MedicationRequest

Defines the ID Core constraints and extensions on the MedicationRequest resource for the minimal set of data to query and retrieve prescription information.

Usage

An order or request for both supply of the medication and the instructions for administration of the medication to an individual. This profile covers inpatient medication orders as well as community orders (whether filled by the prescriber or by a pharmacy). It also includes orders for over-the-counter medications (e.g. Aspirin), total parenteral nutrition and diet/ vitamin supplements. It may be used to support the order of medication-related devices. It is not intended for use in prescribing particular diets, or for ordering non-medication-related items (eyeglasses, supplies, etc).

URL

Type URL
Canonical https://fhir.kemkes.go.id/r4/StructureDefinition/MedicationRequest

Structure

Snapshot

idΣ0..1string
metaΣ0..1Meta
implicitRulesΣ ?!0..1uri
language0..1codeBinding
text0..1Narrative
contained0..*Resource
extensionI0..*Extension
modifierExtension?! I0..*Extension
identifier0..*Identifier
statusΣ ?!1..1codeBinding
statusReason0..1CodeableConcept
intentΣ ?!1..1codeBinding
category0..*CodeableConcept
priorityΣ0..1codeBinding
doNotPerformΣ ?!0..1boolean
reportedBooleanboolean
reportedReferenceReference(Patient | Practitioner | PractitionerRole | RelatedPerson | Organization)
medicationCodeableConceptCodeableConcept
medicationReferenceReference(Medication)
subjectΣ I1..1Reference(Patient | https://fhir.kemkes.go.id/r4/StructureDefinition/Group)
encounterI0..1Reference(Encounter)
supportingInformationI0..*Reference(Resource)
authoredOnΣ0..1dateTime
requesterΣ I0..1Reference(Practitioner | PractitionerRole | Organization | Patient | RelatedPerson | https://fhir.kemkes.go.id/r4/StructureDefinition/Device)
performerI0..1Reference(Practitioner | PractitionerRole | Organization | Patient | https://fhir.kemkes.go.id/r4/StructureDefinition/Device | RelatedPerson | https://fhir.kemkes.go.id/r4/StructureDefinition/CareTeam)
performerTypeΣ0..1CodeableConcept
recorderI0..1Reference(Practitioner | PractitionerRole)
reasonCode0..*CodeableConcept
reasonReferenceI0..*Reference(Condition | Observation)
instantiatesCanonicalΣ0..*canonical()
instantiatesUriΣ0..*uri
basedOnΣ I0..*Reference(CarePlan | MedicationRequest | ServiceRequest | https://fhir.kemkes.go.id/r4/StructureDefinition/ImmunizationRecommendation)
groupIdentifierΣ0..1Identifier
courseOfTherapyType0..1CodeableConcept
insuranceI0..*Reference(Coverage | ClaimResponse)
note0..*Annotation
dosageInstruction0..*Dosage
id0..1string
extensionI0..*Extension
modifierExtensionΣ ?! I0..*Extension
id0..1string
extensionI0..*Extension
modifierExtensionΣ ?! I0..*Extension
quantityI0..1https://fhir.kemkes.go.id/r4/StructureDefinition/SimpleQuantity
durationI0..1Duration
dispenseIntervalI0..1Duration
validityPeriodI0..1Period
numberOfRepeatsAllowed0..1unsignedInt
quantityI0..1https://fhir.kemkes.go.id/r4/StructureDefinition/SimpleQuantity
expectedSupplyDurationI0..1Duration
performerI0..1Reference(Organization)
id0..1string
extensionI0..*Extension
modifierExtensionΣ ?! I0..*Extension
allowedBooleanboolean
allowedCodeableConceptCodeableConcept
reason0..1CodeableConcept
priorPrescriptionI0..1Reference(MedicationRequest)
detectedIssueI0..*Reference(https://fhir.kemkes.go.id/r4/StructureDefinition/DetectedIssue)
eventHistoryI0..*Reference(https://fhir.kemkes.go.id/r4/StructureDefinition/Provenance)

Examples

Dictionary

MedicationRequest
DefinitionAn order or request for both supply of the medication and the instructions for administration of the medication to a patient. The resource is called "MedicationRequest" rather than "MedicationPrescription" or "MedicationOrder" to generalize the use across inpatient and outpatient settings, including care plans, etc., and to harmonize with workflow patterns.
Cardinality0...*
AliasPrescription, Order
Invariants
  • dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources
    contained.contained.empty()
  • dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated
    contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()
  • dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource
    contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty()
  • dom-6: A resource should have narrative for robust management
    text.`div`.exists()
  • dom-5: If a resource is contained in another resource, it SHALL NOT have a security label
    contained.meta.security.empty()
Mappings
  • rim: Entity. Role, or Act
  • workflow: Request
  • script10.6: Message/Body/NewRx
  • rim: CombinedMedicationRequest
MedicationRequest.id
DefinitionThe logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.
Cardinality0...1
Typestring
SummaryTrue
Comments

The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

MedicationRequest.meta
DefinitionThe metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.
Cardinality0...1
TypeMeta
SummaryTrue
Invariants
  • ele-1: All FHIR elements must have a @value or children
    hasValue() or (children().count() > id.count())
Mappings
  • rim: n/a
  • rim: N/A
MedicationRequest.implicitRules
DefinitionA reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.
Cardinality0...1
Typeuri
ModifierTrue
SummaryTrue
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

Invariants
  • ele-1: All FHIR elements must have a @value or children
    hasValue() or (children().count() > id.count())
Mappings
  • rim: n/a
MedicationRequest.language
DefinitionThe base language in which the resource is written.
Cardinality0...1
Typecode
Binding

A human language.

