For the initial scope, this DeviceComponent resource is only applicable to describe a single node in the containment tree that is produced by the context scanner in any medical device that implements or derives from the ISO/IEEE 11073 standard and that does not represent a metric. Examples for such a node are MDS, VMD, or Channel.

• dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources
  contained.contained.empty()
• dom-1: If the resource is contained in another resource, it SHALL NOT contain any narrative
  contained.text.empty()
• dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated
  contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()
• dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource
  contained.where(('#'+id in %resource.descendants().reference).not()).empty()

• rim: Entity. Role, or Act
• w5: administrative.device

The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

• ele-1: All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())

• rim: n/a

• ele-1: All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())

• rim: n/a
• rim: N/A

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element.

This element is labelled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation.

• ele-1: All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())

• rim: n/a

Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

• ele-1: All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())

• rim: n/a

Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded in formation is added later.

• ele-1: All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())

• rim: n/a
• rim: N/A
• rim: Act.text?

This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again.

• rim: Entity. Role, or Act
• rim: N/A

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

• ele-1: All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())
• ext-1: Must have either extensions or value[x], not both
  extension.exists() != value.exists()

• rim: n/a
• rim: N/A

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

• ele-1: All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())
• ext-1: Must have either extensions or value[x], not both
  extension.exists() != value.exists()

• rim: n/a
• rim: N/A

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

• ele-1: All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())
• ext-1: Must have either extensions or value[x], not both
  extension.exists() != value.exists()

• rim: n/a
• rim: N/A

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

• ele-1: All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())
• ext-1: Must have either extensions or value[x], not both
  extension.exists() != value.exists()

• rim: n/a
• rim: N/A

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

• ele-1: All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())
• ext-1: Must have either extensions or value[x], not both
  extension.exists() != value.exists()

• rim: n/a
• rim: N/A

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

• ele-1: All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())
• ext-1: Must have either extensions or value[x], not both
  extension.exists() != value.exists()

• rim: n/a
• rim: N/A

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

• ele-1: All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())
• ext-1: Must have either extensions or value[x], not both
  extension.exists() != value.exists()

• rim: n/a
• rim: N/A

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

• ele-1: All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())
• ext-1: Must have either extensions or value[x], not both
  extension.exists() != value.exists()

• rim: n/a
• rim: N/A

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

• ele-1: All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())
• ext-1: Must have either extensions or value[x], not both
  extension.exists() != value.exists()

• rim: n/a
• rim: N/A

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

• ele-1: All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())
• ext-1: Must have either extensions or value[x], not both
  extension.exists() != value.exists()

• rim: n/a
• rim: N/A

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

• ele-1: All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())
• ext-1: Must have either extensions or value[x], not both
  extension.exists() != value.exists()

• rim: n/a
• rim: N/A

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

• ele-1: All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())
• ext-1: Must have either extensions or value[x], not both
  extension.exists() != value.exists()

• rim: n/a
• rim: N/A

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

• ele-1: All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())
• ext-1: Must have either extensions or value[x], not both
  extension.exists() != value.exists()

• rim: n/a
• rim: N/A

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

• ele-1: All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())
• ext-1: Must have either extensions or value[x], not both
  extension.exists() != value.exists()

• rim: n/a
• rim: N/A

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

• ele-1: All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())
• ext-1: Must have either extensions or value[x], not both
  extension.exists() != value.exists()

• rim: n/a
• rim: N/A

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

• ele-1: All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())
• ext-1: Must have either extensions or value[x], not both
  extension.exists() != value.exists()

• rim: n/a
• rim: N/A

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

• ele-1: All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())
• ext-1: Must have either extensions or value[x], not both
  extension.exists() != value.exists()

• rim: n/a
• rim: N/A

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

• ele-1: All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())
• ext-1: Must have either extensions or value[x], not both
  extension.exists() != value.exists()

• rim: n/a
• rim: N/A

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

• ele-1: All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())
• ext-1: Must have either extensions or value[x], not both
  extension.exists() != value.exists()

• rim: n/a
• rim: N/A

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

• ele-1: All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())
• ext-1: Must have either extensions or value[x], not both
  extension.exists() != value.exists()

• rim: n/a
• rim: N/A

• ele-1: All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())

• rim: n/a
• v2: CX / EI (occasionally, more often EI maps to a resource id or a URL)
• rim: II - see see identifier pattern at http://wiki.hl7.org/index.php?title=Common_Design_Patterns#Identifier_Pattern for relevant discussion. The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT]
• servd: Identifier
• w5: id

Note that FHIR strings may not exceed 1MB in size

• ele-1: All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())

• rim: n/a

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

• ele-1: All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())
• ext-1: Must have either extensions or value[x], not both
  extension.exists() != value.exists()

• rim: n/a
• rim: N/A

Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one. Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

• ele-1: All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())

• rim: n/a
• v2: N/A
• rim: Role.code or implied by context

Allows users to make use of identifiers when the identifier system is not known.

