ResearchSubject

A research subject is the entity of interest in a research study, typically a human being or an animal, but can also be a device, group of humans or animals, or a tissue sample.

Overview

`The below overview shows the elements of the resource, data type and the cardinality of each. Further details like "Binding"/"Fixed values"/"contraints" etc can be found on clicking on each element.

Canonical URL - http://roche.com/fhir/rdc/StructureDefinition/researchsubject

idΣ0..1id
metaΣ0..1Meta
implicitRulesΣ ?!0..1uri
language0..1codeBinding
textC0..1Narrative
contained0..*Resource
extensionC0..*Extension
modifierExtension?! C0..*Extension
id0..1string
extensionC0..*Extension
useΣ ?!0..1codeBinding
typeΣ0..1CodeableConceptBinding
systemΣ0..1uri
valueΣ1..1string
periodΣ C0..0Period
assignerΣ C0..0Reference(Organization)
statusΣ ?!1..1codeBinding
periodΣ C0..0Period
studyΣ C1..1Reference(ResearchStudy)
individualΣ C1..1Reference(Patient)
assignedArm0..0string
actualArm0..0string
consentC0..0Reference(Consent)

Details

The below section shows a detailed view of the resource

ResearchSubject
ShortInvestigation to increase healthcare-related patient-independent knowledge
Definition

A process where a researcher or organization plans and then executes a series of steps intended to increase the field of healthcare-related knowledge. This includes studies of safety, efficacy, comparative effectiveness and other information about medications, devices, therapies and other interventional and investigative techniques. A ResearchStudy involves the gathering of information about human or animal subjects.

Cardinality0..*
AliasStudy Subject
Comments

Need to make sure we encompass public health studies.

Constraints
  • dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources
    contained.contained.empty()
  • dom-1: If the resource is contained in another resource, it SHALL NOT contain any narrative
    contained.text.empty()
  • dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated
    contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()
  • dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource
    contained.where(('#'+id in %resource.descendants().reference).not()).empty()
Mappings
  • rim: Entity. Role, or Act
  • v2: OBX
  • rim: Observation[classCode=CLNTRL, moodCode=EVN]
  • w5: clinical.diagnostics
ResearchSubject.id
ShortLogical id of this artifact
Definition

The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

Cardinality0..1
Typeid
SummaryTrue
Comments

The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

ConditionsThe cardinality or value of this element may be affected by these constraints: ele-1
Constraints
  • ele-1: All FHIR elements must have a @value or children
    hasValue() | (children().count() > id.count())
Mappings
  • rim: n/a
ResearchSubject.meta
ShortMetadata about the resource
Definition

The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content may not always be associated with version changes to the resource.

Cardinality0..1
TypeMeta
SummaryTrue
ConditionsThe cardinality or value of this element may be affected by these constraints: ele-1
Constraints
  • ele-1: All FHIR elements must have a @value or children
    hasValue() | (children().count() > id.count())
Mappings
  • rim: n/a
  • rim: N/A
ResearchSubject.implicitRules
ShortA set of rules under which this content was created
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content.

Cardinality0..1
Typeuri
ModifierTrue
SummaryTrue
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element.

This element is labelled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation.

ConditionsThe cardinality or value of this element may be affected by these constraints: ele-1
Constraints
  • ele-1: All FHIR elements must have a @value or children
    hasValue() | (children().count() > id.count())
Mappings
  • rim: n/a
ResearchSubject.language
ShortLanguage of the resource content
Definition

The base language in which the resource is written.

Cardinality0..1
Typecode
Binding

A human language.

Common Languages (extensible)

Binding extensions
maxValueSetAll Languages
Comments

Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

ConditionsThe cardinality or value of this element may be affected by these constraints: ele-1
Constraints
  • ele-1: All FHIR elements must have a @value or children
    hasValue() | (children().count() > id.count())
Mappings
  • rim: n/a
ResearchSubject.text
ShortText summary of the resource, for human interpretation
Definition

A human-readable narrative that contains a summary of the resource, and may be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

Cardinality0..1
TypeNarrative
Aliasnarrative, html, xhtml, display
Comments

Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded in formation is added later.

ConditionsThe cardinality or value of this element may be affected by these constraints: ele-1, dom-1
Constraints
  • ele-1: All FHIR elements must have a @value or children
    hasValue() | (children().count() > id.count())
Mappings
  • rim: n/a
  • rim: N/A
  • rim: Act.text?
ResearchSubject.contained
ShortContained, inline Resources
Definition

These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

Cardinality0..*
TypeResource
Aliasinline resources, anonymous resources, contained resources
Comments

This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again.

Mappings
  • rim: Entity. Role, or Act
  • rim: N/A
ResearchSubject.extension
ShortAdditional Content defined by implementations
Definition

May be used to represent additional information that is not part of the basic definition of the resource. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Cardinality0..*
TypeExtension
Aliasextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Slicing

Unordered, Open, by url(Value)

Extensions are always sliced by (at least) url

ConditionsThe cardinality or value of this element may be affected by these constraints: ele-1
Constraints
  • ele-1: All FHIR elements must have a @value or children
    hasValue() | (children().count() > id.count())
  • ext-1: Must have either extensions or value[x], not both
    extension.exists() != value.exists()
Mappings
  • rim: n/a
  • rim: N/A
ResearchSubject.modifierExtension
ShortExtensions that cannot be ignored
Definition

May be used to represent additional information that is not part of the basic definition of the resource, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Cardinality0..*
TypeExtension
ModifierTrue
Aliasextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Slicing

Unordered, Open, by url(Value)

Extensions are always sliced by (at least) url

ConditionsThe cardinality or value of this element may be affected by these constraints: ele-1
Constraints
  • ele-1: All FHIR elements must have a @value or children
    hasValue() | (children().count() > id.count())
  • ext-1: Must have either extensions or value[x], not both
    extension.exists() != value.exists()
Mappings
  • rim: n/a
  • rim: N/A
ResearchSubject.identifier
ShortBusiness Identifier for research subject
Definition

Identifiers assigned to this research study by the sponsor or other systems.

Cardinality1..1
TypeIdentifier
SummaryTrue
Requirements

Allows identification of the research study as it is known by various participating systems and in a way that remains consistent across servers.

ConditionsThe cardinality or value of this element may be affected by these constraints: ele-1
Constraints
  • ele-1: All FHIR elements must have a @value or children
    hasValue() | (children().count() > id.count())
Mappings
  • rim: n/a
  • v2: CX / EI (occasionally, more often EI maps to a resource id or a URL)
  • rim: II - see see identifier pattern at http://wiki.hl7.org/index.php?title=Common_Design_Patterns#Identifier_Pattern for relevant discussion. The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT]
  • servd: Identifier
  • rim: .identifier
  • w5: id
ResearchSubject.identifier.id
Shortxml:id (or equivalent in JSON)
Definition

unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Cardinality0..1
Typestring
Comments

Note that FHIR strings may not exceed 1MB in size

ConditionsThe cardinality or value of this element may be affected by these constraints: ele-1
Constraints
  • ele-1: All FHIR elements must have a @value or children
    hasValue() | (children().count() > id.count())
Mappings
  • rim: n/a
ResearchSubject.identifier.extension
ShortAdditional Content defined by implementations
Definition

May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Cardinality0..*
TypeExtension
Aliasextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Slicing

Unordered, Open, by url(Value)

Extensions are always sliced by (at least) url

ConditionsThe cardinality or value of this element may be affected by these constraints: ele-1
Constraints
  • ele-1: All FHIR elements must have a @value or children
    hasValue() | (children().count() > id.count())
  • ext-1: Must have either extensions or value[x], not both
    extension.exists() != value.exists()
Mappings
  • rim: n/a
  • rim: N/A
ResearchSubject.identifier.use
Shortusual | official | temp | secondary (If known)
Definition

The purpose of this identifier.

Cardinality0..1
Typecode
Binding

Identifies the purpose for this identifier, if known .

IdentifierUse (required)

ModifierTrue
SummaryTrue
Requirements

Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

Comments

This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one. Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

ConditionsThe cardinality or value of this element may be affected by these constraints: ele-1
Constraints
  • ele-1: All FHIR elements must have a @value or children
    hasValue() | (children().count() > id.count())
Mappings
  • rim: n/a
  • v2: N/A
  • rim: Role.code or implied by context
ResearchSubject.identifier.type
ShortDescription of identifier
Definition

A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

Cardinality0..1
TypeCodeableConcept
Binding

A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.

Identifier Type Codes (extensible)

SummaryTrue
Requirements

Allows users to make use of identifiers when the identifier system is not known.

Comments

This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage.

Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

ConditionsThe cardinality or value of this element may be affected by these constraints: ele-1
Constraints
  • ele-1: All FHIR elements must have a @value or children
    hasValue() | (children().count() > id.count())
Mappings
  • rim: n/a
  • v2: CE/CNE/CWE
  • rim: CD
  • orim: fhir:CodeableConcept rdfs:subClassOf dt:CD
  • v2: CX.5
  • rim: Role.code or implied by context
ResearchSubject.identifier.system
ShortThe namespace for the identifier value
Definition

Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

Cardinality0..1
Typeuri
SummaryTrue
Requirements

There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

Comments

see http://en.wikipedia.org/wiki/Uniform_resource_identifier

ConditionsThe cardinality or value of this element may be affected by these constraints: ele-1
Constraints
  • ele-1: All FHIR elements must have a @value or children
    hasValue() | (children().count() > id.count())
ExamplesGeneral
http://www.acme.com/identifiers/patient
Mappings
  • rim: n/a
  • v2: CX.4 / EI-2-4
  • rim: II.root or Role.id.root
  • servd: ./IdentifierType
ResearchSubject.identifier.value
ShortThe value that is unique
Definition

The portion of the identifier typically relevant to the user and which is unique within the context of the system.

