Profil: Praxis / medizinische Einrichtung (Organization)

Fachlicher Kontext

Dieses Profil bildet eine Praxis / medizinische Einrichtung im Kontext einer Terminbuchung ab. Das Organization-Profil ist notwendig, damit ein Terminslot, eine Terminbuchung oder ein Terminprofil im 116117 Terminservice einer konkreten Praxis / medizinischen Einrichtung zugeordnet werden kann. Diese Zuordnung wirkt sich auf die Leistungsmerkmale aus, die beim Anlegen eines Terminprofils ausgewählt werden können. Es können nur Leistungsmerkmale ausgewählt werden, die die in der Praxis / medizinischen Einrichtung tätigen Ärzte anbieten.

Für die Zuordnung, in welcher Praxis / medizinischen Einrichtung ein Termin stattfindet, ist die Betriebsstättennummer (BSNR) dieser Praxis / medizinischen Einrichtung ausreichend. Auch für die Authentifizierung genügt die BSNR.

Im System der vertragsärztlichen Versorgung gibt es Haupt- und Nebenbetriebsstätten. Sowohl die Haupt- als auch die Nebenbetriebsstätten haben eine eigene BSNR. Eine Praxis / medizinische Einrichtung bildet eine wirtschaftliche Einheit, bestehend aus einer Hauptbetriebsstätte und zwischen 0 und n Nebenbetriebsstätten. Jede Nebenbetriebsstätte wird genau einer Hauptbetriebsstätte zugeordnet.

Zu einer Konstellation von einer Hauptbetriebsstätte mit einer oder mehreren Nebenbetriebsstätten kann es bspw. in folgenden Konstellationen kommen:

Eine Praxis betreibt eine Zweigpraxis. (Hauptbetriebsstätte: Praxissitz; Nebenbetriebsstätte: Zweigpraxis)
Eine Praxis hat Belegbetten in einem Krankenhaus. (Hauptbetriebsstätte: Praxissitz; Nebenbetriebsstätte: Belegbetten im Krankenhaus)
Mehrere Praxen schließen sich zu einer überörtlichen Berufsausübungsgemeinschaft (BAG) zusammen. Die beteiligten Praxen werden formal zu einer Praxis zusammengeschlossen. (Einer der bisherigen Praxissitze wird zur Hauptbetriebsstätte, alle anderen zur Nebenbetriebsstätten.)

Die vorliegende Schnittstelle ist so konzipiert, dass aus einer Praxis / medizinischen Einrichtung die Daten der zugehörigen Haupt- und aller Nebenbetriesstätten abgerufen werden können. Welche Praxen / medizinischen Einrichtung Haupt- und welche Nebenbetriebsstätten sind, ist in den Stammdaten der KVen hinterlegt. Der 116117 Terminservice bekommt diese Daten regelmäßig über den Stammdatenimport.

Beispielhaft veranschaulicht, bedeutet dies für die vorliegende Schnittstelle Folgendes:

Es existiert ein Verbund aus drei Praxen: Praxis A ist die Hauptbetriebsstätte, Praxen B und C sind Nebenbetriebsstätten.
Wenn die Authentifizierung mittels SMC-B von einer der drei Praxen durchgeführt wird, bekommt der Nutzer Zugriff auf alle drei Praxen.
Wenn bspw. nur die Daten von Praxis B abgerufen werden sollen, muss das TVS bei der Kommunikation mit den Systemen des 116117 Terminservices immer die BSNR der Praxis B mitgeben.
Wird der optionale Wert BSNR nicht mitgegeben, werden alle Ressourcen der Praxen A, B und C zurückgegeben.

Somit wird durch das Übermitteln der BSNR sichergestellt, dass ein TVS nur jene Ressource anlegen, ändern oder löschen kann, die zur eigenen Praxis / medizinischen Einrichtung oder einer der Nebenbetriebsstätten gehört.

Name und Adresse einer Praxis / medizinischen Einrichtung sind für dieses Projekt nicht relevant, da keine Terminsuche über diese Schnittstelle abgebildet wird. Daher ist die BSNR aktuell das einzige Datum, was zu einer Praxis / medizinischen Einrichtung im Rahmen dieser Schnittstelle im 116117 Terminservice gespeichert und verarbeitet wird.

FHIR-Profil

Name	KBV_PR_116117_TERMINSERVICE_TVS_TERMINSYNCHRONISATION_Organization
Type	Organization
Base Definition	`https://fhir.kbv.de/StructureDefinition/KBV_PR_Base_Organization\|1.6.0` (Version: 1.6.0)
Canonical URL	`https://fhir.kbv.de/StructureDefinition/KBV_PR_116117_TERMINSERVICE_TVS_TERMINSYNCHRONISATION_Organization`

Beschreibung
Diese Ressource enthält Informationen zu einer Praxis/medizinischen Einrichtung.

