All ValueSets

HTML View

ValueSet 'UKCoreAddressKeyType'

A set of codes that define the type of Address Key.

Contact Information

HL7 UK

Email: ukcore@hl7.org.uk

• Import all codes from CodeSystem UKCoreAddressKeyType

Expansion

This expansion was generated on 2021-09-10T07:49:44+00:00

This value set contains 2 concepts

Table View

XML View

<ValueSet xmlns="http://hl7.org/fhir">
    <id value="UKCore-AddressKeyType" />
    <url value="https://fhir.hl7.org.uk/ValueSet/UKCore-AddressKeyType" />
    <version value="2.1.0" />
    <name value="UKCoreAddressKeyType" />
    <title value="UK Core Address Key Type" />
    <status value="active" />
    <date value="2021-09-10" />
    <publisher value="HL7 UK" />
    <contact>
        <name value="HL7 UK" />
        <telecom>
            <system value="email" />
            <value value="ukcore@hl7.org.uk" />
            <use value="work" />
            <rank value="1" />
        </telecom>
    </contact>
    <description value="A set of codes that define the type of Address Key." />
    <copyright value="Copyright &#169; 2021+ HL7 UK Licensed under the Apache License, Version 2.0 (the &quot;License&quot;); you may not use this file except in compliance with the License. You may obtain a copy of the License at  http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an &quot;AS IS&quot; BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. HL7&#174; FHIR&#174; standard Copyright &#169; 2011+ HL7 The HL7&#174; FHIR&#174; standard is used under the FHIR license. You may obtain a copy of the FHIR license at  https://www.hl7.org/fhir/license.html." />
    <compose>
        <include>
            <system value="https://fhir.hl7.org.uk/CodeSystem/UKCore-AddressKeyType" />
        </include>
    </compose>
    <expansion>
        <identifier value="ecf148bc-2e81-4fd0-b411-d54020d64198" />
        <timestamp value="2021-09-10T07:49:44+00:00" />
        <total value="2" />
        <offset value="0" />
        <parameter>
            <name value="version" />
            <valueUri value="https://fhir.hl7.org.uk/CodeSystem/UKCore-AddressKeyType|2.1.0" />
        </parameter>
        <parameter>
            <name value="count" />
            <valueInteger value="2147483647" />
        </parameter>
        <parameter>
            <name value="offset" />
            <valueInteger value="0" />
        </parameter>
        <contains>
            <system value="https://fhir.hl7.org.uk/CodeSystem/UKCore-AddressKeyType" />
            <code value="PAF" />
            <display value="Postcode Address File" />
        </contains>
        <contains>
            <system value="https://fhir.hl7.org.uk/CodeSystem/UKCore-AddressKeyType" />
            <code value="UPRN" />
            <display value="Unique Property Reference Number" />
        </contains>
    </expansion>
</ValueSet>

JSON View

{
    "resourceType": "ValueSet",
    "id": "UKCore-AddressKeyType",
    "url": "https://fhir.hl7.org.uk/ValueSet/UKCore-AddressKeyType",
    "version": "2.1.0",
    "name": "UKCoreAddressKeyType",
    "title": "UK Core Address Key Type",
    "status": "active",
    "date": "2021-09-10",
    "publisher": "HL7 UK",
    "contact":  [
        {
            "name": "HL7 UK",
            "telecom":  [
                {
                    "system": "email",
                    "value": "ukcore@hl7.org.uk",
                    "use": "work",
                    "rank": 1
                }
            ]
        }
    ],
    "description": "A set of codes that define the type of Address Key.",
    "copyright": "Copyright © 2021+ HL7 UK Licensed under the Apache License, Version 2.0 (the \"License\"); you may not use this file except in compliance with the License. You may obtain a copy of the License at  http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an \"AS IS\" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. HL7® FHIR® standard Copyright © 2011+ HL7 The HL7® FHIR® standard is used under the FHIR license. You may obtain a copy of the FHIR license at  https://www.hl7.org/fhir/license.html.",
    "compose": {
        "include":  [
            {
                "system": "https://fhir.hl7.org.uk/CodeSystem/UKCore-AddressKeyType"
            }
        ]
    },
    "expansion": {
        "identifier": "ecf148bc-2e81-4fd0-b411-d54020d64198",
        "timestamp": "2021-09-10T07:49:44+00:00",
        "total": 2,
        "offset": 0,
        "parameter":  [
            {
                "name": "version",
                "valueUri": "https://fhir.hl7.org.uk/CodeSystem/UKCore-AddressKeyType|2.1.0"
            },
            {
                "name": "count",
                "valueInteger": 2147483647
            },
            {
                "name": "offset",
                "valueInteger": 0
            }
        ],
        "contains":  [
            {
                "system": "https://fhir.hl7.org.uk/CodeSystem/UKCore-AddressKeyType",
                "code": "PAF",
                "display": "Postcode Address File"
            },
            {
                "system": "https://fhir.hl7.org.uk/CodeSystem/UKCore-AddressKeyType",
                "code": "UPRN",
                "display": "Unique Property Reference Number"
            }
        ]
    }
}

HTML View

ValueSet 'UKCoreAdmissionMethod'

A set of codes that define the method of admission to a hospital provider spell.

Contact Information

HL7 UK

Email: ukcore@hl7.org.uk

• Import all codes from CodeSystem UKCoreAdmissionMethodEngland
• Import all codes from CodeSystem UKCoreAdmissionMethodWales

