UK Core Implementation Guide 0.4.0

Please note:

The UK Core 0.4.0 STU1 is in development with the updates and bug fixes following the 2 week review of 0.3.0 (Pre-Release).
There will be disruption as the content will be updated daily and with links not working.
Please follow the guidance on the "Contact Us" page if you need any assistance.

StructureDefinition-UKCore-RelatedPerson

Defines the UK Core constraints and extensions on the RelatedPerson resource for the minimal set of data to query and retrieve related person information.

Profile Purpose

This profile allows exchange of information about a person that is involved in the care for an individual, but who is not the target of healthcare, nor has a formal responsibility in the care process.

Snapshot View

RelatedPerson	I		RelatedPerson	There are no (further) constraints on this element Element Id RelatedPerson Short description A person that is related to a patient, but who is not a direct target of care Definition Information about a person that is involved in the care for a patient, but who is not the target of healthcare, nor has a formal responsibility in the care process. Data Type RelatedPerson Constraints dom-2:If the resource is contained in another resource, it SHALL NOT contain nested Resources `contained.contained.empty()` dom-4:If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated `contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()` dom-3:If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource `contained.where((('#'+id in (%resource.descendants().reference \| %resource.descendants().as(canonical) \| %resource.descendants().as(uri) \| %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty()` dom-6:A resource should have narrative for robust management text.`div`.exists() dom-5:If a resource is contained in another resource, it SHALL NOT have a security label `contained.meta.security.empty()` Mappings rim:Entity. Role, or Act rim:role
extension	I	0..*	Extension	Element Id RelatedPerson.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data Type Extension Sliced: Unordered, Open, by url(Value) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
contactPreference	I	0..1	Extension(Complex)	Element Id RelatedPerson.extension:contactPreference Short description The preferred method of contact, contact times and written communication format given by a Patient or Related Person. Alternate names extensions, user content Definition The preferred method of contact, contact times and written communication format given by a Patient or Related Person. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data Type Extension(Complex) Extension URL https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-ContactPreference Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
contactRank	I	0..1	Extension(positiveInt)	Element Id RelatedPerson.extension:contactRank Short description Preferred ranking or order of contact applied to a contact on a patient's contact list Alternate names extensions, user content Definition The preferred ranking or order of contact applied to a contact on a patient's contact list. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data Type Extension(positiveInt) Extension URL https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-ContactRank Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
copyCorrespondenceIndicator	I	0..1	Extension(boolean)	Element Id RelatedPerson.extension:copyCorrespondenceIndicator Short description Indicator showing that a patient's contact or related person must be copied in to patient correspondence Alternate names extensions, user content Definition Extension carrying a boolean indicator showing that a patient's contact or related person must be copied in to patient correspondence. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data Type Extension(boolean) Extension URL https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-CopyCorrespondenceIndicator Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
identifier	Σ	0..*	Identifier	There are no (further) constraints on this element Element Id RelatedPerson.identifier Short description A human identifier for this person Definition Identifier for a person within a particular scope. Requirements People are known by a variety of ids. Some institutions maintain several, and most collect identifiers for exchange with other organizations concerning the patient. Examples are national person identifier and local identifier. Data Type Identifier Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CX / EI (occasionally, more often EI maps to a resource id or a URL) rim:II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd:Identifier w5:FiveWs.identifier v2:NK1-33 rim:.id
use	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element Id RelatedPerson.identifier.use Short description usual \| official \| temp \| secondary \| old (If known) Definition The purpose of this identifier. Requirements Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. Comments Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. Data Type code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:N/A rim:Role.code or implied by context
type	Σ	0..1	CodeableConceptBinding	There are no (further) constraints on this element Element Id RelatedPerson.identifier.type Short description Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. Requirements Allows users to make use of identifiers when the identifier system is not known. Comments This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. Data Type CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE rim:CD orim:fhir:CodeableConcept rdfs:subClassOf dt:CD v2:CX.5 rim:Role.code or implied by context
system	Σ	0..1	uri	There are no (further) constraints on this element Element Id RelatedPerson.identifier.system Short description The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique. Requirements There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. Comments Identifier.system is always case sensitive. Data Type uri Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General http://www.acme.com/identifiers/patient Mappings rim:n/a v2:CX.4 / EI-2-4 rim:II.root or Role.id.root servd:./IdentifierType
value	Σ	0..1	string	There are no (further) constraints on this element Element Id RelatedPerson.identifier.value Short description The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system. Comments If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General 123456 Mappings rim:n/a v2:CX.1 / EI.1 rim:II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd:./Value
period	Σ I	0..1	Period	There are no (further) constraints on this element Element Id RelatedPerson.identifier.period Short description Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use. Comments A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration. Data Type Period Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` per-1:If present, start SHALL have a lower value than end `start.hasValue().not() or end.hasValue().not() or (start <= end)` Mappings rim:n/a v2:DR rim:IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"] v2:CX.7 + CX.8 rim:Role.effectiveTime or implied by context servd:./StartDate and ./EndDate
assigner	Σ I	0..1	Reference(UK Core Organization)	Element Id RelatedPerson.identifier.assigner Short description Organization that issued id (may be just text) Definition Organization that issued/manages the identifier. Comments The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. Data Type Reference(UK Core Organization) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1:SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim:n/a rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2:CX.4 / (CX.4,CX.9,CX.10) rim:II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd:./IdentifierIssuingAuthority
active	Σ ?!	0..1	boolean	There are no (further) constraints on this element Element Id RelatedPerson.active Short description Whether this related person's record is in active use Definition Whether this related person record is in active use. Requirements Need to be able to mark a related person record as not to be used, such as if it was created in error. Comments This element is labeled as a modifier because it may be used to mark that the resource was created in error. Data Type boolean Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a w5:FiveWs.status rim:.statusCode
patient	Σ I	1..1	Reference(UK Core Patient)	Element Id RelatedPerson.patient Short description The patient this person is related to Definition The patient this person is related to. Requirements We need to know which patient this RelatedPerson is related to. Comments References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository. Data Type Reference(UK Core Patient) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1:SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim:n/a rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2:PID-3 rim:scoper[classCode=PSN\|ANM and determinerCode='INSTANCE']/playedRole[classCode='PAT']/id
reference	Σ I	0..1	string	There are no (further) constraints on this element Element Id RelatedPerson.patient.reference Short description Literal reference, Relative, internal or absolute URL Definition A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources. Comments Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
type	Σ	0..1	uriBinding	There are no (further) constraints on this element Element Id RelatedPerson.patient.type Short description Type the reference refers to (e.g. "Patient") Definition The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent. The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources). Comments This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified. Data Type uri Binding Aa resource (or, for logical models, the URI of the logical model). ResourceType (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
identifier	Σ	0..1	Identifier	There are no (further) constraints on this element Element Id RelatedPerson.patient.identifier Short description Logical reference, when literal reference is not known Definition An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference. Comments When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it. Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation\|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any). Data Type Identifier Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CX / EI (occasionally, more often EI maps to a resource id or a URL) rim:II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd:Identifier rim:.identifier
use	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element Id RelatedPerson.patient.identifier.use Short description usual \| official \| temp \| secondary \| old (If known) Definition The purpose of this identifier. Requirements Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. Comments Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. Data Type code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:N/A rim:Role.code or implied by context
type	Σ	0..1	CodeableConceptBinding	There are no (further) constraints on this element Element Id RelatedPerson.patient.identifier.type Short description Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. Requirements Allows users to make use of identifiers when the identifier system is not known. Comments This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. Data Type CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE rim:CD orim:fhir:CodeableConcept rdfs:subClassOf dt:CD v2:CX.5 rim:Role.code or implied by context
system	Σ	0..1	uri	There are no (further) constraints on this element Element Id RelatedPerson.patient.identifier.system Short description The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique. Requirements There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. Comments Identifier.system is always case sensitive. Data Type uri Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General http://www.acme.com/identifiers/patient Mappings rim:n/a v2:CX.4 / EI-2-4 rim:II.root or Role.id.root servd:./IdentifierType
value	Σ	0..1	string	There are no (further) constraints on this element Element Id RelatedPerson.patient.identifier.value Short description The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system. Comments If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General 123456 Mappings rim:n/a v2:CX.1 / EI.1 rim:II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd:./Value
period	Σ I	0..1	Period	There are no (further) constraints on this element Element Id RelatedPerson.patient.identifier.period Short description Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use. Comments A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration. Data Type Period Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` per-1:If present, start SHALL have a lower value than end `start.hasValue().not() or end.hasValue().not() or (start <= end)` Mappings rim:n/a v2:DR rim:IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"] v2:CX.7 + CX.8 rim:Role.effectiveTime or implied by context servd:./StartDate and ./EndDate
assigner	Σ I	0..1	Reference(UK Core Organization)	Element Id RelatedPerson.patient.identifier.assigner Short description Organization that issued id (may be just text) Definition Organization that issued/manages the identifier. Comments The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. Data Type Reference(UK Core Organization) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1:SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim:n/a rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2:CX.4 / (CX.4,CX.9,CX.10) rim:II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd:./IdentifierIssuingAuthority
display	Σ	0..1	string	There are no (further) constraints on this element Element Id RelatedPerson.patient.display Short description Text alternative for the resource Definition Plain text narrative that identifies the resource in addition to the resource reference. Comments This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
relationship	Σ	0..*	CodeableConceptBinding	Element Id RelatedPerson.relationship Short description The nature of the relationship Definition The nature of the relationship between a patient and the related person. Requirements We need to know the relationship with the patient since it influences the interpretation of the information attributed to this person. Comments Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination. Data Type CodeableConcept Binding The nature of the relationship between a patient and the related person. UKCorePersonRelationshipType (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE rim:CD orim:fhir:CodeableConcept rdfs:subClassOf dt:CD w5:FiveWs.class v2:NK1-3 rim:code
name	Σ	0..*	HumanName	There are no (further) constraints on this element Element Id RelatedPerson.name Short description A name associated with the person Definition A name associated with the person. Requirements Related persons need to be identified by name, but it is uncommon to need details about multiple other names for that person. Comments Names may be changed, or repudiated, or people may have different names in different contexts. Names may be divided into parts of different type that have variable significance depending on context, though the division into parts does not always matter. With personal names, the different parts might or might not be imbued with some implicit meaning; various cultures associate different importance with the name parts and the degree to which systems must care about name parts around the world varies widely. Data Type HumanName Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:XPN rim:EN (actually, PN) servd:ProviderName v2:NK1-2 rim:name
telecom	Σ I	0..*	ContactPoint	There are no (further) constraints on this element Element Id RelatedPerson.telecom Short description A contact detail for the person Definition A contact detail for the person, e.g. a telephone number or an email address. Requirements People have (primary) ways to contact them in some way such as phone, email. Comments Person may have multiple ways to be contacted with different uses or applicable periods. May need to have options for contacting the person urgently, and also to help with identification. Data Type ContactPoint Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` cpt-2:A system is required if a value is provided. `value.empty() or system.exists()` Mappings rim:n/a v2:XTN rim:TEL servd:ContactPoint v2:NK1-5 / NK1-6 / NK1-40 rim:telecom
system	Σ I	0..1	codeBinding	There are no (further) constraints on this element Element Id RelatedPerson.telecom.system Short description phone \| fax \| email \| pager \| url \| sms \| other Definition Telecommunications form for contact point - what communications system is required to make use of the contact. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data Type code Binding Telecommunications form for contact point. ContactPointSystem (required) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:XTN.3 rim:./scheme servd:./ContactPointType
extension	I	0..*	Extension	Element Id RelatedPerson.telecom.system.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data Type Extension Sliced: Unordered, Open, by url(Value) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
otherContactSystem	I	0..1	Extension(Coding)	Element Id RelatedPerson.telecom.system.extension:otherContactSystem Short description Other contact system Alternate names extensions, user content Definition Other contact system value which extends the system element in the ContactPoint datatype. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data Type Extension(Coding) Extension URL https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-OtherContactSystem Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
value	Σ	0..1	string	There are no (further) constraints on this element Element Id RelatedPerson.telecom.value Short description The actual contact point details Definition The actual contact point details, in a form that is meaningful to the designated communication system (i.e. phone number or email address). Requirements Need to support legacy numbers that are not in a tightly controlled format. Comments Additional text data such as phone extension numbers, or notes about use of the contact are sometimes included in the value. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:XTN.1 (or XTN.12) rim:./url servd:./Value
use	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element Id RelatedPerson.telecom.use Short description home \| work \| temp \| old \| mobile - purpose of this contact point Definition Identifies the purpose for the contact point. Requirements Need to track the way a person uses this contact, so a user can choose which is appropriate for their purpose. Comments Applications can assume that a contact is current unless it explicitly says that it is temporary or old. Data Type code Binding Use of contact point. ContactPointUse (required) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:XTN.2 - but often indicated by field rim:unique(./use) servd:./ContactPointPurpose
rank	Σ	0..1	positiveInt	There are no (further) constraints on this element Element Id RelatedPerson.telecom.rank Short description Specify preferred order of use (1 = highest) Definition Specifies a preferred order in which to use a set of contacts. ContactPoints with lower rank values are more preferred than those with higher rank values. Comments Note that rank does not necessarily follow the order in which the contacts are represented in the instance. Data Type positiveInt Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:n/a
period	Σ I	0..1	Period	There are no (further) constraints on this element Element Id RelatedPerson.telecom.period Short description Time period when the contact point was/is in use Definition Time period when the contact point was/is in use. Comments A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration. Data Type Period Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` per-1:If present, start SHALL have a lower value than end `start.hasValue().not() or end.hasValue().not() or (start <= end)` Mappings rim:n/a v2:DR rim:IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"] v2:N/A rim:./usablePeriod[type="IVL<TS>"] servd:./StartDate and ./EndDate
gender	Σ	0..1	codeBinding	There are no (further) constraints on this element Element Id RelatedPerson.gender Short description male \| female \| other \| unknown Definition Administrative Gender - the gender that the person is considered to have for administration and record keeping purposes. Requirements Needed for identification of the person, in combination with (at least) name and birth date. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data Type code Binding The gender of a person used for administrative purposes. AdministrativeGender (required) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:NK1-15 rim:administrativeGender
birthDate	Σ	0..1	date	There are no (further) constraints on this element Element Id RelatedPerson.birthDate Short description The date on which the related person was born Definition The date on which the related person was born. Data Type date Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:player.birthTime
address	Σ	0..*	Address	There are no (further) constraints on this element Element Id RelatedPerson.address Short description Address where the related person can be contacted or visited Definition Address where the related person can be contacted or visited. Requirements Need to keep track where the related person can be contacted per postal mail or visited. Comments Note: address is intended to describe postal addresses for administrative purposes, not to describe absolute geographical coordinates. Postal addresses are often used as proxies for physical locations (also see the Location resource). Data Type Address Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:XAD rim:AD servd:Address v2:NK1-4 rim:addr
photo	I	0..*	Attachment	There are no (further) constraints on this element Element Id RelatedPerson.photo Short description Image of the person Definition Image of the person. Requirements Many EHR systems have the capability to capture an image of persons. Fits with newer social media usage too. Comments When providing a summary view (for example with Observation.value[x]) Attachment should be represented with a brief display text such as "Signed Procedure Consent". Data Type Attachment Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` att-1:If the Attachment has data, it SHALL have a contentType `data.empty() or contentType.exists()` Mappings rim:n/a v2:ED/RP rim:ED v2:OBX-5 - needs a profile rim:player[classCode='PSN' and determinerCode='INSTANCE']/desc
period	I	0..1	Period	There are no (further) constraints on this element Element Id RelatedPerson.period Short description Period of time that this relationship is considered valid Definition The period of time during which this relationship is or was active. If there are no dates defined, then the interval is unknown. Comments A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration. Data Type Period Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` per-1:If present, start SHALL have a lower value than end `start.hasValue().not() or end.hasValue().not() or (start <= end)` Mappings rim:n/a v2:DR rim:IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"] w5:FiveWs.done[x] rim:.effectiveTime
communication		0..*	BackboneElement	There are no (further) constraints on this element Element Id RelatedPerson.communication Short description A language which may be used to communicate with about the patient's health Definition A language which may be used to communicate with about the patient's health. Requirements If a related person does not speak the local language, interpreters may be required, so languages spoken and proficiency is an important things to keep track of both for patient and other persons of interest. Comments If no language is specified, this implies that the default local language is spoken. If you need to convey proficiency for multiple modes, then you need multiple RelatedPerson.Communication associations. If the RelatedPerson does not speak the default local language, then the Interpreter Required Standard can be used to explicitly declare that an interpreter is required. Data Type BackboneElement Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:LanguageCommunication
language		1..1	CodeableConceptBinding	There are no (further) constraints on this element Element Id RelatedPerson.communication.language Short description The language which can be used to communicate with the patient about his or her health Definition The ISO-639-1 alpha 2 code in lower case for the language, optionally followed by a hyphen and the ISO-3166-1 alpha 2 code for the region in upper case; e.g. "en" for English, or "en-US" for American English versus "en-EN" for England English. Requirements Most systems in multilingual countries will want to convey language. Not all systems actually need the regional dialect. Comments The structure aa-BB with this exact casing is one the most widely used notations for locale. However not all systems actually code this but instead have it as free text. Hence CodeableConcept instead of code as the data type. Data Type CodeableConcept Binding A human language. CommonLanguages (preferred) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE rim:CD orim:fhir:CodeableConcept rdfs:subClassOf dt:CD rim:player[classCode=PSN\|ANM and determinerCode=INSTANCE]/languageCommunication/code
preferred		0..1	boolean	There are no (further) constraints on this element Element Id RelatedPerson.communication.preferred Short description Language preference indicator Definition Indicates whether or not the patient prefers this language (over other languages he masters up a certain level). Requirements People that master multiple languages up to certain level may prefer one or more, i.e. feel more confident in communicating in a particular language making other languages sort of a fall back method. Comments This language is specifically identified for communicating healthcare information. Data Type boolean Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:preferenceInd

Differential View

RelatedPerson	I		RelatedPerson	There are no (further) constraints on this element Element Id RelatedPerson Short description A person that is related to a patient, but who is not a direct target of care Definition Information about a person that is involved in the care for a patient, but who is not the target of healthcare, nor has a formal responsibility in the care process. Data Type RelatedPerson Constraints dom-2:If the resource is contained in another resource, it SHALL NOT contain nested Resources `contained.contained.empty()` dom-4:If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated `contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()` dom-3:If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource `contained.where((('#'+id in (%resource.descendants().reference \| %resource.descendants().as(canonical) \| %resource.descendants().as(uri) \| %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty()` dom-6:A resource should have narrative for robust management text.`div`.exists() dom-5:If a resource is contained in another resource, it SHALL NOT have a security label `contained.meta.security.empty()` Mappings rim:Entity. Role, or Act rim:role
extension	I	0..*	Extension	Element Id RelatedPerson.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data Type Extension Sliced: Unordered, Open, by url(Value) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
contactPreference	I	0..1	Extension(Complex)	Element Id RelatedPerson.extension:contactPreference Short description The preferred method of contact, contact times and written communication format given by a Patient or Related Person. Alternate names extensions, user content Definition The preferred method of contact, contact times and written communication format given by a Patient or Related Person. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data Type Extension(Complex) Extension URL https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-ContactPreference Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
contactRank	I	0..1	Extension(positiveInt)	Element Id RelatedPerson.extension:contactRank Short description Preferred ranking or order of contact applied to a contact on a patient's contact list Alternate names extensions, user content Definition The preferred ranking or order of contact applied to a contact on a patient's contact list. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data Type Extension(positiveInt) Extension URL https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-ContactRank Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
copyCorrespondenceIndicator	I	0..1	Extension(boolean)	Element Id RelatedPerson.extension:copyCorrespondenceIndicator Short description Indicator showing that a patient's contact or related person must be copied in to patient correspondence Alternate names extensions, user content Definition Extension carrying a boolean indicator showing that a patient's contact or related person must be copied in to patient correspondence. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data Type Extension(boolean) Extension URL https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-CopyCorrespondenceIndicator Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
identifier	Σ	0..*	Identifier	There are no (further) constraints on this element Element Id RelatedPerson.identifier Short description A human identifier for this person Definition Identifier for a person within a particular scope. Requirements People are known by a variety of ids. Some institutions maintain several, and most collect identifiers for exchange with other organizations concerning the patient. Examples are national person identifier and local identifier. Data Type Identifier Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CX / EI (occasionally, more often EI maps to a resource id or a URL) rim:II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd:Identifier w5:FiveWs.identifier v2:NK1-33 rim:.id
use	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element Id RelatedPerson.identifier.use Short description usual \| official \| temp \| secondary \| old (If known) Definition The purpose of this identifier. Requirements Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. Comments Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. Data Type code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:N/A rim:Role.code or implied by context
type	Σ	0..1	CodeableConceptBinding	There are no (further) constraints on this element Element Id RelatedPerson.identifier.type Short description Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. Requirements Allows users to make use of identifiers when the identifier system is not known. Comments This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. Data Type CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE rim:CD orim:fhir:CodeableConcept rdfs:subClassOf dt:CD v2:CX.5 rim:Role.code or implied by context
system	Σ	0..1	uri	There are no (further) constraints on this element Element Id RelatedPerson.identifier.system Short description The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique. Requirements There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. Comments Identifier.system is always case sensitive. Data Type uri Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General http://www.acme.com/identifiers/patient Mappings rim:n/a v2:CX.4 / EI-2-4 rim:II.root or Role.id.root servd:./IdentifierType
value	Σ	0..1	string	There are no (further) constraints on this element Element Id RelatedPerson.identifier.value Short description The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system. Comments If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General 123456 Mappings rim:n/a v2:CX.1 / EI.1 rim:II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd:./Value
period	Σ I	0..1	Period	There are no (further) constraints on this element Element Id RelatedPerson.identifier.period Short description Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use. Comments A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration. Data Type Period Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` per-1:If present, start SHALL have a lower value than end `start.hasValue().not() or end.hasValue().not() or (start <= end)` Mappings rim:n/a v2:DR rim:IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"] v2:CX.7 + CX.8 rim:Role.effectiveTime or implied by context servd:./StartDate and ./EndDate
assigner	Σ I	0..1	Reference(UK Core Organization)	Element Id RelatedPerson.identifier.assigner Short description Organization that issued id (may be just text) Definition Organization that issued/manages the identifier. Comments The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. Data Type Reference(UK Core Organization) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1:SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim:n/a rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2:CX.4 / (CX.4,CX.9,CX.10) rim:II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd:./IdentifierIssuingAuthority
active	Σ ?!	0..1	boolean	There are no (further) constraints on this element Element Id RelatedPerson.active Short description Whether this related person's record is in active use Definition Whether this related person record is in active use. Requirements Need to be able to mark a related person record as not to be used, such as if it was created in error. Comments This element is labeled as a modifier because it may be used to mark that the resource was created in error. Data Type boolean Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a w5:FiveWs.status rim:.statusCode
patient	Σ I	1..1	Reference(UK Core Patient)	Element Id RelatedPerson.patient Short description The patient this person is related to Definition The patient this person is related to. Requirements We need to know which patient this RelatedPerson is related to. Comments References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository. Data Type Reference(UK Core Patient) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1:SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim:n/a rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2:PID-3 rim:scoper[classCode=PSN\|ANM and determinerCode='INSTANCE']/playedRole[classCode='PAT']/id
reference	Σ I	0..1	string	There are no (further) constraints on this element Element Id RelatedPerson.patient.reference Short description Literal reference, Relative, internal or absolute URL Definition A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources. Comments Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
type	Σ	0..1	uriBinding	There are no (further) constraints on this element Element Id RelatedPerson.patient.type Short description Type the reference refers to (e.g. "Patient") Definition The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent. The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources). Comments This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified. Data Type uri Binding Aa resource (or, for logical models, the URI of the logical model). ResourceType (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
identifier	Σ	0..1	Identifier	There are no (further) constraints on this element Element Id RelatedPerson.patient.identifier Short description Logical reference, when literal reference is not known Definition An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference. Comments When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it. Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation\|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any). Data Type Identifier Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CX / EI (occasionally, more often EI maps to a resource id or a URL) rim:II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd:Identifier rim:.identifier
use	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element Id RelatedPerson.patient.identifier.use Short description usual \| official \| temp \| secondary \| old (If known) Definition The purpose of this identifier. Requirements Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. Comments Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. Data Type code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:N/A rim:Role.code or implied by context
type	Σ	0..1	CodeableConceptBinding	There are no (further) constraints on this element Element Id RelatedPerson.patient.identifier.type Short description Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. Requirements Allows users to make use of identifiers when the identifier system is not known. Comments This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. Data Type CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE rim:CD orim:fhir:CodeableConcept rdfs:subClassOf dt:CD v2:CX.5 rim:Role.code or implied by context
system	Σ	0..1	uri	There are no (further) constraints on this element Element Id RelatedPerson.patient.identifier.system Short description The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique. Requirements There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. Comments Identifier.system is always case sensitive. Data Type uri Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General http://www.acme.com/identifiers/patient Mappings rim:n/a v2:CX.4 / EI-2-4 rim:II.root or Role.id.root servd:./IdentifierType
value	Σ	0..1	string	There are no (further) constraints on this element Element Id RelatedPerson.patient.identifier.value Short description The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system. Comments If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General 123456 Mappings rim:n/a v2:CX.1 / EI.1 rim:II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd:./Value
period	Σ I	0..1	Period	There are no (further) constraints on this element Element Id RelatedPerson.patient.identifier.period Short description Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use. Comments A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration. Data Type Period Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` per-1:If present, start SHALL have a lower value than end `start.hasValue().not() or end.hasValue().not() or (start <= end)` Mappings rim:n/a v2:DR rim:IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"] v2:CX.7 + CX.8 rim:Role.effectiveTime or implied by context servd:./StartDate and ./EndDate
assigner	Σ I	0..1	Reference(UK Core Organization)	Element Id RelatedPerson.patient.identifier.assigner Short description Organization that issued id (may be just text) Definition Organization that issued/manages the identifier. Comments The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. Data Type Reference(UK Core Organization) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1:SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim:n/a rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2:CX.4 / (CX.4,CX.9,CX.10) rim:II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd:./IdentifierIssuingAuthority
display	Σ	0..1	string	There are no (further) constraints on this element Element Id RelatedPerson.patient.display Short description Text alternative for the resource Definition Plain text narrative that identifies the resource in addition to the resource reference. Comments This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
relationship	Σ	0..*	CodeableConceptBinding	Element Id RelatedPerson.relationship Short description The nature of the relationship Definition The nature of the relationship between a patient and the related person. Requirements We need to know the relationship with the patient since it influences the interpretation of the information attributed to this person. Comments Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination. Data Type CodeableConcept Binding The nature of the relationship between a patient and the related person. UKCorePersonRelationshipType (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE rim:CD orim:fhir:CodeableConcept rdfs:subClassOf dt:CD w5:FiveWs.class v2:NK1-3 rim:code
name	Σ	0..*	HumanName	There are no (further) constraints on this element Element Id RelatedPerson.name Short description A name associated with the person Definition A name associated with the person. Requirements Related persons need to be identified by name, but it is uncommon to need details about multiple other names for that person. Comments Names may be changed, or repudiated, or people may have different names in different contexts. Names may be divided into parts of different type that have variable significance depending on context, though the division into parts does not always matter. With personal names, the different parts might or might not be imbued with some implicit meaning; various cultures associate different importance with the name parts and the degree to which systems must care about name parts around the world varies widely. Data Type HumanName Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:XPN rim:EN (actually, PN) servd:ProviderName v2:NK1-2 rim:name
telecom	Σ I	0..*	ContactPoint	There are no (further) constraints on this element Element Id RelatedPerson.telecom Short description A contact detail for the person Definition A contact detail for the person, e.g. a telephone number or an email address. Requirements People have (primary) ways to contact them in some way such as phone, email. Comments Person may have multiple ways to be contacted with different uses or applicable periods. May need to have options for contacting the person urgently, and also to help with identification. Data Type ContactPoint Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` cpt-2:A system is required if a value is provided. `value.empty() or system.exists()` Mappings rim:n/a v2:XTN rim:TEL servd:ContactPoint v2:NK1-5 / NK1-6 / NK1-40 rim:telecom
system	Σ I	0..1	codeBinding	There are no (further) constraints on this element Element Id RelatedPerson.telecom.system Short description phone \| fax \| email \| pager \| url \| sms \| other Definition Telecommunications form for contact point - what communications system is required to make use of the contact. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data Type code Binding Telecommunications form for contact point. ContactPointSystem (required) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:XTN.3 rim:./scheme servd:./ContactPointType
extension	I	0..*	Extension	Element Id RelatedPerson.telecom.system.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data Type Extension Sliced: Unordered, Open, by url(Value) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
otherContactSystem	I	0..1	Extension(Coding)	Element Id RelatedPerson.telecom.system.extension:otherContactSystem Short description Other contact system Alternate names extensions, user content Definition Other contact system value which extends the system element in the ContactPoint datatype. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data Type Extension(Coding) Extension URL https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-OtherContactSystem Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
value	Σ	0..1	string	There are no (further) constraints on this element Element Id RelatedPerson.telecom.value Short description The actual contact point details Definition The actual contact point details, in a form that is meaningful to the designated communication system (i.e. phone number or email address). Requirements Need to support legacy numbers that are not in a tightly controlled format. Comments Additional text data such as phone extension numbers, or notes about use of the contact are sometimes included in the value. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:XTN.1 (or XTN.12) rim:./url servd:./Value
use	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element Id RelatedPerson.telecom.use Short description home \| work \| temp \| old \| mobile - purpose of this contact point Definition Identifies the purpose for the contact point. Requirements Need to track the way a person uses this contact, so a user can choose which is appropriate for their purpose. Comments Applications can assume that a contact is current unless it explicitly says that it is temporary or old. Data Type code Binding Use of contact point. ContactPointUse (required) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:XTN.2 - but often indicated by field rim:unique(./use) servd:./ContactPointPurpose
rank	Σ	0..1	positiveInt	There are no (further) constraints on this element Element Id RelatedPerson.telecom.rank Short description Specify preferred order of use (1 = highest) Definition Specifies a preferred order in which to use a set of contacts. ContactPoints with lower rank values are more preferred than those with higher rank values. Comments Note that rank does not necessarily follow the order in which the contacts are represented in the instance. Data Type positiveInt Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:n/a
period	Σ I	0..1	Period	There are no (further) constraints on this element Element Id RelatedPerson.telecom.period Short description Time period when the contact point was/is in use Definition Time period when the contact point was/is in use. Comments A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration. Data Type Period Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` per-1:If present, start SHALL have a lower value than end `start.hasValue().not() or end.hasValue().not() or (start <= end)` Mappings rim:n/a v2:DR rim:IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"] v2:N/A rim:./usablePeriod[type="IVL<TS>"] servd:./StartDate and ./EndDate
gender	Σ	0..1	codeBinding	There are no (further) constraints on this element Element Id RelatedPerson.gender Short description male \| female \| other \| unknown Definition Administrative Gender - the gender that the person is considered to have for administration and record keeping purposes. Requirements Needed for identification of the person, in combination with (at least) name and birth date. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data Type code Binding The gender of a person used for administrative purposes. AdministrativeGender (required) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:NK1-15 rim:administrativeGender
birthDate	Σ	0..1	date	There are no (further) constraints on this element Element Id RelatedPerson.birthDate Short description The date on which the related person was born Definition The date on which the related person was born. Data Type date Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:player.birthTime
address	Σ	0..*	Address	There are no (further) constraints on this element Element Id RelatedPerson.address Short description Address where the related person can be contacted or visited Definition Address where the related person can be contacted or visited. Requirements Need to keep track where the related person can be contacted per postal mail or visited. Comments Note: address is intended to describe postal addresses for administrative purposes, not to describe absolute geographical coordinates. Postal addresses are often used as proxies for physical locations (also see the Location resource). Data Type Address Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:XAD rim:AD servd:Address v2:NK1-4 rim:addr
photo	I	0..*	Attachment	There are no (further) constraints on this element Element Id RelatedPerson.photo Short description Image of the person Definition Image of the person. Requirements Many EHR systems have the capability to capture an image of persons. Fits with newer social media usage too. Comments When providing a summary view (for example with Observation.value[x]) Attachment should be represented with a brief display text such as "Signed Procedure Consent". Data Type Attachment Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` att-1:If the Attachment has data, it SHALL have a contentType `data.empty() or contentType.exists()` Mappings rim:n/a v2:ED/RP rim:ED v2:OBX-5 - needs a profile rim:player[classCode='PSN' and determinerCode='INSTANCE']/desc
period	I	0..1	Period	There are no (further) constraints on this element Element Id RelatedPerson.period Short description Period of time that this relationship is considered valid Definition The period of time during which this relationship is or was active. If there are no dates defined, then the interval is unknown. Comments A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration. Data Type Period Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` per-1:If present, start SHALL have a lower value than end `start.hasValue().not() or end.hasValue().not() or (start <= end)` Mappings rim:n/a v2:DR rim:IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"] w5:FiveWs.done[x] rim:.effectiveTime
communication		0..*	BackboneElement	There are no (further) constraints on this element Element Id RelatedPerson.communication Short description A language which may be used to communicate with about the patient's health Definition A language which may be used to communicate with about the patient's health. Requirements If a related person does not speak the local language, interpreters may be required, so languages spoken and proficiency is an important things to keep track of both for patient and other persons of interest. Comments If no language is specified, this implies that the default local language is spoken. If you need to convey proficiency for multiple modes, then you need multiple RelatedPerson.Communication associations. If the RelatedPerson does not speak the default local language, then the Interpreter Required Standard can be used to explicitly declare that an interpreter is required. Data Type BackboneElement Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:LanguageCommunication
language		1..1	CodeableConceptBinding	There are no (further) constraints on this element Element Id RelatedPerson.communication.language Short description The language which can be used to communicate with the patient about his or her health Definition The ISO-639-1 alpha 2 code in lower case for the language, optionally followed by a hyphen and the ISO-3166-1 alpha 2 code for the region in upper case; e.g. "en" for English, or "en-US" for American English versus "en-EN" for England English. Requirements Most systems in multilingual countries will want to convey language. Not all systems actually need the regional dialect. Comments The structure aa-BB with this exact casing is one the most widely used notations for locale. However not all systems actually code this but instead have it as free text. Hence CodeableConcept instead of code as the data type. Data Type CodeableConcept Binding A human language. CommonLanguages (preferred) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE rim:CD orim:fhir:CodeableConcept rdfs:subClassOf dt:CD rim:player[classCode=PSN\|ANM and determinerCode=INSTANCE]/languageCommunication/code
preferred		0..1	boolean	There are no (further) constraints on this element Element Id RelatedPerson.communication.preferred Short description Language preference indicator Definition Indicates whether or not the patient prefers this language (over other languages he masters up a certain level). Requirements People that master multiple languages up to certain level may prefer one or more, i.e. feel more confident in communicating in a particular language making other languages sort of a fall back method. Comments This language is specifically identified for communicating healthcare information. Data Type boolean Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:preferenceInd

Hybrid View

RelatedPerson	I		RelatedPerson	There are no (further) constraints on this element Element Id RelatedPerson Short description A person that is related to a patient, but who is not a direct target of care Definition Information about a person that is involved in the care for a patient, but who is not the target of healthcare, nor has a formal responsibility in the care process. Data Type RelatedPerson Constraints dom-2:If the resource is contained in another resource, it SHALL NOT contain nested Resources `contained.contained.empty()` dom-4:If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated `contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()` dom-3:If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource `contained.where((('#'+id in (%resource.descendants().reference \| %resource.descendants().as(canonical) \| %resource.descendants().as(uri) \| %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty()` dom-6:A resource should have narrative for robust management text.`div`.exists() dom-5:If a resource is contained in another resource, it SHALL NOT have a security label `contained.meta.security.empty()` Mappings rim:Entity. Role, or Act rim:role
extension	I	0..*	Extension	Element Id RelatedPerson.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data Type Extension Sliced: Unordered, Open, by url(Value) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
contactPreference	I	0..1	Extension(Complex)	Element Id RelatedPerson.extension:contactPreference Short description The preferred method of contact, contact times and written communication format given by a Patient or Related Person. Alternate names extensions, user content Definition The preferred method of contact, contact times and written communication format given by a Patient or Related Person. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data Type Extension(Complex) Extension URL https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-ContactPreference Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
contactRank	I	0..1	Extension(positiveInt)	Element Id RelatedPerson.extension:contactRank Short description Preferred ranking or order of contact applied to a contact on a patient's contact list Alternate names extensions, user content Definition The preferred ranking or order of contact applied to a contact on a patient's contact list. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data Type Extension(positiveInt) Extension URL https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-ContactRank Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
copyCorrespondenceIndicator	I	0..1	Extension(boolean)	Element Id RelatedPerson.extension:copyCorrespondenceIndicator Short description Indicator showing that a patient's contact or related person must be copied in to patient correspondence Alternate names extensions, user content Definition Extension carrying a boolean indicator showing that a patient's contact or related person must be copied in to patient correspondence. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data Type Extension(boolean) Extension URL https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-CopyCorrespondenceIndicator Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
identifier	Σ	0..*	Identifier	There are no (further) constraints on this element Element Id RelatedPerson.identifier Short description A human identifier for this person Definition Identifier for a person within a particular scope. Requirements People are known by a variety of ids. Some institutions maintain several, and most collect identifiers for exchange with other organizations concerning the patient. Examples are national person identifier and local identifier. Data Type Identifier Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CX / EI (occasionally, more often EI maps to a resource id or a URL) rim:II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd:Identifier w5:FiveWs.identifier v2:NK1-33 rim:.id
use	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element Id RelatedPerson.identifier.use Short description usual \| official \| temp \| secondary \| old (If known) Definition The purpose of this identifier. Requirements Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. Comments Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. Data Type code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:N/A rim:Role.code or implied by context
type	Σ	0..1	CodeableConceptBinding	There are no (further) constraints on this element Element Id RelatedPerson.identifier.type Short description Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. Requirements Allows users to make use of identifiers when the identifier system is not known. Comments This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. Data Type CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE rim:CD orim:fhir:CodeableConcept rdfs:subClassOf dt:CD v2:CX.5 rim:Role.code or implied by context
system	Σ	0..1	uri	There are no (further) constraints on this element Element Id RelatedPerson.identifier.system Short description The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique. Requirements There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. Comments Identifier.system is always case sensitive. Data Type uri Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General http://www.acme.com/identifiers/patient Mappings rim:n/a v2:CX.4 / EI-2-4 rim:II.root or Role.id.root servd:./IdentifierType
value	Σ	0..1	string	There are no (further) constraints on this element Element Id RelatedPerson.identifier.value Short description The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system. Comments If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General 123456 Mappings rim:n/a v2:CX.1 / EI.1 rim:II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd:./Value
period	Σ I	0..1	Period	There are no (further) constraints on this element Element Id RelatedPerson.identifier.period Short description Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use. Comments A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration. Data Type Period Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` per-1:If present, start SHALL have a lower value than end `start.hasValue().not() or end.hasValue().not() or (start <= end)` Mappings rim:n/a v2:DR rim:IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"] v2:CX.7 + CX.8 rim:Role.effectiveTime or implied by context servd:./StartDate and ./EndDate
assigner	Σ I	0..1	Reference(UK Core Organization)	Element Id RelatedPerson.identifier.assigner Short description Organization that issued id (may be just text) Definition Organization that issued/manages the identifier. Comments The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. Data Type Reference(UK Core Organization) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1:SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim:n/a rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2:CX.4 / (CX.4,CX.9,CX.10) rim:II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd:./IdentifierIssuingAuthority
active	Σ ?!	0..1	boolean	There are no (further) constraints on this element Element Id RelatedPerson.active Short description Whether this related person's record is in active use Definition Whether this related person record is in active use. Requirements Need to be able to mark a related person record as not to be used, such as if it was created in error. Comments This element is labeled as a modifier because it may be used to mark that the resource was created in error. Data Type boolean Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a w5:FiveWs.status rim:.statusCode
patient	Σ I	1..1	Reference(UK Core Patient)	Element Id RelatedPerson.patient Short description The patient this person is related to Definition The patient this person is related to. Requirements We need to know which patient this RelatedPerson is related to. Comments References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository. Data Type Reference(UK Core Patient) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1:SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim:n/a rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2:PID-3 rim:scoper[classCode=PSN\|ANM and determinerCode='INSTANCE']/playedRole[classCode='PAT']/id
reference	Σ I	0..1	string	There are no (further) constraints on this element Element Id RelatedPerson.patient.reference Short description Literal reference, Relative, internal or absolute URL Definition A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources. Comments Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
type	Σ	0..1	uriBinding	There are no (further) constraints on this element Element Id RelatedPerson.patient.type Short description Type the reference refers to (e.g. "Patient") Definition The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent. The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources). Comments This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified. Data Type uri Binding Aa resource (or, for logical models, the URI of the logical model). ResourceType (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
identifier	Σ	0..1	Identifier	There are no (further) constraints on this element Element Id RelatedPerson.patient.identifier Short description Logical reference, when literal reference is not known Definition An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference. Comments When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it. Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation\|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any). Data Type Identifier Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CX / EI (occasionally, more often EI maps to a resource id or a URL) rim:II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd:Identifier rim:.identifier
use	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element Id RelatedPerson.patient.identifier.use Short description usual \| official \| temp \| secondary \| old (If known) Definition The purpose of this identifier. Requirements Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. Comments Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. Data Type code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:N/A rim:Role.code or implied by context
type	Σ	0..1	CodeableConceptBinding	There are no (further) constraints on this element Element Id RelatedPerson.patient.identifier.type Short description Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. Requirements Allows users to make use of identifiers when the identifier system is not known. Comments This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. Data Type CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE rim:CD orim:fhir:CodeableConcept rdfs:subClassOf dt:CD v2:CX.5 rim:Role.code or implied by context
system	Σ	0..1	uri	There are no (further) constraints on this element Element Id RelatedPerson.patient.identifier.system Short description The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique. Requirements There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. Comments Identifier.system is always case sensitive. Data Type uri Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General http://www.acme.com/identifiers/patient Mappings rim:n/a v2:CX.4 / EI-2-4 rim:II.root or Role.id.root servd:./IdentifierType
value	Σ	0..1	string	There are no (further) constraints on this element Element Id RelatedPerson.patient.identifier.value Short description The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system. Comments If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General 123456 Mappings rim:n/a v2:CX.1 / EI.1 rim:II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd:./Value
period	Σ I	0..1	Period	There are no (further) constraints on this element Element Id RelatedPerson.patient.identifier.period Short description Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use. Comments A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration. Data Type Period Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` per-1:If present, start SHALL have a lower value than end `start.hasValue().not() or end.hasValue().not() or (start <= end)` Mappings rim:n/a v2:DR rim:IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"] v2:CX.7 + CX.8 rim:Role.effectiveTime or implied by context servd:./StartDate and ./EndDate
assigner	Σ I	0..1	Reference(UK Core Organization)	Element Id RelatedPerson.patient.identifier.assigner Short description Organization that issued id (may be just text) Definition Organization that issued/manages the identifier. Comments The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. Data Type Reference(UK Core Organization) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1:SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim:n/a rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2:CX.4 / (CX.4,CX.9,CX.10) rim:II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd:./IdentifierIssuingAuthority
display	Σ	0..1	string	There are no (further) constraints on this element Element Id RelatedPerson.patient.display Short description Text alternative for the resource Definition Plain text narrative that identifies the resource in addition to the resource reference. Comments This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
relationship	Σ	0..*	CodeableConceptBinding	Element Id RelatedPerson.relationship Short description The nature of the relationship Definition The nature of the relationship between a patient and the related person. Requirements We need to know the relationship with the patient since it influences the interpretation of the information attributed to this person. Comments Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination. Data Type CodeableConcept Binding The nature of the relationship between a patient and the related person. UKCorePersonRelationshipType (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE rim:CD orim:fhir:CodeableConcept rdfs:subClassOf dt:CD w5:FiveWs.class v2:NK1-3 rim:code
name	Σ	0..*	HumanName	There are no (further) constraints on this element Element Id RelatedPerson.name Short description A name associated with the person Definition A name associated with the person. Requirements Related persons need to be identified by name, but it is uncommon to need details about multiple other names for that person. Comments Names may be changed, or repudiated, or people may have different names in different contexts. Names may be divided into parts of different type that have variable significance depending on context, though the division into parts does not always matter. With personal names, the different parts might or might not be imbued with some implicit meaning; various cultures associate different importance with the name parts and the degree to which systems must care about name parts around the world varies widely. Data Type HumanName Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:XPN rim:EN (actually, PN) servd:ProviderName v2:NK1-2 rim:name
telecom	Σ I	0..*	ContactPoint	There are no (further) constraints on this element Element Id RelatedPerson.telecom Short description A contact detail for the person Definition A contact detail for the person, e.g. a telephone number or an email address. Requirements People have (primary) ways to contact them in some way such as phone, email. Comments Person may have multiple ways to be contacted with different uses or applicable periods. May need to have options for contacting the person urgently, and also to help with identification. Data Type ContactPoint Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` cpt-2:A system is required if a value is provided. `value.empty() or system.exists()` Mappings rim:n/a v2:XTN rim:TEL servd:ContactPoint v2:NK1-5 / NK1-6 / NK1-40 rim:telecom
system	Σ I	0..1	codeBinding	There are no (further) constraints on this element Element Id RelatedPerson.telecom.system Short description phone \| fax \| email \| pager \| url \| sms \| other Definition Telecommunications form for contact point - what communications system is required to make use of the contact. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data Type code Binding Telecommunications form for contact point. ContactPointSystem (required) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:XTN.3 rim:./scheme servd:./ContactPointType
extension	I	0..*	Extension	Element Id RelatedPerson.telecom.system.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data Type Extension Sliced: Unordered, Open, by url(Value) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
otherContactSystem	I	0..1	Extension(Coding)	Element Id RelatedPerson.telecom.system.extension:otherContactSystem Short description Other contact system Alternate names extensions, user content Definition Other contact system value which extends the system element in the ContactPoint datatype. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data Type Extension(Coding) Extension URL https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-OtherContactSystem Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
value	Σ	0..1	string	There are no (further) constraints on this element Element Id RelatedPerson.telecom.value Short description The actual contact point details Definition The actual contact point details, in a form that is meaningful to the designated communication system (i.e. phone number or email address). Requirements Need to support legacy numbers that are not in a tightly controlled format. Comments Additional text data such as phone extension numbers, or notes about use of the contact are sometimes included in the value. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:XTN.1 (or XTN.12) rim:./url servd:./Value
use	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element Id RelatedPerson.telecom.use Short description home \| work \| temp \| old \| mobile - purpose of this contact point Definition Identifies the purpose for the contact point. Requirements Need to track the way a person uses this contact, so a user can choose which is appropriate for their purpose. Comments Applications can assume that a contact is current unless it explicitly says that it is temporary or old. Data Type code Binding Use of contact point. ContactPointUse (required) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:XTN.2 - but often indicated by field rim:unique(./use) servd:./ContactPointPurpose
rank	Σ	0..1	positiveInt	There are no (further) constraints on this element Element Id RelatedPerson.telecom.rank Short description Specify preferred order of use (1 = highest) Definition Specifies a preferred order in which to use a set of contacts. ContactPoints with lower rank values are more preferred than those with higher rank values. Comments Note that rank does not necessarily follow the order in which the contacts are represented in the instance. Data Type positiveInt Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:n/a
period	Σ I	0..1	Period	There are no (further) constraints on this element Element Id RelatedPerson.telecom.period Short description Time period when the contact point was/is in use Definition Time period when the contact point was/is in use. Comments A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration. Data Type Period Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` per-1:If present, start SHALL have a lower value than end `start.hasValue().not() or end.hasValue().not() or (start <= end)` Mappings rim:n/a v2:DR rim:IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"] v2:N/A rim:./usablePeriod[type="IVL<TS>"] servd:./StartDate and ./EndDate
gender	Σ	0..1	codeBinding	There are no (further) constraints on this element Element Id RelatedPerson.gender Short description male \| female \| other \| unknown Definition Administrative Gender - the gender that the person is considered to have for administration and record keeping purposes. Requirements Needed for identification of the person, in combination with (at least) name and birth date. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data Type code Binding The gender of a person used for administrative purposes. AdministrativeGender (required) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:NK1-15 rim:administrativeGender
birthDate	Σ	0..1	date	There are no (further) constraints on this element Element Id RelatedPerson.birthDate Short description The date on which the related person was born Definition The date on which the related person was born. Data Type date Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:player.birthTime
address	Σ	0..*	Address	There are no (further) constraints on this element Element Id RelatedPerson.address Short description Address where the related person can be contacted or visited Definition Address where the related person can be contacted or visited. Requirements Need to keep track where the related person can be contacted per postal mail or visited. Comments Note: address is intended to describe postal addresses for administrative purposes, not to describe absolute geographical coordinates. Postal addresses are often used as proxies for physical locations (also see the Location resource). Data Type Address Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:XAD rim:AD servd:Address v2:NK1-4 rim:addr
photo	I	0..*	Attachment	There are no (further) constraints on this element Element Id RelatedPerson.photo Short description Image of the person Definition Image of the person. Requirements Many EHR systems have the capability to capture an image of persons. Fits with newer social media usage too. Comments When providing a summary view (for example with Observation.value[x]) Attachment should be represented with a brief display text such as "Signed Procedure Consent". Data Type Attachment Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` att-1:If the Attachment has data, it SHALL have a contentType `data.empty() or contentType.exists()` Mappings rim:n/a v2:ED/RP rim:ED v2:OBX-5 - needs a profile rim:player[classCode='PSN' and determinerCode='INSTANCE']/desc
period	I	0..1	Period	There are no (further) constraints on this element Element Id RelatedPerson.period Short description Period of time that this relationship is considered valid Definition The period of time during which this relationship is or was active. If there are no dates defined, then the interval is unknown. Comments A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration. Data Type Period Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` per-1:If present, start SHALL have a lower value than end `start.hasValue().not() or end.hasValue().not() or (start <= end)` Mappings rim:n/a v2:DR rim:IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"] w5:FiveWs.done[x] rim:.effectiveTime
communication		0..*	BackboneElement	There are no (further) constraints on this element Element Id RelatedPerson.communication Short description A language which may be used to communicate with about the patient's health Definition A language which may be used to communicate with about the patient's health. Requirements If a related person does not speak the local language, interpreters may be required, so languages spoken and proficiency is an important things to keep track of both for patient and other persons of interest. Comments If no language is specified, this implies that the default local language is spoken. If you need to convey proficiency for multiple modes, then you need multiple RelatedPerson.Communication associations. If the RelatedPerson does not speak the default local language, then the Interpreter Required Standard can be used to explicitly declare that an interpreter is required. Data Type BackboneElement Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:LanguageCommunication
language		1..1	CodeableConceptBinding	There are no (further) constraints on this element Element Id RelatedPerson.communication.language Short description The language which can be used to communicate with the patient about his or her health Definition The ISO-639-1 alpha 2 code in lower case for the language, optionally followed by a hyphen and the ISO-3166-1 alpha 2 code for the region in upper case; e.g. "en" for English, or "en-US" for American English versus "en-EN" for England English. Requirements Most systems in multilingual countries will want to convey language. Not all systems actually need the regional dialect. Comments The structure aa-BB with this exact casing is one the most widely used notations for locale. However not all systems actually code this but instead have it as free text. Hence CodeableConcept instead of code as the data type. Data Type CodeableConcept Binding A human language. CommonLanguages (preferred) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE rim:CD orim:fhir:CodeableConcept rdfs:subClassOf dt:CD rim:player[classCode=PSN\|ANM and determinerCode=INSTANCE]/languageCommunication/code
preferred		0..1	boolean	There are no (further) constraints on this element Element Id RelatedPerson.communication.preferred Short description Language preference indicator Definition Indicates whether or not the patient prefers this language (over other languages he masters up a certain level). Requirements People that master multiple languages up to certain level may prefer one or more, i.e. feel more confident in communicating in a particular language making other languages sort of a fall back method. Comments This language is specifically identified for communicating healthcare information. Data Type boolean Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:preferenceInd

Table View

RelatedPerson		..
RelatedPerson.extension		0..
RelatedPerson.extension	Extension	0..
RelatedPerson.extension	Extension	0..
RelatedPerson.extension	Extension	0..
RelatedPerson.identifier		..
RelatedPerson.identifier.assigner	Reference(UK Core Organization)	..
RelatedPerson.patient	Reference(UK Core Patient)	..
RelatedPerson.patient.identifier		..
RelatedPerson.patient.identifier.assigner	Reference(UK Core Organization)	..
RelatedPerson.relationship		..
RelatedPerson.telecom		..
RelatedPerson.telecom.system		..
RelatedPerson.telecom.system.extension		0..
RelatedPerson.telecom.system.extension	Extension	0..

XML View

<StructureDefinition xmlns="http://hl7.org/fhir">
    <id value="UKCore-RelatedPerson" />
    <url value="https://fhir.hl7.org.uk/StructureDefinition/UKCore-RelatedPerson" />
    <version value="2.3.0" />
    <name value="UKCoreRelatedPerson" />
    <title value="UK Core RelatedPerson" />
    <status value="active" />
    <date value="2022-03-01" />
    <publisher value="HL7 UK" />
    <contact>
        <name value="HL7 UK" />
        <telecom>
            <system value="email" />
            <value value="secretariat@hl7.org.uk" />
            <use value="work" />
            <rank value="1" />
        </telecom>
    </contact>
    <contact>
        <name value="NHS Digital" />
        <telecom>
            <system value="email" />
            <value value="interoperabilityteam@nhs.net" />
            <use value="work" />
            <rank value="2" />
        </telecom>
    </contact>
    <description value="Defines the UK Core constraints and extensions on the RelatedPerson resource for the minimal set of data to query and retrieve related person information." />
    <purpose value="This profile allows exchange of information about a person that is involved in the care for an individual, but who is not the target of healthcare, nor has a formal responsibility in the care process." />
    <copyright value="Copyright &#169; 2021+ HL7 UK Licensed under the Apache License, Version 2.0 (the &quot;License&quot;); you may not use this file except in compliance with the License. You may obtain a copy of the License at  http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an &quot;AS IS&quot; BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. HL7&#174; FHIR&#174; standard Copyright &#169; 2011+ HL7 The HL7&#174; FHIR&#174; standard is used under the FHIR license. You may obtain a copy of the FHIR license at  https://www.hl7.org/fhir/license.html." />
    <fhirVersion value="4.0.1" />
    <mapping>
        <identity value="rim" />
        <uri value="http://hl7.org/v3" />
        <name value="RIM Mapping" />
    </mapping>
    <mapping>
        <identity value="w5" />
        <uri value="http://hl7.org/fhir/fivews" />
        <name value="FiveWs Pattern Mapping" />
    </mapping>
    <mapping>
        <identity value="v2" />
        <uri value="http://hl7.org/v2" />
        <name value="HL7 v2 Mapping" />
    </mapping>
    <kind value="resource" />
    <abstract value="false" />
    <type value="RelatedPerson" />
    <baseDefinition value="http://hl7.org/fhir/StructureDefinition/RelatedPerson" />
    <derivation value="constraint" />
    <differential>
        <element id="RelatedPerson.extension">
            <path value="RelatedPerson.extension" />
            <slicing>
                <discriminator>
                    <type value="value" />
                    <path value="url" />
                </discriminator>
                <rules value="open" />
            </slicing>
            <min value="0" />
        </element>
        <element id="RelatedPerson.extension:contactPreference">
            <path value="RelatedPerson.extension" />
            <sliceName value="contactPreference" />
            <min value="0" />
            <type>
                <code value="Extension" />
                <profile value="https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-ContactPreference" />
            </type>
        </element>
        <element id="RelatedPerson.extension:contactRank">
            <path value="RelatedPerson.extension" />
            <sliceName value="contactRank" />
            <min value="0" />
            <type>
                <code value="Extension" />
                <profile value="https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-ContactRank" />
            </type>
        </element>
        <element id="RelatedPerson.extension:copyCorrespondenceIndicator">
            <path value="RelatedPerson.extension" />
            <sliceName value="copyCorrespondenceIndicator" />
            <min value="0" />
            <type>
                <code value="Extension" />
                <profile value="https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-CopyCorrespondenceIndicator" />
            </type>
        </element>
        <element id="RelatedPerson.identifier.assigner">
            <path value="RelatedPerson.identifier.assigner" />
            <type>
                <code value="Reference" />
                <targetProfile value="https://fhir.hl7.org.uk/StructureDefinition/UKCore-Organization" />
            </type>
        </element>
        <element id="RelatedPerson.patient">
            <path value="RelatedPerson.patient" />
            <type>
                <code value="Reference" />
                <targetProfile value="https://fhir.hl7.org.uk/StructureDefinition/UKCore-Patient" />
            </type>
        </element>
        <element id="RelatedPerson.patient.identifier.assigner">
            <path value="RelatedPerson.patient.identifier.assigner" />
            <type>
                <code value="Reference" />
                <targetProfile value="https://fhir.hl7.org.uk/StructureDefinition/UKCore-Organization" />
            </type>
        </element>
        <element id="RelatedPerson.relationship">
            <path value="RelatedPerson.relationship" />
            <binding>
                <strength value="extensible" />
                <valueSet value="https://fhir.hl7.org.uk/ValueSet/UKCore-PersonRelationshipType" />
            </binding>
        </element>
        <element id="RelatedPerson.telecom.system.extension">
            <path value="RelatedPerson.telecom.system.extension" />
            <slicing>
                <discriminator>
                    <type value="value" />
                    <path value="url" />
                </discriminator>
                <rules value="open" />
            </slicing>
            <min value="0" />
        </element>
        <element id="RelatedPerson.telecom.system.extension:otherContactSystem">
            <path value="RelatedPerson.telecom.system.extension" />
            <sliceName value="otherContactSystem" />
            <min value="0" />
            <type>
                <code value="Extension" />
                <profile value="https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-OtherContactSystem" />
            </type>
        </element>
    </differential>
</StructureDefinition>

JSON View

{
    "resourceType": "StructureDefinition",
    "id": "UKCore-RelatedPerson",
    "url": "https://fhir.hl7.org.uk/StructureDefinition/UKCore-RelatedPerson",
    "version": "2.3.0",
    "name": "UKCoreRelatedPerson",
    "title": "UK Core RelatedPerson",
    "status": "active",
    "date": "2022-03-01",
    "publisher": "HL7 UK",
    "contact":  [
        {
            "name": "HL7 UK",
            "telecom":  [
                {
                    "system": "email",
                    "value": "secretariat@hl7.org.uk",
                    "use": "work",
                    "rank": 1
                }
            ]
        },
        {
            "name": "NHS Digital",
            "telecom":  [
                {
                    "system": "email",
                    "value": "interoperabilityteam@nhs.net",
                    "use": "work",
                    "rank": 2
                }
            ]
        }
    ],
    "description": "Defines the UK Core constraints and extensions on the RelatedPerson resource for the minimal set of data to query and retrieve related person information.",
    "purpose": "This profile allows exchange of information about a person that is involved in the care for an individual, but who is not the target of healthcare, nor has a formal responsibility in the care process.",
    "copyright": "Copyright © 2021+ HL7 UK Licensed under the Apache License, Version 2.0 (the \"License\"); you may not use this file except in compliance with the License. You may obtain a copy of the License at  http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an \"AS IS\" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. HL7® FHIR® standard Copyright © 2011+ HL7 The HL7® FHIR® standard is used under the FHIR license. You may obtain a copy of the FHIR license at  https://www.hl7.org/fhir/license.html.",
    "fhirVersion": "4.0.1",
    "mapping":  [
        {
            "identity": "rim",
            "uri": "http://hl7.org/v3",
            "name": "RIM Mapping"
        },
        {
            "identity": "w5",
            "uri": "http://hl7.org/fhir/fivews",
            "name": "FiveWs Pattern Mapping"
        },
        {
            "identity": "v2",
            "uri": "http://hl7.org/v2",
            "name": "HL7 v2 Mapping"
        }
    ],
    "kind": "resource",
    "abstract": false,
    "type": "RelatedPerson",
    "baseDefinition": "http://hl7.org/fhir/StructureDefinition/RelatedPerson",
    "derivation": "constraint",
    "differential": {
        "element":  [
            {
                "id": "RelatedPerson.extension",
                "path": "RelatedPerson.extension",
                "slicing": {
                    "discriminator":  [
                        {
                            "type": "value",
                            "path": "url"
                        }
                    ],
                    "rules": "open"
                },
                "min": 0
            },
            {
                "id": "RelatedPerson.extension:contactPreference",
                "path": "RelatedPerson.extension",
                "sliceName": "contactPreference",
                "min": 0,
                "type":  [
                    {
                        "code": "Extension",
                        "profile":  [
                            "https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-ContactPreference"
                        ]
                    }
                ]
            },
            {
                "id": "RelatedPerson.extension:contactRank",
                "path": "RelatedPerson.extension",
                "sliceName": "contactRank",
                "min": 0,
                "type":  [
                    {
                        "code": "Extension",
                        "profile":  [
                            "https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-ContactRank"
                        ]
                    }
                ]
            },
            {
                "id": "RelatedPerson.extension:copyCorrespondenceIndicator",
                "path": "RelatedPerson.extension",
                "sliceName": "copyCorrespondenceIndicator",
                "min": 0,
                "type":  [
                    {
                        "code": "Extension",
                        "profile":  [
                            "https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-CopyCorrespondenceIndicator"
                        ]
                    }
                ]
            },
            {
                "id": "RelatedPerson.identifier.assigner",
                "path": "RelatedPerson.identifier.assigner",
                "type":  [
                    {
                        "code": "Reference",
                        "targetProfile":  [
                            "https://fhir.hl7.org.uk/StructureDefinition/UKCore-Organization"
                        ]
                    }
                ]
            },
            {
                "id": "RelatedPerson.patient",
                "path": "RelatedPerson.patient",
                "type":  [
                    {
                        "code": "Reference",
                        "targetProfile":  [
                            "https://fhir.hl7.org.uk/StructureDefinition/UKCore-Patient"
                        ]
                    }
                ]
            },
            {
                "id": "RelatedPerson.patient.identifier.assigner",
                "path": "RelatedPerson.patient.identifier.assigner",
                "type":  [
                    {
                        "code": "Reference",
                        "targetProfile":  [
                            "https://fhir.hl7.org.uk/StructureDefinition/UKCore-Organization"
                        ]
                    }
                ]
            },
            {
                "id": "RelatedPerson.relationship",
                "path": "RelatedPerson.relationship",
                "binding": {
                    "strength": "extensible",
                    "valueSet": "https://fhir.hl7.org.uk/ValueSet/UKCore-PersonRelationshipType"
                }
            },
            {
                "id": "RelatedPerson.telecom.system.extension",
                "path": "RelatedPerson.telecom.system.extension",
                "slicing": {
                    "discriminator":  [
                        {
                            "type": "value",
                            "path": "url"
                        }
                    ],
                    "rules": "open"
                },
                "min": 0
            },
            {
                "id": "RelatedPerson.telecom.system.extension:otherContactSystem",
                "path": "RelatedPerson.telecom.system.extension",
                "sliceName": "otherContactSystem",
                "min": 0,
                "type":  [
                    {
                        "code": "Extension",
                        "profile":  [
                            "https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-OtherContactSystem"
                        ]
                    }
                ]
            }
        ]
    }
}

Examples

Example UKCore-RelatedPerson

Example Usage Scenarios

The following are example usage scenarios for the UK Core RelatedPerson profile:

Query for related person information for a given Patient
Exchange related person information within a FHIR document or message.

Profile specific implementation guidance:

extension:contactPreference

More information about this extension can be found using the link below.

Extension UKCore-ContactPreference.

extension:contactRank

More information about this extension can be found using the link below.

Extension UKCore-ContactRank.

extension:copyCorrespondenceIndicator

More information about this extension can be found using the link below.

Extension UKCore-CopyCorrespondenceIndicator.

`identifier`

A human identifier for this person. Although related persons can be identified using NHS Numbers, third party NHS numbers are not normally used in patient records. For this reason, the use of this identifier for a related person is dependant on the use case.

`active`

Whether this related person's record is in active use.

`patient`

The patient this person is related to. The resource being referenced should conform to the following:

Profile UKCore-Patient

`relationship`

The nature of the relationship using a code from ValueSet UKCore-PersonRelationshipType.

`name`

A name associated with the person using HumanName data type.

`telecom`

A contact detail for the person using the ContactPoint data type.

`gender`

Administrative Gender - the gender that the related person is considered to have for administration and record keeping purposes.

Important:

This is a FHIR required ValueSet and these values MUST be exchanged. Implementers should map these values to any local values used.

HTML View

This code system http://hl7.org/fhir/administrative-gender defines the following codes:

Code	Display	Definition
male	Male	Male.
female	Female	Female.
other	Other	Other.
unknown	Unknown	Unknown.

Table View

CodeSystem.id[0]	administrative-gender
CodeSystem.meta[0].lastUpdated[0]	2019-11-01T09:29:23.356+11:00
CodeSystem.extension[0].url[0]	http://hl7.org/fhir/StructureDefinition/structuredefinition-wg
CodeSystem.extension[0].valueCode[0]	pa
CodeSystem.extension[1].url[0]	http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status
CodeSystem.extension[1].valueCode[0]	normative
CodeSystem.extension[2].url[0]	http://hl7.org/fhir/StructureDefinition/structuredefinition-fmm
CodeSystem.extension[2].valueInteger[0]	5
CodeSystem.extension[3].url[0]	http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version
CodeSystem.extension[3].valueCode[0]	4.0.0
CodeSystem.url[0]	http://hl7.org/fhir/administrative-gender
CodeSystem.identifier[0].system[0]	urn:ietf:rfc:3986
CodeSystem.identifier[0].value[0]	urn:oid:2.16.840.1.113883.4.642.4.2
CodeSystem.version[0]	4.0.1
CodeSystem.name[0]	AdministrativeGender
CodeSystem.title[0]	AdministrativeGender
CodeSystem.status[0]	active
CodeSystem.experimental[0]	False
CodeSystem.date[0]	2019-11-01T09:29:23+11:00
CodeSystem.description[0]	The gender of a person used for administrative purposes.
CodeSystem.caseSensitive[0]	True
CodeSystem.valueSet[0]	http://hl7.org/fhir/ValueSet/administrative-gender
CodeSystem.content[0]	complete
CodeSystem.concept[0].extension[0].url[0]	http://hl7.org/fhir/StructureDefinition/codesystem-concept-comments
CodeSystem.concept[0].extension[0].valueString[0]	Male
CodeSystem.concept[0].code[0]	male
CodeSystem.concept[0].display[0]	Male
CodeSystem.concept[0].definition[0]	Male.
CodeSystem.concept[1].extension[0].url[0]	http://hl7.org/fhir/StructureDefinition/codesystem-concept-comments
CodeSystem.concept[1].extension[0].valueString[0]	Female
CodeSystem.concept[1].code[0]	female
CodeSystem.concept[1].display[0]	Female
CodeSystem.concept[1].definition[0]	Female.
CodeSystem.concept[2].extension[0].url[0]	http://hl7.org/fhir/StructureDefinition/codesystem-concept-comments
CodeSystem.concept[2].extension[0].valueString[0]	The administrative gender is a value other than male/female/unknown. Where this value is selected, systems may often choose to include an extension with the localized more specific value.
CodeSystem.concept[2].code[0]	other
CodeSystem.concept[2].display[0]	Other
CodeSystem.concept[2].definition[0]	Other.
CodeSystem.concept[3].extension[0].url[0]	http://hl7.org/fhir/StructureDefinition/codesystem-concept-comments
CodeSystem.concept[3].extension[0].valueString[0]	A proper value is applicable, but not known. Usage Notes: This means the actual value is not known. If the only thing that is unknown is how to properly express the value in the necessary constraints (value set, datatype, etc.), then the OTH or UNC flavor should be used. No properties should be included for a datatype with this property unless: Those properties themselves directly translate to a semantic of "unknown". (E.g. a local code sent as a translation that conveys 'unknown') Those properties further qualify the nature of what is unknown. (E.g. specifying a use code of "H" and a URL prefix of "tel:" to convey that it is the home phone number that is unknown.)
CodeSystem.concept[3].code[0]	unknown
CodeSystem.concept[3].display[0]	Unknown
CodeSystem.concept[3].definition[0]	Unknown.

XML View

<CodeSystem xmlns="http://hl7.org/fhir">
    <id value="administrative-gender" />
    <meta>
        <lastUpdated value="2019-11-01T09:29:23.356+11:00" />
    </meta>
    <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-wg">
        <valueCode value="pa" />
    </extension>
    <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status">
        <valueCode value="normative" />
    </extension>
    <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fmm">
        <valueInteger value="5" />
    </extension>
    <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version">
        <valueCode value="4.0.0" />
    </extension>
    <url value="http://hl7.org/fhir/administrative-gender" />
    <identifier>
        <system value="urn:ietf:rfc:3986" />
        <value value="urn:oid:2.16.840.1.113883.4.642.4.2" />
    </identifier>
    <version value="4.0.1" />
    <name value="AdministrativeGender" />
    <title value="AdministrativeGender" />
    <status value="active" />
    <experimental value="false" />
    <date value="2019-11-01T09:29:23+11:00" />
    <description value="The gender of a person used for administrative purposes." />
    <caseSensitive value="true" />
    <valueSet value="http://hl7.org/fhir/ValueSet/administrative-gender" />
    <content value="complete" />
    <concept>
        <extension url="http://hl7.org/fhir/StructureDefinition/codesystem-concept-comments">
            <valueString value="Male" />
        </extension>
        <code value="male" />
        <display value="Male" />
        <definition value="Male." />
    </concept>
    <concept>
        <extension url="http://hl7.org/fhir/StructureDefinition/codesystem-concept-comments">
            <valueString value="Female" />
        </extension>
        <code value="female" />
        <display value="Female" />
        <definition value="Female." />
    </concept>
    <concept>
        <extension url="http://hl7.org/fhir/StructureDefinition/codesystem-concept-comments">
            <valueString value="The administrative gender is a value other than male/female/unknown. Where this value is selected, systems may often choose to include an extension with the localized more specific value." />
        </extension>
        <code value="other" />
        <display value="Other" />
        <definition value="Other." />
    </concept>
    <concept>
        <extension url="http://hl7.org/fhir/StructureDefinition/codesystem-concept-comments">
            <valueString value="A proper value is applicable, but not known.  Usage Notes: This means the actual value is not known. If the only thing that is unknown is how to properly express the value in the necessary constraints (value set, datatype, etc.), then the OTH or UNC flavor should be used. No properties should be included for a datatype with this property unless:  Those properties themselves directly translate to a semantic of &quot;unknown&quot;. (E.g. a local code sent as a translation that conveys &#39;unknown&#39;) Those properties further qualify the nature of what is unknown. (E.g. specifying a use code of &quot;H&quot; and a URL prefix of &quot;tel:&quot; to convey that it is the home phone number that is unknown.)" />
        </extension>
        <code value="unknown" />
        <display value="Unknown" />
        <definition value="Unknown." />
    </concept>
</CodeSystem>

JSON View

{
    "resourceType": "CodeSystem",
    "id": "administrative-gender",
    "meta": {
        "lastUpdated": "2019-11-01T09:29:23.356+11:00"
    },
    "extension":  [
        {
            "url": "http://hl7.org/fhir/StructureDefinition/structuredefinition-wg",
            "valueCode": "pa"
        },
        {
            "url": "http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status",
            "valueCode": "normative"
        },
        {
            "url": "http://hl7.org/fhir/StructureDefinition/structuredefinition-fmm",
            "valueInteger": 5
        },
        {
            "url": "http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version",
            "valueCode": "4.0.0"
        }
    ],
    "url": "http://hl7.org/fhir/administrative-gender",
    "identifier":  [
        {
            "system": "urn:ietf:rfc:3986",
            "value": "urn:oid:2.16.840.1.113883.4.642.4.2"
        }
    ],
    "version": "4.0.1",
    "name": "AdministrativeGender",
    "title": "AdministrativeGender",
    "status": "active",
    "experimental": false,
    "date": "2019-11-01T09:29:23+11:00",
    "description": "The gender of a person used for administrative purposes.",
    "caseSensitive": true,
    "valueSet": "http://hl7.org/fhir/ValueSet/administrative-gender",
    "content": "complete",
    "concept":  [
        {
            "extension":  [
                {
                    "url": "http://hl7.org/fhir/StructureDefinition/codesystem-concept-comments",
                    "valueString": "Male"
                }
            ],
            "code": "male",
            "display": "Male",
            "definition": "Male."
        },
        {
            "extension":  [
                {
                    "url": "http://hl7.org/fhir/StructureDefinition/codesystem-concept-comments",
                    "valueString": "Female"
                }
            ],
            "code": "female",
            "display": "Female",
            "definition": "Female."
        },
        {
            "extension":  [
                {
                    "url": "http://hl7.org/fhir/StructureDefinition/codesystem-concept-comments",
                    "valueString": "The administrative gender is a value other than male/female/unknown. Where this value is selected, systems may often choose to include an extension with the localized more specific value."
                }
            ],
            "code": "other",
            "display": "Other",
            "definition": "Other."
        },
        {
            "extension":  [
                {
                    "url": "http://hl7.org/fhir/StructureDefinition/codesystem-concept-comments",
                    "valueString": "A proper value is applicable, but not known.  Usage Notes: This means the actual value is not known. If the only thing that is unknown is how to properly express the value in the necessary constraints (value set, datatype, etc.), then the OTH or UNC flavor should be used. No properties should be included for a datatype with this property unless:  Those properties themselves directly translate to a semantic of \"unknown\". (E.g. a local code sent as a translation that conveys 'unknown') Those properties further qualify the nature of what is unknown. (E.g. specifying a use code of \"H\" and a URL prefix of \"tel:\" to convey that it is the home phone number that is unknown.)"
                }
            ],
            "code": "unknown",
            "display": "Unknown",
            "definition": "Unknown."
        }
    ]
}

`birthDate`

The related person's date of birth. An approximate date may be used (e.g. just the year) where the full date is not known.

birthDate includes an extension Common Extension patient-birthTime This should be included when the birth time is relevant.

`address`

The address of the related person using the Address datatype.

`photo`

Image of the person.

`period`

The period of time during which this relationship is or was active. If there are no dates defined, then the interval is unknown.

`communication`

A language which may be used to communicate with about the patient's health.