StructureDefinition-UKCore-Task

• dom-2:If the resource is contained in another resource, it SHALL NOT contain nested Resources
  contained.contained.empty()
• dom-4:If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated
  contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()
• dom-3:If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource
  contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty()
• dom-6:A resource should have narrative for robust management
  text.`div`.exists()
• dom-5:If a resource is contained in another resource, it SHALL NOT have a security label
  contained.meta.security.empty()
• inv-1:Last modified date must be greater than or equal to authored-on date.
  lastModified.exists().not() or authoredOn.exists().not() or lastModified >= authoredOn

• rim:Entity. Role, or Act
• workflow:Request, Event
• rim:ControlAct[moodCode=INT]

The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

• ele-1:All FHIR elements must have a @value or children
  hasValue() or (children().count() > id.count())

• rim:n/a
• rim:N/A

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

• ele-1:All FHIR elements must have a @value or children
  hasValue() or (children().count() > id.count())

• rim:n/a

A human language.

Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

• ele-1:All FHIR elements must have a @value or children
  hasValue() or (children().count() > id.count())

• rim:n/a

Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

• ele-1:All FHIR elements must have a @value or children
  hasValue() or (children().count() > id.count())

• rim:n/a
• rim:N/A
• rim:Act.text?

This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

• rim:Entity. Role, or Act
• rim:N/A

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

• ele-1:All FHIR elements must have a @value or children
  hasValue() or (children().count() > id.count())
• ext-1:Must have either extensions or value[x], not both
  extension.exists() != value.exists()

• rim:n/a
• rim:N/A

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

• ele-1:All FHIR elements must have a @value or children
  hasValue() or (children().count() > id.count())
• ext-1:Must have either extensions or value[x], not both
  extension.exists() != value.exists()

• rim:n/a
• rim:N/A

• ele-1:All FHIR elements must have a @value or children
  hasValue() or (children().count() > id.count())

• rim:n/a
• v2:CX / EI (occasionally, more often EI maps to a resource id or a URL)
• rim:II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT]
• servd:Identifier
• workflow:Request.identifier, Event.identifier
• w5:FiveWs.identifier
• rim:.id

Enables a formal definition of how he task is to be performed, enabling automation.

see Canonical References

• ele-1:All FHIR elements must have a @value or children
  hasValue() or (children().count() > id.count())

• rim:n/a
• workflow:Request.instantiatesCanonical, Event.instantiatesCanonical
• rim:.outboundRelationship[typeCode=DEFN].target

Enables a formal definition of how he task is to be performed (e.g. using BPMN, BPEL, XPDL or other formal notation to be associated with a task), enabling automation.

see http://en.wikipedia.org/wiki/Uniform_resource_identifier

• ele-1:All FHIR elements must have a @value or children
  hasValue() or (children().count() > id.count())

• rim:n/a
• workflow:Event.instantiatesUrl
• rim:.outboundRelationship[typeCode=DEFN].target

References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.

• ele-1:All FHIR elements must have a @value or children
  hasValue() or (children().count() > id.count())
• ref-1:SHALL have a contained resource if a local reference is provided
  reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))

• rim:n/a
• rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity)
• workflow:Request.basedOn, Event.basedOn
• rim:.outboundRelationship[typeCode=FLFS].target[moodCode=INT]

Billing and/or reporting can be linked to whether multiple requests were created as a single unit.

• ele-1:All FHIR elements must have a @value or children
  hasValue() or (children().count() > id.count())

• rim:n/a
• v2:CX / EI (occasionally, more often EI maps to a resource id or a URL)
• rim:II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT]
• servd:Identifier
• workflow:Request.groupIdentifier
• rim:.inboundRelationship[typeCode=COMP].source[moodCode=INT].id

Allows tasks to be broken down into sub-steps (and this division can occur independent of the original task).

This should usually be 0..1.

• ele-1:All FHIR elements must have a @value or children
  hasValue() or (children().count() > id.count())
• ref-1:SHALL have a contained resource if a local reference is provided
  reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))

• rim:n/a
• rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity)
• workflow:Event.partOf
• rim:.inboundRelationship[typeCode=COMP].source[moodCode=INT]

The current status of the task.

These states enable coordination of task status with off-the-shelf workflow solutions that support automation of tasks.

Note that FHIR strings SHALL NOT exceed 1MB in size

• ele-1:All FHIR elements must have a @value or children
  hasValue() or (children().count() > id.count())

• rim:n/a
• workflow:Request.status, Event.status
• w5:FiveWs.status
• rim:.statusCode

Codes to identify the reason for current status. These will typically be specific to a particular workflow.

