UK Core Implementation Guide 1.0.0

Extension Library

This extension library contains all the extensions Clinically and Technically Assured for use with UK Core. The profiles are found in the Profiles Index. The table below lists all the current extensions and the context of use. The context of use column indicates the profile and /or element where the extension may be applied. The type column indicates whether the extension is a modifierExtension or not. The general rule is extensions can be ignored by receivers*. When a modifierExtension is received it SHALL NOT be ignored as it modifies the meaning of the element or elements that contains it. Typically, this means information that qualifies or negates the primary meaning of the element that contains it.

For more information from HL7 about FHIR extensions.

For more information from HL7 about FHIR modifierExtensions.

*There may be specific use cases where this is not the case and the Domain Implementation Guidance associated with the use case SHOULD be consulted.

Important

The Extensions are rendered in several formats:

Snapshot: a fully calculated form of the structure that is not dependent on any other structure
Differential: this describes only the differences that the Extension makes relative to the structure definition (FHIR resource) they constrain
Hybrid: a hybrid view of the snapshot and differential views
Table: a tabular view of the Extension elements
XML: a rendering of a XML view of the Extension
JSON: a rendering of a JSON view of the Extension

Further information from HL7 relating to extensibility is available.

Important

The Extensions listed below have been defined as UK Core extensions. Also included in this library are some HL7 common extensions which have been added to the UK Core profiles because they have been deemed to be "core" to UK FHIR data exchanges. These will have a page with guidance on usage in the UK and examples to illustrate usage. Note: implementers of UK Core MAY use any HL7 common extension from the HL7 standard regardless of whether the extension is included in this implementation guide. The list of common extensions in FHIR R4 is available in the HL7 extension registry.

Implementers of the UK Core profiles MAY also create their own Extensions where required, but are encouraged to engage with the UK Core development process to get their extensions adopted into the UK Core for wider use by the UK FHIR Community.

Extensions	Status	Context of Use	Related Profile	Modifier Extension	C&TA Sprint
Extension UKCore-AddressKey	active	Address	Profile UKCore-Patient	NO	1
Extension UKCore-AllergyIntoleranceEnd	active	AllergyIntolerance	Profile UKCore-AllergyIntolerance	NO	2
Extension UKCore-BirthSex	active	Patient	Profile UKCore-Patient	NO	1
Extension UKCore-CodingSCTDescDisplay	active	Coding	All clinical profiles that can use SNOMED CT. See the extension page for information about how this is used in profiles.	NO	2
Extension UKCore-ContactPreference	active	Patient, RelatedPerson	Profile UKCore-Patient	NO	1
Extension UKCore-ContactRank	active	Patient.contact, RelatedPerson	Profile UKCore-Patient	NO	1
Extension UKCore-CopyCorrespondenceIndicator	active	Patient.contact, RelatedPerson	Profile UKCore-Patient	NO	1
Extension UKCore-DeathNotificationStatus	active	Patient	Profile UKCore-Patient	NO	1
Extension UKCore-EthnicCategory	active	Patient	Profile UKCore-Patient	NO	1
Extension UKCore-MainLocation	active	Organization	Profile UKCore-Organization	NO	1
Extension UKCore-MedicationPrescribingOrganizationType	active	MedicationStatement	Profile UKCore-MedicationStatement	NO	3
Extension UKCore-MedicationStatementLastIssueDate	active	MedicationStatement	Profile UKCore-MedicationStatement	NO	3
Extension UKCore-MedicationRepeatInformation	active	MedicationRequest	Profile UKCore-MedicationRequest	NO	3
Extension UKCore-MedicationTradeFamily	active	Medication	Profile UKCore-Medication	NO	3
Extension UKCore-NHSNumberVerificationStatus	active	Patient.identifier	Profile UKCore-Patient	NO	1
Extension UKCore-OtherContactSystem	active	ContactPoint.system	Profile UKCore-Patient	NO	1
Extension UKCore-ParentPresent	active	Immunization	Profile UKCore-Immunization	NO	3
Extension UKCore-PharmacistVerifiedIndicator	active	MedicationStatement	Profile UKCore-MedicationStatement	NO	3
Extension UKCore-ResidentialStatus	active	Patient	Profile UKCore-Patient	NO	1
Extension UKCore-VaccinationProcedure	active	Immunization	Profile UKCore-Immunization	NO	3

HL7 Common Extensions

The following HL7 extensions have been agreed as suitable to be included for use with the UK Core Profiles Index because the use case for an Extension is fully met by a pre-existing HL7 common Extension. All other HL7 common extensions MAY be used to extend the UK Core if required by the local implementation.

HL7 Common Extension	Context of Use	Related Profile	Modifier Extension
Common Extension coding-sctdescid	Coding	Use on Element ID Coding	NO
Common Extension organization-period	Organization	Profile UKCore-Organization	NO
Common Extension patient-birthPlace	Patient	Profile UKCore-Patient	NO
Common Extension patient-birthTime	Patient.birthDate	Profile UKCore-Patient	NO
Common Extension patient-cadavericDonor	Patient	Profile UKCore-Patient	NO
Common Extension patient-interpreterRequired	Patient	Profile UKCore-Patient	NO

StructureDefinition Extension-UKCoreAddressKey

This carries an address key which will be included in an address.

Purpose

This extension extends the Address datatype to support the exchange of the type of address key and the address key value, which are currently not supported by the FHIR standard.

Context of Use
Use on element	Address

Snapshot View

Extension	I		Extension	Element Id Extension Short description An extension carrying the address key and type Definition An extension carrying the address key and type. Data Type Extension Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
extension	I	0..*	Extension	Element Id Extension.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data Type Extension Sliced: Unordered, Open, by url(Value) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
type	I	1..1	Extension	Element Id Extension.extension:type Short description Address Key Type Alternate names extensions, user content Definition To identify the type of Address Key recorded. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data Type Extension Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
url		1..1	System.StringFixed Value	Element Id Extension.extension:type.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data Type System.String Fixed Value type Mappings rim:N/A
value[x]		1..1	Binding	Element Id Extension.extension:type.value[x] Short description Address Key Type Definition To identify the type of Address Key recorded. Binding To identify the type of Address Key recorded UKCoreAddressKeyType (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
valueCoding			Coding	Data Type Coding
value	I	1..1	Extension	Element Id Extension.extension:value Short description Address key value Alternate names extensions, user content Definition To record the value for the address key. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data Type Extension Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
url		1..1	System.StringFixed Value	Element Id Extension.extension:value.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data Type System.String Fixed Value value Mappings rim:N/A
value[x]		1..1		Element Id Extension.extension:value.value[x] Short description Address key value Definition To record the value for the address key. Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
valueString			string	Data Type string
url		1..1	System.StringFixed Value	Element Id Extension.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data Type System.String Fixed Value https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-AddressKey Mappings rim:N/A
value[x]		0..0		There are no (further) constraints on this element Element Id Extension.value[x] Short description Value of extension Definition Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A

Differential View

Extension	I		Extension	Element Id Extension Short description An extension carrying the address key and type Definition An extension carrying the address key and type. Data Type Extension Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
extension	I	0..*	Extension	Element Id Extension.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data Type Extension Sliced: Unordered, Open, by url(Value) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
type	I	1..1	Extension	Element Id Extension.extension:type Short description Address Key Type Alternate names extensions, user content Definition To identify the type of Address Key recorded. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data Type Extension Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
url		1..1	System.StringFixed Value	Element Id Extension.extension:type.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data Type System.String Fixed Value type Mappings rim:N/A
value[x]		1..1	Binding	Element Id Extension.extension:type.value[x] Short description Address Key Type Definition To identify the type of Address Key recorded. Binding To identify the type of Address Key recorded UKCoreAddressKeyType (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
valueCoding			Coding	Data Type Coding
value	I	1..1	Extension	Element Id Extension.extension:value Short description Address key value Alternate names extensions, user content Definition To record the value for the address key. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data Type Extension Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
url		1..1	System.StringFixed Value	Element Id Extension.extension:value.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data Type System.String Fixed Value value Mappings rim:N/A
value[x]		1..1		Element Id Extension.extension:value.value[x] Short description Address key value Definition To record the value for the address key. Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
valueString			string	Data Type string
url		1..1	System.StringFixed Value	Element Id Extension.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data Type System.String Fixed Value https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-AddressKey Mappings rim:N/A
value[x]		0..0		There are no (further) constraints on this element Element Id Extension.value[x] Short description Value of extension Definition Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A

Hybrid View

Extension	I		Extension	Element Id Extension Short description An extension carrying the address key and type Definition An extension carrying the address key and type. Data Type Extension Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
extension	I	0..*	Extension	Element Id Extension.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data Type Extension Sliced: Unordered, Open, by url(Value) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
type	I	1..1	Extension	Element Id Extension.extension:type Short description Address Key Type Alternate names extensions, user content Definition To identify the type of Address Key recorded. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data Type Extension Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
url		1..1	System.StringFixed Value	Element Id Extension.extension:type.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data Type System.String Fixed Value type Mappings rim:N/A
value[x]		1..1	Binding	Element Id Extension.extension:type.value[x] Short description Address Key Type Definition To identify the type of Address Key recorded. Binding To identify the type of Address Key recorded UKCoreAddressKeyType (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
valueCoding			Coding	Data Type Coding
value	I	1..1	Extension	Element Id Extension.extension:value Short description Address key value Alternate names extensions, user content Definition To record the value for the address key. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data Type Extension Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
url		1..1	System.StringFixed Value	Element Id Extension.extension:value.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data Type System.String Fixed Value value Mappings rim:N/A
value[x]		1..1		Element Id Extension.extension:value.value[x] Short description Address key value Definition To record the value for the address key. Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
valueString			string	Data Type string
url		1..1	System.StringFixed Value	Element Id Extension.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data Type System.String Fixed Value https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-AddressKey Mappings rim:N/A
value[x]		0..0		There are no (further) constraints on this element Element Id Extension.value[x] Short description Value of extension Definition Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A

Table View

Extension		..
Extension.extension		..
Extension.extension		1..1
Extension.extension.url		..
Extension.extension.value[x]	Coding	1..
Extension.extension		1..1
Extension.extension.url		..
Extension.extension.value[x]	string	1..
Extension.url		..
Extension.value[x]		..0

XML View

<StructureDefinition xmlns="http://hl7.org/fhir">
    <id value="Extension-UKCore-AddressKey" />
    <url value="https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-AddressKey" />
    <version value="2.1.0" />
    <name value="ExtensionUKCoreAddressKey" />
    <title value="Extension UK Core Address Key" />
    <status value="active" />
    <date value="2021-09-10" />
    <publisher value="HL7 UK" />
    <contact>
        <name value="HL7 UK" />
        <telecom>
            <system value="email" />
            <value value="secretariat@hl7.org.uk" />
            <use value="work" />
            <rank value="1" />
        </telecom>
    </contact>
    <contact>
        <name value="NHS Digital" />
        <telecom>
            <system value="email" />
            <value value="interoperabilityteam@nhs.net" />
            <use value="work" />
            <rank value="2" />
        </telecom>
    </contact>
    <description value="This carries an address identifier which will be included in an address." />
    <purpose value="This extension extends the Address datatype to support the exchange of the type of address identifier and the address identifier value, which are currently not supported by the FHIR standard." />
    <copyright value="Copyright &#169; 2021+ HL7 UK Licensed under the Apache License, Version 2.0 (the &quot;License&quot;); you may not use this file except in compliance with the License. You may obtain a copy of the License at  http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an &quot;AS IS&quot; BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. HL7&#174; FHIR&#174; standard Copyright &#169; 2011+ HL7 The HL7&#174; FHIR&#174; standard is used under the FHIR license. You may obtain a copy of the FHIR license at  https://www.hl7.org/fhir/license.html." />
    <fhirVersion value="4.0.1" />
    <mapping>
        <identity value="rim" />
        <uri value="http://hl7.org/v3" />
        <name value="RIM Mapping" />
    </mapping>
    <kind value="complex-type" />
    <abstract value="false" />
    <context>
        <type value="element" />
        <expression value="Address" />
    </context>
    <type value="Extension" />
    <baseDefinition value="http://hl7.org/fhir/StructureDefinition/Extension" />
    <derivation value="constraint" />
    <differential>
        <element id="Extension">
            <path value="Extension" />
            <short value="An extension carrying the address key and type" />
            <definition value="An extension carrying the address key and type." />
        </element>
        <element id="Extension.extension">
            <path value="Extension.extension" />
            <slicing>
                <discriminator>
                    <type value="value" />
                    <path value="url" />
                </discriminator>
                <rules value="open" />
            </slicing>
        </element>
        <element id="Extension.extension:type">
            <path value="Extension.extension" />
            <sliceName value="type" />
            <short value="Address Key Type" />
            <definition value="To identify the type of Address Key recorded." />
            <min value="1" />
            <max value="1" />
        </element>
        <element id="Extension.extension:type.url">
            <path value="Extension.extension.url" />
            <fixedUri value="type" />
        </element>
        <element id="Extension.extension:type.value[x]">
            <path value="Extension.extension.value[x]" />
            <short value="Address Key Type" />
            <definition value="To identify the type of Address Key recorded." />
            <min value="1" />
            <type>
                <code value="Coding" />
            </type>
            <binding>
                <strength value="extensible" />
                <description value="To identify the type of Address Key recorded" />
                <valueSet value="https://fhir.hl7.org.uk/ValueSet/UKCore-AddressKeyType" />
            </binding>
        </element>
        <element id="Extension.extension:value">
            <path value="Extension.extension" />
            <sliceName value="value" />
            <short value="Address key value" />
            <definition value="To record the value for the address key." />
            <min value="1" />
            <max value="1" />
        </element>
        <element id="Extension.extension:value.url">
            <path value="Extension.extension.url" />
            <fixedUri value="value" />
        </element>
        <element id="Extension.extension:value.value[x]">
            <path value="Extension.extension.value[x]" />
            <short value="Address key value" />
            <definition value="To record the value for the address key." />
            <min value="1" />
            <type>
                <code value="string" />
            </type>
        </element>
        <element id="Extension.url">
            <path value="Extension.url" />
            <fixedUri value="https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-AddressKey" />
        </element>
        <element id="Extension.value[x]">
            <path value="Extension.value[x]" />
            <max value="0" />
        </element>
    </differential>
</StructureDefinition>

JSON View

{
    "resourceType": "StructureDefinition",
    "id": "Extension-UKCore-AddressKey",
    "url": "https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-AddressKey",
    "version": "2.1.0",
    "name": "ExtensionUKCoreAddressKey",
    "title": "Extension UK Core Address Key",
    "status": "active",
    "date": "2021-09-10",
    "publisher": "HL7 UK",
    "contact":  [
        {
            "name": "HL7 UK",
            "telecom":  [
                {
                    "system": "email",
                    "value": "secretariat@hl7.org.uk",
                    "use": "work",
                    "rank": 1
                }
            ]
        },
        {
            "name": "NHS Digital",
            "telecom":  [
                {
                    "system": "email",
                    "value": "interoperabilityteam@nhs.net",
                    "use": "work",
                    "rank": 2
                }
            ]
        }
    ],
    "description": "This carries an address identifier which will be included in an address.",
    "purpose": "This extension extends the Address datatype to support the exchange of the type of address identifier and the address identifier value, which are currently not supported by the FHIR standard.",
    "copyright": "Copyright © 2021+ HL7 UK Licensed under the Apache License, Version 2.0 (the \"License\"); you may not use this file except in compliance with the License. You may obtain a copy of the License at  http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an \"AS IS\" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. HL7® FHIR® standard Copyright © 2011+ HL7 The HL7® FHIR® standard is used under the FHIR license. You may obtain a copy of the FHIR license at  https://www.hl7.org/fhir/license.html.",
    "fhirVersion": "4.0.1",
    "mapping":  [
        {
            "identity": "rim",
            "uri": "http://hl7.org/v3",
            "name": "RIM Mapping"
        }
    ],
    "kind": "complex-type",
    "abstract": false,
    "context":  [
        {
            "type": "element",
            "expression": "Address"
        }
    ],
    "type": "Extension",
    "baseDefinition": "http://hl7.org/fhir/StructureDefinition/Extension",
    "derivation": "constraint",
    "differential": {
        "element":  [
            {
                "id": "Extension",
                "path": "Extension",
                "short": "An extension carrying the address key and type",
                "definition": "An extension carrying the address key and type."
            },
            {
                "id": "Extension.extension",
                "path": "Extension.extension",
                "slicing": {
                    "discriminator":  [
                        {
                            "type": "value",
                            "path": "url"
                        }
                    ],
                    "rules": "open"
                }
            },
            {
                "id": "Extension.extension:type",
                "path": "Extension.extension",
                "sliceName": "type",
                "short": "Address Key Type",
                "definition": "To identify the type of Address Key recorded.",
                "min": 1,
                "max": "1"
            },
            {
                "id": "Extension.extension:type.url",
                "path": "Extension.extension.url",
                "fixedUri": "type"
            },
            {
                "id": "Extension.extension:type.value[x]",
                "path": "Extension.extension.value[x]",
                "short": "Address Key Type",
                "definition": "To identify the type of Address Key recorded.",
                "min": 1,
                "type":  [
                    {
                        "code": "Coding"
                    }
                ],
                "binding": {
                    "strength": "extensible",
                    "description": "To identify the type of Address Key recorded",
                    "valueSet": "https://fhir.hl7.org.uk/ValueSet/UKCore-AddressKeyType"
                }
            },
            {
                "id": "Extension.extension:value",
                "path": "Extension.extension",
                "sliceName": "value",
                "short": "Address key value",
                "definition": "To record the value for the address key.",
                "min": 1,
                "max": "1"
            },
            {
                "id": "Extension.extension:value.url",
                "path": "Extension.extension.url",
                "fixedUri": "value"
            },
            {
                "id": "Extension.extension:value.value[x]",
                "path": "Extension.extension.value[x]",
                "short": "Address key value",
                "definition": "To record the value for the address key.",
                "min": 1,
                "type":  [
                    {
                        "code": "string"
                    }
                ]
            },
            {
                "id": "Extension.url",
                "path": "Extension.url",
                "fixedUri": "https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-AddressKey"
            },
            {
                "id": "Extension.value[x]",
                "path": "Extension.value[x]",
                "max": "0"
            }
        ]
    }
}

Examples

An example to illustrate how the address key information is carried in a patient example.
Example UKCore-Patient-Extension-AddressKey

StructureDefinition Extension-UKCore-AllergyIntoleranceEnd

Supports the date when the allergy or intolerance was no longer valid, and/or, the reason why the allergy or intolerance is no longer valid.

Purpose

This extension extends the AllergyIntolerance resource to support the exchange of information describing the date when the allergy or intolerance was no longer valid, and/or, the reason why the allergy or intolerance is no longer valid, which is currently not supported by the FHIR standard.

Guidance

An optional extension to record the date and reason when the allergy was no longer clinically active.
If the clinicalStatus is active then this extension SHALL be omitted.
If the clinicalStatus is inactive or resolved then the date and reason when the allergy was identified as no longer active SHOULD be populated.

Context of Use
Use on element	AllergyIntolerance.clinicalStatus

Snapshot View

Extension	I		Extension	Element Id Extension Short description Supports the date when the allergy or intolerance was no longer valid, and/or, the reason why the allergy or intolerance is no longer valid. Definition Supports the date when the allergy or intolerance was no longer valid, and/or, the reason why the allergy or intolerance is no longer valid. Data Type Extension Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
extension	I	0..*	Extension	Element Id Extension.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data Type Extension Sliced: Unordered, Open, by url(Value) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
endDate	I	0..1	Extension	Element Id Extension.extension:endDate Short description The date the allergy or intolerance was recorded as no longer valid Alternate names extensions, user content Definition The date the allergy or intolerance was recorded as no longer valid. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data Type Extension Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
url		1..1	System.StringFixed Value	Element Id Extension.extension:endDate.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data Type System.String Fixed Value endDate Mappings rim:N/A
value[x]		1..1		Element Id Extension.extension:endDate.value[x] Short description The date the allergy was recorded as no longer valid Definition The date the allergy was recorded as no longer valid. Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
valueDateTime			dateTime	Data Type dateTime
reasonEnded	I	0..1	Extension	Element Id Extension.extension:reasonEnded Short description The reason why the allergy or intolerance has been resolved Alternate names extensions, user content Definition The reason why the allergy or intolerance has been resolved. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data Type Extension Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
url		1..1	System.StringFixed Value	Element Id Extension.extension:reasonEnded.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data Type System.String Fixed Value reasonEnded Mappings rim:N/A
value[x]		1..1		Element Id Extension.extension:reasonEnded.value[x] Short description The reason why the allergy or intolerance has been resolved Definition The reason why the allergy or intolerance has been resolved. Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
valueString			string	Data Type string
url		1..1	System.StringFixed Value	Element Id Extension.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data Type System.String Fixed Value https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-AllergyIntoleranceEnd Mappings rim:N/A
value[x]		0..0		There are no (further) constraints on this element Element Id Extension.value[x] Short description Value of extension Definition Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A

Differential View

Extension	I		Extension	Element Id Extension Short description Supports the date when the allergy or intolerance was no longer valid, and/or, the reason why the allergy or intolerance is no longer valid. Definition Supports the date when the allergy or intolerance was no longer valid, and/or, the reason why the allergy or intolerance is no longer valid. Data Type Extension Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
extension	I	0..*	Extension	Element Id Extension.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data Type Extension Sliced: Unordered, Open, by url(Value) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
endDate	I	0..1	Extension	Element Id Extension.extension:endDate Short description The date the allergy or intolerance was recorded as no longer valid Alternate names extensions, user content Definition The date the allergy or intolerance was recorded as no longer valid. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data Type Extension Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
url		1..1	System.StringFixed Value	Element Id Extension.extension:endDate.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data Type System.String Fixed Value endDate Mappings rim:N/A
value[x]		1..1		Element Id Extension.extension:endDate.value[x] Short description The date the allergy was recorded as no longer valid Definition The date the allergy was recorded as no longer valid. Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
valueDateTime			dateTime	Data Type dateTime
reasonEnded	I	0..1	Extension	Element Id Extension.extension:reasonEnded Short description The reason why the allergy or intolerance has been resolved Alternate names extensions, user content Definition The reason why the allergy or intolerance has been resolved. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data Type Extension Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
url		1..1	System.StringFixed Value	Element Id Extension.extension:reasonEnded.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data Type System.String Fixed Value reasonEnded Mappings rim:N/A
value[x]		1..1		Element Id Extension.extension:reasonEnded.value[x] Short description The reason why the allergy or intolerance has been resolved Definition The reason why the allergy or intolerance has been resolved. Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
valueString			string	Data Type string
url		1..1	System.StringFixed Value	Element Id Extension.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data Type System.String Fixed Value https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-AllergyIntoleranceEnd Mappings rim:N/A
value[x]		0..0		There are no (further) constraints on this element Element Id Extension.value[x] Short description Value of extension Definition Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A

Hybrid View

Extension	I		Extension	Element Id Extension Short description Supports the date when the allergy or intolerance was no longer valid, and/or, the reason why the allergy or intolerance is no longer valid. Definition Supports the date when the allergy or intolerance was no longer valid, and/or, the reason why the allergy or intolerance is no longer valid. Data Type Extension Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
extension	I	0..*	Extension	Element Id Extension.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data Type Extension Sliced: Unordered, Open, by url(Value) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
endDate	I	0..1	Extension	Element Id Extension.extension:endDate Short description The date the allergy or intolerance was recorded as no longer valid Alternate names extensions, user content Definition The date the allergy or intolerance was recorded as no longer valid. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data Type Extension Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
url		1..1	System.StringFixed Value	Element Id Extension.extension:endDate.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data Type System.String Fixed Value endDate Mappings rim:N/A
value[x]		1..1		Element Id Extension.extension:endDate.value[x] Short description The date the allergy was recorded as no longer valid Definition The date the allergy was recorded as no longer valid. Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
valueDateTime			dateTime	Data Type dateTime
reasonEnded	I	0..1	Extension	Element Id Extension.extension:reasonEnded Short description The reason why the allergy or intolerance has been resolved Alternate names extensions, user content Definition The reason why the allergy or intolerance has been resolved. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data Type Extension Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
url		1..1	System.StringFixed Value	Element Id Extension.extension:reasonEnded.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data Type System.String Fixed Value reasonEnded Mappings rim:N/A
value[x]		1..1		Element Id Extension.extension:reasonEnded.value[x] Short description The reason why the allergy or intolerance has been resolved Definition The reason why the allergy or intolerance has been resolved. Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
valueString			string	Data Type string
url		1..1	System.StringFixed Value	Element Id Extension.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data Type System.String Fixed Value https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-AllergyIntoleranceEnd Mappings rim:N/A
value[x]		0..0		There are no (further) constraints on this element Element Id Extension.value[x] Short description Value of extension Definition Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A

Table View

Extension		..1
Extension.extension		0..
Extension.extension		0..1
Extension.extension.url		..
Extension.extension.value[x]	dateTime	1..
Extension.extension		0..1
Extension.extension.url		..
Extension.extension.value[x]	string	1..
Extension.url		..
Extension.value[x]		..0

XML View

<StructureDefinition xmlns="http://hl7.org/fhir">
    <id value="Extension-UKCore-AllergyIntoleranceEnd" />
    <url value="https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-AllergyIntoleranceEnd" />
    <version value="2.2.0" />
    <name value="ExtensionUKCoreAllergyIntoleranceEnd" />
    <title value="Extension UK Core Allergy Intolerance End" />
    <status value="active" />
    <date value="2022-08-26" />
    <publisher value="HL7 UK" />
    <contact>
        <name value="HL7 UK" />
        <telecom>
            <system value="email" />
            <value value="secretariat@hl7.org.uk" />
            <use value="work" />
            <rank value="1" />
        </telecom>
    </contact>
    <contact>
        <name value="NHS Digital" />
        <telecom>
            <system value="email" />
            <value value="interoperabilityteam@nhs.net" />
            <use value="work" />
            <rank value="2" />
        </telecom>
    </contact>
    <description value="Supports the date when the allergy or intolerance was no longer valid, and/or, the reason why the allergy or intolerance is no longer valid." />
    <purpose value="This extension extends the AllergyIntolerance resource to support the exchange of information describing the date when the allergy or intolerance was no longer valid, and/or, the reason why the allergy or intolerance is no longer valid, which is currently not supported by the FHIR standard." />
    <copyright value="Copyright &#169; 2021+ HL7 UK Licensed under the Apache License, Version 2.0 (the &quot;License&quot;); you may not use this file except in compliance with the License. You may obtain a copy of the License at  http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an &quot;AS IS&quot; BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. HL7&#174; FHIR&#174; standard Copyright &#169; 2011+ HL7 The HL7&#174; FHIR&#174; standard is used under the FHIR license. You may obtain a copy of the FHIR license at  https://www.hl7.org/fhir/license.html." />
    <fhirVersion value="4.0.1" />
    <mapping>
        <identity value="rim" />
        <uri value="http://hl7.org/v3" />
        <name value="RIM Mapping" />
    </mapping>
    <kind value="complex-type" />
    <abstract value="false" />
    <context>
        <type value="element" />
        <expression value="AllergyIntolerance.clinicalStatus" />
    </context>
    <type value="Extension" />
    <baseDefinition value="http://hl7.org/fhir/StructureDefinition/Extension" />
    <derivation value="constraint" />
    <differential>
        <element id="Extension">
            <path value="Extension" />
            <short value="Supports the date when the allergy or intolerance was no longer valid, and/or, the reason why the allergy or intolerance is no longer valid." />
            <definition value="Supports the date when the allergy or intolerance was no longer valid, and/or, the reason why the allergy or intolerance is no longer valid." />
            <max value="1" />
        </element>
        <element id="Extension.extension">
            <path value="Extension.extension" />
            <slicing>
                <discriminator>
                    <type value="value" />
                    <path value="url" />
                </discriminator>
                <rules value="open" />
            </slicing>
            <min value="0" />
        </element>
        <element id="Extension.extension:endDate">
            <path value="Extension.extension" />
            <sliceName value="endDate" />
            <short value="The date the allergy or intolerance was recorded as no longer valid" />
            <definition value="The date the allergy or intolerance was recorded as no longer valid." />
            <min value="0" />
            <max value="1" />
        </element>
        <element id="Extension.extension:endDate.url">
            <path value="Extension.extension.url" />
            <fixedUri value="endDate" />
        </element>
        <element id="Extension.extension:endDate.value[x]">
            <path value="Extension.extension.value[x]" />
            <short value="The date the allergy was recorded as no longer valid" />
            <definition value="The date the allergy was recorded as no longer valid." />
            <min value="1" />
            <type>
                <code value="dateTime" />
            </type>
        </element>
        <element id="Extension.extension:reasonEnded">
            <path value="Extension.extension" />
            <sliceName value="reasonEnded" />
            <short value="The reason why the allergy or intolerance has been resolved" />
            <definition value="The reason why the allergy or intolerance has been resolved." />
            <min value="0" />
            <max value="1" />
        </element>
        <element id="Extension.extension:reasonEnded.url">
            <path value="Extension.extension.url" />
            <fixedUri value="reasonEnded" />
        </element>
        <element id="Extension.extension:reasonEnded.value[x]">
            <path value="Extension.extension.value[x]" />
            <short value="The reason why the allergy or intolerance has been resolved" />
            <definition value="The reason why the allergy or intolerance has been resolved." />
            <min value="1" />
            <type>
                <code value="string" />
            </type>
        </element>
        <element id="Extension.url">
            <path value="Extension.url" />
            <fixedUri value="https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-AllergyIntoleranceEnd" />
        </element>
        <element id="Extension.value[x]">
            <path value="Extension.value[x]" />
            <max value="0" />
        </element>
    </differential>
</StructureDefinition>