Cardinality1..1
Typestring
SummaryTrue
Comments

If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension.

ConditionsThe cardinality or value of this element may be affected by these constraints: ele-1
Constraints
  • ele-1: All FHIR elements must have a @value or children
    hasValue() | (children().count() > id.count())
ExamplesGeneral
123456
Mappings
  • rim: n/a
  • v2: CX.1 / EI.1
  • rim: II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root)
  • servd: ./Value
ResearchSubject.identifier.period
ShortTime period when id is/was valid for use
Definition

Time period during which identifier is/was valid for use.

Cardinality0..0
TypePeriod
SummaryTrue
Comments

This is not a duration - that's a measure of time (a separate type), but a duration that occurs at a fixed value of time. A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). If duration is required, specify the type as Interval|Duration.

ConditionsThe cardinality or value of this element may be affected by these constraints: ele-1
Constraints
  • ele-1: All FHIR elements must have a @value or children
    hasValue() | (children().count() > id.count())
  • per-1: If present, start SHALL have a lower value than end
    start.empty() or end.empty() or (start <= end)
Mappings
  • rim: n/a
  • v2: DR
  • rim: IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"]
  • v2: CX.7 + CX.8
  • rim: Role.effectiveTime or implied by context
  • servd: ./StartDate and ./EndDate
ResearchSubject.identifier.assigner
ShortOrganization that issued id (may be just text)
Definition

Organization that issued/manages the identifier.

Cardinality0..0
TypeReference(Organization)
SummaryTrue
Comments

The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.

ConditionsThe cardinality or value of this element may be affected by these constraints: ele-1
Constraints
  • ele-1: All FHIR elements must have a @value or children
    hasValue() | (children().count() > id.count())
  • ref-1: SHALL have a contained resource if a local reference is provided
    reference.startsWith('#').not() or (reference.substring(1).trace('url') in %resource.contained.id.trace('ids'))
Mappings
  • rim: n/a
  • rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity)
  • v2: CX.4 / (CX.4,CX.9,CX.10)
  • rim: II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper
  • servd: ./IdentifierIssuingAuthority
ResearchSubject.status
Shortcandidate | enrolled | active | suspended | withdrawn | completed
Definition

The current state of the subject.

Cardinality1..1
Typecode
Binding

Indicates the progression of a study subject through a study

ResearchSubjectStatus (required)

ModifierTrue
SummaryTrue
Comments

This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid.

ConditionsThe cardinality or value of this element may be affected by these constraints: ele-1
Constraints
  • ele-1: All FHIR elements must have a @value or children
    hasValue() | (children().count() > id.count())
Mappings
  • rim: n/a
  • rim: .status
  • w5: status
ResearchSubject.period
ShortStart and end of participation
Definition

The dates the subject began and ended their participation in the study.

Cardinality0..0
TypePeriod
SummaryTrue
Aliastiming
Comments

This is not a duration - that's a measure of time (a separate type), but a duration that occurs at a fixed value of time. A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). If duration is required, specify the type as Interval|Duration.

ConditionsThe cardinality or value of this element may be affected by these constraints: ele-1
Constraints
  • ele-1: All FHIR elements must have a @value or children
    hasValue() | (children().count() > id.count())
  • per-1: If present, start SHALL have a lower value than end
    start.empty() or end.empty() or (start <= end)
Mappings
  • rim: n/a
  • v2: DR
  • rim: IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"]
  • w5: when.planned
ResearchSubject.study
ShortStudy subject is part of
Definition

Reference to the study the subject is participating in.

Cardinality1..1
TypeReference(ResearchStudy)
SummaryTrue
Comments

References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.

ConditionsThe cardinality or value of this element may be affected by these constraints: ele-1
Constraints
  • ele-1: All FHIR elements must have a @value or children
    hasValue() | (children().count() > id.count())
  • ref-1: SHALL have a contained resource if a local reference is provided
    reference.startsWith('#').not() or (reference.substring(1).trace('url') in %resource.contained.id.trace('ids'))
Mappings
  • rim: n/a
  • rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity)
ResearchSubject.individual
ShortWho is part of study
Definition

The record of the person or animal who is involved in the study.

Cardinality1..1
TypeReference(Patient)
SummaryTrue
Comments

References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.

ConditionsThe cardinality or value of this element may be affected by these constraints: ele-1
Constraints
  • ele-1: All FHIR elements must have a @value or children
    hasValue() | (children().count() > id.count())
  • ref-1: SHALL have a contained resource if a local reference is provided
    reference.startsWith('#').not() or (reference.substring(1).trace('url') in %resource.contained.id.trace('ids'))
Mappings
  • rim: n/a
  • rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity)
ResearchSubject.assignedArm
ShortWhat path should be followed
Definition

The name of the arm in the study the subject is expected to follow as part of this study.

Cardinality0..0
Typestring
Comments

Note that FHIR strings may not exceed 1MB in size

ConditionsThe cardinality or value of this element may be affected by these constraints: ele-1
Constraints
  • ele-1: All FHIR elements must have a @value or children
    hasValue() | (children().count() > id.count())
Mappings
  • rim: n/a
ResearchSubject.actualArm
ShortWhat path was followed
Definition

The name of the arm in the study the subject actually followed as part of this study.

Cardinality0..0
Typestring
Comments

Note that FHIR strings may not exceed 1MB in size

ConditionsThe cardinality or value of this element may be affected by these constraints: ele-1
Constraints
  • ele-1: All FHIR elements must have a @value or children
    hasValue() | (children().count() > id.count())
Mappings
  • rim: n/a
ResearchSubject.consent
ShortAgreement to participate in study
Definition

A record of the patient's informed agreement to participate in the study.

Cardinality0..0
TypeReference(Consent)
Comments

References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.

ConditionsThe cardinality or value of this element may be affected by these constraints: ele-1
Constraints
  • ele-1: All FHIR elements must have a @value or children
    hasValue() | (children().count() > id.count())
  • ref-1: SHALL have a contained resource if a local reference is provided
    reference.startsWith('#').not() or (reference.substring(1).trace('url') in %resource.contained.id.trace('ids'))
Mappings
  • rim: n/a
  • rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity)

Table

The below section shows a table view of the resource

ResearchSubject0..*
ResearchSubject.idid0..1
ResearchSubject.metaMeta0..1
ResearchSubject.implicitRulesuri0..1
ResearchSubject.languagecode0..1
ResearchSubject.textNarrative0..1
ResearchSubject.containedResource0..*
ResearchSubject.extensionExtension0..*
ResearchSubject.modifierExtensionExtension0..*
ResearchSubject.identifierIdentifier1..1
ResearchSubject.identifier.idstring0..1
ResearchSubject.identifier.extensionExtension0..*
ResearchSubject.identifier.usecode0..1
ResearchSubject.identifier.typeCodeableConcept0..1
ResearchSubject.identifier.systemuri0..1
ResearchSubject.identifier.valuestring1..1
ResearchSubject.identifier.periodPeriod0..0
ResearchSubject.identifier.assignerReference(Organization)0..0
ResearchSubject.statuscode1..1
ResearchSubject.periodPeriod0..0
ResearchSubject.studyReference(ResearchStudy)1..1
ResearchSubject.individualReference(Patient)1..1
ResearchSubject.assignedArmstring0..0
ResearchSubject.actualArmstring0..0
ResearchSubject.consentReference(Consent)0..0