This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage.

Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

• ele-1: All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())

• rim: n/a
• v2: CE/CNE/CWE
• rim: CD
• orim: fhir:CodeableConcept rdfs:subClassOf dt:CD
• v2: CX.5
• rim: Role.code or implied by context

There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

see http://en.wikipedia.org/wiki/Uniform_resource_identifier

• ele-1: All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())

http://roche.com/fhir/rdc/sid/device-identifier

• rim: n/a
• v2: CX.4 / EI-2-4
• rim: II.root or Role.id.root
• servd: ./IdentifierType
• ACSPIX2FHIR: http://roche.com/fhir/rdc/sid/device-identifier
• GREENDOT: http://roche.com/fhir/rdc/sid/device-identifier
• CDF2FHIR: http://roche.com/fhir/rdc/sid/device-identifier

If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension.

• ele-1: All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())

• rim: n/a
• v2: CX.1 / EI.1
• rim: II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root)
• servd: ./Value
• ACSPIX2FHIR: partNumber ? `${source}/${partNumber}/${serialNumber}` : `${source}/${serialNumber}
• GREENDOT: Greendot/device model/device serial number
• CDF2FHIR: partNumber ? {source}/{partNumber}/{serialNumber} : {source}/{serialNumber}

This is not a duration - that's a measure of time (a separate type), but a duration that occurs at a fixed value of time. A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). If duration is required, specify the type as Interval|Duration.

• ele-1: All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())
• per-1: If present, start SHALL have a lower value than end
  start.empty() or end.empty() or (start <= end)

• rim: n/a
• v2: DR
• rim: IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"]
• v2: CX.7 + CX.8
• rim: Role.effectiveTime or implied by context
• servd: ./StartDate and ./EndDate

The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.

• ele-1: All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())
• ref-1: SHALL have a contained resource if a local reference is provided
  reference.startsWith('#').not() or (reference.substring(1).trace('url') in %resource.contained.id.trace('ids'))

• rim: n/a
• rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity)
• v2: CX.4 / (CX.4,CX.9,CX.10)
• rim: II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper
• servd: ./IdentifierIssuingAuthority

DeviceComponent.type can be referred to either GDMN (nomenclature system supported by FDA Global UDI Database) or preferable RTMMS coding system.

• ele-1: All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())

• rim: n/a
• v2: CE/CNE/CWE
• rim: CD
• orim: fhir:CodeableConcept rdfs:subClassOf dt:CD
• w5: class

Note that FHIR strings may not exceed 1MB in size

• ele-1: All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())

• rim: n/a

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

• ele-1: All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())
• ext-1: Must have either extensions or value[x], not both
  extension.exists() != value.exists()

• rim: n/a
• rim: N/A

Allows for translations and alternate encodings within a code system. Also supports communication of the same instance to systems requiring different encodings.

Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

• ele-1: All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())

• rim: n/a
• v2: CE/CNE/CWE subset one of the sets of component 1-3 or 4-6
• rim: CV
• orim: fhir:Coding rdfs:subClassOf dt:CDCoding
• v2: C*E.1-8, C*E.10-22
• rim: union(., ./translation)
• orim: fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding

Note that FHIR strings may not exceed 1MB in size

• ele-1: All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())

• rim: n/a

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

• ele-1: All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())
• ext-1: Must have either extensions or value[x], not both
  extension.exists() != value.exists()

• rim: n/a
• rim: N/A

Need to be unambiguous about the source of the definition of the symbol.

The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously.

• ele-1: All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())

• rim: n/a
• v2: C*E.3
• rim: ./codeSystem
• orim: fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem
• ACSPIX2FHIR: isMeter? http://roche.com/fhir/rdc/cdf : http://snomed.info/sct
• GREENDOT: http://roche.com/fhir/rdc/cs
• CDF2FHIR: isMeter? http://roche.com/fhir/rdc/cdf : http://snomed.info/sct

Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.