JSON View

{
    "resourceType": "StructureDefinition",
    "id": "Extension-UKCore-AllergyIntoleranceEnd",
    "url": "https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-AllergyIntoleranceEnd",
    "version": "2.2.0",
    "name": "ExtensionUKCoreAllergyIntoleranceEnd",
    "title": "Extension UK Core Allergy Intolerance End",
    "status": "active",
    "date": "2022-08-26",
    "publisher": "HL7 UK",
    "contact":  [
        {
            "name": "HL7 UK",
            "telecom":  [
                {
                    "system": "email",
                    "value": "secretariat@hl7.org.uk",
                    "use": "work",
                    "rank": 1
                }
            ]
        },
        {
            "name": "NHS Digital",
            "telecom":  [
                {
                    "system": "email",
                    "value": "interoperabilityteam@nhs.net",
                    "use": "work",
                    "rank": 2
                }
            ]
        }
    ],
    "description": "Supports the date when the allergy or intolerance was no longer valid, and/or, the reason why the allergy or intolerance is no longer valid.",
    "purpose": "This extension extends the AllergyIntolerance resource to support the exchange of information describing the date when the allergy or intolerance was no longer valid, and/or, the reason why the allergy or intolerance is no longer valid, which is currently not supported by the FHIR standard.",
    "copyright": "Copyright © 2021+ HL7 UK Licensed under the Apache License, Version 2.0 (the \"License\"); you may not use this file except in compliance with the License. You may obtain a copy of the License at  http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an \"AS IS\" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. HL7® FHIR® standard Copyright © 2011+ HL7 The HL7® FHIR® standard is used under the FHIR license. You may obtain a copy of the FHIR license at  https://www.hl7.org/fhir/license.html.",
    "fhirVersion": "4.0.1",
    "mapping":  [
        {
            "identity": "rim",
            "uri": "http://hl7.org/v3",
            "name": "RIM Mapping"
        }
    ],
    "kind": "complex-type",
    "abstract": false,
    "context":  [
        {
            "type": "element",
            "expression": "AllergyIntolerance.clinicalStatus"
        }
    ],
    "type": "Extension",
    "baseDefinition": "http://hl7.org/fhir/StructureDefinition/Extension",
    "derivation": "constraint",
    "differential": {
        "element":  [
            {
                "id": "Extension",
                "path": "Extension",
                "short": "Supports the date when the allergy or intolerance was no longer valid, and/or, the reason why the allergy or intolerance is no longer valid.",
                "definition": "Supports the date when the allergy or intolerance was no longer valid, and/or, the reason why the allergy or intolerance is no longer valid.",
                "max": "1"
            },
            {
                "id": "Extension.extension",
                "path": "Extension.extension",
                "slicing": {
                    "discriminator":  [
                        {
                            "type": "value",
                            "path": "url"
                        }
                    ],
                    "rules": "open"
                },
                "min": 0
            },
            {
                "id": "Extension.extension:endDate",
                "path": "Extension.extension",
                "sliceName": "endDate",
                "short": "The date the allergy or intolerance was recorded as no longer valid",
                "definition": "The date the allergy or intolerance was recorded as no longer valid.",
                "min": 0,
                "max": "1"
            },
            {
                "id": "Extension.extension:endDate.url",
                "path": "Extension.extension.url",
                "fixedUri": "endDate"
            },
            {
                "id": "Extension.extension:endDate.value[x]",
                "path": "Extension.extension.value[x]",
                "short": "The date the allergy was recorded as no longer valid",
                "definition": "The date the allergy was recorded as no longer valid.",
                "min": 1,
                "type":  [
                    {
                        "code": "dateTime"
                    }
                ]
            },
            {
                "id": "Extension.extension:reasonEnded",
                "path": "Extension.extension",
                "sliceName": "reasonEnded",
                "short": "The reason why the allergy or intolerance has been resolved",
                "definition": "The reason why the allergy or intolerance has been resolved.",
                "min": 0,
                "max": "1"
            },
            {
                "id": "Extension.extension:reasonEnded.url",
                "path": "Extension.extension.url",
                "fixedUri": "reasonEnded"
            },
            {
                "id": "Extension.extension:reasonEnded.value[x]",
                "path": "Extension.extension.value[x]",
                "short": "The reason why the allergy or intolerance has been resolved",
                "definition": "The reason why the allergy or intolerance has been resolved.",
                "min": 1,
                "type":  [
                    {
                        "code": "string"
                    }
                ]
            },
            {
                "id": "Extension.url",
                "path": "Extension.url",
                "fixedUri": "https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-AllergyIntoleranceEnd"
            },
            {
                "id": "Extension.value[x]",
                "path": "Extension.value[x]",
                "max": "0"
            }
        ]
    }
}

Examples

Example UKCore-AllergyIntolerance-Extension-AllergyIntolEnd

StructureDefinition Extension-UKCore-BirthSex

An extension to support the patient's phenotypic sex at birth.

Purpose

This extension extends the Patient resource to support the exchange of the patient's phenotypic sex at birth information as a Code, which is currently not supported by the FHIR standard.

Context of Use
Use on element	Patient

Snapshot View

Extension	I		Extension	Element Id Extension Short description An extension to support the patient's phenotypic sex at birth. Definition An extension to support the patient's phenotypic sex at birth. Data Type Extension Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
url		1..1	System.StringFixed Value	Element Id Extension.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data Type System.String Fixed Value https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-BirthSex Mappings rim:N/A
value[x]		1..1	Binding	Element Id Extension.value[x] Short description A code that defines a patient's phenotypic sex at birth. Definition A code that defines a patient's phenotypic sex at birth. Binding UKCoreBirthSex (required) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
valueCode			code	Data Type code

Differential View

Extension	I		Extension	Element Id Extension Short description An extension to support the patient's phenotypic sex at birth. Definition An extension to support the patient's phenotypic sex at birth. Data Type Extension Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
url		1..1	System.StringFixed Value	Element Id Extension.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data Type System.String Fixed Value https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-BirthSex Mappings rim:N/A
value[x]		1..1	Binding	Element Id Extension.value[x] Short description A code that defines a patient's phenotypic sex at birth. Definition A code that defines a patient's phenotypic sex at birth. Binding UKCoreBirthSex (required) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
valueCode			code	Data Type code

Hybrid View

Extension	I		Extension	Element Id Extension Short description An extension to support the patient's phenotypic sex at birth. Definition An extension to support the patient's phenotypic sex at birth. Data Type Extension Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
url		1..1	System.StringFixed Value	Element Id Extension.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data Type System.String Fixed Value https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-BirthSex Mappings rim:N/A
value[x]		1..1	Binding	Element Id Extension.value[x] Short description A code that defines a patient's phenotypic sex at birth. Definition A code that defines a patient's phenotypic sex at birth. Binding UKCoreBirthSex (required) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
valueCode			code	Data Type code

Table View

Extension		..1
Extension.url		..
Extension.value[x]	code	1..

XML View

<StructureDefinition xmlns="http://hl7.org/fhir">
    <id value="Extension-UKCore-BirthSex" />
    <url value="https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-BirthSex" />
    <version value="1.0.0" />
    <name value="ExtensionUKCoreBirthSex" />
    <title value="Extension UK Core Birth Sex" />
    <status value="active" />
    <date value="2021-09-10" />
    <publisher value="HL7 UK" />
    <contact>
        <name value="HL7 UK" />
        <telecom>
            <system value="email" />
            <value value="secretariat@hl7.org.uk" />
            <use value="work" />
            <rank value="1" />
        </telecom>
    </contact>
    <contact>
        <name value="NHS Digital" />
        <telecom>
            <system value="email" />
            <value value="interoperabilityteam@nhs.net" />
            <use value="work" />
            <rank value="2" />
        </telecom>
    </contact>
    <description value="An extension to support the patient&#39;s phenotypic sex at birth." />
    <purpose value="This extension extends the Patient resource to support the exchange of the patient&#39;s phenotypic sex at birth information, as a Codeable Concept, which is currently not supported by the FHIR standard." />
    <copyright value="Copyright &#169; 2021+ HL7 UK Licensed under the Apache License, Version 2.0 (the &quot;License&quot;); you may not use this file except in compliance with the License. You may obtain a copy of the License at  http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an &quot;AS IS&quot; BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. HL7&#174; FHIR&#174; standard Copyright &#169; 2011+ HL7 The HL7&#174; FHIR&#174; standard is used under the FHIR license. You may obtain a copy of the FHIR license at  https://www.hl7.org/fhir/license.html." />
    <fhirVersion value="4.0.1" />
    <mapping>
        <identity value="rim" />
        <uri value="http://hl7.org/v3" />
        <name value="RIM Mapping" />
    </mapping>
    <kind value="complex-type" />
    <abstract value="false" />
    <context>
        <type value="element" />
        <expression value="Patient" />
    </context>
    <type value="Extension" />
    <baseDefinition value="http://hl7.org/fhir/StructureDefinition/Extension" />
    <derivation value="constraint" />
    <differential>
        <element id="Extension">
            <path value="Extension" />
            <short value="An extension to support the patient&#39;s phenotypic sex at birth." />
            <definition value="An extension to support the patient&#39;s phenotypic sex at birth." />
            <max value="1" />
        </element>
        <element id="Extension.url">
            <path value="Extension.url" />
            <fixedUri value="https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-BirthSex" />
        </element>
        <element id="Extension.value[x]">
            <path value="Extension.value[x]" />
            <short value="A code that defines a patient&#39;s phenotypic sex at birth." />
            <definition value="A code that defines a patient&#39;s phenotypic sex at birth." />
            <min value="1" />
            <type>
                <code value="code" />
            </type>
            <binding>
                <strength value="required" />
                <valueSet value="https://fhir.hl7.org.uk/ValueSet/UKCore-BirthSex" />
            </binding>
        </element>
    </differential>
</StructureDefinition>

JSON View

{
    "resourceType": "StructureDefinition",
    "id": "Extension-UKCore-BirthSex",
    "url": "https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-BirthSex",
    "version": "1.0.0",
    "name": "ExtensionUKCoreBirthSex",
    "title": "Extension UK Core Birth Sex",
    "status": "active",
    "date": "2021-09-10",
    "publisher": "HL7 UK",
    "contact":  [
        {
            "name": "HL7 UK",
            "telecom":  [
                {
                    "system": "email",
                    "value": "secretariat@hl7.org.uk",
                    "use": "work",
                    "rank": 1
                }
            ]
        },
        {
            "name": "NHS Digital",
            "telecom":  [
                {
                    "system": "email",
                    "value": "interoperabilityteam@nhs.net",
                    "use": "work",
                    "rank": 2
                }
            ]
        }
    ],
    "description": "An extension to support the patient's phenotypic sex at birth.",
    "purpose": "This extension extends the Patient resource to support the exchange of the patient's phenotypic sex at birth information, as a Codeable Concept, which is currently not supported by the FHIR standard.",
    "copyright": "Copyright © 2021+ HL7 UK Licensed under the Apache License, Version 2.0 (the \"License\"); you may not use this file except in compliance with the License. You may obtain a copy of the License at  http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an \"AS IS\" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. HL7® FHIR® standard Copyright © 2011+ HL7 The HL7® FHIR® standard is used under the FHIR license. You may obtain a copy of the FHIR license at  https://www.hl7.org/fhir/license.html.",
    "fhirVersion": "4.0.1",
    "mapping":  [
        {
            "identity": "rim",
            "uri": "http://hl7.org/v3",
            "name": "RIM Mapping"
        }
    ],
    "kind": "complex-type",
    "abstract": false,
    "context":  [
        {
            "type": "element",
            "expression": "Patient"
        }
    ],
    "type": "Extension",
    "baseDefinition": "http://hl7.org/fhir/StructureDefinition/Extension",
    "derivation": "constraint",
    "differential": {
        "element":  [
            {
                "id": "Extension",
                "path": "Extension",
                "short": "An extension to support the patient's phenotypic sex at birth.",
                "definition": "An extension to support the patient's phenotypic sex at birth.",
                "max": "1"
            },
            {
                "id": "Extension.url",
                "path": "Extension.url",
                "fixedUri": "https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-BirthSex"
            },
            {
                "id": "Extension.value[x]",
                "path": "Extension.value[x]",
                "short": "A code that defines a patient's phenotypic sex at birth.",
                "definition": "A code that defines a patient's phenotypic sex at birth.",
                "min": 1,
                "type":  [
                    {
                        "code": "code"
                    }
                ],
                "binding": {
                    "strength": "required",
                    "valueSet": "https://fhir.hl7.org.uk/ValueSet/UKCore-BirthSex"
                }
            }
        ]
    }
}

JSON View

{
    "resourceType": "StructureDefinition",
    "id": "Extension-UKCore-BirthSex",
    "url": "https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-BirthSex",
    "version": "1.0.0",
    "name": "ExtensionUKCoreBirthSex",
    "title": "Extension UK Core Birth Sex",
    "status": "active",
    "date": "2021-09-10",
    "publisher": "HL7 UK",
    "contact":  [
        {
            "name": "HL7 UK",
            "telecom":  [
                {
                    "system": "email",
                    "value": "secretariat@hl7.org.uk",
                    "use": "work",
                    "rank": 1
                }
            ]
        },
        {
            "name": "NHS Digital",
            "telecom":  [
                {
                    "system": "email",
                    "value": "interoperabilityteam@nhs.net",
                    "use": "work",
                    "rank": 2
                }
            ]
        }
    ],
    "description": "An extension to support the patient's phenotypic sex at birth.",
    "purpose": "This extension extends the Patient resource to support the exchange of the patient's phenotypic sex at birth information, as a Codeable Concept, which is currently not supported by the FHIR standard.",
    "copyright": "Copyright © 2021+ HL7 UK Licensed under the Apache License, Version 2.0 (the \"License\"); you may not use this file except in compliance with the License. You may obtain a copy of the License at  http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an \"AS IS\" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. HL7® FHIR® standard Copyright © 2011+ HL7 The HL7® FHIR® standard is used under the FHIR license. You may obtain a copy of the FHIR license at  https://www.hl7.org/fhir/license.html.",
    "fhirVersion": "4.0.1",
    "mapping":  [
        {
            "identity": "rim",
            "uri": "http://hl7.org/v3",
            "name": "RIM Mapping"
        }
    ],
    "kind": "complex-type",
    "abstract": false,
    "context":  [
        {
            "type": "element",
            "expression": "Patient"
        }
    ],
    "type": "Extension",
    "baseDefinition": "http://hl7.org/fhir/StructureDefinition/Extension",
    "derivation": "constraint",
    "differential": {
        "element":  [
            {
                "id": "Extension",
                "path": "Extension",
                "short": "An extension to support the patient's phenotypic sex at birth.",
                "definition": "An extension to support the patient's phenotypic sex at birth.",
                "max": "1"
            },
            {
                "id": "Extension.url",
                "path": "Extension.url",
                "fixedUri": "https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-BirthSex"
            },
            {
                "id": "Extension.value[x]",
                "path": "Extension.value[x]",
                "short": "A code that defines a patient's phenotypic sex at birth.",
                "definition": "A code that defines a patient's phenotypic sex at birth.",
                "min": 1,
                "type":  [
                    {
                        "code": "code"
                    }
                ],
                "binding": {
                    "strength": "required",
                    "valueSet": "https://fhir.hl7.org.uk/ValueSet/UKCore-BirthSex"
                }
            }
        ]
    }
}

Examples

Example UKCore-Patient-Extension-BirthSex

StructureDefinition Extension-UKCore-CodingSCTDescDisplay

The description display term for a SNOMED CT concept. The display term is important to enable the representation of the exact term that was entered by the clinician that recorded the data, or the exact term that a legacy code e.g. a Read v2 code has been translated to using an assured mapping table.

Purpose

This extension supplements the coding-sctdescid extension to support the exchange of the selected display term for a SNOMED CT concept, which is currently not supported by the FHIR standard.

Context of Use
Use on element	Coding

Snapshot View

Extension	I		Extension	Element Id Extension Short description SNOMED CT Description ID Definition To record the SNOMED CT Description Display term actually selected Data Type Extension Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A v2:N/A
extension	I	0..0	Extension	There are no (further) constraints on this element Element Id Extension.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data Type Extension Sliced: Unordered, Open, by url(Value) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
url		1..1	System.StringFixed Value	Element Id Extension.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data Type System.String Fixed Value https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-CodingSCTDescDisplay Mappings rim:N/A
value[x]		1..1		There are no (further) constraints on this element Element Id Extension.value[x] Short description Value of extension Definition Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
valueString			string	Data Type string

Differential View

Extension	I		Extension	Element Id Extension Short description SNOMED CT Description ID Definition To record the SNOMED CT Description Display term actually selected Data Type Extension Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A v2:N/A
extension	I	0..0	Extension	There are no (further) constraints on this element Element Id Extension.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data Type Extension Sliced: Unordered, Open, by url(Value) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
url		1..1	System.StringFixed Value	Element Id Extension.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data Type System.String Fixed Value https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-CodingSCTDescDisplay Mappings rim:N/A
value[x]		1..1		There are no (further) constraints on this element Element Id Extension.value[x] Short description Value of extension Definition Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
valueString			string	Data Type string

Hybrid View

Extension	I		Extension	Element Id Extension Short description SNOMED CT Description ID Definition To record the SNOMED CT Description Display term actually selected Data Type Extension Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A v2:N/A
extension	I	0..0	Extension	There are no (further) constraints on this element Element Id Extension.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data Type Extension Sliced: Unordered, Open, by url(Value) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
url		1..1	System.StringFixed Value	Element Id Extension.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data Type System.String Fixed Value https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-CodingSCTDescDisplay Mappings rim:N/A
value[x]		1..1		There are no (further) constraints on this element Element Id Extension.value[x] Short description Value of extension Definition Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
valueString			string	Data Type string

Table View

Extension		0..1
Extension.extension		..0
Extension.url		..
Extension.value[x]	string	1..

XML View

<StructureDefinition xmlns="http://hl7.org/fhir">
    <id value="Extension-UKCore-CodingSCTDescDisplay" />
    <url value="https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-CodingSCTDescDisplay" />
    <version value="1.0.0" />
    <name value="ExtensionUKCoreCodingSCTDescDisplay" />
    <title value="Extension UK Core Coding SCT Description Display" />
    <status value="active" />
    <date value="2022-08-26" />
    <publisher value="HL7 UK" />
    <contact>
        <name value="HL7 UK" />
        <telecom>
            <system value="email" />
            <value value="secretariat@hl7.org.uk" />
            <use value="work" />
            <rank value="1" />
        </telecom>
    </contact>
    <contact>
        <name value="NHS Digital" />
        <telecom>
            <system value="email" />
            <value value="interoperabilityteam@nhs.net" />
            <use value="work" />
            <rank value="2" />
        </telecom>
    </contact>
    <description value="The description display term for a SNOMED CT concept.  The description display term associated with the ID within the sctdescid extension is important to enable the representation of the exact term that was entered by the clinician that recorded the data, or the exact term that a legacy code e.g. a Read v2 code has been translated to using an assured mapping table." />
    <purpose value="This extension extends the sctdescid extension to support the exchange of the selected description display term for a SNOMED CT concept, which is currently not supported by the FHIR standard." />
    <copyright value="Copyright &#169; 2021+ HL7 UK Licensed under the Apache License, Version 2.0 (the &quot;License&quot;); you may not use this file except in compliance with the License. You may obtain a copy of the License at  http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an &quot;AS IS&quot; BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. HL7&#174; FHIR&#174; standard Copyright &#169; 2011+ HL7 The HL7&#174; FHIR&#174; standard is used under the FHIR license. You may obtain a copy of the FHIR license at  https://www.hl7.org/fhir/license.html." />
    <fhirVersion value="4.0.1" />
    <mapping>
        <identity value="rim" />
        <uri value="http://hl7.org/v3" />
        <name value="RIM Mapping" />
    </mapping>
    <kind value="complex-type" />
    <abstract value="false" />
    <context>
        <type value="element" />
        <expression value="Coding" />
    </context>
    <type value="Extension" />
    <baseDefinition value="http://hl7.org/fhir/StructureDefinition/Extension" />
    <derivation value="constraint" />
    <differential>
        <element id="Extension">
            <path value="Extension" />
            <short value="SNOMED CT Description ID" />
            <definition value="To record the SNOMED CT Description Display term actually selected" />
            <min value="0" />
            <max value="1" />
            <mapping>
                <identity value="v2" />
                <map value="N/A" />
            </mapping>
            <mapping>
                <identity value="rim" />
                <map value="n/a" />
            </mapping>
        </element>
        <element id="Extension.extension">
            <path value="Extension.extension" />
            <max value="0" />
        </element>
        <element id="Extension.url">
            <path value="Extension.url" />
            <fixedUri value="https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-CodingSCTDescDisplay" />
        </element>
        <element id="Extension.value[x]">
            <path value="Extension.value[x]" />
            <min value="1" />
            <type>
                <code value="string" />
            </type>
        </element>
    </differential>
</StructureDefinition>

JSON View

{
    "resourceType": "StructureDefinition",
    "id": "Extension-UKCore-CodingSCTDescDisplay",
    "url": "https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-CodingSCTDescDisplay",
    "version": "1.0.0",
    "name": "ExtensionUKCoreCodingSCTDescDisplay",
    "title": "Extension UK Core Coding SCT Description Display",
    "status": "active",
    "date": "2022-08-26",
    "publisher": "HL7 UK",
    "contact":  [
        {
            "name": "HL7 UK",
            "telecom":  [
                {
                    "system": "email",
                    "value": "secretariat@hl7.org.uk",
                    "use": "work",
                    "rank": 1
                }
            ]
        },
        {
            "name": "NHS Digital",
            "telecom":  [
                {
                    "system": "email",
                    "value": "interoperabilityteam@nhs.net",
                    "use": "work",
                    "rank": 2
                }
            ]
        }
    ],
    "description": "The description display term for a SNOMED CT concept.  The description display term associated with the ID within the sctdescid extension is important to enable the representation of the exact term that was entered by the clinician that recorded the data, or the exact term that a legacy code e.g. a Read v2 code has been translated to using an assured mapping table.",
    "purpose": "This extension extends the sctdescid extension to support the exchange of the selected description display term for a SNOMED CT concept, which is currently not supported by the FHIR standard.",
    "copyright": "Copyright © 2021+ HL7 UK Licensed under the Apache License, Version 2.0 (the \"License\"); you may not use this file except in compliance with the License. You may obtain a copy of the License at  http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an \"AS IS\" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. HL7® FHIR® standard Copyright © 2011+ HL7 The HL7® FHIR® standard is used under the FHIR license. You may obtain a copy of the FHIR license at  https://www.hl7.org/fhir/license.html.",
    "fhirVersion": "4.0.1",
    "mapping":  [
        {
            "identity": "rim",
            "uri": "http://hl7.org/v3",
            "name": "RIM Mapping"
        }
    ],
    "kind": "complex-type",
    "abstract": false,
    "context":  [
        {
            "type": "element",
            "expression": "Coding"
        }
    ],
    "type": "Extension",
    "baseDefinition": "http://hl7.org/fhir/StructureDefinition/Extension",
    "derivation": "constraint",
    "differential": {
        "element":  [
            {
                "id": "Extension",
                "path": "Extension",
                "short": "SNOMED CT Description ID",
                "definition": "To record the SNOMED CT Description Display term actually selected",
                "min": 0,
                "max": "1",
                "mapping":  [
                    {
                        "identity": "v2",
                        "map": "N/A"
                    },
                    {
                        "identity": "rim",
                        "map": "n/a"
                    }
                ]
            },
            {
                "id": "Extension.extension",
                "path": "Extension.extension",
                "max": "0"
            },
            {
                "id": "Extension.url",
                "path": "Extension.url",
                "fixedUri": "https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-CodingSCTDescDisplay"
            },
            {
                "id": "Extension.value[x]",
                "path": "Extension.value[x]",
                "min": 1,
                "type":  [
                    {
                        "code": "string"
                    }
                ]
            }
        ]
    }
}

Examples

An example to illustrate the extension of adding a SNOMED CT description Id.
Example UKCore-Condition-Extension-CodingSCTDescId

Extension Additional Guidance

Guidance on its usage can be found within the CodeableConcept Guidance

StructureDefinition Extension-UKCore-ContactPreference

The preferred method of contact, contact times and written communication format given by a Patient or Related Person.

Purpose

This extension extends the Patient and RelatedPerson resources to support the exchange of their preferred method of contact, contact times and written communication format, which are currently not supported by the FHIR standard.

Context of Use
Use on element	RelatedPerson Patient

Snapshot View

Extension	I		Extension	Element Id Extension Short description The preferred method of contact, contact times and written communication format given by a Patient or Related Person. Definition The preferred method of contact, contact times and written communication format given by a Patient or Related Person. Data Type Extension Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
extension	I	0..*	Extension	Element Id Extension.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data Type Extension Sliced: Unordered, Open, by url(Value) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
PreferredContactMethod	I	0..1	Extension	Element Id Extension.extension:PreferredContactMethod Short description Preferred Contact Method Alternate names extensions, user content Definition The preferred method of contact given by a Patient or Related Person. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data Type Extension Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
url		1..1	System.StringFixed Value	Element Id Extension.extension:PreferredContactMethod.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data Type System.String Fixed Value PreferredContactMethod Mappings rim:N/A
value[x]		1..1	Binding	Element Id Extension.extension:PreferredContactMethod.value[x] Short description Preferred Contact Method Definition The preferred method of contact given by a Patient or Related Person. Binding UKCorePreferredContactMethod (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
valueCodeableConcept			CodeableConcept	Data Type CodeableConcept
PreferredContactTimes	I	0..1	Extension	Element Id Extension.extension:PreferredContactTimes Short description Preferred Contact Times Alternate names extensions, user content Definition The preferred contact times given by a Patient or Related Person. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data Type Extension Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
url		1..1	System.StringFixed Value	Element Id Extension.extension:PreferredContactTimes.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data Type System.String Fixed Value PreferredContactTimes Mappings rim:N/A
value[x]		1..1		Element Id Extension.extension:PreferredContactTimes.value[x] Short description Preferred Contact Times Definition The preferred contact time period given by a Patient or Related Person. Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
valueString			string	Data Type string
valueTiming			Timing	Data Type Timing
PreferredWrittenCommunicationFormat	I	0..1	Extension	Element Id Extension.extension:PreferredWrittenCommunicationFormat Short description Preferred Written Communication Format Alternate names extensions, user content Definition The preferred written communication format given by a Patient or Related Person. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data Type Extension Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
url		1..1	System.StringFixed Value	Element Id Extension.extension:PreferredWrittenCommunicationFormat.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data Type System.String Fixed Value PreferredWrittenCommunicationFormat Mappings rim:N/A
value[x]		1..1	Binding	Element Id Extension.extension:PreferredWrittenCommunicationFormat.value[x] Short description Preferred Written Communication Format Definition The preferred written communication format given by a Patient or Related Person. Binding UKCorePreferredWrittenCommunicationFormat (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
valueCodeableConcept			CodeableConcept	Data Type CodeableConcept
url		1..1	System.StringFixed Value	Element Id Extension.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data Type System.String Fixed Value https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-ContactPreference Mappings rim:N/A
value[x]		0..0		There are no (further) constraints on this element Element Id Extension.value[x] Short description Value of extension Definition Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A

Differential View

Extension	I		Extension	Element Id Extension Short description The preferred method of contact, contact times and written communication format given by a Patient or Related Person. Definition The preferred method of contact, contact times and written communication format given by a Patient or Related Person. Data Type Extension Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
extension	I	0..*	Extension	Element Id Extension.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data Type Extension Sliced: Unordered, Open, by url(Value) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
PreferredContactMethod	I	0..1	Extension	Element Id Extension.extension:PreferredContactMethod Short description Preferred Contact Method Alternate names extensions, user content Definition The preferred method of contact given by a Patient or Related Person. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data Type Extension Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
url		1..1	System.StringFixed Value	Element Id Extension.extension:PreferredContactMethod.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data Type System.String Fixed Value PreferredContactMethod Mappings rim:N/A
value[x]		1..1	Binding	Element Id Extension.extension:PreferredContactMethod.value[x] Short description Preferred Contact Method Definition The preferred method of contact given by a Patient or Related Person. Binding UKCorePreferredContactMethod (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
valueCodeableConcept			CodeableConcept	Data Type CodeableConcept
PreferredContactTimes	I	0..1	Extension	Element Id Extension.extension:PreferredContactTimes Short description Preferred Contact Times Alternate names extensions, user content Definition The preferred contact times given by a Patient or Related Person. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data Type Extension Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
url		1..1	System.StringFixed Value	Element Id Extension.extension:PreferredContactTimes.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data Type System.String Fixed Value PreferredContactTimes Mappings rim:N/A
value[x]		1..1		Element Id Extension.extension:PreferredContactTimes.value[x] Short description Preferred Contact Times Definition The preferred contact time period given by a Patient or Related Person. Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
valueString			string	Data Type string
valueTiming			Timing	Data Type Timing
PreferredWrittenCommunicationFormat	I	0..1	Extension	Element Id Extension.extension:PreferredWrittenCommunicationFormat Short description Preferred Written Communication Format Alternate names extensions, user content Definition The preferred written communication format given by a Patient or Related Person. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data Type Extension Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
url		1..1	System.StringFixed Value	Element Id Extension.extension:PreferredWrittenCommunicationFormat.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data Type System.String Fixed Value PreferredWrittenCommunicationFormat Mappings rim:N/A
value[x]		1..1	Binding	Element Id Extension.extension:PreferredWrittenCommunicationFormat.value[x] Short description Preferred Written Communication Format Definition The preferred written communication format given by a Patient or Related Person. Binding UKCorePreferredWrittenCommunicationFormat (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
valueCodeableConcept			CodeableConcept	Data Type CodeableConcept
url		1..1	System.StringFixed Value	Element Id Extension.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data Type System.String Fixed Value https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-ContactPreference Mappings rim:N/A
value[x]		0..0		There are no (further) constraints on this element Element Id Extension.value[x] Short description Value of extension Definition Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A

Hybrid View

Extension	I		Extension	Element Id Extension Short description The preferred method of contact, contact times and written communication format given by a Patient or Related Person. Definition The preferred method of contact, contact times and written communication format given by a Patient or Related Person. Data Type Extension Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
extension	I	0..*	Extension	Element Id Extension.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data Type Extension Sliced: Unordered, Open, by url(Value) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
PreferredContactMethod	I	0..1	Extension	Element Id Extension.extension:PreferredContactMethod Short description Preferred Contact Method Alternate names extensions, user content Definition The preferred method of contact given by a Patient or Related Person. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data Type Extension Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
url		1..1	System.StringFixed Value	Element Id Extension.extension:PreferredContactMethod.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data Type System.String Fixed Value PreferredContactMethod Mappings rim:N/A
value[x]		1..1	Binding	Element Id Extension.extension:PreferredContactMethod.value[x] Short description Preferred Contact Method Definition The preferred method of contact given by a Patient or Related Person. Binding UKCorePreferredContactMethod (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
valueCodeableConcept			CodeableConcept	Data Type CodeableConcept
PreferredContactTimes	I	0..1	Extension	Element Id Extension.extension:PreferredContactTimes Short description Preferred Contact Times Alternate names extensions, user content Definition The preferred contact times given by a Patient or Related Person. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data Type Extension Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
url		1..1	System.StringFixed Value	Element Id Extension.extension:PreferredContactTimes.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data Type System.String Fixed Value PreferredContactTimes Mappings rim:N/A
value[x]		1..1		Element Id Extension.extension:PreferredContactTimes.value[x] Short description Preferred Contact Times Definition The preferred contact time period given by a Patient or Related Person. Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
valueString			string	Data Type string
valueTiming			Timing	Data Type Timing
PreferredWrittenCommunicationFormat	I	0..1	Extension	Element Id Extension.extension:PreferredWrittenCommunicationFormat Short description Preferred Written Communication Format Alternate names extensions, user content Definition The preferred written communication format given by a Patient or Related Person. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data Type Extension Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
url		1..1	System.StringFixed Value	Element Id Extension.extension:PreferredWrittenCommunicationFormat.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data Type System.String Fixed Value PreferredWrittenCommunicationFormat Mappings rim:N/A
value[x]		1..1	Binding	Element Id Extension.extension:PreferredWrittenCommunicationFormat.value[x] Short description Preferred Written Communication Format Definition The preferred written communication format given by a Patient or Related Person. Binding UKCorePreferredWrittenCommunicationFormat (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
valueCodeableConcept			CodeableConcept	Data Type CodeableConcept
url		1..1	System.StringFixed Value	Element Id Extension.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data Type System.String Fixed Value https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-ContactPreference Mappings rim:N/A
value[x]		0..0		There are no (further) constraints on this element Element Id Extension.value[x] Short description Value of extension Definition Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A

Table View

Extension		..1
Extension.extension		0..
Extension.extension		0..1
Extension.extension.url		..
Extension.extension.value[x]	CodeableConcept	1..
Extension.extension		0..1
Extension.extension.url		..
Extension.extension.value[x]	string, Timing	1..
Extension.extension		0..1
Extension.extension.url		..
Extension.extension.value[x]	CodeableConcept	1..
Extension.url		..
Extension.value[x]		..0

XML View

<StructureDefinition xmlns="http://hl7.org/fhir">
    <id value="Extension-UKCore-ContactPreference" />
    <url value="https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-ContactPreference" />
    <version value="2.2.0" />
    <name value="ExtensionUKCoreContactPreference" />
    <title value="Extension UK Core Contact Preference" />
    <status value="active" />
    <date value="2022-01-07" />
    <publisher value="HL7 UK" />
    <contact>
        <name value="HL7 UK" />
        <telecom>
            <system value="email" />
            <value value="secretariat@hl7.org.uk" />
            <use value="work" />
            <rank value="1" />
        </telecom>
    </contact>
    <contact>
        <name value="NHS Digital" />
        <telecom>
            <system value="email" />
            <value value="interoperabilityteam@nhs.net" />
            <use value="work" />
            <rank value="2" />
        </telecom>
    </contact>
    <description value="The preferred method of contact, contact times and written communication format given by a Patient or Related Person." />
    <purpose value="This extension extends the Patient and RelatedPerson resources to support the exchange of their preferred method of contact, contact times and written communication format, which are currently not supported by the FHIR standard." />
    <copyright value="Copyright &#169; 2021+ HL7 UK Licensed under the Apache License, Version 2.0 (the &quot;License&quot;); you may not use this file except in compliance with the License. You may obtain a copy of the License at  http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an &quot;AS IS&quot; BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. HL7&#174; FHIR&#174; standard Copyright &#169; 2011+ HL7 The HL7&#174; FHIR&#174; standard is used under the FHIR license. You may obtain a copy of the FHIR license at  https://www.hl7.org/fhir/license.html." />
    <fhirVersion value="4.0.1" />
    <mapping>
        <identity value="rim" />
        <uri value="http://hl7.org/v3" />
        <name value="RIM Mapping" />
    </mapping>
    <kind value="complex-type" />
    <abstract value="false" />
    <context>
        <type value="element" />
        <expression value="Patient" />
    </context>
    <context>
        <type value="element" />
        <expression value="RelatedPerson" />
    </context>
    <type value="Extension" />
    <baseDefinition value="http://hl7.org/fhir/StructureDefinition/Extension" />
    <derivation value="constraint" />
    <differential>
        <element id="Extension">
            <path value="Extension" />
            <short value="The preferred method of contact, contact times and written communication format given by a Patient or Related Person." />
            <definition value="The preferred method of contact, contact times and written communication format given by a Patient or Related Person." />
            <max value="1" />
        </element>
        <element id="Extension.extension">
            <path value="Extension.extension" />
            <slicing>
                <discriminator>
                    <type value="value" />
                    <path value="url" />
                </discriminator>
                <rules value="open" />
            </slicing>
            <min value="0" />
        </element>
        <element id="Extension.extension:PreferredContactMethod">
            <path value="Extension.extension" />
            <sliceName value="PreferredContactMethod" />
            <short value="Preferred Contact Method" />
            <definition value="The preferred method of contact given by a Patient or Related Person." />
            <min value="0" />
            <max value="1" />
        </element>
        <element id="Extension.extension:PreferredContactMethod.url">
            <path value="Extension.extension.url" />
            <fixedUri value="PreferredContactMethod" />
        </element>
        <element id="Extension.extension:PreferredContactMethod.value[x]">
            <path value="Extension.extension.value[x]" />
            <short value="Preferred Contact Method" />
            <definition value="The preferred method of contact given by a Patient or Related Person." />
            <min value="1" />
            <type>
                <code value="CodeableConcept" />
            </type>
            <binding>
                <strength value="extensible" />
                <valueSet value="https://fhir.hl7.org.uk/ValueSet/UKCore-PreferredContactMethod" />
            </binding>
        </element>
        <element id="Extension.extension:PreferredContactTimes">
            <path value="Extension.extension" />
            <sliceName value="PreferredContactTimes" />
            <short value="Preferred Contact Times" />
            <definition value="The preferred contact times given by a Patient or Related Person." />
            <min value="0" />
            <max value="1" />
        </element>
        <element id="Extension.extension:PreferredContactTimes.url">
            <path value="Extension.extension.url" />
            <fixedUri value="PreferredContactTimes" />
        </element>
        <element id="Extension.extension:PreferredContactTimes.value[x]">
            <path value="Extension.extension.value[x]" />
            <short value="Preferred Contact Times" />
            <definition value="The preferred contact time period given by a Patient or Related Person." />
            <min value="1" />
            <type>
                <code value="string" />
            </type>
            <type>
                <code value="Timing" />
            </type>
        </element>
        <element id="Extension.extension:PreferredWrittenCommunicationFormat">
            <path value="Extension.extension" />
            <sliceName value="PreferredWrittenCommunicationFormat" />
            <short value="Preferred Written Communication Format" />
            <definition value="The preferred written communication format given by a Patient or Related Person." />
            <min value="0" />
            <max value="1" />
        </element>
        <element id="Extension.extension:PreferredWrittenCommunicationFormat.url">
            <path value="Extension.extension.url" />
            <fixedUri value="PreferredWrittenCommunicationFormat" />
        </element>
        <element id="Extension.extension:PreferredWrittenCommunicationFormat.value[x]">
            <path value="Extension.extension.value[x]" />
            <short value="Preferred Written Communication Format" />
            <definition value="The preferred written communication format given by a Patient or Related Person." />
            <min value="1" />
            <type>
                <code value="CodeableConcept" />
            </type>
            <binding>
                <strength value="extensible" />
                <valueSet value="https://fhir.hl7.org.uk/ValueSet/UKCore-PreferredWrittenCommunicationFormat" />
            </binding>
        </element>
        <element id="Extension.url">
            <path value="Extension.url" />
            <fixedUri value="https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-ContactPreference" />
        </element>
        <element id="Extension.value[x]">
            <path value="Extension.value[x]" />
            <max value="0" />
        </element>
    </differential>
</StructureDefinition>

JSON View

{
    "resourceType": "StructureDefinition",
    "id": "Extension-UKCore-ContactPreference",
    "url": "https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-ContactPreference",
    "version": "2.2.0",
    "name": "ExtensionUKCoreContactPreference",
    "title": "Extension UK Core Contact Preference",
    "status": "active",
    "date": "2022-01-07",
    "publisher": "HL7 UK",
    "contact":  [
        {
            "name": "HL7 UK",
            "telecom":  [
                {
                    "system": "email",
                    "value": "secretariat@hl7.org.uk",
                    "use": "work",
                    "rank": 1
                }
            ]
        },
        {
            "name": "NHS Digital",
            "telecom":  [
                {
                    "system": "email",
                    "value": "interoperabilityteam@nhs.net",
                    "use": "work",
                    "rank": 2
                }
            ]
        }
    ],
    "description": "The preferred method of contact, contact times and written communication format given by a Patient or Related Person.",
    "purpose": "This extension extends the Patient and RelatedPerson resources to support the exchange of their preferred method of contact, contact times and written communication format, which are currently not supported by the FHIR standard.",
    "copyright": "Copyright © 2021+ HL7 UK Licensed under the Apache License, Version 2.0 (the \"License\"); you may not use this file except in compliance with the License. You may obtain a copy of the License at  http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an \"AS IS\" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. HL7® FHIR® standard Copyright © 2011+ HL7 The HL7® FHIR® standard is used under the FHIR license. You may obtain a copy of the FHIR license at  https://www.hl7.org/fhir/license.html.",
    "fhirVersion": "4.0.1",
    "mapping":  [
        {
            "identity": "rim",
            "uri": "http://hl7.org/v3",
            "name": "RIM Mapping"
        }
    ],
    "kind": "complex-type",
    "abstract": false,
    "context":  [
        {
            "type": "element",
            "expression": "Patient"
        },
        {
            "type": "element",
            "expression": "RelatedPerson"
        }
    ],
    "type": "Extension",
    "baseDefinition": "http://hl7.org/fhir/StructureDefinition/Extension",
    "derivation": "constraint",
    "differential": {
        "element":  [
            {
                "id": "Extension",
                "path": "Extension",
                "short": "The preferred method of contact, contact times and written communication format given by a Patient or Related Person.",
                "definition": "The preferred method of contact, contact times and written communication format given by a Patient or Related Person.",
                "max": "1"
            },
            {
                "id": "Extension.extension",
                "path": "Extension.extension",
                "slicing": {
                    "discriminator":  [
                        {
                            "type": "value",
                            "path": "url"
                        }
                    ],
                    "rules": "open"
                },
                "min": 0
            },
            {
                "id": "Extension.extension:PreferredContactMethod",
                "path": "Extension.extension",
                "sliceName": "PreferredContactMethod",
                "short": "Preferred Contact Method",
                "definition": "The preferred method of contact given by a Patient or Related Person.",
                "min": 0,
                "max": "1"
            },
            {
                "id": "Extension.extension:PreferredContactMethod.url",
                "path": "Extension.extension.url",
                "fixedUri": "PreferredContactMethod"
            },
            {
                "id": "Extension.extension:PreferredContactMethod.value[x]",
                "path": "Extension.extension.value[x]",
                "short": "Preferred Contact Method",
                "definition": "The preferred method of contact given by a Patient or Related Person.",
                "min": 1,
                "type":  [
                    {
                        "code": "CodeableConcept"
                    }
                ],
                "binding": {
                    "strength": "extensible",
                    "valueSet": "https://fhir.hl7.org.uk/ValueSet/UKCore-PreferredContactMethod"
                }
            },
            {
                "id": "Extension.extension:PreferredContactTimes",
                "path": "Extension.extension",
                "sliceName": "PreferredContactTimes",
                "short": "Preferred Contact Times",
                "definition": "The preferred contact times given by a Patient or Related Person.",
                "min": 0,
                "max": "1"
            },
            {
                "id": "Extension.extension:PreferredContactTimes.url",
                "path": "Extension.extension.url",
                "fixedUri": "PreferredContactTimes"
            },
            {
                "id": "Extension.extension:PreferredContactTimes.value[x]",
                "path": "Extension.extension.value[x]",
                "short": "Preferred Contact Times",
                "definition": "The preferred contact time period given by a Patient or Related Person.",
                "min": 1,
                "type":  [
                    {
                        "code": "string"
                    },
                    {
                        "code": "Timing"
                    }
                ]
            },
            {
                "id": "Extension.extension:PreferredWrittenCommunicationFormat",
                "path": "Extension.extension",
                "sliceName": "PreferredWrittenCommunicationFormat",
                "short": "Preferred Written Communication Format",
                "definition": "The preferred written communication format given by a Patient or Related Person.",
                "min": 0,
                "max": "1"
            },
            {
                "id": "Extension.extension:PreferredWrittenCommunicationFormat.url",
                "path": "Extension.extension.url",
                "fixedUri": "PreferredWrittenCommunicationFormat"
            },
            {
                "id": "Extension.extension:PreferredWrittenCommunicationFormat.value[x]",
                "path": "Extension.extension.value[x]",
                "short": "Preferred Written Communication Format",
                "definition": "The preferred written communication format given by a Patient or Related Person.",
                "min": 1,
                "type":  [
                    {
                        "code": "CodeableConcept"
                    }
                ],
                "binding": {
                    "strength": "extensible",
                    "valueSet": "https://fhir.hl7.org.uk/ValueSet/UKCore-PreferredWrittenCommunicationFormat"
                }
            },
            {
                "id": "Extension.url",
                "path": "Extension.url",
                "fixedUri": "https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-ContactPreference"
            },
            {
                "id": "Extension.value[x]",
                "path": "Extension.value[x]",
                "max": "0"
            }
        ]
    }
}

Examples

Example UKCore-Patient-Extension-ContactPreference

StructureDefinition Extension-UKCore-ContactRank

The preferred ranking or order of contact applied to a contact on a Patient's contact list. This is independent of the ranking within the ValueSet UKCore-PersonRelationshipType.

Purpose

This extension extends the Patient resource to support the exchange of the preferred ranking or order of contact applied to a contact on a Patient's contact list, which is currently not supported by the FHIR standard.

Context of Use
Use on element	Patient.contact

Snapshot View

Extension	I		Extension	Element Id Extension Short description Preferred ranking or order of contact applied to a contact on a patient's contact list Definition The preferred ranking or order of contact applied to a contact on a patient's contact list. Data Type Extension Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
url		1..1	System.StringFixed Value	Element Id Extension.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data Type System.String Fixed Value https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-ContactRank Mappings rim:N/A
value[x]		1..1		Element Id Extension.value[x] Short description The preferred ranking or order of contact applied to a contact on a patient's contact list Definition The preferred ranking or order of contact applied to a contact on a patient's contact list. Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
valuePositiveInt			positiveInt	Data Type positiveInt

Differential View

Extension	I		Extension	Element Id Extension Short description Preferred ranking or order of contact applied to a contact on a patient's contact list Definition The preferred ranking or order of contact applied to a contact on a patient's contact list. Data Type Extension Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
url		1..1	System.StringFixed Value	Element Id Extension.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data Type System.String Fixed Value https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-ContactRank Mappings rim:N/A
value[x]		1..1		Element Id Extension.value[x] Short description The preferred ranking or order of contact applied to a contact on a patient's contact list Definition The preferred ranking or order of contact applied to a contact on a patient's contact list. Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
valuePositiveInt			positiveInt	Data Type positiveInt

Hybrid View

Extension	I		Extension	Element Id Extension Short description Preferred ranking or order of contact applied to a contact on a patient's contact list Definition The preferred ranking or order of contact applied to a contact on a patient's contact list. Data Type Extension Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
url		1..1	System.StringFixed Value	Element Id Extension.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data Type System.String Fixed Value https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-ContactRank Mappings rim:N/A
value[x]		1..1		Element Id Extension.value[x] Short description The preferred ranking or order of contact applied to a contact on a patient's contact list Definition The preferred ranking or order of contact applied to a contact on a patient's contact list. Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
valuePositiveInt			positiveInt	Data Type positiveInt

Table View

Extension		..1
Extension.url		..
Extension.value[x]	positiveInt	1..

XML View

<StructureDefinition xmlns="http://hl7.org/fhir">
    <id value="Extension-UKCore-ContactRank" />
    <url value="https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-ContactRank" />
    <version value="2.1.0" />
    <name value="ExtensionUKCoreContactRank" />
    <title value="Extension UK Core Contact Rank" />
    <status value="active" />
    <date value="2021-09-10" />
    <publisher value="HL7 UK" />
    <contact>
        <name value="HL7 UK" />
        <telecom>
            <system value="email" />
            <value value="secretariat@hl7.org.uk" />
            <use value="work" />
            <rank value="1" />
        </telecom>
    </contact>
    <contact>
        <name value="NHS Digital" />
        <telecom>
            <system value="email" />
            <value value="interoperabilityteam@nhs.net" />
            <use value="work" />
            <rank value="2" />
        </telecom>
    </contact>
    <description value="The preferred ranking or order of contact applied to a contact on a Patient&#39;s contact list." />
    <purpose value="This extension extends the Patient and RelatedPerson resources to support the exchange of the preferred ranking or order of contact applied to a contact on a Patient&#39;s contact list, which is currently not supported by the FHIR standard." />
    <copyright value="Copyright &#169; 2021+ HL7 UK Licensed under the Apache License, Version 2.0 (the &quot;License&quot;); you may not use this file except in compliance with the License. You may obtain a copy of the License at  http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an &quot;AS IS&quot; BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. HL7&#174; FHIR&#174; standard Copyright &#169; 2011+ HL7 The HL7&#174; FHIR&#174; standard is used under the FHIR license. You may obtain a copy of the FHIR license at  https://www.hl7.org/fhir/license.html." />
    <fhirVersion value="4.0.1" />
    <mapping>
        <identity value="rim" />
        <uri value="http://hl7.org/v3" />
        <name value="RIM Mapping" />
    </mapping>
    <kind value="complex-type" />
    <abstract value="false" />
    <context>
        <type value="element" />
        <expression value="Patient.contact" />
    </context>
    <context>
        <type value="element" />
        <expression value="RelatedPerson" />
    </context>
    <type value="Extension" />
    <baseDefinition value="http://hl7.org/fhir/StructureDefinition/Extension" />
    <derivation value="constraint" />
    <differential>
        <element id="Extension">
            <path value="Extension" />
            <short value="Preferred ranking or order of contact applied to a contact on a patient&#39;s contact list" />
            <definition value="The preferred ranking or order of contact applied to a contact on a patient&#39;s contact list." />
            <max value="1" />
        </element>
        <element id="Extension.url">
            <path value="Extension.url" />
            <fixedUri value="https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-ContactRank" />
        </element>
        <element id="Extension.value[x]">
            <path value="Extension.value[x]" />
            <short value="The preferred ranking or order of contact applied to a contact on a patient&#39;s contact list" />
            <definition value="The preferred ranking or order of contact applied to a contact on a patient&#39;s contact list." />
            <min value="1" />
            <type>
                <code value="positiveInt" />
            </type>
        </element>
    </differential>
</StructureDefinition>

JSON View

{
    "resourceType": "StructureDefinition",
    "id": "Extension-UKCore-ContactRank",
    "url": "https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-ContactRank",
    "version": "2.1.0",
    "name": "ExtensionUKCoreContactRank",
    "title": "Extension UK Core Contact Rank",
    "status": "active",
    "date": "2021-09-10",
    "publisher": "HL7 UK",
    "contact":  [
        {
            "name": "HL7 UK",
            "telecom":  [
                {
                    "system": "email",
                    "value": "secretariat@hl7.org.uk",
                    "use": "work",
                    "rank": 1
                }
            ]
        },
        {
            "name": "NHS Digital",
            "telecom":  [
                {
                    "system": "email",
                    "value": "interoperabilityteam@nhs.net",
                    "use": "work",
                    "rank": 2
                }
            ]
        }
    ],
    "description": "The preferred ranking or order of contact applied to a contact on a Patient's contact list.",
    "purpose": "This extension extends the Patient and RelatedPerson resources to support the exchange of the preferred ranking or order of contact applied to a contact on a Patient's contact list, which is currently not supported by the FHIR standard.",
    "copyright": "Copyright © 2021+ HL7 UK Licensed under the Apache License, Version 2.0 (the \"License\"); you may not use this file except in compliance with the License. You may obtain a copy of the License at  http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an \"AS IS\" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. HL7® FHIR® standard Copyright © 2011+ HL7 The HL7® FHIR® standard is used under the FHIR license. You may obtain a copy of the FHIR license at  https://www.hl7.org/fhir/license.html.",
    "fhirVersion": "4.0.1",
    "mapping":  [
        {
            "identity": "rim",
            "uri": "http://hl7.org/v3",
            "name": "RIM Mapping"
        }
    ],
    "kind": "complex-type",
    "abstract": false,
    "context":  [
        {
            "type": "element",
            "expression": "Patient.contact"
        },
        {
            "type": "element",
            "expression": "RelatedPerson"
        }
    ],
    "type": "Extension",
    "baseDefinition": "http://hl7.org/fhir/StructureDefinition/Extension",
    "derivation": "constraint",
    "differential": {
        "element":  [
            {
                "id": "Extension",
                "path": "Extension",
                "short": "Preferred ranking or order of contact applied to a contact on a patient's contact list",
                "definition": "The preferred ranking or order of contact applied to a contact on a patient's contact list.",
                "max": "1"
            },
            {
                "id": "Extension.url",
                "path": "Extension.url",
                "fixedUri": "https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-ContactRank"
            },
            {
                "id": "Extension.value[x]",
                "path": "Extension.value[x]",
                "short": "The preferred ranking or order of contact applied to a contact on a patient's contact list",
                "definition": "The preferred ranking or order of contact applied to a contact on a patient's contact list.",
                "min": 1,
                "type":  [
                    {
                        "code": "positiveInt"
                    }
                ]
            }
        ]
    }
}

Examples

Example UKCore-Patient-Extension-ContactRank

StructureDefinition Extension-UKCore-CopyCorrespondenceIndicator

Indicates that a Patient contact or RelatedPerson SHALL be copied in to Patient correspondence.

Purpose

This extension extends the Patient and RelatedPerson resources, to support the exchange of information to indicate that a Patient contact or RelatedPerson SHALL be copied in to Patient correspondence. This is currently not supported by the FHIR standard.

Context of Use
Use on element	RelatedPerson Patient.contact

Snapshot View

Extension	I		Extension	Element Id Extension Short description Indicator showing that a patient's contact or related person SHALL be copied in to patient correspondence Definition Extension carrying a boolean indicator showing that a patient's contact or related person SHALL be copied in to patient correspondence. Data Type Extension Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
url		1..1	System.StringFixed Value	Element Id Extension.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data Type System.String Fixed Value https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-CopyCorrespondenceIndicator Mappings rim:N/A
value[x]		1..1		Element Id Extension.value[x] Short description Copy Correspondence Indicator Definition Boolean element representing Copy Correspondence Indicator. Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
valueBoolean			boolean	Data Type boolean

Differential View

Extension	I		Extension	Element Id Extension Short description Indicator showing that a patient's contact or related person SHALL be copied in to patient correspondence Definition Extension carrying a boolean indicator showing that a patient's contact or related person SHALL be copied in to patient correspondence. Data Type Extension Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
url		1..1	System.StringFixed Value	Element Id Extension.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data Type System.String Fixed Value https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-CopyCorrespondenceIndicator Mappings rim:N/A
value[x]		1..1		Element Id Extension.value[x] Short description Copy Correspondence Indicator Definition Boolean element representing Copy Correspondence Indicator. Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
valueBoolean			boolean	Data Type boolean

Hybrid View

Extension	I		Extension	Element Id Extension Short description Indicator showing that a patient's contact or related person SHALL be copied in to patient correspondence Definition Extension carrying a boolean indicator showing that a patient's contact or related person SHALL be copied in to patient correspondence. Data Type Extension Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
url		1..1	System.StringFixed Value	Element Id Extension.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data Type System.String Fixed Value https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-CopyCorrespondenceIndicator Mappings rim:N/A
value[x]		1..1		Element Id Extension.value[x] Short description Copy Correspondence Indicator Definition Boolean element representing Copy Correspondence Indicator. Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
valueBoolean			boolean	Data Type boolean

Table View

Extension		..1
Extension.url		..
Extension.value[x]	boolean	1..

XML View

<StructureDefinition xmlns="http://hl7.org/fhir">
    <id value="Extension-UKCore-CopyCorrespondenceIndicator" />
    <url value="https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-CopyCorrespondenceIndicator" />
    <version value="2.2.0" />
    <name value="ExtensionUKCoreCopyCorrespondenceIndicator" />
    <title value="Extension UK Core Copy Correspondence Indicator" />
    <status value="active" />
    <date value="2022-08-26" />
    <publisher value="HL7 UK" />
    <contact>
        <name value="HL7 UK" />
        <telecom>
            <system value="email" />
            <value value="secretariat@hl7.org.uk" />
            <use value="work" />
            <rank value="1" />
        </telecom>
    </contact>
    <contact>
        <name value="NHS Digital" />
        <telecom>
            <system value="email" />
            <value value="interoperabilityteam@nhs.net" />
            <use value="work" />
            <rank value="2" />
        </telecom>
    </contact>
    <description value="Indicates that a Patient contact or RelatedPerson SHALL be copied in to Patient correspondence." />
    <purpose value="This extension extends the Patient and RelatedPerson resources, to support the exchange of information to indicate that a Patient contact or RelatedPerson SHALL be copied in to Patient correspondence. This is currently not supported by the FHIR standard." />
    <copyright value="Copyright &#169; 2021+ HL7 UK Licensed under the Apache License, Version 2.0 (the &quot;License&quot;); you may not use this file except in compliance with the License. You may obtain a copy of the License at  http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an &quot;AS IS&quot; BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. HL7&#174; FHIR&#174; standard Copyright &#169; 2011+ HL7 The HL7&#174; FHIR&#174; standard is used under the FHIR license. You may obtain a copy of the FHIR license at  https://www.hl7.org/fhir/license.html." />
    <fhirVersion value="4.0.1" />
    <mapping>
        <identity value="rim" />
        <uri value="http://hl7.org/v3" />
        <name value="RIM Mapping" />
    </mapping>
    <kind value="complex-type" />
    <abstract value="false" />
    <context>
        <type value="element" />
        <expression value="Patient.contact" />
    </context>
    <context>
        <type value="element" />
        <expression value="RelatedPerson" />
    </context>
    <type value="Extension" />
    <baseDefinition value="http://hl7.org/fhir/StructureDefinition/Extension" />
    <derivation value="constraint" />
    <differential>
        <element id="Extension">
            <path value="Extension" />
            <short value="Indicator showing that a patient&#39;s contact or related person SHALL be copied in to patient correspondence" />
            <definition value="Extension carrying a boolean indicator showing that a patient&#39;s contact or related person SHALL be copied in to patient correspondence." />
            <max value="1" />
        </element>
        <element id="Extension.url">
            <path value="Extension.url" />
            <fixedUri value="https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-CopyCorrespondenceIndicator" />
        </element>
        <element id="Extension.value[x]">
            <path value="Extension.value[x]" />
            <short value="Copy Correspondence Indicator" />
            <definition value="Boolean element representing Copy Correspondence Indicator." />
            <min value="1" />
            <type>
                <code value="boolean" />
            </type>
        </element>
    </differential>
</StructureDefinition>

JSON View

{
    "resourceType": "StructureDefinition",
    "id": "Extension-UKCore-CopyCorrespondenceIndicator",
    "url": "https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-CopyCorrespondenceIndicator",
    "version": "2.2.0",
    "name": "ExtensionUKCoreCopyCorrespondenceIndicator",
    "title": "Extension UK Core Copy Correspondence Indicator",
    "status": "active",
    "date": "2022-08-26",
    "publisher": "HL7 UK",
    "contact":  [
        {
            "name": "HL7 UK",
            "telecom":  [
                {
                    "system": "email",
                    "value": "secretariat@hl7.org.uk",
                    "use": "work",
                    "rank": 1
                }
            ]
        },
        {
            "name": "NHS Digital",
            "telecom":  [
                {
                    "system": "email",
                    "value": "interoperabilityteam@nhs.net",
                    "use": "work",
                    "rank": 2
                }
            ]
        }
    ],
    "description": "Indicates that a Patient contact or RelatedPerson SHALL be copied in to Patient correspondence.",
    "purpose": "This extension extends the Patient and RelatedPerson resources, to support the exchange of information to indicate that a Patient contact or RelatedPerson SHALL be copied in to Patient correspondence. This is currently not supported by the FHIR standard.",
    "copyright": "Copyright © 2021+ HL7 UK Licensed under the Apache License, Version 2.0 (the \"License\"); you may not use this file except in compliance with the License. You may obtain a copy of the License at  http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an \"AS IS\" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. HL7® FHIR® standard Copyright © 2011+ HL7 The HL7® FHIR® standard is used under the FHIR license. You may obtain a copy of the FHIR license at  https://www.hl7.org/fhir/license.html.",
    "fhirVersion": "4.0.1",
    "mapping":  [
        {
            "identity": "rim",
            "uri": "http://hl7.org/v3",
            "name": "RIM Mapping"
        }
    ],
    "kind": "complex-type",
    "abstract": false,
    "context":  [
        {
            "type": "element",
            "expression": "Patient.contact"
        },
        {
            "type": "element",
            "expression": "RelatedPerson"
        }
    ],
    "type": "Extension",
    "baseDefinition": "http://hl7.org/fhir/StructureDefinition/Extension",
    "derivation": "constraint",
    "differential": {
        "element":  [
            {
                "id": "Extension",
                "path": "Extension",
                "short": "Indicator showing that a patient's contact or related person SHALL be copied in to patient correspondence",
                "definition": "Extension carrying a boolean indicator showing that a patient's contact or related person SHALL be copied in to patient correspondence.",
                "max": "1"
            },
            {
                "id": "Extension.url",
                "path": "Extension.url",
                "fixedUri": "https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-CopyCorrespondenceIndicator"
            },
            {
                "id": "Extension.value[x]",
                "path": "Extension.value[x]",
                "short": "Copy Correspondence Indicator",
                "definition": "Boolean element representing Copy Correspondence Indicator.",
                "min": 1,
                "type":  [
                    {
                        "code": "boolean"
                    }
                ]
            }
        ]
    }
}

Examples

Example UKCore-Patient-Extension-CopyCorrespondenceIndicator

StructureDefinition Extension-UKCore-DeathNotificationStatus

The patient's death notification status.

