NICE FHIR Implementation Guide

NICE-Medication

Description

This profile is for submitting data to the NICE about the administration of medication to the patient.

Click here to go to the NICE-Medication Simplifier page

NICE data dictionary links

MDS	SOFA	Sepsis	Capacity
Chronic Obstructive Pulmonary Disease	Highest adrenaline speed	Highest dopamine speed (Sepsis)	Continuous intravenous administration of antiarrythmics
Diabetes	Dobutamine administration	Dobutamine administration (Sepsis)	Administration of arterial medication
Immunological insuffiency	Highest dopamine speed	Administration of phospodiesterase inhibitors	Anticoagulation
Thrombolytic therapy following acute myocardial infarction	Highest noradrenaline speed	Highest adrenaline speed (Sepsis)	Nutrition - parenteral
Vasoactive medication	Administration of phospodiesterase inhibitors	Highest noradrenaline speed (Sepsis)	Antibiotics (IV)

Source

This profile is used to submit medication related information to the Dutch National Intensive Care Evaluation (NICE). It was derived from the Nictiz Health and Care Information Model (HCIM; Dutch: Zorginformatiebouwsteen or ZIB) Medication, 2017 release version 3.1

Medication	I		Medication	There are no (further) constraints on this element Element id Medication Short description Product Alternate names Geneesmiddel Definition Root concept of the Product partial information model. This root concept contains all data elements of the Product partial information model. The prescribed product is usually a medicine. However, medical aids and bandages can also be prescribed and supplied via the pharmacy. Strictly speaking, food and blood products do not belong in the medication category, but can be prescribed and supplied by a pharmacy as well. A type of medication can be indicated with a single codeThat code can be chosen from several possible coding systems (concretely: GPK, PRK, HPK or article numbers). Correct use of these codes in the software systems will sufficiently record the composition of the product used, making a complete product specification unnecessary. In addition to a primary code, alternative codes from other coding systems can also be entered (so that the GPK can be sent along in the event that the patient was registered based on PRK, for example). Entering multiple ingredients will enable you to display a compound product. If one of the composite parts is liquid, the dosage will be given in milliliters; otherwise it will be given in ‘units’. In that case, the composition of the medicationcan be specified implicitly (with the use of a medication code) or explicitly, for example by listing the (active) substance(s) of the medication. Prescriptions to be prepared by the pharmacy can be entered as well. This can be done by means of the option listed above to enter coded ingredients and/or by entering the composition and preparation method as free text. Data type Medication Constraints dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources `contained.contained.empty()` dom-1: If the resource is contained in another resource, it SHALL NOT contain any narrative `contained.text.empty()` dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated `contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()` dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource `contained.where(('#'+id in %resource.descendants().reference).not()).empty()` Mappings rim: Entity. Role, or Act script10.6: NewRx/MedicationPrescribed -or- RxFill/MedicationDispensed -or- RxHistoryResponse/MedicationDispensed -or- RxHistoryResponse/MedicationPrescribed rim: ManufacturedProduct[classCode=ADMM] w5: clinical.medication hcim-pharmaceuticalproduct-v2.0-2017EN: NL-CM:9.7.19926
id	Σ	0..1	id	There are no (further) constraints on this element Element id Medication.id Short description Logical id of this artifact Definition The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes. Comments The only time that a resource does not have an id is when it is being submitted to the server using a create operation. Data type id Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a
meta	Σ	0..1	Meta	There are no (further) constraints on this element Element id Medication.meta Short description Metadata about the resource Definition The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content may not always be associated with version changes to the resource. Data type Meta Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a rim: N/A
implicitRules	Σ ?!	0..1	uri	There are no (further) constraints on this element Element id Medication.implicitRules Short description A set of rules under which this content was created Definition A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Comments Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. This element is labelled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a
language		0..1	codeBinding	There are no (further) constraints on this element Element id Medication.language Short description Language of the resource content Definition The base language in which the resource is written. Comments Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute). Data type code Binding A human language. Common Languages (extensible) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a
text	I	0..1	Narrative	There are no (further) constraints on this element Element id Medication.text Short description Text summary of the resource, for human interpretation Alternate names narrative, html, xhtml, display Definition A human-readable narrative that contains a summary of the resource, and may be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety. Comments Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded in formation is added later. Data type Narrative Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a rim: N/A rim: Act.text?
contained		0..*	Resource	There are no (further) constraints on this element Element id Medication.contained Short description Contained, inline Resources Alternate names inline resources, anonymous resources, contained resources Definition These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope. Comments This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Data type Resource Mappings rim: Entity. Role, or Act rim: N/A
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Medication.extension Short description Additional Content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the resource. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
description	I	0..1	Extension(string)	There are no (further) constraints on this element Element id Medication.extension:description Short description Description Alternate names extensions, user content, Omschrijving Definition A textual description of the type of medication (including relevant properties of the composition and preparation method if possible), which is only used if no coded indication from the G Standard is available (magistral preparation). Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension(string) Extension URL http://nictiz.nl/fhir/StructureDefinition/zib-Product-Description Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A hcim-pharmaceuticalproduct-v2.0-2017EN: NL-CM:9.7.19784
modifierExtension	?! I	0..*	Extension	There are no (further) constraints on this element Element id Medication.modifierExtension Short description Extensions that cannot be ignored Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the resource, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
code	Σ	0..1	CodeableConcept	Element id Medication.code Short description Codes that identify this medication Definition A code (or set of codes) that specify this medication, or a textual description if no code is available. Usage note: This could be a standard medication code such as a code from RxNorm, SNOMED CT, IDMP etc. It could also be a national or local formulary code, optionally with translations to other code systems. Only a few medication related codes are relevant for NICE, only codes pertaining to the ATC groups listed below will be processed [NICE dataelement : ATC-codes or ATC-(sub)group codes]: Chronic Obstructive Pulmonary Disease: R03 subgroup (Drugs for obstructive airway diseases) Diabetes: A10 subgroup (Dugs used in diabetes) Immunological insufficiency: L04 subgroup (Immunosuppressants) or H02 subgroup (Corticosteroid for systemic use) or L01 subgroup (Antineoplastic agents) Thrombolytic therapy following acute myocardial infarction: B01 subgroup (Antithrombotic agents) Vasoactive medication: C01CA/CE subgroup (adrenergic and dopaminergic agents) or H01BA subgroup (Vasopressin and analogues) Dobutamine administration: C01CA07 Highest adrenaline speed: B02BC09 Highest dopamine speed: C01CA04 Highest noradrenaline speed: C01CA24 Administration of phospodiesterase inhibitors: C01CE (Phospodiesterase inhibitors) Continuous intravenous administration of antiarrythmics: C01B (Antiarrhythmics) Administration of arterial medication: All (non-specified) Nutrition - parenteral: B05BA (Solutions for parenteral nutrition) Anticoagulation: B01 (Antithrombotic agents) Antibiotics (IV): J01 (Antibacterials) Comments Depending on the context of use, the code that was actually selected by the user (prescriber, dispenser, etc.) will have the coding.userSelected set to true. As described in the coding datatype: "A coding may be marked as a "userSelected" if a user selected the particular coded value in a user interface (e.g. the user selects an item in a pick-list). If a user selected coding exists, it is the preferred choice for performing translations etc. Data type CodeableConcept Binding A coded concept that defines the type of a medication SNOMED CT Medication Codes (example) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Examples Example of Medication code { "coding": [ { "system": "urn:oid:2.16.840.1.113883.2.4.4.8", "code": "13610554", "display": "Carbasalaatcalcium Sandoz 600 30 sac" } ] } Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD script10.6: coding.code = //element(,MedicationType)/DrugCoded/ProductCode coding.system = //element(,MedicationType)/DrugCoded/ProductCodeQualifier coding.display = //element(,MedicationType)/DrugDescription v2:* RXO-1.1-Requested Give Code.code / RXE-2.1-Give Code.code / RXD-2.1-Dispense/Give Code.code / RXG-4.1-Give Code.code /RXA-5.1-Administered Code.code / RXC-2.1 Component Code rim: .code w5: class NICE-Datadictionary-MDS: https://www.stichting-nice.nl/dd/#57 NICE-Datadictionary-MDS: https://www.stichting-nice.nl/dd/#78 NICE-Datadictionary-MDS: https://www.stichting-nice.nl/dd/#159 NICE-Datadictionary-MDS: https://www.stichting-nice.nl/dd/#411 NICE-Datadictionary-MDS: https://www.stichting-nice.nl/dd/#432 NICE-Datadictionary-SOFA: https://www.stichting-nice.nl/dd/#18 NICE-Datadictionary-SOFA: https://www.stichting-nice.nl/dd/#93 NICE-Datadictionary-SOFA: https://www.stichting-nice.nl/dd/#94 NICE-Datadictionary-SOFA: https://www.stichting-nice.nl/dd/#224 NICE-Datadictionary-SOFA: https://www.stichting-nice.nl/dd/#238 NICE-Datadictionary-Sepsis: https://www.stichting-nice.nl/dd/#740 NICE-Datadictionary-Sepsis: https://www.stichting-nice.nl/dd/#742 NICE-Datadictionary-Sepsis: https://www.stichting-nice.nl/dd/#743 NICE-Datadictionary-Sepsis: https://www.stichting-nice.nl/dd/#744 NICE-Datadictionary-Sepsis: https://www.stichting-nice.nl/dd/#745 NICE-Datadictionary-Capacity: https://www.stichting-nice.nl/dd/#572 NICE-Datadictionary-Capacity: https://www.stichting-nice.nl/dd/#576 NICE-Datadictionary-Capacity: https://www.stichting-nice.nl/dd/#599 NICE-Datadictionary-Capacity: https://www.stichting-nice.nl/dd/#611 NICE-Datadictionary-Capacity: https://www.stichting-nice.nl/dd/#625
id		0..1	string	There are no (further) constraints on this element Element id Medication.code.id Short description xml:id (or equivalent in JSON) Definition unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Medication.code.extension Short description Additional Content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
coding	Σ	0..*	Coding	There are no (further) constraints on this element Element id Medication.code.coding Short description MedicationCode Alternate names ProductCode, Geneesmiddel code Definition Coding medication in the Netherlands is done on the basis of the G standard (issued by Z-index), which is filled under the direction of KNMP. The coded medication can be expressed as: GTIN International Article Number KNMP article number = ATKODE (2.16.840.1.113883.2.4.4.8) Trade product code (HPK) Prescription code (PRK) Generic product code (GPK) Anatomic Therapeutic Classification code (ATC) SNOMED CT code Substance Name Code (SNK) Substance Name Code, in combination with Route of Administration (SSK) 90.000.000 number (individual code setting) (or similar from the facility) The GTIN enables identification of the product including its origin with a barcode. The ATKODE is the number with which wholesalers link the article to pharmacy systems (e.g. a box with 3 strips of 10 tablets). The HPK is the code for the trade product (with the brand name) as used per dose/per time the medication is taken (1 pill, 1 puff, 1ml) The PRK codes for the same product as the HPK does, but is not linked to a manufacturer (no brand name, no characteristics such as color, geometrical shape etc.). This code will enable a generic prescription, while still defining which trade product can be taken (e.g. a 200ml bag). The generic product code defines the composition of a product, and is sufficient for recording the prescription, but not the order. The prescription code (PRK) was developed and added to the older generic (GPK) and supplier-specific (HPK, ATKODE) coding to enable a generic product to be entered without listing a specific brand on the one hand, and to enable providing enough information to support the pharmacy supplying it on the other. The Substance Name Code (SNK) and the Substance Name Code, in combination with Route of Administration (SSK) are used to prescribe at a more generic level. The GTIN coding is used for the implementation of a barcode scanning standard and to be able to trace the origin of the product. The 90.000.000 number is used in accordance with national agreements. Requirements Allows for translations and alternate encodings within a code system. Also supports communication of the same instance to systems requiring different encodings. Comments It is possible to capture multiple product codes with .coding elements. These product codes need to be related to each other. It should not be possible that two different product codes result in two medication products: only more generic product codes are allowed next to the original product code. Data type Coding Sliced: Unordered, Open, by system(Value) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim: CV orim: fhir:Coding rdfs:subClassOf dt:CDCoding v2: CE.1-8, CE.10-22 rim: union(., ./translation) orim: fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding hcim-pharmaceuticalproduct-v2.0-2017EN: NL-CM:9.7.19927
productCodeZICodelijst	Σ	0..1	CodingBinding	There are no (further) constraints on this element Element id Medication.code.coding:productCodeZICodelijst Short description Code defined by a terminology system Definition A reference to a code defined by a terminology system. Requirements Allows for translations and alternate encodings within a code system. Also supports communication of the same instance to systems requiring different encodings. Comments Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. Data type Coding Binding ProductCodeZICodelijst ProductCodeZICodelijst (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim: CV orim: fhir:Coding rdfs:subClassOf dt:CDCoding v2: CE.1-8, CE.10-22 rim: union(., ./translation) orim: fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
id		0..1	string	There are no (further) constraints on this element Element id Medication.code.coding:productCodeZICodelijst.id Short description xml:id (or equivalent in JSON) Definition unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Medication.code.coding:productCodeZICodelijst.extension Short description Additional Content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
system	Σ	1..1	uriFixed Value	There are no (further) constraints on this element Element id Medication.code.coding:productCodeZICodelijst.system Short description Identity of the terminology system Definition The identification of the code system that defines the meaning of the symbol in the code. Requirements Need to be unambiguous about the source of the definition of the symbol. Comments The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Fixed value urn:oid:2.16.840.1.113883.2.4.4.8 Mappings rim: n/a v2: CE.3 rim:* ./codeSystem orim: fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem
version	Σ	0..1	string	There are no (further) constraints on this element Element id Medication.code.coding:productCodeZICodelijst.version Short description Version of the system - if relevant Definition The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured. and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged. Comments Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.7 rim:* ./codeSystemVersion orim: fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion
code	Σ	0..1	code	There are no (further) constraints on this element Element id Medication.code.coding:productCodeZICodelijst.code Short description Symbol in syntax defined by the system Definition A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination). Requirements Need to refer to a particular code in the system. Comments Note that FHIR strings may not exceed 1MB in size Data type code Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.1 rim:* ./code orim: fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code
display	Σ	0..1	string	There are no (further) constraints on this element Element id Medication.code.coding:productCodeZICodelijst.display Short description Representation defined by the system Definition A representation of the meaning of the code in the system, following the rules of the system. Requirements Need to be able to carry a human-readable meaning of the code for readers that do not know the system. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.2 - but note this is not well followed rim:* CV.displayName orim: fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName
userSelected	Σ	0..1	boolean	There are no (further) constraints on this element Element id Medication.code.coding:productCodeZICodelijst.userSelected Short description If this coding was chosen directly by the user Definition Indicates that this coding was chosen by a user directly - i.e. off a pick list of available items (codes or displays). Requirements This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing. Comments Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely. Data type boolean Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: Sometimes implied by being first rim: CD.codingRationale orim: fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]
productCodeHPKCodelijst	Σ	0..1	CodingBinding	There are no (further) constraints on this element Element id Medication.code.coding:productCodeHPKCodelijst Short description Code defined by a terminology system Definition A reference to a code defined by a terminology system. Requirements Allows for translations and alternate encodings within a code system. Also supports communication of the same instance to systems requiring different encodings. Comments Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. Data type Coding Binding ProductCodeHPKCodelijst ProductCodeHPKCodelijst (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim: CV orim: fhir:Coding rdfs:subClassOf dt:CDCoding v2: CE.1-8, CE.10-22 rim: union(., ./translation) orim: fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
id		0..1	string	There are no (further) constraints on this element Element id Medication.code.coding:productCodeHPKCodelijst.id Short description xml:id (or equivalent in JSON) Definition unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Medication.code.coding:productCodeHPKCodelijst.extension Short description Additional Content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
system	Σ	1..1	uriFixed Value	There are no (further) constraints on this element Element id Medication.code.coding:productCodeHPKCodelijst.system Short description Identity of the terminology system Definition The identification of the code system that defines the meaning of the symbol in the code. Requirements Need to be unambiguous about the source of the definition of the symbol. Comments The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Fixed value urn:oid:2.16.840.1.113883.2.4.4.7 Mappings rim: n/a v2: CE.3 rim:* ./codeSystem orim: fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem
version	Σ	0..1	string	There are no (further) constraints on this element Element id Medication.code.coding:productCodeHPKCodelijst.version Short description Version of the system - if relevant Definition The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured. and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged. Comments Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.7 rim:* ./codeSystemVersion orim: fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion
code	Σ	0..1	code	There are no (further) constraints on this element Element id Medication.code.coding:productCodeHPKCodelijst.code Short description Symbol in syntax defined by the system Definition A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination). Requirements Need to refer to a particular code in the system. Comments Note that FHIR strings may not exceed 1MB in size Data type code Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.1 rim:* ./code orim: fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code
display	Σ	0..1	string	There are no (further) constraints on this element Element id Medication.code.coding:productCodeHPKCodelijst.display Short description Representation defined by the system Definition A representation of the meaning of the code in the system, following the rules of the system. Requirements Need to be able to carry a human-readable meaning of the code for readers that do not know the system. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.2 - but note this is not well followed rim:* CV.displayName orim: fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName
userSelected	Σ	0..1	boolean	There are no (further) constraints on this element Element id Medication.code.coding:productCodeHPKCodelijst.userSelected Short description If this coding was chosen directly by the user Definition Indicates that this coding was chosen by a user directly - i.e. off a pick list of available items (codes or displays). Requirements This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing. Comments Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely. Data type boolean Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: Sometimes implied by being first rim: CD.codingRationale orim: fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]
productCodeGTINCodelijst	Σ	0..1	CodingBinding	There are no (further) constraints on this element Element id Medication.code.coding:productCodeGTINCodelijst Short description Code defined by a terminology system Definition A reference to a code defined by a terminology system. Requirements Allows for translations and alternate encodings within a code system. Also supports communication of the same instance to systems requiring different encodings. Comments Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. Data type Coding Binding ProductCodeGTINCodelijst ProductCodeGTINCodelijst (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim: CV orim: fhir:Coding rdfs:subClassOf dt:CDCoding v2: CE.1-8, CE.10-22 rim: union(., ./translation) orim: fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
id		0..1	string	There are no (further) constraints on this element Element id Medication.code.coding:productCodeGTINCodelijst.id Short description xml:id (or equivalent in JSON) Definition unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Medication.code.coding:productCodeGTINCodelijst.extension Short description Additional Content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
system	Σ	1..1	uriFixed Value	There are no (further) constraints on this element Element id Medication.code.coding:productCodeGTINCodelijst.system Short description Identity of the terminology system Definition The identification of the code system that defines the meaning of the symbol in the code. Requirements Need to be unambiguous about the source of the definition of the symbol. Comments The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Fixed value urn:oid:1.3.160 Mappings rim: n/a v2: CE.3 rim:* ./codeSystem orim: fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem
version	Σ	0..1	string	There are no (further) constraints on this element Element id Medication.code.coding:productCodeGTINCodelijst.version Short description Version of the system - if relevant Definition The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured. and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged. Comments Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.7 rim:* ./codeSystemVersion orim: fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion
code	Σ	0..1	code	There are no (further) constraints on this element Element id Medication.code.coding:productCodeGTINCodelijst.code Short description Symbol in syntax defined by the system Definition A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination). Requirements Need to refer to a particular code in the system. Comments Note that FHIR strings may not exceed 1MB in size Data type code Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.1 rim:* ./code orim: fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code
display	Σ	0..1	string	There are no (further) constraints on this element Element id Medication.code.coding:productCodeGTINCodelijst.display Short description Representation defined by the system Definition A representation of the meaning of the code in the system, following the rules of the system. Requirements Need to be able to carry a human-readable meaning of the code for readers that do not know the system. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.2 - but note this is not well followed rim:* CV.displayName orim: fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName
userSelected	Σ	0..1	boolean	There are no (further) constraints on this element Element id Medication.code.coding:productCodeGTINCodelijst.userSelected Short description If this coding was chosen directly by the user Definition Indicates that this coding was chosen by a user directly - i.e. off a pick list of available items (codes or displays). Requirements This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing. Comments Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely. Data type boolean Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: Sometimes implied by being first rim: CD.codingRationale orim: fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]
productCodeGPKCodelijst	Σ	0..1	CodingBinding	There are no (further) constraints on this element Element id Medication.code.coding:productCodeGPKCodelijst Short description Code defined by a terminology system Definition A reference to a code defined by a terminology system. Requirements Allows for translations and alternate encodings within a code system. Also supports communication of the same instance to systems requiring different encodings. Comments Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. Data type Coding Binding ProductCodeGPKCodelijst ProductCodeGPKCodelijst (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim: CV orim: fhir:Coding rdfs:subClassOf dt:CDCoding v2: CE.1-8, CE.10-22 rim: union(., ./translation) orim: fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
id		0..1	string	There are no (further) constraints on this element Element id Medication.code.coding:productCodeGPKCodelijst.id Short description xml:id (or equivalent in JSON) Definition unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Medication.code.coding:productCodeGPKCodelijst.extension Short description Additional Content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
system	Σ	1..1	uriFixed Value	There are no (further) constraints on this element Element id Medication.code.coding:productCodeGPKCodelijst.system Short description Identity of the terminology system Definition The identification of the code system that defines the meaning of the symbol in the code. Requirements Need to be unambiguous about the source of the definition of the symbol. Comments The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Fixed value urn:oid:2.16.840.1.113883.2.4.4.1 Mappings rim: n/a v2: CE.3 rim:* ./codeSystem orim: fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem
version	Σ	0..1	string	There are no (further) constraints on this element Element id Medication.code.coding:productCodeGPKCodelijst.version Short description Version of the system - if relevant Definition The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured. and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged. Comments Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.7 rim:* ./codeSystemVersion orim: fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion
code	Σ	0..1	code	There are no (further) constraints on this element Element id Medication.code.coding:productCodeGPKCodelijst.code Short description Symbol in syntax defined by the system Definition A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination). Requirements Need to refer to a particular code in the system. Comments Note that FHIR strings may not exceed 1MB in size Data type code Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.1 rim:* ./code orim: fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code
display	Σ	0..1	string	There are no (further) constraints on this element Element id Medication.code.coding:productCodeGPKCodelijst.display Short description Representation defined by the system Definition A representation of the meaning of the code in the system, following the rules of the system. Requirements Need to be able to carry a human-readable meaning of the code for readers that do not know the system. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.2 - but note this is not well followed rim:* CV.displayName orim: fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName
userSelected	Σ	0..1	boolean	There are no (further) constraints on this element Element id Medication.code.coding:productCodeGPKCodelijst.userSelected Short description If this coding was chosen directly by the user Definition Indicates that this coding was chosen by a user directly - i.e. off a pick list of available items (codes or displays). Requirements This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing. Comments Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely. Data type boolean Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: Sometimes implied by being first rim: CD.codingRationale orim: fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]
productCodePRKCodelijst	Σ	0..1	CodingBinding	There are no (further) constraints on this element Element id Medication.code.coding:productCodePRKCodelijst Short description Code defined by a terminology system Definition A reference to a code defined by a terminology system. Requirements Allows for translations and alternate encodings within a code system. Also supports communication of the same instance to systems requiring different encodings. Comments Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. Data type Coding Binding ProductCodePRKCodelijst ProductCodePRKCodelijst (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim: CV orim: fhir:Coding rdfs:subClassOf dt:CDCoding v2: CE.1-8, CE.10-22 rim: union(., ./translation) orim: fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
id		0..1	string	There are no (further) constraints on this element Element id Medication.code.coding:productCodePRKCodelijst.id Short description xml:id (or equivalent in JSON) Definition unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Medication.code.coding:productCodePRKCodelijst.extension Short description Additional Content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
system	Σ	1..1	uriFixed Value	There are no (further) constraints on this element Element id Medication.code.coding:productCodePRKCodelijst.system Short description Identity of the terminology system Definition The identification of the code system that defines the meaning of the symbol in the code. Requirements Need to be unambiguous about the source of the definition of the symbol. Comments The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Fixed value urn:oid:2.16.840.1.113883.2.4.4.10 Mappings rim: n/a v2: CE.3 rim:* ./codeSystem orim: fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem
version	Σ	0..1	string	There are no (further) constraints on this element Element id Medication.code.coding:productCodePRKCodelijst.version Short description Version of the system - if relevant Definition The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured. and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged. Comments Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.7 rim:* ./codeSystemVersion orim: fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion
code	Σ	0..1	code	There are no (further) constraints on this element Element id Medication.code.coding:productCodePRKCodelijst.code Short description Symbol in syntax defined by the system Definition A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination). Requirements Need to refer to a particular code in the system. Comments Note that FHIR strings may not exceed 1MB in size Data type code Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.1 rim:* ./code orim: fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code
display	Σ	0..1	string	There are no (further) constraints on this element Element id Medication.code.coding:productCodePRKCodelijst.display Short description Representation defined by the system Definition A representation of the meaning of the code in the system, following the rules of the system. Requirements Need to be able to carry a human-readable meaning of the code for readers that do not know the system. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.2 - but note this is not well followed rim:* CV.displayName orim: fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName
userSelected	Σ	0..1	boolean	There are no (further) constraints on this element Element id Medication.code.coding:productCodePRKCodelijst.userSelected Short description If this coding was chosen directly by the user Definition Indicates that this coding was chosen by a user directly - i.e. off a pick list of available items (codes or displays). Requirements This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing. Comments Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely. Data type boolean Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: Sometimes implied by being first rim: CD.codingRationale orim: fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]
productCodeATCCodelijst	S Σ	1..1	CodingBinding	There are no (further) constraints on this element Element id Medication.code.coding:productCodeATCCodelijst Short description Code defined by a terminology system Definition A reference to a code defined by a terminology system. Requirements Allows for translations and alternate encodings within a code system. Also supports communication of the same instance to systems requiring different encodings. Comments Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. Data type Coding Binding ProductCodeATCCodelijst ProductCodeATCCodelijst (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim: CV orim: fhir:Coding rdfs:subClassOf dt:CDCoding v2: CE.1-8, CE.10-22 rim: union(., ./translation) orim: fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
id		0..1	string	There are no (further) constraints on this element Element id Medication.code.coding:productCodeATCCodelijst.id Short description xml:id (or equivalent in JSON) Definition unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Medication.code.coding:productCodeATCCodelijst.extension Short description Additional Content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
system	Σ	1..1	uriFixed Value	There are no (further) constraints on this element Element id Medication.code.coding:productCodeATCCodelijst.system Short description Identity of the terminology system Definition The identification of the code system that defines the meaning of the symbol in the code. Requirements Need to be unambiguous about the source of the definition of the symbol. Comments The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Fixed value http://www.whocc.no/atc Mappings rim: n/a v2: CE.3 rim:* ./codeSystem orim: fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem
version	Σ	0..1	string	There are no (further) constraints on this element Element id Medication.code.coding:productCodeATCCodelijst.version Short description Version of the system - if relevant Definition The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured. and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged. Comments Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.7 rim:* ./codeSystemVersion orim: fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion
code	Σ	0..1	code	There are no (further) constraints on this element Element id Medication.code.coding:productCodeATCCodelijst.code Short description Symbol in syntax defined by the system Definition A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination). Requirements Need to refer to a particular code in the system. Comments Note that FHIR strings may not exceed 1MB in size Data type code Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.1 rim:* ./code orim: fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code
display	Σ	0..1	string	There are no (further) constraints on this element Element id Medication.code.coding:productCodeATCCodelijst.display Short description Representation defined by the system Definition A representation of the meaning of the code in the system, following the rules of the system. Requirements Need to be able to carry a human-readable meaning of the code for readers that do not know the system. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.2 - but note this is not well followed rim:* CV.displayName orim: fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName
userSelected	Σ	0..1	boolean	There are no (further) constraints on this element Element id Medication.code.coding:productCodeATCCodelijst.userSelected Short description If this coding was chosen directly by the user Definition Indicates that this coding was chosen by a user directly - i.e. off a pick list of available items (codes or displays). Requirements This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing. Comments Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely. Data type boolean Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: Sometimes implied by being first rim: CD.codingRationale orim: fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]
text	Σ	0..1	string	There are no (further) constraints on this element Element id Medication.code.text Short description Medication Alternate names ProductNaam, Geneesmiddel Definition There is no code for medication entered in free text. In these cases, enter the complete description. Requirements The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source. Comments Very often the text is the same as a displayName of one of the codings. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Examples Example of Medication as free text PARACETAMOL 500MG TABLET Mappings rim: n/a v2: CE.9. But note many systems use CE.2 for this rim: ./originalText[mediaType/code="text/plain"]/data orim: fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText hcim-pharmaceuticalproduct-v2.0-2017EN: NL-CM:9.7.19929
status	Σ	0..1	codeBinding	There are no (further) constraints on this element Element id Medication.status Short description active \| inactive \| entered-in-error Definition A code to indicate if the medication is in active use. Comments This status is not intended to specify if a medication is part of a formulary. Data type code Binding A coded concept defining if the medication is in active use MedicationStatus (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a rim: .statusCode
isBrand	Σ	0..1	boolean	There are no (further) constraints on this element Element id Medication.isBrand Short description True if a brand Definition Set to true if the item is attributable to a specific manufacturer. Data type boolean Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a script10.6: no mapping rim: true if .player.scopingRole[typeCode=MANU] exists w5: class
isOverTheCounter	Σ	0..1	boolean	There are no (further) constraints on this element Element id Medication.isOverTheCounter Short description True if medication does not require a prescription Definition Set to true if the medication can be obtained without an order from a prescriber. Data type boolean Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a rim: NA w5: class
manufacturer	Σ I	0..1	Reference(Organization)	There are no (further) constraints on this element Element id Medication.manufacturer Short description Manufacturer of the item Definition Describes the details of the manufacturer of the medication product. This is not intended to represent the distributor of a medication product. Comments References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository. Data type Reference(Organization) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %resource.contained.id.trace('ids'))` Mappings rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity) script10.6: no mapping v2: RXD-20-Substance Manufacturer Name / RXG-21-Substance Manufacturer Name / RXA-17-Substance Manufacturer Name rim: .player.scopingRole[typeCode=MANU].scoper w5: who.actor
form		0..1	CodeableConceptBinding	There are no (further) constraints on this element Element id Medication.form Short description PharmaceuticalForm Alternate names FarmaceutischeVorm Definition The pharmaceutical form indicates the form of the medication in accordance with the route of administration. Examples include: tablet, suppository, infusion liquid, ointment. If the product has a generic code in the G standard, the form will be known in the G standard. For products without a code (free text, preparation by the pharmacy), the means of administration can be entered. Comments When Medication is referenced from MedicationRequest, this is the ordered form. When Medication is referenced within MedicationDispense, this is the dispensed form. When Medication is referenced within MedicationAdministration, this is administered form. Data type CodeableConcept Binding FarmaceutischeVormCodelijst FarmaceutischeVormCodelijst (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Examples Example of Pharmaceutical form { "coding": [ { "system": "urn:oid:2.16.840.1.113883.2.4.4.11", "code": "230", "display": "TABLET" } ] } Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD script10.6: coding.code = //element(,DrugCodedType)/FormCode coding.system = //element(,DrugCodedType)/FormSourceCode v2: RXO-5-Requested Dosage Form / RXE-6-Give Dosage Form / RXD-6-Actual Dosage Form / RXG-8-Give Dosage Form / RXA-8-Administered Dosage Form rim: .formCode hcim-pharmaceuticalproduct-v2.0-2017EN: NL-CM:9.7.19931
ingredient		0..*	BackboneElement	There are no (further) constraints on this element Element id Medication.ingredient Short description Ingredient Alternate names Ingredient Definition Container of the Ingredient concept. This container contains all data elements of the Ingredient concept. A product contains one or more active substances and excipients. These are usually determined by the product code. For medication prepared or compounded by the local pharmacy, each ingredient must be entered separately. The active substances play an important role, as they: a) determine the pharmacotherapeutic effect of the medication and b) serve as the basis for the indication of the strength of the medication (e.g. 200mg). Comments The ingredients need not be a complete list. If an ingredient is not specified, this does not indicate whether an ingredient is present or absent. If an ingredient is specified it does not mean that all ingredients are specified. It is possible to specify both inactive and active ingredients. If the Medication.code does not fully specify the Medication (i.e. own preparation), all known ingredients by the source system must be conveyed. Data type BackboneElement Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a rim: .scopesRole[typeCode=INGR] hcim-pharmaceuticalproduct-v2.0-2017EN: NL-CM:9.7.19932
id		0..1	string	There are no (further) constraints on this element Element id Medication.ingredient.id Short description xml:id (or equivalent in JSON) Definition unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Medication.ingredient.extension Short description Additional Content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id Medication.ingredient.modifierExtension Short description Extensions that cannot be ignored Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
itemCodeableConcept		1..1	CodeableConcept	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept Short description Substance Alternate names IngredientCode Definition Active substance or excipient. Here, the same codes can be used as for the ProductCode (for dilutions and compounds in particular), but now, the ATC, SSK and SNK codes can also be used to indicate a substance (to list ingredients of local products prepared by the pharmacy). GTIN International Article Number KNMP article number Trade product code (HPK) Prescription code (PRK) Generic product code (GPK) ATC (anatomic therapeutic classification) SSK (substance name code with route of administration) SNK (substance name code) The ATC is an international classification of pharmaceutical substances without a reference to specific products on the market. Therefore, the ATC code of a generic product will not contain a reference to a certain dose, pharmaceutical form or route of administration; it will only contain a reference to the ingredients (not the amount/concentration/strength). Data type CodeableConcept Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Examples Example of Ingredient substance { "coding": [ { "system": "http://www.whocc.no/atc", "code": "B01AC08", "display": "carbasalate calcium" } ] } Mappings rim: n/a script10.6: coding.code = //element(,MedicationType)/DrugCoded/ProductCode coding.system = //element(,MedicationType)/DrugCoded/ProductCodeQualifier coding.display = //element(,MedicationType)/DrugDescription v2:* RXC-2-Component Code if medication: RXO-1-Requested Give Code / RXE-2-Give Code / RXD-2-Dispense/Give Code / RXG-4-Give Code / RXA-5-Administered Code rim: .player hcim-pharmaceuticalproduct-v2.0-2017EN: NL-CM:9.7.19934
id		0..1	string	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.id Short description xml:id (or equivalent in JSON) Definition unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.extension Short description Additional Content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
coding	Σ	0..*	Coding	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding Short description Code defined by a terminology system Definition A reference to a code defined by a terminology system. Requirements Allows for translations and alternate encodings within a code system. Also supports communication of the same instance to systems requiring different encodings. Comments Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. Data type Coding Sliced: Unordered, Open, by system(Value) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim: CV orim: fhir:Coding rdfs:subClassOf dt:CDCoding v2: CE.1-8, CE.10-22 rim: union(., ./translation) orim: fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
ingredientCodeZICodelijst	Σ	0..*	CodingBinding	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeZICodelijst Short description Code defined by a terminology system Definition A reference to a code defined by a terminology system. Requirements Allows for translations and alternate encodings within a code system. Also supports communication of the same instance to systems requiring different encodings. Comments Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. Data type Coding Binding IngredientCodeZICodelijst IngredientCodeZICodelijst (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim: CV orim: fhir:Coding rdfs:subClassOf dt:CDCoding v2: CE.1-8, CE.10-22 rim: union(., ./translation) orim: fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
id		0..1	string	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeZICodelijst.id Short description xml:id (or equivalent in JSON) Definition unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeZICodelijst.extension Short description Additional Content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
system	Σ	1..1	uriFixed Value	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeZICodelijst.system Short description Identity of the terminology system Definition The identification of the code system that defines the meaning of the symbol in the code. Requirements Need to be unambiguous about the source of the definition of the symbol. Comments The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Fixed value urn:oid:2.16.840.1.113883.2.4.4.8 Mappings rim: n/a v2: CE.3 rim:* ./codeSystem orim: fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem
version	Σ	0..1	string	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeZICodelijst.version Short description Version of the system - if relevant Definition The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured. and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged. Comments Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.7 rim:* ./codeSystemVersion orim: fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion
code	Σ	0..1	code	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeZICodelijst.code Short description Symbol in syntax defined by the system Definition A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination). Requirements Need to refer to a particular code in the system. Comments Note that FHIR strings may not exceed 1MB in size Data type code Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.1 rim:* ./code orim: fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code
display	Σ	0..1	string	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeZICodelijst.display Short description Representation defined by the system Definition A representation of the meaning of the code in the system, following the rules of the system. Requirements Need to be able to carry a human-readable meaning of the code for readers that do not know the system. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.2 - but note this is not well followed rim:* CV.displayName orim: fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName
userSelected	Σ	0..1	boolean	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeZICodelijst.userSelected Short description If this coding was chosen directly by the user Definition Indicates that this coding was chosen by a user directly - i.e. off a pick list of available items (codes or displays). Requirements This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing. Comments Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely. Data type boolean Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: Sometimes implied by being first rim: CD.codingRationale orim: fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]
ingredientCodeGTINCodeLijst	Σ	0..*	CodingBinding	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeGTINCodeLijst Short description Code defined by a terminology system Definition A reference to a code defined by a terminology system. Requirements Allows for translations and alternate encodings within a code system. Also supports communication of the same instance to systems requiring different encodings. Comments Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. Data type Coding Binding IngredientCodeGTINCodeLijst IngredientCodeGTINCodeLijst (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim: CV orim: fhir:Coding rdfs:subClassOf dt:CDCoding v2: CE.1-8, CE.10-22 rim: union(., ./translation) orim: fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
id		0..1	string	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeGTINCodeLijst.id Short description xml:id (or equivalent in JSON) Definition unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeGTINCodeLijst.extension Short description Additional Content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
system	Σ	1..1	uriFixed Value	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeGTINCodeLijst.system Short description Identity of the terminology system Definition The identification of the code system that defines the meaning of the symbol in the code. Requirements Need to be unambiguous about the source of the definition of the symbol. Comments The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Fixed value urn:oid:1.3.160 Mappings rim: n/a v2: CE.3 rim:* ./codeSystem orim: fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem
version	Σ	0..1	string	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeGTINCodeLijst.version Short description Version of the system - if relevant Definition The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured. and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged. Comments Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.7 rim:* ./codeSystemVersion orim: fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion
code	Σ	0..1	code	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeGTINCodeLijst.code Short description Symbol in syntax defined by the system Definition A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination). Requirements Need to refer to a particular code in the system. Comments Note that FHIR strings may not exceed 1MB in size Data type code Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.1 rim:* ./code orim: fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code
display	Σ	0..1	string	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeGTINCodeLijst.display Short description Representation defined by the system Definition A representation of the meaning of the code in the system, following the rules of the system. Requirements Need to be able to carry a human-readable meaning of the code for readers that do not know the system. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.2 - but note this is not well followed rim:* CV.displayName orim: fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName
userSelected	Σ	0..1	boolean	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeGTINCodeLijst.userSelected Short description If this coding was chosen directly by the user Definition Indicates that this coding was chosen by a user directly - i.e. off a pick list of available items (codes or displays). Requirements This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing. Comments Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely. Data type boolean Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: Sometimes implied by being first rim: CD.codingRationale orim: fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]
ingredientCodeATCCodelijst	Σ	0..*	CodingBinding	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeATCCodelijst Short description Code defined by a terminology system Definition A reference to a code defined by a terminology system. Requirements Allows for translations and alternate encodings within a code system. Also supports communication of the same instance to systems requiring different encodings. Comments Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. Data type Coding Binding IngredientCodeATCCodelijst IngredientCodeATCCodelijst (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim: CV orim: fhir:Coding rdfs:subClassOf dt:CDCoding v2: CE.1-8, CE.10-22 rim: union(., ./translation) orim: fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
id		0..1	string	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeATCCodelijst.id Short description xml:id (or equivalent in JSON) Definition unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeATCCodelijst.extension Short description Additional Content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
system	Σ	1..1	uriFixed Value	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeATCCodelijst.system Short description Identity of the terminology system Definition The identification of the code system that defines the meaning of the symbol in the code. Requirements Need to be unambiguous about the source of the definition of the symbol. Comments The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Fixed value http://www.whocc.no/atc Mappings rim: n/a v2: CE.3 rim:* ./codeSystem orim: fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem
version	Σ	0..1	string	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeATCCodelijst.version Short description Version of the system - if relevant Definition The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured. and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged. Comments Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.7 rim:* ./codeSystemVersion orim: fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion
code	Σ	0..1	code	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeATCCodelijst.code Short description Symbol in syntax defined by the system Definition A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination). Requirements Need to refer to a particular code in the system. Comments Note that FHIR strings may not exceed 1MB in size Data type code Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.1 rim:* ./code orim: fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code
display	Σ	0..1	string	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeATCCodelijst.display Short description Representation defined by the system Definition A representation of the meaning of the code in the system, following the rules of the system. Requirements Need to be able to carry a human-readable meaning of the code for readers that do not know the system. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.2 - but note this is not well followed rim:* CV.displayName orim: fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName
userSelected	Σ	0..1	boolean	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeATCCodelijst.userSelected Short description If this coding was chosen directly by the user Definition Indicates that this coding was chosen by a user directly - i.e. off a pick list of available items (codes or displays). Requirements This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing. Comments Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely. Data type boolean Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: Sometimes implied by being first rim: CD.codingRationale orim: fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]
ingredientCodeHPKLijst	Σ	0..*	CodingBinding	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeHPKLijst Short description Code defined by a terminology system Definition A reference to a code defined by a terminology system. Requirements Allows for translations and alternate encodings within a code system. Also supports communication of the same instance to systems requiring different encodings. Comments Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. Data type Coding Binding IngredientCodeHPKLijst IngredientCodeHPKLijst (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim: CV orim: fhir:Coding rdfs:subClassOf dt:CDCoding v2: CE.1-8, CE.10-22 rim: union(., ./translation) orim: fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
id		0..1	string	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeHPKLijst.id Short description xml:id (or equivalent in JSON) Definition unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeHPKLijst.extension Short description Additional Content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
system	Σ	1..1	uriFixed Value	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeHPKLijst.system Short description Identity of the terminology system Definition The identification of the code system that defines the meaning of the symbol in the code. Requirements Need to be unambiguous about the source of the definition of the symbol. Comments The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Fixed value urn:oid:2.16.840.1.113883.2.4.4.7 Mappings rim: n/a v2: CE.3 rim:* ./codeSystem orim: fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem
version	Σ	0..1	string	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeHPKLijst.version Short description Version of the system - if relevant Definition The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured. and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged. Comments Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.7 rim:* ./codeSystemVersion orim: fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion
code	Σ	0..1	code	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeHPKLijst.code Short description Symbol in syntax defined by the system Definition A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination). Requirements Need to refer to a particular code in the system. Comments Note that FHIR strings may not exceed 1MB in size Data type code Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.1 rim:* ./code orim: fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code
display	Σ	0..1	string	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeHPKLijst.display Short description Representation defined by the system Definition A representation of the meaning of the code in the system, following the rules of the system. Requirements Need to be able to carry a human-readable meaning of the code for readers that do not know the system. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.2 - but note this is not well followed rim:* CV.displayName orim: fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName
userSelected	Σ	0..1	boolean	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeHPKLijst.userSelected Short description If this coding was chosen directly by the user Definition Indicates that this coding was chosen by a user directly - i.e. off a pick list of available items (codes or displays). Requirements This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing. Comments Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely. Data type boolean Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: Sometimes implied by being first rim: CD.codingRationale orim: fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]
ingredientCodeGPKLijst	Σ	0..*	CodingBinding	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeGPKLijst Short description Code defined by a terminology system Definition A reference to a code defined by a terminology system. Requirements Allows for translations and alternate encodings within a code system. Also supports communication of the same instance to systems requiring different encodings. Comments Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. Data type Coding Binding IngredientCodeGPKLijst IngredientCodeGPKLijst (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim: CV orim: fhir:Coding rdfs:subClassOf dt:CDCoding v2: CE.1-8, CE.10-22 rim: union(., ./translation) orim: fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
id		0..1	string	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeGPKLijst.id Short description xml:id (or equivalent in JSON) Definition unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeGPKLijst.extension Short description Additional Content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
system	Σ	1..1	uriFixed Value	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeGPKLijst.system Short description Identity of the terminology system Definition The identification of the code system that defines the meaning of the symbol in the code. Requirements Need to be unambiguous about the source of the definition of the symbol. Comments The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Fixed value urn:oid:2.16.840.1.113883.2.4.4.1 Mappings rim: n/a v2: CE.3 rim:* ./codeSystem orim: fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem
version	Σ	0..1	string	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeGPKLijst.version Short description Version of the system - if relevant Definition The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured. and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged. Comments Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.7 rim:* ./codeSystemVersion orim: fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion
code	Σ	0..1	code	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeGPKLijst.code Short description Symbol in syntax defined by the system Definition A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination). Requirements Need to refer to a particular code in the system. Comments Note that FHIR strings may not exceed 1MB in size Data type code Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.1 rim:* ./code orim: fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code
display	Σ	0..1	string	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeGPKLijst.display Short description Representation defined by the system Definition A representation of the meaning of the code in the system, following the rules of the system. Requirements Need to be able to carry a human-readable meaning of the code for readers that do not know the system. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.2 - but note this is not well followed rim:* CV.displayName orim: fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName
userSelected	Σ	0..1	boolean	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeGPKLijst.userSelected Short description If this coding was chosen directly by the user Definition Indicates that this coding was chosen by a user directly - i.e. off a pick list of available items (codes or displays). Requirements This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing. Comments Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely. Data type boolean Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: Sometimes implied by being first rim: CD.codingRationale orim: fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]
ingredientCodeSNKLijst	Σ	0..*	CodingBinding	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeSNKLijst Short description Code defined by a terminology system Definition A reference to a code defined by a terminology system. Requirements Allows for translations and alternate encodings within a code system. Also supports communication of the same instance to systems requiring different encodings. Comments Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. Data type Coding Binding IngredientCodeSNKLijst IngredientCodeSNKLijst (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim: CV orim: fhir:Coding rdfs:subClassOf dt:CDCoding v2: CE.1-8, CE.10-22 rim: union(., ./translation) orim: fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
id		0..1	string	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeSNKLijst.id Short description xml:id (or equivalent in JSON) Definition unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeSNKLijst.extension Short description Additional Content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
system	Σ	1..1	uriFixed Value	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeSNKLijst.system Short description Identity of the terminology system Definition The identification of the code system that defines the meaning of the symbol in the code. Requirements Need to be unambiguous about the source of the definition of the symbol. Comments The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Fixed value urn:oid:2.16.840.1.113883.2.4.4.1.750 Mappings rim: n/a v2: CE.3 rim:* ./codeSystem orim: fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem
version	Σ	0..1	string	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeSNKLijst.version Short description Version of the system - if relevant Definition The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured. and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged. Comments Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.7 rim:* ./codeSystemVersion orim: fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion
code	Σ	0..1	code	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeSNKLijst.code Short description Symbol in syntax defined by the system Definition A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination). Requirements Need to refer to a particular code in the system. Comments Note that FHIR strings may not exceed 1MB in size Data type code Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.1 rim:* ./code orim: fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code
display	Σ	0..1	string	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeSNKLijst.display Short description Representation defined by the system Definition A representation of the meaning of the code in the system, following the rules of the system. Requirements Need to be able to carry a human-readable meaning of the code for readers that do not know the system. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.2 - but note this is not well followed rim:* CV.displayName orim: fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName
userSelected	Σ	0..1	boolean	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeSNKLijst.userSelected Short description If this coding was chosen directly by the user Definition Indicates that this coding was chosen by a user directly - i.e. off a pick list of available items (codes or displays). Requirements This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing. Comments Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely. Data type boolean Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: Sometimes implied by being first rim: CD.codingRationale orim: fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]
ingredientCodePRKLijst	Σ	0..*	CodingBinding	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodePRKLijst Short description Code defined by a terminology system Definition A reference to a code defined by a terminology system. Requirements Allows for translations and alternate encodings within a code system. Also supports communication of the same instance to systems requiring different encodings. Comments Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. Data type Coding Binding IngredientCodePRKLijst IngredientCodePRKLijst (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim: CV orim: fhir:Coding rdfs:subClassOf dt:CDCoding v2: CE.1-8, CE.10-22 rim: union(., ./translation) orim: fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
id		0..1	string	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodePRKLijst.id Short description xml:id (or equivalent in JSON) Definition unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodePRKLijst.extension Short description Additional Content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
system	Σ	1..1	uriFixed Value	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodePRKLijst.system Short description Identity of the terminology system Definition The identification of the code system that defines the meaning of the symbol in the code. Requirements Need to be unambiguous about the source of the definition of the symbol. Comments The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Fixed value urn:oid:2.16.840.1.113883.2.4.4.10 Mappings rim: n/a v2: CE.3 rim:* ./codeSystem orim: fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem
version	Σ	0..1	string	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodePRKLijst.version Short description Version of the system - if relevant Definition The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured. and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged. Comments Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.7 rim:* ./codeSystemVersion orim: fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion
code	Σ	0..1	code	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodePRKLijst.code Short description Symbol in syntax defined by the system Definition A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination). Requirements Need to refer to a particular code in the system. Comments Note that FHIR strings may not exceed 1MB in size Data type code Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.1 rim:* ./code orim: fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code
display	Σ	0..1	string	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodePRKLijst.display Short description Representation defined by the system Definition A representation of the meaning of the code in the system, following the rules of the system. Requirements Need to be able to carry a human-readable meaning of the code for readers that do not know the system. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.2 - but note this is not well followed rim:* CV.displayName orim: fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName
userSelected	Σ	0..1	boolean	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodePRKLijst.userSelected Short description If this coding was chosen directly by the user Definition Indicates that this coding was chosen by a user directly - i.e. off a pick list of available items (codes or displays). Requirements This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing. Comments Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely. Data type boolean Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: Sometimes implied by being first rim: CD.codingRationale orim: fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]
ingredientCodeSSKLijst	Σ	0..*	CodingBinding	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeSSKLijst Short description Code defined by a terminology system Definition A reference to a code defined by a terminology system. Requirements Allows for translations and alternate encodings within a code system. Also supports communication of the same instance to systems requiring different encodings. Comments Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. Data type Coding Binding IngredientCodeSSKLijst IngredientCodeSSKLijst (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim: CV orim: fhir:Coding rdfs:subClassOf dt:CDCoding v2: CE.1-8, CE.10-22 rim: union(., ./translation) orim: fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
id		0..1	string	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeSSKLijst.id Short description xml:id (or equivalent in JSON) Definition unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeSSKLijst.extension Short description Additional Content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
system	Σ	1..1	uriFixed Value	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeSSKLijst.system Short description Identity of the terminology system Definition The identification of the code system that defines the meaning of the symbol in the code. Requirements Need to be unambiguous about the source of the definition of the symbol. Comments The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Fixed value urn:oid:2.16.840.1.113883.2.4.4.1.725 Mappings rim: n/a v2: CE.3 rim:* ./codeSystem orim: fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem
version	Σ	0..1	string	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeSSKLijst.version Short description Version of the system - if relevant Definition The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured. and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged. Comments Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.7 rim:* ./codeSystemVersion orim: fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion
code	Σ	0..1	code	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeSSKLijst.code Short description Symbol in syntax defined by the system Definition A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination). Requirements Need to refer to a particular code in the system. Comments Note that FHIR strings may not exceed 1MB in size Data type code Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.1 rim:* ./code orim: fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code
display	Σ	0..1	string	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeSSKLijst.display Short description Representation defined by the system Definition A representation of the meaning of the code in the system, following the rules of the system. Requirements Need to be able to carry a human-readable meaning of the code for readers that do not know the system. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.2 - but note this is not well followed rim:* CV.displayName orim: fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName
userSelected	Σ	0..1	boolean	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeSSKLijst.userSelected Short description If this coding was chosen directly by the user Definition Indicates that this coding was chosen by a user directly - i.e. off a pick list of available items (codes or displays). Requirements This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing. Comments Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely. Data type boolean Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: Sometimes implied by being first rim: CD.codingRationale orim: fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]
text	Σ	0..1	string	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.text Short description Plain text representation of the concept Definition A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user. Requirements The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source. Comments Very often the text is the same as a displayName of one of the codings. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.9. But note many systems use CE.2 for this rim: ./originalText[mediaType/code="text/plain"]/data orim: fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText
isActive		0..1	boolean	There are no (further) constraints on this element Element id Medication.ingredient.isActive Short description Active ingredient indicator Definition Indication of whether this ingredient affects the therapeutic action of the drug. Requirements True indicates that the ingredient affects the therapeutic action of the drug (i.e. active). False indicates that the ingredient does not affect the therapeutic action of the drug (i.e. inactive). Data type boolean Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a rim: NA
amount	I	0..1	Ratio	There are no (further) constraints on this element Element id Medication.ingredient.amount Short description Concentration Alternate names Sterkte, Concentratie, Hoeveelheid Definition The relative amount of this ingredient in this product. Calculation of Concentration = Ingredient Amount ÷ Product Amount. This could be a concentration if the medication is dissolved in liquid, for example: 25mg/tablet or 50IE/ml of 200mg/500ml. Data type Ratio Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` rat-1: Numerator and denominator SHALL both be present, or both are absent. If both are absent, there SHALL be some extension present `(numerator.empty() xor denominator.exists()) and (numerator.exists() or extension.exists())` Examples Example of Concentration { "numerator": { "value": 5, "unit": "ml", "system": "http://unitsofmeasure.org", "code": "mL" }, "denominator": { "value": 200, "unit": "ml", "system": "http://unitsofmeasure.org", "code": "mL" } } Mappings rim: n/a v2: N/A rim: RTO script10.6: //element(,DrugCodedType)/Strength v2:* RXC-3-Component Amount & RXC-4-Component Units if medication: RXO-2-Requested Give Amount - Minimum & RXO-4-Requested Give Units / RXO-3-Requested Give Amount - Maximum & RXO-4-Requested Give Units / RXO-11-Requested Dispense Amount & RXO-12-Requested Dispense Units / RXE-3-Give Amount - Minimum & RXE-5-Give Units / RXE-4-Give Amount - Maximum & RXE-5-Give Units / RXE-10-Dispense Amount & RXE-10-Dispense Units rim: .quantity hcim-pharmaceuticalproduct-v2.0-2017EN: NL-CM:9.7.19933
id		0..1	string	There are no (further) constraints on this element Element id Medication.ingredient.amount.id Short description xml:id (or equivalent in JSON) Definition unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Medication.ingredient.amount.extension Short description Additional Content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
numerator	Σ I	0..1	Quantity	There are no (further) constraints on this element Element id Medication.ingredient.amount.numerator Short description IngredientAmount Alternate names IngredientHoeveelheid Definition The amount of this ingredient. This is the numerator for the calculation of the concentration. The unit should be selected from the G-Standard (Table 902) Comments The context of use may frequently define what kind of quantity this is and therefore what kind of units can be used. The context of use may also restrict the values for the comparator. Data type Quantity Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` qty-3: If a code for the unit is present, the system SHALL also be present `code.empty() or system.exists()` Mappings rim: n/a v2: SN (see also Range) or CQ rim: PQ, IVL<PQ>, MO, CO, depending on the values rim: .numerator hcim-pharmaceuticalproduct-v2.0-2017EN: NL-CM:9.7.22277
denominator	Σ I	0..1	Quantity	There are no (further) constraints on this element Element id Medication.ingredient.amount.denominator Short description ProductAmount Alternate names ProductHoeveelheid Definition Amount of the product. This is the denominator for the calculation of the concentration Comments The context of use may frequently define what kind of quantity this is and therefore what kind of units can be used. The context of use may also restrict the values for the comparator. Data type Quantity Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` qty-3: If a code for the unit is present, the system SHALL also be present `code.empty() or system.exists()` Mappings rim: n/a v2: SN (see also Range) or CQ rim: PQ, IVL<PQ>, MO, CO, depending on the values rim: .denominator hcim-pharmaceuticalproduct-v2.0-2017EN: NL-CM:9.7.22278
package		0..1	BackboneElement	There are no (further) constraints on this element Element id Medication.package Short description Details about packaged medications Definition Information that only applies to packages (not products). Data type BackboneElement Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a script10.6: no mapping rim: .player[classCode=CONT]
id		0..1	string	There are no (further) constraints on this element Element id Medication.package.id Short description xml:id (or equivalent in JSON) Definition unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Medication.package.extension Short description Additional Content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id Medication.package.modifierExtension Short description Extensions that cannot be ignored Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
container		0..1	CodeableConcept	There are no (further) constraints on this element Element id Medication.package.container Short description E.g. box, vial, blister-pack Definition The kind of container that this package comes as. Comments Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination. Data type CodeableConcept Binding A coded concept defining the kind of container a medication package is packaged in MedicationContainer (example) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD script10.6: no mapping rim: .code
content		0..*	BackboneElement	There are no (further) constraints on this element Element id Medication.package.content Short description What is in the package Definition A set of components that go to make up the described item. Data type BackboneElement Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a script10.6: no mapping rim: .scopesRole[typeCode=CONT]
id		0..1	string	There are no (further) constraints on this element Element id Medication.package.content.id Short description xml:id (or equivalent in JSON) Definition unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Medication.package.content.extension Short description Additional Content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id Medication.package.content.modifierExtension Short description Extensions that cannot be ignored Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
item[x]		1..1		There are no (further) constraints on this element Element id Medication.package.content.item[x] Short description The item in the package Definition Identifies one of the items in the package. Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a script10.6: no mapping rim: .player
itemCodeableConcept			CodeableConcept	There are no (further) constraints on this element Data type CodeableConcept
itemReference			Reference(HCIM PharmaceuticalProduct)	There are no (further) constraints on this element Data type Reference(HCIM PharmaceuticalProduct)
amount	I	0..1	SimpleQuantity	There are no (further) constraints on this element Element id Medication.package.content.amount Short description Quantity present in the package Definition The amount of the product that is in the package. Comments The context of use may frequently define what kind of quantity this is and therefore what kind of units can be used. The context of use may also restrict the values for the comparator. Data type SimpleQuantity Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` qty-3: If a code for the unit is present, the system SHALL also be present `code.empty() or system.exists()` sqty-1: The comparator is not used on a SimpleQuantity `comparator.empty()` Mappings rim: n/a v2: SN (see also Range) or CQ rim: PQ, IVL<PQ>, MO, CO, depending on the values script10.6: no mapping rim: .quantity
batch		0..*	BackboneElement	There are no (further) constraints on this element Element id Medication.package.batch Short description Identifies a single production run Definition Information about a group of medication produced or packaged from one production run. Data type BackboneElement Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a script10.6: no mapping rim: participation[typeCode=CSM].role[classCode=INST].scopedRole.scoper[classCode=MMAT].id
id		0..1	string	There are no (further) constraints on this element Element id Medication.package.batch.id Short description xml:id (or equivalent in JSON) Definition unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Medication.package.batch.extension Short description Additional Content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id Medication.package.batch.modifierExtension Short description Extensions that cannot be ignored Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
lotNumber		0..1	string	There are no (further) constraints on this element Element id Medication.package.batch.lotNumber Short description Identifier assigned to batch Definition The assigned lot number of a batch of the specified product. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a script10.6: no mapping v2: RXA-15 Substance Lot Number / RXG-19 Substance Lot Number rim: .id
expirationDate		0..1	dateTime	There are no (further) constraints on this element Element id Medication.package.batch.expirationDate Short description When batch will expire Definition When this specific batch of product will expire. Data type dateTime Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a script10.6: no mapping v2: RXA-16 Substance Expiration Date / RXG-20 Substance Expiration Date rim: participation[typeCode=CSM].role[classCode=INST].scopedRole.scoper[classCode=MMAT].expirationTime
image	I	0..*	Attachment	There are no (further) constraints on this element Element id Medication.image Short description Picture of the medication Definition Photo(s) or graphic representation(s) of the medication. Requirements Note that "image" is only applicable when the medication.code represents a physical item (e.g. Amoxil 250 mg capsule) and not an abstract item (e.g. amoxicillin 250 mg). Comments When providing a summary view (for example with Observation.value[x]) Attachment should be represented with a brief display text such as "Attachment". Data type Attachment Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` att-1: It the Attachment has data, it SHALL have a contentType `data.empty() or contentType.exists()` Mappings rim: n/a v2: ED/RP rim: ED rim: .participation[typeCode=SUBJ].role[classCode=MANU],source[classCode=OBS,moodCode=EVN,code="type of image"].value(ED.image)