XML

The below section has the structure definition in XML format

<StructureDefinition xmlns="http://hl7.org/fhir">
<id value="82b2d898-6459-44ce-a763-fa53dc5d1f9a" />
<url value="http://roche.com/fhir/rdc/StructureDefinition/researchsubject" />
<name value="researchsubject" />
<status value="active" />
<fhirVersion value="3.0.2" />
<kind value="resource" />
<abstract value="false" />
<type value="ResearchSubject" />
<baseDefinition value="http://hl7.org/fhir/StructureDefinition/ResearchSubject" />
<derivation value="constraint" />
<element id="ResearchSubject">
<path value="ResearchSubject" />
<short value="Investigation to increase healthcare-related patient-independent knowledge" />
<definition value="A process where a researcher or organization plans and then executes a series of steps intended to increase the field of healthcare-related knowledge. This includes studies of safety, efficacy, comparative effectiveness and other information about medications, devices, therapies and other interventional and investigative techniques. A ResearchStudy involves the gathering of information about human or animal subjects." />
<comment value="Need to make sure we encompass public health studies." />
<alias value="Study Subject" />
<min value="0" />
<max value="*" />
<path value="Resource" />
<min value="0" />
<max value="*" />
</base>
<key value="dom-2" />
<severity value="error" />
<human value="If the resource is contained in another resource, it SHALL NOT contain nested Resources" />
<expression value="contained.contained.empty()" />
<xpath value="not(parent::f:contained and f:contained)" />
</constraint>
<key value="dom-1" />
<severity value="error" />
<human value="If the resource is contained in another resource, it SHALL NOT contain any narrative" />
<expression value="contained.text.empty()" />
<xpath value="not(parent::f:contained and f:text)" />
</constraint>
<key value="dom-4" />
<severity value="error" />
<human value="If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated" />
<expression value="contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()" />
<xpath value="not(exists(f:contained/*/f:meta/f:versionId)) and not(exists(f:contained/*/f:meta/f:lastUpdated))" />
</constraint>
<key value="dom-3" />
<severity value="error" />
<human value="If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource" />
<expression value="contained.where(('#'+id in %resource.descendants().reference).not()).empty()" />
<xpath value="not(exists(for $id in f:contained/*/@id return $id[not(ancestor::f:contained/parent::*/descendant::f:reference/@value=concat('#', $id))]))" />
</constraint>
<identity value="rim" />
<map value="Entity. Role, or Act" />
</mapping>
<identity value="v2" />
<map value="OBX" />
</mapping>
<identity value="rim" />
<map value="Observation[classCode=CLNTRL, moodCode=EVN]" />
</mapping>
<identity value="w5" />
<map value="clinical.diagnostics" />
</mapping>
</element>
<element id="ResearchSubject.id">
<path value="ResearchSubject.id" />
<short value="Logical id of this artifact" />
<definition value="The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes." />
<comment value="The only time that a resource does not have an id is when it is being submitted to the server using a create operation." />
<min value="0" />
<max value="1" />
<path value="Resource.id" />
<min value="0" />
<max value="1" />
</base>
<code value="id" />
</type>
<condition value="ele-1" />
<key value="ele-1" />
<severity value="error" />
<human value="All FHIR elements must have a @value or children" />
<expression value="hasValue() | (children().count() > id.count())" />
<xpath value="@value|f:*|h:div" />
</constraint>
<isSummary value="true" />
<identity value="rim" />
<map value="n/a" />
</mapping>
</element>
<element id="ResearchSubject.meta">
<path value="ResearchSubject.meta" />
<short value="Metadata about the resource" />
<definition value="The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content may not always be associated with version changes to the resource." />
<min value="0" />
<max value="1" />
<path value="Resource.meta" />
<min value="0" />
<max value="1" />
</base>
<code value="Meta" />
</type>
<condition value="ele-1" />
<key value="ele-1" />
<severity value="error" />
<human value="All FHIR elements must have a @value or children" />
<expression value="hasValue() | (children().count() > id.count())" />
<xpath value="@value|f:*|h:div" />
</constraint>
<isSummary value="true" />
<identity value="rim" />
<map value="n/a" />
</mapping>
<identity value="rim" />
<map value="N/A" />
</mapping>
</element>
<element id="ResearchSubject.implicitRules">
<path value="ResearchSubject.implicitRules" />
<short value="A set of rules under which this content was created" />
<definition value="A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content." />
<comment value="Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. \n\nThis element is labelled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation." />
<min value="0" />
<max value="1" />
<path value="Resource.implicitRules" />
<min value="0" />
<max value="1" />
</base>
<code value="uri" />
</type>
<condition value="ele-1" />
<key value="ele-1" />
<severity value="error" />
<human value="All FHIR elements must have a @value or children" />
<expression value="hasValue() | (children().count() > id.count())" />
<xpath value="@value|f:*|h:div" />
</constraint>
<isModifier value="true" />
<isSummary value="true" />
<identity value="rim" />
<map value="n/a" />
</mapping>
</element>
<element id="ResearchSubject.language">
<path value="ResearchSubject.language" />
<short value="Language of the resource content" />
<definition value="The base language in which the resource is written." />
<comment value="Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute)." />
<min value="0" />
<max value="1" />
<path value="Resource.language" />
<min value="0" />
<max value="1" />
</base>
<code value="code" />
</type>
<condition value="ele-1" />
<key value="ele-1" />
<severity value="error" />
<human value="All FHIR elements must have a @value or children" />
<expression value="hasValue() | (children().count() > id.count())" />
<xpath value="@value|f:*|h:div" />
</constraint>
<extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-maxValueSet">
<reference value="http://hl7.org/fhir/ValueSet/all-languages" />
</valueReference>
</extension>
<extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
<valueString value="Language" />
</extension>
<extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-isCommonBinding">
<valueBoolean value="true" />
</extension>
<strength value="extensible" />
<description value="A human language." />
<reference value="http://hl7.org/fhir/ValueSet/languages" />
</valueSetReference>
</binding>
<identity value="rim" />
<map value="n/a" />
</mapping>
</element>
<element id="ResearchSubject.text">
<path value="ResearchSubject.text" />
<short value="Text summary of the resource, for human interpretation" />
<definition value="A human-readable narrative that contains a summary of the resource, and may be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety." />
<comment value="Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded in formation is added later." />
<alias value="narrative" />
<alias value="html" />
<alias value="xhtml" />
<alias value="display" />
<min value="0" />
<max value="1" />
<path value="DomainResource.text" />
<min value="0" />
<max value="1" />
</base>
<code value="Narrative" />
</type>
<condition value="ele-1" />
<condition value="dom-1" />
<key value="ele-1" />
<severity value="error" />
<human value="All FHIR elements must have a @value or children" />
<expression value="hasValue() | (children().count() > id.count())" />
<xpath value="@value|f:*|h:div" />
</constraint>
<identity value="rim" />
<map value="n/a" />
</mapping>
<identity value="rim" />
<map value="N/A" />
</mapping>
<identity value="rim" />
<map value="Act.text?" />
</mapping>
</element>
<element id="ResearchSubject.contained">
<path value="ResearchSubject.contained" />
<short value="Contained, inline Resources" />
<definition value="These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope." />
<comment value="This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again." />
<alias value="inline resources" />
<alias value="anonymous resources" />
<alias value="contained resources" />
<min value="0" />
<max value="*" />
<path value="DomainResource.contained" />
<min value="0" />
<max value="*" />
</base>
<code value="Resource" />
</type>
<identity value="rim" />
<map value="Entity. Role, or Act" />
</mapping>
<identity value="rim" />
<map value="N/A" />
</mapping>
</element>
<element id="ResearchSubject.extension">
<path value="ResearchSubject.extension" />
<type value="value" />
<path value="url" />
</discriminator>
<description value="Extensions are always sliced by (at least) url" />
<rules value="open" />
</slicing>
<short value="Additional Content defined by implementations" />
<definition value="May be used to represent additional information that is not part of the basic definition of the resource. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
<comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
<alias value="extensions" />
<alias value="user content" />
<min value="0" />
<max value="*" />
<path value="DomainResource.extension" />
<min value="0" />
<max value="*" />
</base>
<code value="Extension" />
</type>
<condition value="ele-1" />
<key value="ele-1" />
<severity value="error" />
<human value="All FHIR elements must have a @value or children" />
<expression value="hasValue() | (children().count() > id.count())" />
<xpath value="@value|f:*|h:div" />
</constraint>
<key value="ext-1" />
<severity value="error" />
<human value="Must have either extensions or value[x], not both" />
<expression value="extension.exists() != value.exists()" />
<xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
</constraint>
<identity value="rim" />
<map value="n/a" />
</mapping>
<identity value="rim" />
<map value="N/A" />
</mapping>
</element>
<element id="ResearchSubject.modifierExtension">
<path value="ResearchSubject.modifierExtension" />
<type value="value" />
<path value="url" />
</discriminator>
<description value="Extensions are always sliced by (at least) url" />
<rules value="open" />
</slicing>
<short value="Extensions that cannot be ignored" />
<definition value="May be used to represent additional information that is not part of the basic definition of the resource, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions." />
<comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
<alias value="extensions" />
<alias value="user content" />
<min value="0" />
<max value="*" />
<path value="DomainResource.modifierExtension" />
<min value="0" />
<max value="*" />
</base>
<code value="Extension" />
</type>
<condition value="ele-1" />
<key value="ele-1" />
<severity value="error" />
<human value="All FHIR elements must have a @value or children" />
<expression value="hasValue() | (children().count() > id.count())" />
<xpath value="@value|f:*|h:div" />
</constraint>
<key value="ext-1" />
<severity value="error" />
<human value="Must have either extensions or value[x], not both" />
<expression value="extension.exists() != value.exists()" />
<xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
</constraint>
<isModifier value="true" />
<identity value="rim" />
<map value="n/a" />
</mapping>
<identity value="rim" />
<map value="N/A" />
</mapping>
</element>
<element id="ResearchSubject.identifier">
<path value="ResearchSubject.identifier" />
<short value="Business Identifier for research subject" />
<definition value="Identifiers assigned to this research study by the sponsor or other systems." />
<requirements value="Allows identification of the research study as it is known by various participating systems and in a way that remains consistent across servers." />
<min value="1" />
<max value="1" />
<path value="ResearchSubject.identifier" />
<min value="0" />
<max value="1" />
</base>
<code value="Identifier" />
</type>
<condition value="ele-1" />
<key value="ele-1" />
<severity value="error" />
<human value="All FHIR elements must have a @value or children" />
<expression value="hasValue() | (children().count() > id.count())" />
<xpath value="@value|f:*|h:div" />
</constraint>
<isSummary value="true" />
<identity value="rim" />
<map value="n/a" />
</mapping>
<identity value="v2" />
<map value="CX / EI (occasionally, more often EI maps to a resource id or a URL)" />
</mapping>
<identity value="rim" />
<map value="II - see see identifier pattern at http://wiki.hl7.org/index.php?title=Common_Design_Patterns#Identifier_Pattern for relevant discussion. The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT]" />
</mapping>
<identity value="servd" />
<map value="Identifier" />
</mapping>
<identity value="rim" />
<map value=".identifier" />
</mapping>
<identity value="w5" />
<map value="id" />
</mapping>
</element>
<element id="ResearchSubject.identifier.id">
<path value="ResearchSubject.identifier.id" />
<representation value="xmlAttr" />
<short value="xml:id (or equivalent in JSON)" />
<definition value="unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." />
<comment value="Note that FHIR strings may not exceed 1MB in size" />
<min value="0" />
<max value="1" />
<path value="Element.id" />
<min value="0" />
<max value="1" />
</base>
<code value="string" />
</type>
<condition value="ele-1" />
<key value="ele-1" />
<severity value="error" />
<human value="All FHIR elements must have a @value or children" />
<expression value="hasValue() | (children().count() > id.count())" />
<xpath value="@value|f:*|h:div" />
</constraint>
<identity value="rim" />
<map value="n/a" />
</mapping>
</element>
<element id="ResearchSubject.identifier.extension">
<path value="ResearchSubject.identifier.extension" />
<type value="value" />
<path value="url" />
</discriminator>
<description value="Extensions are always sliced by (at least) url" />
<rules value="open" />
</slicing>
<short value="Additional Content defined by implementations" />
<definition value="May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
<comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
<alias value="extensions" />
<alias value="user content" />
<min value="0" />
<max value="*" />
<path value="Element.extension" />
<min value="0" />
<max value="*" />
</base>
<code value="Extension" />
</type>
<condition value="ele-1" />
<key value="ele-1" />
<severity value="error" />
<human value="All FHIR elements must have a @value or children" />
<expression value="hasValue() | (children().count() > id.count())" />
<xpath value="@value|f:*|h:div" />
</constraint>
<key value="ext-1" />
<severity value="error" />
<human value="Must have either extensions or value[x], not both" />
<expression value="extension.exists() != value.exists()" />
<xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
</constraint>
<identity value="rim" />
<map value="n/a" />
</mapping>
<identity value="rim" />
<map value="N/A" />
</mapping>
</element>
<element id="ResearchSubject.identifier.use">
<path value="ResearchSubject.identifier.use" />
<short value="usual | official | temp | secondary (If known)" />
<definition value="The purpose of this identifier." />
<comment value="This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one. Applications can assume that an identifier is permanent unless it explicitly says that it is temporary." />
<requirements value="Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers." />
<min value="0" />
<max value="1" />
<path value="Identifier.use" />
<min value="0" />
<max value="1" />
</base>
<code value="code" />
</type>
<condition value="ele-1" />
<key value="ele-1" />
<severity value="error" />
<human value="All FHIR elements must have a @value or children" />
<expression value="hasValue() | (children().count() > id.count())" />
<xpath value="@value|f:*|h:div" />
</constraint>
<isModifier value="true" />
<isSummary value="true" />
<extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
<valueString value="IdentifierUse" />
</extension>
<strength value="required" />
<description value="Identifies the purpose for this identifier, if known ." />
<reference value="http://hl7.org/fhir/ValueSet/identifier-use" />
</valueSetReference>
</binding>
<identity value="rim" />
<map value="n/a" />
</mapping>
<identity value="v2" />
<map value="N/A" />
</mapping>
<identity value="rim" />
<map value="Role.code or implied by context" />
</mapping>
</element>
<element id="ResearchSubject.identifier.type">
<path value="ResearchSubject.identifier.type" />
<short value="Description of identifier" />
<definition value="A coded type for the identifier that can be used to determine which identifier to use for a specific purpose." />
<comment value="This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. \n\nWhere the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type." />
<requirements value="Allows users to make use of identifiers when the identifier system is not known." />
<min value="0" />
<max value="1" />
<path value="Identifier.type" />
<min value="0" />
<max value="1" />
</base>
<code value="CodeableConcept" />
</type>
<condition value="ele-1" />
<key value="ele-1" />
<severity value="error" />
<human value="All FHIR elements must have a @value or children" />
<expression value="hasValue() | (children().count() > id.count())" />
<xpath value="@value|f:*|h:div" />
</constraint>
<isSummary value="true" />
<extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
<valueString value="IdentifierType" />
</extension>
<extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-isCommonBinding">
<valueBoolean value="true" />
</extension>
<strength value="extensible" />
<description value="A coded type for an identifier that can be used to determine which identifier to use for a specific purpose." />
<reference value="http://hl7.org/fhir/ValueSet/identifier-type" />
</valueSetReference>
</binding>
<identity value="rim" />
<map value="n/a" />
</mapping>
<identity value="v2" />
<map value="CE/CNE/CWE" />
</mapping>
<identity value="rim" />
<map value="CD" />
</mapping>
<identity value="orim" />
<map value="fhir:CodeableConcept rdfs:subClassOf dt:CD" />
</mapping>
<identity value="v2" />
<map value="CX.5" />
</mapping>
<identity value="rim" />
<map value="Role.code or implied by context" />
</mapping>
</element>
<element id="ResearchSubject.identifier.system">
<path value="ResearchSubject.identifier.system" />
<short value="The namespace for the identifier value" />
<definition value="Establishes the namespace for the value - that is, a URL that describes a set values that are unique." />
<comment value="see http://en.wikipedia.org/wiki/Uniform_resource_identifier" />
<requirements value="There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers." />
<min value="0" />
<max value="1" />
<path value="Identifier.system" />
<min value="0" />
<max value="1" />
</base>
<code value="uri" />
</type>
<label value="General" />
<valueUri value="http://www.acme.com/identifiers/patient" />
</example>
<condition value="ele-1" />
<key value="ele-1" />
<severity value="error" />
<human value="All FHIR elements must have a @value or children" />
<expression value="hasValue() | (children().count() > id.count())" />
<xpath value="@value|f:*|h:div" />
</constraint>
<isSummary value="true" />
<identity value="rim" />
<map value="n/a" />
</mapping>
<identity value="v2" />
<map value="CX.4 / EI-2-4" />
</mapping>
<identity value="rim" />
<map value="II.root or Role.id.root" />
</mapping>
<identity value="servd" />
<map value="./IdentifierType" />
</mapping>
</element>
<element id="ResearchSubject.identifier.value">
<path value="ResearchSubject.identifier.value" />
<short value="The value that is unique" />
<definition value="The portion of the identifier typically relevant to the user and which is unique within the context of the system." />
<comment value="If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the [Rendered Value extension](extension-rendered-value.html)." />
<min value="1" />
<max value="1" />
<path value="Identifier.value" />
<min value="0" />
<max value="1" />
</base>
<code value="string" />
</type>
<label value="General" />
<valueString value="123456" />
</example>
<condition value="ele-1" />
<key value="ele-1" />
<severity value="error" />
<human value="All FHIR elements must have a @value or children" />
<expression value="hasValue() | (children().count() > id.count())" />
<xpath value="@value|f:*|h:div" />
</constraint>
<isSummary value="true" />
<identity value="rim" />
<map value="n/a" />
</mapping>
<identity value="v2" />
<map value="CX.1 / EI.1" />
</mapping>
<identity value="rim" />
<map value="II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root)" />
</mapping>
<identity value="servd" />
<map value="./Value" />
</mapping>
</element>
<element id="ResearchSubject.identifier.period">
<path value="ResearchSubject.identifier.period" />
<short value="Time period when id is/was valid for use" />
<definition value="Time period during which identifier is/was valid for use." />
<comment value="This is not a duration - that's a measure of time (a separate type), but a duration that occurs at a fixed value of time. A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). If duration is required, specify the type as Interval|Duration." />
<min value="0" />
<max value="0" />
<path value="Identifier.period" />
<min value="0" />
<max value="1" />
</base>
<code value="Period" />
</type>
<condition value="ele-1" />
<key value="ele-1" />
<severity value="error" />
<human value="All FHIR elements must have a @value or children" />
<expression value="hasValue() | (children().count() > id.count())" />
<xpath value="@value|f:*|h:div" />
</constraint>
<key value="per-1" />
<severity value="error" />
<human value="If present, start SHALL have a lower value than end" />
<expression value="start.empty() or end.empty() or (start <= end)" />
<xpath value="not(exists(f:start)) or not(exists(f:end)) or (f:start/@value <= f:end/@value)" />
</constraint>
<isSummary value="true" />
<identity value="rim" />
<map value="n/a" />
</mapping>
<identity value="v2" />
<map value="DR" />
</mapping>
<identity value="rim" />
<map value="IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"]" />
</mapping>
<identity value="v2" />
