Coverage
| Coverage | C | Coverage | There are no (further) constraints on this element Element idCoverageShort description Insurance or medical plan or a payment agreement DefinitionFinancial instrument which may be used to reimburse or pay for health care products and services. Includes both insurance and self-payment. The Coverage resource contains the insurance card level information, which is customary to provide on claims and other communications between providers and insurers.
| |||
| id | Σ | 0..1 | string | There are no (further) constraints on this element Element idCoverage.idShort description Logical id of this artifact DefinitionThe logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes. The only time that a resource does not have an id is when it is being submitted to the server using a create operation. | ||
| meta | Σ | 0..1 | Meta | There are no (further) constraints on this element Element idCoverage.metaShort description Metadata about the resource DefinitionThe metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.
| ||
| implicitRules | Σ ?! | 0..1 | uri | There are no (further) constraints on this element Element idCoverage.implicitRulesShort description A set of rules under which this content was created DefinitionA reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc. Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.
| ||
| language | 0..1 | codeBinding | There are no (further) constraints on this element Element idCoverage.languageShort description Language of the resource content DefinitionThe base language in which the resource is written. Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute). A human language.
| |||
| text | 0..1 | Narrative | There are no (further) constraints on this element Element idCoverage.textShort description Text summary of the resource, for human interpretation Alternate namesnarrative, html, xhtml, display DefinitionA human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety. Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.
| |||
| contained | 0..* | Resource | There are no (further) constraints on this element Element idCoverage.containedShort description Contained, inline Resources Alternate namesinline resources, anonymous resources, contained resources DefinitionThese resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope. This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.
| |||
| extension | C | 0..* | Extension | Element idCoverage.extensionShort description Additional content defined by implementations Alternate namesextensions, user content DefinitionMay be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Unordered, Open, by url(Value) Constraints
| ||
| einlesedatum-karte | C | 0..* | Extension(dateTime) | Element idCoverage.extension:einlesedatum-karteShort description Optional Extensions Element Alternate namesextensions, user content DefinitionOptional Extension Element - found in all resources. There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. http://fhir.de/StructureDefinition/gkv/einlesedatum-karte ConditionsThe cardinality or value of this element may be affected by these constraints: ele-1 Constraints
| ||
| modifierExtension | ?! C | 0..* | Extension | There are no (further) constraints on this element Element idCoverage.modifierExtensionShort description Extensions that cannot be ignored Alternate namesextensions, user content DefinitionMay be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
| ||
| identifier | Σ | 0..* | Identifier | Element idCoverage.identifierShort description Business Identifier for the coverage DefinitionA unique identifier assigned to this coverage. Allows coverages to be distinguished and referenced. The main (and possibly only) identifier for the coverage - often referred to as a Member Id, Certificate number, Personal Health Number or Case ID. May be constructed as the concatenation of the Coverage.SubscriberID and the Coverage.dependant.
| ||
| id | 0..1 | string | There are no (further) constraints on this element Element idCoverage.identifier.idShort description Unique id for inter-element referencing DefinitionUnique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
| |||
| extension | C | 0..* | Extension | There are no (further) constraints on this element Element idCoverage.identifier.extensionShort description Additional content defined by implementations Alternate namesextensions, user content DefinitionMay be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints
| ||
| use | Σ ?! | 0..1 | codeBinding | There are no (further) constraints on this element Element idCoverage.identifier.useShort description usual | official | temp | secondary | old (If known) DefinitionThe purpose of this identifier. Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. Identifies the purpose for this identifier, if known .
| ||
| type | Σ | 0..1 | CodeableConceptBinding | There are no (further) constraints on this element Element idCoverage.identifier.typeShort description Description of identifier DefinitionA coded type for the identifier that can be used to determine which identifier to use for a specific purpose. Allows users to make use of identifiers when the identifier system is not known. This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible) Constraints
| ||
| system | Σ | 0..1 | uri | There are no (further) constraints on this element Element idCoverage.identifier.systemShort description The namespace for the identifier value DefinitionEstablishes the namespace for the value - that is, a URL that describes a set values that are unique. There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. Identifier.system is always case sensitive.
General http://www.acme.com/identifiers/patientMappings
| ||
| value | Σ | 1..1 | string | There are no (further) constraints on this element Element idCoverage.identifier.valueShort description The value that is unique DefinitionThe portion of the identifier typically relevant to the user and which is unique within the context of the system. If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.
