API Name: put-cardiologyreport

This API creates the Cardiology Report record which is associated to an encounter within a patient visit.

Specification

Endpoint	[baseurl]/$put-cardiologyreport
Protocol	HTTPS
HTTP Method	Post
HTTP Header	Content-Type: application/fhir+json

Request Body

Remarks:

(All Slices) is an automatically generated section and should be ignored. Do not pass this as an input parameter. It will also not be part of response.

BundleCardiologyReport (Bundle)	C		Bundle	There are no (further) constraints on this element Element id Bundle Short description Contains a collection of resources Definition A container for a collection of resources. Data type Bundle Constraints bdl-7: FullUrl must be unique in a bundle, or else entries with the same fullUrl must have different meta.versionId (except in history bundles) `(type = 'history') or entry.where(fullUrl.exists()).select(fullUrl&iif(resource.meta.versionId.exists(), resource.meta.versionId, '')).isDistinct()` bdl-9: A document must have an identifier with a system and a value `type = 'document' implies (identifier.system.exists() and identifier.value.exists())` bdl-17: Use and meaning of issues for documents has not been validated because the content will not be rendered in the document. `type = 'document' implies issues.empty()` bdl-16: Issue.severity for all issues within the OperationOutcome must be either 'information' or 'warning'. `issues.exists() implies (issues.issue.severity = 'information' or issues.issue.severity = 'warning')` bdl-18: Self link is required for searchsets. `type = 'searchset' implies link.where(relation = 'self' and url.exists()).exists()` bdl-13: A subscription-notification must have a SubscriptionStatus as the first resource `type = 'subscription-notification' implies entry.first().resource.is(SubscriptionStatus)` bdl-12: A message must have a MessageHeader as the first resource `type = 'message' implies entry.first().resource.is(MessageHeader)` bdl-15: Bundle resources where type is not transaction, transaction-response, batch, or batch-response or when the request is a POST SHALL have Bundle.entry.fullUrl populated `type='transaction' or type='transaction-response' or type='batch' or type='batch-response' or entry.all(fullUrl.exists() or request.method='POST')` bdl-14: entry.request.method PATCH not allowed for history `type = 'history' implies entry.request.method != 'PATCH'` bdl-11: A document must have a Composition as the first resource `type = 'document' implies entry.first().resource.is(Composition)` bdl-10: A document must have a date `type = 'document' implies (timestamp.hasValue())` bdl-3d: For collections of type transaction-response or batch-response, all entries must contain response elements `type in ('transaction-response' \| 'batch-response') implies entry.all(response.exists())` bdl-1: total only when a search or history `total.empty() or (type = 'searchset') or (type = 'history')` bdl-2: entry.search only when a search `(type = 'searchset') or entry.search.empty()` bdl-3a: For collections of type document, message, searchset or collection, all entries must contain resources, and not have request or response elements `type in ('document' \| 'message' \| 'searchset' \| 'collection') implies entry.all(resource.exists() and request.empty() and response.empty())` bdl-3c: For collections of type transaction or batch, all entries must contain request elements, and resources if the method is POST, PUT or PATCH `type in ('transaction' \| 'batch') implies entry.all(request.method.exists() and ((request.method in ('POST' \| 'PATCH' \| 'PUT')) = resource.exists()))` bdl-3b: For collections of type history, all entries must contain request or response elements, and resources if the method is POST, PUT or PATCH `type = 'history' implies entry.all(request.exists() and response.exists() and ((request.method in ('POST' \| 'PATCH' \| 'PUT')) = resource.exists()))` Mappings rim: n/a rim: Entity. Role, or Act w5: infrastructure.structure v2: N/A rim: N/A cda: ClinicalDocument, if bundle.type = document
id	Σ	0..1	id	There are no (further) constraints on this element Element id Bundle.id Short description Logical id of this artifact Definition The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes. Comments Within the context of the FHIR RESTful interactions, the resource has an id except for cases like the create and conditional update. Otherwise, the use of the resouce id depends on the given use case. Data type id
meta	Σ	0..1	Meta	There are no (further) constraints on this element Element id Bundle.meta Short description Metadata about the resource Definition The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource. Data type Meta Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: N/A
implicitRules	Σ ?!	0..1	uri	There are no (further) constraints on this element Element id Bundle.implicitRules Short description A set of rules under which this content was created Definition A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc. Comments Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of its narrative along with other profiles, value sets, etc. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
language		0..1	codeBinding	There are no (further) constraints on this element Element id Bundle.language Short description Language of the resource content Definition The base language in which the resource is written. Comments Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute). Data type code Binding IETF language tag for a human language AllLanguages (required) Additional bindings CommonLanguages (starter) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
identifier	Σ C	0..1	Identifier	There are no (further) constraints on this element Element id Bundle.identifier Short description Persistent identifier for the bundle Definition A persistent identifier for the bundle that won't change as a bundle is copied from server to server. Comments Persistent identity generally only matters for batches of type Document, Message, and Collection. It would not normally be populated for search and history results and servers ignore Bundle.identifier when processing batches and transactions. For Documents the .identifier SHALL be populated such that the .identifier is globally unique. Data type Identifier Conditions The cardinality or value of this element may be affected by these constraints: bdl-9 Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ident-1: Identifier with no value has limited utility. If communicating that an identifier value has been suppressed or missing, the value element SHOULD be present with an extension indicating the missing semantic - e.g. data-absent-reason `value.exists()` Mappings rim: n/a v2: CX / EI (occasionally, more often EI maps to a resource id or a URL) rim: II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd: Identifier w5: FiveWs.identifier cda: ClinicalDocument.id
type	Σ C	1..1	codeBindingFixed Value	Element id Bundle.type Short description document \| message \| transaction \| transaction-response \| batch \| batch-response \| history \| searchset \| collection \| subscription-notification Definition Indicates the purpose of this bundle - how it is intended to be used. Comments It's possible to use a bundle for other purposes (e.g. a document can be accepted as a transaction). This is primarily defined so that there can be specific rules for some of the bundle types. Data type code Binding Indicates the purpose of a bundle - how it is intended to be used. BundleType (required) Conditions The cardinality or value of this element may be affected by these constraints: bdl-1, bdl-2, bdl-3a, bdl-3b, bdl-3c, bdl-3d, bdl-7, bdl-9, bdl-10, bdl-11, bdl-12, bdl-13, bdl-14, bdl-15, bdl-17, bdl-18 Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Fixed value transaction Mappings rim: n/a w5: FiveWs.class
timestamp	Σ C	0..1	instant	There are no (further) constraints on this element Element id Bundle.timestamp Short description When the bundle was assembled Definition The date/time that the bundle was assembled - i.e. when the resources were placed in the bundle. Comments For many bundles, the timestamp is equal to .meta.lastUpdated, because they are not stored (e.g. search results). When a bundle is placed in a persistent store, .meta.lastUpdated will be usually be changed by the server. When the bundle is a message, a middleware agent altering the message (even if not stored) SHOULD update .meta.lastUpdated. .timestamp is used to track the original time of the Bundle, and SHOULD be populated. Usage: document : the date the document was created. Note: the composition may predate the document, or be associated with multiple documents. The date of the composition - the authoring time - may be earlier than the document assembly time message : the date that the content of the message was assembled. This date is not changed by middleware engines unless they add additional data that changes the meaning of the time of the message history : the date that the history was assembled. This time would be used as the _since time to ask for subsequent updates searchset : the time that the search set was assembled. Note that different pages MAY have different timestamps but need not. Having different timestamps does not imply that subsequent pages will represent or include changes made since the initial query transaction \| transaction-response \| batch \| batch-response \| collection : no particular assigned meaning The timestamp value should be greater than the lastUpdated and other timestamps in the resources in the bundle, and it should be equal or earlier than the .meta.lastUpdated on the Bundle itself. Data type instant Conditions The cardinality or value of this element may be affected by these constraints: bdl-10 Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a w5: FiveWs.init cda: ClinicalDocument.effectiveTime
total	Σ C	0..1	unsignedInt	There are no (further) constraints on this element Element id Bundle.total Short description If search, the total number of matches Definition If a set of search matches, this is the (potentially estimated) total number of entries of type 'match' across all pages in the search. It does not include search.mode = 'include' or 'outcome' entries and it does not provide a count of the number of entries in the Bundle. Comments Only used if the bundle is a search result set. The total does not include resources such as OperationOutcome and included resources, only the total number of matching resources. Data type unsignedInt Conditions The cardinality or value of this element may be affected by these constraints: bdl-1 Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
link	Σ C	0..*	BackboneElement	There are no (further) constraints on this element Element id Bundle.link Short description Links related to this Bundle Definition A series of links that provide context to this bundle. Comments Both Bundle.link and Bundle.entry.link are defined to support providing additional context when Bundles are used (e.g. HATEOAS). Bundle.entry.link corresponds to links found in the HTTP header if the resource in the entry was read directly. This specification defines some specific uses of Bundle.link for searching and paging, but no specific uses for Bundle.entry.link, and no defined function in a transaction - the meaning is implementation specific. The behavior of navigation link types (next/prev/first/last) are well defined for searchset and history Bundles but are not currently defined for other types. Implementers who choose to use such link relationships for other bundle types will need to negotiate behavior with their interoperability partners. Data type BackboneElement Conditions The cardinality or value of this element may be affected by these constraints: bdl-18 Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
id		0..1	string	There are no (further) constraints on this element Element id Bundle.link.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Conditions The cardinality or value of this element may be affected by these constraints: ele-1 Mappings rim: n/a
extension	C	0..*	Extension	There are no (further) constraints on this element Element id Bundle.link.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Slicing Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! C	0..*	Extension	There are no (further) constraints on this element Element id Bundle.link.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
relation	Σ C	1..1	codeBinding	There are no (further) constraints on this element Element id Bundle.link.relation Short description See http://www.iana.org/assignments/link-relations/link-relations.xhtml#link-relations-1 Definition A name which details the functional use for this link - see http://www.iana.org/assignments/link-relations/link-relations.xhtml#link-relations-1. Comments Note that FHIR strings SHALL NOT exceed 1,048,576 (10241024) characters in size Data type* code Binding LinkRelationTypes (required) Conditions The cardinality or value of this element may be affected by these constraints: bdl-18 Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
url	Σ C	1..1	uri	There are no (further) constraints on this element Element id Bundle.link.url Short description Reference details for the link Definition The reference details for the link. Comments see http://en.wikipedia.org/wiki/Uniform_resource_identifier Data type uri Conditions The cardinality or value of this element may be affected by these constraints: bdl-18 Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
entry	Σ C	1..*	BackboneElement	Element id Bundle.entry Short description Entry in the bundle - will have a resource or information Definition An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only). Data type BackboneElement Slicing Unordered, Open, by fullUrl(Value) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` bdl-8: fullUrl cannot be a version specific reference `fullUrl.exists() implies fullUrl.contains('/_history/').not()` bdl-5: must be a resource unless there's a request or response `resource.exists() or request.exists() or response.exists()` Mappings rim: n/a
(All Slices)				The requirements in this element apply to all slices
id		0..1	string	There are no (further) constraints on this element Element id Bundle.entry.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Conditions The cardinality or value of this element may be affected by these constraints: ele-1 Mappings rim: n/a
extension	C	0..*	Extension	There are no (further) constraints on this element Element id Bundle.entry.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Slicing Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! C	0..*	Extension	There are no (further) constraints on this element Element id Bundle.entry.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
link	Σ	0..*	see (link)	There are no (further) constraints on this element Element id Bundle.entry.link Short description Links related to this entry Definition A series of links that provide context to this entry.
fullUrl	Σ C	0..1	uri	There are no (further) constraints on this element Element id Bundle.entry.fullUrl Short description URI for resource (e.g. the absolute URL server address, URI for UUID/OID, etc.) Definition The Absolute URL for the resource. Except for transactions and batches, each entry in a Bundle must have a fullUrl. The fullUrl SHALL NOT disagree with the id in the resource - i.e. if the fullUrl is not a urn:uuid, the URL shall be version-independent URL consistent with the Resource.id. The fullUrl is a version independent reference to the resource. Even when not required, fullUrl MAY be set to a urn:uuid to allow referencing entries in a transaction. The fullUrl can be an arbitrary URI and is not limited to urn:uuid, urn:oid, http, and https. The fullUrl element SHALL have a value except when: invoking a create invoking or responding to an operation where the body is not a single identified resource invoking or returning the results of a search or history operation. Comments fullUrl might not be unique in the context of a resource. Note that since FHIR resources do not need to be served through the FHIR API, the fullURL might be a URN or an absolute URL that does not end with the logical id of the resource (Resource.id). However, but if the fullUrl does look like a RESTful server URL (e.g. meets the regex, then the 'id' portion of the fullUrl SHALL end with the Resource.id. Note that the fullUrl is not the same as the canonical URL - it's an absolute url for an endpoint serving the resource (these will happen to have the same value on the canonical server for the resource with the canonical URL). Data type uri Conditions The cardinality or value of this element may be affected by these constraints: bdl-7, bdl-15, bdl-8 Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
resource	Σ C	0..1	Resource	There are no (further) constraints on this element Element id Bundle.entry.resource Short description A resource in the bundle Definition The Resource for the entry. The purpose/meaning of the resource is determined by the Bundle.type. This is allowed to be a Parameters resource if and only if it is referenced by something else within the Bundle that provides context/meaning. Data type Resource Conditions The cardinality or value of this element may be affected by these constraints: bdl-3a, bdl-3b, bdl-3c, bdl-7, bdl-11, bdl-12, bdl-13, bdl-5 Mappings rim: n/a rim: Entity. Role, or Act
search	Σ C	0..1	BackboneElement	There are no (further) constraints on this element Element id Bundle.entry.search Short description Search related information Definition Information about the search process that lead to the creation of this entry. Data type BackboneElement Conditions The cardinality or value of this element may be affected by these constraints: bdl-2 Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
id		0..1	string	There are no (further) constraints on this element Element id Bundle.entry.search.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Conditions The cardinality or value of this element may be affected by these constraints: ele-1 Mappings rim: n/a
extension	C	0..*	Extension	There are no (further) constraints on this element Element id Bundle.entry.search.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Slicing Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! C	0..*	Extension	There are no (further) constraints on this element Element id Bundle.entry.search.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
mode	Σ	0..1	codeBinding	There are no (further) constraints on this element Element id Bundle.entry.search.mode Short description match \| include - why this is in the result set Definition Why this entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process. Comments There is only one mode. In some corner cases, a resource may be included because it is both a match and an include. In these circumstances, 'match' takes precedence. Data type code Binding Why an entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process. SearchEntryMode (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
score	Σ	0..1	decimal	There are no (further) constraints on this element Element id Bundle.entry.search.score Short description Search ranking (between 0 and 1) Definition When searching, the server's search ranking score for the entry. Comments Servers are not required to return a ranking score. 1 is most relevant, and 0 is least relevant. Often, search results are sorted by score, but the client may specify a different sort order. See Patient Match for the EMPI search which relates to this element. Data type decimal Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
request	Σ C	0..1	BackboneElement	There are no (further) constraints on this element Element id Bundle.entry.request Short description Additional execution information (transaction/batch/history) Definition Additional information about how this entry should be processed as part of a transaction or batch. For history, it shows how the entry was processed to create the version contained in the entry. Data type BackboneElement Conditions The cardinality or value of this element may be affected by these constraints: bdl-3a, bdl-3b, bdl-5 Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
id		0..1	string	There are no (further) constraints on this element Element id Bundle.entry.request.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Conditions The cardinality or value of this element may be affected by these constraints: ele-1 Mappings rim: n/a
extension	C	0..*	Extension	There are no (further) constraints on this element Element id Bundle.entry.request.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Slicing Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! C	0..*	Extension	There are no (further) constraints on this element Element id Bundle.entry.request.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
method	Σ C	1..1	codeBinding	There are no (further) constraints on this element Element id Bundle.entry.request.method Short description GET \| HEAD \| POST \| PUT \| DELETE \| PATCH Definition In a transaction or batch, this is the HTTP action to be executed for this entry. In a history bundle, this indicates the HTTP action that occurred. Comments Note that FHIR strings SHALL NOT exceed 1,048,576 (10241024) characters in size Data type* code Binding HTTP verbs (in the HTTP command line). See HTTP rfc for details. HTTPVerb (required) Conditions The cardinality or value of this element may be affected by these constraints: bdl-3b, bdl-3c, bdl-14, bdl-15 Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
url	Σ	1..1	uri	There are no (further) constraints on this element Element id Bundle.entry.request.url Short description URL for HTTP equivalent of this entry Definition The URL for this entry, relative to the root (the address to which the request is posted). Comments E.g. for a Patient Create, the method would be "POST" and the URL would be "Patient". For a Patient Update, the method would be PUT and the URL would be "Patient/[id]". Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
ifNoneMatch	Σ	0..1	string	There are no (further) constraints on this element Element id Bundle.entry.request.ifNoneMatch Short description For managing cache validation Definition If the ETag values match, return a 304 Not Modified status. See the API documentation for "Conditional Read". Comments Note that FHIR strings SHALL NOT exceed 1,048,576 (10241024) characters in size Data type* string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
ifModifiedSince	Σ	0..1	instant	There are no (further) constraints on this element Element id Bundle.entry.request.ifModifiedSince Short description For managing cache currency Definition Only perform the operation if the last updated date matches. See the API documentation for "Conditional Read". Comments Note: This is intended for where precisely observed times are required, typically system logs etc., and not human-reported times - for them, see date and dateTime (which can be as precise as instant, but is not required to be) below. UTC offset is always required Data type instant Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
ifMatch	Σ	0..1	string	There are no (further) constraints on this element Element id Bundle.entry.request.ifMatch Short description For managing update contention Definition Only perform the operation if the Etag value matches. For more information, see the API section "Managing Resource Contention". Comments Note that FHIR strings SHALL NOT exceed 1,048,576 (10241024) characters in size Data type* string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
ifNoneExist	Σ	0..1	string	There are no (further) constraints on this element Element id Bundle.entry.request.ifNoneExist Short description For conditional creates Definition Instruct the server not to perform the create if a specified resource already exists. For further information, see the API documentation for "Conditional Create". This is just the query portion of the URL - what follows the "?" (not including the "?"). Comments Note that FHIR strings SHALL NOT exceed 1,048,576 (10241024) characters in size Data type* string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
response	Σ C	0..1	BackboneElement	There are no (further) constraints on this element Element id Bundle.entry.response Short description Results of execution (transaction/batch/history) Definition Indicates the results of processing the corresponding 'request' entry in the batch or transaction being responded to or what the results of an operation where when returning history. Data type BackboneElement Conditions The cardinality or value of this element may be affected by these constraints: bdl-3a, bdl-3b, bdl-3d, bdl-5 Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
id		0..1	string	There are no (further) constraints on this element Element id Bundle.entry.response.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Conditions The cardinality or value of this element may be affected by these constraints: ele-1 Mappings rim: n/a
extension	C	0..*	Extension	There are no (further) constraints on this element Element id Bundle.entry.response.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Slicing Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! C	0..*	Extension	There are no (further) constraints on this element Element id Bundle.entry.response.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
status	Σ	1..1	string	There are no (further) constraints on this element Element id Bundle.entry.response.status Short description Status response code (text optional) Definition The status code returned by processing this entry. The status SHALL start with a 3 digit HTTP code (e.g. 404) and may contain the standard HTTP description associated with the status code. Comments Note that FHIR strings SHALL NOT exceed 1,048,576 (10241024) characters in size Data type* string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
location	Σ	0..1	uri	There are no (further) constraints on this element Element id Bundle.entry.response.location Short description The location (if the operation returns a location) Definition The location header created by processing this operation, populated if the operation returns a location. Comments see http://en.wikipedia.org/wiki/Uniform_resource_identifier Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
etag	Σ	0..1	string	There are no (further) constraints on this element Element id Bundle.entry.response.etag Short description The Etag for the resource (if relevant) Definition The Etag for the resource, if the operation for the entry produced a versioned resource (see Resource Metadata and Versioning and Managing Resource Contention). Comments Etags match the Resource.meta.versionId. The ETag has to match the version id in the header if a resource is included. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