KBV_PR_116117_TERMINSERVICE_TVS_TERMINSYNCHRONISATION_Organization (Organization)	I		KBV_PR_Base_Organization	Element id Organization Short description Praxis / medizinischen Einrichtung Definition Die Einrichtung beschreibt den Ort, an dem ein Kontakt zwischen dem Patienten und der leistungserbringenden Person stattfindet (z.B. eine Praxis). Data type KBV_PR_Base_Organization Constraints dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources `contained.contained.empty()` dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource `contained.where((('#'+id in (%resource.descendants().reference \| %resource.descendants().as(canonical) \| %resource.descendants().as(uri) \| %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty()` dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated `contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()` dom-5: If a resource is contained in another resource, it SHALL NOT have a security label `contained.meta.security.empty()` dom-6: A resource should have narrative for robust management text.`div`.exists() org-1: The organization SHALL at least have a name or an identifier, and possibly more than one `(identifier.count() + name.count()) > 0` Mappings rim: Entity. Role, or Act v2: (also see master files messages) rim: Organization(classCode=ORG, determinerCode=INST) servd: Organization
id	Σ	0..1	string	There are no (further) constraints on this element Element id Organization.id Short description Logical id of this artifact Definition The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes. Comments The only time that a resource does not have an id is when it is being submitted to the server using a create operation. Data type string
meta	Σ	1..1	Meta	There are no (further) constraints on this element Element id Organization.meta Short description Metadata about the resource Definition The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource. Data type Meta Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
id		0..1	string	There are no (further) constraints on this element Element id Organization.meta.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Organization.meta.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a
versionId	Σ	0..1	id	There are no (further) constraints on this element Element id Organization.meta.versionId Short description Version specific identifier Definition The version specific identifier, as it appears in the version portion of the URL. This value changes when the resource is created, updated, or deleted. Comments The server assigns this value, and ignores what the client specifies, except in the case that the server is imposing version integrity on updates/deletes. Data type id Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
lastUpdated	Σ	0..1	instant	There are no (further) constraints on this element Element id Organization.meta.lastUpdated Short description When the resource version last changed Definition When the resource last changed - e.g. when the version changed. Comments This value is always populated except when the resource is first being created. The server / resource manager sets this value; what a client provides is irrelevant. This is equivalent to the HTTP Last-Modified and SHOULD have the same value on a read interaction. Data type instant Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
source	Σ	0..1	uri	There are no (further) constraints on this element Element id Organization.meta.source Short description Identifies where the resource comes from Definition A uri that identifies the source system of the resource. This provides a minimal amount of Provenance information that can be used to track or differentiate the source of information in the resource. The source may identify another FHIR server, document, message, database, etc. Comments In the provenance resource, this corresponds to Provenance.entity.what[x]. The exact use of the source (and the implied Provenance.entity.role) is left to implementer discretion. Only one nominated source is allowed; for additional provenance details, a full Provenance resource should be used. This element can be used to indicate where the current master source of a resource that has a canonical URL if the resource is no longer hosted at the canonical URL. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
profile	Σ	1..*	canonical(StructureDefinition)	Element id Organization.meta.profile Short description Profiles this resource claims to conform to Definition A list of profiles (references to StructureDefinition resources) that this resource claims to conform to. The URL is a reference to StructureDefinition.url. Comments It is up to the server and/or other infrastructure of policy to determine whether/how these claims are verified and/or updated over time. The list of profile URLs is a set. Data type canonical(StructureDefinition) Sliced: Unordered, Open, by $this(Value) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
kvdigitalProfil	Σ	1..1	canonical(StructureDefinition)Pattern	Element id Organization.meta.profile:kvdigitalProfil Short description Profiles this resource claims to conform to Definition A list of profiles (references to StructureDefinition resources) that this resource claims to conform to. The URL is a reference to StructureDefinition.url. Comments It is up to the server and/or other infrastructure of policy to determine whether/how these claims are verified and/or updated over time. The list of profile URLs is a set. Data type canonical(StructureDefinition) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Pattern https://fhir.kbv.de/StructureDefinition/KBV_PR_116117_TERMINSERVICE_TVS_TERMINSYNCHRONISATION_Organization\|1.0.0
security	Σ	0..*	CodingBinding	There are no (further) constraints on this element Element id Organization.meta.security Short description Security Labels applied to this resource Definition Security labels applied to this resource. These tags connect specific resources to the overall security policy and infrastructure. Comments The security labels can be updated without changing the stated version of the resource. The list of security labels is a set. Uniqueness is based the system/code, and version and display are ignored. Data type Coding Binding Security Labels from the Healthcare Privacy and Security Classification System. All Security Labels (extensible) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
tag	Σ	0..*	Coding	There are no (further) constraints on this element Element id Organization.meta.tag Short description Tags applied to this resource Definition Tags applied to this resource. Tags are intended to be used to identify and relate resources to process and workflow, and applications are not required to consider the tags when interpreting the meaning of a resource. Comments The tags can be updated without changing the stated version of the resource. The list of tags is a set. Uniqueness is based the system/code, and version and display are ignored. Data type Coding Binding Codes that represent various types of tags, commonly workflow-related; e.g. "Needs review by Dr. Jones". CommonTags (example) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
implicitRules	Σ ?!	0..1	uri	There are no (further) constraints on this element Element id Organization.implicitRules Short description A set of rules under which this content was created Definition A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc. Comments Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
language		0..1	codeBinding	There are no (further) constraints on this element Element id Organization.language Short description Language of the resource content Definition The base language in which the resource is written. Comments Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute). Data type code Binding A human language. CommonLanguages (preferred) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
text		0..1	Narrative	Element id Organization.text Short description Text summary of the resource, for human interpretation Alternate names narrative, html, xhtml, display Definition In diesem Element können die in der Instanz enthaltenen Informationen in einer menschenlesbaren Form zusammengefasst werden. Dabei ist zu beachten, dass keine Informationen aufgenommen werden dürfen, die nicht in strukturierter Form an anderer Stelle in der Instanz enthalten sind. Comments Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later. Data type Narrative Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: Act.text?
id		0..1	string	There are no (further) constraints on this element Element id Organization.text.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Organization.text.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a
status		1..1	codeBindingFixed Value	Element id Organization.text.status Short description generated \| extensions \| additional \| empty Definition The status of the narrative - whether it's entirely generated (from just the defined data or the extensions too), or whether a human authored it and it may contain additional data. Data type code Binding The status of a resource narrative. NarrativeStatus (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Fixed value extensions Mappings rim: N/A
div	I	1..1	xhtml	There are no (further) constraints on this element Element id Organization.text.div Short description Limited xhtml content Definition The actual narrative content, a stripped down version of XHTML. Comments The contents of the html element are an XHTML fragment containing only the basic html formatting elements described in chapters 7-11 and 15 of the HTML 4.0 standard, <a> elements (either name or href), images and internally contained stylesheets. The XHTML content SHALL NOT contain a head, a body, external stylesheet references, scripts, forms, base/link/xlink, frames, iframes and objects. Data type xhtml Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` txt-1: The narrative SHALL contain only the basic html formatting elements and attributes described in chapters 7-11 (except section 4 of chapter 9) and 15 of the HTML 4.0 standard, <a> elements (either name or href), images and internally contained style attributes `htmlChecks()` txt-2: The narrative SHALL have some non-whitespace content `htmlChecks()` Mappings rim: N/A
contained		0..*	Resource	There are no (further) constraints on this element Element id Organization.contained Short description Contained, inline Resources Alternate names inline resources, anonymous resources, contained resources Definition These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope. Comments This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels. Data type Resource Mappings rim: N/A
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Organization.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: N/A
ergaenzende_Angaben	I	0..1	Extension(string)	There are no (further) constraints on this element Element id Organization.extension:ergaenzende_Angaben Short description Ergänzende Angaben Alternate names extensions, user content Definition Mit diesem Profil ist eine zusätzlicher Kommentar/Information definiert worden. Dieser kann an diverse Ressourcen hinzugefügt werden. Der Informationsgehalt der beinhaltenden Ressource darf nicht grundlegend verändert oder negiert werden. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension(string) Extension URL https://fhir.kbv.de/StructureDefinition/KBV_EX_Base_Additional_Comment Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: N/A rim: n/a
modifierExtension	?! I	0..*	Extension	There are no (further) constraints on this element Element id Organization.modifierExtension Short description Extensions that cannot be ignored Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: N/A
identifier	S Σ I	1..*	Identifier	Element id Organization.identifier Short description Identifier einer Praxis / medizinischen Einrichtung Definition Identifier for the organization that is used to identify the organization across multiple disparate systems. Requirements Organizations are known by a variety of ids. Some institutions maintain several, and most collect identifiers for exchange with other organizations concerning the organization. Data type Identifier Sliced: Unordered, Open, by type(Value) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings w5: FiveWs.identifier v2: XON.10 / XON.3 rim: .scopes[Role](classCode=IDENT) servd: ./Identifiers
Institutionskennzeichen	Σ I	0..*	IdentifierIknr	There are no (further) constraints on this element Element id Organization.identifier:Institutionskennzeichen Short description An identifier intended for computation Definition An identifier - identifies some entity uniquely and unambiguously. Typically this is used for business identifiers. Requirements Organizations are known by a variety of ids. Some institutions maintain several, and most collect identifiers for exchange with other organizations concerning the organization. Data type IdentifierIknr Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings w5: FiveWs.identifier v2: XON.10 / XON.3 rim: .scopes[Role](classCode=IDENT) servd: ./Identifiers rim: n/a v2: CX / EI (occasionally, more often EI maps to a resource id or a URL) rim: II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd: Identifier
id		0..1	string	There are no (further) constraints on this element Element id Organization.identifier:Institutionskennzeichen.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Organization.identifier:Institutionskennzeichen.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a
use	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element id Organization.identifier:Institutionskennzeichen.use Short description usual \| official \| temp \| secondary \| old (If known) Definition The purpose of this identifier. Requirements Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. Comments Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. Data type code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: N/A rim: Role.code or implied by context
type	Σ	1..1	CodeableConceptBindingPattern	There are no (further) constraints on this element Element id Organization.identifier:Institutionskennzeichen.type Short description Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. Requirements Allows users to make use of identifiers when the identifier system is not known. Comments This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. Data type CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. IdentifierTypeDeBasis (extensible) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Pattern { "coding": [ { "system": "http://terminology.hl7.org/CodeSystem/v2-0203", "code": "XX" } ] } Mappings v2: CX.5 rim: Role.code or implied by context
id		0..1	string	There are no (further) constraints on this element Element id Organization.identifier:Institutionskennzeichen.type.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Organization.identifier:Institutionskennzeichen.type.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a
coding	Σ	1..1	CodingPattern	There are no (further) constraints on this element Element id Organization.identifier:Institutionskennzeichen.type.coding Short description Code defined by a terminology system Definition A reference to a code defined by a terminology system. Requirements Allows for alternative encodings within a code system, and translations to other code systems. Comments Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. Data type Coding Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Pattern { "system": "http://terminology.hl7.org/CodeSystem/v2-0203", "code": "XX" } Mappings v2: CE.1-8, CE.10-22 rim: union(., ./translation) orim: fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
id		0..1	string	There are no (further) constraints on this element Element id Organization.identifier:Institutionskennzeichen.type.coding.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Organization.identifier:Institutionskennzeichen.type.coding.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a
system	Σ	1..1	uriPattern	There are no (further) constraints on this element Element id Organization.identifier:Institutionskennzeichen.type.coding.system Short description Identity of the terminology system Definition The identification of the code system that defines the meaning of the symbol in the code. Requirements Need to be unambiguous about the source of the definition of the symbol. Comments The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Pattern http://terminology.hl7.org/CodeSystem/v2-0203 Mappings v2: CE.3 rim:* ./codeSystem orim: fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem
version	Σ	0..1	string	There are no (further) constraints on this element Element id Organization.identifier:Institutionskennzeichen.type.coding.version Short description Version of the system - if relevant Definition The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged. Comments Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: CE.7 rim:* ./codeSystemVersion orim: fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion
code	Σ	1..1	codePattern	There are no (further) constraints on this element Element id Organization.identifier:Institutionskennzeichen.type.coding.code Short description Symbol in syntax defined by the system Definition A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination). Requirements Need to refer to a particular code in the system. Data type code Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Pattern XX Mappings v2: CE.1 rim:* ./code orim: fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code
display	Σ	0..1	stringPattern	There are no (further) constraints on this element Element id Organization.identifier:Institutionskennzeichen.type.coding.display Short description Representation defined by the system Definition A representation of the meaning of the code in the system, following the rules of the system. Requirements Need to be able to carry a human-readable meaning of the code for readers that do not know the system. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Pattern Organisations-ID Mappings v2: CE.2 - but note this is not well followed rim:* CV.displayName orim: fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName
userSelected	Σ	0..1	boolean	There are no (further) constraints on this element Element id Organization.identifier:Institutionskennzeichen.type.coding.userSelected Short description If this coding was chosen directly by the user Definition Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays). Requirements This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing. Comments Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely. Data type boolean Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: Sometimes implied by being first rim: CD.codingRationale orim: fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]
text	Σ	0..1	string	There are no (further) constraints on this element Element id Organization.identifier:Institutionskennzeichen.type.text Short description Plain text representation of the concept Definition A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user. Requirements The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source. Comments Very often the text is the same as a displayName of one of the codings. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: CE.9. But note many systems use CE.2 for this rim: ./originalText[mediaType/code="text/plain"]/data orim: fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText
system	Σ	1..1	uriFixed Value	There are no (further) constraints on this element Element id Organization.identifier:Institutionskennzeichen.system Short description The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique. Requirements There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. Comments Identifier.system is always case sensitive. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Fixed value http://fhir.de/sid/arge-ik/iknr Mappings v2: CX.4 / EI-2-4 rim: II.root or Role.id.root servd: ./IdentifierType
value	Σ I	1..1	string	There are no (further) constraints on this element Element id Organization.identifier:Institutionskennzeichen.value Short description The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system. Comments If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ik-1: Eine IK muss 8- (ohne Prüfziffer) oder 9-stellig (mit Prüfziffer) sein `matches('[0-9]{8,9}')` Examples General 123456 Mappings v2: CX.1 / EI.1 rim: II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd: ./Value
period	Σ	0..1	Period	There are no (further) constraints on this element Element id Organization.identifier:Institutionskennzeichen.period Short description Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use. Data type Period Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: CX.7 + CX.8 rim: Role.effectiveTime or implied by context servd: ./StartDate and ./EndDate
assigner	Σ	0..1	Reference(Organization)	There are no (further) constraints on this element Element id Organization.identifier:Institutionskennzeichen.assigner Short description Organization that issued id (may be just text) Definition Organization that issued/manages the identifier. Comments The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. Data type Reference(Organization) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: CX.4 / (CX.4,CX.9,CX.10) rim: II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd: ./IdentifierIssuingAuthority
Betriebsstaettennummer	S Σ I	1..1	IdentifierBsnr	Element id Organization.identifier:Betriebsstaettennummer Short description BSNR Definition Die Betriebsstättennummer der Praxis / medizinischen Einrichtung Requirements Organizations are known by a variety of ids. Some institutions maintain several, and most collect identifiers for exchange with other organizations concerning the organization. Data type IdentifierBsnr Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings w5: FiveWs.identifier v2: XON.10 / XON.3 rim: .scopes[Role](classCode=IDENT) servd: ./Identifiers rim: n/a v2: CX / EI (occasionally, more often EI maps to a resource id or a URL) rim: II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd: Identifier
id		0..1	string	There are no (further) constraints on this element Element id Organization.identifier:Betriebsstaettennummer.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Organization.identifier:Betriebsstaettennummer.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a
use	Σ ?!	0..1	codeBindingFixed Value	There are no (further) constraints on this element Element id Organization.identifier:Betriebsstaettennummer.use Short description usual \| official \| temp \| secondary \| old (If known) Definition The purpose of this identifier. Requirements Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. Comments Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. Data type code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Fixed value official Mappings v2: N/A rim: Role.code or implied by context
type	S Σ	1..1	CodeableConceptBindingPattern	There are no (further) constraints on this element Element id Organization.identifier:Betriebsstaettennummer.type Short description Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. Requirements Allows users to make use of identifiers when the identifier system is not known. Comments This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. Data type CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. IdentifierTypeDeBasis (extensible) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Pattern { "coding": [ { "system": "http://terminology.hl7.org/CodeSystem/v2-0203", "code": "BSNR" } ] } Mappings v2: CX.5 rim: Role.code or implied by context
id		0..1	string	There are no (further) constraints on this element Element id Organization.identifier:Betriebsstaettennummer.type.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Organization.identifier:Betriebsstaettennummer.type.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a
coding	S Σ	1..1	CodingPattern	There are no (further) constraints on this element Element id Organization.identifier:Betriebsstaettennummer.type.coding Short description Code defined by a terminology system Definition A reference to a code defined by a terminology system. Requirements Allows for alternative encodings within a code system, and translations to other code systems. Comments Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. Data type Coding Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Pattern { "system": "http://terminology.hl7.org/CodeSystem/v2-0203", "code": "BSNR" } Mappings v2: CE.1-8, CE.10-22 rim: union(., ./translation) orim: fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
id		0..1	string	There are no (further) constraints on this element Element id Organization.identifier:Betriebsstaettennummer.type.coding.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Organization.identifier:Betriebsstaettennummer.type.coding.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a
system	S Σ	1..1	uriPattern	There are no (further) constraints on this element Element id Organization.identifier:Betriebsstaettennummer.type.coding.system Short description Identity of the terminology system Definition The identification of the code system that defines the meaning of the symbol in the code. Requirements Need to be unambiguous about the source of the definition of the symbol. Comments The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Pattern http://terminology.hl7.org/CodeSystem/v2-0203 Mappings v2: CE.3 rim:* ./codeSystem orim: fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem
version	S Σ	0..1	string	There are no (further) constraints on this element Element id Organization.identifier:Betriebsstaettennummer.type.coding.version Short description Version of the system - if relevant Definition The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged. Comments Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: CE.7 rim:* ./codeSystemVersion orim: fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion
code	S Σ	1..1	codePattern	There are no (further) constraints on this element Element id Organization.identifier:Betriebsstaettennummer.type.coding.code Short description Symbol in syntax defined by the system Definition A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination). Requirements Need to refer to a particular code in the system. Data type code Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Pattern BSNR Mappings v2: CE.1 rim:* ./code orim: fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code
display	S Σ	1..1	stringPattern	There are no (further) constraints on this element Element id Organization.identifier:Betriebsstaettennummer.type.coding.display Short description Representation defined by the system Definition A representation of the meaning of the code in the system, following the rules of the system. Requirements Need to be able to carry a human-readable meaning of the code for readers that do not know the system. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Pattern Primary physician office number Mappings v2: CE.2 - but note this is not well followed rim:* CV.displayName orim: fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName
userSelected	Σ	0..1	boolean	There are no (further) constraints on this element Element id Organization.identifier:Betriebsstaettennummer.type.coding.userSelected Short description If this coding was chosen directly by the user Definition Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays). Requirements This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing. Comments Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely. Data type boolean Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: Sometimes implied by being first rim: CD.codingRationale orim: fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]
text	Σ	0..1	string	There are no (further) constraints on this element Element id Organization.identifier:Betriebsstaettennummer.type.text Short description Plain text representation of the concept Definition A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user. Requirements The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source. Comments Very often the text is the same as a displayName of one of the codings. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: CE.9. But note many systems use CE.2 for this rim: ./originalText[mediaType/code="text/plain"]/data orim: fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText
system	S Σ	1..1	uriFixed Value	There are no (further) constraints on this element Element id Organization.identifier:Betriebsstaettennummer.system Short description The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique. Requirements There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. Comments Identifier.system is always case sensitive. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Fixed value https://fhir.kbv.de/NamingSystem/KBV_NS_Base_BSNR Mappings v2: CX.4 / EI-2-4 rim: II.root or Role.id.root servd: ./IdentifierType
value	S Σ I	1..1	string	Element id Organization.identifier:Betriebsstaettennummer.value Short description BSNR Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system. Comments If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` bsnr-1: Eine BSNR muss 9-stellig numerisch sein `matches('^[0-9]{9}$')` Examples General 123456 Mappings v2: CX.1 / EI.1 rim: II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd: ./Value
period	Σ	0..1	Period	There are no (further) constraints on this element Element id Organization.identifier:Betriebsstaettennummer.period Short description Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use. Data type Period Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: CX.7 + CX.8 rim: Role.effectiveTime or implied by context servd: ./StartDate and ./EndDate
assigner	Σ	0..1	Reference(Organization)	There are no (further) constraints on this element Element id Organization.identifier:Betriebsstaettennummer.assigner Short description Organization that issued id (may be just text) Definition Organization that issued/manages the identifier. Comments The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. Data type Reference(Organization) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: CX.4 / (CX.4,CX.9,CX.10) rim: II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd: ./IdentifierIssuingAuthority
id		0..1	string	There are no (further) constraints on this element Element id Organization.identifier:Betriebsstaettennummer.assigner.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Organization.identifier:Betriebsstaettennummer.assigner.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a
reference	Σ I	0..1	string	There are no (further) constraints on this element Element id Organization.identifier:Betriebsstaettennummer.assigner.reference Short description Literal reference, Relative, internal or absolute URL Definition A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources. Comments Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: N/A
type	Σ	0..1	uriBinding	There are no (further) constraints on this element Element id Organization.identifier:Betriebsstaettennummer.assigner.type Short description Type the reference refers to (e.g. "Patient") Definition The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent. The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources). Comments This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified. Data type uri Binding Aa resource (or, for logical models, the URI of the logical model). ResourceType (extensible) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: N/A
identifier	Σ	0..1	Identifier	There are no (further) constraints on this element Element id Organization.identifier:Betriebsstaettennummer.assigner.identifier Short description Logical reference, when literal reference is not known Definition An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference. Comments When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it. Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation\|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any). Data type Identifier Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: .identifier
id		0..1	string	There are no (further) constraints on this element Element id Organization.identifier:Betriebsstaettennummer.assigner.identifier.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Organization.identifier:Betriebsstaettennummer.assigner.identifier.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a
use	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element id Organization.identifier:Betriebsstaettennummer.assigner.identifier.use Short description usual \| official \| temp \| secondary \| old (If known) Definition The purpose of this identifier. Requirements Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. Comments Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. Data type code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: N/A rim: Role.code or implied by context
type	Σ	0..1	CodeableConceptBinding	There are no (further) constraints on this element Element id Organization.identifier:Betriebsstaettennummer.assigner.identifier.type Short description Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. Requirements Allows users to make use of identifiers when the identifier system is not known. Comments This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. Data type CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: CX.5 rim: Role.code or implied by context
system	Σ	1..1	uriFixed Value	There are no (further) constraints on this element Element id Organization.identifier:Betriebsstaettennummer.assigner.identifier.system Short description The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique. Requirements There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. Comments Identifier.system is always case sensitive. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Fixed value http://fhir.de/sid/arge-ik/iknr Mappings v2: CX.4 / EI-2-4 rim: II.root or Role.id.root servd: ./IdentifierType
value	Σ I	1..1	string	There are no (further) constraints on this element Element id Organization.identifier:Betriebsstaettennummer.assigner.identifier.value Short description The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system. Comments If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` bsnr-1: Eine BSNR muss neunstellig numerisch sein `matches('[0-9]{9}')` Examples General 123456 Mappings v2: CX.1 / EI.1 rim: II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd: ./Value
period	Σ	0..1	Period	There are no (further) constraints on this element Element id Organization.identifier:Betriebsstaettennummer.assigner.identifier.period Short description Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use. Data type Period Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: CX.7 + CX.8 rim: Role.effectiveTime or implied by context servd: ./StartDate and ./EndDate
assigner	Σ	0..1	Reference(Organization)	There are no (further) constraints on this element Element id Organization.identifier:Betriebsstaettennummer.assigner.identifier.assigner Short description Organization that issued id (may be just text) Definition Organization that issued/manages the identifier. Comments The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. Data type Reference(Organization) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: CX.4 / (CX.4,CX.9,CX.10) rim: II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd: ./IdentifierIssuingAuthority
display	Σ	1..1	string	There are no (further) constraints on this element Element id Organization.identifier:Betriebsstaettennummer.assigner.display Short description Text alternative for the resource Definition Plain text narrative that identifies the resource in addition to the resource reference. Comments This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: N/A
VKNR	Σ I	0..*	IdentifierVknr	There are no (further) constraints on this element Element id Organization.identifier:VKNR Short description An identifier intended for computation Definition An identifier - identifies some entity uniquely and unambiguously. Typically this is used for business identifiers. Requirements Organizations are known by a variety of ids. Some institutions maintain several, and most collect identifiers for exchange with other organizations concerning the organization. Data type IdentifierVknr Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings w5: FiveWs.identifier v2: XON.10 / XON.3 rim: .scopes[Role](classCode=IDENT) servd: ./Identifiers rim: n/a v2: CX / EI (occasionally, more often EI maps to a resource id or a URL) rim: II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd: Identifier
id		0..1	string	There are no (further) constraints on this element Element id Organization.identifier:VKNR.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Organization.identifier:VKNR.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a
use	Σ ?!	0..1	codeBindingFixed Value	There are no (further) constraints on this element Element id Organization.identifier:VKNR.use Short description usual \| official \| temp \| secondary \| old (If known) Definition The purpose of this identifier. Requirements Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. Comments Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. Data type code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Fixed value official Mappings v2: N/A rim: Role.code or implied by context
type	Σ	1..1	CodeableConceptBindingPattern	There are no (further) constraints on this element Element id Organization.identifier:VKNR.type Short description Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. Requirements Allows users to make use of identifiers when the identifier system is not known. Comments This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. Data type CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. IdentifierTypeDeBasis (extensible) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Pattern { "coding": [ { "system": "http://terminology.hl7.org/CodeSystem/v2-0203", "code": "NIIP" } ] } Mappings v2: CX.5 rim: Role.code or implied by context
id		0..1	string	There are no (further) constraints on this element Element id Organization.identifier:VKNR.type.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Organization.identifier:VKNR.type.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a
coding	Σ	1..1	CodingPattern	There are no (further) constraints on this element Element id Organization.identifier:VKNR.type.coding Short description Code defined by a terminology system Definition A reference to a code defined by a terminology system. Requirements Allows for alternative encodings within a code system, and translations to other code systems. Comments Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. Data type Coding Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Pattern { "system": "http://terminology.hl7.org/CodeSystem/v2-0203", "code": "NIIP" } Mappings v2: CE.1-8, CE.10-22 rim: union(., ./translation) orim: fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
id		0..1	string	There are no (further) constraints on this element Element id Organization.identifier:VKNR.type.coding.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Organization.identifier:VKNR.type.coding.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a
system	Σ	1..1	uriPattern	There are no (further) constraints on this element Element id Organization.identifier:VKNR.type.coding.system Short description Identity of the terminology system Definition The identification of the code system that defines the meaning of the symbol in the code. Requirements Need to be unambiguous about the source of the definition of the symbol. Comments The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Pattern http://terminology.hl7.org/CodeSystem/v2-0203 Mappings v2: CE.3 rim:* ./codeSystem orim: fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem
version	Σ	0..1	string	There are no (further) constraints on this element Element id Organization.identifier:VKNR.type.coding.version Short description Version of the system - if relevant Definition The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged. Comments Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: CE.7 rim:* ./codeSystemVersion orim: fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion
code	Σ	1..1	codePattern	There are no (further) constraints on this element Element id Organization.identifier:VKNR.type.coding.code Short description Symbol in syntax defined by the system Definition A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination). Requirements Need to refer to a particular code in the system. Data type code Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Pattern NIIP Mappings v2: CE.1 rim:* ./code orim: fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code
display	Σ	0..1	stringPattern	There are no (further) constraints on this element Element id Organization.identifier:VKNR.type.coding.display Short description Representation defined by the system Definition A representation of the meaning of the code in the system, following the rules of the system. Requirements Need to be able to carry a human-readable meaning of the code for readers that do not know the system. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Pattern National Insurance Payor Identifier (Payor) Mappings v2: CE.2 - but note this is not well followed rim:* CV.displayName orim: fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName
userSelected	Σ	0..1	boolean	There are no (further) constraints on this element Element id Organization.identifier:VKNR.type.coding.userSelected Short description If this coding was chosen directly by the user Definition Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays). Requirements This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing. Comments Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely. Data type boolean Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: Sometimes implied by being first rim: CD.codingRationale orim: fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]
text	Σ	0..1	string	There are no (further) constraints on this element Element id Organization.identifier:VKNR.type.text Short description Plain text representation of the concept Definition A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user. Requirements The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source. Comments Very often the text is the same as a displayName of one of the codings. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: CE.9. But note many systems use CE.2 for this rim: ./originalText[mediaType/code="text/plain"]/data orim: fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText
system	Σ	1..1	uriFixed Value	There are no (further) constraints on this element Element id Organization.identifier:VKNR.system Short description The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique. Requirements There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. Comments Identifier.system is always case sensitive. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Fixed value http://fhir.de/sid/kbv/vknr Mappings v2: CX.4 / EI-2-4 rim: II.root or Role.id.root servd: ./IdentifierType
value	Σ	1..1	string	There are no (further) constraints on this element Element id Organization.identifier:VKNR.value Short description The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system. Comments If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General 123456 Mappings v2: CX.1 / EI.1 rim: II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd: ./Value
period	Σ	0..1	Period	There are no (further) constraints on this element Element id Organization.identifier:VKNR.period Short description Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use. Data type Period Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: CX.7 + CX.8 rim: Role.effectiveTime or implied by context servd: ./StartDate and ./EndDate
assigner	Σ	0..1	Reference(Organization)	There are no (further) constraints on this element Element id Organization.identifier:VKNR.assigner Short description Organization that issued id (may be just text) Definition Organization that issued/manages the identifier. Comments The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. Data type Reference(Organization) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: CX.4 / (CX.4,CX.9,CX.10) rim: II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd: ./IdentifierIssuingAuthority
id		0..1	string	There are no (further) constraints on this element Element id Organization.identifier:VKNR.assigner.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Organization.identifier:VKNR.assigner.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a
reference	Σ I	0..1	string	There are no (further) constraints on this element Element id Organization.identifier:VKNR.assigner.reference Short description Literal reference, Relative, internal or absolute URL Definition A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources. Comments Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: N/A
type	Σ	0..1	uriBinding	There are no (further) constraints on this element Element id Organization.identifier:VKNR.assigner.type Short description Type the reference refers to (e.g. "Patient") Definition The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent. The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources). Comments This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified. Data type uri Binding Aa resource (or, for logical models, the URI of the logical model). ResourceType (extensible) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: N/A
identifier	Σ	0..1	Identifier	There are no (further) constraints on this element Element id Organization.identifier:VKNR.assigner.identifier Short description Logical reference, when literal reference is not known Definition An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference. Comments When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it. Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation\|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any). Data type Identifier Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: .identifier
id		0..1	string	There are no (further) constraints on this element Element id Organization.identifier:VKNR.assigner.identifier.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Organization.identifier:VKNR.assigner.identifier.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a
use	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element id Organization.identifier:VKNR.assigner.identifier.use Short description usual \| official \| temp \| secondary \| old (If known) Definition The purpose of this identifier. Requirements Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. Comments Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. Data type code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: N/A rim: Role.code or implied by context
type	Σ	0..1	CodeableConceptBinding	There are no (further) constraints on this element Element id Organization.identifier:VKNR.assigner.identifier.type Short description Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. Requirements Allows users to make use of identifiers when the identifier system is not known. Comments This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. Data type CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: CX.5 rim: Role.code or implied by context
system	Σ	1..1	uriFixed Value	There are no (further) constraints on this element Element id Organization.identifier:VKNR.assigner.identifier.system Short description The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique. Requirements There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. Comments Identifier.system is always case sensitive. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Fixed value http://fhir.de/sid/arge-ik/iknr Mappings v2: CX.4 / EI-2-4 rim: II.root or Role.id.root servd: ./IdentifierType
value	Σ	1..1	string	There are no (further) constraints on this element Element id Organization.identifier:VKNR.assigner.identifier.value Short description The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system. Comments If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General 123456 Mappings v2: CX.1 / EI.1 rim: II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd: ./Value
period	Σ	0..1	Period	There are no (further) constraints on this element Element id Organization.identifier:VKNR.assigner.identifier.period Short description Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use. Data type Period Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: CX.7 + CX.8 rim: Role.effectiveTime or implied by context servd: ./StartDate and ./EndDate
assigner	Σ	0..1	Reference(Organization)	There are no (further) constraints on this element Element id Organization.identifier:VKNR.assigner.identifier.assigner Short description Organization that issued id (may be just text) Definition Organization that issued/manages the identifier. Comments The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. Data type Reference(Organization) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: CX.4 / (CX.4,CX.9,CX.10) rim: II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd: ./IdentifierIssuingAuthority
display	Σ	1..1	string	There are no (further) constraints on this element Element id Organization.identifier:VKNR.assigner.display Short description Text alternative for the resource Definition Plain text narrative that identifies the resource in addition to the resource reference. Comments This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: N/A
KZV-Abrechnungsnummer	Σ I	0..1	IdentifierKzva	There are no (further) constraints on this element Element id Organization.identifier:KZV-Abrechnungsnummer Short description An identifier intended for computation Definition An identifier - identifies some entity uniquely and unambiguously. Typically this is used for business identifiers. Requirements Organizations are known by a variety of ids. Some institutions maintain several, and most collect identifiers for exchange with other organizations concerning the organization. Data type IdentifierKzva Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings w5: FiveWs.identifier v2: XON.10 / XON.3 rim: .scopes[Role](classCode=IDENT) servd: ./Identifiers rim: n/a v2: CX / EI (occasionally, more often EI maps to a resource id or a URL) rim: II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd: Identifier
id		0..1	string	There are no (further) constraints on this element Element id Organization.identifier:KZV-Abrechnungsnummer.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Organization.identifier:KZV-Abrechnungsnummer.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a
use	Σ ?!	0..1	codeBindingFixed Value	There are no (further) constraints on this element Element id Organization.identifier:KZV-Abrechnungsnummer.use Short description usual \| official \| temp \| secondary \| old (If known) Definition The purpose of this identifier. Requirements Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. Comments Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. Data type code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Fixed value official Mappings v2: N/A rim: Role.code or implied by context
type	Σ	1..1	CodeableConceptBindingPattern	There are no (further) constraints on this element Element id Organization.identifier:KZV-Abrechnungsnummer.type Short description Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. Requirements Allows users to make use of identifiers when the identifier system is not known. Comments This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. Data type CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. IdentifierTypeDeBasis (extensible) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Pattern { "coding": [ { "system": "http://fhir.de/CodeSystem/identifier-type-de-basis", "code": "KZVA" } ] } Mappings v2: CX.5 rim: Role.code or implied by context
id		0..1	string	There are no (further) constraints on this element Element id Organization.identifier:KZV-Abrechnungsnummer.type.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Organization.identifier:KZV-Abrechnungsnummer.type.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a
coding	Σ	1..1	CodingPattern	There are no (further) constraints on this element Element id Organization.identifier:KZV-Abrechnungsnummer.type.coding Short description Code defined by a terminology system Definition A reference to a code defined by a terminology system. Requirements Allows for alternative encodings within a code system, and translations to other code systems. Comments Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. Data type Coding Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Pattern { "system": "http://fhir.de/CodeSystem/identifier-type-de-basis", "code": "KZVA" } Mappings v2: CE.1-8, CE.10-22 rim: union(., ./translation) orim: fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
id		0..1	string	There are no (further) constraints on this element Element id Organization.identifier:KZV-Abrechnungsnummer.type.coding.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Organization.identifier:KZV-Abrechnungsnummer.type.coding.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a
system	Σ	1..1	uriPattern	There are no (further) constraints on this element Element id Organization.identifier:KZV-Abrechnungsnummer.type.coding.system Short description Identity of the terminology system Definition The identification of the code system that defines the meaning of the symbol in the code. Requirements Need to be unambiguous about the source of the definition of the symbol. Comments The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Pattern http://fhir.de/CodeSystem/identifier-type-de-basis Mappings v2: CE.3 rim:* ./codeSystem orim: fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem
version	Σ	0..1	string	There are no (further) constraints on this element Element id Organization.identifier:KZV-Abrechnungsnummer.type.coding.version Short description Version of the system - if relevant Definition The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged. Comments Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: CE.7 rim:* ./codeSystemVersion orim: fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion
code	Σ	1..1	codePattern	There are no (further) constraints on this element Element id Organization.identifier:KZV-Abrechnungsnummer.type.coding.code Short description Symbol in syntax defined by the system Definition A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination). Requirements Need to refer to a particular code in the system. Data type code Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Pattern KZVA Mappings v2: CE.1 rim:* ./code orim: fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code
display	Σ	0..1	stringPattern	There are no (further) constraints on this element Element id Organization.identifier:KZV-Abrechnungsnummer.type.coding.display Short description Representation defined by the system Definition A representation of the meaning of the code in the system, following the rules of the system. Requirements Need to be able to carry a human-readable meaning of the code for readers that do not know the system. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Pattern KZVAbrechnungsnummer Mappings v2: CE.2 - but note this is not well followed rim:* CV.displayName orim: fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName
userSelected	Σ	0..1	boolean	There are no (further) constraints on this element Element id Organization.identifier:KZV-Abrechnungsnummer.type.coding.userSelected Short description If this coding was chosen directly by the user Definition Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays). Requirements This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing. Comments Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely. Data type boolean Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: Sometimes implied by being first rim: CD.codingRationale orim: fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]
text	Σ	0..1	string	There are no (further) constraints on this element Element id Organization.identifier:KZV-Abrechnungsnummer.type.text Short description Plain text representation of the concept Definition A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user. Requirements The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source. Comments Very often the text is the same as a displayName of one of the codings. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: CE.9. But note many systems use CE.2 for this rim: ./originalText[mediaType/code="text/plain"]/data orim: fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText
system	Σ	1..1	uriFixed Value	There are no (further) constraints on this element Element id Organization.identifier:KZV-Abrechnungsnummer.system Short description The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique. Requirements There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. Comments Identifier.system is always case sensitive. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Fixed value http://fhir.de/sid/kzbv/kzvabrechnungsnummer Mappings v2: CX.4 / EI-2-4 rim: II.root or Role.id.root servd: ./IdentifierType
value	Σ I	1..1	string	There are no (further) constraints on this element Element id Organization.identifier:KZV-Abrechnungsnummer.value Short description The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system. Comments If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` kzva-1: Die KZVAbrechnungsnummer muss 9-stellig numerisch sein `matches('[0-9]{9}')` Examples General 123456 Mappings v2: CX.1 / EI.1 rim: II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd: ./Value
period	Σ	0..1	Period	There are no (further) constraints on this element Element id Organization.identifier:KZV-Abrechnungsnummer.period Short description Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use. Data type Period Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: CX.7 + CX.8 rim: Role.effectiveTime or implied by context servd: ./StartDate and ./EndDate
assigner	Σ	0..1	Reference(Organization)	There are no (further) constraints on this element Element id Organization.identifier:KZV-Abrechnungsnummer.assigner Short description Organization that issued id (may be just text) Definition Organization that issued/manages the identifier. Comments The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. Data type Reference(Organization) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: CX.4 / (CX.4,CX.9,CX.10) rim: II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd: ./IdentifierIssuingAuthority
id		0..1	string	There are no (further) constraints on this element Element id Organization.identifier:KZV-Abrechnungsnummer.assigner.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Organization.identifier:KZV-Abrechnungsnummer.assigner.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a
reference	Σ I	0..1	string	There are no (further) constraints on this element Element id Organization.identifier:KZV-Abrechnungsnummer.assigner.reference Short description Literal reference, Relative, internal or absolute URL Definition A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources. Comments Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: N/A
type	Σ	0..1	uriBinding	There are no (further) constraints on this element Element id Organization.identifier:KZV-Abrechnungsnummer.assigner.type Short description Type the reference refers to (e.g. "Patient") Definition The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent. The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources). Comments This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified. Data type uri Binding Aa resource (or, for logical models, the URI of the logical model). ResourceType (extensible) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: N/A
identifier	Σ	0..1	Identifier	There are no (further) constraints on this element Element id Organization.identifier:KZV-Abrechnungsnummer.assigner.identifier Short description Logical reference, when literal reference is not known Definition An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference. Comments When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it. Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation\|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any). Data type Identifier Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: .identifier
id		0..1	string	There are no (further) constraints on this element Element id Organization.identifier:KZV-Abrechnungsnummer.assigner.identifier.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Organization.identifier:KZV-Abrechnungsnummer.assigner.identifier.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a
use	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element id Organization.identifier:KZV-Abrechnungsnummer.assigner.identifier.use Short description usual \| official \| temp \| secondary \| old (If known) Definition The purpose of this identifier. Requirements Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. Comments Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. Data type code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: N/A rim: Role.code or implied by context
type	Σ	0..1	CodeableConceptBinding	There are no (further) constraints on this element Element id Organization.identifier:KZV-Abrechnungsnummer.assigner.identifier.type Short description Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. Requirements Allows users to make use of identifiers when the identifier system is not known. Comments This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. Data type CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: CX.5 rim: Role.code or implied by context
system	Σ	1..1	uriFixed Value	There are no (further) constraints on this element Element id Organization.identifier:KZV-Abrechnungsnummer.assigner.identifier.system Short description The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique. Requirements There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. Comments Identifier.system is always case sensitive. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Fixed value http://fhir.de/sid/arge-ik/iknr Mappings v2: CX.4 / EI-2-4 rim: II.root or Role.id.root servd: ./IdentifierType
value	Σ	1..1	string	There are no (further) constraints on this element Element id Organization.identifier:KZV-Abrechnungsnummer.assigner.identifier.value Short description The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system. Comments If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General 123456 Mappings v2: CX.1 / EI.1 rim: II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd: ./Value
period	Σ	0..1	Period	There are no (further) constraints on this element Element id Organization.identifier:KZV-Abrechnungsnummer.assigner.identifier.period Short description Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use. Data type Period Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: CX.7 + CX.8 rim: Role.effectiveTime or implied by context servd: ./StartDate and ./EndDate
assigner	Σ	0..1	Reference(Organization)	There are no (further) constraints on this element Element id Organization.identifier:KZV-Abrechnungsnummer.assigner.identifier.assigner Short description Organization that issued id (may be just text) Definition Organization that issued/manages the identifier. Comments The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. Data type Reference(Organization) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: CX.4 / (CX.4,CX.9,CX.10) rim: II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd: ./IdentifierIssuingAuthority
display	Σ	1..1	string	There are no (further) constraints on this element Element id Organization.identifier:KZV-Abrechnungsnummer.assigner.display Short description Text alternative for the resource Definition Plain text narrative that identifies the resource in addition to the resource reference. Comments This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: N/A
Telematik-ID	Σ I	0..*	IdentifierTelematikId	There are no (further) constraints on this element Element id Organization.identifier:Telematik-ID Short description An identifier intended for computation Definition An identifier - identifies some entity uniquely and unambiguously. Typically this is used for business identifiers. Requirements Organizations are known by a variety of ids. Some institutions maintain several, and most collect identifiers for exchange with other organizations concerning the organization. Data type IdentifierTelematikId Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings w5: FiveWs.identifier v2: XON.10 / XON.3 rim: .scopes[Role](classCode=IDENT) servd: ./Identifiers rim: n/a v2: CX / EI (occasionally, more often EI maps to a resource id or a URL) rim: II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd: Identifier
id		0..1	string	There are no (further) constraints on this element Element id Organization.identifier:Telematik-ID.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Organization.identifier:Telematik-ID.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a
use	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element id Organization.identifier:Telematik-ID.use Short description usual \| official \| temp \| secondary \| old (If known) Definition The purpose of this identifier. Requirements Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. Comments Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. Data type code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: N/A rim: Role.code or implied by context
type	Σ	1..1	CodeableConceptBindingPattern	There are no (further) constraints on this element Element id Organization.identifier:Telematik-ID.type Short description Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. Requirements Allows users to make use of identifiers when the identifier system is not known. Comments This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. Data type CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. IdentifierTypeDeBasis (extensible) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Pattern { "coding": [ { "system": "http://terminology.hl7.org/CodeSystem/v2-0203", "code": "PRN" } ] } Mappings v2: CX.5 rim: Role.code or implied by context
id		0..1	string	There are no (further) constraints on this element Element id Organization.identifier:Telematik-ID.type.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Organization.identifier:Telematik-ID.type.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a
coding	Σ	1..1	CodingPattern	There are no (further) constraints on this element Element id Organization.identifier:Telematik-ID.type.coding Short description Code defined by a terminology system Definition A reference to a code defined by a terminology system. Requirements Allows for alternative encodings within a code system, and translations to other code systems. Comments Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. Data type Coding Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Pattern { "system": "http://terminology.hl7.org/CodeSystem/v2-0203", "code": "PRN" } Mappings v2: CE.1-8, CE.10-22 rim: union(., ./translation) orim: fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
id		0..1	string	There are no (further) constraints on this element Element id Organization.identifier:Telematik-ID.type.coding.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Organization.identifier:Telematik-ID.type.coding.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a
system	Σ	1..1	uriPattern	There are no (further) constraints on this element Element id Organization.identifier:Telematik-ID.type.coding.system Short description Identity of the terminology system Definition The identification of the code system that defines the meaning of the symbol in the code. Requirements Need to be unambiguous about the source of the definition of the symbol. Comments The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Pattern http://terminology.hl7.org/CodeSystem/v2-0203 Mappings v2: CE.3 rim:* ./codeSystem orim: fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem
version	Σ	0..1	string	There are no (further) constraints on this element Element id Organization.identifier:Telematik-ID.type.coding.version Short description Version of the system - if relevant Definition The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged. Comments Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: CE.7 rim:* ./codeSystemVersion orim: fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion
code	Σ	1..1	codePattern	There are no (further) constraints on this element Element id Organization.identifier:Telematik-ID.type.coding.code Short description Symbol in syntax defined by the system Definition A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination). Requirements Need to refer to a particular code in the system. Data type code Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Pattern PRN Mappings v2: CE.1 rim:* ./code orim: fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code
display	Σ	0..1	stringPattern	There are no (further) constraints on this element Element id Organization.identifier:Telematik-ID.type.coding.display Short description Representation defined by the system Definition A representation of the meaning of the code in the system, following the rules of the system. Requirements Need to be able to carry a human-readable meaning of the code for readers that do not know the system. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Pattern Provider number Mappings v2: CE.2 - but note this is not well followed rim:* CV.displayName orim: fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName
userSelected	Σ	0..1	boolean	There are no (further) constraints on this element Element id Organization.identifier:Telematik-ID.type.coding.userSelected Short description If this coding was chosen directly by the user Definition Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays). Requirements This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing. Comments Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely. Data type boolean Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: Sometimes implied by being first rim: CD.codingRationale orim: fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]
text	Σ	0..1	string	There are no (further) constraints on this element Element id Organization.identifier:Telematik-ID.type.text Short description Plain text representation of the concept Definition A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user. Requirements The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source. Comments Very often the text is the same as a displayName of one of the codings. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: CE.9. But note many systems use CE.2 for this rim: ./originalText[mediaType/code="text/plain"]/data orim: fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText
system	Σ	1..1	uriFixed Value	There are no (further) constraints on this element Element id Organization.identifier:Telematik-ID.system Short description The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique. Requirements There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. Comments Identifier.system is always case sensitive. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Fixed value https://gematik.de/fhir/sid/telematik-id Mappings v2: CX.4 / EI-2-4 rim: II.root or Role.id.root servd: ./IdentifierType
value	Σ	1..1	string	There are no (further) constraints on this element Element id Organization.identifier:Telematik-ID.value Short description The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system. Comments If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General 123456 Mappings v2: CX.1 / EI.1 rim: II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd: ./Value
period	Σ	0..1	Period	There are no (further) constraints on this element Element id Organization.identifier:Telematik-ID.period Short description Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use. Data type Period Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: CX.7 + CX.8 rim: Role.effectiveTime or implied by context servd: ./StartDate and ./EndDate
assigner	Σ	0..1	Reference(Organization)	There are no (further) constraints on this element Element id Organization.identifier:Telematik-ID.assigner Short description Organization that issued id (may be just text) Definition Organization that issued/manages the identifier. Comments The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. Data type Reference(Organization) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: CX.4 / (CX.4,CX.9,CX.10) rim: II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd: ./IdentifierIssuingAuthority
active	Σ ?!	0..1	boolean	There are no (further) constraints on this element Element id Organization.active Short description Whether the organization's record is still in active use Definition Whether the organization's record is still in active use. Requirements Need a flag to indicate a record is no longer to be used and should generally be hidden for the user in the UI. Comments This active flag is not intended to be used to mark an organization as temporarily closed or under construction. Instead the Location(s) within the Organization should have the suspended status. If further details of the reason for the suspension are required, then an extension on this element should be used. This element is labeled as a modifier because it may be used to mark that the resource was created in error. Meaning when missing This resource is generally assumed to be active if no value is provided for the active element Data type boolean Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings w5: FiveWs.status v2: No equivalent in HL7 v2 rim: .status servd: ./Status (however this concept in ServD more covers why the organization is active or not, could be delisted, deregistered, not operational yet) this could alternatively be derived from ./StartDate and ./EndDate and given a context date.
type	Σ	0..*	CodeableConcept	There are no (further) constraints on this element Element id Organization.type Short description Kind of organization Definition The kind(s) of organization that this is. Requirements Need to be able to track the kind of organization that this is - different organization types have different uses. Comments Organizations can be corporations, wards, sections, clinical teams, government departments, etc. Note that code is generally a classifier of the type of organization; in many applications, codes are used to identity a particular organization (say, ward) as opposed to another of the same type - these are identifiers, not codes When considering if multiple types are appropriate, you should evaluate if child organizations would be a more appropriate use of the concept, as different types likely are in different sub-areas of the organization. This is most likely to be used where type values have orthogonal values, such as a religious, academic and medical center. We expect that some jurisdictions will profile this optionality to be a single cardinality. Data type CodeableConcept Binding Used to categorize the organization. OrganizationType (example) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings w5: FiveWs.class v2: No equivalent in v2 rim: .code servd: n/a
id		0..1	string	There are no (further) constraints on this element Element id Organization.type.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Organization.type.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a
coding	Σ	0..*	Coding	There are no (further) constraints on this element Element id Organization.type.coding Short description Code defined by a terminology system Definition A reference to a code defined by a terminology system. Requirements Allows for alternative encodings within a code system, and translations to other code systems. Comments Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. Data type Coding Sliced: Unordered, Open, by $this(Value) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: CE.1-8, CE.10-22 rim: union(., ./translation) orim: fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
IHE-Code	Σ	0..1	CodingBinding	There are no (further) constraints on this element Element id Organization.type.coding:IHE-Code Short description Code defined by a terminology system Definition Hier kann der Typus der Einrichtung anhand eines Codes aus dem Codesystem IHE Deutschland e.V. angegeben werden. Requirements Allows for alternative encodings within a code system, and translations to other code systems. Comments Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. Data type Coding Binding IHEXDShealthcareFacilityTypeCode (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: CE.1-8, CE.10-22 rim: union(., ./translation) orim: fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
id		0..1	string	There are no (further) constraints on this element Element id Organization.type.coding:IHE-Code.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Organization.type.coding:IHE-Code.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a
system	Σ	1..1	uri	There are no (further) constraints on this element Element id Organization.type.coding:IHE-Code.system Short description Identity of the terminology system Definition The identification of the code system that defines the meaning of the symbol in the code. Requirements Need to be unambiguous about the source of the definition of the symbol. Comments The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: CE.3 rim:* ./codeSystem orim: fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem
version	Σ	1..1	string	There are no (further) constraints on this element Element id Organization.type.coding:IHE-Code.version Short description Version of the system - if relevant Definition The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged. Comments Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: CE.7 rim:* ./codeSystemVersion orim: fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion
code	Σ	1..1	code	There are no (further) constraints on this element Element id Organization.type.coding:IHE-Code.code Short description Symbol in syntax defined by the system Definition A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination). Requirements Need to refer to a particular code in the system. Data type code Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: CE.1 rim:* ./code orim: fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code
display	Σ	1..1	string	There are no (further) constraints on this element Element id Organization.type.coding:IHE-Code.display Short description Representation defined by the system Definition A representation of the meaning of the code in the system, following the rules of the system. Requirements Need to be able to carry a human-readable meaning of the code for readers that do not know the system. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: CE.2 - but note this is not well followed rim:* CV.displayName orim: fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName
userSelected	Σ	0..1	boolean	There are no (further) constraints on this element Element id Organization.type.coding:IHE-Code.userSelected Short description If this coding was chosen directly by the user Definition Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays). Requirements This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing. Comments Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely. Data type boolean Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: Sometimes implied by being first rim: CD.codingRationale orim: fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]
HL7-Fachschluesselgruppe	Σ	0..1	CodingBinding	There are no (further) constraints on this element Element id Organization.type.coding:HL7-Fachschluesselgruppe Short description Code defined by a terminology system Definition Hier wird die Fachrichtung/Fachabteilung anhand eines Codes aus dem Codesystem "Fachabteilungsschlüssel" der HL7 Basis Deutschland angegeben. Requirements Allows for alternative encodings within a code system, and translations to other code systems. Comments Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. Data type Coding Binding FachabteilungsschluesselVS (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: CE.1-8, CE.10-22 rim: union(., ./translation) orim: fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
id		0..1	string	There are no (further) constraints on this element Element id Organization.type.coding:HL7-Fachschluesselgruppe.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Organization.type.coding:HL7-Fachschluesselgruppe.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a
system	Σ	1..1	uri	There are no (further) constraints on this element Element id Organization.type.coding:HL7-Fachschluesselgruppe.system Short description Identity of the terminology system Definition The identification of the code system that defines the meaning of the symbol in the code. Requirements Need to be unambiguous about the source of the definition of the symbol. Comments The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: CE.3 rim:* ./codeSystem orim: fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem
version	Σ	1..1	string	There are no (further) constraints on this element Element id Organization.type.coding:HL7-Fachschluesselgruppe.version Short description Version of the system - if relevant Definition The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged. Comments Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: CE.7 rim:* ./codeSystemVersion orim: fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion
code	Σ	1..1	code	There are no (further) constraints on this element Element id Organization.type.coding:HL7-Fachschluesselgruppe.code Short description Symbol in syntax defined by the system Definition A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination). Requirements Need to refer to a particular code in the system. Data type code Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: CE.1 rim:* ./code orim: fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code
display	Σ	1..1	string	There are no (further) constraints on this element Element id Organization.type.coding:HL7-Fachschluesselgruppe.display Short description Representation defined by the system Definition A representation of the meaning of the code in the system, following the rules of the system. Requirements Need to be able to carry a human-readable meaning of the code for readers that do not know the system. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: CE.2 - but note this is not well followed rim:* CV.displayName orim: fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName
userSelected	Σ	0..1	boolean	There are no (further) constraints on this element Element id Organization.type.coding:HL7-Fachschluesselgruppe.userSelected Short description If this coding was chosen directly by the user Definition Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays). Requirements This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing. Comments Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely. Data type boolean Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: Sometimes implied by being first rim: CD.codingRationale orim: fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]
HL7-Fachschluesselgruppe-erweitert	Σ	0..1	CodingBinding	There are no (further) constraints on this element Element id Organization.type.coding:HL7-Fachschluesselgruppe-erweitert Short description Code defined by a terminology system Definition Hier wird die Fachrichtung/Fachabteilung anhand eines Codes aus dem Codesystem "FachabteilungsschlüsselErweitert" der HL7 Basis Deutschland angegeben. Requirements Allows for alternative encodings within a code system, and translations to other code systems. Comments Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. Data type Coding Binding ValueSetFachabteilungsschluesselErweitert (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: CE.1-8, CE.10-22 rim: union(., ./translation) orim: fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
id		0..1	string	There are no (further) constraints on this element Element id Organization.type.coding:HL7-Fachschluesselgruppe-erweitert.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Organization.type.coding:HL7-Fachschluesselgruppe-erweitert.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a
system	Σ	1..1	uri	There are no (further) constraints on this element Element id Organization.type.coding:HL7-Fachschluesselgruppe-erweitert.system Short description Identity of the terminology system Definition The identification of the code system that defines the meaning of the symbol in the code. Requirements Need to be unambiguous about the source of the definition of the symbol. Comments The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: CE.3 rim:* ./codeSystem orim: fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem
version	Σ	1..1	string	There are no (further) constraints on this element Element id Organization.type.coding:HL7-Fachschluesselgruppe-erweitert.version Short description Version of the system - if relevant Definition The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged. Comments Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: CE.7 rim:* ./codeSystemVersion orim: fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion
code	Σ	1..1	code	There are no (further) constraints on this element Element id Organization.type.coding:HL7-Fachschluesselgruppe-erweitert.code Short description Symbol in syntax defined by the system Definition A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination). Requirements Need to refer to a particular code in the system. Data type code Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: CE.1 rim:* ./code orim: fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code
display	Σ	1..1	string	There are no (further) constraints on this element Element id Organization.type.coding:HL7-Fachschluesselgruppe-erweitert.display Short description Representation defined by the system Definition A representation of the meaning of the code in the system, following the rules of the system. Requirements Need to be able to carry a human-readable meaning of the code for readers that do not know the system. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: CE.2 - but note this is not well followed rim:* CV.displayName orim: fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName
userSelected	Σ	0..1	boolean	There are no (further) constraints on this element Element id Organization.type.coding:HL7-Fachschluesselgruppe-erweitert.userSelected Short description If this coding was chosen directly by the user Definition Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays). Requirements This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing. Comments Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely. Data type boolean Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: Sometimes implied by being first rim: CD.codingRationale orim: fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]
text	Σ	0..1	string	There are no (further) constraints on this element Element id Organization.type.text Short description Plain text representation of the concept Definition A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user. Requirements The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source. Comments Very often the text is the same as a displayName of one of the codings. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: CE.9. But note many systems use CE.2 for this rim: ./originalText[mediaType/code="text/plain"]/data orim: fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText
name	Σ I	0..1	string	There are no (further) constraints on this element Element id Organization.name Short description Name der Einrichtung Definition A name associated with the organization. Requirements Need to use the name as the label of the organization. Comments If the name of an organization changes, consider putting the old name in the alias column so that it can still be located through searches. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: XON.1 rim: .name servd: .PreferredName/Name
alias		0..*	string	There are no (further) constraints on this element Element id Organization.alias Short description A list of alternate names that the organization is known as, or was known as in the past Definition A list of alternate names that the organization is known as, or was known as in the past. Requirements Over time locations and organizations go through many changes and can be known by different names. For searching knowing previous names that the organization was known by can be very useful. Comments There are no dates associated with the alias/historic names, as this is not intended to track when names were used, but to assist in searching so that older names can still result in identifying the organization. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: .name
telecom	I	0..*	KBV_PR_Base_Datatype_Contactpoint	There are no (further) constraints on this element Element id Organization.telecom Short description Details of a Technology mediated contact point (phone, fax, email, etc.) Definition Dieses Element beschreibt die vorhandenen Kontaktmöglichkeiten. Requirements Human contact for the organization. Comments The use code 'home' is not to be used. Note that these contacts are not the contact details of people who are employed by or represent the organization, but official contacts for the organization itself. Data type KBV_PR_Base_Datatype_Contactpoint Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` org-3: The telecom of an organization can never be of use 'home' `where(use = 'home').empty()` cpt-2: A system is required if a value is provided. `value.empty() or system.exists()` Mappings v2: ORC-22? rim: .telecom servd: ./ContactPoints rim: n/a v2: XTN rim: TEL servd: ContactPoint
address	I	0..*	Address	There are no (further) constraints on this element Element id Organization.address Short description An address for the organization Definition An address for the organization. Requirements May need to keep track of the organization's addresses for contacting, billing or reporting requirements. Comments Organization may have multiple addresses with different uses or applicable periods. The use code 'home' is not to be used. Data type Address Sliced: Unordered, Open, by type(Value) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` org-2: An address of an organization can never be of use 'home' `where(use = 'home').empty()` Mappings v2: ORC-23? rim: .address servd: ./PrimaryAddress and ./OtherAddresses
Strassenanschrift	I	0..*	KBV_PR_Base_Datatype_Street_Address	There are no (further) constraints on this element Element id Organization.address:Strassenanschrift Short description Eine Straßenadresse gemäß postalischer Konventionen Definition Hier können Angaben zur Straßenanschrift gemacht werden. Requirements May need to keep track of the organization's addresses for contacting, billing or reporting requirements. Comments Note: address is intended to describe postal addresses for administrative purposes, not to describe absolute geographical coordinates. Postal addresses are often used as proxies for physical locations (also see the Location resource). Data type KBV_PR_Base_Datatype_Street_Address Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` org-2: An address of an organization can never be of use 'home' `where(use = 'home').empty()` add-1: Wenn die Extension 'Hausnummer' verwendet wird, muss auch Address.line gefüllt werden `line.all($this.extension('http://hl7.org/fhir/StructureDefinition/iso21090-ADXP-houseNumber').empty() or $this.hasValue())` add-2: Wenn die Extension 'Strasse' verwendet wird, muss auch Address.line gefüllt werden `line.all($this.extension('http://hl7.org/fhir/StructureDefinition/iso21090-ADXP-streetName').empty() or $this.hasValue())` add-3: Wenn die Extension 'Postfach' verwendet wird, muss auch Address.line gefüllt werden `line.all($this.extension('http://hl7.org/fhir/StructureDefinition/iso21090-ADXP-postBox').empty() or $this.hasValue())` add-4: Eine Postfach-Adresse darf nicht vom Type "physical" oder "both" sein. `line.all($this.extension('http://hl7.org/fhir/StructureDefinition/iso21090-ADXP-postBox').empty() or $this.hasValue()) or type='postal' or type.empty()` add-5: Wenn die Extension 'Adresszusatz' verwendet wird, muss auch Address.line gefüllt werden `line.all($this.extension('http://hl7.org/fhir/StructureDefinition/iso21090-ADXP-additionalLocator').empty() or $this.hasValue())` add-6: Wenn die Extension 'Postfach' verwendet wird, dürfen die Extensions 'Strasse' und 'Hausnummer' nicht verwendet werden `line.all($this.extension('http://hl7.org/fhir/StructureDefinition/iso21090-ADXP-postBox').empty() or ($this.extension('http://hl7.org/fhir/StructureDefinition/iso21090-ADXP-streetName').empty() and $this.extension('http://hl7.org/fhir/StructureDefinition/iso21090-ADXP-houseNumber').empty()))` add-7: Wenn die Extension 'Precinct' (Stadtteil) verwendet wird, dann muss diese Information auch als separates line-item abgebildet sein. `extension('http://hl7.org/fhir/StructureDefinition/iso21090-ADXP-precinct').empty() or all(line contains extension('http://hl7.org/fhir/StructureDefinition/iso21090-ADXP-precinct').value.ofType(string))` Examples Beispiel für einfache Adresse { "use": "home", "type": "postal", "line": [ "Musterweg 42" ], "city": "Musterhausen", "postalCode": "99999" } Mappings v2: ORC-23? rim: .address servd: ./PrimaryAddress and ./OtherAddresses rim: n/a v2: XAD rim: AD servd: Address
Postfach	I	0..*	KBV_PR_Base_Datatype_Post_Office_Box	There are no (further) constraints on this element Element id Organization.address:Postfach Short description Hier können Angaben zu einem Postfach gemacht werden. Definition Eine Adresse gemäß postalischer Konventionen (im Gegensatz zu bspw. GPS-Koordinaten). Die Adresse kann sowohl zur Zustellung von Postsendungen oder zum Aufsuchen von Orten, die keine gültige Postadresse haben, verwendet werden. Die verwendeten Extensions in diesem Profil bilden die Struktur der Adresse ab, wie sie im VSDM-Format der elektronischen Versichertenkarte verwendet wird. Insbesondere bei ausländischenOrt Adresse oder Adressen, die nicht durch Einlesen einer elektronischen Versichertenkarte erfasst wurden, sind abweichende Strukturen möglich. Die Verwendung der Extensions ist nicht verpflichtend. Requirements May need to keep track of the organization's addresses for contacting, billing or reporting requirements. Comments Note: address is intended to describe postal addresses for administrative purposes, not to describe absolute geographical coordinates. Postal addresses are often used as proxies for physical locations (also see the Location resource). Data type KBV_PR_Base_Datatype_Post_Office_Box Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` org-2: An address of an organization can never be of use 'home' `where(use = 'home').empty()` add-1: Wenn die Extension 'Hausnummer' verwendet wird, muss auch Address.line gefüllt werden `line.all($this.extension('http://hl7.org/fhir/StructureDefinition/iso21090-ADXP-houseNumber').empty() or $this.hasValue())` add-2: Wenn die Extension 'Strasse' verwendet wird, muss auch Address.line gefüllt werden `line.all($this.extension('http://hl7.org/fhir/StructureDefinition/iso21090-ADXP-streetName').empty() or $this.hasValue())` add-3: Wenn die Extension 'Postfach' verwendet wird, muss auch Address.line gefüllt werden `line.all($this.extension('http://hl7.org/fhir/StructureDefinition/iso21090-ADXP-postBox').empty() or $this.hasValue())` add-4: Eine Postfach-Adresse darf nicht vom Type "physical" oder "both" sein. `line.all($this.extension('http://hl7.org/fhir/StructureDefinition/iso21090-ADXP-postBox').empty() or $this.hasValue()) or type='postal' or type.empty()` add-5: Wenn die Extension 'Adresszusatz' verwendet wird, muss auch Address.line gefüllt werden `line.all($this.extension('http://hl7.org/fhir/StructureDefinition/iso21090-ADXP-additionalLocator').empty() or $this.hasValue())` add-6: Wenn die Extension 'Postfach' verwendet wird, dürfen die Extensions 'Strasse' und 'Hausnummer' nicht verwendet werden `line.all($this.extension('http://hl7.org/fhir/StructureDefinition/iso21090-ADXP-postBox').empty() or ($this.extension('http://hl7.org/fhir/StructureDefinition/iso21090-ADXP-streetName').empty() and $this.extension('http://hl7.org/fhir/StructureDefinition/iso21090-ADXP-houseNumber').empty()))` add-7: Wenn die Extension 'Precinct' (Stadtteil) verwendet wird, dann muss diese Information auch als separates line-item abgebildet sein. `extension('http://hl7.org/fhir/StructureDefinition/iso21090-ADXP-precinct').empty() or all(line contains extension('http://hl7.org/fhir/StructureDefinition/iso21090-ADXP-precinct').value.ofType(string))` postBox-de-1: Die Extension 'http://hl7.org/fhir/StructureDefinition/iso21090-ADXP-postBox' darf nur einmal vorkommen. `line.where($this.extension('http://hl7.org/fhir/StructureDefinition/iso21090-ADXP-postBox').exists()).count()=1` Examples Beispiel für einfache Adresse { "use": "home", "type": "postal", "line": [ "Musterweg 42" ], "city": "Musterhausen", "postalCode": "99999" } Mappings v2: ORC-23? rim: .address servd: ./PrimaryAddress and ./OtherAddresses rim: n/a v2: XAD rim: AD servd: Address
partOf	Σ	0..1	Reference(Organization)	There are no (further) constraints on this element Element id Organization.partOf Short description The organization of which this organization forms a part Definition The organization of which this organization forms a part. Requirements Need to be able to track the hierarchy of organizations within an organization. Data type Reference(Organization) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: No equivalent in HL7 v2 rim: .playedBy[classCode=Part].scoper servd: n/a
contact		0..*	BackboneElement	There are no (further) constraints on this element Element id Organization.contact Short description Contact for the organization for a certain purpose Definition Contact for the organization for a certain purpose. Requirements Need to keep track of assigned contact points within bigger organization. Comments Where multiple contacts for the same purpose are provided there is a standard extension that can be used to determine which one is the preferred contact to use. Data type BackboneElement Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: .contactParty
id		0..1	string	There are no (further) constraints on this element Element id Organization.contact.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Organization.contact.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id Organization.contact.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: N/A
purpose		0..1	CodeableConceptBinding	There are no (further) constraints on this element Element id Organization.contact.purpose Short description The type of contact Definition Indicates a purpose for which the contact can be reached. Requirements Need to distinguish between multiple contact persons. Data type CodeableConcept Binding The purpose for which you would contact a contact party. ContactEntityType (extensible) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: ./type
name		0..1	HumanName	There are no (further) constraints on this element Element id Organization.contact.name Short description A name associated with the contact Definition A name associated with the contact. Requirements Need to be able to track the person by name. Data type HumanName Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: PID-5, PID-9 rim: ./name
telecom		0..*	ContactPoint	There are no (further) constraints on this element Element id Organization.contact.telecom Short description Contact details (telephone, email, etc.) for a contact Definition A contact detail (e.g. a telephone number or an email address) by which the party may be contacted. Requirements People have (primary) ways to contact them in some way such as phone, email. Data type ContactPoint Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: PID-13, PID-14 rim: ./telecom
address		0..1	Address	There are no (further) constraints on this element Element id Organization.contact.address Short description Visiting or postal addresses for the contact Definition Visiting or postal addresses for the contact. Requirements May need to keep track of a contact party's address for contacting, billing or reporting requirements. Data type Address Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: PID-11 rim: ./addr
id		0..1	string	There are no (further) constraints on this element Element id Organization.contact.address.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Organization.contact.address.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a
use	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element id Organization.contact.address.use Short description home \| work \| temp \| old \| billing - purpose of this address Definition The purpose of this address. Requirements Allows an appropriate address to be chosen from a list of many. Comments Applications can assume that an address is current unless it explicitly says that it is temporary or old. Data type code Binding The use of an address. AddressUse (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General home Mappings v2: XAD.7 rim: unique(./use) servd: ./AddressPurpose
type	Σ	0..1	codeBinding	There are no (further) constraints on this element Element id Organization.contact.address.type Short description postal \| physical \| both Definition Distinguishes between physical addresses (those you can visit) and mailing addresses (e.g. PO Boxes and care-of addresses). Most addresses are both. Comments The definition of Address states that "address is intended to describe postal addresses, not physical locations". However, many applications track whether an address has a dual purpose of being a location that can be visited as well as being a valid delivery destination, and Postal addresses are often used as proxies for physical locations (also see the Location resource). Data type code Binding The type of an address (physical / postal). AddressType (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General both Mappings v2: XAD.18 rim: unique(./use) vcard: address type parameter
text	Σ	0..1	string	There are no (further) constraints on this element Element id Organization.contact.address.text Short description Text representation of the address Definition Specifies the entire address as it should be displayed e.g. on a postal label. This may be provided instead of or as well as the specific parts. Requirements A renderable, unencoded form. Comments Can provide both a text representation and parts. Applications updating an address SHALL ensure that when both text and parts are present, no content is included in the text that isn't found in a part. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General 137 Nowhere Street, Erewhon 9132 Mappings v2: XAD.1 + XAD.2 + XAD.3 + XAD.4 + XAD.5 + XAD.6 rim: ./formatted vcard: address label parameter
line	Σ	0..*	string	There are no (further) constraints on this element Element id Organization.contact.address.line Short description Street name, number, direction & P.O. Box etc. Definition This component contains the house number, apartment number, street name, street direction, P.O. Box number, delivery hints, and similar address information. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General 137 Nowhere Street Mappings v2: XAD.1 + XAD.2 (note: XAD.1 and XAD.2 have different meanings for a company address than for a person address) rim: AD.part[parttype = AL] vcard: street servd: ./StreetAddress (newline delimitted)
city	Σ	0..1	string	There are no (further) constraints on this element Element id Organization.contact.address.city Short description Name of city, town etc. Alternate names Municpality Definition The name of the city, town, suburb, village or other community or delivery center. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General Erewhon Mappings v2: XAD.3 rim: AD.part[parttype = CTY] vcard: locality servd: ./Jurisdiction
district	Σ	0..1	string	There are no (further) constraints on this element Element id Organization.contact.address.district Short description District name (aka county) Alternate names County Definition The name of the administrative area (county). Comments District is sometimes known as county, but in some regions 'county' is used in place of city (municipality), so county name should be conveyed in city instead. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General Madison Mappings v2: XAD.9 rim: AD.part[parttype = CNT \| CPA]
state	Σ	0..1	string	There are no (further) constraints on this element Element id Organization.contact.address.state Short description Sub-unit of country (abbreviations ok) Alternate names Province, Territory Definition Sub-unit of a country with limited sovereignty in a federally organized country. A code may be used if codes are in common use (e.g. US 2 letter state codes). Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: XAD.4 rim: AD.part[parttype = STA] vcard: region servd: ./Region
postalCode	Σ	0..1	string	There are no (further) constraints on this element Element id Organization.contact.address.postalCode Short description Postal code for area Alternate names Zip Definition A postal code designating a region defined by the postal service. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General 9132 Mappings v2: XAD.5 rim: AD.part[parttype = ZIP] vcard: code servd: ./PostalIdentificationCode
country	Σ	0..1	stringBinding	There are no (further) constraints on this element Element id Organization.contact.address.country Short description Staat Definition Angabe des Staates als Länderkennzeichen nach DEUEV Anlage 8. Comments ISO 3166 3 letter codes can be used in place of a human readable country name. Data type string Binding KBV_VS_Base_Deuev_Anlage_8 (extensible) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings v2: XAD.6 rim: AD.part[parttype = CNT] vcard: country servd: ./Country
period	Σ	0..1	Period	There are no (further) constraints on this element Element id Organization.contact.address.period Short description Time period when address was/is in use Definition Time period when address was/is in use. Requirements Allows addresses to be placed in historical context. Data type Period Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General { "start": "2010-03-23", "end": "2010-07-01" } Mappings v2: XAD.12 / XAD.13 + XAD.14 rim: ./usablePeriod[type="IVL<TS>"] servd: ./StartDate and ./EndDate
endpoint		0..*	Reference(Endpoint)	There are no (further) constraints on this element Element id Organization.endpoint Short description Technical endpoints providing access to services operated for the organization Definition Technical endpoints providing access to services operated for the organization. Requirements Organizations have multiple systems that provide various services and need to be able to define the technical connection details for how to connect to them, and for what purpose. Data type Reference(Endpoint) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a