Expansion

This expansion was generated on 2022-01-10T14:51:00+00:00

This value set contains 35 concepts

Table View

XML View

<ValueSet xmlns="http://hl7.org/fhir">
    <id value="UKCore-AdmissionMethod" />
    <url value="https://fhir.hl7.org.uk/ValueSet/UKCore-AdmissionMethod" />
    <version value="2.1.0" />
    <name value="UKCoreAdmissionMethod" />
    <title value="UK Core Admission Method" />
    <status value="active" />
    <date value="2022-01-07" />
    <publisher value="HL7 UK" />
    <contact>
        <name value="HL7 UK" />
        <telecom>
            <system value="email" />
            <value value="ukcore@hl7.org.uk" />
            <use value="work" />
            <rank value="1" />
        </telecom>
    </contact>
    <description value="A set of codes that define the method of admission to a hospital provider spell." />
    <copyright value="Copyright &#169; 2021+ HL7 UK Licensed under the Apache License, Version 2.0 (the &quot;License&quot;); you may not use this file except in compliance with the License.  You may obtain a copy of the License at  http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an &quot;AS IS&quot; BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. HL7&#174; FHIR&#174; standard Copyright &#169; 2011+ HL7 The HL7&#174; FHIR&#174; standard is used under the FHIR license. You may obtain a copy of the FHIR license at  https://www.hl7.org/fhir/license.html." />
    <compose>
        <include>
            <system value="https://fhir.hl7.org.uk/CodeSystem/UKCore-AdmissionMethodEngland" />
        </include>
        <include>
            <system value="https://fhir.hl7.org.uk/CodeSystem/UKCore-AdmissionMethodWales" />
        </include>
    </compose>
    <expansion>
        <identifier value="00d23c0f-fd6c-4c40-9db8-961d5792f61d" />
        <timestamp value="2022-01-10T14:51:00+00:00" />
        <total value="35" />
        <offset value="0" />
        <parameter>
            <name value="version" />
            <valueUri value="https://fhir.hl7.org.uk/CodeSystem/UKCore-AdmissionMethodEngland|1.0.0" />
        </parameter>
        <parameter>
            <name value="version" />
            <valueUri value="https://fhir.hl7.org.uk/CodeSystem/UKCore-AdmissionMethodWales|1.0.0" />
        </parameter>
        <parameter>
            <name value="count" />
            <valueInteger value="2147483647" />
        </parameter>
        <parameter>
            <name value="offset" />
            <valueInteger value="0" />
        </parameter>
        <contains>
            <system value="https://fhir.hl7.org.uk/CodeSystem/UKCore-AdmissionMethodEngland" />
            <version value="1.0.0" />
            <code value="99" />
            <display value="Admission Method not known" />
        </contains>
        <contains>
            <system value="https://fhir.hl7.org.uk/CodeSystem/UKCore-AdmissionMethodEngland" />
            <version value="1.0.0" />
            <code value="12" />
            <display value="Elective Admission: Booked" />
        </contains>
        <contains>
            <system value="https://fhir.hl7.org.uk/CodeSystem/UKCore-AdmissionMethodWales" />
            <version value="1.0.0" />
            <code value="12" />
            <display value="Elective Admission: Booked" />
        </contains>
        <contains>
            <system value="https://fhir.hl7.org.uk/CodeSystem/UKCore-AdmissionMethodEngland" />
            <version value="1.0.0" />
            <code value="13" />
            <display value="Elective Admission: Planned" />
        </contains>
        <contains>
            <system value="https://fhir.hl7.org.uk/CodeSystem/UKCore-AdmissionMethodWales" />
            <version value="1.0.0" />
            <code value="13" />
            <display value="Elective Admission: Planned" />
        </contains>
        <contains>
            <system value="https://fhir.hl7.org.uk/CodeSystem/UKCore-AdmissionMethodEngland" />
            <version value="1.0.0" />
            <code value="11" />
            <display value="Elective Admission: Waiting list" />
        </contains>
        <contains>
            <system value="https://fhir.hl7.org.uk/CodeSystem/UKCore-AdmissionMethodWales" />
            <version value="1.0.0" />
            <code value="11" />
            <display value="Elective Admission: Waiting list" />
        </contains>
        <contains>
            <system value="https://fhir.hl7.org.uk/CodeSystem/UKCore-AdmissionMethodWales" />
            <version value="1.0.0" />
            <code value="21" />
            <display value="Emergency Admission: A &amp; E or dental casualty department of the health care provider" />
        </contains>
        <contains>
            <system value="https://fhir.hl7.org.uk/CodeSystem/UKCore-AdmissionMethodEngland" />
            <version value="1.0.0" />
            <code value="25" />
            <display value="Emergency Admission: Admission via Mental Health Crisis Resolution Team" />
        </contains>
        <contains>
            <system value="https://fhir.hl7.org.uk/CodeSystem/UKCore-AdmissionMethodEngland" />
            <version value="1.0.0" />
            <code value="2C" />
            <display value="Emergency Admission: Baby born at home as intended" />
        </contains>
        <contains>
            <system value="https://fhir.hl7.org.uk/CodeSystem/UKCore-AdmissionMethodEngland" />
            <version value="1.0.0" />
            <code value="23" />
            <display value="Emergency Admission: Bed bureau" />
        </contains>
        <contains>
            <system value="https://fhir.hl7.org.uk/CodeSystem/UKCore-AdmissionMethodWales" />
            <version value="1.0.0" />
            <code value="23" />
            <display value="Emergency Admission: Bed bureau" />
        </contains>
        <contains>
            <system value="https://fhir.hl7.org.uk/CodeSystem/UKCore-AdmissionMethodWales" />
            <version value="1.0.0" />
            <code value="24" />
            <display value="Emergency Admission: Consultant clinic of this or another health care provider" />
        </contains>
        <contains>
            <system value="https://fhir.hl7.org.uk/CodeSystem/UKCore-AdmissionMethodEngland" />
            <version value="1.0.0" />
            <code value="24" />
            <display value="Emergency Admission: Consultant Clinic, of this or another Health Care Provider" />
        </contains>
        <contains>
            <system value="https://fhir.hl7.org.uk/CodeSystem/UKCore-AdmissionMethodWales" />
            <version value="1.0.0" />
            <code value="25" />
            <display value="Emergency Admission: Domiciliary visit by Consultant" />
        </contains>
        <contains>
