FHIR Genomics Implementation Guide

Notice

Important: This guidance is under active development by NHS England and content may be added or updated on a regular basis.
This Implementation Guide is currently in Draft and SHOULD NOT be used for development or active implementation without express direction from the NHS England Genomics Unit.

Genomics-Bundle

The Genomics Bundle is currently pending Clinical and Technical Assurance of the base UKCore resource. Once this profile becomes active in UKCore its suitability for use and need for profiling within Genomics will be assessed.

The profile for the UKCore-Bundle is provided below for completeness.

Bundles within Genomics will be limited to Transactions for Test orders and updates; Transaction-responses for responses to transactions (housing sets of OperationOutcomes); or Searchsets, returned in response to search queries.

Profile url	FHIR Module	Normative Status
http://hl7.org/fhir/StructureDefinition/Bundle	HL7 International	trial-use

Bundle	I		Resource	Element id Bundle Short description Contains a collection of resources Definition A container for a collection of resources. Data type Resource Constraints bdl-7: FullUrl must be unique in a bundle, or else entries with the same fullUrl must have different meta.versionId (except in history bundles) `(type = 'history') or entry.where(fullUrl.exists()).select(fullUrl&resource.meta.versionId).isDistinct()` bdl-9: A document must have an identifier with a system and a value `type = 'document' implies (identifier.system.exists() and identifier.value.exists())` bdl-3: entry.request mandatory for batch/transaction/history, otherwise prohibited `entry.all(request.exists() = (%resource.type = 'batch' or %resource.type = 'transaction' or %resource.type = 'history'))` bdl-4: entry.response mandatory for batch-response/transaction-response/history, otherwise prohibited `entry.all(response.exists() = (%resource.type = 'batch-response' or %resource.type = 'transaction-response' or %resource.type = 'history'))` bdl-12: A message must have a MessageHeader as the first resource `type = 'message' implies entry.first().resource.is(MessageHeader)` bdl-1: total only when a search or history `total.empty() or (type = 'searchset') or (type = 'history')` bdl-2: entry.search only when a search `entry.search.empty() or (type = 'searchset')` bdl-11: A document must have a Composition as the first resource `type = 'document' implies entry.first().resource.is(Composition)` bdl-10: A document must have a date `type = 'document' implies (timestamp.hasValue())` Mappings rim: Entity. Role, or Act v2: N/A rim: N/A cda: ClinicalDocument, if bundle.type = document
id	Σ	0..1	string	There are no (further) constraints on this element Element id Bundle.id Short description Logical id of this artifact Definition The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes. Comments The only time that a resource does not have an id is when it is being submitted to the server using a create operation. Data type string
meta	Σ	0..1	Meta	There are no (further) constraints on this element Element id Bundle.meta Short description Metadata about the resource Definition The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource. Data type Meta Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: N/A
implicitRules	Σ ?!	0..1	uri	There are no (further) constraints on this element Element id Bundle.implicitRules Short description A set of rules under which this content was created Definition A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc. Comments Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
language		0..1	codeBinding	There are no (further) constraints on this element Element id Bundle.language Short description Language of the resource content Definition The base language in which the resource is written. Comments Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute). Data type code Binding A human language. CommonLanguages (preferred) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
identifier	Σ	0..1	Identifier	Element id Bundle.identifier Short description Persistent identifier for the bundle Definition A persistent identifier for the bundle that won't change as a bundle is copied from server to server. Comments Persistent identity generally only matters for batches of type Document, Message, and Collection. It would not normally be populated for search and history results and servers ignore Bundle.identifier when processing batches and transactions. For Documents the .identifier SHALL be populated such that the .identifier is globally unique. Data type Identifier Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: CX / EI (occasionally, more often EI maps to a resource id or a URL) rim: II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd: Identifier w5: FiveWs.identifier cda: ClinicalDocument.id
type	Σ	1..1	codeBinding	Element id Bundle.type Short description document \| message \| transaction \| transaction-response \| batch \| batch-response \| history \| searchset \| collection Definition Indicates the purpose of this bundle - how it is intended to be used. Comments It's possible to use a bundle for other purposes (e.g. a document can be accepted as a transaction). This is primarily defined so that there can be specific rules for some of the bundle types. Data type code Binding Indicates the purpose of a bundle - how it is intended to be used. BundleType (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a w5: FiveWs.class
timestamp	Σ	0..1	instant	Element id Bundle.timestamp Short description When the bundle was assembled Definition The date/time that the bundle was assembled - i.e. when the resources were placed in the bundle. Comments For many bundles, the timestamp is equal to .meta.lastUpdated, because they are not stored (e.g. search results). When a bundle is placed in a persistent store, .meta.lastUpdated will be usually be changed by the server. When the bundle is a message, a middleware agent altering the message (even if not stored) SHOULD update .meta.lastUpdated. .timestamp is used to track the original time of the Bundle, and SHOULD be populated. Usage: document : the date the document was created. Note: the composition may predate the document, or be associated with multiple documents. The date of the composition - the authoring time - may be earlier than the document assembly time message : the date that the content of the message was assembled. This date is not changed by middleware engines unless they add additional data that changes the meaning of the time of the message history : the date that the history was assembled. This time would be used as the _since time to ask for subsequent updates searchset : the time that the search set was assembled. Note that different pages MAY have different timestamps but need not. Having different timestamps does not imply that subsequent pages will represent or include changes made since the initial query transaction \| transaction-response \| batch \| batch-response \| collection : no particular assigned meaning The timestamp value should be greater than the lastUpdated and other timestamps in the resources in the bundle, and it should be equal or earlier than the .meta.lastUpdated on the Bundle itself. Data type instant Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a w5: FiveWs.init cda: ClinicalDocument.effectiveTime
total	Σ I	0..1	unsignedInt	Element id Bundle.total Short description If search, the total number of matches Definition If a set of search matches, this is the total number of entries of type 'match' across all pages in the search. It does not include search.mode = 'include' or 'outcome' entries and it does not provide a count of the number of entries in the Bundle. Comments Only used if the bundle is a search result set. The total does not include resources such as OperationOutcome and included resources, only the total number of matching resources. Data type unsignedInt Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
link	Σ	0..*	BackboneElement	Element id Bundle.link Short description Links related to this Bundle Definition A series of links that provide context to this bundle. Comments Both Bundle.link and Bundle.entry.link are defined to support providing additional context when Bundles are used (e.g. HATEOAS). Bundle.entry.link corresponds to links found in the HTTP header if the resource in the entry was read directly. This specification defines some specific uses of Bundle.link for searching and paging, but no specific uses for Bundle.entry.link, and no defined function in a transaction - the meaning is implementation specific. Data type BackboneElement Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
id		0..1	string	There are no (further) constraints on this element Element id Bundle.link.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Bundle.link.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id Bundle.link.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
relation	Σ	1..1	string	Element id Bundle.link.relation Short description See http://www.iana.org/assignments/link-relations/link-relations.xhtml#link-relations-1 Definition A name which details the functional use for this link - see http://www.iana.org/assignments/link-relations/link-relations.xhtml#link-relations-1. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
url	Σ	1..1	uri	Element id Bundle.link.url Short description Reference details for the link Definition The reference details for the link. Comments see http://en.wikipedia.org/wiki/Uniform_resource_identifier Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
entry	Σ I	0..*	BackboneElement	Element id Bundle.entry Short description Entry in the bundle - will have a resource or information Definition An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only). Data type BackboneElement Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` bdl-8: fullUrl cannot be a version specific reference `fullUrl.contains('/_history/').not()` bdl-5: must be a resource unless there's a request or response `resource.exists() or request.exists() or response.exists()` Mappings rim: n/a
id		0..1	string	There are no (further) constraints on this element Element id Bundle.entry.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Bundle.entry.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id Bundle.entry.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
link	Σ	0..*	see (link)	There are no (further) constraints on this element Element id Bundle.entry.link Short description Links related to this entry Definition A series of links that provide context to this entry.