Organization
Definition	Die Einrichtung beschreibt den Ort, an dem ein Kontakt zwischen dem Patienten und der leistungserbringenden Person stattfindet (z.B. eine Praxis).
Cardinality	0...*
Invariants	dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources `contained.contained.empty()` dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource `contained.where((('#'+id in (%resource.descendants().reference \| %resource.descendants().as(canonical) \| %resource.descendants().as(uri) \| %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty()` dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated `contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()` dom-5: If a resource is contained in another resource, it SHALL NOT have a security label `contained.meta.security.empty()` dom-6: A resource should have narrative for robust management text.`div`.exists() org-1: The organization SHALL at least have a name or an identifier, and possibly more than one `(identifier.count() + name.count()) > 0`
Mappings	rim: Entity. Role, or Act v2: (also see master files messages) rim: Organization(classCode=ORG, determinerCode=INST) servd: Organization
Organization.id
Definition	The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.
Cardinality	0...1
Type	string
Summary	True
Comments	The only time that a resource does not have an id is when it is being submitted to the server using a create operation.
Organization.meta
Definition	The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.
Cardinality	1...1
Type	Meta
Summary	True
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Organization.meta.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Cardinality	0...1
Type	string
Mappings	rim: n/a
Organization.meta.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Cardinality	0...*
Type	Extension
Alias	extensions, user content
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Slicing	Unordered, Open, by url(Value)
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()`
Mappings	rim: n/a
Organization.meta.versionId
Definition	The version specific identifier, as it appears in the version portion of the URL. This value changes when the resource is created, updated, or deleted.
Cardinality	0...1
Type	id
Summary	True
Comments	The server assigns this value, and ignores what the client specifies, except in the case that the server is imposing version integrity on updates/deletes.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Organization.meta.lastUpdated
Definition	When the resource last changed - e.g. when the version changed.
Cardinality	0...1
Type	instant
Summary	True
Comments	This value is always populated except when the resource is first being created. The server / resource manager sets this value; what a client provides is irrelevant. This is equivalent to the HTTP Last-Modified and SHOULD have the same value on a read interaction.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Organization.meta.source
Definition	A uri that identifies the source system of the resource. This provides a minimal amount of [Provenance](provenance.html#) information that can be used to track or differentiate the source of information in the resource. The source may identify another FHIR server, document, message, database, etc.
Cardinality	0...1
Type	uri
Summary	True
Comments	In the provenance resource, this corresponds to Provenance.entity.what[x]. The exact use of the source (and the implied Provenance.entity.role) is left to implementer discretion. Only one nominated source is allowed; for additional provenance details, a full Provenance resource should be used. This element can be used to indicate where the current master source of a resource that has a canonical URL if the resource is no longer hosted at the canonical URL.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Organization.meta.profile
Definition	A list of profiles (references to [StructureDefinition](structuredefinition.html#) resources) that this resource claims to conform to. The URL is a reference to [StructureDefinition.url](structuredefinition-definitions.html#StructureDefinition.url).
Cardinality	1...*
Type	canonical(StructureDefinition)
Summary	True
Comments	It is up to the server and/or other infrastructure of policy to determine whether/how these claims are verified and/or updated over time. The list of profile URLs is a set.
Slicing	Unordered, Open, by $this(Value)
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Organization.meta.profile:kvdigitalProfil
Definition	A list of profiles (references to [StructureDefinition](structuredefinition.html#) resources) that this resource claims to conform to. The URL is a reference to [StructureDefinition.url](structuredefinition-definitions.html#StructureDefinition.url).
Cardinality	1...1
Type	canonical(StructureDefinition)
Summary	True
Comments	It is up to the server and/or other infrastructure of policy to determine whether/how these claims are verified and/or updated over time. The list of profile URLs is a set.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Pattern	https://fhir.kbv.de/StructureDefinition/KBV_PR_116117_TERMINSERVICE_TVS_TERMINSYNCHRONISATION_Organization\|1.0.0
Organization.meta.security
Definition	Security labels applied to this resource. These tags connect specific resources to the overall security policy and infrastructure.
Cardinality	0...*
Type	Coding
Binding	Security Labels from the Healthcare Privacy and Security Classification System. All Security Labels (extensible)
Summary	True
Comments	The security labels can be updated without changing the stated version of the resource. The list of security labels is a set. Uniqueness is based the system/code, and version and display are ignored.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Organization.meta.tag
Definition	Tags applied to this resource. Tags are intended to be used to identify and relate resources to process and workflow, and applications are not required to consider the tags when interpreting the meaning of a resource.
Cardinality	0...*
Type	Coding
Binding	Codes that represent various types of tags, commonly workflow-related; e.g. "Needs review by Dr. Jones". CommonTags (example)
Summary	True
Comments	The tags can be updated without changing the stated version of the resource. The list of tags is a set. Uniqueness is based the system/code, and version and display are ignored.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Organization.implicitRules
Definition	A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.
Cardinality	0...1
Type	uri
Modifier	True
Summary	True
Comments	Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Organization.language
Definition	The base language in which the resource is written.
Cardinality	0...1
Type	code
Binding	A human language. CommonLanguages (preferred)
Comments	Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Organization.text
Definition	In diesem Element können die in der Instanz enthaltenen Informationen in einer menschenlesbaren Form zusammengefasst werden. Dabei ist zu beachten, dass keine Informationen aufgenommen werden dürfen, die nicht in strukturierter Form an anderer Stelle in der Instanz enthalten sind.
Cardinality	0...1
Type	Narrative
Alias	narrative, html, xhtml, display
Comments	Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	rim: Act.text?
Organization.text.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Cardinality	0...1
Type	string
Mappings	rim: n/a
Organization.text.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Cardinality	0...*
Type	Extension
Alias	extensions, user content
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Slicing	Unordered, Open, by url(Value)
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()`
Mappings	rim: n/a
Organization.text.status
Definition	The status of the narrative - whether it's entirely generated (from just the defined data or the extensions too), or whether a human authored it and it may contain additional data.
Cardinality	1...1
Type	code
Binding	The status of a resource narrative. NarrativeStatus (required)
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Fixed Value	extensions
Mappings	rim: N/A
Organization.text.div
Definition	The actual narrative content, a stripped down version of XHTML.
Cardinality	1...1
Type	xhtml
Comments	The contents of the html element are an XHTML fragment containing only the basic html formatting elements described in chapters 7-11 and 15 of the HTML 4.0 standard, <a> elements (either name or href), images and internally contained stylesheets. The XHTML content SHALL NOT contain a head, a body, external stylesheet references, scripts, forms, base/link/xlink, frames, iframes and objects.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` txt-1: The narrative SHALL contain only the basic html formatting elements and attributes described in chapters 7-11 (except section 4 of chapter 9) and 15 of the HTML 4.0 standard, <a> elements (either name or href), images and internally contained style attributes `htmlChecks()` txt-2: The narrative SHALL have some non-whitespace content `htmlChecks()`
Mappings	rim: N/A
Organization.contained
Definition	These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.
Cardinality	0...*
Type	Resource
Alias	inline resources, anonymous resources, contained resources
Comments	This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.
Mappings	rim: N/A
Organization.extension
Definition	May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Cardinality	0...*
Type	Extension
Alias	extensions, user content
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Slicing	Unordered, Open, by url(Value)
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()`
Mappings	rim: N/A
Organization.extension:ergaenzende_Angaben
Definition	Mit diesem Profil ist eine zusätzlicher Kommentar/Information definiert worden. Dieser kann an diverse Ressourcen hinzugefügt werden. Der Informationsgehalt der beinhaltenden Ressource darf nicht grundlegend verändert oder negiert werden.
Cardinality	0...1
Type	Extension(string)
Alias	extensions, user content
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()`
Mappings	rim: N/A rim: n/a
Organization.modifierExtension
Definition	May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).
Cardinality	0...*
Type	Extension
Modifier	True
Alias	extensions, user content
Requirements	Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()`
Mappings	rim: N/A
Organization.identifier
Definition	Identifier for the organization that is used to identify the organization across multiple disparate systems.
Cardinality	1...*
Type	Identifier
Must Support	True
Summary	True
Requirements	Organizations are known by a variety of ids. Some institutions maintain several, and most collect identifiers for exchange with other organizations concerning the organization.
Slicing	Unordered, Open, by type(Value)
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	w5: FiveWs.identifier v2: XON.10 / XON.3 rim: .scopes[Role](classCode=IDENT) servd: ./Identifiers
Organization.identifier:Institutionskennzeichen
Definition	An identifier - identifies some entity uniquely and unambiguously. Typically this is used for business identifiers.
Cardinality	0...*
Type	IdentifierIknr
Summary	True
Requirements	Organizations are known by a variety of ids. Some institutions maintain several, and most collect identifiers for exchange with other organizations concerning the organization.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	w5: FiveWs.identifier v2: XON.10 / XON.3 rim: .scopes[Role](classCode=IDENT) servd: ./Identifiers rim: n/a v2: CX / EI (occasionally, more often EI maps to a resource id or a URL) rim: II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd: Identifier
Organization.identifier:Institutionskennzeichen.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Cardinality	0...1
Type	string
Mappings	rim: n/a
Organization.identifier:Institutionskennzeichen.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Cardinality	0...*
Type	Extension
Alias	extensions, user content
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Slicing	Unordered, Open, by url(Value)
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()`
Mappings	rim: n/a
Organization.identifier:Institutionskennzeichen.use
Definition	The purpose of this identifier.
Cardinality	0...1
Type	code
Binding	Identifies the purpose for this identifier, if known . IdentifierUse (required)
Modifier	True
Summary	True
Requirements	Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.
Comments	Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	v2: N/A rim: Role.code or implied by context
Organization.identifier:Institutionskennzeichen.type
Definition	A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.
Cardinality	1...1
Type	CodeableConcept
Binding	A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. IdentifierTypeDeBasis (extensible)
Summary	True
Requirements	Allows users to make use of identifiers when the identifier system is not known.
Comments	This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Pattern	{ "coding": [ { "system": "http://terminology.hl7.org/CodeSystem/v2-0203", "code": "XX" } ] }
Mappings	v2: CX.5 rim: Role.code or implied by context
Organization.identifier:Institutionskennzeichen.type.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Cardinality	0...1
Type	string
Mappings	rim: n/a
Organization.identifier:Institutionskennzeichen.type.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Cardinality	0...*
Type	Extension
Alias	extensions, user content
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Slicing	Unordered, Open, by url(Value)
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()`
Mappings	rim: n/a
Organization.identifier:Institutionskennzeichen.type.coding
Definition	A reference to a code defined by a terminology system.
Cardinality	1...1
Type	Coding
Summary	True
Requirements	Allows for alternative encodings within a code system, and translations to other code systems.
Comments	Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Pattern	{ "system": "http://terminology.hl7.org/CodeSystem/v2-0203", "code": "XX" }
Mappings	v2: CE.1-8, CE.10-22 rim: union(., ./translation) orim: fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
Organization.identifier:Institutionskennzeichen.type.coding.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Cardinality	0...1
Type	string
Mappings	rim: n/a
Organization.identifier:Institutionskennzeichen.type.coding.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Cardinality	0...*
Type	Extension
Alias	extensions, user content
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Slicing	Unordered, Open, by url(Value)
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()`
Mappings	rim: n/a
Organization.identifier:Institutionskennzeichen.type.coding.system
Definition	The identification of the code system that defines the meaning of the symbol in the code.
Cardinality	1...1
Type	uri
Summary	True
Requirements	Need to be unambiguous about the source of the definition of the symbol.
Comments	The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Pattern	http://terminology.hl7.org/CodeSystem/v2-0203
Mappings	v2: CE.3 rim:* ./codeSystem orim: fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem
Organization.identifier:Institutionskennzeichen.type.coding.version
Definition	The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.
Cardinality	0...1
Type	string
Summary	True
Comments	Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	v2: CE.7 rim:* ./codeSystemVersion orim: fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion
Organization.identifier:Institutionskennzeichen.type.coding.code
Definition	A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).
Cardinality	1...1
Type	code
Summary	True
Requirements	Need to refer to a particular code in the system.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Pattern	XX
Mappings	v2: CE.1 rim:* ./code orim: fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code
Organization.identifier:Institutionskennzeichen.type.coding.display
Definition	A representation of the meaning of the code in the system, following the rules of the system.
Cardinality	0...1
Type	string
Summary	True
Requirements	Need to be able to carry a human-readable meaning of the code for readers that do not know the system.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Pattern	Organisations-ID
Mappings	v2: CE.2 - but note this is not well followed rim:* CV.displayName orim: fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName
Organization.identifier:Institutionskennzeichen.type.coding.userSelected
Definition	Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).
Cardinality	0...1
Type	boolean
Summary	True
Requirements	This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.
Comments	Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	v2: Sometimes implied by being first rim: CD.codingRationale orim: fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]
Organization.identifier:Institutionskennzeichen.type.text
Definition	A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.
Cardinality	0...1
Type	string
Summary	True
Requirements	The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.
Comments	Very often the text is the same as a displayName of one of the codings.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	v2: CE.9. But note many systems use CE.2 for this rim: ./originalText[mediaType/code="text/plain"]/data orim: fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText
Organization.identifier:Institutionskennzeichen.system
Definition	Establishes the namespace for the value - that is, a URL that describes a set values that are unique.
Cardinality	1...1
Type	uri
Summary	True
Requirements	There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.
Comments	Identifier.system is always case sensitive.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Fixed Value	http://fhir.de/sid/arge-ik/iknr
Mappings	v2: CX.4 / EI-2-4 rim: II.root or Role.id.root servd: ./IdentifierType
Organization.identifier:Institutionskennzeichen.value
Definition	The portion of the identifier typically relevant to the user and which is unique within the context of the system.
Cardinality	1...1
Type	string
Summary	True
Comments	If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ik-1: Eine IK muss 8- (ohne Prüfziffer) oder 9-stellig (mit Prüfziffer) sein `matches('[0-9]{8,9}')`
Examples	General 123456
Mappings	v2: CX.1 / EI.1 rim: II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd: ./Value
Organization.identifier:Institutionskennzeichen.period
Definition	Time period during which identifier is/was valid for use.
Cardinality	0...1
Type	Period
Summary	True
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	v2: CX.7 + CX.8 rim: Role.effectiveTime or implied by context servd: ./StartDate and ./EndDate
Organization.identifier:Institutionskennzeichen.assigner
Definition	Organization that issued/manages the identifier.
Cardinality	0...1
Type	Reference(Organization)
Summary	True
Comments	The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	v2: CX.4 / (CX.4,CX.9,CX.10) rim: II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd: ./IdentifierIssuingAuthority
Organization.identifier:Betriebsstaettennummer
Definition	Die Betriebsstättennummer der Praxis / medizinischen Einrichtung
Cardinality	1...1
Type	IdentifierBsnr
Must Support	True
Summary	True
Requirements	Organizations are known by a variety of ids. Some institutions maintain several, and most collect identifiers for exchange with other organizations concerning the organization.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	w5: FiveWs.identifier v2: XON.10 / XON.3 rim: .scopes[Role](classCode=IDENT) servd: ./Identifiers rim: n/a v2: CX / EI (occasionally, more often EI maps to a resource id or a URL) rim: II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd: Identifier
Organization.identifier:Betriebsstaettennummer.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Cardinality	0...1
Type	string
Mappings	rim: n/a
Organization.identifier:Betriebsstaettennummer.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Cardinality	0...*
Type	Extension
Alias	extensions, user content
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Slicing	Unordered, Open, by url(Value)
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()`
Mappings	rim: n/a
Organization.identifier:Betriebsstaettennummer.use
Definition	The purpose of this identifier.
Cardinality	0...1
Type	code
Binding	Identifies the purpose for this identifier, if known . IdentifierUse (required)
Modifier	True
Summary	True
Requirements	Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.
Comments	Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Fixed Value	official
Mappings	v2: N/A rim: Role.code or implied by context
Organization.identifier:Betriebsstaettennummer.type
Definition	A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.
Cardinality	1...1
Type	CodeableConcept
Binding	A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. IdentifierTypeDeBasis (extensible)
Must Support	True
Summary	True
Requirements	Allows users to make use of identifiers when the identifier system is not known.
Comments	This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Pattern	{ "coding": [ { "system": "http://terminology.hl7.org/CodeSystem/v2-0203", "code": "BSNR" } ] }
Mappings	v2: CX.5 rim: Role.code or implied by context
Organization.identifier:Betriebsstaettennummer.type.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Cardinality	0...1
Type	string
Mappings	rim: n/a
Organization.identifier:Betriebsstaettennummer.type.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Cardinality	0...*
Type	Extension
Alias	extensions, user content
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Slicing	Unordered, Open, by url(Value)
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()`
Mappings	rim: n/a
Organization.identifier:Betriebsstaettennummer.type.coding
Definition	A reference to a code defined by a terminology system.
Cardinality	1...1
Type	Coding
Must Support	True
Summary	True
Requirements	Allows for alternative encodings within a code system, and translations to other code systems.
Comments	Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Pattern	{ "system": "http://terminology.hl7.org/CodeSystem/v2-0203", "code": "BSNR" }
Mappings	v2: CE.1-8, CE.10-22 rim: union(., ./translation) orim: fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
Organization.identifier:Betriebsstaettennummer.type.coding.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Cardinality	0...1
Type	string
Mappings	rim: n/a
Organization.identifier:Betriebsstaettennummer.type.coding.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Cardinality	0...*
Type	Extension
Alias	extensions, user content
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Slicing	Unordered, Open, by url(Value)
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()`
Mappings	rim: n/a
Organization.identifier:Betriebsstaettennummer.type.coding.system
Definition	The identification of the code system that defines the meaning of the symbol in the code.
Cardinality	1...1
Type	uri
Must Support	True
Summary	True
Requirements	Need to be unambiguous about the source of the definition of the symbol.
Comments	The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Pattern	http://terminology.hl7.org/CodeSystem/v2-0203
Mappings	v2: CE.3 rim:* ./codeSystem orim: fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem
Organization.identifier:Betriebsstaettennummer.type.coding.version
Definition	The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.
Cardinality	0...1
Type	string
Must Support	True
Summary	True
Comments	Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	v2: CE.7 rim:* ./codeSystemVersion orim: fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion
Organization.identifier:Betriebsstaettennummer.type.coding.code
Definition	A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).
Cardinality	1...1
Type	code
Must Support	True
Summary	True
Requirements	Need to refer to a particular code in the system.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Pattern	BSNR
Mappings	v2: CE.1 rim:* ./code orim: fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code
Organization.identifier:Betriebsstaettennummer.type.coding.display
Definition	A representation of the meaning of the code in the system, following the rules of the system.
Cardinality	1...1
Type	string
Must Support	True
Summary	True
Requirements	Need to be able to carry a human-readable meaning of the code for readers that do not know the system.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Pattern	Primary physician office number
Mappings	v2: CE.2 - but note this is not well followed rim:* CV.displayName orim: fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName
Organization.identifier:Betriebsstaettennummer.type.coding.userSelected
Definition	Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).
Cardinality	0...1
Type	boolean
Summary	True
Requirements	This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.
Comments	Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	v2: Sometimes implied by being first rim: CD.codingRationale orim: fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]
Organization.identifier:Betriebsstaettennummer.type.text
Definition	A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.
Cardinality	0...1
Type	string
Summary	True
Requirements	The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.
Comments	Very often the text is the same as a displayName of one of the codings.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	v2: CE.9. But note many systems use CE.2 for this rim: ./originalText[mediaType/code="text/plain"]/data orim: fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText
Organization.identifier:Betriebsstaettennummer.system
Definition	Establishes the namespace for the value - that is, a URL that describes a set values that are unique.
Cardinality	1...1
Type	uri
Must Support	True
Summary	True
Requirements	There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.
Comments	Identifier.system is always case sensitive.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Fixed Value	https://fhir.kbv.de/NamingSystem/KBV_NS_Base_BSNR
Mappings	v2: CX.4 / EI-2-4 rim: II.root or Role.id.root servd: ./IdentifierType
Organization.identifier:Betriebsstaettennummer.value
Definition	The portion of the identifier typically relevant to the user and which is unique within the context of the system.
Cardinality	1...1
Type	string
Must Support	True
Summary	True
Comments	If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` bsnr-1: Eine BSNR muss 9-stellig numerisch sein `matches('^[0-9]{9}$')`
Examples	General 123456
Mappings	v2: CX.1 / EI.1 rim: II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd: ./Value
Organization.identifier:Betriebsstaettennummer.period
Definition	Time period during which identifier is/was valid for use.
Cardinality	0...1
Type	Period
Summary	True
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	v2: CX.7 + CX.8 rim: Role.effectiveTime or implied by context servd: ./StartDate and ./EndDate
Organization.identifier:Betriebsstaettennummer.assigner
Definition	Organization that issued/manages the identifier.
Cardinality	0...1
Type	Reference(Organization)
Summary	True
Comments	The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	v2: CX.4 / (CX.4,CX.9,CX.10) rim: II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd: ./IdentifierIssuingAuthority
Organization.identifier:Betriebsstaettennummer.assigner.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Cardinality	0...1
Type	string
Mappings	rim: n/a
Organization.identifier:Betriebsstaettennummer.assigner.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Cardinality	0...*
Type	Extension
Alias	extensions, user content
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Slicing	Unordered, Open, by url(Value)
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()`
Mappings	rim: n/a
Organization.identifier:Betriebsstaettennummer.assigner.reference
Definition	A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.
Cardinality	0...1
Type	string
Summary	True
Comments	Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	rim: N/A
Organization.identifier:Betriebsstaettennummer.assigner.type
Definition	The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent. The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).
Cardinality	0...1
Type	uri
Binding	Aa resource (or, for logical models, the URI of the logical model). ResourceType (extensible)
Summary	True
Comments	This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	rim: N/A
Organization.identifier:Betriebsstaettennummer.assigner.identifier
Definition	An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.
Cardinality	0...1
Type	Identifier
Summary	True
Comments	When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it. Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation\|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	rim: .identifier
Organization.identifier:Betriebsstaettennummer.assigner.identifier.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Cardinality	0...1
Type	string
Mappings	rim: n/a
Organization.identifier:Betriebsstaettennummer.assigner.identifier.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Cardinality	0...*
Type	Extension
Alias	extensions, user content
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Slicing	Unordered, Open, by url(Value)
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()`
Mappings	rim: n/a
Organization.identifier:Betriebsstaettennummer.assigner.identifier.use
Definition	The purpose of this identifier.
Cardinality	0...1
Type	code
Binding	Identifies the purpose for this identifier, if known . IdentifierUse (required)
Modifier	True
Summary	True
Requirements	Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.
Comments	Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	v2: N/A rim: Role.code or implied by context
Organization.identifier:Betriebsstaettennummer.assigner.identifier.type
Definition	A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.
Cardinality	0...1
Type	CodeableConcept
Binding	A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible)
Summary	True
Requirements	Allows users to make use of identifiers when the identifier system is not known.
Comments	This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	v2: CX.5 rim: Role.code or implied by context
Organization.identifier:Betriebsstaettennummer.assigner.identifier.system
Definition	Establishes the namespace for the value - that is, a URL that describes a set values that are unique.
Cardinality	1...1
Type	uri
Summary	True
Requirements	There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.
Comments	Identifier.system is always case sensitive.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Fixed Value	http://fhir.de/sid/arge-ik/iknr
Mappings	v2: CX.4 / EI-2-4 rim: II.root or Role.id.root servd: ./IdentifierType
Organization.identifier:Betriebsstaettennummer.assigner.identifier.value
Definition	The portion of the identifier typically relevant to the user and which is unique within the context of the system.
Cardinality	1...1
Type	string
Summary	True
Comments	If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` bsnr-1: Eine BSNR muss neunstellig numerisch sein `matches('[0-9]{9}')`
Examples	General 123456
Mappings	v2: CX.1 / EI.1 rim: II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd: ./Value
Organization.identifier:Betriebsstaettennummer.assigner.identifier.period
Definition	Time period during which identifier is/was valid for use.
Cardinality	0...1
Type	Period
Summary	True
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	v2: CX.7 + CX.8 rim: Role.effectiveTime or implied by context servd: ./StartDate and ./EndDate
Organization.identifier:Betriebsstaettennummer.assigner.identifier.assigner
Definition	Organization that issued/manages the identifier.
Cardinality	0...1
Type	Reference(Organization)
Summary	True
Comments	The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	v2: CX.4 / (CX.4,CX.9,CX.10) rim: II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd: ./IdentifierIssuingAuthority
Organization.identifier:Betriebsstaettennummer.assigner.display
Definition	Plain text narrative that identifies the resource in addition to the resource reference.
Cardinality	1...1
Type	string
Summary	True
Comments	This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	rim: N/A
Organization.identifier:VKNR
Definition	An identifier - identifies some entity uniquely and unambiguously. Typically this is used for business identifiers.
Cardinality	0...*
Type	IdentifierVknr
Summary	True
Requirements	Organizations are known by a variety of ids. Some institutions maintain several, and most collect identifiers for exchange with other organizations concerning the organization.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	w5: FiveWs.identifier v2: XON.10 / XON.3 rim: .scopes[Role](classCode=IDENT) servd: ./Identifiers rim: n/a v2: CX / EI (occasionally, more often EI maps to a resource id or a URL) rim: II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd: Identifier
Organization.identifier:VKNR.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Cardinality	0...1
Type	string
Mappings	rim: n/a
Organization.identifier:VKNR.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Cardinality	0...*
Type	Extension
Alias	extensions, user content
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Slicing	Unordered, Open, by url(Value)
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()`
Mappings	rim: n/a
Organization.identifier:VKNR.use
Definition	The purpose of this identifier.
Cardinality	0...1
Type	code
Binding	Identifies the purpose for this identifier, if known . IdentifierUse (required)
Modifier	True
Summary	True
Requirements	Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.
Comments	Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Fixed Value	official
Mappings	v2: N/A rim: Role.code or implied by context
Organization.identifier:VKNR.type
Definition	A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.
Cardinality	1...1
Type	CodeableConcept
Binding	A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. IdentifierTypeDeBasis (extensible)
Summary	True
Requirements	Allows users to make use of identifiers when the identifier system is not known.
Comments	This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Pattern	{ "coding": [ { "system": "http://terminology.hl7.org/CodeSystem/v2-0203", "code": "NIIP" } ] }
Mappings	v2: CX.5 rim: Role.code or implied by context
Organization.identifier:VKNR.type.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Cardinality	0...1
Type	string
Mappings	rim: n/a
Organization.identifier:VKNR.type.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Cardinality	0...*
Type	Extension
Alias	extensions, user content
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Slicing	Unordered, Open, by url(Value)
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()`
Mappings	rim: n/a
Organization.identifier:VKNR.type.coding
Definition	A reference to a code defined by a terminology system.
Cardinality	1...1
Type	Coding
Summary	True
Requirements	Allows for alternative encodings within a code system, and translations to other code systems.
Comments	Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Pattern	{ "system": "http://terminology.hl7.org/CodeSystem/v2-0203", "code": "NIIP" }
Mappings	v2: CE.1-8, CE.10-22 rim: union(., ./translation) orim: fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
Organization.identifier:VKNR.type.coding.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Cardinality	0...1
Type	string
Mappings	rim: n/a
Organization.identifier:VKNR.type.coding.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Cardinality	0...*
Type	Extension
Alias	extensions, user content
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Slicing	Unordered, Open, by url(Value)
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()`
Mappings	rim: n/a
Organization.identifier:VKNR.type.coding.system
Definition	The identification of the code system that defines the meaning of the symbol in the code.
Cardinality	1...1
Type	uri
Summary	True
Requirements	Need to be unambiguous about the source of the definition of the symbol.
Comments	The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Pattern	http://terminology.hl7.org/CodeSystem/v2-0203
Mappings	v2: CE.3 rim:* ./codeSystem orim: fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem
Organization.identifier:VKNR.type.coding.version
Definition	The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.
Cardinality	0...1
Type	string
Summary	True
Comments	Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	v2: CE.7 rim:* ./codeSystemVersion orim: fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion
Organization.identifier:VKNR.type.coding.code
Definition	A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).
Cardinality	1...1
Type	code
Summary	True
Requirements	Need to refer to a particular code in the system.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Pattern	NIIP
Mappings	v2: CE.1 rim:* ./code orim: fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code
Organization.identifier:VKNR.type.coding.display
Definition	A representation of the meaning of the code in the system, following the rules of the system.
Cardinality	0...1
Type	string
Summary	True
Requirements	Need to be able to carry a human-readable meaning of the code for readers that do not know the system.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Pattern	National Insurance Payor Identifier (Payor)
Mappings	v2: CE.2 - but note this is not well followed rim:* CV.displayName orim: fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName
Organization.identifier:VKNR.type.coding.userSelected
Definition	Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).
Cardinality	0...1
Type	boolean
Summary	True
Requirements	This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.
Comments	Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	v2: Sometimes implied by being first rim: CD.codingRationale orim: fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]
Organization.identifier:VKNR.type.text
Definition	A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.
Cardinality	0...1
Type	string
Summary	True
Requirements	The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.
Comments	Very often the text is the same as a displayName of one of the codings.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	v2: CE.9. But note many systems use CE.2 for this rim: ./originalText[mediaType/code="text/plain"]/data orim: fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText
Organization.identifier:VKNR.system
Definition	Establishes the namespace for the value - that is, a URL that describes a set values that are unique.
Cardinality	1...1
Type	uri
Summary	True
Requirements	There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.
Comments	Identifier.system is always case sensitive.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Fixed Value	http://fhir.de/sid/kbv/vknr
Mappings	v2: CX.4 / EI-2-4 rim: II.root or Role.id.root servd: ./IdentifierType
Organization.identifier:VKNR.value
Definition	The portion of the identifier typically relevant to the user and which is unique within the context of the system.
Cardinality	1...1
Type	string
Summary	True
Comments	If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Examples	General 123456
Mappings	v2: CX.1 / EI.1 rim: II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd: ./Value
Organization.identifier:VKNR.period
Definition	Time period during which identifier is/was valid for use.
Cardinality	0...1
Type	Period
Summary	True
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	v2: CX.7 + CX.8 rim: Role.effectiveTime or implied by context servd: ./StartDate and ./EndDate
Organization.identifier:VKNR.assigner
Definition	Organization that issued/manages the identifier.
Cardinality	0...1
Type	Reference(Organization)
Summary	True
Comments	The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	v2: CX.4 / (CX.4,CX.9,CX.10) rim: II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd: ./IdentifierIssuingAuthority
Organization.identifier:VKNR.assigner.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Cardinality	0...1
Type	string
Mappings	rim: n/a
Organization.identifier:VKNR.assigner.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Cardinality	0...*
Type	Extension
Alias	extensions, user content
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Slicing	Unordered, Open, by url(Value)
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()`
Mappings	rim: n/a
Organization.identifier:VKNR.assigner.reference
Definition	A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.
Cardinality	0...1
Type	string
Summary	True
Comments	Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	rim: N/A
Organization.identifier:VKNR.assigner.type
Definition	The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent. The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).
Cardinality	0...1
Type	uri
Binding	Aa resource (or, for logical models, the URI of the logical model). ResourceType (extensible)
Summary	True
Comments	This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	rim: N/A
Organization.identifier:VKNR.assigner.identifier
Definition	An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.
Cardinality	0...1
Type	Identifier
Summary	True
Comments	When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it. Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation\|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	rim: .identifier
Organization.identifier:VKNR.assigner.identifier.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Cardinality	0...1
Type	string
Mappings	rim: n/a
Organization.identifier:VKNR.assigner.identifier.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Cardinality	0...*
Type	Extension
Alias	extensions, user content
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Slicing	Unordered, Open, by url(Value)
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()`
Mappings	rim: n/a
Organization.identifier:VKNR.assigner.identifier.use
Definition	The purpose of this identifier.
Cardinality	0...1
Type	code
Binding	Identifies the purpose for this identifier, if known . IdentifierUse (required)
Modifier	True
Summary	True
Requirements	Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.
Comments	Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	v2: N/A rim: Role.code or implied by context
Organization.identifier:VKNR.assigner.identifier.type
Definition	A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.
Cardinality	0...1
Type	CodeableConcept
Binding	A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible)
Summary	True
Requirements	Allows users to make use of identifiers when the identifier system is not known.
Comments	This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	v2: CX.5 rim: Role.code or implied by context
Organization.identifier:VKNR.assigner.identifier.system
Definition	Establishes the namespace for the value - that is, a URL that describes a set values that are unique.
Cardinality	1...1
Type	uri
Summary	True
Requirements	There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.
Comments	Identifier.system is always case sensitive.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Fixed Value	http://fhir.de/sid/arge-ik/iknr
Mappings	v2: CX.4 / EI-2-4 rim: II.root or Role.id.root servd: ./IdentifierType
Organization.identifier:VKNR.assigner.identifier.value
Definition	The portion of the identifier typically relevant to the user and which is unique within the context of the system.
Cardinality	1...1
Type	string
Summary	True
Comments	If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Examples	General 123456
Mappings	v2: CX.1 / EI.1 rim: II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd: ./Value
Organization.identifier:VKNR.assigner.identifier.period
Definition	Time period during which identifier is/was valid for use.
Cardinality	0...1
Type	Period
Summary	True
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	v2: CX.7 + CX.8 rim: Role.effectiveTime or implied by context servd: ./StartDate and ./EndDate
Organization.identifier:VKNR.assigner.identifier.assigner
Definition	Organization that issued/manages the identifier.
Cardinality	0...1
Type	Reference(Organization)
Summary	True
Comments	The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	v2: CX.4 / (CX.4,CX.9,CX.10) rim: II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd: ./IdentifierIssuingAuthority
Organization.identifier:VKNR.assigner.display
Definition	Plain text narrative that identifies the resource in addition to the resource reference.
Cardinality	1...1
Type	string
Summary	True
Comments	This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	rim: N/A
Organization.identifier:KZV-Abrechnungsnummer
Definition	An identifier - identifies some entity uniquely and unambiguously. Typically this is used for business identifiers.
Cardinality	0...1
Type	IdentifierKzva
Summary	True
Requirements	Organizations are known by a variety of ids. Some institutions maintain several, and most collect identifiers for exchange with other organizations concerning the organization.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	w5: FiveWs.identifier v2: XON.10 / XON.3 rim: .scopes[Role](classCode=IDENT) servd: ./Identifiers rim: n/a v2: CX / EI (occasionally, more often EI maps to a resource id or a URL) rim: II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd: Identifier
Organization.identifier:KZV-Abrechnungsnummer.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Cardinality	0...1
Type	string
Mappings	rim: n/a
Organization.identifier:KZV-Abrechnungsnummer.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Cardinality	0...*
Type	Extension
Alias	extensions, user content
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Slicing	Unordered, Open, by url(Value)
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()`
Mappings	rim: n/a
Organization.identifier:KZV-Abrechnungsnummer.use
Definition	The purpose of this identifier.
Cardinality	0...1
Type	code
Binding	Identifies the purpose for this identifier, if known . IdentifierUse (required)
Modifier	True
Summary	True
Requirements	Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.
Comments	Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Fixed Value	official
Mappings	v2: N/A rim: Role.code or implied by context
Organization.identifier:KZV-Abrechnungsnummer.type
Definition	A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.
Cardinality	1...1
Type	CodeableConcept
Binding	A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. IdentifierTypeDeBasis (extensible)
Summary	True
Requirements	Allows users to make use of identifiers when the identifier system is not known.
Comments	This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Pattern	{ "coding": [ { "system": "http://fhir.de/CodeSystem/identifier-type-de-basis", "code": "KZVA" } ] }
Mappings	v2: CX.5 rim: Role.code or implied by context
Organization.identifier:KZV-Abrechnungsnummer.type.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Cardinality	0...1
Type	string
Mappings	rim: n/a
Organization.identifier:KZV-Abrechnungsnummer.type.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Cardinality	0...*
Type	Extension
Alias	extensions, user content
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Slicing	Unordered, Open, by url(Value)
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()`
Mappings	rim: n/a
Organization.identifier:KZV-Abrechnungsnummer.type.coding
Definition	A reference to a code defined by a terminology system.
Cardinality	1...1
Type	Coding
Summary	True
Requirements	Allows for alternative encodings within a code system, and translations to other code systems.
Comments	Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Pattern	{ "system": "http://fhir.de/CodeSystem/identifier-type-de-basis", "code": "KZVA" }
Mappings	v2: CE.1-8, CE.10-22 rim: union(., ./translation) orim: fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
Organization.identifier:KZV-Abrechnungsnummer.type.coding.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Cardinality	0...1
Type	string
Mappings	rim: n/a
Organization.identifier:KZV-Abrechnungsnummer.type.coding.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Cardinality	0...*
Type	Extension
Alias	extensions, user content
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Slicing	Unordered, Open, by url(Value)
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()`
Mappings	rim: n/a
Organization.identifier:KZV-Abrechnungsnummer.type.coding.system
Definition	The identification of the code system that defines the meaning of the symbol in the code.
Cardinality	1...1
Type	uri
Summary	True
Requirements	Need to be unambiguous about the source of the definition of the symbol.
Comments	The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Pattern	http://fhir.de/CodeSystem/identifier-type-de-basis
Mappings	v2: CE.3 rim:* ./codeSystem orim: fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem
Organization.identifier:KZV-Abrechnungsnummer.type.coding.version
Definition	The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.
Cardinality	0...1
Type	string
Summary	True
Comments	Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	v2: CE.7 rim:* ./codeSystemVersion orim: fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion
Organization.identifier:KZV-Abrechnungsnummer.type.coding.code
Definition	A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).
Cardinality	1...1
Type	code
Summary	True
Requirements	Need to refer to a particular code in the system.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Pattern	KZVA
Mappings	v2: CE.1 rim:* ./code orim: fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code
Organization.identifier:KZV-Abrechnungsnummer.type.coding.display
Definition	A representation of the meaning of the code in the system, following the rules of the system.
Cardinality	0...1
Type	string
Summary	True
Requirements	Need to be able to carry a human-readable meaning of the code for readers that do not know the system.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Pattern	KZVAbrechnungsnummer
Mappings	v2: CE.2 - but note this is not well followed rim:* CV.displayName orim: fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName
Organization.identifier:KZV-Abrechnungsnummer.type.coding.userSelected
Definition	Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).
Cardinality	0...1
Type	boolean
Summary	True
Requirements	This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.
Comments	Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	v2: Sometimes implied by being first rim: CD.codingRationale orim: fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]
Organization.identifier:KZV-Abrechnungsnummer.type.text
Definition	A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.
Cardinality	0...1
Type	string
Summary	True
Requirements	The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.
Comments	Very often the text is the same as a displayName of one of the codings.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	v2: CE.9. But note many systems use CE.2 for this rim: ./originalText[mediaType/code="text/plain"]/data orim: fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText
Organization.identifier:KZV-Abrechnungsnummer.system
Definition	Establishes the namespace for the value - that is, a URL that describes a set values that are unique.
Cardinality	1...1
Type	uri
Summary	True
Requirements	There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.
Comments	Identifier.system is always case sensitive.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Fixed Value	http://fhir.de/sid/kzbv/kzvabrechnungsnummer
Mappings	v2: CX.4 / EI-2-4 rim: II.root or Role.id.root servd: ./IdentifierType
Organization.identifier:KZV-Abrechnungsnummer.value
Definition	The portion of the identifier typically relevant to the user and which is unique within the context of the system.
Cardinality	1...1
Type	string
Summary	True
Comments	If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` kzva-1: Die KZVAbrechnungsnummer muss 9-stellig numerisch sein `matches('[0-9]{9}')`
Examples	General 123456
Mappings	v2: CX.1 / EI.1 rim: II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd: ./Value
Organization.identifier:KZV-Abrechnungsnummer.period
Definition	Time period during which identifier is/was valid for use.
Cardinality	0...1
Type	Period
Summary	True
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	v2: CX.7 + CX.8 rim: Role.effectiveTime or implied by context servd: ./StartDate and ./EndDate
Organization.identifier:KZV-Abrechnungsnummer.assigner
Definition	Organization that issued/manages the identifier.
Cardinality	0...1
Type	Reference(Organization)
Summary	True
Comments	The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	v2: CX.4 / (CX.4,CX.9,CX.10) rim: II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd: ./IdentifierIssuingAuthority
Organization.identifier:KZV-Abrechnungsnummer.assigner.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Cardinality	0...1
Type	string
Mappings	rim: n/a
Organization.identifier:KZV-Abrechnungsnummer.assigner.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Cardinality	0...*
Type	Extension
Alias	extensions, user content
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Slicing	Unordered, Open, by url(Value)
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()`
Mappings	rim: n/a
Organization.identifier:KZV-Abrechnungsnummer.assigner.reference
Definition	A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.
Cardinality	0...1
Type	string
Summary	True
Comments	Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	rim: N/A
Organization.identifier:KZV-Abrechnungsnummer.assigner.type
Definition	The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent. The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).
Cardinality	0...1
Type	uri
Binding	Aa resource (or, for logical models, the URI of the logical model). ResourceType (extensible)
Summary	True
Comments	This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	rim: N/A
Organization.identifier:KZV-Abrechnungsnummer.assigner.identifier
Definition	An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.
Cardinality	0...1
Type	Identifier
Summary	True
Comments	When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it. Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation\|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	rim: .identifier
Organization.identifier:KZV-Abrechnungsnummer.assigner.identifier.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Cardinality	0...1
Type	string
Mappings	rim: n/a
Organization.identifier:KZV-Abrechnungsnummer.assigner.identifier.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Cardinality	0...*
Type	Extension
Alias	extensions, user content
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Slicing	Unordered, Open, by url(Value)
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()`
Mappings	rim: n/a
Organization.identifier:KZV-Abrechnungsnummer.assigner.identifier.use
Definition	The purpose of this identifier.
Cardinality	0...1
Type	code
Binding	Identifies the purpose for this identifier, if known . IdentifierUse (required)
Modifier	True
Summary	True
Requirements	Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.
Comments	Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	v2: N/A rim: Role.code or implied by context
Organization.identifier:KZV-Abrechnungsnummer.assigner.identifier.type
Definition	A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.
Cardinality	0...1
Type	CodeableConcept
Binding	A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible)
Summary	True
Requirements	Allows users to make use of identifiers when the identifier system is not known.
Comments	This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	v2: CX.5 rim: Role.code or implied by context
Organization.identifier:KZV-Abrechnungsnummer.assigner.identifier.system
Definition	Establishes the namespace for the value - that is, a URL that describes a set values that are unique.
Cardinality	1...1
Type	uri
Summary	True
Requirements	There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.
Comments	Identifier.system is always case sensitive.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Fixed Value	http://fhir.de/sid/arge-ik/iknr
Mappings	v2: CX.4 / EI-2-4 rim: II.root or Role.id.root servd: ./IdentifierType
Organization.identifier:KZV-Abrechnungsnummer.assigner.identifier.value
Definition	The portion of the identifier typically relevant to the user and which is unique within the context of the system.
Cardinality	1...1
Type	string
Summary	True
Comments	If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Examples	General 123456
Mappings	v2: CX.1 / EI.1 rim: II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd: ./Value
Organization.identifier:KZV-Abrechnungsnummer.assigner.identifier.period
Definition	Time period during which identifier is/was valid for use.
Cardinality	0...1
Type	Period
Summary	True
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	v2: CX.7 + CX.8 rim: Role.effectiveTime or implied by context servd: ./StartDate and ./EndDate
Organization.identifier:KZV-Abrechnungsnummer.assigner.identifier.assigner
Definition	Organization that issued/manages the identifier.
Cardinality	0...1
Type	Reference(Organization)
Summary	True
Comments	The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	v2: CX.4 / (CX.4,CX.9,CX.10) rim: II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd: ./IdentifierIssuingAuthority
Organization.identifier:KZV-Abrechnungsnummer.assigner.display
Definition	Plain text narrative that identifies the resource in addition to the resource reference.
Cardinality	1...1
Type	string
Summary	True
Comments	This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	rim: N/A
Organization.identifier:Telematik-ID
Definition	An identifier - identifies some entity uniquely and unambiguously. Typically this is used for business identifiers.
Cardinality	0...*
Type	IdentifierTelematikId
Summary	True
Requirements	Organizations are known by a variety of ids. Some institutions maintain several, and most collect identifiers for exchange with other organizations concerning the organization.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	w5: FiveWs.identifier v2: XON.10 / XON.3 rim: .scopes[Role](classCode=IDENT) servd: ./Identifiers rim: n/a v2: CX / EI (occasionally, more often EI maps to a resource id or a URL) rim: II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd: Identifier
Organization.identifier:Telematik-ID.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Cardinality	0...1
Type	string
Mappings	rim: n/a
Organization.identifier:Telematik-ID.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Cardinality	0...*
Type	Extension
Alias	extensions, user content
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Slicing	Unordered, Open, by url(Value)
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()`
Mappings	rim: n/a
Organization.identifier:Telematik-ID.use
Definition	The purpose of this identifier.
Cardinality	0...1
Type	code
Binding	Identifies the purpose for this identifier, if known . IdentifierUse (required)
Modifier	True
Summary	True
Requirements	Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.
Comments	Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	v2: N/A rim: Role.code or implied by context
Organization.identifier:Telematik-ID.type
Definition	A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.
Cardinality	1...1
Type	CodeableConcept
Binding	A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. IdentifierTypeDeBasis (extensible)
Summary	True
Requirements	Allows users to make use of identifiers when the identifier system is not known.
Comments	This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Pattern	{ "coding": [ { "system": "http://terminology.hl7.org/CodeSystem/v2-0203", "code": "PRN" } ] }
Mappings	v2: CX.5 rim: Role.code or implied by context
Organization.identifier:Telematik-ID.type.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Cardinality	0...1
Type	string
Mappings	rim: n/a
Organization.identifier:Telematik-ID.type.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Cardinality	0...*
Type	Extension
Alias	extensions, user content
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Slicing	Unordered, Open, by url(Value)
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()`
Mappings	rim: n/a
Organization.identifier:Telematik-ID.type.coding
Definition	A reference to a code defined by a terminology system.
Cardinality	1...1
Type	Coding
Summary	True
Requirements	Allows for alternative encodings within a code system, and translations to other code systems.
Comments	Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Pattern	{ "system": "http://terminology.hl7.org/CodeSystem/v2-0203", "code": "PRN" }
Mappings	v2: CE.1-8, CE.10-22 rim: union(., ./translation) orim: fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
Organization.identifier:Telematik-ID.type.coding.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Cardinality	0...1
Type	string
Mappings	rim: n/a
Organization.identifier:Telematik-ID.type.coding.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Cardinality	0...*
Type	Extension
Alias	extensions, user content
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Slicing	Unordered, Open, by url(Value)
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()`
Mappings	rim: n/a
Organization.identifier:Telematik-ID.type.coding.system
Definition	The identification of the code system that defines the meaning of the symbol in the code.
Cardinality	1...1
Type	uri
Summary	True
Requirements	Need to be unambiguous about the source of the definition of the symbol.
Comments	The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Pattern	http://terminology.hl7.org/CodeSystem/v2-0203
Mappings	v2: CE.3 rim:* ./codeSystem orim: fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem
Organization.identifier:Telematik-ID.type.coding.version
Definition	The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.
Cardinality	0...1
Type	string
Summary	True
Comments	Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	v2: CE.7 rim:* ./codeSystemVersion orim: fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion
Organization.identifier:Telematik-ID.type.coding.code
Definition	A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).
Cardinality	1...1
Type	code
Summary	True
Requirements	Need to refer to a particular code in the system.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Pattern	PRN
Mappings	v2: CE.1 rim:* ./code orim: fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code
Organization.identifier:Telematik-ID.type.coding.display
Definition	A representation of the meaning of the code in the system, following the rules of the system.
Cardinality	0...1
Type	string
Summary	True
Requirements	Need to be able to carry a human-readable meaning of the code for readers that do not know the system.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Pattern	Provider number
Mappings	v2: CE.2 - but note this is not well followed rim:* CV.displayName orim: fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName
Organization.identifier:Telematik-ID.type.coding.userSelected
Definition	Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).
Cardinality	0...1
Type	boolean
Summary	True
Requirements	This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.
Comments	Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	v2: Sometimes implied by being first rim: CD.codingRationale orim: fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]
Organization.identifier:Telematik-ID.type.text
Definition	A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.
Cardinality	0...1
Type	string
Summary	True
Requirements	The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.
Comments	Very often the text is the same as a displayName of one of the codings.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	v2: CE.9. But note many systems use CE.2 for this rim: ./originalText[mediaType/code="text/plain"]/data orim: fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText
Organization.identifier:Telematik-ID.system
Definition	Establishes the namespace for the value - that is, a URL that describes a set values that are unique.
Cardinality	1...1
Type	uri
Summary	True
Requirements	There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.
Comments	Identifier.system is always case sensitive.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Fixed Value	https://gematik.de/fhir/sid/telematik-id
Mappings	v2: CX.4 / EI-2-4 rim: II.root or Role.id.root servd: ./IdentifierType
Organization.identifier:Telematik-ID.value
Definition	The portion of the identifier typically relevant to the user and which is unique within the context of the system.
Cardinality	1...1
Type	string
Summary	True
Comments	If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Examples	General 123456
Mappings	v2: CX.1 / EI.1 rim: II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd: ./Value
Organization.identifier:Telematik-ID.period
Definition	Time period during which identifier is/was valid for use.
Cardinality	0...1
Type	Period
Summary	True
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	v2: CX.7 + CX.8 rim: Role.effectiveTime or implied by context servd: ./StartDate and ./EndDate
Organization.identifier:Telematik-ID.assigner
Definition	Organization that issued/manages the identifier.
Cardinality	0...1
Type	Reference(Organization)
Summary	True
Comments	The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	v2: CX.4 / (CX.4,CX.9,CX.10) rim: II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd: ./IdentifierIssuingAuthority
Organization.active
Definition	Whether the organization's record is still in active use.
Cardinality	0...1
Type	boolean
Modifier	True
Summary	True
Requirements	Need a flag to indicate a record is no longer to be used and should generally be hidden for the user in the UI.
Comments	This active flag is not intended to be used to mark an organization as temporarily closed or under construction. Instead the Location(s) within the Organization should have the suspended status. If further details of the reason for the suspension are required, then an extension on this element should be used. This element is labeled as a modifier because it may be used to mark that the resource was created in error.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	w5: FiveWs.status v2: No equivalent in HL7 v2 rim: .status servd: ./Status (however this concept in ServD more covers why the organization is active or not, could be delisted, deregistered, not operational yet) this could alternatively be derived from ./StartDate and ./EndDate and given a context date.
Organization.type
Definition	The kind(s) of organization that this is.
Cardinality	0...*
Type	CodeableConcept
Binding	Used to categorize the organization. OrganizationType (example)
Summary	True
Requirements	Need to be able to track the kind of organization that this is - different organization types have different uses.
Comments	Organizations can be corporations, wards, sections, clinical teams, government departments, etc. Note that code is generally a classifier of the type of organization; in many applications, codes are used to identity a particular organization (say, ward) as opposed to another of the same type - these are identifiers, not codes When considering if multiple types are appropriate, you should evaluate if child organizations would be a more appropriate use of the concept, as different types likely are in different sub-areas of the organization. This is most likely to be used where type values have orthogonal values, such as a religious, academic and medical center. We expect that some jurisdictions will profile this optionality to be a single cardinality.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	w5: FiveWs.class v2: No equivalent in v2 rim: .code servd: n/a
Organization.type.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Cardinality	0...1
Type	string
Mappings	rim: n/a
Organization.type.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Cardinality	0...*
Type	Extension
Alias	extensions, user content
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Slicing	Unordered, Open, by url(Value)
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()`
Mappings	rim: n/a
Organization.type.coding
Definition	A reference to a code defined by a terminology system.
Cardinality	0...*
Type	Coding
Summary	True
Requirements	Allows for alternative encodings within a code system, and translations to other code systems.
Comments	Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.
Slicing	Unordered, Open, by $this(Value)
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	v2: CE.1-8, CE.10-22 rim: union(., ./translation) orim: fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
Organization.type.coding:IHE-Code
Definition	Hier kann der Typus der Einrichtung anhand eines Codes aus dem Codesystem IHE Deutschland e.V. angegeben werden.
Cardinality	0...1
Type	Coding
Binding	IHEXDShealthcareFacilityTypeCode (required)
Summary	True
Requirements	Allows for alternative encodings within a code system, and translations to other code systems.
Comments	Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	v2: CE.1-8, CE.10-22 rim: union(., ./translation) orim: fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
Organization.type.coding:IHE-Code.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Cardinality	0...1
Type	string
Mappings	rim: n/a
Organization.type.coding:IHE-Code.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Cardinality	0...*
Type	Extension
Alias	extensions, user content
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Slicing	Unordered, Open, by url(Value)
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()`
Mappings	rim: n/a
Organization.type.coding:IHE-Code.system
Definition	The identification of the code system that defines the meaning of the symbol in the code.
Cardinality	1...1
Type	uri
Summary	True
Requirements	Need to be unambiguous about the source of the definition of the symbol.
Comments	The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	v2: CE.3 rim:* ./codeSystem orim: fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem
Organization.type.coding:IHE-Code.version
Definition	The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.
Cardinality	1...1
Type	string
Summary	True
Comments	Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	v2: CE.7 rim:* ./codeSystemVersion orim: fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion
Organization.type.coding:IHE-Code.code
Definition	A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).
Cardinality	1...1
Type	code
Summary	True
Requirements	Need to refer to a particular code in the system.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	v2: CE.1 rim:* ./code orim: fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code
Organization.type.coding:IHE-Code.display
Definition	A representation of the meaning of the code in the system, following the rules of the system.
Cardinality	1...1
Type	string
Summary	True
Requirements	Need to be able to carry a human-readable meaning of the code for readers that do not know the system.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	v2: CE.2 - but note this is not well followed rim:* CV.displayName orim: fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName
Organization.type.coding:IHE-Code.userSelected
Definition	Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).
Cardinality	0...1
Type	boolean
Summary	True
Requirements	This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.
Comments	Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	v2: Sometimes implied by being first rim: CD.codingRationale orim: fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]
Organization.type.coding:HL7-Fachschluesselgruppe
Definition	Hier wird die Fachrichtung/Fachabteilung anhand eines Codes aus dem Codesystem "Fachabteilungsschlüssel" der HL7 Basis Deutschland angegeben.
Cardinality	0...1
Type	Coding
Binding	FachabteilungsschluesselVS (required)
Summary	True
Requirements	Allows for alternative encodings within a code system, and translations to other code systems.
Comments	Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	v2: CE.1-8, CE.10-22 rim: union(., ./translation) orim: fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
Organization.type.coding:HL7-Fachschluesselgruppe.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Cardinality	0...1
Type	string
Mappings	rim: n/a
Organization.type.coding:HL7-Fachschluesselgruppe.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Cardinality	0...*
Type	Extension
Alias	extensions, user content
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Slicing	Unordered, Open, by url(Value)
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()`
Mappings	rim: n/a
Organization.type.coding:HL7-Fachschluesselgruppe.system
Definition	The identification of the code system that defines the meaning of the symbol in the code.
Cardinality	1...1
Type	uri
Summary	True
Requirements	Need to be unambiguous about the source of the definition of the symbol.
Comments	The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	v2: CE.3 rim:* ./codeSystem orim: fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem
Organization.type.coding:HL7-Fachschluesselgruppe.version
Definition	The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.
Cardinality	1...1
Type	string
Summary	True
Comments	Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	v2: CE.7 rim:* ./codeSystemVersion orim: fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion
Organization.type.coding:HL7-Fachschluesselgruppe.code
Definition	A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).
Cardinality	1...1
Type	code
Summary	True
Requirements	Need to refer to a particular code in the system.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	v2: CE.1 rim:* ./code orim: fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code
Organization.type.coding:HL7-Fachschluesselgruppe.display
Definition	A representation of the meaning of the code in the system, following the rules of the system.
Cardinality	1...1
Type	string
Summary	True
Requirements	Need to be able to carry a human-readable meaning of the code for readers that do not know the system.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	v2: CE.2 - but note this is not well followed rim:* CV.displayName orim: fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName
Organization.type.coding:HL7-Fachschluesselgruppe.userSelected
Definition	Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).
Cardinality	0...1
Type	boolean
Summary	True
Requirements	This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.
Comments	Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	v2: Sometimes implied by being first rim: CD.codingRationale orim: fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]
Organization.type.coding:HL7-Fachschluesselgruppe-erweitert
Definition	Hier wird die Fachrichtung/Fachabteilung anhand eines Codes aus dem Codesystem "FachabteilungsschlüsselErweitert" der HL7 Basis Deutschland angegeben.
Cardinality	0...1
Type	Coding
Binding	ValueSetFachabteilungsschluesselErweitert (required)
Summary	True
Requirements	Allows for alternative encodings within a code system, and translations to other code systems.
Comments	Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	v2: CE.1-8, CE.10-22 rim: union(., ./translation) orim: fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
Organization.type.coding:HL7-Fachschluesselgruppe-erweitert.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Cardinality	0...1
Type	string
Mappings	rim: n/a
Organization.type.coding:HL7-Fachschluesselgruppe-erweitert.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Cardinality	0...*
Type	Extension
Alias	extensions, user content
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Slicing	Unordered, Open, by url(Value)
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()`
Mappings	rim: n/a
Organization.type.coding:HL7-Fachschluesselgruppe-erweitert.system
Definition	The identification of the code system that defines the meaning of the symbol in the code.
Cardinality	1...1
Type	uri
Summary	True
Requirements	Need to be unambiguous about the source of the definition of the symbol.
Comments	The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	v2: CE.3 rim:* ./codeSystem orim: fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem
Organization.type.coding:HL7-Fachschluesselgruppe-erweitert.version
Definition	The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.
Cardinality	1...1
Type	string
Summary	True
Comments	Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	v2: CE.7 rim:* ./codeSystemVersion orim: fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion
Organization.type.coding:HL7-Fachschluesselgruppe-erweitert.code
Definition	A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).
Cardinality	1...1
Type	code
Summary	True
Requirements	Need to refer to a particular code in the system.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	v2: CE.1 rim:* ./code orim: fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code
Organization.type.coding:HL7-Fachschluesselgruppe-erweitert.display
Definition	A representation of the meaning of the code in the system, following the rules of the system.
Cardinality	1...1
Type	string
Summary	True
Requirements	Need to be able to carry a human-readable meaning of the code for readers that do not know the system.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	v2: CE.2 - but note this is not well followed rim:* CV.displayName orim: fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName
Organization.type.coding:HL7-Fachschluesselgruppe-erweitert.userSelected
Definition	Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).
Cardinality	0...1
Type	boolean
Summary	True
Requirements	This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.
Comments	Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	v2: Sometimes implied by being first rim: CD.codingRationale orim: fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]
Organization.type.text
Definition	A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.
Cardinality	0...1
Type	string
Summary	True
Requirements	The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.
Comments	Very often the text is the same as a displayName of one of the codings.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	v2: CE.9. But note many systems use CE.2 for this rim: ./originalText[mediaType/code="text/plain"]/data orim: fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText
Organization.name
Definition	A name associated with the organization.
Cardinality	0...1
Type	string
Summary	True
Requirements	Need to use the name as the label of the organization.
Comments	If the name of an organization changes, consider putting the old name in the alias column so that it can still be located through searches.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	v2: XON.1 rim: .name servd: .PreferredName/Name
Organization.alias
Definition	A list of alternate names that the organization is known as, or was known as in the past.
Cardinality	0...*
Type	string
Requirements	Over time locations and organizations go through many changes and can be known by different names. For searching knowing previous names that the organization was known by can be very useful.
Comments	There are no dates associated with the alias/historic names, as this is not intended to track when names were used, but to assist in searching so that older names can still result in identifying the organization.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	rim: .name
Organization.telecom
Definition	Dieses Element beschreibt die vorhandenen Kontaktmöglichkeiten.
Cardinality	0...*
Type	KBV_PR_Base_Datatype_Contactpoint
Requirements	Human contact for the organization.
Comments	The use code 'home' is not to be used. Note that these contacts are not the contact details of people who are employed by or represent the organization, but official contacts for the organization itself.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` org-3: The telecom of an organization can never be of use 'home' `where(use = 'home').empty()` cpt-2: A system is required if a value is provided. `value.empty() or system.exists()`
Mappings	v2: ORC-22? rim: .telecom servd: ./ContactPoints rim: n/a v2: XTN rim: TEL servd: ContactPoint
Organization.address
Definition	An address for the organization.
Cardinality	0...*
Type	Address
Requirements	May need to keep track of the organization's addresses for contacting, billing or reporting requirements.
Comments	Organization may have multiple addresses with different uses or applicable periods. The use code 'home' is not to be used.
Slicing	Unordered, Open, by type(Value)
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` org-2: An address of an organization can never be of use 'home' `where(use = 'home').empty()`
Mappings	v2: ORC-23? rim: .address servd: ./PrimaryAddress and ./OtherAddresses
Organization.address:Strassenanschrift
Definition	Hier können Angaben zur Straßenanschrift gemacht werden.
Cardinality	0...*
Type	KBV_PR_Base_Datatype_Street_Address
Requirements	May need to keep track of the organization's addresses for contacting, billing or reporting requirements.
Comments	Note: address is intended to describe postal addresses for administrative purposes, not to describe absolute geographical coordinates. Postal addresses are often used as proxies for physical locations (also see the Location resource).
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` org-2: An address of an organization can never be of use 'home' `where(use = 'home').empty()` add-1: Wenn die Extension 'Hausnummer' verwendet wird, muss auch Address.line gefüllt werden `line.all($this.extension('http://hl7.org/fhir/StructureDefinition/iso21090-ADXP-houseNumber').empty() or $this.hasValue())` add-2: Wenn die Extension 'Strasse' verwendet wird, muss auch Address.line gefüllt werden `line.all($this.extension('http://hl7.org/fhir/StructureDefinition/iso21090-ADXP-streetName').empty() or $this.hasValue())` add-3: Wenn die Extension 'Postfach' verwendet wird, muss auch Address.line gefüllt werden `line.all($this.extension('http://hl7.org/fhir/StructureDefinition/iso21090-ADXP-postBox').empty() or $this.hasValue())` add-4: Eine Postfach-Adresse darf nicht vom Type "physical" oder "both" sein. `line.all($this.extension('http://hl7.org/fhir/StructureDefinition/iso21090-ADXP-postBox').empty() or $this.hasValue()) or type='postal' or type.empty()` add-5: Wenn die Extension 'Adresszusatz' verwendet wird, muss auch Address.line gefüllt werden `line.all($this.extension('http://hl7.org/fhir/StructureDefinition/iso21090-ADXP-additionalLocator').empty() or $this.hasValue())` add-6: Wenn die Extension 'Postfach' verwendet wird, dürfen die Extensions 'Strasse' und 'Hausnummer' nicht verwendet werden `line.all($this.extension('http://hl7.org/fhir/StructureDefinition/iso21090-ADXP-postBox').empty() or ($this.extension('http://hl7.org/fhir/StructureDefinition/iso21090-ADXP-streetName').empty() and $this.extension('http://hl7.org/fhir/StructureDefinition/iso21090-ADXP-houseNumber').empty()))` add-7: Wenn die Extension 'Precinct' (Stadtteil) verwendet wird, dann muss diese Information auch als separates line-item abgebildet sein. `extension('http://hl7.org/fhir/StructureDefinition/iso21090-ADXP-precinct').empty() or all(line contains extension('http://hl7.org/fhir/StructureDefinition/iso21090-ADXP-precinct').value.ofType(string))`
Examples	Beispiel für einfache Adresse { "use": "home", "type": "postal", "line": [ "Musterweg 42" ], "city": "Musterhausen", "postalCode": "99999" }
Mappings	v2: ORC-23? rim: .address servd: ./PrimaryAddress and ./OtherAddresses rim: n/a v2: XAD rim: AD servd: Address
Organization.address:Postfach
Definition	Eine Adresse gemäß postalischer Konventionen (im Gegensatz zu bspw. GPS-Koordinaten). Die Adresse kann sowohl zur Zustellung von Postsendungen oder zum Aufsuchen von Orten, die keine gültige Postadresse haben, verwendet werden. Die verwendeten Extensions in diesem Profil bilden die Struktur der Adresse ab, wie sie im VSDM-Format der elektronischen Versichertenkarte verwendet wird. Insbesondere bei ausländischenOrt Adresse oder Adressen, die nicht durch Einlesen einer elektronischen Versichertenkarte erfasst wurden, sind abweichende Strukturen möglich. Die Verwendung der Extensions ist nicht verpflichtend.
Cardinality	0...*
Type	KBV_PR_Base_Datatype_Post_Office_Box
Requirements	May need to keep track of the organization's addresses for contacting, billing or reporting requirements.
Comments	Note: address is intended to describe postal addresses for administrative purposes, not to describe absolute geographical coordinates. Postal addresses are often used as proxies for physical locations (also see the Location resource).
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` org-2: An address of an organization can never be of use 'home' `where(use = 'home').empty()` add-1: Wenn die Extension 'Hausnummer' verwendet wird, muss auch Address.line gefüllt werden `line.all($this.extension('http://hl7.org/fhir/StructureDefinition/iso21090-ADXP-houseNumber').empty() or $this.hasValue())` add-2: Wenn die Extension 'Strasse' verwendet wird, muss auch Address.line gefüllt werden `line.all($this.extension('http://hl7.org/fhir/StructureDefinition/iso21090-ADXP-streetName').empty() or $this.hasValue())` add-3: Wenn die Extension 'Postfach' verwendet wird, muss auch Address.line gefüllt werden `line.all($this.extension('http://hl7.org/fhir/StructureDefinition/iso21090-ADXP-postBox').empty() or $this.hasValue())` add-4: Eine Postfach-Adresse darf nicht vom Type "physical" oder "both" sein. `line.all($this.extension('http://hl7.org/fhir/StructureDefinition/iso21090-ADXP-postBox').empty() or $this.hasValue()) or type='postal' or type.empty()` add-5: Wenn die Extension 'Adresszusatz' verwendet wird, muss auch Address.line gefüllt werden `line.all($this.extension('http://hl7.org/fhir/StructureDefinition/iso21090-ADXP-additionalLocator').empty() or $this.hasValue())` add-6: Wenn die Extension 'Postfach' verwendet wird, dürfen die Extensions 'Strasse' und 'Hausnummer' nicht verwendet werden `line.all($this.extension('http://hl7.org/fhir/StructureDefinition/iso21090-ADXP-postBox').empty() or ($this.extension('http://hl7.org/fhir/StructureDefinition/iso21090-ADXP-streetName').empty() and $this.extension('http://hl7.org/fhir/StructureDefinition/iso21090-ADXP-houseNumber').empty()))` add-7: Wenn die Extension 'Precinct' (Stadtteil) verwendet wird, dann muss diese Information auch als separates line-item abgebildet sein. `extension('http://hl7.org/fhir/StructureDefinition/iso21090-ADXP-precinct').empty() or all(line contains extension('http://hl7.org/fhir/StructureDefinition/iso21090-ADXP-precinct').value.ofType(string))` postBox-de-1: Die Extension 'http://hl7.org/fhir/StructureDefinition/iso21090-ADXP-postBox' darf nur einmal vorkommen. `line.where($this.extension('http://hl7.org/fhir/StructureDefinition/iso21090-ADXP-postBox').exists()).count()=1`
Examples	Beispiel für einfache Adresse { "use": "home", "type": "postal", "line": [ "Musterweg 42" ], "city": "Musterhausen", "postalCode": "99999" }
Mappings	v2: ORC-23? rim: .address servd: ./PrimaryAddress and ./OtherAddresses rim: n/a v2: XAD rim: AD servd: Address
Organization.partOf
Definition	The organization of which this organization forms a part.
Cardinality	0...1
Type	Reference(Organization)
Summary	True
Requirements	Need to be able to track the hierarchy of organizations within an organization.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	v2: No equivalent in HL7 v2 rim: .playedBy[classCode=Part].scoper servd: n/a
Organization.contact
Definition	Contact for the organization for a certain purpose.
Cardinality	0...*
Type	BackboneElement
Requirements	Need to keep track of assigned contact points within bigger organization.
Comments	Where multiple contacts for the same purpose are provided there is a standard extension that can be used to determine which one is the preferred contact to use.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	rim: .contactParty
Organization.contact.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Cardinality	0...1
Type	string
Mappings	rim: n/a
Organization.contact.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Cardinality	0...*
Type	Extension
Alias	extensions, user content
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()`
Mappings	rim: n/a
Organization.contact.modifierExtension
Definition	May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).
Cardinality	0...*
Type	Extension
Modifier	True
Summary	True
Alias	extensions, user content, modifiers
Requirements	Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()`
Mappings	rim: N/A
Organization.contact.purpose
Definition	Indicates a purpose for which the contact can be reached.
Cardinality	0...1
Type	CodeableConcept
Binding	The purpose for which you would contact a contact party. ContactEntityType (extensible)
Requirements	Need to distinguish between multiple contact persons.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	rim: ./type
Organization.contact.name
Definition	A name associated with the contact.
Cardinality	0...1
Type	HumanName
Requirements	Need to be able to track the person by name.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	v2: PID-5, PID-9 rim: ./name
Organization.contact.telecom
Definition	A contact detail (e.g. a telephone number or an email address) by which the party may be contacted.
Cardinality	0...*
Type	ContactPoint
Requirements	People have (primary) ways to contact them in some way such as phone, email.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	v2: PID-13, PID-14 rim: ./telecom
Organization.contact.address
Definition	Visiting or postal addresses for the contact.
Cardinality	0...1
Type	Address
Requirements	May need to keep track of a contact party's address for contacting, billing or reporting requirements.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	v2: PID-11 rim: ./addr
Organization.contact.address.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Cardinality	0...1
Type	string
Mappings	rim: n/a
Organization.contact.address.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Cardinality	0...*
Type	Extension
Alias	extensions, user content
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Slicing	Unordered, Open, by url(Value)
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()`
Mappings	rim: n/a
Organization.contact.address.use
Definition	The purpose of this address.
Cardinality	0...1
Type	code
Binding	The use of an address. AddressUse (required)
Modifier	True
Summary	True
Requirements	Allows an appropriate address to be chosen from a list of many.
Comments	Applications can assume that an address is current unless it explicitly says that it is temporary or old.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Examples	General home
Mappings	v2: XAD.7 rim: unique(./use) servd: ./AddressPurpose
Organization.contact.address.type
Definition	Distinguishes between physical addresses (those you can visit) and mailing addresses (e.g. PO Boxes and care-of addresses). Most addresses are both.
Cardinality	0...1
Type	code
Binding	The type of an address (physical / postal). AddressType (required)
Summary	True
Comments	The definition of Address states that "address is intended to describe postal addresses, not physical locations". However, many applications track whether an address has a dual purpose of being a location that can be visited as well as being a valid delivery destination, and Postal addresses are often used as proxies for physical locations (also see the Location resource).
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Examples	General both
Mappings	v2: XAD.18 rim: unique(./use) vcard: address type parameter
Organization.contact.address.text
Definition	Specifies the entire address as it should be displayed e.g. on a postal label. This may be provided instead of or as well as the specific parts.
Cardinality	0...1
Type	string
Summary	True
Requirements	A renderable, unencoded form.
Comments	Can provide both a text representation and parts. Applications updating an address SHALL ensure that when both text and parts are present, no content is included in the text that isn't found in a part.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Examples	General 137 Nowhere Street, Erewhon 9132
Mappings	v2: XAD.1 + XAD.2 + XAD.3 + XAD.4 + XAD.5 + XAD.6 rim: ./formatted vcard: address label parameter
Organization.contact.address.line
Definition	This component contains the house number, apartment number, street name, street direction, P.O. Box number, delivery hints, and similar address information.
Cardinality	0...*
Type	string
Summary	True
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Examples	General 137 Nowhere Street
Mappings	v2: XAD.1 + XAD.2 (note: XAD.1 and XAD.2 have different meanings for a company address than for a person address) rim: AD.part[parttype = AL] vcard: street servd: ./StreetAddress (newline delimitted)
Organization.contact.address.city
Definition	The name of the city, town, suburb, village or other community or delivery center.
Cardinality	0...1
Type	string
Summary	True
Alias	Municpality
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Examples	General Erewhon
Mappings	v2: XAD.3 rim: AD.part[parttype = CTY] vcard: locality servd: ./Jurisdiction
Organization.contact.address.district
Definition	The name of the administrative area (county).
Cardinality	0...1
Type	string
Summary	True
Alias	County
Comments	District is sometimes known as county, but in some regions 'county' is used in place of city (municipality), so county name should be conveyed in city instead.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Examples	General Madison
Mappings	v2: XAD.9 rim: AD.part[parttype = CNT \| CPA]
Organization.contact.address.state
Definition	Sub-unit of a country with limited sovereignty in a federally organized country. A code may be used if codes are in common use (e.g. US 2 letter state codes).
Cardinality	0...1
Type	string
Summary	True
Alias	Province, Territory
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	v2: XAD.4 rim: AD.part[parttype = STA] vcard: region servd: ./Region
Organization.contact.address.postalCode
Definition	A postal code designating a region defined by the postal service.
Cardinality	0...1
Type	string
Summary	True
Alias	Zip
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Examples	General 9132
Mappings	v2: XAD.5 rim: AD.part[parttype = ZIP] vcard: code servd: ./PostalIdentificationCode
Organization.contact.address.country
Definition	Angabe des Staates als Länderkennzeichen nach DEUEV Anlage 8.
Cardinality	0...1
Type	string
Binding	KBV_VS_Base_Deuev_Anlage_8 (extensible)
Summary	True
Comments	ISO 3166 3 letter codes can be used in place of a human readable country name.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	v2: XAD.6 rim: AD.part[parttype = CNT] vcard: country servd: ./Country
Organization.contact.address.period
Definition	Time period when address was/is in use.
Cardinality	0...1
Type	Period
Summary	True
Requirements	Allows addresses to be placed in historical context.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Examples	General { "start": "2010-03-23", "end": "2010-07-01" }
Mappings	v2: XAD.12 / XAD.13 + XAD.14 rim: ./usablePeriod[type="IVL<TS>"] servd: ./StartDate and ./EndDate
Organization.endpoint
Definition	Technical endpoints providing access to services operated for the organization.
Cardinality	0...*
Type	Reference(Endpoint)
Requirements	Organizations have multiple systems that provide various services and need to be able to define the technical connection details for how to connect to them, and for what purpose.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	rim: n/a

