Wales FHIR Implementation Guide

DataStandardsWales-Location

Overview

The Location resource contains information about a physical place where services are provided and resources and participants may be stored, found, contained, or accommodated. Typical examples include buildings, wards, corridors, rooms or beds, but may also include mobile clinics, a vehicle or lift, or a patient's home.

The DataStandardsWales-Location profile is derived from the UK Core Location Profile. It defines additional rules for use within health and care organisations in Wales. Further guidance on the use of the Location resource along with other administrative FHIR resources is provided within the guidance section of this guide.

A direct link to the Data Standards Wales asset can be accessed here - Data Standards Wales Location

Formal Views of Profile Content

Snapshot View
Differential View
Hybrid View
Examples

Location	I		Location	There are no (further) constraints on this element Element id Location Short description Details and position information for a physical place Definition Details and position information for a physical place where services are provided and resources and participants may be stored, found, contained, or accommodated. Data type Location Constraints dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources `contained.contained.empty()` dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated `contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()` dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource `contained.where((('#'+id in (%resource.descendants().reference \| %resource.descendants().as(canonical) \| %resource.descendants().as(uri) \| %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty()` dom-6: A resource should have narrative for robust management text.`div`.exists() dom-5: If a resource is contained in another resource, it SHALL NOT have a security label `contained.meta.security.empty()` Mappings rim: Entity. Role, or Act rim: .Role[classCode=SDLC]
id	Σ	0..1	string	There are no (further) constraints on this element Element id Location.id Short description Logical id of this artifact Definition The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes. Comments The only time that a resource does not have an id is when it is being submitted to the server using a create operation. Data type string
meta	Σ	0..1	Meta	There are no (further) constraints on this element Element id Location.meta Short description Metadata about the resource Definition The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource. Data type Meta Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: N/A
implicitRules	Σ ?!	0..1	uri	There are no (further) constraints on this element Element id Location.implicitRules Short description A set of rules under which this content was created Definition A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc. Comments Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
language		0..1	codeBinding	There are no (further) constraints on this element Element id Location.language Short description Language of the resource content Definition The base language in which the resource is written. Comments Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute). Data type code Binding A human language. CommonLanguages (preferred) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
text		0..1	Narrative	There are no (further) constraints on this element Element id Location.text Short description Text summary of the resource, for human interpretation Alternate names narrative, html, xhtml, display Definition A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety. Comments Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later. Data type Narrative Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: N/A rim: Act.text?
contained		0..*	Resource	There are no (further) constraints on this element Element id Location.contained Short description Contained, inline Resources Alternate names inline resources, anonymous resources, contained resources Definition These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope. Comments This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels. Data type Resource Mappings rim: Entity. Role, or Act rim: N/A
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Location.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	?! I	0..*	Extension	There are no (further) constraints on this element Element id Location.modifierExtension Short description Extensions that cannot be ignored Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
identifier	S Σ	0..*	Identifier	Element id Location.identifier Short description Unique code or number identifying the location to its users Definition Unique code or number identifying the location to its users. Requirements Different location identities will apply which are managed by different registries Comments Identifiers for the location SHOULD be populated if the data exists Data type Identifier Sliced: Unordered, Open, by system(Value) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: CX / EI (occasionally, more often EI maps to a resource id or a URL) rim: II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd: Identifier w5: FiveWs.identifier rim: .id
odsSiteCode	Σ	0..0	Identifier	There are no (further) constraints on this element Element id Location.identifier:odsSiteCode Short description ODS Site code to identify the organisation at site level Definition ODS Site code to identify the organisation at site level. Requirements Organization label locations in registries, need to keep track of those. Data type Identifier Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: CX / EI (occasionally, more often EI maps to a resource id or a URL) rim: II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd: Identifier w5: FiveWs.identifier rim: .id
wrtsLocationIdentifier	Σ	0..1	Identifier	Element id Location.identifier:wrtsLocationIdentifier Short description The WRTS identifier for the location Definition The Welsh Reference Data Servcie identifier for the location Requirements Organization label locations in registries, need to keep track of those. Data type Identifier Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: CX / EI (occasionally, more often EI maps to a resource id or a URL) rim: II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd: Identifier w5: FiveWs.identifier rim: .id
id		0..1	string	There are no (further) constraints on this element Element id Location.identifier:wrtsLocationIdentifier.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Location.identifier:wrtsLocationIdentifier.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
use	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element id Location.identifier:wrtsLocationIdentifier.use Short description usual \| official \| temp \| secondary \| old (If known) Definition The purpose of this identifier. Requirements Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. Comments Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. Data type code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: N/A rim: Role.code or implied by context
type	Σ	0..1	CodeableConceptBinding	There are no (further) constraints on this element Element id Location.identifier:wrtsLocationIdentifier.type Short description Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. Requirements Allows users to make use of identifiers when the identifier system is not known. Comments This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. Data type CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD v2: CX.5 rim: Role.code or implied by context
system	Σ	1..1	uriFixed Value	Element id Location.identifier:wrtsLocationIdentifier.system Short description WRTS location identifier Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique. Requirements There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. Comments Identifier.system is always case sensitive. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Fixed value https://fhir.nhs.wales/Id/wrts-location-identifier Mappings rim: n/a v2: CX.4 / EI-2-4 rim: II.root or Role.id.root servd: ./IdentifierType
value	Σ	1..1	string	There are no (further) constraints on this element Element id Location.identifier:wrtsLocationIdentifier.value Short description The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system. Comments If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General 123456 Mappings rim: n/a v2: CX.1 / EI.1 rim: II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd: ./Value
period	Σ I	0..1	Period	There are no (further) constraints on this element Element id Location.identifier:wrtsLocationIdentifier.period Short description Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use. Comments A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration. Data type Period Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` per-1: If present, start SHALL have a lower value than end `start.hasValue().not() or end.hasValue().not() or (start <= end)` Mappings rim: n/a v2: DR rim: IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"] v2: CX.7 + CX.8 rim: Role.effectiveTime or implied by context servd: ./StartDate and ./EndDate
assigner	Σ I	0..1	Reference(Organization)	There are no (further) constraints on this element Element id Location.identifier:wrtsLocationIdentifier.assigner Short description Organization that issued id (may be just text) Definition Organization that issued/manages the identifier. Comments The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. Data type Reference(Organization) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2: CX.4 / (CX.4,CX.9,CX.10) rim: II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd: ./IdentifierIssuingAuthority
status	S Σ ?!	0..1	codeBinding	Element id Location.status Short description active \| suspended \| inactive Definition The status property covers the general availability of the resource, not the current value which may be covered by the operationStatus, or by a schedule/slots if they are configured for the location. Comments The status of the location (i.e., whether it is active, suspended or inactive) SHOULD be populated if the data exists. Data type code Binding Indicates whether the location is still in use. LocationStatus (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a w5: FiveWs.status rim: .statusCode
operationalStatus	Σ	0..1	CodingBinding	There are no (further) constraints on this element Element id Location.operationalStatus Short description The operational status of the location (typically only for a bed/room) Definition The operational status covers operation values most relevant to beds (but can also apply to rooms/units/chairs/etc. such as an isolation unit/dialysis chair). This typically covers concepts such as contamination, housekeeping, and other activities like maintenance. Comments Codes may be defined very casually in enumerations or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Data type Coding Binding The operational status if the location (where typically a bed/room). v2.0116 (preferred) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim: CV orim: fhir:Coding rdfs:subClassOf dt:CDCoding w5: FiveWs.status
name	S Σ	1..1	string	Element id Location.name Short description Name of the location as used by humans Definition Name of the location as used by humans. Does not need to be unique. Comments Location name SHALL be populated. If the name of a location changes, consider putting the old name in the alias column so that it can still be located through searches. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: .name
alias		0..*	string	There are no (further) constraints on this element Element id Location.alias Short description A list of alternate names that the location is known as, or was known as, in the past Definition A list of alternate names that the location is known as, or was known as, in the past. Requirements Over time locations and organizations go through many changes and can be known by different names. For searching knowing previous names that the location was known by can be very useful. Comments There are no dates associated with the alias/historic names, as this is not intended to track when names were used, but to assist in searching so that older names can still result in identifying the location. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: .name
description	Σ	0..1	string	There are no (further) constraints on this element Element id Location.description Short description Additional details about the location that could be displayed as further information to identify the location beyond its name Definition Description of the Location, which helps in finding or referencing the place. Requirements Humans need additional information to verify a correct location has been identified. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: .playingEntity[classCode=PLC determinerCode=INSTANCE].desc
mode	Σ	0..1	codeBinding	There are no (further) constraints on this element Element id Location.mode Short description instance \| kind Definition Indicates whether a resource instance represents a specific location or a class of locations. Requirements When using a Location resource for scheduling or orders, we need to be able to refer to a class of Locations instead of a specific Location. Comments This is labeled as a modifier because whether or not the location is a class of locations changes how it can be used and understood. Data type code Binding Indicates whether a resource instance represents a specific location or a class of locations. LocationMode (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a w5: FiveWs.class rim: .playingEntity[classCode=PLC].determinerCode
type	Σ	0..*	CodeableConceptBinding	There are no (further) constraints on this element Element id Location.type Short description Type of function performed Definition Indicates the type of function performed at the location. Comments Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination. Data type CodeableConcept Binding Indicates the type of function performed at the location. v3.ServiceDeliveryLocationRoleType (extensible) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD w5: FiveWs.class rim: .code
telecom	I	0..*	ContactPoint	There are no (further) constraints on this element Element id Location.telecom Short description Contact details of the location Definition The contact details of communication devices available at the location. This can include phone numbers, fax numbers, mobile numbers, email addresses and web sites. Data type ContactPoint Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` cpt-2: A system is required if a value is provided. `value.empty() or system.exists()` Mappings rim: n/a v2: XTN rim: TEL servd: ContactPoint rim: .telecom
address	S	0..1	Address	There are no (further) constraints on this element Element id Location.address Short description Physical location Definition Physical location. Requirements If locations can be visited, we need to keep track of their address. Comments Additional addresses should be recorded using another instance of the Location resource, or via the Organization. Data type Address Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: XAD rim: AD servd: Address rim: .addr
physicalType	Σ	0..1	CodeableConcept	There are no (further) constraints on this element Element id Location.physicalType Short description Physical form of the location Definition Physical form of the location, e.g. building, room, vehicle, road. Requirements For purposes of showing relevant locations in queries, we need to categorize locations. Comments Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination. Data type CodeableConcept Binding Physical form of the location. LocationType (example) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD w5: FiveWs.class rim: .playingEntity [classCode=PLC].code
position		0..1	BackboneElement	There are no (further) constraints on this element Element id Location.position Short description The absolute geographic location Definition The absolute geographic location of the Location, expressed using the WGS84 datum (This is the same co-ordinate system used in KML). Requirements For mobile applications and automated route-finding knowing the exact location of the Location is required. Data type BackboneElement Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: .playingEntity [classCode=PLC determinerCode=INSTANCE].positionText
id		0..1	string	There are no (further) constraints on this element Element id Location.position.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Location.position.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id Location.position.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
longitude		1..1	decimal	There are no (further) constraints on this element Element id Location.position.longitude Short description Longitude with WGS84 datum Definition Longitude. The value domain and the interpretation are the same as for the text of the longitude element in KML (see notes below). Comments Do not use an IEEE type floating point type, instead use something that works like a true decimal, with inbuilt precision (e.g. Java BigInteger) Data type decimal Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: (RIM Opted not to map the sub-elements of GPS location, is now an OBS)
latitude		1..1	decimal	There are no (further) constraints on this element Element id Location.position.latitude Short description Latitude with WGS84 datum Definition Latitude. The value domain and the interpretation are the same as for the text of the latitude element in KML (see notes below). Comments Do not use an IEEE type floating point type, instead use something that works like a true decimal, with inbuilt precision (e.g. Java BigInteger) Data type decimal Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: (RIM Opted not to map the sub-elements of GPS location, is now an OBS)
altitude		0..1	decimal	There are no (further) constraints on this element Element id Location.position.altitude Short description Altitude with WGS84 datum Definition Altitude. The value domain and the interpretation are the same as for the text of the altitude element in KML (see notes below). Comments Do not use an IEEE type floating point type, instead use something that works like a true decimal, with inbuilt precision (e.g. Java BigInteger) Data type decimal Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: (RIM Opted not to map the sub-elements of GPS location, is now an OBS)
managingOrganization	S Σ I	0..1	Reference(Data Standards Wales Organization)	Element id Location.managingOrganization Short description Organization responsible for provisioning and upkeep Definition The organization responsible for the provisioning and upkeep of the location. Requirements Need to know who manages the location. Comments This can also be used as the part of the organization hierarchy where this location provides services. These services can be defined through the HealthcareService resource. Data type Reference(Data Standards Wales Organization) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity) rim: .scopingEntity[classCode=ORG determinerKind=INSTANCE]
id		0..1	string	There are no (further) constraints on this element Element id Location.managingOrganization.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Location.managingOrganization.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
reference	Σ I	0..1	string	There are no (further) constraints on this element Element id Location.managingOrganization.reference Short description Literal reference, Relative, internal or absolute URL Definition A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources. Comments Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: N/A
type	Σ	0..1	uriBinding	There are no (further) constraints on this element Element id Location.managingOrganization.type Short description Type the reference refers to (e.g. "Patient") Definition The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent. The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources). Comments This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified. Data type uri Binding Aa resource (or, for logical models, the URI of the logical model). ResourceType (extensible) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: N/A
identifier	Σ	0..1	Identifier	There are no (further) constraints on this element Element id Location.managingOrganization.identifier Short description Logical reference, when literal reference is not known Definition An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference. Comments When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it. Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation\|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any). Data type Identifier Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: CX / EI (occasionally, more often EI maps to a resource id or a URL) rim: II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd: Identifier rim: .identifier
id		0..1	string	There are no (further) constraints on this element Element id Location.managingOrganization.identifier.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Location.managingOrganization.identifier.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
use	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element id Location.managingOrganization.identifier.use Short description usual \| official \| temp \| secondary \| old (If known) Definition The purpose of this identifier. Requirements Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. Comments Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. Data type code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: N/A rim: Role.code or implied by context
type	Σ	0..1	CodeableConceptBinding	There are no (further) constraints on this element Element id Location.managingOrganization.identifier.type Short description Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. Requirements Allows users to make use of identifiers when the identifier system is not known. Comments This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. Data type CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD v2: CX.5 rim: Role.code or implied by context
system	Σ	1..1	uri	There are no (further) constraints on this element Element id Location.managingOrganization.identifier.system Short description The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique. Requirements There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. Comments Identifier.system is always case sensitive. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General http://www.acme.com/identifiers/patient Mappings rim: n/a v2: CX.4 / EI-2-4 rim: II.root or Role.id.root servd: ./IdentifierType
value	Σ	1..1	string	There are no (further) constraints on this element Element id Location.managingOrganization.identifier.value Short description The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system. Comments If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General 123456 Mappings rim: n/a v2: CX.1 / EI.1 rim: II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd: ./Value
period	Σ I	0..1	Period	There are no (further) constraints on this element Element id Location.managingOrganization.identifier.period Short description Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use. Comments A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration. Data type Period Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` per-1: If present, start SHALL have a lower value than end `start.hasValue().not() or end.hasValue().not() or (start <= end)` Mappings rim: n/a v2: DR rim: IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"] v2: CX.7 + CX.8 rim: Role.effectiveTime or implied by context servd: ./StartDate and ./EndDate
assigner	Σ I	0..1	Reference(UK Core Organization)	There are no (further) constraints on this element Element id Location.managingOrganization.identifier.assigner Short description Organization that issued id (may be just text) Definition Organization that issued/manages the identifier. Comments The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. Data type Reference(UK Core Organization) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2: CX.4 / (CX.4,CX.9,CX.10) rim: II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd: ./IdentifierIssuingAuthority
display	Σ	0..1	string	There are no (further) constraints on this element Element id Location.managingOrganization.display Short description Text alternative for the resource Definition Plain text narrative that identifies the resource in addition to the resource reference. Comments This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: N/A
partOf	S I	0..1	Reference(Data Standards Wales Location)	Element id Location.partOf Short description Another Location this one is physically a part of Definition Another Location of which this Location is physically a part of. Requirements For purposes of location, display and identification, knowing which locations are located within other locations is important. Comments References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository. Data type Reference(Data Standards Wales Location) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity) rim: .inboundLink[typeCode=PART].source[classCode=SDLC]
id		0..1	string	There are no (further) constraints on this element Element id Location.partOf.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Location.partOf.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
reference	Σ I	0..1	string	There are no (further) constraints on this element Element id Location.partOf.reference Short description Literal reference, Relative, internal or absolute URL Definition A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources. Comments Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: N/A
type	Σ	0..1	uriBinding	There are no (further) constraints on this element Element id Location.partOf.type Short description Type the reference refers to (e.g. "Patient") Definition The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent. The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources). Comments This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified. Data type uri Binding Aa resource (or, for logical models, the URI of the logical model). ResourceType (extensible) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: N/A
identifier	Σ	0..1	Identifier	There are no (further) constraints on this element Element id Location.partOf.identifier Short description Logical reference, when literal reference is not known Definition An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference. Comments When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it. Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation\|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any). Data type Identifier Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: CX / EI (occasionally, more often EI maps to a resource id or a URL) rim: II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd: Identifier rim: .identifier
id		0..1	string	There are no (further) constraints on this element Element id Location.partOf.identifier.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Location.partOf.identifier.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
use	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element id Location.partOf.identifier.use Short description usual \| official \| temp \| secondary \| old (If known) Definition The purpose of this identifier. Requirements Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. Comments Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. Data type code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: N/A rim: Role.code or implied by context
type	Σ	0..1	CodeableConceptBinding	There are no (further) constraints on this element Element id Location.partOf.identifier.type Short description Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. Requirements Allows users to make use of identifiers when the identifier system is not known. Comments This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. Data type CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD v2: CX.5 rim: Role.code or implied by context
system	Σ	1..1	uri	There are no (further) constraints on this element Element id Location.partOf.identifier.system Short description The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique. Requirements There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. Comments Identifier.system is always case sensitive. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General http://www.acme.com/identifiers/patient Mappings rim: n/a v2: CX.4 / EI-2-4 rim: II.root or Role.id.root servd: ./IdentifierType
value	Σ	1..1	string	There are no (further) constraints on this element Element id Location.partOf.identifier.value Short description The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system. Comments If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General 123456 Mappings rim: n/a v2: CX.1 / EI.1 rim: II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd: ./Value
period	Σ I	0..1	Period	There are no (further) constraints on this element Element id Location.partOf.identifier.period Short description Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use. Comments A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration. Data type Period Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` per-1: If present, start SHALL have a lower value than end `start.hasValue().not() or end.hasValue().not() or (start <= end)` Mappings rim: n/a v2: DR rim: IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"] v2: CX.7 + CX.8 rim: Role.effectiveTime or implied by context servd: ./StartDate and ./EndDate
assigner	Σ I	0..1	Reference(UK Core Organization)	There are no (further) constraints on this element Element id Location.partOf.identifier.assigner Short description Organization that issued id (may be just text) Definition Organization that issued/manages the identifier. Comments The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. Data type Reference(UK Core Organization) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2: CX.4 / (CX.4,CX.9,CX.10) rim: II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd: ./IdentifierIssuingAuthority
display	Σ	0..1	string	There are no (further) constraints on this element Element id Location.partOf.display Short description Text alternative for the resource Definition Plain text narrative that identifies the resource in addition to the resource reference. Comments This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: N/A
hoursOfOperation		0..*	BackboneElement	There are no (further) constraints on this element Element id Location.hoursOfOperation Short description What days/times during a week is this location usually open Definition What days/times during a week is this location usually open. Comments This type of information is commonly found published in directories and on websites informing customers when the facility is available. Specific services within the location may have their own hours which could be shorter (or longer) than the locations hours. Data type BackboneElement Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: .effectiveTime
id		0..1	string	There are no (further) constraints on this element Element id Location.hoursOfOperation.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Location.hoursOfOperation.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id Location.hoursOfOperation.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
daysOfWeek		0..*	codeBinding	There are no (further) constraints on this element Element id Location.hoursOfOperation.daysOfWeek Short description mon \| tue \| wed \| thu \| fri \| sat \| sun Definition Indicates which days of the week are available between the start and end Times. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type code Binding The days of the week. DaysOfWeek (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: .effectiveTime
allDay		0..1	boolean	There are no (further) constraints on this element Element id Location.hoursOfOperation.allDay Short description The Location is open all day Definition The Location is open all day. Data type boolean Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: .effectiveTime
openingTime		0..1	time	There are no (further) constraints on this element Element id Location.hoursOfOperation.openingTime Short description Time that the Location opens Definition Time that the Location opens. Data type time Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: .effectiveTime
closingTime		0..1	time	There are no (further) constraints on this element Element id Location.hoursOfOperation.closingTime Short description Time that the Location closes Definition Time that the Location closes. Data type time Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: .effectiveTime
availabilityExceptions		0..1	string	There are no (further) constraints on this element Element id Location.availabilityExceptions Short description Description of availability exceptions Definition A description of when the locations opening ours are different to normal, e.g. public holiday availability. Succinctly describing all possible exceptions to normal site availability as detailed in the opening hours Times. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
endpoint	I	0..*	Reference(Endpoint)	There are no (further) constraints on this element Element id Location.endpoint Short description Technical endpoints providing access to services operated for the location Definition Technical endpoints providing access to services operated for the location. Requirements Organizations may have different systems at different locations that provide various services and need to be able to define the technical connection details for how to connect to them, and for what purpose. Comments References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository. Data type Reference(Endpoint) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity)
id		0..1	string	There are no (further) constraints on this element Element id Location.endpoint.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Location.endpoint.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
reference	Σ I	0..1	string	There are no (further) constraints on this element Element id Location.endpoint.reference Short description Literal reference, Relative, internal or absolute URL Definition A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources. Comments Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: N/A
type	Σ	0..1	uriBinding	There are no (further) constraints on this element Element id Location.endpoint.type Short description Type the reference refers to (e.g. "Patient") Definition The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent. The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources). Comments This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified. Data type uri Binding Aa resource (or, for logical models, the URI of the logical model). ResourceType (extensible) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: N/A
identifier	Σ	0..1	Identifier	There are no (further) constraints on this element Element id Location.endpoint.identifier Short description Logical reference, when literal reference is not known Definition An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference. Comments When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it. Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation\|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any). Data type Identifier Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: CX / EI (occasionally, more often EI maps to a resource id or a URL) rim: II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd: Identifier rim: .identifier
id		0..1	string	There are no (further) constraints on this element Element id Location.endpoint.identifier.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Location.endpoint.identifier.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
use	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element id Location.endpoint.identifier.use Short description usual \| official \| temp \| secondary \| old (If known) Definition The purpose of this identifier. Requirements Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. Comments Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. Data type code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: N/A rim: Role.code or implied by context
type	Σ	0..1	CodeableConceptBinding	There are no (further) constraints on this element Element id Location.endpoint.identifier.type Short description Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. Requirements Allows users to make use of identifiers when the identifier system is not known. Comments This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. Data type CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD v2: CX.5 rim: Role.code or implied by context
system	Σ	0..1	uri	There are no (further) constraints on this element Element id Location.endpoint.identifier.system Short description The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique. Requirements There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. Comments Identifier.system is always case sensitive. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General http://www.acme.com/identifiers/patient Mappings rim: n/a v2: CX.4 / EI-2-4 rim: II.root or Role.id.root servd: ./IdentifierType
value	Σ	0..1	string	There are no (further) constraints on this element Element id Location.endpoint.identifier.value Short description The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system. Comments If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General 123456 Mappings rim: n/a v2: CX.1 / EI.1 rim: II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd: ./Value
period	Σ I	0..1	Period	There are no (further) constraints on this element Element id Location.endpoint.identifier.period Short description Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use. Comments A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration. Data type Period Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` per-1: If present, start SHALL have a lower value than end `start.hasValue().not() or end.hasValue().not() or (start <= end)` Mappings rim: n/a v2: DR rim: IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"] v2: CX.7 + CX.8 rim: Role.effectiveTime or implied by context servd: ./StartDate and ./EndDate
assigner	Σ I	0..1	Reference(UK Core Organization)	There are no (further) constraints on this element Element id Location.endpoint.identifier.assigner Short description Organization that issued id (may be just text) Definition Organization that issued/manages the identifier. Comments The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. Data type Reference(UK Core Organization) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2: CX.4 / (CX.4,CX.9,CX.10) rim: II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd: ./IdentifierIssuingAuthority
display	Σ	0..1	string	There are no (further) constraints on this element Element id Location.endpoint.display Short description Text alternative for the resource Definition Plain text narrative that identifies the resource in addition to the resource reference. Comments This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: N/A

Location	I		Location	There are no (further) constraints on this element Element id Location Short description Details and position information for a physical place Definition Details and position information for a physical place where services are provided and resources and participants may be stored, found, contained, or accommodated. Data type Location Constraints dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources `contained.contained.empty()` dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated `contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()` dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource `contained.where((('#'+id in (%resource.descendants().reference \| %resource.descendants().as(canonical) \| %resource.descendants().as(uri) \| %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty()` dom-6: A resource should have narrative for robust management text.`div`.exists() dom-5: If a resource is contained in another resource, it SHALL NOT have a security label `contained.meta.security.empty()` Mappings rim: Entity. Role, or Act rim: .Role[classCode=SDLC]
id	Σ	0..1	string	There are no (further) constraints on this element Element id Location.id Short description Logical id of this artifact Definition The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes. Comments The only time that a resource does not have an id is when it is being submitted to the server using a create operation. Data type string
meta	Σ	0..1	Meta	There are no (further) constraints on this element Element id Location.meta Short description Metadata about the resource Definition The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource. Data type Meta Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: N/A
implicitRules	Σ ?!	0..1	uri	There are no (further) constraints on this element Element id Location.implicitRules Short description A set of rules under which this content was created Definition A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc. Comments Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
language		0..1	codeBinding	There are no (further) constraints on this element Element id Location.language Short description Language of the resource content Definition The base language in which the resource is written. Comments Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute). Data type code Binding A human language. CommonLanguages (preferred) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
text		0..1	Narrative	There are no (further) constraints on this element Element id Location.text Short description Text summary of the resource, for human interpretation Alternate names narrative, html, xhtml, display Definition A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety. Comments Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later. Data type Narrative Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: N/A rim: Act.text?
contained		0..*	Resource	There are no (further) constraints on this element Element id Location.contained Short description Contained, inline Resources Alternate names inline resources, anonymous resources, contained resources Definition These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope. Comments This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels. Data type Resource Mappings rim: Entity. Role, or Act rim: N/A
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Location.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	?! I	0..*	Extension	There are no (further) constraints on this element Element id Location.modifierExtension Short description Extensions that cannot be ignored Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
identifier	S Σ	0..*	Identifier	Element id Location.identifier Short description Unique code or number identifying the location to its users Definition Unique code or number identifying the location to its users. Requirements Different location identities will apply which are managed by different registries Comments Identifiers for the location SHOULD be populated if the data exists Data type Identifier Sliced: Unordered, Open, by system(Value) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: CX / EI (occasionally, more often EI maps to a resource id or a URL) rim: II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd: Identifier w5: FiveWs.identifier rim: .id
odsSiteCode	Σ	0..0	Identifier	There are no (further) constraints on this element Element id Location.identifier:odsSiteCode Short description ODS Site code to identify the organisation at site level Definition ODS Site code to identify the organisation at site level. Requirements Organization label locations in registries, need to keep track of those. Data type Identifier Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: CX / EI (occasionally, more often EI maps to a resource id or a URL) rim: II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd: Identifier w5: FiveWs.identifier rim: .id
wrtsLocationIdentifier	Σ	0..1	Identifier	Element id Location.identifier:wrtsLocationIdentifier Short description The WRTS identifier for the location Definition The Welsh Reference Data Servcie identifier for the location Requirements Organization label locations in registries, need to keep track of those. Data type Identifier Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: CX / EI (occasionally, more often EI maps to a resource id or a URL) rim: II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd: Identifier w5: FiveWs.identifier rim: .id
id		0..1	string	There are no (further) constraints on this element Element id Location.identifier:wrtsLocationIdentifier.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Location.identifier:wrtsLocationIdentifier.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
use	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element id Location.identifier:wrtsLocationIdentifier.use Short description usual \| official \| temp \| secondary \| old (If known) Definition The purpose of this identifier. Requirements Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. Comments Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. Data type code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: N/A rim: Role.code or implied by context
type	Σ	0..1	CodeableConceptBinding	There are no (further) constraints on this element Element id Location.identifier:wrtsLocationIdentifier.type Short description Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. Requirements Allows users to make use of identifiers when the identifier system is not known. Comments This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. Data type CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD v2: CX.5 rim: Role.code or implied by context
system	Σ	1..1	uriFixed Value	Element id Location.identifier:wrtsLocationIdentifier.system Short description WRTS location identifier Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique. Requirements There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. Comments Identifier.system is always case sensitive. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Fixed value https://fhir.nhs.wales/Id/wrts-location-identifier Mappings rim: n/a v2: CX.4 / EI-2-4 rim: II.root or Role.id.root servd: ./IdentifierType
value	Σ	1..1	string	There are no (further) constraints on this element Element id Location.identifier:wrtsLocationIdentifier.value Short description The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system. Comments If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General 123456 Mappings rim: n/a v2: CX.1 / EI.1 rim: II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd: ./Value
period	Σ I	0..1	Period	There are no (further) constraints on this element Element id Location.identifier:wrtsLocationIdentifier.period Short description Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use. Comments A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration. Data type Period Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` per-1: If present, start SHALL have a lower value than end `start.hasValue().not() or end.hasValue().not() or (start <= end)` Mappings rim: n/a v2: DR rim: IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"] v2: CX.7 + CX.8 rim: Role.effectiveTime or implied by context servd: ./StartDate and ./EndDate
assigner	Σ I	0..1	Reference(Organization)	There are no (further) constraints on this element Element id Location.identifier:wrtsLocationIdentifier.assigner Short description Organization that issued id (may be just text) Definition Organization that issued/manages the identifier. Comments The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. Data type Reference(Organization) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2: CX.4 / (CX.4,CX.9,CX.10) rim: II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd: ./IdentifierIssuingAuthority
status	S Σ ?!	0..1	codeBinding	Element id Location.status Short description active \| suspended \| inactive Definition The status property covers the general availability of the resource, not the current value which may be covered by the operationStatus, or by a schedule/slots if they are configured for the location. Comments The status of the location (i.e., whether it is active, suspended or inactive) SHOULD be populated if the data exists. Data type code Binding Indicates whether the location is still in use. LocationStatus (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a w5: FiveWs.status rim: .statusCode
operationalStatus	Σ	0..1	CodingBinding	There are no (further) constraints on this element Element id Location.operationalStatus Short description The operational status of the location (typically only for a bed/room) Definition The operational status covers operation values most relevant to beds (but can also apply to rooms/units/chairs/etc. such as an isolation unit/dialysis chair). This typically covers concepts such as contamination, housekeeping, and other activities like maintenance. Comments Codes may be defined very casually in enumerations or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Data type Coding Binding The operational status if the location (where typically a bed/room). v2.0116 (preferred) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim: CV orim: fhir:Coding rdfs:subClassOf dt:CDCoding w5: FiveWs.status
name	S Σ	1..1	string	Element id Location.name Short description Name of the location as used by humans Definition Name of the location as used by humans. Does not need to be unique. Comments Location name SHALL be populated. If the name of a location changes, consider putting the old name in the alias column so that it can still be located through searches. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: .name
alias		0..*	string	There are no (further) constraints on this element Element id Location.alias Short description A list of alternate names that the location is known as, or was known as, in the past Definition A list of alternate names that the location is known as, or was known as, in the past. Requirements Over time locations and organizations go through many changes and can be known by different names. For searching knowing previous names that the location was known by can be very useful. Comments There are no dates associated with the alias/historic names, as this is not intended to track when names were used, but to assist in searching so that older names can still result in identifying the location. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: .name
description	Σ	0..1	string	There are no (further) constraints on this element Element id Location.description Short description Additional details about the location that could be displayed as further information to identify the location beyond its name Definition Description of the Location, which helps in finding or referencing the place. Requirements Humans need additional information to verify a correct location has been identified. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: .playingEntity[classCode=PLC determinerCode=INSTANCE].desc
mode	Σ	0..1	codeBinding	There are no (further) constraints on this element Element id Location.mode Short description instance \| kind Definition Indicates whether a resource instance represents a specific location or a class of locations. Requirements When using a Location resource for scheduling or orders, we need to be able to refer to a class of Locations instead of a specific Location. Comments This is labeled as a modifier because whether or not the location is a class of locations changes how it can be used and understood. Data type code Binding Indicates whether a resource instance represents a specific location or a class of locations. LocationMode (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a w5: FiveWs.class rim: .playingEntity[classCode=PLC].determinerCode
type	Σ	0..*	CodeableConceptBinding	There are no (further) constraints on this element Element id Location.type Short description Type of function performed Definition Indicates the type of function performed at the location. Comments Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination. Data type CodeableConcept Binding Indicates the type of function performed at the location. v3.ServiceDeliveryLocationRoleType (extensible) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD w5: FiveWs.class rim: .code
telecom	I	0..*	ContactPoint	There are no (further) constraints on this element Element id Location.telecom Short description Contact details of the location Definition The contact details of communication devices available at the location. This can include phone numbers, fax numbers, mobile numbers, email addresses and web sites. Data type ContactPoint Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` cpt-2: A system is required if a value is provided. `value.empty() or system.exists()` Mappings rim: n/a v2: XTN rim: TEL servd: ContactPoint rim: .telecom
address	S	0..1	Address	There are no (further) constraints on this element Element id Location.address Short description Physical location Definition Physical location. Requirements If locations can be visited, we need to keep track of their address. Comments Additional addresses should be recorded using another instance of the Location resource, or via the Organization. Data type Address Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: XAD rim: AD servd: Address rim: .addr
physicalType	Σ	0..1	CodeableConcept	There are no (further) constraints on this element Element id Location.physicalType Short description Physical form of the location Definition Physical form of the location, e.g. building, room, vehicle, road. Requirements For purposes of showing relevant locations in queries, we need to categorize locations. Comments Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination. Data type CodeableConcept Binding Physical form of the location. LocationType (example) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD w5: FiveWs.class rim: .playingEntity [classCode=PLC].code
position		0..1	BackboneElement	There are no (further) constraints on this element Element id Location.position Short description The absolute geographic location Definition The absolute geographic location of the Location, expressed using the WGS84 datum (This is the same co-ordinate system used in KML). Requirements For mobile applications and automated route-finding knowing the exact location of the Location is required. Data type BackboneElement Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: .playingEntity [classCode=PLC determinerCode=INSTANCE].positionText
id		0..1	string	There are no (further) constraints on this element Element id Location.position.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Location.position.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id Location.position.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
longitude		1..1	decimal	There are no (further) constraints on this element Element id Location.position.longitude Short description Longitude with WGS84 datum Definition Longitude. The value domain and the interpretation are the same as for the text of the longitude element in KML (see notes below). Comments Do not use an IEEE type floating point type, instead use something that works like a true decimal, with inbuilt precision (e.g. Java BigInteger) Data type decimal Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: (RIM Opted not to map the sub-elements of GPS location, is now an OBS)
latitude		1..1	decimal	There are no (further) constraints on this element Element id Location.position.latitude Short description Latitude with WGS84 datum Definition Latitude. The value domain and the interpretation are the same as for the text of the latitude element in KML (see notes below). Comments Do not use an IEEE type floating point type, instead use something that works like a true decimal, with inbuilt precision (e.g. Java BigInteger) Data type decimal Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: (RIM Opted not to map the sub-elements of GPS location, is now an OBS)
altitude		0..1	decimal	There are no (further) constraints on this element Element id Location.position.altitude Short description Altitude with WGS84 datum Definition Altitude. The value domain and the interpretation are the same as for the text of the altitude element in KML (see notes below). Comments Do not use an IEEE type floating point type, instead use something that works like a true decimal, with inbuilt precision (e.g. Java BigInteger) Data type decimal Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: (RIM Opted not to map the sub-elements of GPS location, is now an OBS)
managingOrganization	S Σ I	0..1	Reference(Data Standards Wales Organization)	Element id Location.managingOrganization Short description Organization responsible for provisioning and upkeep Definition The organization responsible for the provisioning and upkeep of the location. Requirements Need to know who manages the location. Comments This can also be used as the part of the organization hierarchy where this location provides services. These services can be defined through the HealthcareService resource. Data type Reference(Data Standards Wales Organization) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity) rim: .scopingEntity[classCode=ORG determinerKind=INSTANCE]
id		0..1	string	There are no (further) constraints on this element Element id Location.managingOrganization.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Location.managingOrganization.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
reference	Σ I	0..1	string	There are no (further) constraints on this element Element id Location.managingOrganization.reference Short description Literal reference, Relative, internal or absolute URL Definition A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources. Comments Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: N/A
type	Σ	0..1	uriBinding	There are no (further) constraints on this element Element id Location.managingOrganization.type Short description Type the reference refers to (e.g. "Patient") Definition The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent. The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources). Comments This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified. Data type uri Binding Aa resource (or, for logical models, the URI of the logical model). ResourceType (extensible) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: N/A
identifier	Σ	0..1	Identifier	There are no (further) constraints on this element Element id Location.managingOrganization.identifier Short description Logical reference, when literal reference is not known Definition An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference. Comments When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it. Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation\|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any). Data type Identifier Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: CX / EI (occasionally, more often EI maps to a resource id or a URL) rim: II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd: Identifier rim: .identifier
id		0..1	string	There are no (further) constraints on this element Element id Location.managingOrganization.identifier.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Location.managingOrganization.identifier.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
use	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element id Location.managingOrganization.identifier.use Short description usual \| official \| temp \| secondary \| old (If known) Definition The purpose of this identifier. Requirements Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. Comments Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. Data type code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: N/A rim: Role.code or implied by context
type	Σ	0..1	CodeableConceptBinding	There are no (further) constraints on this element Element id Location.managingOrganization.identifier.type Short description Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. Requirements Allows users to make use of identifiers when the identifier system is not known. Comments This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. Data type CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD v2: CX.5 rim: Role.code or implied by context
system	Σ	1..1	uri	There are no (further) constraints on this element Element id Location.managingOrganization.identifier.system Short description The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique. Requirements There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. Comments Identifier.system is always case sensitive. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General http://www.acme.com/identifiers/patient Mappings rim: n/a v2: CX.4 / EI-2-4 rim: II.root or Role.id.root servd: ./IdentifierType
value	Σ	1..1	string	There are no (further) constraints on this element Element id Location.managingOrganization.identifier.value Short description The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system. Comments If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General 123456 Mappings rim: n/a v2: CX.1 / EI.1 rim: II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd: ./Value
period	Σ I	0..1	Period	There are no (further) constraints on this element Element id Location.managingOrganization.identifier.period Short description Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use. Comments A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration. Data type Period Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` per-1: If present, start SHALL have a lower value than end `start.hasValue().not() or end.hasValue().not() or (start <= end)` Mappings rim: n/a v2: DR rim: IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"] v2: CX.7 + CX.8 rim: Role.effectiveTime or implied by context servd: ./StartDate and ./EndDate
assigner	Σ I	0..1	Reference(UK Core Organization)	There are no (further) constraints on this element Element id Location.managingOrganization.identifier.assigner Short description Organization that issued id (may be just text) Definition Organization that issued/manages the identifier. Comments The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. Data type Reference(UK Core Organization) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2: CX.4 / (CX.4,CX.9,CX.10) rim: II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd: ./IdentifierIssuingAuthority
display	Σ	0..1	string	There are no (further) constraints on this element Element id Location.managingOrganization.display Short description Text alternative for the resource Definition Plain text narrative that identifies the resource in addition to the resource reference. Comments This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: N/A
partOf	S I	0..1	Reference(Data Standards Wales Location)	Element id Location.partOf Short description Another Location this one is physically a part of Definition Another Location of which this Location is physically a part of. Requirements For purposes of location, display and identification, knowing which locations are located within other locations is important. Comments References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository. Data type Reference(Data Standards Wales Location) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity) rim: .inboundLink[typeCode=PART].source[classCode=SDLC]
id		0..1	string	There are no (further) constraints on this element Element id Location.partOf.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Location.partOf.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
reference	Σ I	0..1	string	There are no (further) constraints on this element Element id Location.partOf.reference Short description Literal reference, Relative, internal or absolute URL Definition A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources. Comments Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: N/A
type	Σ	0..1	uriBinding	There are no (further) constraints on this element Element id Location.partOf.type Short description Type the reference refers to (e.g. "Patient") Definition The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent. The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources). Comments This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified. Data type uri Binding Aa resource (or, for logical models, the URI of the logical model). ResourceType (extensible) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: N/A
identifier	Σ	0..1	Identifier	There are no (further) constraints on this element Element id Location.partOf.identifier Short description Logical reference, when literal reference is not known Definition An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference. Comments When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it. Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation\|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any). Data type Identifier Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: CX / EI (occasionally, more often EI maps to a resource id or a URL) rim: II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd: Identifier rim: .identifier
id		0..1	string	There are no (further) constraints on this element Element id Location.partOf.identifier.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Location.partOf.identifier.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
use	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element id Location.partOf.identifier.use Short description usual \| official \| temp \| secondary \| old (If known) Definition The purpose of this identifier. Requirements Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. Comments Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. Data type code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: N/A rim: Role.code or implied by context
type	Σ	0..1	CodeableConceptBinding	There are no (further) constraints on this element Element id Location.partOf.identifier.type Short description Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. Requirements Allows users to make use of identifiers when the identifier system is not known. Comments This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. Data type CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD v2: CX.5 rim: Role.code or implied by context
system	Σ	1..1	uri	There are no (further) constraints on this element Element id Location.partOf.identifier.system Short description The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique. Requirements There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. Comments Identifier.system is always case sensitive. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General http://www.acme.com/identifiers/patient Mappings rim: n/a v2: CX.4 / EI-2-4 rim: II.root or Role.id.root servd: ./IdentifierType
value	Σ	1..1	string	There are no (further) constraints on this element Element id Location.partOf.identifier.value Short description The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system. Comments If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General 123456 Mappings rim: n/a v2: CX.1 / EI.1 rim: II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd: ./Value
period	Σ I	0..1	Period	There are no (further) constraints on this element Element id Location.partOf.identifier.period Short description Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use. Comments A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration. Data type Period Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` per-1: If present, start SHALL have a lower value than end `start.hasValue().not() or end.hasValue().not() or (start <= end)` Mappings rim: n/a v2: DR rim: IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"] v2: CX.7 + CX.8 rim: Role.effectiveTime or implied by context servd: ./StartDate and ./EndDate
assigner	Σ I	0..1	Reference(UK Core Organization)	There are no (further) constraints on this element Element id Location.partOf.identifier.assigner Short description Organization that issued id (may be just text) Definition Organization that issued/manages the identifier. Comments The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. Data type Reference(UK Core Organization) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2: CX.4 / (CX.4,CX.9,CX.10) rim: II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd: ./IdentifierIssuingAuthority
display	Σ	0..1	string	There are no (further) constraints on this element Element id Location.partOf.display Short description Text alternative for the resource Definition Plain text narrative that identifies the resource in addition to the resource reference. Comments This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: N/A
hoursOfOperation		0..*	BackboneElement	There are no (further) constraints on this element Element id Location.hoursOfOperation Short description What days/times during a week is this location usually open Definition What days/times during a week is this location usually open. Comments This type of information is commonly found published in directories and on websites informing customers when the facility is available. Specific services within the location may have their own hours which could be shorter (or longer) than the locations hours. Data type BackboneElement Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: .effectiveTime
id		0..1	string	There are no (further) constraints on this element Element id Location.hoursOfOperation.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Location.hoursOfOperation.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id Location.hoursOfOperation.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
daysOfWeek		0..*	codeBinding	There are no (further) constraints on this element Element id Location.hoursOfOperation.daysOfWeek Short description mon \| tue \| wed \| thu \| fri \| sat \| sun Definition Indicates which days of the week are available between the start and end Times. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type code Binding The days of the week. DaysOfWeek (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: .effectiveTime
allDay		0..1	boolean	There are no (further) constraints on this element Element id Location.hoursOfOperation.allDay Short description The Location is open all day Definition The Location is open all day. Data type boolean Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: .effectiveTime
openingTime		0..1	time	There are no (further) constraints on this element Element id Location.hoursOfOperation.openingTime Short description Time that the Location opens Definition Time that the Location opens. Data type time Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: .effectiveTime
closingTime		0..1	time	There are no (further) constraints on this element Element id Location.hoursOfOperation.closingTime Short description Time that the Location closes Definition Time that the Location closes. Data type time Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: .effectiveTime
availabilityExceptions		0..1	string	There are no (further) constraints on this element Element id Location.availabilityExceptions Short description Description of availability exceptions Definition A description of when the locations opening ours are different to normal, e.g. public holiday availability. Succinctly describing all possible exceptions to normal site availability as detailed in the opening hours Times. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
endpoint	I	0..*	Reference(Endpoint)	There are no (further) constraints on this element Element id Location.endpoint Short description Technical endpoints providing access to services operated for the location Definition Technical endpoints providing access to services operated for the location. Requirements Organizations may have different systems at different locations that provide various services and need to be able to define the technical connection details for how to connect to them, and for what purpose. Comments References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository. Data type Reference(Endpoint) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity)
id		0..1	string	There are no (further) constraints on this element Element id Location.endpoint.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Location.endpoint.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
reference	Σ I	0..1	string	There are no (further) constraints on this element Element id Location.endpoint.reference Short description Literal reference, Relative, internal or absolute URL Definition A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources. Comments Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: N/A
type	Σ	0..1	uriBinding	There are no (further) constraints on this element Element id Location.endpoint.type Short description Type the reference refers to (e.g. "Patient") Definition The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent. The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources). Comments This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified. Data type uri Binding Aa resource (or, for logical models, the URI of the logical model). ResourceType (extensible) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: N/A
identifier	Σ	0..1	Identifier	There are no (further) constraints on this element Element id Location.endpoint.identifier Short description Logical reference, when literal reference is not known Definition An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference. Comments When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it. Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation\|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any). Data type Identifier Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: CX / EI (occasionally, more often EI maps to a resource id or a URL) rim: II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd: Identifier rim: .identifier
id		0..1	string	There are no (further) constraints on this element Element id Location.endpoint.identifier.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Location.endpoint.identifier.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
use	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element id Location.endpoint.identifier.use Short description usual \| official \| temp \| secondary \| old (If known) Definition The purpose of this identifier. Requirements Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. Comments Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. Data type code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: N/A rim: Role.code or implied by context
type	Σ	0..1	CodeableConceptBinding	There are no (further) constraints on this element Element id Location.endpoint.identifier.type Short description Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. Requirements Allows users to make use of identifiers when the identifier system is not known. Comments This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. Data type CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD v2: CX.5 rim: Role.code or implied by context
system	Σ	0..1	uri	There are no (further) constraints on this element Element id Location.endpoint.identifier.system Short description The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique. Requirements There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. Comments Identifier.system is always case sensitive. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General http://www.acme.com/identifiers/patient Mappings rim: n/a v2: CX.4 / EI-2-4 rim: II.root or Role.id.root servd: ./IdentifierType
value	Σ	0..1	string	There are no (further) constraints on this element Element id Location.endpoint.identifier.value Short description The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system. Comments If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General 123456 Mappings rim: n/a v2: CX.1 / EI.1 rim: II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd: ./Value
period	Σ I	0..1	Period	There are no (further) constraints on this element Element id Location.endpoint.identifier.period Short description Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use. Comments A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration. Data type Period Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` per-1: If present, start SHALL have a lower value than end `start.hasValue().not() or end.hasValue().not() or (start <= end)` Mappings rim: n/a v2: DR rim: IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"] v2: CX.7 + CX.8 rim: Role.effectiveTime or implied by context servd: ./StartDate and ./EndDate
assigner	Σ I	0..1	Reference(UK Core Organization)	There are no (further) constraints on this element Element id Location.endpoint.identifier.assigner Short description Organization that issued id (may be just text) Definition Organization that issued/manages the identifier. Comments The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. Data type Reference(UK Core Organization) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2: CX.4 / (CX.4,CX.9,CX.10) rim: II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd: ./IdentifierIssuingAuthority
display	Σ	0..1	string	There are no (further) constraints on this element Element id Location.endpoint.display Short description Text alternative for the resource Definition Plain text narrative that identifies the resource in addition to the resource reference. Comments This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: N/A

Location	I		Location	There are no (further) constraints on this element Element id Location Short description Details and position information for a physical place Definition Details and position information for a physical place where services are provided and resources and participants may be stored, found, contained, or accommodated. Data type Location Constraints dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources `contained.contained.empty()` dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated `contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()` dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource `contained.where((('#'+id in (%resource.descendants().reference \| %resource.descendants().as(canonical) \| %resource.descendants().as(uri) \| %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty()` dom-6: A resource should have narrative for robust management text.`div`.exists() dom-5: If a resource is contained in another resource, it SHALL NOT have a security label `contained.meta.security.empty()` Mappings rim: Entity. Role, or Act rim: .Role[classCode=SDLC]
id	Σ	0..1	string	There are no (further) constraints on this element Element id Location.id Short description Logical id of this artifact Definition The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes. Comments The only time that a resource does not have an id is when it is being submitted to the server using a create operation. Data type string
meta	Σ	0..1	Meta	There are no (further) constraints on this element Element id Location.meta Short description Metadata about the resource Definition The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource. Data type Meta Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: N/A
implicitRules	Σ ?!	0..1	uri	There are no (further) constraints on this element Element id Location.implicitRules Short description A set of rules under which this content was created Definition A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc. Comments Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
language		0..1	codeBinding	There are no (further) constraints on this element Element id Location.language Short description Language of the resource content Definition The base language in which the resource is written. Comments Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute). Data type code Binding A human language. CommonLanguages (preferred) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
text		0..1	Narrative	There are no (further) constraints on this element Element id Location.text Short description Text summary of the resource, for human interpretation Alternate names narrative, html, xhtml, display Definition A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety. Comments Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later. Data type Narrative Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: N/A rim: Act.text?
contained		0..*	Resource	There are no (further) constraints on this element Element id Location.contained Short description Contained, inline Resources Alternate names inline resources, anonymous resources, contained resources Definition These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope. Comments This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels. Data type Resource Mappings rim: Entity. Role, or Act rim: N/A
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Location.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	?! I	0..*	Extension	There are no (further) constraints on this element Element id Location.modifierExtension Short description Extensions that cannot be ignored Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
identifier	S Σ	0..*	Identifier	Element id Location.identifier Short description Unique code or number identifying the location to its users Definition Unique code or number identifying the location to its users. Requirements Different location identities will apply which are managed by different registries Comments Identifiers for the location SHOULD be populated if the data exists Data type Identifier Sliced: Unordered, Open, by system(Value) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: CX / EI (occasionally, more often EI maps to a resource id or a URL) rim: II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd: Identifier w5: FiveWs.identifier rim: .id
odsSiteCode	Σ	0..0	Identifier	There are no (further) constraints on this element Element id Location.identifier:odsSiteCode Short description ODS Site code to identify the organisation at site level Definition ODS Site code to identify the organisation at site level. Requirements Organization label locations in registries, need to keep track of those. Data type Identifier Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: CX / EI (occasionally, more often EI maps to a resource id or a URL) rim: II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd: Identifier w5: FiveWs.identifier rim: .id
wrtsLocationIdentifier	Σ	0..1	Identifier	Element id Location.identifier:wrtsLocationIdentifier Short description The WRTS identifier for the location Definition The Welsh Reference Data Servcie identifier for the location Requirements Organization label locations in registries, need to keep track of those. Data type Identifier Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: CX / EI (occasionally, more often EI maps to a resource id or a URL) rim: II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd: Identifier w5: FiveWs.identifier rim: .id
id		0..1	string	There are no (further) constraints on this element Element id Location.identifier:wrtsLocationIdentifier.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Location.identifier:wrtsLocationIdentifier.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
use	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element id Location.identifier:wrtsLocationIdentifier.use Short description usual \| official \| temp \| secondary \| old (If known) Definition The purpose of this identifier. Requirements Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. Comments Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. Data type code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: N/A rim: Role.code or implied by context
type	Σ	0..1	CodeableConceptBinding	There are no (further) constraints on this element Element id Location.identifier:wrtsLocationIdentifier.type Short description Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. Requirements Allows users to make use of identifiers when the identifier system is not known. Comments This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. Data type CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD v2: CX.5 rim: Role.code or implied by context
system	Σ	1..1	uriFixed Value	Element id Location.identifier:wrtsLocationIdentifier.system Short description WRTS location identifier Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique. Requirements There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. Comments Identifier.system is always case sensitive. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Fixed value https://fhir.nhs.wales/Id/wrts-location-identifier Mappings rim: n/a v2: CX.4 / EI-2-4 rim: II.root or Role.id.root servd: ./IdentifierType
value	Σ	1..1	string	There are no (further) constraints on this element Element id Location.identifier:wrtsLocationIdentifier.value Short description The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system. Comments If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General 123456 Mappings rim: n/a v2: CX.1 / EI.1 rim: II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd: ./Value
period	Σ I	0..1	Period	There are no (further) constraints on this element Element id Location.identifier:wrtsLocationIdentifier.period Short description Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use. Comments A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration. Data type Period Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` per-1: If present, start SHALL have a lower value than end `start.hasValue().not() or end.hasValue().not() or (start <= end)` Mappings rim: n/a v2: DR rim: IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"] v2: CX.7 + CX.8 rim: Role.effectiveTime or implied by context servd: ./StartDate and ./EndDate
assigner	Σ I	0..1	Reference(Organization)	There are no (further) constraints on this element Element id Location.identifier:wrtsLocationIdentifier.assigner Short description Organization that issued id (may be just text) Definition Organization that issued/manages the identifier. Comments The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. Data type Reference(Organization) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2: CX.4 / (CX.4,CX.9,CX.10) rim: II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd: ./IdentifierIssuingAuthority
status	S Σ ?!	0..1	codeBinding	Element id Location.status Short description active \| suspended \| inactive Definition The status property covers the general availability of the resource, not the current value which may be covered by the operationStatus, or by a schedule/slots if they are configured for the location. Comments The status of the location (i.e., whether it is active, suspended or inactive) SHOULD be populated if the data exists. Data type code Binding Indicates whether the location is still in use. LocationStatus (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a w5: FiveWs.status rim: .statusCode
operationalStatus	Σ	0..1	CodingBinding	There are no (further) constraints on this element Element id Location.operationalStatus Short description The operational status of the location (typically only for a bed/room) Definition The operational status covers operation values most relevant to beds (but can also apply to rooms/units/chairs/etc. such as an isolation unit/dialysis chair). This typically covers concepts such as contamination, housekeeping, and other activities like maintenance. Comments Codes may be defined very casually in enumerations or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Data type Coding Binding The operational status if the location (where typically a bed/room). v2.0116 (preferred) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim: CV orim: fhir:Coding rdfs:subClassOf dt:CDCoding w5: FiveWs.status
name	S Σ	1..1	string	Element id Location.name Short description Name of the location as used by humans Definition Name of the location as used by humans. Does not need to be unique. Comments Location name SHALL be populated. If the name of a location changes, consider putting the old name in the alias column so that it can still be located through searches. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: .name
alias		0..*	string	There are no (further) constraints on this element Element id Location.alias Short description A list of alternate names that the location is known as, or was known as, in the past Definition A list of alternate names that the location is known as, or was known as, in the past. Requirements Over time locations and organizations go through many changes and can be known by different names. For searching knowing previous names that the location was known by can be very useful. Comments There are no dates associated with the alias/historic names, as this is not intended to track when names were used, but to assist in searching so that older names can still result in identifying the location. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: .name
description	Σ	0..1	string	There are no (further) constraints on this element Element id Location.description Short description Additional details about the location that could be displayed as further information to identify the location beyond its name Definition Description of the Location, which helps in finding or referencing the place. Requirements Humans need additional information to verify a correct location has been identified. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: .playingEntity[classCode=PLC determinerCode=INSTANCE].desc
mode	Σ	0..1	codeBinding	There are no (further) constraints on this element Element id Location.mode Short description instance \| kind Definition Indicates whether a resource instance represents a specific location or a class of locations. Requirements When using a Location resource for scheduling or orders, we need to be able to refer to a class of Locations instead of a specific Location. Comments This is labeled as a modifier because whether or not the location is a class of locations changes how it can be used and understood. Data type code Binding Indicates whether a resource instance represents a specific location or a class of locations. LocationMode (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a w5: FiveWs.class rim: .playingEntity[classCode=PLC].determinerCode
type	Σ	0..*	CodeableConceptBinding	There are no (further) constraints on this element Element id Location.type Short description Type of function performed Definition Indicates the type of function performed at the location. Comments Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination. Data type CodeableConcept Binding Indicates the type of function performed at the location. v3.ServiceDeliveryLocationRoleType (extensible) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD w5: FiveWs.class rim: .code
telecom	I	0..*	ContactPoint	There are no (further) constraints on this element Element id Location.telecom Short description Contact details of the location Definition The contact details of communication devices available at the location. This can include phone numbers, fax numbers, mobile numbers, email addresses and web sites. Data type ContactPoint Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` cpt-2: A system is required if a value is provided. `value.empty() or system.exists()` Mappings rim: n/a v2: XTN rim: TEL servd: ContactPoint rim: .telecom
address	S	0..1	Address	There are no (further) constraints on this element Element id Location.address Short description Physical location Definition Physical location. Requirements If locations can be visited, we need to keep track of their address. Comments Additional addresses should be recorded using another instance of the Location resource, or via the Organization. Data type Address Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: XAD rim: AD servd: Address rim: .addr
physicalType	Σ	0..1	CodeableConcept	There are no (further) constraints on this element Element id Location.physicalType Short description Physical form of the location Definition Physical form of the location, e.g. building, room, vehicle, road. Requirements For purposes of showing relevant locations in queries, we need to categorize locations. Comments Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination. Data type CodeableConcept Binding Physical form of the location. LocationType (example) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD w5: FiveWs.class rim: .playingEntity [classCode=PLC].code
position		0..1	BackboneElement	There are no (further) constraints on this element Element id Location.position Short description The absolute geographic location Definition The absolute geographic location of the Location, expressed using the WGS84 datum (This is the same co-ordinate system used in KML). Requirements For mobile applications and automated route-finding knowing the exact location of the Location is required. Data type BackboneElement Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: .playingEntity [classCode=PLC determinerCode=INSTANCE].positionText
id		0..1	string	There are no (further) constraints on this element Element id Location.position.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Location.position.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id Location.position.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
longitude		1..1	decimal	There are no (further) constraints on this element Element id Location.position.longitude Short description Longitude with WGS84 datum Definition Longitude. The value domain and the interpretation are the same as for the text of the longitude element in KML (see notes below). Comments Do not use an IEEE type floating point type, instead use something that works like a true decimal, with inbuilt precision (e.g. Java BigInteger) Data type decimal Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: (RIM Opted not to map the sub-elements of GPS location, is now an OBS)
latitude		1..1	decimal	There are no (further) constraints on this element Element id Location.position.latitude Short description Latitude with WGS84 datum Definition Latitude. The value domain and the interpretation are the same as for the text of the latitude element in KML (see notes below). Comments Do not use an IEEE type floating point type, instead use something that works like a true decimal, with inbuilt precision (e.g. Java BigInteger) Data type decimal Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: (RIM Opted not to map the sub-elements of GPS location, is now an OBS)
altitude		0..1	decimal	There are no (further) constraints on this element Element id Location.position.altitude Short description Altitude with WGS84 datum Definition Altitude. The value domain and the interpretation are the same as for the text of the altitude element in KML (see notes below). Comments Do not use an IEEE type floating point type, instead use something that works like a true decimal, with inbuilt precision (e.g. Java BigInteger) Data type decimal Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: (RIM Opted not to map the sub-elements of GPS location, is now an OBS)
managingOrganization	S Σ I	0..1	Reference(Data Standards Wales Organization)	Element id Location.managingOrganization Short description Organization responsible for provisioning and upkeep Definition The organization responsible for the provisioning and upkeep of the location. Requirements Need to know who manages the location. Comments This can also be used as the part of the organization hierarchy where this location provides services. These services can be defined through the HealthcareService resource. Data type Reference(Data Standards Wales Organization) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity) rim: .scopingEntity[classCode=ORG determinerKind=INSTANCE]
id		0..1	string	There are no (further) constraints on this element Element id Location.managingOrganization.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Location.managingOrganization.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
reference	Σ I	0..1	string	There are no (further) constraints on this element Element id Location.managingOrganization.reference Short description Literal reference, Relative, internal or absolute URL Definition A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources. Comments Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: N/A
type	Σ	0..1	uriBinding	There are no (further) constraints on this element Element id Location.managingOrganization.type Short description Type the reference refers to (e.g. "Patient") Definition The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent. The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources). Comments This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified. Data type uri Binding Aa resource (or, for logical models, the URI of the logical model). ResourceType (extensible) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: N/A
identifier	Σ	0..1	Identifier	There are no (further) constraints on this element Element id Location.managingOrganization.identifier Short description Logical reference, when literal reference is not known Definition An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference. Comments When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it. Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation\|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any). Data type Identifier Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: CX / EI (occasionally, more often EI maps to a resource id or a URL) rim: II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd: Identifier rim: .identifier
id		0..1	string	There are no (further) constraints on this element Element id Location.managingOrganization.identifier.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Location.managingOrganization.identifier.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
use	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element id Location.managingOrganization.identifier.use Short description usual \| official \| temp \| secondary \| old (If known) Definition The purpose of this identifier. Requirements Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. Comments Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. Data type code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: N/A rim: Role.code or implied by context
type	Σ	0..1	CodeableConceptBinding	There are no (further) constraints on this element Element id Location.managingOrganization.identifier.type Short description Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. Requirements Allows users to make use of identifiers when the identifier system is not known. Comments This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. Data type CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD v2: CX.5 rim: Role.code or implied by context
system	Σ	1..1	uri	There are no (further) constraints on this element Element id Location.managingOrganization.identifier.system Short description The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique. Requirements There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. Comments Identifier.system is always case sensitive. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General http://www.acme.com/identifiers/patient Mappings rim: n/a v2: CX.4 / EI-2-4 rim: II.root or Role.id.root servd: ./IdentifierType
value	Σ	1..1	string	There are no (further) constraints on this element Element id Location.managingOrganization.identifier.value Short description The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system. Comments If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General 123456 Mappings rim: n/a v2: CX.1 / EI.1 rim: II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd: ./Value
period	Σ I	0..1	Period	There are no (further) constraints on this element Element id Location.managingOrganization.identifier.period Short description Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use. Comments A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration. Data type Period Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` per-1: If present, start SHALL have a lower value than end `start.hasValue().not() or end.hasValue().not() or (start <= end)` Mappings rim: n/a v2: DR rim: IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"] v2: CX.7 + CX.8 rim: Role.effectiveTime or implied by context servd: ./StartDate and ./EndDate
assigner	Σ I	0..1	Reference(UK Core Organization)	There are no (further) constraints on this element Element id Location.managingOrganization.identifier.assigner Short description Organization that issued id (may be just text) Definition Organization that issued/manages the identifier. Comments The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. Data type Reference(UK Core Organization) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2: CX.4 / (CX.4,CX.9,CX.10) rim: II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd: ./IdentifierIssuingAuthority
display	Σ	0..1	string	There are no (further) constraints on this element Element id Location.managingOrganization.display Short description Text alternative for the resource Definition Plain text narrative that identifies the resource in addition to the resource reference. Comments This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: N/A
partOf	S I	0..1	Reference(Data Standards Wales Location)	Element id Location.partOf Short description Another Location this one is physically a part of Definition Another Location of which this Location is physically a part of. Requirements For purposes of location, display and identification, knowing which locations are located within other locations is important. Comments References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository. Data type Reference(Data Standards Wales Location) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity) rim: .inboundLink[typeCode=PART].source[classCode=SDLC]
id		0..1	string	There are no (further) constraints on this element Element id Location.partOf.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Location.partOf.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
reference	Σ I	0..1	string	There are no (further) constraints on this element Element id Location.partOf.reference Short description Literal reference, Relative, internal or absolute URL Definition A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources. Comments Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: N/A
type	Σ	0..1	uriBinding	There are no (further) constraints on this element Element id Location.partOf.type Short description Type the reference refers to (e.g. "Patient") Definition The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent. The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources). Comments This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified. Data type uri Binding Aa resource (or, for logical models, the URI of the logical model). ResourceType (extensible) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: N/A
identifier	Σ	0..1	Identifier	There are no (further) constraints on this element Element id Location.partOf.identifier Short description Logical reference, when literal reference is not known Definition An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference. Comments When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it. Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation\|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any). Data type Identifier Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: CX / EI (occasionally, more often EI maps to a resource id or a URL) rim: II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd: Identifier rim: .identifier
id		0..1	string	There are no (further) constraints on this element Element id Location.partOf.identifier.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Location.partOf.identifier.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
use	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element id Location.partOf.identifier.use Short description usual \| official \| temp \| secondary \| old (If known) Definition The purpose of this identifier. Requirements Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. Comments Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. Data type code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: N/A rim: Role.code or implied by context
type	Σ	0..1	CodeableConceptBinding	There are no (further) constraints on this element Element id Location.partOf.identifier.type Short description Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. Requirements Allows users to make use of identifiers when the identifier system is not known. Comments This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. Data type CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD v2: CX.5 rim: Role.code or implied by context
system	Σ	1..1	uri	There are no (further) constraints on this element Element id Location.partOf.identifier.system Short description The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique. Requirements There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. Comments Identifier.system is always case sensitive. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General http://www.acme.com/identifiers/patient Mappings rim: n/a v2: CX.4 / EI-2-4 rim: II.root or Role.id.root servd: ./IdentifierType
value	Σ	1..1	string	There are no (further) constraints on this element Element id Location.partOf.identifier.value Short description The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system. Comments If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General 123456 Mappings rim: n/a v2: CX.1 / EI.1 rim: II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd: ./Value
period	Σ I	0..1	Period	There are no (further) constraints on this element Element id Location.partOf.identifier.period Short description Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use. Comments A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration. Data type Period Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` per-1: If present, start SHALL have a lower value than end `start.hasValue().not() or end.hasValue().not() or (start <= end)` Mappings rim: n/a v2: DR rim: IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"] v2: CX.7 + CX.8 rim: Role.effectiveTime or implied by context servd: ./StartDate and ./EndDate
assigner	Σ I	0..1	Reference(UK Core Organization)	There are no (further) constraints on this element Element id Location.partOf.identifier.assigner Short description Organization that issued id (may be just text) Definition Organization that issued/manages the identifier. Comments The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. Data type Reference(UK Core Organization) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2: CX.4 / (CX.4,CX.9,CX.10) rim: II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd: ./IdentifierIssuingAuthority
display	Σ	0..1	string	There are no (further) constraints on this element Element id Location.partOf.display Short description Text alternative for the resource Definition Plain text narrative that identifies the resource in addition to the resource reference. Comments This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: N/A
hoursOfOperation		0..*	BackboneElement	There are no (further) constraints on this element Element id Location.hoursOfOperation Short description What days/times during a week is this location usually open Definition What days/times during a week is this location usually open. Comments This type of information is commonly found published in directories and on websites informing customers when the facility is available. Specific services within the location may have their own hours which could be shorter (or longer) than the locations hours. Data type BackboneElement Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: .effectiveTime
id		0..1	string	There are no (further) constraints on this element Element id Location.hoursOfOperation.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Location.hoursOfOperation.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id Location.hoursOfOperation.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
daysOfWeek		0..*	codeBinding	There are no (further) constraints on this element Element id Location.hoursOfOperation.daysOfWeek Short description mon \| tue \| wed \| thu \| fri \| sat \| sun Definition Indicates which days of the week are available between the start and end Times. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type code Binding The days of the week. DaysOfWeek (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: .effectiveTime
allDay		0..1	boolean	There are no (further) constraints on this element Element id Location.hoursOfOperation.allDay Short description The Location is open all day Definition The Location is open all day. Data type boolean Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: .effectiveTime
openingTime		0..1	time	There are no (further) constraints on this element Element id Location.hoursOfOperation.openingTime Short description Time that the Location opens Definition Time that the Location opens. Data type time Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: .effectiveTime
closingTime		0..1	time	There are no (further) constraints on this element Element id Location.hoursOfOperation.closingTime Short description Time that the Location closes Definition Time that the Location closes. Data type time Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: .effectiveTime
availabilityExceptions		0..1	string	There are no (further) constraints on this element Element id Location.availabilityExceptions Short description Description of availability exceptions Definition A description of when the locations opening ours are different to normal, e.g. public holiday availability. Succinctly describing all possible exceptions to normal site availability as detailed in the opening hours Times. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
endpoint	I	0..*	Reference(Endpoint)	There are no (further) constraints on this element Element id Location.endpoint Short description Technical endpoints providing access to services operated for the location Definition Technical endpoints providing access to services operated for the location. Requirements Organizations may have different systems at different locations that provide various services and need to be able to define the technical connection details for how to connect to them, and for what purpose. Comments References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository. Data type Reference(Endpoint) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity)
id		0..1	string	There are no (further) constraints on this element Element id Location.endpoint.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Location.endpoint.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
reference	Σ I	0..1	string	There are no (further) constraints on this element Element id Location.endpoint.reference Short description Literal reference, Relative, internal or absolute URL Definition A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources. Comments Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: N/A
type	Σ	0..1	uriBinding	There are no (further) constraints on this element Element id Location.endpoint.type Short description Type the reference refers to (e.g. "Patient") Definition The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent. The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources). Comments This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified. Data type uri Binding Aa resource (or, for logical models, the URI of the logical model). ResourceType (extensible) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: N/A
identifier	Σ	0..1	Identifier	There are no (further) constraints on this element Element id Location.endpoint.identifier Short description Logical reference, when literal reference is not known Definition An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference. Comments When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it. Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation\|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any). Data type Identifier Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: CX / EI (occasionally, more often EI maps to a resource id or a URL) rim: II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd: Identifier rim: .identifier
id		0..1	string	There are no (further) constraints on this element Element id Location.endpoint.identifier.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Location.endpoint.identifier.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
use	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element id Location.endpoint.identifier.use Short description usual \| official \| temp \| secondary \| old (If known) Definition The purpose of this identifier. Requirements Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. Comments Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. Data type code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: N/A rim: Role.code or implied by context
type	Σ	0..1	CodeableConceptBinding	There are no (further) constraints on this element Element id Location.endpoint.identifier.type Short description Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. Requirements Allows users to make use of identifiers when the identifier system is not known. Comments This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. Data type CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD v2: CX.5 rim: Role.code or implied by context
system	Σ	0..1	uri	There are no (further) constraints on this element Element id Location.endpoint.identifier.system Short description The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique. Requirements There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. Comments Identifier.system is always case sensitive. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General http://www.acme.com/identifiers/patient Mappings rim: n/a v2: CX.4 / EI-2-4 rim: II.root or Role.id.root servd: ./IdentifierType
value	Σ	0..1	string	There are no (further) constraints on this element Element id Location.endpoint.identifier.value Short description The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system. Comments If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General 123456 Mappings rim: n/a v2: CX.1 / EI.1 rim: II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd: ./Value
period	Σ I	0..1	Period	There are no (further) constraints on this element Element id Location.endpoint.identifier.period Short description Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use. Comments A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration. Data type Period Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` per-1: If present, start SHALL have a lower value than end `start.hasValue().not() or end.hasValue().not() or (start <= end)` Mappings rim: n/a v2: DR rim: IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"] v2: CX.7 + CX.8 rim: Role.effectiveTime or implied by context servd: ./StartDate and ./EndDate
assigner	Σ I	0..1	Reference(UK Core Organization)	There are no (further) constraints on this element Element id Location.endpoint.identifier.assigner Short description Organization that issued id (may be just text) Definition Organization that issued/manages the identifier. Comments The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. Data type Reference(UK Core Organization) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2: CX.4 / (CX.4,CX.9,CX.10) rim: II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd: ./IdentifierIssuingAuthority
display	Σ	0..1	string	There are no (further) constraints on this element Element id Location.endpoint.display Short description Text alternative for the resource Definition Plain text narrative that identifies the resource in addition to the resource reference. Comments This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: N/A

Example Location - Cadog Ward (GGH)

Example Location - Ward E (NPT)

Mandatory and Must Support Data Elements

Refer to the Mandatory and Must Support page for guidance on how these elements should be interpreted.

Each Location must have:

A name

Each Location must support:

An identifier *
A status of the location (i.e., whether it is active, suspended or inactive)

*see Implementation Guidance for the identifier element below

The Location.identifier field SHOULD contain all available identifiers. Typical identifiers include:

Identifiers assigned to the location by the Welsh Reference Data Service
Other identifiers assigned by a hospital PAS or other clinical system.

The Location.status field SHOULD be populated to indicate whether the organization is active, suspended or inactive.

The Location.name field SHALL be populated.

Slices

The following identifier slice is used with the location profile listed below. The namespaces denoting issuing authority for the identifier are defined on the Naming Systems page.

Location.identifier:wrtsLocationIdentifier