Details

The below section shows a detailed view of the resource

ResearchSubject
ShortInvestigation to increase healthcare-related patient-independent knowledge
Definition

A process where a researcher or organization plans and then executes a series of steps intended to increase the field of healthcare-related knowledge. This includes studies of safety, efficacy, comparative effectiveness and other information about medications, devices, therapies and other interventional and investigative techniques. A ResearchStudy involves the gathering of information about human or animal subjects.

Cardinality0..*
AliasStudy Subject
Comments

Need to make sure we encompass public health studies.

Constraints
  • dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources
    contained.contained.empty()
  • dom-1: If the resource is contained in another resource, it SHALL NOT contain any narrative
    contained.text.empty()
  • dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated
    contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()
  • dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource
    contained.where(('#'+id in %resource.descendants().reference).not()).empty()
Mappings
  • rim: Entity. Role, or Act
  • v2: OBX
  • rim: Observation[classCode=CLNTRL, moodCode=EVN]
  • w5: clinical.diagnostics
ResearchSubject.id
ShortLogical id of this artifact
Definition

The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

Cardinality0..1
Typeid
SummaryTrue
Comments

The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

ConditionsThe cardinality or value of this element may be affected by these constraints: ele-1
Constraints
  • ele-1: All FHIR elements must have a @value or children
    hasValue() | (children().count() > id.count())
Mappings
  • rim: n/a
ResearchSubject.meta
ShortMetadata about the resource
Definition

The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content may not always be associated with version changes to the resource.

Cardinality0..1
TypeMeta
SummaryTrue
ConditionsThe cardinality or value of this element may be affected by these constraints: ele-1
Constraints
  • ele-1: All FHIR elements must have a @value or children
    hasValue() | (children().count() > id.count())
Mappings
  • rim: n/a
  • rim: N/A
ResearchSubject.implicitRules
ShortA set of rules under which this content was created
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content.

Cardinality0..1
Typeuri
ModifierTrue
SummaryTrue
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element.

This element is labelled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation.

ConditionsThe cardinality or value of this element may be affected by these constraints: ele-1
Constraints
  • ele-1: All FHIR elements must have a @value or children
    hasValue() | (children().count() > id.count())
Mappings
  • rim: n/a
ResearchSubject.language
ShortLanguage of the resource content
Definition

The base language in which the resource is written.

Cardinality0..1
Typecode
Binding

A human language.

Common Languages (extensible)

Binding extensions
maxValueSetAll Languages
Comments

Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

ConditionsThe cardinality or value of this element may be affected by these constraints: ele-1
Constraints
  • ele-1: All FHIR elements must have a @value or children
    hasValue() | (children().count() > id.count())
Mappings
  • rim: n/a
ResearchSubject.text
ShortText summary of the resource, for human interpretation
Definition

A human-readable narrative that contains a summary of the resource, and may be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

Cardinality0..1
TypeNarrative
Aliasnarrative, html, xhtml, display
Comments

Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded in formation is added later.

ConditionsThe cardinality or value of this element may be affected by these constraints: ele-1, dom-1
Constraints
  • ele-1: All FHIR elements must have a @value or children
    hasValue() | (children().count() > id.count())
Mappings
  • rim: n/a
  • rim: N/A
  • rim: Act.text?
ResearchSubject.contained
ShortContained, inline Resources
Definition

These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

Cardinality0..*
TypeResource
Aliasinline resources, anonymous resources, contained resources
Comments

This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again.

Mappings
  • rim: Entity. Role, or Act
  • rim: N/A
ResearchSubject.extension
ShortAdditional Content defined by implementations
Definition

May be used to represent additional information that is not part of the basic definition of the resource. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Cardinality0..*
TypeExtension
Aliasextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Slicing

Unordered, Open, by url(Value)

Extensions are always sliced by (at least) url

ConditionsThe cardinality or value of this element may be affected by these constraints: ele-1
Constraints
  • ele-1: All FHIR elements must have a @value or children
    hasValue() | (children().count() > id.count())
  • ext-1: Must have either extensions or value[x], not both
    extension.exists() != value.exists()
Mappings
  • rim: n/a
  • rim: N/A
ResearchSubject.modifierExtension
ShortExtensions that cannot be ignored
Definition

May be used to represent additional information that is not part of the basic definition of the resource, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Cardinality0..*
TypeExtension
ModifierTrue
Aliasextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Slicing

Unordered, Open, by url(Value)

Extensions are always sliced by (at least) url

ConditionsThe cardinality or value of this element may be affected by these constraints: ele-1
Constraints
  • ele-1: All FHIR elements must have a @value or children
    hasValue() | (children().count() > id.count())
  • ext-1: Must have either extensions or value[x], not both
    extension.exists() != value.exists()
Mappings
  • rim: n/a
  • rim: N/A
ResearchSubject.identifier
ShortBusiness Identifier for research subject
Definition

Identifiers assigned to this research study by the sponsor or other systems.

