UPR-EWM-Codes
This ValueSet has the values that are used in EWM-Observations to describe types of status, error, warning, maintenance or event that are occuring.
This value set includes codes from the following code systems:
The following codes from system:
RocheCodeSystemCode Display STATUS_1 Manually entered ALARM_1 Cartridge low ALARM_2 Battery low ALARM_3 Review time and date ALARM_4 Alarm clock (Spirit pump) ALARM_5 Remaining pump time ALARM_6 TBR cancelled; not in EVENT ALARM_7 TBR over; not in EVENT ALARM_8 Bolus cancelled ALARM_9 End of use time alert ERROR_1 Cartridge empty ERROR_2 Battery empty ERROR_3 Automatic off ERROR_4 Occlusion ERROR_5 End of use time ERROR_6 Mechanical error ERROR_7 Electronic error ERROR_8 Power interrupt ERROR_9 End of operation ERROR_10 Cartridge error ERROR_11 Set not primed ERROR_12 Data interrupted ERROR_13 Language error ERROR_14 Concentration changed MAINTENANCE_20 Cartridge missing WARNING_1 Cartridge low WARNING_2 Battery low WARNING_4 Call for update WARNING_5 Pump timer WARNING_9 Loantime warning WARNING_10 Bluetooth fault WARNING_33 Review time and date WARNING_34 Lifetime warning WARNING_39 Loantime warning WARNING_40 Expired strip WARNING_41 Used drum WARNING_42 Temperature warning MAINTENANCE_21 Cartridge empty MAINTENANCE_22 Battery depleted MAINTENANCE_23 Automatic off MAINTENANCE_26 Cartridge error MAINTENANCE_27 Data interrupted MAINTENANCE_28 Insulin timeout over MAINTENANCE_29 Battery type MAINTENANCE_30 Cartridge type EVENT_1 Run EVENT_2 Pause EVENT_3 Stop EVENT_4 Cartridge Changed EVENT_5 N-M EVENT_6 TBR end EVENT_7 Power Up EVENT_8 Power Down EVENT_9 None EVENT_10 Time / Date corrected EVENT_11 Time / Date set EVENT_12 TBR start EVENT_13 Prime Infusion Set EVENT_14 Rewind Piston Rod EVENT_15 Other EVENT_16 Basal Profile Switch EVENT_17 Profile changed EVENT_18 Power Up - Virtual EVENT_19 Power Down - Virtual EVENT_20 Time / Date corrected - Virtual EVENT_21 Time / Date set - Virtual EVENT_22 TBR End (cancelled) EVENT_23 Power up (time shift back) EVENT_24 Time / Date set (time shift back) EVENT_25 Timed Out Dose EVENT_26 Asterisk STATUS_2 Valid Flag WARNING_43 Warning EOL WARNING_44 EOL ERROR_15 Dose Amount Measurement Error ERROR_16 Recoverable Error ERROR_17 Unrecoverable Error ERROR_18 Interrupted Injection ERROR_19 Pulsed Injection ERROR_20 Corrupted entry ERROR_21 Big Dose Error ERROR_22 Drug Type Measurement Error WARNING_45 Reservoir end time WARNING_46 Battery attention WARNING_47 Reservoir low WARNING_48 TBR cancelled MAINTENANCE_31 Reservoir issue MAINTENANCE_32 Reservoir change not completed MAINTENANCE_33 Reservoir empty ERROR_23 Battery error ERROR_24 Sensor error ERROR_25 CRC Corrupted ERROR_26 Dose in progress WARNING_11 Big Dose Warning hypo-warning Hypo Warning hyper-warning Hyper Warning ERROR_30 Device fault WARNING_57 Minimum rate of change WARNING_58 Maximum rate of change WARNING_49 Calibration Required WARNING_56 Session ended ERROR_39 Connection lost WARNING_51 Sensor temperature too low WARNING_52 Sensor temperature too high MAINTENANCE_34 Calibration failed MAINTENANCE_35 Calibration recommended MAINTENANCE_36 Sensor Warming up MAINTENANCE_37 Sign in required ERROR_40 Sensor malfunction WARNING_59 Hypo warning urgent ERROR_41 Type Incorrect For Device ERROR_42 Device Specific Alert MAINTENANCE_38 Calibration Not Allowed MAINTENANCE_39 Session Stopped MAINTENANCE_40 Sensor Rate Decrease Exceeded MAINTENANCE_41 Sensor Rate Increase Exceeded E-101 Transmitter not found E-102 CGM app was terminated due to an internal error E-104 Memory full E-105 Time outside of limits E-106 Data integrity corrupted E-107 Error in flow monitor E-108 Error in flow control E-111 CGM was terminated due to an EMWR error E-112 Session ended because wrong dialog was shown E-125 Incorrect CGM system I-101 Calibration not possible I-102 End session rcommended (repeating sensor failures) I-103 Calibration failed M-102 Incorrect sensor type M-115 Sensor must be calibrated M-116 Sensor Rate Increase Exceeded M-117 Sensor malfunctioning M-118 Connection lost to transmitter M-119 No transmitter in range M-120 Session ended because sensor operation time expired M-122 Sensor temperature too low M-123 Sensor temperature too high M-124 Smartphone battery almost empty M-125 Connection failure to transmitter R-100 Calibration required reminder R-101 Calibration recommended R-102 CGM session will end soon W-101 Incorrect pin W-103 Invalid bg/insulin/carb entry W-107 Transmitter malfunctioning W-108 Sensor malfunctioning W-109 Cannot undo action W-111 End cgm session confirmation W-112 Smartphone rooted W-126 Cgm session not started W-130 Smartphone not supported W-132 High CGM warning MESSAGE_1 Marketing 1 MESSAGE_2 Marketing 2 The following codes from system:
SNOMED_CTCode Display 103713001 Replacement of catheter (procedure) 384728007 Replacement of device (procedure)
JSON
{
],
{
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
},
{
}
]
},
{
{
},
{
}
]
}
]
},
}