| EpisodeOfCare | I | | EpisodeOfCare | There are no (further) constraints on this element Element IdShort description An association of a Patient with an Organization and Healthcare Provider(s) for a period of time that the Organization assumes some level of responsibility Alternate names Case Program Problem Definition An association between a patient and an organization / healthcare provider(s) during which time encounters may occur. The managing organization assumes a level of responsibility for the patient during this time.
EpisodeOfCare Constraints- dom-2:If the resource is contained in another resource, it SHALL NOT contain nested Resources
contained.contained.empty() - dom-4:If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated
contained.meta.versionId.empty() and contained.meta.lastUpdated.empty() - dom-3:If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource
contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty() - dom-6:A resource should have narrative for robust management
text.`div`.exists() - dom-5:If a resource is contained in another resource, it SHALL NOT have a security label
contained.meta.security.empty()
- rim:Entity. Role, or Act
- workflow:Event
- rim:n/a
|
| identifier | | 0..* | Identifier | There are no (further) constraints on this element Element IdShort description Business Identifier(s) relevant for this EpisodeOfCare Definition The EpisodeOfCare may be known by different identifiers for different contexts of use, such as when an external agency is tracking the Episode for funding purposes.
Identifier Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
- rim:n/a
- v2:CX / EI (occasionally, more often EI maps to a resource id or a URL)
- rim:II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT]
- servd:Identifier
- workflow:Event.identifier
- w5:FiveWs.identifier
|
| use | Σ ?! | 0..1 | codeBinding | There are no (further) constraints on this element Element IdEpisodeOfCare.identifier.use usual | official | temp | secondary | old (If known) Definition The purpose of this identifier.
Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.
Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.
code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required)Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
- rim:n/a
- v2:N/A
- rim:Role.code or implied by context
|
| type | Σ | 0..1 | CodeableConceptBinding | There are no (further) constraints on this element Element IdEpisodeOfCare.identifier.type Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.
Allows users to make use of identifiers when the identifier system is not known.
This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.
CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible)Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
- rim:n/a
- v2:CE/CNE/CWE
- rim:CD
- orim:fhir:CodeableConcept rdfs:subClassOf dt:CD
- v2:CX.5
- rim:Role.code or implied by context
|
| system | Σ | 0..1 | uri | There are no (further) constraints on this element Element IdEpisodeOfCare.identifier.system The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique.
There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.
Identifier.system is always case sensitive.
uri Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
Generalhttp://www.acme.com/identifiers/patient
Mappings- rim:n/a
- v2:CX.4 / EI-2-4
- rim:II.root or Role.id.root
- servd:./IdentifierType
|
| value | Σ | 0..1 | string | There are no (further) constraints on this element Element IdEpisodeOfCare.identifier.value The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system.
If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.
string Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
Mappings- rim:n/a
- v2:CX.1 / EI.1
- rim:II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root)
- servd:./Value
|
| period | Σ I | 0..1 | Period | There are no (further) constraints on this element Element IdEpisodeOfCare.identifier.period Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use.
A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times").
Period is not used for a duration (a measure of elapsed time). See Duration.
Period Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) - per-1:If present, start SHALL have a lower value than end
start.hasValue().not() or end.hasValue().not() or (start <= end)
- rim:n/a
- v2:DR
- rim:IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"]
- v2:CX.7 + CX.8
- rim:Role.effectiveTime or implied by context
- servd:./StartDate and ./EndDate
|
| assigner | Σ I | 0..1 | Reference(UK Core Organization) | Element IdEpisodeOfCare.identifier.assigner Organization that issued id (may be just text) Definition Organization that issued/manages the identifier.
The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.
Reference(UK Core Organization) Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) - ref-1:SHALL have a contained resource if a local reference is provided
reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))
- rim:n/a
- rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity)
- v2:CX.4 / (CX.4,CX.9,CX.10)
- rim:II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper
- servd:./IdentifierIssuingAuthority
|
| status | Σ ?! | 1..1 | codeBinding | There are no (further) constraints on this element Element IdShort description planned | waitlist | active | onhold | finished | cancelled | entered-in-error Definition planned | waitlist | active | onhold | finished | cancelled.