Cardinality1..1
TypeIdentifier
SummaryTrue
Requirements

Allows identification of the research study as it is known by various participating systems and in a way that remains consistent across servers.

ConditionsThe cardinality or value of this element may be affected by these constraints: ele-1
Constraints
  • ele-1: All FHIR elements must have a @value or children
    hasValue() | (children().count() > id.count())
Mappings
  • rim: n/a
  • v2: CX / EI (occasionally, more often EI maps to a resource id or a URL)
  • rim: II - see see identifier pattern at http://wiki.hl7.org/index.php?title=Common_Design_Patterns#Identifier_Pattern for relevant discussion. The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT]
  • servd: Identifier
  • rim: .identifier
  • w5: id
ResearchSubject.identifier.id
Shortxml:id (or equivalent in JSON)
Definition

unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Cardinality0..1
Typestring
Comments

Note that FHIR strings may not exceed 1MB in size

ConditionsThe cardinality or value of this element may be affected by these constraints: ele-1
Constraints
  • ele-1: All FHIR elements must have a @value or children
    hasValue() | (children().count() > id.count())
Mappings
  • rim: n/a
ResearchSubject.identifier.extension
ShortAdditional Content defined by implementations
Definition

May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Cardinality0..*
TypeExtension
Aliasextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Slicing

Unordered, Open, by url(Value)

Extensions are always sliced by (at least) url

ConditionsThe cardinality or value of this element may be affected by these constraints: ele-1
Constraints
  • ele-1: All FHIR elements must have a @value or children
    hasValue() | (children().count() > id.count())
  • ext-1: Must have either extensions or value[x], not both
    extension.exists() != value.exists()
Mappings
  • rim: n/a
  • rim: N/A
ResearchSubject.identifier.use
Shortusual | official | temp | secondary (If known)
Definition

The purpose of this identifier.

Cardinality0..1
Typecode
Binding

Identifies the purpose for this identifier, if known .

IdentifierUse (required)

ModifierTrue
SummaryTrue
Requirements

Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

Comments

This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one. Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

ConditionsThe cardinality or value of this element may be affected by these constraints: ele-1
Constraints
  • ele-1: All FHIR elements must have a @value or children
    hasValue() | (children().count() > id.count())
Mappings
  • rim: n/a
  • v2: N/A
  • rim: Role.code or implied by context
ResearchSubject.identifier.type
ShortDescription of identifier
Definition

A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

Cardinality0..1
TypeCodeableConcept
Binding

A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.

Identifier Type Codes (extensible)

SummaryTrue
Requirements

Allows users to make use of identifiers when the identifier system is not known.

Comments

This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage.

Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

ConditionsThe cardinality or value of this element may be affected by these constraints: ele-1
Constraints
  • ele-1: All FHIR elements must have a @value or children
    hasValue() | (children().count() > id.count())
Mappings
  • rim: n/a
  • v2: CE/CNE/CWE
  • rim: CD
  • orim: fhir:CodeableConcept rdfs:subClassOf dt:CD
  • v2: CX.5
  • rim: Role.code or implied by context
ResearchSubject.identifier.system
ShortThe namespace for the identifier value
Definition

Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

Cardinality0..1
Typeuri
SummaryTrue
Requirements

There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

Comments

see http://en.wikipedia.org/wiki/Uniform_resource_identifier

ConditionsThe cardinality or value of this element may be affected by these constraints: ele-1
Constraints
  • ele-1: All FHIR elements must have a @value or children
    hasValue() | (children().count() > id.count())
ExamplesGeneral
http://www.acme.com/identifiers/patient
Mappings
  • rim: n/a
  • v2: CX.4 / EI-2-4
  • rim: II.root or Role.id.root
  • servd: ./IdentifierType
ResearchSubject.identifier.value
ShortThe value that is unique
Definition

The portion of the identifier typically relevant to the user and which is unique within the context of the system.

Cardinality1..1
Typestring
SummaryTrue
Comments

If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension.

ConditionsThe cardinality or value of this element may be affected by these constraints: ele-1
Constraints
  • ele-1: All FHIR elements must have a @value or children
    hasValue() | (children().count() > id.count())
ExamplesGeneral
123456
Mappings
  • rim: n/a
  • v2: CX.1 / EI.1
  • rim: II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root)
  • servd: ./Value
ResearchSubject.identifier.period
ShortTime period when id is/was valid for use
Definition

Time period during which identifier is/was valid for use.

Cardinality0..0
TypePeriod
SummaryTrue
Comments

This is not a duration - that's a measure of time (a separate type), but a duration that occurs at a fixed value of time. A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). If duration is required, specify the type as Interval|Duration.

ConditionsThe cardinality or value of this element may be affected by these constraints: ele-1
Constraints
  • ele-1: All FHIR elements must have a @value or children
    hasValue() | (children().count() > id.count())
  • per-1: If present, start SHALL have a lower value than end
    start.empty() or end.empty() or (start <= end)
Mappings
  • rim: n/a
  • v2: DR
  • rim: IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"]
  • v2: CX.7 + CX.8
  • rim: Role.effectiveTime or implied by context
  • servd: ./StartDate and ./EndDate
ResearchSubject.identifier.assigner
ShortOrganization that issued id (may be just text)
Definition

Organization that issued/manages the identifier.