Medication	I		Medication	There are no (further) constraints on this element Element id Medication Short description Product Alternate names Geneesmiddel Definition Root concept of the Product partial information model. This root concept contains all data elements of the Product partial information model. The prescribed product is usually a medicine. However, medical aids and bandages can also be prescribed and supplied via the pharmacy. Strictly speaking, food and blood products do not belong in the medication category, but can be prescribed and supplied by a pharmacy as well. A type of medication can be indicated with a single codeThat code can be chosen from several possible coding systems (concretely: GPK, PRK, HPK or article numbers). Correct use of these codes in the software systems will sufficiently record the composition of the product used, making a complete product specification unnecessary. In addition to a primary code, alternative codes from other coding systems can also be entered (so that the GPK can be sent along in the event that the patient was registered based on PRK, for example). Entering multiple ingredients will enable you to display a compound product. If one of the composite parts is liquid, the dosage will be given in milliliters; otherwise it will be given in ‘units’. In that case, the composition of the medicationcan be specified implicitly (with the use of a medication code) or explicitly, for example by listing the (active) substance(s) of the medication. Prescriptions to be prepared by the pharmacy can be entered as well. This can be done by means of the option listed above to enter coded ingredients and/or by entering the composition and preparation method as free text. Data type Medication Constraints dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources `contained.contained.empty()` dom-1: If the resource is contained in another resource, it SHALL NOT contain any narrative `contained.text.empty()` dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated `contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()` dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource `contained.where(('#'+id in %resource.descendants().reference).not()).empty()` Mappings rim: Entity. Role, or Act script10.6: NewRx/MedicationPrescribed -or- RxFill/MedicationDispensed -or- RxHistoryResponse/MedicationDispensed -or- RxHistoryResponse/MedicationPrescribed rim: ManufacturedProduct[classCode=ADMM] w5: clinical.medication hcim-pharmaceuticalproduct-v2.0-2017EN: NL-CM:9.7.19926
id	Σ	0..1	id	There are no (further) constraints on this element Element id Medication.id Short description Logical id of this artifact Definition The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes. Comments The only time that a resource does not have an id is when it is being submitted to the server using a create operation. Data type id Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a
meta	Σ	0..1	Meta	There are no (further) constraints on this element Element id Medication.meta Short description Metadata about the resource Definition The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content may not always be associated with version changes to the resource. Data type Meta Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a rim: N/A
implicitRules	Σ ?!	0..1	uri	There are no (further) constraints on this element Element id Medication.implicitRules Short description A set of rules under which this content was created Definition A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Comments Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. This element is labelled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a
language		0..1	codeBinding	There are no (further) constraints on this element Element id Medication.language Short description Language of the resource content Definition The base language in which the resource is written. Comments Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute). Data type code Binding A human language. Common Languages (extensible) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a
text	I	0..1	Narrative	There are no (further) constraints on this element Element id Medication.text Short description Text summary of the resource, for human interpretation Alternate names narrative, html, xhtml, display Definition A human-readable narrative that contains a summary of the resource, and may be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety. Comments Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded in formation is added later. Data type Narrative Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a rim: N/A rim: Act.text?
contained		0..*	Resource	There are no (further) constraints on this element Element id Medication.contained Short description Contained, inline Resources Alternate names inline resources, anonymous resources, contained resources Definition These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope. Comments This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Data type Resource Mappings rim: Entity. Role, or Act rim: N/A
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Medication.extension Short description Additional Content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the resource. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
description	I	0..1	Extension(string)	There are no (further) constraints on this element Element id Medication.extension:description Short description Description Alternate names extensions, user content, Omschrijving Definition A textual description of the type of medication (including relevant properties of the composition and preparation method if possible), which is only used if no coded indication from the G Standard is available (magistral preparation). Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension(string) Extension URL http://nictiz.nl/fhir/StructureDefinition/zib-Product-Description Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A hcim-pharmaceuticalproduct-v2.0-2017EN: NL-CM:9.7.19784
modifierExtension	?! I	0..*	Extension	There are no (further) constraints on this element Element id Medication.modifierExtension Short description Extensions that cannot be ignored Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the resource, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
code	Σ	0..1	CodeableConcept	Element id Medication.code Short description Codes that identify this medication Definition A code (or set of codes) that specify this medication, or a textual description if no code is available. Usage note: This could be a standard medication code such as a code from RxNorm, SNOMED CT, IDMP etc. It could also be a national or local formulary code, optionally with translations to other code systems. Only a few medication related codes are relevant for NICE, only codes pertaining to the ATC groups listed below will be processed [NICE dataelement : ATC-codes or ATC-(sub)group codes]: Chronic Obstructive Pulmonary Disease: R03 subgroup (Drugs for obstructive airway diseases) Diabetes: A10 subgroup (Dugs used in diabetes) Immunological insufficiency: L04 subgroup (Immunosuppressants) or H02 subgroup (Corticosteroid for systemic use) or L01 subgroup (Antineoplastic agents) Thrombolytic therapy following acute myocardial infarction: B01 subgroup (Antithrombotic agents) Vasoactive medication: C01CA/CE subgroup (adrenergic and dopaminergic agents) or H01BA subgroup (Vasopressin and analogues) Dobutamine administration: C01CA07 Highest adrenaline speed: B02BC09 Highest dopamine speed: C01CA04 Highest noradrenaline speed: C01CA24 Administration of phospodiesterase inhibitors: C01CE (Phospodiesterase inhibitors) Continuous intravenous administration of antiarrythmics: C01B (Antiarrhythmics) Administration of arterial medication: All (non-specified) Nutrition - parenteral: B05BA (Solutions for parenteral nutrition) Anticoagulation: B01 (Antithrombotic agents) Antibiotics (IV): J01 (Antibacterials) Comments Depending on the context of use, the code that was actually selected by the user (prescriber, dispenser, etc.) will have the coding.userSelected set to true. As described in the coding datatype: "A coding may be marked as a "userSelected" if a user selected the particular coded value in a user interface (e.g. the user selects an item in a pick-list). If a user selected coding exists, it is the preferred choice for performing translations etc. Data type CodeableConcept Binding A coded concept that defines the type of a medication SNOMED CT Medication Codes (example) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Examples Example of Medication code { "coding": [ { "system": "urn:oid:2.16.840.1.113883.2.4.4.8", "code": "13610554", "display": "Carbasalaatcalcium Sandoz 600 30 sac" } ] } Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD script10.6: coding.code = //element(,MedicationType)/DrugCoded/ProductCode coding.system = //element(,MedicationType)/DrugCoded/ProductCodeQualifier coding.display = //element(,MedicationType)/DrugDescription v2:* RXO-1.1-Requested Give Code.code / RXE-2.1-Give Code.code / RXD-2.1-Dispense/Give Code.code / RXG-4.1-Give Code.code /RXA-5.1-Administered Code.code / RXC-2.1 Component Code rim: .code w5: class NICE-Datadictionary-MDS: https://www.stichting-nice.nl/dd/#57 NICE-Datadictionary-MDS: https://www.stichting-nice.nl/dd/#78 NICE-Datadictionary-MDS: https://www.stichting-nice.nl/dd/#159 NICE-Datadictionary-MDS: https://www.stichting-nice.nl/dd/#411 NICE-Datadictionary-MDS: https://www.stichting-nice.nl/dd/#432 NICE-Datadictionary-SOFA: https://www.stichting-nice.nl/dd/#18 NICE-Datadictionary-SOFA: https://www.stichting-nice.nl/dd/#93 NICE-Datadictionary-SOFA: https://www.stichting-nice.nl/dd/#94 NICE-Datadictionary-SOFA: https://www.stichting-nice.nl/dd/#224 NICE-Datadictionary-SOFA: https://www.stichting-nice.nl/dd/#238 NICE-Datadictionary-Sepsis: https://www.stichting-nice.nl/dd/#740 NICE-Datadictionary-Sepsis: https://www.stichting-nice.nl/dd/#742 NICE-Datadictionary-Sepsis: https://www.stichting-nice.nl/dd/#743 NICE-Datadictionary-Sepsis: https://www.stichting-nice.nl/dd/#744 NICE-Datadictionary-Sepsis: https://www.stichting-nice.nl/dd/#745 NICE-Datadictionary-Capacity: https://www.stichting-nice.nl/dd/#572 NICE-Datadictionary-Capacity: https://www.stichting-nice.nl/dd/#576 NICE-Datadictionary-Capacity: https://www.stichting-nice.nl/dd/#599 NICE-Datadictionary-Capacity: https://www.stichting-nice.nl/dd/#611 NICE-Datadictionary-Capacity: https://www.stichting-nice.nl/dd/#625
id		0..1	string	There are no (further) constraints on this element Element id Medication.code.id Short description xml:id (or equivalent in JSON) Definition unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Medication.code.extension Short description Additional Content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
coding	Σ	0..*	Coding	There are no (further) constraints on this element Element id Medication.code.coding Short description MedicationCode Alternate names ProductCode, Geneesmiddel code Definition Coding medication in the Netherlands is done on the basis of the G standard (issued by Z-index), which is filled under the direction of KNMP. The coded medication can be expressed as: GTIN International Article Number KNMP article number = ATKODE (2.16.840.1.113883.2.4.4.8) Trade product code (HPK) Prescription code (PRK) Generic product code (GPK) Anatomic Therapeutic Classification code (ATC) SNOMED CT code Substance Name Code (SNK) Substance Name Code, in combination with Route of Administration (SSK) 90.000.000 number (individual code setting) (or similar from the facility) The GTIN enables identification of the product including its origin with a barcode. The ATKODE is the number with which wholesalers link the article to pharmacy systems (e.g. a box with 3 strips of 10 tablets). The HPK is the code for the trade product (with the brand name) as used per dose/per time the medication is taken (1 pill, 1 puff, 1ml) The PRK codes for the same product as the HPK does, but is not linked to a manufacturer (no brand name, no characteristics such as color, geometrical shape etc.). This code will enable a generic prescription, while still defining which trade product can be taken (e.g. a 200ml bag). The generic product code defines the composition of a product, and is sufficient for recording the prescription, but not the order. The prescription code (PRK) was developed and added to the older generic (GPK) and supplier-specific (HPK, ATKODE) coding to enable a generic product to be entered without listing a specific brand on the one hand, and to enable providing enough information to support the pharmacy supplying it on the other. The Substance Name Code (SNK) and the Substance Name Code, in combination with Route of Administration (SSK) are used to prescribe at a more generic level. The GTIN coding is used for the implementation of a barcode scanning standard and to be able to trace the origin of the product. The 90.000.000 number is used in accordance with national agreements. Requirements Allows for translations and alternate encodings within a code system. Also supports communication of the same instance to systems requiring different encodings. Comments It is possible to capture multiple product codes with .coding elements. These product codes need to be related to each other. It should not be possible that two different product codes result in two medication products: only more generic product codes are allowed next to the original product code. Data type Coding Sliced: Unordered, Open, by system(Value) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim: CV orim: fhir:Coding rdfs:subClassOf dt:CDCoding v2: CE.1-8, CE.10-22 rim: union(., ./translation) orim: fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding hcim-pharmaceuticalproduct-v2.0-2017EN: NL-CM:9.7.19927
productCodeZICodelijst	Σ	0..1	CodingBinding	There are no (further) constraints on this element Element id Medication.code.coding:productCodeZICodelijst Short description Code defined by a terminology system Definition A reference to a code defined by a terminology system. Requirements Allows for translations and alternate encodings within a code system. Also supports communication of the same instance to systems requiring different encodings. Comments Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. Data type Coding Binding ProductCodeZICodelijst ProductCodeZICodelijst (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim: CV orim: fhir:Coding rdfs:subClassOf dt:CDCoding v2: CE.1-8, CE.10-22 rim: union(., ./translation) orim: fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
id		0..1	string	There are no (further) constraints on this element Element id Medication.code.coding:productCodeZICodelijst.id Short description xml:id (or equivalent in JSON) Definition unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Medication.code.coding:productCodeZICodelijst.extension Short description Additional Content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
system	Σ	1..1	uriFixed Value	There are no (further) constraints on this element Element id Medication.code.coding:productCodeZICodelijst.system Short description Identity of the terminology system Definition The identification of the code system that defines the meaning of the symbol in the code. Requirements Need to be unambiguous about the source of the definition of the symbol. Comments The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Fixed value urn:oid:2.16.840.1.113883.2.4.4.8 Mappings rim: n/a v2: CE.3 rim:* ./codeSystem orim: fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem
version	Σ	0..1	string	There are no (further) constraints on this element Element id Medication.code.coding:productCodeZICodelijst.version Short description Version of the system - if relevant Definition The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured. and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged. Comments Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.7 rim:* ./codeSystemVersion orim: fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion
code	Σ	0..1	code	There are no (further) constraints on this element Element id Medication.code.coding:productCodeZICodelijst.code Short description Symbol in syntax defined by the system Definition A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination). Requirements Need to refer to a particular code in the system. Comments Note that FHIR strings may not exceed 1MB in size Data type code Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.1 rim:* ./code orim: fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code
display	Σ	0..1	string	There are no (further) constraints on this element Element id Medication.code.coding:productCodeZICodelijst.display Short description Representation defined by the system Definition A representation of the meaning of the code in the system, following the rules of the system. Requirements Need to be able to carry a human-readable meaning of the code for readers that do not know the system. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.2 - but note this is not well followed rim:* CV.displayName orim: fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName
userSelected	Σ	0..1	boolean	There are no (further) constraints on this element Element id Medication.code.coding:productCodeZICodelijst.userSelected Short description If this coding was chosen directly by the user Definition Indicates that this coding was chosen by a user directly - i.e. off a pick list of available items (codes or displays). Requirements This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing. Comments Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely. Data type boolean Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: Sometimes implied by being first rim: CD.codingRationale orim: fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]
productCodeHPKCodelijst	Σ	0..1	CodingBinding	There are no (further) constraints on this element Element id Medication.code.coding:productCodeHPKCodelijst Short description Code defined by a terminology system Definition A reference to a code defined by a terminology system. Requirements Allows for translations and alternate encodings within a code system. Also supports communication of the same instance to systems requiring different encodings. Comments Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. Data type Coding Binding ProductCodeHPKCodelijst ProductCodeHPKCodelijst (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim: CV orim: fhir:Coding rdfs:subClassOf dt:CDCoding v2: CE.1-8, CE.10-22 rim: union(., ./translation) orim: fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
id		0..1	string	There are no (further) constraints on this element Element id Medication.code.coding:productCodeHPKCodelijst.id Short description xml:id (or equivalent in JSON) Definition unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Medication.code.coding:productCodeHPKCodelijst.extension Short description Additional Content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
system	Σ	1..1	uriFixed Value	There are no (further) constraints on this element Element id Medication.code.coding:productCodeHPKCodelijst.system Short description Identity of the terminology system Definition The identification of the code system that defines the meaning of the symbol in the code. Requirements Need to be unambiguous about the source of the definition of the symbol. Comments The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Fixed value urn:oid:2.16.840.1.113883.2.4.4.7 Mappings rim: n/a v2: CE.3 rim:* ./codeSystem orim: fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem
version	Σ	0..1	string	There are no (further) constraints on this element Element id Medication.code.coding:productCodeHPKCodelijst.version Short description Version of the system - if relevant Definition The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured. and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged. Comments Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.7 rim:* ./codeSystemVersion orim: fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion
code	Σ	0..1	code	There are no (further) constraints on this element Element id Medication.code.coding:productCodeHPKCodelijst.code Short description Symbol in syntax defined by the system Definition A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination). Requirements Need to refer to a particular code in the system. Comments Note that FHIR strings may not exceed 1MB in size Data type code Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.1 rim:* ./code orim: fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code
display	Σ	0..1	string	There are no (further) constraints on this element Element id Medication.code.coding:productCodeHPKCodelijst.display Short description Representation defined by the system Definition A representation of the meaning of the code in the system, following the rules of the system. Requirements Need to be able to carry a human-readable meaning of the code for readers that do not know the system. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.2 - but note this is not well followed rim:* CV.displayName orim: fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName
userSelected	Σ	0..1	boolean	There are no (further) constraints on this element Element id Medication.code.coding:productCodeHPKCodelijst.userSelected Short description If this coding was chosen directly by the user Definition Indicates that this coding was chosen by a user directly - i.e. off a pick list of available items (codes or displays). Requirements This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing. Comments Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely. Data type boolean Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: Sometimes implied by being first rim: CD.codingRationale orim: fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]
productCodeGTINCodelijst	Σ	0..1	CodingBinding	There are no (further) constraints on this element Element id Medication.code.coding:productCodeGTINCodelijst Short description Code defined by a terminology system Definition A reference to a code defined by a terminology system. Requirements Allows for translations and alternate encodings within a code system. Also supports communication of the same instance to systems requiring different encodings. Comments Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. Data type Coding Binding ProductCodeGTINCodelijst ProductCodeGTINCodelijst (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim: CV orim: fhir:Coding rdfs:subClassOf dt:CDCoding v2: CE.1-8, CE.10-22 rim: union(., ./translation) orim: fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
id		0..1	string	There are no (further) constraints on this element Element id Medication.code.coding:productCodeGTINCodelijst.id Short description xml:id (or equivalent in JSON) Definition unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Medication.code.coding:productCodeGTINCodelijst.extension Short description Additional Content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
system	Σ	1..1	uriFixed Value	There are no (further) constraints on this element Element id Medication.code.coding:productCodeGTINCodelijst.system Short description Identity of the terminology system Definition The identification of the code system that defines the meaning of the symbol in the code. Requirements Need to be unambiguous about the source of the definition of the symbol. Comments The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Fixed value urn:oid:1.3.160 Mappings rim: n/a v2: CE.3 rim:* ./codeSystem orim: fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem
version	Σ	0..1	string	There are no (further) constraints on this element Element id Medication.code.coding:productCodeGTINCodelijst.version Short description Version of the system - if relevant Definition The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured. and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged. Comments Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.7 rim:* ./codeSystemVersion orim: fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion
code	Σ	0..1	code	There are no (further) constraints on this element Element id Medication.code.coding:productCodeGTINCodelijst.code Short description Symbol in syntax defined by the system Definition A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination). Requirements Need to refer to a particular code in the system. Comments Note that FHIR strings may not exceed 1MB in size Data type code Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.1 rim:* ./code orim: fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code
display	Σ	0..1	string	There are no (further) constraints on this element Element id Medication.code.coding:productCodeGTINCodelijst.display Short description Representation defined by the system Definition A representation of the meaning of the code in the system, following the rules of the system. Requirements Need to be able to carry a human-readable meaning of the code for readers that do not know the system. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.2 - but note this is not well followed rim:* CV.displayName orim: fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName
userSelected	Σ	0..1	boolean	There are no (further) constraints on this element Element id Medication.code.coding:productCodeGTINCodelijst.userSelected Short description If this coding was chosen directly by the user Definition Indicates that this coding was chosen by a user directly - i.e. off a pick list of available items (codes or displays). Requirements This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing. Comments Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely. Data type boolean Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: Sometimes implied by being first rim: CD.codingRationale orim: fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]
productCodeGPKCodelijst	Σ	0..1	CodingBinding	There are no (further) constraints on this element Element id Medication.code.coding:productCodeGPKCodelijst Short description Code defined by a terminology system Definition A reference to a code defined by a terminology system. Requirements Allows for translations and alternate encodings within a code system. Also supports communication of the same instance to systems requiring different encodings. Comments Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. Data type Coding Binding ProductCodeGPKCodelijst ProductCodeGPKCodelijst (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim: CV orim: fhir:Coding rdfs:subClassOf dt:CDCoding v2: CE.1-8, CE.10-22 rim: union(., ./translation) orim: fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
id		0..1	string	There are no (further) constraints on this element Element id Medication.code.coding:productCodeGPKCodelijst.id Short description xml:id (or equivalent in JSON) Definition unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Medication.code.coding:productCodeGPKCodelijst.extension Short description Additional Content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
system	Σ	1..1	uriFixed Value	There are no (further) constraints on this element Element id Medication.code.coding:productCodeGPKCodelijst.system Short description Identity of the terminology system Definition The identification of the code system that defines the meaning of the symbol in the code. Requirements Need to be unambiguous about the source of the definition of the symbol. Comments The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Fixed value urn:oid:2.16.840.1.113883.2.4.4.1 Mappings rim: n/a v2: CE.3 rim:* ./codeSystem orim: fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem
version	Σ	0..1	string	There are no (further) constraints on this element Element id Medication.code.coding:productCodeGPKCodelijst.version Short description Version of the system - if relevant Definition The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured. and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged. Comments Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.7 rim:* ./codeSystemVersion orim: fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion
code	Σ	0..1	code	There are no (further) constraints on this element Element id Medication.code.coding:productCodeGPKCodelijst.code Short description Symbol in syntax defined by the system Definition A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination). Requirements Need to refer to a particular code in the system. Comments Note that FHIR strings may not exceed 1MB in size Data type code Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.1 rim:* ./code orim: fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code
display	Σ	0..1	string	There are no (further) constraints on this element Element id Medication.code.coding:productCodeGPKCodelijst.display Short description Representation defined by the system Definition A representation of the meaning of the code in the system, following the rules of the system. Requirements Need to be able to carry a human-readable meaning of the code for readers that do not know the system. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.2 - but note this is not well followed rim:* CV.displayName orim: fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName
userSelected	Σ	0..1	boolean	There are no (further) constraints on this element Element id Medication.code.coding:productCodeGPKCodelijst.userSelected Short description If this coding was chosen directly by the user Definition Indicates that this coding was chosen by a user directly - i.e. off a pick list of available items (codes or displays). Requirements This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing. Comments Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely. Data type boolean Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: Sometimes implied by being first rim: CD.codingRationale orim: fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]
productCodePRKCodelijst	Σ	0..1	CodingBinding	There are no (further) constraints on this element Element id Medication.code.coding:productCodePRKCodelijst Short description Code defined by a terminology system Definition A reference to a code defined by a terminology system. Requirements Allows for translations and alternate encodings within a code system. Also supports communication of the same instance to systems requiring different encodings. Comments Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. Data type Coding Binding ProductCodePRKCodelijst ProductCodePRKCodelijst (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim: CV orim: fhir:Coding rdfs:subClassOf dt:CDCoding v2: CE.1-8, CE.10-22 rim: union(., ./translation) orim: fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
id		0..1	string	There are no (further) constraints on this element Element id Medication.code.coding:productCodePRKCodelijst.id Short description xml:id (or equivalent in JSON) Definition unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Medication.code.coding:productCodePRKCodelijst.extension Short description Additional Content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
system	Σ	1..1	uriFixed Value	There are no (further) constraints on this element Element id Medication.code.coding:productCodePRKCodelijst.system Short description Identity of the terminology system Definition The identification of the code system that defines the meaning of the symbol in the code. Requirements Need to be unambiguous about the source of the definition of the symbol. Comments The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Fixed value urn:oid:2.16.840.1.113883.2.4.4.10 Mappings rim: n/a v2: CE.3 rim:* ./codeSystem orim: fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem
version	Σ	0..1	string	There are no (further) constraints on this element Element id Medication.code.coding:productCodePRKCodelijst.version Short description Version of the system - if relevant Definition The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured. and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged. Comments Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.7 rim:* ./codeSystemVersion orim: fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion
code	Σ	0..1	code	There are no (further) constraints on this element Element id Medication.code.coding:productCodePRKCodelijst.code Short description Symbol in syntax defined by the system Definition A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination). Requirements Need to refer to a particular code in the system. Comments Note that FHIR strings may not exceed 1MB in size Data type code Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.1 rim:* ./code orim: fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code
display	Σ	0..1	string	There are no (further) constraints on this element Element id Medication.code.coding:productCodePRKCodelijst.display Short description Representation defined by the system Definition A representation of the meaning of the code in the system, following the rules of the system. Requirements Need to be able to carry a human-readable meaning of the code for readers that do not know the system. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.2 - but note this is not well followed rim:* CV.displayName orim: fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName
userSelected	Σ	0..1	boolean	There are no (further) constraints on this element Element id Medication.code.coding:productCodePRKCodelijst.userSelected Short description If this coding was chosen directly by the user Definition Indicates that this coding was chosen by a user directly - i.e. off a pick list of available items (codes or displays). Requirements This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing. Comments Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely. Data type boolean Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: Sometimes implied by being first rim: CD.codingRationale orim: fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]
productCodeATCCodelijst	S Σ	1..1	CodingBinding	There are no (further) constraints on this element Element id Medication.code.coding:productCodeATCCodelijst Short description Code defined by a terminology system Definition A reference to a code defined by a terminology system. Requirements Allows for translations and alternate encodings within a code system. Also supports communication of the same instance to systems requiring different encodings. Comments Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. Data type Coding Binding ProductCodeATCCodelijst ProductCodeATCCodelijst (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim: CV orim: fhir:Coding rdfs:subClassOf dt:CDCoding v2: CE.1-8, CE.10-22 rim: union(., ./translation) orim: fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
id		0..1	string	There are no (further) constraints on this element Element id Medication.code.coding:productCodeATCCodelijst.id Short description xml:id (or equivalent in JSON) Definition unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Medication.code.coding:productCodeATCCodelijst.extension Short description Additional Content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
system	Σ	1..1	uriFixed Value	There are no (further) constraints on this element Element id Medication.code.coding:productCodeATCCodelijst.system Short description Identity of the terminology system Definition The identification of the code system that defines the meaning of the symbol in the code. Requirements Need to be unambiguous about the source of the definition of the symbol. Comments The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Fixed value http://www.whocc.no/atc Mappings rim: n/a v2: CE.3 rim:* ./codeSystem orim: fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem
version	Σ	0..1	string	There are no (further) constraints on this element Element id Medication.code.coding:productCodeATCCodelijst.version Short description Version of the system - if relevant Definition The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured. and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged. Comments Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.7 rim:* ./codeSystemVersion orim: fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion
code	Σ	0..1	code	There are no (further) constraints on this element Element id Medication.code.coding:productCodeATCCodelijst.code Short description Symbol in syntax defined by the system Definition A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination). Requirements Need to refer to a particular code in the system. Comments Note that FHIR strings may not exceed 1MB in size Data type code Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.1 rim:* ./code orim: fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code
display	Σ	0..1	string	There are no (further) constraints on this element Element id Medication.code.coding:productCodeATCCodelijst.display Short description Representation defined by the system Definition A representation of the meaning of the code in the system, following the rules of the system. Requirements Need to be able to carry a human-readable meaning of the code for readers that do not know the system. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.2 - but note this is not well followed rim:* CV.displayName orim: fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName
userSelected	Σ	0..1	boolean	There are no (further) constraints on this element Element id Medication.code.coding:productCodeATCCodelijst.userSelected Short description If this coding was chosen directly by the user Definition Indicates that this coding was chosen by a user directly - i.e. off a pick list of available items (codes or displays). Requirements This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing. Comments Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely. Data type boolean Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: Sometimes implied by being first rim: CD.codingRationale orim: fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]
text	Σ	0..1	string	There are no (further) constraints on this element Element id Medication.code.text Short description Medication Alternate names ProductNaam, Geneesmiddel Definition There is no code for medication entered in free text. In these cases, enter the complete description. Requirements The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source. Comments Very often the text is the same as a displayName of one of the codings. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Examples Example of Medication as free text PARACETAMOL 500MG TABLET Mappings rim: n/a v2: CE.9. But note many systems use CE.2 for this rim: ./originalText[mediaType/code="text/plain"]/data orim: fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText hcim-pharmaceuticalproduct-v2.0-2017EN: NL-CM:9.7.19929
status	Σ	0..1	codeBinding	There are no (further) constraints on this element Element id Medication.status Short description active \| inactive \| entered-in-error Definition A code to indicate if the medication is in active use. Comments This status is not intended to specify if a medication is part of a formulary. Data type code Binding A coded concept defining if the medication is in active use MedicationStatus (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a rim: .statusCode
isBrand	Σ	0..1	boolean	There are no (further) constraints on this element Element id Medication.isBrand Short description True if a brand Definition Set to true if the item is attributable to a specific manufacturer. Data type boolean Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a script10.6: no mapping rim: true if .player.scopingRole[typeCode=MANU] exists w5: class
isOverTheCounter	Σ	0..1	boolean	There are no (further) constraints on this element Element id Medication.isOverTheCounter Short description True if medication does not require a prescription Definition Set to true if the medication can be obtained without an order from a prescriber. Data type boolean Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a rim: NA w5: class
manufacturer	Σ I	0..1	Reference(Organization)	There are no (further) constraints on this element Element id Medication.manufacturer Short description Manufacturer of the item Definition Describes the details of the manufacturer of the medication product. This is not intended to represent the distributor of a medication product. Comments References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository. Data type Reference(Organization) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %resource.contained.id.trace('ids'))` Mappings rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity) script10.6: no mapping v2: RXD-20-Substance Manufacturer Name / RXG-21-Substance Manufacturer Name / RXA-17-Substance Manufacturer Name rim: .player.scopingRole[typeCode=MANU].scoper w5: who.actor
form		0..1	CodeableConceptBinding	There are no (further) constraints on this element Element id Medication.form Short description PharmaceuticalForm Alternate names FarmaceutischeVorm Definition The pharmaceutical form indicates the form of the medication in accordance with the route of administration. Examples include: tablet, suppository, infusion liquid, ointment. If the product has a generic code in the G standard, the form will be known in the G standard. For products without a code (free text, preparation by the pharmacy), the means of administration can be entered. Comments When Medication is referenced from MedicationRequest, this is the ordered form. When Medication is referenced within MedicationDispense, this is the dispensed form. When Medication is referenced within MedicationAdministration, this is administered form. Data type CodeableConcept Binding FarmaceutischeVormCodelijst FarmaceutischeVormCodelijst (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Examples Example of Pharmaceutical form { "coding": [ { "system": "urn:oid:2.16.840.1.113883.2.4.4.11", "code": "230", "display": "TABLET" } ] } Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD script10.6: coding.code = //element(,DrugCodedType)/FormCode coding.system = //element(,DrugCodedType)/FormSourceCode v2: RXO-5-Requested Dosage Form / RXE-6-Give Dosage Form / RXD-6-Actual Dosage Form / RXG-8-Give Dosage Form / RXA-8-Administered Dosage Form rim: .formCode hcim-pharmaceuticalproduct-v2.0-2017EN: NL-CM:9.7.19931
ingredient		0..*	BackboneElement	There are no (further) constraints on this element Element id Medication.ingredient Short description Ingredient Alternate names Ingredient Definition Container of the Ingredient concept. This container contains all data elements of the Ingredient concept. A product contains one or more active substances and excipients. These are usually determined by the product code. For medication prepared or compounded by the local pharmacy, each ingredient must be entered separately. The active substances play an important role, as they: a) determine the pharmacotherapeutic effect of the medication and b) serve as the basis for the indication of the strength of the medication (e.g. 200mg). Comments The ingredients need not be a complete list. If an ingredient is not specified, this does not indicate whether an ingredient is present or absent. If an ingredient is specified it does not mean that all ingredients are specified. It is possible to specify both inactive and active ingredients. If the Medication.code does not fully specify the Medication (i.e. own preparation), all known ingredients by the source system must be conveyed. Data type BackboneElement Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a rim: .scopesRole[typeCode=INGR] hcim-pharmaceuticalproduct-v2.0-2017EN: NL-CM:9.7.19932
id		0..1	string	There are no (further) constraints on this element Element id Medication.ingredient.id Short description xml:id (or equivalent in JSON) Definition unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Medication.ingredient.extension Short description Additional Content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id Medication.ingredient.modifierExtension Short description Extensions that cannot be ignored Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
itemCodeableConcept		1..1	CodeableConcept	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept Short description Substance Alternate names IngredientCode Definition Active substance or excipient. Here, the same codes can be used as for the ProductCode (for dilutions and compounds in particular), but now, the ATC, SSK and SNK codes can also be used to indicate a substance (to list ingredients of local products prepared by the pharmacy). GTIN International Article Number KNMP article number Trade product code (HPK) Prescription code (PRK) Generic product code (GPK) ATC (anatomic therapeutic classification) SSK (substance name code with route of administration) SNK (substance name code) The ATC is an international classification of pharmaceutical substances without a reference to specific products on the market. Therefore, the ATC code of a generic product will not contain a reference to a certain dose, pharmaceutical form or route of administration; it will only contain a reference to the ingredients (not the amount/concentration/strength). Data type CodeableConcept Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Examples Example of Ingredient substance { "coding": [ { "system": "http://www.whocc.no/atc", "code": "B01AC08", "display": "carbasalate calcium" } ] } Mappings rim: n/a script10.6: coding.code = //element(,MedicationType)/DrugCoded/ProductCode coding.system = //element(,MedicationType)/DrugCoded/ProductCodeQualifier coding.display = //element(,MedicationType)/DrugDescription v2:* RXC-2-Component Code if medication: RXO-1-Requested Give Code / RXE-2-Give Code / RXD-2-Dispense/Give Code / RXG-4-Give Code / RXA-5-Administered Code rim: .player hcim-pharmaceuticalproduct-v2.0-2017EN: NL-CM:9.7.19934
id		0..1	string	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.id Short description xml:id (or equivalent in JSON) Definition unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.extension Short description Additional Content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
coding	Σ	0..*	Coding	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding Short description Code defined by a terminology system Definition A reference to a code defined by a terminology system. Requirements Allows for translations and alternate encodings within a code system. Also supports communication of the same instance to systems requiring different encodings. Comments Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. Data type Coding Sliced: Unordered, Open, by system(Value) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim: CV orim: fhir:Coding rdfs:subClassOf dt:CDCoding v2: CE.1-8, CE.10-22 rim: union(., ./translation) orim: fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
ingredientCodeZICodelijst	Σ	0..*	CodingBinding	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeZICodelijst Short description Code defined by a terminology system Definition A reference to a code defined by a terminology system. Requirements Allows for translations and alternate encodings within a code system. Also supports communication of the same instance to systems requiring different encodings. Comments Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. Data type Coding Binding IngredientCodeZICodelijst IngredientCodeZICodelijst (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim: CV orim: fhir:Coding rdfs:subClassOf dt:CDCoding v2: CE.1-8, CE.10-22 rim: union(., ./translation) orim: fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
id		0..1	string	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeZICodelijst.id Short description xml:id (or equivalent in JSON) Definition unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeZICodelijst.extension Short description Additional Content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
system	Σ	1..1	uriFixed Value	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeZICodelijst.system Short description Identity of the terminology system Definition The identification of the code system that defines the meaning of the symbol in the code. Requirements Need to be unambiguous about the source of the definition of the symbol. Comments The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Fixed value urn:oid:2.16.840.1.113883.2.4.4.8 Mappings rim: n/a v2: CE.3 rim:* ./codeSystem orim: fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem
version	Σ	0..1	string	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeZICodelijst.version Short description Version of the system - if relevant Definition The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured. and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged. Comments Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.7 rim:* ./codeSystemVersion orim: fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion
code	Σ	0..1	code	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeZICodelijst.code Short description Symbol in syntax defined by the system Definition A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination). Requirements Need to refer to a particular code in the system. Comments Note that FHIR strings may not exceed 1MB in size Data type code Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.1 rim:* ./code orim: fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code
display	Σ	0..1	string	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeZICodelijst.display Short description Representation defined by the system Definition A representation of the meaning of the code in the system, following the rules of the system. Requirements Need to be able to carry a human-readable meaning of the code for readers that do not know the system. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.2 - but note this is not well followed rim:* CV.displayName orim: fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName
userSelected	Σ	0..1	boolean	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeZICodelijst.userSelected Short description If this coding was chosen directly by the user Definition Indicates that this coding was chosen by a user directly - i.e. off a pick list of available items (codes or displays). Requirements This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing. Comments Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely. Data type boolean Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: Sometimes implied by being first rim: CD.codingRationale orim: fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]
ingredientCodeGTINCodeLijst	Σ	0..*	CodingBinding	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeGTINCodeLijst Short description Code defined by a terminology system Definition A reference to a code defined by a terminology system. Requirements Allows for translations and alternate encodings within a code system. Also supports communication of the same instance to systems requiring different encodings. Comments Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. Data type Coding Binding IngredientCodeGTINCodeLijst IngredientCodeGTINCodeLijst (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim: CV orim: fhir:Coding rdfs:subClassOf dt:CDCoding v2: CE.1-8, CE.10-22 rim: union(., ./translation) orim: fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
id		0..1	string	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeGTINCodeLijst.id Short description xml:id (or equivalent in JSON) Definition unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeGTINCodeLijst.extension Short description Additional Content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
system	Σ	1..1	uriFixed Value	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeGTINCodeLijst.system Short description Identity of the terminology system Definition The identification of the code system that defines the meaning of the symbol in the code. Requirements Need to be unambiguous about the source of the definition of the symbol. Comments The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Fixed value urn:oid:1.3.160 Mappings rim: n/a v2: CE.3 rim:* ./codeSystem orim: fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem
version	Σ	0..1	string	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeGTINCodeLijst.version Short description Version of the system - if relevant Definition The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured. and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged. Comments Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.7 rim:* ./codeSystemVersion orim: fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion
code	Σ	0..1	code	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeGTINCodeLijst.code Short description Symbol in syntax defined by the system Definition A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination). Requirements Need to refer to a particular code in the system. Comments Note that FHIR strings may not exceed 1MB in size Data type code Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.1 rim:* ./code orim: fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code
display	Σ	0..1	string	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeGTINCodeLijst.display Short description Representation defined by the system Definition A representation of the meaning of the code in the system, following the rules of the system. Requirements Need to be able to carry a human-readable meaning of the code for readers that do not know the system. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.2 - but note this is not well followed rim:* CV.displayName orim: fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName
userSelected	Σ	0..1	boolean	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeGTINCodeLijst.userSelected Short description If this coding was chosen directly by the user Definition Indicates that this coding was chosen by a user directly - i.e. off a pick list of available items (codes or displays). Requirements This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing. Comments Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely. Data type boolean Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: Sometimes implied by being first rim: CD.codingRationale orim: fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]
ingredientCodeATCCodelijst	Σ	0..*	CodingBinding	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeATCCodelijst Short description Code defined by a terminology system Definition A reference to a code defined by a terminology system. Requirements Allows for translations and alternate encodings within a code system. Also supports communication of the same instance to systems requiring different encodings. Comments Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. Data type Coding Binding IngredientCodeATCCodelijst IngredientCodeATCCodelijst (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim: CV orim: fhir:Coding rdfs:subClassOf dt:CDCoding v2: CE.1-8, CE.10-22 rim: union(., ./translation) orim: fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
id		0..1	string	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeATCCodelijst.id Short description xml:id (or equivalent in JSON) Definition unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeATCCodelijst.extension Short description Additional Content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
system	Σ	1..1	uriFixed Value	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeATCCodelijst.system Short description Identity of the terminology system Definition The identification of the code system that defines the meaning of the symbol in the code. Requirements Need to be unambiguous about the source of the definition of the symbol. Comments The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Fixed value http://www.whocc.no/atc Mappings rim: n/a v2: CE.3 rim:* ./codeSystem orim: fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem
version	Σ	0..1	string	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeATCCodelijst.version Short description Version of the system - if relevant Definition The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured. and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged. Comments Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.7 rim:* ./codeSystemVersion orim: fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion
code	Σ	0..1	code	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeATCCodelijst.code Short description Symbol in syntax defined by the system Definition A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination). Requirements Need to refer to a particular code in the system. Comments Note that FHIR strings may not exceed 1MB in size Data type code Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.1 rim:* ./code orim: fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code
display	Σ	0..1	string	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeATCCodelijst.display Short description Representation defined by the system Definition A representation of the meaning of the code in the system, following the rules of the system. Requirements Need to be able to carry a human-readable meaning of the code for readers that do not know the system. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.2 - but note this is not well followed rim:* CV.displayName orim: fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName
userSelected	Σ	0..1	boolean	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeATCCodelijst.userSelected Short description If this coding was chosen directly by the user Definition Indicates that this coding was chosen by a user directly - i.e. off a pick list of available items (codes or displays). Requirements This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing. Comments Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely. Data type boolean Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: Sometimes implied by being first rim: CD.codingRationale orim: fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]
ingredientCodeHPKLijst	Σ	0..*	CodingBinding	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeHPKLijst Short description Code defined by a terminology system Definition A reference to a code defined by a terminology system. Requirements Allows for translations and alternate encodings within a code system. Also supports communication of the same instance to systems requiring different encodings. Comments Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. Data type Coding Binding IngredientCodeHPKLijst IngredientCodeHPKLijst (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim: CV orim: fhir:Coding rdfs:subClassOf dt:CDCoding v2: CE.1-8, CE.10-22 rim: union(., ./translation) orim: fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
id		0..1	string	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeHPKLijst.id Short description xml:id (or equivalent in JSON) Definition unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeHPKLijst.extension Short description Additional Content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
system	Σ	1..1	uriFixed Value	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeHPKLijst.system Short description Identity of the terminology system Definition The identification of the code system that defines the meaning of the symbol in the code. Requirements Need to be unambiguous about the source of the definition of the symbol. Comments The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Fixed value urn:oid:2.16.840.1.113883.2.4.4.7 Mappings rim: n/a v2: CE.3 rim:* ./codeSystem orim: fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem
version	Σ	0..1	string	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeHPKLijst.version Short description Version of the system - if relevant Definition The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured. and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged. Comments Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.7 rim:* ./codeSystemVersion orim: fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion
code	Σ	0..1	code	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeHPKLijst.code Short description Symbol in syntax defined by the system Definition A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination). Requirements Need to refer to a particular code in the system. Comments Note that FHIR strings may not exceed 1MB in size Data type code Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.1 rim:* ./code orim: fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code
display	Σ	0..1	string	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeHPKLijst.display Short description Representation defined by the system Definition A representation of the meaning of the code in the system, following the rules of the system. Requirements Need to be able to carry a human-readable meaning of the code for readers that do not know the system. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.2 - but note this is not well followed rim:* CV.displayName orim: fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName
userSelected	Σ	0..1	boolean	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeHPKLijst.userSelected Short description If this coding was chosen directly by the user Definition Indicates that this coding was chosen by a user directly - i.e. off a pick list of available items (codes or displays). Requirements This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing. Comments Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely. Data type boolean Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: Sometimes implied by being first rim: CD.codingRationale orim: fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]
ingredientCodeGPKLijst	Σ	0..*	CodingBinding	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeGPKLijst Short description Code defined by a terminology system Definition A reference to a code defined by a terminology system. Requirements Allows for translations and alternate encodings within a code system. Also supports communication of the same instance to systems requiring different encodings. Comments Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. Data type Coding Binding IngredientCodeGPKLijst IngredientCodeGPKLijst (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim: CV orim: fhir:Coding rdfs:subClassOf dt:CDCoding v2: CE.1-8, CE.10-22 rim: union(., ./translation) orim: fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
id		0..1	string	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeGPKLijst.id Short description xml:id (or equivalent in JSON) Definition unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeGPKLijst.extension Short description Additional Content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
system	Σ	1..1	uriFixed Value	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeGPKLijst.system Short description Identity of the terminology system Definition The identification of the code system that defines the meaning of the symbol in the code. Requirements Need to be unambiguous about the source of the definition of the symbol. Comments The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Fixed value urn:oid:2.16.840.1.113883.2.4.4.1 Mappings rim: n/a v2: CE.3 rim:* ./codeSystem orim: fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem
version	Σ	0..1	string	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeGPKLijst.version Short description Version of the system - if relevant Definition The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured. and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged. Comments Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.7 rim:* ./codeSystemVersion orim: fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion
code	Σ	0..1	code	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeGPKLijst.code Short description Symbol in syntax defined by the system Definition A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination). Requirements Need to refer to a particular code in the system. Comments Note that FHIR strings may not exceed 1MB in size Data type code Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.1 rim:* ./code orim: fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code
display	Σ	0..1	string	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeGPKLijst.display Short description Representation defined by the system Definition A representation of the meaning of the code in the system, following the rules of the system. Requirements Need to be able to carry a human-readable meaning of the code for readers that do not know the system. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.2 - but note this is not well followed rim:* CV.displayName orim: fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName
userSelected	Σ	0..1	boolean	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeGPKLijst.userSelected Short description If this coding was chosen directly by the user Definition Indicates that this coding was chosen by a user directly - i.e. off a pick list of available items (codes or displays). Requirements This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing. Comments Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely. Data type boolean Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: Sometimes implied by being first rim: CD.codingRationale orim: fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]
ingredientCodeSNKLijst	Σ	0..*	CodingBinding	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeSNKLijst Short description Code defined by a terminology system Definition A reference to a code defined by a terminology system. Requirements Allows for translations and alternate encodings within a code system. Also supports communication of the same instance to systems requiring different encodings. Comments Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. Data type Coding Binding IngredientCodeSNKLijst IngredientCodeSNKLijst (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim: CV orim: fhir:Coding rdfs:subClassOf dt:CDCoding v2: CE.1-8, CE.10-22 rim: union(., ./translation) orim: fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
id		0..1	string	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeSNKLijst.id Short description xml:id (or equivalent in JSON) Definition unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeSNKLijst.extension Short description Additional Content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
system	Σ	1..1	uriFixed Value	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeSNKLijst.system Short description Identity of the terminology system Definition The identification of the code system that defines the meaning of the symbol in the code. Requirements Need to be unambiguous about the source of the definition of the symbol. Comments The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Fixed value urn:oid:2.16.840.1.113883.2.4.4.1.750 Mappings rim: n/a v2: CE.3 rim:* ./codeSystem orim: fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem
version	Σ	0..1	string	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeSNKLijst.version Short description Version of the system - if relevant Definition The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured. and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged. Comments Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.7 rim:* ./codeSystemVersion orim: fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion
code	Σ	0..1	code	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeSNKLijst.code Short description Symbol in syntax defined by the system Definition A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination). Requirements Need to refer to a particular code in the system. Comments Note that FHIR strings may not exceed 1MB in size Data type code Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.1 rim:* ./code orim: fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code
display	Σ	0..1	string	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeSNKLijst.display Short description Representation defined by the system Definition A representation of the meaning of the code in the system, following the rules of the system. Requirements Need to be able to carry a human-readable meaning of the code for readers that do not know the system. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.2 - but note this is not well followed rim:* CV.displayName orim: fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName
userSelected	Σ	0..1	boolean	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeSNKLijst.userSelected Short description If this coding was chosen directly by the user Definition Indicates that this coding was chosen by a user directly - i.e. off a pick list of available items (codes or displays). Requirements This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing. Comments Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely. Data type boolean Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: Sometimes implied by being first rim: CD.codingRationale orim: fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]
ingredientCodePRKLijst	Σ	0..*	CodingBinding	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodePRKLijst Short description Code defined by a terminology system Definition A reference to a code defined by a terminology system. Requirements Allows for translations and alternate encodings within a code system. Also supports communication of the same instance to systems requiring different encodings. Comments Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. Data type Coding Binding IngredientCodePRKLijst IngredientCodePRKLijst (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim: CV orim: fhir:Coding rdfs:subClassOf dt:CDCoding v2: CE.1-8, CE.10-22 rim: union(., ./translation) orim: fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
id		0..1	string	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodePRKLijst.id Short description xml:id (or equivalent in JSON) Definition unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodePRKLijst.extension Short description Additional Content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
system	Σ	1..1	uriFixed Value	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodePRKLijst.system Short description Identity of the terminology system Definition The identification of the code system that defines the meaning of the symbol in the code. Requirements Need to be unambiguous about the source of the definition of the symbol. Comments The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Fixed value urn:oid:2.16.840.1.113883.2.4.4.10 Mappings rim: n/a v2: CE.3 rim:* ./codeSystem orim: fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem
version	Σ	0..1	string	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodePRKLijst.version Short description Version of the system - if relevant Definition The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured. and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged. Comments Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.7 rim:* ./codeSystemVersion orim: fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion
code	Σ	0..1	code	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodePRKLijst.code Short description Symbol in syntax defined by the system Definition A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination). Requirements Need to refer to a particular code in the system. Comments Note that FHIR strings may not exceed 1MB in size Data type code Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.1 rim:* ./code orim: fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code
display	Σ	0..1	string	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodePRKLijst.display Short description Representation defined by the system Definition A representation of the meaning of the code in the system, following the rules of the system. Requirements Need to be able to carry a human-readable meaning of the code for readers that do not know the system. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.2 - but note this is not well followed rim:* CV.displayName orim: fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName
userSelected	Σ	0..1	boolean	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodePRKLijst.userSelected Short description If this coding was chosen directly by the user Definition Indicates that this coding was chosen by a user directly - i.e. off a pick list of available items (codes or displays). Requirements This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing. Comments Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely. Data type boolean Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: Sometimes implied by being first rim: CD.codingRationale orim: fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]
ingredientCodeSSKLijst	Σ	0..*	CodingBinding	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeSSKLijst Short description Code defined by a terminology system Definition A reference to a code defined by a terminology system. Requirements Allows for translations and alternate encodings within a code system. Also supports communication of the same instance to systems requiring different encodings. Comments Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. Data type Coding Binding IngredientCodeSSKLijst IngredientCodeSSKLijst (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim: CV orim: fhir:Coding rdfs:subClassOf dt:CDCoding v2: CE.1-8, CE.10-22 rim: union(., ./translation) orim: fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
id		0..1	string	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeSSKLijst.id Short description xml:id (or equivalent in JSON) Definition unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeSSKLijst.extension Short description Additional Content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
system	Σ	1..1	uriFixed Value	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeSSKLijst.system Short description Identity of the terminology system Definition The identification of the code system that defines the meaning of the symbol in the code. Requirements Need to be unambiguous about the source of the definition of the symbol. Comments The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Fixed value urn:oid:2.16.840.1.113883.2.4.4.1.725 Mappings rim: n/a v2: CE.3 rim:* ./codeSystem orim: fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem
version	Σ	0..1	string	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeSSKLijst.version Short description Version of the system - if relevant Definition The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured. and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged. Comments Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.7 rim:* ./codeSystemVersion orim: fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion
code	Σ	0..1	code	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeSSKLijst.code Short description Symbol in syntax defined by the system Definition A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination). Requirements Need to refer to a particular code in the system. Comments Note that FHIR strings may not exceed 1MB in size Data type code Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.1 rim:* ./code orim: fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code
display	Σ	0..1	string	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeSSKLijst.display Short description Representation defined by the system Definition A representation of the meaning of the code in the system, following the rules of the system. Requirements Need to be able to carry a human-readable meaning of the code for readers that do not know the system. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.2 - but note this is not well followed rim:* CV.displayName orim: fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName
userSelected	Σ	0..1	boolean	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeSSKLijst.userSelected Short description If this coding was chosen directly by the user Definition Indicates that this coding was chosen by a user directly - i.e. off a pick list of available items (codes or displays). Requirements This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing. Comments Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely. Data type boolean Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: Sometimes implied by being first rim: CD.codingRationale orim: fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]
text	Σ	0..1	string	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.text Short description Plain text representation of the concept Definition A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user. Requirements The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source. Comments Very often the text is the same as a displayName of one of the codings. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.9. But note many systems use CE.2 for this rim: ./originalText[mediaType/code="text/plain"]/data orim: fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText
isActive		0..1	boolean	There are no (further) constraints on this element Element id Medication.ingredient.isActive Short description Active ingredient indicator Definition Indication of whether this ingredient affects the therapeutic action of the drug. Requirements True indicates that the ingredient affects the therapeutic action of the drug (i.e. active). False indicates that the ingredient does not affect the therapeutic action of the drug (i.e. inactive). Data type boolean Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a rim: NA
amount	I	0..1	Ratio	There are no (further) constraints on this element Element id Medication.ingredient.amount Short description Concentration Alternate names Sterkte, Concentratie, Hoeveelheid Definition The relative amount of this ingredient in this product. Calculation of Concentration = Ingredient Amount ÷ Product Amount. This could be a concentration if the medication is dissolved in liquid, for example: 25mg/tablet or 50IE/ml of 200mg/500ml. Data type Ratio Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` rat-1: Numerator and denominator SHALL both be present, or both are absent. If both are absent, there SHALL be some extension present `(numerator.empty() xor denominator.exists()) and (numerator.exists() or extension.exists())` Examples Example of Concentration { "numerator": { "value": 5, "unit": "ml", "system": "http://unitsofmeasure.org", "code": "mL" }, "denominator": { "value": 200, "unit": "ml", "system": "http://unitsofmeasure.org", "code": "mL" } } Mappings rim: n/a v2: N/A rim: RTO script10.6: //element(,DrugCodedType)/Strength v2:* RXC-3-Component Amount & RXC-4-Component Units if medication: RXO-2-Requested Give Amount - Minimum & RXO-4-Requested Give Units / RXO-3-Requested Give Amount - Maximum & RXO-4-Requested Give Units / RXO-11-Requested Dispense Amount & RXO-12-Requested Dispense Units / RXE-3-Give Amount - Minimum & RXE-5-Give Units / RXE-4-Give Amount - Maximum & RXE-5-Give Units / RXE-10-Dispense Amount & RXE-10-Dispense Units rim: .quantity hcim-pharmaceuticalproduct-v2.0-2017EN: NL-CM:9.7.19933
id		0..1	string	There are no (further) constraints on this element Element id Medication.ingredient.amount.id Short description xml:id (or equivalent in JSON) Definition unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Medication.ingredient.amount.extension Short description Additional Content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
numerator	Σ I	0..1	Quantity	There are no (further) constraints on this element Element id Medication.ingredient.amount.numerator Short description IngredientAmount Alternate names IngredientHoeveelheid Definition The amount of this ingredient. This is the numerator for the calculation of the concentration. The unit should be selected from the G-Standard (Table 902) Comments The context of use may frequently define what kind of quantity this is and therefore what kind of units can be used. The context of use may also restrict the values for the comparator. Data type Quantity Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` qty-3: If a code for the unit is present, the system SHALL also be present `code.empty() or system.exists()` Mappings rim: n/a v2: SN (see also Range) or CQ rim: PQ, IVL<PQ>, MO, CO, depending on the values rim: .numerator hcim-pharmaceuticalproduct-v2.0-2017EN: NL-CM:9.7.22277
denominator	Σ I	0..1	Quantity	There are no (further) constraints on this element Element id Medication.ingredient.amount.denominator Short description ProductAmount Alternate names ProductHoeveelheid Definition Amount of the product. This is the denominator for the calculation of the concentration Comments The context of use may frequently define what kind of quantity this is and therefore what kind of units can be used. The context of use may also restrict the values for the comparator. Data type Quantity Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` qty-3: If a code for the unit is present, the system SHALL also be present `code.empty() or system.exists()` Mappings rim: n/a v2: SN (see also Range) or CQ rim: PQ, IVL<PQ>, MO, CO, depending on the values rim: .denominator hcim-pharmaceuticalproduct-v2.0-2017EN: NL-CM:9.7.22278
package		0..1	BackboneElement	There are no (further) constraints on this element Element id Medication.package Short description Details about packaged medications Definition Information that only applies to packages (not products). Data type BackboneElement Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a script10.6: no mapping rim: .player[classCode=CONT]
id		0..1	string	There are no (further) constraints on this element Element id Medication.package.id Short description xml:id (or equivalent in JSON) Definition unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Medication.package.extension Short description Additional Content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id Medication.package.modifierExtension Short description Extensions that cannot be ignored Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
container		0..1	CodeableConcept	There are no (further) constraints on this element Element id Medication.package.container Short description E.g. box, vial, blister-pack Definition The kind of container that this package comes as. Comments Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination. Data type CodeableConcept Binding A coded concept defining the kind of container a medication package is packaged in MedicationContainer (example) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD script10.6: no mapping rim: .code
content		0..*	BackboneElement	There are no (further) constraints on this element Element id Medication.package.content Short description What is in the package Definition A set of components that go to make up the described item. Data type BackboneElement Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a script10.6: no mapping rim: .scopesRole[typeCode=CONT]
id		0..1	string	There are no (further) constraints on this element Element id Medication.package.content.id Short description xml:id (or equivalent in JSON) Definition unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Medication.package.content.extension Short description Additional Content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id Medication.package.content.modifierExtension Short description Extensions that cannot be ignored Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
item[x]		1..1		There are no (further) constraints on this element Element id Medication.package.content.item[x] Short description The item in the package Definition Identifies one of the items in the package. Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a script10.6: no mapping rim: .player
itemCodeableConcept			CodeableConcept	There are no (further) constraints on this element Data type CodeableConcept
itemReference			Reference(HCIM PharmaceuticalProduct)	There are no (further) constraints on this element Data type Reference(HCIM PharmaceuticalProduct)
amount	I	0..1	SimpleQuantity	There are no (further) constraints on this element Element id Medication.package.content.amount Short description Quantity present in the package Definition The amount of the product that is in the package. Comments The context of use may frequently define what kind of quantity this is and therefore what kind of units can be used. The context of use may also restrict the values for the comparator. Data type SimpleQuantity Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` qty-3: If a code for the unit is present, the system SHALL also be present `code.empty() or system.exists()` sqty-1: The comparator is not used on a SimpleQuantity `comparator.empty()` Mappings rim: n/a v2: SN (see also Range) or CQ rim: PQ, IVL<PQ>, MO, CO, depending on the values script10.6: no mapping rim: .quantity
batch		0..*	BackboneElement	There are no (further) constraints on this element Element id Medication.package.batch Short description Identifies a single production run Definition Information about a group of medication produced or packaged from one production run. Data type BackboneElement Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a script10.6: no mapping rim: participation[typeCode=CSM].role[classCode=INST].scopedRole.scoper[classCode=MMAT].id
id		0..1	string	There are no (further) constraints on this element Element id Medication.package.batch.id Short description xml:id (or equivalent in JSON) Definition unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Medication.package.batch.extension Short description Additional Content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id Medication.package.batch.modifierExtension Short description Extensions that cannot be ignored Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
lotNumber		0..1	string	There are no (further) constraints on this element Element id Medication.package.batch.lotNumber Short description Identifier assigned to batch Definition The assigned lot number of a batch of the specified product. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a script10.6: no mapping v2: RXA-15 Substance Lot Number / RXG-19 Substance Lot Number rim: .id
expirationDate		0..1	dateTime	There are no (further) constraints on this element Element id Medication.package.batch.expirationDate Short description When batch will expire Definition When this specific batch of product will expire. Data type dateTime Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a script10.6: no mapping v2: RXA-16 Substance Expiration Date / RXG-20 Substance Expiration Date rim: participation[typeCode=CSM].role[classCode=INST].scopedRole.scoper[classCode=MMAT].expirationTime
image	I	0..*	Attachment	There are no (further) constraints on this element Element id Medication.image Short description Picture of the medication Definition Photo(s) or graphic representation(s) of the medication. Requirements Note that "image" is only applicable when the medication.code represents a physical item (e.g. Amoxil 250 mg capsule) and not an abstract item (e.g. amoxicillin 250 mg). Comments When providing a summary view (for example with Observation.value[x]) Attachment should be represented with a brief display text such as "Attachment". Data type Attachment Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` att-1: It the Attachment has data, it SHALL have a contentType `data.empty() or contentType.exists()` Mappings rim: n/a v2: ED/RP rim: ED rim: .participation[typeCode=SUBJ].role[classCode=MANU],source[classCode=OBS,moodCode=EVN,code="type of image"].value(ED.image)

Medication	I		Medication	There are no (further) constraints on this element Element id Medication Short description Product Alternate names Geneesmiddel Definition Root concept of the Product partial information model. This root concept contains all data elements of the Product partial information model. The prescribed product is usually a medicine. However, medical aids and bandages can also be prescribed and supplied via the pharmacy. Strictly speaking, food and blood products do not belong in the medication category, but can be prescribed and supplied by a pharmacy as well. A type of medication can be indicated with a single codeThat code can be chosen from several possible coding systems (concretely: GPK, PRK, HPK or article numbers). Correct use of these codes in the software systems will sufficiently record the composition of the product used, making a complete product specification unnecessary. In addition to a primary code, alternative codes from other coding systems can also be entered (so that the GPK can be sent along in the event that the patient was registered based on PRK, for example). Entering multiple ingredients will enable you to display a compound product. If one of the composite parts is liquid, the dosage will be given in milliliters; otherwise it will be given in ‘units’. In that case, the composition of the medicationcan be specified implicitly (with the use of a medication code) or explicitly, for example by listing the (active) substance(s) of the medication. Prescriptions to be prepared by the pharmacy can be entered as well. This can be done by means of the option listed above to enter coded ingredients and/or by entering the composition and preparation method as free text. Data type Medication Constraints dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources `contained.contained.empty()` dom-1: If the resource is contained in another resource, it SHALL NOT contain any narrative `contained.text.empty()` dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated `contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()` dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource `contained.where(('#'+id in %resource.descendants().reference).not()).empty()` Mappings rim: Entity. Role, or Act script10.6: NewRx/MedicationPrescribed -or- RxFill/MedicationDispensed -or- RxHistoryResponse/MedicationDispensed -or- RxHistoryResponse/MedicationPrescribed rim: ManufacturedProduct[classCode=ADMM] w5: clinical.medication hcim-pharmaceuticalproduct-v2.0-2017EN: NL-CM:9.7.19926
id	Σ	0..1	id	There are no (further) constraints on this element Element id Medication.id Short description Logical id of this artifact Definition The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes. Comments The only time that a resource does not have an id is when it is being submitted to the server using a create operation. Data type id Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a
meta	Σ	0..1	Meta	There are no (further) constraints on this element Element id Medication.meta Short description Metadata about the resource Definition The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content may not always be associated with version changes to the resource. Data type Meta Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a rim: N/A
implicitRules	Σ ?!	0..1	uri	There are no (further) constraints on this element Element id Medication.implicitRules Short description A set of rules under which this content was created Definition A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Comments Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. This element is labelled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a
language		0..1	codeBinding	There are no (further) constraints on this element Element id Medication.language Short description Language of the resource content Definition The base language in which the resource is written. Comments Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute). Data type code Binding A human language. Common Languages (extensible) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a
text	I	0..1	Narrative	There are no (further) constraints on this element Element id Medication.text Short description Text summary of the resource, for human interpretation Alternate names narrative, html, xhtml, display Definition A human-readable narrative that contains a summary of the resource, and may be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety. Comments Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded in formation is added later. Data type Narrative Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a rim: N/A rim: Act.text?
contained		0..*	Resource	There are no (further) constraints on this element Element id Medication.contained Short description Contained, inline Resources Alternate names inline resources, anonymous resources, contained resources Definition These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope. Comments This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Data type Resource Mappings rim: Entity. Role, or Act rim: N/A
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Medication.extension Short description Additional Content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the resource. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
description	I	0..1	Extension(string)	There are no (further) constraints on this element Element id Medication.extension:description Short description Description Alternate names extensions, user content, Omschrijving Definition A textual description of the type of medication (including relevant properties of the composition and preparation method if possible), which is only used if no coded indication from the G Standard is available (magistral preparation). Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension(string) Extension URL http://nictiz.nl/fhir/StructureDefinition/zib-Product-Description Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A hcim-pharmaceuticalproduct-v2.0-2017EN: NL-CM:9.7.19784
modifierExtension	?! I	0..*	Extension	There are no (further) constraints on this element Element id Medication.modifierExtension Short description Extensions that cannot be ignored Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the resource, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
code	Σ	0..1	CodeableConcept	Element id Medication.code Short description Codes that identify this medication Definition A code (or set of codes) that specify this medication, or a textual description if no code is available. Usage note: This could be a standard medication code such as a code from RxNorm, SNOMED CT, IDMP etc. It could also be a national or local formulary code, optionally with translations to other code systems. Only a few medication related codes are relevant for NICE, only codes pertaining to the ATC groups listed below will be processed [NICE dataelement : ATC-codes or ATC-(sub)group codes]: Chronic Obstructive Pulmonary Disease: R03 subgroup (Drugs for obstructive airway diseases) Diabetes: A10 subgroup (Dugs used in diabetes) Immunological insufficiency: L04 subgroup (Immunosuppressants) or H02 subgroup (Corticosteroid for systemic use) or L01 subgroup (Antineoplastic agents) Thrombolytic therapy following acute myocardial infarction: B01 subgroup (Antithrombotic agents) Vasoactive medication: C01CA/CE subgroup (adrenergic and dopaminergic agents) or H01BA subgroup (Vasopressin and analogues) Dobutamine administration: C01CA07 Highest adrenaline speed: B02BC09 Highest dopamine speed: C01CA04 Highest noradrenaline speed: C01CA24 Administration of phospodiesterase inhibitors: C01CE (Phospodiesterase inhibitors) Continuous intravenous administration of antiarrythmics: C01B (Antiarrhythmics) Administration of arterial medication: All (non-specified) Nutrition - parenteral: B05BA (Solutions for parenteral nutrition) Anticoagulation: B01 (Antithrombotic agents) Antibiotics (IV): J01 (Antibacterials) Comments Depending on the context of use, the code that was actually selected by the user (prescriber, dispenser, etc.) will have the coding.userSelected set to true. As described in the coding datatype: "A coding may be marked as a "userSelected" if a user selected the particular coded value in a user interface (e.g. the user selects an item in a pick-list). If a user selected coding exists, it is the preferred choice for performing translations etc. Data type CodeableConcept Binding A coded concept that defines the type of a medication SNOMED CT Medication Codes (example) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Examples Example of Medication code { "coding": [ { "system": "urn:oid:2.16.840.1.113883.2.4.4.8", "code": "13610554", "display": "Carbasalaatcalcium Sandoz 600 30 sac" } ] } Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD script10.6: coding.code = //element(,MedicationType)/DrugCoded/ProductCode coding.system = //element(,MedicationType)/DrugCoded/ProductCodeQualifier coding.display = //element(,MedicationType)/DrugDescription v2:* RXO-1.1-Requested Give Code.code / RXE-2.1-Give Code.code / RXD-2.1-Dispense/Give Code.code / RXG-4.1-Give Code.code /RXA-5.1-Administered Code.code / RXC-2.1 Component Code rim: .code w5: class NICE-Datadictionary-MDS: https://www.stichting-nice.nl/dd/#57 NICE-Datadictionary-MDS: https://www.stichting-nice.nl/dd/#78 NICE-Datadictionary-MDS: https://www.stichting-nice.nl/dd/#159 NICE-Datadictionary-MDS: https://www.stichting-nice.nl/dd/#411 NICE-Datadictionary-MDS: https://www.stichting-nice.nl/dd/#432 NICE-Datadictionary-SOFA: https://www.stichting-nice.nl/dd/#18 NICE-Datadictionary-SOFA: https://www.stichting-nice.nl/dd/#93 NICE-Datadictionary-SOFA: https://www.stichting-nice.nl/dd/#94 NICE-Datadictionary-SOFA: https://www.stichting-nice.nl/dd/#224 NICE-Datadictionary-SOFA: https://www.stichting-nice.nl/dd/#238 NICE-Datadictionary-Sepsis: https://www.stichting-nice.nl/dd/#740 NICE-Datadictionary-Sepsis: https://www.stichting-nice.nl/dd/#742 NICE-Datadictionary-Sepsis: https://www.stichting-nice.nl/dd/#743 NICE-Datadictionary-Sepsis: https://www.stichting-nice.nl/dd/#744 NICE-Datadictionary-Sepsis: https://www.stichting-nice.nl/dd/#745 NICE-Datadictionary-Capacity: https://www.stichting-nice.nl/dd/#572 NICE-Datadictionary-Capacity: https://www.stichting-nice.nl/dd/#576 NICE-Datadictionary-Capacity: https://www.stichting-nice.nl/dd/#599 NICE-Datadictionary-Capacity: https://www.stichting-nice.nl/dd/#611 NICE-Datadictionary-Capacity: https://www.stichting-nice.nl/dd/#625
id		0..1	string	There are no (further) constraints on this element Element id Medication.code.id Short description xml:id (or equivalent in JSON) Definition unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Medication.code.extension Short description Additional Content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
coding	Σ	0..*	Coding	There are no (further) constraints on this element Element id Medication.code.coding Short description MedicationCode Alternate names ProductCode, Geneesmiddel code Definition Coding medication in the Netherlands is done on the basis of the G standard (issued by Z-index), which is filled under the direction of KNMP. The coded medication can be expressed as: GTIN International Article Number KNMP article number = ATKODE (2.16.840.1.113883.2.4.4.8) Trade product code (HPK) Prescription code (PRK) Generic product code (GPK) Anatomic Therapeutic Classification code (ATC) SNOMED CT code Substance Name Code (SNK) Substance Name Code, in combination with Route of Administration (SSK) 90.000.000 number (individual code setting) (or similar from the facility) The GTIN enables identification of the product including its origin with a barcode. The ATKODE is the number with which wholesalers link the article to pharmacy systems (e.g. a box with 3 strips of 10 tablets). The HPK is the code for the trade product (with the brand name) as used per dose/per time the medication is taken (1 pill, 1 puff, 1ml) The PRK codes for the same product as the HPK does, but is not linked to a manufacturer (no brand name, no characteristics such as color, geometrical shape etc.). This code will enable a generic prescription, while still defining which trade product can be taken (e.g. a 200ml bag). The generic product code defines the composition of a product, and is sufficient for recording the prescription, but not the order. The prescription code (PRK) was developed and added to the older generic (GPK) and supplier-specific (HPK, ATKODE) coding to enable a generic product to be entered without listing a specific brand on the one hand, and to enable providing enough information to support the pharmacy supplying it on the other. The Substance Name Code (SNK) and the Substance Name Code, in combination with Route of Administration (SSK) are used to prescribe at a more generic level. The GTIN coding is used for the implementation of a barcode scanning standard and to be able to trace the origin of the product. The 90.000.000 number is used in accordance with national agreements. Requirements Allows for translations and alternate encodings within a code system. Also supports communication of the same instance to systems requiring different encodings. Comments It is possible to capture multiple product codes with .coding elements. These product codes need to be related to each other. It should not be possible that two different product codes result in two medication products: only more generic product codes are allowed next to the original product code. Data type Coding Sliced: Unordered, Open, by system(Value) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim: CV orim: fhir:Coding rdfs:subClassOf dt:CDCoding v2: CE.1-8, CE.10-22 rim: union(., ./translation) orim: fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding hcim-pharmaceuticalproduct-v2.0-2017EN: NL-CM:9.7.19927
productCodeZICodelijst	Σ	0..1	CodingBinding	There are no (further) constraints on this element Element id Medication.code.coding:productCodeZICodelijst Short description Code defined by a terminology system Definition A reference to a code defined by a terminology system. Requirements Allows for translations and alternate encodings within a code system. Also supports communication of the same instance to systems requiring different encodings. Comments Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. Data type Coding Binding ProductCodeZICodelijst ProductCodeZICodelijst (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim: CV orim: fhir:Coding rdfs:subClassOf dt:CDCoding v2: CE.1-8, CE.10-22 rim: union(., ./translation) orim: fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
id		0..1	string	There are no (further) constraints on this element Element id Medication.code.coding:productCodeZICodelijst.id Short description xml:id (or equivalent in JSON) Definition unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Medication.code.coding:productCodeZICodelijst.extension Short description Additional Content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
system	Σ	1..1	uriFixed Value	There are no (further) constraints on this element Element id Medication.code.coding:productCodeZICodelijst.system Short description Identity of the terminology system Definition The identification of the code system that defines the meaning of the symbol in the code. Requirements Need to be unambiguous about the source of the definition of the symbol. Comments The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Fixed value urn:oid:2.16.840.1.113883.2.4.4.8 Mappings rim: n/a v2: CE.3 rim:* ./codeSystem orim: fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem
version	Σ	0..1	string	There are no (further) constraints on this element Element id Medication.code.coding:productCodeZICodelijst.version Short description Version of the system - if relevant Definition The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured. and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged. Comments Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.7 rim:* ./codeSystemVersion orim: fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion
code	Σ	0..1	code	There are no (further) constraints on this element Element id Medication.code.coding:productCodeZICodelijst.code Short description Symbol in syntax defined by the system Definition A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination). Requirements Need to refer to a particular code in the system. Comments Note that FHIR strings may not exceed 1MB in size Data type code Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.1 rim:* ./code orim: fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code
display	Σ	0..1	string	There are no (further) constraints on this element Element id Medication.code.coding:productCodeZICodelijst.display Short description Representation defined by the system Definition A representation of the meaning of the code in the system, following the rules of the system. Requirements Need to be able to carry a human-readable meaning of the code for readers that do not know the system. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.2 - but note this is not well followed rim:* CV.displayName orim: fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName
userSelected	Σ	0..1	boolean	There are no (further) constraints on this element Element id Medication.code.coding:productCodeZICodelijst.userSelected Short description If this coding was chosen directly by the user Definition Indicates that this coding was chosen by a user directly - i.e. off a pick list of available items (codes or displays). Requirements This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing. Comments Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely. Data type boolean Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: Sometimes implied by being first rim: CD.codingRationale orim: fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]
productCodeHPKCodelijst	Σ	0..1	CodingBinding	There are no (further) constraints on this element Element id Medication.code.coding:productCodeHPKCodelijst Short description Code defined by a terminology system Definition A reference to a code defined by a terminology system. Requirements Allows for translations and alternate encodings within a code system. Also supports communication of the same instance to systems requiring different encodings. Comments Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. Data type Coding Binding ProductCodeHPKCodelijst ProductCodeHPKCodelijst (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim: CV orim: fhir:Coding rdfs:subClassOf dt:CDCoding v2: CE.1-8, CE.10-22 rim: union(., ./translation) orim: fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
id		0..1	string	There are no (further) constraints on this element Element id Medication.code.coding:productCodeHPKCodelijst.id Short description xml:id (or equivalent in JSON) Definition unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Medication.code.coding:productCodeHPKCodelijst.extension Short description Additional Content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
system	Σ	1..1	uriFixed Value	There are no (further) constraints on this element Element id Medication.code.coding:productCodeHPKCodelijst.system Short description Identity of the terminology system Definition The identification of the code system that defines the meaning of the symbol in the code. Requirements Need to be unambiguous about the source of the definition of the symbol. Comments The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Fixed value urn:oid:2.16.840.1.113883.2.4.4.7 Mappings rim: n/a v2: CE.3 rim:* ./codeSystem orim: fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem
version	Σ	0..1	string	There are no (further) constraints on this element Element id Medication.code.coding:productCodeHPKCodelijst.version Short description Version of the system - if relevant Definition The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured. and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged. Comments Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.7 rim:* ./codeSystemVersion orim: fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion
code	Σ	0..1	code	There are no (further) constraints on this element Element id Medication.code.coding:productCodeHPKCodelijst.code Short description Symbol in syntax defined by the system Definition A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination). Requirements Need to refer to a particular code in the system. Comments Note that FHIR strings may not exceed 1MB in size Data type code Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.1 rim:* ./code orim: fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code
display	Σ	0..1	string	There are no (further) constraints on this element Element id Medication.code.coding:productCodeHPKCodelijst.display Short description Representation defined by the system Definition A representation of the meaning of the code in the system, following the rules of the system. Requirements Need to be able to carry a human-readable meaning of the code for readers that do not know the system. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.2 - but note this is not well followed rim:* CV.displayName orim: fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName
userSelected	Σ	0..1	boolean	There are no (further) constraints on this element Element id Medication.code.coding:productCodeHPKCodelijst.userSelected Short description If this coding was chosen directly by the user Definition Indicates that this coding was chosen by a user directly - i.e. off a pick list of available items (codes or displays). Requirements This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing. Comments Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely. Data type boolean Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: Sometimes implied by being first rim: CD.codingRationale orim: fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]
productCodeGTINCodelijst	Σ	0..1	CodingBinding	There are no (further) constraints on this element Element id Medication.code.coding:productCodeGTINCodelijst Short description Code defined by a terminology system Definition A reference to a code defined by a terminology system. Requirements Allows for translations and alternate encodings within a code system. Also supports communication of the same instance to systems requiring different encodings. Comments Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. Data type Coding Binding ProductCodeGTINCodelijst ProductCodeGTINCodelijst (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim: CV orim: fhir:Coding rdfs:subClassOf dt:CDCoding v2: CE.1-8, CE.10-22 rim: union(., ./translation) orim: fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
id		0..1	string	There are no (further) constraints on this element Element id Medication.code.coding:productCodeGTINCodelijst.id Short description xml:id (or equivalent in JSON) Definition unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Medication.code.coding:productCodeGTINCodelijst.extension Short description Additional Content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
system	Σ	1..1	uriFixed Value	There are no (further) constraints on this element Element id Medication.code.coding:productCodeGTINCodelijst.system Short description Identity of the terminology system Definition The identification of the code system that defines the meaning of the symbol in the code. Requirements Need to be unambiguous about the source of the definition of the symbol. Comments The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Fixed value urn:oid:1.3.160 Mappings rim: n/a v2: CE.3 rim:* ./codeSystem orim: fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem
version	Σ	0..1	string	There are no (further) constraints on this element Element id Medication.code.coding:productCodeGTINCodelijst.version Short description Version of the system - if relevant Definition The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured. and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged. Comments Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.7 rim:* ./codeSystemVersion orim: fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion
code	Σ	0..1	code	There are no (further) constraints on this element Element id Medication.code.coding:productCodeGTINCodelijst.code Short description Symbol in syntax defined by the system Definition A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination). Requirements Need to refer to a particular code in the system. Comments Note that FHIR strings may not exceed 1MB in size Data type code Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.1 rim:* ./code orim: fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code
display	Σ	0..1	string	There are no (further) constraints on this element Element id Medication.code.coding:productCodeGTINCodelijst.display Short description Representation defined by the system Definition A representation of the meaning of the code in the system, following the rules of the system. Requirements Need to be able to carry a human-readable meaning of the code for readers that do not know the system. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.2 - but note this is not well followed rim:* CV.displayName orim: fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName
userSelected	Σ	0..1	boolean	There are no (further) constraints on this element Element id Medication.code.coding:productCodeGTINCodelijst.userSelected Short description If this coding was chosen directly by the user Definition Indicates that this coding was chosen by a user directly - i.e. off a pick list of available items (codes or displays). Requirements This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing. Comments Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely. Data type boolean Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: Sometimes implied by being first rim: CD.codingRationale orim: fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]
productCodeGPKCodelijst	Σ	0..1	CodingBinding	There are no (further) constraints on this element Element id Medication.code.coding:productCodeGPKCodelijst Short description Code defined by a terminology system Definition A reference to a code defined by a terminology system. Requirements Allows for translations and alternate encodings within a code system. Also supports communication of the same instance to systems requiring different encodings. Comments Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. Data type Coding Binding ProductCodeGPKCodelijst ProductCodeGPKCodelijst (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim: CV orim: fhir:Coding rdfs:subClassOf dt:CDCoding v2: CE.1-8, CE.10-22 rim: union(., ./translation) orim: fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
id		0..1	string	There are no (further) constraints on this element Element id Medication.code.coding:productCodeGPKCodelijst.id Short description xml:id (or equivalent in JSON) Definition unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Medication.code.coding:productCodeGPKCodelijst.extension Short description Additional Content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
system	Σ	1..1	uriFixed Value	There are no (further) constraints on this element Element id Medication.code.coding:productCodeGPKCodelijst.system Short description Identity of the terminology system Definition The identification of the code system that defines the meaning of the symbol in the code. Requirements Need to be unambiguous about the source of the definition of the symbol. Comments The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Fixed value urn:oid:2.16.840.1.113883.2.4.4.1 Mappings rim: n/a v2: CE.3 rim:* ./codeSystem orim: fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem
version	Σ	0..1	string	There are no (further) constraints on this element Element id Medication.code.coding:productCodeGPKCodelijst.version Short description Version of the system - if relevant Definition The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured. and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged. Comments Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.7 rim:* ./codeSystemVersion orim: fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion
code	Σ	0..1	code	There are no (further) constraints on this element Element id Medication.code.coding:productCodeGPKCodelijst.code Short description Symbol in syntax defined by the system Definition A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination). Requirements Need to refer to a particular code in the system. Comments Note that FHIR strings may not exceed 1MB in size Data type code Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.1 rim:* ./code orim: fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code
display	Σ	0..1	string	There are no (further) constraints on this element Element id Medication.code.coding:productCodeGPKCodelijst.display Short description Representation defined by the system Definition A representation of the meaning of the code in the system, following the rules of the system. Requirements Need to be able to carry a human-readable meaning of the code for readers that do not know the system. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.2 - but note this is not well followed rim:* CV.displayName orim: fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName
userSelected	Σ	0..1	boolean	There are no (further) constraints on this element Element id Medication.code.coding:productCodeGPKCodelijst.userSelected Short description If this coding was chosen directly by the user Definition Indicates that this coding was chosen by a user directly - i.e. off a pick list of available items (codes or displays). Requirements This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing. Comments Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely. Data type boolean Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: Sometimes implied by being first rim: CD.codingRationale orim: fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]
productCodePRKCodelijst	Σ	0..1	CodingBinding	There are no (further) constraints on this element Element id Medication.code.coding:productCodePRKCodelijst Short description Code defined by a terminology system Definition A reference to a code defined by a terminology system. Requirements Allows for translations and alternate encodings within a code system. Also supports communication of the same instance to systems requiring different encodings. Comments Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. Data type Coding Binding ProductCodePRKCodelijst ProductCodePRKCodelijst (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim: CV orim: fhir:Coding rdfs:subClassOf dt:CDCoding v2: CE.1-8, CE.10-22 rim: union(., ./translation) orim: fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
id		0..1	string	There are no (further) constraints on this element Element id Medication.code.coding:productCodePRKCodelijst.id Short description xml:id (or equivalent in JSON) Definition unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Medication.code.coding:productCodePRKCodelijst.extension Short description Additional Content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
system	Σ	1..1	uriFixed Value	There are no (further) constraints on this element Element id Medication.code.coding:productCodePRKCodelijst.system Short description Identity of the terminology system Definition The identification of the code system that defines the meaning of the symbol in the code. Requirements Need to be unambiguous about the source of the definition of the symbol. Comments The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Fixed value urn:oid:2.16.840.1.113883.2.4.4.10 Mappings rim: n/a v2: CE.3 rim:* ./codeSystem orim: fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem
version	Σ	0..1	string	There are no (further) constraints on this element Element id Medication.code.coding:productCodePRKCodelijst.version Short description Version of the system - if relevant Definition The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured. and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged. Comments Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.7 rim:* ./codeSystemVersion orim: fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion
code	Σ	0..1	code	There are no (further) constraints on this element Element id Medication.code.coding:productCodePRKCodelijst.code Short description Symbol in syntax defined by the system Definition A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination). Requirements Need to refer to a particular code in the system. Comments Note that FHIR strings may not exceed 1MB in size Data type code Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.1 rim:* ./code orim: fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code
display	Σ	0..1	string	There are no (further) constraints on this element Element id Medication.code.coding:productCodePRKCodelijst.display Short description Representation defined by the system Definition A representation of the meaning of the code in the system, following the rules of the system. Requirements Need to be able to carry a human-readable meaning of the code for readers that do not know the system. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.2 - but note this is not well followed rim:* CV.displayName orim: fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName
userSelected	Σ	0..1	boolean	There are no (further) constraints on this element Element id Medication.code.coding:productCodePRKCodelijst.userSelected Short description If this coding was chosen directly by the user Definition Indicates that this coding was chosen by a user directly - i.e. off a pick list of available items (codes or displays). Requirements This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing. Comments Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely. Data type boolean Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: Sometimes implied by being first rim: CD.codingRationale orim: fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]
productCodeATCCodelijst	S Σ	1..1	CodingBinding	There are no (further) constraints on this element Element id Medication.code.coding:productCodeATCCodelijst Short description Code defined by a terminology system Definition A reference to a code defined by a terminology system. Requirements Allows for translations and alternate encodings within a code system. Also supports communication of the same instance to systems requiring different encodings. Comments Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. Data type Coding Binding ProductCodeATCCodelijst ProductCodeATCCodelijst (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim: CV orim: fhir:Coding rdfs:subClassOf dt:CDCoding v2: CE.1-8, CE.10-22 rim: union(., ./translation) orim: fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
id		0..1	string	There are no (further) constraints on this element Element id Medication.code.coding:productCodeATCCodelijst.id Short description xml:id (or equivalent in JSON) Definition unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Medication.code.coding:productCodeATCCodelijst.extension Short description Additional Content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
system	Σ	1..1	uriFixed Value	There are no (further) constraints on this element Element id Medication.code.coding:productCodeATCCodelijst.system Short description Identity of the terminology system Definition The identification of the code system that defines the meaning of the symbol in the code. Requirements Need to be unambiguous about the source of the definition of the symbol. Comments The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Fixed value http://www.whocc.no/atc Mappings rim: n/a v2: CE.3 rim:* ./codeSystem orim: fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem
version	Σ	0..1	string	There are no (further) constraints on this element Element id Medication.code.coding:productCodeATCCodelijst.version Short description Version of the system - if relevant Definition The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured. and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged. Comments Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.7 rim:* ./codeSystemVersion orim: fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion
code	Σ	0..1	code	There are no (further) constraints on this element Element id Medication.code.coding:productCodeATCCodelijst.code Short description Symbol in syntax defined by the system Definition A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination). Requirements Need to refer to a particular code in the system. Comments Note that FHIR strings may not exceed 1MB in size Data type code Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.1 rim:* ./code orim: fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code
display	Σ	0..1	string	There are no (further) constraints on this element Element id Medication.code.coding:productCodeATCCodelijst.display Short description Representation defined by the system Definition A representation of the meaning of the code in the system, following the rules of the system. Requirements Need to be able to carry a human-readable meaning of the code for readers that do not know the system. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.2 - but note this is not well followed rim:* CV.displayName orim: fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName
userSelected	Σ	0..1	boolean	There are no (further) constraints on this element Element id Medication.code.coding:productCodeATCCodelijst.userSelected Short description If this coding was chosen directly by the user Definition Indicates that this coding was chosen by a user directly - i.e. off a pick list of available items (codes or displays). Requirements This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing. Comments Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely. Data type boolean Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: Sometimes implied by being first rim: CD.codingRationale orim: fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]
text	Σ	0..1	string	There are no (further) constraints on this element Element id Medication.code.text Short description Medication Alternate names ProductNaam, Geneesmiddel Definition There is no code for medication entered in free text. In these cases, enter the complete description. Requirements The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source. Comments Very often the text is the same as a displayName of one of the codings. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Examples Example of Medication as free text PARACETAMOL 500MG TABLET Mappings rim: n/a v2: CE.9. But note many systems use CE.2 for this rim: ./originalText[mediaType/code="text/plain"]/data orim: fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText hcim-pharmaceuticalproduct-v2.0-2017EN: NL-CM:9.7.19929
status	Σ	0..1	codeBinding	There are no (further) constraints on this element Element id Medication.status Short description active \| inactive \| entered-in-error Definition A code to indicate if the medication is in active use. Comments This status is not intended to specify if a medication is part of a formulary. Data type code Binding A coded concept defining if the medication is in active use MedicationStatus (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a rim: .statusCode
isBrand	Σ	0..1	boolean	There are no (further) constraints on this element Element id Medication.isBrand Short description True if a brand Definition Set to true if the item is attributable to a specific manufacturer. Data type boolean Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a script10.6: no mapping rim: true if .player.scopingRole[typeCode=MANU] exists w5: class
isOverTheCounter	Σ	0..1	boolean	There are no (further) constraints on this element Element id Medication.isOverTheCounter Short description True if medication does not require a prescription Definition Set to true if the medication can be obtained without an order from a prescriber. Data type boolean Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a rim: NA w5: class
manufacturer	Σ I	0..1	Reference(Organization)	There are no (further) constraints on this element Element id Medication.manufacturer Short description Manufacturer of the item Definition Describes the details of the manufacturer of the medication product. This is not intended to represent the distributor of a medication product. Comments References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository. Data type Reference(Organization) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %resource.contained.id.trace('ids'))` Mappings rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity) script10.6: no mapping v2: RXD-20-Substance Manufacturer Name / RXG-21-Substance Manufacturer Name / RXA-17-Substance Manufacturer Name rim: .player.scopingRole[typeCode=MANU].scoper w5: who.actor
form		0..1	CodeableConceptBinding	There are no (further) constraints on this element Element id Medication.form Short description PharmaceuticalForm Alternate names FarmaceutischeVorm Definition The pharmaceutical form indicates the form of the medication in accordance with the route of administration. Examples include: tablet, suppository, infusion liquid, ointment. If the product has a generic code in the G standard, the form will be known in the G standard. For products without a code (free text, preparation by the pharmacy), the means of administration can be entered. Comments When Medication is referenced from MedicationRequest, this is the ordered form. When Medication is referenced within MedicationDispense, this is the dispensed form. When Medication is referenced within MedicationAdministration, this is administered form. Data type CodeableConcept Binding FarmaceutischeVormCodelijst FarmaceutischeVormCodelijst (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Examples Example of Pharmaceutical form { "coding": [ { "system": "urn:oid:2.16.840.1.113883.2.4.4.11", "code": "230", "display": "TABLET" } ] } Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD script10.6: coding.code = //element(,DrugCodedType)/FormCode coding.system = //element(,DrugCodedType)/FormSourceCode v2: RXO-5-Requested Dosage Form / RXE-6-Give Dosage Form / RXD-6-Actual Dosage Form / RXG-8-Give Dosage Form / RXA-8-Administered Dosage Form rim: .formCode hcim-pharmaceuticalproduct-v2.0-2017EN: NL-CM:9.7.19931
ingredient		0..*	BackboneElement	There are no (further) constraints on this element Element id Medication.ingredient Short description Ingredient Alternate names Ingredient Definition Container of the Ingredient concept. This container contains all data elements of the Ingredient concept. A product contains one or more active substances and excipients. These are usually determined by the product code. For medication prepared or compounded by the local pharmacy, each ingredient must be entered separately. The active substances play an important role, as they: a) determine the pharmacotherapeutic effect of the medication and b) serve as the basis for the indication of the strength of the medication (e.g. 200mg). Comments The ingredients need not be a complete list. If an ingredient is not specified, this does not indicate whether an ingredient is present or absent. If an ingredient is specified it does not mean that all ingredients are specified. It is possible to specify both inactive and active ingredients. If the Medication.code does not fully specify the Medication (i.e. own preparation), all known ingredients by the source system must be conveyed. Data type BackboneElement Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a rim: .scopesRole[typeCode=INGR] hcim-pharmaceuticalproduct-v2.0-2017EN: NL-CM:9.7.19932
id		0..1	string	There are no (further) constraints on this element Element id Medication.ingredient.id Short description xml:id (or equivalent in JSON) Definition unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Medication.ingredient.extension Short description Additional Content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id Medication.ingredient.modifierExtension Short description Extensions that cannot be ignored Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
itemCodeableConcept		1..1	CodeableConcept	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept Short description Substance Alternate names IngredientCode Definition Active substance or excipient. Here, the same codes can be used as for the ProductCode (for dilutions and compounds in particular), but now, the ATC, SSK and SNK codes can also be used to indicate a substance (to list ingredients of local products prepared by the pharmacy). GTIN International Article Number KNMP article number Trade product code (HPK) Prescription code (PRK) Generic product code (GPK) ATC (anatomic therapeutic classification) SSK (substance name code with route of administration) SNK (substance name code) The ATC is an international classification of pharmaceutical substances without a reference to specific products on the market. Therefore, the ATC code of a generic product will not contain a reference to a certain dose, pharmaceutical form or route of administration; it will only contain a reference to the ingredients (not the amount/concentration/strength). Data type CodeableConcept Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Examples Example of Ingredient substance { "coding": [ { "system": "http://www.whocc.no/atc", "code": "B01AC08", "display": "carbasalate calcium" } ] } Mappings rim: n/a script10.6: coding.code = //element(,MedicationType)/DrugCoded/ProductCode coding.system = //element(,MedicationType)/DrugCoded/ProductCodeQualifier coding.display = //element(,MedicationType)/DrugDescription v2:* RXC-2-Component Code if medication: RXO-1-Requested Give Code / RXE-2-Give Code / RXD-2-Dispense/Give Code / RXG-4-Give Code / RXA-5-Administered Code rim: .player hcim-pharmaceuticalproduct-v2.0-2017EN: NL-CM:9.7.19934
id		0..1	string	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.id Short description xml:id (or equivalent in JSON) Definition unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.extension Short description Additional Content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
coding	Σ	0..*	Coding	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding Short description Code defined by a terminology system Definition A reference to a code defined by a terminology system. Requirements Allows for translations and alternate encodings within a code system. Also supports communication of the same instance to systems requiring different encodings. Comments Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. Data type Coding Sliced: Unordered, Open, by system(Value) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim: CV orim: fhir:Coding rdfs:subClassOf dt:CDCoding v2: CE.1-8, CE.10-22 rim: union(., ./translation) orim: fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
ingredientCodeZICodelijst	Σ	0..*	CodingBinding	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeZICodelijst Short description Code defined by a terminology system Definition A reference to a code defined by a terminology system. Requirements Allows for translations and alternate encodings within a code system. Also supports communication of the same instance to systems requiring different encodings. Comments Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. Data type Coding Binding IngredientCodeZICodelijst IngredientCodeZICodelijst (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim: CV orim: fhir:Coding rdfs:subClassOf dt:CDCoding v2: CE.1-8, CE.10-22 rim: union(., ./translation) orim: fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
id		0..1	string	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeZICodelijst.id Short description xml:id (or equivalent in JSON) Definition unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeZICodelijst.extension Short description Additional Content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
system	Σ	1..1	uriFixed Value	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeZICodelijst.system Short description Identity of the terminology system Definition The identification of the code system that defines the meaning of the symbol in the code. Requirements Need to be unambiguous about the source of the definition of the symbol. Comments The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Fixed value urn:oid:2.16.840.1.113883.2.4.4.8 Mappings rim: n/a v2: CE.3 rim:* ./codeSystem orim: fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem
version	Σ	0..1	string	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeZICodelijst.version Short description Version of the system - if relevant Definition The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured. and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged. Comments Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.7 rim:* ./codeSystemVersion orim: fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion
code	Σ	0..1	code	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeZICodelijst.code Short description Symbol in syntax defined by the system Definition A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination). Requirements Need to refer to a particular code in the system. Comments Note that FHIR strings may not exceed 1MB in size Data type code Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.1 rim:* ./code orim: fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code
display	Σ	0..1	string	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeZICodelijst.display Short description Representation defined by the system Definition A representation of the meaning of the code in the system, following the rules of the system. Requirements Need to be able to carry a human-readable meaning of the code for readers that do not know the system. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.2 - but note this is not well followed rim:* CV.displayName orim: fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName
userSelected	Σ	0..1	boolean	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeZICodelijst.userSelected Short description If this coding was chosen directly by the user Definition Indicates that this coding was chosen by a user directly - i.e. off a pick list of available items (codes or displays). Requirements This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing. Comments Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely. Data type boolean Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: Sometimes implied by being first rim: CD.codingRationale orim: fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]
ingredientCodeGTINCodeLijst	Σ	0..*	CodingBinding	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeGTINCodeLijst Short description Code defined by a terminology system Definition A reference to a code defined by a terminology system. Requirements Allows for translations and alternate encodings within a code system. Also supports communication of the same instance to systems requiring different encodings. Comments Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. Data type Coding Binding IngredientCodeGTINCodeLijst IngredientCodeGTINCodeLijst (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim: CV orim: fhir:Coding rdfs:subClassOf dt:CDCoding v2: CE.1-8, CE.10-22 rim: union(., ./translation) orim: fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
id		0..1	string	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeGTINCodeLijst.id Short description xml:id (or equivalent in JSON) Definition unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeGTINCodeLijst.extension Short description Additional Content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
system	Σ	1..1	uriFixed Value	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeGTINCodeLijst.system Short description Identity of the terminology system Definition The identification of the code system that defines the meaning of the symbol in the code. Requirements Need to be unambiguous about the source of the definition of the symbol. Comments The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Fixed value urn:oid:1.3.160 Mappings rim: n/a v2: CE.3 rim:* ./codeSystem orim: fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem
version	Σ	0..1	string	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeGTINCodeLijst.version Short description Version of the system - if relevant Definition The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured. and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged. Comments Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.7 rim:* ./codeSystemVersion orim: fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion
code	Σ	0..1	code	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeGTINCodeLijst.code Short description Symbol in syntax defined by the system Definition A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination). Requirements Need to refer to a particular code in the system. Comments Note that FHIR strings may not exceed 1MB in size Data type code Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.1 rim:* ./code orim: fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code
display	Σ	0..1	string	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeGTINCodeLijst.display Short description Representation defined by the system Definition A representation of the meaning of the code in the system, following the rules of the system. Requirements Need to be able to carry a human-readable meaning of the code for readers that do not know the system. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.2 - but note this is not well followed rim:* CV.displayName orim: fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName
userSelected	Σ	0..1	boolean	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeGTINCodeLijst.userSelected Short description If this coding was chosen directly by the user Definition Indicates that this coding was chosen by a user directly - i.e. off a pick list of available items (codes or displays). Requirements This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing. Comments Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely. Data type boolean Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: Sometimes implied by being first rim: CD.codingRationale orim: fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]
ingredientCodeATCCodelijst	Σ	0..*	CodingBinding	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeATCCodelijst Short description Code defined by a terminology system Definition A reference to a code defined by a terminology system. Requirements Allows for translations and alternate encodings within a code system. Also supports communication of the same instance to systems requiring different encodings. Comments Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. Data type Coding Binding IngredientCodeATCCodelijst IngredientCodeATCCodelijst (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim: CV orim: fhir:Coding rdfs:subClassOf dt:CDCoding v2: CE.1-8, CE.10-22 rim: union(., ./translation) orim: fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
id		0..1	string	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeATCCodelijst.id Short description xml:id (or equivalent in JSON) Definition unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeATCCodelijst.extension Short description Additional Content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
system	Σ	1..1	uriFixed Value	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeATCCodelijst.system Short description Identity of the terminology system Definition The identification of the code system that defines the meaning of the symbol in the code. Requirements Need to be unambiguous about the source of the definition of the symbol. Comments The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Fixed value http://www.whocc.no/atc Mappings rim: n/a v2: CE.3 rim:* ./codeSystem orim: fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem
version	Σ	0..1	string	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeATCCodelijst.version Short description Version of the system - if relevant Definition The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured. and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged. Comments Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.7 rim:* ./codeSystemVersion orim: fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion
code	Σ	0..1	code	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeATCCodelijst.code Short description Symbol in syntax defined by the system Definition A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination). Requirements Need to refer to a particular code in the system. Comments Note that FHIR strings may not exceed 1MB in size Data type code Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.1 rim:* ./code orim: fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code
display	Σ	0..1	string	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeATCCodelijst.display Short description Representation defined by the system Definition A representation of the meaning of the code in the system, following the rules of the system. Requirements Need to be able to carry a human-readable meaning of the code for readers that do not know the system. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.2 - but note this is not well followed rim:* CV.displayName orim: fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName
userSelected	Σ	0..1	boolean	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeATCCodelijst.userSelected Short description If this coding was chosen directly by the user Definition Indicates that this coding was chosen by a user directly - i.e. off a pick list of available items (codes or displays). Requirements This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing. Comments Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely. Data type boolean Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: Sometimes implied by being first rim: CD.codingRationale orim: fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]
ingredientCodeHPKLijst	Σ	0..*	CodingBinding	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeHPKLijst Short description Code defined by a terminology system Definition A reference to a code defined by a terminology system. Requirements Allows for translations and alternate encodings within a code system. Also supports communication of the same instance to systems requiring different encodings. Comments Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. Data type Coding Binding IngredientCodeHPKLijst IngredientCodeHPKLijst (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim: CV orim: fhir:Coding rdfs:subClassOf dt:CDCoding v2: CE.1-8, CE.10-22 rim: union(., ./translation) orim: fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
id		0..1	string	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeHPKLijst.id Short description xml:id (or equivalent in JSON) Definition unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeHPKLijst.extension Short description Additional Content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
system	Σ	1..1	uriFixed Value	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeHPKLijst.system Short description Identity of the terminology system Definition The identification of the code system that defines the meaning of the symbol in the code. Requirements Need to be unambiguous about the source of the definition of the symbol. Comments The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Fixed value urn:oid:2.16.840.1.113883.2.4.4.7 Mappings rim: n/a v2: CE.3 rim:* ./codeSystem orim: fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem
version	Σ	0..1	string	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeHPKLijst.version Short description Version of the system - if relevant Definition The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured. and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged. Comments Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.7 rim:* ./codeSystemVersion orim: fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion
code	Σ	0..1	code	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeHPKLijst.code Short description Symbol in syntax defined by the system Definition A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination). Requirements Need to refer to a particular code in the system. Comments Note that FHIR strings may not exceed 1MB in size Data type code Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.1 rim:* ./code orim: fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code
display	Σ	0..1	string	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeHPKLijst.display Short description Representation defined by the system Definition A representation of the meaning of the code in the system, following the rules of the system. Requirements Need to be able to carry a human-readable meaning of the code for readers that do not know the system. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.2 - but note this is not well followed rim:* CV.displayName orim: fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName
userSelected	Σ	0..1	boolean	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeHPKLijst.userSelected Short description If this coding was chosen directly by the user Definition Indicates that this coding was chosen by a user directly - i.e. off a pick list of available items (codes or displays). Requirements This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing. Comments Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely. Data type boolean Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: Sometimes implied by being first rim: CD.codingRationale orim: fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]
ingredientCodeGPKLijst	Σ	0..*	CodingBinding	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeGPKLijst Short description Code defined by a terminology system Definition A reference to a code defined by a terminology system. Requirements Allows for translations and alternate encodings within a code system. Also supports communication of the same instance to systems requiring different encodings. Comments Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. Data type Coding Binding IngredientCodeGPKLijst IngredientCodeGPKLijst (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim: CV orim: fhir:Coding rdfs:subClassOf dt:CDCoding v2: CE.1-8, CE.10-22 rim: union(., ./translation) orim: fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
id		0..1	string	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeGPKLijst.id Short description xml:id (or equivalent in JSON) Definition unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeGPKLijst.extension Short description Additional Content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
system	Σ	1..1	uriFixed Value	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeGPKLijst.system Short description Identity of the terminology system Definition The identification of the code system that defines the meaning of the symbol in the code. Requirements Need to be unambiguous about the source of the definition of the symbol. Comments The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Fixed value urn:oid:2.16.840.1.113883.2.4.4.1 Mappings rim: n/a v2: CE.3 rim:* ./codeSystem orim: fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem
version	Σ	0..1	string	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeGPKLijst.version Short description Version of the system - if relevant Definition The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured. and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged. Comments Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.7 rim:* ./codeSystemVersion orim: fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion
code	Σ	0..1	code	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeGPKLijst.code Short description Symbol in syntax defined by the system Definition A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination). Requirements Need to refer to a particular code in the system. Comments Note that FHIR strings may not exceed 1MB in size Data type code Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.1 rim:* ./code orim: fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code
display	Σ	0..1	string	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeGPKLijst.display Short description Representation defined by the system Definition A representation of the meaning of the code in the system, following the rules of the system. Requirements Need to be able to carry a human-readable meaning of the code for readers that do not know the system. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.2 - but note this is not well followed rim:* CV.displayName orim: fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName
userSelected	Σ	0..1	boolean	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeGPKLijst.userSelected Short description If this coding was chosen directly by the user Definition Indicates that this coding was chosen by a user directly - i.e. off a pick list of available items (codes or displays). Requirements This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing. Comments Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely. Data type boolean Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: Sometimes implied by being first rim: CD.codingRationale orim: fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]
ingredientCodeSNKLijst	Σ	0..*	CodingBinding	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeSNKLijst Short description Code defined by a terminology system Definition A reference to a code defined by a terminology system. Requirements Allows for translations and alternate encodings within a code system. Also supports communication of the same instance to systems requiring different encodings. Comments Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. Data type Coding Binding IngredientCodeSNKLijst IngredientCodeSNKLijst (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim: CV orim: fhir:Coding rdfs:subClassOf dt:CDCoding v2: CE.1-8, CE.10-22 rim: union(., ./translation) orim: fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
id		0..1	string	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeSNKLijst.id Short description xml:id (or equivalent in JSON) Definition unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeSNKLijst.extension Short description Additional Content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
system	Σ	1..1	uriFixed Value	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeSNKLijst.system Short description Identity of the terminology system Definition The identification of the code system that defines the meaning of the symbol in the code. Requirements Need to be unambiguous about the source of the definition of the symbol. Comments The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Fixed value urn:oid:2.16.840.1.113883.2.4.4.1.750 Mappings rim: n/a v2: CE.3 rim:* ./codeSystem orim: fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem
version	Σ	0..1	string	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeSNKLijst.version Short description Version of the system - if relevant Definition The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured. and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged. Comments Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.7 rim:* ./codeSystemVersion orim: fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion
code	Σ	0..1	code	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeSNKLijst.code Short description Symbol in syntax defined by the system Definition A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination). Requirements Need to refer to a particular code in the system. Comments Note that FHIR strings may not exceed 1MB in size Data type code Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.1 rim:* ./code orim: fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code
display	Σ	0..1	string	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeSNKLijst.display Short description Representation defined by the system Definition A representation of the meaning of the code in the system, following the rules of the system. Requirements Need to be able to carry a human-readable meaning of the code for readers that do not know the system. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.2 - but note this is not well followed rim:* CV.displayName orim: fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName
userSelected	Σ	0..1	boolean	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeSNKLijst.userSelected Short description If this coding was chosen directly by the user Definition Indicates that this coding was chosen by a user directly - i.e. off a pick list of available items (codes or displays). Requirements This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing. Comments Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely. Data type boolean Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: Sometimes implied by being first rim: CD.codingRationale orim: fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]
ingredientCodePRKLijst	Σ	0..*	CodingBinding	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodePRKLijst Short description Code defined by a terminology system Definition A reference to a code defined by a terminology system. Requirements Allows for translations and alternate encodings within a code system. Also supports communication of the same instance to systems requiring different encodings. Comments Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. Data type Coding Binding IngredientCodePRKLijst IngredientCodePRKLijst (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim: CV orim: fhir:Coding rdfs:subClassOf dt:CDCoding v2: CE.1-8, CE.10-22 rim: union(., ./translation) orim: fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
id		0..1	string	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodePRKLijst.id Short description xml:id (or equivalent in JSON) Definition unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodePRKLijst.extension Short description Additional Content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
system	Σ	1..1	uriFixed Value	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodePRKLijst.system Short description Identity of the terminology system Definition The identification of the code system that defines the meaning of the symbol in the code. Requirements Need to be unambiguous about the source of the definition of the symbol. Comments The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Fixed value urn:oid:2.16.840.1.113883.2.4.4.10 Mappings rim: n/a v2: CE.3 rim:* ./codeSystem orim: fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem
version	Σ	0..1	string	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodePRKLijst.version Short description Version of the system - if relevant Definition The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured. and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged. Comments Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.7 rim:* ./codeSystemVersion orim: fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion
code	Σ	0..1	code	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodePRKLijst.code Short description Symbol in syntax defined by the system Definition A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination). Requirements Need to refer to a particular code in the system. Comments Note that FHIR strings may not exceed 1MB in size Data type code Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.1 rim:* ./code orim: fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code
display	Σ	0..1	string	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodePRKLijst.display Short description Representation defined by the system Definition A representation of the meaning of the code in the system, following the rules of the system. Requirements Need to be able to carry a human-readable meaning of the code for readers that do not know the system. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.2 - but note this is not well followed rim:* CV.displayName orim: fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName
userSelected	Σ	0..1	boolean	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodePRKLijst.userSelected Short description If this coding was chosen directly by the user Definition Indicates that this coding was chosen by a user directly - i.e. off a pick list of available items (codes or displays). Requirements This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing. Comments Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely. Data type boolean Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: Sometimes implied by being first rim: CD.codingRationale orim: fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]
ingredientCodeSSKLijst	Σ	0..*	CodingBinding	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeSSKLijst Short description Code defined by a terminology system Definition A reference to a code defined by a terminology system. Requirements Allows for translations and alternate encodings within a code system. Also supports communication of the same instance to systems requiring different encodings. Comments Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. Data type Coding Binding IngredientCodeSSKLijst IngredientCodeSSKLijst (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim: CV orim: fhir:Coding rdfs:subClassOf dt:CDCoding v2: CE.1-8, CE.10-22 rim: union(., ./translation) orim: fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
id		0..1	string	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeSSKLijst.id Short description xml:id (or equivalent in JSON) Definition unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeSSKLijst.extension Short description Additional Content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
system	Σ	1..1	uriFixed Value	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeSSKLijst.system Short description Identity of the terminology system Definition The identification of the code system that defines the meaning of the symbol in the code. Requirements Need to be unambiguous about the source of the definition of the symbol. Comments The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Fixed value urn:oid:2.16.840.1.113883.2.4.4.1.725 Mappings rim: n/a v2: CE.3 rim:* ./codeSystem orim: fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem
version	Σ	0..1	string	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeSSKLijst.version Short description Version of the system - if relevant Definition The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured. and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged. Comments Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.7 rim:* ./codeSystemVersion orim: fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion
code	Σ	0..1	code	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeSSKLijst.code Short description Symbol in syntax defined by the system Definition A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination). Requirements Need to refer to a particular code in the system. Comments Note that FHIR strings may not exceed 1MB in size Data type code Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.1 rim:* ./code orim: fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code
display	Σ	0..1	string	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeSSKLijst.display Short description Representation defined by the system Definition A representation of the meaning of the code in the system, following the rules of the system. Requirements Need to be able to carry a human-readable meaning of the code for readers that do not know the system. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.2 - but note this is not well followed rim:* CV.displayName orim: fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName
userSelected	Σ	0..1	boolean	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.coding:ingredientCodeSSKLijst.userSelected Short description If this coding was chosen directly by the user Definition Indicates that this coding was chosen by a user directly - i.e. off a pick list of available items (codes or displays). Requirements This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing. Comments Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely. Data type boolean Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: Sometimes implied by being first rim: CD.codingRationale orim: fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]
text	Σ	0..1	string	There are no (further) constraints on this element Element id Medication.ingredient.item[x]:itemCodeableConcept.text Short description Plain text representation of the concept Definition A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user. Requirements The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source. Comments Very often the text is the same as a displayName of one of the codings. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE.9. But note many systems use CE.2 for this rim: ./originalText[mediaType/code="text/plain"]/data orim: fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText
isActive		0..1	boolean	There are no (further) constraints on this element Element id Medication.ingredient.isActive Short description Active ingredient indicator Definition Indication of whether this ingredient affects the therapeutic action of the drug. Requirements True indicates that the ingredient affects the therapeutic action of the drug (i.e. active). False indicates that the ingredient does not affect the therapeutic action of the drug (i.e. inactive). Data type boolean Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a rim: NA
amount	I	0..1	Ratio	There are no (further) constraints on this element Element id Medication.ingredient.amount Short description Concentration Alternate names Sterkte, Concentratie, Hoeveelheid Definition The relative amount of this ingredient in this product. Calculation of Concentration = Ingredient Amount ÷ Product Amount. This could be a concentration if the medication is dissolved in liquid, for example: 25mg/tablet or 50IE/ml of 200mg/500ml. Data type Ratio Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` rat-1: Numerator and denominator SHALL both be present, or both are absent. If both are absent, there SHALL be some extension present `(numerator.empty() xor denominator.exists()) and (numerator.exists() or extension.exists())` Examples Example of Concentration { "numerator": { "value": 5, "unit": "ml", "system": "http://unitsofmeasure.org", "code": "mL" }, "denominator": { "value": 200, "unit": "ml", "system": "http://unitsofmeasure.org", "code": "mL" } } Mappings rim: n/a v2: N/A rim: RTO script10.6: //element(,DrugCodedType)/Strength v2:* RXC-3-Component Amount & RXC-4-Component Units if medication: RXO-2-Requested Give Amount - Minimum & RXO-4-Requested Give Units / RXO-3-Requested Give Amount - Maximum & RXO-4-Requested Give Units / RXO-11-Requested Dispense Amount & RXO-12-Requested Dispense Units / RXE-3-Give Amount - Minimum & RXE-5-Give Units / RXE-4-Give Amount - Maximum & RXE-5-Give Units / RXE-10-Dispense Amount & RXE-10-Dispense Units rim: .quantity hcim-pharmaceuticalproduct-v2.0-2017EN: NL-CM:9.7.19933
id		0..1	string	There are no (further) constraints on this element Element id Medication.ingredient.amount.id Short description xml:id (or equivalent in JSON) Definition unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Medication.ingredient.amount.extension Short description Additional Content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
numerator	Σ I	0..1	Quantity	There are no (further) constraints on this element Element id Medication.ingredient.amount.numerator Short description IngredientAmount Alternate names IngredientHoeveelheid Definition The amount of this ingredient. This is the numerator for the calculation of the concentration. The unit should be selected from the G-Standard (Table 902) Comments The context of use may frequently define what kind of quantity this is and therefore what kind of units can be used. The context of use may also restrict the values for the comparator. Data type Quantity Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` qty-3: If a code for the unit is present, the system SHALL also be present `code.empty() or system.exists()` Mappings rim: n/a v2: SN (see also Range) or CQ rim: PQ, IVL<PQ>, MO, CO, depending on the values rim: .numerator hcim-pharmaceuticalproduct-v2.0-2017EN: NL-CM:9.7.22277
denominator	Σ I	0..1	Quantity	There are no (further) constraints on this element Element id Medication.ingredient.amount.denominator Short description ProductAmount Alternate names ProductHoeveelheid Definition Amount of the product. This is the denominator for the calculation of the concentration Comments The context of use may frequently define what kind of quantity this is and therefore what kind of units can be used. The context of use may also restrict the values for the comparator. Data type Quantity Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` qty-3: If a code for the unit is present, the system SHALL also be present `code.empty() or system.exists()` Mappings rim: n/a v2: SN (see also Range) or CQ rim: PQ, IVL<PQ>, MO, CO, depending on the values rim: .denominator hcim-pharmaceuticalproduct-v2.0-2017EN: NL-CM:9.7.22278
package		0..1	BackboneElement	There are no (further) constraints on this element Element id Medication.package Short description Details about packaged medications Definition Information that only applies to packages (not products). Data type BackboneElement Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a script10.6: no mapping rim: .player[classCode=CONT]
id		0..1	string	There are no (further) constraints on this element Element id Medication.package.id Short description xml:id (or equivalent in JSON) Definition unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Medication.package.extension Short description Additional Content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id Medication.package.modifierExtension Short description Extensions that cannot be ignored Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
container		0..1	CodeableConcept	There are no (further) constraints on this element Element id Medication.package.container Short description E.g. box, vial, blister-pack Definition The kind of container that this package comes as. Comments Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination. Data type CodeableConcept Binding A coded concept defining the kind of container a medication package is packaged in MedicationContainer (example) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD script10.6: no mapping rim: .code
content		0..*	BackboneElement	There are no (further) constraints on this element Element id Medication.package.content Short description What is in the package Definition A set of components that go to make up the described item. Data type BackboneElement Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a script10.6: no mapping rim: .scopesRole[typeCode=CONT]
id		0..1	string	There are no (further) constraints on this element Element id Medication.package.content.id Short description xml:id (or equivalent in JSON) Definition unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Medication.package.content.extension Short description Additional Content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id Medication.package.content.modifierExtension Short description Extensions that cannot be ignored Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
item[x]		1..1		There are no (further) constraints on this element Element id Medication.package.content.item[x] Short description The item in the package Definition Identifies one of the items in the package. Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a script10.6: no mapping rim: .player
itemCodeableConcept			CodeableConcept	There are no (further) constraints on this element Data type CodeableConcept
itemReference			Reference(HCIM PharmaceuticalProduct)	There are no (further) constraints on this element Data type Reference(HCIM PharmaceuticalProduct)
amount	I	0..1	SimpleQuantity	There are no (further) constraints on this element Element id Medication.package.content.amount Short description Quantity present in the package Definition The amount of the product that is in the package. Comments The context of use may frequently define what kind of quantity this is and therefore what kind of units can be used. The context of use may also restrict the values for the comparator. Data type SimpleQuantity Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` qty-3: If a code for the unit is present, the system SHALL also be present `code.empty() or system.exists()` sqty-1: The comparator is not used on a SimpleQuantity `comparator.empty()` Mappings rim: n/a v2: SN (see also Range) or CQ rim: PQ, IVL<PQ>, MO, CO, depending on the values script10.6: no mapping rim: .quantity
batch		0..*	BackboneElement	There are no (further) constraints on this element Element id Medication.package.batch Short description Identifies a single production run Definition Information about a group of medication produced or packaged from one production run. Data type BackboneElement Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a script10.6: no mapping rim: participation[typeCode=CSM].role[classCode=INST].scopedRole.scoper[classCode=MMAT].id
id		0..1	string	There are no (further) constraints on this element Element id Medication.package.batch.id Short description xml:id (or equivalent in JSON) Definition unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Medication.package.batch.extension Short description Additional Content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id Medication.package.batch.modifierExtension Short description Extensions that cannot be ignored Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
lotNumber		0..1	string	There are no (further) constraints on this element Element id Medication.package.batch.lotNumber Short description Identifier assigned to batch Definition The assigned lot number of a batch of the specified product. Comments Note that FHIR strings may not exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a script10.6: no mapping v2: RXA-15 Substance Lot Number / RXG-19 Substance Lot Number rim: .id
expirationDate		0..1	dateTime	There are no (further) constraints on this element Element id Medication.package.batch.expirationDate Short description When batch will expire Definition When this specific batch of product will expire. Data type dateTime Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` Mappings rim: n/a script10.6: no mapping v2: RXA-16 Substance Expiration Date / RXG-20 Substance Expiration Date rim: participation[typeCode=CSM].role[classCode=INST].scopedRole.scoper[classCode=MMAT].expirationTime
image	I	0..*	Attachment	There are no (further) constraints on this element Element id Medication.image Short description Picture of the medication Definition Photo(s) or graphic representation(s) of the medication. Requirements Note that "image" is only applicable when the medication.code represents a physical item (e.g. Amoxil 250 mg capsule) and not an abstract item (e.g. amoxicillin 250 mg). Comments When providing a summary view (for example with Observation.value[x]) Attachment should be represented with a brief display text such as "Attachment". Data type Attachment Constraints ele-1: All FHIR elements must have a @value or children `hasValue() \| (children().count() > id.count())` att-1: It the Attachment has data, it SHALL have a contentType `data.empty() or contentType.exists()` Mappings rim: n/a v2: ED/RP rim: ED rim: .participation[typeCode=SUBJ].role[classCode=MANU],source[classCode=OBS,moodCode=EVN,code="type of image"].value(ED.image)