This element is labeled as a modifier because the status contains codes that mark the episode as not currently valid.
code Binding The status of the episode of care. EpisodeOfCareStatus (required)Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
- rim:n/a
- workflow:Event.status
- w5:FiveWs.status
|
| statusHistory | | 0..* | BackboneElement | There are no (further) constraints on this element Element IdEpisodeOfCare.statusHistory Past list of status codes (the current status may be included to cover the start date of the status) Definition The history of statuses that the EpisodeOfCare has been through (without requiring processing the history of the resource).
BackboneElement Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
|
| status | | 1..1 | codeBinding | There are no (further) constraints on this element Element IdEpisodeOfCare.statusHistory.status planned | waitlist | active | onhold | finished | cancelled | entered-in-error Definition planned | waitlist | active | onhold | finished | cancelled.
Note that FHIR strings SHALL NOT exceed 1MB in size
code Binding The status of the episode of care. EpisodeOfCareStatus (required)Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
|
| period | I | 1..1 | Period | There are no (further) constraints on this element Element IdEpisodeOfCare.statusHistory.period Duration the EpisodeOfCare was in the specified status Definition The period during this EpisodeOfCare that the specific status applied.
A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times").
Period is not used for a duration (a measure of elapsed time). See Duration.
Period Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) - per-1:If present, start SHALL have a lower value than end
start.hasValue().not() or end.hasValue().not() or (start <= end)
- rim:n/a
- v2:DR
- rim:IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"]
|
| type | Σ | 0..* | CodeableConcept | There are no (further) constraints on this element Element IdShort description Type/class - e.g. specialist referral, disease management Definition A classification of the type of episode of care; e.g. specialist referral, disease management, type of funded care.
The type can be very important in processing as this could be used in determining if the EpisodeOfCare is relevant to specific government reporting, or other types of classifications.
CodeableConcept Binding The type of the episode of care. EpisodeOfCareType (example)Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
- rim:n/a
- v2:CE/CNE/CWE
- rim:CD
- orim:fhir:CodeableConcept rdfs:subClassOf dt:CD
- workflow:Event.code
- w5:FiveWs.class
|
| diagnosis | Σ | 0..* | BackboneElement | There are no (further) constraints on this element Element IdShort description The list of diagnosis relevant to this episode of care Definition The list of diagnosis relevant to this episode of care.
BackboneElement Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
|
| condition | Σ I | 1..1 | Reference(UK Core Condition) | Element IdEpisodeOfCare.diagnosis.condition Conditions/problems/diagnoses this episode of care is for Definition A list of conditions/problems/diagnoses that this episode of care is intended to be providing care for.
References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.
Reference(UK Core Condition) Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) - ref-1:SHALL have a contained resource if a local reference is provided
reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))
- rim:n/a
- rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity)
- workflow:Event.reasonReference
- w5:FiveWs.what[x]
|
| reference | Σ I | 0..1 | string | There are no (further) constraints on this element Element IdEpisodeOfCare.diagnosis.condition.reference Literal reference, Relative, internal or absolute URL Definition A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.
string Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
|
| type | Σ | 0..1 | uriBinding | There are no (further) constraints on this element Element IdEpisodeOfCare.diagnosis.condition.type Type the reference refers to (e.g. "Patient") Definition The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.
The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).
This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified.
uri Binding Aa resource (or, for logical models, the URI of the logical model). ResourceType (extensible)Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
|
| identifier | Σ | 0..1 | Identifier | There are no (further) constraints on this element Element IdEpisodeOfCare.diagnosis.condition.identifier Logical reference, when literal reference is not known Definition An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.
When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference
Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.
Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).
Identifier Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
- rim:n/a
- v2:CX / EI (occasionally, more often EI maps to a resource id or a URL)
- rim:II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT]
- servd:Identifier
- rim:.identifier
|
| use | Σ ?! | 0..1 | codeBinding | There are no (further) constraints on this element Element IdEpisodeOfCare.diagnosis.condition.identifier.use usual | official | temp | secondary | old (If known) Definition The purpose of this identifier.
Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.
Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.
code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required)Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
- rim:n/a
- v2:N/A
- rim:Role.code or implied by context
|
| type | Σ | 0..1 | CodeableConceptBinding | There are no (further) constraints on this element Element IdEpisodeOfCare.diagnosis.condition.identifier.type Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.
Allows users to make use of identifiers when the identifier system is not known.
This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.
CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible)Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
- rim:n/a
- v2:CE/CNE/CWE
- rim:CD
- orim:fhir:CodeableConcept rdfs:subClassOf dt:CD
- v2:CX.5
- rim:Role.code or implied by context
|
| system | Σ | 0..1 | uri | There are no (further) constraints on this element Element IdEpisodeOfCare.diagnosis.condition.identifier.system The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique.
There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.
Identifier.system is always case sensitive.
uri Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
Generalhttp://www.acme.com/identifiers/patient
Mappings- rim:n/a
- v2:CX.4 / EI-2-4
- rim:II.root or Role.id.root
- servd:./IdentifierType
|
| value | Σ | 0..1 | string | There are no (further) constraints on this element Element IdEpisodeOfCare.diagnosis.condition.identifier.value The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system.
If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.
string Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
Mappings- rim:n/a
- v2:CX.1 / EI.1
- rim:II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root)
- servd:./Value
|
| period | Σ I | 0..1 | Period | There are no (further) constraints on this element Element IdEpisodeOfCare.diagnosis.condition.identifier.period Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use.
A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times").
Period is not used for a duration (a measure of elapsed time). See Duration.
Period Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) - per-1:If present, start SHALL have a lower value than end
start.hasValue().not() or end.hasValue().not() or (start <= end)
- rim:n/a
- v2:DR
- rim:IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"]
- v2:CX.7 + CX.8
- rim:Role.effectiveTime or implied by context
- servd:./StartDate and ./EndDate
|
| assigner | Σ I | 0..1 | Reference(UK Core Organization) | Element IdEpisodeOfCare.diagnosis.condition.identifier.assigner Organization that issued id (may be just text) Definition Organization that issued/manages the identifier.
The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.
Reference(UK Core Organization) Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) - ref-1:SHALL have a contained resource if a local reference is provided
reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))
- rim:n/a
- rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity)
- v2:CX.4 / (CX.4,CX.9,CX.10)
- rim:II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper
- servd:./IdentifierIssuingAuthority
|
| display | Σ | 0..1 | string | There are no (further) constraints on this element Element IdEpisodeOfCare.diagnosis.condition.display Text alternative for the resource Definition Plain text narrative that identifies the resource in addition to the resource reference.
This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.
string Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
|
| role | Σ | 0..1 | CodeableConceptBinding | There are no (further) constraints on this element Element IdEpisodeOfCare.diagnosis.role Role that this diagnosis has within the episode of care (e.g. admission, billing, discharge …) Definition Role that this diagnosis has within the episode of care (e.g. admission, billing, discharge …).
Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination.
CodeableConcept Binding The type of diagnosis this condition represents. DiagnosisRole (preferred)Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
- rim:n/a
- v2:CE/CNE/CWE
- rim:CD
- orim:fhir:CodeableConcept rdfs:subClassOf dt:CD
|
| rank | Σ | 0..1 | positiveInt | There are no (further) constraints on this element Element IdEpisodeOfCare.diagnosis.rank Ranking of the diagnosis (for each role type) Definition Ranking of the diagnosis (for each role type).
32 bit number; for values larger than this, use decimal
positiveInt Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
|
| patient | Σ I | 1..1 | Reference(UK Core Patient) | Element IdShort description The patient who is the focus of this episode of care Definition The patient who is the focus of this episode of care.
References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.
Reference(UK Core Patient) Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) - ref-1:SHALL have a contained resource if a local reference is provided
reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))
- rim:n/a
- rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity)
- workflow:Event.subject
- w5:FiveWs.subject[x]
- w5:FiveWs.subject
|
| reference | Σ I | 0..1 | string | There are no (further) constraints on this element Element IdEpisodeOfCare.patient.reference Literal reference, Relative, internal or absolute URL Definition A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.
string Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
|
| type | Σ | 0..1 | uriBinding | There are no (further) constraints on this element Element IdEpisodeOfCare.patient.type Type the reference refers to (e.g. "Patient") Definition The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.
