Einwilligungsmanagement

Patient (bzw. Personenbezug)

Um den Bezug zwischen Person und Einwilligung herzustellen, wird die Einwilligung mit mindestens einem eindeutigen Personenidentifikator versehen. Dies kann je nach Anforderungen die Fallnummer, ein Patienten-Identifikator, die Angabe eines Bevollmächtigten oder ein Studienpseudonym, o.ä. sein.

Im Forschungskontext enthält die Einwilligung typischerweise keine personenbezogenen Informationen, wie Adresse oder Geburtstag der betroffenen Person (Teilnehmer, Patient, Behandlungsfall, …).

Zweck des Profils Patient ist es, den Bezug von Patient und Einwilligung durch mindestens einen Identifikator bestehend aus ContextIdentifierType und ContextIdentifier (System+Value) herzustellen.

ConsentManagementPatient (Patient)	I		Patient	There are no (further) constraints on this element Element id Patient Short description Information about an individual or animal receiving health care services Alternate names SubjectOfCare Client Resident Definition Demographics and other administrative information about an individual or animal receiving care or other health-related services. Data type Patient Constraints dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources `contained.contained.empty()` dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource `contained.where((('#'+id in (%resource.descendants().reference \| %resource.descendants().as(canonical) \| %resource.descendants().as(uri) \| %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty()` dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated `contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()` dom-5: If a resource is contained in another resource, it SHALL NOT have a security label `contained.meta.security.empty()` dom-6: A resource should have narrative for robust management text.`div`.exists() Mappings rim: Entity. Role, or Act rim: Patient[classCode=PAT] cda: ClinicalDocument.recordTarget.patientRole
id	Σ	0..1	string	There are no (further) constraints on this element Element id Patient.id Short description Logical id of this artifact Definition The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes. Comments The only time that a resource does not have an id is when it is being submitted to the server using a create operation. Data type string
meta	Σ	0..1	Meta	There are no (further) constraints on this element Element id Patient.meta Short description Metadata about the resource Definition The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource. Data type Meta Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
implicitRules	Σ ?!	0..1	uri	There are no (further) constraints on this element Element id Patient.implicitRules Short description A set of rules under which this content was created Definition A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc. Comments Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
language		0..1	codeBinding	There are no (further) constraints on this element Element id Patient.language Short description Language of the resource content Definition The base language in which the resource is written. Comments Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute). Data type code Binding A human language. CommonLanguages (preferred) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
text		0..1	Narrative	There are no (further) constraints on this element Element id Patient.text Short description Text summary of the resource, for human interpretation Alternate names narrative, html, xhtml, display Definition A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety. Comments Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later. Data type Narrative Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: Act.text?
contained		0..*	Resource	There are no (further) constraints on this element Element id Patient.contained Short description Contained, inline Resources Alternate names inline resources, anonymous resources, contained resources Definition These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope. Comments This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels. Data type Resource Mappings rim: N/A
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Patient.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: N/A
modifierExtension	?! I	0..*	Extension	There are no (further) constraints on this element Element id Patient.modifierExtension Short description Extensions that cannot be ignored Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: N/A
identifier	S Σ	1..*	Identifier	There are no (further) constraints on this element Element id Patient.identifier Short description An identifier for this patient Definition An identifier for this patient. Requirements Patients are almost always assigned specific numerical identifiers. Data type Identifier Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings w5: FiveWs.identifier v2: PID-3 rim: id cda: .id
id		0..1	string	There are no (further) constraints on this element Element id Patient.identifier.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Patient.identifier.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a
use	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element id Patient.identifier.use Short description usual \| official \| temp \| secondary \| old (If known) Definition The purpose of this identifier. Requirements Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. Comments Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. Data type code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: N/A rim: Role.code or implied by context
