| DutyHoursAvailability (Extension) | C | | Extension | Element idExtension Short descriptionDienstzeiten DefinitionErreichbarkeit der Dienstleistung anhand der Dienstzeiten
Extension ConditionsThe cardinality or value of this element may be affected by these constraints: ele-1 Constraints- ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) - ext-1: Must have either extensions or value[x], not both
extension.exists() != value.exists()
Mappings |
| id | | 0..1 | string | There are no (further) constraints on this element Element idExtension.id Short descriptionUnique id for inter-element referencing DefinitionUnique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
string Mappings |
| extension | C | 0..0 | Extension | There are no (further) constraints on this element Element idExtension.extension Short descriptionAdditional content defined by implementations Alternate namesextensions, user content DefinitionMay be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Extension SlicingUnordered, Open, by url(Value) Extensions are always sliced by (at least) url ConditionsThe cardinality or value of this element may be affected by these constraints: ele-1 Constraints- ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) - ext-1: Must have either extensions or value[x], not both
extension.exists() != value.exists()
Mappings |
| url | | 1..1 | uriFixed Value | Element idExtension.url Short descriptionidentifies the meaning of the extension DefinitionSource of the definition for the extension code - a logical name or a URL.
The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
uri Fixed valuehttps://emiga.rki.de/fhir/vzd/Extension/DutyHoursAvailability Mappings |
| value[x] | S | 1..1 | CodingBinding | Element idExtension.value[x] Short descriptionValue of extension DefinitionValue of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Coding BindingHealthcareServiceDutyHours (required) ConditionsThe cardinality or value of this element may be affected by these constraints: ele-1 Constraints- ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
Mappings |
| id | | 0..1 | string | There are no (further) constraints on this element Element idExtension.value[x].id Short descriptionUnique id for inter-element referencing DefinitionUnique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
string Mappings |
| extension | C | 0..* | Extension | There are no (further) constraints on this element Element idExtension.value[x].extension Short descriptionAdditional content defined by implementations Alternate namesextensions, user content DefinitionMay be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Extension SlicingUnordered, Open, by url(Value) Extensions are always sliced by (at least) url ConditionsThe cardinality or value of this element may be affected by these constraints: ele-1 Constraints- ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) - ext-1: Must have either extensions or value[x], not both
extension.exists() != value.exists()
Mappings |
| system | S Σ | 1..1 | uriPattern | Element idExtension.value[x].system Short descriptionIdentity of the terminology system DefinitionThe identification of the code system that defines the meaning of the symbol in the code.
Need to be unambiguous about the source of the definition of the symbol.
The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously.
uri ConditionsThe cardinality or value of this element may be affected by these constraints: ele-1 Constraints- ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
Patternhttps://emiga.rki.de/fhir/vzd/CodeSystem/HealthcareServiceDutyHours Mappings- rim: n/a
- v2: C*E.3
- rim: ./codeSystem
- orim: fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem
|
| version | Σ | 0..1 | string | There are no (further) constraints on this element Element idExtension.value[x].version Short descriptionVersion of the system - if relevant DefinitionThe version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.
Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.
string ConditionsThe cardinality or value of this element may be affected by these constraints: ele-1 Constraints- ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
Mappings- rim: n/a
- v2: C*E.7
- rim: ./codeSystemVersion
- orim: fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion
|
| code | S Σ | 1..1 | code | There are no (further) constraints on this element Element idExtension.value[x].code Short descriptionSymbol in syntax defined by the system DefinitionA symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).
Need to refer to a particular code in the system.
Note that FHIR strings SHALL NOT exceed 1MB in size
code ConditionsThe cardinality or value of this element may be affected by these constraints: ele-1 Constraints- ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
Mappings- rim: n/a
- v2: C*E.1
- rim: ./code
- orim: fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code
|
| display | Σ | 0..1 | string | There are no (further) constraints on this element Element idExtension.value[x].display Short descriptionRepresentation defined by the system DefinitionA representation of the meaning of the code in the system, following the rules of the system.
Need to be able to carry a human-readable meaning of the code for readers that do not know the system.
Note that FHIR strings SHALL NOT exceed 1MB in size
string ConditionsThe cardinality or value of this element may be affected by these constraints: ele-1 Constraints- ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
Mappings- rim: n/a
- v2: C*E.2 - but note this is not well followed
- rim: CV.displayName
- orim: fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName
|
| userSelected | Σ | 0..1 | boolean | There are no (further) constraints on this element Element idExtension.value[x].userSelected Short descriptionIf this coding was chosen directly by the user DefinitionIndicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).
This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.
Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.
boolean ConditionsThe cardinality or value of this element may be affected by these constraints: ele-1 Constraints- ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
Mappings- rim: n/a
- v2: Sometimes implied by being first
- rim: CD.codingRationale
- orim: fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]
|