{ "resourceType": "StructureDefinition", "id": "epa-dosage", "url": "https://gematik.de/fhir/epa-medication/StructureDefinition/epa-dosage", "version": "1.1.1", "name": "EPADosage", "title": "EPA Dosage", "status": "active", "experimental": false, "date": "2024-08-14", "publisher": "mio42 GmbH", "description": "Hier werden Informationen zur Dosierung angegeben.", "fhirVersion": "4.0.1", "kind": "complex-type", "abstract": false, "type": "Dosage", "baseDefinition": "http://hl7.org/fhir/StructureDefinition/Dosage", "derivation": "constraint", "snapshot": { "element": [ { "id": "Dosage", "path": "Dosage", "short": "How the medication is/was taken or should be taken", "definition": "Indicates how the medication is/was taken or should be taken by the patient.", "min": 0, "max": "*", "base": { "path": "Dosage", "min": 0, "max": "*" }, "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "rim", "map": ".outboundRelationship[typeCode=COMP].target[classCode=SBADM, moodCode=INT]" } ] }, { "id": "Dosage.id", "path": "Dosage.id", "representation": [ "xmlAttr" ], "short": "Unique id for inter-element referencing", "definition": "Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.", "min": 0, "max": "1", "base": { "path": "Element.id", "min": 0, "max": "1" }, "type": [ { "extension": [ { "url": "http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type", "valueUrl": "string" } ], "code": "http://hl7.org/fhirpath/System.String" } ], "mapping": [ { "identity": "rim", "map": "n/a" } ] }, { "id": "Dosage.extension", "path": "Dosage.extension", "slicing": { "discriminator": [ { "type": "value", "path": "url" } ], "description": "Extensions are always sliced by (at least) url", "rules": "open" }, "short": "Additional content defined by implementations", "definition": "May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.", "comment": "There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.", "alias": [ "extensions", "user content" ], "min": 0, "max": "*", "base": { "path": "Element.extension", "min": 0, "max": "*" }, "type": [ { "code": "Extension" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" }, { "key": "ext-1", "severity": "error", "human": "Must have either extensions or value[x], not both", "expression": "extension.exists() != value.exists()", "xpath": "exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])", "source": "http://hl7.org/fhir/StructureDefinition/Extension" } ], "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "rim", "map": "N/A" } ] }, { "id": "Dosage.modifierExtension", "path": "Dosage.modifierExtension", "short": "Extensions that cannot be ignored even if unrecognized", "definition": "May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.\n\nModifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).", "comment": "There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.", "requirements": "Modifier extensions allow for extensions that *cannot* be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the [definition of modifier extensions](extensibility.html#modifierExtension).", "alias": [ "extensions", "user content", "modifiers" ], "min": 0, "max": "*", "base": { "path": "BackboneElement.modifierExtension", "min": 0, "max": "*" }, "type": [ { "code": "Extension" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" }, { "key": "ext-1", "severity": "error", "human": "Must have either extensions or value[x], not both", "expression": "extension.exists() != value.exists()", "xpath": "exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])", "source": "http://hl7.org/fhir/StructureDefinition/Extension" } ], "isModifier": true, "isModifierReason": "Modifier extensions are expected to modify the meaning or interpretation of the element that contains them", "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "rim", "map": "N/A" } ] }, { "id": "Dosage.sequence", "path": "Dosage.sequence", "short": "The order of the dosage instructions", "definition": "Indicates the order in which the dosage instructions should be applied or interpreted.", "comment": "32 bit number; for values larger than this, use decimal", "requirements": "If the sequence number of multiple Dosages is the same, then it is implied that the instructions are to be treated as concurrent. If the sequence number is different, then the Dosages are intended to be sequential.", "min": 0, "max": "1", "base": { "path": "Dosage.sequence", "min": 0, "max": "1" }, "type": [ { "code": "integer" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "TQ1-1" }, { "identity": "rim", "map": ".text" } ] }, { "id": "Dosage.text", "path": "Dosage.text", "short": "Free text dosage instructions e.g. SIG", "definition": "Hier kann die Dosieranweisung in Form eines Freitextes abgebildet werden.", "comment": "Note that FHIR strings SHALL NOT exceed 1MB in size", "requirements": "Free text dosage instructions can be used for cases where the instructions are too complex to code. The content of this attribute does not include the name or description of the medication. When coded instructions are present, the free text instructions may still be present for display to humans taking or administering the medication. It is expected that the text instructions will always be populated. If the dosage.timing attribute is also populated, then the dosage.text should reflect the same information as the timing. Additional information about administration or preparation of the medication should be included as text.", "min": 0, "max": "1", "base": { "path": "Dosage.text", "min": 0, "max": "1" }, "type": [ { "code": "string" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "RXO-6; RXE-21" }, { "identity": "rim", "map": ".text" } ] }, { "id": "Dosage.additionalInstruction", "path": "Dosage.additionalInstruction", "short": "Supplemental instruction or warnings to the patient - e.g. \"with meals\", \"may cause drowsiness\"", "definition": "Hier wird eine ergänzende Anweisung anhand eines entsprechenden Codes oder alternativ mit einem Freitext angegeben.", "comment": "Information about administration or preparation of the medication (e.g. \"infuse as rapidly as possibly via intraperitoneal port\" or \"immediately following drug x\") should be populated in dosage.text.", "requirements": "Additional instruction is intended to be coded, but where no code exists, the element could include text. For example, \"Swallow with plenty of water\" which might or might not be coded.", "min": 0, "max": "*", "base": { "path": "Dosage.additionalInstruction", "min": 0, "max": "*" }, "type": [ { "code": "CodeableConcept" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "binding": { "extension": [ { "url": "http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName", "valueString": "AdditionalInstruction" } ], "strength": "example", "description": "A coded concept identifying additional instructions such as \"take with water\" or \"avoid operating heavy machinery\".", "valueSet": "http://hl7.org/fhir/ValueSet/additional-instruction-codes" }, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "CE/CNE/CWE" }, { "identity": "rim", "map": "CD" }, { "identity": "orim", "map": "fhir:CodeableConcept rdfs:subClassOf dt:CD" }, { "identity": "v2", "map": "RXO-7" }, { "identity": "rim", "map": ".text" } ] }, { "id": "Dosage.additionalInstruction.id", "path": "Dosage.additionalInstruction.id", "representation": [ "xmlAttr" ], "short": "Unique id for inter-element referencing", "definition": "Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.", "min": 0, "max": "1", "base": { "path": "Element.id", "min": 0, "max": "1" }, "type": [ { "extension": [ { "url": "http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type", "valueUrl": "string" } ], "code": "http://hl7.org/fhirpath/System.String" } ], "mapping": [ { "identity": "rim", "map": "n/a" } ] }, { "id": "Dosage.additionalInstruction.extension", "path": "Dosage.additionalInstruction.extension", "slicing": { "discriminator": [ { "type": "value", "path": "url" } ], "description": "Extensions are always sliced by (at least) url", "rules": "open" }, "short": "Additional content defined by implementations", "definition": "May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.", "comment": "There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.", "alias": [ "extensions", "user content" ], "min": 0, "max": "*", "base": { "path": "Element.extension", "min": 0, "max": "*" }, "type": [ { "code": "Extension" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" }, { "key": "ext-1", "severity": "error", "human": "Must have either extensions or value[x], not both", "expression": "extension.exists() != value.exists()", "xpath": "exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])", "source": "http://hl7.org/fhir/StructureDefinition/Extension" } ], "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "rim", "map": "N/A" } ] }, { "id": "Dosage.additionalInstruction.coding", "path": "Dosage.additionalInstruction.coding", "slicing": { "discriminator": [ { "type": "pattern", "path": "$this" } ], "rules": "open" }, "short": "Code defined by a terminology system", "definition": "Hier werden Codes angegeben.", "comment": "Das MustSupport gilt nur für die vordefinierten Slices.", "requirements": "Allows for alternative encodings within a code system, and translations to other code systems.", "min": 0, "max": "*", "base": { "path": "CodeableConcept.coding", "min": 0, "max": "*" }, "type": [ { "code": "Coding" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "CE/CNE/CWE subset one of the sets of component 1-3 or 4-6" }, { "identity": "rim", "map": "CV" }, { "identity": "orim", "map": "fhir:Coding rdfs:subClassOf dt:CDCoding" }, { "identity": "v2", "map": "C*E.1-8, C*E.10-22" }, { "identity": "rim", "map": "union(., ./translation)" }, { "identity": "orim", "map": "fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding" } ] }, { "id": "Dosage.additionalInstruction.coding:snomed", "path": "Dosage.additionalInstruction.coding", "sliceName": "snomed", "short": "Code defined by a terminology system", "definition": "A reference to a code defined by a terminology system.", "comment": "Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.", "requirements": "Allows for alternative encodings within a code system, and translations to other code systems.", "min": 0, "max": "1", "base": { "path": "CodeableConcept.coding", "min": 0, "max": "*" }, "type": [ { "code": "Coding" } ], "patternCoding": { "system": "http://snomed.info/sct" }, "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "binding": { "strength": "extensible", "valueSet": "https://gematik.de/fhir/terminology/ValueSet/epa-additional-dosage-instructions-snomed-ct-vs" }, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "CE/CNE/CWE subset one of the sets of component 1-3 or 4-6" }, { "identity": "rim", "map": "CV" }, { "identity": "orim", "map": "fhir:Coding rdfs:subClassOf dt:CDCoding" }, { "identity": "v2", "map": "C*E.1-8, C*E.10-22" }, { "identity": "rim", "map": "union(., ./translation)" }, { "identity": "orim", "map": "fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding" } ] }, { "id": "Dosage.additionalInstruction.coding:snomed.id", "path": "Dosage.additionalInstruction.coding.id", "representation": [ "xmlAttr" ], "short": "Unique id for inter-element referencing", "definition": "Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.", "min": 0, "max": "1", "base": { "path": "Element.id", "min": 0, "max": "1" }, "type": [ { "extension": [ { "url": "http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type", "valueUrl": "string" } ], "code": "http://hl7.org/fhirpath/System.String" } ], "mapping": [ { "identity": "rim", "map": "n/a" } ] }, { "id": "Dosage.additionalInstruction.coding:snomed.extension", "path": "Dosage.additionalInstruction.coding.extension", "slicing": { "discriminator": [ { "type": "value", "path": "url" } ], "description": "Extensions are always sliced by (at least) url", "rules": "open" }, "short": "Additional content defined by implementations", "definition": "May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.", "comment": "There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.", "alias": [ "extensions", "user content" ], "min": 0, "max": "*", "base": { "path": "Element.extension", "min": 0, "max": "*" }, "type": [ { "code": "Extension" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" }, { "key": "ext-1", "severity": "error", "human": "Must have either extensions or value[x], not both", "expression": "extension.exists() != value.exists()", "xpath": "exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])", "source": "http://hl7.org/fhir/StructureDefinition/Extension" } ], "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "rim", "map": "N/A" } ] }, { "id": "Dosage.additionalInstruction.coding:snomed.system", "path": "Dosage.additionalInstruction.coding.system", "short": "Identity of the terminology system", "definition": "The identification of the code system that defines the meaning of the symbol in the code.", "comment": "The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously.", "requirements": "Need to be unambiguous about the source of the definition of the symbol.", "min": 1, "max": "1", "base": { "path": "Coding.system", "min": 0, "max": "1" }, "type": [ { "code": "uri" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "C*E.3" }, { "identity": "rim", "map": "./codeSystem" }, { "identity": "orim", "map": "fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem" } ] }, { "id": "Dosage.additionalInstruction.coding:snomed.version", "path": "Dosage.additionalInstruction.coding.version", "short": "Version of the system - if relevant", "definition": "The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.", "comment": "Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.", "min": 1, "max": "1", "base": { "path": "Coding.version", "min": 0, "max": "1" }, "type": [ { "code": "string" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "C*E.7" }, { "identity": "rim", "map": "./codeSystemVersion" }, { "identity": "orim", "map": "fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion" } ] }, { "id": "Dosage.additionalInstruction.coding:snomed.code", "path": "Dosage.additionalInstruction.coding.code", "short": "Symbol in syntax defined by the system", "definition": "A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).", "comment": "Note that FHIR strings SHALL NOT exceed 1MB in size", "requirements": "Need to refer to a particular code in the system.", "min": 1, "max": "1", "base": { "path": "Coding.code", "min": 0, "max": "1" }, "type": [ { "code": "code" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "C*E.1" }, { "identity": "rim", "map": "./code" }, { "identity": "orim", "map": "fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code" } ] }, { "id": "Dosage.additionalInstruction.coding:snomed.display", "extension": [ { "url": "http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable", "valueBoolean": true } ], "path": "Dosage.additionalInstruction.coding.display", "short": "Representation defined by the system", "definition": "A representation of the meaning of the code in the system, following the rules of the system.", "comment": "Note that FHIR strings SHALL NOT exceed 1MB in size", "requirements": "Need to be able to carry a human-readable meaning of the code for readers that do not know the system.", "min": 1, "max": "1", "base": { "path": "Coding.display", "min": 0, "max": "1" }, "type": [ { "code": "string" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "C*E.2 - but note this is not well followed" }, { "identity": "rim", "map": "CV.displayName" }, { "identity": "orim", "map": "fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName" } ] }, { "id": "Dosage.additionalInstruction.coding:snomed.userSelected", "path": "Dosage.additionalInstruction.coding.userSelected", "short": "If this coding was chosen directly by the user", "definition": "Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).", "comment": "Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.", "requirements": "This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.", "min": 0, "max": "1", "base": { "path": "Coding.userSelected", "min": 0, "max": "1" }, "type": [ { "code": "boolean" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "Sometimes implied by being first" }, { "identity": "rim", "map": "CD.codingRationale" }, { "identity": "orim", "map": "fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\\#true a [ fhir:source \"true\"; fhir:target dt:CDCoding.codingRationale\\#O ]" } ] }, { "id": "Dosage.additionalInstruction.text", "extension": [ { "url": "http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable", "valueBoolean": true } ], "path": "Dosage.additionalInstruction.text", "short": "Plain text representation of the concept", "definition": "Hier wird ein Freitext eingetragen.", "comment": "Very often the text is the same as a displayName of one of the codings.", "requirements": "The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.", "min": 0, "max": "1", "base": { "path": "CodeableConcept.text", "min": 0, "max": "1" }, "type": [ { "code": "string" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "C*E.9. But note many systems use C*E.2 for this" }, { "identity": "rim", "map": "./originalText[mediaType/code=\"text/plain\"]/data" }, { "identity": "orim", "map": "fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText" } ] }, { "id": "Dosage.patientInstruction", "path": "Dosage.patientInstruction", "short": "Patient or consumer oriented instructions", "definition": "Hier können Hinweise zu Anwendung, Lagerung, Einnahme, etc. bzw. eine Gebrauchsanweisung in patientenverständlicher Sprache abgebildet werden.", "comment": "Note that FHIR strings SHALL NOT exceed 1MB in size", "min": 0, "max": "1", "base": { "path": "Dosage.patientInstruction", "min": 0, "max": "1" }, "type": [ { "code": "string" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "RXO-7" }, { "identity": "rim", "map": ".text" } ] }, { "id": "Dosage.timing", "path": "Dosage.timing", "short": "When medication should be administered", "definition": "When medication should be administered.", "comment": "This attribute might not always be populated while the Dosage.text is expected to be populated. If both are populated, then the Dosage.text should reflect the content of the Dosage.timing.", "requirements": "The timing schedule for giving the medication to the patient. This data type allows many different expressions. For example: \"Every 8 hours\"; \"Three times a day\"; \"1/2 an hour before breakfast for 10 days from 23-Dec 2011:\"; \"15 Oct 2013, 17 Oct 2013 and 1 Nov 2013\". Sometimes, a rate can imply duration when expressed as total volume / duration (e.g. 500mL/2 hours implies a duration of 2 hours). However, when rate doesn't imply duration (e.g. 250mL/hour), then the timing.repeat.duration is needed to convey the infuse over time period.", "min": 0, "max": "1", "base": { "path": "Dosage.timing", "min": 0, "max": "1" }, "type": [ { "code": "Timing" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "N/A" }, { "identity": "rim", "map": "QSET (GTS)" }, { "identity": "rim", "map": ".effectiveTime" } ] }, { "id": "Dosage.timing.id", "path": "Dosage.timing.id", "representation": [ "xmlAttr" ], "short": "Unique id for inter-element referencing", "definition": "Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.", "min": 0, "max": "1", "base": { "path": "Element.id", "min": 0, "max": "1" }, "type": [ { "extension": [ { "url": "http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type", "valueUrl": "string" } ], "code": "http://hl7.org/fhirpath/System.String" } ], "mapping": [ { "identity": "rim", "map": "n/a" } ] }, { "id": "Dosage.timing.extension", "path": "Dosage.timing.extension", "slicing": { "discriminator": [ { "type": "value", "path": "url" } ], "description": "Extensions are always sliced by (at least) url", "rules": "open" }, "short": "Additional content defined by implementations", "definition": "May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.", "comment": "There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.", "alias": [ "extensions", "user content" ], "min": 0, "max": "*", "base": { "path": "Element.extension", "min": 0, "max": "*" }, "type": [ { "code": "Extension" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" }, { "key": "ext-1", "severity": "error", "human": "Must have either extensions or value[x], not both", "expression": "extension.exists() != value.exists()", "xpath": "exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])", "source": "http://hl7.org/fhir/StructureDefinition/Extension" } ], "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "rim", "map": "N/A" } ] }, { "id": "Dosage.timing.modifierExtension", "path": "Dosage.timing.modifierExtension", "short": "Extensions that cannot be ignored even if unrecognized", "definition": "May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.\n\nModifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).", "comment": "There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.", "requirements": "Modifier extensions allow for extensions that *cannot* be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the [definition of modifier extensions](extensibility.html#modifierExtension).", "alias": [ "extensions", "user content", "modifiers" ], "min": 0, "max": "*", "base": { "path": "BackboneElement.modifierExtension", "min": 0, "max": "*" }, "type": [ { "code": "Extension" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" }, { "key": "ext-1", "severity": "error", "human": "Must have either extensions or value[x], not both", "expression": "extension.exists() != value.exists()", "xpath": "exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])", "source": "http://hl7.org/fhir/StructureDefinition/Extension" } ], "isModifier": true, "isModifierReason": "Modifier extensions are expected to modify the meaning or interpretation of the element that contains them", "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "rim", "map": "N/A" } ] }, { "id": "Dosage.timing.event", "path": "Dosage.timing.event", "short": "When the event occurs", "definition": "Hier kann ein Zeitpunkt einer Verabreichung/Einnahme abgebildet werden.", "requirements": "In a Medication Administration Record, for instance, you need to take a general specification, and turn it into a precise specification.", "min": 0, "max": "*", "base": { "path": "Timing.event", "min": 0, "max": "*" }, "type": [ { "code": "dateTime" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "rim", "map": "QLIST" } ] }, { "id": "Dosage.timing.repeat", "path": "Dosage.timing.repeat", "short": "When the event is to occur", "definition": "Hier kann angegeben werden, über welche Zeitspanne eine einzelne Verabreichung/Einnahme durchgeführt wird. Dabei müssen stets Wert und Einheit der Zeitspanne angegeben werden. Optional kann zusätzlich zu einer Zeitspanne eine maximale Zeitspanne für eine einzelne Verabreichung/Einnahme angegeben werden.\n\n**Beispiel:**\n* Die Dosierung der einzelnen Verabreichung/Einnahme eines Arzneimittels erfolgt über die Zeitspanne von 1 Stunde (1h).", "requirements": "Many timing schedules are determined by regular repetitions.", "min": 0, "max": "1", "base": { "path": "Timing.repeat", "min": 0, "max": "1" }, "type": [ { "code": "Element" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" }, { "key": "tim-9", "severity": "error", "human": "If there's an offset, there must be a when (and not C, CM, CD, CV)", "expression": "offset.empty() or (when.exists() and ((when in ('C' | 'CM' | 'CD' | 'CV')).not()))", "xpath": "not(exists(f:offset)) or exists(f:when)", "source": "http://hl7.org/fhir/StructureDefinition/Timing" }, { "key": "tim-5", "severity": "error", "human": "period SHALL be a non-negative value", "expression": "period.exists() implies period >= 0", "xpath": "f:period/@value >= 0 or not(f:period/@value)", "source": "http://hl7.org/fhir/StructureDefinition/Timing" }, { "key": "tim-6", "severity": "error", "human": "If there's a periodMax, there must be a period", "expression": "periodMax.empty() or period.exists()", "xpath": "not(exists(f:periodMax)) or exists(f:period)", "source": "http://hl7.org/fhir/StructureDefinition/Timing" }, { "key": "tim-7", "severity": "error", "human": "If there's a durationMax, there must be a duration", "expression": "durationMax.empty() or duration.exists()", "xpath": "not(exists(f:durationMax)) or exists(f:duration)", "source": "http://hl7.org/fhir/StructureDefinition/Timing" }, { "key": "tim-8", "severity": "error", "human": "If there's a countMax, there must be a count", "expression": "countMax.empty() or count.exists()", "xpath": "not(exists(f:countMax)) or exists(f:count)", "source": "http://hl7.org/fhir/StructureDefinition/Timing" }, { "key": "tim-1", "severity": "error", "human": "if there's a duration, there needs to be duration units", "expression": "duration.empty() or durationUnit.exists()", "xpath": "not(exists(f:duration)) or exists(f:durationUnit)", "source": "http://hl7.org/fhir/StructureDefinition/Timing" }, { "key": "tim-10", "severity": "error", "human": "If there's a timeOfDay, there cannot be a when, or vice versa", "expression": "timeOfDay.empty() or when.empty()", "xpath": "not(exists(f:timeOfDay)) or not(exists(f:when))", "source": "http://hl7.org/fhir/StructureDefinition/Timing" }, { "key": "tim-2", "severity": "error", "human": "if there's a period, there needs to be period units", "expression": "period.empty() or periodUnit.exists()", "xpath": "not(exists(f:period)) or exists(f:periodUnit)", "source": "http://hl7.org/fhir/StructureDefinition/Timing" }, { "key": "tim-4", "severity": "error", "human": "duration SHALL be a non-negative value", "expression": "duration.exists() implies duration >= 0", "xpath": "f:duration/@value >= 0 or not(f:duration/@value)", "source": "http://hl7.org/fhir/StructureDefinition/Timing" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "rim", "map": "Implies PIVL or EIVL" } ] }, { "id": "Dosage.timing.repeat.id", "path": "Dosage.timing.repeat.id", "representation": [ "xmlAttr" ], "short": "Unique id for inter-element referencing", "definition": "Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.", "min": 0, "max": "1", "base": { "path": "Element.id", "min": 0, "max": "1" }, "type": [ { "extension": [ { "url": "http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type", "valueUrl": "string" } ], "code": "http://hl7.org/fhirpath/System.String" } ], "mapping": [ { "identity": "rim", "map": "n/a" } ] }, { "id": "Dosage.timing.repeat.extension", "path": "Dosage.timing.repeat.extension", "slicing": { "discriminator": [ { "type": "value", "path": "url" } ], "description": "Extensions are always sliced by (at least) url", "rules": "open" }, "short": "Additional content defined by implementations", "definition": "May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.", "comment": "There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.", "alias": [ "extensions", "user content" ], "min": 0, "max": "*", "base": { "path": "Element.extension", "min": 0, "max": "*" }, "type": [ { "code": "Extension" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" }, { "key": "ext-1", "severity": "error", "human": "Must have either extensions or value[x], not both", "expression": "extension.exists() != value.exists()", "xpath": "exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])", "source": "http://hl7.org/fhir/StructureDefinition/Extension" } ], "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "rim", "map": "N/A" } ] }, { "id": "Dosage.timing.repeat.bounds[x]", "path": "Dosage.timing.repeat.bounds[x]", "slicing": { "discriminator": [ { "type": "type", "path": "$this" } ], "ordered": false, "rules": "open" }, "short": "Length/Range of lengths, or (Start and/or end) limits", "definition": "Hier wird abgebildet, in welchem Zeitraum oder in welcher Zeitspanne das Arzneimittel in der spezifischen Dosierung verabreicht/eingenommen wird. Zum Beispiel können hiermit spezifische Zeiträume bei der Auf- oder Ab-Dosierung von Medikamenten abgebildet werden.", "min": 1, "max": "1", "base": { "path": "Timing.repeat.bounds[x]", "min": 0, "max": "1" }, "type": [ { "code": "Duration" }, { "code": "Range" }, { "code": "Period" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "rim", "map": "IVL(TS) used in a QSI" } ] }, { "id": "Dosage.timing.repeat.bounds[x]:boundsDuration", "path": "Dosage.timing.repeat.bounds[x]", "sliceName": "boundsDuration", "short": "Length/Range of lengths, or (Start and/or end) limits", "definition": "Hier kann angegeben, in welcher festen Zeitspanne das Arzneimittel in der spezifischen Dosierung verabreicht/eingenommen wird. Dabei beginnt und endet der mögliche Zeitraum der Einnahme in dem Zeitraum, welcher innerhalb des Elements \\\"Verabreichung/Einnahme: Zeitangabe-Auswahl\\\" -> \\\"Zeitraum\\\" auf der obersten Ebene des Profils \\\"Medikations-Information\\\" definiert ist.\n\n**Beispiel:**\n* Die Verabreichung/Einnahme eines Arzneimittels erfolgt für 5 Tage, wobei der unter \\\"Verabreichung/Einnahme: Zeitangabe-Auswahl\\\" -> \\\"Zeitraum\\\" -> \\\"von\\\" / \\\"bis\\\" definierte Zeitraum am 01.01.2024 beginnt (Element \\\"von\\\") und am 10.01.2024 (Element \\\"bis\\\") endet. Innerhalb dieses Zeitraums erfolgt die Einnahme für 5 Tage.", "min": 0, "max": "1", "base": { "path": "Timing.repeat.bounds[x]", "min": 0, "max": "1" }, "type": [ { "code": "Duration" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "rim", "map": "IVL(TS) used in a QSI" } ] }, { "id": "Dosage.timing.repeat.bounds[x]:boundsDuration.id", "path": "Dosage.timing.repeat.bounds[x].id", "representation": [ "xmlAttr" ], "short": "Unique id for inter-element referencing", "definition": "Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.", "min": 0, "max": "1", "base": { "path": "Element.id", "min": 0, "max": "1" }, "type": [ { "extension": [ { "url": "http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type", "valueUrl": "string" } ], "code": "http://hl7.org/fhirpath/System.String" } ], "mapping": [ { "identity": "rim", "map": "n/a" } ] }, { "id": "Dosage.timing.repeat.bounds[x]:boundsDuration.extension", "path": "Dosage.timing.repeat.bounds[x].extension", "slicing": { "discriminator": [ { "type": "value", "path": "url" } ], "description": "Extensions are always sliced by (at least) url", "rules": "open" }, "short": "Additional content defined by implementations", "definition": "May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.", "comment": "There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.", "alias": [ "extensions", "user content" ], "min": 0, "max": "*", "base": { "path": "Element.extension", "min": 0, "max": "*" }, "type": [ { "code": "Extension" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" }, { "key": "ext-1", "severity": "error", "human": "Must have either extensions or value[x], not both", "expression": "extension.exists() != value.exists()", "xpath": "exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])", "source": "http://hl7.org/fhir/StructureDefinition/Extension" } ], "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "rim", "map": "N/A" } ] }, { "id": "Dosage.timing.repeat.bounds[x]:boundsDuration.value", "path": "Dosage.timing.repeat.bounds[x].value", "short": "Numerical value (with implicit precision)", "definition": "Hier kann der Wert der Zeitspanne angegeben werden, innerhalb der das Arzneimittel verabreicht/eingenommen wird.", "comment": "The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books).", "requirements": "Precision is handled implicitly in almost all cases of measurement.", "min": 1, "max": "1", "base": { "path": "Quantity.value", "min": 0, "max": "1" }, "type": [ { "code": "decimal" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "SN.2 / CQ - N/A" }, { "identity": "rim", "map": "PQ.value, CO.value, MO.value, IVL.high or IVL.low depending on the value" } ] }, { "id": "Dosage.timing.repeat.bounds[x]:boundsDuration.comparator", "path": "Dosage.timing.repeat.bounds[x].comparator", "short": "< | <= | >= | > - how to understand the value", "definition": "How the value should be understood and represented - whether the actual value is greater or less than the stated value due to measurement issues; e.g. if the comparator is \"<\" , then the real value is < stated value.", "comment": "Note that FHIR strings SHALL NOT exceed 1MB in size", "requirements": "Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology.", "min": 0, "max": "1", "base": { "path": "Quantity.comparator", "min": 0, "max": "1" }, "type": [ { "code": "code" } ], "meaningWhenMissing": "If there is no comparator, then there is no modification of the value", "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "isModifier": true, "isModifierReason": "This is labeled as \"Is Modifier\" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value", "isSummary": true, "binding": { "extension": [ { "url": "http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName", "valueString": "QuantityComparator" } ], "strength": "required", "description": "How the Quantity should be understood and represented.", "valueSet": "http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1" }, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "SN.1 / CQ.1" }, { "identity": "rim", "map": "IVL properties" } ] }, { "id": "Dosage.timing.repeat.bounds[x]:boundsDuration.unit", "extension": [ { "url": "http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable", "valueBoolean": true } ], "path": "Dosage.timing.repeat.bounds[x].unit", "short": "Unit representation", "definition": "Hier wird die Zeiteinheit in menschenlesbarer Sprache angegeben.", "comment": "Note that FHIR strings SHALL NOT exceed 1MB in size", "requirements": "There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms.", "min": 1, "max": "1", "base": { "path": "Quantity.unit", "min": 0, "max": "1" }, "type": [ { "code": "string" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "(see OBX.6 etc.) / CQ.2" }, { "identity": "rim", "map": "PQ.unit" } ] }, { "id": "Dosage.timing.repeat.bounds[x]:boundsDuration.system", "path": "Dosage.timing.repeat.bounds[x].system", "short": "System that defines coded unit form", "definition": "The identification of the system that provides the coded form of the unit.", "comment": "see http://en.wikipedia.org/wiki/Uniform_resource_identifier", "requirements": "Need to know the system that defines the coded form of the unit.", "min": 1, "max": "1", "base": { "path": "Quantity.system", "min": 0, "max": "1" }, "type": [ { "code": "uri" } ], "condition": [ "ele-1", "qty-3" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "(see OBX.6 etc.) / CQ.2" }, { "identity": "rim", "map": "CO.codeSystem, PQ.translation.codeSystem" } ] }, { "id": "Dosage.timing.repeat.bounds[x]:boundsDuration.code", "path": "Dosage.timing.repeat.bounds[x].code", "short": "Coded form of the unit", "definition": "Hier wird die Zeiteinheit als Code angegeben.", "comment": "The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system.", "requirements": "Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest.", "min": 1, "max": "1", "base": { "path": "Quantity.code", "min": 0, "max": "1" }, "type": [ { "code": "code" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "(see OBX.6 etc.) / CQ.2" }, { "identity": "rim", "map": "PQ.code, MO.currency, PQ.translation.code" } ] }, { "id": "Dosage.timing.repeat.bounds[x]:boundsRange", "path": "Dosage.timing.repeat.bounds[x]", "sliceName": "boundsRange", "short": "Length/Range of lengths, or (Start and/or end) limits", "definition": "Hier kann angegeben, in welcher variablen Zeitspanne das Arzneimittel in der spezifischen Dosierung verabreicht/eingenommen wird. Dabei beginnt und endet der mögliche Zeitraum der Einnahme in dem Zeitraum, welcher innerhalb des Elements \\\"Verabreichung/Einnahme: Zeitangabe-Auswahl\\\" -> \\\"Zeitraum\\\" auf der obersten Ebene des Profils \\\"Medikations-Information\\\" definiert ist.\n\n**Beispiel:**\n* Die Verabreichung/Einnahme eines Arzneimittels erfolgt für 3 Tage (Untergrenze der Zeitspanne) bis 5 Tage (Obergrenze der Zeitspanne), wobei der unter \\\"Verabreichung/Einnahme: Zeitangabe-Auswahl\\\" -> \\\"Zeitraum\\\" -> \\\"von\\\" / \\\"bis\\\" definierte Zeitraum am 01.01.2024 beginnt (Element \\\"von\\\") und am 10.01.2024 (Element \\\"bis\\\") endet. Innerhalb dieses Zeitraums erfolgt die Einnahme für 3 Tage bis 5 Tage.", "min": 0, "max": "1", "base": { "path": "Timing.repeat.bounds[x]", "min": 0, "max": "1" }, "type": [ { "code": "Range" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "rim", "map": "IVL(TS) used in a QSI" } ] }, { "id": "Dosage.timing.repeat.bounds[x]:boundsRange.id", "path": "Dosage.timing.repeat.bounds[x].id", "representation": [ "xmlAttr" ], "short": "Unique id for inter-element referencing", "definition": "Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.", "min": 0, "max": "1", "base": { "path": "Element.id", "min": 0, "max": "1" }, "type": [ { "extension": [ { "url": "http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type", "valueUrl": "string" } ], "code": "http://hl7.org/fhirpath/System.String" } ], "mapping": [ { "identity": "rim", "map": "n/a" } ] }, { "id": "Dosage.timing.repeat.bounds[x]:boundsRange.extension", "path": "Dosage.timing.repeat.bounds[x].extension", "slicing": { "discriminator": [ { "type": "value", "path": "url" } ], "description": "Extensions are always sliced by (at least) url", "rules": "open" }, "short": "Additional content defined by implementations", "definition": "May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.", "comment": "There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.", "alias": [ "extensions", "user content" ], "min": 0, "max": "*", "base": { "path": "Element.extension", "min": 0, "max": "*" }, "type": [ { "code": "Extension" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" }, { "key": "ext-1", "severity": "error", "human": "Must have either extensions or value[x], not both", "expression": "extension.exists() != value.exists()", "xpath": "exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])", "source": "http://hl7.org/fhir/StructureDefinition/Extension" } ], "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "rim", "map": "N/A" } ] }, { "id": "Dosage.timing.repeat.bounds[x]:boundsRange.low", "path": "Dosage.timing.repeat.bounds[x].low", "short": "Low limit", "definition": "Hier wird die Untergrenze der variablen Zeitspanne abgebildet.", "comment": "If the low element is missing, the low boundary is not known.", "min": 0, "max": "1", "base": { "path": "Range.low", "min": 0, "max": "1" }, "type": [ { "code": "Quantity", "profile": [ "http://hl7.org/fhir/StructureDefinition/SimpleQuantity" ] } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" }, { "key": "qty-3", "severity": "error", "human": "If a code for the unit is present, the system SHALL also be present", "expression": "code.empty() or system.exists()", "xpath": "not(exists(f:code)) or exists(f:system)", "source": "http://hl7.org/fhir/StructureDefinition/Quantity" }, { "key": "sqty-1", "severity": "error", "human": "The comparator is not used on a SimpleQuantity", "expression": "comparator.empty()", "xpath": "not(exists(f:comparator))", "source": "http://hl7.org/fhir/StructureDefinition/SimpleQuantity" } ], "mustSupport": true, "isModifier": false, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "SN (see also Range) or CQ" }, { "identity": "rim", "map": "PQ, IVL, MO, CO, depending on the values" }, { "identity": "v2", "map": "NR.1" }, { "identity": "rim", "map": "./low" } ] }, { "id": "Dosage.timing.repeat.bounds[x]:boundsRange.low.id", "path": "Dosage.timing.repeat.bounds[x].low.id", "representation": [ "xmlAttr" ], "short": "Unique id for inter-element referencing", "definition": "Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.", "min": 0, "max": "1", "base": { "path": "Element.id", "min": 0, "max": "1" }, "type": [ { "extension": [ { "url": "http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type", "valueUrl": "string" } ], "code": "http://hl7.org/fhirpath/System.String" } ], "mapping": [ { "identity": "rim", "map": "n/a" } ] }, { "id": "Dosage.timing.repeat.bounds[x]:boundsRange.low.extension", "path": "Dosage.timing.repeat.bounds[x].low.extension", "slicing": { "discriminator": [ { "type": "value", "path": "url" } ], "description": "Extensions are always sliced by (at least) url", "rules": "open" }, "short": "Additional content defined by implementations", "definition": "May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.", "comment": "There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.", "alias": [ "extensions", "user content" ], "min": 0, "max": "*", "base": { "path": "Element.extension", "min": 0, "max": "*" }, "type": [ { "code": "Extension" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" }, { "key": "ext-1", "severity": "error", "human": "Must have either extensions or value[x], not both", "expression": "extension.exists() != value.exists()", "xpath": "exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])", "source": "http://hl7.org/fhir/StructureDefinition/Extension" } ], "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "rim", "map": "N/A" } ] }, { "id": "Dosage.timing.repeat.bounds[x]:boundsRange.low.value", "path": "Dosage.timing.repeat.bounds[x].low.value", "short": "Numerical value (with implicit precision)", "definition": "Hier kann der Wert der Zeitspanne angegeben werden, innerhalb der das Arzneimittel verabreicht/eingenommen wird.", "comment": "The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books).", "requirements": "Precision is handled implicitly in almost all cases of measurement.", "min": 1, "max": "1", "base": { "path": "Quantity.value", "min": 0, "max": "1" }, "type": [ { "code": "decimal" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "SN.2 / CQ - N/A" }, { "identity": "rim", "map": "PQ.value, CO.value, MO.value, IVL.high or IVL.low depending on the value" } ] }, { "id": "Dosage.timing.repeat.bounds[x]:boundsRange.low.comparator", "path": "Dosage.timing.repeat.bounds[x].low.comparator", "short": "< | <= | >= | > - how to understand the value", "definition": "Not allowed to be used in this context", "comment": "Note that FHIR strings SHALL NOT exceed 1MB in size", "requirements": "Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology.", "min": 0, "max": "0", "base": { "path": "Quantity.comparator", "min": 0, "max": "1" }, "type": [ { "code": "code" } ], "meaningWhenMissing": "If there is no comparator, then there is no modification of the value", "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "isModifier": true, "isModifierReason": "This is labeled as \"Is Modifier\" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value", "isSummary": true, "binding": { "extension": [ { "url": "http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName", "valueString": "QuantityComparator" } ], "strength": "required", "description": "How the Quantity should be understood and represented.", "valueSet": "http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1" }, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "SN.1 / CQ.1" }, { "identity": "rim", "map": "IVL properties" } ] }, { "id": "Dosage.timing.repeat.bounds[x]:boundsRange.low.unit", "extension": [ { "url": "http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable", "valueBoolean": true } ], "path": "Dosage.timing.repeat.bounds[x].low.unit", "short": "Unit representation", "definition": "Hier wird die Zeiteinheit in menschenlesbarer Sprache angegeben.", "comment": "Note that FHIR strings SHALL NOT exceed 1MB in size", "requirements": "There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms.", "min": 1, "max": "1", "base": { "path": "Quantity.unit", "min": 0, "max": "1" }, "type": [ { "code": "string" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "(see OBX.6 etc.) / CQ.2" }, { "identity": "rim", "map": "PQ.unit" } ] }, { "id": "Dosage.timing.repeat.bounds[x]:boundsRange.low.system", "path": "Dosage.timing.repeat.bounds[x].low.system", "short": "System that defines coded unit form", "definition": "The identification of the system that provides the coded form of the unit.", "comment": "see http://en.wikipedia.org/wiki/Uniform_resource_identifier", "requirements": "Need to know the system that defines the coded form of the unit.", "min": 1, "max": "1", "base": { "path": "Quantity.system", "min": 0, "max": "1" }, "type": [ { "code": "uri" } ], "condition": [ "ele-1", "qty-3" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "(see OBX.6 etc.) / CQ.2" }, { "identity": "rim", "map": "CO.codeSystem, PQ.translation.codeSystem" } ] }, { "id": "Dosage.timing.repeat.bounds[x]:boundsRange.low.code", "path": "Dosage.timing.repeat.bounds[x].low.code", "short": "Coded form of the unit", "definition": "Hier wird die Zeiteinheit als Code angegeben.", "comment": "The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system.", "requirements": "Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest.", "min": 1, "max": "1", "base": { "path": "Quantity.code", "min": 0, "max": "1" }, "type": [ { "code": "code" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "(see OBX.6 etc.) / CQ.2" }, { "identity": "rim", "map": "PQ.code, MO.currency, PQ.translation.code" } ] }, { "id": "Dosage.timing.repeat.bounds[x]:boundsRange.high", "path": "Dosage.timing.repeat.bounds[x].high", "short": "High limit", "definition": "Hier wird die Obergrenze der variablen Zeitspanne abgebildet.", "comment": "If the high element is missing, the high boundary is not known.", "min": 0, "max": "1", "base": { "path": "Range.high", "min": 0, "max": "1" }, "type": [ { "code": "Quantity", "profile": [ "http://hl7.org/fhir/StructureDefinition/SimpleQuantity" ] } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" }, { "key": "qty-3", "severity": "error", "human": "If a code for the unit is present, the system SHALL also be present", "expression": "code.empty() or system.exists()", "xpath": "not(exists(f:code)) or exists(f:system)", "source": "http://hl7.org/fhir/StructureDefinition/Quantity" }, { "key": "sqty-1", "severity": "error", "human": "The comparator is not used on a SimpleQuantity", "expression": "comparator.empty()", "xpath": "not(exists(f:comparator))", "source": "http://hl7.org/fhir/StructureDefinition/SimpleQuantity" } ], "mustSupport": true, "isModifier": false, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "SN (see also Range) or CQ" }, { "identity": "rim", "map": "PQ, IVL, MO, CO, depending on the values" }, { "identity": "v2", "map": "NR.2" }, { "identity": "rim", "map": "./high" } ] }, { "id": "Dosage.timing.repeat.bounds[x]:boundsRange.high.id", "path": "Dosage.timing.repeat.bounds[x].high.id", "representation": [ "xmlAttr" ], "short": "Unique id for inter-element referencing", "definition": "Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.", "min": 0, "max": "1", "base": { "path": "Element.id", "min": 0, "max": "1" }, "type": [ { "extension": [ { "url": "http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type", "valueUrl": "string" } ], "code": "http://hl7.org/fhirpath/System.String" } ], "mapping": [ { "identity": "rim", "map": "n/a" } ] }, { "id": "Dosage.timing.repeat.bounds[x]:boundsRange.high.extension", "path": "Dosage.timing.repeat.bounds[x].high.extension", "slicing": { "discriminator": [ { "type": "value", "path": "url" } ], "description": "Extensions are always sliced by (at least) url", "rules": "open" }, "short": "Additional content defined by implementations", "definition": "May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.", "comment": "There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.", "alias": [ "extensions", "user content" ], "min": 0, "max": "*", "base": { "path": "Element.extension", "min": 0, "max": "*" }, "type": [ { "code": "Extension" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" }, { "key": "ext-1", "severity": "error", "human": "Must have either extensions or value[x], not both", "expression": "extension.exists() != value.exists()", "xpath": "exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])", "source": "http://hl7.org/fhir/StructureDefinition/Extension" } ], "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "rim", "map": "N/A" } ] }, { "id": "Dosage.timing.repeat.bounds[x]:boundsRange.high.value", "path": "Dosage.timing.repeat.bounds[x].high.value", "short": "Numerical value (with implicit precision)", "definition": "Hier kann der Wert der Zeitspanne angegeben werden, innerhalb der das Arzneimittel verabreicht/eingenommen wird.", "comment": "The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books).", "requirements": "Precision is handled implicitly in almost all cases of measurement.", "min": 1, "max": "1", "base": { "path": "Quantity.value", "min": 0, "max": "1" }, "type": [ { "code": "decimal" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "SN.2 / CQ - N/A" }, { "identity": "rim", "map": "PQ.value, CO.value, MO.value, IVL.high or IVL.low depending on the value" } ] }, { "id": "Dosage.timing.repeat.bounds[x]:boundsRange.high.comparator", "path": "Dosage.timing.repeat.bounds[x].high.comparator", "short": "< | <= | >= | > - how to understand the value", "definition": "Not allowed to be used in this context", "comment": "Note that FHIR strings SHALL NOT exceed 1MB in size", "requirements": "Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology.", "min": 0, "max": "0", "base": { "path": "Quantity.comparator", "min": 0, "max": "1" }, "type": [ { "code": "code" } ], "meaningWhenMissing": "If there is no comparator, then there is no modification of the value", "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "isModifier": true, "isModifierReason": "This is labeled as \"Is Modifier\" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value", "isSummary": true, "binding": { "extension": [ { "url": "http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName", "valueString": "QuantityComparator" } ], "strength": "required", "description": "How the Quantity should be understood and represented.", "valueSet": "http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1" }, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "SN.1 / CQ.1" }, { "identity": "rim", "map": "IVL properties" } ] }, { "id": "Dosage.timing.repeat.bounds[x]:boundsRange.high.unit", "extension": [ { "url": "http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable", "valueBoolean": true } ], "path": "Dosage.timing.repeat.bounds[x].high.unit", "short": "Unit representation", "definition": "Hier wird die Zeiteinheit in menschenlesbarer Sprache angegeben.", "comment": "Note that FHIR strings SHALL NOT exceed 1MB in size", "requirements": "There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms.", "min": 1, "max": "1", "base": { "path": "Quantity.unit", "min": 0, "max": "1" }, "type": [ { "code": "string" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "(see OBX.6 etc.) / CQ.2" }, { "identity": "rim", "map": "PQ.unit" } ] }, { "id": "Dosage.timing.repeat.bounds[x]:boundsRange.high.system", "path": "Dosage.timing.repeat.bounds[x].high.system", "short": "System that defines coded unit form", "definition": "The identification of the system that provides the coded form of the unit.", "comment": "see http://en.wikipedia.org/wiki/Uniform_resource_identifier", "requirements": "Need to know the system that defines the coded form of the unit.", "min": 1, "max": "1", "base": { "path": "Quantity.system", "min": 0, "max": "1" }, "type": [ { "code": "uri" } ], "condition": [ "ele-1", "qty-3" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "(see OBX.6 etc.) / CQ.2" }, { "identity": "rim", "map": "CO.codeSystem, PQ.translation.codeSystem" } ] }, { "id": "Dosage.timing.repeat.bounds[x]:boundsRange.high.code", "path": "Dosage.timing.repeat.bounds[x].high.code", "short": "Coded form of the unit", "definition": "Hier wird die Zeiteinheit als Code angegeben.", "comment": "The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system.", "requirements": "Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest.", "min": 1, "max": "1", "base": { "path": "Quantity.code", "min": 0, "max": "1" }, "type": [ { "code": "code" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "(see OBX.6 etc.) / CQ.2" }, { "identity": "rim", "map": "PQ.code, MO.currency, PQ.translation.code" } ] }, { "id": "Dosage.timing.repeat.bounds[x]:boundsPeriod", "path": "Dosage.timing.repeat.bounds[x]", "sliceName": "boundsPeriod", "short": "Length/Range of lengths, or (Start and/or end) limits", "definition": "Hier wird abgebildet, in welchem Zeitraum das Arzneimittel in der spezifischen Dosierung verabreicht/eingenommen wird.\n\n**Beispiel:**\n* Abbildung spezifischer Zeiträume bei der Auf- oder Ab-Dosierung von Medikamenten unter Angabe von konkreten Datumsangaben.", "min": 0, "max": "1", "base": { "path": "Timing.repeat.bounds[x]", "min": 0, "max": "1" }, "type": [ { "code": "Period" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "rim", "map": "IVL(TS) used in a QSI" } ] }, { "id": "Dosage.timing.repeat.bounds[x]:boundsPeriod.id", "path": "Dosage.timing.repeat.bounds[x].id", "representation": [ "xmlAttr" ], "short": "Unique id for inter-element referencing", "definition": "Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.", "min": 0, "max": "1", "base": { "path": "Element.id", "min": 0, "max": "1" }, "type": [ { "extension": [ { "url": "http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type", "valueUrl": "string" } ], "code": "http://hl7.org/fhirpath/System.String" } ], "mapping": [ { "identity": "rim", "map": "n/a" } ] }, { "id": "Dosage.timing.repeat.bounds[x]:boundsPeriod.extension", "path": "Dosage.timing.repeat.bounds[x].extension", "slicing": { "discriminator": [ { "type": "value", "path": "url" } ], "description": "Extensions are always sliced by (at least) url", "rules": "open" }, "short": "Additional content defined by implementations", "definition": "May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.", "comment": "There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.", "alias": [ "extensions", "user content" ], "min": 0, "max": "*", "base": { "path": "Element.extension", "min": 0, "max": "*" }, "type": [ { "code": "Extension" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" }, { "key": "ext-1", "severity": "error", "human": "Must have either extensions or value[x], not both", "expression": "extension.exists() != value.exists()", "xpath": "exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])", "source": "http://hl7.org/fhir/StructureDefinition/Extension" } ], "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "rim", "map": "N/A" } ] }, { "id": "Dosage.timing.repeat.bounds[x]:boundsPeriod.start", "path": "Dosage.timing.repeat.bounds[x].start", "short": "Starting time with inclusive boundary", "definition": "Hier wird der Beginn des dosisspezifischen Zeitraumes angegeben.", "comment": "If the low element is missing, the meaning is that the low boundary is not known.", "min": 1, "max": "1", "base": { "path": "Period.start", "min": 0, "max": "1" }, "type": [ { "code": "dateTime" } ], "condition": [ "ele-1", "per-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "DR.1" }, { "identity": "rim", "map": "./low" } ] }, { "id": "Dosage.timing.repeat.bounds[x]:boundsPeriod.end", "path": "Dosage.timing.repeat.bounds[x].end", "short": "End time with inclusive boundary, if not ongoing", "definition": "Hier wird das Ende des dosisspezifischen Zeitraumes angegeben.", "comment": "The high value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has an end value of 2012-02-03.", "min": 0, "max": "1", "base": { "path": "Period.end", "min": 0, "max": "1" }, "type": [ { "code": "dateTime" } ], "meaningWhenMissing": "If the end of the period is missing, it means that the period is ongoing", "condition": [ "ele-1", "per-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "DR.2" }, { "identity": "rim", "map": "./high" } ] }, { "id": "Dosage.timing.repeat.count", "path": "Dosage.timing.repeat.count", "short": "Number of times to repeat", "definition": "Hier kann die absolute Anzahl der Wiederholungen einer Verabreichung/Einnahme eines Arzneimittels als Zahl angegeben werden.\n\n**Beispiel:**\n* Anzahl der Einnahmen eines Arzneimittels = 5", "comment": "If you have both bounds and count, then this should be understood as within the bounds period, until count times happens.", "requirements": "Repetitions may be limited by end time or total occurrences.", "min": 0, "max": "1", "base": { "path": "Timing.repeat.count", "min": 0, "max": "1" }, "type": [ { "code": "positiveInt" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "rim", "map": "PIVL.count" } ] }, { "id": "Dosage.timing.repeat.countMax", "path": "Dosage.timing.repeat.countMax", "short": "Maximum number of times to repeat", "definition": "Hier kann die maximale Anzahl der Wiederholungen einer Verabreichung/Einnahme eines Arzneimittels als Zahl angegeben werden. Eine maximale Anzahl der Wiederholungen kann nur angegeben werden, wenn eine absolute Anzahl der Wiederholungen einer Verabreichung/Einnahme eines Arzneimittels angegeben ist.\n\n**Beispiel:**\n* Maximale Anzahl der Einnahmen eines Arzneimittels = 10", "comment": "32 bit number; for values larger than this, use decimal", "min": 0, "max": "1", "base": { "path": "Timing.repeat.countMax", "min": 0, "max": "1" }, "type": [ { "code": "positiveInt" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "rim", "map": "PIVL.count" } ] }, { "id": "Dosage.timing.repeat.duration", "path": "Dosage.timing.repeat.duration", "short": "How long when it happens", "definition": "Hier kann der Wert der Zeitspanne angegeben werden, innerhalb der das Arzneimittel verabreicht/eingenommen wird.", "comment": "For some events the duration is part of the definition of the event (e.g. IV infusions, where the duration is implicit in the specified quantity and rate). For others, it's part of the timing specification (e.g. exercise).", "requirements": "Some activities are not instantaneous and need to be maintained for a period of time.", "min": 0, "max": "1", "base": { "path": "Timing.repeat.duration", "min": 0, "max": "1" }, "type": [ { "code": "decimal" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "rim", "map": "PIVL.phase" } ] }, { "id": "Dosage.timing.repeat.durationMax", "path": "Dosage.timing.repeat.durationMax", "short": "How long when it happens (Max)", "definition": "Hier kann der maximale Wert der Zeitspanne angegeben werden, innerhalb der das Arzneimittel verabreicht/eingenommen wird. Eine maximale Zeitspanne kann nur angegeben werden, wenn eine feste Zeitspanne für die Dauer der einzelnen Verabreichung/Einnahme angegeben wird.", "comment": "For some events the duration is part of the definition of the event (e.g. IV infusions, where the duration is implicit in the specified quantity and rate). For others, it's part of the timing specification (e.g. exercise).", "requirements": "Some activities are not instantaneous and need to be maintained for a period of time.", "min": 0, "max": "1", "base": { "path": "Timing.repeat.durationMax", "min": 0, "max": "1" }, "type": [ { "code": "decimal" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "rim", "map": "PIVL.phase" } ] }, { "id": "Dosage.timing.repeat.durationUnit", "path": "Dosage.timing.repeat.durationUnit", "short": "s | min | h | d | wk | mo | a - unit of time (UCUM)", "definition": "Hier wird die Zeiteinheit angegeben.", "comment": "Note that FHIR strings SHALL NOT exceed 1MB in size", "min": 0, "max": "1", "base": { "path": "Timing.repeat.durationUnit", "min": 0, "max": "1" }, "type": [ { "code": "code" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "binding": { "extension": [ { "url": "http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName", "valueString": "UnitsOfTime" } ], "strength": "required", "description": "A unit of time (units from UCUM).", "valueSet": "http://hl7.org/fhir/ValueSet/units-of-time|4.0.1" }, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "rim", "map": "PIVL.phase.unit" } ] }, { "id": "Dosage.timing.repeat.frequency", "path": "Dosage.timing.repeat.frequency", "short": "Event occurs frequency times per period", "definition": "Hier wird angegeben, mit welcher Frequenz das Arzneimittel innerhalb einer bestimmten Zeitspanne verabreicht/eingenommen wird.", "comment": "32 bit number; for values larger than this, use decimal", "min": 0, "max": "1", "base": { "path": "Timing.repeat.frequency", "min": 0, "max": "1" }, "type": [ { "code": "positiveInt" } ], "meaningWhenMissing": "If no frequency is stated, the assumption is that the event occurs once per period, but systems SHOULD always be specific about this", "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "rim", "map": "PIVL.phase" } ] }, { "id": "Dosage.timing.repeat.frequencyMax", "path": "Dosage.timing.repeat.frequencyMax", "short": "Event occurs up to frequencyMax times per period", "definition": "Hier wird angegeben, mit welcher Frequenz das Arzneimittel innerhalb einer bestimmten Zeitspanne verabreicht/eingenommen wird.", "comment": "32 bit number; for values larger than this, use decimal", "min": 0, "max": "1", "base": { "path": "Timing.repeat.frequencyMax", "min": 0, "max": "1" }, "type": [ { "code": "positiveInt" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "rim", "map": "PIVL.phase" } ] }, { "id": "Dosage.timing.repeat.period", "path": "Dosage.timing.repeat.period", "short": "Event occurs frequency times per period", "definition": "Hier wird der absolute Wert der Zeitspanne angegeben, innerhalb der die definierte Anzahl der Verabreichungen/Einnahmen durchgeführt wird.", "comment": "Do not use an IEEE type floating point type, instead use something that works like a true decimal, with inbuilt precision (e.g. Java BigInteger)", "min": 0, "max": "1", "base": { "path": "Timing.repeat.period", "min": 0, "max": "1" }, "type": [ { "code": "decimal" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "rim", "map": "PIVL.phase" } ] }, { "id": "Dosage.timing.repeat.periodMax", "path": "Dosage.timing.repeat.periodMax", "short": "Upper limit of period (3-4 hours)", "definition": "Hier wird der maximale Wert der Zeitspanne angegeben, innerhalb der die definierte Anzahl der Verabreichungen/Einnahmen durchgeführt wird. Wenn ein maximaler Wert der Zeitspanne angegeben wird, muss ein absoluter Wert der Zeitspanne angegeben werden. In diesem Fall definieren die beiden Werte \"Absoluter Wert der Zeitspanne\" und \"Maximaler Wert der Zeitspanne\" einen Bereich für die Zeitspanne. Der absolute Wert der Zeitspanne entspricht dann der Untergrenze für einen Bereich der Zeitspanne und der maximale Wert der Zeitspanne der Obergrenze für den Bereich der Zeitspanne.", "comment": "Do not use an IEEE type floating point type, instead use something that works like a true decimal, with inbuilt precision (e.g. Java BigInteger)", "min": 0, "max": "1", "base": { "path": "Timing.repeat.periodMax", "min": 0, "max": "1" }, "type": [ { "code": "decimal" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "rim", "map": "PIVL.phase" } ] }, { "id": "Dosage.timing.repeat.periodUnit", "path": "Dosage.timing.repeat.periodUnit", "short": "s | min | h | d | wk | mo | a - unit of time (UCUM)", "definition": "Hier wird die Zeiteinheit angegeben.", "comment": "Note that FHIR strings SHALL NOT exceed 1MB in size", "min": 0, "max": "1", "base": { "path": "Timing.repeat.periodUnit", "min": 0, "max": "1" }, "type": [ { "code": "code" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "binding": { "extension": [ { "url": "http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName", "valueString": "UnitsOfTime" } ], "strength": "required", "description": "A unit of time (units from UCUM).", "valueSet": "http://hl7.org/fhir/ValueSet/units-of-time|4.0.1" }, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "rim", "map": "PIVL.phase.unit" } ] }, { "id": "Dosage.timing.repeat.dayOfWeek", "path": "Dosage.timing.repeat.dayOfWeek", "short": "mon | tue | wed | thu | fri | sat | sun", "definition": "Hier wird der Wochentag, an dem das Arzneimittel verabreicht/eingenommen werden soll, angegeben.", "comment": "If no days are specified, the action is assumed to happen every day as otherwise specified. The elements frequency and period cannot be used as well as dayOfWeek.", "min": 0, "max": "*", "base": { "path": "Timing.repeat.dayOfWeek", "min": 0, "max": "*" }, "type": [ { "code": "code" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "binding": { "extension": [ { "url": "http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName", "valueString": "DayOfWeek" } ], "strength": "required", "valueSet": "http://hl7.org/fhir/ValueSet/days-of-week|4.0.1" }, "mapping": [ { "identity": "rim", "map": "n/a" } ] }, { "id": "Dosage.timing.repeat.timeOfDay", "path": "Dosage.timing.repeat.timeOfDay", "short": "Time of day for action", "definition": "Hier werden Uhrzeiten angegeben, zu denen das Arzneimittel verabreicht/eingenommen wird.", "comment": "When time of day is specified, it is inferred that the action happens every day (as filtered by dayofWeek) on the specified times. The elements when, frequency and period cannot be used as well as timeOfDay.", "min": 0, "max": "*", "base": { "path": "Timing.repeat.timeOfDay", "min": 0, "max": "*" }, "type": [ { "code": "time" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" } ] }, { "id": "Dosage.timing.repeat.when", "path": "Dosage.timing.repeat.when", "slicing": { "discriminator": [ { "type": "pattern", "path": "$this" } ], "rules": "open" }, "short": "Code for time period of occurrence", "definition": "Hier werden Tageszeiten angegeben, zu denen das Arzneimittel verabreicht/eingenommen wird.