<StructureDefinition xmlns="http://hl7.org/fhir">
    <id value="KBV-PR-116117-TERMINSERVICE-TVS-TSYNCH-Organization" />
    <text>
        <status value="generated" />
        --- We have skipped the narrative for better readability of the resource ---
    </text>
    <url value="https://fhir.kbv.de/StructureDefinition/KBV_PR_116117_TERMINSERVICE_TVS_TERMINSYNCHRONISATION_Organization" />
    <version value="1.0.0" />
    <name value="KBV_PR_116117_TERMINSERVICE_TVS_TERMINSYNCHRONISATION_Organization" />
    <title value="KBV_PR_116117_TERMINSERVICE_TVS_TERMINSYNCHRONISATION_Organization" />
    <status value="active" />
    <publisher value="kv.digital GmbH" />
    <contact>
        <name value="kv.digital GmbH" />
        <telecom>
            <system value="url" />
            <value value="https://www.kv.digital" />
        </telecom>
    </contact>
    <description value="Diese Ressource enth&#228;lt Informationen zu einer Praxis/medizinischen Einrichtung." />
    <copyright value="Im folgenden Profil k&#246;nnen Codes aus den Code-Systemen SNOMED CT&#174;, LOINC, Ucum, ATC, ICD-10-GM, ICD-10-WHO, OPS, Alpha-ID/Alpha-ID-SE und ICF enthalten sein, die dem folgenden Urheberrecht unterliegen: This material includes SNOMED CT&#174; Clinical Terms&#174; (SNOMED CT&#174; CT&#174;) which is used by permission of SNOMED CT&#174; International. All rights reserved. SNOMED CT&#174; CT&#174;, was originally created by The College of American Pathologists. SNOMED CT&#174; and SNOMED CT&#174; CT are registered trademarks of SNOMED CT&#174; International. Implementers of these artefacts must have the appropriate SNOMED CT&#174; CT Affiliate license. This material contains content from LOINC (http://LOINC.org). LOINC is copyright &#169; 1995-2020, Regenstrief Institute, Inc. and the Logical Observation Identifiers Names and Codes (LOINC) Committee and is available at no cost under the license at http://LOINC.org/license. LOINC&#174; is a registered United States trademark of Regenstrief Institute, Inc. This product includes all or a portion of the UCUM table, UCUM codes, and UCUM definitions or is derived from it, subject to a license from Regenstrief Institute, Inc. and The UCUM Organization. Your use of the UCUM table, UCUM codes, UCUM definitions also is subject to this license, a copy of which is available at http://unitsofmeasure.org. The current complete UCUM table, UCUM Specification are available for download at http://unitsofmeasure.org. The UCUM table and UCUM codes are copyright &#169; 1995-2009, Regenstrief Institute, Inc. and the Unified Codes for Units of Measures (UCUM) Organization. All rights reserved. THE UCUM TABLE (IN ALL FORMATS), UCUM DEFINITIONS, AND SPECIFICATION ARE PROVIDED &#39;AS IS.&#39; ANY EXPRESS OR IMPLIED WARRANTIES ARE DISCLAIMED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Dieses Material enth&#228;lt Inhalte aus ATC. Die Erstellung erfolgte unter Verwendung der Datentr&#228;ger der amtlichen Fassung der ATCKlassifikation mit DDD des Bundesinstituts f&#252;r Arzneimittel und Medizinprodukte (BfArM). Dieses Material enth&#228;lt Inhalte aus ICD-10-GM, ICD-10-WHO, OPS Alpha-ID ans Alpha-ID-SE. Die Erstellung erfolgt unter Verwendung der maschinenlesbaren Fassung des Bundesinstituts f&#252;r Arzneimittel und Medizinprodukte (BfArM). Dieses Material enth&#228;lt Inhalte aus ICF. Die Erstellung erfolgt unter Verwendung der maschinenlesbaren Fassung des Deutschen Instituts f&#252;r Medizinische Dokumentation und Information (DIMDI). ICF-Kodes, -Begriffe und -Texte &#169; Weltgesundheitsorganisation, &#252;bersetzt und herausgegeben durch das Deutsche Institut f&#252;r Medizinische Dokumentation und Information von der International classification of functioning, disability and health - ICF, herausgegeben durch die Weltgesundheitsorganisation." />
    <fhirVersion value="4.0.1" />
    <kind value="resource" />
    <abstract value="false" />
    <type value="Organization" />
    <baseDefinition value="https://fhir.kbv.de/StructureDefinition/KBV_PR_Base_Organization|1.6.0" />
    <derivation value="constraint" />
    <differential>
        <element id="Organization">
            <path value="Organization" />
            <short value="Praxis / medizinischen Einrichtung" />
            <definition value="Die Einrichtung beschreibt den Ort, an dem ein Kontakt zwischen dem Patienten und der leistungserbringenden Person stattfindet (z.B. eine Praxis)." />
        </element>
        <element id="Organization.meta">
            <path value="Organization.meta" />
            <min value="1" />
        </element>
        <element id="Organization.meta.profile">
            <path value="Organization.meta.profile" />
            <slicing>
                <discriminator>
                    <type value="value" />
                    <path value="$this" />
                </discriminator>
                <rules value="open" />
            </slicing>
            <min value="1" />
        </element>
        <element id="Organization.meta.profile:kvdigitalProfil">
            <path value="Organization.meta.profile" />
            <sliceName value="kvdigitalProfil" />
            <min value="1" />
            <max value="1" />
            <patternCanonical value="https://fhir.kbv.de/StructureDefinition/KBV_PR_116117_TERMINSERVICE_TVS_TERMINSYNCHRONISATION_Organization|1.0.0" />
        </element>
        <element id="Organization.text">
            <path value="Organization.text" />
            <definition value="In diesem Element k&#246;nnen die in der Instanz enthaltenen Informationen in einer menschenlesbaren Form zusammengefasst werden. Dabei ist zu beachten, dass keine Informationen aufgenommen werden d&#252;rfen, die nicht in strukturierter Form an anderer Stelle in der Instanz enthalten sind." />
        </element>
        <element id="Organization.text.status">
            <path value="Organization.text.status" />
            <fixedCode value="extensions" />
        </element>
        <element id="Organization.identifier">
            <path value="Organization.identifier" />
            <short value="Identifier einer Praxis / medizinischen Einrichtung" />
            <min value="1" />
            <mustSupport value="true" />
        </element>
        <element id="Organization.identifier:Betriebsstaettennummer">
            <path value="Organization.identifier" />
            <sliceName value="Betriebsstaettennummer" />
            <short value="BSNR" />
            <definition value="Die Betriebsst&#228;ttennummer der Praxis / medizinischen Einrichtung" />
            <min value="1" />
            <max value="1" />
            <mustSupport value="true" />
        </element>
        <element id="Organization.identifier:Betriebsstaettennummer.type">
            <path value="Organization.identifier.type" />
            <mustSupport value="true" />
        </element>
        <element id="Organization.identifier:Betriebsstaettennummer.type.coding">
            <path value="Organization.identifier.type.coding" />
            <mustSupport value="true" />
        </element>
        <element id="Organization.identifier:Betriebsstaettennummer.type.coding.system">
            <path value="Organization.identifier.type.coding.system" />
            <mustSupport value="true" />
        </element>
        <element id="Organization.identifier:Betriebsstaettennummer.type.coding.version">
            <path value="Organization.identifier.type.coding.version" />
            <mustSupport value="true" />
        </element>
        <element id="Organization.identifier:Betriebsstaettennummer.type.coding.code">
            <path value="Organization.identifier.type.coding.code" />
            <mustSupport value="true" />
        </element>
        <element id="Organization.identifier:Betriebsstaettennummer.type.coding.display">
            <path value="Organization.identifier.type.coding.display" />
            <min value="1" />
            <mustSupport value="true" />
        </element>
        <element id="Organization.identifier:Betriebsstaettennummer.system">
            <path value="Organization.identifier.system" />
            <mustSupport value="true" />
        </element>
        <element id="Organization.identifier:Betriebsstaettennummer.value">
            <path value="Organization.identifier.value" />
            <short value="BSNR" />
            <mustSupport value="true" />
        </element>
    </differential>
</StructureDefinition>