The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).
This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified.
uri Binding Aa resource (or, for logical models, the URI of the logical model). ResourceType (extensible)Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
|
| identifier | Σ | 0..1 | Identifier | There are no (further) constraints on this element Element IdEpisodeOfCare.patient.identifier Logical reference, when literal reference is not known Definition An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.
When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference
Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.
Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).
Identifier Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
- rim:n/a
- v2:CX / EI (occasionally, more often EI maps to a resource id or a URL)
- rim:II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT]
- servd:Identifier
- rim:.identifier
|
| use | Σ ?! | 0..1 | codeBinding | There are no (further) constraints on this element Element IdEpisodeOfCare.patient.identifier.use usual | official | temp | secondary | old (If known) Definition The purpose of this identifier.
Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.
Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.
code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required)Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
- rim:n/a
- v2:N/A
- rim:Role.code or implied by context
|
| type | Σ | 0..1 | CodeableConceptBinding | There are no (further) constraints on this element Element IdEpisodeOfCare.patient.identifier.type Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.
Allows users to make use of identifiers when the identifier system is not known.
This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.
CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible)Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
- rim:n/a
- v2:CE/CNE/CWE
- rim:CD
- orim:fhir:CodeableConcept rdfs:subClassOf dt:CD
- v2:CX.5
- rim:Role.code or implied by context
|
| system | Σ | 0..1 | uri | There are no (further) constraints on this element Element IdEpisodeOfCare.patient.identifier.system The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique.
There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.
Identifier.system is always case sensitive.
uri Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
Generalhttp://www.acme.com/identifiers/patient
Mappings- rim:n/a
- v2:CX.4 / EI-2-4
- rim:II.root or Role.id.root
- servd:./IdentifierType
|
| value | Σ | 0..1 | string | There are no (further) constraints on this element Element IdEpisodeOfCare.patient.identifier.value The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system.
If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.
string Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
Mappings- rim:n/a
- v2:CX.1 / EI.1
- rim:II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root)
- servd:./Value
|
| period | Σ I | 0..1 | Period | There are no (further) constraints on this element Element IdEpisodeOfCare.patient.identifier.period Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use.
A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times").
Period is not used for a duration (a measure of elapsed time). See Duration.
Period Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) - per-1:If present, start SHALL have a lower value than end
start.hasValue().not() or end.hasValue().not() or (start <= end)
- rim:n/a
- v2:DR
- rim:IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"]
- v2:CX.7 + CX.8
- rim:Role.effectiveTime or implied by context
- servd:./StartDate and ./EndDate
|
| assigner | Σ I | 0..1 | Reference(UK Core Organization) | Element IdEpisodeOfCare.patient.identifier.assigner Organization that issued id (may be just text) Definition Organization that issued/manages the identifier.
The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.
Reference(UK Core Organization) Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) - ref-1:SHALL have a contained resource if a local reference is provided
reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))
- rim:n/a
- rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity)
- v2:CX.4 / (CX.4,CX.9,CX.10)
- rim:II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper
- servd:./IdentifierIssuingAuthority
|
| display | Σ | 0..1 | string | There are no (further) constraints on this element Element IdEpisodeOfCare.patient.display Text alternative for the resource Definition Plain text narrative that identifies the resource in addition to the resource reference.
This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.
string Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
|
| managingOrganization | Σ I | 0..1 | Reference(UK Core Organization) | Element IdEpisodeOfCare.managingOrganization Organization that assumes care Definition The organization that has assumed the specific responsibilities for the specified duration.
References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.
Reference(UK Core Organization) Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) - ref-1:SHALL have a contained resource if a local reference is provided
reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))
- rim:n/a
- rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity)
- workflow:Event.performer.actor
|
| reference | Σ I | 0..1 | string | There are no (further) constraints on this element Element IdEpisodeOfCare.managingOrganization.reference Literal reference, Relative, internal or absolute URL Definition A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.
string Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
|
| type | Σ | 0..1 | uriBinding | There are no (further) constraints on this element Element IdEpisodeOfCare.managingOrganization.type Type the reference refers to (e.g. "Patient") Definition The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.
