to measurement issues; e.g. if the comparator is "<" , then the real value is < stated value." /> <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" /> <requirements value="Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology." /> <min value="0" /> <max value="1" /> <base> <path value="Quantity.comparator" /> <min value="0" /> <max value="1" /> </base> <type> <code value="code" /> </type> <meaningWhenMissing value="If there is no comparator, then there is no modification of the value" /> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isModifier value="true" /> <isModifierReason value="This is labeled as "Is Modifier" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value" /> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="QuantityComparator" /> </extension> <strength value="required" /> <description value="How the Quantity should be understood and represented." /> <valueSet value="http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="SN.1 / CQ.1" /> </mapping> <mapping> <identity value="rim" /> <map value="IVL properties" /> </mapping> </element> <element id="Dosage.doseAndRate.rate[x]:rateRatio.numerator.unit"> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable"> <valueBoolean value="true" /> </extension> <path value="Dosage.doseAndRate.rate[x].numerator.unit" /> <short value="Unit representation" /> <definition value="A human-readable form of the unit." /> <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" /> <requirements value="There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms." /> <min value="1" /> <max value="1" /> <base> <path value="Quantity.unit" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="(see OBX.6 etc.) / CQ.2" /> </mapping> <mapping> <identity value="rim" /> <map value="PQ.unit" /> </mapping> </element> <element id="Dosage.doseAndRate.rate[x]:rateRatio.numerator.system"> <path value="Dosage.doseAndRate.rate[x].numerator.system" /> <short value="System that defines coded unit form" /> <definition value="The identification of the system that provides the coded form of the unit." /> <comment value="see http://en.wikipedia.org/wiki/Uniform_resource_identifier" /> <requirements value="Need to know the system that defines the coded form of the unit." /> <min value="1" /> <max value="1" /> <base> <path value="Quantity.system" /> <min value="0" /> <max value="1" /> </base> <type> <code value="uri" /> </type> <condition value="ele-1" /> <condition value="qty-3" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="(see OBX.6 etc.) / CQ.2" /> </mapping> <mapping> <identity value="rim" /> <map value="CO.codeSystem, PQ.translation.codeSystem" /> </mapping> </element> <element id="Dosage.doseAndRate.rate[x]:rateRatio.numerator.code"> <path value="Dosage.doseAndRate.rate[x].numerator.code" /> <short value="Coded form of the unit" /> <definition value="Hier wird die Dosiereinheit als Code angegeben. Hierbei sollte nach Möglichkeit folgendes ValueSet verwendet werden: https://fhir.kbv.de/ValueSet/KBV_VS_SFHIR_BMP_DOSIEREINHEIT." /> <comment value="The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system." /> <requirements value="Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest." /> <min value="1" /> <max value="1" /> <base> <path value="Quantity.code" /> <min value="0" /> <max value="1" /> </base> <type> <code value="code" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="(see OBX.6 etc.) / CQ.2" /> </mapping> <mapping> <identity value="rim" /> <map value="PQ.code, MO.currency, PQ.translation.code" /> </mapping> </element> <element id="Dosage.doseAndRate.rate[x]:rateRatio.denominator"> <path value="Dosage.doseAndRate.rate[x].denominator" /> <short value="Denominator value" /> <definition value="Hier wird der Nenner einer Verabreichungsgeschwindigkeit bzw. Flussrate angegeben. Dieser entspricht einer Zeitspanne. **Beispiele für den Nenner einer Verabreichungsgeschwindigkeit:** * 3 Stunden (3h) * 1 Tag (1d)" /> <comment value="The context of use may frequently define what kind of quantity this is and therefore what kind of units can be used. The context of use may also restrict the values for the comparator." /> <min value="1" /> <max value="1" /> <base> <path value="Ratio.denominator" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Quantity" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="qty-3" /> <severity value="error" /> <human value="If a code for the unit is present, the system SHALL also be present" /> <expression value="code.empty() or system.exists()" /> <xpath value="not(exists(f:code)) or exists(f:system)" /> <source value="http://hl7.org/fhir/StructureDefinition/Quantity" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <binding> <strength value="required" /> <valueSet value="http://hl7.org/fhir/ValueSet/units-of-time" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="SN (see also Range) or CQ" /> </mapping> <mapping> <identity value="rim" /> <map value="PQ, IVL<PQ>, MO, CO, depending on the values" /> </mapping> <mapping> <identity value="rim" /> <map value=".denominator" /> </mapping> </element> <element id="Dosage.doseAndRate.rate[x]:rateRatio.denominator.id"> <path value="Dosage.doseAndRate.rate[x].denominator.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Dosage.doseAndRate.rate[x]:rateRatio.denominator.extension"> <path value="Dosage.doseAndRate.rate[x].denominator.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Dosage.doseAndRate.rate[x]:rateRatio.denominator.value"> <path value="Dosage.doseAndRate.rate[x].denominator.value" /> <short value="Numerical value (with implicit precision)" /> <definition value="Hier wird die Menge angegeben, die über einen bestimmten Zeitraum verabreicht wird." /> <comment value="The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books)." /> <requirements value="Precision is handled implicitly in almost all cases of measurement." /> <min value="1" /> <max value="1" /> <base> <path value="Quantity.value" /> <min value="0" /> <max value="1" /> </base> <type> <code value="decimal" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="SN.2 / CQ - N/A" /> </mapping> <mapping> <identity value="rim" /> <map value="PQ.value, CO.value, MO.value, IVL.high or IVL.low depending on the value" /> </mapping> </element> <element id="Dosage.doseAndRate.rate[x]:rateRatio.denominator.comparator"> <path value="Dosage.doseAndRate.rate[x].denominator.comparator" /> <short value="< | <= | >= | > - how to understand the value" /> <definition value="How the value should be understood and represented - whether the actual value is greater or less than the stated value due to measurement issues; e.g. if the comparator is "<" , then the real value is < stated value." /> <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" /> <requirements value="Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology." /> <min value="0" /> <max value="1" /> <base> <path value="Quantity.comparator" /> <min value="0" /> <max value="1" /> </base> <type> <code value="code" /> </type> <meaningWhenMissing value="If there is no comparator, then there is no modification of the value" /> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isModifier value="true" /> <isModifierReason value="This is labeled as "Is Modifier" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value" /> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="QuantityComparator" /> </extension> <strength value="required" /> <description value="How the Quantity should be understood and represented." /> <valueSet value="http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="SN.1 / CQ.1" /> </mapping> <mapping> <identity value="rim" /> <map value="IVL properties" /> </mapping> </element> <element id="Dosage.doseAndRate.rate[x]:rateRatio.denominator.unit"> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable"> <valueBoolean value="true" /> </extension> <path value="Dosage.doseAndRate.rate[x].denominator.unit" /> <short value="Unit representation" /> <definition value="A human-readable form of the unit." /> <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" /> <requirements value="There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms." /> <min value="1" /> <max value="1" /> <base> <path value="Quantity.unit" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="(see OBX.6 etc.) / CQ.2" /> </mapping> <mapping> <identity value="rim" /> <map value="PQ.unit" /> </mapping> </element> <element id="Dosage.doseAndRate.rate[x]:rateRatio.denominator.system"> <path value="Dosage.doseAndRate.rate[x].denominator.system" /> <short value="System that defines coded unit form" /> <definition value="The identification of the system that provides the coded form of the unit." /> <comment value="see http://en.wikipedia.org/wiki/Uniform_resource_identifier" /> <requirements value="Need to know the system that defines the coded form of the unit." /> <min value="1" /> <max value="1" /> <base> <path value="Quantity.system" /> <min value="0" /> <max value="1" /> </base> <type> <code value="uri" /> </type> <condition value="ele-1" /> <condition value="qty-3" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="(see OBX.6 etc.) / CQ.2" /> </mapping> <mapping> <identity value="rim" /> <map value="CO.codeSystem, PQ.translation.codeSystem" /> </mapping> </element> <element id="Dosage.doseAndRate.rate[x]:rateRatio.denominator.code"> <path value="Dosage.doseAndRate.rate[x].denominator.code" /> <short value="Coded form of the unit" /> <definition value="Hier wird die Dosiereinheit als Code angegeben. Hierbei sollte nach Möglichkeit folgendes ValueSet verwendet werden: https://fhir.kbv.de/ValueSet/KBV_VS_SFHIR_BMP_DOSIEREINHEIT." /> <comment value="The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system." /> <requirements value="Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest." /> <min value="1" /> <max value="1" /> <base> <path value="Quantity.code" /> <min value="0" /> <max value="1" /> </base> <type> <code value="code" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="(see OBX.6 etc.) / CQ.2" /> </mapping> <mapping> <identity value="rim" /> <map value="PQ.code, MO.currency, PQ.translation.code" /> </mapping> </element> <element id="Dosage.maxDosePerPeriod"> <path value="Dosage.maxDosePerPeriod" /> <short value="Upper limit on medication per unit of time" /> <definition value="Hier wird die maximale Dosis angegeben, die in einer bestimmten Zeitspanne verabreicht werden darf. Bei kombinierten Dauer- und Bedarfsmedikationen ("zusätzlich bei Bedarf") wird über dieses Element die maximale Gesamtdosis der Einnahme/Verabreichung von Arzneimitteln mit gleichem Wirkstoff oder aus der gleichen Wirkstoffgruppe abgebildet." /> <comment value="This is intended for use as an adjunct to the dosage when there is an upper cap. For example "2 tablets every 4 hours to a maximum of 8/day"." /> <requirements value="The maximum total quantity of a therapeutic substance that may be administered to a subject over the period of time. For example, 1000mg in 24 hours." /> <min value="0" /> <max value="1" /> <base> <path value="Dosage.maxDosePerPeriod" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Ratio" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="rat-1" /> <severity value="error" /> <human value="Numerator and denominator SHALL both be present, or both are absent. If both are absent, there SHALL be some extension present" /> <expression value="(numerator.empty() xor denominator.exists()) and (numerator.exists() or extension.exists())" /> <xpath value="(count(f:numerator) = count(f:denominator)) and ((count(f:numerator) > 0) or (count(f:extension) > 0))" /> <source value="http://hl7.org/fhir/StructureDefinition/Ratio" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="N/A" /> </mapping> <mapping> <identity value="rim" /> <map value="RTO" /> </mapping> <mapping> <identity value="v2" /> <map value="RXO-23, RXE-19" /> </mapping> <mapping> <identity value="rim" /> <map value=".maxDoseQuantity" /> </mapping> </element> <element id="Dosage.maxDosePerPeriod.id"> <path value="Dosage.maxDosePerPeriod.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Dosage.maxDosePerPeriod.extension"> <path value="Dosage.maxDosePerPeriod.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Dosage.maxDosePerPeriod.numerator"> <path value="Dosage.maxDosePerPeriod.numerator" /> <short value="Numerator value" /> <definition value="Hier wird die Menge abgebildet. Dieser Wert entspricht dem Wert im Zähler der Angabe "Maximale Menge pro Gabe"." /> <comment value="The context of use may frequently define what kind of quantity this is and therefore what kind of units can be used. The context of use may also restrict the values for the comparator." /> <min value="1" /> <max value="1" /> <base> <path value="Ratio.numerator" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Quantity" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="qty-3" /> <severity value="error" /> <human value="If a code for the unit is present, the system SHALL also be present" /> <expression value="code.empty() or system.exists()" /> <xpath value="not(exists(f:code)) or exists(f:system)" /> <source value="http://hl7.org/fhir/StructureDefinition/Quantity" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <binding> <strength value="preferred" /> <valueSet value="https://fhir.kbv.de/ValueSet/KBV_VS_SFHIR_BMP_DOSIEREINHEIT" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="SN (see also Range) or CQ" /> </mapping> <mapping> <identity value="rim" /> <map value="PQ, IVL<PQ>, MO, CO, depending on the values" /> </mapping> <mapping> <identity value="rim" /> <map value=".numerator" /> </mapping> </element> <element id="Dosage.maxDosePerPeriod.numerator.id"> <path value="Dosage.maxDosePerPeriod.numerator.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Dosage.maxDosePerPeriod.numerator.extension"> <path value="Dosage.maxDosePerPeriod.numerator.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Dosage.maxDosePerPeriod.numerator.value"> <path value="Dosage.maxDosePerPeriod.numerator.value" /> <short value="Numerical value (with implicit precision)" /> <definition value="Hier wird die Menge des Arzneimittels angegeben, die maximal innerhalb der Zeitspanne verabreicht/eingenommen werden darf." /> <comment value="The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books)." /> <requirements value="Precision is handled implicitly in almost all cases of measurement." /> <min value="1" /> <max value="1" /> <base> <path value="Quantity.value" /> <min value="0" /> <max value="1" /> </base> <type> <code value="decimal" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="SN.2 / CQ - N/A" /> </mapping> <mapping> <identity value="rim" /> <map value="PQ.value, CO.value, MO.value, IVL.high or IVL.low depending on the value" /> </mapping> </element> <element id="Dosage.maxDosePerPeriod.numerator.comparator"> <path value="Dosage.maxDosePerPeriod.numerator.comparator" /> <short value="< | <= | >= | > - how to understand the value" /> <definition value="How the value should be understood and represented - whether the actual value is greater or less than the stated value due to measurement issues; e.g. if the comparator is "<" , then the real value is < stated value." /> <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" /> <requirements value="Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology." /> <min value="0" /> <max value="1" /> <base> <path value="Quantity.comparator" /> <min value="0" /> <max value="1" /> </base> <type> <code value="code" /> </type> <meaningWhenMissing value="If there is no comparator, then there is no modification of the value" /> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isModifier value="true" /> <isModifierReason value="This is labeled as "Is Modifier" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value" /> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="QuantityComparator" /> </extension> <strength value="required" /> <description value="How the Quantity should be understood and represented." /> <valueSet value="http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="SN.1 / CQ.1" /> </mapping> <mapping> <identity value="rim" /> <map value="IVL properties" /> </mapping> </element> <element id="Dosage.maxDosePerPeriod.numerator.unit"> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable"> <valueBoolean value="true" /> </extension> <path value="Dosage.maxDosePerPeriod.numerator.unit" /> <short value="Unit representation" /> <definition value="A human-readable form of the unit." /> <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" /> <requirements value="There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms." /> <min value="1" /> <max value="1" /> <base> <path value="Quantity.unit" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="(see OBX.6 etc.) / CQ.2" /> </mapping> <mapping> <identity value="rim" /> <map value="PQ.unit" /> </mapping> </element> <element id="Dosage.maxDosePerPeriod.numerator.system"> <path value="Dosage.maxDosePerPeriod.numerator.system" /> <short value="System that defines coded unit form" /> <definition value="The identification of the system that provides the coded form of the unit." /> <comment value="see http://en.wikipedia.org/wiki/Uniform_resource_identifier" /> <requirements value="Need to know the system that defines the coded form of the unit." /> <min value="1" /> <max value="1" /> <base> <path value="Quantity.system" /> <min value="0" /> <max value="1" /> </base> <type> <code value="uri" /> </type> <condition value="ele-1" /> <condition value="qty-3" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="(see OBX.6 etc.) / CQ.2" /> </mapping> <mapping> <identity value="rim" /> <map value="CO.codeSystem, PQ.translation.codeSystem" /> </mapping> </element> <element id="Dosage.maxDosePerPeriod.numerator.code"> <path value="Dosage.maxDosePerPeriod.numerator.code" /> <short value="Coded form of the unit" /> <definition value="Hier wird die Dosiereinheit als Code angegeben. Hierbei sollte nach Möglichkeit folgendes ValueSet verwendet werden: https://fhir.kbv.de/ValueSet/KBV_VS_SFHIR_BMP_DOSIEREINHEIT." /> <comment value="The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system." /> <requirements value="Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest." /> <min value="1" /> <max value="1" /> <base> <path value="Quantity.code" /> <min value="0" /> <max value="1" /> </base> <type> <code value="code" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="(see OBX.6 etc.) / CQ.2" /> </mapping> <mapping> <identity value="rim" /> <map value="PQ.code, MO.currency, PQ.translation.code" /> </mapping> </element> <element id="Dosage.maxDosePerPeriod.denominator"> <path value="Dosage.maxDosePerPeriod.denominator" /> <short value="Denominator value" /> <definition value="Hier wird die Zeitspanne angegeben. Dieser Wert entspricht dem Wert im Nenner der Angabe "Maximale Menge pro Gabe"." /> <comment value="The context of use may frequently define what kind of quantity this is and therefore what kind of units can be used. The context of use may also restrict the values for the comparator." /> <min value="1" /> <max value="1" /> <base> <path value="Ratio.denominator" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Quantity" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="qty-3" /> <severity value="error" /> <human value="If a code for the unit is present, the system SHALL also be present" /> <expression value="code.empty() or system.exists()" /> <xpath value="not(exists(f:code)) or exists(f:system)" /> <source value="http://hl7.org/fhir/StructureDefinition/Quantity" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <binding> <strength value="required" /> <valueSet value="http://hl7.org/fhir/ValueSet/units-of-time" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="SN (see also Range) or CQ" /> </mapping> <mapping> <identity value="rim" /> <map value="PQ, IVL<PQ>, MO, CO, depending on the values" /> </mapping> <mapping> <identity value="rim" /> <map value=".denominator" /> </mapping> </element> <element id="Dosage.maxDosePerPeriod.denominator.id"> <path value="Dosage.maxDosePerPeriod.denominator.