Purpose

This extension extends the Patient resource to support the exchange of the patient's death notification status, which is currently not supported by the FHIR standard.

Context of Use
Use on element	Patient

Snapshot View

Extension	I		Extension	Element Id Extension Short description The patient's death notification status. Definition The patient's death notification status. Data Type Extension Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
extension	I	0..*	Extension	Element Id Extension.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data Type Extension Sliced: Unordered, Open, by url(Value) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
deathNotificationStatus	I	1..1	Extension	Element Id Extension.extension:deathNotificationStatus Short description The patient's death notification status. Alternate names extensions, user content Definition The patient's death notification status. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data Type Extension Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
url		1..1	System.StringFixed Value	Element Id Extension.extension:deathNotificationStatus.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data Type System.String Fixed Value deathNotificationStatus Mappings rim:N/A
value[x]		1..1	Binding	Element Id Extension.extension:deathNotificationStatus.value[x] Short description The patient's death notification status. Definition The patient's death notification status. Binding UKCoreDeathNotificationStatus (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
valueCodeableConcept			CodeableConcept	Data Type CodeableConcept
systemEffectiveDate	I	0..1	Extension	Element Id Extension.extension:systemEffectiveDate Short description System effective date for patient's death notification status. Alternate names extensions, user content Definition System effective date for patient's death notification status. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data Type Extension Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
url		1..1	System.StringFixed Value	Element Id Extension.extension:systemEffectiveDate.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data Type System.String Fixed Value systemEffectiveDate Mappings rim:N/A
value[x]		1..1		Element Id Extension.extension:systemEffectiveDate.value[x] Short description System effective date for patient's death notification status. Definition System effective date for patient's death notification status. Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
valueDateTime			dateTime	Data Type dateTime
url		1..1	System.StringFixed Value	Element Id Extension.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data Type System.String Fixed Value https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-DeathNotificationStatus Mappings rim:N/A
value[x]		0..0		There are no (further) constraints on this element Element Id Extension.value[x] Short description Value of extension Definition Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A

Differential View

Extension	I		Extension	Element Id Extension Short description The patient's death notification status. Definition The patient's death notification status. Data Type Extension Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
extension	I	0..*	Extension	Element Id Extension.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data Type Extension Sliced: Unordered, Open, by url(Value) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
deathNotificationStatus	I	1..1	Extension	Element Id Extension.extension:deathNotificationStatus Short description The patient's death notification status. Alternate names extensions, user content Definition The patient's death notification status. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data Type Extension Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
url		1..1	System.StringFixed Value	Element Id Extension.extension:deathNotificationStatus.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data Type System.String Fixed Value deathNotificationStatus Mappings rim:N/A
value[x]		1..1	Binding	Element Id Extension.extension:deathNotificationStatus.value[x] Short description The patient's death notification status. Definition The patient's death notification status. Binding UKCoreDeathNotificationStatus (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
valueCodeableConcept			CodeableConcept	Data Type CodeableConcept
systemEffectiveDate	I	0..1	Extension	Element Id Extension.extension:systemEffectiveDate Short description System effective date for patient's death notification status. Alternate names extensions, user content Definition System effective date for patient's death notification status. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data Type Extension Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
url		1..1	System.StringFixed Value	Element Id Extension.extension:systemEffectiveDate.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data Type System.String Fixed Value systemEffectiveDate Mappings rim:N/A
value[x]		1..1		Element Id Extension.extension:systemEffectiveDate.value[x] Short description System effective date for patient's death notification status. Definition System effective date for patient's death notification status. Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
valueDateTime			dateTime	Data Type dateTime
url		1..1	System.StringFixed Value	Element Id Extension.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data Type System.String Fixed Value https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-DeathNotificationStatus Mappings rim:N/A
value[x]		0..0		There are no (further) constraints on this element Element Id Extension.value[x] Short description Value of extension Definition Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A

Hybrid View

Extension	I		Extension	Element Id Extension Short description The patient's death notification status. Definition The patient's death notification status. Data Type Extension Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
extension	I	0..*	Extension	Element Id Extension.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data Type Extension Sliced: Unordered, Open, by url(Value) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
deathNotificationStatus	I	1..1	Extension	Element Id Extension.extension:deathNotificationStatus Short description The patient's death notification status. Alternate names extensions, user content Definition The patient's death notification status. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data Type Extension Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
url		1..1	System.StringFixed Value	Element Id Extension.extension:deathNotificationStatus.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data Type System.String Fixed Value deathNotificationStatus Mappings rim:N/A
value[x]		1..1	Binding	Element Id Extension.extension:deathNotificationStatus.value[x] Short description The patient's death notification status. Definition The patient's death notification status. Binding UKCoreDeathNotificationStatus (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
valueCodeableConcept			CodeableConcept	Data Type CodeableConcept
systemEffectiveDate	I	0..1	Extension	Element Id Extension.extension:systemEffectiveDate Short description System effective date for patient's death notification status. Alternate names extensions, user content Definition System effective date for patient's death notification status. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data Type Extension Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
url		1..1	System.StringFixed Value	Element Id Extension.extension:systemEffectiveDate.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data Type System.String Fixed Value systemEffectiveDate Mappings rim:N/A
value[x]		1..1		Element Id Extension.extension:systemEffectiveDate.value[x] Short description System effective date for patient's death notification status. Definition System effective date for patient's death notification status. Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
valueDateTime			dateTime	Data Type dateTime
url		1..1	System.StringFixed Value	Element Id Extension.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data Type System.String Fixed Value https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-DeathNotificationStatus Mappings rim:N/A
value[x]		0..0		There are no (further) constraints on this element Element Id Extension.value[x] Short description Value of extension Definition Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A

Table View

Extension		..1
Extension.extension		..
Extension.extension		1..1
Extension.extension.url		..
Extension.extension.value[x]	CodeableConcept	1..
Extension.extension		..1
Extension.extension.url		..
Extension.extension.value[x]	dateTime	1..
Extension.url		..
Extension.value[x]		..0

XML View

<StructureDefinition xmlns="http://hl7.org/fhir">
    <id value="Extension-UKCore-DeathNotificationStatus" />
    <url value="https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-DeathNotificationStatus" />
    <version value="2.1.0" />
    <name value="ExtensionUKCoreDeathNotificationStatus" />
    <title value="Extension UK Core Death Notification Status" />
    <status value="active" />
    <date value="2021-09-10" />
    <publisher value="HL7 UK" />
    <contact>
        <name value="HL7 UK" />
        <telecom>
            <system value="email" />
            <value value="secretariat@hl7.org.uk" />
            <use value="work" />
            <rank value="1" />
        </telecom>
    </contact>
    <contact>
        <name value="NHS Digital" />
        <telecom>
            <system value="email" />
            <value value="interoperabilityteam@nhs.net" />
            <use value="work" />
            <rank value="2" />
        </telecom>
    </contact>
    <description value="The patient&#39;s death notification status." />
    <purpose value="This extension extends the Patient resource to support the exchange of the patient&#39;s death notification status, which is currently not supported by the FHIR standard." />
    <copyright value="Copyright &#169; 2021+ HL7 UK Licensed under the Apache License, Version 2.0 (the &quot;License&quot;); you may not use this file except in compliance with the License. You may obtain a copy of the License at  http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an &quot;AS IS&quot; BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. HL7&#174; FHIR&#174; standard Copyright &#169; 2011+ HL7 The HL7&#174; FHIR&#174; standard is used under the FHIR license. You may obtain a copy of the FHIR license at  https://www.hl7.org/fhir/license.html." />
    <fhirVersion value="4.0.1" />
    <mapping>
        <identity value="rim" />
        <uri value="http://hl7.org/v3" />
        <name value="RIM Mapping" />
    </mapping>
    <kind value="complex-type" />
    <abstract value="false" />
    <context>
        <type value="element" />
        <expression value="Patient" />
    </context>
    <type value="Extension" />
    <baseDefinition value="http://hl7.org/fhir/StructureDefinition/Extension" />
    <derivation value="constraint" />
    <differential>
        <element id="Extension">
            <path value="Extension" />
            <short value="The patient&#39;s death notification status." />
            <definition value="The patient&#39;s death notification status." />
            <max value="1" />
        </element>
        <element id="Extension.extension">
            <path value="Extension.extension" />
            <slicing>
                <discriminator>
                    <type value="value" />
                    <path value="url" />
                </discriminator>
                <rules value="open" />
            </slicing>
        </element>
        <element id="Extension.extension:deathNotificationStatus">
            <path value="Extension.extension" />
            <sliceName value="deathNotificationStatus" />
            <short value="The patient&#39;s death notification status." />
            <definition value="The patient&#39;s death notification status." />
            <min value="1" />
            <max value="1" />
        </element>
        <element id="Extension.extension:deathNotificationStatus.url">
            <path value="Extension.extension.url" />
            <fixedUri value="deathNotificationStatus" />
        </element>
        <element id="Extension.extension:deathNotificationStatus.value[x]">
            <path value="Extension.extension.value[x]" />
            <short value="The patient&#39;s death notification status." />
            <definition value="The patient&#39;s death notification status." />
            <min value="1" />
            <type>
                <code value="CodeableConcept" />
            </type>
            <binding>
                <strength value="extensible" />
                <valueSet value="https://fhir.hl7.org.uk/ValueSet/UKCore-DeathNotificationStatus" />
            </binding>
        </element>
        <element id="Extension.extension:systemEffectiveDate">
            <path value="Extension.extension" />
            <sliceName value="systemEffectiveDate" />
            <short value="System effective date for patient&#39;s death notification status." />
            <definition value="System effective date for patient&#39;s death notification status." />
            <max value="1" />
        </element>
        <element id="Extension.extension:systemEffectiveDate.url">
            <path value="Extension.extension.url" />
            <fixedUri value="systemEffectiveDate" />
        </element>
        <element id="Extension.extension:systemEffectiveDate.value[x]">
            <path value="Extension.extension.value[x]" />
            <short value="System effective date for patient&#39;s death notification status." />
            <definition value="System effective date for patient&#39;s death notification status." />
            <min value="1" />
            <type>
                <code value="dateTime" />
            </type>
        </element>
        <element id="Extension.url">
            <path value="Extension.url" />
            <fixedUri value="https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-DeathNotificationStatus" />
        </element>
        <element id="Extension.value[x]">
            <path value="Extension.value[x]" />
            <max value="0" />
        </element>
    </differential>
</StructureDefinition>

JSON View

{
    "resourceType": "StructureDefinition",
    "id": "Extension-UKCore-DeathNotificationStatus",
    "url": "https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-DeathNotificationStatus",
    "version": "2.1.0",
    "name": "ExtensionUKCoreDeathNotificationStatus",
    "title": "Extension UK Core Death Notification Status",
    "status": "active",
    "date": "2021-09-10",
    "publisher": "HL7 UK",
    "contact":  [
        {
            "name": "HL7 UK",
            "telecom":  [
                {
                    "system": "email",
                    "value": "secretariat@hl7.org.uk",
                    "use": "work",
                    "rank": 1
                }
            ]
        },
        {
            "name": "NHS Digital",
            "telecom":  [
                {
                    "system": "email",
                    "value": "interoperabilityteam@nhs.net",
                    "use": "work",
                    "rank": 2
                }
            ]
        }
    ],
    "description": "The patient's death notification status.",
    "purpose": "This extension extends the Patient resource to support the exchange of the patient's death notification status, which is currently not supported by the FHIR standard.",
    "copyright": "Copyright © 2021+ HL7 UK Licensed under the Apache License, Version 2.0 (the \"License\"); you may not use this file except in compliance with the License. You may obtain a copy of the License at  http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an \"AS IS\" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. HL7® FHIR® standard Copyright © 2011+ HL7 The HL7® FHIR® standard is used under the FHIR license. You may obtain a copy of the FHIR license at  https://www.hl7.org/fhir/license.html.",
    "fhirVersion": "4.0.1",
    "mapping":  [
        {
            "identity": "rim",
            "uri": "http://hl7.org/v3",
            "name": "RIM Mapping"
        }
    ],
    "kind": "complex-type",
    "abstract": false,
    "context":  [
        {
            "type": "element",
            "expression": "Patient"
        }
    ],
    "type": "Extension",
    "baseDefinition": "http://hl7.org/fhir/StructureDefinition/Extension",
    "derivation": "constraint",
    "differential": {
        "element":  [
            {
                "id": "Extension",
                "path": "Extension",
                "short": "The patient's death notification status.",
                "definition": "The patient's death notification status.",
                "max": "1"
            },
            {
                "id": "Extension.extension",
                "path": "Extension.extension",
                "slicing": {
                    "discriminator":  [
                        {
                            "type": "value",
                            "path": "url"
                        }
                    ],
                    "rules": "open"
                }
            },
            {
                "id": "Extension.extension:deathNotificationStatus",
                "path": "Extension.extension",
                "sliceName": "deathNotificationStatus",
                "short": "The patient's death notification status.",
                "definition": "The patient's death notification status.",
                "min": 1,
                "max": "1"
            },
            {
                "id": "Extension.extension:deathNotificationStatus.url",
                "path": "Extension.extension.url",
                "fixedUri": "deathNotificationStatus"
            },
            {
                "id": "Extension.extension:deathNotificationStatus.value[x]",
                "path": "Extension.extension.value[x]",
                "short": "The patient's death notification status.",
                "definition": "The patient's death notification status.",
                "min": 1,
                "type":  [
                    {
                        "code": "CodeableConcept"
                    }
                ],
                "binding": {
                    "strength": "extensible",
                    "valueSet": "https://fhir.hl7.org.uk/ValueSet/UKCore-DeathNotificationStatus"
                }
            },
            {
                "id": "Extension.extension:systemEffectiveDate",
                "path": "Extension.extension",
                "sliceName": "systemEffectiveDate",
                "short": "System effective date for patient's death notification status.",
                "definition": "System effective date for patient's death notification status.",
                "max": "1"
            },
            {
                "id": "Extension.extension:systemEffectiveDate.url",
                "path": "Extension.extension.url",
                "fixedUri": "systemEffectiveDate"
            },
            {
                "id": "Extension.extension:systemEffectiveDate.value[x]",
                "path": "Extension.extension.value[x]",
                "short": "System effective date for patient's death notification status.",
                "definition": "System effective date for patient's death notification status.",
                "min": 1,
                "type":  [
                    {
                        "code": "dateTime"
                    }
                ]
            },
            {
                "id": "Extension.url",
                "path": "Extension.url",
                "fixedUri": "https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-DeathNotificationStatus"
            },
            {
                "id": "Extension.value[x]",
                "path": "Extension.value[x]",
                "max": "0"
            }
        ]
    }
}

Examples

Example UKCore-Patient-Extension-DeathNotificationStatus

StructureDefinition Extension-UKCore-EthnicCategory

Information that describes the patient's ethnic category.

Purpose

This extension extends the Patient resource to support the exchange of ethnic category information, as a Codeable Concept, which is currently not supported by the FHIR standard.

Context of Use
Use on element	Patient

Snapshot View

Extension	I		Extension	Element Id Extension Short description Ethnic category Definition The ethnicity of the subject. Data Type Extension Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
url		1..1	System.StringFixed Value	Element Id Extension.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data Type System.String Fixed Value https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-EthnicCategory Mappings rim:N/A
value[x]		1..1	Binding	Element Id Extension.value[x] Short description A code classifying the person's ethnicity Definition A code classifying the person's ethnicity. Binding A set of codes that define the ethnicity of a person, as specified by the person. UKCoreEthnicCategory (preferred) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
valueCodeableConcept			CodeableConcept	Data Type CodeableConcept

Differential View

Extension	I		Extension	Element Id Extension Short description Ethnic category Definition The ethnicity of the subject. Data Type Extension Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
url		1..1	System.StringFixed Value	Element Id Extension.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data Type System.String Fixed Value https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-EthnicCategory Mappings rim:N/A
value[x]		1..1	Binding	Element Id Extension.value[x] Short description A code classifying the person's ethnicity Definition A code classifying the person's ethnicity. Binding A set of codes that define the ethnicity of a person, as specified by the person. UKCoreEthnicCategory (preferred) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
valueCodeableConcept			CodeableConcept	Data Type CodeableConcept

Hybrid View

Extension	I		Extension	Element Id Extension Short description Ethnic category Definition The ethnicity of the subject. Data Type Extension Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
url		1..1	System.StringFixed Value	Element Id Extension.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data Type System.String Fixed Value https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-EthnicCategory Mappings rim:N/A
value[x]		1..1	Binding	Element Id Extension.value[x] Short description A code classifying the person's ethnicity Definition A code classifying the person's ethnicity. Binding A set of codes that define the ethnicity of a person, as specified by the person. UKCoreEthnicCategory (preferred) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
valueCodeableConcept			CodeableConcept	Data Type CodeableConcept

Table View

Extension		..
Extension.url		..
Extension.value[x]	CodeableConcept	1..

XML View

<StructureDefinition xmlns="http://hl7.org/fhir">
    <id value="Extension-UKCore-EthnicCategory" />
    <url value="https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-EthnicCategory" />
    <version value="2.2.0" />
    <name value="ExtensionUKCoreEthnicCategory" />
    <title value="Extension UK Core Ethnic Category" />
    <status value="active" />
    <date value="2022-01-07" />
    <publisher value="HL7 UK" />
    <contact>
        <name value="HL7 UK" />
        <telecom>
            <system value="email" />
            <value value="secretariat@hl7.org.uk" />
            <use value="work" />
            <rank value="1" />
        </telecom>
    </contact>
    <contact>
        <name value="NHS Digital" />
        <telecom>
            <system value="email" />
            <value value="interoperabilityteam@nhs.net" />
            <use value="work" />
            <rank value="2" />
        </telecom>
    </contact>
    <description value="Information that describes the patient&#39;s ethnic category." />
    <purpose value="This extension extends the Patient resource to support the exchange of ethnic category information, as a Codeable Concept, which is currently not supported by the FHIR standard." />
    <copyright value="Copyright &#169; 2021+ HL7 UK Licensed under the Apache License, Version 2.0 (the &quot;License&quot;); you may not use this file except in compliance with the License. You may obtain a copy of the License at  http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an &quot;AS IS&quot; BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. HL7&#174; FHIR&#174; standard Copyright &#169; 2011+ HL7 The HL7&#174; FHIR&#174; standard is used under the FHIR license. You may obtain a copy of the FHIR license at  https://www.hl7.org/fhir/license.html." />
    <fhirVersion value="4.0.1" />
    <mapping>
        <identity value="rim" />
        <uri value="http://hl7.org/v3" />
        <name value="RIM Mapping" />
    </mapping>
    <kind value="complex-type" />
    <abstract value="false" />
    <context>
        <type value="element" />
        <expression value="Patient" />
    </context>
    <type value="Extension" />
    <baseDefinition value="http://hl7.org/fhir/StructureDefinition/Extension" />
    <derivation value="constraint" />
    <differential>
        <element id="Extension">
            <path value="Extension" />
            <short value="Ethnic category" />
            <definition value="The ethnicity of the subject." />
        </element>
        <element id="Extension.url">
            <path value="Extension.url" />
            <fixedUri value="https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-EthnicCategory" />
        </element>
        <element id="Extension.value[x]">
            <path value="Extension.value[x]" />
            <short value="A code classifying the person&#39;s ethnicity" />
            <definition value="A code classifying the person&#39;s ethnicity." />
            <min value="1" />
            <type>
                <code value="CodeableConcept" />
            </type>
            <binding>
                <strength value="preferred" />
                <description value="A set of codes that define the ethnicity of a person, as specified by the person." />
                <valueSet value="https://fhir.hl7.org.uk/ValueSet/UKCore-EthnicCategory" />
            </binding>
        </element>
    </differential>
</StructureDefinition>

JSON View

{
    "resourceType": "StructureDefinition",
    "id": "Extension-UKCore-EthnicCategory",
    "url": "https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-EthnicCategory",
    "version": "2.2.0",
    "name": "ExtensionUKCoreEthnicCategory",
    "title": "Extension UK Core Ethnic Category",
    "status": "active",
    "date": "2022-01-07",
    "publisher": "HL7 UK",
    "contact":  [
        {
            "name": "HL7 UK",
            "telecom":  [
                {
                    "system": "email",
                    "value": "secretariat@hl7.org.uk",
                    "use": "work",
                    "rank": 1
                }
            ]
        },
        {
            "name": "NHS Digital",
            "telecom":  [
                {
                    "system": "email",
                    "value": "interoperabilityteam@nhs.net",
                    "use": "work",
                    "rank": 2
                }
            ]
        }
    ],
    "description": "Information that describes the patient's ethnic category.",
    "purpose": "This extension extends the Patient resource to support the exchange of ethnic category information, as a Codeable Concept, which is currently not supported by the FHIR standard.",
    "copyright": "Copyright © 2021+ HL7 UK Licensed under the Apache License, Version 2.0 (the \"License\"); you may not use this file except in compliance with the License. You may obtain a copy of the License at  http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an \"AS IS\" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. HL7® FHIR® standard Copyright © 2011+ HL7 The HL7® FHIR® standard is used under the FHIR license. You may obtain a copy of the FHIR license at  https://www.hl7.org/fhir/license.html.",
    "fhirVersion": "4.0.1",
    "mapping":  [
        {
            "identity": "rim",
            "uri": "http://hl7.org/v3",
            "name": "RIM Mapping"
        }
    ],
    "kind": "complex-type",
    "abstract": false,
    "context":  [
        {
            "type": "element",
            "expression": "Patient"
        }
    ],
    "type": "Extension",
    "baseDefinition": "http://hl7.org/fhir/StructureDefinition/Extension",
    "derivation": "constraint",
    "differential": {
        "element":  [
            {
                "id": "Extension",
                "path": "Extension",
                "short": "Ethnic category",
                "definition": "The ethnicity of the subject."
            },
            {
                "id": "Extension.url",
                "path": "Extension.url",
                "fixedUri": "https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-EthnicCategory"
            },
            {
                "id": "Extension.value[x]",
                "path": "Extension.value[x]",
                "short": "A code classifying the person's ethnicity",
                "definition": "A code classifying the person's ethnicity.",
                "min": 1,
                "type":  [
                    {
                        "code": "CodeableConcept"
                    }
                ],
                "binding": {
                    "strength": "preferred",
                    "description": "A set of codes that define the ethnicity of a person, as specified by the person.",
                    "valueSet": "https://fhir.hl7.org.uk/ValueSet/UKCore-EthnicCategory"
                }
            }
        ]
    }
}

Examples

Richard Smith - An example to illustrate patient Ethnic Category information.
Example UKCore-Patient-Extension-EthnicCategory

StructureDefinition Extension-UKCore-Evidence

A reference to results of investigations that confirmed the certainty of the diagnosis. Examples might include results of skin prick allergy tests.

Purpose

This extension extends the AllergyIntolerance resource to support the exchange of information describing the reference to results of investigations that confirmed the certainty of the diagnosis, which is currently not supported by the FHIR standard.

Guidance

An optional extension for a reference to a UKCore-DiagnosticReport resource to share the results of investigations that confirmed the certainty of the allergy or intolerance diagnosis.

Context of Use
Use on element	AllergyIntolerance

Snapshot View

Extension	I		Extension	Element Id Extension Short description A reference to results of investigations that confirmed the certainty of the diagnosis Definition A reference to results of investigations that confirmed the certainty of the diagnosis. Data Type Extension Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
url		1..1	System.StringFixed Value	Element Id Extension.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data Type System.String Fixed Value https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-Evidence Mappings rim:N/A
value[x]		1..1		Element Id Extension.value[x] Short description A reference to results of investigations that confirmed the certainty of the diagnosis Definition A reference to results of investigations that confirmed the certainty of the diagnosis. Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
reference	Σ I	0..1	string	There are no (further) constraints on this element Element Id Extension.value[x].reference Short description Literal reference, Relative, internal or absolute URL Definition A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources. Comments Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
type	Σ	0..1	uriBinding	There are no (further) constraints on this element Element Id Extension.value[x].type Short description Type the reference refers to (e.g. "Patient") Definition The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent. The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources). Comments This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified. Data Type uri Binding Aa resource (or, for logical models, the URI of the logical model). ResourceType (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
identifier	Σ	0..1	Identifier	There are no (further) constraints on this element Element Id Extension.value[x].identifier Short description Logical reference, when literal reference is not known Definition An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference. Comments When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it. Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation\|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any). Data Type Identifier Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CX / EI (occasionally, more often EI maps to a resource id or a URL) rim:II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd:Identifier rim:.identifier
use	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element Id Extension.value[x].identifier.use Short description usual \| official \| temp \| secondary \| old (If known) Definition The purpose of this identifier. Requirements Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. Comments Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. Data Type code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:N/A rim:Role.code or implied by context
type	Σ	0..1	CodeableConceptBinding	There are no (further) constraints on this element Element Id Extension.value[x].identifier.type Short description Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. Requirements Allows users to make use of identifiers when the identifier system is not known. Comments This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. Data Type CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE rim:CD orim:fhir:CodeableConcept rdfs:subClassOf dt:CD v2:CX.5 rim:Role.code or implied by context
system	Σ	0..1	uri	There are no (further) constraints on this element Element Id Extension.value[x].identifier.system Short description The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique. Requirements There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. Comments Identifier.system is always case sensitive. Data Type uri Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General http://www.acme.com/identifiers/patient Mappings rim:n/a v2:CX.4 / EI-2-4 rim:II.root or Role.id.root servd:./IdentifierType
value	Σ	0..1	string	There are no (further) constraints on this element Element Id Extension.value[x].identifier.value Short description The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system. Comments If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General 123456 Mappings rim:n/a v2:CX.1 / EI.1 rim:II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd:./Value
period	Σ I	0..1	Period	There are no (further) constraints on this element Element Id Extension.value[x].identifier.period Short description Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use. Comments A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration. Data Type Period Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` per-1:If present, start SHALL have a lower value than end `start.hasValue().not() or end.hasValue().not() or (start <= end)` Mappings rim:n/a v2:DR rim:IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"] v2:CX.7 + CX.8 rim:Role.effectiveTime or implied by context servd:./StartDate and ./EndDate
assigner	Σ I	0..1	Reference(UK Core Organization)	Element Id Extension.value[x].identifier.assigner Short description Organization that issued id (may be just text) Definition Organization that issued/manages the identifier. Comments The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. Data Type Reference(UK Core Organization) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1:SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim:n/a rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2:CX.4 / (CX.4,CX.9,CX.10) rim:II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd:./IdentifierIssuingAuthority
display	Σ	0..1	string	There are no (further) constraints on this element Element Id Extension.value[x].display Short description Text alternative for the resource Definition Plain text narrative that identifies the resource in addition to the resource reference. Comments This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
valueReference			Reference(UK Core DiagnosticReport)	Data Type Reference(UK Core DiagnosticReport)

Differential View

Extension	I		Extension	Element Id Extension Short description A reference to results of investigations that confirmed the certainty of the diagnosis Definition A reference to results of investigations that confirmed the certainty of the diagnosis. Data Type Extension Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
url		1..1	System.StringFixed Value	Element Id Extension.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data Type System.String Fixed Value https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-Evidence Mappings rim:N/A
value[x]		1..1		Element Id Extension.value[x] Short description A reference to results of investigations that confirmed the certainty of the diagnosis Definition A reference to results of investigations that confirmed the certainty of the diagnosis. Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
reference	Σ I	0..1	string	There are no (further) constraints on this element Element Id Extension.value[x].reference Short description Literal reference, Relative, internal or absolute URL Definition A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources. Comments Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
type	Σ	0..1	uriBinding	There are no (further) constraints on this element Element Id Extension.value[x].type Short description Type the reference refers to (e.g. "Patient") Definition The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent. The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources). Comments This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified. Data Type uri Binding Aa resource (or, for logical models, the URI of the logical model). ResourceType (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
identifier	Σ	0..1	Identifier	There are no (further) constraints on this element Element Id Extension.value[x].identifier Short description Logical reference, when literal reference is not known Definition An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference. Comments When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it. Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation\|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any). Data Type Identifier Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CX / EI (occasionally, more often EI maps to a resource id or a URL) rim:II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd:Identifier rim:.identifier
use	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element Id Extension.value[x].identifier.use Short description usual \| official \| temp \| secondary \| old (If known) Definition The purpose of this identifier. Requirements Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. Comments Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. Data Type code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:N/A rim:Role.code or implied by context
type	Σ	0..1	CodeableConceptBinding	There are no (further) constraints on this element Element Id Extension.value[x].identifier.type Short description Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. Requirements Allows users to make use of identifiers when the identifier system is not known. Comments This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. Data Type CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE rim:CD orim:fhir:CodeableConcept rdfs:subClassOf dt:CD v2:CX.5 rim:Role.code or implied by context
system	Σ	0..1	uri	There are no (further) constraints on this element Element Id Extension.value[x].identifier.system Short description The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique. Requirements There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. Comments Identifier.system is always case sensitive. Data Type uri Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General http://www.acme.com/identifiers/patient Mappings rim:n/a v2:CX.4 / EI-2-4 rim:II.root or Role.id.root servd:./IdentifierType
value	Σ	0..1	string	There are no (further) constraints on this element Element Id Extension.value[x].identifier.value Short description The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system. Comments If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General 123456 Mappings rim:n/a v2:CX.1 / EI.1 rim:II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd:./Value
period	Σ I	0..1	Period	There are no (further) constraints on this element Element Id Extension.value[x].identifier.period Short description Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use. Comments A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration. Data Type Period Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` per-1:If present, start SHALL have a lower value than end `start.hasValue().not() or end.hasValue().not() or (start <= end)` Mappings rim:n/a v2:DR rim:IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"] v2:CX.7 + CX.8 rim:Role.effectiveTime or implied by context servd:./StartDate and ./EndDate
assigner	Σ I	0..1	Reference(UK Core Organization)	Element Id Extension.value[x].identifier.assigner Short description Organization that issued id (may be just text) Definition Organization that issued/manages the identifier. Comments The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. Data Type Reference(UK Core Organization) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1:SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim:n/a rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2:CX.4 / (CX.4,CX.9,CX.10) rim:II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd:./IdentifierIssuingAuthority
display	Σ	0..1	string	There are no (further) constraints on this element Element Id Extension.value[x].display Short description Text alternative for the resource Definition Plain text narrative that identifies the resource in addition to the resource reference. Comments This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
valueReference			Reference(UK Core DiagnosticReport)	Data Type Reference(UK Core DiagnosticReport)

Hybrid View

Extension	I		Extension	Element Id Extension Short description A reference to results of investigations that confirmed the certainty of the diagnosis Definition A reference to results of investigations that confirmed the certainty of the diagnosis. Data Type Extension Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
url		1..1	System.StringFixed Value	Element Id Extension.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data Type System.String Fixed Value https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-Evidence Mappings rim:N/A
value[x]		1..1		Element Id Extension.value[x] Short description A reference to results of investigations that confirmed the certainty of the diagnosis Definition A reference to results of investigations that confirmed the certainty of the diagnosis. Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
reference	Σ I	0..1	string	There are no (further) constraints on this element Element Id Extension.value[x].reference Short description Literal reference, Relative, internal or absolute URL Definition A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources. Comments Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
type	Σ	0..1	uriBinding	There are no (further) constraints on this element Element Id Extension.value[x].type Short description Type the reference refers to (e.g. "Patient") Definition The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent. The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources). Comments This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified. Data Type uri Binding Aa resource (or, for logical models, the URI of the logical model). ResourceType (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
identifier	Σ	0..1	Identifier	There are no (further) constraints on this element Element Id Extension.value[x].identifier Short description Logical reference, when literal reference is not known Definition An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference. Comments When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it. Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation\|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any). Data Type Identifier Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CX / EI (occasionally, more often EI maps to a resource id or a URL) rim:II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd:Identifier rim:.identifier
use	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element Id Extension.value[x].identifier.use Short description usual \| official \| temp \| secondary \| old (If known) Definition The purpose of this identifier. Requirements Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. Comments Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. Data Type code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:N/A rim:Role.code or implied by context
type	Σ	0..1	CodeableConceptBinding	There are no (further) constraints on this element Element Id Extension.value[x].identifier.type Short description Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. Requirements Allows users to make use of identifiers when the identifier system is not known. Comments This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. Data Type CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE rim:CD orim:fhir:CodeableConcept rdfs:subClassOf dt:CD v2:CX.5 rim:Role.code or implied by context
system	Σ	0..1	uri	There are no (further) constraints on this element Element Id Extension.value[x].identifier.system Short description The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique. Requirements There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. Comments Identifier.system is always case sensitive. Data Type uri Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General http://www.acme.com/identifiers/patient Mappings rim:n/a v2:CX.4 / EI-2-4 rim:II.root or Role.id.root servd:./IdentifierType
value	Σ	0..1	string	There are no (further) constraints on this element Element Id Extension.value[x].identifier.value Short description The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system. Comments If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General 123456 Mappings rim:n/a v2:CX.1 / EI.1 rim:II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd:./Value
period	Σ I	0..1	Period	There are no (further) constraints on this element Element Id Extension.value[x].identifier.period Short description Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use. Comments A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration. Data Type Period Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` per-1:If present, start SHALL have a lower value than end `start.hasValue().not() or end.hasValue().not() or (start <= end)` Mappings rim:n/a v2:DR rim:IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"] v2:CX.7 + CX.8 rim:Role.effectiveTime or implied by context servd:./StartDate and ./EndDate
assigner	Σ I	0..1	Reference(UK Core Organization)	Element Id Extension.value[x].identifier.assigner Short description Organization that issued id (may be just text) Definition Organization that issued/manages the identifier. Comments The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. Data Type Reference(UK Core Organization) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1:SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim:n/a rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2:CX.4 / (CX.4,CX.9,CX.10) rim:II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd:./IdentifierIssuingAuthority
display	Σ	0..1	string	There are no (further) constraints on this element Element Id Extension.value[x].display Short description Text alternative for the resource Definition Plain text narrative that identifies the resource in addition to the resource reference. Comments This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
valueReference			Reference(UK Core DiagnosticReport)	Data Type Reference(UK Core DiagnosticReport)

Table View

Extension		..
Extension.url		..
Extension.value[x]	Reference(UK Core DiagnosticReport)	1..
Extension.value[x].identifier		..
Extension.value[x].identifier.assigner	Reference(UK Core Organization)	..

XML View

<StructureDefinition xmlns="http://hl7.org/fhir">
    <id value="Extension-UKCore-Evidence" />
    <url value="https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-Evidence" />
    <version value="2.1.0" />
    <name value="ExtensionUKCoreEvidence" />
    <title value="Extension UK Core Evidence" />
    <status value="active" />
    <date value="2021-09-10" />
    <publisher value="HL7 UK" />
    <contact>
        <name value="HL7 UK" />
        <telecom>
            <system value="email" />
            <value value="secretariat@hl7.org.uk" />
            <use value="work" />
            <rank value="1" />
        </telecom>
    </contact>
    <contact>
        <name value="NHS Digital" />
        <telecom>
            <system value="email" />
            <value value="interoperabilityteam@nhs.net" />
            <use value="work" />
            <rank value="2" />
        </telecom>
    </contact>
    <description value="A reference to results of investigations that confirmed the certainty of the diagnosis.  Examples might include results of skin prick allergy tests." />
    <purpose value="This extension extends the AllergyIntolerance resource to support the exchange of information describing the reference to results of investigations that confirmed the certainty of the diagnosis, which is currently not supported by the FHIR standard." />
    <copyright value="Copyright &#169; 2021+ HL7 UK Licensed under the Apache License, Version 2.0 (the &quot;License&quot;); you may not use this file except in compliance with the License. You may obtain a copy of the License at  http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an &quot;AS IS&quot; BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. HL7&#174; FHIR&#174; standard Copyright &#169; 2011+ HL7 The HL7&#174; FHIR&#174; standard is used under the FHIR license. You may obtain a copy of the FHIR license at  https://www.hl7.org/fhir/license.html." />
    <fhirVersion value="4.0.1" />
    <mapping>
        <identity value="rim" />
        <uri value="http://hl7.org/v3" />
        <name value="RIM Mapping" />
    </mapping>
    <kind value="complex-type" />
    <abstract value="false" />
    <context>
        <type value="element" />
        <expression value="AllergyIntolerance" />
    </context>
    <type value="Extension" />
    <baseDefinition value="http://hl7.org/fhir/StructureDefinition/Extension" />
    <derivation value="constraint" />
    <differential>
        <element id="Extension">
            <path value="Extension" />
            <short value="A reference to results of investigations that confirmed the certainty of the diagnosis" />
            <definition value="A reference to results of investigations that confirmed the certainty of the diagnosis." />
        </element>
        <element id="Extension.url">
            <path value="Extension.url" />
            <fixedUri value="https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-Evidence" />
        </element>
        <element id="Extension.value[x]">
            <path value="Extension.value[x]" />
            <short value="A reference to results of investigations that confirmed the certainty of the diagnosis" />
            <definition value="A reference to results of investigations that confirmed the certainty of the diagnosis." />
            <min value="1" />
            <type>
                <code value="Reference" />
                <targetProfile value="https://fhir.hl7.org.uk/StructureDefinition/UKCore-DiagnosticReport" />
            </type>
        </element>
        <element id="Extension.value[x].identifier.assigner">
            <path value="Extension.value[x].identifier.assigner" />
            <type>
                <code value="Reference" />
                <targetProfile value="https://fhir.hl7.org.uk/StructureDefinition/UKCore-Organization" />
            </type>
        </element>
    </differential>
</StructureDefinition>

JSON View

{
    "resourceType": "StructureDefinition",
    "id": "Extension-UKCore-Evidence",
    "url": "https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-Evidence",
    "version": "2.1.0",
    "name": "ExtensionUKCoreEvidence",
    "title": "Extension UK Core Evidence",
    "status": "active",
    "date": "2021-09-10",
    "publisher": "HL7 UK",
    "contact":  [
        {
            "name": "HL7 UK",
            "telecom":  [
                {
                    "system": "email",
                    "value": "secretariat@hl7.org.uk",
                    "use": "work",
                    "rank": 1
                }
            ]
        },
        {
            "name": "NHS Digital",
            "telecom":  [
                {
                    "system": "email",
                    "value": "interoperabilityteam@nhs.net",
                    "use": "work",
                    "rank": 2
                }
            ]
        }
    ],
    "description": "A reference to results of investigations that confirmed the certainty of the diagnosis.  Examples might include results of skin prick allergy tests.",
    "purpose": "This extension extends the AllergyIntolerance resource to support the exchange of information describing the reference to results of investigations that confirmed the certainty of the diagnosis, which is currently not supported by the FHIR standard.",
    "copyright": "Copyright © 2021+ HL7 UK Licensed under the Apache License, Version 2.0 (the \"License\"); you may not use this file except in compliance with the License. You may obtain a copy of the License at  http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an \"AS IS\" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. HL7® FHIR® standard Copyright © 2011+ HL7 The HL7® FHIR® standard is used under the FHIR license. You may obtain a copy of the FHIR license at  https://www.hl7.org/fhir/license.html.",
    "fhirVersion": "4.0.1",
    "mapping":  [
        {
            "identity": "rim",
            "uri": "http://hl7.org/v3",
            "name": "RIM Mapping"
        }
    ],
    "kind": "complex-type",
    "abstract": false,
    "context":  [
        {
            "type": "element",
            "expression": "AllergyIntolerance"
        }
    ],
    "type": "Extension",
    "baseDefinition": "http://hl7.org/fhir/StructureDefinition/Extension",
    "derivation": "constraint",
    "differential": {
        "element":  [
            {
                "id": "Extension",
                "path": "Extension",
                "short": "A reference to results of investigations that confirmed the certainty of the diagnosis",
                "definition": "A reference to results of investigations that confirmed the certainty of the diagnosis."
            },
            {
                "id": "Extension.url",
                "path": "Extension.url",
                "fixedUri": "https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-Evidence"
            },
            {
                "id": "Extension.value[x]",
                "path": "Extension.value[x]",
                "short": "A reference to results of investigations that confirmed the certainty of the diagnosis",
                "definition": "A reference to results of investigations that confirmed the certainty of the diagnosis.",
                "min": 1,
                "type":  [
                    {
                        "code": "Reference",
                        "targetProfile":  [
                            "https://fhir.hl7.org.uk/StructureDefinition/UKCore-DiagnosticReport"
                        ]
                    }
                ]
            },
            {
                "id": "Extension.value[x].identifier.assigner",
                "path": "Extension.value[x].identifier.assigner",
                "type":  [
                    {
                        "code": "Reference",
                        "targetProfile":  [
                            "https://fhir.hl7.org.uk/StructureDefinition/UKCore-Organization"
                        ]
                    }
                ]
            }
        ]
    }
}

Examples

Example UKCore-AllergyIntolerance-Extension-Evidence

StructureDefinition Extension-UKCore-MainLocation

Information describing the main location of the organisation.

Purpose

This extension extends the Organization resource to support the exchange of information on the organisation's main location, as a reference to a Location resource, which is currently not supported by the FHIR standard.

Context of Use
Use on element	Organization

Snapshot View

Extension	I		Extension	Element Id Extension Short description The main location of the organisation Definition An extension which references the main location of the organisation. Data Type Extension Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
url		1..1	System.StringFixed Value	Element Id Extension.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data Type System.String Fixed Value https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-MainLocation Mappings rim:N/A
value[x]		1..1		Element Id Extension.value[x] Short description Reference to the main location of an organization Definition Reference to the main location of an organization. Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
reference	Σ I	0..1	string	There are no (further) constraints on this element Element Id Extension.value[x].reference Short description Literal reference, Relative, internal or absolute URL Definition A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources. Comments Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
type	Σ	0..1	uriBinding	There are no (further) constraints on this element Element Id Extension.value[x].type Short description Type the reference refers to (e.g. "Patient") Definition The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent. The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources). Comments This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified. Data Type uri Binding Aa resource (or, for logical models, the URI of the logical model). ResourceType (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
identifier	Σ	0..1	Identifier	There are no (further) constraints on this element Element Id Extension.value[x].identifier Short description Logical reference, when literal reference is not known Definition An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference. Comments When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it. Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation\|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any). Data Type Identifier Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CX / EI (occasionally, more often EI maps to a resource id or a URL) rim:II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd:Identifier rim:.identifier
use	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element Id Extension.value[x].identifier.use Short description usual \| official \| temp \| secondary \| old (If known) Definition The purpose of this identifier. Requirements Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. Comments Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. Data Type code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:N/A rim:Role.code or implied by context
type	Σ	0..1	CodeableConceptBinding	There are no (further) constraints on this element Element Id Extension.value[x].identifier.type Short description Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. Requirements Allows users to make use of identifiers when the identifier system is not known. Comments This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. Data Type CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE rim:CD orim:fhir:CodeableConcept rdfs:subClassOf dt:CD v2:CX.5 rim:Role.code or implied by context
system	Σ	0..1	uri	There are no (further) constraints on this element Element Id Extension.value[x].identifier.system Short description The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique. Requirements There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. Comments Identifier.system is always case sensitive. Data Type uri Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General http://www.acme.com/identifiers/patient Mappings rim:n/a v2:CX.4 / EI-2-4 rim:II.root or Role.id.root servd:./IdentifierType
value	Σ	0..1	string	There are no (further) constraints on this element Element Id Extension.value[x].identifier.value Short description The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system. Comments If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General 123456 Mappings rim:n/a v2:CX.1 / EI.1 rim:II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd:./Value
period	Σ I	0..1	Period	There are no (further) constraints on this element Element Id Extension.value[x].identifier.period Short description Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use. Comments A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration. Data Type Period Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` per-1:If present, start SHALL have a lower value than end `start.hasValue().not() or end.hasValue().not() or (start <= end)` Mappings rim:n/a v2:DR rim:IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"] v2:CX.7 + CX.8 rim:Role.effectiveTime or implied by context servd:./StartDate and ./EndDate
assigner	Σ I	0..1	Reference(UK Core Organization)	Element Id Extension.value[x].identifier.assigner Short description Organization that issued id (may be just text) Definition Organization that issued/manages the identifier. Comments The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. Data Type Reference(UK Core Organization) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1:SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim:n/a rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2:CX.4 / (CX.4,CX.9,CX.10) rim:II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd:./IdentifierIssuingAuthority
display	Σ	0..1	string	There are no (further) constraints on this element Element Id Extension.value[x].display Short description Text alternative for the resource Definition Plain text narrative that identifies the resource in addition to the resource reference. Comments This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
valueReference			Reference(UK Core Location)	Data Type Reference(UK Core Location)

Differential View

Extension	I		Extension	Element Id Extension Short description The main location of the organisation Definition An extension which references the main location of the organisation. Data Type Extension Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
url		1..1	System.StringFixed Value	Element Id Extension.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data Type System.String Fixed Value https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-MainLocation Mappings rim:N/A
value[x]		1..1		Element Id Extension.value[x] Short description Reference to the main location of an organization Definition Reference to the main location of an organization. Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
reference	Σ I	0..1	string	There are no (further) constraints on this element Element Id Extension.value[x].reference Short description Literal reference, Relative, internal or absolute URL Definition A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources. Comments Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
type	Σ	0..1	uriBinding	There are no (further) constraints on this element Element Id Extension.value[x].type Short description Type the reference refers to (e.g. "Patient") Definition The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent. The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources). Comments This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified. Data Type uri Binding Aa resource (or, for logical models, the URI of the logical model). ResourceType (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
identifier	Σ	0..1	Identifier	There are no (further) constraints on this element Element Id Extension.value[x].identifier Short description Logical reference, when literal reference is not known Definition An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference. Comments When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it. Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation\|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any). Data Type Identifier Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CX / EI (occasionally, more often EI maps to a resource id or a URL) rim:II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd:Identifier rim:.identifier
use	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element Id Extension.value[x].identifier.use Short description usual \| official \| temp \| secondary \| old (If known) Definition The purpose of this identifier. Requirements Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. Comments Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. Data Type code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:N/A rim:Role.code or implied by context
type	Σ	0..1	CodeableConceptBinding	There are no (further) constraints on this element Element Id Extension.value[x].identifier.type Short description Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. Requirements Allows users to make use of identifiers when the identifier system is not known. Comments This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. Data Type CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE rim:CD orim:fhir:CodeableConcept rdfs:subClassOf dt:CD v2:CX.5 rim:Role.code or implied by context
system	Σ	0..1	uri	There are no (further) constraints on this element Element Id Extension.value[x].identifier.system Short description The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique. Requirements There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. Comments Identifier.system is always case sensitive. Data Type uri Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General http://www.acme.com/identifiers/patient Mappings rim:n/a v2:CX.4 / EI-2-4 rim:II.root or Role.id.root servd:./IdentifierType
value	Σ	0..1	string	There are no (further) constraints on this element Element Id Extension.value[x].identifier.value Short description The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system. Comments If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General 123456 Mappings rim:n/a v2:CX.1 / EI.1 rim:II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd:./Value
period	Σ I	0..1	Period	There are no (further) constraints on this element Element Id Extension.value[x].identifier.period Short description Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use. Comments A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration. Data Type Period Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` per-1:If present, start SHALL have a lower value than end `start.hasValue().not() or end.hasValue().not() or (start <= end)` Mappings rim:n/a v2:DR rim:IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"] v2:CX.7 + CX.8 rim:Role.effectiveTime or implied by context servd:./StartDate and ./EndDate
assigner	Σ I	0..1	Reference(UK Core Organization)	Element Id Extension.value[x].identifier.assigner Short description Organization that issued id (may be just text) Definition Organization that issued/manages the identifier. Comments The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. Data Type Reference(UK Core Organization) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1:SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim:n/a rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2:CX.4 / (CX.4,CX.9,CX.10) rim:II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd:./IdentifierIssuingAuthority
display	Σ	0..1	string	There are no (further) constraints on this element Element Id Extension.value[x].display Short description Text alternative for the resource Definition Plain text narrative that identifies the resource in addition to the resource reference. Comments This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
valueReference			Reference(UK Core Location)	Data Type Reference(UK Core Location)

Hybrid View

Extension	I		Extension	Element Id Extension Short description The main location of the organisation Definition An extension which references the main location of the organisation. Data Type Extension Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
url		1..1	System.StringFixed Value	Element Id Extension.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data Type System.String Fixed Value https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-MainLocation Mappings rim:N/A
value[x]		1..1		Element Id Extension.value[x] Short description Reference to the main location of an organization Definition Reference to the main location of an organization. Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
reference	Σ I	0..1	string	There are no (further) constraints on this element Element Id Extension.value[x].reference Short description Literal reference, Relative, internal or absolute URL Definition A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources. Comments Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
type	Σ	0..1	uriBinding	There are no (further) constraints on this element Element Id Extension.value[x].type Short description Type the reference refers to (e.g. "Patient") Definition The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent. The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources). Comments This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified. Data Type uri Binding Aa resource (or, for logical models, the URI of the logical model). ResourceType (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
identifier	Σ	0..1	Identifier	There are no (further) constraints on this element Element Id Extension.value[x].identifier Short description Logical reference, when literal reference is not known Definition An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference. Comments When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it. Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation\|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any). Data Type Identifier Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CX / EI (occasionally, more often EI maps to a resource id or a URL) rim:II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd:Identifier rim:.identifier
use	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element Id Extension.value[x].identifier.use Short description usual \| official \| temp \| secondary \| old (If known) Definition The purpose of this identifier. Requirements Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. Comments Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. Data Type code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:N/A rim:Role.code or implied by context
type	Σ	0..1	CodeableConceptBinding	There are no (further) constraints on this element Element Id Extension.value[x].identifier.type Short description Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. Requirements Allows users to make use of identifiers when the identifier system is not known. Comments This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. Data Type CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE rim:CD orim:fhir:CodeableConcept rdfs:subClassOf dt:CD v2:CX.5 rim:Role.code or implied by context
system	Σ	0..1	uri	There are no (further) constraints on this element Element Id Extension.value[x].identifier.system Short description The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique. Requirements There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. Comments Identifier.system is always case sensitive. Data Type uri Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General http://www.acme.com/identifiers/patient Mappings rim:n/a v2:CX.4 / EI-2-4 rim:II.root or Role.id.root servd:./IdentifierType
value	Σ	0..1	string	There are no (further) constraints on this element Element Id Extension.value[x].identifier.value Short description The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system. Comments If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General 123456 Mappings rim:n/a v2:CX.1 / EI.1 rim:II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd:./Value
period	Σ I	0..1	Period	There are no (further) constraints on this element Element Id Extension.value[x].identifier.period Short description Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use. Comments A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration. Data Type Period Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` per-1:If present, start SHALL have a lower value than end `start.hasValue().not() or end.hasValue().not() or (start <= end)` Mappings rim:n/a v2:DR rim:IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"] v2:CX.7 + CX.8 rim:Role.effectiveTime or implied by context servd:./StartDate and ./EndDate
assigner	Σ I	0..1	Reference(UK Core Organization)	Element Id Extension.value[x].identifier.assigner Short description Organization that issued id (may be just text) Definition Organization that issued/manages the identifier. Comments The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. Data Type Reference(UK Core Organization) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1:SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim:n/a rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2:CX.4 / (CX.4,CX.9,CX.10) rim:II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd:./IdentifierIssuingAuthority
display	Σ	0..1	string	There are no (further) constraints on this element Element Id Extension.value[x].display Short description Text alternative for the resource Definition Plain text narrative that identifies the resource in addition to the resource reference. Comments This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
valueReference			Reference(UK Core Location)	Data Type Reference(UK Core Location)

Table View

Extension		..
Extension.url		..
Extension.value[x]	Reference(UK Core Location)	1..
Extension.value[x].identifier		..
Extension.value[x].identifier.assigner	Reference(UK Core Organization)	..

XML View

<StructureDefinition xmlns="http://hl7.org/fhir">
    <id value="Extension-UKCore-MainLocation" />
    <url value="https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-MainLocation" />
    <version value="2.1.0" />
    <name value="ExtensionUKCoreMainLocation" />
    <title value="Extension UK Core Main Location" />
    <status value="active" />
    <date value="2021-09-10" />
    <publisher value="HL7 UK" />
    <contact>
        <name value="HL7 UK" />
        <telecom>
            <system value="email" />
            <value value="secretariat@hl7.org.uk" />
            <use value="work" />
            <rank value="1" />
        </telecom>
    </contact>
    <contact>
        <name value="NHS Digital" />
        <telecom>
            <system value="email" />
            <value value="interoperabilityteam@nhs.net" />
            <use value="work" />
            <rank value="2" />
        </telecom>
    </contact>
    <description value="Information describing the main location of the organisation." />
    <purpose value="This extension extends the Organization resource to support the exchange of information on the Organization&#39;s main location, as a reference to a Location resource, which is currently not supported by the FHIR standard." />
    <copyright value="Copyright &#169; 2021+ HL7 UK Licensed under the Apache License, Version 2.0 (the &quot;License&quot;); you may not use this file except in compliance with the License. You may obtain a copy of the License at  http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an &quot;AS IS&quot; BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. HL7&#174; FHIR&#174; standard Copyright &#169; 2011+ HL7 The HL7&#174; FHIR&#174; standard is used under the FHIR license. You may obtain a copy of the FHIR license at  https://www.hl7.org/fhir/license.html." />
    <fhirVersion value="4.0.1" />
    <mapping>
        <identity value="rim" />
        <uri value="http://hl7.org/v3" />
        <name value="RIM Mapping" />
    </mapping>
    <kind value="complex-type" />
    <abstract value="false" />
    <context>
        <type value="element" />
        <expression value="Organization" />
    </context>
    <type value="Extension" />
    <baseDefinition value="http://hl7.org/fhir/StructureDefinition/Extension" />
    <derivation value="constraint" />
    <differential>
        <element id="Extension">
            <path value="Extension" />
            <short value="The main location of the organisation" />
            <definition value="An extension which references the main location of the organisation." />
        </element>
        <element id="Extension.url">
            <path value="Extension.url" />
            <fixedUri value="https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-MainLocation" />
        </element>
        <element id="Extension.value[x]">
            <path value="Extension.value[x]" />
            <short value="Reference to the main location of an organization" />
            <definition value="Reference to the main location of an organization." />
            <min value="1" />
            <type>
                <code value="Reference" />
                <targetProfile value="https://fhir.hl7.org.uk/StructureDefinition/UKCore-Location" />
            </type>
        </element>
        <element id="Extension.value[x].identifier.assigner">
            <path value="Extension.value[x].identifier.assigner" />
            <type>
                <code value="Reference" />
                <targetProfile value="https://fhir.hl7.org.uk/StructureDefinition/UKCore-Organization" />
            </type>
        </element>
    </differential>
</StructureDefinition>

JSON View

{
    "resourceType": "StructureDefinition",
    "id": "Extension-UKCore-MainLocation",
    "url": "https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-MainLocation",
    "version": "2.1.0",
    "name": "ExtensionUKCoreMainLocation",
    "title": "Extension UK Core Main Location",
    "status": "active",
    "date": "2021-09-10",
    "publisher": "HL7 UK",
    "contact":  [
        {
            "name": "HL7 UK",
            "telecom":  [
                {
                    "system": "email",
                    "value": "secretariat@hl7.org.uk",
                    "use": "work",
                    "rank": 1
                }
            ]
        },
        {
            "name": "NHS Digital",
            "telecom":  [
                {
                    "system": "email",
                    "value": "interoperabilityteam@nhs.net",
                    "use": "work",
                    "rank": 2
                }
            ]
        }
    ],
    "description": "Information describing the main location of the organisation.",
    "purpose": "This extension extends the Organization resource to support the exchange of information on the Organization's main location, as a reference to a Location resource, which is currently not supported by the FHIR standard.",
    "copyright": "Copyright © 2021+ HL7 UK Licensed under the Apache License, Version 2.0 (the \"License\"); you may not use this file except in compliance with the License. You may obtain a copy of the License at  http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an \"AS IS\" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. HL7® FHIR® standard Copyright © 2011+ HL7 The HL7® FHIR® standard is used under the FHIR license. You may obtain a copy of the FHIR license at  https://www.hl7.org/fhir/license.html.",
    "fhirVersion": "4.0.1",
    "mapping":  [
        {
            "identity": "rim",
            "uri": "http://hl7.org/v3",
            "name": "RIM Mapping"
        }
    ],
    "kind": "complex-type",
    "abstract": false,
    "context":  [
        {
            "type": "element",
            "expression": "Organization"
        }
    ],
    "type": "Extension",
    "baseDefinition": "http://hl7.org/fhir/StructureDefinition/Extension",
    "derivation": "constraint",
    "differential": {
        "element":  [
            {
                "id": "Extension",
                "path": "Extension",
                "short": "The main location of the organisation",
                "definition": "An extension which references the main location of the organisation."
            },
            {
                "id": "Extension.url",
                "path": "Extension.url",
                "fixedUri": "https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-MainLocation"
            },
            {
                "id": "Extension.value[x]",
                "path": "Extension.value[x]",
                "short": "Reference to the main location of an organization",
                "definition": "Reference to the main location of an organization.",
                "min": 1,
                "type":  [
                    {
                        "code": "Reference",
                        "targetProfile":  [
                            "https://fhir.hl7.org.uk/StructureDefinition/UKCore-Location"
                        ]
                    }
                ]
            },
            {
                "id": "Extension.value[x].identifier.assigner",
                "path": "Extension.value[x].identifier.assigner",
                "type":  [
                    {
                        "code": "Reference",
                        "targetProfile":  [
                            "https://fhir.hl7.org.uk/StructureDefinition/UKCore-Organization"
                        ]
                    }
                ]
            }
        ]
    }
}

Examples

Organization - An example to illustrate the extension of an organisation to carry the main location of that organisation.

Example UKCore-Organization-Extension-MainLocation

StructureDefinition Extension-UKCore-MedicationRepeatInformation

The specific repeat information of a medication item.

Purpose

This extension extends the MedicationRequest resource to support the exchange of repeat medication data items, which are currently not supported by the FHIR standard.

Context of Use
Use on element	MedicationRequest

Snapshot View

Extension	I		Extension	Element Id Extension Short description Medication repeat information Definition Medication repeat information. Data Type Extension Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
extension	I	0..*	Extension	Element Id Extension.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data Type Extension Sliced: Unordered, Open, by url(Value) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
numberOfPrescriptionsIssued	I	0..1	Extension	Element Id Extension.extension:numberOfPrescriptionsIssued Short description The specific number of times a repeat prescription has been issued Alternate names extensions, user content Definition An integer recording the number of times a repeat prescription has been issued. This integer does not include the original order dispense. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data Type Extension Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
url		1..1	System.StringFixed Value	Element Id Extension.extension:numberOfPrescriptionsIssued.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data Type System.String Fixed Value numberOfPrescriptionsIssued Mappings rim:N/A
value[x]		1..1		Element Id Extension.extension:numberOfPrescriptionsIssued.value[x] Short description The specific number of times a repeat prescription has been issued Definition An integer recording the number of times a repeat prescription has been issued. This integer does not include the original order dispense. Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
valueUnsignedInt			unsignedInt	Data Type unsignedInt
authorisationExpiryDate	I	0..1	Extension	Element Id Extension.extension:authorisationExpiryDate Short description Repeat prescription review date Alternate names extensions, user content Definition The date a prescriber must review a repeat prescription with the patient. This is distinct from dispenseRequest.validityPeriod.end, which marks when a dispensing cycle ends e.g. in Electronic Repeat Dispensing Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data Type Extension Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
url		1..1	System.StringFixed Value	Element Id Extension.extension:authorisationExpiryDate.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data Type System.String Fixed Value authorisationExpiryDate Mappings rim:N/A
value[x]		1..1		Element Id Extension.extension:authorisationExpiryDate.value[x] Short description Repeat prescription review date Definition Repeat prescription review date. Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
valueDateTime			dateTime	Data Type dateTime
url		1..1	System.StringFixed Value	Element Id Extension.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data Type System.String Fixed Value https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-MedicationRepeatInformation Mappings rim:N/A
value[x]		0..0		There are no (further) constraints on this element Element Id Extension.value[x] Short description Value of extension Definition Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A

Differential View

Extension	I		Extension	Element Id Extension Short description Medication repeat information Definition Medication repeat information. Data Type Extension Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
extension	I	0..*	Extension	Element Id Extension.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data Type Extension Sliced: Unordered, Open, by url(Value) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
numberOfPrescriptionsIssued	I	0..1	Extension	Element Id Extension.extension:numberOfPrescriptionsIssued Short description The specific number of times a repeat prescription has been issued Alternate names extensions, user content Definition An integer recording the number of times a repeat prescription has been issued. This integer does not include the original order dispense. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data Type Extension Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
url		1..1	System.StringFixed Value	Element Id Extension.extension:numberOfPrescriptionsIssued.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data Type System.String Fixed Value numberOfPrescriptionsIssued Mappings rim:N/A
value[x]		1..1		Element Id Extension.extension:numberOfPrescriptionsIssued.value[x] Short description The specific number of times a repeat prescription has been issued Definition An integer recording the number of times a repeat prescription has been issued. This integer does not include the original order dispense. Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
valueUnsignedInt			unsignedInt	Data Type unsignedInt
authorisationExpiryDate	I	0..1	Extension	Element Id Extension.extension:authorisationExpiryDate Short description Repeat prescription review date Alternate names extensions, user content Definition The date a prescriber must review a repeat prescription with the patient. This is distinct from dispenseRequest.validityPeriod.end, which marks when a dispensing cycle ends e.g. in Electronic Repeat Dispensing Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data Type Extension Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
url		1..1	System.StringFixed Value	Element Id Extension.extension:authorisationExpiryDate.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data Type System.String Fixed Value authorisationExpiryDate Mappings rim:N/A
value[x]		1..1		Element Id Extension.extension:authorisationExpiryDate.value[x] Short description Repeat prescription review date Definition Repeat prescription review date. Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
valueDateTime			dateTime	Data Type dateTime
url		1..1	System.StringFixed Value	Element Id Extension.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data Type System.String Fixed Value https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-MedicationRepeatInformation Mappings rim:N/A
value[x]		0..0		There are no (further) constraints on this element Element Id Extension.value[x] Short description Value of extension Definition Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A

Hybrid View

Extension	I		Extension	Element Id Extension Short description Medication repeat information Definition Medication repeat information. Data Type Extension Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
extension	I	0..*	Extension	Element Id Extension.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data Type Extension Sliced: Unordered, Open, by url(Value) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
numberOfPrescriptionsIssued	I	0..1	Extension	Element Id Extension.extension:numberOfPrescriptionsIssued Short description The specific number of times a repeat prescription has been issued Alternate names extensions, user content Definition An integer recording the number of times a repeat prescription has been issued. This integer does not include the original order dispense. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data Type Extension Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
url		1..1	System.StringFixed Value	Element Id Extension.extension:numberOfPrescriptionsIssued.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data Type System.String Fixed Value numberOfPrescriptionsIssued Mappings rim:N/A
value[x]		1..1		Element Id Extension.extension:numberOfPrescriptionsIssued.value[x] Short description The specific number of times a repeat prescription has been issued Definition An integer recording the number of times a repeat prescription has been issued. This integer does not include the original order dispense. Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
valueUnsignedInt			unsignedInt	Data Type unsignedInt
authorisationExpiryDate	I	0..1	Extension	Element Id Extension.extension:authorisationExpiryDate Short description Repeat prescription review date Alternate names extensions, user content Definition The date a prescriber must review a repeat prescription with the patient. This is distinct from dispenseRequest.validityPeriod.end, which marks when a dispensing cycle ends e.g. in Electronic Repeat Dispensing Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data Type Extension Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
url		1..1	System.StringFixed Value	Element Id Extension.extension:authorisationExpiryDate.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data Type System.String Fixed Value authorisationExpiryDate Mappings rim:N/A
value[x]		1..1		Element Id Extension.extension:authorisationExpiryDate.value[x] Short description Repeat prescription review date Definition Repeat prescription review date. Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
valueDateTime			dateTime	Data Type dateTime
url		1..1	System.StringFixed Value	Element Id Extension.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data Type System.String Fixed Value https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-MedicationRepeatInformation Mappings rim:N/A
value[x]		0..0		There are no (further) constraints on this element Element Id Extension.value[x] Short description Value of extension Definition Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A

Table View

Extension		..1
Extension.extension		..
Extension.extension		..1
Extension.extension.url		..
Extension.extension.value[x]	unsignedInt	1..
Extension.extension		..1
Extension.extension.url		..
Extension.extension.value[x]	dateTime	1..
Extension.url		..
Extension.value[x]		..0

XML View

<StructureDefinition xmlns="http://hl7.org/fhir">
    <id value="Extension-UKCore-MedicationRepeatInformation" />
    <url value="https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-MedicationRepeatInformation" />
    <version value="2.2.0" />
    <name value="ExtensionUKCoreMedicationRepeatInformation" />
    <title value="Extension UK Core Medication Repeat Information" />
    <status value="active" />
    <date value="2022-08-26" />
    <publisher value="HL7 UK" />
    <contact>
        <name value="HL7 UK" />
        <telecom>
            <system value="email" />
            <value value="secretariat@hl7.org.uk" />
            <use value="work" />
            <rank value="1" />
        </telecom>
    </contact>
    <contact>
        <name value="NHS Digital" />
        <telecom>
            <system value="email" />
            <value value="interoperabilityteam@nhs.net" />
            <use value="work" />
            <rank value="2" />
        </telecom>
    </contact>
    <description value="The specific repeat information of a medication item." />
    <purpose value="This extension extends the MedicationRequest resource to support the exchange of repeat medication data items, which are currently not supported by the FHIR standard." />
    <copyright value="Copyright &#169; 2021+ HL7 UK Licensed under the Apache License, Version 2.0 (the &quot;License&quot;); you may not use this file except in compliance with the License. You may obtain a copy of the License at  http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an &quot;AS IS&quot; BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. HL7&#174; FHIR&#174; standard Copyright &#169; 2011+ HL7 The HL7&#174; FHIR&#174; standard is used under the FHIR license. You may obtain a copy of the FHIR license at  https://www.hl7.org/fhir/license.html." />
    <fhirVersion value="4.0.1" />
    <mapping>
        <identity value="rim" />
        <uri value="http://hl7.org/v3" />
        <name value="RIM Mapping" />
    </mapping>
    <kind value="complex-type" />
    <abstract value="false" />
    <context>
        <type value="element" />
        <expression value="MedicationRequest" />
    </context>
    <type value="Extension" />
    <baseDefinition value="http://hl7.org/fhir/StructureDefinition/Extension" />
    <derivation value="constraint" />
    <differential>
        <element id="Extension">
            <path value="Extension" />
            <short value="Medication repeat information" />
            <definition value="Medication repeat information." />
            <max value="1" />
        </element>
        <element id="Extension.extension">
            <path value="Extension.extension" />
            <slicing>
                <discriminator>
                    <type value="value" />
                    <path value="url" />
                </discriminator>
                <rules value="open" />
            </slicing>
        </element>
        <element id="Extension.extension:numberOfPrescriptionsIssued">
            <path value="Extension.extension" />
            <sliceName value="numberOfPrescriptionsIssued" />
            <short value="The specific number of times a repeat prescription has been issued" />
            <definition value="An integer recording the number of times a repeat prescription has been issued. This integer does not include the original order dispense." />
            <max value="1" />
        </element>
        <element id="Extension.extension:numberOfPrescriptionsIssued.url">
            <path value="Extension.extension.url" />
            <fixedUri value="numberOfPrescriptionsIssued" />
        </element>
        <element id="Extension.extension:numberOfPrescriptionsIssued.value[x]">
            <path value="Extension.extension.value[x]" />
            <short value="The specific number of times a repeat prescription has been issued" />
            <definition value="An integer recording the number of times a repeat prescription has been issued. This integer does not include the original order dispense." />
            <min value="1" />
            <type>
                <code value="unsignedInt" />
            </type>
        </element>
        <element id="Extension.extension:authorisationExpiryDate">
            <path value="Extension.extension" />
            <sliceName value="authorisationExpiryDate" />
            <short value="Repeat prescription review date" />
            <definition value="The date a prescriber must review a repeat prescription with the patient. This is distinct from dispenseRequest.validityPeriod.end, which marks when a dispensing cycle ends e.g. in Electronic Repeat Dispensing" />
            <max value="1" />
        </element>
        <element id="Extension.extension:authorisationExpiryDate.url">
            <path value="Extension.extension.url" />
            <fixedUri value="authorisationExpiryDate" />
        </element>
        <element id="Extension.extension:authorisationExpiryDate.value[x]">
            <path value="Extension.extension.value[x]" />
            <short value="Repeat prescription review date" />
            <definition value="Repeat prescription review date." />
            <min value="1" />
            <type>
                <code value="dateTime" />
            </type>
        </element>
        <element id="Extension.url">
            <path value="Extension.url" />
            <fixedUri value="https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-MedicationRepeatInformation" />
        </element>
        <element id="Extension.value[x]">
            <path value="Extension.value[x]" />
            <max value="0" />
        </element>
    </differential>
</StructureDefinition>

JSON View

{
    "resourceType": "StructureDefinition",
    "id": "Extension-UKCore-MedicationRepeatInformation",
    "url": "https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-MedicationRepeatInformation",
    "version": "2.2.0",
    "name": "ExtensionUKCoreMedicationRepeatInformation",
    "title": "Extension UK Core Medication Repeat Information",
    "status": "active",
    "date": "2022-08-26",
    "publisher": "HL7 UK",
    "contact":  [
        {
            "name": "HL7 UK",
            "telecom":  [
                {
                    "system": "email",
                    "value": "secretariat@hl7.org.uk",
                    "use": "work",
                    "rank": 1
                }
            ]
        },
        {
            "name": "NHS Digital",
            "telecom":  [
                {
                    "system": "email",
                    "value": "interoperabilityteam@nhs.net",
                    "use": "work",
                    "rank": 2
                }
            ]
        }
    ],
    "description": "The specific repeat information of a medication item.",
    "purpose": "This extension extends the MedicationRequest resource to support the exchange of repeat medication data items, which are currently not supported by the FHIR standard.",
    "copyright": "Copyright © 2021+ HL7 UK Licensed under the Apache License, Version 2.0 (the \"License\"); you may not use this file except in compliance with the License. You may obtain a copy of the License at  http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an \"AS IS\" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. HL7® FHIR® standard Copyright © 2011+ HL7 The HL7® FHIR® standard is used under the FHIR license. You may obtain a copy of the FHIR license at  https://www.hl7.org/fhir/license.html.",
    "fhirVersion": "4.0.1",
    "mapping":  [
        {
            "identity": "rim",
            "uri": "http://hl7.org/v3",
            "name": "RIM Mapping"
        }
    ],
    "kind": "complex-type",
    "abstract": false,
    "context":  [
        {
            "type": "element",
            "expression": "MedicationRequest"
        }
    ],
    "type": "Extension",
    "baseDefinition": "http://hl7.org/fhir/StructureDefinition/Extension",
    "derivation": "constraint",
    "differential": {
        "element":  [
            {
                "id": "Extension",
                "path": "Extension",
                "short": "Medication repeat information",
                "definition": "Medication repeat information.",
                "max": "1"
            },
            {
                "id": "Extension.extension",
                "path": "Extension.extension",
                "slicing": {
                    "discriminator":  [
                        {
                            "type": "value",
                            "path": "url"
                        }
                    ],
                    "rules": "open"
                }
            },
            {
                "id": "Extension.extension:numberOfPrescriptionsIssued",
                "path": "Extension.extension",
                "sliceName": "numberOfPrescriptionsIssued",
                "short": "The specific number of times a repeat prescription has been issued",
                "definition": "An integer recording the number of times a repeat prescription has been issued. This integer does not include the original order dispense.",
                "max": "1"
            },
            {
                "id": "Extension.extension:numberOfPrescriptionsIssued.url",
                "path": "Extension.extension.url",
                "fixedUri": "numberOfPrescriptionsIssued"
            },
            {
                "id": "Extension.extension:numberOfPrescriptionsIssued.value[x]",
                "path": "Extension.extension.value[x]",
                "short": "The specific number of times a repeat prescription has been issued",
                "definition": "An integer recording the number of times a repeat prescription has been issued. This integer does not include the original order dispense.",
                "min": 1,
                "type":  [
                    {
                        "code": "unsignedInt"
                    }
                ]
            },
            {
                "id": "Extension.extension:authorisationExpiryDate",
                "path": "Extension.extension",
                "sliceName": "authorisationExpiryDate",
                "short": "Repeat prescription review date",
                "definition": "The date a prescriber must review a repeat prescription with the patient. This is distinct from dispenseRequest.validityPeriod.end, which marks when a dispensing cycle ends e.g. in Electronic Repeat Dispensing",
                "max": "1"
            },
            {
                "id": "Extension.extension:authorisationExpiryDate.url",
                "path": "Extension.extension.url",
                "fixedUri": "authorisationExpiryDate"
            },
            {
                "id": "Extension.extension:authorisationExpiryDate.value[x]",
                "path": "Extension.extension.value[x]",
                "short": "Repeat prescription review date",
                "definition": "Repeat prescription review date.",
                "min": 1,
                "type":  [
                    {
                        "code": "dateTime"
                    }
                ]
            },
            {
                "id": "Extension.url",
                "path": "Extension.url",
                "fixedUri": "https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-MedicationRepeatInformation"
            },
            {
                "id": "Extension.value[x]",
                "path": "Extension.value[x]",
                "max": "0"
            }
        ]
    }
}

Examples

Example UKCore-MedicationRequest-Extension-RepeatInformation

StructureDefinition Extension-UKCore-MedicationPrescribingOrganizationType

This describes the type of organisation or setting responsible for authorising and issuing a medication, but not the organisation or setting delivering the patient care.

Purpose

This extension extends the MedicationStatement resource to hold the type of organisation or setting responsible for authorising and issuing a medication, which is currently not supported by the FHIR standard.

Context of Use
Use on element	MedicationStatement

Snapshot View

Extension	I		Extension	Element Id Extension Short description The type of organisation or setting responsible for authorising and issuing a medication Definition This extension carries the type of organisation or setting responsible for authorising and issuing a medication. Data Type Extension Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
url		1..1	System.StringFixed Value	Element Id Extension.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data Type System.String Fixed Value https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-MedicationPrescribingOrganizationType Mappings rim:N/A
value[x]		1..1	Binding	Element Id Extension.value[x] Short description The type of organisation or setting responsible for authorising and issuing a medication Definition A value for the type of organisation or setting responsible for authorising and issuing a medication. Binding UKCoreMedicationPrescribingOrganizationType (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
valueCodeableConcept			CodeableConcept	Data Type CodeableConcept

Differential View

Extension	I		Extension	Element Id Extension Short description The type of organisation or setting responsible for authorising and issuing a medication Definition This extension carries the type of organisation or setting responsible for authorising and issuing a medication. Data Type Extension Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
url		1..1	System.StringFixed Value	Element Id Extension.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data Type System.String Fixed Value https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-MedicationPrescribingOrganizationType Mappings rim:N/A
value[x]		1..1	Binding	Element Id Extension.value[x] Short description The type of organisation or setting responsible for authorising and issuing a medication Definition A value for the type of organisation or setting responsible for authorising and issuing a medication. Binding UKCoreMedicationPrescribingOrganizationType (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
valueCodeableConcept			CodeableConcept	Data Type CodeableConcept

Hybrid View

Extension	I		Extension	Element Id Extension Short description The type of organisation or setting responsible for authorising and issuing a medication Definition This extension carries the type of organisation or setting responsible for authorising and issuing a medication. Data Type Extension Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
url		1..1	System.StringFixed Value	Element Id Extension.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data Type System.String Fixed Value https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-MedicationPrescribingOrganizationType Mappings rim:N/A
value[x]		1..1	Binding	Element Id Extension.value[x] Short description The type of organisation or setting responsible for authorising and issuing a medication Definition A value for the type of organisation or setting responsible for authorising and issuing a medication. Binding UKCoreMedicationPrescribingOrganizationType (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
valueCodeableConcept			CodeableConcept	Data Type CodeableConcept

Table View

Extension		..1
Extension.url		..
Extension.value[x]	CodeableConcept	1..

XML View

<StructureDefinition xmlns="http://hl7.org/fhir">
    <id value="Extension-UKCore-MedicationPrescribingOrganizationType" />
    <url value="https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-MedicationPrescribingOrganizationType" />
    <version value="1.1.0" />
    <name value="ExtensionUKCoreMedicationPrescribingOrganizationType" />
    <title value="Extension UK Core Medication Prescribing Organization Type" />
    <status value="active" />
    <date value="2022-08-26" />
    <publisher value="HL7 UK" />
    <contact>
        <name value="HL7 UK" />
        <telecom>
            <system value="email" />
            <value value="secretariat@hl7.org.uk" />
            <use value="work" />
            <rank value="1" />
        </telecom>
    </contact>
    <contact>
        <name value="NHS Digital" />
        <telecom>
            <system value="email" />
            <value value="interoperabilityteam@nhs.net" />
            <use value="work" />
            <rank value="2" />
        </telecom>
    </contact>
    <description value="This describes the type of organisation or setting responsible for authorising and issuing a medication, but not the organisation or setting delivering the patient care." />
    <purpose value="This extension extends the MedicationStatement resource to hold the type of organisation or setting responsible for authorising and issuing a medication, which is currently not supported by the FHIR standard." />
    <copyright value="Copyright &#169; 2021+ HL7 UK Licensed under the Apache License, Version 2.0 (the &quot;License&quot;); you may not use this file except in compliance with the License. You may obtain a copy of the License at  http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an &quot;AS IS&quot; BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. HL7&#174; FHIR&#174; standard Copyright &#169; 2011+ HL7 The HL7&#174; FHIR&#174; standard is used under the FHIR license. You may obtain a copy of the FHIR license at  https://www.hl7.org/fhir/license.html." />
    <fhirVersion value="4.0.1" />
    <mapping>
        <identity value="rim" />
        <uri value="http://hl7.org/v3" />
        <name value="RIM Mapping" />
    </mapping>
    <kind value="complex-type" />
    <abstract value="false" />
    <context>
        <type value="element" />
        <expression value="MedicationStatement" />
    </context>
    <type value="Extension" />
    <baseDefinition value="http://hl7.org/fhir/StructureDefinition/Extension" />
    <derivation value="constraint" />
    <differential>
        <element id="Extension">
            <path value="Extension" />
            <short value="The type of organisation or setting responsible for authorising and issuing a medication" />
            <definition value="This extension carries the type of organisation or setting responsible for authorising and issuing a medication." />
            <max value="1" />
        </element>
        <element id="Extension.url">
            <path value="Extension.url" />
            <fixedUri value="https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-MedicationPrescribingOrganizationType" />
        </element>
        <element id="Extension.value[x]">
            <path value="Extension.value[x]" />
            <short value="The type of organisation or setting responsible for authorising and issuing a medication" />
            <definition value="A value for the type of organisation or setting responsible for authorising and issuing a medication." />
            <min value="1" />
            <type>
                <code value="CodeableConcept" />
            </type>
            <binding>
                <strength value="extensible" />
                <valueSet value="https://fhir.hl7.org.uk/ValueSet/UKCore-MedicationPrescribingOrganizationType" />
            </binding>
        </element>
    </differential>
</StructureDefinition>

JSON View

{
    "resourceType": "StructureDefinition",
    "id": "Extension-UKCore-MedicationPrescribingOrganizationType",
    "url": "https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-MedicationPrescribingOrganizationType",
    "version": "1.1.0",
    "name": "ExtensionUKCoreMedicationPrescribingOrganizationType",
    "title": "Extension UK Core Medication Prescribing Organization Type",
    "status": "active",
    "date": "2022-08-26",
    "publisher": "HL7 UK",
    "contact":  [
        {
            "name": "HL7 UK",
            "telecom":  [
                {
                    "system": "email",
                    "value": "secretariat@hl7.org.uk",
                    "use": "work",
                    "rank": 1
                }
            ]
        },
        {
            "name": "NHS Digital",
            "telecom":  [
                {
                    "system": "email",
                    "value": "interoperabilityteam@nhs.net",
                    "use": "work",
                    "rank": 2
                }
            ]
        }
    ],
    "description": "This describes the type of organisation or setting responsible for authorising and issuing a medication, but not the organisation or setting delivering the patient care.",
    "purpose": "This extension extends the MedicationStatement resource to hold the type of organisation or setting responsible for authorising and issuing a medication, which is currently not supported by the FHIR standard.",
    "copyright": "Copyright © 2021+ HL7 UK Licensed under the Apache License, Version 2.0 (the \"License\"); you may not use this file except in compliance with the License. You may obtain a copy of the License at  http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an \"AS IS\" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. HL7® FHIR® standard Copyright © 2011+ HL7 The HL7® FHIR® standard is used under the FHIR license. You may obtain a copy of the FHIR license at  https://www.hl7.org/fhir/license.html.",
    "fhirVersion": "4.0.1",
    "mapping":  [
        {
            "identity": "rim",
            "uri": "http://hl7.org/v3",
            "name": "RIM Mapping"
        }
    ],
    "kind": "complex-type",
    "abstract": false,
    "context":  [
        {
            "type": "element",
            "expression": "MedicationStatement"
        }
    ],
    "type": "Extension",
    "baseDefinition": "http://hl7.org/fhir/StructureDefinition/Extension",
    "derivation": "constraint",
    "differential": {
        "element":  [
            {
                "id": "Extension",
                "path": "Extension",
                "short": "The type of organisation or setting responsible for authorising and issuing a medication",
                "definition": "This extension carries the type of organisation or setting responsible for authorising and issuing a medication.",
                "max": "1"
            },
            {
                "id": "Extension.url",
                "path": "Extension.url",
                "fixedUri": "https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-MedicationPrescribingOrganizationType"
            },
            {
                "id": "Extension.value[x]",
                "path": "Extension.value[x]",
                "short": "The type of organisation or setting responsible for authorising and issuing a medication",
                "definition": "A value for the type of organisation or setting responsible for authorising and issuing a medication.",
                "min": 1,
                "type":  [
                    {
                        "code": "CodeableConcept"
                    }
                ],
                "binding": {
                    "strength": "extensible",
                    "valueSet": "https://fhir.hl7.org.uk/ValueSet/UKCore-MedicationPrescribingOrganizationType"
                }
            }
        ]
    }
}

Examples

Example UKCore-MedicationStatement-Extension-PrescribingOrg

StructureDefinition Extension-UKCore-MedicationStatementLastIssueDate

This describes the date when a prescription was last issued.

Purpose

This extension extends the MedicationStatement resource to support the exchange of the date information when a prescription was last issued, which is currently not supported by the FHIR standard.

Context of Use
Use on element	MedicationStatement

Snapshot View

Extension	I		Extension	Element Id Extension Short description The date when a prescription was last issued Definition This extension supports the exchange of the date information when a prescription was last issued. Data Type Extension Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
url		1..1	System.StringFixed Value	Element Id Extension.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data Type System.String Fixed Value https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-MedicationStatementLastIssueDate Mappings rim:N/A
value[x]		1..1		Element Id Extension.value[x] Short description The date when a prescription was last issued Definition This carries the date when a prescription was last issued. Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
valueDateTime			dateTime	Data Type dateTime

Differential View

Extension	I		Extension	Element Id Extension Short description The date when a prescription was last issued Definition This extension supports the exchange of the date information when a prescription was last issued. Data Type Extension Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
url		1..1	System.StringFixed Value	Element Id Extension.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data Type System.String Fixed Value https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-MedicationStatementLastIssueDate Mappings rim:N/A
value[x]		1..1		Element Id Extension.value[x] Short description The date when a prescription was last issued Definition This carries the date when a prescription was last issued. Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
valueDateTime			dateTime	Data Type dateTime

Hybrid View

Extension	I		Extension	Element Id Extension Short description The date when a prescription was last issued Definition This extension supports the exchange of the date information when a prescription was last issued. Data Type Extension Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
url		1..1	System.StringFixed Value	Element Id Extension.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data Type System.String Fixed Value https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-MedicationStatementLastIssueDate Mappings rim:N/A
value[x]		1..1		Element Id Extension.value[x] Short description The date when a prescription was last issued Definition This carries the date when a prescription was last issued. Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
valueDateTime			dateTime	Data Type dateTime

Table View

Extension		..1
Extension.url		..
Extension.value[x]	dateTime	1..

XML View

<StructureDefinition xmlns="http://hl7.org/fhir">
    <id value="Extension-UKCore-MedicationStatementLastIssueDate" />
    <url value="https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-MedicationStatementLastIssueDate" />
    <version value="2.1.0" />
    <name value="ExtensionUKCoreMedicationStatementLastIssueDate" />
    <title value="Extension UKCore Medication Statement Last Issue Date" />
    <status value="active" />
    <date value="2021-09-10" />
    <publisher value="HL7 UK" />
    <contact>
        <name value="HL7 UK" />
        <telecom>
            <system value="email" />
            <value value="secretariat@hl7.org.uk" />
            <use value="work" />
            <rank value="1" />
        </telecom>
    </contact>
    <contact>
        <name value="NHS Digital" />
        <telecom>
            <system value="email" />
            <value value="interoperabilityteam@nhs.net" />
            <use value="work" />
            <rank value="2" />
        </telecom>
    </contact>
    <description value="This describes the date when a prescription was last issued." />
    <purpose value="This extension extends the MedicationStatement resource to support the exchange of the date information when a prescription was last issued, which is currently not supported by the FHIR standard." />
    <copyright value="Copyright &#169; 2021+ HL7 UK Licensed under the Apache License, Version 2.0 (the &quot;License&quot;); you may not use this file except in compliance with the License. You may obtain a copy of the License at  http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an &quot;AS IS&quot; BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. HL7&#174; FHIR&#174; standard Copyright &#169; 2011+ HL7 The HL7&#174; FHIR&#174; standard is used under the FHIR license. You may obtain a copy of the FHIR license at  https://www.hl7.org/fhir/license.html." />
    <fhirVersion value="4.0.1" />
    <mapping>
        <identity value="rim" />
        <uri value="http://hl7.org/v3" />
        <name value="RIM Mapping" />
    </mapping>
    <kind value="complex-type" />
    <abstract value="false" />
    <context>
        <type value="element" />
        <expression value="MedicationStatement" />
    </context>
    <type value="Extension" />
    <baseDefinition value="http://hl7.org/fhir/StructureDefinition/Extension" />
    <derivation value="constraint" />
    <differential>
        <element id="Extension">
            <path value="Extension" />
            <short value="The date when a prescription was last issued" />
            <definition value="This extension supports the exchange of the date information when a prescription was last issued." />
            <max value="1" />
        </element>
        <element id="Extension.url">
            <path value="Extension.url" />
            <fixedUri value="https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-MedicationStatementLastIssueDate" />
        </element>
        <element id="Extension.value[x]">
            <path value="Extension.value[x]" />
            <short value="The date when a prescription was last issued" />
            <definition value="This carries the date when a prescription was last issued." />
            <min value="1" />
            <type>
                <code value="dateTime" />
            </type>
        </element>
    </differential>
</StructureDefinition>

JSON View

{
    "resourceType": "StructureDefinition",
    "id": "Extension-UKCore-MedicationStatementLastIssueDate",
    "url": "https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-MedicationStatementLastIssueDate",
    "version": "2.1.0",
    "name": "ExtensionUKCoreMedicationStatementLastIssueDate",
    "title": "Extension UKCore Medication Statement Last Issue Date",
    "status": "active",
    "date": "2021-09-10",
    "publisher": "HL7 UK",
    "contact":  [
        {
            "name": "HL7 UK",
            "telecom":  [
                {
                    "system": "email",
                    "value": "secretariat@hl7.org.uk",
                    "use": "work",
                    "rank": 1
                }
            ]
        },
        {
            "name": "NHS Digital",
            "telecom":  [
                {
                    "system": "email",
                    "value": "interoperabilityteam@nhs.net",
                    "use": "work",
                    "rank": 2
                }
            ]
        }
    ],
    "description": "This describes the date when a prescription was last issued.",
    "purpose": "This extension extends the MedicationStatement resource to support the exchange of the date information when a prescription was last issued, which is currently not supported by the FHIR standard.",
    "copyright": "Copyright © 2021+ HL7 UK Licensed under the Apache License, Version 2.0 (the \"License\"); you may not use this file except in compliance with the License. You may obtain a copy of the License at  http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an \"AS IS\" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. HL7® FHIR® standard Copyright © 2011+ HL7 The HL7® FHIR® standard is used under the FHIR license. You may obtain a copy of the FHIR license at  https://www.hl7.org/fhir/license.html.",
    "fhirVersion": "4.0.1",
    "mapping":  [
        {
            "identity": "rim",
            "uri": "http://hl7.org/v3",
            "name": "RIM Mapping"
        }
    ],
    "kind": "complex-type",
    "abstract": false,
    "context":  [
        {
            "type": "element",
            "expression": "MedicationStatement"
        }
    ],
    "type": "Extension",
    "baseDefinition": "http://hl7.org/fhir/StructureDefinition/Extension",
    "derivation": "constraint",
    "differential": {
        "element":  [
            {
                "id": "Extension",
                "path": "Extension",
                "short": "The date when a prescription was last issued",
                "definition": "This extension supports the exchange of the date information when a prescription was last issued.",
                "max": "1"
            },
            {
                "id": "Extension.url",
                "path": "Extension.url",
                "fixedUri": "https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-MedicationStatementLastIssueDate"
            },
            {
                "id": "Extension.value[x]",
                "path": "Extension.value[x]",
                "short": "The date when a prescription was last issued",
                "definition": "This carries the date when a prescription was last issued.",
                "min": 1,
                "type":  [
                    {
                        "code": "dateTime"
                    }
                ]
            }
        ]
    }
}

Examples

Example UKCore-MedicationStatement-Extension-LastIssueDate

StructureDefinition Extension-UKCore-MedicationTradeFamily

This Extension is used to identify a Trade Family or brand associated with a Medication, in particular a Virtual Therapeutic Moiety (VTM).

Purpose

This Extension extends the Medication resource to allow the exchange of data to indicate a Trade Family or brand associated with a medication which is not currently supported by the FHIR standard.

Context of Use
Use on element	Medication

Snapshot View

Extension	I		Extension	Element Id Extension Short description An extension used to identify a Trade Family or brand associated with a Medication, in particular a Virtual Therapeutic Moiety (VTM). Definition An extension used to identify a Trade Family or brand associated with a Medication, in particular a Virtual Therapeutic Moiety (VTM).. Data Type Extension Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
url		1..1	System.StringFixed Value	Element Id Extension.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data Type System.String Fixed Value https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-MedicationTradeFamily Mappings rim:N/A
value[x]		1..1	Binding	Element Id Extension.value[x] Short description A code from the SNOMED Clinical Terminology UK coding system to record a Trade Family associated with a Medication Definition A code from the SNOMED Clinical Terminology UK coding system to record a Trade Family associated with a Medication. Binding UKCoreMedicationTradeFamily (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
valueCodeableConcept			CodeableConcept	Data Type CodeableConcept

Differential View

Extension	I		Extension	Element Id Extension Short description An extension used to identify a Trade Family or brand associated with a Medication, in particular a Virtual Therapeutic Moiety (VTM). Definition An extension used to identify a Trade Family or brand associated with a Medication, in particular a Virtual Therapeutic Moiety (VTM).. Data Type Extension Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
url		1..1	System.StringFixed Value	Element Id Extension.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data Type System.String Fixed Value https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-MedicationTradeFamily Mappings rim:N/A
value[x]		1..1	Binding	Element Id Extension.value[x] Short description A code from the SNOMED Clinical Terminology UK coding system to record a Trade Family associated with a Medication Definition A code from the SNOMED Clinical Terminology UK coding system to record a Trade Family associated with a Medication. Binding UKCoreMedicationTradeFamily (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
valueCodeableConcept			CodeableConcept	Data Type CodeableConcept

Hybrid View

Extension	I		Extension	Element Id Extension Short description An extension used to identify a Trade Family or brand associated with a Medication, in particular a Virtual Therapeutic Moiety (VTM). Definition An extension used to identify a Trade Family or brand associated with a Medication, in particular a Virtual Therapeutic Moiety (VTM).. Data Type Extension Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
url		1..1	System.StringFixed Value	Element Id Extension.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data Type System.String Fixed Value https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-MedicationTradeFamily Mappings rim:N/A
value[x]		1..1	Binding	Element Id Extension.value[x] Short description A code from the SNOMED Clinical Terminology UK coding system to record a Trade Family associated with a Medication Definition A code from the SNOMED Clinical Terminology UK coding system to record a Trade Family associated with a Medication. Binding UKCoreMedicationTradeFamily (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
valueCodeableConcept			CodeableConcept	Data Type CodeableConcept

Table View

Extension		..1
Extension.url		..
Extension.value[x]	CodeableConcept	1..

XML View

<StructureDefinition xmlns="http://hl7.org/fhir">
    <id value="Extension-UKCore-MedicationTradeFamily" />
    <url value="https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-MedicationTradeFamily" />
    <version value="1.0.0" />
    <name value="ExtensionUKCoreMedicationTradeFamily" />
    <title value="Extension UK Core Medication Trade Family" />
    <status value="active" />
    <date value="2021-09-10" />
    <publisher value="HL7 UK" />
    <contact>
        <name value="HL7 UK" />
        <telecom>
            <system value="email" />
            <value value="secretariat@hl7.org.uk" />
            <use value="work" />
            <rank value="1" />
        </telecom>
    </contact>
    <contact>
        <name value="NHS Digital" />
        <telecom>
            <system value="email" />
            <value value="interoperabilityteam@nhs.net" />
            <use value="work" />
            <rank value="2" />
        </telecom>
    </contact>
    <description value="This Extension is used to identify a Trade Family or brand associated with a Medication, in particular a Virtual Therapeutic Moiety (VTM)." />
    <purpose value="This Extension extends the Medication resource to allow the exchange of data to indicate a Trade Family or brand associated with a medication." />
    <copyright value="Copyright &#169; 2021+ HL7 UK Licensed under the Apache License, Version 2.0 (the &quot;License&quot;); you may not use this file except in compliance with the License. You may obtain a copy of the License at  http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an &quot;AS IS&quot; BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. HL7&#174; FHIR&#174; standard Copyright &#169; 2011+ HL7 The HL7&#174; FHIR&#174; standard is used under the FHIR license. You may obtain a copy of the FHIR license at  https://www.hl7.org/fhir/license.html." />
    <fhirVersion value="4.0.1" />
    <mapping>
        <identity value="rim" />
        <uri value="http://hl7.org/v3" />
        <name value="RIM Mapping" />
    </mapping>
    <kind value="complex-type" />
    <abstract value="false" />
    <context>
        <type value="element" />
        <expression value="Medication" />
    </context>
    <type value="Extension" />
    <baseDefinition value="http://hl7.org/fhir/StructureDefinition/Extension" />
    <derivation value="constraint" />
    <differential>
        <element id="Extension">
            <path value="Extension" />
            <short value="An extension used to identify a Trade Family or brand associated with a Medication, in particular a Virtual Therapeutic Moiety (VTM)." />
            <definition value="An extension used to identify a Trade Family or brand associated with a Medication, in particular a Virtual Therapeutic Moiety (VTM).." />
            <max value="1" />
        </element>
        <element id="Extension.url">
            <path value="Extension.url" />
            <fixedUri value="https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-MedicationTradeFamily" />
        </element>
        <element id="Extension.value[x]">
            <path value="Extension.value[x]" />
            <short value="A code from the SNOMED Clinical Terminology UK coding system to record a Trade Family associated with a Medication" />
            <definition value="A code from the SNOMED Clinical Terminology UK coding system to record a Trade Family associated with a Medication." />
            <min value="1" />
            <type>
                <code value="CodeableConcept" />
            </type>
            <binding>
                <strength value="extensible" />
                <valueSet value="https://fhir.hl7.org.uk/ValueSet/UKCore-MedicationTradeFamily" />
            </binding>
        </element>
    </differential>
</StructureDefinition>

JSON View

{
    "resourceType": "StructureDefinition",
    "id": "Extension-UKCore-MedicationTradeFamily",
    "url": "https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-MedicationTradeFamily",
    "version": "1.0.0",
    "name": "ExtensionUKCoreMedicationTradeFamily",
    "title": "Extension UK Core Medication Trade Family",
    "status": "active",
    "date": "2021-09-10",
    "publisher": "HL7 UK",
    "contact":  [
        {
            "name": "HL7 UK",
            "telecom":  [
                {
                    "system": "email",
                    "value": "secretariat@hl7.org.uk",
                    "use": "work",
                    "rank": 1
                }
            ]
        },
        {
            "name": "NHS Digital",
            "telecom":  [
                {
                    "system": "email",
                    "value": "interoperabilityteam@nhs.net",
                    "use": "work",
                    "rank": 2
                }
            ]
        }
    ],
    "description": "This Extension is used to identify a Trade Family or brand associated with a Medication, in particular a Virtual Therapeutic Moiety (VTM).",
    "purpose": "This Extension extends the Medication resource to allow the exchange of data to indicate a Trade Family or brand associated with a medication.",
    "copyright": "Copyright © 2021+ HL7 UK Licensed under the Apache License, Version 2.0 (the \"License\"); you may not use this file except in compliance with the License. You may obtain a copy of the License at  http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an \"AS IS\" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. HL7® FHIR® standard Copyright © 2011+ HL7 The HL7® FHIR® standard is used under the FHIR license. You may obtain a copy of the FHIR license at  https://www.hl7.org/fhir/license.html.",
    "fhirVersion": "4.0.1",
    "mapping":  [
        {
            "identity": "rim",
            "uri": "http://hl7.org/v3",
            "name": "RIM Mapping"
        }
    ],
    "kind": "complex-type",
    "abstract": false,
    "context":  [
        {
            "type": "element",
            "expression": "Medication"
        }
    ],
    "type": "Extension",
    "baseDefinition": "http://hl7.org/fhir/StructureDefinition/Extension",
    "derivation": "constraint",
    "differential": {
        "element":  [
            {
                "id": "Extension",
                "path": "Extension",
                "short": "An extension used to identify a Trade Family or brand associated with a Medication, in particular a Virtual Therapeutic Moiety (VTM).",
                "definition": "An extension used to identify a Trade Family or brand associated with a Medication, in particular a Virtual Therapeutic Moiety (VTM)..",
                "max": "1"
            },
            {
                "id": "Extension.url",
                "path": "Extension.url",
                "fixedUri": "https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-MedicationTradeFamily"
            },
            {
                "id": "Extension.value[x]",
                "path": "Extension.value[x]",
                "short": "A code from the SNOMED Clinical Terminology UK coding system to record a Trade Family associated with a Medication",
                "definition": "A code from the SNOMED Clinical Terminology UK coding system to record a Trade Family associated with a Medication.",
                "min": 1,
                "type":  [
                    {
                        "code": "CodeableConcept"
                    }
                ],
                "binding": {
                    "strength": "extensible",
                    "valueSet": "https://fhir.hl7.org.uk/ValueSet/UKCore-MedicationTradeFamily"
                }
            }
        ]
    }
}

Examples

Example UKCore-Medication-Extension-MedicationTradeFamily

StructureDefinition Extension-UKCore-NHSNumberVerificationStatus

Information describing the verification and tracing status of a patient's NHS Number.

Purpose

This extension extends the identifier element of the Patient resource to support the exchange of information on the verification and tracing status of a Patient's NHS Number, as a Codeable Concept. This is currently not supported by the FHIR standard.

Context of Use
Use on element	Patient.identifier

Snapshot View

Extension	I		Extension	Element Id Extension Short description NHS number verification status Definition The verification/tracing status of the NHS number. Data Type Extension Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
url		1..1	System.StringFixed Value	Element Id Extension.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data Type System.String Fixed Value https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-NHSNumberVerificationStatus Mappings rim:N/A
value[x]		1..1	Binding	Element Id Extension.value[x] Short description Verification status of the NHS number Definition Verification status of the NHS number. Binding UKCoreNHSNumberVerificationStatus (required) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
valueCodeableConcept			CodeableConcept	Data Type CodeableConcept

Differential View

Extension	I		Extension	Element Id Extension Short description NHS number verification status Definition The verification/tracing status of the NHS number. Data Type Extension Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
url		1..1	System.StringFixed Value	Element Id Extension.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data Type System.String Fixed Value https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-NHSNumberVerificationStatus Mappings rim:N/A
value[x]		1..1	Binding	Element Id Extension.value[x] Short description Verification status of the NHS number Definition Verification status of the NHS number. Binding UKCoreNHSNumberVerificationStatus (required) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
valueCodeableConcept			CodeableConcept	Data Type CodeableConcept

Hybrid View

Extension	I		Extension	Element Id Extension Short description NHS number verification status Definition The verification/tracing status of the NHS number. Data Type Extension Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
url		1..1	System.StringFixed Value	Element Id Extension.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data Type System.String Fixed Value https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-NHSNumberVerificationStatus Mappings rim:N/A
value[x]		1..1	Binding	Element Id Extension.value[x] Short description Verification status of the NHS number Definition Verification status of the NHS number. Binding UKCoreNHSNumberVerificationStatus (required) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
valueCodeableConcept			CodeableConcept	Data Type CodeableConcept

Table View

Extension		..
Extension.url		..
Extension.value[x]	CodeableConcept	1..

XML View

<StructureDefinition xmlns="http://hl7.org/fhir">
    <id value="Extension-UKCore-NHSNumberVerificationStatus" />
    <url value="https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-NHSNumberVerificationStatus" />
    <version value="2.1.0" />
    <name value="ExtensionUKCoreNHSNumberVerificationStatus" />
    <title value="Extension UK Core NHS Number Verification Status" />
    <status value="active" />
    <date value="2021-09-10" />
    <publisher value="HL7 UK" />
    <contact>
        <name value="HL7 UK" />
        <telecom>
            <system value="email" />
            <value value="secretariat@hl7.org.uk" />
            <use value="work" />
            <rank value="1" />
        </telecom>
    </contact>
    <contact>
        <name value="NHS Digital" />
        <telecom>
            <system value="email" />
            <value value="interoperabilityteam@nhs.net" />
            <use value="work" />
            <rank value="2" />
        </telecom>
    </contact>
    <description value="Information describing the verification and tracing status of a patient&#39;s NHS Number." />
    <purpose value="This extension extends the identifier element of the Patient resource to support the exchange of information on the verification of a Patient&#39;s NHS number. This is currently not supported by the FHIR standard." />
    <copyright value="Copyright &#169; 2021+ HL7 UK Licensed under the Apache License, Version 2.0 (the &quot;License&quot;); you may not use this file except in compliance with the License. You may obtain a copy of the License at  http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an &quot;AS IS&quot; BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. HL7&#174; FHIR&#174; standard Copyright &#169; 2011+ HL7 The HL7&#174; FHIR&#174; standard is used under the FHIR license. You may obtain a copy of the FHIR license at  https://www.hl7.org/fhir/license.html." />
    <fhirVersion value="4.0.1" />
    <mapping>
        <identity value="rim" />
        <uri value="http://hl7.org/v3" />
        <name value="RIM Mapping" />
    </mapping>
    <kind value="complex-type" />
    <abstract value="false" />
    <context>
        <type value="element" />
        <expression value="Patient.identifier" />
    </context>
    <type value="Extension" />
    <baseDefinition value="http://hl7.org/fhir/StructureDefinition/Extension" />
    <derivation value="constraint" />
    <differential>
        <element id="Extension">
            <path value="Extension" />
            <short value="NHS number verification status" />
            <definition value="The verification/tracing status of the NHS number." />
        </element>
        <element id="Extension.url">
            <path value="Extension.url" />
            <fixedUri value="https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-NHSNumberVerificationStatus" />
        </element>
        <element id="Extension.value[x]">
            <path value="Extension.value[x]" />
            <short value="Verification status of the NHS number" />
            <definition value="Verification status of the NHS number." />
            <min value="1" />
            <type>
                <code value="CodeableConcept" />
            </type>
            <binding>
                <strength value="required" />
                <valueSet value="https://fhir.hl7.org.uk/ValueSet/UKCore-NHSNumberVerificationStatus" />
            </binding>
        </element>
    </differential>
</StructureDefinition>

JSON View

{
    "resourceType": "StructureDefinition",
    "id": "Extension-UKCore-NHSNumberVerificationStatus",
    "url": "https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-NHSNumberVerificationStatus",
    "version": "2.1.0",
    "name": "ExtensionUKCoreNHSNumberVerificationStatus",
    "title": "Extension UK Core NHS Number Verification Status",
    "status": "active",
    "date": "2021-09-10",
    "publisher": "HL7 UK",
    "contact":  [
        {
            "name": "HL7 UK",
            "telecom":  [
                {
                    "system": "email",
                    "value": "secretariat@hl7.org.uk",
                    "use": "work",
                    "rank": 1
                }
            ]
        },
        {
            "name": "NHS Digital",
            "telecom":  [
                {
                    "system": "email",
                    "value": "interoperabilityteam@nhs.net",
                    "use": "work",
                    "rank": 2
                }
            ]
        }
    ],
    "description": "Information describing the verification and tracing status of a patient's NHS Number.",
    "purpose": "This extension extends the identifier element of the Patient resource to support the exchange of information on the verification of a Patient's NHS number. This is currently not supported by the FHIR standard.",
    "copyright": "Copyright © 2021+ HL7 UK Licensed under the Apache License, Version 2.0 (the \"License\"); you may not use this file except in compliance with the License. You may obtain a copy of the License at  http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an \"AS IS\" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. HL7® FHIR® standard Copyright © 2011+ HL7 The HL7® FHIR® standard is used under the FHIR license. You may obtain a copy of the FHIR license at  https://www.hl7.org/fhir/license.html.",
    "fhirVersion": "4.0.1",
    "mapping":  [
        {
            "identity": "rim",
            "uri": "http://hl7.org/v3",
            "name": "RIM Mapping"
        }
    ],
    "kind": "complex-type",
    "abstract": false,
    "context":  [
        {
            "type": "element",
            "expression": "Patient.identifier"
        }
    ],
    "type": "Extension",
    "baseDefinition": "http://hl7.org/fhir/StructureDefinition/Extension",
    "derivation": "constraint",
    "differential": {
        "element":  [
            {
                "id": "Extension",
                "path": "Extension",
                "short": "NHS number verification status",
                "definition": "The verification/tracing status of the NHS number."
            },
            {
                "id": "Extension.url",
                "path": "Extension.url",
                "fixedUri": "https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-NHSNumberVerificationStatus"
            },
            {
                "id": "Extension.value[x]",
                "path": "Extension.value[x]",
                "short": "Verification status of the NHS number",
                "definition": "Verification status of the NHS number.",
                "min": 1,
                "type":  [
                    {
                        "code": "CodeableConcept"
                    }
                ],
                "binding": {
                    "strength": "required",
                    "valueSet": "https://fhir.hl7.org.uk/ValueSet/UKCore-NHSNumberVerificationStatus"
                }
            }
        ]
    }
}

Examples

Example UKCore-Patient-Extension-NHSNumberVerificationStatus

StructureDefinition Extension-UKCore-OtherContactSystem

Information about other contact methods which could be used in addition to those listed in ContactPoint.system.

Purpose

This extension extends the ContactPoint datatype to support the exchange of other contact system information, which is currently not supported by the FHIR standard.

Context of Use
Use on element	ContactPoint.system

Snapshot View

Extension	I		Extension	Element Id Extension Short description Other contact system Definition Other contact system value which extends the system element in the ContactPoint datatype. Data Type Extension Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
url		1..1	System.StringFixed Value	Element Id Extension.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data Type System.String Fixed Value https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-OtherContactSystem Mappings rim:N/A
value[x]		1..1	Binding	Element Id Extension.value[x] Short description Value for other contact system Definition A value to extend the system element in the ContactPoint datatype. Binding UKCoreOtherContactSystem (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
valueCoding			Coding	Data Type Coding

Differential View

Extension	I		Extension	Element Id Extension Short description Other contact system Definition Other contact system value which extends the system element in the ContactPoint datatype. Data Type Extension Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
url		1..1	System.StringFixed Value	Element Id Extension.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data Type System.String Fixed Value https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-OtherContactSystem Mappings rim:N/A
value[x]		1..1	Binding	Element Id Extension.value[x] Short description Value for other contact system Definition A value to extend the system element in the ContactPoint datatype. Binding UKCoreOtherContactSystem (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
valueCoding			Coding	Data Type Coding

Hybrid View

Extension	I		Extension	Element Id Extension Short description Other contact system Definition Other contact system value which extends the system element in the ContactPoint datatype. Data Type Extension Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
url		1..1	System.StringFixed Value	Element Id Extension.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data Type System.String Fixed Value https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-OtherContactSystem Mappings rim:N/A
value[x]		1..1	Binding	Element Id Extension.value[x] Short description Value for other contact system Definition A value to extend the system element in the ContactPoint datatype. Binding UKCoreOtherContactSystem (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
valueCoding			Coding	Data Type Coding

Table View

Extension		..1
Extension.url		..
Extension.value[x]	Coding	1..

XML View

<StructureDefinition xmlns="http://hl7.org/fhir">
    <id value="Extension-UKCore-OtherContactSystem" />
    <url value="https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-OtherContactSystem" />
    <version value="2.1.0" />
    <name value="ExtensionUKCoreOtherContactSystem" />
    <title value="Extension UK Core Other Contact System" />
    <status value="active" />
    <date value="2021-09-10" />
    <publisher value="HL7 UK" />
    <contact>
        <name value="HL7 UK" />
        <telecom>
            <system value="email" />
            <value value="secretariat@hl7.org.uk" />
            <use value="work" />
            <rank value="1" />
        </telecom>
    </contact>
    <contact>
        <name value="NHS Digital" />
        <telecom>
            <system value="email" />
            <value value="interoperabilityteam@nhs.net" />
            <use value="work" />
            <rank value="2" />
        </telecom>
    </contact>
    <description value="Information about other contact methods." />
    <purpose value="This extension extends the ContactPoint datatype to support the exchange of other contact system information, which is currently not supported by the FHIR standard." />
    <copyright value="Copyright &#169; 2021+ HL7 UK Licensed under the Apache License, Version 2.0 (the &quot;License&quot;); you may not use this file except in compliance with the License. You may obtain a copy of the License at  http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an &quot;AS IS&quot; BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. HL7&#174; FHIR&#174; standard Copyright &#169; 2011+ HL7 The HL7&#174; FHIR&#174; standard is used under the FHIR license. You may obtain a copy of the FHIR license at  https://www.hl7.org/fhir/license.html." />
    <fhirVersion value="4.0.1" />
    <mapping>
        <identity value="rim" />
        <uri value="http://hl7.org/v3" />
        <name value="RIM Mapping" />
    </mapping>
    <kind value="complex-type" />
    <abstract value="false" />
    <context>
        <type value="element" />
        <expression value="ContactPoint.system" />
    </context>
    <type value="Extension" />
    <baseDefinition value="http://hl7.org/fhir/StructureDefinition/Extension" />
    <derivation value="constraint" />
    <differential>
        <element id="Extension">
            <path value="Extension" />
            <short value="Other contact system" />
            <definition value="Other contact system value which extends the system element in the ContactPoint datatype." />
            <max value="1" />
        </element>
        <element id="Extension.url">
            <path value="Extension.url" />
            <fixedUri value="https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-OtherContactSystem" />
        </element>
        <element id="Extension.value[x]">
            <path value="Extension.value[x]" />
            <short value="Value for other contact system" />
            <definition value="A value to extend the system element in the ContactPoint datatype." />
            <min value="1" />
            <type>
                <code value="Coding" />
            </type>
            <binding>
                <strength value="extensible" />
                <valueSet value="https://fhir.hl7.org.uk/ValueSet/UKCore-OtherContactSystem" />
            </binding>
        </element>
    </differential>
</StructureDefinition>

JSON View

{
    "resourceType": "StructureDefinition",
    "id": "Extension-UKCore-OtherContactSystem",
    "url": "https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-OtherContactSystem",
    "version": "2.1.0",
    "name": "ExtensionUKCoreOtherContactSystem",
    "title": "Extension UK Core Other Contact System",
    "status": "active",
    "date": "2021-09-10",
    "publisher": "HL7 UK",
    "contact":  [
        {
            "name": "HL7 UK",
            "telecom":  [
                {
                    "system": "email",
                    "value": "secretariat@hl7.org.uk",
                    "use": "work",
                    "rank": 1
                }
            ]
        },
        {
            "name": "NHS Digital",
            "telecom":  [
                {
                    "system": "email",
                    "value": "interoperabilityteam@nhs.net",
                    "use": "work",
                    "rank": 2
                }
            ]
        }
    ],
    "description": "Information about other contact methods.",
    "purpose": "This extension extends the ContactPoint datatype to support the exchange of other contact system information, which is currently not supported by the FHIR standard.",
    "copyright": "Copyright © 2021+ HL7 UK Licensed under the Apache License, Version 2.0 (the \"License\"); you may not use this file except in compliance with the License. You may obtain a copy of the License at  http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an \"AS IS\" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. HL7® FHIR® standard Copyright © 2011+ HL7 The HL7® FHIR® standard is used under the FHIR license. You may obtain a copy of the FHIR license at  https://www.hl7.org/fhir/license.html.",
    "fhirVersion": "4.0.1",
    "mapping":  [
        {
            "identity": "rim",
            "uri": "http://hl7.org/v3",
            "name": "RIM Mapping"
        }
    ],
    "kind": "complex-type",
    "abstract": false,
    "context":  [
        {
            "type": "element",
            "expression": "ContactPoint.system"
        }
    ],
    "type": "Extension",
    "baseDefinition": "http://hl7.org/fhir/StructureDefinition/Extension",
    "derivation": "constraint",
    "differential": {
        "element":  [
            {
                "id": "Extension",
                "path": "Extension",
                "short": "Other contact system",
                "definition": "Other contact system value which extends the system element in the ContactPoint datatype.",
                "max": "1"
            },
            {
                "id": "Extension.url",
                "path": "Extension.url",
                "fixedUri": "https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-OtherContactSystem"
            },
            {
                "id": "Extension.value[x]",
                "path": "Extension.value[x]",
                "short": "Value for other contact system",
                "definition": "A value to extend the system element in the ContactPoint datatype.",
                "min": 1,
                "type":  [
                    {
                        "code": "Coding"
                    }
                ],
                "binding": {
                    "strength": "extensible",
                    "valueSet": "https://fhir.hl7.org.uk/ValueSet/UKCore-OtherContactSystem"
                }
            }
        ]
    }
}

Examples

Richard Smith - An example to illustrate other contact methods for a patient.
Example UKCore-Patient-Extension-OtherContactSystem

StructureDefinition Extension-UKCore-ParentPresent

This describes whether a parent was present at the immunisation of a child.

Purpose

This extension extends the Immunization resource to support the exchange of data to indicate whether the child's parent was present at the time of the immunisation, which is currently not supported by the FHIR standard.

Context of Use
Use on element	Immunization

Snapshot View

Extension	I		Extension	Element Id Extension Short description Was a parent of the patient present at an immunisation? Definition Was a parent of the patient present at an immunisation? Data Type Extension Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
url		1..1	System.StringFixed Value	Element Id Extension.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data Type System.String Fixed Value https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-ParentPresent Mappings rim:N/A
value[x]		1..1		Element Id Extension.value[x] Short description Was a parent of the patient present at an immunisation? Definition Was a parent of the patient present at an immunisation? Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
valueBoolean			boolean	Data Type boolean

Differential View

Extension	I		Extension	Element Id Extension Short description Was a parent of the patient present at an immunisation? Definition Was a parent of the patient present at an immunisation? Data Type Extension Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
url		1..1	System.StringFixed Value	Element Id Extension.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data Type System.String Fixed Value https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-ParentPresent Mappings rim:N/A
value[x]		1..1		Element Id Extension.value[x] Short description Was a parent of the patient present at an immunisation? Definition Was a parent of the patient present at an immunisation? Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
valueBoolean			boolean	Data Type boolean

Hybrid View

Extension	I		Extension	Element Id Extension Short description Was a parent of the patient present at an immunisation? Definition Was a parent of the patient present at an immunisation? Data Type Extension Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
url		1..1	System.StringFixed Value	Element Id Extension.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data Type System.String Fixed Value https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-ParentPresent Mappings rim:N/A
value[x]		1..1		Element Id Extension.value[x] Short description Was a parent of the patient present at an immunisation? Definition Was a parent of the patient present at an immunisation? Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
valueBoolean			boolean	Data Type boolean

Table View

Extension		..1
Extension.url		..
Extension.value[x]	boolean	1..

XML View

<StructureDefinition xmlns="http://hl7.org/fhir">
    <id value="Extension-UKCore-ParentPresent" />
    <url value="https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-ParentPresent" />
    <version value="2.2.0" />
    <name value="ExtensionUKCoreParentPresent" />
    <title value="Extension UK Core Parent Present" />
    <status value="active" />
    <date value="2022-08-26" />
    <publisher value="HL7 UK" />
    <contact>
        <name value="HL7 UK" />
        <telecom>
            <system value="email" />
            <value value="secretariat@hl7.org.uk" />
            <use value="work" />
            <rank value="1" />
        </telecom>
    </contact>
    <contact>
        <name value="NHS Digital" />
        <telecom>
            <system value="email" />
            <value value="interoperabilityteam@nhs.net" />
            <use value="work" />
            <rank value="2" />
        </telecom>
    </contact>
    <description value="This describes whether a parent was present at the immunisation of a child." />
    <purpose value="This extension extends the Immunization resource to support the exchange of data to indicate whether the child&#39;s parent was present at the time of the immunisation, which is currently not supported by the FHIR standard." />
    <copyright value="Copyright &#169; 2021+ HL7 UK Licensed under the Apache License, Version 2.0 (the &quot;License&quot;); you may not use this file except in compliance with the License. You may obtain a copy of the License at  http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an &quot;AS IS&quot; BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. HL7&#174; FHIR&#174; standard Copyright &#169; 2011+ HL7 The HL7&#174; FHIR&#174; standard is used under the FHIR license. You may obtain a copy of the FHIR license at  https://www.hl7.org/fhir/license.html." />
    <fhirVersion value="4.0.1" />
    <mapping>
        <identity value="rim" />
        <uri value="http://hl7.org/v3" />
        <name value="RIM Mapping" />
    </mapping>
    <kind value="complex-type" />
    <abstract value="false" />
    <context>
        <type value="element" />
        <expression value="Immunization" />
    </context>
    <type value="Extension" />
    <baseDefinition value="http://hl7.org/fhir/StructureDefinition/Extension" />
    <derivation value="constraint" />
    <differential>
        <element id="Extension">
            <path value="Extension" />
            <short value="Was a parent of the patient present at an immunisation?" />
            <definition value="Was a parent of the patient present at an immunisation?" />
            <max value="1" />
        </element>
        <element id="Extension.url">
            <path value="Extension.url" />
            <fixedUri value="https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-ParentPresent" />
        </element>
        <element id="Extension.value[x]">
            <path value="Extension.value[x]" />
            <short value="Was a parent of the patient present at an immunisation?" />
            <definition value="Was a parent of the patient present at an immunisation?" />
            <min value="1" />
            <type>
                <code value="boolean" />
            </type>
        </element>
    </differential>
</StructureDefinition>

JSON View

{
    "resourceType": "StructureDefinition",
    "id": "Extension-UKCore-ParentPresent",
    "url": "https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-ParentPresent",
    "version": "2.2.0",
    "name": "ExtensionUKCoreParentPresent",
    "title": "Extension UK Core Parent Present",
    "status": "active",
    "date": "2022-08-26",
    "publisher": "HL7 UK",
    "contact":  [
        {
            "name": "HL7 UK",
            "telecom":  [
                {
                    "system": "email",
                    "value": "secretariat@hl7.org.uk",
                    "use": "work",
                    "rank": 1
                }
            ]
        },
        {
            "name": "NHS Digital",
            "telecom":  [
                {
                    "system": "email",
                    "value": "interoperabilityteam@nhs.net",
                    "use": "work",
                    "rank": 2
                }
            ]
        }
    ],
    "description": "This describes whether a parent was present at the immunisation of a child.",
    "purpose": "This extension extends the Immunization resource to support the exchange of data to indicate whether the child's parent was present at the time of the immunisation, which is currently not supported by the FHIR standard.",
    "copyright": "Copyright © 2021+ HL7 UK Licensed under the Apache License, Version 2.0 (the \"License\"); you may not use this file except in compliance with the License. You may obtain a copy of the License at  http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an \"AS IS\" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. HL7® FHIR® standard Copyright © 2011+ HL7 The HL7® FHIR® standard is used under the FHIR license. You may obtain a copy of the FHIR license at  https://www.hl7.org/fhir/license.html.",
    "fhirVersion": "4.0.1",
    "mapping":  [
        {
            "identity": "rim",
            "uri": "http://hl7.org/v3",
            "name": "RIM Mapping"
        }
    ],
    "kind": "complex-type",
    "abstract": false,
    "context":  [
        {
            "type": "element",
            "expression": "Immunization"
        }
    ],
    "type": "Extension",
    "baseDefinition": "http://hl7.org/fhir/StructureDefinition/Extension",
    "derivation": "constraint",
    "differential": {
        "element":  [
            {
                "id": "Extension",
                "path": "Extension",
                "short": "Was a parent of the patient present at an immunisation?",
                "definition": "Was a parent of the patient present at an immunisation?",
                "max": "1"
            },
            {
                "id": "Extension.url",
                "path": "Extension.url",
                "fixedUri": "https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-ParentPresent"
            },
            {
                "id": "Extension.value[x]",
                "path": "Extension.value[x]",
                "short": "Was a parent of the patient present at an immunisation?",
                "definition": "Was a parent of the patient present at an immunisation?",
                "min": 1,
                "type":  [
                    {
                        "code": "boolean"
                    }
                ]
            }
        ]
    }
}

Examples

Example UKCore-Immunization-Extension-ParentPresent

StructureDefinition Extension-UKCore-PharmacistVerifiedIndicator

This Extension is used to indicate whether a pharmacist verified a medication.

Purpose

This Extension extends the MedicationStatement resource to allow the exchange of data to indicate whether a pharmacist verified the medication specified within or referenced by the medication statement, which is currently not supported by the FHIR standard.

Context of Use
Use on element	MedicationStatement

Snapshot View

Extension	I		Extension	Element Id Extension Short description Indicates whether a pharmacist verified a medication. Definition This extension is used to indicate whether a pharmacist verified a medication. Data Type Extension Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
url		1..1	System.StringFixed Value	Element Id Extension.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data Type System.String Fixed Value https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-PharmacistVerifiedIndicator Mappings rim:N/A
value[x]		1..1		Element Id Extension.value[x] Short description Pharmacist Verified Indicator. Definition Boolean element representing the Pharmacist Verified Indicator. Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
valueBoolean			boolean	Data Type boolean

Differential View

Extension	I		Extension	Element Id Extension Short description Indicates whether a pharmacist verified a medication. Definition This extension is used to indicate whether a pharmacist verified a medication. Data Type Extension Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
url		1..1	System.StringFixed Value	Element Id Extension.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data Type System.String Fixed Value https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-PharmacistVerifiedIndicator Mappings rim:N/A
value[x]		1..1		Element Id Extension.value[x] Short description Pharmacist Verified Indicator. Definition Boolean element representing the Pharmacist Verified Indicator. Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
valueBoolean			boolean	Data Type boolean

Hybrid View

Extension	I		Extension	Element Id Extension Short description Indicates whether a pharmacist verified a medication. Definition This extension is used to indicate whether a pharmacist verified a medication. Data Type Extension Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
url		1..1	System.StringFixed Value	Element Id Extension.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data Type System.String Fixed Value https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-PharmacistVerifiedIndicator Mappings rim:N/A
value[x]		1..1		Element Id Extension.value[x] Short description Pharmacist Verified Indicator. Definition Boolean element representing the Pharmacist Verified Indicator. Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
valueBoolean			boolean	Data Type boolean

Table View

Extension		..1
Extension.url		..
Extension.value[x]	boolean	1..

XML View

<StructureDefinition xmlns="http://hl7.org/fhir">
    <id value="Extension-UKCore-PharmacistVerifiedIndicator" />
    <url value="https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-PharmacistVerifiedIndicator" />
    <version value="1.0.0" />
    <name value="ExtensionUKCorePharmacistVerifiedIndicator" />
    <title value="Extension UK Core Pharmacist Verified Indicator" />
    <status value="active" />
    <date value="2021-09-10" />
    <publisher value="HL7 UK" />
    <contact>
        <name value="HL7 UK" />
        <telecom>
            <system value="email" />
            <value value="secretariat@hl7.org.uk" />
            <use value="work" />
            <rank value="1" />
        </telecom>
    </contact>
    <contact>
        <name value="NHS Digital" />
        <telecom>
            <system value="email" />
            <value value="interoperabilityteam@nhs.net" />
            <use value="work" />
            <rank value="2" />
        </telecom>
    </contact>
    <description value="This Extension is used to indicate whether a pharmacist verified a medication." />
    <purpose value="This Extension extends the MedicationStatement resource to allow the exchange of data to indicate whether a pharmacist verified the medication specified within or referenced by the medication statement, which is currently not supported by the FHIR standard." />
    <copyright value="Copyright &#169; 2021+ HL7 UK Licensed under the Apache License, Version 2.0 (the &quot;License&quot;); you may not use this file except in compliance with the License. You may obtain a copy of the License at  http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an &quot;AS IS&quot; BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. HL7&#174; FHIR&#174; standard Copyright &#169; 2011+ HL7 The HL7&#174; FHIR&#174; standard is used under the FHIR license. You may obtain a copy of the FHIR license at  https://www.hl7.org/fhir/license.html." />
    <fhirVersion value="4.0.1" />
    <mapping>
        <identity value="rim" />
        <uri value="http://hl7.org/v3" />
        <name value="RIM Mapping" />
    </mapping>
    <kind value="complex-type" />
    <abstract value="false" />
    <context>
        <type value="element" />
        <expression value="MedicationStatement" />
    </context>
    <type value="Extension" />
    <baseDefinition value="http://hl7.org/fhir/StructureDefinition/Extension" />
    <derivation value="constraint" />
    <differential>
        <element id="Extension">
            <path value="Extension" />
            <short value="Indicates whether a pharmacist verified a medication." />
            <definition value="This extension is used to indicate whether a pharmacist verified a medication." />
            <max value="1" />
        </element>
        <element id="Extension.url">
            <path value="Extension.url" />
            <fixedUri value="https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-PharmacistVerifiedIndicator" />
        </element>
        <element id="Extension.value[x]">
            <path value="Extension.value[x]" />
            <short value="Pharmacist Verified Indicator." />
            <definition value="Boolean element representing the Pharmacist Verified Indicator." />
            <min value="1" />
            <type>
                <code value="boolean" />
            </type>
        </element>
    </differential>
</StructureDefinition>

JSON View

{
    "resourceType": "StructureDefinition",
    "id": "Extension-UKCore-PharmacistVerifiedIndicator",
    "url": "https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-PharmacistVerifiedIndicator",
    "version": "1.0.0",
    "name": "ExtensionUKCorePharmacistVerifiedIndicator",
    "title": "Extension UK Core Pharmacist Verified Indicator",
    "status": "active",
    "date": "2021-09-10",
    "publisher": "HL7 UK",
    "contact":  [
        {
            "name": "HL7 UK",
            "telecom":  [
                {
                    "system": "email",
                    "value": "secretariat@hl7.org.uk",
                    "use": "work",
                    "rank": 1
                }
            ]
        },
        {
            "name": "NHS Digital",
            "telecom":  [
                {
                    "system": "email",
                    "value": "interoperabilityteam@nhs.net",
                    "use": "work",
                    "rank": 2
                }
            ]
        }
    ],
    "description": "This Extension is used to indicate whether a pharmacist verified a medication.",
    "purpose": "This Extension extends the MedicationStatement resource to allow the exchange of data to indicate whether a pharmacist verified the medication specified within or referenced by the medication statement, which is currently not supported by the FHIR standard.",
    "copyright": "Copyright © 2021+ HL7 UK Licensed under the Apache License, Version 2.0 (the \"License\"); you may not use this file except in compliance with the License. You may obtain a copy of the License at  http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an \"AS IS\" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. HL7® FHIR® standard Copyright © 2011+ HL7 The HL7® FHIR® standard is used under the FHIR license. You may obtain a copy of the FHIR license at  https://www.hl7.org/fhir/license.html.",
    "fhirVersion": "4.0.1",
    "mapping":  [
        {
            "identity": "rim",
            "uri": "http://hl7.org/v3",
            "name": "RIM Mapping"
        }
    ],
    "kind": "complex-type",
    "abstract": false,
    "context":  [
        {
            "type": "element",
            "expression": "MedicationStatement"
        }
    ],
    "type": "Extension",
    "baseDefinition": "http://hl7.org/fhir/StructureDefinition/Extension",
    "derivation": "constraint",
    "differential": {
        "element":  [
            {
                "id": "Extension",
                "path": "Extension",
                "short": "Indicates whether a pharmacist verified a medication.",
                "definition": "This extension is used to indicate whether a pharmacist verified a medication.",
                "max": "1"
            },
            {
                "id": "Extension.url",
                "path": "Extension.url",
                "fixedUri": "https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-PharmacistVerifiedIndicator"
            },
            {
                "id": "Extension.value[x]",
                "path": "Extension.value[x]",
                "short": "Pharmacist Verified Indicator.",
                "definition": "Boolean element representing the Pharmacist Verified Indicator.",
                "min": 1,
                "type":  [
                    {
                        "code": "boolean"
                    }
                ]
            }
        ]
    }
}

Examples

Example UKCore-MedicationRequest-Extension-PharmacistVerifiedIndicator

StructureDefinition Extension-UKCore-ResidentialStatus

Information about a patient's residential status.

Purpose

This extension extends the Patient resource to support the exchange of information about a patient's residential status, which is currently not supported by the FHIR standard.

Context of Use
Use on element	Patient

Snapshot View

Extension	I		Extension	Element Id Extension Short description The residential status of the patient Definition The residential status of the patient. For example if this patient is a UK resident. Data Type Extension Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
url		1..1	System.StringFixed Value	Element Id Extension.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data Type System.String Fixed Value https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-ResidentialStatus Mappings rim:N/A
value[x]		1..1	Binding	Element Id Extension.value[x] Short description The residential status of the patient Definition The residential status of the patient. For example if this patient is a UK resident. Binding UKCoreResidentialStatus (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
valueCodeableConcept			CodeableConcept	Data Type CodeableConcept

Differential View

Extension	I		Extension	Element Id Extension Short description The residential status of the patient Definition The residential status of the patient. For example if this patient is a UK resident. Data Type Extension Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
url		1..1	System.StringFixed Value	Element Id Extension.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data Type System.String Fixed Value https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-ResidentialStatus Mappings rim:N/A
value[x]		1..1	Binding	Element Id Extension.value[x] Short description The residential status of the patient Definition The residential status of the patient. For example if this patient is a UK resident. Binding UKCoreResidentialStatus (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
valueCodeableConcept			CodeableConcept	Data Type CodeableConcept

Hybrid View

Extension	I		Extension	Element Id Extension Short description The residential status of the patient Definition The residential status of the patient. For example if this patient is a UK resident. Data Type Extension Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
url		1..1	System.StringFixed Value	Element Id Extension.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data Type System.String Fixed Value https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-ResidentialStatus Mappings rim:N/A
value[x]		1..1	Binding	Element Id Extension.value[x] Short description The residential status of the patient Definition The residential status of the patient. For example if this patient is a UK resident. Binding UKCoreResidentialStatus (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
valueCodeableConcept			CodeableConcept	Data Type CodeableConcept

Table View

Extension		..1
Extension.url		..
Extension.value[x]	CodeableConcept	1..

XML View

<StructureDefinition xmlns="http://hl7.org/fhir">
    <id value="Extension-UKCore-ResidentialStatus" />
    <url value="https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-ResidentialStatus" />
    <version value="2.1.0" />
    <name value="ExtensionUKCoreResidentialStatus" />
    <title value="Extension UK Core Residential Status" />
    <status value="active" />
    <date value="2021-09-10" />
    <publisher value="HL7 UK" />
    <contact>
        <name value="HL7 UK" />
        <telecom>
            <system value="email" />
            <value value="secretariat@hl7.org.uk" />
            <use value="work" />
            <rank value="1" />
        </telecom>
    </contact>
    <contact>
        <name value="NHS Digital" />
        <telecom>
            <system value="email" />
            <value value="interoperabilityteam@nhs.net" />
            <use value="work" />
            <rank value="2" />
        </telecom>
    </contact>
    <description value="Information about a patient&#39;s residential status." />
    <purpose value="This extension extends the Patient resource to support the exchange of information about a patient&#39;s residential status, which is currently not supported by the FHIR standard." />
    <copyright value="Copyright &#169; 2021+ HL7 UK Licensed under the Apache License, Version 2.0 (the &quot;License&quot;); you may not use this file except in compliance with the License. You may obtain a copy of the License at  http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an &quot;AS IS&quot; BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. HL7&#174; FHIR&#174; standard Copyright &#169; 2011+ HL7 The HL7&#174; FHIR&#174; standard is used under the FHIR license. You may obtain a copy of the FHIR license at  https://www.hl7.org/fhir/license.html." />
    <fhirVersion value="4.0.1" />
    <mapping>
        <identity value="rim" />
        <uri value="http://hl7.org/v3" />
        <name value="RIM Mapping" />
    </mapping>
    <kind value="complex-type" />
    <abstract value="false" />
    <context>
        <type value="element" />
        <expression value="Patient" />
    </context>
    <type value="Extension" />
    <baseDefinition value="http://hl7.org/fhir/StructureDefinition/Extension" />
    <derivation value="constraint" />
    <differential>
        <element id="Extension">
            <path value="Extension" />
            <short value="The residential status of the patient" />
            <definition value="The residential status of the patient. For example if this patient is a UK resident." />
            <max value="1" />
        </element>
        <element id="Extension.url">
            <path value="Extension.url" />
            <fixedUri value="https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-ResidentialStatus" />
        </element>
        <element id="Extension.value[x]">
            <path value="Extension.value[x]" />
            <short value="The residential status of the patient" />
            <definition value="The residential status of the patient. For example if this patient is a UK resident." />
            <min value="1" />
            <type>
                <code value="CodeableConcept" />
            </type>
            <binding>
                <strength value="extensible" />
                <valueSet value="https://fhir.hl7.org.uk/ValueSet/UKCore-ResidentialStatus" />
            </binding>
        </element>
    </differential>
</StructureDefinition>

JSON View

{
    "resourceType": "StructureDefinition",
    "id": "Extension-UKCore-ResidentialStatus",
    "url": "https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-ResidentialStatus",
    "version": "2.1.0",
    "name": "ExtensionUKCoreResidentialStatus",
    "title": "Extension UK Core Residential Status",
    "status": "active",
    "date": "2021-09-10",
    "publisher": "HL7 UK",
    "contact":  [
        {
            "name": "HL7 UK",
            "telecom":  [
                {
                    "system": "email",
                    "value": "secretariat@hl7.org.uk",
                    "use": "work",
                    "rank": 1
                }
            ]
        },
        {
            "name": "NHS Digital",
            "telecom":  [
                {
                    "system": "email",
                    "value": "interoperabilityteam@nhs.net",
                    "use": "work",
                    "rank": 2
                }
            ]
        }
    ],
    "description": "Information about a patient's residential status.",
    "purpose": "This extension extends the Patient resource to support the exchange of information about a patient's residential status, which is currently not supported by the FHIR standard.",
    "copyright": "Copyright © 2021+ HL7 UK Licensed under the Apache License, Version 2.0 (the \"License\"); you may not use this file except in compliance with the License. You may obtain a copy of the License at  http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an \"AS IS\" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. HL7® FHIR® standard Copyright © 2011+ HL7 The HL7® FHIR® standard is used under the FHIR license. You may obtain a copy of the FHIR license at  https://www.hl7.org/fhir/license.html.",
    "fhirVersion": "4.0.1",
    "mapping":  [
        {
            "identity": "rim",
            "uri": "http://hl7.org/v3",
            "name": "RIM Mapping"
        }
    ],
    "kind": "complex-type",
    "abstract": false,
    "context":  [
        {
            "type": "element",
            "expression": "Patient"
        }
    ],
    "type": "Extension",
    "baseDefinition": "http://hl7.org/fhir/StructureDefinition/Extension",
    "derivation": "constraint",
    "differential": {
        "element":  [
            {
                "id": "Extension",
                "path": "Extension",
                "short": "The residential status of the patient",
                "definition": "The residential status of the patient. For example if this patient is a UK resident.",
                "max": "1"
            },
            {
                "id": "Extension.url",
                "path": "Extension.url",
                "fixedUri": "https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-ResidentialStatus"
            },
            {
                "id": "Extension.value[x]",
                "path": "Extension.value[x]",
                "short": "The residential status of the patient",
                "definition": "The residential status of the patient. For example if this patient is a UK resident.",
                "min": 1,
                "type":  [
                    {
                        "code": "CodeableConcept"
                    }
                ],
                "binding": {
                    "strength": "extensible",
                    "valueSet": "https://fhir.hl7.org.uk/ValueSet/UKCore-ResidentialStatus"
                }
            }
        ]
    }
}

Examples

Example UKCore-Patient-Extension-ResidentialStatus

StructureDefinition Extension-UKCore-VaccinationProcedure

This describes the immunization procedure code.

Purpose

This extension extends the Immunization resource to support the exchange of an immunisation or vaccination procedure code, which is currently not supported by the FHIR standard.

Usage

Whilst there is a binding within this extension to a UKCoreVaccinationProcedure ValueSet, an additional ValueSet UKCore-VaccinationProcedureSupplementary is available that essentially extends the UKCoreVaccinationProcedure ValueSet with SNOMED CT concepts that some systems may have used in the past on record entries that may also be relevant to the population of the UKCore-VaccinationProcedure extension within Immunization profile instances.

Context of Use
Use on element	Immunization

Snapshot View

Extension	I		Extension	Element Id Extension Short description An extension to hold an immunization procedure code Definition An extension to hold an immunization procedure code. Data Type Extension Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
url		1..1	System.StringFixed Value	Element Id Extension.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data Type System.String Fixed Value https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-VaccinationProcedure Mappings rim:N/A
value[x]		1..1	Binding	Element Id Extension.value[x] Short description A code from the SNOMED Clinical Terminology UK coding system to record a vaccination procedure Definition A code from the SNOMED Clinical Terminology UK coding system to record a vaccination procedure. Binding UKCoreVaccinationProcedure (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
valueCodeableConcept			CodeableConcept	Data Type CodeableConcept

Differential View

Extension	I		Extension	Element Id Extension Short description An extension to hold an immunization procedure code Definition An extension to hold an immunization procedure code. Data Type Extension Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
url		1..1	System.StringFixed Value	Element Id Extension.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data Type System.String Fixed Value https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-VaccinationProcedure Mappings rim:N/A
value[x]		1..1	Binding	Element Id Extension.value[x] Short description A code from the SNOMED Clinical Terminology UK coding system to record a vaccination procedure Definition A code from the SNOMED Clinical Terminology UK coding system to record a vaccination procedure. Binding UKCoreVaccinationProcedure (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
valueCodeableConcept			CodeableConcept	Data Type CodeableConcept

Hybrid View

Extension	I		Extension	Element Id Extension Short description An extension to hold an immunization procedure code Definition An extension to hold an immunization procedure code. Data Type Extension Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
url		1..1	System.StringFixed Value	Element Id Extension.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data Type System.String Fixed Value https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-VaccinationProcedure Mappings rim:N/A
value[x]		1..1	Binding	Element Id Extension.value[x] Short description A code from the SNOMED Clinical Terminology UK coding system to record a vaccination procedure Definition A code from the SNOMED Clinical Terminology UK coding system to record a vaccination procedure. Binding UKCoreVaccinationProcedure (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
valueCodeableConcept			CodeableConcept	Data Type CodeableConcept

Table View

Extension		..1
Extension.url		..
Extension.value[x]	CodeableConcept	1..

XML View

<StructureDefinition xmlns="http://hl7.org/fhir">
    <id value="Extension-UKCore-VaccinationProcedure" />
    <url value="https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-VaccinationProcedure" />
    <version value="2.1.0" />
    <name value="ExtensionUKCoreVaccinationProcedure" />
    <title value="Extension UK Core Vaccination Procedure" />
    <status value="active" />
    <date value="2021-09-10" />
    <publisher value="HL7 UK" />
    <contact>
        <name value="HL7 UK" />
        <telecom>
            <system value="email" />
            <value value="secretariat@hl7.org.uk" />
            <use value="work" />
            <rank value="1" />
        </telecom>
    </contact>
    <contact>
        <name value="NHS Digital" />
        <telecom>
            <system value="email" />
            <value value="interoperabilityteam@nhs.net" />
            <use value="work" />
            <rank value="2" />
        </telecom>
    </contact>
    <description value="This describes the immunization procedure code." />
    <purpose value="This extension extends the Immunization resource to support the exchange of an immunization procedure code, which is currently not supported by the FHIR standard." />
    <copyright value="Copyright &#169; 2021+ HL7 UK Licensed under the Apache License, Version 2.0 (the &quot;License&quot;); you may not use this file except in compliance with the License. You may obtain a copy of the License at  http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an &quot;AS IS&quot; BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. HL7&#174; FHIR&#174; standard Copyright &#169; 2011+ HL7 The HL7&#174; FHIR&#174; standard is used under the FHIR license. You may obtain a copy of the FHIR license at  https://www.hl7.org/fhir/license.html." />
    <fhirVersion value="4.0.1" />
    <mapping>
        <identity value="rim" />
        <uri value="http://hl7.org/v3" />
        <name value="RIM Mapping" />
    </mapping>
    <kind value="complex-type" />
    <abstract value="false" />
    <context>
        <type value="element" />
        <expression value="Immunization" />
    </context>
    <type value="Extension" />
    <baseDefinition value="http://hl7.org/fhir/StructureDefinition/Extension" />
    <derivation value="constraint" />
    <differential>
        <element id="Extension">
            <path value="Extension" />
            <short value="An extension to hold an immunization procedure code" />
            <definition value="An extension to hold an immunization procedure code." />
            <max value="1" />
        </element>
        <element id="Extension.url">
            <path value="Extension.url" />
            <fixedUri value="https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-VaccinationProcedure" />
        </element>
        <element id="Extension.value[x]">
            <path value="Extension.value[x]" />
            <short value="A code from the SNOMED Clinical Terminology UK coding system to record a vaccination procedure" />
            <definition value="A code from the SNOMED Clinical Terminology UK coding system to record a vaccination procedure." />
            <min value="1" />
            <type>
                <code value="CodeableConcept" />
            </type>
            <binding>
                <strength value="extensible" />
                <valueSet value="https://fhir.hl7.org.uk/ValueSet/UKCore-VaccinationProcedure" />
            </binding>
        </element>
    </differential>
</StructureDefinition>

JSON View

{
    "resourceType": "StructureDefinition",
    "id": "Extension-UKCore-VaccinationProcedure",
    "url": "https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-VaccinationProcedure",
    "version": "2.1.0",
    "name": "ExtensionUKCoreVaccinationProcedure",
    "title": "Extension UK Core Vaccination Procedure",
    "status": "active",
    "date": "2021-09-10",
    "publisher": "HL7 UK",
    "contact":  [
        {
            "name": "HL7 UK",
            "telecom":  [
                {
                    "system": "email",
                    "value": "secretariat@hl7.org.uk",
                    "use": "work",
                    "rank": 1
                }
            ]
        },
        {
            "name": "NHS Digital",
            "telecom":  [
                {
                    "system": "email",
                    "value": "interoperabilityteam@nhs.net",
                    "use": "work",
                    "rank": 2
                }
            ]
        }
    ],
    "description": "This describes the immunization procedure code.",
    "purpose": "This extension extends the Immunization resource to support the exchange of an immunization procedure code, which is currently not supported by the FHIR standard.",
    "copyright": "Copyright © 2021+ HL7 UK Licensed under the Apache License, Version 2.0 (the \"License\"); you may not use this file except in compliance with the License. You may obtain a copy of the License at  http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an \"AS IS\" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. HL7® FHIR® standard Copyright © 2011+ HL7 The HL7® FHIR® standard is used under the FHIR license. You may obtain a copy of the FHIR license at  https://www.hl7.org/fhir/license.html.",
    "fhirVersion": "4.0.1",
    "mapping":  [
        {
            "identity": "rim",
            "uri": "http://hl7.org/v3",
            "name": "RIM Mapping"
        }
    ],
    "kind": "complex-type",
    "abstract": false,
    "context":  [
        {
            "type": "element",
            "expression": "Immunization"
        }
    ],
    "type": "Extension",
    "baseDefinition": "http://hl7.org/fhir/StructureDefinition/Extension",
    "derivation": "constraint",
    "differential": {
        "element":  [
            {
                "id": "Extension",
                "path": "Extension",
                "short": "An extension to hold an immunization procedure code",
                "definition": "An extension to hold an immunization procedure code.",
                "max": "1"
            },
            {
                "id": "Extension.url",
                "path": "Extension.url",
                "fixedUri": "https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-VaccinationProcedure"
            },
            {
                "id": "Extension.value[x]",
                "path": "Extension.value[x]",
                "short": "A code from the SNOMED Clinical Terminology UK coding system to record a vaccination procedure",
                "definition": "A code from the SNOMED Clinical Terminology UK coding system to record a vaccination procedure.",
                "min": 1,
                "type":  [
                    {
                        "code": "CodeableConcept"
                    }
                ],
                "binding": {
                    "strength": "extensible",
                    "valueSet": "https://fhir.hl7.org.uk/ValueSet/UKCore-VaccinationProcedure"
                }
            }
        ]
    }
}

Examples

Example UKCore-Immunization-Extension-VaccinationProcedure
Example UKCore-Immunization-Extension-VaccinationProcedureCovid