\nErgänzend können Zusatzinformationen angegeben werden, die die Verabreichung/Einnahme des Arzneimittels in Bezug zu Mahlzeiten und Schlafzeiten abbilden.", "comment": "When more than one event is listed, the event is tied to the union of the specified events.", "requirements": "Timings are frequently determined by occurrences such as waking, eating and sleep.", "min": 0, "max": "*", "base": { "path": "Timing.repeat.when", "min": 0, "max": "*" }, "type": [ { "code": "code" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "binding": { "extension": [ { "url": "http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName", "valueString": "EventTiming" } ], "strength": "required", "description": "Real world event relating to the schedule.", "valueSet": "http://hl7.org/fhir/ValueSet/event-timing|4.0.1" }, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "rim", "map": "EIVL.event" } ] }, { "id": "Dosage.timing.repeat.when:period-of-day", "path": "Dosage.timing.repeat.when", "sliceName": "period-of-day", "short": "Code for time period of occurrence", "definition": "Hier werden Tageszeiten, zu denen das Arzneimittel verabreicht/eingenommen wird, als Code aus dem FHIR ValueSet http://hl7.org/fhir/ValueSet/event-timing angegeben. Dabei spiegeln die vier möglichen Konzepte \"Morgens\", \"Mittags\", \"Abends\", \"Nachts\" das in der Praxis übliche \"4er-Einnahmeschema\" wieder (beispielsweise \"0-1-0-0\" entspricht dem Konzept \"Einnahme von einer Tablette Mittags\").", "comment": "When more than one event is listed, the event is tied to the union of the specified events.", "requirements": "Timings are frequently determined by occurrences such as waking, eating and sleep.", "min": 0, "max": "1", "base": { "path": "Timing.repeat.when", "min": 0, "max": "*" }, "type": [ { "code": "code" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "binding": { "extension": [ { "url": "http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName", "valueString": "EventTiming" } ], "strength": "required", "description": "Real world event relating to the schedule.", "valueSet": "https://gematik.de/fhir/terminology/ValueSet/epa-event-timing-vs" }, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "rim", "map": "EIVL.event" } ] }, { "id": "Dosage.timing.repeat.when:meal-sleep-times", "path": "Dosage.timing.repeat.when", "sliceName": "meal-sleep-times", "short": "Code for time period of occurrence", "definition": "Hier wird eine mahlzeiten- und schlafzeitenabhängige Zusatzinformation zur Einnahme eines Arzneimittels als Code aus dem FHIR ValueSet http://hl7.org/fhir/ValueSet/event-timing angegeben.", "comment": "When more than one event is listed, the event is tied to the union of the specified events.", "requirements": "Timings are frequently determined by occurrences such as waking, eating and sleep.", "min": 0, "max": "*", "base": { "path": "Timing.repeat.when", "min": 0, "max": "*" }, "type": [ { "code": "code" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "binding": { "extension": [ { "url": "http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName", "valueString": "EventTiming" } ], "strength": "required", "description": "Real world event relating to the schedule.", "valueSet": "https://gematik.de/fhir/terminology/ValueSet/epa-timing-event-vs" }, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "rim", "map": "EIVL.event" } ] }, { "id": "Dosage.timing.repeat.offset", "path": "Dosage.timing.repeat.offset", "short": "Minutes from event (before or after)", "definition": "Hier wird der Zeitabstand der Verabreichung/Einnahme eines Arzneimittels zu einer Mahlzeit oder der Schlafzeit in Minuten angegeben.", "comment": "32 bit number; for values larger than this, use decimal", "min": 0, "max": "1", "base": { "path": "Timing.repeat.offset", "min": 0, "max": "1" }, "type": [ { "code": "unsignedInt" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "rim", "map": "EIVL.offset" } ] }, { "id": "Dosage.timing.code", "path": "Dosage.timing.code", "short": "BID | TID | QID | AM | PM | QD | QOD | +", "definition": "A code for the timing schedule (or just text in code.text). Some codes such as BID are ubiquitous, but many institutions define their own additional codes. If a code is provided, the code is understood to be a complete statement of whatever is specified in the structured timing data, and either the code or the data may be used to interpret the Timing, with the exception that .repeat.bounds still applies over the code (and is not contained in the code).", "comment": "BID etc. are defined as 'at institutionally specified times'. For example, an institution may choose that BID is \"always at 7am and 6pm\". If it is inappropriate for this choice to be made, the code BID should not be used. Instead, a distinct organization-specific code should be used in place of the HL7-defined BID code and/or a structured representation should be used (in this case, specifying the two event times).", "min": 0, "max": "1", "base": { "path": "Timing.code", "min": 0, "max": "1" }, "type": [ { "code": "CodeableConcept" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "isSummary": true, "binding": { "extension": [ { "url": "http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName", "valueString": "TimingAbbreviation" } ], "strength": "preferred", "description": "Code for a known / defined timing pattern.", "valueSet": "http://hl7.org/fhir/ValueSet/timing-abbreviation" }, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "CE/CNE/CWE" }, { "identity": "rim", "map": "CD" }, { "identity": "orim", "map": "fhir:CodeableConcept rdfs:subClassOf dt:CD" }, { "identity": "rim", "map": "QSC.code" } ] }, { "id": "Dosage.asNeeded[x]", "path": "Dosage.asNeeded[x]", "slicing": { "discriminator": [ { "type": "type", "path": "$this" } ], "ordered": false, "rules": "open" }, "short": "Take \"as needed\" (for x)", "definition": "Hier werden Angaben zur Dosierung als Bedarfsmedikation gemacht.", "comment": "Can express \"as needed\" without a reason by setting the Boolean = True. In this case the CodeableConcept is not populated. Or you can express \"as needed\" with a reason by including the CodeableConcept. In this case the Boolean is assumed to be True. If you set the Boolean to False, then the dose is given according to the schedule and is not \"prn\" or \"as needed\".", "min": 0, "max": "1", "base": { "path": "Dosage.asNeeded[x]", "min": 0, "max": "1" }, "type": [ { "code": "boolean" }, { "code": "CodeableConcept" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "binding": { "extension": [ { "url": "http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName", "valueString": "MedicationAsNeededReason" } ], "strength": "example", "description": "A coded concept identifying the precondition that should be met or evaluated prior to consuming or administering a medication dose. For example \"pain\", \"30 minutes prior to sexual intercourse\", \"on flare-up\" etc.", "valueSet": "http://hl7.org/fhir/ValueSet/medication-as-needed-reason" }, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "TQ1-9" }, { "identity": "rim", "map": ".outboundRelationship[typeCode=PRCN].target[classCode=OBS, moodCode=EVN, code=\"as needed\"].value=boolean or codable concept" } ] }, { "id": "Dosage.asNeeded[x]:asNeededBoolean", "path": "Dosage.asNeeded[x]", "sliceName": "asNeededBoolean", "short": "Take \"as needed\" (for x)", "definition": "Hier wird angegeben, ob es sich um eine Bedarfsmedikation handelt.", "comment": "Can express \"as needed\" without a reason by setting the Boolean = True. In this case the CodeableConcept is not populated. Or you can express \"as needed\" with a reason by including the CodeableConcept. In this case the Boolean is assumed to be True. If you set the Boolean to False, then the dose is given according to the schedule and is not \"prn\" or \"as needed\".", "min": 0, "max": "1", "base": { "path": "Dosage.asNeeded[x]", "min": 0, "max": "1" }, "type": [ { "code": "boolean" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "TQ1-9" }, { "identity": "rim", "map": ".outboundRelationship[typeCode=PRCN].target[classCode=OBS, moodCode=EVN, code=\"as needed\"].value=boolean or codable concept" } ] }, { "id": "Dosage.asNeeded[x]:asNeededCodeableConcept", "path": "Dosage.asNeeded[x]", "sliceName": "asNeededCodeableConcept", "short": "Take \"as needed\" (for x)", "definition": "Hier wird angegeben, welcher Zustand die Bedingung zur Verabreichung/Einnahme der Bedarfsmedikation ist, z. B. Schmerzen, Übelkeit, usw.", "comment": "Can express \"as needed\" without a reason by setting the Boolean = True. In this case the CodeableConcept is not populated. Or you can express \"as needed\" with a reason by including the CodeableConcept. In this case the Boolean is assumed to be True. If you set the Boolean to False, then the dose is given according to the schedule and is not \"prn\" or \"as needed\".", "min": 0, "max": "1", "base": { "path": "Dosage.asNeeded[x]", "min": 0, "max": "1" }, "type": [ { "code": "CodeableConcept" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "binding": { "extension": [ { "url": "http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName", "valueString": "MedicationAsNeededReason" } ], "strength": "example", "description": "A coded concept identifying the precondition that should be met or evaluated prior to consuming or administering a medication dose. For example \"pain\", \"30 minutes prior to sexual intercourse\", \"on flare-up\" etc.", "valueSet": "http://hl7.org/fhir/ValueSet/medication-as-needed-reason" }, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "TQ1-9" }, { "identity": "rim", "map": ".outboundRelationship[typeCode=PRCN].target[classCode=OBS, moodCode=EVN, code=\"as needed\"].value=boolean or codable concept" } ] }, { "id": "Dosage.asNeeded[x]:asNeededCodeableConcept.id", "path": "Dosage.asNeeded[x].id", "representation": [ "xmlAttr" ], "short": "Unique id for inter-element referencing", "definition": "Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.", "min": 0, "max": "1", "base": { "path": "Element.id", "min": 0, "max": "1" }, "type": [ { "extension": [ { "url": "http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type", "valueUrl": "string" } ], "code": "http://hl7.org/fhirpath/System.String" } ], "mapping": [ { "identity": "rim", "map": "n/a" } ] }, { "id": "Dosage.asNeeded[x]:asNeededCodeableConcept.extension", "path": "Dosage.asNeeded[x].extension", "slicing": { "discriminator": [ { "type": "value", "path": "url" } ], "description": "Extensions are always sliced by (at least) url", "rules": "open" }, "short": "Additional content defined by implementations", "definition": "May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.", "comment": "There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.", "alias": [ "extensions", "user content" ], "min": 0, "max": "*", "base": { "path": "Element.extension", "min": 0, "max": "*" }, "type": [ { "code": "Extension" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" }, { "key": "ext-1", "severity": "error", "human": "Must have either extensions or value[x], not both", "expression": "extension.exists() != value.exists()", "xpath": "exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])", "source": "http://hl7.org/fhir/StructureDefinition/Extension" } ], "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "rim", "map": "N/A" } ] }, { "id": "Dosage.asNeeded[x]:asNeededCodeableConcept.coding", "path": "Dosage.asNeeded[x].coding", "slicing": { "discriminator": [ { "type": "pattern", "path": "$this" } ], "rules": "open" }, "short": "Code defined by a terminology system", "definition": "Hier werden Codes angegeben.", "comment": "Das MustSupport gilt nur für die vordefinierten Slices.", "requirements": "Allows for alternative encodings within a code system, and translations to other code systems.", "min": 0, "max": "*", "base": { "path": "CodeableConcept.coding", "min": 0, "max": "*" }, "type": [ { "code": "Coding" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "CE/CNE/CWE subset one of the sets of component 1-3 or 4-6" }, { "identity": "rim", "map": "CV" }, { "identity": "orim", "map": "fhir:Coding rdfs:subClassOf dt:CDCoding" }, { "identity": "v2", "map": "C*E.1-8, C*E.10-22" }, { "identity": "rim", "map": "union(., ./translation)" }, { "identity": "orim", "map": "fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding" } ] }, { "id": "Dosage.asNeeded[x]:asNeededCodeableConcept.coding:snomed", "path": "Dosage.asNeeded[x].coding", "sliceName": "snomed", "short": "Code defined by a terminology system", "definition": "Hier wird ein Code aus dem Code-System SNOMED CT® eingetragen. Die Bedingung zum Auslösen einer Bedarfsmedikation ist ein breites Feld, welches das gesamte Spektrum der Medizin umfassen kann und ist deshalb in FHIR® als Example-binding von SNOMED CT®-Konzepten in den Subklassen der SCTID 404684003 vorgesehen, siehe http://hl7.org/fhir/ValueSet/medication-as-needed-reason.", "comment": "Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.", "requirements": "Allows for alternative encodings within a code system, and translations to other code systems.", "min": 0, "max": "1", "base": { "path": "CodeableConcept.coding", "min": 0, "max": "*" }, "type": [ { "code": "Coding" } ], "patternCoding": { "system": "http://snomed.info/sct" }, "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "binding": { "strength": "required", "valueSet": "https://gematik.de/fhir/terminology/ValueSet/epa-prn-medication-reason-snomed-ct-vs" }, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "CE/CNE/CWE subset one of the sets of component 1-3 or 4-6" }, { "identity": "rim", "map": "CV" }, { "identity": "orim", "map": "fhir:Coding rdfs:subClassOf dt:CDCoding" }, { "identity": "v2", "map": "C*E.1-8, C*E.10-22" }, { "identity": "rim", "map": "union(., ./translation)" }, { "identity": "orim", "map": "fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding" } ] }, { "id": "Dosage.asNeeded[x]:asNeededCodeableConcept.coding:snomed.id", "path": "Dosage.asNeeded[x].coding.id", "representation": [ "xmlAttr" ], "short": "Unique id for inter-element referencing", "definition": "Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.", "min": 0, "max": "1", "base": { "path": "Element.id", "min": 0, "max": "1" }, "type": [ { "extension": [ { "url": "http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type", "valueUrl": "string" } ], "code": "http://hl7.org/fhirpath/System.String" } ], "mapping": [ { "identity": "rim", "map": "n/a" } ] }, { "id": "Dosage.asNeeded[x]:asNeededCodeableConcept.coding:snomed.extension", "path": "Dosage.asNeeded[x].coding.extension", "slicing": { "discriminator": [ { "type": "value", "path": "url" } ], "description": "Extensions are always sliced by (at least) url", "rules": "open" }, "short": "Additional content defined by implementations", "definition": "May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.", "comment": "There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.", "alias": [ "extensions", "user content" ], "min": 0, "max": "*", "base": { "path": "Element.extension", "min": 0, "max": "*" }, "type": [ { "code": "Extension" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" }, { "key": "ext-1", "severity": "error", "human": "Must have either extensions or value[x], not both", "expression": "extension.exists() != value.exists()", "xpath": "exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])", "source": "http://hl7.org/fhir/StructureDefinition/Extension" } ], "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "rim", "map": "N/A" } ] }, { "id": "Dosage.asNeeded[x]:asNeededCodeableConcept.coding:snomed.system", "path": "Dosage.asNeeded[x].coding.system", "short": "Identity of the terminology system", "definition": "The identification of the code system that defines the meaning of the symbol in the code.", "comment": "The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously.", "requirements": "Need to be unambiguous about the source of the definition of the symbol.", "min": 1, "max": "1", "base": { "path": "Coding.system", "min": 0, "max": "1" }, "type": [ { "code": "uri" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "C*E.3" }, { "identity": "rim", "map": "./codeSystem" }, { "identity": "orim", "map": "fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem" } ] }, { "id": "Dosage.asNeeded[x]:asNeededCodeableConcept.coding:snomed.version", "path": "Dosage.asNeeded[x].coding.version", "short": "Version of the system - if relevant", "definition": "The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.", "comment": "Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.", "min": 1, "max": "1", "base": { "path": "Coding.version", "min": 0, "max": "1" }, "type": [ { "code": "string" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "C*E.7" }, { "identity": "rim", "map": "./codeSystemVersion" }, { "identity": "orim", "map": "fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion" } ] }, { "id": "Dosage.asNeeded[x]:asNeededCodeableConcept.coding:snomed.code", "path": "Dosage.asNeeded[x].coding.code", "short": "Symbol in syntax defined by the system", "definition": "A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).", "comment": "Note that FHIR strings SHALL NOT exceed 1MB in size", "requirements": "Need to refer to a particular code in the system.", "min": 1, "max": "1", "base": { "path": "Coding.code", "min": 0, "max": "1" }, "type": [ { "code": "code" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "C*E.1" }, { "identity": "rim", "map": "./code" }, { "identity": "orim", "map": "fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code" } ] }, { "id": "Dosage.asNeeded[x]:asNeededCodeableConcept.coding:snomed.display", "extension": [ { "url": "http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable", "valueBoolean": true } ], "path": "Dosage.asNeeded[x].coding.display", "short": "Representation defined by the system", "definition": "A representation of the meaning of the code in the system, following the rules of the system.", "comment": "Note that FHIR strings SHALL NOT exceed 1MB in size", "requirements": "Need to be able to carry a human-readable meaning of the code for readers that do not know the system.", "min": 1, "max": "1", "base": { "path": "Coding.display", "min": 0, "max": "1" }, "type": [ { "code": "string" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "C*E.2 - but note this is not well followed" }, { "identity": "rim", "map": "CV.displayName" }, { "identity": "orim", "map": "fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName" } ] }, { "id": "Dosage.asNeeded[x]:asNeededCodeableConcept.coding:snomed.userSelected", "path": "Dosage.asNeeded[x].coding.userSelected", "short": "If this coding was chosen directly by the user", "definition": "Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).", "comment": "Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.", "requirements": "This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.", "min": 0, "max": "1", "base": { "path": "Coding.userSelected", "min": 0, "max": "1" }, "type": [ { "code": "boolean" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "Sometimes implied by being first" }, { "identity": "rim", "map": "CD.codingRationale" }, { "identity": "orim", "map": "fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\\#true a [ fhir:source \"true\"; fhir:target dt:CDCoding.codingRationale\\#O ]" } ] }, { "id": "Dosage.asNeeded[x]:asNeededCodeableConcept.text", "extension": [ { "url": "http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable", "valueBoolean": true } ], "path": "Dosage.asNeeded[x].text", "short": "Plain text representation of the concept", "definition": "Hier wird die Bedingung zur Verabreichung/Einnahme der Bedarfsmedikation als Freitext angegeben.", "comment": "Very often the text is the same as a displayName of one of the codings.", "requirements": "The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.", "min": 0, "max": "1", "base": { "path": "CodeableConcept.text", "min": 0, "max": "1" }, "type": [ { "code": "string" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "C*E.9. But note many systems use C*E.2 for this" }, { "identity": "rim", "map": "./originalText[mediaType/code=\"text/plain\"]/data" }, { "identity": "orim", "map": "fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText" } ] }, { "id": "Dosage.site", "path": "Dosage.site", "short": "Body site to administer to", "definition": "Body site to administer to.", "comment": "If the use case requires attributes from the BodySite resource (e.g. to identify and track separately) then use the standard extension [bodySite](extension-bodysite.html). May be a summary code, or a reference to a very precise definition of the location, or both.", "requirements": "A coded specification of the anatomic site where the medication first enters the body.", "min": 0, "max": "1", "base": { "path": "Dosage.site", "min": 0, "max": "1" }, "type": [ { "code": "CodeableConcept" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "binding": { "extension": [ { "url": "http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName", "valueString": "MedicationAdministrationSite" } ], "strength": "example", "description": "A coded concept describing the site location the medicine enters into or onto the body.", "valueSet": "http://hl7.org/fhir/ValueSet/approach-site-codes" }, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "CE/CNE/CWE" }, { "identity": "rim", "map": "CD" }, { "identity": "orim", "map": "fhir:CodeableConcept rdfs:subClassOf dt:CD" }, { "identity": "v2", "map": "RXR-2" }, { "identity": "rim", "map": ".approachSiteCode" } ] }, { "id": "Dosage.site.id", "path": "Dosage.site.id", "representation": [ "xmlAttr" ], "short": "Unique id for inter-element referencing", "definition": "Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.", "min": 0, "max": "1", "base": { "path": "Element.id", "min": 0, "max": "1" }, "type": [ { "extension": [ { "url": "http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type", "valueUrl": "string" } ], "code": "http://hl7.org/fhirpath/System.String" } ], "mapping": [ { "identity": "rim", "map": "n/a" } ] }, { "id": "Dosage.site.extension", "path": "Dosage.site.extension", "slicing": { "discriminator": [ { "type": "value", "path": "url" } ], "description": "Extensions are always sliced by (at least) url", "rules": "open" }, "short": "Additional content defined by implementations", "definition": "May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.", "comment": "There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.", "alias": [ "extensions", "user content" ], "min": 0, "max": "*", "base": { "path": "Element.extension", "min": 0, "max": "*" }, "type": [ { "code": "Extension" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" }, { "key": "ext-1", "severity": "error", "human": "Must have either extensions or value[x], not both", "expression": "extension.exists() != value.exists()", "xpath": "exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])", "source": "http://hl7.org/fhir/StructureDefinition/Extension" } ], "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "rim", "map": "N/A" } ] }, { "id": "Dosage.site.coding", "path": "Dosage.site.coding", "slicing": { "discriminator": [ { "type": "pattern", "path": "$this" } ], "rules": "open" }, "short": "Code defined by a terminology system", "definition": "A reference to a code defined by a terminology system.", "comment": "Das MustSupport gilt nur für die vordefinierten Slices.", "requirements": "Allows for alternative encodings within a code system, and translations to other code systems.", "min": 0, "max": "*", "base": { "path": "CodeableConcept.coding", "min": 0, "max": "*" }, "type": [ { "code": "Coding" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "CE/CNE/CWE subset one of the sets of component 1-3 or 4-6" }, { "identity": "rim", "map": "CV" }, { "identity": "orim", "map": "fhir:Coding rdfs:subClassOf dt:CDCoding" }, { "identity": "v2", "map": "C*E.1-8, C*E.10-22" }, { "identity": "rim", "map": "union(., ./translation)" }, { "identity": "orim", "map": "fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding" } ] }, { "id": "Dosage.site.coding:snomed", "path": "Dosage.site.coding", "sliceName": "snomed", "short": "Code defined by a terminology system", "definition": "A reference to a code defined by a terminology system.", "comment": "Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.", "requirements": "Allows for alternative encodings within a code system, and translations to other code systems.", "min": 0, "max": "1", "base": { "path": "CodeableConcept.coding", "min": 0, "max": "*" }, "type": [ { "code": "Coding" } ], "patternCoding": { "system": "http://snomed.info/sct" }, "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "CE/CNE/CWE subset one of the sets of component 1-3 or 4-6" }, { "identity": "rim", "map": "CV" }, { "identity": "orim", "map": "fhir:Coding rdfs:subClassOf dt:CDCoding" }, { "identity": "v2", "map": "C*E.1-8, C*E.10-22" }, { "identity": "rim", "map": "union(., ./translation)" }, { "identity": "orim", "map": "fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding" } ] }, { "id": "Dosage.site.coding:snomed.id", "path": "Dosage.site.coding.id", "representation": [ "xmlAttr" ], "short": "Unique id for inter-element referencing", "definition": "Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.", "min": 0, "max": "1", "base": { "path": "Element.id", "min": 0, "max": "1" }, "type": [ { "extension": [ { "url": "http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type", "valueUrl": "string" } ], "code": "http://hl7.org/fhirpath/System.String" } ], "mapping": [ { "identity": "rim", "map": "n/a" } ] }, { "id": "Dosage.site.coding:snomed.extension", "path": "Dosage.site.coding.extension", "slicing": { "discriminator": [ { "type": "value", "path": "url" } ], "description": "Extensions are always sliced by (at least) url", "rules": "open" }, "short": "Additional content defined by implementations", "definition": "May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.", "comment": "There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.", "alias": [ "extensions", "user content" ], "min": 0, "max": "*", "base": { "path": "Element.extension", "min": 0, "max": "*" }, "type": [ { "code": "Extension" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" }, { "key": "ext-1", "severity": "error", "human": "Must have either extensions or value[x], not both", "expression": "extension.exists() != value.exists()", "xpath": "exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])", "source": "http://hl7.org/fhir/StructureDefinition/Extension" } ], "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "rim", "map": "N/A" } ] }, { "id": "Dosage.site.coding:snomed.system", "path": "Dosage.site.coding.system", "short": "Identity of the terminology system", "definition": "The identification of the code system that defines the meaning of the symbol in the code.", "comment": "The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously.", "requirements": "Need to be unambiguous about the source of the definition of the symbol.", "min": 1, "max": "1", "base": { "path": "Coding.system", "min": 0, "max": "1" }, "type": [ { "code": "uri" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "C*E.3" }, { "identity": "rim", "map": "./codeSystem" }, { "identity": "orim", "map": "fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem" } ] }, { "id": "Dosage.site.coding:snomed.version", "path": "Dosage.site.coding.version", "short": "Version of the system - if relevant", "definition": "The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.", "comment": "Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.", "min": 1, "max": "1", "base": { "path": "Coding.version", "min": 0, "max": "1" }, "type": [ { "code": "string" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "C*E.7" }, { "identity": "rim", "map": "./codeSystemVersion" }, { "identity": "orim", "map": "fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion" } ] }, { "id": "Dosage.site.coding:snomed.code", "path": "Dosage.site.coding.code", "short": "Symbol in syntax defined by the system", "definition": "A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).", "comment": "Note that FHIR strings SHALL NOT exceed 1MB in size", "requirements": "Need to refer to a particular code in the system.", "min": 1, "max": "1", "base": { "path": "Coding.code", "min": 0, "max": "1" }, "type": [ { "code": "code" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "C*E.1" }, { "identity": "rim", "map": "./code" }, { "identity": "orim", "map": "fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code" } ] }, { "id": "Dosage.site.coding:snomed.display", "extension": [ { "url": "http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable", "valueBoolean": true } ], "path": "Dosage.site.coding.display", "short": "Representation defined by the system", "definition": "A representation of the meaning of the code in the system, following the rules of the system.", "comment": "Note that FHIR strings SHALL NOT exceed 1MB in size", "requirements": "Need to be able to carry a human-readable meaning of the code for readers that do not know the system.", "min": 1, "max": "1", "base": { "path": "Coding.display", "min": 0, "max": "1" }, "type": [ { "code": "string" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "C*E.2 - but note this is not well followed" }, { "identity": "rim", "map": "CV.displayName" }, { "identity": "orim", "map": "fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName" } ] }, { "id": "Dosage.site.coding:snomed.userSelected", "path": "Dosage.site.coding.userSelected", "short": "If this coding was chosen directly by the user", "definition": "Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).", "comment": "Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.", "requirements": "This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.", "min": 0, "max": "1", "base": { "path": "Coding.userSelected", "min": 0, "max": "1" }, "type": [ { "code": "boolean" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "Sometimes implied by being first" }, { "identity": "rim", "map": "CD.codingRationale" }, { "identity": "orim", "map": "fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\\#true a [ fhir:source \"true\"; fhir:target dt:CDCoding.codingRationale\\#O ]" } ] }, { "id": "Dosage.site.text", "extension": [ { "url": "http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable", "valueBoolean": true } ], "path": "Dosage.site.text", "short": "Plain text representation of the