General 123456Mappings
| ||
| period | Σ | 0..1 | Period | There are no (further) constraints on this element Element idCoverage.identifier.periodShort description Time period when id is/was valid for use DefinitionTime period during which identifier is/was valid for use.
| ||
| assigner | Σ | 0..1 | Reference(Organization) | There are no (further) constraints on this element Element idCoverage.identifier.assignerShort description Organization that issued id (may be just text) DefinitionOrganization that issued/manages the identifier. The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.
| ||
| status | Σ ?! | 1..1 | codeBinding | There are no (further) constraints on this element Element idCoverage.statusShort description active | cancelled | draft | entered-in-error DefinitionThe status of the resource instance. Need to track the status of the resource as 'draft' resources may undergo further edits while 'active' resources are immutable and may only have their status changed to 'cancelled'. This element is labeled as a modifier because the status contains the code entered-in-error that marks the coverage as not currently valid. A code specifying the state of the resource instance. FinancialResourceStatusCodes (required) Constraints
| ||
| type | Σ | 1..1 | CodeableConceptBinding | Element idCoverage.typeShort description Coverage category such as medical or accident DefinitionThe type of coverage: social program, medical plan, accident coverage (workers compensation, auto), group health or payment by an individual or organization. The order of application of coverages is dependent on the types of coverage. The type of insurance: public health, worker compensation; private accident, auto, private health, etc.) or a direct payment by an individual or organization. CoverageTypeAndSelf-PayCodes (preferred) Constraints
| ||
| id | 0..1 | string | There are no (further) constraints on this element Element idCoverage.type.idShort description Unique id for inter-element referencing DefinitionUnique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
| |||
| extension | C | 0..* | Extension | There are no (further) constraints on this element Element idCoverage.type.extensionShort description Additional content defined by implementations Alternate namesextensions, user content DefinitionMay be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints
| ||
| coding | Σ | 1..1 | Coding | There are no (further) constraints on this element Element idCoverage.type.codingShort description Code defined by a terminology system DefinitionA reference to a code defined by a terminology system. Allows for alternative encodings within a code system, and translations to other code systems. Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.
| ||
| id | 0..1 | string | There are no (further) constraints on this element Element idCoverage.type.coding.idShort description Unique id for inter-element referencing DefinitionUnique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
| |||
| extension | C | 0..* | Extension | There are no (further) constraints on this element Element idCoverage.type.coding.extensionShort description Additional content defined by implementations Alternate namesextensions, user content DefinitionMay be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints
| ||
| system | Σ | 1..1 | uriFixed Value | Element idCoverage.type.coding.systemShort description Identity of the terminology system DefinitionThe identification of the code system that defines the meaning of the symbol in the code. Need to be unambiguous about the source of the definition of the symbol. The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously.
http://fhir.de/CodeSystem/versicherungsart-de-basisMappings
| ||
| version | Σ | 0..0 | string | There are no (further) constraints on this element Element idCoverage.type.coding.versionShort description Version of the system - if relevant DefinitionThe version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged. Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.
| ||
| code | Σ | 1..1 | code | There are no (further) constraints on this element Element idCoverage.type.coding.codeShort description Symbol in syntax defined by the system DefinitionA symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination). Need to refer to a particular code in the system.
| ||
| display | Σ | 0..1 | string | There are no (further) constraints on this element Element idCoverage.type.coding.displayShort description Representation defined by the system DefinitionA representation of the meaning of the code in the system, following the rules of the system. Need to be able to carry a human-readable meaning of the code for readers that do not know the system.
| ||
| userSelected | Σ | 0..0 | boolean | There are no (further) constraints on this element Element idCoverage.type.coding.userSelectedShort description If this coding was chosen directly by the user DefinitionIndicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays). This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing. Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.
| ||
| text | Σ | 0..1 | string | There are no (further) constraints on this element Element idCoverage.type.textShort description Plain text representation of the concept DefinitionA human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user. The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source. Very often the text is the same as a displayName of one of the codings.