CommonLanguages (preferred)
Comments

Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

Invariants
  • ele-1: All FHIR elements must have a @value or children
    hasValue() or (children().count() > id.count())
Mappings
  • rim: n/a
MedicationRequest.text
DefinitionA human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.
Cardinality0...1
TypeNarrative
Aliasnarrative, html, xhtml, display
Comments

Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

Invariants
  • ele-1: All FHIR elements must have a @value or children
    hasValue() or (children().count() > id.count())
Mappings
  • rim: n/a
  • rim: N/A
  • rim: Act.text?
MedicationRequest.contained
DefinitionThese resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.
Cardinality0...*
TypeResource
Aliasinline resources, anonymous resources, contained resources
Comments

This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

Mappings
  • rim: Entity. Role, or Act
  • rim: N/A
MedicationRequest.extension
DefinitionMay be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Cardinality0...*
TypeExtension
Aliasextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

SlicingUnordered, Open, by url(Value)
Invariants
  • ele-1: All FHIR elements must have a @value or children
    hasValue() or (children().count() > id.count())
  • ext-1: Must have either extensions or value[x], not both
    extension.exists() != value.exists()
Mappings
  • rim: n/a
  • rim: N/A
MedicationRequest.modifierExtension
DefinitionMay be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).
Cardinality0...*
TypeExtension
ModifierTrue
Aliasextensions, user content
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

SlicingUnordered, Open, by url(Value)
Invariants
  • ele-1: All FHIR elements must have a @value or children
    hasValue() or (children().count() > id.count())
  • ext-1: Must have either extensions or value[x], not both
    extension.exists() != value.exists()
Mappings
  • rim: n/a
  • rim: N/A
MedicationRequest.identifier
DefinitionIdentifiers associated with this medication request that are defined by business processes and/or used to refer to it when a direct URL reference to the resource itself is not appropriate. They are business identifiers assigned to this resource by the performer or other systems and remain constant as the resource is updated and propagates from server to server.
Cardinality0...*
TypeIdentifier
Comments

This is a business identifier, not a resource identifier.

Invariants
  • ele-1: All FHIR elements must have a @value or children
    hasValue() or (children().count() > id.count())
Mappings
  • rim: n/a
  • v2: CX / EI (occasionally, more often EI maps to a resource id or a URL)
  • rim: II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT]
  • servd: Identifier
  • workflow: Request.identifier
  • script10.6: Message/Header/PrescriberOrderNumber
  • w5: FiveWs.identifier
  • v2: ORC-2-Placer Order Number / ORC-3-Filler Order Number
  • rim: .id
MedicationRequest.status
DefinitionA code specifying the current state of the order. Generally, this will be active or completed state.
Cardinality1...1
Typecode
Binding

A coded concept specifying the state of the prescribing event. Describes the lifecycle of the prescription.

medicationrequest Status (required)
ModifierTrue
SummaryTrue
Comments

This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid.

Invariants
  • ele-1: All FHIR elements must have a @value or children
    hasValue() or (children().count() > id.count())
Mappings
  • rim: n/a
  • workflow: Request.status
  • script10.6: no mapping
  • w5: FiveWs.status
  • rim: .statusCode
MedicationRequest.statusReason
DefinitionCaptures the reason for the current state of the MedicationRequest.
Cardinality0...1
TypeCodeableConcept
Binding

Identifies the reasons for a given status.

medicationRequest Status Reason Codes (example)
Comments

This is generally only used for "exception" statuses such as "suspended" or "cancelled". The reason why the MedicationRequest was created at all is captured in reasonCode, not here.

Invariants
  • ele-1: All FHIR elements must have a @value or children
    hasValue() or (children().count() > id.count())
Mappings
  • rim: n/a
  • v2: CE/CNE/CWE
  • rim: CD
  • orim: fhir:CodeableConcept rdfs:subClassOf dt:CD
  • workflow: Request.statusReason
  • rim: .inboundRelationship[typeCode=SUBJ].source[classCode=CACT, moodCode=EVN].reasonCOde
MedicationRequest.intent
DefinitionWhether the request is a proposal, plan, or an original order.
Cardinality1...1
Typecode
Binding

The kind of medication order.

medicationRequest Intent (required)
ModifierTrue
SummaryTrue
Comments

It is expected that the type of requester will be restricted for different stages of a MedicationRequest. For example, Proposals can be created by a patient, relatedPerson, Practitioner or Device. Plans can be created by Practitioners, Patients, RelatedPersons and Devices. Original orders can be created by a Practitioner only.

An instance-order is an instantiation of a request or order and may be used to populate Medication Administration Record.

This element is labeled as a modifier because the intent alters when and how the resource is actually applicable.

Invariants
  • ele-1: All FHIR elements must have a @value or children
    hasValue() or (children().count() > id.count())
Mappings
  • rim: n/a
  • workflow: Request.intent
  • w5: FiveWs.class
  • rim: .moodCode (nuances beyond PRP/PLAN/RQO would need to be elsewhere)
MedicationRequest.category
DefinitionIndicates the type of medication request (for example, where the medication is expected to be consumed or administered (i.e. inpatient or outpatient)).
Cardinality0...*
TypeCodeableConcept
Binding

A coded concept identifying the category of medication request. For example, where the medication is to be consumed or administered, or the type of medication treatment.

medicationRequest Category Codes (example)
Comments

The category can be used to include where the medication is expected to be consumed or other types of requests.