type	S Σ	1..1	CodeableConceptBinding	Element id Patient.identifier.type Short description Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. Requirements Allows users to make use of identifiers when the identifier system is not known. Comments This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. Data type CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. ConsentManagementContextIdentifierType (extensible) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: CX.5 rim: Role.code or implied by context
id		0..1	string	There are no (further) constraints on this element Element id Patient.identifier.type.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Patient.identifier.type.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a
coding	S Σ	1..*	Coding	There are no (further) constraints on this element Element id Patient.identifier.type.coding Short description Code defined by a terminology system Definition A reference to a code defined by a terminology system. Requirements Allows for alternative encodings within a code system, and translations to other code systems. Comments Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. Data type Coding Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: CE.1-8, CE.10-22 rim: union(., ./translation) orim: fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
id		0..1	string	There are no (further) constraints on this element Element id Patient.identifier.type.coding.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Patient.identifier.type.coding.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a
system	S Σ	1..1	uri	There are no (further) constraints on this element Element id Patient.identifier.type.coding.system Short description Identity of the terminology system Definition The identification of the code system that defines the meaning of the symbol in the code. Requirements Need to be unambiguous about the source of the definition of the symbol. Comments The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: CE.3 rim:* ./codeSystem orim: fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem
version	Σ	0..1	string	There are no (further) constraints on this element Element id Patient.identifier.type.coding.version Short description Version of the system - if relevant Definition The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged. Comments Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: CE.7 rim:* ./codeSystemVersion orim: fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion
code	S Σ	1..1	code	There are no (further) constraints on this element Element id Patient.identifier.type.coding.code Short description Symbol in syntax defined by the system Definition A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination). Requirements Need to refer to a particular code in the system. Data type code Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: CE.1 rim:* ./code orim: fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code
display	Σ	0..1	string	There are no (further) constraints on this element Element id Patient.identifier.type.coding.display Short description Representation defined by the system Definition A representation of the meaning of the code in the system, following the rules of the system. Requirements Need to be able to carry a human-readable meaning of the code for readers that do not know the system. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: CE.2 - but note this is not well followed rim:* CV.displayName orim: fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName
userSelected	Σ	0..1	boolean	There are no (further) constraints on this element Element id Patient.identifier.type.coding.userSelected Short description If this coding was chosen directly by the user Definition Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays). Requirements This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing. Comments Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely. Data type boolean Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: Sometimes implied by being first rim: CD.codingRationale orim: fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]
text	Σ	0..1	string	There are no (further) constraints on this element Element id Patient.identifier.type.text Short description Plain text representation of the concept Definition A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user. Requirements The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source. Comments Very often the text is the same as a displayName of one of the codings. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: CE.9. But note many systems use CE.2 for this rim: ./originalText[mediaType/code="text/plain"]/data orim: fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText
system	S Σ	1..1	uri	There are no (further) constraints on this element Element id Patient.identifier.system Short description The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique. Requirements There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. Comments Identifier.system is always case sensitive. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General http://www.acme.com/identifiers/patient Mappings v2: CX.4 / EI-2-4 rim: II.root or Role.id.root servd: ./IdentifierType
value	S Σ	1..1	string	There are no (further) constraints on this element Element id Patient.identifier.value Short description The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system. Comments If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General 123456 Mappings v2: CX.1 / EI.1 rim: II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd: ./Value