| ||
| policyHolder | Σ | 0..0 | Reference(Patient | RelatedPerson | Organization) | There are no (further) constraints on this element Element idCoverage.policyHolderShort description Owner of the policy DefinitionThe party who 'owns' the insurance policy. This provides employer information in the case of Worker's Compensation and other policies. For example: may be an individual, corporation or the subscriber's employer. Reference(Patient | RelatedPerson | Organization) Constraints
| ||
| subscriber | Σ | 0..1 | Reference(Patient | RelatedPerson) | Element idCoverage.subscriberShort description Subscriber to the policy DefinitionThe party who has signed-up for or 'owns' the contractual relationship to the policy or to whom the benefit of the policy for services rendered to them or their family is due. This is the party who is entitled to the benfits under the policy. May be self or a parent in the case of dependants. Reference(Patient | RelatedPerson) Constraints
| ||
| id | 0..1 | string | There are no (further) constraints on this element Element idCoverage.subscriber.idShort description Unique id for inter-element referencing DefinitionUnique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
| |||
| extension | C | 0..* | Extension | There are no (further) constraints on this element Element idCoverage.subscriber.extensionShort description Additional content defined by implementations Alternate namesextensions, user content DefinitionMay be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints
| ||
| reference | Σ C | 1..1 | string | There are no (further) constraints on this element Element idCoverage.subscriber.referenceShort description Literal reference, Relative, internal or absolute URL DefinitionA reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources. Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server. The cardinality or value of this element may be affected by these constraints: ref-1 Constraints
| ||
| type | Σ | 0..0 | uriBinding | There are no (further) constraints on this element Element idCoverage.subscriber.typeShort description Type the reference refers to (e.g. "Patient") DefinitionThe expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent. The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources). This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified. Aa resource (or, for logical models, the URI of the logical model).
| ||
| identifier | Σ | 0..0 | Identifier | There are no (further) constraints on this element Element idCoverage.subscriber.identifierShort description Logical reference, when literal reference is not known DefinitionAn identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference. When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it. Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).
| ||
| display | Σ | 0..1 | string | There are no (further) constraints on this element Element idCoverage.subscriber.displayShort description Text alternative for the resource DefinitionPlain text narrative that identifies the resource in addition to the resource reference. This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.
| ||
| subscriberId | Σ | 0..0 | string | There are no (further) constraints on this element Element idCoverage.subscriberIdShort description ID assigned to the subscriber DefinitionThe insurer assigned ID for the Subscriber. The insurer requires this identifier on correspondance and claims (digital and otherwise).
| ||
| beneficiary | Σ | 1..1 | Reference(Patient) | Element idCoverage.beneficiaryShort description Plan beneficiary DefinitionThe party who benefits from the insurance coverage; the patient when products and/or services are provided. This is the party who receives treatment for which the costs are reimbursed under the coverage.
| ||
| id | 0..1 | string | There are no (further) constraints on this element Element idCoverage.beneficiary.idShort description Unique id for inter-element referencing DefinitionUnique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
| |||
| extension | C | 0..* | Extension | There are no (further) constraints on this element Element idCoverage.beneficiary.extensionShort description Additional content defined by implementations Alternate namesextensions, user content DefinitionMay be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints
| ||
| reference | Σ C | 1..1 | string | There are no (further) constraints on this element Element idCoverage.beneficiary.referenceShort description Literal reference, Relative, internal or absolute URL DefinitionA reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources. Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server. The cardinality or value of this element may be affected by these constraints: ref-1 Constraints
| ||
| type | Σ | 0..0 | uriBinding | There are no (further) constraints on this element Element idCoverage.beneficiary.typeShort description Type the reference refers to (e.g. "Patient") DefinitionThe expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent. The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources). This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified. Aa resource (or, for logical models, the URI of the logical model).
| ||
| identifier | Σ | 0..0 | Identifier | There are no (further) constraints on this element Element idCoverage.beneficiary.identifierShort description Logical reference, when literal reference is not known DefinitionAn identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference. When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it. Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).
| ||
| display | Σ | 0..1 | string | There are no (further) constraints on this element Element idCoverage.beneficiary.displayShort description Text alternative for the resource DefinitionPlain text narrative that identifies the resource in addition to the resource reference. This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.