concept", "definition": "A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.", "comment": "Very often the text is the same as a displayName of one of the codings.", "requirements": "The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.", "min": 0, "max": "1", "base": { "path": "CodeableConcept.text", "min": 0, "max": "1" }, "type": [ { "code": "string" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "C*E.9. But note many systems use C*E.2 for this" }, { "identity": "rim", "map": "./originalText[mediaType/code=\"text/plain\"]/data" }, { "identity": "orim", "map": "fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText" } ] }, { "id": "Dosage.route", "path": "Dosage.route", "short": "How drug should enter body", "definition": "How drug should enter body.", "comment": "Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination.", "requirements": "A code specifying the route or physiological path of administration of a therapeutic agent into or onto a patient's body.", "min": 0, "max": "1", "base": { "path": "Dosage.route", "min": 0, "max": "1" }, "type": [ { "code": "CodeableConcept" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "binding": { "extension": [ { "url": "http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName", "valueString": "RouteOfAdministration" } ], "strength": "example", "description": "A coded concept describing the route or physiological path of administration of a therapeutic agent into or onto the body of a subject.", "valueSet": "http://hl7.org/fhir/ValueSet/route-codes" }, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "CE/CNE/CWE" }, { "identity": "rim", "map": "CD" }, { "identity": "orim", "map": "fhir:CodeableConcept rdfs:subClassOf dt:CD" }, { "identity": "v2", "map": "RXR-1" }, { "identity": "rim", "map": ".routeCode" } ] }, { "id": "Dosage.route.id", "path": "Dosage.route.id", "representation": [ "xmlAttr" ], "short": "Unique id for inter-element referencing", "definition": "Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.", "min": 0, "max": "1", "base": { "path": "Element.id", "min": 0, "max": "1" }, "type": [ { "extension": [ { "url": "http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type", "valueUrl": "string" } ], "code": "http://hl7.org/fhirpath/System.String" } ], "mapping": [ { "identity": "rim", "map": "n/a" } ] }, { "id": "Dosage.route.extension", "path": "Dosage.route.extension", "slicing": { "discriminator": [ { "type": "value", "path": "url" } ], "description": "Extensions are always sliced by (at least) url", "rules": "open" }, "short": "Additional content defined by implementations", "definition": "May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.", "comment": "There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.", "alias": [ "extensions", "user content" ], "min": 0, "max": "*", "base": { "path": "Element.extension", "min": 0, "max": "*" }, "type": [ { "code": "Extension" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" }, { "key": "ext-1", "severity": "error", "human": "Must have either extensions or value[x], not both", "expression": "extension.exists() != value.exists()", "xpath": "exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])", "source": "http://hl7.org/fhir/StructureDefinition/Extension" } ], "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "rim", "map": "N/A" } ] }, { "id": "Dosage.route.coding", "path": "Dosage.route.coding", "slicing": { "discriminator": [ { "type": "pattern", "path": "$this" } ], "rules": "open" }, "short": "Code defined by a terminology system", "definition": "A reference to a code defined by a terminology system.", "comment": "Das MustSupport gilt nur für die vordefinierten Slices.", "requirements": "Allows for alternative encodings within a code system, and translations to other code systems.", "min": 0, "max": "*", "base": { "path": "CodeableConcept.coding", "min": 0, "max": "*" }, "type": [ { "code": "Coding" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "CE/CNE/CWE subset one of the sets of component 1-3 or 4-6" }, { "identity": "rim", "map": "CV" }, { "identity": "orim", "map": "fhir:Coding rdfs:subClassOf dt:CDCoding" }, { "identity": "v2", "map": "C*E.1-8, C*E.10-22" }, { "identity": "rim", "map": "union(., ./translation)" }, { "identity": "orim", "map": "fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding" } ] }, { "id": "Dosage.route.coding:snomed", "path": "Dosage.route.coding", "sliceName": "snomed", "short": "Code defined by a terminology system", "definition": "A reference to a code defined by a terminology system.", "comment": "Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.", "requirements": "Allows for alternative encodings within a code system, and translations to other code systems.", "min": 0, "max": "1", "base": { "path": "CodeableConcept.coding", "min": 0, "max": "*" }, "type": [ { "code": "Coding" } ], "patternCoding": { "system": "http://snomed.info/sct" }, "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "binding": { "strength": "extensible", "valueSet": "https://gematik.de/fhir/terminology/ValueSet/epa-route-of-administration-snomed-ct-vs" }, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "CE/CNE/CWE subset one of the sets of component 1-3 or 4-6" }, { "identity": "rim", "map": "CV" }, { "identity": "orim", "map": "fhir:Coding rdfs:subClassOf dt:CDCoding" }, { "identity": "v2", "map": "C*E.1-8, C*E.10-22" }, { "identity": "rim", "map": "union(., ./translation)" }, { "identity": "orim", "map": "fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding" } ] }, { "id": "Dosage.route.coding:snomed.id", "path": "Dosage.route.coding.id", "representation": [ "xmlAttr" ], "short": "Unique id for inter-element referencing", "definition": "Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.", "min": 0, "max": "1", "base": { "path": "Element.id", "min": 0, "max": "1" }, "type": [ { "extension": [ { "url": "http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type", "valueUrl": "string" } ], "code": "http://hl7.org/fhirpath/System.String" } ], "mapping": [ { "identity": "rim", "map": "n/a" } ] }, { "id": "Dosage.route.coding:snomed.extension", "path": "Dosage.route.coding.extension", "slicing": { "discriminator": [ { "type": "value", "path": "url" } ], "description": "Extensions are always sliced by (at least) url", "rules": "open" }, "short": "Additional content defined by implementations", "definition": "May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.", "comment": "There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.", "alias": [ "extensions", "user content" ], "min": 0, "max": "*", "base": { "path": "Element.extension", "min": 0, "max": "*" }, "type": [ { "code": "Extension" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" }, { "key": "ext-1", "severity": "error", "human": "Must have either extensions or value[x], not both", "expression": "extension.exists() != value.exists()", "xpath": "exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])", "source": "http://hl7.org/fhir/StructureDefinition/Extension" } ], "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "rim", "map": "N/A" } ] }, { "id": "Dosage.route.coding:snomed.system", "path": "Dosage.route.coding.system", "short": "Identity of the terminology system", "definition": "The identification of the code system that defines the meaning of the symbol in the code.", "comment": "The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously.", "requirements": "Need to be unambiguous about the source of the definition of the symbol.", "min": 1, "max": "1", "base": { "path": "Coding.system", "min": 0, "max": "1" }, "type": [ { "code": "uri" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "C*E.3" }, { "identity": "rim", "map": "./codeSystem" }, { "identity": "orim", "map": "fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem" } ] }, { "id": "Dosage.route.coding:snomed.version", "path": "Dosage.route.coding.version", "short": "Version of the system - if relevant", "definition": "The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.", "comment": "Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.", "min": 1, "max": "1", "base": { "path": "Coding.version", "min": 0, "max": "1" }, "type": [ { "code": "string" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "C*E.7" }, { "identity": "rim", "map": "./codeSystemVersion" }, { "identity": "orim", "map": "fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion" } ] }, { "id": "Dosage.route.coding:snomed.code", "path": "Dosage.route.coding.code", "short": "Symbol in syntax defined by the system", "definition": "A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).", "comment": "Note that FHIR strings SHALL NOT exceed 1MB in size", "requirements": "Need to refer to a particular code in the system.", "min": 1, "max": "1", "base": { "path": "Coding.code", "min": 0, "max": "1" }, "type": [ { "code": "code" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "C*E.1" }, { "identity": "rim", "map": "./code" }, { "identity": "orim", "map": "fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code" } ] }, { "id": "Dosage.route.coding:snomed.display", "extension": [ { "url": "http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable", "valueBoolean": true } ], "path": "Dosage.route.coding.display", "short": "Representation defined by the system", "definition": "A representation of the meaning of the code in the system, following the rules of the system.", "comment": "Note that FHIR strings SHALL NOT exceed 1MB in size", "requirements": "Need to be able to carry a human-readable meaning of the code for readers that do not know the system.", "min": 1, "max": "1", "base": { "path": "Coding.display", "min": 0, "max": "1" }, "type": [ { "code": "string" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "C*E.2 - but note this is not well followed" }, { "identity": "rim", "map": "CV.displayName" }, { "identity": "orim", "map": "fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName" } ] }, { "id": "Dosage.route.coding:snomed.userSelected", "path": "Dosage.route.coding.userSelected", "short": "If this coding was chosen directly by the user", "definition": "Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).", "comment": "Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.", "requirements": "This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.", "min": 0, "max": "1", "base": { "path": "Coding.userSelected", "min": 0, "max": "1" }, "type": [ { "code": "boolean" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "Sometimes implied by being first" }, { "identity": "rim", "map": "CD.codingRationale" }, { "identity": "orim", "map": "fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\\#true a [ fhir:source \"true\"; fhir:target dt:CDCoding.codingRationale\\#O ]" } ] }, { "id": "Dosage.route.coding:edqm", "path": "Dosage.route.coding", "sliceName": "edqm", "short": "Code defined by a terminology system", "definition": "A reference to a code defined by a terminology system.", "comment": "Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.", "requirements": "Allows for alternative encodings within a code system, and translations to other code systems.", "min": 0, "max": "1", "base": { "path": "CodeableConcept.coding", "min": 0, "max": "*" }, "type": [ { "code": "Coding" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "binding": { "strength": "required", "valueSet": "https://gematik.de/fhir/terminology/ValueSet/epa-medicine-route-of-administration-edqm-vs" }, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "CE/CNE/CWE subset one of the sets of component 1-3 or 4-6" }, { "identity": "rim", "map": "CV" }, { "identity": "orim", "map": "fhir:Coding rdfs:subClassOf dt:CDCoding" }, { "identity": "v2", "map": "C*E.1-8, C*E.10-22" }, { "identity": "rim", "map": "union(., ./translation)" }, { "identity": "orim", "map": "fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding" } ] }, { "id": "Dosage.route.coding:edqm.id", "path": "Dosage.route.coding.id", "representation": [ "xmlAttr" ], "short": "Unique id for inter-element referencing", "definition": "Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.", "min": 0, "max": "1", "base": { "path": "Element.id", "min": 0, "max": "1" }, "type": [ { "extension": [ { "url": "http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type", "valueUrl": "string" } ], "code": "http://hl7.org/fhirpath/System.String" } ], "mapping": [ { "identity": "rim", "map": "n/a" } ] }, { "id": "Dosage.route.coding:edqm.extension", "path": "Dosage.route.coding.extension", "slicing": { "discriminator": [ { "type": "value", "path": "url" } ], "description": "Extensions are always sliced by (at least) url", "rules": "open" }, "short": "Additional content defined by implementations", "definition": "May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.", "comment": "There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.", "alias": [ "extensions", "user content" ], "min": 0, "max": "*", "base": { "path": "Element.extension", "min": 0, "max": "*" }, "type": [ { "code": "Extension" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" }, { "key": "ext-1", "severity": "error", "human": "Must have either extensions or value[x], not both", "expression": "extension.exists() != value.exists()", "xpath": "exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])", "source": "http://hl7.org/fhir/StructureDefinition/Extension" } ], "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "rim", "map": "N/A" } ] }, { "id": "Dosage.route.coding:edqm.system", "path": "Dosage.route.coding.system", "short": "Identity of the terminology system", "definition": "The identification of the code system that defines the meaning of the symbol in the code.", "comment": "The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously.", "requirements": "Need to be unambiguous about the source of the definition of the symbol.", "min": 1, "max": "1", "base": { "path": "Coding.system", "min": 0, "max": "1" }, "type": [ { "code": "uri" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "C*E.3" }, { "identity": "rim", "map": "./codeSystem" }, { "identity": "orim", "map": "fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem" } ] }, { "id": "Dosage.route.coding:edqm.version", "path": "Dosage.route.coding.version", "short": "Version of the system - if relevant", "definition": "The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.", "comment": "Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.", "min": 0, "max": "1", "base": { "path": "Coding.version", "min": 0, "max": "1" }, "type": [ { "code": "string" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "C*E.7" }, { "identity": "rim", "map": "./codeSystemVersion" }, { "identity": "orim", "map": "fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion" } ] }, { "id": "Dosage.route.coding:edqm.code", "path": "Dosage.route.coding.code", "short": "Symbol in syntax defined by the system", "definition": "A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).", "comment": "Note that FHIR strings SHALL NOT exceed 1MB in size", "requirements": "Need to refer to a particular code in the system.", "min": 1, "max": "1", "base": { "path": "Coding.code", "min": 0, "max": "1" }, "type": [ { "code": "code" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "C*E.1" }, { "identity": "rim", "map": "./code" }, { "identity": "orim", "map": "fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code" } ] }, { "id": "Dosage.route.coding:edqm.display", "extension": [ { "url": "http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable", "valueBoolean": true } ], "path": "Dosage.route.coding.display", "short": "Representation defined by the system", "definition": "A representation of the meaning of the code in the system, following the rules of the system.", "comment": "Note that FHIR strings SHALL NOT exceed 1MB in size", "requirements": "Need to be able to carry a human-readable meaning of the code for readers that do not know the system.", "min": 1, "max": "1", "base": { "path": "Coding.display", "min": 0, "max": "1" }, "type": [ { "code": "string" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "C*E.2 - but note this is not well followed" }, { "identity": "rim", "map": "CV.displayName" }, { "identity": "orim", "map": "fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName" } ] }, { "id": "Dosage.route.coding:edqm.userSelected", "path": "Dosage.route.coding.userSelected", "short": "If this coding was chosen directly by the user", "definition": "Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).", "comment": "Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.", "requirements": "This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.", "min": 0, "max": "1", "base": { "path": "Coding.userSelected", "min": 0, "max": "1" }, "type": [ { "code": "boolean" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "Sometimes implied by being first" }, { "identity": "rim", "map": "CD.codingRationale" }, { "identity": "orim", "map": "fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\\#true a [ fhir:source \"true\"; fhir:target dt:CDCoding.codingRationale\\#O ]" } ] }, { "id": "Dosage.route.text", "extension": [ { "url": "http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable", "valueBoolean": true } ], "path": "Dosage.route.text", "short": "Plain text representation of the concept", "definition": "A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.", "comment": "Very often the text is the same as a displayName of one of the codings.", "requirements": "The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.", "min": 0, "max": "1", "base": { "path": "CodeableConcept.text", "min": 0, "max": "1" }, "type": [ { "code": "string" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "C*E.9. But note many systems use C*E.2 for this" }, { "identity": "rim", "map": "./originalText[mediaType/code=\"text/plain\"]/data" }, { "identity": "orim", "map": "fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText" } ] }, { "id": "Dosage.method", "path": "Dosage.method", "short": "Technique for administering medication", "definition": "Technique for administering medication.", "comment": "Terminologies used often pre-coordinate this term with the route and or form of administration.", "requirements": "A coded value indicating the method by which the medication is introduced into or onto the body. Most commonly used for injections. For examples, Slow Push; Deep IV.", "min": 0, "max": "1", "base": { "path": "Dosage.method", "min": 0, "max": "1" }, "type": [ { "code": "CodeableConcept" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "isSummary": true, "binding": { "extension": [ { "url": "http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName", "valueString": "MedicationAdministrationMethod" } ], "strength": "example", "description": "A coded concept describing the technique by which the medicine is administered.", "valueSet": "http://hl7.org/fhir/ValueSet/administration-method-codes" }, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "CE/CNE/CWE" }, { "identity": "rim", "map": "CD" }, { "identity": "orim", "map": "fhir:CodeableConcept rdfs:subClassOf dt:CD" }, { "identity": "v2", "map": "RXR-4" }, { "identity": "rim", "map": ".doseQuantity" } ] }, { "id": "Dosage.doseAndRate", "path": "Dosage.doseAndRate", "short": "Amount of medication administered", "definition": "The amount of medication administered.", "min": 0, "max": "1", "base": { "path": "Dosage.doseAndRate", "min": 0, "max": "*" }, "type": [ { "code": "Element" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "TQ1-2" } ] }, { "id": "Dosage.doseAndRate.id", "path": "Dosage.doseAndRate.id", "representation": [ "xmlAttr" ], "short": "Unique id for inter-element referencing", "definition": "Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.", "min": 0, "max": "1", "base": { "path": "Element.id", "min": 0, "max": "1" }, "type": [ { "extension": [ { "url": "http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type", "valueUrl": "string" } ], "code": "http://hl7.org/fhirpath/System.String" } ], "mapping": [ { "identity": "rim", "map": "n/a" } ] }, { "id": "Dosage.doseAndRate.extension", "path": "Dosage.doseAndRate.extension", "slicing": { "discriminator": [ { "type": "value", "path": "url" } ], "description": "Extensions are always sliced by (at least) url", "rules": "open" }, "short": "Additional content defined by implementations", "definition": "May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.", "comment": "There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.", "alias": [ "extensions", "user content" ], "min": 0, "max": "*", "base": { "path": "Element.extension", "min": 0, "max": "*" }, "type": [ { "code": "Extension" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" }, { "key": "ext-1", "severity": "error", "human": "Must have either extensions or value[x], not both", "expression": "extension.exists() != value.exists()", "xpath": "exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])", "source": "http://hl7.org/fhir/StructureDefinition/Extension" } ], "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "rim", "map": "N/A" } ] }, { "id": "Dosage.doseAndRate.type", "path": "Dosage.doseAndRate.type", "short": "The kind of dose or rate specified", "definition": "The kind of dose or rate specified, for example, ordered or calculated.", "comment": "Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination.", "requirements": "If the type is not populated, assume to be \"ordered\".", "min": 0, "max": "1", "base": { "path": "Dosage.doseAndRate.type", "min": 0, "max": "1" }, "type": [ { "code": "CodeableConcept" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "isSummary": true, "binding": { "extension": [ { "url": "http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName", "valueString": "DoseAndRateType" } ], "strength": "example", "description": "The kind of dose or rate specified.", "valueSet": "http://hl7.org/fhir/ValueSet/dose-rate-type" }, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "CE/CNE/CWE" }, { "identity": "rim", "map": "CD" }, { "identity": "orim", "map": "fhir:CodeableConcept rdfs:subClassOf dt:CD" }, { "identity": "v2", "map": "RXO-21; RXE-23" } ] }, { "id": "Dosage.doseAndRate.dose[x]", "path": "Dosage.doseAndRate.dose[x]", "slicing": { "discriminator": [ { "type": "type", "path": "$this" } ], "ordered": false, "rules": "open" }, "short": "Amount of medication per dose", "definition": "Hier kann die Dosierung einer Gabe bzw. Einnahme abgebildet werden. Dabei kann es sich um eine definierte Menge für eine Einnahme handeln (z.B. die Einnahme von 5 mg eines Wirkstoffs im Rahmen einer Einnahme) oder um einen definierten Mengenbereich (z.B. die Einnahme von 5 mg bis 10 mg eines Wirkstoffs im Rahmen einer Einnahme).", "comment": "Note that this specifies the quantity of the specified medication, not the quantity for each active ingredient(s). Each ingredient amount can be communicated in the Medication resource. For example, if one wants to communicate that a tablet was 375 mg, where the dose was one tablet, you can use the Medication resource to document that the tablet was comprised of 375 mg of drug XYZ. Alternatively if the dose was 375 mg, then you may only need to use the Medication resource to indicate this was a tablet. If the example were an IV such as dopamine and you wanted to communicate that 400mg of dopamine was mixed in 500 ml of some IV solution, then this would all be communicated in the Medication resource. If the administration is not intended to be instantaneous (rate is present or timing has a duration), this can be specified to convey the total amount to be administered over the period of time as indicated by the schedule e.g. 500 ml in dose, with timing used to convey that this should be done over 4 hours.", "requirements": "The amount of therapeutic or other substance given at one administration event.", "min": 0, "max": "1", "base": { "path": "Dosage.doseAndRate.dose[x]", "min": 0, "max": "1" }, "type": [ { "code": "Range" }, { "code": "Quantity", "profile": [ "http://hl7.org/fhir/StructureDefinition/SimpleQuantity" ] } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "RXO-2, RXE-3" }, { "identity": "rim", "map": ".doseQuantity" } ] }, { "id": "Dosage.doseAndRate.dose[x]:doseQuantity", "extension": [ { "url": "http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status", "valueCode": "normative" }, { "url": "http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version", "valueCode": "4.0.0" } ], "path": "Dosage.doseAndRate.dose[x]", "sliceName": "doseQuantity", "short": "A fixed quantity (no comparator)", "definition": "Hier wird die Dosiermenge mittels einer definierten Menge angegeben.", "comment": "The context of use may frequently define what kind of quantity this is and therefore what kind of units can be used. The context of use may also restrict the values for the comparator.", "requirements": "The amount of therapeutic or other substance given at one administration event.", "min": 0, "max": "1", "base": { "path": "Dosage.doseAndRate.dose[x]", "min": 0, "max": "1" }, "type": [ { "code": "Quantity", "profile": [ "http://hl7.org/fhir/StructureDefinition/SimpleQuantity" ] } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" }, { "key": "qty-3", "severity": "error", "human": "If a code for the unit is present, the system SHALL also be present", "expression": "code.empty() or system.exists()", "xpath": "not(exists(f:code)) or exists(f:system)", "source": "http://hl7.org/fhir/StructureDefinition/Quantity" }, { "key": "sqty-1", "severity": "error", "human": "The comparator is not used on a SimpleQuantity", "expression": "comparator.empty()", "xpath": "not(exists(f:comparator))", "source": "http://hl7.org/fhir/StructureDefinition/SimpleQuantity" } ], "mustSupport": true, "isModifier": false, "isSummary": true, "binding": { "strength": "preferred", "valueSet": "https://fhir.kbv.de/ValueSet/KBV_VS_SFHIR_BMP_DOSIEREINHEIT" }, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "RXO-2, RXE-3" }, { "identity": "rim", "map": ".doseQuantity" }, { "identity": "v2", "map": "SN (see also Range) or CQ" }, { "identity": "rim", "map": "PQ, IVL, MO, CO, depending on the values" } ] }, { "id": "Dosage.doseAndRate.dose[x]:doseQuantity.id", "path": "Dosage.doseAndRate.dose[x].id", "representation": [ "xmlAttr" ], "short": "Unique id for inter-element referencing", "definition": "Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.", "min": 0, "max": "1", "base": { "path": "Element.id", "min": 0, "max": "1" }, "type": [ { "extension": [ { "url": "http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type", "valueUrl": "string" } ], "code": "http://hl7.org/fhirpath/System.String" } ], "mapping": [ { "identity": "rim", "map": "n/a" } ] }, { "id": "Dosage.doseAndRate.dose[x]:doseQuantity.extension", "path": "Dosage.doseAndRate.dose[x].extension", "slicing": { "discriminator": [ { "type": "value", "path": "url" } ], "description": "Extensions are always sliced by (at least) url", "rules": "open" }, "short": "Additional content defined by implementations", "definition": "May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.", "comment": "There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.", "alias": [ "extensions", "user content" ], "min": 0, "max": "*", "base": { "path": "Element.extension", "min": 0, "max": "*" }, "type": [ { "code": "Extension" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" }, { "key": "ext-1", "severity": "error", "human": "Must have either extensions or value[x], not both", "expression": "extension.exists() != value.exists()", "xpath": "exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])", "source": "http://hl7.org/fhir/StructureDefinition/Extension" } ], "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "rim", "map": "N/A" } ] }, { "id": "Dosage.doseAndRate.dose[x]:doseQuantity.value", "path": "Dosage.doseAndRate.dose[x].value", "short": "Numerical value (with implicit precision)", "definition": "Hier wird die Menge des Arzneimittels angegeben, die verabreicht/eingenommen wird.", "comment": "The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books).", "requirements": "Precision is handled implicitly in almost all cases of measurement.", "min": 1, "max": "1", "base": { "path": "Quantity.value", "min": 0, "max": "1" }, "type": [ { "code": "decimal" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "SN.2 / CQ - N/A" }, { "identity": "rim", "map": "PQ.value, CO.value, MO.value, IVL.high or IVL.low depending on the value" } ] }, { "id": "Dosage.doseAndRate.dose[x]:doseQuantity.comparator", "path": "Dosage.doseAndRate.dose[x].comparator", "short": "< | <= | >= | > - how to understand the value", "definition": "Not allowed to be used in this context", "comment": "Note that FHIR strings SHALL NOT exceed 1MB in size", "requirements": "Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology.", "min": 0, "max": "0", "base": { "path": "Quantity.comparator", "min": 0, "max": "1" }, "type": [ { "code": "code" } ], "meaningWhenMissing": "If there is no comparator, then there is no modification of the value", "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "isModifier": true, "isModifierReason": "This is labeled as \"Is Modifier\" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value", "isSummary": true, "binding": { "extension": [ { "url": "http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName", "valueString": "QuantityComparator" } ], "strength": "required", "description": "How the Quantity should be understood and represented.", "valueSet": "http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1" }, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "SN.1 / CQ.1" }, { "identity": "rim", "map": "IVL properties" } ] }, { "id": "Dosage.doseAndRate.dose[x]:doseQuantity.unit", "extension": [ { "url": "http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable", "valueBoolean": true } ], "path": "Dosage.doseAndRate.dose[x].unit", "short": "Unit representation", "definition": "A human-readable form of the unit.", "comment": "Note that FHIR strings SHALL NOT exceed 1MB in size", "requirements": "There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms.", "min": 1, "max": "1", "base": { "path": "Quantity.unit", "min": 0, "max": "1" }, "type": [ { "code": "string" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "(see OBX.6 etc.) / CQ.2" }, { "identity": "rim", "map": "PQ.unit" } ] }, { "id": "Dosage.doseAndRate.dose[x]:doseQuantity.system", "path": "Dosage.doseAndRate.dose[x].system", "short": "System that defines coded unit form", "definition": "The identification of the system that provides the coded form of the unit.", "comment": "see http://en.wikipedia.org/wiki/Uniform_resource_identifier", "requirements": "Need to know the system that defines the coded form of the unit.", "min": 1, "max": "1", "base": { "path": "Quantity.system", "min": 0, "max": "1" }, "type": [ { "code": "uri" } ], "condition": [ "ele-1", "qty-3" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "(see OBX.6 etc.) / CQ.2" }, { "identity": "rim", "map": "CO.codeSystem, PQ.translation.codeSystem" } ] }, { "id": "Dosage.doseAndRate.dose[x]:doseQuantity.code", "path": "Dosage.doseAndRate.dose[x].code", "short": "Coded form of the unit", "definition": "Hier wird die Dosiereinheit als Code angegeben. Hierbei sollte nach Möglichkeit folgendes ValueSet verwendet werden: https://fhir.kbv.de/ValueSet/KBV_VS_SFHIR_BMP_DOSIEREINHEIT.", "comment": "The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system.", "requirements": "Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest.", "min": 1, "max": "1", "base": { "path": "Quantity.code", "min": 0, "max": "1" }, "type": [ { "code": "code" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "(see OBX.6 etc.) / CQ.2" }, { "identity": "rim", "map": "PQ.code, MO.currency, PQ.translation.code" } ] }, { "id": "Dosage.doseAndRate.dose[x]:doseRange", "path": "Dosage.doseAndRate.dose[x]", "sliceName": "doseRange", "short": "Amount of medication per dose", "definition": "Hier wird die Dosiermenge mittels eines definierten Mengenbereichs angegeben.", "comment": "Note that this specifies