This applies to the current status. Look at the history of the task to see reasons for past statuses.

• ele-1:All FHIR elements must have a @value or children
  hasValue() or (children().count() > id.count())

• rim:n/a
• v2:CE/CNE/CWE
• rim:CD
• orim:fhir:CodeableConcept rdfs:subClassOf dt:CD
• rim:.inboundRelationship[typeCode=SUBJ].source[classCode=CACT, moodCode=EVN, code="status change"].reasonCode

The domain-specific business-contextual sub-state of the task. For example: "Blood drawn", "IV inserted", "Awaiting physician signature", etc.

There's often a need to track substates of a task - this is often variable by specific workflow implementation.

Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination.

• ele-1:All FHIR elements must have a @value or children
  hasValue() or (children().count() > id.count())

• rim:n/a
• v2:CE/CNE/CWE
• rim:CD
• orim:fhir:CodeableConcept rdfs:subClassOf dt:CD
• rim:.inboundRelationship[typeCode=SUBJ].source[classCode=OBS, moodCode=EVN, code="business status"]

Distinguishes whether the task is a proposal, plan or full order.

This element is immutable. Proposed tasks, planned tasks, etc. must be distinct instances.

In most cases, Tasks will have an intent of "order".

• ele-1:All FHIR elements must have a @value or children
  hasValue() or (children().count() > id.count())

• rim:n/a
• workflow:Request.intent
• w5:FiveWs.class
• rim:.moodCode

The task's priority.

Used to identify the service level expected while performing a task.

Note that FHIR strings SHALL NOT exceed 1MB in size

• ele-1:All FHIR elements must have a @value or children
  hasValue() or (children().count() > id.count())

• rim:n/a
• workflow:Request.priority
• w5:FiveWs.grade
• rim:.priorityCode

Codes to identify what the task involves. These will typically be specific to a particular workflow.

The title (eg "My Tasks", "Outstanding Tasks for Patient X") should go into the code.

• ele-1:All FHIR elements must have a @value or children
  hasValue() or (children().count() > id.count())

• rim:n/a
• v2:CE/CNE/CWE
• rim:CD
• orim:fhir:CodeableConcept rdfs:subClassOf dt:CD
• workflow:Request.code, Event.code
• w5:FiveWs.what[x]
• rim:.code

Note that FHIR strings SHALL NOT exceed 1MB in size

• ele-1:All FHIR elements must have a @value or children
  hasValue() or (children().count() > id.count())

• rim:n/a
• rim:.text

Used to identify the thing to be done.

If multiple resources need to be manipulated, use sub-tasks. (This ensures that status can be tracked independently for each referenced resource.).

• ele-1:All FHIR elements must have a @value or children
  hasValue() or (children().count() > id.count())
• ref-1:SHALL have a contained resource if a local reference is provided
  reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))

• rim:n/a
• rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity)
• w5:FiveWs.what[x]
• rim:.outboundRelationship[typeCode=SUBJ].target

Used to track tasks outstanding for a beneficiary. Do not use to track the task owner or creator (see owner and creator respectively). This can also affect access control.

References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.

• ele-1:All FHIR elements must have a @value or children
  hasValue() or (children().count() > id.count())
• ref-1:SHALL have a contained resource if a local reference is provided
  reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))

• rim:n/a
• rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity)
• workflow:Request.subject, Event.subject
• w5:FiveWs.subject[x]
• rim:.participation[typeCode=RCT].role
• w5:FiveWs.subject

For some tasks it may be important to know the link between the encounter the task originated within.

References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.

• ele-1:All FHIR elements must have a @value or children
  hasValue() or (children().count() > id.count())
• ref-1:SHALL have a contained resource if a local reference is provided
  reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))

• rim:n/a
• rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity)
• workflow:Request.context, Event.context
• w5:FiveWs.context
• rim:.inboundRelationship[typeCode=COMP].source[classCode=PCPR, moodCode=EVN]

A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times").

Period is not used for a duration (a measure of elapsed time). See Duration.

• ele-1:All FHIR elements must have a @value or children
  hasValue() or (children().count() > id.count())
• per-1:If present, start SHALL have a lower value than end
  start.hasValue().not() or end.hasValue().not() or (start <= end)

• rim:n/a
• v2:DR
• rim:IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"]
• workflow:Event.occurrence[x]
• w5:FiveWs.done[x]
• rim:.effectiveTime

Most often used along with lastUpdated to track duration of task to supporting monitoring and management.

• ele-1:All FHIR elements must have a @value or children
  hasValue() or (children().count() > id.count())

• rim:n/a
• workflow:Request.authoredOn
• w5:FiveWs.recorded
• rim:.participation[typeCode=AUT].time

Used along with history to track task activity and time in a particular task state. This enables monitoring and management.