            <system value="https://fhir.hl7.org.uk/CodeSystem/UKCore-AdmissionMethodEngland" />
            <version value="1.0.0" />
            <code value="2A" />
            <display value="Emergency Admission: Emergency Care Department of another provider where the Patient had not been admitted" />
        </contains>
        <contains>
            <system value="https://fhir.hl7.org.uk/CodeSystem/UKCore-AdmissionMethodEngland" />
            <version value="1.0.0" />
            <code value="21" />
            <display value="Emergency Admission: Emergency Care Department or dental casualty department of the Health Care Provider" />
        </contains>
        <contains>
            <system value="https://fhir.hl7.org.uk/CodeSystem/UKCore-AdmissionMethodEngland" />
            <version value="1.0.0" />
            <code value="22" />
            <display value="Emergency Admission: General Practitioner: after a request for immediate admission has been made direct to a Hospital Provider, i.e. not through a Bed bureau, by a General Practitioner or deputy" />
        </contains>
        <contains>
            <system value="https://fhir.hl7.org.uk/CodeSystem/UKCore-AdmissionMethodWales" />
            <version value="1.0.0" />
            <code value="22" />
            <display value="Emergency Admission: GP: after a request for immediate admission has been made direct to a hospital provider (i.e. not through a Bed Bureau) by a General Practitioner or deputy" />
        </contains>
        <contains>
            <system value="https://fhir.hl7.org.uk/CodeSystem/UKCore-AdmissionMethodEngland" />
            <version value="1.0.0" />
            <code value="2D" />
            <display value="Emergency Admission: Other emergency admission" />
        </contains>
        <contains>
            <system value="https://fhir.hl7.org.uk/CodeSystem/UKCore-AdmissionMethodEngland" />
            <version value="1.0.0" />
            <code value="28" />
            <display value="Emergency Admission: Other means, examples are: - admitted from the Emergency Care Department of another provider where they had not been admitted - transfer of an admitted Patient from another Hospital Provider in an emergency - baby born at home as intended" />
        </contains>
        <contains>
            <system value="https://fhir.hl7.org.uk/CodeSystem/UKCore-AdmissionMethodWales" />
            <version value="1.0.0" />
            <code value="28" />
            <display value="Emergency Admission: Other means, including admitted from the A &amp; E department of another provider where they had not been admitted" />
        </contains>
        <contains>
            <system value="https://fhir.hl7.org.uk/CodeSystem/UKCore-AdmissionMethodEngland" />
            <version value="1.0.0" />
            <code value="2B" />
            <display value="Emergency Admission: Transfer of an admitted Patient from another Hospital Provider in an emergency" />
        </contains>
        <contains>
            <system value="https://fhir.hl7.org.uk/CodeSystem/UKCore-AdmissionMethodWales" />
            <version value="1.0.0" />
            <code value="27" />
            <display value="Emergency Admission: Via NHS Direct Services" />
        </contains>
        <contains>
            <system value="https://fhir.hl7.org.uk/CodeSystem/UKCore-AdmissionMethodEngland" />
            <version value="1.0.0" />
            <code value="31" />
            <display value="Maternity Admission: Admitted ante partum" />
        </contains>
        <contains>
            <system value="https://fhir.hl7.org.uk/CodeSystem/UKCore-AdmissionMethodWales" />
            <version value="1.0.0" />
            <code value="31" />
            <display value="Maternity Admission: Admitted ante-partum" />
        </contains>
        <contains>
            <system value="https://fhir.hl7.org.uk/CodeSystem/UKCore-AdmissionMethodEngland" />
            <version value="1.0.0" />
            <code value="32" />
            <display value="Maternity Admission: Admitted post partum" />
        </contains>
        <contains>
            <system value="https://fhir.hl7.org.uk/CodeSystem/UKCore-AdmissionMethodWales" />
            <version value="1.0.0" />
            <code value="32" />
            <display value="Maternity Admission: Admitted post-partum" />
        </contains>
        <contains>
            <system value="https://fhir.hl7.org.uk/CodeSystem/UKCore-AdmissionMethodEngland" />
            <version value="1.0.0" />
            <code value="98" />
            <display value="Not applicable" />
        </contains>
        <contains>
            <system value="https://fhir.hl7.org.uk/CodeSystem/UKCore-AdmissionMethodWales" />
            <version value="1.0.0" />
            <code value="83" />
            <display value="Other Admission: Baby born outside the health care provider (except when born at home as intended. In this case the baby is an emergency admission. e.g. if midwife&#39;s decision to admit the baby use Admission Method 28)" />
        </contains>
        <contains>
            <system value="https://fhir.hl7.org.uk/CodeSystem/UKCore-AdmissionMethodEngland" />
            <version value="1.0.0" />
            <code value="83" />
            <display value="Other Admission: Baby born outside the Health Care Provider except when born at home as intended" />
        </contains>
        <contains>
            <system value="https://fhir.hl7.org.uk/CodeSystem/UKCore-AdmissionMethodEngland" />
            <version value="1.0.0" />
            <code value="82" />
            <display value="Other Admission: The birth of a baby in this Health Care Provider" />
        </contains>
        <contains>
            <system value="https://fhir.hl7.org.uk/CodeSystem/UKCore-AdmissionMethodWales" />
            <version value="1.0.0" />
            <code value="82" />
            <display value="Other Admission: The birth of a baby in this health care provider" />
        </contains>
        <contains>
            <system value="https://fhir.hl7.org.uk/CodeSystem/UKCore-AdmissionMethodEngland" />
            <version value="1.0.0" />
            <code value="81" />
            <display value="Other Admission: Transfer of any admitted Patient from other Hospital Provider other than in an emergency" />
        </contains>
        <contains>
            <system value="https://fhir.hl7.org.uk/CodeSystem/UKCore-AdmissionMethodWales" />
            <version value="1.0.0" />
            <code value="81" />
            <display value="Other Admission: Transfer of any admitted patient from other hospital provider.  May be used for an elective or emergency transfer from other hospital provider." />
        </contains>
    </expansion>
</ValueSet>