{
    "resourceType": "StructureDefinition",
    "id": "KBV-PR-116117-TERMINSERVICE-TVS-TSYNCH-Organization",
    "text": {
        "status": "generated",
        --- We have skipped the narrative for better readability of the resource ---
    },
    "url": "https://fhir.kbv.de/StructureDefinition/KBV_PR_116117_TERMINSERVICE_TVS_TERMINSYNCHRONISATION_Organization",
    "version": "1.0.0",
    "name": "KBV_PR_116117_TERMINSERVICE_TVS_TERMINSYNCHRONISATION_Organization",
    "title": "KBV_PR_116117_TERMINSERVICE_TVS_TERMINSYNCHRONISATION_Organization",
    "status": "active",
    "publisher": "kv.digital GmbH",
    "contact":  [
        {
            "name": "kv.digital GmbH",
            "telecom":  [
                {
                    "system": "url",
                    "value": "https://www.kv.digital"
                }
            ]
        }
    ],
    "description": "Diese Ressource enthält Informationen zu einer Praxis/medizinischen Einrichtung.",
    "copyright": "Im folgenden Profil können Codes aus den Code-Systemen SNOMED CT®, LOINC, Ucum, ATC, ICD-10-GM, ICD-10-WHO, OPS, Alpha-ID/Alpha-ID-SE und ICF enthalten sein, die dem folgenden Urheberrecht unterliegen: This material includes SNOMED CT® Clinical Terms® (SNOMED CT® CT®) which is used by permission of SNOMED CT® International. All rights reserved. SNOMED CT® CT®, was originally created by The College of American Pathologists. SNOMED CT® and SNOMED CT® CT are registered trademarks of SNOMED CT® International. Implementers of these artefacts must have the appropriate SNOMED CT® CT Affiliate license. This material contains content from LOINC (http://LOINC.org). LOINC is copyright © 1995-2020, Regenstrief Institute, Inc. and the Logical Observation Identifiers Names and Codes (LOINC) Committee and is available at no cost under the license at http://LOINC.org/license. LOINC® is a registered United States trademark of Regenstrief Institute, Inc. This product includes all or a portion of the UCUM table, UCUM codes, and UCUM definitions or is derived from it, subject to a license from Regenstrief Institute, Inc. and The UCUM Organization. Your use of the UCUM table, UCUM codes, UCUM definitions also is subject to this license, a copy of which is available at http://unitsofmeasure.org. The current complete UCUM table, UCUM Specification are available for download at http://unitsofmeasure.org. The UCUM table and UCUM codes are copyright © 1995-2009, Regenstrief Institute, Inc. and the Unified Codes for Units of Measures (UCUM) Organization. All rights reserved. THE UCUM TABLE (IN ALL FORMATS), UCUM DEFINITIONS, AND SPECIFICATION ARE PROVIDED 'AS IS.' ANY EXPRESS OR IMPLIED WARRANTIES ARE DISCLAIMED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Dieses Material enthält Inhalte aus ATC. Die Erstellung erfolgte unter Verwendung der Datenträger der amtlichen Fassung der ATCKlassifikation mit DDD des Bundesinstituts für Arzneimittel und Medizinprodukte (BfArM). Dieses Material enthält Inhalte aus ICD-10-GM, ICD-10-WHO, OPS Alpha-ID ans Alpha-ID-SE. Die Erstellung erfolgt unter Verwendung der maschinenlesbaren Fassung des Bundesinstituts für Arzneimittel und Medizinprodukte (BfArM). Dieses Material enthält Inhalte aus ICF. Die Erstellung erfolgt unter Verwendung der maschinenlesbaren Fassung des Deutschen Instituts für Medizinische Dokumentation und Information (DIMDI). ICF-Kodes, -Begriffe und -Texte © Weltgesundheitsorganisation, übersetzt und herausgegeben durch das Deutsche Institut für Medizinische Dokumentation und Information von der International classification of functioning, disability and health - ICF, herausgegeben durch die Weltgesundheitsorganisation.",
    "fhirVersion": "4.0.1",
    "kind": "resource",
    "abstract": false,
    "type": "Organization",
    "baseDefinition": "https://fhir.kbv.de/StructureDefinition/KBV_PR_Base_Organization|1.6.0",
    "derivation": "constraint",
    "differential": {
        "element":  [
            {
                "id": "Organization",
                "path": "Organization",
                "short": "Praxis / medizinischen Einrichtung",
                "definition": "Die Einrichtung beschreibt den Ort, an dem ein Kontakt zwischen dem Patienten und der leistungserbringenden Person stattfindet (z.B. eine Praxis)."
            },
            {
                "id": "Organization.meta",
                "path": "Organization.meta",
                "min": 1
            },
            {
                "id": "Organization.meta.profile",
                "path": "Organization.meta.profile",
                "slicing": {
                    "discriminator":  [
                        {
                            "type": "value",
                            "path": "$this"
                        }
                    ],
                    "rules": "open"
                },
                "min": 1
            },
            {
                "id": "Organization.meta.profile:kvdigitalProfil",
                "path": "Organization.meta.profile",
                "sliceName": "kvdigitalProfil",
                "min": 1,
                "max": "1",
                "patternCanonical": "https://fhir.kbv.de/StructureDefinition/KBV_PR_116117_TERMINSERVICE_TVS_TERMINSYNCHRONISATION_Organization|1.0.0"
            },
            {
                "id": "Organization.text",
                "path": "Organization.text",
                "definition": "In diesem Element können die in der Instanz enthaltenen Informationen in einer menschenlesbaren Form zusammengefasst werden. Dabei ist zu beachten, dass keine Informationen aufgenommen werden dürfen, die nicht in strukturierter Form an anderer Stelle in der Instanz enthalten sind."
            },
            {
                "id": "Organization.text.status",
                "path": "Organization.text.status",
                "fixedCode": "extensions"
            },
            {
                "id": "Organization.identifier",
                "path": "Organization.identifier",
                "short": "Identifier einer Praxis / medizinischen Einrichtung",
                "min": 1,
                "mustSupport": true
            },
            {
                "id": "Organization.identifier:Betriebsstaettennummer",
                "path": "Organization.identifier",
                "sliceName": "Betriebsstaettennummer",
                "short": "BSNR",
                "definition": "Die Betriebsstättennummer der Praxis / medizinischen Einrichtung",
                "min": 1,
                "max": "1",
                "mustSupport": true
            },
            {
                "id": "Organization.identifier:Betriebsstaettennummer.type",
                "path": "Organization.identifier.type",
                "mustSupport": true
            },
            {
                "id": "Organization.identifier:Betriebsstaettennummer.type.coding",
                "path": "Organization.identifier.type.coding",
                "mustSupport": true
            },
            {
                "id": "Organization.identifier:Betriebsstaettennummer.type.coding.system",
                "path": "Organization.identifier.type.coding.system",
                "mustSupport": true
            },
            {
                "id": "Organization.identifier:Betriebsstaettennummer.type.coding.version",
                "path": "Organization.identifier.type.coding.version",
                "mustSupport": true
            },
            {
                "id": "Organization.identifier:Betriebsstaettennummer.type.coding.code",
                "path": "Organization.identifier.type.coding.code",
                "mustSupport": true
            },
            {
                "id": "Organization.identifier:Betriebsstaettennummer.type.coding.display",
                "path": "Organization.identifier.type.coding.display",
                "min": 1,
                "mustSupport": true
            },
            {
                "id": "Organization.identifier:Betriebsstaettennummer.system",
                "path": "Organization.identifier.system",
                "mustSupport": true
            },
            {
                "id": "Organization.identifier:Betriebsstaettennummer.value",
                "path": "Organization.identifier.value",
                "short": "BSNR",
                "mustSupport": true
            }
        ]
    }
}