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Dosage.maxDosePerPeriod.denominator.extension"> <path value="Dosage.maxDosePerPeriod.denominator.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Dosage.maxDosePerPeriod.denominator.value"> <path value="Dosage.maxDosePerPeriod.denominator.value" /> <short value="Numerical value (with implicit precision)" /> <definition value="Hier wird der Wert der Zeitspanne angegeben, innerhalb der die definierte Menge des Arzneimittels maximal verabreicht/eingenommen werden darf." /> <comment value="The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books)." /> <requirements value="Precision is handled implicitly in almost all cases of measurement." /> <min value="1" /> <max value="1" /> <base> <path value="Quantity.value" /> <min value="0" /> <max value="1" /> </base> <type> <code value="decimal" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="SN.2 / CQ - N/A" /> </mapping> <mapping> <identity value="rim" /> <map value="PQ.value, CO.value, MO.value, IVL.high or IVL.low depending on the value" /> </mapping> </element> <element id="Dosage.maxDosePerPeriod.denominator.comparator"> <path value="Dosage.maxDosePerPeriod.denominator.comparator" /> <short value="< | <= | >= | > - how to understand the value" /> <definition value="How the value should be understood and represented - whether the actual value is greater or less than the stated value due to measurement issues; e.g. if the comparator is "<" , then the real value is < stated value." /> <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" /> <requirements value="Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology." /> <min value="0" /> <max value="1" /> <base> <path value="Quantity.comparator" /> <min value="0" /> <max value="1" /> </base> <type> <code value="code" /> </type> <meaningWhenMissing value="If there is no comparator, then there is no modification of the value" /> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isModifier value="true" /> <isModifierReason value="This is labeled as "Is Modifier" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value" /> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="QuantityComparator" /> </extension> <strength value="required" /> <description value="How the Quantity should be understood and represented." /> <valueSet value="http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="SN.1 / CQ.1" /> </mapping> <mapping> <identity value="rim" /> <map value="IVL properties" /> </mapping> </element> <element id="Dosage.maxDosePerPeriod.denominator.unit"> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable"> <valueBoolean value="true" /> </extension> <path value="Dosage.maxDosePerPeriod.denominator.unit" /> <short value="Unit representation" /> <definition value="A human-readable form of the unit." /> <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" /> <requirements value="There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms." /> <min value="1" /> <max value="1" /> <base> <path value="Quantity.unit" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="(see OBX.6 etc.) / CQ.2" /> </mapping> <mapping> <identity value="rim" /> <map value="PQ.unit" /> </mapping> </element> <element id="Dosage.maxDosePerPeriod.denominator.system"> <path value="Dosage.maxDosePerPeriod.denominator.system" /> <short value="System that defines coded unit form" /> <definition value="The identification of the system that provides the coded form of the unit." /> <comment value="see http://en.wikipedia.org/wiki/Uniform_resource_identifier" /> <requirements value="Need to know the system that defines the coded form of the unit." /> <min value="1" /> <max value="1" /> <base> <path value="Quantity.system" /> <min value="0" /> <max value="1" /> </base> <type> <code value="uri" /> </type> <condition value="ele-1" /> <condition value="qty-3" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="(see OBX.6 etc.) / CQ.2" /> </mapping> <mapping> <identity value="rim" /> <map value="CO.codeSystem, PQ.translation.codeSystem" /> </mapping> </element> <element id="Dosage.maxDosePerPeriod.denominator.code"> <path value="Dosage.maxDosePerPeriod.denominator.code" /> <short value="Coded form of the unit" /> <definition value="Hier wird die Zeiteinheit als Code angegeben." /> <comment value="The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system." /> <requirements value="Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest." /> <min value="1" /> <max value="1" /> <base> <path value="Quantity.code" /> <min value="0" /> <max value="1" /> </base> <type> <code value="code" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="(see OBX.6 etc.) / CQ.2" /> </mapping> <mapping> <identity value="rim" /> <map value="PQ.code, MO.currency, PQ.translation.code" /> </mapping> </element> <element id="Dosage.maxDosePerAdministration"> <path value="Dosage.maxDosePerAdministration" /> <short value="Upper limit on medication per administration" /> <definition value="Hier wird die Dosiermenge mittels einer maximalen Menge angegeben." /> <comment value="This is intended for use as an adjunct to the dosage when there is an upper cap. For example, a body surface area related dose with a maximum amount, such as 1.5 mg/m2 (maximum 2 mg) IV over 5 – 10 minutes would have doseQuantity of 1.5 mg/m2 and maxDosePerAdministration of 2 mg." /> <requirements value="The maximum total quantity of a therapeutic substance that may be administered to a subject per administration." /> <min value="0" /> <max value="1" /> <base> <path value="Dosage.maxDosePerAdministration" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Quantity" /> <profile value="http://hl7.org/fhir/StructureDefinition/SimpleQuantity" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="qty-3" /> <severity value="error" /> <human value="If a code for the unit is present, the system SHALL also be present" /> <expression value="code.empty() or system.exists()" /> <xpath value="not(exists(f:code)) or exists(f:system)" /> <source value="http://hl7.org/fhir/StructureDefinition/Quantity" /> </constraint> <constraint> <key value="sqty-1" /> <severity value="error" /> <human value="The comparator is not used on a SimpleQuantity" /> <expression value="comparator.empty()" /> <xpath value="not(exists(f:comparator))" /> <source value="http://hl7.org/fhir/StructureDefinition/SimpleQuantity" /> </constraint> <mustSupport value="true" /> <isModifier value="false" /> <isSummary value="true" /> <binding> <strength value="preferred" /> <valueSet value="https://fhir.kbv.de/ValueSet/KBV_VS_SFHIR_BMP_DOSIEREINHEIT" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="SN (see also Range) or CQ" /> </mapping> <mapping> <identity value="rim" /> <map value="PQ, IVL<PQ>, MO, CO, depending on the values" /> </mapping> <mapping> <identity value="rim" /> <map value="not supported" /> </mapping> </element> <element id="Dosage.maxDosePerAdministration.id"> <path value="Dosage.maxDosePerAdministration.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Dosage.maxDosePerAdministration.extension"> <path value="Dosage.maxDosePerAdministration.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Dosage.maxDosePerAdministration.value"> <path value="Dosage.maxDosePerAdministration.value" /> <short value="Numerical value (with implicit precision)" /> <definition value="Hier wird die Menge des Arzneimittels angegeben, die verabreicht/eingenommen wird." /> <comment value="The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books)." /> <requirements value="Precision is handled implicitly in almost all cases of measurement." /> <min value="1" /> <max value="1" /> <base> <path value="Quantity.value" /> <min value="0" /> <max value="1" /> </base> <type> <code value="decimal" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="SN.2 / CQ - N/A" /> </mapping> <mapping> <identity value="rim" /> <map value="PQ.value, CO.value, MO.value, IVL.high or IVL.low depending on the value" /> </mapping> </element> <element id="Dosage.maxDosePerAdministration.comparator"> <path value="Dosage.maxDosePerAdministration.comparator" /> <short value="< | <= | >= | > - how to understand the value" /> <definition value="Not allowed to be used in this context" /> <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" /> <requirements value="Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology." /> <min value="0" /> <max value="0" /> <base> <path value="Quantity.comparator" /> <min value="0" /> <max value="1" /> </base> <type> <code value="code" /> </type> <meaningWhenMissing value="If there is no comparator, then there is no modification of the value" /> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isModifier value="true" /> <isModifierReason value="This is labeled as "Is Modifier" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value" /> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="QuantityComparator" /> </extension> <strength value="required" /> <description value="How the Quantity should be understood and represented." /> <valueSet value="http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="SN.1 / CQ.1" /> </mapping> <mapping> <identity value="rim" /> <map value="IVL properties" /> </mapping> </element> <element id="Dosage.maxDosePerAdministration.unit"> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable"> <valueBoolean value="true" /> </extension> <path value="Dosage.maxDosePerAdministration.unit" /> <short value="Unit representation" /> <definition value="A human-readable form of the unit." /> <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" /> <requirements value="There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms." /> <min value="1" /> <max value="1" /> <base> <path value="Quantity.unit" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="(see OBX.6 etc.) / CQ.2" /> </mapping> <mapping> <identity value="rim" /> <map value="PQ.unit" /> </mapping> </element> <element id="Dosage.maxDosePerAdministration.system"> <path value="Dosage.maxDosePerAdministration.system" /> <short value="System that defines coded unit form" /> <definition value="The identification of the system that provides the coded form of the unit." /> <comment value="see http://en.wikipedia.org/wiki/Uniform_resource_identifier" /> <requirements value="Need to know the system that defines the coded form of the unit." /> <min value="1" /> <max value="1" /> <base> <path value="Quantity.system" /> <min value="0" /> <max value="1" /> </base> <type> <code value="uri" /> </type> <condition value="ele-1" /> <condition value="qty-3" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="(see OBX.6 etc.) / CQ.2" /> </mapping> <mapping> <identity value="rim" /> <map value="CO.codeSystem, PQ.translation.codeSystem" /> </mapping> </element> <element id="Dosage.maxDosePerAdministration.code"> <path value="Dosage.maxDosePerAdministration.code" /> <short value="Coded form of the unit" /> <definition value="Hier wird die Dosiereinheit als Code angegeben. Hierbei sollte nach Möglichkeit folgendes ValueSet verwendet werden: https://fhir.kbv.de/ValueSet/KBV_VS_SFHIR_BMP_DOSIEREINHEIT." /> <comment value="The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system." /> <requirements value="Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest." /> <min value="1" /> <max value="1" /> <base> <path value="Quantity.code" /> <min value="0" /> <max value="1" /> </base> <type> <code value="code" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mustSupport value="true" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="(see OBX.6 etc.) / CQ.2" /> </mapping> <mapping> <identity value="rim" /> <map value="PQ.code, MO.currency, PQ.translation.code" /> </mapping> </element> <element id="Dosage.maxDosePerLifetime"> <path value="Dosage.maxDosePerLifetime" /> <short value="Upper limit on medication per lifetime of the patient" /> <definition value="Upper limit on medication per lifetime of the patient." /> <comment value="The context of use may frequently define what kind of quantity this is and therefore what kind of units can be used. The context of use may also restrict the values for the comparator." /> <requirements value="The maximum total quantity of a therapeutic substance that may be administered per lifetime of the subject." /> <min value="0" /> <max value="1" /> <base> <path value="Dosage.maxDosePerLifetime" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Quantity" /> <profile value="http://hl7.org/fhir/StructureDefinition/SimpleQuantity" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="qty-3" /> <severity value="error" /> <human value="If a code for the unit is present, the system SHALL also be present" /> <expression value="code.empty() or system.exists()" /> <xpath value="not(exists(f:code)) or exists(f:system)" /> <source value="http://hl7.org/fhir/StructureDefinition/Quantity" /> </constraint> <constraint> <key value="sqty-1" /> <severity value="error" /> <human value="The comparator is not used on a SimpleQuantity" /> <expression value="comparator.empty()" /> <xpath value="not(exists(f:comparator))" /> <source value="http://hl7.org/fhir/StructureDefinition/SimpleQuantity" /> </constraint> <isModifier value="false" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="SN (see also Range) or CQ" /> </mapping> <mapping> <identity value="rim" /> <map value="PQ, IVL<PQ>, MO, CO, depending on the values" /> </mapping> <mapping> <identity value="rim" /> <map value="not supported" /> </mapping> </element> </snapshot> <differential> <element id="Dosage.text"> <path value="Dosage.text" /> <definition value="Hier kann die Dosieranweisung in Form eines Freitextes abgebildet werden." /> <mustSupport value="true" /> </element> <element id="Dosage.additionalInstruction"> <path value="Dosage.additionalInstruction" /> <definition value="Hier wird eine ergänzende Anweisung anhand eines entsprechenden Codes oder alternativ mit einem Freitext angegeben." /> <mustSupport value="true" /> </element> <element id="Dosage.additionalInstruction.coding"> <path value="Dosage.additionalInstruction.coding" /> <slicing> <discriminator> <type value="pattern" /> <path value="$this" /> </discriminator> <rules value="open" /> </slicing> <definition value="Hier werden Codes angegeben." /> <comment value="Das MustSupport gilt nur für die vordefinierten Slices." /> <mustSupport value="true" /> </element> <element id="Dosage.additionalInstruction.coding:snomed"> <path value="Dosage.additionalInstruction.coding" /> <sliceName value="snomed" /> <min value="0" /> <max value="1" /> <patternCoding> <system value="http://snomed.info/sct" /> </patternCoding> <mustSupport value="true" /> <binding> <strength value="extensible" /> <valueSet value="https://gematik.de/fhir/terminology/ValueSet/epa-additional-dosage-instructions-snomed-ct-vs" /> </binding> </element> <element id="Dosage.additionalInstruction.coding:snomed.system"> <path value="Dosage.additionalInstruction.coding.system" /> <min value="1" /> <mustSupport value="true" /> </element> <element id="Dosage.additionalInstruction.coding:snomed.version"> <path value="Dosage.additionalInstruction.coding.version" /> <min value="1" /> <mustSupport value="true" /> </element> <element id="Dosage.additionalInstruction.coding:snomed.code"> <path value="Dosage.additionalInstruction.coding.code" /> <min value="1" /> <mustSupport value="true" /> </element> <element id="Dosage.additionalInstruction.coding:snomed.display"> <path value="Dosage.additionalInstruction.coding.display" /> <min value="1" /> <mustSupport value="true" /> </element> <element id="Dosage.additionalInstruction.text"> <path value="Dosage.additionalInstruction.text" /> <definition value="Hier wird ein Freitext eingetragen." /> <mustSupport value="true" /> </element> <element id="Dosage.patientInstruction"> <path value="Dosage.patientInstruction" /> <definition value="Hier können Hinweise zu Anwendung, Lagerung, Einnahme, etc. bzw. eine Gebrauchsanweisung in patientenverständlicher Sprache abgebildet werden." /> <mustSupport value="true" /> </element> <element id="Dosage.timing"> <path value="Dosage.timing" /> <mustSupport value="true" /> </element> <element id="Dosage.timing.event"> <path value="Dosage.timing.event" /> <definition value="Hier kann ein Zeitpunkt einer Verabreichung/Einnahme abgebildet werden." /> <mustSupport value="true" /> </element> <element id="Dosage.timing.repeat"> <path value="Dosage.timing.repeat" /> <definition value="Hier kann angegeben werden, über welche Zeitspanne eine einzelne Verabreichung/Einnahme durchgeführt wird. Dabei müssen stets Wert und Einheit der Zeitspanne angegeben werden. Optional kann zusätzlich zu einer Zeitspanne eine maximale Zeitspanne für eine einzelne Verabreichung/Einnahme angegeben werden. **Beispiel:** * Die Dosierung der einzelnen Verabreichung/Einnahme eines Arzneimittels erfolgt über die Zeitspanne von 1 Stunde (1h)." /> <mustSupport value="true" /> </element> <element id="Dosage.timing.repeat.bounds[x]"> <path value="Dosage.timing.repeat.bounds[x]" /> <slicing> <discriminator> <type value="type" /> <path value="$this" /> </discriminator> <ordered value="false" /> <rules value="open" /> </slicing> <definition value="Hier wird abgebildet, in welchem Zeitraum oder in welcher Zeitspanne das Arzneimittel in der spezifischen Dosierung verabreicht/eingenommen wird. Zum Beispiel können hiermit spezifische Zeiträume bei der Auf- oder Ab-Dosierung von Medikamenten abgebildet werden." /> <min value="1" /> <mustSupport value="true" /> </element> <element id="Dosage.timing.repeat.bounds[x]:boundsDuration"> <path value="Dosage.timing.repeat.bounds[x]" /> <sliceName value="boundsDuration" /> <definition value="Hier kann angegeben, in welcher festen Zeitspanne das Arzneimittel in der spezifischen Dosierung verabreicht/eingenommen wird. Dabei beginnt und endet der mögliche Zeitraum der Einnahme in dem Zeitraum, welcher innerhalb des Elements \"Verabreichung/Einnahme: Zeitangabe-Auswahl\" -> \"Zeitraum\" auf der obersten Ebene des Profils \"Medikations-Information\" definiert ist. **Beispiel:** * Die Verabreichung/Einnahme eines Arzneimittels erfolgt für 5 Tage, wobei der unter \"Verabreichung/Einnahme: Zeitangabe-Auswahl\" -> \"Zeitraum\" -> \"von\" / \"bis\" definierte Zeitraum am 01.01.2024 beginnt (Element \"von\") und am 10.01.2024 (Element \"bis\") endet. Innerhalb dieses Zeitraums erfolgt die Einnahme für 5 Tage." /> <min value="0" /> <max value="1" /> <type> <code value="Duration" /> </type> <mustSupport value="true" /> </element> <element id="Dosage.timing.repeat.bounds[x]:boundsDuration.value"> <path value="Dosage.timing.repeat.bounds[x].value" /> <definition value="Hier kann der Wert der Zeitspanne angegeben werden, innerhalb der das Arzneimittel verabreicht/eingenommen wird." /> <min value="1" /> <mustSupport value="true" /> </element> <element id="Dosage.timing.repeat.bounds[x]:boundsDuration.unit"> <path value="Dosage.timing.repeat.bounds[x].unit" /> <definition value="Hier wird die Zeiteinheit in menschenlesbarer Sprache angegeben." /> <min value="1" /> <mustSupport value="true" /> </element> <element id="Dosage.timing.repeat.bounds[x]:boundsDuration.system"> <path value="Dosage.timing.repeat.bounds[x].system" /> <min value="1" /> <mustSupport value="true" /> </element> <element id="Dosage.timing.repeat.bounds[x]:boundsDuration.code"> <path value="Dosage.timing.repeat.bounds[x].code" /> <definition value="Hier wird die Zeiteinheit als Code angegeben." /> <min value="1" /> <mustSupport value="true" /> </element> <element id="Dosage.timing.repeat.bounds[x]:boundsRange"> <path value="Dosage.timing.repeat.bounds[x]" /> <sliceName value="boundsRange" /> <definition value="Hier kann angegeben, in welcher variablen Zeitspanne das Arzneimittel in der spezifischen Dosierung verabreicht/eingenommen wird. Dabei beginnt und endet der mögliche Zeitraum der Einnahme in dem Zeitraum, welcher innerhalb des Elements \"Verabreichung/Einnahme: Zeitangabe-Auswahl\" -> \"Zeitraum\" auf der obersten Ebene des Profils \"Medikations-Information\" definiert ist. **Beispiel:** * Die Verabreichung/Einnahme eines Arzneimittels erfolgt für 3 Tage (Untergrenze der Zeitspanne) bis 5 Tage (Obergrenze der Zeitspanne), wobei der unter \"Verabreichung/Einnahme: Zeitangabe-Auswahl\" -> \"Zeitraum\" -> \"von\" / \"bis\" definierte Zeitraum am 01.01.2024 beginnt (Element \"von\") und am 10.01.2024 (Element \"bis\") endet. Innerhalb dieses Zeitraums erfolgt die Einnahme für 3 Tage bis 5 Tage." /> <min value="0" /> <max value="1" /> <type> <code value="Range" /> </type> <mustSupport value="true" /> </element> <element id="Dosage.timing.repeat.bounds[x]:boundsRange.low"> <path value="Dosage.timing.repeat.bounds[x].low" /> <definition value="Hier wird die Untergrenze der variablen Zeitspanne abgebildet." /> <mustSupport value="true" /> </element> <element id="Dosage.timing.repeat.bounds[x]:boundsRange.low.value"> <path value="Dosage.timing.repeat.bounds[x].low.value" /> <definition value="Hier kann der Wert der Zeitspanne angegeben werden, innerhalb der das Arzneimittel verabreicht/eingenommen wird." /> <min value="1" /> <mustSupport value="true" /> </element> <element id="Dosage.timing.repeat.bounds[x]:boundsRange.low.unit"> <path value="Dosage.timing.repeat.bounds[x].low.unit" /> <definition value="Hier wird die Zeiteinheit in menschenlesbarer Sprache angegeben." /> <min value="1" /> <mustSupport value="true" /> </element> <element id="Dosage.timing.repeat.bounds[x]:boundsRange.low.system"> <path value="Dosage.timing.repeat.bounds[x].low.system" /> <min value="1" /> <mustSupport value="true" /> </element> <element id="Dosage.timing.repeat.bounds[x]:boundsRange.low.code"> <path value="Dosage.timing.repeat.bounds[x].low.code" /> <definition value="Hier wird die Zeiteinheit als Code angegeben." /> <min value="1" /> <mustSupport value="true" /> </element> <element id="Dosage.timing.repeat.bounds[x]:boundsRange.high"> <path value="Dosage.timing.repeat.bounds[x].high" /> <definition value="Hier wird die Obergrenze der variablen Zeitspanne abgebildet." /> <mustSupport value="true" /> </element> <element id="Dosage.timing.repeat.bounds[x]:boundsRange.high.value"> <path value="Dosage.timing.repeat.bounds[x].high.value" /> <definition value="Hier kann der Wert der Zeitspanne angegeben werden, innerhalb der das Arzneimittel verabreicht/eingenommen wird." /> <min value="1" /> <mustSupport value="true" /> </element> <element id="Dosage.timing.repeat.bounds[x]:boundsRange.high.unit"> <path value="Dosage.timing.repeat.bounds[x].high.unit" /> <definition value="Hier wird die Zeiteinheit in menschenlesbarer Sprache angegeben." /> <min value="1" /> <mustSupport value="true" /> </element> <element id="Dosage.timing.repeat.bounds[x]:boundsRange.high.system"> <path value="Dosage.timing.repeat.bounds[x].high.system" /> <min value="1" /> <mustSupport value="true" /> </element> <element id="Dosage.timing.repeat.bounds[x]:boundsRange.high.code"> <path value="Dosage.timing.repeat.bounds[x].high.code" /> <definition value="Hier wird die Zeiteinheit als Code angegeben." /> <min value="1" /> <mustSupport value="true" /> </element> <element id="Dosage.timing.repeat.bounds[x]:boundsPeriod"> <path value="Dosage.timing.repeat.bounds[x]" /> <sliceName value="boundsPeriod" /> <definition value="Hier wird abgebildet, in welchem Zeitraum das Arzneimittel in der spezifischen Dosierung verabreicht/eingenommen wird. **Beispiel:** * Abbildung spezifischer Zeiträume bei der Auf- oder Ab-Dosierung von Medikamenten unter Angabe von konkreten Datumsangaben." /> <min value="0" /> <max value="1" /> <type> <code value="Period" /> </type> <mustSupport value="true" /> </element> <element id="Dosage.timing.repeat.bounds[x]:boundsPeriod.start"> <path value="Dosage.timing.repeat.bounds[x].start" /> <definition value="Hier wird der Beginn des dosisspezifischen Zeitraumes angegeben." /> <min value="1" /> <mustSupport value="true" /> </element> <element id="Dosage.timing.repeat.bounds[x]:boundsPeriod.end"> <path value="Dosage.timing.repeat.bounds[x].end" /> <definition value="Hier wird das Ende des dosisspezifischen Zeitraumes angegeben." /> <mustSupport value="true" /> </element> <element id="Dosage.timing.repeat.count"> <path value="Dosage.timing.repeat.count" /> <definition value="Hier kann die absolute Anzahl der Wiederholungen einer Verabreichung/Einnahme eines Arzneimittels als Zahl angegeben werden. **Beispiel:** * Anzahl der Einnahmen eines Arzneimittels = 5" /> <mustSupport value="true" /> </element> <element id="Dosage.timing.repeat.countMax"> <path value="Dosage.timing.repeat.countMax" /> <definition value="Hier kann die maximale Anzahl der Wiederholungen einer Verabreichung/Einnahme eines Arzneimittels als Zahl angegeben werden. Eine maximale Anzahl der Wiederholungen kann nur angegeben werden, wenn eine absolute Anzahl der Wiederholungen einer Verabreichung/Einnahme eines Arzneimittels angegeben ist. **Beispiel:** * Maximale Anzahl der Einnahmen eines Arzneimittels = 10" /> <mustSupport value="true" /> </element> <element id="Dosage.timing.repeat.duration"> <path value="Dosage.timing.repeat.duration" /> <definition value="Hier kann der Wert der Zeitspanne angegeben werden, innerhalb der das Arzneimittel verabreicht/eingenommen wird." /> <mustSupport value="true" /> </element> <element id="Dosage.timing.repeat.durationMax"> <path value="Dosage.timing.repeat.durationMax" /> <definition value="Hier kann der maximale Wert der Zeitspanne angegeben werden, innerhalb der das Arzneimittel verabreicht/eingenommen wird. Eine maximale Zeitspanne kann nur angegeben werden, wenn eine feste Zeitspanne für die Dauer der einzelnen Verabreichung/Einnahme angegeben wird." /> <mustSupport value="true" /> </element> <element id="Dosage.timing.repeat.durationUnit"> <path value="Dosage.timing.repeat.durationUnit" /> <definition value="Hier wird die Zeiteinheit angegeben." /> <mustSupport value="true" /> </element> <element id="Dosage.timing.repeat.frequency"> <path value="Dosage.timing.repeat.frequency" /> <definition value="Hier wird angegeben, mit welcher Frequenz das Arzneimittel innerhalb einer bestimmten Zeitspanne verabreicht/eingenommen wird." /> <mustSupport value="true" /> </element> <element id="Dosage.timing.repeat.frequencyMax"> <path value="Dosage.timing.repeat.frequencyMax" /> <definition value="Hier wird angegeben, mit welcher Frequenz das Arzneimittel innerhalb einer bestimmten Zeitspanne verabreicht/eingenommen wird." /> <mustSupport value="true" /> </element> <element id="Dosage.timing.repeat.period"> <path value="Dosage.timing.repeat.period" /> <definition value="Hier wird der absolute Wert der Zeitspanne angegeben, innerhalb der die definierte Anzahl der Verabreichungen/Einnahmen durchgeführt wird." /> <mustSupport value="true" /> </element> <element id="Dosage.timing.repeat.periodMax"> <path value="Dosage.timing.repeat.periodMax" /> <definition value="Hier wird der maximale Wert der Zeitspanne angegeben, innerhalb der die definierte Anzahl der Verabreichungen/Einnahmen durchgeführt wird. Wenn ein maximaler Wert der Zeitspanne angegeben wird, muss ein absoluter Wert der Zeitspanne angegeben werden. In diesem Fall definieren die beiden Werte "Absoluter Wert der Zeitspanne" und "Maximaler Wert der Zeitspanne" einen Bereich für die Zeitspanne. Der absolute Wert der Zeitspanne entspricht dann der Untergrenze für einen Bereich der Zeitspanne und der maximale Wert der Zeitspanne der Obergrenze für den Bereich der Zeitspanne." /> <mustSupport value="true" /> </element> <element id="Dosage.timing.repeat.periodUnit"> <path value="Dosage.timing.repeat.periodUnit" /> <definition value="Hier wird die Zeiteinheit angegeben." /> <mustSupport value="true" /> </element> <element id="Dosage.timing.repeat.dayOfWeek"> <path value="Dosage.timing.repeat.dayOfWeek" /> <definition value="Hier wird der