JSON View

{
    "resourceType": "ValueSet",
    "id": "UKCore-AdmissionMethod",
    "url": "https://fhir.hl7.org.uk/ValueSet/UKCore-AdmissionMethod",
    "version": "2.1.0",
    "name": "UKCoreAdmissionMethod",
    "title": "UK Core Admission Method",
    "status": "active",
    "date": "2022-01-07",
    "publisher": "HL7 UK",
    "contact":  [
        {
            "name": "HL7 UK",
            "telecom":  [
                {
                    "system": "email",
                    "value": "ukcore@hl7.org.uk",
                    "use": "work",
                    "rank": 1
                }
            ]
        }
    ],
    "description": "A set of codes that define the method of admission to a hospital provider spell.",
    "copyright": "Copyright © 2021+ HL7 UK Licensed under the Apache License, Version 2.0 (the \"License\"); you may not use this file except in compliance with the License.  You may obtain a copy of the License at  http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an \"AS IS\" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. HL7® FHIR® standard Copyright © 2011+ HL7 The HL7® FHIR® standard is used under the FHIR license. You may obtain a copy of the FHIR license at  https://www.hl7.org/fhir/license.html.",
    "compose": {
        "include":  [
            {
                "system": "https://fhir.hl7.org.uk/CodeSystem/UKCore-AdmissionMethodEngland"
            },
            {
                "system": "https://fhir.hl7.org.uk/CodeSystem/UKCore-AdmissionMethodWales"
            }
        ]
    },
    "expansion": {
        "identifier": "00d23c0f-fd6c-4c40-9db8-961d5792f61d",
        "timestamp": "2022-01-10T14:51:00+00:00",
        "total": 35,
        "offset": 0,
        "parameter":  [
            {
                "name": "version",
                "valueUri": "https://fhir.hl7.org.uk/CodeSystem/UKCore-AdmissionMethodEngland|1.0.0"
            },
            {
                "name": "version",
                "valueUri": "https://fhir.hl7.org.uk/CodeSystem/UKCore-AdmissionMethodWales|1.0.0"
            },
            {
                "name": "count",
                "valueInteger": 2147483647
            },
            {
                "name": "offset",
                "valueInteger": 0
            }
        ],
        "contains":  [
            {
                "system": "https://fhir.hl7.org.uk/CodeSystem/UKCore-AdmissionMethodEngland",
                "version": "1.0.0",
                "code": "99",
                "display": "Admission Method not known"
            },
            {
                "system": "https://fhir.hl7.org.uk/CodeSystem/UKCore-AdmissionMethodEngland",
                "version": "1.0.0",
                "code": "12",
                "display": "Elective Admission: Booked"
            },
            {
                "system": "https://fhir.hl7.org.uk/CodeSystem/UKCore-AdmissionMethodWales",
                "version": "1.0.0",
                "code": "12",
                "display": "Elective Admission: Booked"
            },
            {
                "system": "https://fhir.hl7.org.uk/CodeSystem/UKCore-AdmissionMethodEngland",
                "version": "1.0.0",
                "code": "13",
                "display": "Elective Admission: Planned"
            },
            {
                "system": "https://fhir.hl7.org.uk/CodeSystem/UKCore-AdmissionMethodWales",
                "version": "1.0.0",
                "code": "13",
                "display": "Elective Admission: Planned"
            },
            {
                "system": "https://fhir.hl7.org.uk/CodeSystem/UKCore-AdmissionMethodEngland",
                "version": "1.0.0",
                "code": "11",
                "display": "Elective Admission: Waiting list"
            },
            {
                "system": "https://fhir.hl7.org.uk/CodeSystem/UKCore-AdmissionMethodWales",
                "version": "1.0.0",
                "code": "11",
                "display": "Elective Admission: Waiting list"
            },
            {
                "system": "https://fhir.hl7.org.uk/CodeSystem/UKCore-AdmissionMethodWales",
                "version": "1.0.0",
                "code": "21",
                "display": "Emergency Admission: A & E or dental casualty department of the health care provider"
            },
            {
                "system": "https://fhir.hl7.org.uk/CodeSystem/UKCore-AdmissionMethodEngland",
                "version": "1.0.0",
                "code": "25",
                "display": "Emergency Admission: Admission via Mental Health Crisis Resolution Team"
            },
            {
                "system": "https://fhir.hl7.org.uk/CodeSystem/UKCore-AdmissionMethodEngland",
                "version": "1.0.0",
                "code": "2C",
                "display": "Emergency Admission: Baby born at home as intended"
            },
            {
                "system": "https://fhir.hl7.org.uk/CodeSystem/UKCore-AdmissionMethodEngland",
                "version": "1.0.0",
                "code": "23",
                "display": "Emergency Admission: Bed bureau"
            },
            {
                "system": "https://fhir.hl7.org.uk/CodeSystem/UKCore-AdmissionMethodWales",
                "version": "1.0.0",
                "code": "23",
                "display": "Emergency Admission: Bed bureau"
            },
            {
                "system": "https://fhir.hl7.org.uk/CodeSystem/UKCore-AdmissionMethodWales",
                "version": "1.0.0",
                "code": "24",
                "display": "Emergency Admission: Consultant clinic of this or another health care provider"
            },
            {
                "system": "https://fhir.hl7.org.uk/CodeSystem/UKCore-AdmissionMethodEngland",
                "version": "1.0.0",
                "code": "24",
                "display": "Emergency Admission: Consultant Clinic, of this or another Health Care Provider"
            },
            {
                "system": "https://fhir.hl7.org.uk/CodeSystem/UKCore-AdmissionMethodWales",
                "version": "1.0.0",
                "code": "25",
                "display": "Emergency Admission: Domiciliary visit by Consultant"
            },
            {
                "system": "https://fhir.hl7.org.uk/CodeSystem/UKCore-AdmissionMethodEngland",
                "version": "1.0.0",
                "code": "2A",
                "display": "Emergency Admission: Emergency Care Department of another provider where the Patient had not been admitted"
            },
            {
                "system": "https://fhir.hl7.org.uk/CodeSystem/UKCore-AdmissionMethodEngland",
                "version": "1.0.0",
                "code": "21",
                "display": "Emergency Admission: Emergency Care Department or dental casualty department of the Health Care Provider"
            },
            {
                "system": "https://fhir.hl7.org.uk/CodeSystem/UKCore-AdmissionMethodEngland",
                "version": "1.0.0",
                "code": "22",
                "display": "Emergency Admission: General Practitioner: after a request for immediate admission has been made direct to a Hospital Provider, i.e. not through a Bed bureau, by a General Practitioner or deputy"
            },
            {
                "system": "https://fhir.hl7.org.uk/CodeSystem/UKCore-AdmissionMethodWales",
                "version": "1.0.0",
                "code": "22",
                "display": "Emergency Admission: GP: after a request for immediate admission has been made direct to a hospital provider (i.e. not through a Bed Bureau) by a General Practitioner or deputy"
            },
            {
                "system": "https://fhir.hl7.org.uk/CodeSystem/UKCore-AdmissionMethodEngland",
                "version": "1.0.0",
                "code": "2D",
                "display": "Emergency Admission: Other emergency admission"
            },
            {
                "system": "https://fhir.hl7.org.uk/CodeSystem/UKCore-AdmissionMethodEngland",
                "version": "1.0.0",
                "code": "28",
                "display": "Emergency Admission: Other means, examples are: - admitted from the Emergency Care Department of another provider where they had not been admitted - transfer of an admitted Patient from another Hospital Provider in an emergency - baby born at home as intended"
            },
            {
                "system": "https://fhir.hl7.org.uk/CodeSystem/UKCore-AdmissionMethodWales",
                "version": "1.0.0",
                "code": "28",
                "display": "Emergency Admission: Other means, including admitted from the A & E department of another provider where they had not been admitted"
            },
            {
                "system": "https://fhir.hl7.org.uk/CodeSystem/UKCore-AdmissionMethodEngland",
                "version": "1.0.0",
                "code": "2B",
                "display": "Emergency Admission: Transfer of an admitted Patient from another Hospital Provider in an emergency"
            },
            {
                "system": "https://fhir.hl7.org.uk/CodeSystem/UKCore-AdmissionMethodWales",
                "version": "1.0.0",
                "code": "27",
                "display": "Emergency Admission: Via NHS Direct Services"
            },
            {
                "system": "https://fhir.hl7.org.uk/CodeSystem/UKCore-AdmissionMethodEngland",
                "version": "1.0.0",
                "code": "31",
                "display": "Maternity Admission: Admitted ante partum"
            },
            {
                "system": "https://fhir.hl7.org.uk/CodeSystem/UKCore-AdmissionMethodWales",
                "version": "1.0.0",
                "code": "31",
                "display": "Maternity Admission: Admitted ante-partum"
            },
            {
                "system": "https://fhir.hl7.org.uk/CodeSystem/UKCore-AdmissionMethodEngland",
                "version": "1.0.0",
                "code": "32",
                "display": "Maternity Admission: Admitted post partum"
            },
            {
                "system": "https://fhir.hl7.org.uk/CodeSystem/UKCore-AdmissionMethodWales",
                "version": "1.0.0",
                "code": "32",
                "display": "Maternity Admission: Admitted post-partum"
            },
            {
                "system": "https://fhir.hl7.org.uk/CodeSystem/UKCore-AdmissionMethodEngland",
                "version": "1.0.0",
                "code": "98",
                "display": "Not applicable"
            },
            {
                "system": "https://fhir.hl7.org.uk/CodeSystem/UKCore-AdmissionMethodWales",
                "version": "1.0.0",
                "code": "83",
                "display": "Other Admission: Baby born outside the health care provider (except when born at home as intended. In this case the baby is an emergency admission. e.g. if midwife's decision to admit the baby use Admission Method 28)"
            },
            {
                "system": "https://fhir.hl7.org.uk/CodeSystem/UKCore-AdmissionMethodEngland",
                "version": "1.0.0",
                "code": "83",
                "display": "Other Admission: Baby born outside the Health Care Provider except when born at home as intended"
            },
            {
                "system": "https://fhir.hl7.org.uk/CodeSystem/UKCore-AdmissionMethodEngland",
                "version": "1.0.0",
                "code": "82",
                "display": "Other Admission: The birth of a baby in this Health Care Provider"
            },
            {
                "system": "https://fhir.hl7.org.uk/CodeSystem/UKCore-AdmissionMethodWales",
                "version": "1.0.0",
                "code": "82",
                "display": "Other Admission: The birth of a baby in this health care provider"
            },
            {
                "system": "https://fhir.hl7.org.uk/CodeSystem/UKCore-AdmissionMethodEngland",
                "version": "1.0.0",
                "code": "81",
                "display": "Other Admission: Transfer of any admitted Patient from other Hospital Provider other than in an emergency"
            },
            {
                "system": "https://fhir.hl7.org.uk/CodeSystem/UKCore-AdmissionMethodWales",
                "version": "1.0.0",
                "code": "81",
                "display": "Other Admission: Transfer of any admitted patient from other hospital provider.  May be used for an elective or emergency transfer from other hospital provider."
            }
        ]
    }
}