Invariants
  • ele-1: All FHIR elements must have a @value or children
    hasValue() or (children().count() > id.count())
Mappings
  • rim: n/a
  • v2: CE/CNE/CWE
  • rim: CD
  • orim: fhir:CodeableConcept rdfs:subClassOf dt:CD
  • script10.6: Message/Body/NewRx/MedicationPrescribed/Directions or Message/Body/NewRx/MedicationPrescribed/StructuredSIG
  • w5: FiveWs.class
  • rim: .inboundRelationship[typeCode=COMP].source[classCode=OBS, moodCode=EVN, code="type of medication usage"].value
MedicationRequest.priority
DefinitionIndicates how quickly the Medication Request should be addressed with respect to other requests.
Cardinality0...1
Typecode
Binding

Identifies the level of importance to be assigned to actioning the request.

RequestPriority (required)
SummaryTrue
Comments

Note that FHIR strings SHALL NOT exceed 1MB in size

Invariants
  • ele-1: All FHIR elements must have a @value or children
    hasValue() or (children().count() > id.count())
Mappings
  • rim: n/a
  • workflow: Request.priority
  • w5: FiveWs.grade
  • rim: .priorityCode
MedicationRequest.doNotPerform
DefinitionIf true indicates that the provider is asking for the medication request not to occur.
Cardinality0...1
Typeboolean
ModifierTrue
SummaryTrue
Comments

If do not perform is not specified, the request is a positive request e.g. "do perform".

Invariants
  • ele-1: All FHIR elements must have a @value or children
    hasValue() or (children().count() > id.count())
Mappings
  • rim: n/a
  • rim: SubstanceAdministration.actionNegationInd
MedicationRequest.reported[x]
DefinitionIndicates if this record was captured as a secondary 'reported' record rather than as an original primary source-of-truth record. It may also indicate the source of the report.
Cardinality0...1
Typeboolean
SummaryTrue
Invariants
  • ele-1: All FHIR elements must have a @value or children
    hasValue() or (children().count() > id.count())
Mappings
  • rim: n/a
  • rim: .participation[typeCode=INF].role
MedicationRequest.medication[x]
DefinitionIdentifies the medication being requested. This is a link to a resource that represents the medication which may be the details of the medication or simply an attribute carrying a code that identifies the medication from a known list of medications.
Cardinality1...1
TypeCodeableConcept
Binding

A coded concept identifying substance or product that can be ordered.

SNOMEDCTMedicationCodes (example)
SummaryTrue
Comments

If only a code is specified, then it needs to be a code for a specific product. If more information is required, then the use of the Medication resource is recommended. For example, if you require form or lot number or if the medication is compounded or extemporaneously prepared, then you must reference the Medication resource.

Invariants
  • ele-1: All FHIR elements must have a @value or children
    hasValue() or (children().count() > id.count())
Mappings
  • rim: n/a
  • workflow: Request.code
  • script10.6: Message/Body/NewRx/MedicationPrescribed Medication.code.coding.code = Message/Body/NewRx/MedicationPrescribed/DrugCoded/ProductCode Medication.code.coding.system = Message/Body/NewRx/MedicationPrescribed/DrugCoded/ProductCodeQualifier Medication.code.coding.display = Message/Body/NewRx/MedicationPrescribed/DrugDescription
  • w5: FiveWs.what[x]
  • v2: RXE-2-Give Code / RXO-1-Requested Give Code / RXC-2-Component Code
  • rim: consumable.administrableMedication
MedicationRequest.subject
DefinitionA link to a resource representing the person or set of individuals to whom the medication will be given.
Cardinality1...1
TypeReference(Patient | https://fhir.kemkes.go.id/r4/StructureDefinition/Group)
SummaryTrue
Comments

The subject on a medication request is mandatory. For the secondary use case where the actual subject is not provided, there still must be an anonymized subject specified.

Invariants
  • ele-1: All FHIR elements must have a @value or children
    hasValue() or (children().count() > id.count())
  • ref-1: SHALL have a contained resource if a local reference is provided
    reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))
Mappings
  • rim: n/a
  • rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity)
  • workflow: Request.subject
  • script10.6: Message/Body/NewRx/Patient (need detail to link to specific patient … Patient.Identification in SCRIPT)
  • w5: FiveWs.subject[x]
  • v2: PID-3-Patient ID List
  • rim: .participation[typeCode=AUT].role
  • w5: FiveWs.subject
MedicationRequest.encounter
DefinitionThe Encounter during which this [x] was created or to which the creation of this record is tightly associated.
Cardinality0...1
TypeReference(Encounter)
Comments

This will typically be the encounter the event occurred within, but some activities may be initiated prior to or after the official completion of an encounter but still be tied to the context of the encounter." If there is a need to link to episodes of care they will be handled with an extension.

Invariants
  • ele-1: All FHIR elements must have a @value or children
    hasValue() or (children().count() > id.count())
  • ref-1: SHALL have a contained resource if a local reference is provided
    reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))
Mappings
  • rim: n/a
  • rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity)
  • workflow: Request.context
  • script10.6: no mapping
  • w5: FiveWs.context
  • v2: PV1-19-Visit Number
  • rim: .inboundRelationship[typeCode=COMP].source[classCode=ENC, moodCode=EVN, code="type of encounter or episode"]
MedicationRequest.supportingInformation
DefinitionInclude additional information (for example, patient height and weight) that supports the ordering of the medication.
Cardinality0...*
TypeReference(Resource)
Comments

References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.

Invariants
  • ele-1: All FHIR elements must have a @value or children
    hasValue() or (children().count() > id.count())
  • ref-1: SHALL have a contained resource if a local reference is provided
    reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))
Mappings
  • rim: n/a
  • rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity)
  • workflow: Request.supportingInfo
  • w5: FiveWs.context
  • rim: .outboundRelationship[typeCode=PERT].target[A_SupportingClinicalStatement CMET minimal with many different choices of classCodes(ORG, ENC, PROC, SPLY, SBADM, OBS) and each of the act class codes draws from one or more of the following moodCodes (EVN, DEF, INT PRMS, RQO, PRP, APT, ARQ, GOL)]
MedicationRequest.authoredOn
DefinitionThe date (and perhaps time) when the prescription was initially written or authored on.
Cardinality0...1
TypedateTime
SummaryTrue
Invariants
  • ele-1: All FHIR elements must have a @value or children
    hasValue() or (children().count() > id.count())
Mappings
  • rim: n/a
  • workflow: Request.authoredOn
  • script10.6: Message/Body/NewRx/MedicationPrescribed/WrittenDate
  • w5: FiveWs.recorded
  • v2: RXE-32-Original Order Date/Time / ORC-9-Date/Time of Transaction
  • rim: author.time
MedicationRequest.requester
DefinitionThe individual, organization, or device that initiated the request and has responsibility for its activation.
Cardinality0...1
TypeReference(Practitioner | PractitionerRole | Organization | Patient | RelatedPerson | https://fhir.kemkes.go.id/r4/StructureDefinition/Device)
SummaryTrue
Comments

References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.

Invariants
  • ele-1: All FHIR elements must have a @value or children
    hasValue() or (children().count() > id.count())
  • ref-1: SHALL have a contained resource if a local reference is provided
    reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))
Mappings
  • rim: n/a
  • rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity)
  • workflow: Request.requester
  • w5: FiveWs.author
  • rim: .participation[typeCode=AUT].role
MedicationRequest.performer
DefinitionThe specified desired performer of the medication treatment (e.g. the performer of the medication administration).
Cardinality0...1
TypeReference(Practitioner | PractitionerRole | Organization | Patient | https://fhir.kemkes.go.id/r4/StructureDefinition/Device | RelatedPerson | https://fhir.kemkes.go.id/r4/StructureDefinition/CareTeam)
Comments

References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.

Invariants
  • ele-1: All FHIR elements must have a @value or children
    hasValue() or (children().count() > id.count())
  • ref-1: SHALL have a contained resource if a local reference is provided
    reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))
Mappings
  • rim: n/a
  • rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity)
  • workflow: Request.performer
  • w5: FiveWs.actor
  • rim: .participation[typeCode=PRF].role[scoper.determinerCode=INSTANCE]
MedicationRequest.performerType
DefinitionIndicates the type of performer of the administration of the medication.
Cardinality0...1
TypeCodeableConcept
Binding

Identifies the type of individual that is desired to administer the medication.

ProcedurePerformerRoleCodes (example)
SummaryTrue
Comments

If specified without indicating a performer, this indicates that the performer must be of the specified type. If specified with a performer then it indicates the requirements of the performer if the designated performer is not available.

Invariants
  • ele-1: All FHIR elements must have a @value or children
    hasValue() or (children().count() > id.count())
Mappings
  • rim: n/a
  • v2: CE/CNE/CWE
  • rim: CD
  • orim: fhir:CodeableConcept rdfs:subClassOf dt:CD
  • workflow: Request.performerType
  • rim: .participation[typeCode=PRF].role[scoper.determinerCode=KIND].code
MedicationRequest.recorder
DefinitionThe person who entered the order on behalf of another individual for example in the case of a verbal or a telephone order.
Cardinality0...1
TypeReference(Practitioner | PractitionerRole)
Comments

References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.

Invariants
  • ele-1: All FHIR elements must have a @value or children
    hasValue() or (children().count() > id.count())
  • ref-1: SHALL have a contained resource if a local reference is provided
    reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))
Mappings
  • rim: n/a
  • rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity)
  • w5: FiveWs.who
  • rim: .participation[typeCode=TRANS].role[classCode=ASSIGNED].code (HealthcareProviderType)
MedicationRequest.reasonCode
DefinitionThe reason or the indication for ordering or not ordering the medication.
Cardinality0...*
TypeCodeableConcept
Binding

A coded concept indicating why the medication was ordered.

Condition/Problem/DiagnosisCodes (example)
Comments

This could be a diagnosis code. If a full condition record exists or additional detail is needed, use reasonReference.

Invariants
  • ele-1: All FHIR elements must have a @value or children
    hasValue() or (children().count() > id.count())
Mappings
  • rim: n/a
  • v2: CE/CNE/CWE
  • rim: CD
  • orim: fhir:CodeableConcept rdfs:subClassOf dt:CD
  • workflow: Request.reasonCode
  • script10.6: Message/Body/NewRx/MedicationPrescribed/Diagnosis/Primary/Value
  • w5: FiveWs.why[x]
  • v2: ORC-16-Order Control Code Reason /RXE-27-Give Indication/RXO-20-Indication / RXD-21-Indication / RXG-22-Indication / RXA-19-Indication
  • rim: reason.observation.reasonCode
MedicationRequest.reasonReference
DefinitionCondition or observation that supports why the medication was ordered.
Cardinality0...*
TypeReference(Condition | Observation)
Comments

This is a reference to a condition or observation that is the reason for the medication order. If only a code exists, use reasonCode.

Invariants
  • ele-1: All FHIR elements must have a @value or children
    hasValue() or (children().count() > id.count())
  • ref-1: SHALL have a contained resource if a local reference is provided
    reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))
Mappings
  • rim: n/a
  • rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity)
  • workflow: Request.reasonReference
  • script10.6: no mapping
  • w5: FiveWs.why[x]
  • rim: reason.observation[code=ASSERTION].value
MedicationRequest.instantiatesCanonical
DefinitionThe URL pointing to a protocol, guideline, orderset, or other definition that is adhered to in whole or in part by this MedicationRequest.
Cardinality0...*
Typecanonical()
SummaryTrue
Comments

see Canonical References

Invariants
  • ele-1: All FHIR elements must have a @value or children
    hasValue() or (children().count() > id.count())
Mappings
  • rim: n/a
  • workflow: Request.instantiates
  • rim: .outboundRelationship[typeCode=DEFN].target
MedicationRequest.instantiatesUri
DefinitionThe URL pointing to an externally maintained protocol, guideline, orderset or other definition that is adhered to in whole or in part by this MedicationRequest.
Cardinality0...*
Typeuri
SummaryTrue
Comments

see http://en.wikipedia.org/wiki/Uniform_resource_identifier

Invariants
  • ele-1: All FHIR elements must have a @value or children
    hasValue() or (children().count() > id.count())
Mappings
  • rim: n/a
  • rim: .outboundRelationship[typeCode=DEFN].target
MedicationRequest.basedOn
DefinitionA plan or request that is fulfilled in whole or in part by this medication request.
Cardinality0...*
TypeReference(CarePlan | MedicationRequest | ServiceRequest | https://fhir.kemkes.go.id/r4/StructureDefinition/ImmunizationRecommendation)
SummaryTrue
Comments

References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.

Invariants
  • ele-1: All FHIR elements must have a @value or children
    hasValue() or (children().count() > id.count())
  • ref-1: SHALL have a contained resource if a local reference is provided
    reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))
Mappings
  • rim: n/a
  • rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity)
  • workflow: Request.basedOn
  • rim: .outboundRelationship[typeCode=FLFS].target[classCode=SBADM or PROC or PCPR or OBS, moodCode=RQO orPLAN or PRP]
MedicationRequest.groupIdentifier
DefinitionA shared identifier common to all requests that were authorized more or less simultaneously by a single author, representing the identifier of the requisition or prescription.
Cardinality0...1
TypeIdentifier
SummaryTrue
Requirements

Requests are linked either by a "basedOn" relationship (i.e. one request is fulfilling another) or by having a common requisition. Requests that are part of the same requisition are generally treated independently from the perspective of changing their state or maintaining them after initial creation.

Invariants
  • ele-1: All FHIR elements must have a @value or children
    hasValue() or (children().count() > id.count())
Mappings
  • rim: n/a
  • v2: CX / EI (occasionally, more often EI maps to a resource id or a URL)
  • rim: II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT]
  • servd: Identifier
  • workflow: Request.groupIdentifier
  • rim: .outboundRelationship(typeCode=COMP].target[classCode=SBADM, moodCode=INT].id
MedicationRequest.courseOfTherapyType
DefinitionThe description of the overall patte3rn of the administration of the medication to the patient.
Cardinality0...1
TypeCodeableConcept
Binding

Identifies the overall pattern of medication administratio.

medicationRequest Course of Therapy Codes (example)
Comments

This attribute should not be confused with the protocol of the medication.

Invariants
  • ele-1: All FHIR elements must have a @value or children
    hasValue() or (children().count() > id.count())
Mappings
  • rim: n/a
  • v2: CE/CNE/CWE
  • rim: CD
  • orim: fhir:CodeableConcept rdfs:subClassOf dt:CD
  • rim: Act.code where classCode = LIST and moodCode = EVN
MedicationRequest.insurance
DefinitionInsurance plans, coverage extensions, pre-authorizations and/or pre-determinations that may be required for delivering the requested service.
Cardinality0...*
TypeReference(Coverage | ClaimResponse)
Comments

References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.

Invariants
  • ele-1: All FHIR elements must have a @value or children
    hasValue() or (children().count() > id.count())
  • ref-1: SHALL have a contained resource if a local reference is provided
    reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))
Mappings
  • rim: n/a
  • rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity)
  • workflow: Request.insurance
  • rim: .outboundRelationship[typeCode=COVBY].target
MedicationRequest.note
DefinitionExtra information about the prescription that could not be conveyed by the other attributes.
Cardinality0...*
TypeAnnotation
Comments

For systems that do not have structured annotations, they can simply communicate a single annotation with no author or time. This element may need to be included in narrative because of the potential for modifying information. Annotations SHOULD NOT be used to communicate "modifying" information that could be computable. (This is a SHOULD because enforcing user behavior is nearly impossible).

Invariants
  • ele-1: All FHIR elements must have a @value or children
    hasValue() or (children().count() > id.count())
Mappings
  • rim: n/a
  • v2: N/A
  • rim: Act
  • workflow: Request.note
  • script10.6: Message/Body/NewRx/MedicationPrescribed/Note
  • rim: .inboundRelationship[typeCode=SUBJ]/source[classCode=OBS,moodCode=EVN,code="annotation"].value
MedicationRequest.dosageInstruction
DefinitionIndicates how the medication is to be used by the patient.
Cardinality0...*
TypeDosage
Comments

There are examples where a medication request may include the option of an oral dose or an Intravenous or Intramuscular dose. For example, "Ondansetron 8mg orally or IV twice a day as needed for nausea" or "Compazine® (prochlorperazine) 5-10mg PO or 25mg PR bid prn nausea or vomiting". In these cases, two medication requests would be created that could be grouped together. The decision on which dose and route of administration to use is based on the patient's condition at the time the dose is needed.

Invariants
  • ele-1: All FHIR elements must have a @value or children
    hasValue() or (children().count() > id.count())
Mappings
  • rim: n/a
  • rim: .outboundRelationship[typeCode=COMP].target[classCode=SBADM, moodCode=INT]
  • workflow: Request.occurrence[x]
  • rim: see dosageInstruction mapping
MedicationRequest.dispenseRequest
DefinitionIndicates the specific details for the dispense or medication supply part of a medication request (also known as a Medication Prescription or Medication Order). Note that this information is not always sent with the order. There may be in some settings (e.g. hospitals) institutional or system support for completing the dispense details in the pharmacy department.
Cardinality0...1
TypeBackboneElement
Invariants
  • ele-1: All FHIR elements must have a @value or children
    hasValue() or (children().count() > id.count())
Mappings
  • rim: n/a
  • script10.6: Message/Body/NewRx/MedicationPrescribed/ExpirationDate
  • rim: component.supplyEvent
MedicationRequest.dispenseRequest.id
DefinitionUnique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Cardinality0...1
Typestring
Mappings
  • rim: n/a
MedicationRequest.dispenseRequest.extension
DefinitionMay be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Cardinality0...*
TypeExtension
Aliasextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

SlicingUnordered, Open, by url(Value)
Invariants
  • ele-1: All FHIR elements must have a @value or children
    hasValue() or (children().count() > id.count())
  • ext-1: Must have either extensions or value[x], not both
    extension.exists() != value.exists()
Mappings
  • rim: n/a
  • rim: N/A
MedicationRequest.dispenseRequest.modifierExtension
DefinitionMay be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).
Cardinality0...*
TypeExtension
ModifierTrue
SummaryTrue
Aliasextensions, user content, modifiers
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Invariants
  • ele-1: All FHIR elements must have a @value or children
    hasValue() or (children().count() > id.count())
  • ext-1: Must have either extensions or value[x], not both
    extension.exists() != value.exists()
Mappings
  • rim: n/a
  • rim: N/A
MedicationRequest.dispenseRequest.initialFill
DefinitionIndicates the quantity or duration for the first dispense of the medication.
Cardinality0...1
TypeBackboneElement
Comments

If populating this element, either the quantity or the duration must be included.

Invariants
  • ele-1: All FHIR elements must have a @value or children
    hasValue() or (children().count() > id.count())
Mappings
  • rim: n/a
  • rim: SubstanceAdministration -> ActRelationship[sequenceNumber = '1'] -> Supply
MedicationRequest.dispenseRequest.initialFill.id
DefinitionUnique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Cardinality0...1
Typestring
Mappings
  • rim: n/a
MedicationRequest.dispenseRequest.initialFill.extension
DefinitionMay be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Cardinality0...*
TypeExtension
Aliasextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

SlicingUnordered, Open, by url(Value)
Invariants
  • ele-1: All FHIR elements must have a @value or children
    hasValue() or (children().count() > id.count())
  • ext-1: Must have either extensions or value[x], not both
    extension.exists() != value.exists()
Mappings
  • rim: n/a
  • rim: N/A
MedicationRequest.dispenseRequest.initialFill.modifierExtension
DefinitionMay be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).
Cardinality0...*
TypeExtension
ModifierTrue
SummaryTrue
Aliasextensions, user content, modifiers
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Invariants
  • ele-1: All FHIR elements must have a @value or children
    hasValue() or (children().count() > id.count())
  • ext-1: Must have either extensions or value[x], not both
    extension.exists() != value.exists()
Mappings
  • rim: n/a
  • rim: N/A
MedicationRequest.dispenseRequest.initialFill.quantity
DefinitionThe amount or quantity to provide as part of the first dispense.
Cardinality0...1
Typehttps://fhir.kemkes.go.id/r4/StructureDefinition/SimpleQuantity
Comments

The context of use may frequently define what kind of quantity this is and therefore what kind of units can be used. The context of use may also restrict the values for the comparator.

Invariants
  • ele-1: All FHIR elements must have a @value or children
    hasValue() or (children().count() > id.count())
  • qty-3: If a code for the unit is present, the system SHALL also be present
    code.empty() or system.exists()
Mappings
  • rim: n/a
  • v2: SN (see also Range) or CQ
  • rim: PQ, IVL<PQ>, MO, CO, depending on the values
  • rim: Supply.quantity[moodCode=RQO]
MedicationRequest.dispenseRequest.initialFill.duration
DefinitionThe length of time that the first dispense is expected to last.
Cardinality0...1
TypeDuration
Comments

The context of use may frequently define what kind of quantity this is and therefore what kind of units can be used. The context of use may also restrict the values for the comparator.

Invariants
  • ele-1: All FHIR elements must have a @value or children
    hasValue() or (children().count() > id.count())
  • qty-3: If a code for the unit is present, the system SHALL also be present
    code.empty() or system.exists()
  • drt-1: There SHALL be a code if there is a value and it SHALL be an expression of time. If system is present, it SHALL be UCUM.
    code.exists() implies ((system = %ucum) and value.exists())
Mappings
  • rim: n/a
  • v2: SN (see also Range) or CQ
  • rim: PQ, IVL<PQ>, MO, CO, depending on the values
  • rim: PQ, IVL<PQ> depending on the values
  • rim: Supply.effectivetime[moodCode=RQO]
MedicationRequest.dispenseRequest.dispenseInterval
DefinitionThe minimum period of time that must occur between dispenses of the medication.
Cardinality0...1
TypeDuration
Comments

The context of use may frequently define what kind of quantity this is and therefore what kind of units can be used. The context of use may also restrict the values for the comparator.

Invariants
  • ele-1: All FHIR elements must have a @value or children
    hasValue() or (children().count() > id.count())
  • qty-3: If a code for the unit is present, the system SHALL also be present
    code.empty() or system.exists()
  • drt-1: There SHALL be a code if there is a value and it SHALL be an expression of time. If system is present, it SHALL be UCUM.
    code.exists() implies ((system = %ucum) and value.exists())
Mappings
  • rim: n/a
  • v2: SN (see also Range) or CQ
  • rim: PQ, IVL<PQ>, MO, CO, depending on the values
  • rim: PQ, IVL<PQ> depending on the values
  • rim: Supply.effectivetime[moodCode=RQO]
MedicationRequest.dispenseRequest.validityPeriod
DefinitionThis indicates the validity period of a prescription (stale dating the Prescription).
Cardinality0...1
TypePeriod
Requirements

Indicates when the Prescription becomes valid, and when it ceases to be a dispensable Prescription.

Comments

It reflects the prescribers' perspective for the validity of the prescription. Dispenses must not be made against the prescription outside of this period. The lower-bound of the Dispensing Window signifies the earliest date that the prescription can be filled for the first time. If an upper-bound is not specified then the Prescription is open-ended or will default to a stale-date based on regulations.

Invariants
  • ele-1: All FHIR elements must have a @value or children
    hasValue() or (children().count() > id.count())
  • per-1: If present, start SHALL have a lower value than end
    start.hasValue().not() or end.hasValue().not() or (start <= end)
Mappings
  • rim: n/a
  • v2: DR
  • rim: IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"]
  • script10.6: Message/Body/NewRx/MedicationPrescribed/Refills
  • rim: effectiveTime
MedicationRequest.dispenseRequest.numberOfRepeatsAllowed
DefinitionAn integer indicating the number of times, in addition to the original dispense, (aka refills or repeats) that the patient can receive the prescribed medication. Usage Notes: This integer does not include the original order dispense. This means that if an order indicates dispense 30 tablets plus "3 repeats", then the order can be dispensed a total of 4 times and the patient can receive a total of 120 tablets. A prescriber may explicitly say that zero refills are permitted after the initial dispense.
Cardinality0...1
TypeunsignedInt
Comments

If displaying "number of authorized fills", add 1 to this number.

Invariants
  • ele-1: All FHIR elements must have a @value or children
    hasValue() or (children().count() > id.count())
Mappings
  • rim: n/a
  • script10.6: Message/Body/NewRx/MedicationPrescribed/Quantity
  • v2: RXE-12-Number of Refills
  • rim: repeatNumber
MedicationRequest.dispenseRequest.quantity
DefinitionThe amount that is to be dispensed for one fill.
Cardinality0...1
Typehttps://fhir.kemkes.go.id/r4/StructureDefinition/SimpleQuantity
Comments

The context of use may frequently define what kind of quantity this is and therefore what kind of units can be used. The context of use may also restrict the values for the comparator.

Invariants
  • ele-1: All FHIR elements must have a @value or children
    hasValue() or (children().count() > id.count())
  • qty-3: If a code for the unit is present, the system SHALL also be present
    code.empty() or system.exists()
Mappings
  • rim: n/a
  • v2: SN (see also Range) or CQ
  • rim: PQ, IVL<PQ>, MO, CO, depending on the values
  • script10.6: Message/Body/NewRx/MedicationPrescribed/DaysSupply
  • v2: RXD-4-Actual Dispense Amount / RXD-5.1-Actual Dispense Units.code / RXD-5.3-Actual Dispense Units.name of coding system
  • rim: quantity
MedicationRequest.dispenseRequest.expectedSupplyDuration
DefinitionIdentifies the period time over which the supplied product is expected to be used, or the length of time the dispense is expected to last.
Cardinality0...1
TypeDuration
Comments

In some situations, this attribute may be used instead of quantity to identify the amount supplied by how long it is expected to last, rather than the physical quantity issued, e.g. 90 days supply of medication (based on an ordered dosage). When possible, it is always better to specify quantity, as this tends to be more precise. expectedSupplyDuration will always be an estimate that can be influenced by external factors.

Invariants
  • ele-1: All FHIR elements must have a @value or children
    hasValue() or (children().count() > id.count())
  • qty-3: If a code for the unit is present, the system SHALL also be present
    code.empty() or system.exists()
  • drt-1: There SHALL be a code if there is a value and it SHALL be an expression of time. If system is present, it SHALL be UCUM.
    code.exists() implies ((system = %ucum) and value.exists())
Mappings
  • rim: n/a
  • v2: SN (see also Range) or CQ
  • rim: PQ, IVL<PQ>, MO, CO, depending on the values
  • rim: PQ, IVL<PQ> depending on the values
  • script10.6: Message/Body/NewRx/MedicationPrescribed/Substitutions
  • rim: expectedUseTime
MedicationRequest.dispenseRequest.performer
DefinitionIndicates the intended dispensing Organization specified by the prescriber.
Cardinality0...1
TypeReference(Organization)
Comments

References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.

Invariants
  • ele-1: All FHIR elements must have a @value or children
    hasValue() or (children().count() > id.count())
  • ref-1: SHALL have a contained resource if a local reference is provided
    reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))
Mappings
  • rim: n/a
  • rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity)
  • w5: FiveWs.who
  • rim: .outboundRelationship[typeCode=COMP].target[classCode=SPLY, moodCode=RQO] .participation[typeCode=PRF].role[scoper.determinerCode=INSTANCE]
MedicationRequest.substitution
DefinitionIndicates whether or not substitution can or should be part of the dispense. In some cases, substitution must happen, in other cases substitution must not happen. This block explains the prescriber's intent. If nothing is specified substitution may be done.
Cardinality0...1
TypeBackboneElement
Invariants
  • ele-1: All FHIR elements must have a @value or children
    hasValue() or (children().count() > id.count())
Mappings
  • rim: n/a
  • script10.6: specific values within Message/Body/NewRx/MedicationPrescribed/Substitutions
  • rim: subjectOf.substitutionPersmission
MedicationRequest.substitution.id
DefinitionUnique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Cardinality0...1
Typestring
Mappings
  • rim: n/a
MedicationRequest.substitution.extension
DefinitionMay be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Cardinality0...*
TypeExtension
Aliasextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

SlicingUnordered, Open, by url(Value)
Invariants
  • ele-1: All FHIR elements must have a @value or children
    hasValue() or (children().count() > id.count())
  • ext-1: Must have either extensions or value[x], not both
    extension.exists() != value.exists()
Mappings
  • rim: n/a
  • rim: N/A
MedicationRequest.substitution.modifierExtension
DefinitionMay be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).
Cardinality0...*
TypeExtension
ModifierTrue
SummaryTrue
Aliasextensions, user content, modifiers
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Invariants
  • ele-1: All FHIR elements must have a @value or children
    hasValue() or (children().count() > id.count())
  • ext-1: Must have either extensions or value[x], not both
    extension.exists() != value.exists()
Mappings
  • rim: n/a
  • rim: N/A
MedicationRequest.substitution.allowed[x]
DefinitionTrue if the prescriber allows a different drug to be dispensed from what was prescribed.
Cardinality1...1
Typeboolean
Binding

Identifies the type of substitution allowed.

v3.ActSubstanceAdminSubstitutionCode (example)
Comments

This element is labeled as a modifier because whether substitution is allow or not, it cannot be ignored.

Invariants
  • ele-1: All FHIR elements must have a @value or children
    hasValue() or (children().count() > id.count())
Mappings
  • rim: n/a
  • script10.6: specific values within Message/Body/NewRx/MedicationPrescribed/Substitutions
  • v2: RXO-9-Allow Substitutions / RXE-9-Substitution Status
  • rim: code
MedicationRequest.substitution.reason
DefinitionIndicates the reason for the substitution, or why substitution must or must not be performed.
Cardinality0...1
TypeCodeableConcept
Binding

A coded concept describing the reason that a different medication should (or should not) be substituted from what was prescribed.

v3.SubstanceAdminSubstitutionReason (example)
Comments

Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination.

Invariants
  • ele-1: All FHIR elements must have a @value or children
    hasValue() or (children().count() > id.count())
Mappings
  • rim: n/a
  • v2: CE/CNE/CWE
  • rim: CD
  • orim: fhir:CodeableConcept rdfs:subClassOf dt:CD
  • script10.6: not mapped
  • v2: RXE-9 Substition status
  • rim: reasonCode
MedicationRequest.priorPrescription
DefinitionA link to a resource representing an earlier order related order or prescription.
Cardinality0...1
TypeReference(MedicationRequest)
Comments

References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.

Invariants
  • ele-1: All FHIR elements must have a @value or children
    hasValue() or (children().count() > id.count())
  • ref-1: SHALL have a contained resource if a local reference is provided
    reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))
Mappings
  • rim: n/a
  • rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity)
  • workflow: Request.replaces
  • script10.6: not mapped
  • rim: .outboundRelationship[typeCode=?RPLC or ?SUCC]/target[classCode=SBADM,moodCode=RQO]
MedicationRequest.detectedIssue
DefinitionIndicates an actual or potential clinical issue with or between one or more active or proposed clinical actions for a patient; e.g. Drug-drug interaction, duplicate therapy, dosage alert etc.
Cardinality0...*
TypeReference(https://fhir.kemkes.go.id/r4/StructureDefinition/DetectedIssue)
AliasContraindication, Drug Utilization Review (DUR), Alert
Comments

This element can include a detected issue that has been identified either by a decision support system or by a clinician and may include information on the steps that were taken to address the issue.

Invariants
  • ele-1: All FHIR elements must have a @value or children
    hasValue() or (children().count() > id.count())
  • ref-1: SHALL have a contained resource if a local reference is provided
    reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))
Mappings
  • rim: n/a
  • rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity)
  • rim: .inboundRelationship[typeCode=SUBJ]/source[classCode=ALRT,moodCode=EVN].value
MedicationRequest.eventHistory
DefinitionLinks to Provenance records for past versions of this resource or fulfilling request or event resources that identify key state transitions or updates that are likely to be relevant to a user looking at the current version of the resource.
Cardinality0...*
TypeReference(https://fhir.kemkes.go.id/r4/StructureDefinition/Provenance)
Comments

This might not include provenances for all versions of the request – only those deemed “relevant” or important. This SHALL NOT include the provenance associated with this current version of the resource. (If that provenance is deemed to be a “relevant” change, it will need to be added as part of a later update. Until then, it can be queried directly as the provenance that points to this version using _revinclude All Provenances should have some historical version of this Request as their subject.).

Invariants
  • ele-1: All FHIR elements must have a @value or children
    hasValue() or (children().count() > id.count())
  • ref-1: SHALL have a contained resource if a local reference is provided
    reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))
Mappings
  • rim: n/a
  • rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity)
  • workflow: Request.relevantHistory
  • rim: .inboundRelationship(typeCode=SUBJ].source[classCode=CACT, moodCode=EVN]