Wochentag, an dem das Arzneimittel verabreicht/eingenommen werden soll, angegeben." /> <mustSupport value="true" /> </element> <element id="Dosage.timing.repeat.timeOfDay"> <path value="Dosage.timing.repeat.timeOfDay" /> <definition value="Hier werden Uhrzeiten angegeben, zu denen das Arzneimittel verabreicht/eingenommen wird." /> <mustSupport value="true" /> </element> <element id="Dosage.timing.repeat.when"> <path value="Dosage.timing.repeat.when" /> <slicing> <discriminator> <type value="pattern" /> <path value="$this" /> </discriminator> <rules value="open" /> </slicing> <definition value="Hier werden Tageszeiten angegeben, zu denen das Arzneimittel verabreicht/eingenommen wird. Ergänzend können Zusatzinformationen angegeben werden, die die Verabreichung/Einnahme des Arzneimittels in Bezug zu Mahlzeiten und Schlafzeiten abbilden." /> <mustSupport value="true" /> </element> <element id="Dosage.timing.repeat.when:period-of-day"> <path value="Dosage.timing.repeat.when" /> <sliceName value="period-of-day" /> <definition value="Hier werden Tageszeiten, zu denen das Arzneimittel verabreicht/eingenommen wird, als Code aus dem FHIR ValueSet http://hl7.org/fhir/ValueSet/event-timing angegeben. Dabei spiegeln die vier möglichen Konzepte "Morgens", "Mittags", "Abends", "Nachts" das in der Praxis übliche "4er-Einnahmeschema" wieder (beispielsweise "0-1-0-0" entspricht dem Konzept "Einnahme von einer Tablette Mittags")." /> <min value="0" /> <max value="1" /> <mustSupport value="true" /> <binding> <strength value="required" /> <valueSet value="https://gematik.de/fhir/terminology/ValueSet/epa-event-timing-vs" /> </binding> </element> <element id="Dosage.timing.repeat.when:meal-sleep-times"> <path value="Dosage.timing.repeat.when" /> <sliceName value="meal-sleep-times" /> <definition value="Hier wird eine mahlzeiten- und schlafzeitenabhängige Zusatzinformation zur Einnahme eines Arzneimittels als Code aus dem FHIR ValueSet http://hl7.org/fhir/ValueSet/event-timing angegeben." /> <min value="0" /> <max value="*" /> <mustSupport value="true" /> <binding> <strength value="required" /> <valueSet value="https://gematik.de/fhir/terminology/ValueSet/epa-timing-event-vs" /> </binding> </element> <element id="Dosage.timing.repeat.offset"> <path value="Dosage.timing.repeat.offset" /> <definition value="Hier wird der Zeitabstand der Verabreichung/Einnahme eines Arzneimittels zu einer Mahlzeit oder der Schlafzeit in Minuten angegeben." /> <mustSupport value="true" /> </element> <element id="Dosage.asNeeded[x]"> <path value="Dosage.asNeeded[x]" /> <slicing> <discriminator> <type value="type" /> <path value="$this" /> </discriminator> <ordered value="false" /> <rules value="open" /> </slicing> <definition value="Hier werden Angaben zur Dosierung als Bedarfsmedikation gemacht." /> <mustSupport value="true" /> </element> <element id="Dosage.asNeeded[x]:asNeededBoolean"> <path value="Dosage.asNeeded[x]" /> <sliceName value="asNeededBoolean" /> <definition value="Hier wird angegeben, ob es sich um eine Bedarfsmedikation handelt." /> <min value="0" /> <max value="1" /> <type> <code value="boolean" /> </type> <mustSupport value="true" /> </element> <element id="Dosage.asNeeded[x]:asNeededCodeableConcept"> <path value="Dosage.asNeeded[x]" /> <sliceName value="asNeededCodeableConcept" /> <definition value="Hier wird angegeben, welcher Zustand die Bedingung zur Verabreichung/Einnahme der Bedarfsmedikation ist, z. B. Schmerzen, Übelkeit, usw." /> <min value="0" /> <max value="1" /> <type> <code value="CodeableConcept" /> </type> <mustSupport value="true" /> </element> <element id="Dosage.asNeeded[x]:asNeededCodeableConcept.coding"> <path value="Dosage.asNeeded[x].coding" /> <slicing> <discriminator> <type value="pattern" /> <path value="$this" /> </discriminator> <rules value="open" /> </slicing> <definition value="Hier werden Codes angegeben." /> <comment value="Das MustSupport gilt nur für die vordefinierten Slices." /> <mustSupport value="true" /> </element> <element id="Dosage.asNeeded[x]:asNeededCodeableConcept.coding:snomed"> <path value="Dosage.asNeeded[x].coding" /> <sliceName value="snomed" /> <definition value="Hier wird ein Code aus dem Code-System SNOMED CT® eingetragen. Die Bedingung zum Auslösen einer Bedarfsmedikation ist ein breites Feld, welches das gesamte Spektrum der Medizin umfassen kann und ist deshalb in FHIR® als Example-binding von SNOMED CT®-Konzepten in den Subklassen der SCTID 404684003 vorgesehen, siehe http://hl7.org/fhir/ValueSet/medication-as-needed-reason." /> <min value="0" /> <max value="1" /> <patternCoding> <system value="http://snomed.info/sct" /> </patternCoding> <mustSupport value="true" /> <binding> <strength value="required" /> <valueSet value="https://gematik.de/fhir/terminology/ValueSet/epa-prn-medication-reason-snomed-ct-vs" /> </binding> </element> <element id="Dosage.asNeeded[x]:asNeededCodeableConcept.coding:snomed.system"> <path value="Dosage.asNeeded[x].coding.system" /> <min value="1" /> <mustSupport value="true" /> </element> <element id="Dosage.asNeeded[x]:asNeededCodeableConcept.coding:snomed.version"> <path value="Dosage.asNeeded[x].coding.version" /> <min value="1" /> <mustSupport value="true" /> </element> <element id="Dosage.asNeeded[x]:asNeededCodeableConcept.coding:snomed.code"> <path value="Dosage.asNeeded[x].coding.code" /> <min value="1" /> <mustSupport value="true" /> </element> <element id="Dosage.asNeeded[x]:asNeededCodeableConcept.coding:snomed.display"> <path value="Dosage.asNeeded[x].coding.display" /> <min value="1" /> <mustSupport value="true" /> </element> <element id="Dosage.asNeeded[x]:asNeededCodeableConcept.text"> <path value="Dosage.asNeeded[x].text" /> <definition value="Hier wird die Bedingung zur Verabreichung/Einnahme der Bedarfsmedikation als Freitext angegeben." /> <mustSupport value="true" /> </element> <element id="Dosage.site"> <path value="Dosage.site" /> <mustSupport value="true" /> </element> <element id="Dosage.site.coding"> <path value="Dosage.site.coding" /> <slicing> <discriminator> <type value="pattern" /> <path value="$this" /> </discriminator> <rules value="open" /> </slicing> <comment value="Das MustSupport gilt nur für die vordefinierten Slices." /> <mustSupport value="true" /> </element> <element id="Dosage.site.coding:snomed"> <path value="Dosage.site.coding" /> <sliceName value="snomed" /> <min value="0" /> <max value="1" /> <patternCoding> <system value="http://snomed.info/sct" /> </patternCoding> <mustSupport value="true" /> </element> <element id="Dosage.site.coding:snomed.system"> <path value="Dosage.site.coding.system" /> <min value="1" /> <mustSupport value="true" /> </element> <element id="Dosage.site.coding:snomed.version"> <path value="Dosage.site.coding.version" /> <min value="1" /> <mustSupport value="true" /> </element> <element id="Dosage.site.coding:snomed.code"> <path value="Dosage.site.coding.code" /> <min value="1" /> <mustSupport value="true" /> </element> <element id="Dosage.site.coding:snomed.display"> <path value="Dosage.site.coding.display" /> <min value="1" /> <mustSupport value="true" /> </element> <element id="Dosage.site.text"> <path value="Dosage.site.text" /> <mustSupport value="true" /> </element> <element id="Dosage.route"> <path value="Dosage.route" /> <mustSupport value="true" /> </element> <element id="Dosage.route.coding"> <path value="Dosage.route.coding" /> <slicing> <discriminator> <type value="pattern" /> <path value="$this" /> </discriminator> <rules value="open" /> </slicing> <comment value="Das MustSupport gilt nur für die vordefinierten Slices." /> <mustSupport value="true" /> </element> <element id="Dosage.route.coding:snomed"> <path value="Dosage.route.coding" /> <sliceName value="snomed" /> <min value="0" /> <max value="1" /> <patternCoding> <system value="http://snomed.info/sct" /> </patternCoding> <mustSupport value="true" /> <binding> <strength value="extensible" /> <valueSet value="https://gematik.de/fhir/terminology/ValueSet/epa-route-of-administration-snomed-ct-vs" /> </binding> </element> <element id="Dosage.route.coding:snomed.system"> <path value="Dosage.route.coding.system" /> <min value="1" /> <mustSupport value="true" /> </element> <element id="Dosage.route.coding:snomed.version"> <path value="Dosage.route.coding.version" /> <min value="1" /> <mustSupport value="true" /> </element> <element id="Dosage.route.coding:snomed.code"> <path value="Dosage.route.coding.code" /> <min value="1" /> <mustSupport value="true" /> </element> <element id="Dosage.route.coding:snomed.display"> <path value="Dosage.route.coding.display" /> <min value="1" /> <mustSupport value="true" /> </element> <element id="Dosage.route.coding:edqm"> <path value="Dosage.route.coding" /> <sliceName value="edqm" /> <min value="0" /> <max value="1" /> <mustSupport value="true" /> <binding> <strength value="required" /> <valueSet value="https://gematik.de/fhir/terminology/ValueSet/epa-medicine-route-of-administration-edqm-vs" /> </binding> </element> <element id="Dosage.route.coding:edqm.system"> <path value="Dosage.route.coding.system" /> <min value="1" /> <mustSupport value="true" /> </element> <element id="Dosage.route.coding:edqm.code"> <path value="Dosage.route.coding.code" /> <min value="1" /> <mustSupport value="true" /> </element> <element id="Dosage.route.coding:edqm.display"> <path value="Dosage.route.coding.display" /> <min value="1" /> <mustSupport value="true" /> </element> <element id="Dosage.route.text"> <path value="Dosage.route.text" /> <mustSupport value="true" /> </element> <element id="Dosage.doseAndRate"> <path value="Dosage.doseAndRate" /> <max value="1" /> <mustSupport value="true" /> </element> <element id="Dosage.doseAndRate.dose[x]"> <path value="Dosage.doseAndRate.dose[x]" /> <slicing> <discriminator> <type value="type" /> <path value="$this" /> </discriminator> <ordered value="false" /> <rules value="open" /> </slicing> <definition value="Hier kann die Dosierung einer Gabe bzw. Einnahme abgebildet werden. Dabei kann es sich um eine definierte Menge für eine Einnahme handeln (z.B. die Einnahme von 5 mg eines Wirkstoffs im Rahmen einer Einnahme) oder um einen definierten Mengenbereich (z.B. die Einnahme von 5 mg bis 10 mg eines Wirkstoffs im Rahmen einer Einnahme)." /> <mustSupport value="true" /> </element> <element id="Dosage.doseAndRate.dose[x]:doseQuantity"> <path value="Dosage.doseAndRate.dose[x]" /> <sliceName value="doseQuantity" /> <definition value="Hier wird die Dosiermenge mittels einer definierten Menge angegeben." /> <min value="0" /> <max value="1" /> <type> <code value="Quantity" /> <profile value="http://hl7.org/fhir/StructureDefinition/SimpleQuantity" /> </type> <mustSupport value="true" /> <binding> <strength value="preferred" /> <valueSet value="https://fhir.kbv.de/ValueSet/KBV_VS_SFHIR_BMP_DOSIEREINHEIT" /> </binding> </element> <element id="Dosage.doseAndRate.dose[x]:doseQuantity.value"> <path value="Dosage.doseAndRate.dose[x].value" /> <definition value="Hier wird die Menge des Arzneimittels angegeben, die verabreicht/eingenommen wird." /> <min value="1" /> <mustSupport value="true" /> </element> <element id="Dosage.doseAndRate.dose[x]:doseQuantity.unit"> <path value="Dosage.doseAndRate.dose[x].unit" /> <min value="1" /> <mustSupport value="true" /> </element> <element id="Dosage.doseAndRate.dose[x]:doseQuantity.system"> <path value="Dosage.doseAndRate.dose[x].system" /> <min value="1" /> <mustSupport value="true" /> </element> <element id="Dosage.doseAndRate.dose[x]:doseQuantity.code"> <path value="Dosage.doseAndRate.dose[x].code" /> <definition value="Hier wird die Dosiereinheit als Code angegeben. Hierbei sollte nach Möglichkeit folgendes ValueSet verwendet werden: https://fhir.kbv.de/ValueSet/KBV_VS_SFHIR_BMP_DOSIEREINHEIT." /> <min value="1" /> <mustSupport value="true" /> </element> <element id="Dosage.doseAndRate.dose[x]:doseRange"> <path value="Dosage.doseAndRate.dose[x]" /> <sliceName value="doseRange" /> <definition value="Hier wird die Dosiermenge mittels eines definierten Mengenbereichs angegeben." /> <min value="0" /> <max value="1" /> <type> <code value="Range" /> </type> <mustSupport value="true" /> </element> <element id="Dosage.doseAndRate.dose[x]:doseRange.low"> <path value="Dosage.doseAndRate.dose[x].low" /> <definition value="Hier wird die untere Grenze des definierten Mengenbereichs angegeben." /> <mustSupport value="true" /> <binding> <strength value="preferred" /> <valueSet value="https://fhir.kbv.de/ValueSet/KBV_VS_SFHIR_BMP_DOSIEREINHEIT" /> </binding> </element> <element id="Dosage.doseAndRate.dose[x]:doseRange.low.value"> <path value="Dosage.doseAndRate.dose[x].low.value" /> <definition value="Hier wird die Menge des Arzneimittels angegeben, die verabreicht/eingenommen wird." /> <min value="1" /> <mustSupport value="true" /> </element> <element id="Dosage.doseAndRate.dose[x]:doseRange.low.unit"> <path value="Dosage.doseAndRate.dose[x].low.unit" /> <min value="1" /> <mustSupport value="true" /> </element> <element id="Dosage.doseAndRate.dose[x]:doseRange.low.system"> <path value="Dosage.doseAndRate.dose[x].low.system" /> <min value="1" /> <mustSupport value="true" /> </element> <element id="Dosage.doseAndRate.dose[x]:doseRange.low.code"> <path value="Dosage.doseAndRate.dose[x].low.code" /> <definition value="Hier wird die Dosiereinheit als Code angegeben. Hierbei sollte nach Möglichkeit folgendes ValueSet verwendet werden: https://fhir.kbv.de/ValueSet/KBV_VS_SFHIR_BMP_DOSIEREINHEIT." /> <min value="1" /> <mustSupport value="true" /> </element> <element id="Dosage.doseAndRate.dose[x]:doseRange.high"> <path value="Dosage.doseAndRate.dose[x].high" /> <definition value="Hier wird die obere Grenze des definierten Mengenbereichs angegeben." /> <mustSupport value="true" /> <binding> <strength value="preferred" /> <valueSet value="https://fhir.kbv.de/ValueSet/KBV_VS_SFHIR_BMP_DOSIEREINHEIT" /> </binding> </element> <element id="Dosage.doseAndRate.dose[x]:doseRange.high.value"> <path value="Dosage.doseAndRate.dose[x].high.value" /> <definition value="Hier wird die Menge des Arzneimittels angegeben, die verabreicht/eingenommen wird." /> <min value="1" /> <mustSupport value="true" /> </element> <element id="Dosage.doseAndRate.dose[x]:doseRange.high.unit"> <path value="Dosage.doseAndRate.dose[x].high.unit" /> <min value="1" /> <mustSupport value="true" /> </element> <element id="Dosage.doseAndRate.dose[x]:doseRange.high.system"> <path value="Dosage.doseAndRate.dose[x].high.system" /> <min value="1" /> <mustSupport value="true" /> </element> <element id="Dosage.doseAndRate.dose[x]:doseRange.high.code"> <path value="Dosage.doseAndRate.dose[x].high.code" /> <definition value="Hier wird die Dosiereinheit als Code angegeben. Hierbei sollte nach Möglichkeit folgendes ValueSet verwendet werden: https://fhir.kbv.de/ValueSet/KBV_VS_SFHIR_BMP_DOSIEREINHEIT." /> <min value="1" /> <mustSupport value="true" /> </element> <element id="Dosage.doseAndRate.rate[x]"> <path value="Dosage.doseAndRate.rate[x]" /> <slicing> <discriminator> <type value="type" /> <path value="$this" /> </discriminator> <ordered value="false" /> <rules value="open" /> </slicing> <definition value="Hier kann die Dosierung einer Rate über einen bestimmten Zeitraum abgebildet werden. Ein Beispiel dafür wäre die Rate einer Infusionslösung. Dabei kann entweder eine konkrete Verabreichungsgeschwindigkeit (z.B. eine Infusionslösung, welche mit 50 ml/h oder 100 mg/h verabreicht wird) oder ein Bereich für eine Verabreichungsgeschwindigkeit definiert werden (z.B. die Gabe einer Infusionslösung, welche mit 100 ml/h bis 150 mg/h verabreicht wird)." /> <mustSupport value="true" /> </element> <element id="Dosage.doseAndRate.rate[x]:rateRange"> <path value="Dosage.doseAndRate.rate[x]" /> <sliceName value="rateRange" /> <definition value="Hier kann der Bereich für eine Rate/Verabreichungsgeschwindigkeit angegeben werden, mit welcher ein Arzneimittel verabreicht wird. **Beispiel:** * Eine Infusionslösung kann mit einer Geschwindigkeit von 100 ml/h (Untergrenze) bis 120 ml/h (Obergrenze) verabreicht werden." /> <min value="0" /> <max value="1" /> <type> <code value="Range" /> </type> <mustSupport value="true" /> </element> <element id="Dosage.doseAndRate.rate[x]:rateRange.low"> <path value="Dosage.doseAndRate.rate[x].low" /> <definition value="Hier wird die untere Grenze des definierten Mengenbereichs angegeben." /> <mustSupport value="true" /> </element> <element id="Dosage.doseAndRate.rate[x]:rateRange.low.value"> <path value="Dosage.doseAndRate.rate[x].low.value" /> <definition value="Hier wird die Menge angegeben, die über einen bestimmten Zeitraum verabreicht wird." /> <min value="1" /> <mustSupport value="true" /> </element> <element id="Dosage.doseAndRate.rate[x]:rateRange.low.unit"> <path value="Dosage.doseAndRate.rate[x].low.unit" /> <min value="1" /> <mustSupport value="true" /> </element> <element id="Dosage.doseAndRate.rate[x]:rateRange.low.system"> <path value="Dosage.doseAndRate.rate[x].low.system" /> <min value="1" /> <mustSupport value="true" /> </element> <element id="Dosage.doseAndRate.rate[x]:rateRange.low.code"> <path value="Dosage.doseAndRate.rate[x].low.code" /> <definition value="Hier wird die Einheit der Rate/Verabreichungsgeschwingigkeit als Code angegeben." /> <min value="1" /> <mustSupport value="true" /> </element> <element id="Dosage.doseAndRate.rate[x]:rateRange.high"> <path value="Dosage.doseAndRate.rate[x].high" /> <definition value="Hier wird die obere Grenze des definierten Mengenbereichs angegeben." /> <mustSupport value="true" /> </element> <element id="Dosage.doseAndRate.rate[x]:rateRange.high.value"> <path value="Dosage.doseAndRate.rate[x].high.value" /> <definition value="Hier wird die Menge angegeben, die über einen bestimmten Zeitraum verabreicht wird." /> <min value="1" /> <mustSupport value="true" /> </element> <element id="Dosage.doseAndRate.rate[x]:rateRange.high.unit"> <path value="Dosage.doseAndRate.rate[x].high.unit" /> <min value="1" /> <mustSupport value="true" /> </element> <element id="Dosage.doseAndRate.rate[x]:rateRange.high.system"> <path value="Dosage.doseAndRate.rate[x].high.system" /> <min value="1" /> <mustSupport value="true" /> </element> <element id="Dosage.doseAndRate.rate[x]:rateRange.high.code"> <path value="Dosage.doseAndRate.rate[x].high.code" /> <definition value="Hier wird die Einheit der Rate/Verabreichungsgeschwingigkeit als Code angegeben." /> <min value="1" /> <mustSupport value="true" /> </element> <element id="Dosage.doseAndRate.rate[x]:rateQuantity"> <path value="Dosage.doseAndRate.rate[x]" /> <sliceName value="rateQuantity" /> <definition value="Hier wird die Rate/Verabreichungsgeschwindigkeit in Form einer festen Angabe abgebildet. Dabei wird die Geschwindigkeit bzw. Flussrate, mit der das Arzneimittel verabreicht wird, mit Hilfe einer kombinierten Einheit abgebildet (z.B. ml/h). **Beispiele für eine Flussrate mit einer kombinierten Einheit:** * 1 Milliliter pro Stunde (1 ml/h) * 1 Milligramm pro Stunde (1 mg/h)" /> <min value="0" /> <max value="1" /> <type> <code value="Quantity" /> <profile value="http://hl7.org/fhir/StructureDefinition/SimpleQuantity" /> </type> <mustSupport value="true" /> </element> <element id="Dosage.doseAndRate.rate[x]:rateQuantity.value"> <path value="Dosage.doseAndRate.rate[x].value" /> <definition value="Hier wird die Menge angegeben, die über einen bestimmten Zeitraum verabreicht wird." /> <min value="1" /> <mustSupport value="true" /> </element> <element id="Dosage.doseAndRate.rate[x]:rateQuantity.unit"> <path value="Dosage.doseAndRate.rate[x].unit" /> <definition value="Hier wird die Einheit der Rate/Verabreichungsgeschwingigkeit in menschenlesbarer Sprache angegeben." /> <min value="1" /> <mustSupport value="true" /> </element> <element id="Dosage.doseAndRate.rate[x]:rateQuantity.system"> <path value="Dosage.doseAndRate.rate[x].system" /> <min value="1" /> <mustSupport value="true" /> </element> <element id="Dosage.doseAndRate.rate[x]:rateQuantity.code"> <path value="Dosage.doseAndRate.rate[x].code" /> <definition value="Hier wird die Einheit der Rate/Verabreichungsgeschwingigkeit als Code angegeben." /> <min value="1" /> <mustSupport value="true" /> </element> <element id="Dosage.doseAndRate.rate[x]:rateRatio"> <path value="Dosage.doseAndRate.rate[x]" /> <sliceName value="rateRatio" /> <definition value="Hier wird die Rate/Verabreichungsgeschwindigkeit in Form einer festen Angabe abgebildet. Dabei wird die Geschwindigkeit bzw. Flussrate, mit der das Arzneimittel verabreicht wird, mit Hilfe einer Einheit abgebildet, in der Zähler (z.B. 1 ml) und Nenner (z.B. 1 h) einzeln abgebildet werden. **Beispiele für eine Flussrate mit Angabe von Zähler und Nenner:** * 1 Mililiter pro 1 Stunde (1ml / 1h) * 1 Milligramm pro 1 Stunde (1mg / 1h)" /> <min value="0" /> <max value="1" /> <type> <code value="Ratio" /> </type> <mustSupport value="true" /> </element> <element id="Dosage.doseAndRate.rate[x]:rateRatio.numerator"> <path value="Dosage.doseAndRate.rate[x].numerator" /> <definition value="Hier wird der Zähler einer Verabreichungsgeschwindigkeit bzw. Flussrate angegeben. Dieser besteht aus einem Wert und einer Einheit (bevorzugt eine Volumeneinheit oder eine Gewichtseinheit). **Beispiele für den Zähler einer Verabreichungsgeschwindigkeit:** * 10 Milliliter (10 ml) * 5 Milligramm (5 mg)" /> <min value="1" /> <mustSupport value="true" /> <binding> <strength value="preferred" /> <valueSet value="https://fhir.kbv.de/ValueSet/KBV_VS_SFHIR_BMP_DOSIEREINHEIT" /> </binding> </element> <element id="Dosage.doseAndRate.rate[x]:rateRatio.numerator.value"> <path value="Dosage.doseAndRate.rate[x].numerator.value" /> <definition value="Hier wird die Menge angegeben, die über einen bestimmten Zeitraum verabreicht wird." /> <min value="1" /> <mustSupport value="true" /> </element> <element id="Dosage.doseAndRate.rate[x]:rateRatio.numerator.unit"> <path value="Dosage.doseAndRate.rate[x].numerator.unit" /> <min value="1" /> <mustSupport value="true" /> </element> <element id="Dosage.doseAndRate.rate[x]:rateRatio.numerator.system"> <path value="Dosage.doseAndRate.rate[x].numerator.system" /> <min value="1" /> <mustSupport value="true" /> </element> <element id="Dosage.doseAndRate.rate[x]:rateRatio.numerator.code"> <path value="Dosage.doseAndRate.rate[x].numerator.code" /> <definition value="Hier wird die Dosiereinheit als Code angegeben. Hierbei sollte nach Möglichkeit folgendes ValueSet verwendet werden: https://fhir.kbv.de/ValueSet/KBV_VS_SFHIR_BMP_DOSIEREINHEIT." /> <min value="1" /> <mustSupport value="true" /> </element> <element id="Dosage.doseAndRate.rate[x]:rateRatio.denominator"> <path value="Dosage.doseAndRate.rate[x].denominator" /> <definition value="Hier wird der Nenner einer Verabreichungsgeschwindigkeit bzw. Flussrate angegeben. Dieser entspricht einer Zeitspanne. **Beispiele für den Nenner einer Verabreichungsgeschwindigkeit:** * 3 Stunden (3h) * 1 Tag (1d)" /> <min value="1" /> <mustSupport value="true" /> <binding> <strength value="required" /> <valueSet value="http://hl7.org/fhir/ValueSet/units-of-time" /> </binding> </element> <element id="Dosage.doseAndRate.rate[x]:rateRatio.denominator.value"> <path value="Dosage.doseAndRate.rate[x].denominator.value" /> <definition value="Hier wird die Menge angegeben, die über einen bestimmten Zeitraum verabreicht wird." /> <min value="1" /> <mustSupport value="true" /> </element> <element id="Dosage.doseAndRate.rate[x]:rateRatio.denominator.unit"> <path value="Dosage.doseAndRate.rate[x].denominator.unit" /> <min value="1" /> <mustSupport value="true" /> </element> <element id="Dosage.doseAndRate.rate[x]:rateRatio.denominator.system"> <path value="Dosage.doseAndRate.rate[x].denominator.system" /> <min value="1" /> <mustSupport value="true" /> </element> <element id="Dosage.doseAndRate.rate[x]:rateRatio.denominator.code"> <path value="Dosage.doseAndRate.rate[x].denominator.code" /> <definition value="Hier wird die Dosiereinheit als Code angegeben. Hierbei sollte nach Möglichkeit folgendes ValueSet verwendet werden: https://fhir.kbv.de/ValueSet/KBV_VS_SFHIR_BMP_DOSIEREINHEIT." /> <min value="1" /> <mustSupport value="true" /> </element> <element id="Dosage.maxDosePerPeriod"> <path value="Dosage.maxDosePerPeriod" /> <definition value="Hier wird die maximale Dosis angegeben, die in einer bestimmten Zeitspanne verabreicht werden darf. Bei kombinierten Dauer- und Bedarfsmedikationen ("zusätzlich bei Bedarf") wird über dieses Element die maximale Gesamtdosis der Einnahme/Verabreichung von Arzneimitteln mit gleichem Wirkstoff oder aus der gleichen Wirkstoffgruppe abgebildet." /> <mustSupport value="true" /> </element> <element id="Dosage.maxDosePerPeriod.numerator"> <path value="Dosage.maxDosePerPeriod.numerator" /> <definition value="Hier wird die Menge abgebildet. Dieser Wert entspricht dem Wert im Zähler der Angabe "Maximale Menge pro Gabe"." /> <min value="1" /> <mustSupport value="true" /> <binding> <strength value="preferred" /> <valueSet value="https://fhir.kbv.de/ValueSet/KBV_VS_SFHIR_BMP_DOSIEREINHEIT" /> </binding> </element> <element id="Dosage.maxDosePerPeriod.numerator.value"> <path value="Dosage.maxDosePerPeriod.numerator.value" /> <definition value="Hier wird die Menge des Arzneimittels angegeben, die maximal innerhalb der Zeitspanne verabreicht/eingenommen werden darf." /> <min value="1" /> <mustSupport value="true" /> </element> <element id="Dosage.maxDosePerPeriod.numerator.unit"> <path value="Dosage.maxDosePerPeriod.numerator.unit" /> <min value="1" /> <mustSupport value="true" /> </element> <element id="Dosage.maxDosePerPeriod.numerator.system"> <path value="Dosage.maxDosePerPeriod.numerator.system" /> <min value="1" /> <mustSupport value="true" /> </element> <element id="Dosage.maxDosePerPeriod.numerator.code"> <path value="Dosage.maxDosePerPeriod.numerator.code" /> <definition value="Hier wird die Dosiereinheit als Code angegeben. Hierbei sollte nach Möglichkeit folgendes ValueSet verwendet werden: https://fhir.kbv.de/ValueSet/KBV_VS_SFHIR_BMP_DOSIEREINHEIT." /> <min value="1" /> <mustSupport value="true" /> </element> <element id="Dosage.maxDosePerPeriod.denominator"> <path value="Dosage.maxDosePerPeriod.denominator" /> <definition value="Hier wird die Zeitspanne angegeben. Dieser Wert entspricht dem Wert im Nenner der Angabe "Maximale Menge pro Gabe"." /> <min value="1" /> <mustSupport value="true" /> <binding> <strength value="required" /> <valueSet value="http://hl7.org/fhir/ValueSet/units-of-time" /> </binding> </element> <element id="Dosage.maxDosePerPeriod.denominator.value"> <path value="Dosage.maxDosePerPeriod.denominator.value" /> <definition value="Hier wird der Wert der Zeitspanne angegeben, innerhalb der die definierte Menge des Arzneimittels maximal verabreicht/eingenommen werden darf." /> <min value="1" /> <mustSupport value="true" /> </element> <element id="Dosage.maxDosePerPeriod.denominator.unit"> <path value="Dosage.maxDosePerPeriod.denominator.unit" /> <min value="1" /> <mustSupport value="true" /> </element> <element id="Dosage.maxDosePerPeriod.denominator.system"> <path value="Dosage.maxDosePerPeriod.denominator.system" /> <min value="1" /> <mustSupport value="true" /> </element> <element id="Dosage.maxDosePerPeriod.denominator.code"> <path value="Dosage.maxDosePerPeriod.denominator.code" /> <definition value="Hier wird die Zeiteinheit als Code angegeben." /> <min value="1" /> <mustSupport value="true" /> </element> <element id="Dosage.maxDosePerAdministration"> <path value="Dosage.maxDosePerAdministration" /> <definition value="Hier wird die Dosiermenge mittels einer maximalen Menge angegeben." /> <mustSupport value="true" /> <binding> <strength value="preferred" /> <valueSet value="https://fhir.kbv.de/ValueSet/KBV_VS_SFHIR_BMP_DOSIEREINHEIT" /> </binding> </element> <element id="Dosage.maxDosePerAdministration.value"> <path value="Dosage.maxDosePerAdministration.value" /> <definition value="Hier wird die Menge des Arzneimittels angegeben, die verabreicht/eingenommen wird." /> <min value="1" /> <mustSupport value="true" /> </element> <element id="Dosage.maxDosePerAdministration.unit"> <path value="Dosage.maxDosePerAdministration.unit" /> <min value="1" /> <mustSupport value="true" /> </element> <element id="Dosage.maxDosePerAdministration.system"> <path value="Dosage.maxDosePerAdministration.system" /> <min value="1" /> <mustSupport value="true" /> </element> <element id="Dosage.maxDosePerAdministration.code"> <path value="Dosage.maxDosePerAdministration.code" /> <definition value="Hier wird die Dosiereinheit als Code angegeben. Hierbei sollte nach Möglichkeit folgendes ValueSet verwendet werden: https://fhir.kbv.de/ValueSet/KBV_VS_SFHIR_BMP_DOSIEREINHEIT." /> <min value="1" /> <mustSupport value="true" /> </element> </differential> </StructureDefinition>