<map value="CX.7 + CX.8" />
</mapping>
<identity value="rim" />
<map value="Role.effectiveTime or implied by context" />
</mapping>
<identity value="servd" />
<map value="./StartDate and ./EndDate" />
</mapping>
</element>
<element id="ResearchSubject.identifier.assigner">
<path value="ResearchSubject.identifier.assigner" />
<short value="Organization that issued id (may be just text)" />
<definition value="Organization that issued/manages the identifier." />
<comment value="The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization." />
<min value="0" />
<max value="0" />
<path value="Identifier.assigner" />
<min value="0" />
<max value="1" />
</base>
<code value="Reference" />
<targetProfile value="http://hl7.org/fhir/StructureDefinition/Organization" />
</type>
<condition value="ele-1" />
<key value="ele-1" />
<severity value="error" />
<human value="All FHIR elements must have a @value or children" />
<expression value="hasValue() | (children().count() > id.count())" />
<xpath value="@value|f:*|h:div" />
</constraint>
<key value="ref-1" />
<severity value="error" />
<human value="SHALL have a contained resource if a local reference is provided" />
<expression value="reference.startsWith('#').not() or (reference.substring(1).trace('url') in %resource.contained.id.trace('ids'))" />
<xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" />
</constraint>
<isSummary value="true" />
<identity value="rim" />
<map value="n/a" />
</mapping>
<identity value="rim" />
<map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" />
</mapping>
<identity value="v2" />
<map value="CX.4 / (CX.4,CX.9,CX.10)" />
</mapping>
<identity value="rim" />
<map value="II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper" />
</mapping>
<identity value="servd" />
<map value="./IdentifierIssuingAuthority" />
</mapping>
</element>
<element id="ResearchSubject.status">
<path value="ResearchSubject.status" />
<short value="candidate | enrolled | active | suspended | withdrawn | completed" />
<definition value="The current state of the subject." />
<comment value="This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid." />
<min value="1" />
<max value="1" />
<path value="ResearchSubject.status" />
<min value="1" />
<max value="1" />
</base>
<code value="code" />
</type>
<condition value="ele-1" />
<key value="ele-1" />
<severity value="error" />
<human value="All FHIR elements must have a @value or children" />
<expression value="hasValue() | (children().count() > id.count())" />
<xpath value="@value|f:*|h:div" />
</constraint>
<isModifier value="true" />
<isSummary value="true" />
<extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
<valueString value="ResearchSubjectStatus" />
</extension>
<strength value="required" />
<description value="Indicates the progression of a study subject through a study" />
<reference value="http://hl7.org/fhir/ValueSet/research-subject-status" />
</valueSetReference>
</binding>
<identity value="rim" />
<map value="n/a" />
</mapping>
<identity value="rim" />
<map value=".status" />
</mapping>
<identity value="w5" />
<map value="status" />
</mapping>
</element>
<element id="ResearchSubject.period">
<path value="ResearchSubject.period" />
<short value="Start and end of participation" />
<definition value="The dates the subject began and ended their participation in the study." />
<comment value="This is not a duration - that's a measure of time (a separate type), but a duration that occurs at a fixed value of time. A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). If duration is required, specify the type as Interval|Duration." />
<alias value="timing" />
<min value="0" />
<max value="0" />
<path value="ResearchSubject.period" />
<min value="0" />
<max value="1" />
</base>
<code value="Period" />
</type>
<condition value="ele-1" />
<key value="ele-1" />
<severity value="error" />
<human value="All FHIR elements must have a @value or children" />
<expression value="hasValue() | (children().count() > id.count())" />
<xpath value="@value|f:*|h:div" />
</constraint>
<key value="per-1" />
<severity value="error" />
<human value="If present, start SHALL have a lower value than end" />
<expression value="start.empty() or end.empty() or (start <= end)" />
<xpath value="not(exists(f:start)) or not(exists(f:end)) or (f:start/@value <= f:end/@value)" />
</constraint>
<isSummary value="true" />
<identity value="rim" />
<map value="n/a" />
</mapping>
<identity value="v2" />
<map value="DR" />
</mapping>
<identity value="rim" />
<map value="IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"]" />
</mapping>
<identity value="w5" />
<map value="when.planned" />
</mapping>
</element>
<element id="ResearchSubject.study">
<path value="ResearchSubject.study" />
<short value="Study subject is part of" />
<definition value="Reference to the study the subject is participating in." />
<comment value="References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository." />
<min value="1" />
<max value="1" />
<path value="ResearchSubject.study" />
<min value="1" />
<max value="1" />
</base>
<code value="Reference" />
<targetProfile value="http://hl7.org/fhir/StructureDefinition/ResearchStudy" />
</type>
<condition value="ele-1" />
<key value="ele-1" />
<severity value="error" />
<human value="All FHIR elements must have a @value or children" />
<expression value="hasValue() | (children().count() > id.count())" />
<xpath value="@value|f:*|h:div" />
</constraint>
<key value="ref-1" />
<severity value="error" />
<human value="SHALL have a contained resource if a local reference is provided" />
<expression value="reference.startsWith('#').not() or (reference.substring(1).trace('url') in %resource.contained.id.trace('ids'))" />
<xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" />
</constraint>
<isSummary value="true" />
<identity value="rim" />
<map value="n/a" />
</mapping>
<identity value="rim" />
<map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" />
</mapping>
</element>
<element id="ResearchSubject.individual">
<path value="ResearchSubject.individual" />
<short value="Who is part of study" />
<definition value="The record of the person or animal who is involved in the study." />
<comment value="References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository." />
<min value="1" />
<max value="1" />
<path value="ResearchSubject.individual" />
<min value="1" />
<max value="1" />
</base>
<code value="Reference" />
<targetProfile value="http://hl7.org/fhir/StructureDefinition/Patient" />
</type>
<condition value="ele-1" />
<key value="ele-1" />
<severity value="error" />
<human value="All FHIR elements must have a @value or children" />
<expression value="hasValue() | (children().count() > id.count())" />
<xpath value="@value|f:*|h:div" />
</constraint>
<key value="ref-1" />
<severity value="error" />
<human value="SHALL have a contained resource if a local reference is provided" />
<expression value="reference.startsWith('#').not() or (reference.substring(1).trace('url') in %resource.contained.id.trace('ids'))" />
<xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" />
</constraint>
<isSummary value="true" />
<identity value="rim" />
<map value="n/a" />
</mapping>
<identity value="rim" />
<map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" />
</mapping>
</element>
<element id="ResearchSubject.assignedArm">
<path value="ResearchSubject.assignedArm" />
<short value="What path should be followed" />
<definition value="The name of the arm in the study the subject is expected to follow as part of this study." />
<comment value="Note that FHIR strings may not exceed 1MB in size" />
<min value="0" />
<max value="0" />
<path value="ResearchSubject.assignedArm" />
<min value="0" />
<max value="1" />
</base>
<code value="string" />
</type>
<condition value="ele-1" />
<key value="ele-1" />
<severity value="error" />
<human value="All FHIR elements must have a @value or children" />
<expression value="hasValue() | (children().count() > id.count())" />
<xpath value="@value|f:*|h:div" />
</constraint>
<identity value="rim" />
<map value="n/a" />
</mapping>
</element>
<element id="ResearchSubject.actualArm">
<path value="ResearchSubject.actualArm" />
<short value="What path was followed" />
<definition value="The name of the arm in the study the subject actually followed as part of this study." />
<comment value="Note that FHIR strings may not exceed 1MB in size" />
<min value="0" />
<max value="0" />
<path value="ResearchSubject.actualArm" />
<min value="0" />
<max value="1" />
</base>
<code value="string" />
</type>
<condition value="ele-1" />
<key value="ele-1" />
<severity value="error" />
<human value="All FHIR elements must have a @value or children" />
<expression value="hasValue() | (children().count() > id.count())" />
<xpath value="@value|f:*|h:div" />
</constraint>
<identity value="rim" />
<map value="n/a" />
</mapping>
</element>
<element id="ResearchSubject.consent">
<path value="ResearchSubject.consent" />
<short value="Agreement to participate in study" />
<definition value="A record of the patient's informed agreement to participate in the study." />
<comment value="References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository." />
<min value="0" />
<max value="0" />
<path value="ResearchSubject.consent" />
<min value="0" />
<max value="1" />
</base>
<code value="Reference" />
<targetProfile value="http://hl7.org/fhir/StructureDefinition/Consent" />
</type>
<condition value="ele-1" />
<key value="ele-1" />
<severity value="error" />
<human value="All FHIR elements must have a @value or children" />
<expression value="hasValue() | (children().count() > id.count())" />
<xpath value="@value|f:*|h:div" />
</constraint>
<key value="ref-1" />
<severity value="error" />
<human value="SHALL have a contained resource if a local reference is provided" />
<expression value="reference.startsWith('#').not() or (reference.substring(1).trace('url') in %resource.contained.id.trace('ids'))" />
<xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" />
</constraint>
<identity value="rim" />
<map value="n/a" />
</mapping>
<identity value="rim" />
<map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" />
</mapping>
</element>
</snapshot>
<element id="ResearchSubject.identifier">
<path value="ResearchSubject.identifier" />
<min value="1" />
</element>
<element id="ResearchSubject.identifier.value">
<path value="ResearchSubject.identifier.value" />
<min value="1" />
</element>
<element id="ResearchSubject.identifier.period">
<path value="ResearchSubject.identifier.period" />
<max value="0" />
</element>
<element id="ResearchSubject.identifier.assigner">
<path value="ResearchSubject.identifier.assigner" />
<max value="0" />
</element>
<element id="ResearchSubject.period">
<path value="ResearchSubject.period" />
<max value="0" />
</element>
<element id="ResearchSubject.assignedArm">
<path value="ResearchSubject.assignedArm" />
<max value="0" />
</element>
<element id="ResearchSubject.actualArm">
<path value="ResearchSubject.actualArm" />
<max value="0" />
</element>
<element id="ResearchSubject.consent">
<path value="ResearchSubject.consent" />
<max value="0" />
</element>
</differential>
</StructureDefinition>