• ele-1: All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())

• rim: n/a
• v2: C*E.7
• rim: ./codeSystemVersion
• orim: fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion

Need to refer to a particular code in the system.

Note that FHIR strings may not exceed 1MB in size

• ele-1: All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())

• rim: n/a
• v2: C*E.1
• rim: ./code
• orim: fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code
• ACSPIX2FHIR: isMeter ? cdf.dev.bgmeter : 69805005
• GREENDOT: smartPhone
• CDF2FHIR: isMeter ? cdf.dev.bgmeter : 69805005

Need to be able to carry a human-readable meaning of the code for readers that do not know the system.

Note that FHIR strings may not exceed 1MB in size

• ele-1: All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())

• rim: n/a
• v2: C*E.2 - but note this is not well followed
• rim: CV.displayName
• orim: fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName
• ACSPIX2FHIR: isMeter ? Glucometer : Insulin Pump
• GREENDOT: Smart Phone
• CDF2FHIR: isMeter ? Glucometer : Insulin Pump

This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.

Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.

• ele-1: All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())

• rim: n/a
• v2: Sometimes implied by being first
• rim: CD.codingRationale
• orim: fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]

The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

Very often the text is the same as a displayName of one of the codings.

• ele-1: All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())

• rim: n/a
• v2: C*E.9. But note many systems use C*E.2 for this
• rim: ./originalText[mediaType/code="text/plain"]/data
• orim: fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText

Note: This is intended for precisely observed times, typically system logs etc., and not human-reported times - for them, see date and dateTime below. Time zone is always required

• ele-1: All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())

• rim: n/a
• w5: when.init
• ACSPIX2FHIR: Dt+Tm
• GLUCI-CHEK: DEVICE.Dt
• GLUCI-CHEK: DEVICE.Tm

References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.

• ele-1: All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())
• ref-1: SHALL have a contained resource if a local reference is provided
  reference.startsWith('#').not() or (reference.substring(1).trace('url') in %resource.contained.id.trace('ids'))

• rim: n/a
• rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity)

Note that FHIR strings may not exceed 1MB in size

• ele-1: All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())

• rim: n/a

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

• ele-1: All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())
• ext-1: Must have either extensions or value[x], not both
  extension.exists() != value.exists()

• rim: n/a
• rim: N/A

Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

• ele-1: All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())

• rim: n/a
• rim: N/A
• ACSPIX2FHIR: Device/${deviceId}
• GREENDOT: Device/{DeviceId}
• CDF2FHIR: Device/{deviceId}

When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.

When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference

Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

• ele-1: All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())

• rim: n/a
• v2: CX / EI (occasionally, more often EI maps to a resource id or a URL)
• rim: II - see see identifier pattern at http://wiki.hl7.org/index.php?title=Common_Design_Patterns#Identifier_Pattern for relevant discussion. The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT]
• servd: Identifier
• rim: .identifier

This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.

• ele-1: All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())

• rim: n/a
• rim: N/A

References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.

• ele-1: All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())
• ref-1: SHALL have a contained resource if a local reference is provided
  reference.startsWith('#').not() or (reference.substring(1).trace('url') in %resource.contained.id.trace('ids'))

• rim: n/a
• rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity)

OperationalStatus for the MDS, VMD, or Channel will be bound to a specific ValueSet that is defined in its profile.

• ele-1: All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())

• rim: n/a
• v2: CE/CNE/CWE
• rim: CD
• orim: fhir:CodeableConcept rdfs:subClassOf dt:CD

Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination.

• ele-1: All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())

• rim: n/a
• v2: CE/CNE/CWE
• rim: CD
• orim: fhir:CodeableConcept rdfs:subClassOf dt:CD

Omit .measurementPrinciple if other than Glucometer (e.g. IP) "impedance" used for glucometers.

• ele-1: All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())

• rim: n/a
• ACSPIX2FHIR: impedance
• GREENDOT: optical
• CDF2FHIR: impedance

• ele-1: All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())

• rim: n/a

Note that FHIR strings may not exceed 1MB in size

• ele-1: All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())

• rim: n/a

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

• ele-1: All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())
• ext-1: Must have either extensions or value[x], not both
  extension.exists() != value.exists()

• rim: n/a
• rim: N/A

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

• ele-1: All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())
• ext-1: Must have either extensions or value[x], not both
  extension.exists() != value.exists()

• rim: n/a
• rim: N/A

Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination.