HTML View

ValueSet 'UKCoreAllergyCode'

A set of codes from the following dm+d (dictionary of medicines and devices) concept classes that define a medication or medication ingredient that the patient has an allergy or intolerance to:

• VTM – Virtual Therapeutic Moiety
• VMP – Virtual Medicinal Product
• AMP – Actual Medicinal Product
• Ingredient

A set of codes from the SNOMED CT UK coding system that:

• identify a substance or pharmaceutical or biologic product that the patient has an allergy or intolerance to
• state that the patient has no known allergy or does not have a specific allergy
• provide a degrade of information about a drug or non-drug allergy

Where no dm+d or SNOMED CT coded information is available, a specific code from the nullFlavor Code System can be used instead to indicate this.

Contact Information

HL7 UK

Email: ukcore@hl7.org.uk

• Include codes from https://dmd.nhs.uk where parent Equal VTM
• Include codes from https://dmd.nhs.uk where parent Equal VMP
• Include codes from https://dmd.nhs.uk where parent Equal AMP
• Include codes from https://dmd.nhs.uk where parent Equal INGREDIENT
• Include codes from SNOMED_CT where constraint Equal descendantOf 105590001 OR descendantOf 373873005 OR descendantOrSelfOf 716186003 OR 196461000000101 OR 196471000000108
• The following codes from system: v3.NullFlavor
  
  