JSON

The below section has the structure definition in JSON format

{
"resourceType": "StructureDefinition",
"id": "82b2d898-6459-44ce-a763-fa53dc5d1f9a",
"url": "http://roche.com/fhir/rdc/StructureDefinition/researchsubject",
"name": "researchsubject",
"status": "active",
"fhirVersion": "3.0.2",
"kind": "resource",
"abstract": false,
"type": "ResearchSubject",
"baseDefinition": "http://hl7.org/fhir/StructureDefinition/ResearchSubject",
"derivation": "constraint",
"element": [
{
"id": "ResearchSubject",
"path": "ResearchSubject",
"short": "Investigation to increase healthcare-related patient-independent knowledge",
"definition": "A process where a researcher or organization plans and then executes a series of steps intended to increase the field of healthcare-related knowledge. This includes studies of safety, efficacy, comparative effectiveness and other information about medications, devices, therapies and other interventional and investigative techniques. A ResearchStudy involves the gathering of information about human or animal subjects.",
"comment": "Need to make sure we encompass public health studies.",
"alias": [
"Study Subject"
],
"min": 0,
"max": "*",
"base": {
"path": "Resource",
"min": 0,
"max": "*"
},
{
"key": "dom-2",
"severity": "error",
"human": "If the resource is contained in another resource, it SHALL NOT contain nested Resources",
"expression": "contained.contained.empty()",
"xpath": "not(parent::f:contained and f:contained)"
},
{
"key": "dom-1",
"severity": "error",
"human": "If the resource is contained in another resource, it SHALL NOT contain any narrative",
"expression": "contained.text.empty()",
"xpath": "not(parent::f:contained and f:text)"
},
{
"key": "dom-4",
"severity": "error",
"human": "If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated",
"expression": "contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()",
"xpath": "not(exists(f:contained/*/f:meta/f:versionId)) and not(exists(f:contained/*/f:meta/f:lastUpdated))"
},
{
"key": "dom-3",
"severity": "error",
"human": "If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource",
"expression": "contained.where(('#'+id in %resource.descendants().reference).not()).empty()",
"xpath": "not(exists(for $id in f:contained/*/@id return $id[not(ancestor::f:contained/parent::*/descendant::f:reference/@value=concat('#', $id))]))"
}
],
"mapping": [
{
"identity": "rim",
"map": "Entity. Role, or Act"
},
{
"identity": "v2",
"map": "OBX"
},
{
"identity": "rim",
"map": "Observation[classCode=CLNTRL, moodCode=EVN]"
},
{
"identity": "w5",
"map": "clinical.diagnostics"
}
]
},
{
"id": "ResearchSubject.id",
"path": "ResearchSubject.id",
"short": "Logical id of this artifact",
"definition": "The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.",
"comment": "The only time that a resource does not have an id is when it is being submitted to the server using a create operation.",
"min": 0,
"max": "1",
"base": {
"path": "Resource.id",
"min": 0,
"max": "1"
},
"type": [
{
"code": "id"
}
],
"ele-1"
],
{
"key": "ele-1",
"severity": "error",
"human": "All FHIR elements must have a @value or children",
"expression": "hasValue() | (children().count() > id.count())",
"xpath": "@value|f:*|h:div"
}
],
"isSummary": true,
"mapping": [
{
"identity": "rim",
"map": "n/a"
}
]
},
{
"id": "ResearchSubject.meta",
"path": "ResearchSubject.meta",
"short": "Metadata about the resource",
"definition": "The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content may not always be associated with version changes to the resource.",
"min": 0,
"max": "1",
"base": {
"path": "Resource.meta",
"min": 0,
"max": "1"
},
"type": [
{
"code": "Meta"
}
],
"ele-1"
],
{
"key": "ele-1",
"severity": "error",
"human": "All FHIR elements must have a @value or children",
"expression": "hasValue() | (children().count() > id.count())",
"xpath": "@value|f:*|h:div"
}
],
"isSummary": true,
"mapping": [
{
"identity": "rim",
"map": "n/a"
},
{
"identity": "rim",
"map": "N/A"
}
]
},
{
"id": "ResearchSubject.implicitRules",
"path": "ResearchSubject.implicitRules",
"short": "A set of rules under which this content was created",
"definition": "A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content.",
"comment": "Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. \n\nThis element is labelled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation.",
"min": 0,
"max": "1",
"base": {
"path": "Resource.implicitRules",
"min": 0,
"max": "1"
},
"type": [
{
"code": "uri"
}
],
"ele-1"
],
{
"key": "ele-1",
"severity": "error",
"human": "All FHIR elements must have a @value or children",
"expression": "hasValue() | (children().count() > id.count())",
"xpath": "@value|f:*|h:div"
}
],
"isModifier": true,
"isSummary": true,
"mapping": [
{
"identity": "rim",
"map": "n/a"
}
]
},
{
"id": "ResearchSubject.language",
"path": "ResearchSubject.language",
"short": "Language of the resource content",
"definition": "The base language in which the resource is written.",
"comment": "Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).",
"min": 0,
"max": "1",
"base": {
"path": "Resource.language",
"min": 0,
"max": "1"
},
"type": [
{
"code": "code"
}
],
"ele-1"
],
{
"key": "ele-1",
"severity": "error",
"human": "All FHIR elements must have a @value or children",
"expression": "hasValue() | (children().count() > id.count())",
"xpath": "@value|f:*|h:div"
}
],
"binding": {
{
"url": "http://hl7.org/fhir/StructureDefinition/elementdefinition-maxValueSet",
"reference": "http://hl7.org/fhir/ValueSet/all-languages"
}
},
{
"url": "http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName",
"valueString": "Language"
},
{
"url": "http://hl7.org/fhir/StructureDefinition/elementdefinition-isCommonBinding",
"valueBoolean": true
}
],
"strength": "extensible",
"description": "A human language.",
"reference": "http://hl7.org/fhir/ValueSet/languages"
}
},
"mapping": [
{
"identity": "rim",
"map": "n/a"
}
]
},
{
"id": "ResearchSubject.text",
"path": "ResearchSubject.text",
"short": "Text summary of the resource, for human interpretation",
"definition": "A human-readable narrative that contains a summary of the resource, and may be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it \"clinically safe\" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.",
"comment": "Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a \"text blob\" or where text is additionally entered raw or narrated and encoded in formation is added later.",
"alias": [
"narrative",
"html",
"xhtml",
"display"
],
"min": 0,
"max": "1",
"base": {
"path": "DomainResource.text",
"min": 0,
"max": "1"
},
"type": [
{
"code": "Narrative"
}
],
"ele-1",
"dom-1"
],
{
"key": "ele-1",
"severity": "error",
"human": "All FHIR elements must have a @value or children",
"expression": "hasValue() | (children().count() > id.count())",
"xpath": "@value|f:*|h:div"
}
],
"mapping": [
{
"identity": "rim",
"map": "n/a"
},
{
"identity": "rim",
"map": "N/A"
},
{
"identity": "rim",
"map": "Act.text?"
}
]
},
{
"id": "ResearchSubject.contained",
"path": "ResearchSubject.contained",
"short": "Contained, inline Resources",
"definition": "These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.",
"comment": "This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again.",
"alias": [
"inline resources",
"anonymous resources",
"contained resources"
],
"min": 0,
"max": "*",
"base": {
"path": "DomainResource.contained",
"min": 0,
"max": "*"
},
"type": [
{
"code": "Resource"
}
],
"mapping": [
{
"identity": "rim",
"map": "Entity. Role, or Act"
},
{
"identity": "rim",
"map": "N/A"
}
]
},
{
"id": "ResearchSubject.extension",
"path": "ResearchSubject.extension",
"slicing": {
{
"type": "value",
"path": "url"
}
],
"description": "Extensions are always sliced by (at least) url",
"rules": "open"
},
"short": "Additional Content defined by implementations",
"definition": "May be used to represent additional information that is not part of the basic definition of the resource. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.",
"comment": "There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.",
"alias": [
"extensions",
"user content"
],
"min": 0,
"max": "*",
"base": {
"path": "DomainResource.extension",
"min": 0,
"max": "*"
},
"type": [
{
"code": "Extension"
}
],
"ele-1"
],
{
"key": "ele-1",
"severity": "error",
"human": "All FHIR elements must have a @value or children",
"expression": "hasValue() | (children().count() > id.count())",
"xpath": "@value|f:*|h:div"
},
{
"key": "ext-1",
"severity": "error",
"human": "Must have either extensions or value[x], not both",
"expression": "extension.exists() != value.exists()",
"xpath": "exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])"
}
],
"mapping": [
{
"identity": "rim",
"map": "n/a"
},
{
"identity": "rim",
"map": "N/A"
}
]
},
{
"id": "ResearchSubject.modifierExtension",
"path": "ResearchSubject.modifierExtension",
"slicing": {
{
"type": "value",
"path": "url"
}
],
"description": "Extensions are always sliced by (at least) url",
"rules": "open"
},
"short": "Extensions that cannot be ignored",
"definition": "May be used to represent additional information that is not part of the basic definition of the resource, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.",
"comment": "There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.",
"alias": [
"extensions",
"user content"
],
"min": 0,
"max": "*",
"base": {
"path": "DomainResource.modifierExtension",
"min": 0,
"max": "*"
},
"type": [
{
"code": "Extension"
}
],
"ele-1"
],
{
"key": "ele-1",
"severity": "error",
"human": "All FHIR elements must have a @value or children",
"expression": "hasValue() | (children().count() > id.count())",
"xpath": "@value|f:*|h:div"
},
{
"key": "ext-1",
"severity": "error",
"human": "Must have either extensions or value[x], not both",
"expression": "extension.exists() != value.exists()",
"xpath": "exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])"
}
],
"isModifier": true,
"mapping": [
{
"identity": "rim",
"map": "n/a"
},
{
"identity": "rim",
"map": "N/A"
}
]
},
{
"id": "ResearchSubject.identifier",
"path": "ResearchSubject.identifier",
"short": "Business Identifier for research subject",