• ele-1: All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())

• rim: n/a
• v2: CE/CNE/CWE
• rim: CD
• orim: fhir:CodeableConcept rdfs:subClassOf dt:CD

Note that FHIR strings may not exceed 1MB in size

• ele-1: All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())

• rim: n/a

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

• ele-1: All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())
• ext-1: Must have either extensions or value[x], not both
  extension.exists() != value.exists()

• rim: n/a
• rim: N/A

Allows for translations and alternate encodings within a code system. Also supports communication of the same instance to systems requiring different encodings.

Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

• ele-1: All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())

• rim: n/a
• v2: CE/CNE/CWE subset one of the sets of component 1-3 or 4-6
• rim: CV
• orim: fhir:Coding rdfs:subClassOf dt:CDCoding
• v2: C*E.1-8, C*E.10-22
• rim: union(., ./translation)
• orim: fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding

Note that FHIR strings may not exceed 1MB in size

• ele-1: All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())

• rim: n/a

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

• ele-1: All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())
• ext-1: Must have either extensions or value[x], not both
  extension.exists() != value.exists()

• rim: n/a
• rim: N/A

Need to be unambiguous about the source of the definition of the symbol.

The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously.

• ele-1: All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())

• rim: n/a
• v2: C*E.3
• rim: ./codeSystem
• orim: fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem
• ACSPIX2FHIR: http://hl7.org/fhir/specification-type
• GREENDOT: http://hl7.org/fhir/specification-type
• CDF2FHIR: http://hl7.org/fhir/specification-type

Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.

• ele-1: All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())

• rim: n/a
• v2: C*E.7
• rim: ./codeSystemVersion
• orim: fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion

Need to refer to a particular code in the system.

Note that FHIR strings may not exceed 1MB in size

• ele-1: All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())

• rim: n/a
• v2: C*E.1
• rim: ./code
• orim: fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code
• ACSPIX2FHIR: serial-number[0] : part-number[1] : unspecified[2]
• GREENDOT: serial-number[0] : part-number[1] : unspecified[2] : part-number[3] : hardware-revision[4] : software-revision[5] : firmware-revision[6]
• CDF2FHIR: serial-number[0] : part-number[1] : unspecified[2]

Need to be able to carry a human-readable meaning of the code for readers that do not know the system.

Note that FHIR strings may not exceed 1MB in size

• ele-1: All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())

• rim: n/a
• v2: C*E.2 - but note this is not well followed
• rim: CV.displayName
• orim: fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName
• ACSPIX2FHIR: Serial Number[0] : Part Number[1] : Unspecified Production Specification[2]
• GREENDOT: Serial Number[0] : Model Number [1] : Model Name[2] : Part Number[3] : Hardware Revision[4] : Software Revision[5] : Firmware Revision[6]
• CDF2FHIR: Serial Number[0] : Part Number[1] : Unspecified Production Specification[2]

This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.

Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.

• ele-1: All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())

• rim: n/a
• v2: Sometimes implied by being first
• rim: CD.codingRationale
• orim: fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]

The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

Very often the text is the same as a displayName of one of the codings.

• ele-1: All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())

• rim: n/a
• v2: C*E.9. But note many systems use C*E.2 for this
• rim: ./originalText[mediaType/code="text/plain"]/data
• orim: fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText

• ele-1: All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())

• rim: n/a
• v2: CX / EI (occasionally, more often EI maps to a resource id or a URL)
• rim: II - see see identifier pattern at http://wiki.hl7.org/index.php?title=Common_Design_Patterns#Identifier_Pattern for relevant discussion. The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT]
• servd: Identifier

Note that FHIR strings may not exceed 1MB in size

• ele-1: All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())

• rim: n/a
• ACSPIX2FHIR: SN[0] : ModelNum[1] : Name[2]
• GREENDOT: android.os.Build.FINGERPRINT[0] : android.os.Build.MODEL[1]: android.os.Build.VERSION.SDK_INT[2] : android.os.Build.VERSION.DEVICE[3]
• GLUCI-CHEK: DEVICE.Name
• GLUCI-CHEK: DEVICE.SN
• GLUCI-CHEK: DEVICE.ModelNum
• CDF2FHIR: SerialNumber[0] : ModelUID[1] : ModelName[2]

Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination.

• ele-1: All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())

• rim: n/a
• v2: CE/CNE/CWE
• rim: CD
• orim: fhir:CodeableConcept rdfs:subClassOf dt:CD