  Code	Display
  NI	NoInformation

Table View

XML View

<ValueSet xmlns="http://hl7.org/fhir">
    <id value="UKCore-AllergyCode" />
    <url value="https://fhir.hl7.org.uk/ValueSet/UKCore-AllergyCode" />
    <version value="2.2.0" />
    <name value="UKCoreAllergyCode" />
    <title value="UK Core Allergy Code" />
    <status value="active" />
    <date value="2022-08-26" />
    <publisher value="HL7 UK" />
    <contact>
        <name value="HL7 UK" />
        <telecom>
            <system value="email" />
            <value value="ukcore@hl7.org.uk" />
            <use value="work" />
            <rank value="1" />
        </telecom>
    </contact>
    <description value="A set of codes from the following dm+d (dictionary of medicines and devices) concept classes that define a medication or medication ingredient that the patient has an allergy or intolerance to: \n - VTM – Virtual Therapeutic Moiety \n - VMP – Virtual Medicinal Product \n - AMP – Actual Medicinal Product \n - Ingredient \n\n A set of codes from the SNOMED CT UK coding system that:   \n - identify a substance or pharmaceutical or biologic product that the patient has an allergy or intolerance to  \n - state that the patient has no known allergy or does not have a specific allergy  \n - provide a degrade of information about a drug or non-drug allergy  \n\n Where no dm+d or SNOMED CT coded information is available, a specific code from the nullFlavor Code System can be used instead to indicate this." />
    <copyright value="Copyright &#169; 2021+ HL7 UK Licensed under the Apache License, Version 2.0 (the &quot;License&quot;); you may not use this file except in compliance with the License. You may obtain a copy of the License at  http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an &quot;AS IS&quot; BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. HL7&#174; FHIR&#174; standard Copyright &#169; 2011+ HL7 The HL7&#174; FHIR&#174; standard is used under the FHIR license. You may obtain a copy of the FHIR license at  https://www.hl7.org/fhir/license.html.&lt;br$gt;This value set includes content from SNOMED CT, which is copyright &#169; 2002+ International Health Terminology Standards Development Organisation (IHTSDO), and distributed by agreement between IHTSDO and HL7. Implementer use of SNOMED CT is not covered by this agreement." />
    <compose>
        <include>
            <system value="https://dmd.nhs.uk" />
            <filter>
                <property value="parent" />
                <op value="=" />
                <value value="VTM" />
            </filter>
        </include>
        <include>
            <system value="https://dmd.nhs.uk" />
            <filter>
                <property value="parent" />
                <op value="=" />
                <value value="VMP" />
            </filter>
        </include>
        <include>
            <system value="https://dmd.nhs.uk" />
            <filter>
                <property value="parent" />
                <op value="=" />
                <value value="AMP" />
            </filter>
        </include>
        <include>
            <system value="https://dmd.nhs.uk" />
            <filter>
                <property value="parent" />
                <op value="=" />
                <value value="INGREDIENT" />
            </filter>
        </include>
        <include>
            <system value="http://snomed.info/sct" />
            <filter>
                <property value="constraint" />
                <op value="=" />
                <value value="descendantOf 105590001 OR descendantOf 373873005 OR descendantOrSelfOf 716186003 OR 196461000000101 OR 196471000000108" />
            </filter>
        </include>
        <include>
            <system value="http://terminology.hl7.org/CodeSystem/v3-NullFlavor" />
            <concept>
                <code value="NI" />
                <display value="NoInformation" />
            </concept>
        </include>
    </compose>
</ValueSet>

JSON View

{
    "resourceType": "ValueSet",
    "id": "UKCore-AllergyCode",
    "url": "https://fhir.hl7.org.uk/ValueSet/UKCore-AllergyCode",
    "version": "2.2.0",
    "name": "UKCoreAllergyCode",
    "title": "UK Core Allergy Code",
    "status": "active",
    "date": "2022-08-26",
    "publisher": "HL7 UK",
    "contact":  [
        {
            "name": "HL7 UK",
            "telecom":  [
                {
                    "system": "email",
                    "value": "ukcore@hl7.org.uk",
                    "use": "work",
                    "rank": 1
                }
            ]
        }
    ],
    "description": "A set of codes from the following dm+d (dictionary of medicines and devices) concept classes that define a medication or medication ingredient that the patient has an allergy or intolerance to: \n - VTM – Virtual Therapeutic Moiety \n - VMP – Virtual Medicinal Product \n - AMP – Actual Medicinal Product \n - Ingredient \n\n A set of codes from the SNOMED CT UK coding system that:   \n - identify a substance or pharmaceutical or biologic product that the patient has an allergy or intolerance to  \n - state that the patient has no known allergy or does not have a specific allergy  \n - provide a degrade of information about a drug or non-drug allergy  \n\n Where no dm+d or SNOMED CT coded information is available, a specific code from the nullFlavor Code System can be used instead to indicate this.",
    "copyright": "Copyright © 2021+ HL7 UK Licensed under the Apache License, Version 2.0 (the \"License\"); you may not use this file except in compliance with the License. You may obtain a copy of the License at  http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an \"AS IS\" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. HL7® FHIR® standard Copyright © 2011+ HL7 The HL7® FHIR® standard is used under the FHIR license. You may obtain a copy of the FHIR license at  https://www.hl7.org/fhir/license.html.<br$gt;This value set includes content from SNOMED CT, which is copyright © 2002+ International Health Terminology Standards Development Organisation (IHTSDO), and distributed by agreement between IHTSDO and HL7. Implementer use of SNOMED CT is not covered by this agreement.",
    "compose": {
        "include":  [
            {
                "system": "https://dmd.nhs.uk",
                "filter":  [
                    {
                        "property": "parent",
                        "op": "=",
                        "value": "VTM"
                    }
                ]
            },
            {
                "system": "https://dmd.nhs.uk",
                "filter":  [
                    {
                        "property": "parent",
                        "op": "=",
                        "value": "VMP"
                    }
                ]
            },
            {
                "system": "https://dmd.nhs.uk",
                "filter":  [
                    {
                        "property": "parent",
                        "op": "=",
                        "value": "AMP"
                    }
                ]
            },
            {
                "system": "https://dmd.nhs.uk",
                "filter":  [
                    {
                        "property": "parent",
                        "op": "=",
                        "value": "INGREDIENT"
                    }
                ]
            },
            {
                "system": "http://snomed.info/sct",
                "filter":  [
                    {
                        "property": "constraint",
                        "op": "=",
                        "value": "descendantOf 105590001 OR descendantOf 373873005 OR descendantOrSelfOf 716186003 OR 196461000000101 OR 196471000000108"
                    }
                ]
            },
            {
                "system": "http://terminology.hl7.org/CodeSystem/v3-NullFlavor",
                "concept":  [
                    {
                        "code": "NI",
                        "display": "NoInformation"
                    }
                ]
            }
        ]
    }
}

HTML View

ValueSet 'UKCoreAllergyManifestation'

A set of codes that describe how a patient's allergy was manifested. Selected from the 'Health issues' simple reference set of the SNOMED CT UK coding system.

Alternatively provides a code indicating a degrade of information about a clinical record entry.

Where no SNOMED CT coded information is available, a specific code from the nullFlavor Code System can be used instead to indicate this.