lastModified	Σ	0..1	instant	There are no (further) constraints on this element Element id Bundle.entry.response.lastModified Short description Server's date time modified Definition The date/time that the resource was modified on the server. Comments This has to match the same time in the meta header (meta.lastUpdated) if a resource is included. Data type instant Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
outcome	Σ	0..1	Resource	There are no (further) constraints on this element Element id Bundle.entry.response.outcome Short description OperationOutcome with hints and warnings (for batch/transaction) Definition An OperationOutcome containing hints and warnings produced as part of processing this entry in a batch or transaction. Comments For a POST/PUT operation, this is the equivalent outcome that would be returned for prefer = operationoutcome - except that the resource is always returned whether or not the outcome is returned. This outcome is not used for error responses in batch/transaction, only for hints and warnings. In a batch operation, the error will be in Bundle.entry.response, and for transaction, there will be a single OperationOutcome instead of a bundle in the case of an error. Data type Resource Mappings rim: n/a rim: Entity. Role, or Act
cardiologyreport	Σ C	1..1	BackboneElement	There are no (further) constraints on this element Element id Bundle.entry:cardiologyreport Short description Entry in the bundle - will have a resource or information Definition An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only). Data type BackboneElement Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` bdl-8: fullUrl cannot be a version specific reference `fullUrl.exists() implies fullUrl.contains('/_history/').not()` bdl-5: must be a resource unless there's a request or response `resource.exists() or request.exists() or response.exists()` Mappings rim: n/a
id		0..1	string	There are no (further) constraints on this element Element id Bundle.entry:cardiologyreport.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Conditions The cardinality or value of this element may be affected by these constraints: ele-1 Mappings rim: n/a
extension	C	0..*	Extension	There are no (further) constraints on this element Element id Bundle.entry:cardiologyreport.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Slicing Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! C	0..*	Extension	There are no (further) constraints on this element Element id Bundle.entry:cardiologyreport.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
link	Σ	0..*	see (link)	There are no (further) constraints on this element Element id Bundle.entry:cardiologyreport.link Short description Links related to this entry Definition A series of links that provide context to this entry.
fullUrl	Σ C	0..1	uri	There are no (further) constraints on this element Element id Bundle.entry:cardiologyreport.fullUrl Short description URI for resource (e.g. the absolute URL server address, URI for UUID/OID, etc.) Definition The Absolute URL for the resource. Except for transactions and batches, each entry in a Bundle must have a fullUrl. The fullUrl SHALL NOT disagree with the id in the resource - i.e. if the fullUrl is not a urn:uuid, the URL shall be version-independent URL consistent with the Resource.id. The fullUrl is a version independent reference to the resource. Even when not required, fullUrl MAY be set to a urn:uuid to allow referencing entries in a transaction. The fullUrl can be an arbitrary URI and is not limited to urn:uuid, urn:oid, http, and https. The fullUrl element SHALL have a value except when: invoking a create invoking or responding to an operation where the body is not a single identified resource invoking or returning the results of a search or history operation. Comments fullUrl might not be unique in the context of a resource. Note that since FHIR resources do not need to be served through the FHIR API, the fullURL might be a URN or an absolute URL that does not end with the logical id of the resource (Resource.id). However, but if the fullUrl does look like a RESTful server URL (e.g. meets the regex, then the 'id' portion of the fullUrl SHALL end with the Resource.id. Note that the fullUrl is not the same as the canonical URL - it's an absolute url for an endpoint serving the resource (these will happen to have the same value on the canonical server for the resource with the canonical URL). Data type uri Conditions The cardinality or value of this element may be affected by these constraints: bdl-7, bdl-15, bdl-8 Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
resource	Σ C	0..1	CardiologyReport	Element id Bundle.entry:cardiologyreport.resource Short description A set of resources composed into a single coherent clinical statement with clinical attestation Definition A set of healthcare-related information that is assembled together into a single logical package that provides a single coherent statement of meaning, establishes its own context and that has clinical attestation with regard to who is making the statement. A Composition defines the structure and narrative content necessary for a document. However, a Composition alone does not constitute a document. Rather, the Composition must be the first entry in a Bundle where Bundle.type=document, and any other resources referenced from Composition must be included as subsequent entries in the Bundle (for example Patient, Practitioner, Encounter, etc.). Comments While the focus of this specification is on patient-specific clinical statements, this resource can also apply to other healthcare-related statements such as study protocol designs, healthcare invoices and other activities that are not necessarily patient-specific or clinical. Data type CardiologyReport Conditions The cardinality or value of this element may be affected by these constraints: bdl-3a, bdl-3b, bdl-3c, bdl-7, bdl-11, bdl-12, bdl-13, bdl-5 Constraints dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources `contained.contained.empty()` dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated `contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()` dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource `contained.where((('#'+id in (%resource.descendants().reference \| %resource.descendants().ofType(canonical) \| %resource.descendants().ofType(uri) \| %resource.descendants().ofType(url))) or descendants().where(reference = '#').exists() or descendants().where(ofType(canonical) = '#').exists() or descendants().where(ofType(canonical) = '#').exists()).not()).trace('unmatched', id).empty()` dom-6: A resource should have narrative for robust management text.`div`.exists() dom-5: If a resource is contained in another resource, it SHALL NOT have a security label `contained.meta.security.empty()` Mappings rim: n/a rim: Entity. Role, or Act rim: Entity, Role, or Act workflow: Event w5: infrastructure.documents rim: Document[classCode="DOC" and moodCode="EVN" and isNormalAct()] cda: ClinicalDocument fhirdocumentreference: when described by DocumentReference
search	Σ C	0..1	BackboneElement	There are no (further) constraints on this element Element id Bundle.entry:cardiologyreport.search Short description Search related information Definition Information about the search process that lead to the creation of this entry. Data type BackboneElement Conditions The cardinality or value of this element may be affected by these constraints: bdl-2 Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
id		0..1	string	There are no (further) constraints on this element Element id Bundle.entry:cardiologyreport.search.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Conditions The cardinality or value of this element may be affected by these constraints: ele-1 Mappings rim: n/a
extension	C	0..*	Extension	There are no (further) constraints on this element Element id Bundle.entry:cardiologyreport.search.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Slicing Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! C	0..*	Extension	There are no (further) constraints on this element Element id Bundle.entry:cardiologyreport.search.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
mode	Σ	0..1	codeBinding	There are no (further) constraints on this element Element id Bundle.entry:cardiologyreport.search.mode Short description match \| include - why this is in the result set Definition Why this entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process. Comments There is only one mode. In some corner cases, a resource may be included because it is both a match and an include. In these circumstances, 'match' takes precedence. Data type code Binding Why an entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process. SearchEntryMode (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
score	Σ	0..1	decimal	There are no (further) constraints on this element Element id Bundle.entry:cardiologyreport.search.score Short description Search ranking (between 0 and 1) Definition When searching, the server's search ranking score for the entry. Comments Servers are not required to return a ranking score. 1 is most relevant, and 0 is least relevant. Often, search results are sorted by score, but the client may specify a different sort order. See Patient Match for the EMPI search which relates to this element. Data type decimal Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
request	Σ C	0..1	BackboneElement	There are no (further) constraints on this element Element id Bundle.entry:cardiologyreport.request Short description Additional execution information (transaction/batch/history) Definition Additional information about how this entry should be processed as part of a transaction or batch. For history, it shows how the entry was processed to create the version contained in the entry. Data type BackboneElement Conditions The cardinality or value of this element may be affected by these constraints: bdl-3a, bdl-3b, bdl-5 Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
id		0..1	string	There are no (further) constraints on this element Element id Bundle.entry:cardiologyreport.request.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Conditions The cardinality or value of this element may be affected by these constraints: ele-1 Mappings rim: n/a
extension	C	0..*	Extension	There are no (further) constraints on this element Element id Bundle.entry:cardiologyreport.request.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Slicing Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! C	0..*	Extension	There are no (further) constraints on this element Element id Bundle.entry:cardiologyreport.request.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
method	Σ C	1..1	codeBinding	There are no (further) constraints on this element Element id Bundle.entry:cardiologyreport.request.method Short description GET \| HEAD \| POST \| PUT \| DELETE \| PATCH Definition In a transaction or batch, this is the HTTP action to be executed for this entry. In a history bundle, this indicates the HTTP action that occurred. Comments Note that FHIR strings SHALL NOT exceed 1,048,576 (10241024) characters in size Data type* code Binding HTTP verbs (in the HTTP command line). See HTTP rfc for details. HTTPVerb (required) Conditions The cardinality or value of this element may be affected by these constraints: bdl-3b, bdl-3c, bdl-14, bdl-15 Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
url	Σ	1..1	uri	There are no (further) constraints on this element Element id Bundle.entry:cardiologyreport.request.url Short description URL for HTTP equivalent of this entry Definition The URL for this entry, relative to the root (the address to which the request is posted). Comments E.g. for a Patient Create, the method would be "POST" and the URL would be "Patient". For a Patient Update, the method would be PUT and the URL would be "Patient/[id]". Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
ifNoneMatch	Σ	0..1	string	There are no (further) constraints on this element Element id Bundle.entry:cardiologyreport.request.ifNoneMatch Short description For managing cache validation Definition If the ETag values match, return a 304 Not Modified status. See the API documentation for "Conditional Read". Comments Note that FHIR strings SHALL NOT exceed 1,048,576 (10241024) characters in size Data type* string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
ifModifiedSince	Σ	0..1	instant	There are no (further) constraints on this element Element id Bundle.entry:cardiologyreport.request.ifModifiedSince Short description For managing cache currency Definition Only perform the operation if the last updated date matches. See the API documentation for "Conditional Read". Comments Note: This is intended for where precisely observed times are required, typically system logs etc., and not human-reported times - for them, see date and dateTime (which can be as precise as instant, but is not required to be) below. UTC offset is always required Data type instant Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
ifMatch	Σ	0..1	string	There are no (further) constraints on this element Element id Bundle.entry:cardiologyreport.request.ifMatch Short description For managing update contention Definition Only perform the operation if the Etag value matches. For more information, see the API section "Managing Resource Contention". Comments Note that FHIR strings SHALL NOT exceed 1,048,576 (10241024) characters in size Data type* string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
ifNoneExist	Σ	0..1	string	There are no (further) constraints on this element Element id Bundle.entry:cardiologyreport.request.ifNoneExist Short description For conditional creates Definition Instruct the server not to perform the create if a specified resource already exists. For further information, see the API documentation for "Conditional Create". This is just the query portion of the URL - what follows the "?" (not including the "?"). Comments Note that FHIR strings SHALL NOT exceed 1,048,576 (10241024) characters in size Data type* string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
response	Σ C	0..1	BackboneElement	There are no (further) constraints on this element Element id Bundle.entry:cardiologyreport.response Short description Results of execution (transaction/batch/history) Definition Indicates the results of processing the corresponding 'request' entry in the batch or transaction being responded to or what the results of an operation where when returning history. Data type BackboneElement Conditions The cardinality or value of this element may be affected by these constraints: bdl-3a, bdl-3b, bdl-3d, bdl-5 Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
id		0..1	string	There are no (further) constraints on this element Element id Bundle.entry:cardiologyreport.response.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Conditions The cardinality or value of this element may be affected by these constraints: ele-1 Mappings rim: n/a
extension	C	0..*	Extension	There are no (further) constraints on this element Element id Bundle.entry:cardiologyreport.response.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Slicing Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! C	0..*	Extension	There are no (further) constraints on this element Element id Bundle.entry:cardiologyreport.response.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
status	Σ	1..1	string	There are no (further) constraints on this element Element id Bundle.entry:cardiologyreport.response.status Short description Status response code (text optional) Definition The status code returned by processing this entry. The status SHALL start with a 3 digit HTTP code (e.g. 404) and may contain the standard HTTP description associated with the status code. Comments Note that FHIR strings SHALL NOT exceed 1,048,576 (10241024) characters in size Data type* string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
location	Σ	0..1	uri	There are no (further) constraints on this element Element id Bundle.entry:cardiologyreport.response.location Short description The location (if the operation returns a location) Definition The location header created by processing this operation, populated if the operation returns a location. Comments see http://en.wikipedia.org/wiki/Uniform_resource_identifier Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
etag	Σ	0..1	string	There are no (further) constraints on this element Element id Bundle.entry:cardiologyreport.response.etag Short description The Etag for the resource (if relevant) Definition The Etag for the resource, if the operation for the entry produced a versioned resource (see Resource Metadata and Versioning and Managing Resource Contention). Comments Etags match the Resource.meta.versionId. The ETag has to match the version id in the header if a resource is included. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
lastModified	Σ	0..1	instant	There are no (further) constraints on this element Element id Bundle.entry:cardiologyreport.response.lastModified Short description Server's date time modified Definition The date/time that the resource was modified on the server. Comments This has to match the same time in the meta header (meta.lastUpdated) if a resource is included. Data type instant Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
outcome	Σ	0..1	Resource	There are no (further) constraints on this element Element id Bundle.entry:cardiologyreport.response.outcome Short description OperationOutcome with hints and warnings (for batch/transaction) Definition An OperationOutcome containing hints and warnings produced as part of processing this entry in a batch or transaction. Comments For a POST/PUT operation, this is the equivalent outcome that would be returned for prefer = operationoutcome - except that the resource is always returned whether or not the outcome is returned. This outcome is not used for error responses in batch/transaction, only for hints and warnings. In a batch operation, the error will be in Bundle.entry.response, and for transaction, there will be a single OperationOutcome instead of a bundle in the case of an error. Data type Resource Mappings rim: n/a rim: Entity. Role, or Act
procedure	Σ C	1..*	BackboneElement	There are no (further) constraints on this element Element id Bundle.entry:procedure Short description Entry in the bundle - will have a resource or information Definition An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only). Data type BackboneElement Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` bdl-8: fullUrl cannot be a version specific reference `fullUrl.exists() implies fullUrl.contains('/_history/').not()` bdl-5: must be a resource unless there's a request or response `resource.exists() or request.exists() or response.exists()` Mappings rim: n/a
id		0..1	string	There are no (further) constraints on this element Element id Bundle.entry:procedure.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Conditions The cardinality or value of this element may be affected by these constraints: ele-1 Mappings rim: n/a
extension	C	0..*	Extension	There are no (further) constraints on this element Element id Bundle.entry:procedure.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Slicing Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! C	0..*	Extension	There are no (further) constraints on this element Element id Bundle.entry:procedure.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
link	Σ	0..*	see (link)	There are no (further) constraints on this element Element id Bundle.entry:procedure.link Short description Links related to this entry Definition A series of links that provide context to this entry.
fullUrl	Σ C	0..1	uri	There are no (further) constraints on this element Element id Bundle.entry:procedure.fullUrl Short description URI for resource (e.g. the absolute URL server address, URI for UUID/OID, etc.) Definition The Absolute URL for the resource. Except for transactions and batches, each entry in a Bundle must have a fullUrl. The fullUrl SHALL NOT disagree with the id in the resource - i.e. if the fullUrl is not a urn:uuid, the URL shall be version-independent URL consistent with the Resource.id. The fullUrl is a version independent reference to the resource. Even when not required, fullUrl MAY be set to a urn:uuid to allow referencing entries in a transaction. The fullUrl can be an arbitrary URI and is not limited to urn:uuid, urn:oid, http, and https. The fullUrl element SHALL have a value except when: invoking a create invoking or responding to an operation where the body is not a single identified resource invoking or returning the results of a search or history operation. Comments fullUrl might not be unique in the context of a resource. Note that since FHIR resources do not need to be served through the FHIR API, the fullURL might be a URN or an absolute URL that does not end with the logical id of the resource (Resource.id). However, but if the fullUrl does look like a RESTful server URL (e.g. meets the regex, then the 'id' portion of the fullUrl SHALL end with the Resource.id. Note that the fullUrl is not the same as the canonical URL - it's an absolute url for an endpoint serving the resource (these will happen to have the same value on the canonical server for the resource with the canonical URL). Data type uri Conditions The cardinality or value of this element may be affected by these constraints: bdl-7, bdl-15, bdl-8 Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
resource	Σ C	0..1	Procedure	Element id Bundle.entry:procedure.resource Short description An action that is being or was performed on an individual or entity Definition An action that is or was performed on or for a patient, practitioner, device, organization, or location. For example, this can be a physical intervention on a patient like an operation, or less invasive like long term services, counseling, or hypnotherapy. This can be a quality or safety inspection for a location, organization, or device. This can be an accreditation procedure on a practitioner for licensing. Data type Procedure Conditions The cardinality or value of this element may be affected by these constraints: bdl-3a, bdl-3b, bdl-3c, bdl-7, bdl-11, bdl-12, bdl-13, bdl-5 Constraints dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources `contained.contained.empty()` dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated `contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()` dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource `contained.where((('#'+id in (%resource.descendants().reference \| %resource.descendants().ofType(canonical) \| %resource.descendants().ofType(uri) \| %resource.descendants().ofType(url))) or descendants().where(reference = '#').exists() or descendants().where(ofType(canonical) = '#').exists() or descendants().where(ofType(canonical) = '#').exists()).not()).trace('unmatched', id).empty()` dom-6: A resource should have narrative for robust management text.`div`.exists() dom-5: If a resource is contained in another resource, it SHALL NOT have a security label `contained.meta.security.empty()` Mappings rim: n/a rim: Entity. Role, or Act rim: Entity, Role, or Act workflow: Event w5: clinical.general rim: Procedure[moodCode=EVN]
search	Σ C	0..1	BackboneElement	There are no (further) constraints on this element Element id Bundle.entry:procedure.search Short description Search related information Definition Information about the search process that lead to the creation of this entry. Data type BackboneElement Conditions The cardinality or value of this element may be affected by these constraints: bdl-2 Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
id		0..1	string	There are no (further) constraints on this element Element id Bundle.entry:procedure.search.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Conditions The cardinality or value of this element may be affected by these constraints: ele-1 Mappings rim: n/a
extension	C	0..*	Extension	There are no (further) constraints on this element Element id Bundle.entry:procedure.search.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Slicing Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! C	0..*	Extension	There are no (further) constraints on this element Element id Bundle.entry:procedure.search.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
mode	Σ	0..1	codeBinding	There are no (further) constraints on this element Element id Bundle.entry:procedure.search.mode Short description match \| include - why this is in the result set Definition Why this entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process. Comments There is only one mode. In some corner cases, a resource may be included because it is both a match and an include. In these circumstances, 'match' takes precedence. Data type code Binding Why an entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process. SearchEntryMode (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
score	Σ	0..1	decimal	There are no (further) constraints on this element Element id Bundle.entry:procedure.search.score Short description Search ranking (between 0 and 1) Definition When searching, the server's search ranking score for the entry. Comments Servers are not required to return a ranking score. 1 is most relevant, and 0 is least relevant. Often, search results are sorted by score, but the client may specify a different sort order. See Patient Match for the EMPI search which relates to this element. Data type decimal Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
request	Σ C	0..1	BackboneElement	There are no (further) constraints on this element Element id Bundle.entry:procedure.request Short description Additional execution information (transaction/batch/history) Definition Additional information about how this entry should be processed as part of a transaction or batch. For history, it shows how the entry was processed to create the version contained in the entry. Data type BackboneElement Conditions The cardinality or value of this element may be affected by these constraints: bdl-3a, bdl-3b, bdl-5 Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
id		0..1	string	There are no (further) constraints on this element Element id Bundle.entry:procedure.request.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Conditions The cardinality or value of this element may be affected by these constraints: ele-1 Mappings rim: n/a
extension	C	0..*	Extension	There are no (further) constraints on this element Element id Bundle.entry:procedure.request.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Slicing Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! C	0..*	Extension	There are no (further) constraints on this element Element id Bundle.entry:procedure.request.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