| ||
| dependent | Σ | 0..0 | string | There are no (further) constraints on this element Element idCoverage.dependentShort description Dependent number DefinitionA unique identifier for a dependent under the coverage. For some coverages a single identifier is issued to the Subscriber and then a unique dependent number is issued to each beneficiary. Periodically the member number is constructed from the subscriberId and the dependant number.
| ||
| relationship | 0..1 | CodeableConceptBinding | Element idCoverage.relationshipShort description Beneficiary relationship to the subscriber DefinitionThe relationship of beneficiary (patient) to the subscriber. To determine relationship between the patient and the subscriber to determine coordination of benefits. Typically, an individual uses policies which are theirs (relationship='self') before policies owned by others. The relationship between the Subscriber and the Beneficiary (insured/covered party/patient). SubscriberRelationshipCodes (extensible) Constraints
| |||
| period | Σ | 0..1 | Period | There are no (further) constraints on this element Element idCoverage.periodShort description Coverage start and end dates DefinitionTime period during which the coverage is in force. A missing start date indicates the start date isn't known, a missing end date means the coverage is continuing to be in force. Some insurers require the submission of the coverage term.
| ||
| payor | Σ | 1..* | Reference(Organization | Patient | RelatedPerson) | Element idCoverage.payorShort description Issuer of the policy DefinitionThe program or plan underwriter or payor including both insurance and non-insurance agreements, such as patient-pay agreements. Need to identify the issuer to target for claim processing and for coordination of benefit processing. May provide multiple identifiers such as insurance company identifier or business identifier (BIN number). For selfpay it may provide multiple paying persons and/or organizations. Reference(Organization | Patient | RelatedPerson) SlicingUnordered, Open, by type(Value) Constraints
| ||
| Patient | Σ | 0..* | Reference(Patient) | Element idCoverage.payor:PatientShort description Issuer of the policy DefinitionThe program or plan underwriter or payor including both insurance and non-insurance agreements, such as patient-pay agreements. Need to identify the issuer to target for claim processing and for coordination of benefit processing. May provide multiple identifiers such as insurance company identifier or business identifier (BIN number). For selfpay it may provide multiple paying persons and/or organizations.
| ||
| id | 0..1 | string | There are no (further) constraints on this element Element idCoverage.payor:Patient.idShort description Unique id for inter-element referencing DefinitionUnique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
| |||
| extension | C | 0..* | Extension | There are no (further) constraints on this element Element idCoverage.payor:Patient.extensionShort description Additional content defined by implementations Alternate namesextensions, user content DefinitionMay be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints
| ||
| reference | Σ C | 1..1 | string | There are no (further) constraints on this element Element idCoverage.payor:Patient.referenceShort description Literal reference, Relative, internal or absolute URL DefinitionA reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources. Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server. The cardinality or value of this element may be affected by these constraints: ref-1 Constraints
| ||
| type | Σ | 0..0 | uriBinding | There are no (further) constraints on this element Element idCoverage.payor:Patient.typeShort description Type the reference refers to (e.g. "Patient") DefinitionThe expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent. The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources). This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified. Aa resource (or, for logical models, the URI of the logical model).
| ||
| identifier | Σ | 0..0 | Identifier | There are no (further) constraints on this element Element idCoverage.payor:Patient.identifierShort description Logical reference, when literal reference is not known DefinitionAn identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference. When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it. Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).
| ||
| display | Σ | 0..1 | string | There are no (further) constraints on this element Element idCoverage.payor:Patient.displayShort description Text alternative for the resource DefinitionPlain text narrative that identifies the resource in addition to the resource reference. This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.
| ||
| RelatedPerson | Σ | 0..* | Reference(RelatedPerson) | Element idCoverage.payor:RelatedPersonShort description Issuer of the policy DefinitionThe program or plan underwriter or payor including both insurance and non-insurance agreements, such as patient-pay agreements. Need to identify the issuer to target for claim processing and for coordination of benefit processing. May provide multiple identifiers such as insurance company identifier or business identifier (BIN number). For selfpay it may provide multiple paying persons and/or organizations.