Contact Information

HL7 UK

Email: ukcore@hl7.org.uk

• Include codes from SNOMED_CT where constraint Equal memberOf 1127581000000103 or 196411000000103
• The following codes from system: v3.NullFlavor
  
  

  Code	Display
  NI	NoInformation

Table View

XML View

<ValueSet xmlns="http://hl7.org/fhir">
    <id value="UKCore-AllergyManifestation" />
    <url value="https://fhir.hl7.org.uk/ValueSet/UKCore-AllergyManifestation" />
    <version value="2.2.0" />
    <name value="UKCoreAllergyManifestation" />
    <title value="UK Core Allergy Manifestation" />
    <status value="active" />
    <date value="2022-08-26" />
    <publisher value="HL7 UK" />
    <contact>
        <name value="HL7 UK" />
        <telecom>
            <system value="email" />
            <value value="ukcore@hl7.org.uk" />
            <use value="work" />
            <rank value="1" />
        </telecom>
    </contact>
    <description value="A set of codes that describe how a patient&#39;s allergy was manifested. Selected from the &#39;Health issues&#39; simple reference set of the SNOMED CT UK coding system.\n\n Alternatively provides a code indicating a degrade of information about a clinical record entry.\n\n Where no SNOMED CT coded information is available, a specific code from the nullFlavor Code System can be used instead to indicate this." />
    <copyright value="Copyright &#169; 2021+ HL7 UK Licensed under the Apache License, Version 2.0 (the &quot;License&quot;); you may not use this file except in compliance with the License. You may obtain a copy of the License at  http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an &quot;AS IS&quot; BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. HL7&#174; FHIR&#174; standard Copyright &#169; 2011+ HL7 The HL7&#174; FHIR&#174; standard is used under the FHIR license. You may obtain a copy of the FHIR license at  https://www.hl7.org/fhir/license.html.&lt;br$gt;This value set includes content from SNOMED CT, which is copyright &#169; 2002+ International Health Terminology Standards Development Organisation (IHTSDO), and distributed by agreement between IHTSDO and HL7. Implementer use of SNOMED CT is not covered by this agreement." />
    <compose>
        <include>
            <system value="http://snomed.info/sct" />
            <filter>
                <property value="constraint" />
                <op value="=" />
                <value value="memberOf 1127581000000103 or 196411000000103" />
            </filter>
        </include>
        <include>
            <system value="http://terminology.hl7.org/CodeSystem/v3-NullFlavor" />
            <concept>
                <code value="NI" />
                <display value="NoInformation" />
            </concept>
        </include>
    </compose>
</ValueSet>

JSON View

{
    "resourceType": "ValueSet",
    "id": "UKCore-AllergyManifestation",
    "url": "https://fhir.hl7.org.uk/ValueSet/UKCore-AllergyManifestation",
    "version": "2.2.0",
    "name": "UKCoreAllergyManifestation",
    "title": "UK Core Allergy Manifestation",
    "status": "active",
    "date": "2022-08-26",
    "publisher": "HL7 UK",
    "contact":  [
        {
            "name": "HL7 UK",
            "telecom":  [
                {
                    "system": "email",
                    "value": "ukcore@hl7.org.uk",
                    "use": "work",
                    "rank": 1
                }
            ]
        }
    ],
    "description": "A set of codes that describe how a patient's allergy was manifested. Selected from the 'Health issues' simple reference set of the SNOMED CT UK coding system.\n\n Alternatively provides a code indicating a degrade of information about a clinical record entry.\n\n Where no SNOMED CT coded information is available, a specific code from the nullFlavor Code System can be used instead to indicate this.",
    "copyright": "Copyright © 2021+ HL7 UK Licensed under the Apache License, Version 2.0 (the \"License\"); you may not use this file except in compliance with the License. You may obtain a copy of the License at  http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an \"AS IS\" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. HL7® FHIR® standard Copyright © 2011+ HL7 The HL7® FHIR® standard is used under the FHIR license. You may obtain a copy of the FHIR license at  https://www.hl7.org/fhir/license.html.<br$gt;This value set includes content from SNOMED CT, which is copyright © 2002+ International Health Terminology Standards Development Organisation (IHTSDO), and distributed by agreement between IHTSDO and HL7. Implementer use of SNOMED CT is not covered by this agreement.",
    "compose": {
        "include":  [
            {
                "system": "http://snomed.info/sct",
                "filter":  [
                    {
                        "property": "constraint",
                        "op": "=",
                        "value": "memberOf 1127581000000103 or 196411000000103"
                    }
                ]
            },
            {
                "system": "http://terminology.hl7.org/CodeSystem/v3-NullFlavor",
                "concept":  [
                    {
                        "code": "NI",
                        "display": "NoInformation"
                    }
                ]
            }
        ]
    }
}

HTML View

ValueSet 'UKCoreAllergySubstance'

A set of codes from the following dm+d (dictionary of medicines and devices) concept classes that define a medication or medication ingredient that the patient has an allergy or intolerance to:

• VTM – Virtual Therapeutic Moiety
• VMP – Virtual Medicinal Product
• AMP – Actual Medicinal Product
• Ingredient

A set of codes from the SNOMED CT UK coding system that:

• identify a substance or pharmaceutical or biologic product that the patient has an allergy or intolerance to
• provide a degrade of information about a drug or non-drug allergy

Where no dm+d or SNOMED CT coded information is available, a specific code from the nullFlavor Code System can be used instead to indicate this.

Contact Information

HL7 UK

Email: ukcore@hl7.org.uk

• Include codes from https://dmd.nhs.uk where parent Equal VTM
• Include codes from https://dmd.nhs.uk where parent Equal VMP
• Include codes from https://dmd.nhs.uk where parent Equal AMP
• Include codes from https://dmd.nhs.uk where parent Equal INGREDIENT
• Include codes from SNOMED_CT where constraint Equal descendantOf 105590001 OR descendantOf 373873005 OR 196461000000101 OR 196471000000108
• The following codes from system: v3.NullFlavor
  
  