method	Σ C	1..1	codeBinding	There are no (further) constraints on this element Element id Bundle.entry:procedure.request.method Short description GET \| HEAD \| POST \| PUT \| DELETE \| PATCH Definition In a transaction or batch, this is the HTTP action to be executed for this entry. In a history bundle, this indicates the HTTP action that occurred. Comments Note that FHIR strings SHALL NOT exceed 1,048,576 (10241024) characters in size Data type* code Binding HTTP verbs (in the HTTP command line). See HTTP rfc for details. HTTPVerb (required) Conditions The cardinality or value of this element may be affected by these constraints: bdl-3b, bdl-3c, bdl-14, bdl-15 Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
url	Σ	1..1	uri	There are no (further) constraints on this element Element id Bundle.entry:procedure.request.url Short description URL for HTTP equivalent of this entry Definition The URL for this entry, relative to the root (the address to which the request is posted). Comments E.g. for a Patient Create, the method would be "POST" and the URL would be "Patient". For a Patient Update, the method would be PUT and the URL would be "Patient/[id]". Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
ifNoneMatch	Σ	0..1	string	There are no (further) constraints on this element Element id Bundle.entry:procedure.request.ifNoneMatch Short description For managing cache validation Definition If the ETag values match, return a 304 Not Modified status. See the API documentation for "Conditional Read". Comments Note that FHIR strings SHALL NOT exceed 1,048,576 (10241024) characters in size Data type* string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
ifModifiedSince	Σ	0..1	instant	There are no (further) constraints on this element Element id Bundle.entry:procedure.request.ifModifiedSince Short description For managing cache currency Definition Only perform the operation if the last updated date matches. See the API documentation for "Conditional Read". Comments Note: This is intended for where precisely observed times are required, typically system logs etc., and not human-reported times - for them, see date and dateTime (which can be as precise as instant, but is not required to be) below. UTC offset is always required Data type instant Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
ifMatch	Σ	0..1	string	There are no (further) constraints on this element Element id Bundle.entry:procedure.request.ifMatch Short description For managing update contention Definition Only perform the operation if the Etag value matches. For more information, see the API section "Managing Resource Contention". Comments Note that FHIR strings SHALL NOT exceed 1,048,576 (10241024) characters in size Data type* string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
ifNoneExist	Σ	0..1	string	There are no (further) constraints on this element Element id Bundle.entry:procedure.request.ifNoneExist Short description For conditional creates Definition Instruct the server not to perform the create if a specified resource already exists. For further information, see the API documentation for "Conditional Create". This is just the query portion of the URL - what follows the "?" (not including the "?"). Comments Note that FHIR strings SHALL NOT exceed 1,048,576 (10241024) characters in size Data type* string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
response	Σ C	0..1	BackboneElement	There are no (further) constraints on this element Element id Bundle.entry:procedure.response Short description Results of execution (transaction/batch/history) Definition Indicates the results of processing the corresponding 'request' entry in the batch or transaction being responded to or what the results of an operation where when returning history. Data type BackboneElement Conditions The cardinality or value of this element may be affected by these constraints: bdl-3a, bdl-3b, bdl-3d, bdl-5 Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
id		0..1	string	There are no (further) constraints on this element Element id Bundle.entry:procedure.response.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Conditions The cardinality or value of this element may be affected by these constraints: ele-1 Mappings rim: n/a
extension	C	0..*	Extension	There are no (further) constraints on this element Element id Bundle.entry:procedure.response.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Slicing Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! C	0..*	Extension	There are no (further) constraints on this element Element id Bundle.entry:procedure.response.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
status	Σ	1..1	string	There are no (further) constraints on this element Element id Bundle.entry:procedure.response.status Short description Status response code (text optional) Definition The status code returned by processing this entry. The status SHALL start with a 3 digit HTTP code (e.g. 404) and may contain the standard HTTP description associated with the status code. Comments Note that FHIR strings SHALL NOT exceed 1,048,576 (10241024) characters in size Data type* string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
location	Σ	0..1	uri	There are no (further) constraints on this element Element id Bundle.entry:procedure.response.location Short description The location (if the operation returns a location) Definition The location header created by processing this operation, populated if the operation returns a location. Comments see http://en.wikipedia.org/wiki/Uniform_resource_identifier Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
etag	Σ	0..1	string	There are no (further) constraints on this element Element id Bundle.entry:procedure.response.etag Short description The Etag for the resource (if relevant) Definition The Etag for the resource, if the operation for the entry produced a versioned resource (see Resource Metadata and Versioning and Managing Resource Contention). Comments Etags match the Resource.meta.versionId. The ETag has to match the version id in the header if a resource is included. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
lastModified	Σ	0..1	instant	There are no (further) constraints on this element Element id Bundle.entry:procedure.response.lastModified Short description Server's date time modified Definition The date/time that the resource was modified on the server. Comments This has to match the same time in the meta header (meta.lastUpdated) if a resource is included. Data type instant Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
outcome	Σ	0..1	Resource	There are no (further) constraints on this element Element id Bundle.entry:procedure.response.outcome Short description OperationOutcome with hints and warnings (for batch/transaction) Definition An OperationOutcome containing hints and warnings produced as part of processing this entry in a batch or transaction. Comments For a POST/PUT operation, this is the equivalent outcome that would be returned for prefer = operationoutcome - except that the resource is always returned whether or not the outcome is returned. This outcome is not used for error responses in batch/transaction, only for hints and warnings. In a batch operation, the error will be in Bundle.entry.response, and for transaction, there will be a single OperationOutcome instead of a bundle in the case of an error. Data type Resource Mappings rim: n/a rim: Entity. Role, or Act
fileAttachment	Σ C	0..*	BackboneElement	There are no (further) constraints on this element Element id Bundle.entry:fileAttachment Short description Entry in the bundle - will have a resource or information Definition An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only). Data type BackboneElement Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` bdl-8: fullUrl cannot be a version specific reference `fullUrl.exists() implies fullUrl.contains('/_history/').not()` bdl-5: must be a resource unless there's a request or response `resource.exists() or request.exists() or response.exists()` Mappings rim: n/a
id		0..1	string	There are no (further) constraints on this element Element id Bundle.entry:fileAttachment.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Conditions The cardinality or value of this element may be affected by these constraints: ele-1 Mappings rim: n/a
extension	C	0..*	Extension	There are no (further) constraints on this element Element id Bundle.entry:fileAttachment.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Slicing Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! C	0..*	Extension	There are no (further) constraints on this element Element id Bundle.entry:fileAttachment.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
link	Σ	0..*	see (link)	There are no (further) constraints on this element Element id Bundle.entry:fileAttachment.link Short description Links related to this entry Definition A series of links that provide context to this entry.
fullUrl	Σ C	0..1	uri	There are no (further) constraints on this element Element id Bundle.entry:fileAttachment.fullUrl Short description URI for resource (e.g. the absolute URL server address, URI for UUID/OID, etc.) Definition The Absolute URL for the resource. Except for transactions and batches, each entry in a Bundle must have a fullUrl. The fullUrl SHALL NOT disagree with the id in the resource - i.e. if the fullUrl is not a urn:uuid, the URL shall be version-independent URL consistent with the Resource.id. The fullUrl is a version independent reference to the resource. Even when not required, fullUrl MAY be set to a urn:uuid to allow referencing entries in a transaction. The fullUrl can be an arbitrary URI and is not limited to urn:uuid, urn:oid, http, and https. The fullUrl element SHALL have a value except when: invoking a create invoking or responding to an operation where the body is not a single identified resource invoking or returning the results of a search or history operation. Comments fullUrl might not be unique in the context of a resource. Note that since FHIR resources do not need to be served through the FHIR API, the fullURL might be a URN or an absolute URL that does not end with the logical id of the resource (Resource.id). However, but if the fullUrl does look like a RESTful server URL (e.g. meets the regex, then the 'id' portion of the fullUrl SHALL end with the Resource.id. Note that the fullUrl is not the same as the canonical URL - it's an absolute url for an endpoint serving the resource (these will happen to have the same value on the canonical server for the resource with the canonical URL). Data type uri Conditions The cardinality or value of this element may be affected by these constraints: bdl-7, bdl-15, bdl-8 Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
resource	Σ C	0..1	FileAttachment	Element id Bundle.entry:fileAttachment.resource Short description A reference to a document Definition A reference to a document of any kind for any purpose. While the term “document” implies a more narrow focus, for this resource this "document" encompasses any serialized object with a mime-type, it includes formal patient-centric documents (CDA), clinical notes, scanned paper, non-patient specific documents like policy text, as well as a photo, video, or audio recording acquired or used in healthcare. The DocumentReference resource provides metadata about the document so that the document can be discovered and managed. The actual content may be inline base64 encoded data or provided by direct reference. Comments Usually, this is used for documents other than those defined by FHIR. Data type FileAttachment Conditions The cardinality or value of this element may be affected by these constraints: bdl-3a, bdl-3b, bdl-3c, bdl-7, bdl-11, bdl-12, bdl-13, bdl-5 Constraints dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources `contained.contained.empty()` dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated `contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()` dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource `contained.where((('#'+id in (%resource.descendants().reference \| %resource.descendants().ofType(canonical) \| %resource.descendants().ofType(uri) \| %resource.descendants().ofType(url))) or descendants().where(reference = '#').exists() or descendants().where(ofType(canonical) = '#').exists() or descendants().where(ofType(canonical) = '#').exists()).not()).trace('unmatched', id).empty()` dom-6: A resource should have narrative for robust management text.`div`.exists() dom-5: If a resource is contained in another resource, it SHALL NOT have a security label `contained.meta.security.empty()` docRef-1: facilityType SHALL only be present if context is not an encounter `facilityType.empty() or context.where(resolve() is Encounter).empty()` docRef-2: practiceSetting SHALL only be present if context is not present `practiceSetting.empty() or context.where(resolve() is Encounter).empty()` Mappings rim: n/a rim: Entity. Role, or Act rim: Entity, Role, or Act workflow: Event w5: infrastructure.documents fhircomposition: when describing a Composition rim: Document[classCode="DOC" and moodCode="EVN"] xds: DocumentEntry cda: when describing a CDA
search	Σ C	0..1	BackboneElement	There are no (further) constraints on this element Element id Bundle.entry:fileAttachment.search Short description Search related information Definition Information about the search process that lead to the creation of this entry. Data type BackboneElement Conditions The cardinality or value of this element may be affected by these constraints: bdl-2 Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
id		0..1	string	There are no (further) constraints on this element Element id Bundle.entry:fileAttachment.search.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Conditions The cardinality or value of this element may be affected by these constraints: ele-1 Mappings rim: n/a
extension	C	0..*	Extension	There are no (further) constraints on this element Element id Bundle.entry:fileAttachment.search.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Slicing Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! C	0..*	Extension	There are no (further) constraints on this element Element id Bundle.entry:fileAttachment.search.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
mode	Σ	0..1	codeBinding	There are no (further) constraints on this element Element id Bundle.entry:fileAttachment.search.mode Short description match \| include - why this is in the result set Definition Why this entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process. Comments There is only one mode. In some corner cases, a resource may be included because it is both a match and an include. In these circumstances, 'match' takes precedence. Data type code Binding Why an entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process. SearchEntryMode (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
score	Σ	0..1	decimal	There are no (further) constraints on this element Element id Bundle.entry:fileAttachment.search.score Short description Search ranking (between 0 and 1) Definition When searching, the server's search ranking score for the entry. Comments Servers are not required to return a ranking score. 1 is most relevant, and 0 is least relevant. Often, search results are sorted by score, but the client may specify a different sort order. See Patient Match for the EMPI search which relates to this element. Data type decimal Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
request	Σ C	0..1	BackboneElement	There are no (further) constraints on this element Element id Bundle.entry:fileAttachment.request Short description Additional execution information (transaction/batch/history) Definition Additional information about how this entry should be processed as part of a transaction or batch. For history, it shows how the entry was processed to create the version contained in the entry. Data type BackboneElement Conditions The cardinality or value of this element may be affected by these constraints: bdl-3a, bdl-3b, bdl-5 Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
id		0..1	string	There are no (further) constraints on this element Element id Bundle.entry:fileAttachment.request.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Conditions The cardinality or value of this element may be affected by these constraints: ele-1 Mappings rim: n/a
extension	C	0..*	Extension	There are no (further) constraints on this element Element id Bundle.entry:fileAttachment.request.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Slicing Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! C	0..*	Extension	There are no (further) constraints on this element Element id Bundle.entry:fileAttachment.request.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
method	Σ C	1..1	codeBinding	There are no (further) constraints on this element Element id Bundle.entry:fileAttachment.request.method Short description GET \| HEAD \| POST \| PUT \| DELETE \| PATCH Definition In a transaction or batch, this is the HTTP action to be executed for this entry. In a history bundle, this indicates the HTTP action that occurred. Comments Note that FHIR strings SHALL NOT exceed 1,048,576 (10241024) characters in size Data type* code Binding HTTP verbs (in the HTTP command line). See HTTP rfc for details. HTTPVerb (required) Conditions The cardinality or value of this element may be affected by these constraints: bdl-3b, bdl-3c, bdl-14, bdl-15 Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
url	Σ	1..1	uri	There are no (further) constraints on this element Element id Bundle.entry:fileAttachment.request.url Short description URL for HTTP equivalent of this entry Definition The URL for this entry, relative to the root (the address to which the request is posted). Comments E.g. for a Patient Create, the method would be "POST" and the URL would be "Patient". For a Patient Update, the method would be PUT and the URL would be "Patient/[id]". Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
ifNoneMatch	Σ	0..1	string	There are no (further) constraints on this element Element id Bundle.entry:fileAttachment.request.ifNoneMatch Short description For managing cache validation Definition If the ETag values match, return a 304 Not Modified status. See the API documentation for "Conditional Read". Comments Note that FHIR strings SHALL NOT exceed 1,048,576 (10241024) characters in size Data type* string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
ifModifiedSince	Σ	0..1	instant	There are no (further) constraints on this element Element id Bundle.entry:fileAttachment.request.ifModifiedSince Short description For managing cache currency Definition Only perform the operation if the last updated date matches. See the API documentation for "Conditional Read". Comments Note: This is intended for where precisely observed times are required, typically system logs etc., and not human-reported times - for them, see date and dateTime (which can be as precise as instant, but is not required to be) below. UTC offset is always required Data type instant Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
ifMatch	Σ	0..1	string	There are no (further) constraints on this element Element id Bundle.entry:fileAttachment.request.ifMatch Short description For managing update contention Definition Only perform the operation if the Etag value matches. For more information, see the API section "Managing Resource Contention". Comments Note that FHIR strings SHALL NOT exceed 1,048,576 (10241024) characters in size Data type* string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
ifNoneExist	Σ	0..1	string	There are no (further) constraints on this element Element id Bundle.entry:fileAttachment.request.ifNoneExist Short description For conditional creates Definition Instruct the server not to perform the create if a specified resource already exists. For further information, see the API documentation for "Conditional Create". This is just the query portion of the URL - what follows the "?" (not including the "?"). Comments Note that FHIR strings SHALL NOT exceed 1,048,576 (10241024) characters in size Data type* string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
response	Σ C	0..1	BackboneElement	There are no (further) constraints on this element Element id Bundle.entry:fileAttachment.response Short description Results of execution (transaction/batch/history) Definition Indicates the results of processing the corresponding 'request' entry in the batch or transaction being responded to or what the results of an operation where when returning history. Data type BackboneElement Conditions The cardinality or value of this element may be affected by these constraints: bdl-3a, bdl-3b, bdl-3d, bdl-5 Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
id		0..1	string	There are no (further) constraints on this element Element id Bundle.entry:fileAttachment.response.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Conditions The cardinality or value of this element may be affected by these constraints: ele-1 Mappings rim: n/a
extension	C	0..*	Extension	There are no (further) constraints on this element Element id Bundle.entry:fileAttachment.response.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Slicing Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! C	0..*	Extension	There are no (further) constraints on this element Element id Bundle.entry:fileAttachment.response.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
status	Σ	1..1	string	There are no (further) constraints on this element Element id Bundle.entry:fileAttachment.response.status Short description Status response code (text optional) Definition The status code returned by processing this entry. The status SHALL start with a 3 digit HTTP code (e.g. 404) and may contain the standard HTTP description associated with the status code. Comments Note that FHIR strings SHALL NOT exceed 1,048,576 (10241024) characters in size Data type* string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
location	Σ	0..1	uri	There are no (further) constraints on this element Element id Bundle.entry:fileAttachment.response.location Short description The location (if the operation returns a location) Definition The location header created by processing this operation, populated if the operation returns a location. Comments see http://en.wikipedia.org/wiki/Uniform_resource_identifier Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
etag	Σ	0..1	string	There are no (further) constraints on this element Element id Bundle.entry:fileAttachment.response.etag Short description The Etag for the resource (if relevant) Definition The Etag for the resource, if the operation for the entry produced a versioned resource (see Resource Metadata and Versioning and Managing Resource Contention). Comments Etags match the Resource.meta.versionId. The ETag has to match the version id in the header if a resource is included. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
lastModified	Σ	0..1	instant	There are no (further) constraints on this element Element id Bundle.entry:fileAttachment.response.lastModified Short description Server's date time modified Definition The date/time that the resource was modified on the server. Comments This has to match the same time in the meta header (meta.lastUpdated) if a resource is included. Data type instant Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
outcome	Σ	0..1	Resource	There are no (further) constraints on this element Element id Bundle.entry:fileAttachment.response.outcome Short description OperationOutcome with hints and warnings (for batch/transaction) Definition An OperationOutcome containing hints and warnings produced as part of processing this entry in a batch or transaction. Comments For a POST/PUT operation, this is the equivalent outcome that would be returned for prefer = operationoutcome - except that the resource is always returned whether or not the outcome is returned. This outcome is not used for error responses in batch/transaction, only for hints and warnings. In a batch operation, the error will be in Bundle.entry.response, and for transaction, there will be a single OperationOutcome instead of a bundle in the case of an error. Data type Resource Mappings rim: n/a rim: Entity. Role, or Act
signature	Σ	0..1	Signature	There are no (further) constraints on this element Element id Bundle.signature Short description Digital Signature Definition Digital Signature - base64 encoded. XML-DSig or a JWS. Requirements A Signature holds an electronic representation of a signature and its supporting context in a FHIR accessible form. The signature may either be a cryptographic type (XML DigSig or a JWS), which is able to provide non-repudiation proof, or it may be a graphical image that represents a signature or a signature process. This element allows capturing signatures on documents, messages, transactions or even search responses, to support content-authentication, non-repudiation or other business cases. This is primarily relevant where the bundle may travel through multiple hops or via other mechanisms where HTTPS non-repudiation is insufficient. Comments The signature could be created by the "author" of the bundle or by the originating device. Requirements around inclusion of a signature, verification of signatures and treatment of signed/non-signed bundles is implementation-environment specific. Data type Signature Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: N/A
issues	Σ C	0..1	OperationOutcome	There are no (further) constraints on this element Element id Bundle.issues Short description Issues with the Bundle Definition Captures issues and warnings that relate to the construction of the Bundle and the content within it. Comments Usage notes: These issues and warnings must apply to the Bundle as a whole, not to individual entries.Messages relating to the processing of individual entries (e.g. in a batch or transaction) SHALL be reported in the entry.response.outcome for that entry. If there are errors that arise in the creation of the Bundle, then that should be handled by an OperationOutcome being returned instead of the Bundle. Data type OperationOutcome Conditions The cardinality or value of this element may be affected by these constraints: bdl-16, bdl-17 Constraints dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources `contained.contained.empty()` dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated `contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()` dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource `contained.where((('#'+id in (%resource.descendants().reference \| %resource.descendants().ofType(canonical) \| %resource.descendants().ofType(uri) \| %resource.descendants().ofType(url))) or descendants().where(reference = '#').exists() or descendants().where(ofType(canonical) = '#').exists() or descendants().where(ofType(canonical) = '#').exists()).not()).trace('unmatched', id).empty()` dom-6: A resource should have narrative for robust management text.`div`.exists() dom-5: If a resource is contained in another resource, it SHALL NOT have a security label `contained.meta.security.empty()` Mappings rim: n/a rim: Entity. Role, or Act rim: Entity, Role, or Act w5: infrastructure.exchange rim: Grouping is handled through multiple repetitions from whatever context references the outcomes (no specific grouper required)