fullUrl	Σ	0..1	uri	Element id Bundle.entry.fullUrl Short description URI for resource (Absolute URL server address or URI for UUID/OID) Definition The Absolute URL for the resource. The fullUrl SHALL NOT disagree with the id in the resource - i.e. if the fullUrl is not a urn:uuid, the URL shall be version-independent URL consistent with the Resource.id. The fullUrl is a version independent reference to the resource. The fullUrl element SHALL have a value except that: fullUrl can be empty on a POST (although it does not need to when specifying a temporary id for reference in the bundle) Results from operations might involve resources that are not identified. Comments fullUrl might not be unique in the context of a resource. Note that since FHIR resources do not need to be served through the FHIR API, the fullURL might be a URN or an absolute URL that does not end with the logical id of the resource (Resource.id). However, but if the fullUrl does look like a RESTful server URL (e.g. meets the regex, then the 'id' portion of the fullUrl SHALL end with the Resource.id. Note that the fullUrl is not the same as the canonical URL - it's an absolute url for an endpoint serving the resource (these will happen to have the same value on the canonical server for the resource with the canonical URL). Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
resource	Σ	0..1	Resource	Element id Bundle.entry.resource Short description A resource in the bundle Definition The Resource for the entry. The purpose/meaning of the resource is determined by the Bundle.type. Data type Resource Mappings rim: Entity. Role, or Act
search	Σ I	0..1	BackboneElement	Element id Bundle.entry.search Short description Search related information Definition Information about the search process that lead to the creation of this entry. Data type BackboneElement Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
id		0..1	string	There are no (further) constraints on this element Element id Bundle.entry.search.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Bundle.entry.search.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id Bundle.entry.search.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
mode	Σ	0..1	codeBinding	Element id Bundle.entry.search.mode Short description match \| include \| outcome - why this is in the result set Definition Why this entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process. Comments There is only one mode. In some corner cases, a resource may be included because it is both a match and an include. In these circumstances, 'match' takes precedence. Data type code Binding Why an entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process. SearchEntryMode (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
score	Σ	0..1	decimal	Element id Bundle.entry.search.score Short description Search ranking (between 0 and 1) Definition When searching, the server's search ranking score for the entry. Comments Servers are not required to return a ranking score. 1 is most relevant, and 0 is least relevant. Often, search results are sorted by score, but the client may specify a different sort order. See Patient Match for the EMPI search which relates to this element. Data type decimal Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
request	Σ I	0..1	BackboneElement	Element id Bundle.entry.request Short description Additional execution information (transaction/batch/history) Definition Additional information about how this entry should be processed as part of a transaction or batch. For history, it shows how the entry was processed to create the version contained in the entry. Data type BackboneElement Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
id		0..1	string	There are no (further) constraints on this element Element id Bundle.entry.request.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Bundle.entry.request.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id Bundle.entry.request.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
method	Σ	1..1	codeBinding	Element id Bundle.entry.request.method Short description GET \| HEAD \| POST \| PUT \| DELETE \| PATCH Definition In a transaction or batch, this is the HTTP action to be executed for this entry. In a history bundle, this indicates the HTTP action that occurred. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type code Binding HTTP verbs (in the HTTP command line). See HTTP rfc for details. HTTPVerb (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
url	Σ	1..1	uri	Element id Bundle.entry.request.url Short description URL for HTTP equivalent of this entry Definition The URL for this entry, relative to the root (the address to which the request is posted). Comments E.g. for a Patient Create, the method would be "POST" and the URL would be "Patient". For a Patient Update, the method would be PUT and the URL would be "Patient/[id]". Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
ifNoneMatch	Σ	0..1	string	Element id Bundle.entry.request.ifNoneMatch Short description For managing cache currency Definition If the ETag values match, return a 304 Not Modified status. See the API documentation for "Conditional Read". Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
ifModifiedSince	Σ	0..1	instant	Element id Bundle.entry.request.ifModifiedSince Short description For managing cache currency Definition Only perform the operation if the last updated date matches. See the API documentation for "Conditional Read". Comments Note: This is intended for where precisely observed times are required, typically system logs etc., and not human-reported times - for them, see date and dateTime (which can be as precise as instant, but is not required to be) below. Time zone is always required Data type instant Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
ifMatch	Σ	0..1	string	Element id Bundle.entry.request.ifMatch Short description For managing update contention Definition Only perform the operation if the Etag value matches. For more information, see the API section "Managing Resource Contention". Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
ifNoneExist	Σ	0..1	string	Element id Bundle.entry.request.ifNoneExist Short description For conditional creates Definition Instruct the server not to perform the create if a specified resource already exists. For further information, see the API documentation for "Conditional Create". This is just the query portion of the URL - what follows the "?" (not including the "?"). Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
response	Σ I	0..1	BackboneElement	Element id Bundle.entry.response Short description Results of execution (transaction/batch/history) Definition Indicates the results of processing the corresponding 'request' entry in the batch or transaction being responded to or what the results of an operation where when returning history. Data type BackboneElement Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
id		0..1	string	There are no (further) constraints on this element Element id Bundle.entry.response.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Bundle.entry.response.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id Bundle.entry.response.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
status	Σ	1..1	string	Element id Bundle.entry.response.status Short description Status response code (text optional) Definition The status code returned by processing this entry. The status SHALL start with a 3 digit HTTP code (e.g. 404) and may contain the standard HTTP description associated with the status code. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
location	Σ	0..1	uri	Element id Bundle.entry.response.location Short description The location (if the operation returns a location) Definition The location header created by processing this operation, populated if the operation returns a location. Comments see http://en.wikipedia.org/wiki/Uniform_resource_identifier Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
etag	Σ	0..1	string	Element id Bundle.entry.response.etag Short description The Etag for the resource (if relevant) Definition The Etag for the resource, if the operation for the entry produced a versioned resource (see Resource Metadata and Versioning and Managing Resource Contention). Comments Etags match the Resource.meta.versionId. The ETag has to match the version id in the header if a resource is included. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
lastModified	Σ	0..1	instant	Element id Bundle.entry.response.lastModified Short description Server's date time modified Definition The date/time that the resource was modified on the server. Comments This has to match the same time in the meta header (meta.lastUpdated) if a resource is included. Data type instant Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
outcome	Σ	0..1	Resource	Element id Bundle.entry.response.outcome Short description OperationOutcome with hints and warnings (for batch/transaction) Definition An OperationOutcome containing hints and warnings produced as part of processing this entry in a batch or transaction. Comments For a POST/PUT operation, this is the equivalent outcome that would be returned for prefer = operationoutcome - except that the resource is always returned whether or not the outcome is returned. This outcome is not used for error responses in batch/transaction, only for hints and warnings. In a batch operation, the error will be in Bundle.entry.response, and for transaction, there will be a single OperationOutcome instead of a bundle in the case of an error. Data type Resource Mappings rim: Entity. Role, or Act
signature	Σ	0..1	Signature	Element id Bundle.signature Short description Digital Signature Definition Digital Signature - base64 encoded. XML-DSig or a JWT. Requirements A Signature holds an electronic representation of a signature and its supporting context in a FHIR accessible form. The signature may either be a cryptographic type (XML DigSig or a JWS), which is able to provide non-repudiation proof, or it may be a graphical image that represents a signature or a signature process. This element allows capturing signatures on documents, messages, transactions or even search responses, to support content-authentication, non-repudiation or other business cases. This is primarily relevant where the bundle may travel through multiple hops or via other mechanisms where HTTPS non-repudiation is insufficient. Comments The signature could be created by the "author" of the bundle or by the originating device. Requirements around inclusion of a signature, verification of signatures and treatment of signed/non-signed bundles is implementation-environment specific. Data type Signature Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: N/A