"definition": "Identifiers assigned to this research study by the sponsor or other systems.",
"requirements": "Allows identification of the research study as it is known by various participating systems and in a way that remains consistent across servers.",
"min": 1,
"max": "1",
"base": {
"path": "ResearchSubject.identifier",
"min": 0,
"max": "1"
},
"type": [
{
"code": "Identifier"
}
],
"ele-1"
],
{
"key": "ele-1",
"severity": "error",
"human": "All FHIR elements must have a @value or children",
"expression": "hasValue() | (children().count() > id.count())",
"xpath": "@value|f:*|h:div"
}
],
"isSummary": true,
"mapping": [
{
"identity": "rim",
"map": "n/a"
},
{
"identity": "v2",
"map": "CX / EI (occasionally, more often EI maps to a resource id or a URL)"
},
{
"identity": "rim",
"map": "II - see see identifier pattern at http://wiki.hl7.org/index.php?title=Common_Design_Patterns#Identifier_Pattern for relevant discussion. The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT]"
},
{
"identity": "servd",
"map": "Identifier"
},
{
"identity": "rim",
"map": ".identifier"
},
{
"identity": "w5",
"map": "id"
}
]
},
{
"id": "ResearchSubject.identifier.id",
"path": "ResearchSubject.identifier.id",
"xmlAttr"
],
"short": "xml:id (or equivalent in JSON)",
"definition": "unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.",
"comment": "Note that FHIR strings may not exceed 1MB in size",
"min": 0,
"max": "1",
"base": {
"path": "Element.id",
"min": 0,
"max": "1"
},
"type": [
{
"code": "string"
}
],
"ele-1"
],
{
"key": "ele-1",
"severity": "error",
"human": "All FHIR elements must have a @value or children",
"expression": "hasValue() | (children().count() > id.count())",
"xpath": "@value|f:*|h:div"
}
],
"mapping": [
{
"identity": "rim",
"map": "n/a"
}
]
},
{
"id": "ResearchSubject.identifier.extension",
"path": "ResearchSubject.identifier.extension",
"slicing": {
{
"type": "value",
"path": "url"
}
],
"description": "Extensions are always sliced by (at least) url",
"rules": "open"
},
"short": "Additional Content defined by implementations",
"definition": "May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.",
"comment": "There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.",
"alias": [
"extensions",
"user content"
],
"min": 0,
"max": "*",
"base": {
"path": "Element.extension",
"min": 0,
"max": "*"
},
"type": [
{
"code": "Extension"
}
],
"ele-1"
],
{
"key": "ele-1",
"severity": "error",
"human": "All FHIR elements must have a @value or children",
"expression": "hasValue() | (children().count() > id.count())",
"xpath": "@value|f:*|h:div"
},
{
"key": "ext-1",
"severity": "error",
"human": "Must have either extensions or value[x], not both",
"expression": "extension.exists() != value.exists()",
"xpath": "exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])"
}
],
"mapping": [
{
"identity": "rim",
"map": "n/a"
},
{
"identity": "rim",
"map": "N/A"
}
]
},
{
"id": "ResearchSubject.identifier.use",
"path": "ResearchSubject.identifier.use",
"short": "usual | official | temp | secondary (If known)",
"definition": "The purpose of this identifier.",
"comment": "This is labeled as \"Is Modifier\" because applications should not mistake a temporary id for a permanent one. Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.",
"requirements": "Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.",
"min": 0,
"max": "1",
"base": {
"path": "Identifier.use",
"min": 0,
"max": "1"
},
"type": [
{
"code": "code"
}
],
"ele-1"
],
{
"key": "ele-1",
"severity": "error",
"human": "All FHIR elements must have a @value or children",
"expression": "hasValue() | (children().count() > id.count())",
"xpath": "@value|f:*|h:div"
}
],
"isModifier": true,
"isSummary": true,
"binding": {
{
"url": "http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName",
"valueString": "IdentifierUse"
}
],
"strength": "required",
"description": "Identifies the purpose for this identifier, if known .",
"reference": "http://hl7.org/fhir/ValueSet/identifier-use"
}
},
"mapping": [
{
"identity": "rim",
"map": "n/a"
},
{
"identity": "v2",
"map": "N/A"
},
{
"identity": "rim",
"map": "Role.code or implied by context"
}
]
},
{
"id": "ResearchSubject.identifier.type",
"path": "ResearchSubject.identifier.type",
"short": "Description of identifier",
"definition": "A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.",
"comment": "This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. \n\nWhere the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.",
"requirements": "Allows users to make use of identifiers when the identifier system is not known.",
"min": 0,
"max": "1",
"base": {
"path": "Identifier.type",
"min": 0,
"max": "1"
},
"type": [
{
"code": "CodeableConcept"
}
],
"ele-1"
],
{
"key": "ele-1",
"severity": "error",
"human": "All FHIR elements must have a @value or children",
"expression": "hasValue() | (children().count() > id.count())",
"xpath": "@value|f:*|h:div"
}
],
"isSummary": true,
"binding": {
{
"url": "http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName",
"valueString": "IdentifierType"
},
{
"url": "http://hl7.org/fhir/StructureDefinition/elementdefinition-isCommonBinding",
"valueBoolean": true
}
],
"strength": "extensible",
"description": "A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.",
"reference": "http://hl7.org/fhir/ValueSet/identifier-type"
}
},
"mapping": [
{
"identity": "rim",
"map": "n/a"
},
{
"identity": "v2",
"map": "CE/CNE/CWE"
},
{
"identity": "rim",
"map": "CD"
},
{
"identity": "orim",
"map": "fhir:CodeableConcept rdfs:subClassOf dt:CD"
},
{
"identity": "v2",
"map": "CX.5"
},
{
"identity": "rim",
"map": "Role.code or implied by context"
}
]
},
{
"id": "ResearchSubject.identifier.system",
"path": "ResearchSubject.identifier.system",
"short": "The namespace for the identifier value",
"definition": "Establishes the namespace for the value - that is, a URL that describes a set values that are unique.",
"comment": "see http://en.wikipedia.org/wiki/Uniform_resource_identifier",
"requirements": "There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.",
"min": 0,
"max": "1",
"base": {
"path": "Identifier.system",
"min": 0,
"max": "1"
},
"type": [
{
"code": "uri"
}
],
"example": [
{
"label": "General",
"valueUri": "http://www.acme.com/identifiers/patient"
}
],
"ele-1"
],
{
"key": "ele-1",
"severity": "error",
"human": "All FHIR elements must have a @value or children",
"expression": "hasValue() | (children().count() > id.count())",
"xpath": "@value|f:*|h:div"
}
],
"isSummary": true,
"mapping": [
{
"identity": "rim",
"map": "n/a"
},
{
"identity": "v2",
"map": "CX.4 / EI-2-4"
},
{
"identity": "rim",
"map": "II.root or Role.id.root"
},
{
"identity": "servd",
"map": "./IdentifierType"
}
]
},
{
"id": "ResearchSubject.identifier.value",
"path": "ResearchSubject.identifier.value",
"short": "The value that is unique",
"definition": "The portion of the identifier typically relevant to the user and which is unique within the context of the system.",
"comment": "If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the [Rendered Value extension](extension-rendered-value.html).",
"min": 1,
"max": "1",
"base": {
"path": "Identifier.value",
"min": 0,
"max": "1"
},
"type": [
{
"code": "string"
}
],
"example": [
{
"label": "General",
"valueString": "123456"
}
],
"ele-1"
],
{
"key": "ele-1",
"severity": "error",
"human": "All FHIR elements must have a @value or children",
"expression": "hasValue() | (children().count() > id.count())",
"xpath": "@value|f:*|h:div"
}
],
"isSummary": true,
"mapping": [
{
"identity": "rim",
"map": "n/a"
},
{
"identity": "v2",
"map": "CX.1 / EI.1"
},
{
"identity": "rim",
"map": "II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root)"
},
{
"identity": "servd",
"map": "./Value"
}
]
},
{
"id": "ResearchSubject.identifier.period",
"path": "ResearchSubject.identifier.period",
"short": "Time period when id is/was valid for use",
"definition": "Time period during which identifier is/was valid for use.",
"comment": "This is not a duration - that's a measure of time (a separate type), but a duration that occurs at a fixed value of time. A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. \"the patient was an inpatient of the hospital for this time range\") or one value from the range applies (e.g. \"give to the patient between these two times\"). If duration is required, specify the type as Interval|Duration.",
"min": 0,
"max": "0",
"base": {
"path": "Identifier.period",
"min": 0,
"max": "1"
},
"type": [
{
"code": "Period"
}
],
"ele-1"
],
{
"key": "ele-1",
"severity": "error",
"human": "All FHIR elements must have a @value or children",
"expression": "hasValue() | (children().count() > id.count())",
"xpath": "@value|f:*|h:div"
},
{
"key": "per-1",
"severity": "error",
"human": "If present, start SHALL have a lower value than end",
"expression": "start.empty() or end.empty() or (start <= end)",
"xpath": "not(exists(f:start)) or not(exists(f:end)) or (f:start/@value <= f:end/@value)"
}
],
"isSummary": true,
"mapping": [
{
"identity": "rim",
"map": "n/a"
},
{
"identity": "v2",
"map": "DR"
},
{
"identity": "rim",
"map": "IVL<TS>[lowClosed=\"true\" and highClosed=\"true\"] or URG<TS>[lowClosed=\"true\" and highClosed=\"true\"]"
},
{
"identity": "v2",
"map": "CX.7 + CX.8"
},
{
"identity": "rim",
"map": "Role.effectiveTime or implied by context"
},
{
"identity": "servd",
"map": "./StartDate and ./EndDate"
}
]
},
{
"id": "ResearchSubject.identifier.assigner",
"path": "ResearchSubject.identifier.assigner",
"short": "Organization that issued id (may be just text)",
"definition": "Organization that issued/manages the identifier.",
"comment": "The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.",
"min": 0,
"max": "0",
"base": {
"path": "Identifier.assigner",
"min": 0,
"max": "1"
},
"type": [
{
"code": "Reference",
"targetProfile": "http://hl7.org/fhir/StructureDefinition/Organization"
}
],
"ele-1"
],
{
"key": "ele-1",
"severity": "error",
"human": "All FHIR elements must have a @value or children",
"expression": "hasValue() | (children().count() > id.count())",
"xpath": "@value|f:*|h:div"
},
{
"key": "ref-1",