• ele-1:All FHIR elements must have a @value or children
  hasValue() or (children().count() > id.count())

• rim:n/a
• rim:.inboundRelationship[typeCode=SUBJ, ].source[classCode=CACT, moodCode=EVN].effectiveTime

Identifies who created this task. May be used by access control mechanisms (e.g., to ensure that only the creator can cancel a task).

References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.

• ele-1:All FHIR elements must have a @value or children
  hasValue() or (children().count() > id.count())
• ref-1:SHALL have a contained resource if a local reference is provided
  reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))

• rim:n/a
• rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity)
• workflow:Request.requester
• w5:FiveWs.author
• rim:.participation[typeCode=AUT].role

The type(s) of task performers allowed.

Use to distinguish tasks on different activity queues.

Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination.

• ele-1:All FHIR elements must have a @value or children
  hasValue() or (children().count() > id.count())

• rim:n/a
• v2:CE/CNE/CWE
• rim:CD
• orim:fhir:CodeableConcept rdfs:subClassOf dt:CD
• workflow:Event.performer.role, Request.performerType
• w5:FiveWs.actor
• rim:.participation[typeCode=PRF].role.code

Identifies who is expected to perform this task.

Tasks may be created with an owner not yet identified.

• ele-1:All FHIR elements must have a @value or children
  hasValue() or (children().count() > id.count())
• ref-1:SHALL have a contained resource if a local reference is provided
  reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))

• rim:n/a
• rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity)
• workflow:Event.performer.actor, Request.performer
• w5:FiveWs.actor
• rim:.participation[typeCode=PRF].role

Ties the event to where the records are likely kept and provides context around the event occurrence (e.g. if it occurred inside or outside a dedicated healthcare setting).

References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.

• ele-1:All FHIR elements must have a @value or children
  hasValue() or (children().count() > id.count())
• ref-1:SHALL have a contained resource if a local reference is provided
  reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))

• rim:n/a
• rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity)
• workflow:Request.reasonCode, Event.reasonCode
• w5:FiveWs.where[x]
• rim:.participation[typeCode=LOC].role

Indicates why the task is needed. E.g. Suspended because patient admitted to hospital.

This should only be included if there is no focus or if it differs from the reason indicated on the focus.

• ele-1:All FHIR elements must have a @value or children
  hasValue() or (children().count() > id.count())

• rim:n/a
• v2:CE/CNE/CWE
• rim:CD
• orim:fhir:CodeableConcept rdfs:subClassOf dt:CD
• workflow:Event.location
• w5:FiveWs.why[x]
• v2:EVN.7
• rim:.reasonCode

Tasks might be justified based on an Observation, a Condition, a past or planned procedure, etc. This should only be included if there is no focus or if it differs from the reason indicated on the focus. Use the CodeableConcept text element in Task.reasonCode if the data is free (uncoded) text.

• ele-1:All FHIR elements must have a @value or children
  hasValue() or (children().count() > id.count())
• ref-1:SHALL have a contained resource if a local reference is provided
  reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))

• rim:n/a
• rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity)
• workflow:Request.reasonReference, Event.reasonReference
• w5:FiveWs.why[x]
• rim:.outboundRelationship[typeCode=RSON].target

References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.

• ele-1:All FHIR elements must have a @value or children
  hasValue() or (children().count() > id.count())
• ref-1:SHALL have a contained resource if a local reference is provided
  reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))

• rim:n/a
• rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity)
• workflow:Request.insurance
• v2:IN1/IN2
• rim:.outboundRelationship[typeCode=COVBY].target

For systems that do not have structured annotations, they can simply communicate a single annotation with no author or time. This element may need to be included in narrative because of the potential for modifying information. Annotations SHOULD NOT be used to communicate "modifying" information that could be computable. (This is a SHOULD because enforcing user behavior is nearly impossible).

• ele-1:All FHIR elements must have a @value or children
  hasValue() or (children().count() > id.count())

• rim:n/a
• v2:N/A
• rim:Act
• workflow:Request.note, Event.note
• rim:.inboundRelationship[typeCode=SUBJ, ].source[classCode=OBS, moodCode=EVN, code="annotation"].value(string)

This element does not point to the Provenance associated with the current version of the resource - as it would be created after this version existed. The Provenance for the current version can be retrieved with a _revinclude.

• ele-1:All FHIR elements must have a @value or children
  hasValue() or (children().count() > id.count())
• ref-1:SHALL have a contained resource if a local reference is provided
  reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))

• rim:n/a
• rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity)
• workflow:Request.relevantHistory
• rim:.inboundRelationship(typeCode=SUBJ].source[classCode=CACT, moodCode=EVN]

Sometimes when fulfillment is sought, you don't want full fulfillment.

• ele-1:All FHIR elements must have a @value or children
  hasValue() or (children().count() > id.count())

• rim:n/a
• rim:Instead of pointing to request, would point to component of request, having these characteristics

• rim:n/a

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

• ele-1:All FHIR elements must have a @value or children
  hasValue() or (children().count() > id.count())
• ext-1:Must have either extensions or value[x], not both
  extension.exists() != value.exists()

• rim:n/a
• rim:N/A

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

• ele-1:All FHIR elements must have a @value or children
  hasValue() or (children().count() > id.count())
• ext-1:Must have either extensions or value[x], not both
  extension.exists() != value.exists()

• rim:n/a
• rim:N/A

E.g. order that requests monthly lab tests, fulfillment is sought for 1.

32 bit number; for values larger than this, use decimal

• ele-1:All FHIR elements must have a @value or children
  hasValue() or (children().count() > id.count())

• rim:n/a
• rim:.repeatNumber

E.g. order that authorizes 1 year's services. Fulfillment is sought for next 3 months.

Note that period.high is the due date representing the time by which the task should be completed.

• ele-1:All FHIR elements must have a @value or children
  hasValue() or (children().count() > id.count())
• per-1:If present, start SHALL have a lower value than end
  start.hasValue().not() or end.hasValue().not() or (start <= end)

• rim:n/a
• v2:DR
• rim:IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"]
• rim:.effectiveTime(IVL<TS>)

References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.

• ele-1:All FHIR elements must have a @value or children
  hasValue() or (children().count() > id.count())
• ref-1:SHALL have a contained resource if a local reference is provided
  reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))

• rim:n/a
• rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity)
• rim:.participation[typeCode=SBJ].role

Resources and data used to perform the task. This data is used in the business logic of task execution, and is stored separately because it varies between workflows.

• ele-1:All FHIR elements must have a @value or children
  hasValue() or (children().count() > id.count())

• rim:n/a
• rim:???

• rim:n/a

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

• ele-1:All FHIR elements must have a @value or children
  hasValue() or (children().count() > id.count())
• ext-1:Must have either extensions or value[x], not both
  extension.exists() != value.exists()

• rim:n/a
• rim:N/A

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

• ele-1:All FHIR elements must have a @value or children
  hasValue() or (children().count() > id.count())
• ext-1:Must have either extensions or value[x], not both
  extension.exists() != value.exists()

• rim:n/a
• rim:N/A

Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Comparison source", "Applicable consent", "Concomitent Medications", etc.

Inputs are named to enable task automation to bind data and pass it from one task to the next.

If referencing a BPMN workflow or Protocol, the "system" is the URL for the workflow definition and the code is the "name" of the required input.

• ele-1:All FHIR elements must have a @value or children
  hasValue() or (children().count() > id.count())

• rim:n/a
• v2:CE/CNE/CWE
• rim:CD
• orim:fhir:CodeableConcept rdfs:subClassOf dt:CD
• rim:???

• ele-1:All FHIR elements must have a @value or children
  hasValue() or (children().count() > id.count())

• rim:n/a
• rim:???

Resources and data produced during the execution the task. This data is generated by the business logic of task execution, and is stored separately because it varies between workflows.

• ele-1:All FHIR elements must have a @value or children
  hasValue() or (children().count() > id.count())

• rim:n/a
• rim:???

• rim:n/a

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

• ele-1:All FHIR elements must have a @value or children
  hasValue() or (children().count() > id.count())
• ext-1:Must have either extensions or value[x], not both
  extension.exists() != value.exists()

• rim:n/a
• rim:N/A

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

• ele-1:All FHIR elements must have a @value or children
  hasValue() or (children().count() > id.count())
• ext-1:Must have either extensions or value[x], not both
  extension.exists() != value.exists()

• rim:n/a
• rim:N/A

Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Identified issues", "Preliminary results", "Filler order", "Final results", etc.

Outputs are named to enable task automation to bind data and pass it from one task to the next.

Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination.

• ele-1:All FHIR elements must have a @value or children
  hasValue() or (children().count() > id.count())

• rim:n/a
• v2:CE/CNE/CWE
• rim:CD
• orim:fhir:CodeableConcept rdfs:subClassOf dt:CD
• rim:???

Task outputs can take any form.

• ele-1:All FHIR elements must have a @value or children
  hasValue() or (children().count() > id.count())

• rim:n/a
• rim:???