{

"resourceType": "Bundle",

"type": "transaction",

"entry": [

{

"fullUrl": "urn:uuid:composition-cardiology-001",

"resource": {

"resourceType": "Composition",

"meta": {

"profile": [

"https://fhir.synapxe.sg/StructureDefinition/profile-cardiologyreport"

]

"extension": [

{

"url": "https://fhir.synapxe.sg/StructureDefinition/ext-displayMethod",

"valueCode": "html"

}

"identifier": [

{

"system": "https://fhir.synapxe.sg/NamingSystem/record-id",

"value": "CARDIO-2026-02-06-001"

{

"system": "https://fhir.synapxe.sg/NamingSystem/accession-no",

"value": "ACC-2026-02-06-001"

}

"status": "final",

"type": {

"coding": [

{

"system": "https://fhir.synapxe.sg/CodeSystem/nehr-doc-types",
"code": "CARDIOLOGY",
"display": "Cardiology Report"

}

]

"subject": [

{

"type": "Patient",

"identifier": {

"system": "https://fhir.synapxe.sg/NamingSystem/nric",

"value": "S9876543A"

}

"encounter": {

"type": "Encounter",

"identifier": {

"system": "https://fhir.synapxe.sg/NamingSystem/event-id",

"value": "EVT-2026-02-06-001"

}

"date": "2026-02-06T10:30:00+08:00",

"author": [

{

"type": "Practitioner",

"identifier": {

"system": "https://fhir.synapxe.sg/NamingSystem/mcr",

"value": "M12345"

}

"title": "Cardiology Report",

"note": [

{

"text": "Patient presented with chest pain. Echocardiogram and cardiac catheterization performed. Mild left ventricular hypertrophy noted. Stent placed in LAD."

}

"attester": [

{

"mode": {

"coding": [

{

"system": "http://hl7.org/fhir/CodeSystem/composition-attestation-mode",
"code": "official",
"display": "Official"

}

]

"party": {

"type": "Practitioner",

"identifier": {

"system": "https://fhir.synapxe.sg/NamingSystem/mcr",

"value": "M67890"

}

"custodian": {

"type": "Organization",

"identifier": {

"system": "https://fhir.synapxe.sg/NamingSystem/hci-code",

"value": "HCI-12345"

}

"section": [

{

"code": {

"coding": [

{

"system": "https://fhir.synapxe.sg/CodeSystem/cardiologyreport-section-type",
"code": "procedure",
"display": "Procedure"

}

]

"entry": [

{

"reference": "urn:uuid:procedure-echo-001"

}

]

{

"code": {

"coding": [

{

"system": "https://fhir.synapxe.sg/CodeSystem/cardiologyreport-section-type",
"code": "procedure",
"display": "Procedure"

}

]

"entry": [

{

"reference": "urn:uuid:procedure-cath-001"

}

]

{

"code": {

"coding": [

{

"system": "https://fhir.synapxe.sg/CodeSystem/cardiologyreport-section-type",
"code": "fileAttachment",
"display": "DocumentReference"

}

]

"entry": [

{

"reference": "urn:uuid:fileattachment-001"

}

]

}

]

"request": {

"method": "POST",

"url": "Composition"

}

{

"fullUrl": "urn:uuid:procedure-echo-001",

"resource": {

"resourceType": "Procedure",

"meta": {

"profile": [

"https://fhir.synapxe.sg/StructureDefinition/profile-cr-procedure"

]

"contained": [

{

"resourceType": "ServiceRequest",

"id": "sr-echo-001",

"meta": {

"profile": [

"https://fhir.synapxe.sg/StructureDefinition/profile-cr-servicerequest"

]

"status": "active",

"intent": "order",

"subject": {

"type": "Patient",

"identifier": {

"system": "https://fhir.synapxe.sg/NamingSystem/nric",

"value": "S9876543A"

}

"occurrenceDateTime": "2026-02-06T08:00:00+08:00",

"requester": {

"type": "Practitioner",

"identifier": {

"system": "https://fhir.synapxe.sg/NamingSystem/mcr",

"value": "M12345"

}

"note": [

{

"text": "Echocardiogram ordered for evaluation of chest pain and suspected LVH."

}

]

{

"resourceType": "DiagnosticReport",

"id": "dr-echo-001",

"meta": {

"profile": [

"https://fhir.synapxe.sg/StructureDefinition/profile-cr-diagnosticreport"

]

"contained": [

{

"resourceType": "PractitionerRole",

"id": "pr-echo-001",

"meta": {

"profile": [

"https://fhir.synapxe.sg/StructureDefinition/profile-practitionerrole"

]

"practitioner": {

"type": "Practitioner",

"identifier": {

"system": "https://fhir.synapxe.sg/NamingSystem/mcr",

"value": "M12345"

}

"code": [

{

"coding": [

{

"system": "http://snomed.info/sct",
"code": "17561000",
"display": "Cardiologist"

}

]

}

]

{

"resourceType": "Observation",

"id": "obs-lvef-001",

"meta": {

"profile": [

"https://fhir.synapxe.sg/StructureDefinition/profile-cr-observation"

]

"identifier": [

{

"system": "https://fhir.synapxe.sg/NamingSystem/investigation-id",

"value": "INV-LVEF-2026-001"

{

"system": "https://fhir.synapxe.sg/NamingSystem/sequence-no",

"value": "1"

}

"status": "final",

"code": {

"coding": [

{

"system": "http://loinc.org",
"code": "10230-1",
"display": "Left ventricular Ejection fraction"

}

]

"valueQuantity": {

"value": 57,
"unit": "%",
"system": "http://unitsofmeasure.org",
"code": "%"

"interpretation": [

{

"coding": [

{

"system": "http://terminology.hl7.org/CodeSystem/v3-ObservationInterpretation",
"code": "N",
"display": "Normal"

}

]

}

"note": [

{

"text": "LVEF within normal range. Mild concentric LVH present."

}

]

{

"resourceType": "Observation",

"id": "obs-wall-001",

"meta": {

"profile": [

"https://fhir.synapxe.sg/StructureDefinition/profile-cr-observation"

]

"identifier": [

{

"system": "https://fhir.synapxe.sg/NamingSystem/investigation-id",

"value": "INV-WALL-2026-001"

{

"system": "https://fhir.synapxe.sg/NamingSystem/sequence-no",

"value": "2"

}

"status": "final",

"code": {

"coding": [

{

"system": "http://loinc.org",
"code": "29468-6",
"display": "Interventricular septum Thickness during diastole by US.M-mode"

}

]

"valueQuantity": {

"value": 13,
"unit": "mm",
"system": "http://unitsofmeasure.org",
"code": "mm"

"interpretation": [

{

"coding": [

{

"system": "http://terminology.hl7.org/CodeSystem/v3-ObservationInterpretation",
"code": "H",
"display": "High"

}

]

}

"note": [

{

"text": "Interventricular septum thickness is mildly increased suggesting concentric LVH."

}

]

}

"identifier": [

{

"system": "https://fhir.synapxe.sg/NamingSystem/sequence-no",

"value": "1"

}

"status": "final",

"category": [

{

"coding": [

{

"system": "http://terminology.hl7.org/CodeSystem/v2-0074",
"code": "LAB",
"display": "Laboratory"

}

]

}

"code": {

"coding": [

{

"system": "http://loinc.org",
"code": "34552-0",
"display": "Cardiac 2D echo panel"

}

]

"effectiveDateTime": "2026-02-06T09:30:00+08:00",

"performer": [

{

"reference": "#pr-echo-001"

}

"result": [

{

"reference": "#obs-lvef-001"

{

"reference": "#obs-wall-001"

}

"conclusion": "Echocardiogram shows mild concentric left ventricular hypertrophy. LVEF 57%. No significant valvular abnormalities. No pericardial effusion."

}

"identifier": [

{

"system": "https://fhir.synapxe.sg/NamingSystem/sequence-no",

"value": "1"

}

"basedOn": [

{

"reference": "#sr-echo-001"

}

"status": "completed",

"code": {

"coding": [

{

"system": "http://snomed.info/sct",
"code": "40701008",
"display": "Echocardiography"

}

"text": "Transthoracic Echocardiogram (TTE)"

"subject": {

"type": "Patient",

"identifier": {

"system": "https://fhir.synapxe.sg/NamingSystem/nric",

"value": "S9876543A"

}

"occurrencePeriod": {

"start": "2026-02-06T09:00:00+08:00",

"end": "2026-02-06T09:30:00+08:00"

"performer": [

{

"function": {

"coding": [

{

"system": "http://snomed.info/sct",
"code": "17561000",
"display": "Cardiologist"

}

]

"actor": {

"type": "Practitioner",

"identifier": {

"system": "https://fhir.synapxe.sg/NamingSystem/mcr",

"value": "M12345"

}

"location": {

"display": "Cardiac Investigation Unit, Level 3"

"reason": [

{

"concept": {

"coding": [

{

"system": "http://snomed.info/sct",
"code": "29857009",
"display": "Chest pain"

}

]

}

"bodySite": [

{

"coding": [

{

"system": "http://snomed.info/sct",
"code": "80891009",
"display": "Heart structure"

}

]

}

"outcome": {

"coding": [

{

"system": "http://snomed.info/sct",
"code": "385669000",
"display": "Successful"

}

]

"report": [

{

"reference": "#dr-echo-001"

}

"note": [

{

"text": "Echocardiogram completed. Mild concentric LVH noted. LVEF 57%. No significant valvular disease. Recommend cardiac catheterization for further evaluation."