"severity": "error",
"human": "SHALL have a contained resource if a local reference is provided",
"expression": "reference.startsWith('#').not() or (reference.substring(1).trace('url') in %resource.contained.id.trace('ids'))",
"xpath": "not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])"
}
],
"isSummary": true,
"mapping": [
{
"identity": "rim",
"map": "n/a"
},
{
"identity": "rim",
"map": "The target of a resource reference is a RIM entry point (Act, Role, or Entity)"
},
{
"identity": "v2",
"map": "CX.4 / (CX.4,CX.9,CX.10)"
},
{
"identity": "rim",
"map": "II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper"
},
{
"identity": "servd",
"map": "./IdentifierIssuingAuthority"
}
]
},
{
"id": "ResearchSubject.status",
"path": "ResearchSubject.status",
"short": "candidate | enrolled | active | suspended | withdrawn | completed",
"definition": "The current state of the subject.",
"comment": "This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid.",
"min": 1,
"max": "1",
"base": {
"path": "ResearchSubject.status",
"min": 1,
"max": "1"
},
"type": [
{
"code": "code"
}
],
"ele-1"
],
{
"key": "ele-1",
"severity": "error",
"human": "All FHIR elements must have a @value or children",
"expression": "hasValue() | (children().count() > id.count())",
"xpath": "@value|f:*|h:div"
}
],
"isModifier": true,
"isSummary": true,
"binding": {
{
"url": "http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName",
"valueString": "ResearchSubjectStatus"
}
],
"strength": "required",
"description": "Indicates the progression of a study subject through a study",
"reference": "http://hl7.org/fhir/ValueSet/research-subject-status"
}
},
"mapping": [
{
"identity": "rim",
"map": "n/a"
},
{
"identity": "rim",
"map": ".status"
},
{
"identity": "w5",
"map": "status"
}
]
},
{
"id": "ResearchSubject.period",
"path": "ResearchSubject.period",
"short": "Start and end of participation",
"definition": "The dates the subject began and ended their participation in the study.",
"comment": "This is not a duration - that's a measure of time (a separate type), but a duration that occurs at a fixed value of time. A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. \"the patient was an inpatient of the hospital for this time range\") or one value from the range applies (e.g. \"give to the patient between these two times\"). If duration is required, specify the type as Interval|Duration.",
"alias": [
"timing"
],
"min": 0,
"max": "0",
"base": {
"path": "ResearchSubject.period",
"min": 0,
"max": "1"
},
"type": [
{
"code": "Period"
}
],
"ele-1"
],
{
"key": "ele-1",
"severity": "error",
"human": "All FHIR elements must have a @value or children",
"expression": "hasValue() | (children().count() > id.count())",
"xpath": "@value|f:*|h:div"
},
{
"key": "per-1",
"severity": "error",
"human": "If present, start SHALL have a lower value than end",
"expression": "start.empty() or end.empty() or (start <= end)",
"xpath": "not(exists(f:start)) or not(exists(f:end)) or (f:start/@value <= f:end/@value)"
}
],
"isSummary": true,
"mapping": [
{
"identity": "rim",
"map": "n/a"
},
{
"identity": "v2",
"map": "DR"
},
{
"identity": "rim",
"map": "IVL<TS>[lowClosed=\"true\" and highClosed=\"true\"] or URG<TS>[lowClosed=\"true\" and highClosed=\"true\"]"
},
{
"identity": "w5",
"map": "when.planned"
}
]
},
{
"id": "ResearchSubject.study",
"path": "ResearchSubject.study",
"short": "Study subject is part of",
"definition": "Reference to the study the subject is participating in.",
"comment": "References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.",
"min": 1,
"max": "1",
"base": {
"path": "ResearchSubject.study",
"min": 1,
"max": "1"
},
"type": [
{
"code": "Reference",
"targetProfile": "http://hl7.org/fhir/StructureDefinition/ResearchStudy"
}
],
"ele-1"
],
{
"key": "ele-1",
"severity": "error",
"human": "All FHIR elements must have a @value or children",
"expression": "hasValue() | (children().count() > id.count())",
"xpath": "@value|f:*|h:div"
},
{
"key": "ref-1",
"severity": "error",
"human": "SHALL have a contained resource if a local reference is provided",
"expression": "reference.startsWith('#').not() or (reference.substring(1).trace('url') in %resource.contained.id.trace('ids'))",
"xpath": "not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])"
}
],
"isSummary": true,
"mapping": [
{
"identity": "rim",
"map": "n/a"
},
{
"identity": "rim",
"map": "The target of a resource reference is a RIM entry point (Act, Role, or Entity)"
}
]
},
{
"id": "ResearchSubject.individual",
"path": "ResearchSubject.individual",
"short": "Who is part of study",
"definition": "The record of the person or animal who is involved in the study.",
"comment": "References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.",
"min": 1,
"max": "1",
"base": {
"path": "ResearchSubject.individual",
"min": 1,
"max": "1"
},
"type": [
{
"code": "Reference",
"targetProfile": "http://hl7.org/fhir/StructureDefinition/Patient"
}
],
"ele-1"
],
{
"key": "ele-1",
"severity": "error",
"human": "All FHIR elements must have a @value or children",
"expression": "hasValue() | (children().count() > id.count())",
"xpath": "@value|f:*|h:div"
},
{
"key": "ref-1",
"severity": "error",
"human": "SHALL have a contained resource if a local reference is provided",
"expression": "reference.startsWith('#').not() or (reference.substring(1).trace('url') in %resource.contained.id.trace('ids'))",
"xpath": "not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])"
}
],
"isSummary": true,
"mapping": [
{
"identity": "rim",
"map": "n/a"
},
{
"identity": "rim",
"map": "The target of a resource reference is a RIM entry point (Act, Role, or Entity)"
}
]
},
{
"id": "ResearchSubject.assignedArm",
"path": "ResearchSubject.assignedArm",
"short": "What path should be followed",
"definition": "The name of the arm in the study the subject is expected to follow as part of this study.",
"comment": "Note that FHIR strings may not exceed 1MB in size",
"min": 0,
"max": "0",
"base": {
"path": "ResearchSubject.assignedArm",
"min": 0,
"max": "1"
},
"type": [
{
"code": "string"
}
],
"ele-1"
],
{
"key": "ele-1",
"severity": "error",
"human": "All FHIR elements must have a @value or children",
"expression": "hasValue() | (children().count() > id.count())",
"xpath": "@value|f:*|h:div"
}
],
"mapping": [
{
"identity": "rim",
"map": "n/a"
}
]
},
{
"id": "ResearchSubject.actualArm",
"path": "ResearchSubject.actualArm",
"short": "What path was followed",
"definition": "The name of the arm in the study the subject actually followed as part of this study.",
"comment": "Note that FHIR strings may not exceed 1MB in size",
"min": 0,
"max": "0",
"base": {
"path": "ResearchSubject.actualArm",
"min": 0,
"max": "1"
},
"type": [
{
"code": "string"
}
],
"ele-1"
],
{
"key": "ele-1",
"severity": "error",
"human": "All FHIR elements must have a @value or children",
"expression": "hasValue() | (children().count() > id.count())",
"xpath": "@value|f:*|h:div"
}
],
"mapping": [
{
"identity": "rim",
"map": "n/a"
}
]
},
{
"id": "ResearchSubject.consent",
"path": "ResearchSubject.consent",
"short": "Agreement to participate in study",
"definition": "A record of the patient's informed agreement to participate in the study.",
"comment": "References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.",
"min": 0,
"max": "0",
"base": {
"path": "ResearchSubject.consent",
"min": 0,
"max": "1"
},
"type": [
{
"code": "Reference",
"targetProfile": "http://hl7.org/fhir/StructureDefinition/Consent"
}
],
"ele-1"
],
{
"key": "ele-1",
"severity": "error",
"human": "All FHIR elements must have a @value or children",
"expression": "hasValue() | (children().count() > id.count())",
"xpath": "@value|f:*|h:div"
},
{
"key": "ref-1",
"severity": "error",
"human": "SHALL have a contained resource if a local reference is provided",
"expression": "reference.startsWith('#').not() or (reference.substring(1).trace('url') in %resource.contained.id.trace('ids'))",
"xpath": "not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])"
}
],
"mapping": [
{
"identity": "rim",
"map": "n/a"
},
{
"identity": "rim",
"map": "The target of a resource reference is a RIM entry point (Act, Role, or Entity)"
}
]
}
]
},
"element": [
{
"id": "ResearchSubject.identifier",
"path": "ResearchSubject.identifier",
"min": 1
},
{
"id": "ResearchSubject.identifier.value",
"path": "ResearchSubject.identifier.value",
"min": 1
},
{
"id": "ResearchSubject.identifier.period",
"path": "ResearchSubject.identifier.period",
"max": "0"
},
{
"id": "ResearchSubject.identifier.assigner",
"path": "ResearchSubject.identifier.assigner",
"max": "0"
},
{
"id": "ResearchSubject.period",
"path": "ResearchSubject.period",
"max": "0"
},
{
"id": "ResearchSubject.assignedArm",
"path": "ResearchSubject.assignedArm",
"max": "0"
},
{
"id": "ResearchSubject.actualArm",
"path": "ResearchSubject.actualArm",
"max": "0"
},
{
"id": "ResearchSubject.consent",
"path": "ResearchSubject.consent",
"max": "0"
}
]
}
}

Example

NOTE to developer: This is only a sample resource. For the resource structure and valusets always refer the section "Overview" under each profile definition in the Implementation guide. If an element is defined as an array (0..*) in the standard and in RDC profile as an object (0..1), please note that it should still carry the structure of an array with one occurance. The structure for all resources as per the FHIR standard can be found at https://www.hl7.org/fhir/STU3/resourcelist.html

The identifier holds the research subject id value, The clinical subject / patient ID consists of two numbers, first of all a two-digit site number, dash, followed by a three-digit subject/patient number. Example: 03-001 ist the first patient at site number 03, the combination of site and subject/patient ID is required.

{
"resourceType": "ResearchSubject",
"id": "3e6c9091-95fa-40ba-a6aa-202edbed189c",
"meta": {
"profile": [
"http://roche.com/fhir/rdc/StructureDefinition/researchsubject"
]
},
"status": "active",
"study": {
"reference": "ResearchStudy/5ee69aed-1be6-41ec-954a-d7714591c4d0"
},
"reference": "Patient/abcdefghijklmnopqrstuvxyz0123456789ABCDEFGHIJKLMNOPQRSTUVXYZ"
}
}