period	Σ	0..1	Period	There are no (further) constraints on this element Element id Patient.identifier.period Short description Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use. Data type Period Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: CX.7 + CX.8 rim: Role.effectiveTime or implied by context servd: ./StartDate and ./EndDate
assigner	Σ	0..1	Reference(Organization)	There are no (further) constraints on this element Element id Patient.identifier.assigner Short description Organization that issued id (may be just text) Definition Organization that issued/manages the identifier. Comments The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. Data type Reference(Organization) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: CX.4 / (CX.4,CX.9,CX.10) rim: II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd: ./IdentifierIssuingAuthority
active	Σ ?!	0..1	boolean	There are no (further) constraints on this element Element id Patient.active Short description Whether this patient's record is in active use Definition Whether this patient record is in active use. Many systems use this property to mark as non-current patients, such as those that have not been seen for a period of time based on an organization's business rules. It is often used to filter patient lists to exclude inactive patients Deceased patients may also be marked as inactive for the same reasons, but may be active for some time after death. Requirements Need to be able to mark a patient record as not to be used because it was created in error. Comments If a record is inactive, and linked to an active record, then future patient/record updates should occur on the other patient. Meaning when missing This resource is generally assumed to be active if no value is provided for the active element Data type boolean Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings w5: FiveWs.status rim: statusCode cda: n/a
name	Σ	0..*	HumanName	There are no (further) constraints on this element Element id Patient.name Short description A name associated with the patient Definition A name associated with the individual. Requirements Need to be able to track the patient by multiple names. Examples are your official name and a partner name. Comments A patient may have multiple names with different uses or applicable periods. For animals, the name is a "HumanName" in the sense that is assigned and used by humans and has the same patterns. Data type HumanName Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: PID-5, PID-9 rim: name cda: .patient.name
telecom	Σ	0..*	ContactPoint	There are no (further) constraints on this element Element id Patient.telecom Short description A contact detail for the individual Definition A contact detail (e.g. a telephone number or an email address) by which the individual may be contacted. Requirements People have (primary) ways to contact them in some way such as phone, email. Comments A Patient may have multiple ways to be contacted with different uses or applicable periods. May need to have options for contacting the person urgently and also to help with identification. The address might not go directly to the individual, but may reach another party that is able to proxy for the patient (i.e. home phone, or pet owner's phone). Data type ContactPoint Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: PID-13, PID-14, PID-40 rim: telecom cda: .telecom
gender	Σ	0..1	codeBinding	There are no (further) constraints on this element Element id Patient.gender Short description male \| female \| other \| unknown Definition Administrative Gender - the gender that the patient is considered to have for administration and record keeping purposes. Requirements Needed for identification of the individual, in combination with (at least) name and birth date. Comments The gender might not match the biological sex as determined by genetics or the individual's preferred identification. Note that for both humans and particularly animals, there are other legitimate possibilities than male and female, though the vast majority of systems and contexts only support male and female. Systems providing decision support or enforcing business rules should ideally do this on the basis of Observations dealing with the specific sex or gender aspect of interest (anatomical, chromosomal, social, etc.) However, because these observations are infrequently recorded, defaulting to the administrative gender is common practice. Where such defaulting occurs, rule enforcement should allow for the variation between administrative and biological, chromosomal and other gender aspects. For example, an alert about a hysterectomy on a male should be handled as a warning or overridable error, not a "hard" error. See the Patient Gender and Sex section for additional information about communicating patient gender and sex. Data type code Binding The gender of a person used for administrative purposes. AdministrativeGender (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: PID-8 rim: player[classCode=PSN\|ANM and determinerCode=INSTANCE]/administrativeGender cda: .patient.administrativeGenderCode
birthDate	Σ	0..1	date	There are no (further) constraints on this element Element id Patient.birthDate Short description The date of birth for the individual Definition The date of birth for the individual. Requirements Age of the individual drives many clinical processes. Comments At least an estimated year should be provided as a guess if the real DOB is unknown There is a standard extension "patient-birthTime" available that should be used where Time is required (such as in maternity/infant care systems). Data type date Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: PID-7 rim: player[classCode=PSN\|ANM and determinerCode=INSTANCE]/birthTime cda: .patient.birthTime loinc: 21112-8