The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).
This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified.
uri Binding Aa resource (or, for logical models, the URI of the logical model). ResourceType (extensible)Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
|
| identifier | Σ | 0..1 | Identifier | There are no (further) constraints on this element Element IdEpisodeOfCare.managingOrganization.identifier Logical reference, when literal reference is not known Definition An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.
When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference
Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.
Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).
Identifier Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
- rim:n/a
- v2:CX / EI (occasionally, more often EI maps to a resource id or a URL)
- rim:II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT]
- servd:Identifier
- rim:.identifier
|
| use | Σ ?! | 0..1 | codeBinding | There are no (further) constraints on this element Element IdEpisodeOfCare.managingOrganization.identifier.use usual | official | temp | secondary | old (If known) Definition The purpose of this identifier.
Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.
Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.
code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required)Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
- rim:n/a
- v2:N/A
- rim:Role.code or implied by context
|
| type | Σ | 0..1 | CodeableConceptBinding | There are no (further) constraints on this element Element IdEpisodeOfCare.managingOrganization.identifier.type Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.
Allows users to make use of identifiers when the identifier system is not known.
This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.
CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible)Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
- rim:n/a
- v2:CE/CNE/CWE
- rim:CD
- orim:fhir:CodeableConcept rdfs:subClassOf dt:CD
- v2:CX.5
- rim:Role.code or implied by context
|
| system | Σ | 0..1 | uri | There are no (further) constraints on this element Element IdEpisodeOfCare.managingOrganization.identifier.system The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique.
There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.
Identifier.system is always case sensitive.
uri Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
Generalhttp://www.acme.com/identifiers/patient
Mappings- rim:n/a
- v2:CX.4 / EI-2-4
- rim:II.root or Role.id.root
- servd:./IdentifierType
|
| value | Σ | 0..1 | string | There are no (further) constraints on this element Element IdEpisodeOfCare.managingOrganization.identifier.value The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system.
If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.
string Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
Mappings- rim:n/a
- v2:CX.1 / EI.1
- rim:II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root)
- servd:./Value
|
| period | Σ I | 0..1 | Period | There are no (further) constraints on this element Element IdEpisodeOfCare.managingOrganization.identifier.period Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use.
A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times").
Period is not used for a duration (a measure of elapsed time). See Duration.
Period Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) - per-1:If present, start SHALL have a lower value than end
start.hasValue().not() or end.hasValue().not() or (start <= end)
- rim:n/a
- v2:DR
- rim:IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"]
- v2:CX.7 + CX.8
- rim:Role.effectiveTime or implied by context
- servd:./StartDate and ./EndDate
|
| assigner | Σ I | 0..1 | Reference(UK Core Organization) | Element IdEpisodeOfCare.managingOrganization.identifier.assigner Organization that issued id (may be just text) Definition Organization that issued/manages the identifier.
The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.
Reference(UK Core Organization) Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) - ref-1:SHALL have a contained resource if a local reference is provided
reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))
- rim:n/a
- rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity)
- v2:CX.4 / (CX.4,CX.9,CX.10)
- rim:II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper
- servd:./IdentifierIssuingAuthority
|
| display | Σ | 0..1 | string | There are no (further) constraints on this element Element IdEpisodeOfCare.managingOrganization.display Text alternative for the resource Definition Plain text narrative that identifies the resource in addition to the resource reference.
This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.
string Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
|
| period | Σ I | 0..1 | Period | There are no (further) constraints on this element Element IdShort description Interval during responsibility is assumed Definition The interval during which the managing organization assumes the defined responsibility.
A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times").
Period is not used for a duration (a measure of elapsed time). See Duration.
Period Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) - per-1:If present, start SHALL have a lower value than end
start.hasValue().not() or end.hasValue().not() or (start <= end)
- rim:n/a
- v2:DR
- rim:IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"]
- workflow:Event.occurrence[x]
- w5:FiveWs.init
|
| referralRequest | I | 0..* | Reference(UK Core ServiceRequest) | Element IdEpisodeOfCare.referralRequest Originating Referral Request(s) Definition Referral Request(s) that are fulfilled by this EpisodeOfCare, incoming referrals.