  Code	Display
  NI	NoInformation

Table View

XML View

<ValueSet xmlns="http://hl7.org/fhir">
    <id value="UKCore-AllergySubstance" />
    <url value="https://fhir.hl7.org.uk/ValueSet/UKCore-AllergySubstance" />
    <version value="2.2.0" />
    <name value="UKCoreAllergySubstance" />
    <title value="UK Core Allergy Substance" />
    <status value="active" />
    <date value="2022-08-26" />
    <publisher value="HL7 UK" />
    <contact>
        <name value="HL7 UK" />
        <telecom>
            <system value="email" />
            <value value="ukcore@hl7.org.uk" />
            <use value="work" />
            <rank value="1" />
        </telecom>
    </contact>
    <description value="A set of codes from the following dm+d (dictionary of medicines and devices) concept classes that define a medication or medication ingredient that the patient has an allergy or intolerance to:   \n - VTM – Virtual Therapeutic Moiety \n - VMP – Virtual Medicinal Product \n - AMP – Actual Medicinal Product \n - Ingredient \n\n  A set of codes from the SNOMED CT UK coding system that:   \n - identify a substance or pharmaceutical or biologic product that the patient has an allergy or intolerance to  \n - provide a degrade of information about a drug or non-drug allergy  \n\n  Where no dm+d or SNOMED CT coded information is available, a specific code from the nullFlavor Code System can be used instead to indicate this." />
    <copyright value="Copyright &#169; 2021+ HL7 UK Licensed under the Apache License, Version 2.0 (the &quot;License&quot;); you may not use this file except in compliance with the License. You may obtain a copy of the License at  http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an &quot;AS IS&quot; BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. HL7&#174; FHIR&#174; standard Copyright &#169; 2011+ HL7 The HL7&#174; FHIR&#174; standard is used under the FHIR license. You may obtain a copy of the FHIR license at  https://www.hl7.org/fhir/license.html.&lt;br$gt;This value set includes content from SNOMED CT, which is copyright &#169; 2002+ International Health Terminology Standards Development Organisation (IHTSDO), and distributed by agreement between IHTSDO and HL7. Implementer use of SNOMED CT is not covered by this agreement." />
    <compose>
        <include>
            <system value="https://dmd.nhs.uk" />
            <filter>
                <property value="parent" />
                <op value="=" />
                <value value="VTM" />
            </filter>
        </include>
        <include>
            <system value="https://dmd.nhs.uk" />
            <filter>
                <property value="parent" />
                <op value="=" />
                <value value="VMP" />
            </filter>
        </include>
        <include>
            <system value="https://dmd.nhs.uk" />
            <filter>
                <property value="parent" />
                <op value="=" />
                <value value="AMP" />
            </filter>
        </include>
        <include>
            <system value="https://dmd.nhs.uk" />
            <filter>
                <property value="parent" />
                <op value="=" />
                <value value="INGREDIENT" />
            </filter>
        </include>
        <include>
            <system value="http://snomed.info/sct" />
            <filter>
                <property value="constraint" />
                <op value="=" />
                <value value="descendantOf 105590001 OR descendantOf 373873005 OR 196461000000101 OR 196471000000108" />
            </filter>
        </include>
        <include>
            <system value="http://terminology.hl7.org/CodeSystem/v3-NullFlavor" />
            <concept>
                <code value="NI" />
                <display value="NoInformation" />
            </concept>
        </include>
    </compose>
</ValueSet>

JSON View

{
    "resourceType": "ValueSet",
    "id": "UKCore-AllergySubstance",
    "url": "https://fhir.hl7.org.uk/ValueSet/UKCore-AllergySubstance",
    "version": "2.2.0",
    "name": "UKCoreAllergySubstance",
    "title": "UK Core Allergy Substance",
    "status": "active",
    "date": "2022-08-26",
    "publisher": "HL7 UK",
    "contact":  [
        {
            "name": "HL7 UK",
            "telecom":  [
                {
                    "system": "email",
                    "value": "ukcore@hl7.org.uk",
                    "use": "work",
                    "rank": 1
                }
            ]
        }
    ],
    "description": "A set of codes from the following dm+d (dictionary of medicines and devices) concept classes that define a medication or medication ingredient that the patient has an allergy or intolerance to:   \n - VTM – Virtual Therapeutic Moiety \n - VMP – Virtual Medicinal Product \n - AMP – Actual Medicinal Product \n - Ingredient \n\n  A set of codes from the SNOMED CT UK coding system that:   \n - identify a substance or pharmaceutical or biologic product that the patient has an allergy or intolerance to  \n - provide a degrade of information about a drug or non-drug allergy  \n\n  Where no dm+d or SNOMED CT coded information is available, a specific code from the nullFlavor Code System can be used instead to indicate this.",
    "copyright": "Copyright © 2021+ HL7 UK Licensed under the Apache License, Version 2.0 (the \"License\"); you may not use this file except in compliance with the License. You may obtain a copy of the License at  http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an \"AS IS\" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. HL7® FHIR® standard Copyright © 2011+ HL7 The HL7® FHIR® standard is used under the FHIR license. You may obtain a copy of the FHIR license at  https://www.hl7.org/fhir/license.html.<br$gt;This value set includes content from SNOMED CT, which is copyright © 2002+ International Health Terminology Standards Development Organisation (IHTSDO), and distributed by agreement between IHTSDO and HL7. Implementer use of SNOMED CT is not covered by this agreement.",
    "compose": {
        "include":  [
            {
                "system": "https://dmd.nhs.uk",
                "filter":  [
                    {
                        "property": "parent",
                        "op": "=",
                        "value": "VTM"
                    }
                ]
            },
            {
                "system": "https://dmd.nhs.uk",
                "filter":  [
                    {
                        "property": "parent",
                        "op": "=",
                        "value": "VMP"
                    }
                ]
            },
            {
                "system": "https://dmd.nhs.uk",
                "filter":  [
                    {
                        "property": "parent",
                        "op": "=",
                        "value": "AMP"
                    }
                ]
            },
            {
                "system": "https://dmd.nhs.uk",
                "filter":  [
                    {
                        "property": "parent",
                        "op": "=",
                        "value": "INGREDIENT"
                    }
                ]
            },
            {
                "system": "http://snomed.info/sct",
                "filter":  [
                    {
                        "property": "constraint",
                        "op": "=",
                        "value": "descendantOf 105590001 OR descendantOf 373873005 OR 196461000000101 OR 196471000000108"
                    }
                ]
            },
            {
                "system": "http://terminology.hl7.org/CodeSystem/v3-NullFlavor",
                "concept":  [
                    {
                        "code": "NI",
                        "display": "NoInformation"
                    }
                ]
            }
        ]
    }
}