}

]

"request": {

"method": "POST",

"url": "Procedure"

}

{

"fullUrl": "urn:uuid:procedure-cath-001",

"resource": {

"resourceType": "Procedure",

"meta": {

"profile": [

"https://fhir.synapxe.sg/StructureDefinition/profile-cr-procedure"

]

"contained": [

{

"resourceType": "ServiceRequest",

"id": "sr-cath-001",

"meta": {

"profile": [

"https://fhir.synapxe.sg/StructureDefinition/profile-cr-servicerequest"

]

"status": "active",

"intent": "order",

"subject": {

"type": "Patient",

"identifier": {

"system": "https://fhir.synapxe.sg/NamingSystem/nric",

"value": "S9876543A"

}

"occurrenceDateTime": "2026-02-06T09:30:00+08:00",

"requester": {

"type": "Practitioner",

"identifier": {

"system": "https://fhir.synapxe.sg/NamingSystem/mcr",

"value": "M12345"

}

"note": [

{

"text": "Cardiac catheterization with coronary angiography ordered for further evaluation of chest pain and LVH."

}

]

{

"resourceType": "DiagnosticReport",

"id": "dr-cath-001",

"meta": {

"profile": [

"https://fhir.synapxe.sg/StructureDefinition/profile-cr-diagnosticreport"

]

"contained": [

{

"resourceType": "PractitionerRole",

"id": "pr-cath-001",

"meta": {

"profile": [

"https://fhir.synapxe.sg/StructureDefinition/profile-practitionerrole"

]

"practitioner": {

"type": "Practitioner",

"identifier": {

"system": "https://fhir.synapxe.sg/NamingSystem/mcr",

"value": "M12345"

}

"code": [

{

"coding": [

{

"system": "http://snomed.info/sct",
"code": "17561000",
"display": "Cardiologist"

}

]

}

]

{

"resourceType": "Observation",

"id": "obs-stenosis-001",

"meta": {

"profile": [

"https://fhir.synapxe.sg/StructureDefinition/profile-cr-observation"

]

"identifier": [

{

"system": "https://fhir.synapxe.sg/NamingSystem/investigation-id",

"value": "INV-STEN-2026-001"

{

"system": "https://fhir.synapxe.sg/NamingSystem/sequence-no",

"value": "1"

}

"status": "final",

"code": {

"coding": [

{

"system": "http://loinc.org",
"code": "LP94892-4",
"display": "Coronary artery stenosis"

}

]

"valueString": "70% stenosis in proximal LAD",

"interpretation": [

{

"coding": [

{

"system": "http://terminology.hl7.org/CodeSystem/v3-ObservationInterpretation",
"code": "A",
"display": "Abnormal"

}

]

}

"note": [

{

"text": "Significant stenosis identified in proximal LAD. Stenting performed."

}

]

}

"identifier": [

{

"system": "https://fhir.synapxe.sg/NamingSystem/sequence-no",

"value": "2"

}

"status": "final",

"category": [

{

"coding": [

{

"system": "http://terminology.hl7.org/CodeSystem/v2-0074",
"code": "LAB",
"display": "Laboratory"

}

]

}

"code": {

"coding": [

{

"system": "http://loinc.org",
"code": "18745-0",
"display": "Cardiac catheterization study"

}

]

"effectiveDateTime": "2026-02-06T11:30:00+08:00",

"performer": [

{

"reference": "#pr-cath-001"

}

"result": [

{

"reference": "#obs-stenosis-001"

}

"conclusion": "Coronary angiography reveals 70% stenosis in proximal LAD. PCI with DES performed successfully. TIMI 3 flow post-intervention. RCA and LCx are normal."

{

"resourceType": "Device",

"id": "dev-stent-001",

"meta": {

"profile": [

"https://fhir.synapxe.sg/StructureDefinition/profile-device"

]

"identifier": [

{

"system": "https://fhir.synapxe.sg/NamingSystem/device-serial",

"value": "DES-2026-LAD-001"

}

"displayName": "Drug-Eluting Coronary Stent 3.0mm x 18mm",

"manufacturer": "Medtronic Cardiovascular",

"expirationDate": "2028-06-30",

"lotNumber": "LOT-DES-2026-078",

"type": [

{

"coding": [

{

"system": "http://snomed.info/sct",
"code": "360046005",
"display": "Coronary artery stent"

}

]

}

]

{

"resourceType": "MedicationAdministration",

"id": "medadmin-heparin-001",

"meta": {

"profile": [

"https://fhir.synapxe.sg/StructureDefinition/profile-medicationadministration"

]

"status": "completed",

"medication": {

"concept": {

"coding": [

{

"system": "http://snomed.info/sct",
"code": "372877000",
"display": "Heparin"

}

"text": "Unfractionated Heparin 5000 IU IV bolus"

}

"subject": {

"type": "Patient",

"identifier": {

"system": "https://fhir.synapxe.sg/NamingSystem/nric",

"value": "S9876543A"

}

"dosage": {

"text": "5000 IU IV bolus prior to catheterization",

"route": {

"coding": [

{

"system": "http://snomed.info/sct",
"code": "47625008",
"display": "Intravenous route"

}

]

"dose": {

"value": 5000,
"unit": "IU",
"system": "http://unitsofmeasure.org",
"code": "[iU]"

}

"identifier": [

{

"system": "https://fhir.synapxe.sg/NamingSystem/sequence-no",

"value": "2"

}

"basedOn": [

{

"reference": "#sr-cath-001"

}

"status": "completed",

"category": [

{

"coding": [

{

"system": "http://snomed.info/sct",
"code": "103693007",
"display": "Diagnostic procedure"

}

]

}

"code": {

"coding": [

{

"system": "http://snomed.info/sct",
"code": "41976001",
"display": "Cardiac catheterization"

}

"text": "Percutaneous Coronary Intervention with Drug-Eluting Stent"

"subject": {

"type": "Patient",

"identifier": {

"system": "https://fhir.synapxe.sg/NamingSystem/nric",

"value": "S9876543A"

}

"occurrencePeriod": {

"start": "2026-02-06T10:00:00+08:00",

"end": "2026-02-06T11:30:00+08:00"

"performer": [

{

"function": {

"coding": [

{

"system": "http://snomed.info/sct",
"code": "17561000",
"display": "Cardiologist"

}

]

"actor": {

"type": "Practitioner",

"identifier": {

"system": "https://fhir.synapxe.sg/NamingSystem/mcr",

"value": "M12345"

}

"location": {

"display": "Cardiac Catheterization Laboratory 1, Level 5"

"reason": [

{

"concept": {

"coding": [

{

"system": "http://snomed.info/sct",
"code": "194828000",
"display": "Angina pectoris"

}

]

}

"bodySite": [

{

"coding": [

{

"system": "http://snomed.info/sct",
"code": "68787003",
"display": "Structure of left anterior descending branch of left coronary artery"

}

]

}

"outcome": {

"coding": [

{

"system": "http://snomed.info/sct",
"code": "385669000",
"display": "Successful"

}

]

"report": [

{

"reference": "#dr-cath-001"

}

"complication": [

{

"concept": {

"coding": [

{

"system": "https://fhir.synapxe.sg/CodeSystem/complication-types",
"code": "none",
"display": "No Complications"

}

]

}

"followUp": [

{

"coding": [

{

"system": "https://fhir.synapxe.sg/CodeSystem/followup-types",
"code": "outpatient",
"display": "Outpatient Follow-up"

}

]

}

"note": [

{

"text": "PCI with DES to proximal LAD performed successfully. 70% stenosis reduced to 0% residual. TIMI 3 flow achieved. Patient tolerated procedure well. Heparin administered during procedure. No complications. Dual antiplatelet therapy prescribed post-procedure."

}

"focalDevice": [

{

"action": {

"coding": [

{

"system": "http://snomed.info/sct",
"code": "129284003",
"display": "Surgical action - implantation"

}

]

"manipulated": {

"reference": "#dev-stent-001"

}

"used": [

{

"reference": {

"reference": "#medadmin-heparin-001"

}

]

"request": {

"method": "POST",

"url": "Procedure"

}

{

"fullUrl": "urn:uuid:fileattachment-001",

"resource": {

"resourceType": "DocumentReference",

"meta": {

"profile": [

"https://fhir.synapxe.sg/StructureDefinition/profile-fileattachment"

]

"identifier": [

{

"system": "https://fhir.synapxe.sg/NamingSystem/sequence-no",

"value": "SEQ-001"

}

"status": "current",

"category": [

{

"coding": [

{

"system": "https://fhir.synapxe.sg/CodeSystem/attachment-category",
"code": "DICOM",
"display": "DICOM Image"

}

]

}

"subject": {

"type": "Patient",

"identifier": {

"system": "https://fhir.synapxe.sg/NamingSystem/nric",

"value": "S9876543A"

}

"content": [

{

"attachment": {

"contentType": "application/dicom",
"data": "VGhpcyBpcyBhIGJhc2U2NCBlbmNvZGVkIHBsYWNlaG9sZGVyIGZvciBESUNPTSBpbWFnZSBkYXRh",
"title": "Echocardiogram Images and Coronary Angiography",
"creation": "2026-02-06T09:30:00+08:00"

}

]

"request": {

"method": "POST",

"url": "DocumentReference"

}

]

}

Successful Response

Structure
JSON

BundleCardiologyReport (Bundle)	C		Bundle	There are no (further) constraints on this element Element id Bundle Short description Contains a collection of resources Definition A container for a collection of resources. Data type Bundle Constraints bdl-7: FullUrl must be unique in a bundle, or else entries with the same fullUrl must have different meta.versionId (except in history bundles) `(type = 'history') or entry.where(fullUrl.exists()).select(fullUrl&iif(resource.meta.versionId.exists(), resource.meta.versionId, '')).isDistinct()` bdl-9: A document must have an identifier with a system and a value `type = 'document' implies (identifier.system.exists() and identifier.value.exists())` bdl-17: Use and meaning of issues for documents has not been validated because the content will not be rendered in the document. `type = 'document' implies issues.empty()` bdl-16: Issue.severity for all issues within the OperationOutcome must be either 'information' or 'warning'. `issues.exists() implies (issues.issue.severity = 'information' or issues.issue.severity = 'warning')` bdl-18: Self link is required for searchsets. `type = 'searchset' implies link.where(relation = 'self' and url.exists()).exists()` bdl-13: A subscription-notification must have a SubscriptionStatus as the first resource `type = 'subscription-notification' implies entry.first().resource.is(SubscriptionStatus)` bdl-12: A message must have a MessageHeader as the first resource `type = 'message' implies entry.first().resource.is(MessageHeader)` bdl-15: Bundle resources where type is not transaction, transaction-response, batch, or batch-response or when the request is a POST SHALL have Bundle.entry.fullUrl populated `type='transaction' or type='transaction-response' or type='batch' or type='batch-response' or entry.all(fullUrl.exists() or request.method='POST')` bdl-14: entry.request.method PATCH not allowed for history `type = 'history' implies entry.request.method != 'PATCH'` bdl-11: A document must have a Composition as the first resource `type = 'document' implies entry.first().resource.is(Composition)` bdl-10: A document must have a date `type = 'document' implies (timestamp.hasValue())` bdl-3d: For collections of type transaction-response or batch-response, all entries must contain response elements `type in ('transaction-response' \| 'batch-response') implies entry.all(response.exists())` bdl-1: total only when a search or history `total.empty() or (type = 'searchset') or (type = 'history')` bdl-2: entry.search only when a search `(type = 'searchset') or entry.search.empty()` bdl-3a: For collections of type document, message, searchset or collection, all entries must contain resources, and not have request or response elements `type in ('document' \| 'message' \| 'searchset' \| 'collection') implies entry.all(resource.exists() and request.empty() and response.empty())` bdl-3c: For collections of type transaction or batch, all entries must contain request elements, and resources if the method is POST, PUT or PATCH `type in ('transaction' \| 'batch') implies entry.all(request.method.exists() and ((request.method in ('POST' \| 'PATCH' \| 'PUT')) = resource.exists()))` bdl-3b: For collections of type history, all entries must contain request or response elements, and resources if the method is POST, PUT or PATCH `type = 'history' implies entry.all(request.exists() and response.exists() and ((request.method in ('POST' \| 'PATCH' \| 'PUT')) = resource.exists()))` Mappings rim: n/a rim: Entity. Role, or Act w5: infrastructure.structure v2: N/A rim: N/A cda: ClinicalDocument, if bundle.type = document
id	Σ	0..1	id	There are no (further) constraints on this element Element id Bundle.id Short description Logical id of this artifact Definition The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes. Comments Within the context of the FHIR RESTful interactions, the resource has an id except for cases like the create and conditional update. Otherwise, the use of the resouce id depends on the given use case. Data type id
meta	Σ	0..1	Meta	There are no (further) constraints on this element Element id Bundle.meta Short description Metadata about the resource Definition The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource. Data type Meta Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: N/A
implicitRules	Σ ?!	0..1	uri	There are no (further) constraints on this element Element id Bundle.implicitRules Short description A set of rules under which this content was created Definition A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc. Comments Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of its narrative along with other profiles, value sets, etc. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
language		0..1	codeBinding	There are no (further) constraints on this element Element id Bundle.language Short description Language of the resource content Definition The base language in which the resource is written. Comments Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute). Data type code Binding IETF language tag for a human language AllLanguages (required) Additional bindings CommonLanguages (starter) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
identifier	Σ C	0..1	Identifier	There are no (further) constraints on this element Element id Bundle.identifier Short description Persistent identifier for the bundle Definition A persistent identifier for the bundle that won't change as a bundle is copied from server to server. Comments Persistent identity generally only matters for batches of type Document, Message, and Collection. It would not normally be populated for search and history results and servers ignore Bundle.identifier when processing batches and transactions. For Documents the .identifier SHALL be populated such that the .identifier is globally unique. Data type Identifier Conditions The cardinality or value of this element may be affected by these constraints: bdl-9 Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ident-1: Identifier with no value has limited utility. If communicating that an identifier value has been suppressed or missing, the value element SHOULD be present with an extension indicating the missing semantic - e.g. data-absent-reason `value.exists()` Mappings rim: n/a v2: CX / EI (occasionally, more often EI maps to a resource id or a URL) rim: II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd: Identifier w5: FiveWs.identifier cda: ClinicalDocument.id
type	Σ C	1..1	codeBindingFixed Value	Element id Bundle.type Short description document \| message \| transaction \| transaction-response \| batch \| batch-response \| history \| searchset \| collection \| subscription-notification Definition Indicates the purpose of this bundle - how it is intended to be used. Comments It's possible to use a bundle for other purposes (e.g. a document can be accepted as a transaction). This is primarily defined so that there can be specific rules for some of the bundle types. Data type code Binding Indicates the purpose of a bundle - how it is intended to be used. BundleType (required) Conditions The cardinality or value of this element may be affected by these constraints: bdl-1, bdl-2, bdl-3a, bdl-3b, bdl-3c, bdl-3d, bdl-7, bdl-9, bdl-10, bdl-11, bdl-12, bdl-13, bdl-14, bdl-15, bdl-17, bdl-18 Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Fixed value transaction Mappings rim: n/a w5: FiveWs.class
timestamp	Σ C	0..1	instant	There are no (further) constraints on this element Element id Bundle.timestamp Short description When the bundle was assembled Definition The date/time that the bundle was assembled - i.e. when the resources were placed in the bundle. Comments For many bundles, the timestamp is equal to .meta.lastUpdated, because they are not stored (e.g. search results). When a bundle is placed in a persistent store, .meta.lastUpdated will be usually be changed by the server. When the bundle is a message, a middleware agent altering the message (even if not stored) SHOULD update .meta.lastUpdated. .timestamp is used to track the original time of the Bundle, and SHOULD be populated. Usage: document : the date the document was created. Note: the composition may predate the document, or be associated with multiple documents. The date of the composition - the authoring time - may be earlier than the document assembly time message : the date that the content of the message was assembled. This date is not changed by middleware engines unless they add additional data that changes the meaning of the time of the message history : the date that the history was assembled. This time would be used as the _since time to ask for subsequent updates searchset : the time that the search set was assembled. Note that different pages MAY have different timestamps but need not. Having different timestamps does not imply that subsequent pages will represent or include changes made since the initial query transaction \| transaction-response \| batch \| batch-response \| collection : no particular assigned meaning The timestamp value should be greater than the lastUpdated and other timestamps in the resources in the bundle, and it should be equal or earlier than the .meta.lastUpdated on the Bundle itself. Data type instant Conditions The cardinality or value of this element may be affected by these constraints: bdl-10 Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a w5: FiveWs.init cda: ClinicalDocument.effectiveTime
total	Σ C	0..1	unsignedInt	There are no (further) constraints on this element Element id Bundle.total Short description If search, the total number of matches Definition If a set of search matches, this is the (potentially estimated) total number of entries of type 'match' across all pages in the search. It does not include search.mode = 'include' or 'outcome' entries and it does not provide a count of the number of entries in the Bundle. Comments Only used if the bundle is a search result set. The total does not include resources such as OperationOutcome and included resources, only the total number of matching resources. Data type unsignedInt Conditions The cardinality or value of this element may be affected by these constraints: bdl-1 Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
link	Σ C	0..*	BackboneElement	There are no (further) constraints on this element Element id Bundle.link Short description Links related to this Bundle Definition A series of links that provide context to this bundle. Comments Both Bundle.link and Bundle.entry.link are defined to support providing additional context when Bundles are used (e.g. HATEOAS). Bundle.entry.link corresponds to links found in the HTTP header if the resource in the entry was read directly. This specification defines some specific uses of Bundle.link for searching and paging, but no specific uses for Bundle.entry.link, and no defined function in a transaction - the meaning is implementation specific. The behavior of navigation link types (next/prev/first/last) are well defined for searchset and history Bundles but are not currently defined for other types. Implementers who choose to use such link relationships for other bundle types will need to negotiate behavior with their interoperability partners. Data type BackboneElement Conditions The cardinality or value of this element may be affected by these constraints: bdl-18 Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
id		0..1	string	There are no (further) constraints on this element Element id Bundle.link.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Conditions The cardinality or value of this element may be affected by these constraints: ele-1 Mappings rim: n/a
extension	C	0..*	Extension	There are no (further) constraints on this element Element id Bundle.link.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Slicing Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! C	0..*	Extension	There are no (further) constraints on this element Element id Bundle.link.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
relation	Σ C	1..1	codeBinding	There are no (further) constraints on this element Element id Bundle.link.relation Short description See http://www.iana.org/assignments/link-relations/link-relations.xhtml#link-relations-1 Definition A name which details the functional use for this link - see http://www.iana.org/assignments/link-relations/link-relations.xhtml#link-relations-1. Comments Note that FHIR strings SHALL NOT exceed 1,048,576 (10241024) characters in size Data type* code Binding LinkRelationTypes (required) Conditions The cardinality or value of this element may be affected by these constraints: bdl-18 Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
url	Σ C	1..1	uri	There are no (further) constraints on this element Element id Bundle.link.url Short description Reference details for the link Definition The reference details for the link. Comments see http://en.wikipedia.org/wiki/Uniform_resource_identifier Data type uri Conditions The cardinality or value of this element may be affected by these constraints: bdl-18 Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
entry	Σ C	1..*	BackboneElement	Element id Bundle.entry Short description Entry in the bundle - will have a resource or information Definition An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only). Data type BackboneElement Slicing Unordered, Open, by fullUrl(Value) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` bdl-8: fullUrl cannot be a version specific reference `fullUrl.exists() implies fullUrl.contains('/_history/').not()` bdl-5: must be a resource unless there's a request or response `resource.exists() or request.exists() or response.exists()` Mappings rim: n/a
(All Slices)				The requirements in this element apply to all slices
id		0..1	string	There are no (further) constraints on this element Element id Bundle.entry.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Conditions The cardinality or value of this element may be affected by these constraints: ele-1 Mappings rim: n/a
extension	C	0..*	Extension	There are no (further) constraints on this element Element id Bundle.entry.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Slicing Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! C	0..*	Extension	There are no (further) constraints on this element Element id Bundle.entry.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
link	Σ	0..*	see (link)	There are no (further) constraints on this element Element id Bundle.entry.link Short description Links related to this entry Definition A series of links that provide context to this entry.
fullUrl	Σ C	0..1	uri	There are no (further) constraints on this element Element id Bundle.entry.fullUrl Short description URI for resource (e.g. the absolute URL server address, URI for UUID/OID, etc.) Definition The Absolute URL for the resource. Except for transactions and batches, each entry in a Bundle must have a fullUrl. The fullUrl SHALL NOT disagree with the id in the resource - i.e. if the fullUrl is not a urn:uuid, the URL shall be version-independent URL consistent with the Resource.id. The fullUrl is a version independent reference to the resource. Even when not required, fullUrl MAY be set to a urn:uuid to allow referencing entries in a transaction. The fullUrl can be an arbitrary URI and is not limited to urn:uuid, urn:oid, http, and https. The fullUrl element SHALL have a value except when: invoking a create invoking or responding to an operation where the body is not a single identified resource invoking or returning the results of a search or history operation. Comments fullUrl might not be unique in the context of a resource. Note that since FHIR resources do not need to be served through the FHIR API, the fullURL might be a URN or an absolute URL that does not end with the logical id of the resource (Resource.id). However, but if the fullUrl does look like a RESTful server URL (e.g. meets the regex, then the 'id' portion of the fullUrl SHALL end with the Resource.id. Note that the fullUrl is not the same as the canonical URL - it's an absolute url for an endpoint serving the resource (these will happen to have the same value on the canonical server for the resource with the canonical URL). Data type uri Conditions The cardinality or value of this element may be affected by these constraints: bdl-7, bdl-15, bdl-8 Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
resource	Σ C	0..1	Resource	There are no (further) constraints on this element Element id Bundle.entry.resource Short description A resource in the bundle Definition The Resource for the entry. The purpose/meaning of the resource is determined by the Bundle.type. This is allowed to be a Parameters resource if and only if it is referenced by something else within the Bundle that provides context/meaning. Data type Resource Conditions The cardinality or value of this element may be affected by these constraints: bdl-3a, bdl-3b, bdl-3c, bdl-7, bdl-11, bdl-12, bdl-13, bdl-5 Mappings rim: n/a rim: Entity. Role, or Act
search	Σ C	0..1	BackboneElement	There are no (further) constraints on this element Element id Bundle.entry.search Short description Search related information Definition Information about the search process that lead to the creation of this entry. Data type BackboneElement Conditions The cardinality or value of this element may be affected by these constraints: bdl-2 Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
id		0..1	string	There are no (further) constraints on this element Element id Bundle.entry.search.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Conditions The cardinality or value of this element may be affected by these constraints: ele-1 Mappings rim: n/a
extension	C	0..*	Extension	There are no (further) constraints on this element Element id Bundle.entry.search.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Slicing Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! C	0..*	Extension	There are no (further) constraints on this element Element id Bundle.entry.search.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
mode	Σ	0..1	codeBinding	There are no (further) constraints on this element Element id Bundle.entry.search.mode Short description match \| include - why this is in the result set Definition Why this entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process. Comments There is only one mode. In some corner cases, a resource may be included because it is both a match and an include. In these circumstances, 'match' takes precedence. Data type code Binding Why an entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process. SearchEntryMode (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
score	Σ	0..1	decimal	There are no (further) constraints on this element Element id Bundle.entry.search.score Short description Search ranking (between 0 and 1) Definition When searching, the server's search ranking score for the entry. Comments Servers are not required to return a ranking score. 1 is most relevant, and 0 is least relevant. Often, search results are sorted by score, but the client may specify a different sort order. See Patient Match for the EMPI search which relates to this element. Data type decimal Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
request	Σ C	0..1	BackboneElement	There are no (further) constraints on this element Element id Bundle.entry.request Short description Additional execution information (transaction/batch/history) Definition Additional information about how this entry should be processed as part of a transaction or batch. For history, it shows how the entry was processed to create the version contained in the entry. Data type BackboneElement Conditions The cardinality or value of this element may be affected by these constraints: bdl-3a, bdl-3b, bdl-5 Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
id		0..1	string	There are no (further) constraints on this element Element id Bundle.entry.request.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Conditions The cardinality or value of this element may be affected by these constraints: ele-1 Mappings rim: n/a
extension	C	0..*	Extension	There are no (further) constraints on this element Element id Bundle.entry.request.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Slicing Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! C	0..*	Extension	There are no (further) constraints on this element Element id Bundle.entry.request.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
method	Σ C	1..1	codeBinding	There are no (further) constraints on this element Element id Bundle.entry.request.method Short description GET \| HEAD \| POST \| PUT \| DELETE \| PATCH Definition In a transaction or batch, this is the HTTP action to be executed for this entry. In a history bundle, this indicates the HTTP action that occurred. Comments Note that FHIR strings SHALL NOT exceed 1,048,576 (10241024) characters in size Data type* code Binding HTTP verbs (in the HTTP command line). See HTTP rfc for details. HTTPVerb (required) Conditions The cardinality or value of this element may be affected by these constraints: bdl-3b, bdl-3c, bdl-14, bdl-15 Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
url	Σ	1..1	uri	There are no (further) constraints on this element Element id Bundle.entry.request.url Short description URL for HTTP equivalent of this entry Definition The URL for this entry, relative to the root (the address to which the request is posted). Comments E.g. for a Patient Create, the method would be "POST" and the URL would be "Patient". For a Patient Update, the method would be PUT and the URL would be "Patient/[id]". Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
ifNoneMatch	Σ	0..1	string	There are no (further) constraints on this element Element id Bundle.entry.request.ifNoneMatch Short description For managing cache validation Definition If the ETag values match, return a 304 Not Modified status. See the API documentation for "Conditional Read". Comments Note that FHIR strings SHALL NOT exceed 1,048,576 (10241024) characters in size Data type* string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
ifModifiedSince	Σ	0..1	instant	There are no (further) constraints on this element Element id Bundle.entry.request.ifModifiedSince Short description For managing cache currency Definition Only perform the operation if the last updated date matches. See the API documentation for "Conditional Read". Comments Note: This is intended for where precisely observed times are required, typically system logs etc., and not human-reported times - for them, see date and dateTime (which can be as precise as instant, but is not required to be) below. UTC offset is always required Data type instant Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
ifMatch	Σ	0..1	string	There are no (further) constraints on this element Element id Bundle.entry.request.ifMatch Short description For managing update contention Definition Only perform the operation if the Etag value matches. For more information, see the API section "Managing Resource Contention". Comments Note that FHIR strings SHALL NOT exceed 1,048,576 (10241024) characters in size Data type* string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
ifNoneExist	Σ	0..1	string	There are no (further) constraints on this element Element id Bundle.entry.request.ifNoneExist Short description For conditional creates Definition Instruct the server not to perform the create if a specified resource already exists. For further information, see the API documentation for "Conditional Create". This is just the query portion of the URL - what follows the "?" (not including the "?"). Comments Note that FHIR strings SHALL NOT exceed 1,048,576 (10241024) characters in size Data type* string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
response	Σ C	0..1	BackboneElement	There are no (further) constraints on this element Element id Bundle.entry.response Short description Results of execution (transaction/batch/history) Definition Indicates the results of processing the corresponding 'request' entry in the batch or transaction being responded to or what the results of an operation where when returning history. Data type BackboneElement Conditions The cardinality or value of this element may be affected by these constraints: bdl-3a, bdl-3b, bdl-3d, bdl-5 Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
id		0..1	string	There are no (further) constraints on this element Element id Bundle.entry.response.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Conditions The cardinality or value of this element may be affected by these constraints: ele-1 Mappings rim: n/a
extension	C	0..*	Extension	There are no (further) constraints on this element Element id Bundle.entry.response.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Slicing Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! C	0..*	Extension	There are no (further) constraints on this element Element id Bundle.entry.response.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
status	Σ	1..1	string	There are no (further) constraints on this element Element id Bundle.entry.response.status Short description Status response code (text optional) Definition The status code returned by processing this entry. The status SHALL start with a 3 digit HTTP code (e.g. 404) and may contain the standard HTTP description associated with the status code. Comments Note that FHIR strings SHALL NOT exceed 1,048,576 (10241024) characters in size Data type* string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
location	Σ	0..1	uri	There are no (further) constraints on this element Element id Bundle.entry.response.location Short description The location (if the operation returns a location) Definition The location header created by processing this operation, populated if the operation returns a location. Comments see http://en.wikipedia.org/wiki/Uniform_resource_identifier Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
etag	Σ	0..1	string	There are no (further) constraints on this element Element id Bundle.entry.response.etag Short description The Etag for the resource (if relevant) Definition The Etag for the resource, if the operation for the entry produced a versioned resource (see Resource Metadata and Versioning and Managing Resource Contention). Comments Etags match the Resource.meta.versionId. The ETag has to match the version id in the header if a resource is included. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
lastModified	Σ	0..1	instant	There are no (further) constraints on this element Element id Bundle.entry.response.lastModified Short description Server's date time modified Definition The date/time that the resource was modified on the server. Comments This has to match the same time in the meta header (meta.lastUpdated) if a resource is included. Data type instant Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
outcome	Σ	0..1	Resource	There are no (further) constraints on this element Element id Bundle.entry.response.outcome Short description OperationOutcome with hints and warnings (for batch/transaction) Definition An OperationOutcome containing hints and warnings produced as part of processing this entry in a batch or transaction. Comments For a POST/PUT operation, this is the equivalent outcome that would be returned for prefer = operationoutcome - except that the resource is always returned whether or not the outcome is returned. This outcome is not used for error responses in batch/transaction, only for hints and warnings. In a batch operation, the error will be in Bundle.entry.response, and for transaction, there will be a single OperationOutcome instead of a bundle in the case of an error. Data type Resource Mappings rim: n/a rim: Entity. Role, or Act
cardiologyreport	Σ C	1..1	BackboneElement	There are no (further) constraints on this element Element id Bundle.entry:cardiologyreport Short description Entry in the bundle - will have a resource or information Definition An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only). Data type BackboneElement Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` bdl-8: fullUrl cannot be a version specific reference `fullUrl.exists() implies fullUrl.contains('/_history/').not()` bdl-5: must be a resource unless there's a request or response `resource.exists() or request.exists() or response.exists()` Mappings rim: n/a
id		0..1	string	There are no (further) constraints on this element Element id Bundle.entry:cardiologyreport.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Conditions The cardinality or value of this element may be affected by these constraints: ele-1 Mappings rim: n/a
extension	C	0..*	Extension	There are no (further) constraints on this element Element id Bundle.entry:cardiologyreport.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Slicing Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! C	0..*	Extension	There are no (further) constraints on this element Element id Bundle.entry:cardiologyreport.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
link	Σ	0..*	see (link)	There are no (further) constraints on this element Element id Bundle.entry:cardiologyreport.link Short description Links related to this entry Definition A series of links that provide context to this entry.
fullUrl	Σ C	0..1	uri	There are no (further) constraints on this element Element id Bundle.entry:cardiologyreport.fullUrl Short description URI for resource (e.g. the absolute URL server address, URI for UUID/OID, etc.) Definition The Absolute URL for the resource. Except for transactions and batches, each entry in a Bundle must have a fullUrl. The fullUrl SHALL NOT disagree with the id in the resource - i.e. if the fullUrl is not a urn:uuid, the URL shall be version-independent URL consistent with the Resource.id. The fullUrl is a version independent reference to the resource. Even when not required, fullUrl MAY be set to a urn:uuid to allow referencing entries in a transaction. The fullUrl can be an arbitrary URI and is not limited to urn:uuid, urn:oid, http, and https. The fullUrl element SHALL have a value except when: invoking a create invoking or responding to an operation where the body is not a single identified resource invoking or returning the results of a search or history operation. Comments fullUrl might not be unique in the context of a resource. Note that since FHIR resources do not need to be served through the FHIR API, the fullURL might be a URN or an absolute URL that does not end with the logical id of the resource (Resource.id). However, but if the fullUrl does look like a RESTful server URL (e.g. meets the regex, then the 'id' portion of the fullUrl SHALL end with the Resource.id. Note that the fullUrl is not the same as the canonical URL - it's an absolute url for an endpoint serving the resource (these will happen to have the same value on the canonical server for the resource with the canonical URL). Data type uri Conditions The cardinality or value of this element may be affected by these constraints: bdl-7, bdl-15, bdl-8 Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
resource	Σ C	0..1	CardiologyReport	Element id Bundle.entry:cardiologyreport.resource Short description A set of resources composed into a single coherent clinical statement with clinical attestation Definition A set of healthcare-related information that is assembled together into a single logical package that provides a single coherent statement of meaning, establishes its own context and that has clinical attestation with regard to who is making the statement. A Composition defines the structure and narrative content necessary for a document. However, a Composition alone does not constitute a document. Rather, the Composition must be the first entry in a Bundle where Bundle.type=document, and any other resources referenced from Composition must be included as subsequent entries in the Bundle (for example Patient, Practitioner, Encounter, etc.). Comments While the focus of this specification is on patient-specific clinical statements, this resource can also apply to other healthcare-related statements such as study protocol designs, healthcare invoices and other activities that are not necessarily patient-specific or clinical. Data type CardiologyReport Conditions The cardinality or value of this element may be affected by these constraints: bdl-3a, bdl-3b, bdl-3c, bdl-7, bdl-11, bdl-12, bdl-13, bdl-5 Constraints dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources `contained.contained.empty()` dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated `contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()` dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource `contained.where((('#'+id in (%resource.descendants().reference \| %resource.descendants().ofType(canonical) \| %resource.descendants().ofType(uri) \| %resource.descendants().ofType(url))) or descendants().where(reference = '#').exists() or descendants().where(ofType(canonical) = '#').exists() or descendants().where(ofType(canonical) = '#').exists()).not()).trace('unmatched', id).empty()` dom-6: A resource should have narrative for robust management text.`div`.exists() dom-5: If a resource is contained in another resource, it SHALL NOT have a security label `contained.meta.security.empty()` Mappings rim: n/a rim: Entity. Role, or Act rim: Entity, Role, or Act workflow: Event w5: infrastructure.documents rim: Document[classCode="DOC" and moodCode="EVN" and isNormalAct()] cda: ClinicalDocument fhirdocumentreference: when described by DocumentReference
search	Σ C	0..1	BackboneElement	There are no (further) constraints on this element Element id Bundle.entry:cardiologyreport.search Short description Search related information Definition Information about the search process that lead to the creation of this entry. Data type BackboneElement Conditions The cardinality or value of this element may be affected by these constraints: bdl-2 Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
id		0..1	string	There are no (further) constraints on this element Element id Bundle.entry:cardiologyreport.search.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Conditions The cardinality or value of this element may be affected by these constraints: ele-1 Mappings rim: n/a
extension	C	0..*	Extension	There are no (further) constraints on this element Element id Bundle.entry:cardiologyreport.search.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Slicing Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! C	0..*	Extension	There are no (further) constraints on this element Element id Bundle.entry:cardiologyreport.search.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
mode	Σ	0..1	codeBinding	There are no (further) constraints on this element Element id Bundle.entry:cardiologyreport.search.mode Short description match \| include - why this is in the result set Definition Why this entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process. Comments There is only one mode. In some corner cases, a resource may be included because it is both a match and an include. In these circumstances, 'match' takes precedence. Data type code Binding Why an entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process. SearchEntryMode (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
score	Σ	0..1	decimal	There are no (further) constraints on this element Element id Bundle.entry:cardiologyreport.search.score Short description Search ranking (between 0 and 1) Definition When searching, the server's search ranking score for the entry. Comments Servers are not required to return a ranking score. 1 is most relevant, and 0 is least relevant. Often, search results are sorted by score, but the client may specify a different sort order. See Patient Match for the EMPI search which relates to this element. Data type decimal Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
request	Σ C	0..1	BackboneElement	There are no (further) constraints on this element Element id Bundle.entry:cardiologyreport.request Short description Additional execution information (transaction/batch/history) Definition Additional information about how this entry should be processed as part of a transaction or batch. For history, it shows how the entry was processed to create the version contained in the entry. Data type BackboneElement Conditions The cardinality or value of this element may be affected by these constraints: bdl-3a, bdl-3b, bdl-5 Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
id		0..1	string	There are no (further) constraints on this element Element id Bundle.entry:cardiologyreport.request.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Conditions The cardinality or value of this element may be affected by these constraints: ele-1 Mappings rim: n/a
extension	C	0..*	Extension	There are no (further) constraints on this element Element id Bundle.entry:cardiologyreport.request.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Slicing Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! C	0..*	Extension	There are no (further) constraints on this element Element id Bundle.entry:cardiologyreport.request.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
method	Σ C	1..1	codeBinding	There are no (further) constraints on this element Element id Bundle.entry:cardiologyreport.request.method Short description GET \| HEAD \| POST \| PUT \| DELETE \| PATCH Definition In a transaction or batch, this is the HTTP action to be executed for this entry. In a history bundle, this indicates the HTTP action that occurred. Comments Note that FHIR strings SHALL NOT exceed 1,048,576 (10241024) characters in size Data type* code Binding HTTP verbs (in the HTTP command line). See HTTP rfc for details. HTTPVerb (required) Conditions The cardinality or value of this element may be affected by these constraints: bdl-3b, bdl-3c, bdl-14, bdl-15 Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
url	Σ	1..1	uri	There are no (further) constraints on this element Element id Bundle.entry:cardiologyreport.request.url Short description URL for HTTP equivalent of this entry Definition The URL for this entry, relative to the root (the address to which the request is posted). Comments E.g. for a Patient Create, the method would be "POST" and the URL would be "Patient". For a Patient Update, the method would be PUT and the URL would be "Patient/[id]". Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
ifNoneMatch	Σ	0..1	string	There are no (further) constraints on this element Element id Bundle.entry:cardiologyreport.request.ifNoneMatch Short description For managing cache validation Definition If the ETag values match, return a 304 Not Modified status. See the API documentation for "Conditional Read". Comments Note that FHIR strings SHALL NOT exceed 1,048,576 (10241024) characters in size Data type* string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
ifModifiedSince	Σ	0..1	instant	There are no (further) constraints on this element Element id Bundle.entry:cardiologyreport.request.ifModifiedSince Short description For managing cache currency Definition Only perform the operation if the last updated date matches. See the API documentation for "Conditional Read". Comments Note: This is intended for where precisely observed times are required, typically system logs etc., and not human-reported times - for them, see date and dateTime (which can be as precise as instant, but is not required to be) below. UTC offset is always required Data type instant Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
ifMatch	Σ	0..1	string	There are no (further) constraints on this element Element id Bundle.entry:cardiologyreport.request.ifMatch Short description For managing update contention Definition Only perform the operation if the Etag value matches. For more information, see the API section "Managing Resource Contention". Comments Note that FHIR strings SHALL NOT exceed 1,048,576 (10241024) characters in size Data type* string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
ifNoneExist	Σ	0..1	string	There are no (further) constraints on this element Element id Bundle.entry:cardiologyreport.request.ifNoneExist Short description For conditional creates Definition Instruct the server not to perform the create if a specified resource already exists. For further information, see the API documentation for "Conditional Create". This is just the query portion of the URL - what follows the "?" (not including the "?"). Comments Note that FHIR strings SHALL NOT exceed 1,048,576 (10241024) characters in size Data type* string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