KBV_PR_116117_TERMINSERVICE_TVS_TERMINSYNCHRONISATION_Organization

Anmerkungen

Folgende (mit einem Must-Support-Flag gekennzeichnete) Elemente werden von den Systemen des 116117 Terminservices gespeichert, verarbeitet und zurückgegeben:

identifier:Betriebsstaettennummer

Terminology Bindings

Es sind KEINE Terminologien abweichend vom Basisprofil definiert.

Operationen & Interaktionen

Es können KEINE Operationen und Interaktionen auf dieser Ressource ausgeführt werden.

Beispiele

Alle Beispiele sind hier im vorliegenden Projekt zu finden.

Maximalbeispiel = Minimalbeispiel

<Organization xmlns="http://hl7.org/fhir">
    <id value="bdebdbc8-c70f-44e2-b2b9-32b569204ca9" />
    <meta>
        <profile value="https://fhir.kbv.de/StructureDefinition/KBV_PR_116117_TERMINSERVICE_TVS_TERMINSYNCHRONISATION_Organization|1.0.0" />
    </meta>
    <text>
        <status value="extensions" />
        --- We have skipped the narrative for better readability of the resource ---
    </text>
    <identifier>
        <type>
            <coding>
                <system value="http://terminology.hl7.org/CodeSystem/v2-0203" />
                <code value="BSNR" />
                <display value="Primary physician office number" />
            </coding>
        </type>
        <system value="https://fhir.kbv.de/NamingSystem/KBV_NS_Base_BSNR" />
        <value value="123456789" />
    </identifier>
</Organization>