| Immunization | I | | Immunization | Element IdShort description Immunization event information Definition Describes the event of a patient being administered a vaccine or a record of an immunization as reported by a patient, a clinician or another party.
Immunization Constraints- dom-2:If the resource is contained in another resource, it SHALL NOT contain nested Resources
contained.contained.empty() - dom-4:If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated
contained.meta.versionId.empty() and contained.meta.lastUpdated.empty() - dom-3:If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource
contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty() - dom-6:A resource should have narrative for robust management
text.`div`.exists() - dom-5:If a resource is contained in another resource, it SHALL NOT have a security label
contained.meta.security.empty() - ukcore-imm-1:If the immunization was not given then Immunization.status value MUST = 'not-done', and the Immunization.statusReason MUST be populated
(status != 'not-done') or (status = 'not-done' and statusReason.exists())
- rim:Entity. Role, or Act
- workflow:Event
- v2:VXU_V04
- rim:SubstanceAdministration
|
| extension | I | 0..* | Extension | Element IdShort description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Extension Sliced: Unordered, Open, by url(Value) Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) - ext-1:Must have either extensions or value[x], not both
extension.exists() != value.exists()
|
| parentPresent | I | 0..1 | Extension(boolean) | Element IdImmunization.extension:parentPresent Was a parent present at an immunisation? Alternate names extensions, user content Definition Was a parent present at an immunisation?
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Extension(boolean) Extension URL https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-ParentPresent Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) - ext-1:Must have either extensions or value[x], not both
extension.exists() != value.exists()
|
| vaccinationProcedure | I | 0..1 | Extension(CodeableConcept) | Element IdImmunization.extension:vaccinationProcedure An extension to hold an immunization procedure code Alternate names extensions, user content Definition An extension to hold an immunization procedure code.
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Extension(CodeableConcept) Extension URL https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-VaccinationProcedure Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) - ext-1:Must have either extensions or value[x], not both
extension.exists() != value.exists()
|
| identifier | | 0..* | Identifier | There are no (further) constraints on this element Element IdShort description Business identifier Definition A unique identifier assigned to this immunization record.
Identifier Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
- rim:n/a
- v2:CX / EI (occasionally, more often EI maps to a resource id or a URL)
- rim:II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT]
- servd:Identifier
- workflow:Event.identifier
- w5:FiveWs.identifier
- rim:.id
- cda:ClinicalDocument/component/StructuredBody/component/section/entry/substanceAdministration/id
|
| use | Σ ?! | 0..1 | codeBinding | There are no (further) constraints on this element Element IdImmunization.identifier.use usual | official | temp | secondary | old (If known) Definition The purpose of this identifier.
Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.
Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.
code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required)Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
- rim:n/a
- v2:N/A
- rim:Role.code or implied by context
|
| type | Σ | 0..1 | CodeableConceptBinding | There are no (further) constraints on this element Element IdImmunization.identifier.type Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.
Allows users to make use of identifiers when the identifier system is not known.
This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.
CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible)Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
- rim:n/a
- v2:CE/CNE/CWE
- rim:CD
- orim:fhir:CodeableConcept rdfs:subClassOf dt:CD
- v2:CX.5
- rim:Role.code or implied by context
|
| system | Σ | 0..1 | uri | There are no (further) constraints on this element Element IdImmunization.identifier.system The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique.
There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.
Identifier.system is always case sensitive.
uri Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
Generalhttp://www.acme.com/identifiers/patient
Mappings- rim:n/a
- v2:CX.4 / EI-2-4
- rim:II.root or Role.id.root
- servd:./IdentifierType
|
| value | Σ | 0..1 | string | There are no (further) constraints on this element Element IdImmunization.identifier.value The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system.
If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.
string Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
Mappings- rim:n/a
- v2:CX.1 / EI.1
- rim:II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root)
- servd:./Value
|
| period | Σ I | 0..1 | Period | There are no (further) constraints on this element Element IdImmunization.identifier.period Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use.
A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times").
Period is not used for a duration (a measure of elapsed time). See Duration.
Period Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) - per-1:If present, start SHALL have a lower value than end
start.hasValue().not() or end.hasValue().not() or (start <= end)
- rim:n/a
- v2:DR
- rim:IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"]
- v2:CX.7 + CX.8
- rim:Role.effectiveTime or implied by context
- servd:./StartDate and ./EndDate
|
| assigner | Σ I | 0..1 | Reference(UK Core Organization) | Element IdImmunization.identifier.assigner Organization that issued id (may be just text) Definition Organization that issued/manages the identifier.
The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.
Reference(UK Core Organization) Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) - ref-1:SHALL have a contained resource if a local reference is provided
reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))
- rim:n/a
- rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity)
- v2:CX.4 / (CX.4,CX.9,CX.10)
- rim:II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper
- servd:./IdentifierIssuingAuthority
|
| status | Σ ?! | 1..1 | codeBinding | There are no (further) constraints on this element Element IdShort description completed | entered-in-error | not-done Definition Indicates the current status of the immunization event.
Will generally be set to show that the immunization has been completed or not done. This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid.
code Binding A set of codes indicating the current status of an Immunization. ImmunizationStatusCodes (required)Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
- rim:n/a
- workflow:Event.status
- w5:FiveWs.status
- rim:statusCode
|
| statusReason | | 0..1 | CodeableConceptBinding | Element IdImmunization.statusReason Reason not done Definition Indicates the reason the immunization event was not performed.
This is generally only used for the status of "not-done". The reason for performing the immunization event is captured in reasonCode, not here.
CodeableConcept Binding The reason why a vaccine was not administered. UKCoreReasonImmunizationNotAdministered (extensible)Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
- rim:n/a
- v2:CE/CNE/CWE
- rim:CD
- orim:fhir:CodeableConcept rdfs:subClassOf dt:CD
- workflow:Event.statusReason
- rim:.inboundRelationship[typeCode=SUBJ].source[classCode=CACT, moodCode=EVN].reasonCOde
|
| vaccineCode | Σ | 1..1 | CodeableConceptBinding | Element IdShort description Vaccine product administered Definition Vaccine that was administered or was to be administered.
Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination.
CodeableConcept Binding The code for vaccine product administered. UKCoreVaccineCode (extensible)Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
- rim:n/a
- v2:CE/CNE/CWE
- rim:CD
- orim:fhir:CodeableConcept rdfs:subClassOf dt:CD
- workflow:Event.code
- w5:FiveWs.what[x]
- v2:RXA-5
- rim:.code
- cda:ClinicalDocument/component/StructuredBody/component/section/entry/substanceAdministration/consumable/manfacturedProduct/manufacturedMaterial/realmCode/code
|
| patient | Σ I | 1..1 | Reference(UK Core Patient) | Element IdShort description Who was immunized Definition The patient who either received or did not receive the immunization.
References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.
Reference(UK Core Patient) Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) - ref-1:SHALL have a contained resource if a local reference is provided
reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))
- rim:n/a
- rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity)
- workflow:Event.subject
- w5:FiveWs.subject[x]
- v2:PID-3
- rim:.partipication[ttypeCode=].role
- w5:FiveWs.subject
|
| reference | Σ I | 0..1 | string | There are no (further) constraints on this element Element IdImmunization.patient.reference Literal reference, Relative, internal or absolute URL Definition A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.
string Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
|
| type | Σ | 0..1 | uriBinding | Element IdImmunization.patient.type Type the reference refers to (e.g. "Patient") Definition The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.
The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).
This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified.
uri Binding A resource (or, for logical models, the URI of the logical model). ResourceType (extensible)Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
|
| identifier | Σ | 0..1 | Identifier | There are no (further) constraints on this element Element IdImmunization.patient.identifier Logical reference, when literal reference is not known Definition An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.
When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference
Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.
Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).
Identifier Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
- rim:n/a
- v2:CX / EI (occasionally, more often EI maps to a resource id or a URL)
- rim:II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT]
- servd:Identifier
- rim:.identifier
|
| use | Σ ?! | 0..1 | codeBinding | There are no (further) constraints on this element Element IdImmunization.patient.identifier.use usual | official | temp | secondary | old (If known) Definition The purpose of this identifier.
Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.
Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.
code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required)Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
- rim:n/a
- v2:N/A
- rim:Role.code or implied by context
|
| type | Σ | 0..1 | CodeableConceptBinding | There are no (further) constraints on this element Element IdImmunization.patient.identifier.type Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.
Allows users to make use of identifiers when the identifier system is not known.
This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.
CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible)Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
- rim:n/a
- v2:CE/CNE/CWE
- rim:CD
- orim:fhir:CodeableConcept rdfs:subClassOf dt:CD
- v2:CX.5
- rim:Role.code or implied by context
|
| system | Σ | 0..1 | uri | There are no (further) constraints on this element Element IdImmunization.patient.identifier.system The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique.
There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.
Identifier.system is always case sensitive.
uri Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
Generalhttp://www.acme.com/identifiers/patient
Mappings- rim:n/a
- v2:CX.4 / EI-2-4
- rim:II.root or Role.id.root
- servd:./IdentifierType
|
| value | Σ | 0..1 | string | There are no (further) constraints on this element Element IdImmunization.patient.identifier.value The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system.
If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.
string Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
Mappings- rim:n/a
- v2:CX.1 / EI.1
- rim:II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root)
- servd:./Value
|
| period | Σ I | 0..1 | Period | There are no (further) constraints on this element Element IdImmunization.patient.identifier.period Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use.
A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times").
Period is not used for a duration (a measure of elapsed time). See Duration.
Period Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) - per-1:If present, start SHALL have a lower value than end
start.hasValue().not() or end.hasValue().not() or (start <= end)
- rim:n/a
- v2:DR
- rim:IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"]
- v2:CX.7 + CX.8
- rim:Role.effectiveTime or implied by context
- servd:./StartDate and ./EndDate
|
| assigner | Σ I | 0..1 | Reference(UK Core Organization) | Element IdImmunization.patient.identifier.assigner Organization that issued id (may be just text) Definition Organization that issued/manages the identifier.
The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.
Reference(UK Core Organization) Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) - ref-1:SHALL have a contained resource if a local reference is provided
reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))
- rim:n/a
- rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity)
- v2:CX.4 / (CX.4,CX.9,CX.10)
- rim:II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper
- servd:./IdentifierIssuingAuthority
|
| display | Σ | 0..1 | string | There are no (further) constraints on this element Element IdImmunization.patient.display Text alternative for the resource Definition Plain text narrative that identifies the resource in addition to the resource reference.
This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.
string Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
|
| encounter | I | 0..1 | Reference(UK Core Encounter) | Element IdShort description Encounter immunization was part of Definition The visit or admission or other contact between patient and health care provider the immunization was performed as part of.
References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.
Reference(UK Core Encounter) Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) - ref-1:SHALL have a contained resource if a local reference is provided
reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))
- rim:n/a
- rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity)
- workflow:Event.context
- w5:FiveWs.context
- v2:PV1-19
- rim:component->EncounterEvent
|
| reference | Σ I | 0..1 | string | There are no (further) constraints on this element Element IdImmunization.encounter.reference Literal reference, Relative, internal or absolute URL Definition A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.
string Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
|
| type | Σ | 0..1 | uriBinding | Element IdImmunization.encounter.type Type the reference refers to (e.g. "Patient") Definition The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.
The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).
This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified.
uri Binding A resource (or, for logical models, the URI of the logical model). ResourceType (extensible)Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
|
| identifier | Σ | 0..1 | Identifier | There are no (further) constraints on this element Element IdImmunization.encounter.identifier Logical reference, when literal reference is not known Definition An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.
When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference
Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.
Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).
Identifier Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
- rim:n/a
- v2:CX / EI (occasionally, more often EI maps to a resource id or a URL)
- rim:II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT]
- servd:Identifier
- rim:.identifier
|
| use | Σ ?! | 0..1 | codeBinding | There are no (further) constraints on this element Element IdImmunization.encounter.identifier.use usual | official | temp | secondary | old (If known) Definition The purpose of this identifier.
Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.
Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.
code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required)Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
- rim:n/a
- v2:N/A
- rim:Role.code or implied by context
|
| type | Σ | 0..1 | CodeableConceptBinding | There are no (further) constraints on this element Element IdImmunization.encounter.identifier.type Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.
Allows users to make use of identifiers when the identifier system is not known.
This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.
CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible)Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
- rim:n/a
- v2:CE/CNE/CWE
- rim:CD
- orim:fhir:CodeableConcept rdfs:subClassOf dt:CD
- v2:CX.5
- rim:Role.code or implied by context
|
| system | Σ | 0..1 | uri | There are no (further) constraints on this element Element IdImmunization.encounter.identifier.system The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique.
There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.
Identifier.system is always case sensitive.
uri Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
Generalhttp://www.acme.com/identifiers/patient
Mappings- rim:n/a
- v2:CX.4 / EI-2-4
- rim:II.root or Role.id.root
- servd:./IdentifierType
|
| value | Σ | 0..1 | string | There are no (further) constraints on this element Element IdImmunization.encounter.identifier.value The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system.
If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.
string Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
Mappings- rim:n/a
- v2:CX.1 / EI.1
- rim:II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root)
- servd:./Value
|
| period | Σ I | 0..1 | Period | There are no (further) constraints on this element Element IdImmunization.encounter.identifier.period Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use.
A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times").
Period is not used for a duration (a measure of elapsed time). See Duration.
Period Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) - per-1:If present, start SHALL have a lower value than end
start.hasValue().not() or end.hasValue().not() or (start <= end)
- rim:n/a
- v2:DR
- rim:IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"]
- v2:CX.7 + CX.8
- rim:Role.effectiveTime or implied by context
- servd:./StartDate and ./EndDate
|
| assigner | Σ I | 0..1 | Reference(UK Core Organization) | Element IdImmunization.encounter.identifier.assigner Organization that issued id (may be just text) Definition Organization that issued/manages the identifier.
The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.
Reference(UK Core Organization) Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) - ref-1:SHALL have a contained resource if a local reference is provided
reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))
- rim:n/a
- rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity)
- v2:CX.4 / (CX.4,CX.9,CX.10)
- rim:II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper
- servd:./IdentifierIssuingAuthority
|
| display | Σ | 0..1 | string | There are no (further) constraints on this element Element IdImmunization.encounter.display Text alternative for the resource Definition Plain text narrative that identifies the resource in addition to the resource reference.
This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.
string Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
|
| occurrence[x] | Σ | 1..1 | | There are no (further) constraints on this element Element IdImmunization.occurrence[x] Vaccine administration date Definition Date vaccine administered or was to be administered.
When immunizations are given a specific date and time should always be known. When immunizations are patient reported, a specific date might not be known. Although partial dates are allowed, an adult patient might not be able to recall the year a childhood immunization was given. An exact date is always preferable, but the use of the String data type is acceptable when an exact date is not known. A small number of vaccines (e.g. live oral typhoid vaccine) are given as a series of patient self-administered dose over a span of time. In cases like this, often, only the first dose (typically a provider supervised dose) is recorded with the occurrence indicating the date/time of the first dose.
- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
- rim:n/a
- workflow:Event.occurrence[x]
- w5:FiveWs.done[x]
- v2:RXA-3
- rim:.effectiveTime
- cda:ClinicalDocument/component/StructuredBody/component/section/entry/substanceAdministration/effectiveTime/value
|
| occurrenceDateTime | | | dateTime | There are no (further) constraints on this element Data Type dateTime |
| occurrenceString | | | string | There are no (further) constraints on this element Data Type string |
| recorded | | 0..1 | dateTime | There are no (further) constraints on this element Element IdShort description When the immunization was first captured in the subject's record Definition The date the occurrence of the immunization was first captured in the record - potentially significantly after the occurrence of the event.
dateTime Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
- rim:n/a
- w5:FiveWs.recorded
- rim:.participation[typeCode=AUT].time
|
| primarySource | Σ | 0..1 | boolean | There are no (further) constraints on this element Element IdImmunization.primarySource Indicates context the data was recorded in Definition An indication that the content of the record is based on information from the person who administered the vaccine. This reflects the context under which the data was originally recorded.
Reflects the “reliability” of the content.
boolean Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
- rim:n/a
- w5:FiveWs.source
- v2:RXA-9
- rim:immunization.uncertaintycode (if primary source=false, uncertainty=U)
|
| reportOrigin | | 0..1 | CodeableConcept | There are no (further) constraints on this element Element IdImmunization.reportOrigin Indicates the source of a secondarily reported record Definition The source of the data when the report of the immunization event is not based on information from the person who administered the vaccine.
Should not be populated if primarySource = True, not required even if primarySource = False.
CodeableConcept Binding The source of the data for a record which is not from a primary source. ImmunizationOriginCodes (example)Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
- rim:n/a
- v2:CE/CNE/CWE
- rim:CD
- orim:fhir:CodeableConcept rdfs:subClassOf dt:CD
- w5:FiveWs.source
- v2:RXA-9
- rim:.participation[typeCode=INF].role[classCode=PAT] (this syntax for self-reported) .participation[typeCode=INF].role[classCode=LIC] (this syntax for health care professional) .participation[typeCode=INF].role[classCode=PRS] (this syntax for family member)
|
| location | I | 0..1 | Reference(UK Core Location) | Element IdShort description Where immunization occurred Definition The service delivery location where the vaccine administration occurred.
References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.
Reference(UK Core Location) Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) - ref-1:SHALL have a contained resource if a local reference is provided
reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))
- rim:n/a
- rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity)
- workflow:Event.location
- w5:FiveWs.where[x]
- v2:RXA-27 (or RXA-11, deprecated as of v2.7)
- rim:.participation[typeCode=LOC].COCT_MT240000UV
|
| reference | Σ I | 0..1 | string | There are no (further) constraints on this element Element IdImmunization.location.reference Literal reference, Relative, internal or absolute URL Definition A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.
string Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
|
| type | Σ | 0..1 | uriBinding | Element IdImmunization.location.type Type the reference refers to (e.g. "Patient") Definition The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.
The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).
This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified.
uri Binding A resource (or, for logical models, the URI of the logical model). ResourceType (extensible)Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
|
| identifier | Σ | 0..1 | Identifier | There are no (further) constraints on this element Element IdImmunization.location.identifier Logical reference, when literal reference is not known Definition An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.
When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference
Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.
Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).
Identifier Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
- rim:n/a
- v2:CX / EI (occasionally, more often EI maps to a resource id or a URL)
- rim:II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT]
- servd:Identifier
- rim:.identifier
|
| use | Σ ?! | 0..1 | codeBinding | There are no (further) constraints on this element Element IdImmunization.location.identifier.use usual | official | temp | secondary | old (If known) Definition The purpose of this identifier.
Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.
Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.
code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required)Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
- rim:n/a
- v2:N/A
- rim:Role.code or implied by context
|
| type | Σ | 0..1 | CodeableConceptBinding | There are no (further) constraints on this element Element IdImmunization.location.identifier.type Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.
Allows users to make use of identifiers when the identifier system is not known.
This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.
CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible)Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
- rim:n/a
- v2:CE/CNE/CWE
- rim:CD
- orim:fhir:CodeableConcept rdfs:subClassOf dt:CD
- v2:CX.5
- rim:Role.code or implied by context
|
| system | Σ | 0..1 | uri | There are no (further) constraints on this element Element IdImmunization.location.identifier.system The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique.
There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.
Identifier.system is always case sensitive.
uri Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
Generalhttp://www.acme.com/identifiers/patient
Mappings- rim:n/a
- v2:CX.4 / EI-2-4
- rim:II.root or Role.id.root
- servd:./IdentifierType
|
| value | Σ | 0..1 | string | There are no (further) constraints on this element Element IdImmunization.location.identifier.value The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system.
If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.
string Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
Mappings- rim:n/a
- v2:CX.1 / EI.1
- rim:II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root)
- servd:./Value
|
| period | Σ I | 0..1 | Period | There are no (further) constraints on this element Element IdImmunization.location.identifier.period Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use.
A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times").
Period is not used for a duration (a measure of elapsed time). See Duration.
Period Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) - per-1:If present, start SHALL have a lower value than end
start.hasValue().not() or end.hasValue().not() or (start <= end)
- rim:n/a
- v2:DR
- rim:IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"]
- v2:CX.7 + CX.8
- rim:Role.effectiveTime or implied by context
- servd:./StartDate and ./EndDate
|
| assigner | Σ I | 0..1 | Reference(UK Core Organization) | Element IdImmunization.location.identifier.assigner Organization that issued id (may be just text) Definition Organization that issued/manages the identifier.
The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.
Reference(UK Core Organization) Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) - ref-1:SHALL have a contained resource if a local reference is provided
reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))
- rim:n/a
- rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity)
- v2:CX.4 / (CX.4,CX.9,CX.10)
- rim:II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper
- servd:./IdentifierIssuingAuthority
|
| display | Σ | 0..1 | string | There are no (further) constraints on this element Element IdImmunization.location.display Text alternative for the resource Definition Plain text narrative that identifies the resource in addition to the resource reference.
This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.
string Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
|
| manufacturer | I | 0..1 | Reference(UK Core Organization) | Element IdImmunization.manufacturer Vaccine manufacturer Definition Name of vaccine manufacturer.
References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.
Reference(UK Core Organization) Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) - ref-1:SHALL have a contained resource if a local reference is provided
reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))
- rim:n/a
- rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity)
- v2:RXA-17
- rim:.participation[typeCode=CSM].role[classCode=INST].scopedRole.scoper[classCode=ORG]
- cda:ClinicalDocument/component/StructuredBody/component/section/entry/substanceAdministration/consumable/manfacturedProduct/manufacuturerOrganization/name
|
| reference | Σ I | 0..1 | string | There are no (further) constraints on this element Element IdImmunization.manufacturer.reference Literal reference, Relative, internal or absolute URL Definition A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.
string Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
|
| type | Σ | 0..1 | uriBinding | Element IdImmunization.manufacturer.type Type the reference refers to (e.g. "Patient") Definition The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.
The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).
This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified.
uri Binding A resource (or, for logical models, the URI of the logical model). ResourceType (extensible)Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
|
| identifier | Σ | 0..1 | Identifier | There are no (further) constraints on this element Element IdImmunization.manufacturer.identifier Logical reference, when literal reference is not known Definition An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.
When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference
Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.
Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).
Identifier Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
- rim:n/a
- v2:CX / EI (occasionally, more often EI maps to a resource id or a URL)
- rim:II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT]
- servd:Identifier
- rim:.identifier
|
| use | Σ ?! | 0..1 | codeBinding | There are no (further) constraints on this element Element IdImmunization.manufacturer.identifier.use usual | official | temp | secondary | old (If known) Definition The purpose of this identifier.
Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.
Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.
code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required)Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
- rim:n/a
- v2:N/A
- rim:Role.code or implied by context
|
| type | Σ | 0..1 | CodeableConceptBinding | There are no (further) constraints on this element Element IdImmunization.manufacturer.identifier.type Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.
Allows users to make use of identifiers when the identifier system is not known.
This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.
CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible)Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
- rim:n/a
- v2:CE/CNE/CWE
- rim:CD
- orim:fhir:CodeableConcept rdfs:subClassOf dt:CD
- v2:CX.5
- rim:Role.code or implied by context
|
| system | Σ | 0..1 | uri | There are no (further) constraints on this element Element IdImmunization.manufacturer.identifier.system The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique.
There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.
Identifier.system is always case sensitive.
uri Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
Generalhttp://www.acme.com/identifiers/patient
Mappings- rim:n/a
- v2:CX.4 / EI-2-4
- rim:II.root or Role.id.root
- servd:./IdentifierType
|
| value | Σ | 0..1 | string | There are no (further) constraints on this element Element IdImmunization.manufacturer.identifier.value The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system.
If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.
string Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
Mappings- rim:n/a
- v2:CX.1 / EI.1
- rim:II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root)
- servd:./Value
|
| period | Σ I | 0..1 | Period | There are no (further) constraints on this element Element IdImmunization.manufacturer.identifier.period Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use.
A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times").
Period is not used for a duration (a measure of elapsed time). See Duration.
Period Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) - per-1:If present, start SHALL have a lower value than end
start.hasValue().not() or end.hasValue().not() or (start <= end)
- rim:n/a
- v2:DR
- rim:IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"]
- v2:CX.7 + CX.8
- rim:Role.effectiveTime or implied by context
- servd:./StartDate and ./EndDate
|
| assigner | Σ I | 0..1 | Reference(UK Core Organization) | Element IdImmunization.manufacturer.identifier.assigner Organization that issued id (may be just text) Definition Organization that issued/manages the identifier.
The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.
Reference(UK Core Organization) Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) - ref-1:SHALL have a contained resource if a local reference is provided
reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))
- rim:n/a
- rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity)
- v2:CX.4 / (CX.4,CX.9,CX.10)
- rim:II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper
- servd:./IdentifierIssuingAuthority
|
| display | Σ | 0..1 | string | There are no (further) constraints on this element Element IdImmunization.manufacturer.display Text alternative for the resource Definition Plain text narrative that identifies the resource in addition to the resource reference.
This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.
string Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
|
| lotNumber | | 0..1 | string | There are no (further) constraints on this element Element IdShort description Vaccine lot number Definition Lot number of the vaccine product.
Note that FHIR strings SHALL NOT exceed 1MB in size
string Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
- rim:n/a
- v2:RXA-15
- rim:.participation[typeCode=CSM].role[classCode=INST].scopedRole.scoper[classCode=MMAT].id
- cda:ClinicalDocument/component/StructuredBody/component/section/entry/substanceAdministration/consumable/manfacturedProduct/manufacturedMaterial/lotNumberText
|
| expirationDate | | 0..1 | date | There are no (further) constraints on this element Element IdImmunization.expirationDate Vaccine expiration date Definition Date vaccine batch expires.
date Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
- rim:n/a
- v2:RXA-16
- rim:.participation[typeCode=CSM].role[classCode=INST].scopedRole.scoper[classCode=MMAT].expirationTime
|
| site | | 0..1 | CodeableConceptBinding | Element IdShort description Body site vaccine was administered Definition Body site where vaccine was administered.
Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination.
CodeableConcept Binding The site at which the vaccine was administered. UKCoreImmunizationAdministrationBodySite (extensible)Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
- rim:n/a
- v2:CE/CNE/CWE
- rim:CD
- orim:fhir:CodeableConcept rdfs:subClassOf dt:CD
- v2:RXR-2
- rim:observation.targetSiteCode
- cda:ClinicalDocument/component/StructuredBody/component/section/entry/substanceAdministration/approachSiteCode/code
|
| route | | 0..1 | CodeableConceptBinding | Element IdShort description How vaccine entered body Definition The path by which the vaccine product is taken into the body.
Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination.
CodeableConcept Binding The route by which the vaccine was administered. UKCoreSubstanceOrProductAdministrationRoute (extensible)Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
- rim:n/a
- v2:CE/CNE/CWE
- rim:CD
- orim:fhir:CodeableConcept rdfs:subClassOf dt:CD
- v2:RXR-1
- rim:.routeCode
- cda:ClinicalDocument/component/StructuredBody/component/section/entry/substanceAdministration/routeCode/code
|
| doseQuantity | I | 0..1 | SimpleQuantity | There are no (further) constraints on this element Element IdImmunization.doseQuantity Amount of vaccine administered Definition The quantity of vaccine product that was administered.
The context of use may frequently define what kind of quantity this is and therefore what kind of units can be used. The context of use may also restrict the values for the comparator.
SimpleQuantity Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) - qty-3:If a code for the unit is present, the system SHALL also be present
code.empty() or system.exists() - sqty-1:The comparator is not used on a SimpleQuantity
comparator.empty()
- rim:n/a
- v2:SN (see also Range) or CQ
- rim:PQ, IVL<PQ>, MO, CO, depending on the values
- v2:RXA-6 / RXA-7
- rim:.doseQuantity
|
| performer | Σ | 0..* | BackboneElement | There are no (further) constraints on this element Element IdShort description Who performed event Definition Indicates who performed the immunization event.
BackboneElement Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
- rim:n/a
- workflow:Event.performer
- v2:ORC-12 / RXA-10
- rim:.participation[typeCode=PRF].role[scoper.determinerCode=INSTANCE]
|
| function | Σ | 0..1 | CodeableConceptBinding | There are no (further) constraints on this element Element IdImmunization.performer.function What type of performance was done Definition Describes the type of performance (e.g. ordering provider, administering provider, etc.).
Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination.
CodeableConcept Binding The role a practitioner or organization plays in the immunization event. ImmunizationFunctionCodes (extensible)Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
- rim:n/a
- v2:CE/CNE/CWE
- rim:CD
- orim:fhir:CodeableConcept rdfs:subClassOf dt:CD
- workflow:Event.performer.function
- rim:.participation.functionCode
|
| actor | Σ I | 1..1 | Reference(UK Core Practitioner | UK Core PractitionerRole | UK Core Organization) | Element IdImmunization.performer.actor Individual or organization who was performing Definition The practitioner or organization who performed the action.
When the individual practitioner who performed the action is known, it is best to send.
Reference(UK Core Practitioner | UK Core PractitionerRole | UK Core Organization) Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) - ref-1:SHALL have a contained resource if a local reference is provided
reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))
- rim:n/a
- rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity)
- workflow:Event.performer.actor
- w5:FiveWs.actor
- rim:.player
|
| note | Σ | 0..* | Annotation | There are no (further) constraints on this element Element IdShort description Additional immunization notes Definition Extra information about the immunization that is not conveyed by the other attributes.
For systems that do not have structured annotations, they can simply communicate a single annotation with no author or time. This element may need to be included in narrative because of the potential for modifying information. Annotations SHOULD NOT be used to communicate "modifying" information that could be computable. (This is a SHOULD because enforcing user behavior is nearly impossible).
Annotation Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
- rim:n/a
- v2:N/A
- rim:Act
- workflow:Event.note
- v2:OBX-5 : OBX-3 = 48767-8
- rim:note
|
| author[x] | Σ | 0..1 | | There are no (further) constraints on this element Element IdImmunization.note.author[x] Individual responsible for the annotation Definition The individual responsible for making the annotation.
Organization is used when there's no need for specific attribution as to who made the comment.
- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
- rim:n/a
- v2:N/A
- rim:Act.participant[typeCode=AUT].role
|
| authorString | | | string | Data Type string |
| authorReference | | | Reference(UK Core Practitioner | UK Core Patient | UK Core RelatedPerson | UK Core Organization) | Data Type Reference(UK Core Practitioner | UK Core Patient | UK Core RelatedPerson | UK Core Organization) |
| time | Σ | 0..1 | dateTime | There are no (further) constraints on this element Element IdShort description When the annotation was made Definition Indicates when this particular annotation was made.
dateTime Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
- rim:n/a
- v2:N/A
- rim:Act.effectiveTime
|
| text | Σ | 1..1 | markdown | There are no (further) constraints on this element Element IdShort description The annotation - text content (as markdown) Definition The text of the annotation in markdown format.
Systems are not required to have markdown support, so the text should be readable without markdown processing. The markdown syntax is GFM - see https://github.github.com/gfm/
markdown Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
- rim:n/a
- v2:N/A
- rim:Act.text
|
| reasonCode | | 0..* | CodeableConceptBinding | Element IdShort description Why immunization occurred Definition Reasons why the vaccine was administered.
Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination.
CodeableConcept Binding The reason why a vaccine was administered. UKCoreImmunizationExplanationReason (extensible)Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
- rim:n/a
- v2:CE/CNE/CWE
- rim:CD
- orim:fhir:CodeableConcept rdfs:subClassOf dt:CD
- workflow:Event.reasonCode
- rim:[actionNegationInd=false].reasonCode
|
| reasonReference | I | 0..* | Reference(UK Core Condition | UK Core Observation | UK Core DiagnosticReport) | Element IdImmunization.reasonReference Why immunization occurred Definition Condition, Observation or DiagnosticReport that supports why the immunization was administered.
References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.
Reference(UK Core Condition | UK Core Observation | UK Core DiagnosticReport) Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) - ref-1:SHALL have a contained resource if a local reference is provided
reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))
- rim:n/a
- rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity)
- workflow:Event.reasonReference
- rim:N/A
|
| reference | Σ I | 0..1 | string | There are no (further) constraints on this element Element IdImmunization.reasonReference.reference Literal reference, Relative, internal or absolute URL Definition A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.
string Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
|
| type | Σ | 0..1 | uriBinding | Element IdImmunization.reasonReference.type Type the reference refers to (e.g. "Patient") Definition The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.
The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).
This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified.
uri Binding A resource (or, for logical models, the URI of the logical model). ResourceType (extensible)Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
|
| identifier | Σ | 0..1 | Identifier | There are no (further) constraints on this element Element IdImmunization.reasonReference.identifier Logical reference, when literal reference is not known Definition An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.
When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference
Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.
Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).
Identifier Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
- rim:n/a
- v2:CX / EI (occasionally, more often EI maps to a resource id or a URL)
- rim:II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT]
- servd:Identifier
- rim:.identifier
|
| use | Σ ?! | 0..1 | codeBinding | There are no (further) constraints on this element Element IdImmunization.reasonReference.identifier.use usual | official | temp | secondary | old (If known) Definition The purpose of this identifier.
Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.
Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.
code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required)Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
- rim:n/a
- v2:N/A
- rim:Role.code or implied by context
|
| type | Σ | 0..1 | CodeableConceptBinding | There are no (further) constraints on this element Element IdImmunization.reasonReference.identifier.type Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.
Allows users to make use of identifiers when the identifier system is not known.
This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.
CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible)Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
- rim:n/a
- v2:CE/CNE/CWE
- rim:CD
- orim:fhir:CodeableConcept rdfs:subClassOf dt:CD
- v2:CX.5
- rim:Role.code or implied by context
|
| system | Σ | 0..1 | uri | There are no (further) constraints on this element Element IdImmunization.reasonReference.identifier.system The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique.
There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.
Identifier.system is always case sensitive.
uri Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
Generalhttp://www.acme.com/identifiers/patient
Mappings- rim:n/a
- v2:CX.4 / EI-2-4
- rim:II.root or Role.id.root
- servd:./IdentifierType
|
| value | Σ | 0..1 | string | There are no (further) constraints on this element Element IdImmunization.reasonReference.identifier.value The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system.
If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.
string Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
Mappings- rim:n/a
- v2:CX.1 / EI.1
- rim:II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root)
- servd:./Value
|
| period | Σ I | 0..1 | Period | There are no (further) constraints on this element Element IdImmunization.reasonReference.identifier.period Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use.
A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times").
Period is not used for a duration (a measure of elapsed time). See Duration.
Period Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) - per-1:If present, start SHALL have a lower value than end
start.hasValue().not() or end.hasValue().not() or (start <= end)
- rim:n/a
- v2:DR
- rim:IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"]
- v2:CX.7 + CX.8
- rim:Role.effectiveTime or implied by context
- servd:./StartDate and ./EndDate
|
| assigner | Σ I | 0..1 | Reference(UK Core Organization) | Element IdImmunization.reasonReference.identifier.assigner Organization that issued id (may be just text) Definition Organization that issued/manages the identifier.
The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.
Reference(UK Core Organization) Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) - ref-1:SHALL have a contained resource if a local reference is provided
reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))
- rim:n/a
- rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity)
- v2:CX.4 / (CX.4,CX.9,CX.10)
- rim:II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper
- servd:./IdentifierIssuingAuthority
|
| display | Σ | 0..1 | string | There are no (further) constraints on this element Element IdImmunization.reasonReference.display Text alternative for the resource Definition Plain text narrative that identifies the resource in addition to the resource reference.
This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.
string Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
|
| isSubpotent | Σ ?! | 0..1 | boolean | There are no (further) constraints on this element Element IdShort description Dose potency Definition Indication if a dose is considered to be subpotent. By default, a dose should be considered to be potent.
Typically, the recognition of the dose being sub-potent is retrospective, after the administration (ex. notification of a manufacturer recall after administration). However, in the case of a partial administration (the patient moves unexpectedly and only some of the dose is actually administered), subpotency may be recognized immediately, but it is still important to record the event.
boolean Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
- rim:n/a
- v2:RXA-20 = PA (partial administration)
- rim:N/A
|
| subpotentReason | | 0..* | CodeableConcept | There are no (further) constraints on this element Element IdImmunization.subpotentReason Reason for being subpotent Definition Reason why a dose is considered to be subpotent.
Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination.
CodeableConcept Binding The reason why a dose is considered to be subpotent. ImmunizationSubpotentReason (example)Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
- rim:n/a
- v2:CE/CNE/CWE
- rim:CD
- orim:fhir:CodeableConcept rdfs:subClassOf dt:CD
- rim:N/A
|
| education | I | 0..* | BackboneElement | There are no (further) constraints on this element Element IdShort description Educational material presented to patient Definition Educational material presented to the patient (or guardian) at the time of vaccine administration.
BackboneElement Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) - imm-1:One of documentType or reference SHALL be present
documentType.exists() or reference.exists()
|
| documentType | | 0..1 | string | There are no (further) constraints on this element Element IdImmunization.education.documentType Educational material document identifier Definition Identifier of the material presented to the patient.
Note that FHIR strings SHALL NOT exceed 1MB in size
string Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
- rim:n/a
- v2:OBX-5 : OBX-3 = 69764-9
- rim:N/A
|
| reference | | 0..1 | uri | There are no (further) constraints on this element Element IdImmunization.education.reference Educational material reference pointer Definition Reference pointer to the educational material given to the patient if the information was on line.
see http://en.wikipedia.org/wiki/Uniform_resource_identifier
uri Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
|
| publicationDate | | 0..1 | dateTime | There are no (further) constraints on this element Element IdImmunization.education.publicationDate Educational material publication date Definition Date the educational material was published.
dateTime Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
- rim:n/a
- v2:OBX-5 : OBX-3 = 29768-9
- rim:N/A
|
| presentationDate | | 0..1 | dateTime | There are no (further) constraints on this element Element IdImmunization.education.presentationDate Educational material presentation date Definition Date the educational material was given to the patient.
dateTime Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
- rim:n/a
- v2:OBX-5 : OBX-3 = 29769-7
- rim:N/A
|
| programEligibility | | 0..* | CodeableConcept | There are no (further) constraints on this element Element IdImmunization.programEligibility Patient eligibility for a vaccination program Definition Indicates a patient's eligibility for a funding program.
Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination.
CodeableConcept Binding The patient's eligibility for a vaccation program. ImmunizationProgramEligibility (example)Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
- rim:n/a
- v2:CE/CNE/CWE
- rim:CD
- orim:fhir:CodeableConcept rdfs:subClassOf dt:CD
- v2:OBX-5 : OBX-3 = 64994-7
- rim:N/A
|
| fundingSource | | 0..1 | CodeableConcept | There are no (further) constraints on this element Element IdImmunization.fundingSource Funding source for the vaccine Definition Indicates the source of the vaccine actually administered. This may be different than the patient eligibility (e.g. the patient may be eligible for a publically purchased vaccine but due to inventory issues, vaccine purchased with private funds was actually administered).
Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination.
CodeableConcept Binding The source of funding used to purchase the vaccine administered. ImmunizationFundingSource (example)Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
- rim:n/a
- v2:CE/CNE/CWE
- rim:CD
- orim:fhir:CodeableConcept rdfs:subClassOf dt:CD
- rim:N/A
|
| reaction | | 0..* | BackboneElement | There are no (further) constraints on this element Element IdShort description Details of a reaction that follows immunization Definition Categorical data indicating that an adverse event is associated in time to an immunization.
A reaction may be an indication of an allergy or intolerance and, if this is determined to be the case, it should be recorded as a new AllergyIntolerance resource instance as most systems will not query against past Immunization.reaction elements.
BackboneElement Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
- rim:n/a
- v2:OBX-3
- rim:Observation[classCode=obs].code
|
| date | | 0..1 | dateTime | There are no (further) constraints on this element Element IdImmunization.reaction.date When reaction started Definition Date of reaction to the immunization.
dateTime Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
- rim:n/a
- v2:OBX-14 (ideally this would be reported in an IAM segment, but IAM is not part of the HL7 v2 VXU message - most likely would appear in OBX segments if at all)
- rim:.effectiveTime
|
| detail | I | 0..1 | Reference(UK Core Observation) | Element IdImmunization.reaction.detail Additional information on reaction Definition Comments References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.
Reference(UK Core Observation) Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) - ref-1:SHALL have a contained resource if a local reference is provided
reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))
- rim:n/a
- rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity)
- v2:OBX-5
- rim:.value
|
| reference | Σ I | 0..1 | string | There are no (further) constraints on this element Element IdImmunization.reaction.detail.reference Literal reference, Relative, internal or absolute URL Definition A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.
string Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
|
| type | Σ | 0..1 | uriBinding | Element IdImmunization.reaction.detail.type Type the reference refers to (e.g. "Patient") Definition The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.
The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).
This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified.
uri Binding A resource (or, for logical models, the URI of the logical model). ResourceType (extensible)Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
|
| identifier | Σ | 0..1 | Identifier | There are no (further) constraints on this element Element IdImmunization.reaction.detail.identifier Logical reference, when literal reference is not known Definition An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.
When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference
Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.
Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).
Identifier Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
- rim:n/a
- v2:CX / EI (occasionally, more often EI maps to a resource id or a URL)
- rim:II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT]
- servd:Identifier
- rim:.identifier
|
| use | Σ ?! | 0..1 | codeBinding | There are no (further) constraints on this element Element IdImmunization.reaction.detail.identifier.use usual | official | temp | secondary | old (If known) Definition The purpose of this identifier.
Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.
Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.
code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required)Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
- rim:n/a
- v2:N/A
- rim:Role.code or implied by context
|
| type | Σ | 0..1 | CodeableConceptBinding | There are no (further) constraints on this element Element IdImmunization.reaction.detail.identifier.type Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.
Allows users to make use of identifiers when the identifier system is not known.
This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.
CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible)Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
- rim:n/a
- v2:CE/CNE/CWE
- rim:CD
- orim:fhir:CodeableConcept rdfs:subClassOf dt:CD
- v2:CX.5
- rim:Role.code or implied by context
|
| system | Σ | 0..1 | uri | There are no (further) constraints on this element Element IdImmunization.reaction.detail.identifier.system The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique.
There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.
Identifier.system is always case sensitive.
uri Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
Generalhttp://www.acme.com/identifiers/patient
Mappings- rim:n/a
- v2:CX.4 / EI-2-4
- rim:II.root or Role.id.root
- servd:./IdentifierType
|
| value | Σ | 0..1 | string | There are no (further) constraints on this element Element IdImmunization.reaction.detail.identifier.value The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system.
If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.
string Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
Mappings- rim:n/a
- v2:CX.1 / EI.1
- rim:II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root)
- servd:./Value
|
| period | Σ I | 0..1 | Period | There are no (further) constraints on this element Element IdImmunization.reaction.detail.identifier.period Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use.
A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times").
Period is not used for a duration (a measure of elapsed time). See Duration.
Period Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) - per-1:If present, start SHALL have a lower value than end
start.hasValue().not() or end.hasValue().not() or (start <= end)
- rim:n/a
- v2:DR
- rim:IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"]
- v2:CX.7 + CX.8
- rim:Role.effectiveTime or implied by context
- servd:./StartDate and ./EndDate
|
| assigner | Σ I | 0..1 | Reference(UK Core Organization) | Element IdImmunization.reaction.detail.identifier.assigner Organization that issued id (may be just text) Definition Organization that issued/manages the identifier.
The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.
Reference(UK Core Organization) Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) - ref-1:SHALL have a contained resource if a local reference is provided
reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))
- rim:n/a
- rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity)
- v2:CX.4 / (CX.4,CX.9,CX.10)
- rim:II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper
- servd:./IdentifierIssuingAuthority
|
| display | Σ | 0..1 | string | There are no (further) constraints on this element Element IdImmunization.reaction.detail.display Text alternative for the resource Definition Plain text narrative that identifies the resource in addition to the resource reference.
This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.
string Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
|
| reported | | 0..1 | boolean | There are no (further) constraints on this element Element IdImmunization.reaction.reported Indicates self-reported reaction Definition Data Type boolean Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
- rim:n/a
- v2:(HL7 v2 doesn't seem to provide for this)
- rim:.participation[typeCode=INF].role[classCode=PAT] (this syntax for self-reported=true)
|
| protocolApplied | | 0..* | BackboneElement | There are no (further) constraints on this element Element IdImmunization.protocolApplied Protocol followed by the provider Definition The protocol (set of recommendations) being followed by the provider who administered the dose.
BackboneElement Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
|
| series | | 0..1 | string | There are no (further) constraints on this element Element IdImmunization.protocolApplied.series Name of vaccine series Definition One possible path to achieve presumed immunity against a disease - within the context of an authority.
Note that FHIR strings SHALL NOT exceed 1MB in size
string Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
|
| authority | I | 0..1 | Reference(UK Core Organization) | Element IdImmunization.protocolApplied.authority Who is responsible for publishing the recommendations Definition Indicates the authority who published the protocol (e.g. ACIP) that is being followed.
References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.
Reference(UK Core Organization) Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) - ref-1:SHALL have a contained resource if a local reference is provided
reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))
- rim:n/a
- rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity)
- rim:N/A
|
| reference | Σ I | 0..1 | string | There are no (further) constraints on this element Element IdImmunization.protocolApplied.authority.reference Literal reference, Relative, internal or absolute URL Definition A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.
string Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
|
| type | Σ | 0..1 | uriBinding | Element IdImmunization.protocolApplied.authority.type Type the reference refers to (e.g. "Patient") Definition The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.
The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).
This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified.
uri Binding A resource (or, for logical models, the URI of the logical model). ResourceType (extensible)Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
|
| identifier | Σ | 0..1 | Identifier | There are no (further) constraints on this element Element IdImmunization.protocolApplied.authority.identifier Logical reference, when literal reference is not known Definition An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.
When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference
Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.
Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).
Identifier Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
- rim:n/a
- v2:CX / EI (occasionally, more often EI maps to a resource id or a URL)
- rim:II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT]
- servd:Identifier
- rim:.identifier
|
| use | Σ ?! | 0..1 | codeBinding | There are no (further) constraints on this element Element IdImmunization.protocolApplied.authority.identifier.use usual | official | temp | secondary | old (If known) Definition The purpose of this identifier.
Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.
Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.
code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required)Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
- rim:n/a
- v2:N/A
- rim:Role.code or implied by context
|
| type | Σ | 0..1 | CodeableConceptBinding | There are no (further) constraints on this element Element IdImmunization.protocolApplied.authority.identifier.type Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.
Allows users to make use of identifiers when the identifier system is not known.
This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.
CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible)Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
- rim:n/a
- v2:CE/CNE/CWE
- rim:CD
- orim:fhir:CodeableConcept rdfs:subClassOf dt:CD
- v2:CX.5
- rim:Role.code or implied by context
|
| system | Σ | 0..1 | uri | There are no (further) constraints on this element Element IdImmunization.protocolApplied.authority.identifier.system The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique.
There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.
Identifier.system is always case sensitive.
uri Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
Generalhttp://www.acme.com/identifiers/patient
Mappings- rim:n/a
- v2:CX.4 / EI-2-4
- rim:II.root or Role.id.root
- servd:./IdentifierType
|
| value | Σ | 0..1 | string | There are no (further) constraints on this element Element IdImmunization.protocolApplied.authority.identifier.value The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system.
If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.
string Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
Mappings- rim:n/a
- v2:CX.1 / EI.1
- rim:II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root)
- servd:./Value
|
| period | Σ I | 0..1 | Period | There are no (further) constraints on this element Element IdImmunization.protocolApplied.authority.identifier.period Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use.
A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times").
Period is not used for a duration (a measure of elapsed time). See Duration.
Period Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) - per-1:If present, start SHALL have a lower value than end
start.hasValue().not() or end.hasValue().not() or (start <= end)
- rim:n/a
- v2:DR
- rim:IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"]
- v2:CX.7 + CX.8
- rim:Role.effectiveTime or implied by context
- servd:./StartDate and ./EndDate
|
| assigner | Σ I | 0..1 | Reference(UK Core Organization) | Element IdImmunization.protocolApplied.authority.identifier.assigner Organization that issued id (may be just text) Definition Organization that issued/manages the identifier.
The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.
Reference(UK Core Organization) Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) - ref-1:SHALL have a contained resource if a local reference is provided
reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))
- rim:n/a
- rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity)
- v2:CX.4 / (CX.4,CX.9,CX.10)
- rim:II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper
- servd:./IdentifierIssuingAuthority
|
| display | Σ | 0..1 | string | There are no (further) constraints on this element Element IdImmunization.protocolApplied.authority.display Text alternative for the resource Definition Plain text narrative that identifies the resource in addition to the resource reference.
This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.
string Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
|
| targetDisease | | 0..* | CodeableConcept | There are no (further) constraints on this element Element IdImmunization.protocolApplied.targetDisease Vaccine preventatable disease being targetted Definition The vaccine preventable disease the dose is being administered against.
Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination.
CodeableConcept Binding The vaccine preventable disease the dose is being administered for. ImmunizationTargetDiseaseCodes (example)Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
- rim:n/a
- v2:CE/CNE/CWE
- rim:CD
- orim:fhir:CodeableConcept rdfs:subClassOf dt:CD
- rim:N/A
|
| doseNumber[x] | | 1..1 | | There are no (further) constraints on this element Element IdImmunization.protocolApplied.doseNumber[x] Dose number within series Definition Nominal position in a series.
The use of an integer is preferred if known. A string should only be used in cases where an integer is not available (such as when documenting a recurring booster dose).
- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
|
| doseNumberPositiveInt | | | positiveInt | There are no (further) constraints on this element Data Type positiveInt |
| doseNumberString | | | string | There are no (further) constraints on this element Data Type string |
| seriesDoses[x] | | 0..1 | | There are no (further) constraints on this element Element IdImmunization.protocolApplied.seriesDoses[x] Recommended number of doses for immunity Definition The recommended number of doses to achieve immunity.
The use of an integer is preferred if known. A string should only be used in cases where an integer is not available (such as when documenting a recurring booster dose).
- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
|
| seriesDosesPositiveInt | | | positiveInt | There are no (further) constraints on this element Data Type positiveInt |
| seriesDosesString | | | string | There are no (further) constraints on this element Data Type string |