the quantity of the specified medication, not the quantity for each active ingredient(s). Each ingredient amount can be communicated in the Medication resource. For example, if one wants to communicate that a tablet was 375 mg, where the dose was one tablet, you can use the Medication resource to document that the tablet was comprised of 375 mg of drug XYZ. Alternatively if the dose was 375 mg, then you may only need to use the Medication resource to indicate this was a tablet. If the example were an IV such as dopamine and you wanted to communicate that 400mg of dopamine was mixed in 500 ml of some IV solution, then this would all be communicated in the Medication resource. If the administration is not intended to be instantaneous (rate is present or timing has a duration), this can be specified to convey the total amount to be administered over the period of time as indicated by the schedule e.g. 500 ml in dose, with timing used to convey that this should be done over 4 hours.", "requirements": "The amount of therapeutic or other substance given at one administration event.", "min": 0, "max": "1", "base": { "path": "Dosage.doseAndRate.dose[x]", "min": 0, "max": "1" }, "type": [ { "code": "Range" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "RXO-2, RXE-3" }, { "identity": "rim", "map": ".doseQuantity" } ] }, { "id": "Dosage.doseAndRate.dose[x]:doseRange.id", "path": "Dosage.doseAndRate.dose[x].id", "representation": [ "xmlAttr" ], "short": "Unique id for inter-element referencing", "definition": "Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.", "min": 0, "max": "1", "base": { "path": "Element.id", "min": 0, "max": "1" }, "type": [ { "extension": [ { "url": "http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type", "valueUrl": "string" } ], "code": "http://hl7.org/fhirpath/System.String" } ], "mapping": [ { "identity": "rim", "map": "n/a" } ] }, { "id": "Dosage.doseAndRate.dose[x]:doseRange.extension", "path": "Dosage.doseAndRate.dose[x].extension", "slicing": { "discriminator": [ { "type": "value", "path": "url" } ], "description": "Extensions are always sliced by (at least) url", "rules": "open" }, "short": "Additional content defined by implementations", "definition": "May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.", "comment": "There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.", "alias": [ "extensions", "user content" ], "min": 0, "max": "*", "base": { "path": "Element.extension", "min": 0, "max": "*" }, "type": [ { "code": "Extension" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" }, { "key": "ext-1", "severity": "error", "human": "Must have either extensions or value[x], not both", "expression": "extension.exists() != value.exists()", "xpath": "exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])", "source": "http://hl7.org/fhir/StructureDefinition/Extension" } ], "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "rim", "map": "N/A" } ] }, { "id": "Dosage.doseAndRate.dose[x]:doseRange.low", "path": "Dosage.doseAndRate.dose[x].low", "short": "Low limit", "definition": "Hier wird die untere Grenze des definierten Mengenbereichs angegeben.", "comment": "If the low element is missing, the low boundary is not known.", "min": 0, "max": "1", "base": { "path": "Range.low", "min": 0, "max": "1" }, "type": [ { "code": "Quantity", "profile": [ "http://hl7.org/fhir/StructureDefinition/SimpleQuantity" ] } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" }, { "key": "qty-3", "severity": "error", "human": "If a code for the unit is present, the system SHALL also be present", "expression": "code.empty() or system.exists()", "xpath": "not(exists(f:code)) or exists(f:system)", "source": "http://hl7.org/fhir/StructureDefinition/Quantity" }, { "key": "sqty-1", "severity": "error", "human": "The comparator is not used on a SimpleQuantity", "expression": "comparator.empty()", "xpath": "not(exists(f:comparator))", "source": "http://hl7.org/fhir/StructureDefinition/SimpleQuantity" } ], "mustSupport": true, "isModifier": false, "isSummary": true, "binding": { "strength": "preferred", "valueSet": "https://fhir.kbv.de/ValueSet/KBV_VS_SFHIR_BMP_DOSIEREINHEIT" }, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "SN (see also Range) or CQ" }, { "identity": "rim", "map": "PQ, IVL, MO, CO, depending on the values" }, { "identity": "v2", "map": "NR.1" }, { "identity": "rim", "map": "./low" } ] }, { "id": "Dosage.doseAndRate.dose[x]:doseRange.low.id", "path": "Dosage.doseAndRate.dose[x].low.id", "representation": [ "xmlAttr" ], "short": "Unique id for inter-element referencing", "definition": "Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.", "min": 0, "max": "1", "base": { "path": "Element.id", "min": 0, "max": "1" }, "type": [ { "extension": [ { "url": "http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type", "valueUrl": "string" } ], "code": "http://hl7.org/fhirpath/System.String" } ], "mapping": [ { "identity": "rim", "map": "n/a" } ] }, { "id": "Dosage.doseAndRate.dose[x]:doseRange.low.extension", "path": "Dosage.doseAndRate.dose[x].low.extension", "slicing": { "discriminator": [ { "type": "value", "path": "url" } ], "description": "Extensions are always sliced by (at least) url", "rules": "open" }, "short": "Additional content defined by implementations", "definition": "May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.", "comment": "There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.", "alias": [ "extensions", "user content" ], "min": 0, "max": "*", "base": { "path": "Element.extension", "min": 0, "max": "*" }, "type": [ { "code": "Extension" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" }, { "key": "ext-1", "severity": "error", "human": "Must have either extensions or value[x], not both", "expression": "extension.exists() != value.exists()", "xpath": "exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])", "source": "http://hl7.org/fhir/StructureDefinition/Extension" } ], "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "rim", "map": "N/A" } ] }, { "id": "Dosage.doseAndRate.dose[x]:doseRange.low.value", "path": "Dosage.doseAndRate.dose[x].low.value", "short": "Numerical value (with implicit precision)", "definition": "Hier wird die Menge des Arzneimittels angegeben, die verabreicht/eingenommen wird.", "comment": "The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books).", "requirements": "Precision is handled implicitly in almost all cases of measurement.", "min": 1, "max": "1", "base": { "path": "Quantity.value", "min": 0, "max": "1" }, "type": [ { "code": "decimal" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "SN.2 / CQ - N/A" }, { "identity": "rim", "map": "PQ.value, CO.value, MO.value, IVL.high or IVL.low depending on the value" } ] }, { "id": "Dosage.doseAndRate.dose[x]:doseRange.low.comparator", "path": "Dosage.doseAndRate.dose[x].low.comparator", "short": "< | <= | >= | > - how to understand the value", "definition": "Not allowed to be used in this context", "comment": "Note that FHIR strings SHALL NOT exceed 1MB in size", "requirements": "Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology.", "min": 0, "max": "0", "base": { "path": "Quantity.comparator", "min": 0, "max": "1" }, "type": [ { "code": "code" } ], "meaningWhenMissing": "If there is no comparator, then there is no modification of the value", "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "isModifier": true, "isModifierReason": "This is labeled as \"Is Modifier\" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value", "isSummary": true, "binding": { "extension": [ { "url": "http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName", "valueString": "QuantityComparator" } ], "strength": "required", "description": "How the Quantity should be understood and represented.", "valueSet": "http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1" }, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "SN.1 / CQ.1" }, { "identity": "rim", "map": "IVL properties" } ] }, { "id": "Dosage.doseAndRate.dose[x]:doseRange.low.unit", "extension": [ { "url": "http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable", "valueBoolean": true } ], "path": "Dosage.doseAndRate.dose[x].low.unit", "short": "Unit representation", "definition": "A human-readable form of the unit.", "comment": "Note that FHIR strings SHALL NOT exceed 1MB in size", "requirements": "There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms.", "min": 1, "max": "1", "base": { "path": "Quantity.unit", "min": 0, "max": "1" }, "type": [ { "code": "string" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "(see OBX.6 etc.) / CQ.2" }, { "identity": "rim", "map": "PQ.unit" } ] }, { "id": "Dosage.doseAndRate.dose[x]:doseRange.low.system", "path": "Dosage.doseAndRate.dose[x].low.system", "short": "System that defines coded unit form", "definition": "The identification of the system that provides the coded form of the unit.", "comment": "see http://en.wikipedia.org/wiki/Uniform_resource_identifier", "requirements": "Need to know the system that defines the coded form of the unit.", "min": 1, "max": "1", "base": { "path": "Quantity.system", "min": 0, "max": "1" }, "type": [ { "code": "uri" } ], "condition": [ "ele-1", "qty-3" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "(see OBX.6 etc.) / CQ.2" }, { "identity": "rim", "map": "CO.codeSystem, PQ.translation.codeSystem" } ] }, { "id": "Dosage.doseAndRate.dose[x]:doseRange.low.code", "path": "Dosage.doseAndRate.dose[x].low.code", "short": "Coded form of the unit", "definition": "Hier wird die Dosiereinheit als Code angegeben. Hierbei sollte nach Möglichkeit folgendes ValueSet verwendet werden: https://fhir.kbv.de/ValueSet/KBV_VS_SFHIR_BMP_DOSIEREINHEIT.", "comment": "The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system.", "requirements": "Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest.", "min": 1, "max": "1", "base": { "path": "Quantity.code", "min": 0, "max": "1" }, "type": [ { "code": "code" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "(see OBX.6 etc.) / CQ.2" }, { "identity": "rim", "map": "PQ.code, MO.currency, PQ.translation.code" } ] }, { "id": "Dosage.doseAndRate.dose[x]:doseRange.high", "path": "Dosage.doseAndRate.dose[x].high", "short": "High limit", "definition": "Hier wird die obere Grenze des definierten Mengenbereichs angegeben.", "comment": "If the high element is missing, the high boundary is not known.", "min": 0, "max": "1", "base": { "path": "Range.high", "min": 0, "max": "1" }, "type": [ { "code": "Quantity", "profile": [ "http://hl7.org/fhir/StructureDefinition/SimpleQuantity" ] } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" }, { "key": "qty-3", "severity": "error", "human": "If a code for the unit is present, the system SHALL also be present", "expression": "code.empty() or system.exists()", "xpath": "not(exists(f:code)) or exists(f:system)", "source": "http://hl7.org/fhir/StructureDefinition/Quantity" }, { "key": "sqty-1", "severity": "error", "human": "The comparator is not used on a SimpleQuantity", "expression": "comparator.empty()", "xpath": "not(exists(f:comparator))", "source": "http://hl7.org/fhir/StructureDefinition/SimpleQuantity" } ], "mustSupport": true, "isModifier": false, "isSummary": true, "binding": { "strength": "preferred", "valueSet": "https://fhir.kbv.de/ValueSet/KBV_VS_SFHIR_BMP_DOSIEREINHEIT" }, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "SN (see also Range) or CQ" }, { "identity": "rim", "map": "PQ, IVL, MO, CO, depending on the values" }, { "identity": "v2", "map": "NR.2" }, { "identity": "rim", "map": "./high" } ] }, { "id": "Dosage.doseAndRate.dose[x]:doseRange.high.id", "path": "Dosage.doseAndRate.dose[x].high.id", "representation": [ "xmlAttr" ], "short": "Unique id for inter-element referencing", "definition": "Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.", "min": 0, "max": "1", "base": { "path": "Element.id", "min": 0, "max": "1" }, "type": [ { "extension": [ { "url": "http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type", "valueUrl": "string" } ], "code": "http://hl7.org/fhirpath/System.String" } ], "mapping": [ { "identity": "rim", "map": "n/a" } ] }, { "id": "Dosage.doseAndRate.dose[x]:doseRange.high.extension", "path": "Dosage.doseAndRate.dose[x].high.extension", "slicing": { "discriminator": [ { "type": "value", "path": "url" } ], "description": "Extensions are always sliced by (at least) url", "rules": "open" }, "short": "Additional content defined by implementations", "definition": "May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.", "comment": "There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.", "alias": [ "extensions", "user content" ], "min": 0, "max": "*", "base": { "path": "Element.extension", "min": 0, "max": "*" }, "type": [ { "code": "Extension" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" }, { "key": "ext-1", "severity": "error", "human": "Must have either extensions or value[x], not both", "expression": "extension.exists() != value.exists()", "xpath": "exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])", "source": "http://hl7.org/fhir/StructureDefinition/Extension" } ], "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "rim", "map": "N/A" } ] }, { "id": "Dosage.doseAndRate.dose[x]:doseRange.high.value", "path": "Dosage.doseAndRate.dose[x].high.value", "short": "Numerical value (with implicit precision)", "definition": "Hier wird die Menge des Arzneimittels angegeben, die verabreicht/eingenommen wird.", "comment": "The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books).", "requirements": "Precision is handled implicitly in almost all cases of measurement.", "min": 1, "max": "1", "base": { "path": "Quantity.value", "min": 0, "max": "1" }, "type": [ { "code": "decimal" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "SN.2 / CQ - N/A" }, { "identity": "rim", "map": "PQ.value, CO.value, MO.value, IVL.high or IVL.low depending on the value" } ] }, { "id": "Dosage.doseAndRate.dose[x]:doseRange.high.comparator", "path": "Dosage.doseAndRate.dose[x].high.comparator", "short": "< | <= | >= | > - how to understand the value", "definition": "Not allowed to be used in this context", "comment": "Note that FHIR strings SHALL NOT exceed 1MB in size", "requirements": "Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology.", "min": 0, "max": "0", "base": { "path": "Quantity.comparator", "min": 0, "max": "1" }, "type": [ { "code": "code" } ], "meaningWhenMissing": "If there is no comparator, then there is no modification of the value", "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "isModifier": true, "isModifierReason": "This is labeled as \"Is Modifier\" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value", "isSummary": true, "binding": { "extension": [ { "url": "http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName", "valueString": "QuantityComparator" } ], "strength": "required", "description": "How the Quantity should be understood and represented.", "valueSet": "http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1" }, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "SN.1 / CQ.1" }, { "identity": "rim", "map": "IVL properties" } ] }, { "id": "Dosage.doseAndRate.dose[x]:doseRange.high.unit", "extension": [ { "url": "http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable", "valueBoolean": true } ], "path": "Dosage.doseAndRate.dose[x].high.unit", "short": "Unit representation", "definition": "A human-readable form of the unit.", "comment": "Note that FHIR strings SHALL NOT exceed 1MB in size", "requirements": "There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms.", "min": 1, "max": "1", "base": { "path": "Quantity.unit", "min": 0, "max": "1" }, "type": [ { "code": "string" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "(see OBX.6 etc.) / CQ.2" }, { "identity": "rim", "map": "PQ.unit" } ] }, { "id": "Dosage.doseAndRate.dose[x]:doseRange.high.system", "path": "Dosage.doseAndRate.dose[x].high.system", "short": "System that defines coded unit form", "definition": "The identification of the system that provides the coded form of the unit.", "comment": "see http://en.wikipedia.org/wiki/Uniform_resource_identifier", "requirements": "Need to know the system that defines the coded form of the unit.", "min": 1, "max": "1", "base": { "path": "Quantity.system", "min": 0, "max": "1" }, "type": [ { "code": "uri" } ], "condition": [ "ele-1", "qty-3" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "(see OBX.6 etc.) / CQ.2" }, { "identity": "rim", "map": "CO.codeSystem, PQ.translation.codeSystem" } ] }, { "id": "Dosage.doseAndRate.dose[x]:doseRange.high.code", "path": "Dosage.doseAndRate.dose[x].high.code", "short": "Coded form of the unit", "definition": "Hier wird die Dosiereinheit als Code angegeben. Hierbei sollte nach Möglichkeit folgendes ValueSet verwendet werden: https://fhir.kbv.de/ValueSet/KBV_VS_SFHIR_BMP_DOSIEREINHEIT.", "comment": "The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system.", "requirements": "Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest.", "min": 1, "max": "1", "base": { "path": "Quantity.code", "min": 0, "max": "1" }, "type": [ { "code": "code" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "(see OBX.6 etc.) / CQ.2" }, { "identity": "rim", "map": "PQ.code, MO.currency, PQ.translation.code" } ] }, { "id": "Dosage.doseAndRate.rate[x]", "path": "Dosage.doseAndRate.rate[x]", "slicing": { "discriminator": [ { "type": "type", "path": "$this" } ], "ordered": false, "rules": "open" }, "short": "Amount of medication per unit of time", "definition": "Hier kann die Dosierung einer Rate über einen bestimmten Zeitraum abgebildet werden. Ein Beispiel dafür wäre die Rate einer Infusionslösung. Dabei kann entweder eine konkrete Verabreichungsgeschwindigkeit (z.B. eine Infusionslösung, welche mit 50 ml/h oder 100 mg/h verabreicht wird) oder ein Bereich für eine Verabreichungsgeschwindigkeit definiert werden (z.B. die Gabe einer Infusionslösung, welche mit 100 ml/h bis 150 mg/h verabreicht wird).", "comment": "It is possible to supply both a rate and a doseQuantity to provide full details about how the medication is to be administered and supplied. If the rate is intended to change over time, depending on local rules/regulations, each change should be captured as a new version of the MedicationRequest with an updated rate, or captured with a new MedicationRequest with the new rate.\r\rIt is possible to specify a rate over time (for example, 100 ml/hour) using either the rateRatio and rateQuantity. The rateQuantity approach requires systems to have the capability to parse UCUM grammer where ml/hour is included rather than a specific ratio where the time is specified as the denominator. Where a rate such as 500ml over 2 hours is specified, the use of rateRatio may be more semantically correct than specifying using a rateQuantity of 250 mg/hour.", "requirements": "Identifies the speed with which the medication was or will be introduced into the patient. Typically the rate for an infusion e.g. 100 ml per 1 hour or 100 ml/hr. May also be expressed as a rate per unit of time e.g. 500 ml per 2 hours. Other examples: 200 mcg/min or 200 mcg/1 minute; 1 liter/8 hours. Sometimes, a rate can imply duration when expressed as total volume / duration (e.g. 500mL/2 hours implies a duration of 2 hours). However, when rate doesn't imply duration (e.g. 250mL/hour), then the timing.repeat.duration is needed to convey the infuse over time period.", "min": 0, "max": "1", "base": { "path": "Dosage.doseAndRate.rate[x]", "min": 0, "max": "1" }, "type": [ { "code": "Ratio" }, { "code": "Range" }, { "code": "Quantity", "profile": [ "http://hl7.org/fhir/StructureDefinition/SimpleQuantity" ] } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "RXE22, RXE23, RXE-24" }, { "identity": "rim", "map": ".rateQuantity" } ] }, { "id": "Dosage.doseAndRate.rate[x]:rateRange", "path": "Dosage.doseAndRate.rate[x]", "sliceName": "rateRange", "short": "Amount of medication per unit of time", "definition": "Hier kann der Bereich für eine Rate/Verabreichungsgeschwindigkeit angegeben werden, mit welcher ein Arzneimittel verabreicht wird.\n\n**Beispiel:**\n* Eine Infusionslösung kann mit einer Geschwindigkeit von 100 ml/h (Untergrenze) bis 120 ml/h (Obergrenze) verabreicht werden.", "comment": "It is possible to supply both a rate and a doseQuantity to provide full details about how the medication is to be administered and supplied. If the rate is intended to change over time, depending on local rules/regulations, each change should be captured as a new version of the MedicationRequest with an updated rate, or captured with a new MedicationRequest with the new rate.\r\rIt is possible to specify a rate over time (for example, 100 ml/hour) using either the rateRatio and rateQuantity. The rateQuantity approach requires systems to have the capability to parse UCUM grammer where ml/hour is included rather than a specific ratio where the time is specified as the denominator. Where a rate such as 500ml over 2 hours is specified, the use of rateRatio may be more semantically correct than specifying using a rateQuantity of 250 mg/hour.", "requirements": "Identifies the speed with which the medication was or will be introduced into the patient. Typically the rate for an infusion e.g. 100 ml per 1 hour or 100 ml/hr. May also be expressed as a rate per unit of time e.g. 500 ml per 2 hours. Other examples: 200 mcg/min or 200 mcg/1 minute; 1 liter/8 hours. Sometimes, a rate can imply duration when expressed as total volume / duration (e.g. 500mL/2 hours implies a duration of 2 hours). However, when rate doesn't imply duration (e.g. 250mL/hour), then the timing.repeat.duration is needed to convey the infuse over time period.", "min": 0, "max": "1", "base": { "path": "Dosage.doseAndRate.rate[x]", "min": 0, "max": "1" }, "type": [ { "code": "Range" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "RXE22, RXE23, RXE-24" }, { "identity": "rim", "map": ".rateQuantity" } ] }, { "id": "Dosage.doseAndRate.rate[x]:rateRange.id", "path": "Dosage.doseAndRate.rate[x].id", "representation": [ "xmlAttr" ], "short": "Unique id for inter-element referencing", "definition": "Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.", "min": 0, "max": "1", "base": { "path": "Element.id", "min": 0, "max": "1" }, "type": [ { "extension": [ { "url": "http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type", "valueUrl": "string" } ], "code": "http://hl7.org/fhirpath/System.String" } ], "mapping": [ { "identity": "rim", "map": "n/a" } ] }, { "id": "Dosage.doseAndRate.rate[x]:rateRange.extension", "path": "Dosage.doseAndRate.rate[x].extension", "slicing": { "discriminator": [ { "type": "value", "path": "url" } ], "description": "Extensions are always sliced by (at least) url", "rules": "open" }, "short": "Additional content defined by implementations", "definition": "May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.", "comment": "There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.", "alias": [ "extensions", "user content" ], "min": 0, "max": "*", "base": { "path": "Element.extension", "min": 0, "max": "*" }, "type": [ { "code": "Extension" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" }, { "key": "ext-1", "severity": "error", "human": "Must have either extensions or value[x], not both", "expression": "extension.exists() != value.exists()", "xpath": "exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])", "source": "http://hl7.org/fhir/StructureDefinition/Extension" } ], "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "rim", "map": "N/A" } ] }, { "id": "Dosage.doseAndRate.rate[x]:rateRange.low", "path": "Dosage.doseAndRate.rate[x].low", "short": "Low limit", "definition": "Hier wird die untere Grenze des definierten Mengenbereichs angegeben.", "comment": "If the low element is missing, the low boundary is not known.", "min": 0, "max": "1", "base": { "path": "Range.low", "min": 0, "max": "1" }, "type": [ { "code": "Quantity", "profile": [ "http://hl7.org/fhir/StructureDefinition/SimpleQuantity" ] } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" }, { "key": "qty-3", "severity": "error", "human": "If a code for the unit is present, the system SHALL also be present", "expression": "code.empty() or system.exists()", "xpath": "not(exists(f:code)) or exists(f:system)", "source": "http://hl7.org/fhir/StructureDefinition/Quantity" }, { "key": "sqty-1", "severity": "error", "human": "The comparator is not used on a SimpleQuantity", "expression": "comparator.empty()", "xpath": "not(exists(f:comparator))", "source": "http://hl7.org/fhir/StructureDefinition/SimpleQuantity" } ], "mustSupport": true, "isModifier": false, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "SN (see also Range) or CQ" }, { "identity": "rim", "map": "PQ, IVL, MO, CO, depending on the values" }, { "identity": "v2", "map": "NR.1" }, { "identity": "rim", "map": "./low" } ] }, { "id": "Dosage.doseAndRate.rate[x]:rateRange.low.id", "path": "Dosage.doseAndRate.rate[x].low.id", "representation": [ "xmlAttr" ], "short": "Unique id for inter-element referencing", "definition": "Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.", "min": 0, "max": "1", "base": { "path": "Element.id", "min": 0, "max": "1" }, "type": [ { "extension": [ { "url": "http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type", "valueUrl": "string" } ], "code": "http://hl7.org/fhirpath/System.String" } ], "mapping": [ { "identity": "rim", "map": "n/a" } ] }, { "id": "Dosage.doseAndRate.rate[x]:rateRange.low.extension", "path": "Dosage.doseAndRate.rate[x].low.extension", "slicing": { "discriminator": [ { "type": "value", "path": "url" } ], "description": "Extensions are always sliced by (at least) url", "rules": "open" }, "short": "Additional content defined by implementations", "definition": "May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.", "comment": "There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.", "alias": [ "extensions", "user content" ], "min": 0, "max": "*", "base": { "path": "Element.extension", "min": 0, "max": "*" }, "type": [ { "code": "Extension" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" }, { "key": "ext-1", "severity": "error", "human": "Must have either extensions or value[x], not both", "expression": "extension.exists() != value.exists()", "xpath": "exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])", "source": "http://hl7.org/fhir/StructureDefinition/Extension" } ], "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "rim", "map": "N/A" } ] }, { "id": "Dosage.doseAndRate.rate[x]:rateRange.low.value", "path": "Dosage.doseAndRate.rate[x].low.value", "short": "Numerical value (with implicit precision)", "definition": "Hier wird die Menge angegeben, die über einen bestimmten Zeitraum verabreicht wird.", "comment": "The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books).", "requirements": "Precision is handled implicitly in almost all cases of measurement.", "min": 1, "max": "1", "base": { "path": "Quantity.value", "min": 0, "max": "1" }, "type": [ { "code": "decimal" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "SN.2 / CQ - N/A" }, { "identity": "rim", "map": "PQ.value, CO.value, MO.value, IVL.high or IVL.low depending on the value" } ] }, { "id": "Dosage.doseAndRate.rate[x]:rateRange.low.comparator", "path": "Dosage.doseAndRate.rate[x].low.comparator", "short": "< | <= | >= | > - how to understand the value", "definition": "Not allowed to be used in this context", "comment": "Note that FHIR strings SHALL NOT exceed 1MB in size", "requirements": "Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology.", "min": 0, "max": "0", "base": { "path": "Quantity.comparator", "min": 0, "max": "1" }, "type": [ { "code": "code" } ], "meaningWhenMissing": "If there is no comparator, then there is no modification of the value", "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "isModifier": true, "isModifierReason": "This is labeled as \"Is Modifier\" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value", "isSummary": true, "binding": { "extension": [ { "url": "http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName", "valueString": "QuantityComparator" } ], "strength": "required", "description": "How the Quantity should be understood and represented.", "valueSet": "http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1" }, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "SN.1 / CQ.1" }, { "identity": "rim", "map": "IVL properties" } ] }, { "id": "Dosage.doseAndRate.rate[x]:rateRange.low.unit", "extension": [ { "url": "http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable", "valueBoolean": true } ], "path": "Dosage.doseAndRate.rate[x].low.unit", "short": "Unit representation", "definition": "A human-readable form of the unit.", "comment": "Note that FHIR strings SHALL NOT exceed 1MB in size", "requirements": "There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms.", "min": 1, "max": "1", "base": { "path": "Quantity.unit", "min": 0, "max": "1" }, "type": [ { "code": "string" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "(see OBX.6 etc.) / CQ.2" }, { "identity": "rim", "map": "PQ.unit" } ] }, { "id": "Dosage.doseAndRate.rate[x]:rateRange.low.system", "path": "Dosage.doseAndRate.rate[x].low.system", "short": "System that defines coded unit form", "definition": "The identification of the system that provides the coded form of the unit.", "comment": "see http://en.wikipedia.org/wiki/Uniform_resource_identifier", "requirements": "Need to know the system that defines the coded form of the unit.", "min": 1, "max": "1", "base": { "path": "Quantity.system", "min": 0, "max": "1" }, "type": [ { "code": "uri" } ], "condition": [ "ele-1", "qty-3" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "(see OBX.6 etc.) / CQ.2" }, { "identity": "rim", "map": "CO.codeSystem, PQ.translation.codeSystem" } ] }, { "id": "Dosage.doseAndRate.rate[x]:rateRange.low.code", "path": "Dosage.doseAndRate.rate[x].low.code", "short": "Coded form of the unit", "definition": "Hier wird die Einheit der Rate/Verabreichungsgeschwingigkeit als Code angegeben.", "comment": "The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system.", "requirements": "Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest.", "min": 1, "max": "1", "base": { "path": "Quantity.code", "min": 0, "max": "1" }, "type": [ { "code": "code" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "(see OBX.6 etc.) / CQ.2" }, { "identity": "rim", "map": "PQ.code, MO.currency, PQ.translation.code" } ] }, { "id": "Dosage.doseAndRate.rate[x]:rateRange.high", "path": "Dosage.doseAndRate.rate[x].high", "short": "High limit", "definition": "Hier wird die obere Grenze des definierten Mengenbereichs angegeben.", "comment": "If the high element is missing, the high boundary is not known.", "min": 0, "max": "1", "base": { "path": "Range.high", "min": 0, "max": "1" }, "type": [ { "code": "Quantity", "profile": [ "http://hl7.org/fhir/StructureDefinition/SimpleQuantity" ] } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" }, { "key": "qty-3", "severity": "error", "human": "If a code for the unit is present, the system SHALL also be present", "expression": "code.empty() or system.exists()", "xpath": "not(exists(f:code)) or exists(f:system)", "source": "http://hl7.org/fhir/StructureDefinition/Quantity" }, { "key": "sqty-1", "severity": "error", "human": "The comparator is not used on a SimpleQuantity", "expression": "comparator.empty()", "xpath": "not(exists(f:comparator))", "source": "http://hl7.org/fhir/StructureDefinition/SimpleQuantity" } ], "mustSupport": true, "isModifier": false, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "SN (see also Range) or CQ" }, { "identity": "rim", "map": "PQ, IVL, MO, CO, depending on the values" }, { "identity": "v2", "map": "NR.2" }, { "identity": "rim", "map": "./high" } ] }, { "id": "Dosage.doseAndRate.rate[x]:rateRange.high.id", "path": "Dosage.doseAndRate.rate[x].high.id", "representation": [ "xmlAttr" ], "short": "Unique id for inter-element referencing", "definition": "Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.", "min": 0, "max": "1", "base": { "path": "Element.id", "min": 0, "max": "1" }, "type": [ { "extension": [ { "url": "http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type", "valueUrl": "string" } ], "code": "http://hl7.org/fhirpath/System.String" } ], "mapping": [ { "identity": "rim", "map": "n/a" } ] }, { "id": "Dosage.doseAndRate.rate[x]:rateRange.high.extension", "path": "Dosage.doseAndRate.rate[x].high.extension", "slicing": { "discriminator": [ { "type": "value", "path": "url" } ], "description": "Extensions are always sliced by (at least) url", "rules": "open" }, "short": "Additional content defined by implementations", "definition": "May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.", "comment": "There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.", "alias": [ "extensions", "user content" ], "min": 0, "max": "*", "base": { "path": "Element.extension", "min": 0, "max": "*" }, "type": [ { "code": "Extension" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" }, { "key": "ext-1", "severity": "error", "human": "Must have either extensions or value[x], not both", "expression": "extension.exists() != value.exists()", "xpath": "exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])", "source": "http://hl7.org/fhir/StructureDefinition/Extension" } ], "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "rim", "map": "N/A" } ] }, { "id": "Dosage.doseAndRate.rate[x]:rateRange.high.value", "path": "Dosage.doseAndRate.rate[x].high.value", "short": "Numerical value (with implicit precision)", "definition": "Hier wird die Menge angegeben, die über einen bestimmten Zeitraum verabreicht wird.", "comment": "The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books).", "requirements": "Precision is handled implicitly in almost all cases of measurement.", "min": 1, "max": "1", "base": { "path": "Quantity.value", "min": 0, "max": "1" }, "type": [ { "code": "decimal" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "SN.2 / CQ - N/A" }, { "identity": "rim", "map": "PQ.value, CO.value, MO.value, IVL.high or IVL.low depending on the value" } ] }, { "id": "Dosage.doseAndRate.rate[x]:rateRange.high.comparator", "path": "Dosage.doseAndRate.rate[x].high.comparator", "short": "< | <= | >= | > - how to understand the value", "definition": "Not allowed to be used in this context", "comment": "Note that FHIR strings SHALL NOT exceed 1MB in size", "requirements": "Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology.", "min": 0, "max": "0", "base": { "path": "Quantity.comparator", "min": 0, "max": "1" }, "type": [ { "code": "code" } ], "meaningWhenMissing": "If there is no comparator, then there is no modification of the value", "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "isModifier": true, "isModifierReason": "This is labeled as \"Is Modifier\" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value", "isSummary": true, "binding": { "extension": [ { "url": "http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName", "valueString": "QuantityComparator" } ], "strength": "required", "description": "How the Quantity should be understood and represented.", "valueSet": "http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1" }, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "SN.1 / CQ.1" }, { "identity": "rim", "map": "IVL properties" } ] }, { "id": "Dosage.doseAndRate.rate[x]:rateRange.high.unit", "extension": [ { "url": "http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable", "valueBoolean": true } ], "path": "Dosage.doseAndRate.rate[x].high.unit", "short": "Unit representation", "definition": "A human-readable form of the unit.", "comment": "Note that FHIR strings SHALL NOT exceed 1MB in size", "requirements": "There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms.", "min": 1, "max": "1", "base": { "path": "Quantity.unit", "min": 0, "max": "1" }, "type": [ { "code": "string" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "(see OBX.6 etc.) / CQ.2" }, { "identity": "rim", "map": "PQ.unit" } ] }, { "id": "Dosage.doseAndRate.rate[x]:rateRange.high.system", "path": "Dosage.doseAndRate.rate[x].high.system", "short": "System that defines coded unit form", "definition": "The identification of the system that provides the coded form of the unit.", "comment": "see http://en.wikipedia.org/wiki/Uniform_resource_identifier", "requirements": "Need to know the system that defines the coded form of the unit.", "min": 1, "max": "1", "base": { "path": "Quantity.system", "min": 0, "max": "1" }, "type": [ { "code": "uri" } ], "condition": [ "ele-1", "qty-3" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "(see OBX.6 etc.) / CQ.2" }, { "identity": "rim", "map": "CO.codeSystem, PQ.translation.codeSystem" } ] }, { "id": "Dosage.doseAndRate.rate[x]:rateRange.high.code", "path": "Dosage.doseAndRate.rate[x].high.code", "short": "Coded form of the unit", "definition": "Hier wird die Einheit der Rate/Verabreichungsgeschwingigkeit als Code angegeben.", "comment": "The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system.", "requirements": "Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest.", "min": 1, "max": "1", "base": { "path": "Quantity.code", "min": 0, "max": "1" }, "type": [ { "code": "code" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "(see OBX.6 etc.) / CQ.2" }, { "identity": "rim", "map": "PQ.code, MO.currency, PQ.translation.code" } ] }, { "id": "Dosage.doseAndRate.rate[x]:rateQuantity", "extension": [ { "url": "http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status", "valueCode": "normative" }, { "url": "http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version", "valueCode": "4.0.0" } ], "path": "Dosage.doseAndRate.rate[x]", "sliceName": "rateQuantity", "short": "A fixed quantity (no comparator)", "definition": "Hier wird die Rate/Verabreichungsgeschwindigkeit in Form einer festen Angabe abgebildet. Dabei wird die Geschwindigkeit bzw. Flussrate, mit der das Arzneimittel verabreicht wird, mit Hilfe einer kombinierten Einheit abgebildet (z.B. ml/h).\n\n**Beispiele für eine Flussrate mit einer kombinierten Einheit:**\n* 1 Milliliter pro Stunde (1 ml/h)\n* 1 Milligramm pro Stunde (1 mg/h)", "comment": "The context of use may frequently define what kind of quantity this is and therefore what kind of units can be used. The context of use may also restrict the values for the comparator.", "requirements": "Identifies the speed with which the medication was or will be introduced into the patient. Typically the rate for an infusion e.g. 100 ml per 1 hour or 100 ml/hr. May also be expressed as a rate per unit of time e.g. 500 ml per 2 hours. Other examples: 200 mcg/min or 200 mcg/1 minute; 1 liter/8 hours. Sometimes, a rate can imply duration when expressed as total volume / duration (e.g. 500mL/2 hours implies a duration of 2 hours). However, when rate doesn't imply duration (e.g. 250mL/hour), then the timing.repeat.duration is needed to convey the infuse over time period.", "min": 0, "max": "1", "base": { "path": "Dosage.doseAndRate.rate[x]", "min": 0, "max": "1" }, "type": [ { "code": "Quantity", "profile": [ "http://hl7.org/fhir/StructureDefinition/SimpleQuantity" ] } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" }, { "key": "qty-3", "severity": "error", "human": "If a code for the unit is present, the system SHALL also be present", "expression": "code.empty() or system.exists()", "xpath": "not(exists(f:code)) or exists(f:system)", "source": "http://hl7.org/fhir/StructureDefinition/Quantity" }, { "key": "sqty-1", "severity": "error", "human": "The comparator is not used on a SimpleQuantity", "expression": "comparator.empty()", "xpath": "not(exists(f:comparator))", "source": "http://hl7.org/fhir/StructureDefinition/SimpleQuantity" } ], "mustSupport": true, "isModifier": false, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "RXE22, RXE23, RXE-24" }, { "identity": "rim", "map": ".rateQuantity" }, { "identity": "v2", "map": "SN (see also Range) or CQ" }, { "identity": "rim", "map": "PQ, IVL, MO, CO, depending on the values" } ] }, { "id": "Dosage.doseAndRate.rate[x]:rateQuantity.id", "path": "Dosage.doseAndRate.rate[x].id", "representation": [ "xmlAttr" ], "short": "Unique id for inter-element referencing", "definition": "Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.", "min": 0, "max": "1", "base": { "path": "Element.id", "min": 0, "max": "1" }, "type": [ { "extension": [ { "url": "http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type", "valueUrl": "string" } ], "code": "http://hl7.org/fhirpath/System.String" } ], "mapping": [ { "identity": "rim", "map": "n/a" } ] }, { "id": "Dosage.doseAndRate.rate[x]:rateQuantity.extension", "path": "Dosage.doseAndRate.rate[x].extension", "slicing": { "discriminator": [ { "type": "value", "path": "url" } ], "description": "Extensions are always sliced by (at least) url", "rules": "open" }, "short": "Additional content defined by implementations", "definition": "May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.", "comment": "There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.", "alias": [ "extensions", "user content" ], "min": 0, "max": "*", "base": { "path": "Element.extension", "min": 0, "max": "*" }, "type": [ { "code": "Extension" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" }, { "key": "ext-1", "severity": "error", "human": "Must have either extensions or value[x], not both", "expression": "extension.exists() != value.exists()", "xpath": "exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])", "source": "http://hl7.org/fhir/StructureDefinition/Extension" } ], "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "rim", "map": "N/A" } ] }, { "id": "Dosage.doseAndRate.rate[x]:rateQuantity.value", "path": "Dosage.doseAndRate.rate[x].value", "short": "Numerical value (with implicit precision)", "definition": "Hier wird die Menge angegeben, die über einen bestimmten Zeitraum verabreicht wird.", "comment": "The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books).", "requirements": "Precision is handled implicitly in almost all cases of measurement.", "min": 1, "max": "1", "base": { "path": "Quantity.value", "min": 0, "max": "1" }, "type": [ { "code": "decimal" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "SN.2 / CQ - N/A" }, { "identity": "rim", "map": "PQ.value, CO.value, MO.value, IVL.high or IVL.low depending on the value" } ] }, { "id": "Dosage.doseAndRate.rate[x]:rateQuantity.comparator", "path": "Dosage.doseAndRate.rate[x].comparator", "short": "< | <= | >= | > - how to understand the value", "definition": "Not allowed to be used in this context", "comment": "Note that FHIR strings SHALL NOT exceed 1MB in size", "requirements": "Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology.", "min": 0, "max": "0", "base": { "path": "Quantity.comparator", "min": 0, "max": "1" }, "type": [ { "code": "code" } ], "meaningWhenMissing": "If there is no comparator, then there is no modification of the value", "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "isModifier": true, "isModifierReason": "This is labeled as \"Is Modifier\" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value", "isSummary": true, "binding": { "extension": [ { "url": "http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName", "valueString": "QuantityComparator" } ], "strength": "required", "description": "How the Quantity should be understood and represented.", "valueSet": "http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1" }, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "SN.1 / CQ.1" }, { "identity": "rim", "map": "IVL properties" } ] }, { "id": "Dosage.doseAndRate.rate[x]:rateQuantity.unit", "extension": [ { "url": "http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable", "valueBoolean": true } ], "path": "Dosage.doseAndRate.rate[x].unit", "short": "Unit representation", "definition": "Hier wird die Einheit der Rate/Verabreichungsgeschwingigkeit in menschenlesbarer Sprache angegeben.", "comment": "Note that FHIR strings SHALL NOT exceed 1MB in size", "requirements": "There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms.", "min": 1, "max": "1", "base": { "path": "Quantity.unit", "min": 0, "max": "1" }, "type": [ { "code": "string" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "(see OBX.6 etc.) / CQ.2" }, { "identity": "rim", "map": "PQ.unit" } ] }, { "id": "Dosage.doseAndRate.rate[x]:rateQuantity.system", "path": "Dosage.doseAndRate.rate[x].system", "short": "System that defines coded unit form", "definition": "The identification of the system that provides the coded form of the unit.", "comment": "see http://en.wikipedia.org/wiki/Uniform_resource_identifier", "requirements": "Need to know the system that defines the coded form of the unit.", "min": 1, "max": "1", "base": { "path": "Quantity.system", "min": 0, "max": "1" }, "type": [ { "code": "uri" } ], "condition": [ "ele-1", "qty-3" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "(see OBX.6 etc.) / CQ.2" }, { "identity": "rim", "map": "CO.codeSystem, PQ.translation.codeSystem" } ] }, { "id": "Dosage.doseAndRate.rate[x]:rateQuantity.code", "path": "Dosage.doseAndRate.rate[x].code", "short": "Coded form of the unit", "definition": "Hier wird die Einheit der Rate/Verabreichungsgeschwingigkeit als Code angegeben.", "comment": "The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system.", "requirements": "Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest.", "min": 1, "max": "1", "base": { "path": "Quantity.code", "min": 0, "max": "1" }, "type": [ { "code": "code" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "(see OBX.6 etc.) / CQ.2" }, { "identity": "rim", "map": "PQ.code, MO.currency, PQ.translation.code" } ] }, { "id": "Dosage.doseAndRate.rate[x]:rateRatio", "path": "Dosage.doseAndRate.rate[x]", "sliceName": "rateRatio", "short": "Amount of medication per unit of time", "definition": "Hier wird die Rate/Verabreichungsgeschwindigkeit in Form einer festen Angabe abgebildet. Dabei wird die Geschwindigkeit bzw. Flussrate, mit der das Arzneimittel verabreicht wird, mit Hilfe einer Einheit abgebildet, in der Zähler (z.B. 1 ml) und Nenner (z.B. 1 h) einzeln abgebildet werden.\n\n**Beispiele für eine Flussrate mit Angabe von Zähler und Nenner:**\n* 1 Mililiter pro 1 Stunde (1ml / 1h)\n* 1 Milligramm pro 1 Stunde (1mg / 1h)", "comment": "It is possible to supply both a rate and a doseQuantity to provide full details about how the medication is to be administered and supplied. If the rate is intended to change over time, depending on local rules/regulations, each change should be captured as a new version of the MedicationRequest with an updated rate, or captured with a new MedicationRequest with the new rate.\r\rIt is possible to specify a rate over time (for example, 100 ml/hour) using either the rateRatio and rateQuantity. The rateQuantity approach requires systems to have the capability to parse UCUM grammer where ml/hour is included rather than a specific ratio where the time is specified as the denominator. Where a rate such as 500ml over 2 hours is specified, the use of rateRatio may be more semantically correct than specifying using a rateQuantity of 250 mg/hour.", "requirements": "Identifies the speed with which the medication was or will be introduced into the patient. Typically the rate for an infusion e.g. 100 ml per 1 hour or 100 ml/hr. May also be expressed as a rate per unit of time e.g. 500 ml per 2 hours. Other examples: 200 mcg/min or 200 mcg/1 minute; 1 liter/8 hours. Sometimes, a rate can imply duration when expressed as total volume / duration (e.g. 500mL/2 hours implies a duration of 2 hours). However, when rate doesn't imply duration (e.g. 250mL/hour), then the timing.repeat.duration is needed to convey the infuse over time period.", "min": 0, "max": "1", "base": { "path": "Dosage.doseAndRate.rate[x]", "min": 0, "max": "1" }, "type": [ { "code": "Ratio" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "RXE22, RXE23, RXE-24" }, { "identity": "rim", "map": ".rateQuantity" } ] }, { "id": "Dosage.doseAndRate.rate[x]:rateRatio.id", "path": "Dosage.doseAndRate.rate[x].id", "representation": [ "xmlAttr" ], "short": "Unique id for inter-element referencing", "definition": "Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.", "min": 0, "max": "1", "base": { "path": "Element.id", "min": 0, "max": "1" }, "type": [ { "extension": [ { "url": "http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type", "valueUrl": "string" } ], "code": "http://hl7.org/fhirpath/System.String" } ], "mapping": [ { "identity": "rim", "map": "n/a" } ] }, { "id": "Dosage.doseAndRate.rate[x]:rateRatio.extension", "path": "Dosage.doseAndRate.rate[x].extension", "slicing": { "discriminator": [ { "type": "value", "path": "url" } ], "description": "Extensions are always sliced by (at least) url", "rules": "open" }, "short": "Additional content defined by implementations", "definition": "May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.", "comment": "There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.", "alias": [ "extensions", "user content" ], "min": 0, "max": "*", "base": { "path": "Element.extension", "min": 0, "max": "*" }, "type": [ { "code": "Extension" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" }, { "key": "ext-1", "severity": "error", "human": "Must have either extensions or value[x], not both", "expression": "extension.exists() != value.exists()", "xpath": "exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])", "source": "http://hl7.org/fhir/StructureDefinition/Extension" } ], "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "rim", "map": "N/A" } ] }, { "id": "Dosage.doseAndRate.rate[x]:rateRatio.numerator", "path": "Dosage.doseAndRate.rate[x].numerator", "short": "Numerator value", "definition": "Hier wird der Zähler einer Verabreichungsgeschwindigkeit bzw. Flussrate angegeben. Dieser besteht aus einem Wert und einer Einheit (bevorzugt eine Volumeneinheit oder eine Gewichtseinheit).\n\n**Beispiele für den Zähler einer Verabreichungsgeschwindigkeit:**\n* 10 Milliliter (10 ml)\n* 5 Milligramm (5 mg)", "comment": "The context of use may frequently define what kind of quantity this is and therefore what kind of units can be used. The context of use may also restrict the values for the comparator.", "min": 1, "max": "1", "base": { "path": "Ratio.numerator", "min": 0, "max": "1" }, "type": [ { "code": "Quantity" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" }, { "key": "qty-3", "severity": "error", "human": "If a code for the unit is present, the system SHALL also be present", "expression": "code.empty() or system.exists()", "xpath": "not(exists(f:code)) or exists(f:system)", "source": "http://hl7.org/fhir/StructureDefinition/Quantity" } ], "mustSupport": true, "isSummary": true, "binding": { "strength": "preferred", "valueSet": "https://fhir.kbv.de/ValueSet/KBV_VS_SFHIR_BMP_DOSIEREINHEIT" }, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "SN (see also Range) or CQ" }, { "identity": "rim", "map": "PQ, IVL, MO, CO, depending on the values" }, { "identity": "rim", "map": ".numerator" } ] }, { "id": "Dosage.doseAndRate.rate[x]:rateRatio.numerator.id", "path": "Dosage.doseAndRate.rate[x].numerator.id", "representation": [ "xmlAttr" ], "short": "Unique id for inter-element referencing", "definition": "Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.", "min": 0, "max": "1", "base": { "path": "Element.id", "min": 0, "max": "1" }, "type": [ { "extension": [ { "url": "http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type", "valueUrl": "string" } ], "code": "http://hl7.org/fhirpath/System.String" } ], "mapping": [ { "identity": "rim", "map": "n/a" } ] }, { "id": "Dosage.doseAndRate.rate[x]:rateRatio.numerator.extension", "path": "Dosage.doseAndRate.rate[x].numerator.extension", "slicing": { "discriminator": [ { "type": "value", "path": "url" } ], "description": "Extensions are always sliced by (at least) url", "rules": "open" }, "short": "Additional content defined by implementations", "definition": "May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.", "comment": "There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.", "alias": [ "extensions", "user content" ], "min": 0, "max": "*", "base": { "path": "Element.extension", "min": 0, "max": "*" }, "type": [ { "code": "Extension" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" }, { "key": "ext-1", "severity": "error", "human": "Must have either extensions or value[x], not both", "expression": "extension.exists() != value.exists()", "xpath": "exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])", "source": "http://hl7.org/fhir/StructureDefinition/Extension" } ], "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "rim", "map": "N/A" } ] }, { "id": "Dosage.doseAndRate.rate[x]:rateRatio.numerator.value", "path": "Dosage.doseAndRate.rate[x].numerator.value", "short": "Numerical value (with implicit precision)", "definition": "Hier wird die Menge angegeben, die über einen bestimmten Zeitraum verabreicht wird.", "comment": "The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books).", "requirements": "Precision is handled implicitly in almost all cases of measurement.", "min": 1, "max": "1", "base": { "path": "Quantity.value", "min": 0, "max": "1" }, "type": [ { "code": "decimal" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "SN.2 / CQ - N/A" }, { "identity": "rim", "map": "PQ.value, CO.value, MO.value, IVL.high or IVL.low depending on the value" } ] }, { "id": "Dosage.doseAndRate.rate[x]:rateRatio.numerator.comparator", "path": "Dosage.doseAndRate.rate[x].numerator.comparator", "short": "< | <= | >= | > - how to understand the value", "definition": "How the value should be understood and represented - whether the actual value is greater or less than the stated value due to measurement issues; e.g. if the comparator is \"<\" , then the real value is < stated value.", "comment": "Note that FHIR strings SHALL NOT exceed 1MB in size", "requirements": "Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology.", "min": 0, "max": "1", "base": { "path": "Quantity.comparator", "min": 0, "max": "1" }, "type": [ { "code": "code" } ], "meaningWhenMissing": "If there is no comparator, then there is no modification of the value", "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "isModifier": true, "isModifierReason": "This is labeled as \"Is Modifier\" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value", "isSummary": true, "binding": { "extension": [ { "url": "http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName", "valueString": "QuantityComparator" } ], "strength": "required", "description": "How the Quantity should be understood and represented.", "valueSet": "http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1" }, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "SN.1 / CQ.1" }, { "identity": "rim", "map": "IVL properties" } ] }, { "id": "Dosage.doseAndRate.rate[x]:rateRatio.numerator.unit", "extension": [ { "url": "http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable", "valueBoolean": true } ], "path": "Dosage.doseAndRate.rate[x].numerator.unit", "short": "Unit representation", "definition": "A human-readable form of the unit.", "comment": "Note that FHIR strings SHALL NOT exceed 1MB in size", "requirements": "There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms.", "min": 1, "max": "1", "base": { "path": "Quantity.unit", "min": 0, "max": "1" }, "type": [ { "code": "string" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "(see OBX.6 etc.) / CQ.2" }, { "identity": "rim", "map": "PQ.unit" } ] }, { "id": "Dosage.doseAndRate.rate[x]:rateRatio.numerator.system", "path": "Dosage.doseAndRate.rate[x].numerator.system", "short": "System that defines coded unit form", "definition": "The identification of the system that provides the coded form of the unit.", "comment": "see http://en.wikipedia.org/wiki/Uniform_resource_identifier", "requirements": "Need to know the system that defines the coded form of the unit.", "min": 1, "max": "1", "base": { "path": "Quantity.system", "min": 0, "max": "1" }, "type": [ { "code": "uri" } ], "condition": [ "ele-1", "qty-3" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "(see OBX.6 etc.) / CQ.2" }, { "identity": "rim", "map": "CO.codeSystem, PQ.translation.codeSystem" } ] }, { "id": "Dosage.doseAndRate.rate[x]:rateRatio.numerator.code", "path": "Dosage.doseAndRate.rate[x].numerator.code", "short": "Coded form of the unit", "definition": "Hier wird die Dosiereinheit als Code angegeben. Hierbei sollte nach Möglichkeit folgendes ValueSet verwendet werden: https://fhir.kbv.de/ValueSet/KBV_VS_SFHIR_BMP_DOSIEREINHEIT.", "comment": "The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system.", "requirements": "Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest.", "min": 1, "max": "1", "base": { "path": "Quantity.code", "min": 0, "max": "1" }, "type": [ { "code": "code" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "(see OBX.6 etc.) / CQ.2" }, { "identity": "rim", "map": "PQ.code, MO.currency, PQ.translation.code" } ] }, { "id": "Dosage.doseAndRate.rate[x]:rateRatio.denominator", "path": "Dosage.doseAndRate.rate[x].denominator", "short": "Denominator value", "definition": "Hier wird der Nenner einer Verabreichungsgeschwindigkeit bzw. Flussrate angegeben. Dieser entspricht einer Zeitspanne.\n\n**Beispiele für den Nenner einer Verabreichungsgeschwindigkeit:**\n* 3 Stunden (3h)\n* 1 Tag (1d)", "comment": "The context of use may frequently define what kind of quantity this is and therefore what kind of units can be used. The context of use may also restrict the values for the comparator.", "min": 1, "max": "1", "base": { "path": "Ratio.denominator", "min": 0, "max": "1" }, "type": [ { "code": "Quantity" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" }, { "key": "qty-3", "severity": "error", "human": "If a code for the unit is present, the system SHALL also be present", "expression": "code.empty() or system.exists()", "xpath": "not(exists(f:code)) or exists(f:system)", "source": "http://hl7.org/fhir/StructureDefinition/Quantity" } ], "mustSupport": true, "isSummary": true, "binding": { "strength": "required", "valueSet": "http://hl7.org/fhir/ValueSet/units-of-time" }, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "SN (see also Range) or CQ" }, { "identity": "rim", "map": "PQ, IVL, MO, CO, depending on the values" }, { "identity": "rim", "map": ".denominator" } ] }, { "id": "Dosage.doseAndRate.rate[x]:rateRatio.denominator.id", "path": "Dosage.doseAndRate.rate[x].denominator.id", "representation": [ "xmlAttr" ], "short": "Unique id for inter-element referencing", "definition": "Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.", "min": 0, "max": "1", "base": { "path": "Element.id", "min": 0, "max": "1" }, "type": [ { "extension": [ { "url": "http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type", "valueUrl": "string" } ], "code": "http://hl7.org/fhirpath/System.String" } ], "mapping": [ { "identity": "rim", "map": "n/a" } ] }, { "id": "Dosage.doseAndRate.rate[x]:rateRatio.denominator.extension", "path": "Dosage.doseAndRate.rate[x].denominator.extension", "slicing": { "discriminator": [ { "type": "value", "path": "url" } ], "description": "Extensions are always sliced by (at least) url", "rules": "open" }, "short": "Additional content defined by implementations", "definition": "May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.", "comment": "There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.", "alias": [ "extensions", "user content" ], "min": 0, "max": "*", "base": { "path": "Element.extension", "min": 0, "max": "*" }, "type": [ { "code": "Extension" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" }, { "key": "ext-1", "severity": "error", "human": "Must have either extensions or value[x], not both", "expression": "extension.exists() != value.exists()", "xpath": "exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])", "source": "http://hl7.org/fhir/StructureDefinition/Extension" } ], "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "rim", "map": "N/A" } ] }, { "id": "Dosage.doseAndRate.rate[x]:rateRatio.denominator.value", "path": "Dosage.doseAndRate.rate[x].denominator.value", "short": "Numerical value (with implicit precision)", "definition": "Hier wird die Menge angegeben, die über einen bestimmten Zeitraum verabreicht wird.", "comment": "The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books).", "requirements": "Precision is handled implicitly in almost all cases of measurement.", "min": 1, "max": "1", "base": { "path": "Quantity.value", "min": 0, "max": "1" }, "type": [ { "code": "decimal" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "SN.2 / CQ - N/A" }, { "identity": "rim", "map": "PQ.value, CO.value, MO.value, IVL.high or IVL.low depending on the value" } ] }, { "id": "Dosage.doseAndRate.rate[x]:rateRatio.denominator.comparator", "path": "Dosage.doseAndRate.rate[x].denominator.comparator", "short": "< | <= | >= | > - how to understand the value", "definition": "How the value should be understood and represented - whether the actual value is greater or less than the stated value due to measurement issues; e.g. if the comparator is \"<\" , then the real value is < stated value.", "comment": "Note that FHIR strings SHALL NOT exceed 1MB in size", "requirements": "Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology.", "min": 0, "max": "1", "base": { "path": "Quantity.comparator", "min": 0, "max": "1" }, "type": [ { "code": "code" } ], "meaningWhenMissing": "If there is no comparator, then there is no modification of the value", "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "isModifier": true, "isModifierReason": "This is labeled as \"Is Modifier\" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value", "isSummary": true, "binding": { "extension": [ { "url": "http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName", "valueString": "QuantityComparator" } ], "strength": "required", "description": "How the Quantity should be understood and represented.", "valueSet": "http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1" }, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "SN.1 / CQ.1" }, { "identity": "rim", "map": "IVL properties" } ] }, { "id": "Dosage.doseAndRate.rate[x]:rateRatio.denominator.unit", "extension": [ { "url": "http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable", "valueBoolean": true } ], "path": "Dosage.doseAndRate.rate[x].denominator.unit", "short": "Unit representation", "definition": "A human-readable form of the unit.", "comment": "Note that FHIR strings SHALL NOT exceed 1MB in size", "requirements": "There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms.", "min": 1, "max": "1", "base": { "path": "Quantity.unit", "min": 0, "max": "1" }, "type": [ { "code": "string" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "(see OBX.6 etc.) / CQ.2" }, { "identity": "rim", "map": "PQ.unit" } ] }, { "id": "Dosage.doseAndRate.rate[x]:rateRatio.denominator.system", "path": "Dosage.doseAndRate.rate[x].denominator.system", "short": "System that defines coded unit form", "definition": "The identification of the system that provides the coded form of the unit.", "comment": "see http://en.wikipedia.org/wiki/Uniform_resource_identifier", "requirements": "Need to know the system that defines the coded form of the unit.", "min": 1, "max": "1", "base": { "path": "Quantity.system", "min": 0, "max": "1" }, "type": [ { "code": "uri" } ], "condition": [ "ele-1", "qty-3" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "(see OBX.6 etc.) / CQ.2" }, { "identity": "rim", "map": "CO.codeSystem, PQ.translation.codeSystem" } ] }, { "id": "Dosage.doseAndRate.rate[x]:rateRatio.denominator.code", "path": "Dosage.doseAndRate.rate[x].denominator.code", "short": "Coded form of the unit", "definition": "Hier wird die Dosiereinheit als Code angegeben. Hierbei sollte nach Möglichkeit folgendes ValueSet verwendet werden: https://fhir.kbv.de/ValueSet/KBV_VS_SFHIR_BMP_DOSIEREINHEIT.", "comment": "The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system.", "requirements": "Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest.", "min": 