deceased[x]	Σ ?!	0..1		There are no (further) constraints on this element Element id Patient.deceased[x] Short description Indicates if the individual is deceased or not Definition Indicates if the individual is deceased or not. Requirements The fact that a patient is deceased influences the clinical process. Also, in human communication and relation management it is necessary to know whether the person is alive. Comments If there's no value in the instance, it means there is no statement on whether or not the individual is deceased. Most systems will interpret the absence of a value as a sign of the person being alive. Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: PID-30 (bool) and PID-29 (datetime) rim: player[classCode=PSN\|ANM and determinerCode=INSTANCE]/deceasedInd, player[classCode=PSN\|ANM and determinerCode=INSTANCE]/deceasedTime cda: n/a
deceasedBoolean			boolean	There are no (further) constraints on this element Data type boolean
deceasedDateTime			dateTime	There are no (further) constraints on this element Data type dateTime
address	Σ	0..*	Address	There are no (further) constraints on this element Element id Patient.address Short description An address for the individual Definition An address for the individual. Requirements May need to keep track of patient addresses for contacting, billing or reporting requirements and also to help with identification. Comments Patient may have multiple addresses with different uses or applicable periods. Data type Address Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: PID-11 rim: addr cda: .addr
maritalStatus		0..1	CodeableConceptBinding	There are no (further) constraints on this element Element id Patient.maritalStatus Short description Marital (civil) status of a patient Definition This field contains a patient's most recent marital (civil) status. Requirements Most, if not all systems capture it. Data type CodeableConcept Binding The domestic partnership status of a person. Marital Status Codes (extensible) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: PID-16 rim: player[classCode=PSN]/maritalStatusCode cda: .patient.maritalStatusCode
multipleBirth[x]		0..1		There are no (further) constraints on this element Element id Patient.multipleBirth[x] Short description Whether patient is part of a multiple birth Definition Indicates whether the patient is part of a multiple (boolean) or indicates the actual birth order (integer). Requirements For disambiguation of multiple-birth children, especially relevant where the care provider doesn't meet the patient, such as labs. Comments Where the valueInteger is provided, the number is the birth number in the sequence. E.g. The middle birth in triplets would be valueInteger=2 and the third born would have valueInteger=3 If a boolean value was provided for this triplets example, then all 3 patient records would have valueBoolean=true (the ordering is not indicated). Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: PID-24 (bool), PID-25 (integer) rim: player[classCode=PSN\|ANM and determinerCode=INSTANCE]/multipleBirthInd, player[classCode=PSN\|ANM and determinerCode=INSTANCE]/multipleBirthOrderNumber cda: n/a
multipleBirthBoolean			boolean	There are no (further) constraints on this element Data type boolean
multipleBirthInteger			integer	There are no (further) constraints on this element Data type integer
photo		0..*	Attachment	There are no (further) constraints on this element Element id Patient.photo Short description Image of the patient Definition Image of the patient. Requirements Many EHR systems have the capability to capture an image of the patient. Fits with newer social media usage too. Comments Guidelines: Use id photos, not clinical photos. Limit dimensions to thumbnail. Keep byte count low to ease resource updates. Data type Attachment Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: OBX-5 - needs a profile rim: player[classCode=PSN\|ANM and determinerCode=INSTANCE]/desc cda: n/a
contact	I	0..*	BackboneElement	There are no (further) constraints on this element Element id Patient.contact Short description A contact party (e.g. guardian, partner, friend) for the patient Definition A contact party (e.g. guardian, partner, friend) for the patient. Requirements Need to track people you can contact about the patient. Comments Contact covers all kinds of contact parties: family members, business contacts, guardians, caregivers. Not applicable to register pedigree and family ties beyond use of having contact. Data type BackboneElement Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` pat-1: SHALL at least contain a contact's details or a reference to an organization `name.exists() or telecom.exists() or address.exists() or organization.exists()` Mappings rim: player[classCode=PSN\|ANM and determinerCode=INSTANCE]/scopedRole[classCode=CON] cda: n/a
id		0..1	string	There are no (further) constraints on this element Element id Patient.contact.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Patient.contact.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id Patient.contact.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: N/A
relationship		0..*	CodeableConceptBinding	There are no (further) constraints on this element Element id Patient.contact.relationship Short description The kind of relationship Definition The nature of the relationship between the patient and the contact person. Requirements Used to determine which contact person is the most relevant to approach, depending on circumstances. Data type CodeableConcept Binding The nature of the relationship between a patient and a contact person for that patient. PatientContactRelationship (extensible) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: NK1-7, NK1-3 rim: code cda: n/a