| ||
| id | 0..1 | string | There are no (further) constraints on this element Element idCoverage.payor:RelatedPerson.idShort description Unique id for inter-element referencing DefinitionUnique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
| |||
| extension | C | 0..* | Extension | There are no (further) constraints on this element Element idCoverage.payor:RelatedPerson.extensionShort description Additional content defined by implementations Alternate namesextensions, user content DefinitionMay be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints
| ||
| reference | Σ C | 1..1 | string | There are no (further) constraints on this element Element idCoverage.payor:RelatedPerson.referenceShort description Literal reference, Relative, internal or absolute URL DefinitionA reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources. Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server. The cardinality or value of this element may be affected by these constraints: ref-1 Constraints
| ||
| type | Σ | 0..0 | uriBinding | There are no (further) constraints on this element Element idCoverage.payor:RelatedPerson.typeShort description Type the reference refers to (e.g. "Patient") DefinitionThe expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent. The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources). This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified. Aa resource (or, for logical models, the URI of the logical model).
| ||
| identifier | Σ | 0..0 | Identifier | There are no (further) constraints on this element Element idCoverage.payor:RelatedPerson.identifierShort description Logical reference, when literal reference is not known DefinitionAn identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference. When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it. Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).
| ||
| display | Σ | 0..1 | string | There are no (further) constraints on this element Element idCoverage.payor:RelatedPerson.displayShort description Text alternative for the resource DefinitionPlain text narrative that identifies the resource in addition to the resource reference. This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.
| ||
| Organization | Σ | 0..* | Reference(Organization) | Element idCoverage.payor:OrganizationShort description Issuer of the policy DefinitionThe program or plan underwriter or payor including both insurance and non-insurance agreements, such as patient-pay agreements. Need to identify the issuer to target for claim processing and for coordination of benefit processing. May provide multiple identifiers such as insurance company identifier or business identifier (BIN number). For selfpay it may provide multiple paying persons and/or organizations.
| ||
| id | 0..1 | string | There are no (further) constraints on this element Element idCoverage.payor:Organization.idShort description Unique id for inter-element referencing DefinitionUnique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
| |||
| extension | C | 0..* | Extension | There are no (further) constraints on this element Element idCoverage.payor:Organization.extensionShort description Additional content defined by implementations Alternate namesextensions, user content DefinitionMay be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints
| ||
| reference | Σ C | 1..1 | string | There are no (further) constraints on this element Element idCoverage.payor:Organization.referenceShort description Literal reference, Relative, internal or absolute URL DefinitionA reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources. Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server. The cardinality or value of this element may be affected by these constraints: ref-1 Constraints
| ||
| type | Σ | 0..0 | uriBinding | There are no (further) constraints on this element Element idCoverage.payor:Organization.typeShort description Type the reference refers to (e.g. "Patient") DefinitionThe expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent. The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources). This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified. Aa resource (or, for logical models, the URI of the logical model).
| ||
| identifier | Σ | 0..0 | Identifier | There are no (further) constraints on this element Element idCoverage.payor:Organization.identifierShort description Logical reference, when literal reference is not known DefinitionAn identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference. When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it. Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).
| ||
| display | Σ | 0..1 | string | There are no (further) constraints on this element Element idCoverage.payor:Organization.displayShort description Text alternative for the resource DefinitionPlain text narrative that identifies the resource in addition to the resource reference. This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.
| ||
| class | 0..0 | BackboneElement | There are no (further) constraints on this element Element idCoverage.classShort description Additional coverage classifications DefinitionA suite of underwriter specific classifiers. The codes provided on the health card which identify or confirm the specific policy for the insurer. For example may be used to identify a class of coverage or employer group, Policy, Plan.
| |||
| order | Σ | 0..1 | positiveInt | Element idCoverage.orderShort description Relative order of the coverage DefinitionThe order of applicability of this coverage relative to other coverages which are currently in force. Note, there may be gaps in the numbering and this does not imply primary, secondary etc. as the specific positioning of coverages depends upon the episode of care. Used in managing the coordination of benefits.
| ||
| network | Σ | 0..0 | string | There are no (further) constraints on this element Element idCoverage.networkShort description Insurer network DefinitionThe insurer-specific identifier for the insurer-defined network of providers to which the beneficiary may seek treatment which will be covered at the 'in-network' rate, otherwise 'out of network' terms and conditions apply. Used in referral for treatment and in claims processing.