1, "max": "1", "base": { "path": "Quantity.code", "min": 0, "max": "1" }, "type": [ { "code": "code" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "(see OBX.6 etc.) / CQ.2" }, { "identity": "rim", "map": "PQ.code, MO.currency, PQ.translation.code" } ] }, { "id": "Dosage.maxDosePerPeriod", "path": "Dosage.maxDosePerPeriod", "short": "Upper limit on medication per unit of time", "definition": "Hier wird die maximale Dosis angegeben, die in einer bestimmten Zeitspanne verabreicht werden darf. Bei kombinierten Dauer- und Bedarfsmedikationen (\"zusätzlich bei Bedarf\") wird über dieses Element die maximale Gesamtdosis der Einnahme/Verabreichung von Arzneimitteln mit gleichem Wirkstoff oder aus der gleichen Wirkstoffgruppe abgebildet.", "comment": "This is intended for use as an adjunct to the dosage when there is an upper cap. For example \"2 tablets every 4 hours to a maximum of 8/day\".", "requirements": "The maximum total quantity of a therapeutic substance that may be administered to a subject over the period of time. For example, 1000mg in 24 hours.", "min": 0, "max": "1", "base": { "path": "Dosage.maxDosePerPeriod", "min": 0, "max": "1" }, "type": [ { "code": "Ratio" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" }, { "key": "rat-1", "severity": "error", "human": "Numerator and denominator SHALL both be present, or both are absent. If both are absent, there SHALL be some extension present", "expression": "(numerator.empty() xor denominator.exists()) and (numerator.exists() or extension.exists())", "xpath": "(count(f:numerator) = count(f:denominator)) and ((count(f:numerator) > 0) or (count(f:extension) > 0))", "source": "http://hl7.org/fhir/StructureDefinition/Ratio" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "N/A" }, { "identity": "rim", "map": "RTO" }, { "identity": "v2", "map": "RXO-23, RXE-19" }, { "identity": "rim", "map": ".maxDoseQuantity" } ] }, { "id": "Dosage.maxDosePerPeriod.id", "path": "Dosage.maxDosePerPeriod.id", "representation": [ "xmlAttr" ], "short": "Unique id for inter-element referencing", "definition": "Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.", "min": 0, "max": "1", "base": { "path": "Element.id", "min": 0, "max": "1" }, "type": [ { "extension": [ { "url": "http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type", "valueUrl": "string" } ], "code": "http://hl7.org/fhirpath/System.String" } ], "mapping": [ { "identity": "rim", "map": "n/a" } ] }, { "id": "Dosage.maxDosePerPeriod.extension", "path": "Dosage.maxDosePerPeriod.extension", "slicing": { "discriminator": [ { "type": "value", "path": "url" } ], "description": "Extensions are always sliced by (at least) url", "rules": "open" }, "short": "Additional content defined by implementations", "definition": "May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.", "comment": "There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.", "alias": [ "extensions", "user content" ], "min": 0, "max": "*", "base": { "path": "Element.extension", "min": 0, "max": "*" }, "type": [ { "code": "Extension" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" }, { "key": "ext-1", "severity": "error", "human": "Must have either extensions or value[x], not both", "expression": "extension.exists() != value.exists()", "xpath": "exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])", "source": "http://hl7.org/fhir/StructureDefinition/Extension" } ], "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "rim", "map": "N/A" } ] }, { "id": "Dosage.maxDosePerPeriod.numerator", "path": "Dosage.maxDosePerPeriod.numerator", "short": "Numerator value", "definition": "Hier wird die Menge abgebildet. Dieser Wert entspricht dem Wert im Zähler der Angabe \"Maximale Menge pro Gabe\".", "comment": "The context of use may frequently define what kind of quantity this is and therefore what kind of units can be used. The context of use may also restrict the values for the comparator.", "min": 1, "max": "1", "base": { "path": "Ratio.numerator", "min": 0, "max": "1" }, "type": [ { "code": "Quantity" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" }, { "key": "qty-3", "severity": "error", "human": "If a code for the unit is present, the system SHALL also be present", "expression": "code.empty() or system.exists()", "xpath": "not(exists(f:code)) or exists(f:system)", "source": "http://hl7.org/fhir/StructureDefinition/Quantity" } ], "mustSupport": true, "isSummary": true, "binding": { "strength": "preferred", "valueSet": "https://fhir.kbv.de/ValueSet/KBV_VS_SFHIR_BMP_DOSIEREINHEIT" }, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "SN (see also Range) or CQ" }, { "identity": "rim", "map": "PQ, IVL, MO, CO, depending on the values" }, { "identity": "rim", "map": ".numerator" } ] }, { "id": "Dosage.maxDosePerPeriod.numerator.id", "path": "Dosage.maxDosePerPeriod.numerator.id", "representation": [ "xmlAttr" ], "short": "Unique id for inter-element referencing", "definition": "Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.", "min": 0, "max": "1", "base": { "path": "Element.id", "min": 0, "max": "1" }, "type": [ { "extension": [ { "url": "http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type", "valueUrl": "string" } ], "code": "http://hl7.org/fhirpath/System.String" } ], "mapping": [ { "identity": "rim", "map": "n/a" } ] }, { "id": "Dosage.maxDosePerPeriod.numerator.extension", "path": "Dosage.maxDosePerPeriod.numerator.extension", "slicing": { "discriminator": [ { "type": "value", "path": "url" } ], "description": "Extensions are always sliced by (at least) url", "rules": "open" }, "short": "Additional content defined by implementations", "definition": "May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.", "comment": "There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.", "alias": [ "extensions", "user content" ], "min": 0, "max": "*", "base": { "path": "Element.extension", "min": 0, "max": "*" }, "type": [ { "code": "Extension" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" }, { "key": "ext-1", "severity": "error", "human": "Must have either extensions or value[x], not both", "expression": "extension.exists() != value.exists()", "xpath": "exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])", "source": "http://hl7.org/fhir/StructureDefinition/Extension" } ], "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "rim", "map": "N/A" } ] }, { "id": "Dosage.maxDosePerPeriod.numerator.value", "path": "Dosage.maxDosePerPeriod.numerator.value", "short": "Numerical value (with implicit precision)", "definition": "Hier wird die Menge des Arzneimittels angegeben, die maximal innerhalb der Zeitspanne verabreicht/eingenommen werden darf.", "comment": "The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books).", "requirements": "Precision is handled implicitly in almost all cases of measurement.", "min": 1, "max": "1", "base": { "path": "Quantity.value", "min": 0, "max": "1" }, "type": [ { "code": "decimal" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "SN.2 / CQ - N/A" }, { "identity": "rim", "map": "PQ.value, CO.value, MO.value, IVL.high or IVL.low depending on the value" } ] }, { "id": "Dosage.maxDosePerPeriod.numerator.comparator", "path": "Dosage.maxDosePerPeriod.numerator.comparator", "short": "< | <= | >= | > - how to understand the value", "definition": "How the value should be understood and represented - whether the actual value is greater or less than the stated value due to measurement issues; e.g. if the comparator is \"<\" , then the real value is < stated value.", "comment": "Note that FHIR strings SHALL NOT exceed 1MB in size", "requirements": "Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology.", "min": 0, "max": "1", "base": { "path": "Quantity.comparator", "min": 0, "max": "1" }, "type": [ { "code": "code" } ], "meaningWhenMissing": "If there is no comparator, then there is no modification of the value", "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "isModifier": true, "isModifierReason": "This is labeled as \"Is Modifier\" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value", "isSummary": true, "binding": { "extension": [ { "url": "http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName", "valueString": "QuantityComparator" } ], "strength": "required", "description": "How the Quantity should be understood and represented.", "valueSet": "http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1" }, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "SN.1 / CQ.1" }, { "identity": "rim", "map": "IVL properties" } ] }, { "id": "Dosage.maxDosePerPeriod.numerator.unit", "extension": [ { "url": "http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable", "valueBoolean": true } ], "path": "Dosage.maxDosePerPeriod.numerator.unit", "short": "Unit representation", "definition": "A human-readable form of the unit.", "comment": "Note that FHIR strings SHALL NOT exceed 1MB in size", "requirements": "There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms.", "min": 1, "max": "1", "base": { "path": "Quantity.unit", "min": 0, "max": "1" }, "type": [ { "code": "string" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "(see OBX.6 etc.) / CQ.2" }, { "identity": "rim", "map": "PQ.unit" } ] }, { "id": "Dosage.maxDosePerPeriod.numerator.system", "path": "Dosage.maxDosePerPeriod.numerator.system", "short": "System that defines coded unit form", "definition": "The identification of the system that provides the coded form of the unit.", "comment": "see http://en.wikipedia.org/wiki/Uniform_resource_identifier", "requirements": "Need to know the system that defines the coded form of the unit.", "min": 1, "max": "1", "base": { "path": "Quantity.system", "min": 0, "max": "1" }, "type": [ { "code": "uri" } ], "condition": [ "ele-1", "qty-3" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "(see OBX.6 etc.) / CQ.2" }, { "identity": "rim", "map": "CO.codeSystem, PQ.translation.codeSystem" } ] }, { "id": "Dosage.maxDosePerPeriod.numerator.code", "path": "Dosage.maxDosePerPeriod.numerator.code", "short": "Coded form of the unit", "definition": "Hier wird die Dosiereinheit als Code angegeben. Hierbei sollte nach Möglichkeit folgendes ValueSet verwendet werden: https://fhir.kbv.de/ValueSet/KBV_VS_SFHIR_BMP_DOSIEREINHEIT.", "comment": "The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system.", "requirements": "Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest.", "min": 1, "max": "1", "base": { "path": "Quantity.code", "min": 0, "max": "1" }, "type": [ { "code": "code" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "(see OBX.6 etc.) / CQ.2" }, { "identity": "rim", "map": "PQ.code, MO.currency, PQ.translation.code" } ] }, { "id": "Dosage.maxDosePerPeriod.denominator", "path": "Dosage.maxDosePerPeriod.denominator", "short": "Denominator value", "definition": "Hier wird die Zeitspanne angegeben. Dieser Wert entspricht dem Wert im Nenner der Angabe \"Maximale Menge pro Gabe\".", "comment": "The context of use may frequently define what kind of quantity this is and therefore what kind of units can be used. The context of use may also restrict the values for the comparator.", "min": 1, "max": "1", "base": { "path": "Ratio.denominator", "min": 0, "max": "1" }, "type": [ { "code": "Quantity" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" }, { "key": "qty-3", "severity": "error", "human": "If a code for the unit is present, the system SHALL also be present", "expression": "code.empty() or system.exists()", "xpath": "not(exists(f:code)) or exists(f:system)", "source": "http://hl7.org/fhir/StructureDefinition/Quantity" } ], "mustSupport": true, "isSummary": true, "binding": { "strength": "required", "valueSet": "http://hl7.org/fhir/ValueSet/units-of-time" }, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "SN (see also Range) or CQ" }, { "identity": "rim", "map": "PQ, IVL, MO, CO, depending on the values" }, { "identity": "rim", "map": ".denominator" } ] }, { "id": "Dosage.maxDosePerPeriod.denominator.id", "path": "Dosage.maxDosePerPeriod.denominator.id", "representation": [ "xmlAttr" ], "short": "Unique id for inter-element referencing", "definition": "Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.", "min": 0, "max": "1", "base": { "path": "Element.id", "min": 0, "max": "1" }, "type": [ { "extension": [ { "url": "http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type", "valueUrl": "string" } ], "code": "http://hl7.org/fhirpath/System.String" } ], "mapping": [ { "identity": "rim", "map": "n/a" } ] }, { "id": "Dosage.maxDosePerPeriod.denominator.extension", "path": "Dosage.maxDosePerPeriod.denominator.extension", "slicing": { "discriminator": [ { "type": "value", "path": "url" } ], "description": "Extensions are always sliced by (at least) url", "rules": "open" }, "short": "Additional content defined by implementations", "definition": "May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.", "comment": "There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.", "alias": [ "extensions", "user content" ], "min": 0, "max": "*", "base": { "path": "Element.extension", "min": 0, "max": "*" }, "type": [ { "code": "Extension" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" }, { "key": "ext-1", "severity": "error", "human": "Must have either extensions or value[x], not both", "expression": "extension.exists() != value.exists()", "xpath": "exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])", "source": "http://hl7.org/fhir/StructureDefinition/Extension" } ], "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "rim", "map": "N/A" } ] }, { "id": "Dosage.maxDosePerPeriod.denominator.value", "path": "Dosage.maxDosePerPeriod.denominator.value", "short": "Numerical value (with implicit precision)", "definition": "Hier wird der Wert der Zeitspanne angegeben, innerhalb der die definierte Menge des Arzneimittels maximal verabreicht/eingenommen werden darf.", "comment": "The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books).", "requirements": "Precision is handled implicitly in almost all cases of measurement.", "min": 1, "max": "1", "base": { "path": "Quantity.value", "min": 0, "max": "1" }, "type": [ { "code": "decimal" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "SN.2 / CQ - N/A" }, { "identity": "rim", "map": "PQ.value, CO.value, MO.value, IVL.high or IVL.low depending on the value" } ] }, { "id": "Dosage.maxDosePerPeriod.denominator.comparator", "path": "Dosage.maxDosePerPeriod.denominator.comparator", "short": "< | <= | >= | > - how to understand the value", "definition": "How the value should be understood and represented - whether the actual value is greater or less than the stated value due to measurement issues; e.g. if the comparator is \"<\" , then the real value is < stated value.", "comment": "Note that FHIR strings SHALL NOT exceed 1MB in size", "requirements": "Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology.", "min": 0, "max": "1", "base": { "path": "Quantity.comparator", "min": 0, "max": "1" }, "type": [ { "code": "code" } ], "meaningWhenMissing": "If there is no comparator, then there is no modification of the value", "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "isModifier": true, "isModifierReason": "This is labeled as \"Is Modifier\" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value", "isSummary": true, "binding": { "extension": [ { "url": "http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName", "valueString": "QuantityComparator" } ], "strength": "required", "description": "How the Quantity should be understood and represented.", "valueSet": "http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1" }, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "SN.1 / CQ.1" }, { "identity": "rim", "map": "IVL properties" } ] }, { "id": "Dosage.maxDosePerPeriod.denominator.unit", "extension": [ { "url": "http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable", "valueBoolean": true } ], "path": "Dosage.maxDosePerPeriod.denominator.unit", "short": "Unit representation", "definition": "A human-readable form of the unit.", "comment": "Note that FHIR strings SHALL NOT exceed 1MB in size", "requirements": "There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms.", "min": 1, "max": "1", "base": { "path": "Quantity.unit", "min": 0, "max": "1" }, "type": [ { "code": "string" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "(see OBX.6 etc.) / CQ.2" }, { "identity": "rim", "map": "PQ.unit" } ] }, { "id": "Dosage.maxDosePerPeriod.denominator.system", "path": "Dosage.maxDosePerPeriod.denominator.system", "short": "System that defines coded unit form", "definition": "The identification of the system that provides the coded form of the unit.", "comment": "see http://en.wikipedia.org/wiki/Uniform_resource_identifier", "requirements": "Need to know the system that defines the coded form of the unit.", "min": 1, "max": "1", "base": { "path": "Quantity.system", "min": 0, "max": "1" }, "type": [ { "code": "uri" } ], "condition": [ "ele-1", "qty-3" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "(see OBX.6 etc.) / CQ.2" }, { "identity": "rim", "map": "CO.codeSystem, PQ.translation.codeSystem" } ] }, { "id": "Dosage.maxDosePerPeriod.denominator.code", "path": "Dosage.maxDosePerPeriod.denominator.code", "short": "Coded form of the unit", "definition": "Hier wird die Zeiteinheit als Code angegeben.", "comment": "The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system.", "requirements": "Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest.", "min": 1, "max": "1", "base": { "path": "Quantity.code", "min": 0, "max": "1" }, "type": [ { "code": "code" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "(see OBX.6 etc.) / CQ.2" }, { "identity": "rim", "map": "PQ.code, MO.currency, PQ.translation.code" } ] }, { "id": "Dosage.maxDosePerAdministration", "path": "Dosage.maxDosePerAdministration", "short": "Upper limit on medication per administration", "definition": "Hier wird die Dosiermenge mittels einer maximalen Menge angegeben.", "comment": "This is intended for use as an adjunct to the dosage when there is an upper cap. For example, a body surface area related dose with a maximum amount, such as 1.5 mg/m2 (maximum 2 mg) IV over 5 – 10 minutes would have doseQuantity of 1.5 mg/m2 and maxDosePerAdministration of 2 mg.", "requirements": "The maximum total quantity of a therapeutic substance that may be administered to a subject per administration.", "min": 0, "max": "1", "base": { "path": "Dosage.maxDosePerAdministration", "min": 0, "max": "1" }, "type": [ { "code": "Quantity", "profile": [ "http://hl7.org/fhir/StructureDefinition/SimpleQuantity" ] } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" }, { "key": "qty-3", "severity": "error", "human": "If a code for the unit is present, the system SHALL also be present", "expression": "code.empty() or system.exists()", "xpath": "not(exists(f:code)) or exists(f:system)", "source": "http://hl7.org/fhir/StructureDefinition/Quantity" }, { "key": "sqty-1", "severity": "error", "human": "The comparator is not used on a SimpleQuantity", "expression": "comparator.empty()", "xpath": "not(exists(f:comparator))", "source": "http://hl7.org/fhir/StructureDefinition/SimpleQuantity" } ], "mustSupport": true, "isModifier": false, "isSummary": true, "binding": { "strength": "preferred", "valueSet": "https://fhir.kbv.de/ValueSet/KBV_VS_SFHIR_BMP_DOSIEREINHEIT" }, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "SN (see also Range) or CQ" }, { "identity": "rim", "map": "PQ, IVL, MO, CO, depending on the values" }, { "identity": "rim", "map": "not supported" } ] }, { "id": "Dosage.maxDosePerAdministration.id", "path": "Dosage.maxDosePerAdministration.id", "representation": [ "xmlAttr" ], "short": "Unique id for inter-element referencing", "definition": "Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.", "min": 0, "max": "1", "base": { "path": "Element.id", "min": 0, "max": "1" }, "type": [ { "extension": [ { "url": "http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type", "valueUrl": "string" } ], "code": "http://hl7.org/fhirpath/System.String" } ], "mapping": [ { "identity": "rim", "map": "n/a" } ] }, { "id": "Dosage.maxDosePerAdministration.extension", "path": "Dosage.maxDosePerAdministration.extension", "slicing": { "discriminator": [ { "type": "value", "path": "url" } ], "description": "Extensions are always sliced by (at least) url", "rules": "open" }, "short": "Additional content defined by implementations", "definition": "May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.", "comment": "There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.", "alias": [ "extensions", "user content" ], "min": 0, "max": "*", "base": { "path": "Element.extension", "min": 0, "max": "*" }, "type": [ { "code": "Extension" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" }, { "key": "ext-1", "severity": "error", "human": "Must have either extensions or value[x], not both", "expression": "extension.exists() != value.exists()", "xpath": "exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])", "source": "http://hl7.org/fhir/StructureDefinition/Extension" } ], "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "rim", "map": "N/A" } ] }, { "id": "Dosage.maxDosePerAdministration.value", "path": "Dosage.maxDosePerAdministration.value", "short": "Numerical value (with implicit precision)", "definition": "Hier wird die Menge des Arzneimittels angegeben, die verabreicht/eingenommen wird.", "comment": "The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books).", "requirements": "Precision is handled implicitly in almost all cases of measurement.", "min": 1, "max": "1", "base": { "path": "Quantity.value", "min": 0, "max": "1" }, "type": [ { "code": "decimal" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "SN.2 / CQ - N/A" }, { "identity": "rim", "map": "PQ.value, CO.value, MO.value, IVL.high or IVL.low depending on the value" } ] }, { "id": "Dosage.maxDosePerAdministration.comparator", "path": "Dosage.maxDosePerAdministration.comparator", "short": "< | <= | >= | > - how to understand the value", "definition": "Not allowed to be used in this context", "comment": "Note that FHIR strings SHALL NOT exceed 1MB in size", "requirements": "Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology.", "min": 0, "max": "0", "base": { "path": "Quantity.comparator", "min": 0, "max": "1" }, "type": [ { "code": "code" } ], "meaningWhenMissing": "If there is no comparator, then there is no modification of the value", "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "isModifier": true, "isModifierReason": "This is labeled as \"Is Modifier\" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value", "isSummary": true, "binding": { "extension": [ { "url": "http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName", "valueString": "QuantityComparator" } ], "strength": "required", "description": "How the Quantity should be understood and represented.", "valueSet": "http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1" }, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "SN.1 / CQ.1" }, { "identity": "rim", "map": "IVL properties" } ] }, { "id": "Dosage.maxDosePerAdministration.unit", "extension": [ { "url": "http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable", "valueBoolean": true } ], "path": "Dosage.maxDosePerAdministration.unit", "short": "Unit representation", "definition": "A human-readable form of the unit.", "comment": "Note that FHIR strings SHALL NOT exceed 1MB in size", "requirements": "There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms.", "min": 1, "max": "1", "base": { "path": "Quantity.unit", "min": 0, "max": "1" }, "type": [ { "code": "string" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "(see OBX.6 etc.) / CQ.2" }, { "identity": "rim", "map": "PQ.unit" } ] }, { "id": "Dosage.maxDosePerAdministration.system", "path": "Dosage.maxDosePerAdministration.system", "short": "System that defines coded unit form", "definition": "The identification of the system that provides the coded form of the unit.", "comment": "see http://en.wikipedia.org/wiki/Uniform_resource_identifier", "requirements": "Need to know the system that defines the coded form of the unit.", "min": 1, "max": "1", "base": { "path": "Quantity.system", "min": 0, "max": "1" }, "type": [ { "code": "uri" } ], "condition": [ "ele-1", "qty-3" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "(see OBX.6 etc.) / CQ.2" }, { "identity": "rim", "map": "CO.codeSystem, PQ.translation.codeSystem" } ] }, { "id": "Dosage.maxDosePerAdministration.code", "path": "Dosage.maxDosePerAdministration.code", "short": "Coded form of the unit", "definition": "Hier wird die Dosiereinheit als Code angegeben. Hierbei sollte nach Möglichkeit folgendes ValueSet verwendet werden: https://fhir.kbv.de/ValueSet/KBV_VS_SFHIR_BMP_DOSIEREINHEIT.", "comment": "The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system.", "requirements": "Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest.", "min": 1, "max": "1", "base": { "path": "Quantity.code", "min": 0, "max": "1" }, "type": [ { "code": "code" } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" } ], "mustSupport": true, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "(see OBX.6 etc.) / CQ.2" }, { "identity": "rim", "map": "PQ.code, MO.currency, PQ.translation.code" } ] }, { "id": "Dosage.maxDosePerLifetime", "path": "Dosage.maxDosePerLifetime", "short": "Upper limit on medication per lifetime of the patient", "definition": "Upper limit on medication per lifetime of the patient.", "comment": "The context of use may frequently define what kind of quantity this is and therefore what kind of units can be used. The context of use may also restrict the values for the comparator.", "requirements": "The maximum total quantity of a therapeutic substance that may be administered per lifetime of the subject.", "min": 0, "max": "1", "base": { "path": "Dosage.maxDosePerLifetime", "min": 0, "max": "1" }, "type": [ { "code": "Quantity", "profile": [ "http://hl7.org/fhir/StructureDefinition/SimpleQuantity" ] } ], "condition": [ "ele-1" ], "constraint": [ { "key": "ele-1", "severity": "error", "human": "All FHIR elements must have a @value or children", "expression": "hasValue() or (children().count() > id.count())", "xpath": "@value|f:*|h:div", "source": "http://hl7.org/fhir/StructureDefinition/Element" }, { "key": "qty-3", "severity": "error", "human": "If a code for the unit is present, the system SHALL also be present", "expression": "code.empty() or system.exists()", "xpath": "not(exists(f:code)) or exists(f:system)", "source": "http://hl7.org/fhir/StructureDefinition/Quantity" }, { "key": "sqty-1", "severity": "error", "human": "The comparator is not used on a SimpleQuantity", "expression": "comparator.empty()", "xpath": "not(exists(f:comparator))", "source": "http://hl7.org/fhir/StructureDefinition/SimpleQuantity" } ], "isModifier": false, "isSummary": true, "mapping": [ { "identity": "rim", "map": "n/a" }, { "identity": "v2", "map": "SN (see also Range) or CQ" }, { "identity": "rim", "map": "PQ, IVL, MO, CO, depending on the values" }, { "identity": "rim", "map": "not supported" } ] } ] }, "differential": { "element": [ { "id": "Dosage.text", "path": "Dosage.text", "definition": "Hier kann die Dosieranweisung in Form eines Freitextes abgebildet werden.", "mustSupport": true }, { "id": "Dosage.additionalInstruction", "path": "Dosage.additionalInstruction", "definition": "Hier wird eine ergänzende Anweisung anhand eines entsprechenden Codes oder alternativ mit einem Freitext angegeben.", "mustSupport": true }, { "id": "Dosage.additionalInstruction.coding", "path": "Dosage.additionalInstruction.coding", "slicing": { "discriminator": [ { "type": "pattern", "path": "$this" } ], "rules": "open" }, "definition": "Hier werden Codes angegeben.", "comment": "Das MustSupport gilt nur für die vordefinierten Slices.", "mustSupport": true }, { "id": "Dosage.additionalInstruction.coding:snomed", "path": "Dosage.additionalInstruction.coding", "sliceName": "snomed", "min": 0, "max": "1", "patternCoding": { "system": "http://snomed.info/sct" }, "mustSupport": true, "binding": { "strength": "extensible", "valueSet": "https://gematik.de/fhir/terminology/ValueSet/epa-additional-dosage-instructions-snomed-ct-vs" } }, { "id": "Dosage.additionalInstruction.coding:snomed.system", "path": "Dosage.additionalInstruction.coding.system", "min": 1, "mustSupport": true }, { "id": "Dosage.additionalInstruction.coding:snomed.version", "path": "Dosage.additionalInstruction.coding.version", "min": 1, "mustSupport": true }, { "id": "Dosage.additionalInstruction.coding:snomed.code", "path": "Dosage.additionalInstruction.coding.code", "min": 1, "mustSupport": true }, { "id": "Dosage.additionalInstruction.coding:snomed.display", "path": "Dosage.additionalInstruction.coding.display", "min": 1, "mustSupport": true }, { "id": "Dosage.additionalInstruction.text", "path": "Dosage.additionalInstruction.text", "definition": "Hier wird ein Freitext eingetragen.", "mustSupport": true }, { "id": "Dosage.patientInstruction", "path": "Dosage.patientInstruction", "definition": "Hier können Hinweise zu Anwendung, Lagerung, Einnahme, etc. bzw. eine Gebrauchsanweisung in patientenverständlicher Sprache abgebildet werden.", "mustSupport": true }, { "id": "Dosage.timing", "path": "Dosage.timing", "mustSupport": true }, { "id": "Dosage.timing.event", "path": "Dosage.timing.event", "definition": "Hier kann ein Zeitpunkt einer Verabreichung/Einnahme abgebildet werden.", "mustSupport": true }, { "id": "Dosage.timing.repeat", "path": "Dosage.timing.repeat", "definition": "Hier kann angegeben werden, über welche Zeitspanne eine einzelne Verabreichung/Einnahme durchgeführt wird. Dabei müssen stets Wert und Einheit der Zeitspanne angegeben werden. Optional kann zusätzlich zu einer Zeitspanne eine maximale Zeitspanne für eine einzelne Verabreichung/Einnahme angegeben werden.\n\n**Beispiel:**\n* Die Dosierung der einzelnen Verabreichung/Einnahme eines Arzneimittels erfolgt über die Zeitspanne von 1 Stunde (1h).", "mustSupport": true }, { "id": "Dosage.timing.repeat.bounds[x]", "path": "Dosage.timing.repeat.bounds[x]", "slicing": { "discriminator": [ { "type": "type", "path": "$this" } ], "ordered": false, "rules": "open" }, "definition": "Hier wird abgebildet, in welchem Zeitraum oder in welcher Zeitspanne das Arzneimittel in der spezifischen Dosierung verabreicht/eingenommen wird. Zum Beispiel können hiermit spezifische Zeiträume bei der Auf- oder Ab-Dosierung von Medikamenten abgebildet werden.", "min": 1, "mustSupport": true }, { "id": "Dosage.timing.repeat.bounds[x]:boundsDuration", "path": "Dosage.timing.repeat.bounds[x]", "sliceName": "boundsDuration", "definition": "Hier kann angegeben, in welcher festen Zeitspanne das Arzneimittel in der spezifischen Dosierung verabreicht/eingenommen wird. Dabei beginnt und endet der mögliche Zeitraum der Einnahme in dem Zeitraum, welcher innerhalb des Elements \\\"Verabreichung/Einnahme: Zeitangabe-Auswahl\\\" -> \\\"Zeitraum\\\" auf der obersten Ebene des Profils \\\"Medikations-Information\\\" definiert ist.\n\n**Beispiel:**\n* Die Verabreichung/Einnahme eines Arzneimittels erfolgt für 5 Tage, wobei der unter \\\"Verabreichung/Einnahme: Zeitangabe-Auswahl\\\" -> \\\"Zeitraum\\\" -> \\\"von\\\" / \\\"bis\\\" definierte Zeitraum am 01.01.2024 beginnt (Element \\\"von\\\") und am 10.01.2024 (Element \\\"bis\\\") endet. Innerhalb dieses Zeitraums erfolgt die Einnahme für 5 Tage.", "min": 0, "max": "1", "type": [ { "code": "Duration" } ], "mustSupport": true }, { "id": "Dosage.timing.repeat.bounds[x]:boundsDuration.value", "path": "Dosage.timing.repeat.bounds[x].value", "definition": "Hier kann der Wert der Zeitspanne angegeben werden, innerhalb der das Arzneimittel verabreicht/eingenommen wird.", "min": 1, "mustSupport": true }, { "id": "Dosage.timing.repeat.bounds[x]:boundsDuration.unit", "path": "Dosage.timing.repeat.bounds[x].unit", "definition": "Hier wird die Zeiteinheit in menschenlesbarer Sprache angegeben.", "min": 1, "mustSupport": true }, { "id": "Dosage.timing.repeat.bounds[x]:boundsDuration.system", "path": "Dosage.timing.repeat.bounds[x].system", "min": 1, "mustSupport": true }, { "id": "Dosage.timing.repeat.bounds[x]:boundsDuration.code", "path": "Dosage.timing.repeat.bounds[x].code", "definition": "Hier wird die Zeiteinheit als Code angegeben.", "min": 1, "mustSupport": true }, { "id": "Dosage.timing.repeat.bounds[x]:boundsRange", "path": "Dosage.timing.repeat.bounds[x]", "sliceName": "boundsRange", "definition": "Hier kann angegeben, in welcher variablen Zeitspanne das Arzneimittel in der spezifischen Dosierung verabreicht/eingenommen wird. Dabei beginnt und endet der mögliche Zeitraum der Einnahme in dem Zeitraum, welcher innerhalb des Elements \\\"Verabreichung/Einnahme: Zeitangabe-Auswahl\\\" -> \\\"Zeitraum\\\" auf der obersten Ebene des Profils \\\"Medikations-Information\\\" definiert ist.\n\n**Beispiel:**\n* Die Verabreichung/Einnahme eines Arzneimittels erfolgt für 3 Tage (Untergrenze der Zeitspanne) bis 5 Tage (Obergrenze der Zeitspanne), wobei der unter \\\"Verabreichung/Einnahme: Zeitangabe-Auswahl\\\" -> \\\"Zeitraum\\\" -> \\\"von\\\" / \\\"bis\\\" definierte Zeitraum am 01.01.2024 beginnt (Element \\\"von\\\") und am 10.01.2024 (Element \\\"bis\\\") endet. Innerhalb dieses Zeitraums erfolgt die Einnahme für 3 Tage bis 5 Tage.", "min": 0, "max": "1", "type": [ { "code": "Range" } ], "mustSupport": true }, { "id": "Dosage.timing.repeat.bounds[x]:boundsRange.low", "path": "Dosage.timing.repeat.bounds[x].low", "definition": "Hier wird die Untergrenze der variablen Zeitspanne abgebildet.", "mustSupport": true }, { "id": "Dosage.timing.repeat.bounds[x]:boundsRange.low.value", "path": "Dosage.timing.repeat.bounds[x].low.value", "definition": "Hier kann der Wert der Zeitspanne angegeben werden, innerhalb der das Arzneimittel verabreicht/eingenommen wird.", "min": 1, "mustSupport": true }, { "id": "Dosage.timing.repeat.bounds[x]:boundsRange.low.unit", "path": "Dosage.timing.repeat.bounds[x].low.unit", "definition": "Hier wird die Zeiteinheit in menschenlesbarer Sprache angegeben.", "min": 1, "mustSupport": true }, { "id": "Dosage.timing.repeat.bounds[x]:boundsRange.low.system", "path": "Dosage.timing.repeat.bounds[x].low.system", "min": 1, "mustSupport": true }, { "id": "Dosage.timing.repeat.bounds[x]:boundsRange.low.code", "path": "Dosage.timing.repeat.bounds[x].low.code", "definition": "Hier wird die Zeiteinheit als Code angegeben.", "min": 1, "mustSupport": true }, { "id": "Dosage.timing.repeat.bounds[x]:boundsRange.high", "path": "Dosage.timing.repeat.bounds[x].high", "definition": "Hier wird die Obergrenze der variablen Zeitspanne abgebildet.", "mustSupport": true }, { "id": "Dosage.timing.repeat.bounds[x]:boundsRange.high.value", "path": "Dosage.timing.repeat.bounds[x].high.value", "definition": "Hier kann der Wert der Zeitspanne angegeben werden, innerhalb der das Arzneimittel verabreicht/eingenommen wird.", "min": 1, "mustSupport": true }, { "id": "Dosage.timing.repeat.bounds[x]:boundsRange.high.unit", "path": "Dosage.timing.repeat.bounds[x].high.unit", "definition": "Hier wird die Zeiteinheit in menschenlesbarer Sprache angegeben.", "min": 1, "mustSupport": true }, { "id": "Dosage.timing.repeat.bounds[x]:boundsRange.high.system", "path": "Dosage.timing.repeat.bounds[x].high.system", "min": 1, "mustSupport": true }, { "id": "Dosage.timing.repeat.bounds[x]:boundsRange.high.code", "path": "Dosage.timing.repeat.bounds[x].high.code", "definition": "Hier wird die Zeiteinheit als Code angegeben.", "min": 1, "mustSupport": true }, { "id": "Dosage.timing.repeat.bounds[x]:boundsPeriod", "path": "Dosage.timing.repeat.bounds[x]", "sliceName": "boundsPeriod", "definition": "Hier wird abgebildet, in welchem Zeitraum das Arzneimittel in der spezifischen Dosierung verabreicht/eingenommen wird.\n\n**Beispiel:**\n* Abbildung spezifischer Zeiträume bei der Auf- oder Ab-Dosierung von Medikamenten unter Angabe von konkreten Datumsangaben.", "min": 0, "max": "1", "type": [ { "code": "Period" } ], "mustSupport": true }, { "id": "Dosage.timing.repeat.bounds[x]:boundsPeriod.start", "path": "Dosage.timing.repeat.bounds[x].start", "definition": "Hier wird der Beginn des dosisspezifischen Zeitraumes angegeben.", "min": 1, "mustSupport": true }, { "id": "Dosage.timing.repeat.bounds[x]:boundsPeriod.end", "path": "Dosage.timing.repeat.bounds[x].end", "definition": "Hier wird das Ende des dosisspezifischen Zeitraumes angegeben.", "mustSupport": true }, { "id": "Dosage.timing.repeat.count", "path": "Dosage.timing.repeat.count", "definition": "Hier kann die absolute Anzahl der Wiederholungen einer Verabreichung/Einnahme eines Arzneimittels als Zahl angegeben werden.\n\n**Beispiel:**\n* Anzahl der Einnahmen eines Arzneimittels = 5", "mustSupport": true }, { "id": "Dosage.timing.repeat.countMax", "path": "Dosage.timing.repeat.countMax", "definition": "Hier kann die maximale Anzahl der Wiederholungen einer Verabreichung/Einnahme eines Arzneimittels als Zahl angegeben werden. Eine maximale Anzahl der Wiederholungen kann nur angegeben werden, wenn eine absolute Anzahl der Wiederholungen einer Verabreichung/Einnahme eines Arzneimittels angegeben ist.\n\n**Beispiel:**\n* Maximale Anzahl der Einnahmen eines Arzneimittels = 10", "mustSupport": true }, { "id": "Dosage.timing.repeat.duration", "path": "Dosage.timing.repeat.duration", "definition": "Hier kann der Wert der Zeitspanne angegeben werden, innerhalb der das Arzneimittel verabreicht/eingenommen wird.", "mustSupport": true }, { "id": "Dosage.timing.repeat.durationMax", "path": "Dosage.timing.repeat.durationMax", "definition": "Hier kann der maximale Wert der Zeitspanne angegeben werden, innerhalb der das Arzneimittel verabreicht/eingenommen wird. Eine maximale Zeitspanne kann nur angegeben werden, wenn eine feste Zeitspanne für die Dauer der einzelnen Verabreichung/Einnahme angegeben wird.", "mustSupport": true }, { "id": "Dosage.timing.repeat.durationUnit", "path": "Dosage.timing.repeat.durationUnit", "definition": "Hier wird die Zeiteinheit angegeben.", "mustSupport": true }, { "id": "Dosage.timing.repeat.frequency", "path": "Dosage.timing.repeat.frequency", "definition": "Hier wird angegeben, mit welcher Frequenz das Arzneimittel innerhalb einer bestimmten Zeitspanne verabreicht/eingenommen wird.", "mustSupport": true }, { "id": "Dosage.timing.repeat.frequencyMax", "path": "Dosage.timing.repeat.frequencyMax", "definition": "Hier wird angegeben, mit welcher Frequenz das Arzneimittel innerhalb einer bestimmten Zeitspanne verabreicht/eingenommen wird.", "mustSupport": true }, { "id": "Dosage.timing.repeat.period", "path": "Dosage.timing.repeat.period", "definition": "Hier wird der absolute Wert der Zeitspanne angegeben, innerhalb der die definierte Anzahl der Verabreichungen/Einnahmen durchgeführt wird.", "mustSupport": true }, { "id": "Dosage.timing.repeat.periodMax", "path": "Dosage.timing.repeat.periodMax", "definition": "Hier wird der maximale Wert der Zeitspanne angegeben, innerhalb der die definierte Anzahl der Verabreichungen/Einnahmen durchgeführt wird. Wenn ein maximaler Wert der Zeitspanne angegeben wird, muss ein absoluter Wert der Zeitspanne angegeben werden. In diesem Fall definieren die beiden Werte \"Absoluter Wert der Zeitspanne\" und \"Maximaler Wert der Zeitspanne\" einen Bereich für die Zeitspanne. Der absolute Wert der Zeitspanne entspricht dann der Untergrenze für einen Bereich der Zeitspanne und der maximale Wert der Zeitspanne der Obergrenze für den Bereich der Zeitspanne.", "mustSupport": true }, { "id": "Dosage.timing.repeat.periodUnit", "path": "Dosage.timing.repeat.periodUnit", "definition": "Hier wird die Zeiteinheit angegeben.", "mustSupport": true }, { "id": "Dosage.timing.repeat.dayOfWeek", "path": "Dosage.timing.repeat.dayOfWeek", "definition": "Hier wird der Wochentag, an dem das Arzneimittel verabreicht/eingenommen werden soll, angegeben.", "mustSupport": true }, { "id": "Dosage.timing.repeat.timeOfDay", "path": "Dosage.timing.repeat.timeOfDay", "definition": "Hier werden Uhrzeiten angegeben, zu denen das Arzneimittel verabreicht/eingenommen wird.", "mustSupport": true }, { "id": "Dosage.timing.repeat.when", "path": "Dosage.timing.repeat.when", "slicing": { "discriminator": [ { "type": "pattern", "path": "$this" } ], "rules": "open" }, "definition": "Hier werden Tageszeiten angegeben, zu denen das Arzneimittel verabreicht/eingenommen wird.\nErgänzend können Zusatzinformationen angegeben werden, die die Verabreichung/Einnahme des Arzneimittels in Bezug zu Mahlzeiten und Schlafzeiten abbilden.", "mustSupport": true }, { "id": "Dosage.timing.repeat.when:period-of-day", "path": "Dosage.timing.repeat.when", "sliceName": "period-of-day", "definition": "Hier werden Tageszeiten, zu denen das Arzneimittel verabreicht/eingenommen wird, als Code aus dem FHIR ValueSet http://hl7.org/fhir/ValueSet/event-timing angegeben. Dabei spiegeln die vier möglichen Konzepte \"Morgens\", \"Mittags\", \"Abends\", \"Nachts\" das in der Praxis übliche \"4er-Einnahmeschema\" wieder (beispielsweise \"0-1-0-0\" entspricht dem Konzept \"Einnahme von einer Tablette Mittags\").", "min": 0, "max": "1", "mustSupport": true, "binding": { "strength": "required", "valueSet": "https://gematik.de/fhir/terminology/ValueSet/epa-event-timing-vs" } }, { "id": "Dosage.timing.repeat.when:meal-sleep-times", "path": "Dosage.timing.repeat.when", "sliceName": "meal-sleep-times", "definition": "Hier wird eine mahlzeiten- und schlafzeitenabhängige Zusatzinformation zur Einnahme eines Arzneimittels als Code aus dem FHIR ValueSet http://hl7.org/fhir/ValueSet/event-timing angegeben.", "min": 0, "max": "*", "mustSupport": true, "binding": { "strength": "required", "valueSet": "https://gematik.de/fhir/terminology/ValueSet/epa-timing-event-vs" } }, { "id": "Dosage.timing.repeat.offset", "path": "Dosage.timing.repeat.offset", "definition": "Hier wird der Zeitabstand der Verabreichung/Einnahme eines Arzneimittels zu einer Mahlzeit oder der Schlafzeit in Minuten angegeben.", "mustSupport": true }, { "id": "Dosage.asNeeded[x]", "path": "Dosage.asNeeded[x]", "slicing": { "discriminator": [ { "type": "type", "path": "$this" } ], "ordered": false, "rules": "open" }, "definition": "Hier werden Angaben zur Dosierung als Bedarfsmedikation gemacht.", "mustSupport": true }, { "id": "Dosage.asNeeded[x]:asNeededBoolean", "path": "Dosage.asNeeded[x]", "sliceName": "asNeededBoolean", "definition": "Hier wird angegeben, ob es sich um eine Bedarfsmedikation handelt.", "min": 0, "max": "1", "type": [ { "code": "boolean" } ], "mustSupport": true }, { "id": "Dosage.asNeeded[x]:asNeededCodeableConcept", "path": "Dosage.asNeeded[x]", "sliceName": "asNeededCodeableConcept", "definition": "Hier wird angegeben, welcher Zustand die Bedingung zur Verabreichung/Einnahme der Bedarfsmedikation ist, z. B. Schmerzen, Übelkeit, usw.", "min": 0, "max": "1", "type": [ { "code": "CodeableConcept" } ], "mustSupport": true }, { "id": "Dosage.asNeeded[x]:asNeededCodeableConcept.coding", "path": "Dosage.asNeeded[x].coding", "slicing": { "discriminator": [ { "type": "pattern", "path": "$this" } ], "rules": "open" }, "definition": "Hier werden Codes angegeben.", "comment": "Das MustSupport gilt nur für die vordefinierten Slices.", "mustSupport": true }, { "id": "Dosage.asNeeded[x]:asNeededCodeableConcept.coding:snomed", "path": "Dosage.asNeeded[x].coding", "sliceName": "snomed", "definition": "Hier wird ein Code aus dem Code-System SNOMED CT® eingetragen. Die Bedingung zum Auslösen einer Bedarfsmedikation ist ein breites Feld, welches das gesamte Spektrum der Medizin umfassen kann und ist deshalb in FHIR® als Example-binding von SNOMED CT®-Konzepten in den Subklassen der SCTID 404684003 vorgesehen, siehe http://hl7.org/fhir/ValueSet/medication-as-needed-reason.", "min": 0, "max": "1", "patternCoding": { "system": "http://snomed.info/sct" }, "mustSupport": true, "binding": { "strength": "required", "valueSet": "https://gematik.de/fhir/terminology/ValueSet/epa-prn-medication-reason-snomed-ct-vs" } }, { "id": "Dosage.asNeeded[x]:asNeededCodeableConcept.coding:snomed.system", "path": "Dosage.asNeeded[x].coding.system", "min": 1, "mustSupport": true }, { "id": "Dosage.asNeeded[x]:asNeededCodeableConcept.coding:snomed.version", "path": "Dosage.asNeeded[x].coding.version", "min": 1, "mustSupport": true }, { "id": "Dosage.asNeeded[x]:asNeededCodeableConcept.coding:snomed.code", "path": "Dosage.asNeeded[x].coding.code", "min": 1, "mustSupport": true }, { "id": "Dosage.asNeeded[x]:asNeededCodeableConcept.coding:snomed.display", "path": "Dosage.asNeeded[x].coding.display", "min": 1, "mustSupport": true }, { "id": "Dosage.asNeeded[x]:asNeededCodeableConcept.text", "path": "Dosage.asNeeded[x].text", "definition": "Hier wird die Bedingung zur Verabreichung/Einnahme der Bedarfsmedikation als Freitext angegeben.", "mustSupport": true }, { "id": "Dosage.site", "path": "Dosage.site", "mustSupport": true }, { "id": "Dosage.site.coding", "path": "Dosage.site.coding", "slicing": { "discriminator": [ { "type": "pattern", "path": "$this" } ], "rules": "open" }, "comment": "Das MustSupport gilt nur für die vordefinierten Slices.", "mustSupport": true }, { "id": "Dosage.site.coding:snomed", "path": "Dosage.site.coding", "sliceName": "snomed", "min": 0, "max": "1", "patternCoding": { "system": "http://snomed.info/sct" }, "mustSupport": true }, { "id": "Dosage.site.coding:snomed.system", "path": "Dosage.site.coding.system", "min": 1, "mustSupport": true }, { "id": "Dosage.site.coding:snomed.version", "path": "Dosage.site.coding.version", "min": 1, "mustSupport": true }, { "id": "Dosage.site.coding:snomed.code", "path": "Dosage.site.coding.code", "min": 1, "mustSupport": true }, { "id": "Dosage.site.coding:snomed.display", "path": "Dosage.site.coding.display", "min": 1, "mustSupport": true }, { "id": "Dosage.site.text", "path": "Dosage.site.text", "mustSupport": true }, { "id": "Dosage.route", "path": "Dosage.route", "mustSupport": true }, { "id": "Dosage.route.coding", "path": "Dosage.route.coding", "slicing": { "discriminator": [ { "type": "pattern", "path": "$this" } ], "rules": "open" }, "comment": "Das MustSupport gilt nur für die vordefinierten Slices.", "mustSupport": true }, { "id": "Dosage.route.coding:snomed", "path": "Dosage.route.coding", "sliceName": "snomed", "min": 0, "max": "1", "patternCoding": { "system": "http://snomed.info/sct" }, "mustSupport": true, "binding": { "strength": "extensible", "valueSet": "https://gematik.de/fhir/terminology/ValueSet/epa-route-of-administration-snomed-ct-vs" } }, { "id": "Dosage.route.coding:snomed.system", "path": "Dosage.route.coding.system", "min": 1, "mustSupport": true }, { "id": "Dosage.route.coding:snomed.version", "path": "Dosage.route.coding.version", "min": 1, "mustSupport": true }, { "id": "Dosage.route.coding:snomed.code", "path": "Dosage.route.coding.code", "min": 1, "mustSupport": true }, { "id": "Dosage.route.coding:snomed.display", "path": "Dosage.route.coding.display", "min": 1, "mustSupport": true }, { "id": "Dosage.route.coding:edqm", "path": "Dosage.route.coding", "sliceName": "edqm", "min": 0, "max": "1", "mustSupport": true, "binding": { "strength": "required", "valueSet": "https://gematik.de/fhir/terminology/ValueSet/epa-medicine-route-of-administration-edqm-vs" } }, { "id": "Dosage.route.coding:edqm.system", "path": "Dosage.route.coding.system", "min": 1, "mustSupport": true }, { "id": "Dosage.route.coding:edqm.code", "path": "Dosage.route.coding.code", "min": 1, "mustSupport": true }, { "id": "Dosage.route.coding:edqm.display", "path": "Dosage.route.coding.display", "min": 1, "mustSupport": true }, { "id": "Dosage.route.text", "path": "Dosage.route.text", "mustSupport": true }, { "id": "Dosage.doseAndRate", "path": "Dosage.doseAndRate", "max": "1", "mustSupport": true }, { "id": "Dosage.doseAndRate.dose[x]", "path": "Dosage.doseAndRate.dose[x]", "slicing": { "discriminator": [ { "type": "type", "path": "$this" } ], "ordered": false, "rules": "open" }, "definition": "Hier kann die Dosierung einer Gabe bzw. Einnahme abgebildet werden. Dabei kann es sich um eine definierte Menge für eine Einnahme handeln (z.B. die Einnahme von 5 mg eines Wirkstoffs im Rahmen einer Einnahme) oder um einen definierten Mengenbereich (z.B. die Einnahme von 5 mg bis 10 mg eines Wirkstoffs im Rahmen einer Einnahme).", "mustSupport": true }, { "id": "Dosage.doseAndRate.dose[x]:doseQuantity", "path": "Dosage.doseAndRate.dose[x]", "sliceName": "doseQuantity", "definition": "Hier wird die Dosiermenge mittels einer definierten Menge angegeben.", "min": 0, "max": "1", "type": [ { "code": "Quantity", "profile": [ "http://hl7.org/fhir/StructureDefinition/SimpleQuantity" ] } ], "mustSupport": true, "binding": { "strength": "preferred", "valueSet": "https://fhir.kbv.de/ValueSet/KBV_VS_SFHIR_BMP_DOSIEREINHEIT" } }, { "id": "Dosage.doseAndRate.dose[x]:doseQuantity.value", "path": "Dosage.doseAndRate.dose[x].value", "definition": "Hier wird die Menge des Arzneimittels angegeben, die verabreicht/eingenommen wird.", "min": 1, "mustSupport": true }, { "id": "Dosage.doseAndRate.dose[x]:doseQuantity.unit", "path": "Dosage.doseAndRate.dose[x].unit", "min": 1, "mustSupport": true }, { "id": "Dosage.doseAndRate.dose[x]:doseQuantity.system", "path": "Dosage.doseAndRate.dose[x].system", "min": 1, "mustSupport": true }, { "id": "Dosage.doseAndRate.dose[x]:doseQuantity.code", "path": "Dosage.doseAndRate.dose[x].code", "definition": "Hier wird die Dosiereinheit als Code angegeben. Hierbei sollte nach Möglichkeit folgendes ValueSet verwendet werden: https://fhir.kbv.de/ValueSet/KBV_VS_SFHIR_BMP_DOSIEREINHEIT.", "min": 1, "mustSupport": true }, { "id": "Dosage.doseAndRate.dose[x]:doseRange", "path": "Dosage.doseAndRate.dose[x]", "sliceName": "doseRange", "definition": "Hier wird die Dosiermenge mittels eines definierten Mengenbereichs angegeben.", "min": 0, "max": "1", "type": [ { "code": "Range" } ], "mustSupport": true }, { "id": "Dosage.doseAndRate.dose[x]:doseRange.low", "path": "Dosage.doseAndRate.dose[x].low", "definition": "Hier wird die untere Grenze des definierten Mengenbereichs angegeben.", "mustSupport": true, "binding": { "strength": "preferred", "valueSet": "https://fhir.kbv.de/ValueSet/KBV_VS_SFHIR_BMP_DOSIEREINHEIT" } }, { "id": "Dosage.doseAndRate.dose[x]:doseRange.low.value", "path": "Dosage.doseAndRate.dose[x].low.value", "definition": "Hier wird die Menge des Arzneimittels angegeben, die verabreicht/eingenommen wird.", "min": 1, "mustSupport": true }, { "id": "Dosage.doseAndRate.dose[x]:doseRange.low.unit", "path": "Dosage.doseAndRate.dose[x].low.unit", "min": 1, "mustSupport": true }, { "id": "Dosage.doseAndRate.dose[x]:doseRange.low.system", "path": "Dosage.doseAndRate.dose[x].low.system", "min": 1, "mustSupport": true }, { "id": "Dosage.doseAndRate.dose[x]:doseRange.low.code", "path": "Dosage.doseAndRate.dose[x].low.code", "definition": "Hier wird die Dosiereinheit als Code angegeben. Hierbei sollte nach Möglichkeit folgendes ValueSet verwendet werden: https://fhir.kbv.de/ValueSet/KBV_VS_SFHIR_BMP_DOSIEREINHEIT.", "min": 1, "mustSupport": true }, { "id": "Dosage.doseAndRate.dose[x]:doseRange.high", "path": "Dosage.doseAndRate.dose[x].high", "definition": "Hier wird die obere Grenze des definierten Mengenbereichs angegeben.", "mustSupport": true, "binding": { "strength": "preferred", "valueSet": "https://fhir.kbv.de/ValueSet/KBV_VS_SFHIR_BMP_DOSIEREINHEIT" } }, { "id": "Dosage.doseAndRate.dose[x]:doseRange.high.value", "path": "Dosage.doseAndRate.dose[x].high.value", "definition": "Hier wird die Menge des Arzneimittels angegeben, die verabreicht/eingenommen wird.", "min": 1, "mustSupport": true }, { "id": "Dosage.doseAndRate.dose[x]:doseRange.high.unit", "path": "Dosage.doseAndRate.dose[x].high.unit", "min": 1, "mustSupport": true }, { "id": "Dosage.doseAndRate.dose[x]:doseRange.high.system", "path": "Dosage.doseAndRate.dose[x].high.system", "min": 1, "mustSupport": true }, { "id": "Dosage.doseAndRate.dose[x]:doseRange.high.code", "path": "Dosage.doseAndRate.dose[x].high.code", "definition": "Hier wird die Dosiereinheit als Code angegeben. Hierbei sollte nach Möglichkeit folgendes ValueSet verwendet werden: https://fhir.kbv.de/ValueSet/KBV_VS_SFHIR_BMP_DOSIEREINHEIT.", "min": 1, "mustSupport": true }, { "id": "Dosage.doseAndRate.rate[x]", "path": "Dosage.doseAndRate.rate[x]", "slicing": { "discriminator": [ { "type": "type", "path": "$this" } ], "ordered": false, "rules": "open" }, "definition": "Hier kann die Dosierung einer Rate über einen bestimmten Zeitraum abgebildet werden. Ein Beispiel dafür wäre die Rate einer Infusionslösung. Dabei kann entweder eine konkrete Verabreichungsgeschwindigkeit (z.B. eine Infusionslösung, welche mit 50 ml/h oder 100 mg/h verabreicht wird) oder ein Bereich für eine Verabreichungsgeschwindigkeit definiert werden (z.B. die Gabe einer Infusionslösung, welche mit 100 ml/h bis 150 mg/h verabreicht wird).", "mustSupport": true }, { "id": "Dosage.doseAndRate.rate[x]:rateRange", "path": "Dosage.doseAndRate.rate[x]", "sliceName": "rateRange", "definition": "Hier kann der Bereich für eine Rate/Verabreichungsgeschwindigkeit angegeben werden, mit welcher ein Arzneimittel verabreicht wird.\n\n**Beispiel:**\n* Eine Infusionslösung kann mit einer Geschwindigkeit von 100 ml/h (Untergrenze) bis 120 ml/h (Obergrenze) verabreicht werden.", "min": 0, "max": "1", "type": [ { "code": "Range" } ], "mustSupport": true }, { "id": "Dosage.doseAndRate.rate[x]:rateRange.low", "path": "Dosage.doseAndRate.rate[x].low", "definition": "Hier wird die untere Grenze des definierten Mengenbereichs angegeben.", "mustSupport": true }, { "id": "Dosage.doseAndRate.rate[x]:rateRange.low.value", "path": "Dosage.doseAndRate.rate[x].low.value", "definition": "Hier wird die Menge angegeben, die über einen bestimmten Zeitraum verabreicht wird.", "min": 1, "mustSupport": true }, { "id": "Dosage.doseAndRate.rate[x]:rateRange.low.unit", "path": "Dosage.doseAndRate.rate[x].low.unit", "min": 1, "mustSupport": true }, { "id": "Dosage.doseAndRate.rate[x]:rateRange.low.system", "path": "Dosage.doseAndRate.rate[x].low.system", "min": 1, "mustSupport": true }, { "id": "Dosage.doseAndRate.rate[x]:rateRange.low.code", "path": "Dosage.doseAndRate.rate[x].low.code", "definition": "Hier wird die Einheit der Rate/Verabreichungsgeschwingigkeit als Code angegeben.", "min": 1, "mustSupport": true }, { "id": "Dosage.doseAndRate.rate[x]:rateRange.high", "path": "Dosage.doseAndRate.rate[x].high", "definition": "Hier wird die obere Grenze des definierten Mengenbereichs angegeben.", "mustSupport": true }, { "id": "Dosage.doseAndRate.rate[x]:rateRange.high.value", "path": "Dosage.doseAndRate.rate[x].high.value", "definition": "Hier wird die Menge angegeben, die über einen bestimmten Zeitraum verabreicht wird.", "min": 1, "mustSupport": true }, { "id": "Dosage.doseAndRate.rate[x]:rateRange.high.unit", "path": "Dosage.doseAndRate.rate[x].high.unit", "min": 1, "mustSupport": true }, { "id": "Dosage.doseAndRate.rate[x]:rateRange.high.system", "path": "Dosage.doseAndRate.rate[x].high.system", "min": 1, "mustSupport": true }, { "id": "Dosage.doseAndRate.rate[x]:rateRange.high.code", "path": "Dosage.doseAndRate.rate[x].high.code", "definition": "Hier wird die Einheit der Rate/Verabreichungsgeschwingigkeit als Code angegeben.", "min": 1, "mustSupport": true }, { "id": "Dosage.doseAndRate.rate[x]:rateQuantity", "path": "Dosage.doseAndRate.rate[x]", "sliceName": "rateQuantity", "definition": "Hier wird die Rate/Verabreichungsgeschwindigkeit in Form einer festen Angabe abgebildet. Dabei wird die Geschwindigkeit bzw. Flussrate, mit der das Arzneimittel verabreicht wird, mit Hilfe einer kombinierten Einheit abgebildet (z.B. ml/h).\n\n**Beispiele für eine Flussrate mit einer kombinierten Einheit:**\n* 1 Milliliter pro Stunde (1 ml/h)\n* 1 Milligramm pro Stunde (1 mg/h)", "min": 0, "max": "1", "type": [ { "code": "Quantity", "profile": [ "http://hl7.org/fhir/StructureDefinition/SimpleQuantity" ] } ], "mustSupport": true }, { "id": "Dosage.doseAndRate.rate[x]:rateQuantity.value", "path": "Dosage.doseAndRate.rate[x].value", "definition": "Hier wird die Menge angegeben, die über einen bestimmten Zeitraum verabreicht wird.", "min": 1, "mustSupport": true }, { "id": "Dosage.doseAndRate.rate[x]:rateQuantity.unit", "path": "Dosage.doseAndRate.rate[x].unit", "definition": "Hier wird die Einheit der Rate/Verabreichungsgeschwingigkeit in menschenlesbarer Sprache angegeben.", "min": 1, "mustSupport": true }, { "id": "Dosage.doseAndRate.rate[x]:rateQuantity.system", "path": "Dosage.doseAndRate.rate[x].system", "min": 1, "mustSupport": true }, { "id": "Dosage.doseAndRate.rate[x]:rateQuantity.code", "path": "Dosage.doseAndRate.rate[x].code", "definition": "Hier wird die Einheit der Rate/Verabreichungsgeschwingigkeit als Code angegeben.", "min": 1, "mustSupport": true }, { "id": "Dosage.doseAndRate.rate[x]:rateRatio", "path": "Dosage.doseAndRate.rate[x]", "sliceName": "rateRatio", "definition": "Hier wird die Rate/Verabreichungsgeschwindigkeit in Form einer festen Angabe abgebildet. Dabei wird die Geschwindigkeit bzw. Flussrate, mit der das Arzneimittel verabreicht wird, mit Hilfe einer Einheit abgebildet, in der Zähler (z.B. 1 ml) und Nenner (z.B. 1 h) einzeln abgebildet werden.\n\n**Beispiele für eine Flussrate mit Angabe von Zähler und Nenner:**\n* 1 Mililiter pro 1 Stunde (1ml / 1h)\n* 1 Milligramm pro 1 Stunde (1mg / 1h)", "min": 0, "max": "1", "type": [ { "code": "Ratio" } ], "mustSupport": true }, { "id": "Dosage.doseAndRate.rate[x]:rateRatio.numerator", "path": "Dosage.doseAndRate.rate[x].numerator", "definition": "Hier wird der Zähler einer Verabreichungsgeschwindigkeit bzw. Flussrate angegeben. Dieser besteht aus einem Wert und einer Einheit (bevorzugt eine Volumeneinheit oder eine Gewichtseinheit).\n\n**Beispiele für den Zähler einer Verabreichungsgeschwindigkeit:**\n* 10 Milliliter (10 ml)\n* 5 Milligramm (5 mg)", "min": 1, "mustSupport": true, "binding": { "strength": "preferred", "valueSet": "https://fhir.kbv.de/ValueSet/KBV_VS_SFHIR_BMP_DOSIEREINHEIT" } }, { "id": "Dosage.doseAndRate.rate[x]:rateRatio.numerator.value", "path": "Dosage.doseAndRate.rate[x].numerator.value", "definition": "Hier wird die Menge angegeben, die über einen bestimmten Zeitraum verabreicht wird.", "min": 1, "mustSupport": true }, { "id": "Dosage.doseAndRate.rate[x]:rateRatio.numerator.unit", "path": "Dosage.doseAndRate.rate[x].numerator.unit", "min": 1, "mustSupport": true }, { "id": "Dosage.doseAndRate.rate[x]:rateRatio.numerator.system", "path": "Dosage.doseAndRate.rate[x].numerator.system", "min": 1, "mustSupport": true }, { "id": "Dosage.doseAndRate.rate[x]:rateRatio.numerator.code", "path": "Dosage.doseAndRate.rate[x].numerator.code", "definition": "Hier wird die Dosiereinheit als Code angegeben. Hierbei sollte nach Möglichkeit folgendes ValueSet verwendet werden: https://fhir.kbv.de/ValueSet/KBV_VS_SFHIR_BMP_DOSIEREINHEIT.", "min": 1, "mustSupport": true }, { "id": "Dosage.doseAndRate.rate[x]:rateRatio.denominator", "path": "Dosage.doseAndRate.rate[x].denominator", "definition": "Hier wird der Nenner einer Verabreichungsgeschwindigkeit bzw. Flussrate angegeben. Dieser entspricht einer Zeitspanne.\n\n**Beispiele für den Nenner einer Verabreichungsgeschwindigkeit:**\n* 3 Stunden (3h)\n* 1 Tag (1d)", "min": 1, "mustSupport": true, "binding": { "strength": "required", "valueSet": "http://hl7.org/fhir/ValueSet/units-of-time" } }, { "id": "Dosage.doseAndRate.rate[x]:rateRatio.denominator.value", "path": "Dosage.doseAndRate.rate[x].denominator.value", "definition": "Hier wird die Menge angegeben, die über einen bestimmten Zeitraum verabreicht wird.", "min": 1, "mustSupport": true }, { "id": "Dosage.doseAndRate.rate[x]:rateRatio.denominator.unit", "path": "Dosage.doseAndRate.rate[x].denominator.unit", "min": 1, "mustSupport": true }, { "id": "Dosage.doseAndRate.rate[x]:rateRatio.denominator.system", "path": "Dosage.doseAndRate.rate[x].denominator.system", "min": 1, "mustSupport": true }, { "id": "Dosage.doseAndRate.rate[x]:rateRatio.denominator.code", "path": "Dosage.doseAndRate.rate[x].denominator.code", "definition": "Hier wird die Dosiereinheit als Code angegeben. Hierbei sollte nach Möglichkeit folgendes ValueSet verwendet werden: https://fhir.kbv.de/ValueSet/KBV_VS_SFHIR_BMP_DOSIEREINHEIT.", "min": 1, "mustSupport": true }, { "id": "Dosage.maxDosePerPeriod", "path": "Dosage.maxDosePerPeriod", "definition": "Hier wird die maximale Dosis angegeben, die in einer bestimmten Zeitspanne verabreicht werden darf. Bei kombinierten Dauer- und Bedarfsmedikationen (\"zusätzlich bei Bedarf\") wird über dieses Element die maximale Gesamtdosis der Einnahme/Verabreichung von Arzneimitteln mit gleichem Wirkstoff oder aus der gleichen Wirkstoffgruppe abgebildet.", "mustSupport": true }, { "id": "Dosage.maxDosePerPeriod.numerator", "path": "Dosage.maxDosePerPeriod.numerator", "definition": "Hier wird die Menge abgebildet. Dieser Wert entspricht dem Wert im Zähler der Angabe \"Maximale Menge pro Gabe\".", "min": 1, "mustSupport": true, "binding": { "strength": "preferred", "valueSet": "https://fhir.kbv.de/ValueSet/KBV_VS_SFHIR_BMP_DOSIEREINHEIT" } }, { "id": "Dosage.maxDosePerPeriod.numerator.value", "path": "Dosage.maxDosePerPeriod.numerator.value", "definition": "Hier wird die Menge des Arzneimittels angegeben, die maximal innerhalb der Zeitspanne verabreicht/eingenommen werden darf.", "min": 1, "mustSupport": true }, { "id": "Dosage.maxDosePerPeriod.numerator.unit", "path": "Dosage.maxDosePerPeriod.numerator.unit", "min": 1, "mustSupport": true }, { "id": "Dosage.maxDosePerPeriod.numerator.system", "path": "Dosage.maxDosePerPeriod.numerator.system", "min": 1, "mustSupport": true }, { "id": "Dosage.maxDosePerPeriod.numerator.code", "path": "Dosage.maxDosePerPeriod.numerator.code", "definition": "Hier wird die Dosiereinheit als Code angegeben. Hierbei sollte nach Möglichkeit folgendes ValueSet verwendet werden: https://fhir.kbv.de/ValueSet/KBV_VS_SFHIR_BMP_DOSIEREINHEIT.", "min": 1, "mustSupport": true }, { "id": "Dosage.maxDosePerPeriod.denominator", "path": "Dosage.maxDosePerPeriod.denominator", "definition": "Hier wird die Zeitspanne angegeben. Dieser Wert entspricht dem Wert im Nenner der Angabe \"Maximale Menge pro Gabe\".", "min": 1, "mustSupport": true, "binding": { "strength": "required", "valueSet": "http://hl7.org/fhir/ValueSet/units-of-time" } }, { "id": "Dosage.maxDosePerPeriod.denominator.value", "path": "Dosage.maxDosePerPeriod.denominator.value", "definition": "Hier wird der Wert der Zeitspanne angegeben, innerhalb der die definierte Menge des Arzneimittels maximal verabreicht/eingenommen werden darf.", "min": 1, "mustSupport": true }, { "id": "Dosage.maxDosePerPeriod.denominator.unit", "path": "Dosage.maxDosePerPeriod.denominator.unit", "min": 1, "mustSupport": true }, { "id": "Dosage.maxDosePerPeriod.denominator.system", "path": "Dosage.maxDosePerPeriod.denominator.system", "min": 1, "mustSupport": true }, { "id": "Dosage.maxDosePerPeriod.denominator.code", "path": "Dosage.maxDosePerPeriod.denominator.code", "definition": "Hier wird die Zeiteinheit als Code angegeben.", "min": 1, "mustSupport": true }, { "id": "Dosage.maxDosePerAdministration", "path": "Dosage.maxDosePerAdministration", "definition": "Hier wird die Dosiermenge mittels einer maximalen Menge angegeben.", "mustSupport": true, "binding": { "strength": "preferred", "valueSet": "https://fhir.kbv.de/ValueSet/KBV_VS_SFHIR_BMP_DOSIEREINHEIT" } }, { "id": "Dosage.maxDosePerAdministration.value", "path": "Dosage.maxDosePerAdministration.value", "definition": "Hier wird die Menge des Arzneimittels angegeben, die verabreicht/eingenommen wird.", "min": 1, "mustSupport": true }, { "id": "Dosage.maxDosePerAdministration.unit", "path": "Dosage.maxDosePerAdministration.unit", "min": 1, "mustSupport": true }, { "id": "Dosage.maxDosePerAdministration.system", "path": "Dosage.maxDosePerAdministration.system", "min": 1, "mustSupport": true }, { "id": "Dosage.maxDosePerAdministration.code", "path": "Dosage.maxDosePerAdministration.code", "definition": "Hier wird die Dosiereinheit als Code angegeben. Hierbei sollte nach Möglichkeit folgendes ValueSet verwendet werden: https://fhir.kbv.de/ValueSet/KBV_VS_SFHIR_BMP_DOSIEREINHEIT.", "min": 1, "mustSupport": true } ] } }