Test | MeasureReport - SIMPLIFIER.NET

MeasureReport	I		DomainResource	Element id MeasureReport Short description Results of a measure evaluation Definition The MeasureReport resource contains the results of evaluating a measure. Data type DomainResource Constraints dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources `contained.contained.empty()` dom-1: If the resource is contained in another resource, it SHALL NOT contain any narrative `contained.text.empty()` dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated `contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()` dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource `contained.where(('#'+id in %resource.descendants().reference).not()).empty()` Mappings rim: Entity. Role, or Act workflow: Event w5: clinical.general
id	Σ	0..1	id	There are no (further) constraints on this element Element id MeasureReport.id Short description Logical id of this artifact Definition The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes. Comments The only time that a resource does not have an id is when it is being submitted to the server using a create operation. Data type id
meta	Σ	0..1	Meta	There are no (further) constraints on this element Element id MeasureReport.meta Short description Metadata about the resource Definition The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content may not always be associated with version changes to the resource. Data type Meta
implicitRules	Σ ?!	0..1	uri	There are no (further) constraints on this element Element id MeasureReport.implicitRules Short description A set of rules under which this content was created Definition A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Comments Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. This element is labelled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation. Data type uri
language		0..1	codeBinding	There are no (further) constraints on this element Element id MeasureReport.language Short description Language of the resource content Definition The base language in which the resource is written. Comments Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute). Data type code Binding A human language. ?? (extensible)
text	I	0..1	Narrative	There are no (further) constraints on this element Element id MeasureReport.text Short description Text summary of the resource, for human interpretation Alternate names narrative, html, xhtml, display Definition A human-readable narrative that contains a summary of the resource, and may be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety. Comments Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded in formation is added later. Data type Narrative Mappings rim: Act.text?
contained		0..*	Resource	There are no (further) constraints on this element Element id MeasureReport.contained Short description Contained, inline Resources Alternate names inline resources, anonymous resources, contained resources Definition These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope. Comments This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Data type Resource Mappings rim: N/A
extension		0..*	Extension	There are no (further) constraints on this element Element id MeasureReport.extension Short description Additional Content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the resource. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Mappings rim: N/A
modifierExtension	?!	0..*	Extension	There are no (further) constraints on this element Element id MeasureReport.modifierExtension Short description Extensions that cannot be ignored Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the resource, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Mappings rim: N/A
identifier	Σ	0..1	Identifier	Element id MeasureReport.identifier Short description Additional identifier for the Report Definition A formal identifier that is used to identify this report when it is represented in other formats, or referenced in a specification, model, design or an instance. Requirements Allows externally provided and/or usable business identifiers to be easily associated with the module. Comments Typically, this is used for identifiers that can go in an HL7 v3 II data type - e.g. to identify this {{title}} outside of FHIR, where the logical URL is not possible to use. Data type Identifier Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CX / EI (occasionally, more often EI maps to a resource id or a URL) rim: II - see see identifier pattern at http://wiki.hl7.org/index.php?title=Common_Design_Patterns#Identifier_Pattern for relevant discussion. The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd: Identifier w5: id
status	Σ ?!	1..1	codeBinding	Element id MeasureReport.status Short description complete \| pending \| error Definition The report status. No data will be available until the report status is complete. Data type code Binding The status of the measure report ?? (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings workflow: Event.status w5: status
type	Σ	1..1	codeBinding	Element id MeasureReport.type Short description individual \| patient-list \| summary Definition The type of measure report. This may be an individual report, which provides a single patient's score for the measure; a patient listing, which returns the list of patients that meet the various criteria in the measure; or a summary report, which returns a population count for each of the criteria in the measure. Comments This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid. Data type code Binding The type of the measure report ?? (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings workflow: Event.code w5: class
measure	Σ I	1..1	Reference(Measure)	Element id MeasureReport.measure Short description What measure was evaluated Definition A reference to the Measure that was evaluated to produce this report. Comments References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository. Data type Reference(Measure) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %resource.contained.id.trace('ids'))` Mappings rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity) workflow: Event.definition w5: what
patient	Σ I	0..1	Reference(Patient)	Element id MeasureReport.patient Short description What patient the report is for Definition Optional Patient if the report was requested for a single patient. Comments References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository. Data type Reference(Patient) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %resource.contained.id.trace('ids'))` Mappings rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity) workflow: Event.subject w5: who.focus
date	Σ	0..1	dateTime	Element id MeasureReport.date Short description When the report was generated Definition The date this measure report was generated. Data type dateTime Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings workflow: Event.occurrenceDateTime w5: when.recorded
reportingOrganization	Σ I	0..1	Reference(Organization)	Element id MeasureReport.reportingOrganization Short description Who is reporting the data Definition Reporting Organization. Comments References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository. Data type Reference(Organization) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %resource.contained.id.trace('ids'))` Mappings rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity) w5: who.source
period	Σ I	1..1	Period	Element id MeasureReport.period Short description What period the report covers Definition The reporting period for which the report was calculated. Comments This is not a duration - that's a measure of time (a separate type), but a duration that occurs at a fixed value of time. A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). If duration is required, specify the type as Interval\|Duration. Data type Period Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` per-1: If present, start SHALL have a lower value than end `start.empty() or end.empty() or (start <= end)` Mappings rim: n/a v2: DR rim: IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"]
group		0..*	BackboneElement	Element id MeasureReport.group Short description Measure results for each group Definition The results of the calculation, one for each population group in the measure. Data type BackboneElement Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a
id		0..1	string	There are no (further) constraints on this element Element id MeasureReport.group.id Short description xml:id (or equivalent in JSON) Definition unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension		0..*	Extension	There are no (further) constraints on this element Element id MeasureReport.group.extension Short description Additional Content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Mappings rim: n/a
modifierExtension	Σ ?!	0..*	Extension	There are no (further) constraints on this element Element id MeasureReport.group.modifierExtension Short description Extensions that cannot be ignored Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Mappings rim: N/A
identifier		1..1	Identifier	Element id MeasureReport.group.identifier Short description What group of the measure Definition The identifier of the population group as defined in the measure definition. Data type Identifier Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CX / EI (occasionally, more often EI maps to a resource id or a URL) rim: II - see see identifier pattern at http://wiki.hl7.org/index.php?title=Common_Design_Patterns#Identifier_Pattern for relevant discussion. The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd: Identifier
population		0..*	BackboneElement	Element id MeasureReport.group.population Short description The populations in the group Definition The populations that make up the population group, one for each type of population appropriate for the measure. Data type BackboneElement Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a
id		0..1	string	There are no (further) constraints on this element Element id MeasureReport.group.population.id Short description xml:id (or equivalent in JSON) Definition unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension		0..*	Extension	There are no (further) constraints on this element Element id MeasureReport.group.population.extension Short description Additional Content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Mappings rim: n/a
modifierExtension	Σ ?!	0..*	Extension	There are no (further) constraints on this element Element id MeasureReport.group.population.modifierExtension Short description Extensions that cannot be ignored Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Mappings rim: N/A
identifier	Σ	0..1	Identifier	Element id MeasureReport.group.population.identifier Short description Population identifier as defined in the measure Definition The identifier of the population being reported, as defined by the population element of the measure. Data type Identifier Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CX / EI (occasionally, more often EI maps to a resource id or a URL) rim: II - see see identifier pattern at http://wiki.hl7.org/index.php?title=Common_Design_Patterns#Identifier_Pattern for relevant discussion. The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd: Identifier
code	Σ	0..1	CodeableConceptBinding	Element id MeasureReport.group.population.code Short description initial-population \| numerator \| numerator-exclusion \| denominator \| denominator-exclusion \| denominator-exception \| measure-population \| measure-population-exclusion \| measure-score Definition The type of the population. Comments Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination. Data type CodeableConcept Binding The type of population (e.g. initial, numerator, denominator, etc.) ?? (extensible) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD
count		0..1	integer	Element id MeasureReport.group.population.count Short description Size of the population Definition The number of members of the population. Comments 32 bit number; for values larger than this, use decimal Data type integer Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())`
patients	I	0..1	Reference(List)	Element id MeasureReport.group.population.patients Short description For patient-list reports, the patients in this population Definition This element refers to a List of patient level MeasureReport resources, one for each patient in this population. Comments References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository. Data type Reference(List) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %resource.contained.id.trace('ids'))` Mappings rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity)
measureScore	Σ	0..1	decimal	Element id MeasureReport.group.measureScore Short description What score this group achieved Definition The measure score for this population group, calculated as appropriate for the measure type and scoring method, and based on the contents of the populations defined in the group. Comments Do not use a IEEE type floating point type, instead use something that works like a true decimal, with inbuilt precision (e.g. Java BigInteger) Data type decimal Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())`
stratifier		0..*	BackboneElement	Element id MeasureReport.group.stratifier Short description Stratification results Definition When a measure includes multiple stratifiers, there will be a stratifier group for each stratifier defined by the measure. Data type BackboneElement Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a
id		0..1	string	There are no (further) constraints on this element Element id MeasureReport.group.stratifier.id Short description xml:id (or equivalent in JSON) Definition unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension		0..*	Extension	There are no (further) constraints on this element Element id MeasureReport.group.stratifier.extension Short description Additional Content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Mappings rim: n/a