| ||
| costToBeneficiary | 0..* | BackboneElement | There are no (further) constraints on this element Element idCoverage.costToBeneficiaryShort description Patient payments for services/products Alternate namesCoPay, Deductible, Exceptions DefinitionA suite of codes indicating the cost category and associated amount which have been detailed in the policy and may have been included on the health card. Required by providers to manage financial transaction with the patient. For example by knowing the patient visit co-pay, the provider can collect the amount prior to undertaking treatment.
| |||
| id | 0..1 | string | There are no (further) constraints on this element Element idCoverage.costToBeneficiary.idShort description Unique id for inter-element referencing DefinitionUnique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
| |||
| extension | C | 0..* | Extension | There are no (further) constraints on this element Element idCoverage.costToBeneficiary.extensionShort description Additional content defined by implementations Alternate namesextensions, user content DefinitionMay be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
| ||
| modifierExtension | Σ ?! C | 0..* | Extension | There are no (further) constraints on this element Element idCoverage.costToBeneficiary.modifierExtensionShort description Extensions that cannot be ignored even if unrecognized Alternate namesextensions, user content, modifiers DefinitionMay be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
| ||
| type | Σ | 0..1 | CodeableConceptBinding | There are no (further) constraints on this element Element idCoverage.costToBeneficiary.typeShort description Cost category DefinitionThe category of patient centric costs associated with treatment. Needed to identify the category associated with the amount for the patient. For example visit, specialist visits, emergency, inpatient care, etc. The types of services to which patient copayments are specified. CoverageCopayTypeCodes (extensible) Constraints
| ||
| value[x] | Σ | 1..1 | There are no (further) constraints on this element Element idCoverage.costToBeneficiary.value[x]Short description The amount or percentage due from the beneficiary DefinitionThe amount due from the patient for the cost category. Needed to identify the amount for the patient associated with the category. Amount may be expressed as a percentage of the service/product cost or a fixed amount of currency.
| |||
| valueQuantity | SimpleQuantity | There are no (further) constraints on this element Data type | ||||
| valueMoney | Money | There are no (further) constraints on this element Data type | ||||
| exception | 0..* | BackboneElement | There are no (further) constraints on this element Element idCoverage.costToBeneficiary.exceptionShort description Exceptions for patient payments DefinitionA suite of codes indicating exceptions or reductions to patient costs and their effective periods. Required by providers to manage financial transaction with the patient.
| |||
| id | 0..1 | string | There are no (further) constraints on this element Element idCoverage.costToBeneficiary.exception.idShort description Unique id for inter-element referencing DefinitionUnique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
| |||
| extension | C | 0..* | Extension | There are no (further) constraints on this element Element idCoverage.costToBeneficiary.exception.extensionShort description Additional content defined by implementations Alternate namesextensions, user content DefinitionMay be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
| ||
| modifierExtension | Σ ?! C | 0..* | Extension | There are no (further) constraints on this element Element idCoverage.costToBeneficiary.exception.modifierExtensionShort description Extensions that cannot be ignored even if unrecognized Alternate namesextensions, user content, modifiers DefinitionMay be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
| ||
| type | Σ | 1..1 | CodeableConcept | There are no (further) constraints on this element Element idCoverage.costToBeneficiary.exception.typeShort description Exception category DefinitionThe code for the specific exception. Needed to identify the exception associated with the amount for the patient. The types of exceptions from the part or full value of financial obligations such as copays. ExampleCoverageFinancialExceptionCodes (example) Constraints
| ||
| period | Σ | 0..1 | Period | There are no (further) constraints on this element Element idCoverage.costToBeneficiary.exception.periodShort description The effective period of the exception DefinitionThe timeframe during when the exception is in force. Needed to identify the applicable timeframe for the exception for the correct calculation of patient costs.
| ||
| subrogation | 0..1 | boolean | There are no (further) constraints on this element Element idCoverage.subrogationShort description Reimbursement to insurer DefinitionWhen 'subrogation=true' this insurance instance has been included not for adjudication but to provide insurers with the details to recover costs. See definition for when to be used. Typically, automotive and worker's compensation policies would be flagged with 'subrogation=true' to enable healthcare payors to collect against accident claims.
| |||
| contract | 0..0 | Reference(Contract) | There are no (further) constraints on this element Element idCoverage.contractShort description Contract details DefinitionThe policy(s) which constitute this insurance coverage. To reference the legally binding contract between the policy holder and the insurer.
|
Example JSON
Example data record:
Example XML
Example data record: