| Extension | I | | Extension | There are no (further) constraints on this element Element idShort description Optional Extensions Element Definition Optional Extension Element - found in all resources.
Extension Constraints- ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) - ext-1: Must have either extensions or value[x], not both
extension.exists() != value.exists()
|
| id | | 0..1 | string | There are no (further) constraints on this element Element idShort description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
string Mappings |
| extension | I | 0..* | Extension | There are no (further) constraints on this element Element idShort description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints- ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) - ext-1: Must have either extensions or value[x], not both
extension.exists() != value.exists()
|
| url | | 1..1 | uriFixed Value | Element idShort description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL.
The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
uri Fixed value https://demis.rki.de/fhir/StructureDefinition/Salutation |
| value[x] | S | 1..1 | Binding | Element idShort description Anrede des Melders Definition Anrede des Melders. Der Wert muss entsprechend des vom RKI definierten ValueSets (https://demis.rki.de/fhir/ValueSet/salutation) im coding Element dargestellt werden.
Salutation (required) Constraints- ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
|
| valueCoding | | | Coding | Data type Coding |
| id | | 0..1 | string | There are no (further) constraints on this element Element idShort description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
string Mappings |
| extension | I | 0..* | Extension | There are no (further) constraints on this element Element idExtension.value[x].extension Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints- ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) - ext-1: Must have either extensions or value[x], not both
extension.exists() != value.exists()
|
| system | S Σ | 1..1 | uri | There are no (further) constraints on this element Element idExtension.value[x].system Identity of the terminology system Definition The identification of the code system that defines the meaning of the symbol in the code.
Need to be unambiguous about the source of the definition of the symbol.
The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously.
uri Constraints- ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
- rim: n/a
- v2: C*E.3
- rim: ./codeSystem
- orim: fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem
|
| version | Σ | 0..1 | string | There are no (further) constraints on this element Element idExtension.value[x].version Version of the system - if relevant Definition The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.
Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.
string Constraints- ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
- rim: n/a
- v2: C*E.7
- rim: ./codeSystemVersion
- orim: fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion
|
| code | S Σ | 1..1 | code | There are no (further) constraints on this element Element idShort description Symbol in syntax defined by the system Definition A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).
Need to refer to a particular code in the system.
Note that FHIR strings SHALL NOT exceed 1MB in size
code Constraints- ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
- rim: n/a
- v2: C*E.1
- rim: ./code
- orim: fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code
|
| display | Σ | 0..1 | string | There are no (further) constraints on this element Element idExtension.value[x].display Representation defined by the system Definition A representation of the meaning of the code in the system, following the rules of the system.
Need to be able to carry a human-readable meaning of the code for readers that do not know the system.
Note that FHIR strings SHALL NOT exceed 1MB in size
string Constraints- ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
- rim: n/a
- v2: C*E.2 - but note this is not well followed
- rim: CV.displayName
- orim: fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName
|
| userSelected | Σ | 0..1 | boolean | There are no (further) constraints on this element Element idExtension.value[x].userSelected If this coding was chosen directly by the user Definition Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).
This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.
Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.
boolean Constraints- ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
- rim: n/a
- v2: Sometimes implied by being first
- rim: CD.codingRationale
- orim: fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]
|