Mapping FHIR profile NICE data dictionary

Path	identity	map	comment
Medication.code	NICE-Datadictionary-MDS	https://www.stichting-nice.nl/dd/#57	Chronic Obstructive Pulmonary Disease
Medication.code	NICE-Datadictionary-MDS	https://www.stichting-nice.nl/dd/#78	Diabetes
Medication.code	NICE-Datadictionary-MDS	https://www.stichting-nice.nl/dd/#159	Immunological insuffiency
Medication.code	NICE-Datadictionary-MDS	https://www.stichting-nice.nl/dd/#411	Thrombolytic therapy following acute myocardial infarction
Medication.code	NICE-Datadictionary-MDS	https://www.stichting-nice.nl/dd/#432	Vasoactive medication
Medication.code	NICE-Datadictionary-SOFA	https://www.stichting-nice.nl/dd/#18	Highest adrenaline speed
Medication.code	NICE-Datadictionary-SOFA	https://www.stichting-nice.nl/dd/#93	Dobutamine administration
Medication.code	NICE-Datadictionary-SOFA	https://www.stichting-nice.nl/dd/#94	Highest dopamine speed
Medication.code	NICE-Datadictionary-SOFA	https://www.stichting-nice.nl/dd/#224	Highest noradrenaline speed
Medication.code	NICE-Datadictionary-SOFA	https://www.stichting-nice.nl/dd/#238	Administration of phospodiesterase inhibitors
Medication.code	NICE-Datadictionary-Sepsis	https://www.stichting-nice.nl/dd/#740	Highest dopamine speed (Sepsis)
Medication.code	NICE-Datadictionary-Sepsis	https://www.stichting-nice.nl/dd/#742	Dobutamine administration (Sepsis)
Medication.code	NICE-Datadictionary-Sepsis	https://www.stichting-nice.nl/dd/#743	Administration of phospodiesterase inhibitors
Medication.code	NICE-Datadictionary-Sepsis	https://www.stichting-nice.nl/dd/#744	Highest adrenaline speed (Sepsis)
Medication.code	NICE-Datadictionary-Sepsis	https://www.stichting-nice.nl/dd/#745	Highest noradrenaline speed (Sepsis)
Medication.code	NICE-Datadictionary-Capacity	https://www.stichting-nice.nl/dd/#572	Continuous intravenous administration of antiarrythmics
Medication.code	NICE-Datadictionary-Capacity	https://www.stichting-nice.nl/dd/#576	Administration of arterial medication
Medication.code	NICE-Datadictionary-Capacity	https://www.stichting-nice.nl/dd/#599	Anticoagulation
Medication.code	NICE-Datadictionary-Capacity	https://www.stichting-nice.nl/dd/#611	Nutrition - parenteral
Medication.code	NICE-Datadictionary-Capacity	https://www.stichting-nice.nl/dd/#625	Antibiotics (IV)

{
    "resourceType": "Observation",
    "id": "NICE-BloodPressure-Example-01",
    "meta": {
        "profile":  [
            "https://fhir.stichting-nice.nl/STU3/StructureDefinition/NICE-BloodPressure-2022Q1"
        ]
    },
    "text": {
        "status": "generated",
        --- We have skipped the narrative for better readability of the resource ---
    },
    "extension":  [
        {
            "url": "https://fhir.stichting-nice.nl/STU3/StructureDefinition/NICE-Verified-2022Q1",
            "valueCodeableConcept": {
                "coding":  [
                    {
                        "system": "http://terminology.hl7.org/ValueSet/v2-0532",
                        "code": "Y",
                        "display": "Yes"
                    }
                ]
            }
        },
        {
            "url": "https://simplifier.net/nicefhirproject/nice-scoreday",
            "valueInteger": 1
        }
    ],
    "modifierExtension":  [
        {
            "url": "https://simplifier.net/nicefhirproject/nice-ExtremeValueType.structuredefinition",
            "valueCodeableConcept": {
                "coding":  [
                    {
                        "code": "H"
                    }
                ]
            }
        }
    ],
    "status": "final",
    "category":  [
        {
            "coding":  [
                {
                    "system": "http://hl7.org/fhir/observation-category",
                    "code": "vital-signs"
                }
            ]
        }
    ],
    "code": {
        "coding":  [
            {
                "system": "http://loinc.org",
                "code": "85354-9",
                "display": "Blood pressure panel with all children optional"
            }
        ]
    },
    "subject": {
        "reference": "Patient/NICE-Patient-01",
        "display": "P. Petersen"
    },
    "context": {
        "reference": "Encounter/NICE-Encounter-01"
    },
    "effectiveDateTime": "2022-01-08T08:43:00+02:00",
    "component":  [
        {
            "code": {
                "coding":  [
                    {
                        "system": "http://loinc.org",
                        "code": "8480-6",
                        "display": "Systolic blood pressure"
                    }
                ]
            },
            "valueQuantity": {
                "value": 142.0,
                "unit": "mm[Hg]",
                "system": "http://unitsofmeasure.org",
                "code": "mm[Hg]"
            }
        }
    ]
}

<Observation xmlns="http://hl7.org/fhir">
    <id value="NICE-BloodPressure-Example-01" />
    <meta>
        <profile value="https://fhir.stichting-nice.nl/STU3/StructureDefinition/NICE-BloodPressure-2022Q1" />
    </meta>
    <text>
        <status value="generated" />
        --- We have skipped the narrative for better readability of the resource ---
    </text>
    <extension url="https://fhir.stichting-nice.nl/STU3/StructureDefinition/NICE-Verified-2022Q1">
        <valueCodeableConcept>
            <coding>
                <system value="http://terminology.hl7.org/ValueSet/v2-0532" />
                <code value="Y" />
                <display value="Yes" />
            </coding>
        </valueCodeableConcept>
    </extension>
    <extension url="https://simplifier.net/nicefhirproject/nice-scoreday">
        <valueInteger value="1" />
    </extension>
    <modifierExtension url="https://simplifier.net/nicefhirproject/nice-ExtremeValueType.structuredefinition">
        <valueCodeableConcept>
            <coding>
                <code value="H" />
            </coding>
        </valueCodeableConcept>
    </modifierExtension>
    <status value="final" />
    <category>
        <coding>
            <system value="http://hl7.org/fhir/observation-category" />
            <code value="vital-signs" />
        </coding>
    </category>
    <code>
        <coding>
            <system value="http://loinc.org" />
            <code value="85354-9" />
            <display value="Blood pressure panel with all children optional" />
        </coding>
    </code>
    <subject>
        <reference value="Patient/NICE-Patient-01" />
        <display value="P. Petersen" />
    </subject>
    <context>
        <reference value="Encounter/NICE-Encounter-01" />
    </context>
    <effectiveDateTime value="2022-01-08T08:43:00+02:00" />
    <component>
        <code>
            <coding>
                <system value="http://loinc.org" />
                <code value="8480-6" />
                <display value="Systolic blood pressure" />
            </coding>
        </code>
        <valueQuantity>
            <value value="142.0" />
            <unit value="mm[Hg]" />
            <system value="http://unitsofmeasure.org" />
            <code value="mm[Hg]" />
        </valueQuantity>
    </component>
</Observation>