response	Σ C	0..1	BackboneElement	There are no (further) constraints on this element Element id Bundle.entry:cardiologyreport.response Short description Results of execution (transaction/batch/history) Definition Indicates the results of processing the corresponding 'request' entry in the batch or transaction being responded to or what the results of an operation where when returning history. Data type BackboneElement Conditions The cardinality or value of this element may be affected by these constraints: bdl-3a, bdl-3b, bdl-3d, bdl-5 Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
id		0..1	string	There are no (further) constraints on this element Element id Bundle.entry:cardiologyreport.response.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Conditions The cardinality or value of this element may be affected by these constraints: ele-1 Mappings rim: n/a
extension	C	0..*	Extension	There are no (further) constraints on this element Element id Bundle.entry:cardiologyreport.response.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Slicing Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! C	0..*	Extension	There are no (further) constraints on this element Element id Bundle.entry:cardiologyreport.response.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
status	Σ	1..1	string	There are no (further) constraints on this element Element id Bundle.entry:cardiologyreport.response.status Short description Status response code (text optional) Definition The status code returned by processing this entry. The status SHALL start with a 3 digit HTTP code (e.g. 404) and may contain the standard HTTP description associated with the status code. Comments Note that FHIR strings SHALL NOT exceed 1,048,576 (10241024) characters in size Data type* string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
location	Σ	0..1	uri	There are no (further) constraints on this element Element id Bundle.entry:cardiologyreport.response.location Short description The location (if the operation returns a location) Definition The location header created by processing this operation, populated if the operation returns a location. Comments see http://en.wikipedia.org/wiki/Uniform_resource_identifier Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
etag	Σ	0..1	string	There are no (further) constraints on this element Element id Bundle.entry:cardiologyreport.response.etag Short description The Etag for the resource (if relevant) Definition The Etag for the resource, if the operation for the entry produced a versioned resource (see Resource Metadata and Versioning and Managing Resource Contention). Comments Etags match the Resource.meta.versionId. The ETag has to match the version id in the header if a resource is included. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
lastModified	Σ	0..1	instant	There are no (further) constraints on this element Element id Bundle.entry:cardiologyreport.response.lastModified Short description Server's date time modified Definition The date/time that the resource was modified on the server. Comments This has to match the same time in the meta header (meta.lastUpdated) if a resource is included. Data type instant Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
outcome	Σ	0..1	Resource	There are no (further) constraints on this element Element id Bundle.entry:cardiologyreport.response.outcome Short description OperationOutcome with hints and warnings (for batch/transaction) Definition An OperationOutcome containing hints and warnings produced as part of processing this entry in a batch or transaction. Comments For a POST/PUT operation, this is the equivalent outcome that would be returned for prefer = operationoutcome - except that the resource is always returned whether or not the outcome is returned. This outcome is not used for error responses in batch/transaction, only for hints and warnings. In a batch operation, the error will be in Bundle.entry.response, and for transaction, there will be a single OperationOutcome instead of a bundle in the case of an error. Data type Resource Mappings rim: n/a rim: Entity. Role, or Act
procedure	Σ C	1..*	BackboneElement	There are no (further) constraints on this element Element id Bundle.entry:procedure Short description Entry in the bundle - will have a resource or information Definition An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only). Data type BackboneElement Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` bdl-8: fullUrl cannot be a version specific reference `fullUrl.exists() implies fullUrl.contains('/_history/').not()` bdl-5: must be a resource unless there's a request or response `resource.exists() or request.exists() or response.exists()` Mappings rim: n/a
id		0..1	string	There are no (further) constraints on this element Element id Bundle.entry:procedure.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Conditions The cardinality or value of this element may be affected by these constraints: ele-1 Mappings rim: n/a
extension	C	0..*	Extension	There are no (further) constraints on this element Element id Bundle.entry:procedure.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Slicing Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! C	0..*	Extension	There are no (further) constraints on this element Element id Bundle.entry:procedure.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
link	Σ	0..*	see (link)	There are no (further) constraints on this element Element id Bundle.entry:procedure.link Short description Links related to this entry Definition A series of links that provide context to this entry.
fullUrl	Σ C	0..1	uri	There are no (further) constraints on this element Element id Bundle.entry:procedure.fullUrl Short description URI for resource (e.g. the absolute URL server address, URI for UUID/OID, etc.) Definition The Absolute URL for the resource. Except for transactions and batches, each entry in a Bundle must have a fullUrl. The fullUrl SHALL NOT disagree with the id in the resource - i.e. if the fullUrl is not a urn:uuid, the URL shall be version-independent URL consistent with the Resource.id. The fullUrl is a version independent reference to the resource. Even when not required, fullUrl MAY be set to a urn:uuid to allow referencing entries in a transaction. The fullUrl can be an arbitrary URI and is not limited to urn:uuid, urn:oid, http, and https. The fullUrl element SHALL have a value except when: invoking a create invoking or responding to an operation where the body is not a single identified resource invoking or returning the results of a search or history operation. Comments fullUrl might not be unique in the context of a resource. Note that since FHIR resources do not need to be served through the FHIR API, the fullURL might be a URN or an absolute URL that does not end with the logical id of the resource (Resource.id). However, but if the fullUrl does look like a RESTful server URL (e.g. meets the regex, then the 'id' portion of the fullUrl SHALL end with the Resource.id. Note that the fullUrl is not the same as the canonical URL - it's an absolute url for an endpoint serving the resource (these will happen to have the same value on the canonical server for the resource with the canonical URL). Data type uri Conditions The cardinality or value of this element may be affected by these constraints: bdl-7, bdl-15, bdl-8 Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
resource	Σ C	0..1	Procedure	Element id Bundle.entry:procedure.resource Short description An action that is being or was performed on an individual or entity Definition An action that is or was performed on or for a patient, practitioner, device, organization, or location. For example, this can be a physical intervention on a patient like an operation, or less invasive like long term services, counseling, or hypnotherapy. This can be a quality or safety inspection for a location, organization, or device. This can be an accreditation procedure on a practitioner for licensing. Data type Procedure Conditions The cardinality or value of this element may be affected by these constraints: bdl-3a, bdl-3b, bdl-3c, bdl-7, bdl-11, bdl-12, bdl-13, bdl-5 Constraints dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources `contained.contained.empty()` dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated `contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()` dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource `contained.where((('#'+id in (%resource.descendants().reference \| %resource.descendants().ofType(canonical) \| %resource.descendants().ofType(uri) \| %resource.descendants().ofType(url))) or descendants().where(reference = '#').exists() or descendants().where(ofType(canonical) = '#').exists() or descendants().where(ofType(canonical) = '#').exists()).not()).trace('unmatched', id).empty()` dom-6: A resource should have narrative for robust management text.`div`.exists() dom-5: If a resource is contained in another resource, it SHALL NOT have a security label `contained.meta.security.empty()` Mappings rim: n/a rim: Entity. Role, or Act rim: Entity, Role, or Act workflow: Event w5: clinical.general rim: Procedure[moodCode=EVN]
search	Σ C	0..1	BackboneElement	There are no (further) constraints on this element Element id Bundle.entry:procedure.search Short description Search related information Definition Information about the search process that lead to the creation of this entry. Data type BackboneElement Conditions The cardinality or value of this element may be affected by these constraints: bdl-2 Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
id		0..1	string	There are no (further) constraints on this element Element id Bundle.entry:procedure.search.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Conditions The cardinality or value of this element may be affected by these constraints: ele-1 Mappings rim: n/a
extension	C	0..*	Extension	There are no (further) constraints on this element Element id Bundle.entry:procedure.search.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Slicing Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! C	0..*	Extension	There are no (further) constraints on this element Element id Bundle.entry:procedure.search.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
mode	Σ	0..1	codeBinding	There are no (further) constraints on this element Element id Bundle.entry:procedure.search.mode Short description match \| include - why this is in the result set Definition Why this entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process. Comments There is only one mode. In some corner cases, a resource may be included because it is both a match and an include. In these circumstances, 'match' takes precedence. Data type code Binding Why an entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process. SearchEntryMode (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
score	Σ	0..1	decimal	There are no (further) constraints on this element Element id Bundle.entry:procedure.search.score Short description Search ranking (between 0 and 1) Definition When searching, the server's search ranking score for the entry. Comments Servers are not required to return a ranking score. 1 is most relevant, and 0 is least relevant. Often, search results are sorted by score, but the client may specify a different sort order. See Patient Match for the EMPI search which relates to this element. Data type decimal Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
request	Σ C	0..1	BackboneElement	There are no (further) constraints on this element Element id Bundle.entry:procedure.request Short description Additional execution information (transaction/batch/history) Definition Additional information about how this entry should be processed as part of a transaction or batch. For history, it shows how the entry was processed to create the version contained in the entry. Data type BackboneElement Conditions The cardinality or value of this element may be affected by these constraints: bdl-3a, bdl-3b, bdl-5 Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
id		0..1	string	There are no (further) constraints on this element Element id Bundle.entry:procedure.request.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Conditions The cardinality or value of this element may be affected by these constraints: ele-1 Mappings rim: n/a
extension	C	0..*	Extension	There are no (further) constraints on this element Element id Bundle.entry:procedure.request.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Slicing Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! C	0..*	Extension	There are no (further) constraints on this element Element id Bundle.entry:procedure.request.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
method	Σ C	1..1	codeBinding	There are no (further) constraints on this element Element id Bundle.entry:procedure.request.method Short description GET \| HEAD \| POST \| PUT \| DELETE \| PATCH Definition In a transaction or batch, this is the HTTP action to be executed for this entry. In a history bundle, this indicates the HTTP action that occurred. Comments Note that FHIR strings SHALL NOT exceed 1,048,576 (10241024) characters in size Data type* code Binding HTTP verbs (in the HTTP command line). See HTTP rfc for details. HTTPVerb (required) Conditions The cardinality or value of this element may be affected by these constraints: bdl-3b, bdl-3c, bdl-14, bdl-15 Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
url	Σ	1..1	uri	There are no (further) constraints on this element Element id Bundle.entry:procedure.request.url Short description URL for HTTP equivalent of this entry Definition The URL for this entry, relative to the root (the address to which the request is posted). Comments E.g. for a Patient Create, the method would be "POST" and the URL would be "Patient". For a Patient Update, the method would be PUT and the URL would be "Patient/[id]". Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
ifNoneMatch	Σ	0..1	string	There are no (further) constraints on this element Element id Bundle.entry:procedure.request.ifNoneMatch Short description For managing cache validation Definition If the ETag values match, return a 304 Not Modified status. See the API documentation for "Conditional Read". Comments Note that FHIR strings SHALL NOT exceed 1,048,576 (10241024) characters in size Data type* string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
ifModifiedSince	Σ	0..1	instant	There are no (further) constraints on this element Element id Bundle.entry:procedure.request.ifModifiedSince Short description For managing cache currency Definition Only perform the operation if the last updated date matches. See the API documentation for "Conditional Read". Comments Note: This is intended for where precisely observed times are required, typically system logs etc., and not human-reported times - for them, see date and dateTime (which can be as precise as instant, but is not required to be) below. UTC offset is always required Data type instant Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
ifMatch	Σ	0..1	string	There are no (further) constraints on this element Element id Bundle.entry:procedure.request.ifMatch Short description For managing update contention Definition Only perform the operation if the Etag value matches. For more information, see the API section "Managing Resource Contention". Comments Note that FHIR strings SHALL NOT exceed 1,048,576 (10241024) characters in size Data type* string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
ifNoneExist	Σ	0..1	string	There are no (further) constraints on this element Element id Bundle.entry:procedure.request.ifNoneExist Short description For conditional creates Definition Instruct the server not to perform the create if a specified resource already exists. For further information, see the API documentation for "Conditional Create". This is just the query portion of the URL - what follows the "?" (not including the "?"). Comments Note that FHIR strings SHALL NOT exceed 1,048,576 (10241024) characters in size Data type* string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
response	Σ C	0..1	BackboneElement	There are no (further) constraints on this element Element id Bundle.entry:procedure.response Short description Results of execution (transaction/batch/history) Definition Indicates the results of processing the corresponding 'request' entry in the batch or transaction being responded to or what the results of an operation where when returning history. Data type BackboneElement Conditions The cardinality or value of this element may be affected by these constraints: bdl-3a, bdl-3b, bdl-3d, bdl-5 Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
id		0..1	string	There are no (further) constraints on this element Element id Bundle.entry:procedure.response.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Conditions The cardinality or value of this element may be affected by these constraints: ele-1 Mappings rim: n/a
extension	C	0..*	Extension	There are no (further) constraints on this element Element id Bundle.entry:procedure.response.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Slicing Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! C	0..*	Extension	There are no (further) constraints on this element Element id Bundle.entry:procedure.response.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
status	Σ	1..1	string	There are no (further) constraints on this element Element id Bundle.entry:procedure.response.status Short description Status response code (text optional) Definition The status code returned by processing this entry. The status SHALL start with a 3 digit HTTP code (e.g. 404) and may contain the standard HTTP description associated with the status code. Comments Note that FHIR strings SHALL NOT exceed 1,048,576 (10241024) characters in size Data type* string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
location	Σ	0..1	uri	There are no (further) constraints on this element Element id Bundle.entry:procedure.response.location Short description The location (if the operation returns a location) Definition The location header created by processing this operation, populated if the operation returns a location. Comments see http://en.wikipedia.org/wiki/Uniform_resource_identifier Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
etag	Σ	0..1	string	There are no (further) constraints on this element Element id Bundle.entry:procedure.response.etag Short description The Etag for the resource (if relevant) Definition The Etag for the resource, if the operation for the entry produced a versioned resource (see Resource Metadata and Versioning and Managing Resource Contention). Comments Etags match the Resource.meta.versionId. The ETag has to match the version id in the header if a resource is included. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
lastModified	Σ	0..1	instant	There are no (further) constraints on this element Element id Bundle.entry:procedure.response.lastModified Short description Server's date time modified Definition The date/time that the resource was modified on the server. Comments This has to match the same time in the meta header (meta.lastUpdated) if a resource is included. Data type instant Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
outcome	Σ	0..1	Resource	There are no (further) constraints on this element Element id Bundle.entry:procedure.response.outcome Short description OperationOutcome with hints and warnings (for batch/transaction) Definition An OperationOutcome containing hints and warnings produced as part of processing this entry in a batch or transaction. Comments For a POST/PUT operation, this is the equivalent outcome that would be returned for prefer = operationoutcome - except that the resource is always returned whether or not the outcome is returned. This outcome is not used for error responses in batch/transaction, only for hints and warnings. In a batch operation, the error will be in Bundle.entry.response, and for transaction, there will be a single OperationOutcome instead of a bundle in the case of an error. Data type Resource Mappings rim: n/a rim: Entity. Role, or Act
fileAttachment	Σ C	0..*	BackboneElement	There are no (further) constraints on this element Element id Bundle.entry:fileAttachment Short description Entry in the bundle - will have a resource or information Definition An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only). Data type BackboneElement Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` bdl-8: fullUrl cannot be a version specific reference `fullUrl.exists() implies fullUrl.contains('/_history/').not()` bdl-5: must be a resource unless there's a request or response `resource.exists() or request.exists() or response.exists()` Mappings rim: n/a
id		0..1	string	There are no (further) constraints on this element Element id Bundle.entry:fileAttachment.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Conditions The cardinality or value of this element may be affected by these constraints: ele-1 Mappings rim: n/a
extension	C	0..*	Extension	There are no (further) constraints on this element Element id Bundle.entry:fileAttachment.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Slicing Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! C	0..*	Extension	There are no (further) constraints on this element Element id Bundle.entry:fileAttachment.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
link	Σ	0..*	see (link)	There are no (further) constraints on this element Element id Bundle.entry:fileAttachment.link Short description Links related to this entry Definition A series of links that provide context to this entry.
fullUrl	Σ C	0..1	uri	There are no (further) constraints on this element Element id Bundle.entry:fileAttachment.fullUrl Short description URI for resource (e.g. the absolute URL server address, URI for UUID/OID, etc.) Definition The Absolute URL for the resource. Except for transactions and batches, each entry in a Bundle must have a fullUrl. The fullUrl SHALL NOT disagree with the id in the resource - i.e. if the fullUrl is not a urn:uuid, the URL shall be version-independent URL consistent with the Resource.id. The fullUrl is a version independent reference to the resource. Even when not required, fullUrl MAY be set to a urn:uuid to allow referencing entries in a transaction. The fullUrl can be an arbitrary URI and is not limited to urn:uuid, urn:oid, http, and https. The fullUrl element SHALL have a value except when: invoking a create invoking or responding to an operation where the body is not a single identified resource invoking or returning the results of a search or history operation. Comments fullUrl might not be unique in the context of a resource. Note that since FHIR resources do not need to be served through the FHIR API, the fullURL might be a URN or an absolute URL that does not end with the logical id of the resource (Resource.id). However, but if the fullUrl does look like a RESTful server URL (e.g. meets the regex, then the 'id' portion of the fullUrl SHALL end with the Resource.id. Note that the fullUrl is not the same as the canonical URL - it's an absolute url for an endpoint serving the resource (these will happen to have the same value on the canonical server for the resource with the canonical URL). Data type uri Conditions The cardinality or value of this element may be affected by these constraints: bdl-7, bdl-15, bdl-8 Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
resource	Σ C	0..1	FileAttachment	Element id Bundle.entry:fileAttachment.resource Short description A reference to a document Definition A reference to a document of any kind for any purpose. While the term “document” implies a more narrow focus, for this resource this "document" encompasses any serialized object with a mime-type, it includes formal patient-centric documents (CDA), clinical notes, scanned paper, non-patient specific documents like policy text, as well as a photo, video, or audio recording acquired or used in healthcare. The DocumentReference resource provides metadata about the document so that the document can be discovered and managed. The actual content may be inline base64 encoded data or provided by direct reference. Comments Usually, this is used for documents other than those defined by FHIR. Data type FileAttachment Conditions The cardinality or value of this element may be affected by these constraints: bdl-3a, bdl-3b, bdl-3c, bdl-7, bdl-11, bdl-12, bdl-13, bdl-5 Constraints dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources `contained.contained.empty()` dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated `contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()` dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource `contained.where((('#'+id in (%resource.descendants().reference \| %resource.descendants().ofType(canonical) \| %resource.descendants().ofType(uri) \| %resource.descendants().ofType(url))) or descendants().where(reference = '#').exists() or descendants().where(ofType(canonical) = '#').exists() or descendants().where(ofType(canonical) = '#').exists()).not()).trace('unmatched', id).empty()` dom-6: A resource should have narrative for robust management text.`div`.exists() dom-5: If a resource is contained in another resource, it SHALL NOT have a security label `contained.meta.security.empty()` docRef-1: facilityType SHALL only be present if context is not an encounter `facilityType.empty() or context.where(resolve() is Encounter).empty()` docRef-2: practiceSetting SHALL only be present if context is not present `practiceSetting.empty() or context.where(resolve() is Encounter).empty()` Mappings rim: n/a rim: Entity. Role, or Act rim: Entity, Role, or Act workflow: Event w5: infrastructure.documents fhircomposition: when describing a Composition rim: Document[classCode="DOC" and moodCode="EVN"] xds: DocumentEntry cda: when describing a CDA
search	Σ C	0..1	BackboneElement	There are no (further) constraints on this element Element id Bundle.entry:fileAttachment.search Short description Search related information Definition Information about the search process that lead to the creation of this entry. Data type BackboneElement Conditions The cardinality or value of this element may be affected by these constraints: bdl-2 Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
id		0..1	string	There are no (further) constraints on this element Element id Bundle.entry:fileAttachment.search.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Conditions The cardinality or value of this element may be affected by these constraints: ele-1 Mappings rim: n/a
extension	C	0..*	Extension	There are no (further) constraints on this element Element id Bundle.entry:fileAttachment.search.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Slicing Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! C	0..*	Extension	There are no (further) constraints on this element Element id Bundle.entry:fileAttachment.search.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
mode	Σ	0..1	codeBinding	There are no (further) constraints on this element Element id Bundle.entry:fileAttachment.search.mode Short description match \| include - why this is in the result set Definition Why this entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process. Comments There is only one mode. In some corner cases, a resource may be included because it is both a match and an include. In these circumstances, 'match' takes precedence. Data type code Binding Why an entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process. SearchEntryMode (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
score	Σ	0..1	decimal	There are no (further) constraints on this element Element id Bundle.entry:fileAttachment.search.score Short description Search ranking (between 0 and 1) Definition When searching, the server's search ranking score for the entry. Comments Servers are not required to return a ranking score. 1 is most relevant, and 0 is least relevant. Often, search results are sorted by score, but the client may specify a different sort order. See Patient Match for the EMPI search which relates to this element. Data type decimal Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
request	Σ C	0..1	BackboneElement	There are no (further) constraints on this element Element id Bundle.entry:fileAttachment.request Short description Additional execution information (transaction/batch/history) Definition Additional information about how this entry should be processed as part of a transaction or batch. For history, it shows how the entry was processed to create the version contained in the entry. Data type BackboneElement Conditions The cardinality or value of this element may be affected by these constraints: bdl-3a, bdl-3b, bdl-5 Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
id		0..1	string	There are no (further) constraints on this element Element id Bundle.entry:fileAttachment.request.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Conditions The cardinality or value of this element may be affected by these constraints: ele-1 Mappings rim: n/a
extension	C	0..*	Extension	There are no (further) constraints on this element Element id Bundle.entry:fileAttachment.request.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Slicing Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! C	0..*	Extension	There are no (further) constraints on this element Element id Bundle.entry:fileAttachment.request.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
method	Σ C	1..1	codeBinding	There are no (further) constraints on this element Element id Bundle.entry:fileAttachment.request.method Short description GET \| HEAD \| POST \| PUT \| DELETE \| PATCH Definition In a transaction or batch, this is the HTTP action to be executed for this entry. In a history bundle, this indicates the HTTP action that occurred. Comments Note that FHIR strings SHALL NOT exceed 1,048,576 (10241024) characters in size Data type* code Binding HTTP verbs (in the HTTP command line). See HTTP rfc for details. HTTPVerb (required) Conditions The cardinality or value of this element may be affected by these constraints: bdl-3b, bdl-3c, bdl-14, bdl-15 Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
url	Σ	1..1	uri	There are no (further) constraints on this element Element id Bundle.entry:fileAttachment.request.url Short description URL for HTTP equivalent of this entry Definition The URL for this entry, relative to the root (the address to which the request is posted). Comments E.g. for a Patient Create, the method would be "POST" and the URL would be "Patient". For a Patient Update, the method would be PUT and the URL would be "Patient/[id]". Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
ifNoneMatch	Σ	0..1	string	There are no (further) constraints on this element Element id Bundle.entry:fileAttachment.request.ifNoneMatch Short description For managing cache validation Definition If the ETag values match, return a 304 Not Modified status. See the API documentation for "Conditional Read". Comments Note that FHIR strings SHALL NOT exceed 1,048,576 (10241024) characters in size Data type* string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
ifModifiedSince	Σ	0..1	instant	There are no (further) constraints on this element Element id Bundle.entry:fileAttachment.request.ifModifiedSince Short description For managing cache currency Definition Only perform the operation if the last updated date matches. See the API documentation for "Conditional Read". Comments Note: This is intended for where precisely observed times are required, typically system logs etc., and not human-reported times - for them, see date and dateTime (which can be as precise as instant, but is not required to be) below. UTC offset is always required Data type instant Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
ifMatch	Σ	0..1	string	There are no (further) constraints on this element Element id Bundle.entry:fileAttachment.request.ifMatch Short description For managing update contention Definition Only perform the operation if the Etag value matches. For more information, see the API section "Managing Resource Contention". Comments Note that FHIR strings SHALL NOT exceed 1,048,576 (10241024) characters in size Data type* string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
ifNoneExist	Σ	0..1	string	There are no (further) constraints on this element Element id Bundle.entry:fileAttachment.request.ifNoneExist Short description For conditional creates Definition Instruct the server not to perform the create if a specified resource already exists. For further information, see the API documentation for "Conditional Create". This is just the query portion of the URL - what follows the "?" (not including the "?"). Comments Note that FHIR strings SHALL NOT exceed 1,048,576 (10241024) characters in size Data type* string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
response	Σ C	0..1	BackboneElement	There are no (further) constraints on this element Element id Bundle.entry:fileAttachment.response Short description Results of execution (transaction/batch/history) Definition Indicates the results of processing the corresponding 'request' entry in the batch or transaction being responded to or what the results of an operation where when returning history. Data type BackboneElement Conditions The cardinality or value of this element may be affected by these constraints: bdl-3a, bdl-3b, bdl-3d, bdl-5 Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
id		0..1	string	There are no (further) constraints on this element Element id Bundle.entry:fileAttachment.response.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Conditions The cardinality or value of this element may be affected by these constraints: ele-1 Mappings rim: n/a
extension	C	0..*	Extension	There are no (further) constraints on this element Element id Bundle.entry:fileAttachment.response.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Slicing Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! C	0..*	Extension	There are no (further) constraints on this element Element id Bundle.entry:fileAttachment.response.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
status	Σ	1..1	string	There are no (further) constraints on this element Element id Bundle.entry:fileAttachment.response.status Short description Status response code (text optional) Definition The status code returned by processing this entry. The status SHALL start with a 3 digit HTTP code (e.g. 404) and may contain the standard HTTP description associated with the status code. Comments Note that FHIR strings SHALL NOT exceed 1,048,576 (10241024) characters in size Data type* string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
location	Σ	0..1	uri	There are no (further) constraints on this element Element id Bundle.entry:fileAttachment.response.location Short description The location (if the operation returns a location) Definition The location header created by processing this operation, populated if the operation returns a location. Comments see http://en.wikipedia.org/wiki/Uniform_resource_identifier Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
etag	Σ	0..1	string	There are no (further) constraints on this element Element id Bundle.entry:fileAttachment.response.etag Short description The Etag for the resource (if relevant) Definition The Etag for the resource, if the operation for the entry produced a versioned resource (see Resource Metadata and Versioning and Managing Resource Contention). Comments Etags match the Resource.meta.versionId. The ETag has to match the version id in the header if a resource is included. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
lastModified	Σ	0..1	instant	There are no (further) constraints on this element Element id Bundle.entry:fileAttachment.response.lastModified Short description Server's date time modified Definition The date/time that the resource was modified on the server. Comments This has to match the same time in the meta header (meta.lastUpdated) if a resource is included. Data type instant Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
outcome	Σ	0..1	Resource	There are no (further) constraints on this element Element id Bundle.entry:fileAttachment.response.outcome Short description OperationOutcome with hints and warnings (for batch/transaction) Definition An OperationOutcome containing hints and warnings produced as part of processing this entry in a batch or transaction. Comments For a POST/PUT operation, this is the equivalent outcome that would be returned for prefer = operationoutcome - except that the resource is always returned whether or not the outcome is returned. This outcome is not used for error responses in batch/transaction, only for hints and warnings. In a batch operation, the error will be in Bundle.entry.response, and for transaction, there will be a single OperationOutcome instead of a bundle in the case of an error. Data type Resource Mappings rim: n/a rim: Entity. Role, or Act
signature	Σ	0..1	Signature	There are no (further) constraints on this element Element id Bundle.signature Short description Digital Signature Definition Digital Signature - base64 encoded. XML-DSig or a JWS. Requirements A Signature holds an electronic representation of a signature and its supporting context in a FHIR accessible form. The signature may either be a cryptographic type (XML DigSig or a JWS), which is able to provide non-repudiation proof, or it may be a graphical image that represents a signature or a signature process. This element allows capturing signatures on documents, messages, transactions or even search responses, to support content-authentication, non-repudiation or other business cases. This is primarily relevant where the bundle may travel through multiple hops or via other mechanisms where HTTPS non-repudiation is insufficient. Comments The signature could be created by the "author" of the bundle or by the originating device. Requirements around inclusion of a signature, verification of signatures and treatment of signed/non-signed bundles is implementation-environment specific. Data type Signature Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: N/A
issues	Σ C	0..1	OperationOutcome	There are no (further) constraints on this element Element id Bundle.issues Short description Issues with the Bundle Definition Captures issues and warnings that relate to the construction of the Bundle and the content within it. Comments Usage notes: These issues and warnings must apply to the Bundle as a whole, not to individual entries.Messages relating to the processing of individual entries (e.g. in a batch or transaction) SHALL be reported in the entry.response.outcome for that entry. If there are errors that arise in the creation of the Bundle, then that should be handled by an OperationOutcome being returned instead of the Bundle. Data type OperationOutcome Conditions The cardinality or value of this element may be affected by these constraints: bdl-16, bdl-17 Constraints dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources `contained.contained.empty()` dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated `contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()` dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource `contained.where((('#'+id in (%resource.descendants().reference \| %resource.descendants().ofType(canonical) \| %resource.descendants().ofType(uri) \| %resource.descendants().ofType(url))) or descendants().where(reference = '#').exists() or descendants().where(ofType(canonical) = '#').exists() or descendants().where(ofType(canonical) = '#').exists()).not()).trace('unmatched', id).empty()` dom-6: A resource should have narrative for robust management text.`div`.exists() dom-5: If a resource is contained in another resource, it SHALL NOT have a security label `contained.meta.security.empty()` Mappings rim: n/a rim: Entity. Role, or Act rim: Entity, Role, or Act w5: infrastructure.exchange rim: Grouping is handled through multiple repetitions from whatever context references the outcomes (no specific grouper required)

{

"resourceType": "Bundle",

"type": "transaction-response",

"entry": [

{

"response": {

"status": "201 Created",
"location": "Composition/composition-cardiology-001/_history/1",
"etag": "1",
"lastModified": "2026-02-10T10:30:00.1+08:00"

}

{

"response": {

"status": "201 Created",
"location": "Procedure/procedure-echo-001/_history/1",
"etag": "1",
"lastModified": "2026-02-10T10:30:00.101+08:00"

}

{

"response": {

"status": "201 Created",
"location": "Procedure/procedure-cath-001/_history/1",
"etag": "1",
"lastModified": "2026-02-10T10:30:00.102+08:00"

}

{

"response": {

"status": "201 Created",
"location": "DocumentReference/fileattachment-001/_history/1",
"etag": "1",
"lastModified": "2026-02-10T10:30:00.103+08:00"

}

]

}

Business Level Errors

This section details the business level errors exposed by OperationOutcome resource for this operation. Refer to API Error Handling for framework level errors.

For illustration only

http status code	code	details.coding.code	details.text
404	not-found	E-10000	No matching patient found based on NRIC, Date of Birth and Gender
404	not-found	E-10001	Institution code for group organization is not found
404	not-found	E-10002	Group Organization code is not found
400	business-rule	E-10003	Patient is not currently enrolled to the organization
400	duplicate	E-10004	An attempt was made to create a duplicate record