Differential from Bundle

Bundle	I		Resource	Element id Bundle Short description Contains a collection of resources Definition A container for a collection of resources. Data type Resource Constraints bdl-7: FullUrl must be unique in a bundle, or else entries with the same fullUrl must have different meta.versionId (except in history bundles) `(type = 'history') or entry.where(fullUrl.exists()).select(fullUrl&resource.meta.versionId).isDistinct()` bdl-9: A document must have an identifier with a system and a value `type = 'document' implies (identifier.system.exists() and identifier.value.exists())` bdl-3: entry.request mandatory for batch/transaction/history, otherwise prohibited `entry.all(request.exists() = (%resource.type = 'batch' or %resource.type = 'transaction' or %resource.type = 'history'))` bdl-4: entry.response mandatory for batch-response/transaction-response/history, otherwise prohibited `entry.all(response.exists() = (%resource.type = 'batch-response' or %resource.type = 'transaction-response' or %resource.type = 'history'))` bdl-12: A message must have a MessageHeader as the first resource `type = 'message' implies entry.first().resource.is(MessageHeader)` bdl-1: total only when a search or history `total.empty() or (type = 'searchset') or (type = 'history')` bdl-2: entry.search only when a search `entry.search.empty() or (type = 'searchset')` bdl-11: A document must have a Composition as the first resource `type = 'document' implies entry.first().resource.is(Composition)` bdl-10: A document must have a date `type = 'document' implies (timestamp.hasValue())` Mappings rim: Entity. Role, or Act v2: N/A rim: N/A cda: ClinicalDocument, if bundle.type = document
id	Σ	0..1	string	There are no (further) constraints on this element Element id Bundle.id Short description Logical id of this artifact Definition The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes. Comments The only time that a resource does not have an id is when it is being submitted to the server using a create operation. Data type string
meta	Σ	0..1	Meta	There are no (further) constraints on this element Element id Bundle.meta Short description Metadata about the resource Definition The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource. Data type Meta Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: N/A
implicitRules	Σ ?!	0..1	uri	There are no (further) constraints on this element Element id Bundle.implicitRules Short description A set of rules under which this content was created Definition A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc. Comments Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
language		0..1	codeBinding	There are no (further) constraints on this element Element id Bundle.language Short description Language of the resource content Definition The base language in which the resource is written. Comments Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute). Data type code Binding A human language. CommonLanguages (preferred) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
identifier	Σ	0..1	Identifier	Element id Bundle.identifier Short description Persistent identifier for the bundle Definition A persistent identifier for the bundle that won't change as a bundle is copied from server to server. Comments Persistent identity generally only matters for batches of type Document, Message, and Collection. It would not normally be populated for search and history results and servers ignore Bundle.identifier when processing batches and transactions. For Documents the .identifier SHALL be populated such that the .identifier is globally unique. Data type Identifier Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: CX / EI (occasionally, more often EI maps to a resource id or a URL) rim: II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd: Identifier w5: FiveWs.identifier cda: ClinicalDocument.id
type	Σ	1..1	codeBinding	Element id Bundle.type Short description document \| message \| transaction \| transaction-response \| batch \| batch-response \| history \| searchset \| collection Definition Indicates the purpose of this bundle - how it is intended to be used. Comments It's possible to use a bundle for other purposes (e.g. a document can be accepted as a transaction). This is primarily defined so that there can be specific rules for some of the bundle types. Data type code Binding Indicates the purpose of a bundle - how it is intended to be used. BundleType (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a w5: FiveWs.class
timestamp	Σ	0..1	instant	Element id Bundle.timestamp Short description When the bundle was assembled Definition The date/time that the bundle was assembled - i.e. when the resources were placed in the bundle. Comments For many bundles, the timestamp is equal to .meta.lastUpdated, because they are not stored (e.g. search results). When a bundle is placed in a persistent store, .meta.lastUpdated will be usually be changed by the server. When the bundle is a message, a middleware agent altering the message (even if not stored) SHOULD update .meta.lastUpdated. .timestamp is used to track the original time of the Bundle, and SHOULD be populated. Usage: document : the date the document was created. Note: the composition may predate the document, or be associated with multiple documents. The date of the composition - the authoring time - may be earlier than the document assembly time message : the date that the content of the message was assembled. This date is not changed by middleware engines unless they add additional data that changes the meaning of the time of the message history : the date that the history was assembled. This time would be used as the _since time to ask for subsequent updates searchset : the time that the search set was assembled. Note that different pages MAY have different timestamps but need not. Having different timestamps does not imply that subsequent pages will represent or include changes made since the initial query transaction \| transaction-response \| batch \| batch-response \| collection : no particular assigned meaning The timestamp value should be greater than the lastUpdated and other timestamps in the resources in the bundle, and it should be equal or earlier than the .meta.lastUpdated on the Bundle itself. Data type instant Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a w5: FiveWs.init cda: ClinicalDocument.effectiveTime
total	Σ I	0..1	unsignedInt	Element id Bundle.total Short description If search, the total number of matches Definition If a set of search matches, this is the total number of entries of type 'match' across all pages in the search. It does not include search.mode = 'include' or 'outcome' entries and it does not provide a count of the number of entries in the Bundle. Comments Only used if the bundle is a search result set. The total does not include resources such as OperationOutcome and included resources, only the total number of matching resources. Data type unsignedInt Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
link	Σ	0..*	BackboneElement	Element id Bundle.link Short description Links related to this Bundle Definition A series of links that provide context to this bundle. Comments Both Bundle.link and Bundle.entry.link are defined to support providing additional context when Bundles are used (e.g. HATEOAS). Bundle.entry.link corresponds to links found in the HTTP header if the resource in the entry was read directly. This specification defines some specific uses of Bundle.link for searching and paging, but no specific uses for Bundle.entry.link, and no defined function in a transaction - the meaning is implementation specific. Data type BackboneElement Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
id		0..1	string	There are no (further) constraints on this element Element id Bundle.link.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Bundle.link.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id Bundle.link.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
relation	Σ	1..1	string	Element id Bundle.link.relation Short description See http://www.iana.org/assignments/link-relations/link-relations.xhtml#link-relations-1 Definition A name which details the functional use for this link - see http://www.iana.org/assignments/link-relations/link-relations.xhtml#link-relations-1. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
url	Σ	1..1	uri	Element id Bundle.link.url Short description Reference details for the link Definition The reference details for the link. Comments see http://en.wikipedia.org/wiki/Uniform_resource_identifier Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
entry	Σ I	0..*	BackboneElement	Element id Bundle.entry Short description Entry in the bundle - will have a resource or information Definition An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only). Data type BackboneElement Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` bdl-8: fullUrl cannot be a version specific reference `fullUrl.contains('/_history/').not()` bdl-5: must be a resource unless there's a request or response `resource.exists() or request.exists() or response.exists()` Mappings rim: n/a
id		0..1	string	There are no (further) constraints on this element Element id Bundle.entry.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Bundle.entry.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id Bundle.entry.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
link	Σ	0..*	see (link)	There are no (further) constraints on this element Element id Bundle.entry.link Short description Links related to this entry Definition A series of links that provide context to this entry.
fullUrl	Σ	0..1	uri	Element id Bundle.entry.fullUrl Short description URI for resource (Absolute URL server address or URI for UUID/OID) Definition The Absolute URL for the resource. The fullUrl SHALL NOT disagree with the id in the resource - i.e. if the fullUrl is not a urn:uuid, the URL shall be version-independent URL consistent with the Resource.id. The fullUrl is a version independent reference to the resource. The fullUrl element SHALL have a value except that: fullUrl can be empty on a POST (although it does not need to when specifying a temporary id for reference in the bundle) Results from operations might involve resources that are not identified. Comments fullUrl might not be unique in the context of a resource. Note that since FHIR resources do not need to be served through the FHIR API, the fullURL might be a URN or an absolute URL that does not end with the logical id of the resource (Resource.id). However, but if the fullUrl does look like a RESTful server URL (e.g. meets the regex, then the 'id' portion of the fullUrl SHALL end with the Resource.id. Note that the fullUrl is not the same as the canonical URL - it's an absolute url for an endpoint serving the resource (these will happen to have the same value on the canonical server for the resource with the canonical URL). Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
resource	Σ	0..1	Resource	Element id Bundle.entry.resource Short description A resource in the bundle Definition The Resource for the entry. The purpose/meaning of the resource is determined by the Bundle.type. Data type Resource Mappings rim: Entity. Role, or Act
search	Σ I	0..1	BackboneElement	Element id Bundle.entry.search Short description Search related information Definition Information about the search process that lead to the creation of this entry. Data type BackboneElement Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
id		0..1	string	There are no (further) constraints on this element Element id Bundle.entry.search.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Bundle.entry.search.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id Bundle.entry.search.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
mode	Σ	0..1	codeBinding	Element id Bundle.entry.search.mode Short description match \| include \| outcome - why this is in the result set Definition Why this entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process. Comments There is only one mode. In some corner cases, a resource may be included because it is both a match and an include. In these circumstances, 'match' takes precedence. Data type code Binding Why an entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process. SearchEntryMode (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
score	Σ	0..1	decimal	Element id Bundle.entry.search.score Short description Search ranking (between 0 and 1) Definition When searching, the server's search ranking score for the entry. Comments Servers are not required to return a ranking score. 1 is most relevant, and 0 is least relevant. Often, search results are sorted by score, but the client may specify a different sort order. See Patient Match for the EMPI search which relates to this element. Data type decimal Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
request	Σ I	0..1	BackboneElement	Element id Bundle.entry.request Short description Additional execution information (transaction/batch/history) Definition Additional information about how this entry should be processed as part of a transaction or batch. For history, it shows how the entry was processed to create the version contained in the entry. Data type BackboneElement Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
id		0..1	string	There are no (further) constraints on this element Element id Bundle.entry.request.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Bundle.entry.request.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id Bundle.entry.request.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
method	Σ	1..1	codeBinding	Element id Bundle.entry.request.method Short description GET \| HEAD \| POST \| PUT \| DELETE \| PATCH Definition In a transaction or batch, this is the HTTP action to be executed for this entry. In a history bundle, this indicates the HTTP action that occurred. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type code Binding HTTP verbs (in the HTTP command line). See HTTP rfc for details. HTTPVerb (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
url	Σ	1..1	uri	Element id Bundle.entry.request.url Short description URL for HTTP equivalent of this entry Definition The URL for this entry, relative to the root (the address to which the request is posted). Comments E.g. for a Patient Create, the method would be "POST" and the URL would be "Patient". For a Patient Update, the method would be PUT and the URL would be "Patient/[id]". Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
ifNoneMatch	Σ	0..1	string	Element id Bundle.entry.request.ifNoneMatch Short description For managing cache currency Definition If the ETag values match, return a 304 Not Modified status. See the API documentation for "Conditional Read". Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
ifModifiedSince	Σ	0..1	instant	Element id Bundle.entry.request.ifModifiedSince Short description For managing cache currency Definition Only perform the operation if the last updated date matches. See the API documentation for "Conditional Read". Comments Note: This is intended for where precisely observed times are required, typically system logs etc., and not human-reported times - for them, see date and dateTime (which can be as precise as instant, but is not required to be) below. Time zone is always required Data type instant Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
ifMatch	Σ	0..1	string	Element id Bundle.entry.request.ifMatch Short description For managing update contention Definition Only perform the operation if the Etag value matches. For more information, see the API section "Managing Resource Contention". Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
ifNoneExist	Σ	0..1	string	Element id Bundle.entry.request.ifNoneExist Short description For conditional creates Definition Instruct the server not to perform the create if a specified resource already exists. For further information, see the API documentation for "Conditional Create". This is just the query portion of the URL - what follows the "?" (not including the "?"). Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
response	Σ I	0..1	BackboneElement	Element id Bundle.entry.response Short description Results of execution (transaction/batch/history) Definition Indicates the results of processing the corresponding 'request' entry in the batch or transaction being responded to or what the results of an operation where when returning history. Data type BackboneElement Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
id		0..1	string	There are no (further) constraints on this element Element id Bundle.entry.response.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Bundle.entry.response.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id Bundle.entry.response.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
status	Σ	1..1	string	Element id Bundle.entry.response.status Short description Status response code (text optional) Definition The status code returned by processing this entry. The status SHALL start with a 3 digit HTTP code (e.g. 404) and may contain the standard HTTP description associated with the status code. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
location	Σ	0..1	uri	Element id Bundle.entry.response.location Short description The location (if the operation returns a location) Definition The location header created by processing this operation, populated if the operation returns a location. Comments see http://en.wikipedia.org/wiki/Uniform_resource_identifier Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
etag	Σ	0..1	string	Element id Bundle.entry.response.etag Short description The Etag for the resource (if relevant) Definition The Etag for the resource, if the operation for the entry produced a versioned resource (see Resource Metadata and Versioning and Managing Resource Contention). Comments Etags match the Resource.meta.versionId. The ETag has to match the version id in the header if a resource is included. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
lastModified	Σ	0..1	instant	Element id Bundle.entry.response.lastModified Short description Server's date time modified Definition The date/time that the resource was modified on the server. Comments This has to match the same time in the meta header (meta.lastUpdated) if a resource is included. Data type instant Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
outcome	Σ	0..1	Resource	Element id Bundle.entry.response.outcome Short description OperationOutcome with hints and warnings (for batch/transaction) Definition An OperationOutcome containing hints and warnings produced as part of processing this entry in a batch or transaction. Comments For a POST/PUT operation, this is the equivalent outcome that would be returned for prefer = operationoutcome - except that the resource is always returned whether or not the outcome is returned. This outcome is not used for error responses in batch/transaction, only for hints and warnings. In a batch operation, the error will be in Bundle.entry.response, and for transaction, there will be a single OperationOutcome instead of a bundle in the case of an error. Data type Resource Mappings rim: Entity. Role, or Act
signature	Σ	0..1	Signature	Element id Bundle.signature Short description Digital Signature Definition Digital Signature - base64 encoded. XML-DSig or a JWT. Requirements A Signature holds an electronic representation of a signature and its supporting context in a FHIR accessible form. The signature may either be a cryptographic type (XML DigSig or a JWS), which is able to provide non-repudiation proof, or it may be a graphical image that represents a signature or a signature process. This element allows capturing signatures on documents, messages, transactions or even search responses, to support content-authentication, non-repudiation or other business cases. This is primarily relevant where the bundle may travel through multiple hops or via other mechanisms where HTTPS non-repudiation is insufficient. Comments The signature could be created by the "author" of the bundle or by the originating device. Requirements around inclusion of a signature, verification of signatures and treatment of signed/non-signed bundles is implementation-environment specific. Data type Signature Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: N/A