Cardinality0..0
TypeReference(Organization)
SummaryTrue
Comments

The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.

ConditionsThe cardinality or value of this element may be affected by these constraints: ele-1
Constraints
  • ele-1: All FHIR elements must have a @value or children
    hasValue() | (children().count() > id.count())
  • ref-1: SHALL have a contained resource if a local reference is provided
    reference.startsWith('#').not() or (reference.substring(1).trace('url') in %resource.contained.id.trace('ids'))
Mappings
  • rim: n/a
  • rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity)
  • v2: CX.4 / (CX.4,CX.9,CX.10)
  • rim: II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper
  • servd: ./IdentifierIssuingAuthority
ResearchSubject.status
Shortcandidate | enrolled | active | suspended | withdrawn | completed
Definition

The current state of the subject.

Cardinality1..1
Typecode
Binding

Indicates the progression of a study subject through a study

ResearchSubjectStatus (required)

ModifierTrue
SummaryTrue
Comments

This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid.

ConditionsThe cardinality or value of this element may be affected by these constraints: ele-1
Constraints
  • ele-1: All FHIR elements must have a @value or children
    hasValue() | (children().count() > id.count())
Mappings
  • rim: n/a
  • rim: .status
  • w5: status
ResearchSubject.period
ShortStart and end of participation
Definition

The dates the subject began and ended their participation in the study.

Cardinality0..0
TypePeriod
SummaryTrue
Aliastiming
Comments

This is not a duration - that's a measure of time (a separate type), but a duration that occurs at a fixed value of time. A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). If duration is required, specify the type as Interval|Duration.

ConditionsThe cardinality or value of this element may be affected by these constraints: ele-1
Constraints
  • ele-1: All FHIR elements must have a @value or children
    hasValue() | (children().count() > id.count())
  • per-1: If present, start SHALL have a lower value than end
    start.empty() or end.empty() or (start <= end)
Mappings
  • rim: n/a
  • v2: DR
  • rim: IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"]
  • w5: when.planned
ResearchSubject.study
ShortStudy subject is part of
Definition

Reference to the study the subject is participating in.

Cardinality1..1
TypeReference(ResearchStudy)
SummaryTrue
Comments

References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.

ConditionsThe cardinality or value of this element may be affected by these constraints: ele-1
Constraints
  • ele-1: All FHIR elements must have a @value or children
    hasValue() | (children().count() > id.count())
  • ref-1: SHALL have a contained resource if a local reference is provided
    reference.startsWith('#').not() or (reference.substring(1).trace('url') in %resource.contained.id.trace('ids'))
Mappings
  • rim: n/a
  • rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity)
ResearchSubject.individual
ShortWho is part of study
Definition

The record of the person or animal who is involved in the study.

Cardinality1..1
TypeReference(Patient)
SummaryTrue
Comments

References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.

ConditionsThe cardinality or value of this element may be affected by these constraints: ele-1
Constraints
  • ele-1: All FHIR elements must have a @value or children
    hasValue() | (children().count() > id.count())
  • ref-1: SHALL have a contained resource if a local reference is provided
    reference.startsWith('#').not() or (reference.substring(1).trace('url') in %resource.contained.id.trace('ids'))
Mappings
  • rim: n/a
  • rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity)
ResearchSubject.assignedArm
ShortWhat path should be followed
Definition

The name of the arm in the study the subject is expected to follow as part of this study.

Cardinality0..0
Typestring
Comments

Note that FHIR strings may not exceed 1MB in size

ConditionsThe cardinality or value of this element may be affected by these constraints: ele-1
Constraints
  • ele-1: All FHIR elements must have a @value or children
    hasValue() | (children().count() > id.count())
Mappings
  • rim: n/a
ResearchSubject.actualArm
ShortWhat path was followed
Definition

The name of the arm in the study the subject actually followed as part of this study.

Cardinality0..0
Typestring
Comments

Note that FHIR strings may not exceed 1MB in size

ConditionsThe cardinality or value of this element may be affected by these constraints: ele-1
Constraints
  • ele-1: All FHIR elements must have a @value or children
    hasValue() | (children().count() > id.count())
Mappings
  • rim: n/a
ResearchSubject.consent
ShortAgreement to participate in study
Definition

A record of the patient's informed agreement to participate in the study.

Cardinality0..0
TypeReference(Consent)
Comments

References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.

ConditionsThe cardinality or value of this element may be affected by these constraints: ele-1
Constraints
  • ele-1: All FHIR elements must have a @value or children
    hasValue() | (children().count() > id.count())
  • ref-1: SHALL have a contained resource if a local reference is provided
    reference.startsWith('#').not() or (reference.substring(1).trace('url') in %resource.contained.id.trace('ids'))
Mappings
  • rim: n/a
  • rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity)