UK Core Implementation Guide 1.0.0 - STU1

Extension Library

This extension library contains all the extensions Clinically and Technically Assured for use with UK Core. The profiles are found in the Profiles Index. The table below lists all the current extensions and the context of use. The context of use column indicates the profile and /or element where the extension may be applied. The type column indicates whether the extension is a modifierExtension or not. The general rule is extensions can be ignored by receivers*. When a modifierExtension is received it SHALL NOT be ignored as it modifies the meaning of the element or elements that contains it. Typically, this means information that qualifies or negates the primary meaning of the element that contains it.

For more information from HL7 about FHIR extensions.

For more information from HL7 about FHIR modifierExtensions.

*There may be specific use cases where this is not the case and the Domain Implementation Guidance associated with the use case SHOULD be consulted.




Extensions Status Context of Use Related Profile Modifier Extension C&TA Sprint
Extension UKCore-AddressKey
active Address Profile UKCore-Patient NO 1
Extension UKCore-AllergyIntoleranceEnd
active AllergyIntolerance Profile UKCore-AllergyIntolerance NO 2
Extension UKCore-BirthSex
active Patient Profile UKCore-Patient NO 1
Extension UKCore-CodingSCTDescDisplay
active Coding All clinical profiles that can use SNOMED CT. See the extension page for information about how this is used in profiles. NO 2
Extension UKCore-ContactPreference
active Patient,
RelatedPerson
Profile UKCore-Patient NO 1
Extension UKCore-ContactRank
active Patient.contact Profile UKCore-Patient NO 1
Extension UKCore-CopyCorrespondenceIndicator
active Patient.contact,
RelatedPerson
Profile UKCore-Patient NO 1
Extension UKCore-DeathNotificationStatus
active Patient Profile UKCore-Patient NO 1
Extension UKCore-EthnicCategory
active Patient Profile UKCore-Patient NO 1
Extension UKCore-Evidence
active AllergyIntolerance Profile UKCore-AllergyIntolerance NO 2
Extension UKCore-MainLocation
active Organization Profile UKCore-Organization NO 1
Extension UKCore-MedicationPrescribingOrganizationType
active MedicationStatement Profile UKCore-MedicationStatement NO 3
Extension UKCore-MedicationRepeatInformation
active MedicationRequest Profile UKCore-MedicationRequest NO 3
Extension UKCore-MedicationStatementLastIssueDate
active MedicationStatement Profile UKCore-MedicationStatement NO 3
Extension UKCore-MedicationTradeFamily
active Medication Profile UKCore-Medication NO 3
Extension UKCore-NHSNumberVerificationStatus
active Patient.identifier Profile UKCore-Patient NO 1
Extension UKCore-OtherContactSystem
active ContactPoint.system Profile UKCore-Patient NO 1
Extension UKCore-ParentPresent
active Immunization Profile UKCore-Immunization NO 3
Extension UKCore-PharmacistVerifiedIndicator
active MedicationStatement Profile UKCore-MedicationStatement NO 3
Extension UKCore-ResidentialStatus
active Patient Profile UKCore-Patient NO 1
Extension UKCore-VaccinationProcedure
active Immunization Profile UKCore-Immunization NO 3

HL7 Common Extensions

The following HL7 extensions have been agreed as suitable to be included for use with the UK Core Profiles Index because the use case for an Extension is fully met by a pre-existing HL7 common Extension. All other HL7 common extensions MAY be used to extend the UK Core if required by the local implementation.

HL7 Common Extension Context of Use Related Profile Modifier Extension
Common Extension coding-sctdescid Coding Use on Element ID Coding NO
Common Extension organization-period Organization Profile UKCore-Organization NO
Common Extension patient-birthPlace Patient Profile UKCore-Patient NO
Common Extension patient-birthTime Patient.birthDate Profile UKCore-Patient NO
Common Extension patient-cadavericDonor Patient Profile UKCore-Patient NO
Common Extension patient-interpreterRequired Patient Profile UKCore-Patient NO

StructureDefinition Extension-UKCoreAddressKey

This carries an address key which will be included in an address.

Purpose

This extension extends the Address datatype to support the exchange of the type of address key and the address key value, which are currently not supported by the FHIR standard.

Context of Use
Use on element Address

Snapshot View

url1..1System.StringFixed Value
valueCodingCoding
url1..1System.StringFixed Value
valueStringstring
url1..1System.StringFixed Value

Differential View

url1..1System.StringFixed Value
valueCodingCoding
url1..1System.StringFixed Value
valueStringstring
url1..1System.StringFixed Value

Hybrid View

url1..1System.StringFixed Value
valueCodingCoding
url1..1System.StringFixed Value
valueStringstring
url1..1System.StringFixed Value

Table View

Extension..
Extension.extension..
Extension.extension1..1
Extension.extension.url..
Extension.extension.value[x]Coding1..
Extension.extension1..1
Extension.extension.url..
Extension.extension.value[x]string1..
Extension.url..
Extension.value[x]..0


XML View

<StructureDefinition xmlns="http://hl7.org/fhir">
    <id value="Extension-UKCore-AddressKey" />
    <url value="https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-AddressKey" />
    <version value="2.1.0" />
    <name value="ExtensionUKCoreAddressKey" />
    <title value="Extension UK Core Address Key" />
    <status value="active" />
    <date value="2021-09-10" />
    <publisher value="HL7 UK" />
    <contact>
        <name value="HL7 UK" />
        <telecom>
            <system value="email" />
            <value value="ukcore@hl7.org.uk" />
            <use value="work" />
            <rank value="1" />
        </telecom>
    </contact>
    <description value="This carries an address identifier which will be included in an address." />
    <purpose value="This extension extends the Address datatype to support the exchange of the type of address identifier and the address identifier value, which are currently not supported by the FHIR standard." />
    <copyright value="Copyright &#169; 2021+ HL7 UK Licensed under the Apache License, Version 2.0 (the &quot;License&quot;); you may not use this file except in compliance with the License. You may obtain a copy of the License at  http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an &quot;AS IS&quot; BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. HL7&#174; FHIR&#174; standard Copyright &#169; 2011+ HL7 The HL7&#174; FHIR&#174; standard is used under the FHIR license. You may obtain a copy of the FHIR license at  https://www.hl7.org/fhir/license.html." />
    <fhirVersion value="4.0.1" />
    <mapping>
        <identity value="rim" />
        <uri value="http://hl7.org/v3" />
        <name value="RIM Mapping" />
    </mapping>
    <kind value="complex-type" />
    <abstract value="false" />
    <context>
        <type value="element" />
        <expression value="Address" />
    </context>
    <type value="Extension" />
    <baseDefinition value="http://hl7.org/fhir/StructureDefinition/Extension" />
    <derivation value="constraint" />
    <differential>
        <element id="Extension">
            <path value="Extension" />
            <short value="An extension carrying the address key and type" />
            <definition value="An extension carrying the address key and type." />
        </element>
        <element id="Extension.extension">
            <path value="Extension.extension" />
            <slicing>
                <discriminator>
                    <type value="value" />
                    <path value="url" />
                </discriminator>
                <rules value="open" />
            </slicing>
        </element>
        <element id="Extension.extension:type">
            <path value="Extension.extension" />
            <sliceName value="type" />
            <short value="Address Key Type" />
            <definition value="To identify the type of Address Key recorded." />
            <min value="1" />
            <max value="1" />
        </element>
        <element id="Extension.extension:type.url">
            <path value="Extension.extension.url" />
            <fixedUri value="type" />
        </element>
        <element id="Extension.extension:type.value[x]">
            <path value="Extension.extension.value[x]" />
            <short value="Address Key Type" />
            <definition value="To identify the type of Address Key recorded." />
            <min value="1" />
            <type>
                <code value="Coding" />
            </type>
            <binding>
                <strength value="extensible" />
                <description value="To identify the type of Address Key recorded" />
                <valueSet value="https://fhir.hl7.org.uk/ValueSet/UKCore-AddressKeyType" />
            </binding>
        </element>
        <element id="Extension.extension:value">
            <path value="Extension.extension" />
            <sliceName value="value" />
            <short value="Address key value" />
            <definition value="To record the value for the address key." />
            <min value="1" />
            <max value="1" />
        </element>
        <element id="Extension.extension:value.url">
            <path value="Extension.extension.url" />
            <fixedUri value="value" />
        </element>
        <element id="Extension.extension:value.value[x]">
            <path value="Extension.extension.value[x]" />
            <short value="Address key value" />
            <definition value="To record the value for the address key." />
            <min value="1" />
            <type>
                <code value="string" />
            </type>
        </element>
        <element id="Extension.url">
            <path value="Extension.url" />
            <fixedUri value="https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-AddressKey" />
        </element>
        <element id="Extension.value[x]">
            <path value="Extension.value[x]" />
            <max value="0" />
        </element>
    </differential>
</StructureDefinition>

JSON View

{
    "resourceType": "StructureDefinition",
    "id": "Extension-UKCore-AddressKey",
    "url": "https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-AddressKey",
    "version": "2.1.0",
    "name": "ExtensionUKCoreAddressKey",
    "title": "Extension UK Core Address Key",
    "status": "active",
    "date": "2021-09-10",
    "publisher": "HL7 UK",
    "contact":  [
        {
            "name": "HL7 UK",
            "telecom":  [
                {
                    "system": "email",
                    "value": "ukcore@hl7.org.uk",
                    "use": "work",
                    "rank": 1
                }
            ]
        }
    ],
    "description": "This carries an address identifier which will be included in an address.",
    "purpose": "This extension extends the Address datatype to support the exchange of the type of address identifier and the address identifier value, which are currently not supported by the FHIR standard.",
    "copyright": "Copyright © 2021+ HL7 UK Licensed under the Apache License, Version 2.0 (the \"License\"); you may not use this file except in compliance with the License. You may obtain a copy of the License at  http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an \"AS IS\" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. HL7® FHIR® standard Copyright © 2011+ HL7 The HL7® FHIR® standard is used under the FHIR license. You may obtain a copy of the FHIR license at  https://www.hl7.org/fhir/license.html.",
    "fhirVersion": "4.0.1",
    "mapping":  [
        {
            "identity": "rim",
            "uri": "http://hl7.org/v3",
            "name": "RIM Mapping"
        }
    ],
    "kind": "complex-type",
    "abstract": false,
    "context":  [
        {
            "type": "element",
            "expression": "Address"
        }
    ],
    "type": "Extension",
    "baseDefinition": "http://hl7.org/fhir/StructureDefinition/Extension",
    "derivation": "constraint",
    "differential": {
        "element":  [
            {
                "id": "Extension",
                "path": "Extension",
                "short": "An extension carrying the address key and type",
                "definition": "An extension carrying the address key and type."
            },
            {
                "id": "Extension.extension",
                "path": "Extension.extension",
                "slicing": {
                    "discriminator":  [
                        {
                            "type": "value",
                            "path": "url"
                        }
                    ],
                    "rules": "open"
                }
            },
            {
                "id": "Extension.extension:type",
                "path": "Extension.extension",
                "sliceName": "type",
                "short": "Address Key Type",
                "definition": "To identify the type of Address Key recorded.",
                "min": 1,
                "max": "1"
            },
            {
                "id": "Extension.extension:type.url",
                "path": "Extension.extension.url",
                "fixedUri": "type"
            },
            {
                "id": "Extension.extension:type.value[x]",
                "path": "Extension.extension.value[x]",
                "short": "Address Key Type",
                "definition": "To identify the type of Address Key recorded.",
                "min": 1,
                "type":  [
                    {
                        "code": "Coding"
                    }
                ],
                "binding": {
                    "strength": "extensible",
                    "description": "To identify the type of Address Key recorded",
                    "valueSet": "https://fhir.hl7.org.uk/ValueSet/UKCore-AddressKeyType"
                }
            },
            {
                "id": "Extension.extension:value",
                "path": "Extension.extension",
                "sliceName": "value",
                "short": "Address key value",
                "definition": "To record the value for the address key.",
                "min": 1,
                "max": "1"
            },
            {
                "id": "Extension.extension:value.url",
                "path": "Extension.extension.url",
                "fixedUri": "value"
            },
            {
                "id": "Extension.extension:value.value[x]",
                "path": "Extension.extension.value[x]",
                "short": "Address key value",
                "definition": "To record the value for the address key.",
                "min": 1,
                "type":  [
                    {
                        "code": "string"
                    }
                ]
            },
            {
                "id": "Extension.url",
                "path": "Extension.url",
                "fixedUri": "https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-AddressKey"
            },
            {
                "id": "Extension.value[x]",
                "path": "Extension.value[x]",
                "max": "0"
            }
        ]
    }
}

Examples

An example to illustrate how the address key information is carried in a patient example.
Example UKCore-Patient-Extension-AddressKey

StructureDefinition Extension-UKCore-AllergyIntoleranceEnd

Supports the date when the allergy or intolerance was no longer valid, and/or, the reason why the allergy or intolerance is no longer valid.

Purpose

This extension extends the AllergyIntolerance resource to support the exchange of information describing the date when the allergy or intolerance was no longer valid, and/or, the reason why the allergy or intolerance is no longer valid, which is currently not supported by the FHIR standard.

Guidance

An optional extension to record the date and reason when the allergy was no longer clinically active.
If the clinicalStatus is active then this extension SHALL be omitted.
If the clinicalStatus is inactive or resolved then the date and reason when the allergy was identified as no longer active SHOULD be populated.

Context of Use
Use on element AllergyIntolerance.clinicalStatus

Snapshot View

url1..1System.StringFixed Value
valueDateTimedateTime
url1..1System.StringFixed Value
valueStringstring
url1..1System.StringFixed Value

Differential View

url1..1System.StringFixed Value
valueDateTimedateTime
url1..1System.StringFixed Value
valueStringstring
url1..1System.StringFixed Value

Hybrid View

url1..1System.StringFixed Value
valueDateTimedateTime
url1..1System.StringFixed Value
valueStringstring
url1..1System.StringFixed Value

Table View

Extension..1
Extension.extension0..
Extension.extension0..1
Extension.extension.url..
Extension.extension.value[x]dateTime1..
Extension.extension0..1
Extension.extension.url..
Extension.extension.value[x]string1..
Extension.url..
Extension.value[x]..0


XML View

<StructureDefinition xmlns="http://hl7.org/fhir">
    <id value="Extension-UKCore-AllergyIntoleranceEnd" />
    <url value="https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-AllergyIntoleranceEnd" />
    <version value="2.2.0" />
    <name value="ExtensionUKCoreAllergyIntoleranceEnd" />
    <title value="Extension UK Core Allergy Intolerance End" />
    <status value="active" />
    <date value="2022-08-26" />
    <publisher value="HL7 UK" />
    <contact>
        <name value="HL7 UK" />
        <telecom>
            <system value="email" />
            <value value="ukcore@hl7.org.uk" />
            <use value="work" />
            <rank value="1" />
        </telecom>
    </contact>
    <description value="Supports the date when the allergy or intolerance was no longer valid, and/or, the reason why the allergy or intolerance is no longer valid." />
    <purpose value="This extension extends the AllergyIntolerance resource to support the exchange of information describing the date when the allergy or intolerance was no longer valid, and/or, the reason why the allergy or intolerance is no longer valid, which is currently not supported by the FHIR standard." />
    <copyright value="Copyright &#169; 2021+ HL7 UK Licensed under the Apache License, Version 2.0 (the &quot;License&quot;); you may not use this file except in compliance with the License. You may obtain a copy of the License at  http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an &quot;AS IS&quot; BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. HL7&#174; FHIR&#174; standard Copyright &#169; 2011+ HL7 The HL7&#174; FHIR&#174; standard is used under the FHIR license. You may obtain a copy of the FHIR license at  https://www.hl7.org/fhir/license.html." />
    <fhirVersion value="4.0.1" />
    <mapping>
        <identity value="rim" />
        <uri value="http://hl7.org/v3" />
        <name value="RIM Mapping" />
    </mapping>
    <kind value="complex-type" />
    <abstract value="false" />
    <context>
        <type value="element" />
        <expression value="AllergyIntolerance.clinicalStatus" />
    </context>
    <type value="Extension" />
    <baseDefinition value="http://hl7.org/fhir/StructureDefinition/Extension" />
    <derivation value="constraint" />
    <differential>
        <element id="Extension">
            <path value="Extension" />
            <short value="Supports the date when the allergy or intolerance was no longer valid, and/or, the reason why the allergy or intolerance is no longer valid." />
            <definition value="Supports the date when the allergy or intolerance was no longer valid, and/or, the reason why the allergy or intolerance is no longer valid." />
            <max value="1" />
        </element>
        <element id="Extension.extension">
            <path value="Extension.extension" />
            <slicing>
                <discriminator>
                    <type value="value" />
                    <path value="url" />
                </discriminator>
                <rules value="open" />
            </slicing>
            <min value="0" />
        </element>
        <element id="Extension.extension:endDate">
            <path value="Extension.extension" />
            <sliceName value="endDate" />
            <short value="The date the allergy or intolerance was recorded as no longer valid" />
            <definition value="The date the allergy or intolerance was recorded as no longer valid." />
            <min value="0" />
            <max value="1" />
        </element>
        <element id="Extension.extension:endDate.url">
            <path value="Extension.extension.url" />
            <fixedUri value="endDate" />
        </element>
        <element id="Extension.extension:endDate.value[x]">
            <path value="Extension.extension.value[x]" />
            <short value="The date the allergy was recorded as no longer valid" />
            <definition value="The date the allergy was recorded as no longer valid." />
            <min value="1" />
            <type>
                <code value="dateTime" />
            </type>
        </element>
        <element id="Extension.extension:reasonEnded">
            <path value="Extension.extension" />
            <sliceName value="reasonEnded" />
            <short value="The reason why the allergy or intolerance has been resolved" />
            <definition value="The reason why the allergy or intolerance has been resolved." />
            <min value="0" />
            <max value="1" />
        </element>
        <element id="Extension.extension:reasonEnded.url">
            <path value="Extension.extension.url" />
            <fixedUri value="reasonEnded" />
        </element>
        <element id="Extension.extension:reasonEnded.value[x]">
            <path value="Extension.extension.value[x]" />
            <short value="The reason why the allergy or intolerance has been resolved" />
            <definition value="The reason why the allergy or intolerance has been resolved." />
            <min value="1" />
            <type>
                <code value="string" />
            </type>
        </element>
        <element id="Extension.url">
            <path value="Extension.url" />
            <fixedUri value="https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-AllergyIntoleranceEnd" />
        </element>
        <element id="Extension.value[x]">
            <path value="Extension.value[x]" />
            <max value="0" />
        </element>
    </differential>
</StructureDefinition>

JSON View

{
    "resourceType": "StructureDefinition",
    "id": "Extension-UKCore-AllergyIntoleranceEnd",
    "url": "https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-AllergyIntoleranceEnd",
    "version": "2.2.0",
    "name": "ExtensionUKCoreAllergyIntoleranceEnd",
    "title": "Extension UK Core Allergy Intolerance End",
    "status": "active",
    "date": "2022-08-26",
    "publisher": "HL7 UK",
    "contact":  [
        {
            "name": "HL7 UK",
            "telecom":  [
                {
                    "system": "email",
                    "value": "ukcore@hl7.org.uk",
                    "use": "work",
                    "rank": 1
                }
            ]
        }
    ],
    "description": "Supports the date when the allergy or intolerance was no longer valid, and/or, the reason why the allergy or intolerance is no longer valid.",
    "purpose": "This extension extends the AllergyIntolerance resource to support the exchange of information describing the date when the allergy or intolerance was no longer valid, and/or, the reason why the allergy or intolerance is no longer valid, which is currently not supported by the FHIR standard.",
    "copyright": "Copyright © 2021+ HL7 UK Licensed under the Apache License, Version 2.0 (the \"License\"); you may not use this file except in compliance with the License. You may obtain a copy of the License at  http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an \"AS IS\" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. HL7® FHIR® standard Copyright © 2011+ HL7 The HL7® FHIR® standard is used under the FHIR license. You may obtain a copy of the FHIR license at  https://www.hl7.org/fhir/license.html.",
    "fhirVersion": "4.0.1",
    "mapping":  [
        {
            "identity": "rim",
            "uri": "http://hl7.org/v3",
            "name": "RIM Mapping"
        }
    ],
    "kind": "complex-type",
    "abstract": false,
    "context":  [
        {
            "type": "element",
            "expression": "AllergyIntolerance.clinicalStatus"
        }
    ],
    "type": "Extension",
    "baseDefinition": "http://hl7.org/fhir/StructureDefinition/Extension",
    "derivation": "constraint",
    "differential": {
        "element":  [
            {
                "id": "Extension",
                "path": "Extension",
                "short": "Supports the date when the allergy or intolerance was no longer valid, and/or, the reason why the allergy or intolerance is no longer valid.",
                "definition": "Supports the date when the allergy or intolerance was no longer valid, and/or, the reason why the allergy or intolerance is no longer valid.",
                "max": "1"
            },
            {
                "id": "Extension.extension",
                "path": "Extension.extension",
                "slicing": {
                    "discriminator":  [
                        {
                            "type": "value",
                            "path": "url"
                        }
                    ],
                    "rules": "open"
                },
                "min": 0
            },
            {
                "id": "Extension.extension:endDate",
                "path": "Extension.extension",
                "sliceName": "endDate",
                "short": "The date the allergy or intolerance was recorded as no longer valid",
                "definition": "The date the allergy or intolerance was recorded as no longer valid.",
                "min": 0,
                "max": "1"
            },
            {
                "id": "Extension.extension:endDate.url",
                "path": "Extension.extension.url",
                "fixedUri": "endDate"
            },
            {
                "id": "Extension.extension:endDate.value[x]",
                "path": "Extension.extension.value[x]",
                "short": "The date the allergy was recorded as no longer valid",
                "definition": "The date the allergy was recorded as no longer valid.",
                "min": 1,
                "type":  [
                    {
                        "code": "dateTime"
                    }
                ]
            },
            {
                "id": "Extension.extension:reasonEnded",
                "path": "Extension.extension",
                "sliceName": "reasonEnded",
                "short": "The reason why the allergy or intolerance has been resolved",
                "definition": "The reason why the allergy or intolerance has been resolved.",
                "min": 0,
                "max": "1"
            },
            {
                "id": "Extension.extension:reasonEnded.url",
                "path": "Extension.extension.url",
                "fixedUri": "reasonEnded"
            },
            {
                "id": "Extension.extension:reasonEnded.value[x]",
                "path": "Extension.extension.value[x]",
                "short": "The reason why the allergy or intolerance has been resolved",
                "definition": "The reason why the allergy or intolerance has been resolved.",
                "min": 1,
                "type":  [
                    {
                        "code": "string"
                    }
                ]
            },
            {
                "id": "Extension.url",
                "path": "Extension.url",
                "fixedUri": "https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-AllergyIntoleranceEnd"
            },
            {
                "id": "Extension.value[x]",
                "path": "Extension.value[x]",
                "max": "0"
            }
        ]
    }
}

StructureDefinition Extension-UKCore-BirthSex

An extension to support the patient's phenotypic sex at birth.

Purpose

This extension extends the Patient resource to support the exchange of the patient's phenotypic sex at birth information as a Code, which is currently not supported by the FHIR standard.

Context of Use
Use on element Patient

Snapshot View

url1..1System.StringFixed Value
valueCodecode

Differential View

url1..1System.StringFixed Value
valueCodecode

Hybrid View

url1..1System.StringFixed Value
valueCodecode

Table View

Extension..1
Extension.url..
Extension.value[x]code1..


XML View

<StructureDefinition xmlns="http://hl7.org/fhir">
    <id value="Extension-UKCore-BirthSex" />
    <url value="https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-BirthSex" />
    <version value="1.0.0" />
    <name value="ExtensionUKCoreBirthSex" />
    <title value="Extension UK Core Birth Sex" />
    <status value="active" />
    <date value="2021-09-10" />
    <publisher value="HL7 UK" />
    <contact>
        <name value="HL7 UK" />
        <telecom>
            <system value="email" />
            <value value="ukcore@hl7.org.uk" />
            <use value="work" />
            <rank value="1" />
        </telecom>
    </contact>
    <description value="An extension to support the patient&#39;s phenotypic sex at birth." />
    <purpose value="This extension extends the Patient resource to support the exchange of the patient&#39;s phenotypic sex at birth information, as a Codeable Concept, which is currently not supported by the FHIR standard." />
    <copyright value="Copyright &#169; 2021+ HL7 UK Licensed under the Apache License, Version 2.0 (the &quot;License&quot;); you may not use this file except in compliance with the License. You may obtain a copy of the License at  http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an &quot;AS IS&quot; BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. HL7&#174; FHIR&#174; standard Copyright &#169; 2011+ HL7 The HL7&#174; FHIR&#174; standard is used under the FHIR license. You may obtain a copy of the FHIR license at  https://www.hl7.org/fhir/license.html." />
    <fhirVersion value="4.0.1" />
    <mapping>
        <identity value="rim" />
        <uri value="http://hl7.org/v3" />
        <name value="RIM Mapping" />
    </mapping>
    <kind value="complex-type" />
    <abstract value="false" />
    <context>
        <type value="element" />
        <expression value="Patient" />
    </context>
    <type value="Extension" />
    <baseDefinition value="http://hl7.org/fhir/StructureDefinition/Extension" />
    <derivation value="constraint" />
    <differential>
        <element id="Extension">
            <path value="Extension" />
            <short value="An extension to support the patient&#39;s phenotypic sex at birth." />
            <definition value="An extension to support the patient&#39;s phenotypic sex at birth." />
            <max value="1" />
        </element>
        <element id="Extension.url">
            <path value="Extension.url" />
            <fixedUri value="https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-BirthSex" />
        </element>
        <element id="Extension.value[x]">
            <path value="Extension.value[x]" />
            <short value="A code that defines a patient&#39;s phenotypic sex at birth." />
            <definition value="A code that defines a patient&#39;s phenotypic sex at birth." />
            <min value="1" />
            <type>
                <code value="code" />
            </type>
            <binding>
                <strength value="required" />
                <valueSet value="https://fhir.hl7.org.uk/ValueSet/UKCore-BirthSex" />
            </binding>
        </element>
    </differential>
</StructureDefinition>

JSON View

{
    "resourceType": "StructureDefinition",
    "id": "Extension-UKCore-BirthSex",
    "url": "https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-BirthSex",
    "version": "1.0.0",
    "name": "ExtensionUKCoreBirthSex",
    "title": "Extension UK Core Birth Sex",
    "status": "active",
    "date": "2021-09-10",
    "publisher": "HL7 UK",
    "contact":  [
        {
            "name": "HL7 UK",
            "telecom":  [
                {
                    "system": "email",
                    "value": "ukcore@hl7.org.uk",
                    "use": "work",
                    "rank": 1
                }
            ]
        }
    ],
    "description": "An extension to support the patient's phenotypic sex at birth.",
    "purpose": "This extension extends the Patient resource to support the exchange of the patient's phenotypic sex at birth information, as a Codeable Concept, which is currently not supported by the FHIR standard.",
    "copyright": "Copyright © 2021+ HL7 UK Licensed under the Apache License, Version 2.0 (the \"License\"); you may not use this file except in compliance with the License. You may obtain a copy of the License at  http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an \"AS IS\" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. HL7® FHIR® standard Copyright © 2011+ HL7 The HL7® FHIR® standard is used under the FHIR license. You may obtain a copy of the FHIR license at  https://www.hl7.org/fhir/license.html.",
    "fhirVersion": "4.0.1",
    "mapping":  [
        {
            "identity": "rim",
            "uri": "http://hl7.org/v3",
            "name": "RIM Mapping"
        }
    ],
    "kind": "complex-type",
    "abstract": false,
    "context":  [
        {
            "type": "element",
            "expression": "Patient"
        }
    ],
    "type": "Extension",
    "baseDefinition": "http://hl7.org/fhir/StructureDefinition/Extension",
    "derivation": "constraint",
    "differential": {
        "element":  [
            {
                "id": "Extension",
                "path": "Extension",
                "short": "An extension to support the patient's phenotypic sex at birth.",
                "definition": "An extension to support the patient's phenotypic sex at birth.",
                "max": "1"
            },
            {
                "id": "Extension.url",
                "path": "Extension.url",
                "fixedUri": "https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-BirthSex"
            },
            {
                "id": "Extension.value[x]",
                "path": "Extension.value[x]",
                "short": "A code that defines a patient's phenotypic sex at birth.",
                "definition": "A code that defines a patient's phenotypic sex at birth.",
                "min": 1,
                "type":  [
                    {
                        "code": "code"
                    }
                ],
                "binding": {
                    "strength": "required",
                    "valueSet": "https://fhir.hl7.org.uk/ValueSet/UKCore-BirthSex"
                }
            }
        ]
    }
}

JSON View

{
    "resourceType": "StructureDefinition",
    "id": "Extension-UKCore-BirthSex",
    "url": "https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-BirthSex",
    "version": "1.0.0",
    "name": "ExtensionUKCoreBirthSex",
    "title": "Extension UK Core Birth Sex",
    "status": "active",
    "date": "2021-09-10",
    "publisher": "HL7 UK",
    "contact":  [
        {
            "name": "HL7 UK",
            "telecom":  [
                {
                    "system": "email",
                    "value": "ukcore@hl7.org.uk",
                    "use": "work",
                    "rank": 1
                }
            ]
        }
    ],
    "description": "An extension to support the patient's phenotypic sex at birth.",
    "purpose": "This extension extends the Patient resource to support the exchange of the patient's phenotypic sex at birth information, as a Codeable Concept, which is currently not supported by the FHIR standard.",
    "copyright": "Copyright © 2021+ HL7 UK Licensed under the Apache License, Version 2.0 (the \"License\"); you may not use this file except in compliance with the License. You may obtain a copy of the License at  http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an \"AS IS\" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. HL7® FHIR® standard Copyright © 2011+ HL7 The HL7® FHIR® standard is used under the FHIR license. You may obtain a copy of the FHIR license at  https://www.hl7.org/fhir/license.html.",
    "fhirVersion": "4.0.1",
    "mapping":  [
        {
            "identity": "rim",
            "uri": "http://hl7.org/v3",
            "name": "RIM Mapping"
        }
    ],
    "kind": "complex-type",
    "abstract": false,
    "context":  [
        {
            "type": "element",
            "expression": "Patient"
        }
    ],
    "type": "Extension",
    "baseDefinition": "http://hl7.org/fhir/StructureDefinition/Extension",
    "derivation": "constraint",
    "differential": {
        "element":  [
            {
                "id": "Extension",
                "path": "Extension",
                "short": "An extension to support the patient's phenotypic sex at birth.",
                "definition": "An extension to support the patient's phenotypic sex at birth.",
                "max": "1"
            },
            {
                "id": "Extension.url",
                "path": "Extension.url",
                "fixedUri": "https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-BirthSex"
            },
            {
                "id": "Extension.value[x]",
                "path": "Extension.value[x]",
                "short": "A code that defines a patient's phenotypic sex at birth.",
                "definition": "A code that defines a patient's phenotypic sex at birth.",
                "min": 1,
                "type":  [
                    {
                        "code": "code"
                    }
                ],
                "binding": {
                    "strength": "required",
                    "valueSet": "https://fhir.hl7.org.uk/ValueSet/UKCore-BirthSex"
                }
            }
        ]
    }
}

StructureDefinition Extension-UKCore-CodingSCTDescDisplay

The description display term for a SNOMED CT concept. The display term is important to enable the representation of the exact term that was entered by the clinician that recorded the data, or the exact term that a legacy code e.g. a Read v2 code has been translated to using an assured mapping table.

Purpose

This extension supplements the coding-sctdescid extension to support the exchange of the selected display term for a SNOMED CT concept, which is currently not supported by the FHIR standard.

Context of Use
Use on element Coding

Snapshot View

extensionI0..0Extension
url1..1System.StringFixed Value
valueStringstring

Differential View

extensionI0..0Extension
url1..1System.StringFixed Value
valueStringstring

Hybrid View

extensionI0..0Extension
url1..1System.StringFixed Value
valueStringstring

Table View

Extension0..1
Extension.extension..0
Extension.url..
Extension.value[x]string1..


XML View

<StructureDefinition xmlns="http://hl7.org/fhir">
    <id value="Extension-UKCore-CodingSCTDescDisplay" />
    <url value="https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-CodingSCTDescDisplay" />
    <version value="1.0.0" />
    <name value="ExtensionUKCoreCodingSCTDescDisplay" />
    <title value="Extension UK Core Coding SCT Description Display" />
    <status value="active" />
    <date value="2022-08-26" />
    <publisher value="HL7 UK" />
    <contact>
        <name value="HL7 UK" />
        <telecom>
            <system value="email" />
            <value value="ukcore@hl7.org.uk" />
            <use value="work" />
            <rank value="1" />
        </telecom>
    </contact>
    <description value="The description display term for a SNOMED CT concept.  The description display term associated with the ID within the sctdescid extension is important to enable the representation of the exact term that was entered by the clinician that recorded the data, or the exact term that a legacy code e.g. a Read v2 code has been translated to using an assured mapping table." />
    <purpose value="This extension extends the sctdescid extension to support the exchange of the selected description display term for a SNOMED CT concept, which is currently not supported by the FHIR standard." />
    <copyright value="Copyright &#169; 2021+ HL7 UK Licensed under the Apache License, Version 2.0 (the &quot;License&quot;); you may not use this file except in compliance with the License. You may obtain a copy of the License at  http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an &quot;AS IS&quot; BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. HL7&#174; FHIR&#174; standard Copyright &#169; 2011+ HL7 The HL7&#174; FHIR&#174; standard is used under the FHIR license. You may obtain a copy of the FHIR license at  https://www.hl7.org/fhir/license.html." />
    <fhirVersion value="4.0.1" />
    <mapping>
        <identity value="rim" />
        <uri value="http://hl7.org/v3" />
        <name value="RIM Mapping" />
    </mapping>
    <kind value="complex-type" />
    <abstract value="false" />
    <context>
        <type value="element" />
        <expression value="Coding" />
    </context>
    <type value="Extension" />
    <baseDefinition value="http://hl7.org/fhir/StructureDefinition/Extension" />
    <derivation value="constraint" />
    <differential>
        <element id="Extension">
            <path value="Extension" />
            <short value="SNOMED CT Description ID" />
            <definition value="To record the SNOMED CT Description Display term actually selected" />
            <min value="0" />
            <max value="1" />
            <mapping>
                <identity value="v2" />
                <map value="N/A" />
            </mapping>
            <mapping>
                <identity value="rim" />
                <map value="n/a" />
            </mapping>
        </element>
        <element id="Extension.extension">
            <path value="Extension.extension" />
            <max value="0" />
        </element>
        <element id="Extension.url">
            <path value="Extension.url" />
            <fixedUri value="https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-CodingSCTDescDisplay" />
        </element>
        <element id="Extension.value[x]">
            <path value="Extension.value[x]" />
            <min value="1" />
            <type>
                <code value="string" />
            </type>
        </element>
    </differential>
</StructureDefinition>

JSON View

{
    "resourceType": "StructureDefinition",
    "id": "Extension-UKCore-CodingSCTDescDisplay",
    "url": "https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-CodingSCTDescDisplay",
    "version": "1.0.0",
    "name": "ExtensionUKCoreCodingSCTDescDisplay",
    "title": "Extension UK Core Coding SCT Description Display",
    "status": "active",
    "date": "2022-08-26",
    "publisher": "HL7 UK",
    "contact":  [
        {
            "name": "HL7 UK",
            "telecom":  [
                {
                    "system": "email",
                    "value": "ukcore@hl7.org.uk",
                    "use": "work",
                    "rank": 1
                }
            ]
        }
    ],
    "description": "The description display term for a SNOMED CT concept.  The description display term associated with the ID within the sctdescid extension is important to enable the representation of the exact term that was entered by the clinician that recorded the data, or the exact term that a legacy code e.g. a Read v2 code has been translated to using an assured mapping table.",
    "purpose": "This extension extends the sctdescid extension to support the exchange of the selected description display term for a SNOMED CT concept, which is currently not supported by the FHIR standard.",
    "copyright": "Copyright © 2021+ HL7 UK Licensed under the Apache License, Version 2.0 (the \"License\"); you may not use this file except in compliance with the License. You may obtain a copy of the License at  http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an \"AS IS\" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. HL7® FHIR® standard Copyright © 2011+ HL7 The HL7® FHIR® standard is used under the FHIR license. You may obtain a copy of the FHIR license at  https://www.hl7.org/fhir/license.html.",
    "fhirVersion": "4.0.1",
    "mapping":  [
        {
            "identity": "rim",
            "uri": "http://hl7.org/v3",
            "name": "RIM Mapping"
        }
    ],
    "kind": "complex-type",
    "abstract": false,
    "context":  [
        {
            "type": "element",
            "expression": "Coding"
        }
    ],
    "type": "Extension",
    "baseDefinition": "http://hl7.org/fhir/StructureDefinition/Extension",
    "derivation": "constraint",
    "differential": {
        "element":  [
            {
                "id": "Extension",
                "path": "Extension",
                "short": "SNOMED CT Description ID",
                "definition": "To record the SNOMED CT Description Display term actually selected",
                "min": 0,
                "max": "1",
                "mapping":  [
                    {
                        "identity": "v2",
                        "map": "N/A"
                    },
                    {
                        "identity": "rim",
                        "map": "n/a"
                    }
                ]
            },
            {
                "id": "Extension.extension",
                "path": "Extension.extension",
                "max": "0"
            },
            {
                "id": "Extension.url",
                "path": "Extension.url",
                "fixedUri": "https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-CodingSCTDescDisplay"
            },
            {
                "id": "Extension.value[x]",
                "path": "Extension.value[x]",
                "min": 1,
                "type":  [
                    {
                        "code": "string"
                    }
                ]
            }
        ]
    }
}

Examples

Examples to illustrate the use of the extension to adding a SNOMED CT description Id and Term can be found within the CodeableConcept Guidance.


StructureDefinition Extension-UKCore-ContactPreference

The preferred method of contact, contact times and written communication format given by a Patient or Related Person.

Purpose

This extension extends the Patient and RelatedPerson resources to support the exchange of their preferred method of contact, contact times and written communication format, which are currently not supported by the FHIR standard.

Context of Use
Use on element RelatedPerson
Patient

Snapshot View

url1..1System.StringFixed Value
valueCodeableConceptCodeableConcept
url1..1System.StringFixed Value
valueStringstring
valueTimingTiming
url1..1System.StringFixed Value
valueCodeableConceptCodeableConcept
url1..1System.StringFixed Value

Differential View

url1..1System.StringFixed Value
valueCodeableConceptCodeableConcept
url1..1System.StringFixed Value
valueStringstring
valueTimingTiming
url1..1System.StringFixed Value
valueCodeableConceptCodeableConcept
url1..1System.StringFixed Value

Hybrid View

url1..1System.StringFixed Value
valueCodeableConceptCodeableConcept
url1..1System.StringFixed Value
valueStringstring
valueTimingTiming
url1..1System.StringFixed Value
valueCodeableConceptCodeableConcept
url1..1System.StringFixed Value

Table View

Extension..1
Extension.extension0..
Extension.extension0..1
Extension.extension.url..
Extension.extension.value[x]CodeableConcept1..
Extension.extension0..1
Extension.extension.url..
Extension.extension.value[x]string, Timing1..
Extension.extension0..1
Extension.extension.url..
Extension.extension.value[x]CodeableConcept1..
Extension.url..
Extension.value[x]..0


XML View

<StructureDefinition xmlns="http://hl7.org/fhir">
    <id value="Extension-UKCore-ContactPreference" />
    <url value="https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-ContactPreference" />
    <version value="2.2.0" />
    <name value="ExtensionUKCoreContactPreference" />
    <title value="Extension UK Core Contact Preference" />
    <status value="active" />
    <date value="2022-01-07" />
    <publisher value="HL7 UK" />
    <contact>
        <name value="HL7 UK" />
        <telecom>
            <system value="email" />
            <value value="ukcore@hl7.org.uk" />
            <use value="work" />
            <rank value="1" />
        </telecom>
    </contact>
    <description value="The preferred method of contact, contact times and written communication format given by a Patient or Related Person." />
    <purpose value="This extension extends the Patient and RelatedPerson resources to support the exchange of their preferred method of contact, contact times and written communication format, which are currently not supported by the FHIR standard." />
    <copyright value="Copyright &#169; 2021+ HL7 UK Licensed under the Apache License, Version 2.0 (the &quot;License&quot;); you may not use this file except in compliance with the License. You may obtain a copy of the License at  http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an &quot;AS IS&quot; BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. HL7&#174; FHIR&#174; standard Copyright &#169; 2011+ HL7 The HL7&#174; FHIR&#174; standard is used under the FHIR license. You may obtain a copy of the FHIR license at  https://www.hl7.org/fhir/license.html." />
    <fhirVersion value="4.0.1" />
    <mapping>
        <identity value="rim" />
        <uri value="http://hl7.org/v3" />
        <name value="RIM Mapping" />
    </mapping>
    <kind value="complex-type" />
    <abstract value="false" />
    <context>
        <type value="element" />
        <expression value="Patient" />
    </context>
    <context>
        <type value="element" />
        <expression value="RelatedPerson" />
    </context>
    <type value="Extension" />
    <baseDefinition value="http://hl7.org/fhir/StructureDefinition/Extension" />
    <derivation value="constraint" />
    <differential>
        <element id="Extension">
            <path value="Extension" />
            <short value="The preferred method of contact, contact times and written communication format given by a Patient or Related Person." />
            <definition value="The preferred method of contact, contact times and written communication format given by a Patient or Related Person." />
            <max value="1" />
        </element>
        <element id="Extension.extension">
            <path value="Extension.extension" />
            <slicing>
                <discriminator>
                    <type value="value" />
                    <path value="url" />
                </discriminator>
                <rules value="open" />
            </slicing>
            <min value="0" />
        </element>
        <element id="Extension.extension:PreferredContactMethod">
            <path value="Extension.extension" />
            <sliceName value="PreferredContactMethod" />
            <short value="Preferred Contact Method" />
            <definition value="The preferred method of contact given by a Patient or Related Person." />
            <min value="0" />
            <max value="1" />
        </element>
        <element id="Extension.extension:PreferredContactMethod.url">
            <path value="Extension.extension.url" />
            <fixedUri value="PreferredContactMethod" />
        </element>
        <element id="Extension.extension:PreferredContactMethod.value[x]">
            <path value="Extension.extension.value[x]" />
            <short value="Preferred Contact Method" />
            <definition value="The preferred method of contact given by a Patient or Related Person." />
            <min value="1" />
            <type>
                <code value="CodeableConcept" />
            </type>
            <binding>
                <strength value="extensible" />
                <valueSet value="https://fhir.hl7.org.uk/ValueSet/UKCore-PreferredContactMethod" />
            </binding>
        </element>
        <element id="Extension.extension:PreferredContactTimes">
            <path value="Extension.extension" />
            <sliceName value="PreferredContactTimes" />
            <short value="Preferred Contact Times" />
            <definition value="The preferred contact times given by a Patient or Related Person." />
            <min value="0" />
            <max value="1" />
        </element>
        <element id="Extension.extension:PreferredContactTimes.url">
            <path value="Extension.extension.url" />
            <fixedUri value="PreferredContactTimes" />
        </element>
        <element id="Extension.extension:PreferredContactTimes.value[x]">
            <path value="Extension.extension.value[x]" />
            <short value="Preferred Contact Times" />
            <definition value="The preferred contact time period given by a Patient or Related Person." />
            <min value="1" />
            <type>
                <code value="string" />
            </type>
            <type>
                <code value="Timing" />
            </type>
        </element>
        <element id="Extension.extension:PreferredWrittenCommunicationFormat">
            <path value="Extension.extension" />
            <sliceName value="PreferredWrittenCommunicationFormat" />
            <short value="Preferred Written Communication Format" />
            <definition value="The preferred written communication format given by a Patient or Related Person." />
            <min value="0" />
            <max value="1" />
        </element>
        <element id="Extension.extension:PreferredWrittenCommunicationFormat.url">
            <path value="Extension.extension.url" />
            <fixedUri value="PreferredWrittenCommunicationFormat" />
        </element>
        <element id="Extension.extension:PreferredWrittenCommunicationFormat.value[x]">
            <path value="Extension.extension.value[x]" />
            <short value="Preferred Written Communication Format" />
            <definition value="The preferred written communication format given by a Patient or Related Person." />
            <min value="1" />
            <type>
                <code value="CodeableConcept" />
            </type>
            <binding>
                <strength value="extensible" />
                <valueSet value="https://fhir.hl7.org.uk/ValueSet/UKCore-PreferredWrittenCommunicationFormat" />
            </binding>
        </element>
        <element id="Extension.url">
            <path value="Extension.url" />
            <fixedUri value="https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-ContactPreference" />
        </element>
        <element id="Extension.value[x]">
            <path value="Extension.value[x]" />
            <max value="0" />
        </element>
    </differential>
</StructureDefinition>

JSON View

{
    "resourceType": "StructureDefinition",
    "id": "Extension-UKCore-ContactPreference",
    "url": "https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-ContactPreference",
    "version": "2.2.0",
    "name": "ExtensionUKCoreContactPreference",
    "title": "Extension UK Core Contact Preference",
    "status": "active",
    "date": "2022-01-07",
    "publisher": "HL7 UK",
    "contact":  [
        {
            "name": "HL7 UK",
            "telecom":  [
                {
                    "system": "email",
                    "value": "ukcore@hl7.org.uk",
                    "use": "work",
                    "rank": 1
                }
            ]
        }
    ],
    "description": "The preferred method of contact, contact times and written communication format given by a Patient or Related Person.",
    "purpose": "This extension extends the Patient and RelatedPerson resources to support the exchange of their preferred method of contact, contact times and written communication format, which are currently not supported by the FHIR standard.",
    "copyright": "Copyright © 2021+ HL7 UK Licensed under the Apache License, Version 2.0 (the \"License\"); you may not use this file except in compliance with the License. You may obtain a copy of the License at  http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an \"AS IS\" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. HL7® FHIR® standard Copyright © 2011+ HL7 The HL7® FHIR® standard is used under the FHIR license. You may obtain a copy of the FHIR license at  https://www.hl7.org/fhir/license.html.",
    "fhirVersion": "4.0.1",
    "mapping":  [
        {
            "identity": "rim",
            "uri": "http://hl7.org/v3",
            "name": "RIM Mapping"
        }
    ],
    "kind": "complex-type",
    "abstract": false,
    "context":  [
        {
            "type": "element",
            "expression": "Patient"
        },
        {
            "type": "element",
            "expression": "RelatedPerson"
        }
    ],
    "type": "Extension",
    "baseDefinition": "http://hl7.org/fhir/StructureDefinition/Extension",
    "derivation": "constraint",
    "differential": {
        "element":  [
            {
                "id": "Extension",
                "path": "Extension",
                "short": "The preferred method of contact, contact times and written communication format given by a Patient or Related Person.",
                "definition": "The preferred method of contact, contact times and written communication format given by a Patient or Related Person.",
                "max": "1"
            },
            {
                "id": "Extension.extension",
                "path": "Extension.extension",
                "slicing": {
                    "discriminator":  [
                        {
                            "type": "value",
                            "path": "url"
                        }
                    ],
                    "rules": "open"
                },
                "min": 0
            },
            {
                "id": "Extension.extension:PreferredContactMethod",
                "path": "Extension.extension",
                "sliceName": "PreferredContactMethod",
                "short": "Preferred Contact Method",
                "definition": "The preferred method of contact given by a Patient or Related Person.",
                "min": 0,
                "max": "1"
            },
            {
                "id": "Extension.extension:PreferredContactMethod.url",
                "path": "Extension.extension.url",
                "fixedUri": "PreferredContactMethod"
            },
            {
                "id": "Extension.extension:PreferredContactMethod.value[x]",
                "path": "Extension.extension.value[x]",
                "short": "Preferred Contact Method",
                "definition": "The preferred method of contact given by a Patient or Related Person.",
                "min": 1,
                "type":  [
                    {
                        "code": "CodeableConcept"
                    }
                ],
                "binding": {
                    "strength": "extensible",
                    "valueSet": "https://fhir.hl7.org.uk/ValueSet/UKCore-PreferredContactMethod"
                }
            },
            {
                "id": "Extension.extension:PreferredContactTimes",
                "path": "Extension.extension",
                "sliceName": "PreferredContactTimes",
                "short": "Preferred Contact Times",
                "definition": "The preferred contact times given by a Patient or Related Person.",
                "min": 0,
                "max": "1"
            },
            {
                "id": "Extension.extension:PreferredContactTimes.url",
                "path": "Extension.extension.url",
                "fixedUri": "PreferredContactTimes"
            },
            {
                "id": "Extension.extension:PreferredContactTimes.value[x]",
                "path": "Extension.extension.value[x]",
                "short": "Preferred Contact Times",
                "definition": "The preferred contact time period given by a Patient or Related Person.",
                "min": 1,
                "type":  [
                    {
                        "code": "string"
                    },
                    {
                        "code": "Timing"
                    }
                ]
            },
            {
                "id": "Extension.extension:PreferredWrittenCommunicationFormat",
                "path": "Extension.extension",
                "sliceName": "PreferredWrittenCommunicationFormat",
                "short": "Preferred Written Communication Format",
                "definition": "The preferred written communication format given by a Patient or Related Person.",
                "min": 0,
                "max": "1"
            },
            {
                "id": "Extension.extension:PreferredWrittenCommunicationFormat.url",
                "path": "Extension.extension.url",
                "fixedUri": "PreferredWrittenCommunicationFormat"
            },
            {
                "id": "Extension.extension:PreferredWrittenCommunicationFormat.value[x]",
                "path": "Extension.extension.value[x]",
                "short": "Preferred Written Communication Format",
                "definition": "The preferred written communication format given by a Patient or Related Person.",
                "min": 1,
                "type":  [
                    {
                        "code": "CodeableConcept"
                    }
                ],
                "binding": {
                    "strength": "extensible",
                    "valueSet": "https://fhir.hl7.org.uk/ValueSet/UKCore-PreferredWrittenCommunicationFormat"
                }
            },
            {
                "id": "Extension.url",
                "path": "Extension.url",
                "fixedUri": "https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-ContactPreference"
            },
            {
                "id": "Extension.value[x]",
                "path": "Extension.value[x]",
                "max": "0"
            }
        ]
    }
}

StructureDefinition Extension-UKCore-ContactRank

The preferred ranking or order of contact applied to a contact on a Patient's contact list. This is independent of the relationship type as specified in the contact.relationship element.

Purpose

This extension extends the Patient resource to support the exchange of the preferred ranking or order of contact applied to a contact on a Patient's contact list, which is currently not supported by the FHIR standard.

Context of Use
Use on element Patient.contact

Snapshot View

url1..1System.StringFixed Value
valuePositiveIntpositiveInt

Differential View

url1..1System.StringFixed Value
valuePositiveIntpositiveInt

Hybrid View

url1..1System.StringFixed Value
valuePositiveIntpositiveInt

Table View

Extension..1
Extension.url..
Extension.value[x]positiveInt1..


XML View

<StructureDefinition xmlns="http://hl7.org/fhir">
    <id value="Extension-UKCore-ContactRank" />
    <url value="https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-ContactRank" />
    <version value="2.2.0" />
    <name value="ExtensionUKCoreContactRank" />
    <title value="Extension UK Core Contact Rank" />
    <status value="active" />
    <date value="2022-08-26" />
    <publisher value="HL7 UK" />
    <contact>
        <name value="HL7 UK" />
        <telecom>
            <system value="email" />
            <value value="ukcore@hl7.org.uk" />
            <use value="work" />
            <rank value="1" />
        </telecom>
    </contact>
    <description value="The preferred ranking or order of contact applied to a contact on a Patient&#39;s contact list." />
    <purpose value="This extension extends the Patient resource to support the exchange of the preferred ranking or order of contact applied to a contact on a Patient&#39;s contact list, which is currently not supported by the FHIR standard." />
    <copyright value="Copyright &#169; 2021+ HL7 UK Licensed under the Apache License, Version 2.0 (the &quot;License&quot;); you may not use this file except in compliance with the License. You may obtain a copy of the License at  http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an &quot;AS IS&quot; BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. HL7&#174; FHIR&#174; standard Copyright &#169; 2011+ HL7 The HL7&#174; FHIR&#174; standard is used under the FHIR license. You may obtain a copy of the FHIR license at  https://www.hl7.org/fhir/license.html." />
    <fhirVersion value="4.0.1" />
    <mapping>
        <identity value="rim" />
        <uri value="http://hl7.org/v3" />
        <name value="RIM Mapping" />
    </mapping>
    <kind value="complex-type" />
    <abstract value="false" />
    <context>
        <type value="element" />
        <expression value="Patient.contact" />
    </context>
    <type value="Extension" />
    <baseDefinition value="http://hl7.org/fhir/StructureDefinition/Extension" />
    <derivation value="constraint" />
    <differential>
        <element id="Extension">
            <path value="Extension" />
            <short value="Preferred ranking or order of contact applied to a contact on a patient&#39;s contact list" />
            <definition value="The preferred ranking or order of contact applied to a contact on a patient&#39;s contact list." />
            <max value="1" />
        </element>
        <element id="Extension.url">
            <path value="Extension.url" />
            <fixedUri value="https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-ContactRank" />
        </element>
        <element id="Extension.value[x]">
            <path value="Extension.value[x]" />
            <short value="The preferred ranking or order of contact applied to a contact on a patient&#39;s contact list" />
            <definition value="The preferred ranking or order of contact applied to a contact on a patient&#39;s contact list." />
            <min value="1" />
            <type>
                <code value="positiveInt" />
            </type>
        </element>
    </differential>
</StructureDefinition>

JSON View

{
    "resourceType": "StructureDefinition",
    "id": "Extension-UKCore-ContactRank",
    "url": "https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-ContactRank",
    "version": "2.2.0",
    "name": "ExtensionUKCoreContactRank",
    "title": "Extension UK Core Contact Rank",
    "status": "active",
    "date": "2022-08-26",
    "publisher": "HL7 UK",
    "contact":  [
        {
            "name": "HL7 UK",
            "telecom":  [
                {
                    "system": "email",
                    "value": "ukcore@hl7.org.uk",
                    "use": "work",
                    "rank": 1
                }
            ]
        }
    ],
    "description": "The preferred ranking or order of contact applied to a contact on a Patient's contact list.",
    "purpose": "This extension extends the Patient resource to support the exchange of the preferred ranking or order of contact applied to a contact on a Patient's contact list, which is currently not supported by the FHIR standard.",
    "copyright": "Copyright © 2021+ HL7 UK Licensed under the Apache License, Version 2.0 (the \"License\"); you may not use this file except in compliance with the License. You may obtain a copy of the License at  http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an \"AS IS\" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. HL7® FHIR® standard Copyright © 2011+ HL7 The HL7® FHIR® standard is used under the FHIR license. You may obtain a copy of the FHIR license at  https://www.hl7.org/fhir/license.html.",
    "fhirVersion": "4.0.1",
    "mapping":  [
        {
            "identity": "rim",
            "uri": "http://hl7.org/v3",
            "name": "RIM Mapping"
        }
    ],
    "kind": "complex-type",
    "abstract": false,
    "context":  [
        {
            "type": "element",
            "expression": "Patient.contact"
        }
    ],
    "type": "Extension",
    "baseDefinition": "http://hl7.org/fhir/StructureDefinition/Extension",
    "derivation": "constraint",
    "differential": {
        "element":  [
            {
                "id": "Extension",
                "path": "Extension",
                "short": "Preferred ranking or order of contact applied to a contact on a patient's contact list",
                "definition": "The preferred ranking or order of contact applied to a contact on a patient's contact list.",
                "max": "1"
            },
            {
                "id": "Extension.url",
                "path": "Extension.url",
                "fixedUri": "https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-ContactRank"
            },
            {
                "id": "Extension.value[x]",
                "path": "Extension.value[x]",
                "short": "The preferred ranking or order of contact applied to a contact on a patient's contact list",
                "definition": "The preferred ranking or order of contact applied to a contact on a patient's contact list.",
                "min": 1,
                "type":  [
                    {
                        "code": "positiveInt"
                    }
                ]
            }
        ]
    }
}

StructureDefinition Extension-UKCore-CopyCorrespondenceIndicator

Indicates that a Patient contact or RelatedPerson SHALL be copied in to Patient correspondence.

Purpose

This extension extends the Patient and RelatedPerson resources, to support the exchange of information to indicate that a Patient contact or RelatedPerson SHALL be copied in to Patient correspondence. This is currently not supported by the FHIR standard.

Context of Use
Use on element RelatedPerson
Patient.contact

Snapshot View

url1..1System.StringFixed Value
valueBooleanboolean

Differential View

url1..1System.StringFixed Value
valueBooleanboolean

Hybrid View

url1..1System.StringFixed Value
valueBooleanboolean

Table View

Extension..1
Extension.url..
Extension.value[x]boolean1..


XML View

<StructureDefinition xmlns="http://hl7.org/fhir">
    <id value="Extension-UKCore-CopyCorrespondenceIndicator" />
    <url value="https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-CopyCorrespondenceIndicator" />
    <version value="2.2.0" />
    <name value="ExtensionUKCoreCopyCorrespondenceIndicator" />
    <title value="Extension UK Core Copy Correspondence Indicator" />
    <status value="active" />
    <date value="2022-08-26" />
    <publisher value="HL7 UK" />
    <contact>
        <name value="HL7 UK" />
        <telecom>
            <system value="email" />
            <value value="ukcore@hl7.org.uk" />
            <use value="work" />
            <rank value="1" />
        </telecom>
    </contact>
    <description value="Indicates that a Patient contact or RelatedPerson SHALL be copied in to Patient correspondence." />
    <purpose value="This extension extends the Patient and RelatedPerson resources, to support the exchange of information to indicate that a Patient contact or RelatedPerson SHALL be copied in to Patient correspondence. This is currently not supported by the FHIR standard." />
    <copyright value="Copyright &#169; 2021+ HL7 UK Licensed under the Apache License, Version 2.0 (the &quot;License&quot;); you may not use this file except in compliance with the License. You may obtain a copy of the License at  http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an &quot;AS IS&quot; BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. HL7&#174; FHIR&#174; standard Copyright &#169; 2011+ HL7 The HL7&#174; FHIR&#174; standard is used under the FHIR license. You may obtain a copy of the FHIR license at  https://www.hl7.org/fhir/license.html." />
    <fhirVersion value="4.0.1" />
    <mapping>
        <identity value="rim" />
        <uri value="http://hl7.org/v3" />
        <name value="RIM Mapping" />
    </mapping>
    <kind value="complex-type" />
    <abstract value="false" />
    <context>
        <type value="element" />
        <expression value="Patient.contact" />
    </context>
    <context>
        <type value="element" />
        <expression value="RelatedPerson" />
    </context>
    <type value="Extension" />
    <baseDefinition value="http://hl7.org/fhir/StructureDefinition/Extension" />
    <derivation value="constraint" />
    <differential>
        <element id="Extension">
            <path value="Extension" />
            <short value="Indicator showing that a patient&#39;s contact or related person SHALL be copied in to patient correspondence" />
            <definition value="Extension carrying a boolean indicator showing that a patient&#39;s contact or related person SHALL be copied in to patient correspondence." />
            <max value="1" />
        </element>
        <element id="Extension.url">
            <path value="Extension.url" />
            <fixedUri value="https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-CopyCorrespondenceIndicator" />
        </element>
        <element id="Extension.value[x]">
            <path value="Extension.value[x]" />
            <short value="Copy Correspondence Indicator" />
            <definition value="Boolean element representing Copy Correspondence Indicator." />
            <min value="1" />
            <type>
                <code value="boolean" />
            </type>
        </element>
    </differential>
</StructureDefinition>

JSON View

{
    "resourceType": "StructureDefinition",
    "id": "Extension-UKCore-CopyCorrespondenceIndicator",
    "url": "https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-CopyCorrespondenceIndicator",
    "version": "2.2.0",
    "name": "ExtensionUKCoreCopyCorrespondenceIndicator",
    "title": "Extension UK Core Copy Correspondence Indicator",
    "status": "active",
    "date": "2022-08-26",
    "publisher": "HL7 UK",
    "contact":  [
        {
            "name": "HL7 UK",
            "telecom":  [
                {
                    "system": "email",
                    "value": "ukcore@hl7.org.uk",
                    "use": "work",
                    "rank": 1
                }
            ]
        }
    ],
    "description": "Indicates that a Patient contact or RelatedPerson SHALL be copied in to Patient correspondence.",
    "purpose": "This extension extends the Patient and RelatedPerson resources, to support the exchange of information to indicate that a Patient contact or RelatedPerson SHALL be copied in to Patient correspondence. This is currently not supported by the FHIR standard.",
    "copyright": "Copyright © 2021+ HL7 UK Licensed under the Apache License, Version 2.0 (the \"License\"); you may not use this file except in compliance with the License. You may obtain a copy of the License at  http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an \"AS IS\" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. HL7® FHIR® standard Copyright © 2011+ HL7 The HL7® FHIR® standard is used under the FHIR license. You may obtain a copy of the FHIR license at  https://www.hl7.org/fhir/license.html.",
    "fhirVersion": "4.0.1",
    "mapping":  [
        {
            "identity": "rim",
            "uri": "http://hl7.org/v3",
            "name": "RIM Mapping"
        }
    ],
    "kind": "complex-type",
    "abstract": false,
    "context":  [
        {
            "type": "element",
            "expression": "Patient.contact"
        },
        {
            "type": "element",
            "expression": "RelatedPerson"
        }
    ],
    "type": "Extension",
    "baseDefinition": "http://hl7.org/fhir/StructureDefinition/Extension",
    "derivation": "constraint",
    "differential": {
        "element":  [
            {
                "id": "Extension",
                "path": "Extension",
                "short": "Indicator showing that a patient's contact or related person SHALL be copied in to patient correspondence",
                "definition": "Extension carrying a boolean indicator showing that a patient's contact or related person SHALL be copied in to patient correspondence.",
                "max": "1"
            },
            {
                "id": "Extension.url",
                "path": "Extension.url",
                "fixedUri": "https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-CopyCorrespondenceIndicator"
            },
            {
                "id": "Extension.value[x]",
                "path": "Extension.value[x]",
                "short": "Copy Correspondence Indicator",
                "definition": "Boolean element representing Copy Correspondence Indicator.",
                "min": 1,
                "type":  [
                    {
                        "code": "boolean"
                    }
                ]
            }
        ]
    }
}

StructureDefinition Extension-UKCore-DeathNotificationStatus

The patient's death notification status.

Purpose

This extension extends the Patient resource to support the exchange of the patient's death notification status, which is currently not supported by the FHIR standard.

Context of Use
Use on element Patient

Snapshot View

url1..1System.StringFixed Value
valueCodeableConceptCodeableConcept
url1..1System.StringFixed Value
valueDateTimedateTime
url1..1System.StringFixed Value

Differential View

url1..1System.StringFixed Value
valueCodeableConceptCodeableConcept
url1..1System.StringFixed Value
valueDateTimedateTime
url1..1System.StringFixed Value

Hybrid View

url1..1System.StringFixed Value
valueCodeableConceptCodeableConcept
url1..1System.StringFixed Value
valueDateTimedateTime
url1..1System.StringFixed Value

Table View

Extension..1
Extension.extension..
Extension.extension1..1
Extension.extension.url..
Extension.extension.value[x]CodeableConcept1..
Extension.extension..1
Extension.extension.url..
Extension.extension.value[x]dateTime1..
Extension.url..
Extension.value[x]..0


XML View

<StructureDefinition xmlns="http://hl7.org/fhir">
    <id value="Extension-UKCore-DeathNotificationStatus" />
    <url value="https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-DeathNotificationStatus" />
    <version value="2.1.0" />
    <name value="ExtensionUKCoreDeathNotificationStatus" />
    <title value="Extension UK Core Death Notification Status" />
    <status value="active" />
    <date value="2021-09-10" />
    <publisher value="HL7 UK" />
    <contact>
        <name value="HL7 UK" />
        <telecom>
            <system value="email" />
            <value value="ukcore@hl7.org.uk" />
            <use value="work" />
            <rank value="1" />
        </telecom>
    </contact>
    <description value="The patient&#39;s death notification status." />
    <purpose value="This extension extends the Patient resource to support the exchange of the patient&#39;s death notification status, which is currently not supported by the FHIR standard." />
    <copyright value="Copyright &#169; 2021+ HL7 UK Licensed under the Apache License, Version 2.0 (the &quot;License&quot;); you may not use this file except in compliance with the License. You may obtain a copy of the License at  http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an &quot;AS IS&quot; BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. HL7&#174; FHIR&#174; standard Copyright &#169; 2011+ HL7 The HL7&#174; FHIR&#174; standard is used under the FHIR license. You may obtain a copy of the FHIR license at  https://www.hl7.org/fhir/license.html." />
    <fhirVersion value="4.0.1" />
    <mapping>
        <identity value="rim" />
        <uri value="http://hl7.org/v3" />
        <name value="RIM Mapping" />
    </mapping>
    <kind value="complex-type" />
    <abstract value="false" />
    <context>
        <type value="element" />
        <expression value="Patient" />
    </context>
    <type value="Extension" />
    <baseDefinition value="http://hl7.org/fhir/StructureDefinition/Extension" />
    <derivation value="constraint" />
    <differential>
        <element id="Extension">
            <path value="Extension" />
            <short value="The patient&#39;s death notification status." />
            <definition value="The patient&#39;s death notification status." />
            <max value="1" />
        </element>
        <element id="Extension.extension">
            <path value="Extension.extension" />
            <slicing>
                <discriminator>
                    <type value="value" />
                    <path value="url" />
                </discriminator>
                <rules value="open" />
            </slicing>
        </element>
        <element id="Extension.extension:deathNotificationStatus">
            <path value="Extension.extension" />
            <sliceName value="deathNotificationStatus" />
            <short value="The patient&#39;s death notification status." />
            <definition value="The patient&#39;s death notification status." />
            <min value="1" />
            <max value="1" />
        </element>
        <element id="Extension.extension:deathNotificationStatus.url">
            <path value="Extension.extension.url" />
            <fixedUri value="deathNotificationStatus" />
        </element>
        <element id="Extension.extension:deathNotificationStatus.value[x]">
            <path value="Extension.extension.value[x]" />
            <short value="The patient&#39;s death notification status." />
            <definition value="The patient&#39;s death notification status." />
            <min value="1" />
            <type>
                <code value="CodeableConcept" />
            </type>
            <binding>
                <strength value="extensible" />
                <valueSet value="https://fhir.hl7.org.uk/ValueSet/UKCore-DeathNotificationStatus" />
            </binding>
        </element>
        <element id="Extension.extension:systemEffectiveDate">
            <path value="Extension.extension" />
            <sliceName value="systemEffectiveDate" />
            <short value="System effective date for patient&#39;s death notification status." />
            <definition value="System effective date for patient&#39;s death notification status." />
            <max value="1" />
        </element>
        <element id="Extension.extension:systemEffectiveDate.url">
            <path value="Extension.extension.url" />
            <fixedUri value="systemEffectiveDate" />
        </element>
        <element id="Extension.extension:systemEffectiveDate.value[x]">
            <path value="Extension.extension.value[x]" />
            <short value="System effective date for patient&#39;s death notification status." />
            <definition value="System effective date for patient&#39;s death notification status." />
            <min value="1" />
            <type>
                <code value="dateTime" />
            </type>
        </element>
        <element id="Extension.url">
            <path value="Extension.url" />
            <fixedUri value="https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-DeathNotificationStatus" />
        </element>
        <element id="Extension.value[x]">
            <path value="Extension.value[x]" />
            <max value="0" />
        </element>
    </differential>
</StructureDefinition>

JSON View

{
    "resourceType": "StructureDefinition",
    "id": "Extension-UKCore-DeathNotificationStatus",
    "url": "https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-DeathNotificationStatus",
    "version": "2.1.0",
    "name": "ExtensionUKCoreDeathNotificationStatus",
    "title": "Extension UK Core Death Notification Status",
    "status": "active",
    "date": "2021-09-10",
    "publisher": "HL7 UK",
    "contact":  [
        {
            "name": "HL7 UK",
            "telecom":  [
                {
                    "system": "email",
                    "value": "ukcore@hl7.org.uk",
                    "use": "work",
                    "rank": 1
                }
            ]
        }
    ],
    "description": "The patient's death notification status.",
    "purpose": "This extension extends the Patient resource to support the exchange of the patient's death notification status, which is currently not supported by the FHIR standard.",
    "copyright": "Copyright © 2021+ HL7 UK Licensed under the Apache License, Version 2.0 (the \"License\"); you may not use this file except in compliance with the License. You may obtain a copy of the License at  http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an \"AS IS\" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. HL7® FHIR® standard Copyright © 2011+ HL7 The HL7® FHIR® standard is used under the FHIR license. You may obtain a copy of the FHIR license at  https://www.hl7.org/fhir/license.html.",
    "fhirVersion": "4.0.1",
    "mapping":  [
        {
            "identity": "rim",
            "uri": "http://hl7.org/v3",
            "name": "RIM Mapping"
        }
    ],
    "kind": "complex-type",
    "abstract": false,
    "context":  [
        {
            "type": "element",
            "expression": "Patient"
        }
    ],
    "type": "Extension",
    "baseDefinition": "http://hl7.org/fhir/StructureDefinition/Extension",
    "derivation": "constraint",
    "differential": {
        "element":  [
            {
                "id": "Extension",
                "path": "Extension",
                "short": "The patient's death notification status.",
                "definition": "The patient's death notification status.",
                "max": "1"
            },
            {
                "id": "Extension.extension",
                "path": "Extension.extension",
                "slicing": {
                    "discriminator":  [
                        {
                            "type": "value",
                            "path": "url"
                        }
                    ],
                    "rules": "open"
                }
            },
            {
                "id": "Extension.extension:deathNotificationStatus",
                "path": "Extension.extension",
                "sliceName": "deathNotificationStatus",
                "short": "The patient's death notification status.",
                "definition": "The patient's death notification status.",
                "min": 1,
                "max": "1"
            },
            {
                "id": "Extension.extension:deathNotificationStatus.url",
                "path": "Extension.extension.url",
                "fixedUri": "deathNotificationStatus"
            },
            {
                "id": "Extension.extension:deathNotificationStatus.value[x]",
                "path": "Extension.extension.value[x]",
                "short": "The patient's death notification status.",
                "definition": "The patient's death notification status.",
                "min": 1,
                "type":  [
                    {
                        "code": "CodeableConcept"
                    }
                ],
                "binding": {
                    "strength": "extensible",
                    "valueSet": "https://fhir.hl7.org.uk/ValueSet/UKCore-DeathNotificationStatus"
                }
            },
            {
                "id": "Extension.extension:systemEffectiveDate",
                "path": "Extension.extension",
                "sliceName": "systemEffectiveDate",
                "short": "System effective date for patient's death notification status.",
                "definition": "System effective date for patient's death notification status.",
                "max": "1"
            },
            {
                "id": "Extension.extension:systemEffectiveDate.url",
                "path": "Extension.extension.url",
                "fixedUri": "systemEffectiveDate"
            },
            {
                "id": "Extension.extension:systemEffectiveDate.value[x]",
                "path": "Extension.extension.value[x]",
                "short": "System effective date for patient's death notification status.",
                "definition": "System effective date for patient's death notification status.",
                "min": 1,
                "type":  [
                    {
                        "code": "dateTime"
                    }
                ]
            },
            {
                "id": "Extension.url",
                "path": "Extension.url",
                "fixedUri": "https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-DeathNotificationStatus"
            },
            {
                "id": "Extension.value[x]",
                "path": "Extension.value[x]",
                "max": "0"
            }
        ]
    }
}

StructureDefinition Extension-UKCore-EthnicCategory

Information that describes the patient's ethnic category.

Purpose

This extension extends the Patient resource to support the exchange of ethnic category information, as a Codeable Concept, which is currently not supported by the FHIR standard.

Context of Use
Use on element Patient

Snapshot View

url1..1System.StringFixed Value
valueCodeableConceptCodeableConcept

Differential View

url1..1System.StringFixed Value
valueCodeableConceptCodeableConcept

Hybrid View

url1..1System.StringFixed Value
valueCodeableConceptCodeableConcept

Table View

Extension..
Extension.url..
Extension.value[x]CodeableConcept1..


XML View

<StructureDefinition xmlns="http://hl7.org/fhir">
    <id value="Extension-UKCore-EthnicCategory" />
    <url value="https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-EthnicCategory" />
    <version value="2.2.0" />
    <name value="ExtensionUKCoreEthnicCategory" />
    <title value="Extension UK Core Ethnic Category" />
    <status value="active" />
    <date value="2022-01-07" />
    <publisher value="HL7 UK" />
    <contact>
        <name value="HL7 UK" />
        <telecom>
            <system value="email" />
            <value value="ukcore@hl7.org.uk" />
            <use value="work" />
            <rank value="1" />
        </telecom>
    </contact>
    <description value="Information that describes the patient&#39;s ethnic category." />
    <purpose value="This extension extends the Patient resource to support the exchange of ethnic category information, as a Codeable Concept, which is currently not supported by the FHIR standard." />
    <copyright value="Copyright &#169; 2021+ HL7 UK Licensed under the Apache License, Version 2.0 (the &quot;License&quot;); you may not use this file except in compliance with the License. You may obtain a copy of the License at  http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an &quot;AS IS&quot; BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. HL7&#174; FHIR&#174; standard Copyright &#169; 2011+ HL7 The HL7&#174; FHIR&#174; standard is used under the FHIR license. You may obtain a copy of the FHIR license at  https://www.hl7.org/fhir/license.html." />
    <fhirVersion value="4.0.1" />
    <mapping>
        <identity value="rim" />
        <uri value="http://hl7.org/v3" />
        <name value="RIM Mapping" />
    </mapping>
    <kind value="complex-type" />
    <abstract value="false" />
    <context>
        <type value="element" />
        <expression value="Patient" />
    </context>
    <type value="Extension" />
    <baseDefinition value="http://hl7.org/fhir/StructureDefinition/Extension" />
    <derivation value="constraint" />
    <differential>
        <element id="Extension">
            <path value="Extension" />
            <short value="Ethnic category" />
            <definition value="The ethnicity of the subject." />
        </element>
        <element id="Extension.url">
            <path value="Extension.url" />
            <fixedUri value="https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-EthnicCategory" />
        </element>
        <element id="Extension.value[x]">
            <path value="Extension.value[x]" />
            <short value="A code classifying the person&#39;s ethnicity" />
            <definition value="A code classifying the person&#39;s ethnicity." />
            <min value="1" />
            <type>
                <code value="CodeableConcept" />
            </type>
            <binding>
                <strength value="preferred" />
                <description value="A set of codes that define the ethnicity of a person, as specified by the person." />
                <valueSet value="https://fhir.hl7.org.uk/ValueSet/UKCore-EthnicCategory" />
            </binding>
        </element>
    </differential>
</StructureDefinition>

JSON View

{
    "resourceType": "StructureDefinition",
    "id": "Extension-UKCore-EthnicCategory",
    "url": "https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-EthnicCategory",
    "version": "2.2.0",
    "name": "ExtensionUKCoreEthnicCategory",
    "title": "Extension UK Core Ethnic Category",
    "status": "active",
    "date": "2022-01-07",
    "publisher": "HL7 UK",
    "contact":  [
        {
            "name": "HL7 UK",
            "telecom":  [
                {
                    "system": "email",
                    "value": "ukcore@hl7.org.uk",
                    "use": "work",
                    "rank": 1
                }
            ]
        }
    ],
    "description": "Information that describes the patient's ethnic category.",
    "purpose": "This extension extends the Patient resource to support the exchange of ethnic category information, as a Codeable Concept, which is currently not supported by the FHIR standard.",
    "copyright": "Copyright © 2021+ HL7 UK Licensed under the Apache License, Version 2.0 (the \"License\"); you may not use this file except in compliance with the License. You may obtain a copy of the License at  http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an \"AS IS\" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. HL7® FHIR® standard Copyright © 2011+ HL7 The HL7® FHIR® standard is used under the FHIR license. You may obtain a copy of the FHIR license at  https://www.hl7.org/fhir/license.html.",
    "fhirVersion": "4.0.1",
    "mapping":  [
        {
            "identity": "rim",
            "uri": "http://hl7.org/v3",
            "name": "RIM Mapping"
        }
    ],
    "kind": "complex-type",
    "abstract": false,
    "context":  [
        {
            "type": "element",
            "expression": "Patient"
        }
    ],
    "type": "Extension",
    "baseDefinition": "http://hl7.org/fhir/StructureDefinition/Extension",
    "derivation": "constraint",
    "differential": {
        "element":  [
            {
                "id": "Extension",
                "path": "Extension",
                "short": "Ethnic category",
                "definition": "The ethnicity of the subject."
            },
            {
                "id": "Extension.url",
                "path": "Extension.url",
                "fixedUri": "https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-EthnicCategory"
            },
            {
                "id": "Extension.value[x]",
                "path": "Extension.value[x]",
                "short": "A code classifying the person's ethnicity",
                "definition": "A code classifying the person's ethnicity.",
                "min": 1,
                "type":  [
                    {
                        "code": "CodeableConcept"
                    }
                ],
                "binding": {
                    "strength": "preferred",
                    "description": "A set of codes that define the ethnicity of a person, as specified by the person.",
                    "valueSet": "https://fhir.hl7.org.uk/ValueSet/UKCore-EthnicCategory"
                }
            }
        ]
    }
}

Examples

Richard Smith - An example to illustrate patient Ethnic Category information.
Example UKCore-Patient-Extension-EthnicCategory

StructureDefinition Extension-UKCore-Evidence

A reference to results of investigations that confirmed the certainty of the diagnosis. Examples might include results of skin prick allergy tests.

Purpose

This extension extends the AllergyIntolerance resource to support the exchange of information describing the reference to results of investigations that confirmed the certainty of the diagnosis, which is currently not supported by the FHIR standard.

Guidance

An optional extension for a reference to a DiagnosticReport resource to share the results of investigations that confirmed the certainty of the allergy or intolerance diagnosis.

Context of Use
Use on element AllergyIntolerance

Snapshot View

url1..1System.StringFixed Value
referenceΣ I0..1string
typeΣ0..1uriBinding
useΣ ?!0..1codeBinding
typeΣ0..1CodeableConceptBinding
systemΣ0..1uri
valueΣ0..1string
periodΣ I0..1Period
assignerΣ I0..1Reference(UK Core Organization)
displayΣ0..1string
valueReferenceReference(DiagnosticReport)

Differential View

url1..1System.StringFixed Value