Bundle
Definition	A container for a collection of resources.
Cardinality	0...*
Invariants	bdl-7: FullUrl must be unique in a bundle, or else entries with the same fullUrl must have different meta.versionId (except in history bundles) `(type = 'history') or entry.where(fullUrl.exists()).select(fullUrl&resource.meta.versionId).isDistinct()` bdl-9: A document must have an identifier with a system and a value `type = 'document' implies (identifier.system.exists() and identifier.value.exists())` bdl-3: entry.request mandatory for batch/transaction/history, otherwise prohibited `entry.all(request.exists() = (%resource.type = 'batch' or %resource.type = 'transaction' or %resource.type = 'history'))` bdl-4: entry.response mandatory for batch-response/transaction-response/history, otherwise prohibited `entry.all(response.exists() = (%resource.type = 'batch-response' or %resource.type = 'transaction-response' or %resource.type = 'history'))` bdl-12: A message must have a MessageHeader as the first resource `type = 'message' implies entry.first().resource.is(MessageHeader)` bdl-1: total only when a search or history `total.empty() or (type = 'searchset') or (type = 'history')` bdl-2: entry.search only when a search `entry.search.empty() or (type = 'searchset')` bdl-11: A document must have a Composition as the first resource `type = 'document' implies entry.first().resource.is(Composition)` bdl-10: A document must have a date `type = 'document' implies (timestamp.hasValue())`
Mappings	rim: Entity. Role, or Act v2: N/A rim: N/A cda: ClinicalDocument, if bundle.type = document
Bundle.id
Definition	The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.
Cardinality	0...1
Type	string
Summary	True
Comments	The only time that a resource does not have an id is when it is being submitted to the server using a create operation.
Bundle.meta
Definition	The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.
Cardinality	0...1
Type	Meta
Summary	True
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	rim: n/a rim: N/A
Bundle.implicitRules
Definition	A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.
Cardinality	0...1
Type	uri
Modifier	True
Summary	True
Comments	Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	rim: n/a
Bundle.language
Definition	The base language in which the resource is written.
Cardinality	0...1
Type	code
Binding	A human language. CommonLanguages (preferred)
Comments	Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	rim: n/a
Bundle.identifier
Definition	A persistent identifier for the bundle that won't change as a bundle is copied from server to server.
Cardinality	0...1
Type	Identifier
Summary	True
Comments	Persistent identity generally only matters for batches of type Document, Message, and Collection. It would not normally be populated for search and history results and servers ignore Bundle.identifier when processing batches and transactions. For Documents the .identifier SHALL be populated such that the .identifier is globally unique.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	rim: n/a v2: CX / EI (occasionally, more often EI maps to a resource id or a URL) rim: II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd: Identifier w5: FiveWs.identifier cda: ClinicalDocument.id
Bundle.type
Definition	Indicates the purpose of this bundle - how it is intended to be used.
Cardinality	1...1
Type	code
Binding	Indicates the purpose of a bundle - how it is intended to be used. BundleType (required)
Summary	True
Comments	It's possible to use a bundle for other purposes (e.g. a document can be accepted as a transaction). This is primarily defined so that there can be specific rules for some of the bundle types.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	rim: n/a w5: FiveWs.class
Bundle.timestamp
Definition	The date/time that the bundle was assembled - i.e. when the resources were placed in the bundle.
Cardinality	0...1
Type	instant
Summary	True
Comments	For many bundles, the timestamp is equal to .meta.lastUpdated, because they are not stored (e.g. search results). When a bundle is placed in a persistent store, .meta.lastUpdated will be usually be changed by the server. When the bundle is a message, a middleware agent altering the message (even if not stored) SHOULD update .meta.lastUpdated. .timestamp is used to track the original time of the Bundle, and SHOULD be populated. Usage: document : the date the document was created. Note: the composition may predate the document, or be associated with multiple documents. The date of the composition - the authoring time - may be earlier than the document assembly time message : the date that the content of the message was assembled. This date is not changed by middleware engines unless they add additional data that changes the meaning of the time of the message history : the date that the history was assembled. This time would be used as the _since time to ask for subsequent updates searchset : the time that the search set was assembled. Note that different pages MAY have different timestamps but need not. Having different timestamps does not imply that subsequent pages will represent or include changes made since the initial query transaction \| transaction-response \| batch \| batch-response \| collection : no particular assigned meaning The timestamp value should be greater than the lastUpdated and other timestamps in the resources in the bundle, and it should be equal or earlier than the .meta.lastUpdated on the Bundle itself.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	rim: n/a w5: FiveWs.init cda: ClinicalDocument.effectiveTime
Bundle.total
Definition	If a set of search matches, this is the total number of entries of type 'match' across all pages in the search. It does not include search.mode = 'include' or 'outcome' entries and it does not provide a count of the number of entries in the Bundle.
Cardinality	0...1
Type	unsignedInt
Summary	True
Comments	Only used if the bundle is a search result set. The total does not include resources such as OperationOutcome and included resources, only the total number of matching resources.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	rim: n/a
Bundle.link
Definition	A series of links that provide context to this bundle.
Cardinality	0...*
Type	BackboneElement
Summary	True
Comments	Both Bundle.link and Bundle.entry.link are defined to support providing additional context when Bundles are used (e.g. HATEOAS). Bundle.entry.link corresponds to links found in the HTTP header if the resource in the entry was read directly. This specification defines some specific uses of Bundle.link for searching and paging, but no specific uses for Bundle.entry.link, and no defined function in a transaction - the meaning is implementation specific.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	rim: n/a
Bundle.link.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Cardinality	0...1
Type	string
Mappings	rim: n/a
Bundle.link.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Cardinality	0...*
Type	Extension
Alias	extensions, user content
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Slicing	Unordered, Open, by url(Value)
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()`
Mappings	rim: n/a rim: N/A
Bundle.link.modifierExtension
Definition	May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).
Cardinality	0...*
Type	Extension
Modifier	True
Summary	True
Alias	extensions, user content, modifiers
Requirements	Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()`
Mappings	rim: n/a rim: N/A
Bundle.link.relation
Definition	A name which details the functional use for this link - see [http://www.iana.org/assignments/link-relations/link-relations.xhtml#link-relations-1](http://www.iana.org/assignments/link-relations/link-relations.xhtml#link-relations-1).
Cardinality	1...1
Type	string
Summary	True
Comments	Note that FHIR strings SHALL NOT exceed 1MB in size
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	rim: n/a
Bundle.link.url
Definition	The reference details for the link.
Cardinality	1...1
Type	uri
Summary	True
Comments	see http://en.wikipedia.org/wiki/Uniform_resource_identifier
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	rim: n/a
Bundle.entry
Definition	An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).
Cardinality	0...*
Type	BackboneElement
Summary	True
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` bdl-8: fullUrl cannot be a version specific reference `fullUrl.contains('/_history/').not()` bdl-5: must be a resource unless there's a request or response `resource.exists() or request.exists() or response.exists()`
Mappings	rim: n/a
Bundle.entry.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Cardinality	0...1
Type	string
Mappings	rim: n/a
Bundle.entry.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Cardinality	0...*
Type	Extension
Alias	extensions, user content
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Slicing	Unordered, Open, by url(Value)
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()`
Mappings	rim: n/a rim: N/A
Bundle.entry.modifierExtension
Definition	May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).
Cardinality	0...*
Type	Extension
Modifier	True
Summary	True
Alias	extensions, user content, modifiers
Requirements	Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()`
Mappings	rim: n/a rim: N/A
Bundle.entry.link
Definition	A series of links that provide context to this entry.
Cardinality	0...*
Type	see (link)
Summary	True
Bundle.entry.fullUrl
Definition	The Absolute URL for the resource. The fullUrl SHALL NOT disagree with the id in the resource - i.e. if the fullUrl is not a urn:uuid, the URL shall be version-independent URL consistent with the Resource.id. The fullUrl is a version independent reference to the resource. The fullUrl element SHALL have a value except that: * fullUrl can be empty on a POST (although it does not need to when specifying a temporary id for reference in the bundle) * Results from operations might involve resources that are not identified.
Cardinality	0...1
Type	uri
Summary	True
Comments	fullUrl might not be unique in the context of a resource. Note that since FHIR resources do not need to be served through the FHIR API, the fullURL might be a URN or an absolute URL that does not end with the logical id of the resource (Resource.id). However, but if the fullUrl does look like a RESTful server URL (e.g. meets the regex, then the 'id' portion of the fullUrl SHALL end with the Resource.id. Note that the fullUrl is not the same as the canonical URL - it's an absolute url for an endpoint serving the resource (these will happen to have the same value on the canonical server for the resource with the canonical URL).
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	rim: n/a
Bundle.entry.resource
Definition	The Resource for the entry. The purpose/meaning of the resource is determined by the Bundle.type.
Cardinality	0...1
Type	Resource
Summary	True
Mappings	rim: Entity. Role, or Act
Bundle.entry.search
Definition	Information about the search process that lead to the creation of this entry.
Cardinality	0...1
Type	BackboneElement
Summary	True
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	rim: n/a
Bundle.entry.search.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Cardinality	0...1
Type	string
Mappings	rim: n/a
Bundle.entry.search.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Cardinality	0...*
Type	Extension
Alias	extensions, user content
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Slicing	Unordered, Open, by url(Value)
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()`
Mappings	rim: n/a rim: N/A
Bundle.entry.search.modifierExtension
Definition	May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).
Cardinality	0...*
Type	Extension
Modifier	True
Summary	True
Alias	extensions, user content, modifiers
Requirements	Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()`
Mappings	rim: n/a rim: N/A
Bundle.entry.search.mode
Definition	Why this entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process.
Cardinality	0...1
Type	code
Binding	Why an entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process. SearchEntryMode (required)
Summary	True
Comments	There is only one mode. In some corner cases, a resource may be included because it is both a match and an include. In these circumstances, 'match' takes precedence.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	rim: n/a
Bundle.entry.search.score
Definition	When searching, the server's search ranking score for the entry.
Cardinality	0...1
Type	decimal
Summary	True
Comments	Servers are not required to return a ranking score. 1 is most relevant, and 0 is least relevant. Often, search results are sorted by score, but the client may specify a different sort order. See Patient Match for the EMPI search which relates to this element.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	rim: n/a
Bundle.entry.request
Definition	Additional information about how this entry should be processed as part of a transaction or batch. For history, it shows how the entry was processed to create the version contained in the entry.
Cardinality	0...1
Type	BackboneElement
Summary	True
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	rim: n/a
Bundle.entry.request.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Cardinality	0...1
Type	string
Mappings	rim: n/a
Bundle.entry.request.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Cardinality	0...*
Type	Extension
Alias	extensions, user content
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Slicing	Unordered, Open, by url(Value)
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()`
Mappings	rim: n/a rim: N/A
Bundle.entry.request.modifierExtension
Definition	May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).
Cardinality	0...*
Type	Extension
Modifier	True
Summary	True
Alias	extensions, user content, modifiers
Requirements	Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()`
Mappings	rim: n/a rim: N/A
Bundle.entry.request.method
Definition	In a transaction or batch, this is the HTTP action to be executed for this entry. In a history bundle, this indicates the HTTP action that occurred.
Cardinality	1...1
Type	code
Binding	HTTP verbs (in the HTTP command line). See HTTP rfc for details. HTTPVerb (required)
Summary	True
Comments	Note that FHIR strings SHALL NOT exceed 1MB in size
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	rim: n/a
Bundle.entry.request.url
Definition	The URL for this entry, relative to the root (the address to which the request is posted).
Cardinality	1...1
Type	uri
Summary	True
Comments	E.g. for a Patient Create, the method would be "POST" and the URL would be "Patient". For a Patient Update, the method would be PUT and the URL would be "Patient/[id]".
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	rim: n/a
Bundle.entry.request.ifNoneMatch
Definition	If the ETag values match, return a 304 Not Modified status. See the API documentation for ["Conditional Read"](http.html#cread).
Cardinality	0...1
Type	string
Summary	True
Comments	Note that FHIR strings SHALL NOT exceed 1MB in size
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	rim: n/a
Bundle.entry.request.ifModifiedSince
Definition	Only perform the operation if the last updated date matches. See the API documentation for ["Conditional Read"](http.html#cread).
Cardinality	0...1
Type	instant
Summary	True
Comments	Note: This is intended for where precisely observed times are required, typically system logs etc., and not human-reported times - for them, see date and dateTime (which can be as precise as instant, but is not required to be) below. Time zone is always required
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	rim: n/a
Bundle.entry.request.ifMatch
Definition	Only perform the operation if the Etag value matches. For more information, see the API section ["Managing Resource Contention"](http.html#concurrency).
Cardinality	0...1
Type	string
Summary	True
Comments	Note that FHIR strings SHALL NOT exceed 1MB in size
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	rim: n/a
Bundle.entry.request.ifNoneExist
Definition	Instruct the server not to perform the create if a specified resource already exists. For further information, see the API documentation for ["Conditional Create"](http.html#ccreate). This is just the query portion of the URL - what follows the "?" (not including the "?").
Cardinality	0...1
Type	string
Summary	True
Comments	Note that FHIR strings SHALL NOT exceed 1MB in size
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	rim: n/a
Bundle.entry.response
Definition	Indicates the results of processing the corresponding 'request' entry in the batch or transaction being responded to or what the results of an operation where when returning history.
Cardinality	0...1
Type	BackboneElement
Summary	True
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	rim: n/a
Bundle.entry.response.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Cardinality	0...1
Type	string
Mappings	rim: n/a
Bundle.entry.response.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Cardinality	0...*
Type	Extension
Alias	extensions, user content
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Slicing	Unordered, Open, by url(Value)
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()`
Mappings	rim: n/a rim: N/A
Bundle.entry.response.modifierExtension
Definition	May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).
Cardinality	0...*
Type	Extension
Modifier	True
Summary	True
Alias	extensions, user content, modifiers
Requirements	Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()`
Mappings	rim: n/a rim: N/A
Bundle.entry.response.status
Definition	The status code returned by processing this entry. The status SHALL start with a 3 digit HTTP code (e.g. 404) and may contain the standard HTTP description associated with the status code.
Cardinality	1...1
Type	string
Summary	True
Comments	Note that FHIR strings SHALL NOT exceed 1MB in size
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	rim: n/a
Bundle.entry.response.location
Definition	The location header created by processing this operation, populated if the operation returns a location.
Cardinality	0...1
Type	uri
Summary	True
Comments	see http://en.wikipedia.org/wiki/Uniform_resource_identifier
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	rim: n/a
Bundle.entry.response.etag
Definition	The Etag for the resource, if the operation for the entry produced a versioned resource (see [Resource Metadata and Versioning](http.html#versioning) and [Managing Resource Contention](http.html#concurrency)).
Cardinality	0...1
Type	string
Summary	True
Comments	Etags match the Resource.meta.versionId. The ETag has to match the version id in the header if a resource is included.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	rim: n/a
Bundle.entry.response.lastModified
Definition	The date/time that the resource was modified on the server.
Cardinality	0...1
Type	instant
Summary	True
Comments	This has to match the same time in the meta header (meta.lastUpdated) if a resource is included.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	rim: n/a
Bundle.entry.response.outcome
Definition	An OperationOutcome containing hints and warnings produced as part of processing this entry in a batch or transaction.
Cardinality	0...1
Type	Resource
Summary	True
Comments	For a POST/PUT operation, this is the equivalent outcome that would be returned for prefer = operationoutcome - except that the resource is always returned whether or not the outcome is returned. This outcome is not used for error responses in batch/transaction, only for hints and warnings. In a batch operation, the error will be in Bundle.entry.response, and for transaction, there will be a single OperationOutcome instead of a bundle in the case of an error.
Mappings	rim: Entity. Role, or Act
Bundle.signature
Definition	Digital Signature - base64 encoded. XML-DSig or a JWT.
Cardinality	0...1
Type	Signature
Summary	True
Requirements	A Signature holds an electronic representation of a signature and its supporting context in a FHIR accessible form. The signature may either be a cryptographic type (XML DigSig or a JWS), which is able to provide non-repudiation proof, or it may be a graphical image that represents a signature or a signature process. This element allows capturing signatures on documents, messages, transactions or even search responses, to support content-authentication, non-repudiation or other business cases. This is primarily relevant where the bundle may travel through multiple hops or via other mechanisms where HTTPS non-repudiation is insufficient.
Comments	The signature could be created by the "author" of the bundle or by the originating device. Requirements around inclusion of a signature, verification of signatures and treatment of signed/non-signed bundles is implementation-environment specific.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	rim: n/a rim: N/A

Bundle-NonWGSTestOrderForm-CancerSolidTumor-Example

Bundle-NonWGSTestOrderForm-Example

Bundle-NonWGSTestOrderForm-FetalScenario-Example

Bundle-NonWGSTestOrderForm-Reanalysis-Example

Bundle-WGSRoD-Example

Bundle-WGSTestOrderForm-Example

Bundle-TransactionResponseError-Example

Bundle-TransactionResponseSuccess-Example

Bundle-Searchset-Example

FHIR	MDS	HL7v2

type

SHALL be present. The type of Bundle. This is expected to be transaction for Bundles POSTed to the central broker, transaction-response for responses to transaction Bundles returned by the broker and searchset for collections of resources returned in response to search (GET) requests, as per standard HTTP FHIR rules.

"type": "transaction",

total

Only relevant for searchset Bundles. Details the number of resources in the bundle matching the search criteria, not including resources included via the _include criteria.

"total": 3,

link

Only relevant for searchset bundles. Details the query string that resulted in the searchset (to allow future queries using the same parameters). "relation": "self" will only ever be used.

Links related to response pagination such as next/prev are pending Non-Functional Requirements finalisation for the order management central broker.

"link": [
        {
            "relation": "self",
            "url": "https://api.service.nhs.uk/genomic-order-management-service/FHIR/R4/Specimen/?_include=Specimen%3Asubject&identifier=RGT03135"
        }
    ],

entry

Transactions

An entry in the bundle. For transaction Bundles, each entry SHOULD contain a fullURL to ensure resources in the Bundle can reference each other, these can be the locations within the source system or urn:uuids.

Resources are expected to contain ids to allow referencing within Bundles, though these will be replaced by server assigned ids when saved by the central broker. If additional identifiers need to be persisted e.g. NHS Number, these should be captured within the identifier field.

Transaction Bundle entries also SHALL contain a request object, specifying the method (either PUT for updates or POST for creates) and the url to send the resource to (equivalent to the resource type for the resource).

Reference to the associated Patient. This MAY be through a resource reference if the ID on the central service is known (or provided within the transaction bundle) or through NHS number where this is known and has been traced through PDS

"entry": [
        {
			"fullUrl": "http://example.org/fhir/Specimen/Specimen-BloodEDTA-Example",
			"resource": {
				"resourceType": "Specimen",
				"id": "Specimen-BloodEDTA-Example",
				"identifier": [
					{
						"system": "https://fhir.add.nhs.uk/Id/specimenId",
						"value": "RGT03135"
					}
				],
				"status": "unavailable",
				"type": {
					"coding": [
						{
							"system": "http://snomed.info/sct",
							"code": "445295009",
							"display": "Blood specimen with EDTA"
						}
					]
				},
				"subject": {
					"reference": "Patient/Patient-MeirLieberman-Example",
					"identifier": {
						"system": "https://fhir.nhs.uk/Id/nhs-number",
						"value": "9449307873"
					}
				},
				"request": [
					{
						"reference": "ServiceRequest/ServiceRequest-NonWGSTestOrderForm-Example"
					}
				]
			},
            "request": {
                "method": "POST",
                "url": "Specimen"
            }
		}
	]

Transaction Responses

These Bundles are returned in response to transaction requests. These will only contain OperationOutcome resources (one for each recource contained in the transaction request). See Acknowledgements and responses for more information.

These entries will contain a response object detailing the response status of the individual resource operation and an OperationOutcome detailing any relevant diagnostics, such as validation messages.

Entries will also contain a location element, detailing the relative path of the resource, where the operation has resulted in a resource being created or updated. These URLs will be version specific (using the _history suffix to denote the version number of the resource) if the resource has been updated.

"entry": [
    {
      "response": {
        "status": "201 Created",
        "location": "ServiceRequest/4d70678c-81e4-4ff4-8c67-17596fd0aa46/",
        "lastModified": "2024-01-30T12:01:24Z",
        "outcome": {
          "resourceType": "OperationOutcome",
          "meta": {
            "lastUpdated": "2024-01-30T12:01:24Z"
          },
          "issue": [
            {
              "severity": "information",
              "code": "informational",
              "diagnostics": "No issues detected during validation."
            }
          ]
        }
      }
    }
  ]

Searchsets

These Bundles are returned in response to GET requests without an ID. entries within these bundles will depend on the endpoint queried and the search parameters included.

Each entry is expected to include a fullUrl identifying the URL that can be used to retrieve the resource on the server; the resource itself; and a search element detailing whether the resource was included in the search response due to it matching the query parameters, "mode": "match", or whether it was included via the _include parameter, "mode": "include".

"entry": [
        {
            "fullUrl": "https://api.service.nhs.uk/genomic-order-management-service/FHIR/R4/44707473",
            "resource": {
                "resourceType": "Specimen",
                "id": "44707473",
                "meta": {
                    "versionId": "1",
                    "lastUpdated": "2024-05-13T14:28:05.843+00:00",
                    "source": "#CJ6XJLTGD315XL2Z"
                },
                "identifier": [
                    {
                        "system": "https://fhir.add.nhs.uk/Id/specimenId",
                        "value": "RGT03135"
                    }
                ],
                "status": "unavailable",
                "type": {
                    "coding": [
                        {
                            "system": "http://snomed.info/sct",
                            "code": "445295009",
                            "display": "Blood specimen with EDTA"
                        }
                    ]
                },
                "subject": {
                    "reference": "Patient/44707475",
                    "identifier": {
                        "system": "https://fhir.nhs.uk/Id/nhs-number",
                        "value": "9449307946"
                    }
                },
                "request": [
                    {
                        "reference": "ServiceRequest/ServiceRequest-NonWGSTestOrderForm-Example"
                    }
                ]
            },
            "search": {
                "mode": "match"
            }
        }
    ]