name		0..1	HumanName	There are no (further) constraints on this element Element id Patient.contact.name Short description A name associated with the contact person Definition A name associated with the contact person. Requirements Contact persons need to be identified by name, but it is uncommon to need details about multiple other names for that contact person. Data type HumanName Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: NK1-2 rim: name cda: n/a
telecom		0..*	ContactPoint	There are no (further) constraints on this element Element id Patient.contact.telecom Short description A contact detail for the person Definition A contact detail for the person, e.g. a telephone number or an email address. Requirements People have (primary) ways to contact them in some way such as phone, email. Comments Contact may have multiple ways to be contacted with different uses or applicable periods. May need to have options for contacting the person urgently, and also to help with identification. Data type ContactPoint Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: NK1-5, NK1-6, NK1-40 rim: telecom cda: n/a
address		0..1	Address	There are no (further) constraints on this element Element id Patient.contact.address Short description Address for the contact person Definition Address for the contact person. Requirements Need to keep track where the contact person can be contacted per postal mail or visited. Data type Address Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: NK1-4 rim: addr cda: n/a
gender		0..1	codeBinding	There are no (further) constraints on this element Element id Patient.contact.gender Short description male \| female \| other \| unknown Definition Administrative Gender - the gender that the contact person is considered to have for administration and record keeping purposes. Requirements Needed to address the person correctly. Data type code Binding The gender of a person used for administrative purposes. AdministrativeGender (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: NK1-15 rim: player[classCode=PSN\|ANM and determinerCode=INSTANCE]/administrativeGender cda: n/a
organization	I	0..1	Reference(Organization)	There are no (further) constraints on this element Element id Patient.contact.organization Short description Organization that is associated with the contact Definition Organization on behalf of which the contact is acting or for which the contact is working. Requirements For guardians or business related contacts, the organization is relevant. Data type Reference(Organization) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: NK1-13, NK1-30, NK1-31, NK1-32, NK1-41 rim: scoper cda: n/a
period		0..1	Period	There are no (further) constraints on this element Element id Patient.contact.period Short description The period during which this contact person or organization is valid to be contacted relating to this patient Definition The period during which this contact person or organization is valid to be contacted relating to this patient. Data type Period Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: effectiveTime cda: n/a
communication		0..*	BackboneElement	There are no (further) constraints on this element Element id Patient.communication Short description A language which may be used to communicate with the patient about his or her health Definition A language which may be used to communicate with the patient about his or her health. Requirements If a patient does not speak the local language, interpreters may be required, so languages spoken and proficiency are important things to keep track of both for patient and other persons of interest. Comments If no language is specified, this implies that the default local language is spoken. If you need to convey proficiency for multiple modes, then you need multiple Patient.Communication associations. For animals, language is not a relevant field, and should be absent from the instance. If the Patient does not speak the default local language, then the Interpreter Required Standard can be used to explicitly declare that an interpreter is required. Data type BackboneElement Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: LanguageCommunication cda: patient.languageCommunication
id		0..1	string	There are no (further) constraints on this element Element id Patient.communication.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Patient.communication.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id Patient.communication.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: N/A
language		1..1	CodeableConceptBinding	There are no (further) constraints on this element Element id Patient.communication.language Short description The language which can be used to communicate with the patient about his or her health Definition The ISO-639-1 alpha 2 code in lower case for the language, optionally followed by a hyphen and the ISO-3166-1 alpha 2 code for the region in upper case; e.g. "en" for English, or "en-US" for American English versus "en-EN" for England English. Requirements Most systems in multilingual countries will want to convey language. Not all systems actually need the regional dialect. Comments The structure aa-BB with this exact casing is one the most widely used notations for locale. However not all systems actually code this but instead have it as free text. Hence CodeableConcept instead of code as the data type. Data type CodeableConcept Binding A human language. CommonLanguages (preferred) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: PID-15, LAN-2 rim: player[classCode=PSN\|ANM and determinerCode=INSTANCE]/languageCommunication/code cda: .languageCode
preferred		0..1	boolean	There are no (further) constraints on this element Element id Patient.communication.preferred Short description Language preference indicator Definition Indicates whether or not the patient prefers this language (over other languages he masters up a certain level). Requirements People that master multiple languages up to certain level may prefer one or more, i.e. feel more confident in communicating in a particular language making other languages sort of a fall back method. Comments This language is specifically identified for communicating healthcare information. Data type boolean Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: PID-15 rim: preferenceInd cda: .preferenceInd
generalPractitioner		0..*	Reference(Organization \| Practitioner \| PractitionerRole)	There are no (further) constraints on this element Element id Patient.generalPractitioner Short description Patient's nominated primary care provider Alternate names careProvider Definition Patient's nominated care provider. Comments This may be the primary care provider (in a GP context), or it may be a patient nominated care manager in a community/disability setting, or even organization that will provide people to perform the care provider roles. It is not to be used to record Care Teams, these should be in a CareTeam resource that may be linked to the CarePlan or EpisodeOfCare resources. Multiple GPs may be recorded against the patient for various reasons, such as a student that has his home GP listed along with the GP at university during the school semesters, or a "fly-in/fly-out" worker that has the onsite GP also included with his home GP to remain aware of medical issues. Jurisdictions may decide that they can profile this down to 1 if desired, or 1 per type. Data type Reference(Organization \| Practitioner \| PractitionerRole) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: PD1-4 rim: subjectOf.CareEvent.performer.AssignedEntity cda: n/a
managingOrganization	Σ	0..1	Reference(Organization)	There are no (further) constraints on this element Element id Patient.managingOrganization Short description Organization that is the custodian of the patient record Definition Organization that is the custodian of the patient record. Requirements Need to know who recognizes this patient record, manages and updates it. Comments There is only one managing organization for a specific patient record. Other organizations will have their own Patient record, and may use the Link property to join the records together (or a Person resource which can include confidence ratings for the association). Data type Reference(Organization) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: scoper cda: .providerOrganization
link	Σ ?!	0..*	BackboneElement	There are no (further) constraints on this element Element id Patient.link Short description Link to another patient resource that concerns the same actual person Definition Link to another patient resource that concerns the same actual patient. Requirements There are multiple use cases: Duplicate patient records due to the clerical errors associated with the difficulties of identifying humans consistently, and Distribution of patient information across multiple servers. Comments There is no assumption that linked patient records have mutual links. Data type BackboneElement Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: outboundLink cda: n/a
id		0..1	string	There are no (further) constraints on this element Element id Patient.link.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Patient.link.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id Patient.link.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: N/A
other	Σ	1..1	Reference(Patient \| RelatedPerson)	There are no (further) constraints on this element Element id Patient.link.other Short description The other patient or related person resource that the link refers to Definition The other patient resource that the link refers to. Comments Referencing a RelatedPerson here removes the need to use a Person record to associate a Patient and RelatedPerson as the same individual. Data type Reference(Patient \| RelatedPerson) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: PID-3, MRG-1 rim: id cda: n/a
type	Σ	1..1	codeBinding	There are no (further) constraints on this element Element id Patient.link.type Short description replaced-by \| replaces \| refer \| seealso Definition The type of link between this patient resource and another patient resource. Data type code Binding The type of link between this patient resource and another patient resource. LinkType (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: typeCode cda: n/a

Beispiel

<Patient xmlns="http://hl7.org/fhir">
    <id value="a8e49578-e40f-4a65-bdaa-a579801b37f3" />
    <meta>
        <lastUpdated value="2020-12-11T09:08:07.5320994+00:00" />
        <profile value="http://fhir.de/ConsentManagement/StructureDefinition/Patient" />
    </meta>
    <!--  Dies sei ein Studien-Patient, d.h. pseudonymisiert. Lediglich die PSN ist bekannt  -->
    <identifier>
        <type>
            <coding>
                <system value="http://hl7.org/fhir/v2/0203" />
                <code value="ANON" />
            </coding>
        </type>
        <system value="https://ths-greifswald.de/gpas" />
        <value value="MII/jzhwb4p" />
    </identifier>
</Patient>