modifierExtension	Σ ?!	0..*	Extension	There are no (further) constraints on this element Element id MeasureReport.group.stratifier.modifierExtension Short description Extensions that cannot be ignored Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Mappings rim: N/A
identifier		0..1	Identifier	Element id MeasureReport.group.stratifier.identifier Short description What stratifier of the group Definition The identifier of this stratifier, as defined in the measure definition. Data type Identifier Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CX / EI (occasionally, more often EI maps to a resource id or a URL) rim: II - see see identifier pattern at http://wiki.hl7.org/index.php?title=Common_Design_Patterns#Identifier_Pattern for relevant discussion. The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd: Identifier
stratum		0..*	BackboneElement	Element id MeasureReport.group.stratifier.stratum Short description Stratum results, one for each unique value in the stratifier Definition This element contains the results for a single stratum within the stratifier. For example, when stratifying on administrative gender, there will be four strata, one for each possible gender value. Data type BackboneElement Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a
id		0..1	string	There are no (further) constraints on this element Element id MeasureReport.group.stratifier.stratum.id Short description xml:id (or equivalent in JSON) Definition unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension		0..*	Extension	There are no (further) constraints on this element Element id MeasureReport.group.stratifier.stratum.extension Short description Additional Content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Mappings rim: n/a
modifierExtension	Σ ?!	0..*	Extension	There are no (further) constraints on this element Element id MeasureReport.group.stratifier.stratum.modifierExtension Short description Extensions that cannot be ignored Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Mappings rim: N/A
value		1..1	string	Element id MeasureReport.group.stratifier.stratum.value Short description The stratum value, e.g. male Definition The value for this stratum, expressed as a string. When defining stratifiers on complex values, the value must be rendered such that the value for each stratum within the stratifier is unique. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())`
population		0..*	BackboneElement	Element id MeasureReport.group.stratifier.stratum.population Short description Population results in this stratum Definition The populations that make up the stratum, one for each type of population appropriate to the measure. Data type BackboneElement Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a
id		0..1	string	There are no (further) constraints on this element Element id MeasureReport.group.stratifier.stratum.population.id Short description xml:id (or equivalent in JSON) Definition unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension		0..*	Extension	There are no (further) constraints on this element Element id MeasureReport.group.stratifier.stratum.population.extension Short description Additional Content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Mappings rim: n/a
modifierExtension	Σ ?!	0..*	Extension	There are no (further) constraints on this element Element id MeasureReport.group.stratifier.stratum.population.modifierExtension Short description Extensions that cannot be ignored Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Mappings rim: N/A
identifier	Σ	0..1	Identifier	Element id MeasureReport.group.stratifier.stratum.population.identifier Short description Population identifier as defined in the measure Definition The identifier of the population being reported, as defined by the population element of the measure. Data type Identifier Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CX / EI (occasionally, more often EI maps to a resource id or a URL) rim: II - see see identifier pattern at http://wiki.hl7.org/index.php?title=Common_Design_Patterns#Identifier_Pattern for relevant discussion. The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd: Identifier
code	Σ	0..1	CodeableConceptBinding	Element id MeasureReport.group.stratifier.stratum.population.code Short description initial-population \| numerator \| numerator-exclusion \| denominator \| denominator-exclusion \| denominator-exception \| measure-population \| measure-population-exclusion \| measure-score Definition The type of the population. Comments Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination. Data type CodeableConcept Binding The type of population (e.g. initial, numerator, denominator, etc.) ?? (extensible) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD
count		0..1	integer	Element id MeasureReport.group.stratifier.stratum.population.count Short description Size of the population Definition The number of members of the population in this stratum. Comments 32 bit number; for values larger than this, use decimal Data type integer Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())`
patients	I	0..1	Reference(List)	Element id MeasureReport.group.stratifier.stratum.population.patients Short description For patient-list reports, the patients in this population Definition This element refers to a List of patient level MeasureReport resources, one for each patient in this population in this stratum. Comments References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository. Data type Reference(List) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %resource.contained.id.trace('ids'))` Mappings rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity)
measureScore	Σ	0..1	decimal	Element id MeasureReport.group.stratifier.stratum.measureScore Short description What score this stratum achieved Definition The measure score for this stratum, calculated as appropriate for the measure type and scoring method, and based on only the members of this stratum. Comments Do not use a IEEE type floating point type, instead use something that works like a true decimal, with inbuilt precision (e.g. Java BigInteger) Data type decimal Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())`
evaluatedResources	I	0..1	Reference(Bundle)	Element id MeasureReport.evaluatedResources Short description What data was evaluated to produce the measure score Definition A reference to a Bundle containing the Resources that were used in the evaluation of this report. Comments References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository. Data type Reference(Bundle) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %resource.contained.id.trace('ids'))` Mappings rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity)

Documentation:

https://simplifier.net/test20171049/measurereport

Last updated on 1/24/2018, 10:23:01 AM

Confirmation

MeasureReport

About

Information

Follow us

Links