References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.
Reference(UK Core ServiceRequest) Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) - ref-1:SHALL have a contained resource if a local reference is provided
reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))
- rim:n/a
- rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity)
- workflow:Event.basedOn
|
| reference | Σ I | 0..1 | string | There are no (further) constraints on this element Element IdEpisodeOfCare.referralRequest.reference Literal reference, Relative, internal or absolute URL Definition A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.
string Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
|
| type | Σ | 0..1 | uriBinding | There are no (further) constraints on this element Element IdEpisodeOfCare.referralRequest.type Type the reference refers to (e.g. "Patient") Definition The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.
The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).
This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified.
uri Binding Aa resource (or, for logical models, the URI of the logical model). ResourceType (extensible)Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
|
| identifier | Σ | 0..1 | Identifier | There are no (further) constraints on this element Element IdEpisodeOfCare.referralRequest.identifier Logical reference, when literal reference is not known Definition An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.
When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference
Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.
Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).
Identifier Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
- rim:n/a
- v2:CX / EI (occasionally, more often EI maps to a resource id or a URL)
- rim:II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT]
- servd:Identifier
- rim:.identifier
|
| use | Σ ?! | 0..1 | codeBinding | There are no (further) constraints on this element Element IdEpisodeOfCare.referralRequest.identifier.use usual | official | temp | secondary | old (If known) Definition The purpose of this identifier.
Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.
Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.
code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required)Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
- rim:n/a
- v2:N/A
- rim:Role.code or implied by context
|
| type | Σ | 0..1 | CodeableConceptBinding | There are no (further) constraints on this element Element IdEpisodeOfCare.referralRequest.identifier.type Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.
Allows users to make use of identifiers when the identifier system is not known.
This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.
CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible)Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
- rim:n/a
- v2:CE/CNE/CWE
- rim:CD
- orim:fhir:CodeableConcept rdfs:subClassOf dt:CD
- v2:CX.5
- rim:Role.code or implied by context
|
| system | Σ | 0..1 | uri | There are no (further) constraints on this element Element IdEpisodeOfCare.referralRequest.identifier.system The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique.
There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.
Identifier.system is always case sensitive.
uri Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
Generalhttp://www.acme.com/identifiers/patient
Mappings- rim:n/a
- v2:CX.4 / EI-2-4
- rim:II.root or Role.id.root
- servd:./IdentifierType
|
| value | Σ | 0..1 | string | There are no (further) constraints on this element Element IdEpisodeOfCare.referralRequest.identifier.value The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system.
If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.
string Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
Mappings- rim:n/a
- v2:CX.1 / EI.1
- rim:II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root)
- servd:./Value
|
| period | Σ I | 0..1 | Period | There are no (further) constraints on this element Element IdEpisodeOfCare.referralRequest.identifier.period Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use.
A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times").
Period is not used for a duration (a measure of elapsed time). See Duration.
Period Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) - per-1:If present, start SHALL have a lower value than end
start.hasValue().not() or end.hasValue().not() or (start <= end)
- rim:n/a
- v2:DR
- rim:IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"]
- v2:CX.7 + CX.8
- rim:Role.effectiveTime or implied by context
- servd:./StartDate and ./EndDate
|
| assigner | Σ I | 0..1 | Reference(UK Core Organization) | Element IdEpisodeOfCare.referralRequest.identifier.assigner Organization that issued id (may be just text) Definition Organization that issued/manages the identifier.
The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.
Reference(UK Core Organization) Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) - ref-1:SHALL have a contained resource if a local reference is provided
reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))
- rim:n/a
- rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity)
- v2:CX.4 / (CX.4,CX.9,CX.10)
- rim:II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper
- servd:./IdentifierIssuingAuthority
|
| display | Σ | 0..1 | string | There are no (further) constraints on this element Element IdEpisodeOfCare.referralRequest.display Text alternative for the resource Definition Plain text narrative that identifies the resource in addition to the resource reference.
This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.
string Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
|
| careManager | I | 0..1 | Reference(UK Core Practitioner | UK Core PractitionerRole) | Element IdEpisodeOfCare.careManager Care manager/care coordinator for the patient Definition The practitioner that is the care manager/care coordinator for this patient.
References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.
Reference(UK Core Practitioner | UK Core PractitionerRole) Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) - ref-1:SHALL have a contained resource if a local reference is provided
reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))
- rim:n/a
- rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity)
- workflow:Event.performer.actor
|
| reference | Σ I | 0..1 | string | There are no (further) constraints on this element Element IdEpisodeOfCare.careManager.reference Literal reference, Relative, internal or absolute URL Definition A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.
string Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
|
| type | Σ | 0..1 | uriBinding | There are no (further) constraints on this element Element IdEpisodeOfCare.careManager.type Type the reference refers to (e.g. "Patient") Definition The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.
The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).
This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified.
uri Binding Aa resource (or, for logical models, the URI of the logical model). ResourceType (extensible)Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
|
| identifier | Σ | 0..1 | Identifier | There are no (further) constraints on this element Element IdEpisodeOfCare.careManager.identifier Logical reference, when literal reference is not known Definition An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.
When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference
Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.
Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).
Identifier Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
- rim:n/a
- v2:CX / EI (occasionally, more often EI maps to a resource id or a URL)
- rim:II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT]
- servd:Identifier
- rim:.identifier
|
| use | Σ ?! | 0..1 | codeBinding | There are no (further) constraints on this element Element IdEpisodeOfCare.careManager.identifier.use usual | official | temp | secondary | old (If known) Definition The purpose of this identifier.
Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.
Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.
code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required)Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
- rim:n/a
- v2:N/A
- rim:Role.code or implied by context
|
| type | Σ | 0..1 | CodeableConceptBinding | There are no (further) constraints on this element Element IdEpisodeOfCare.careManager.identifier.type Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.
Allows users to make use of identifiers when the identifier system is not known.
This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.
CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible)Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
- rim:n/a
- v2:CE/CNE/CWE
- rim:CD
- orim:fhir:CodeableConcept rdfs:subClassOf dt:CD
- v2:CX.5
- rim:Role.code or implied by context
|
| system | Σ | 0..1 | uri | There are no (further) constraints on this element Element IdEpisodeOfCare.careManager.identifier.system The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique.
There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.
Identifier.system is always case sensitive.
uri Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
Generalhttp://www.acme.com/identifiers/patient
Mappings- rim:n/a
- v2:CX.4 / EI-2-4
- rim:II.root or Role.id.root
- servd:./IdentifierType
|
| value | Σ | 0..1 | string | There are no (further) constraints on this element Element IdEpisodeOfCare.careManager.identifier.value The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system.
If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.
string Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
Mappings- rim:n/a
- v2:CX.1 / EI.1
- rim:II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root)
- servd:./Value
|
| period | Σ I | 0..1 | Period | There are no (further) constraints on this element Element IdEpisodeOfCare.careManager.identifier.period Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use.
A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times").
Period is not used for a duration (a measure of elapsed time). See Duration.
Period Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) - per-1:If present, start SHALL have a lower value than end
start.hasValue().not() or end.hasValue().not() or (start <= end)
- rim:n/a
- v2:DR
- rim:IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"]
- v2:CX.7 + CX.8
- rim:Role.effectiveTime or implied by context
- servd:./StartDate and ./EndDate
|
| assigner | Σ I | 0..1 | Reference(UK Core Organization) | Element IdEpisodeOfCare.careManager.identifier.assigner Organization that issued id (may be just text) Definition Organization that issued/manages the identifier.
The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.
Reference(UK Core Organization) Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) - ref-1:SHALL have a contained resource if a local reference is provided
reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))
- rim:n/a
- rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity)
- v2:CX.4 / (CX.4,CX.9,CX.10)
- rim:II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper
- servd:./IdentifierIssuingAuthority
|
| display | Σ | 0..1 | string | There are no (further) constraints on this element Element IdEpisodeOfCare.careManager.display Text alternative for the resource Definition Plain text narrative that identifies the resource in addition to the resource reference.
This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.
string Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
|
| team | I | 0..* | Reference(UK Core CareTeam) | Element IdShort description Other practitioners facilitating this episode of care Alternate names CareTeam Definition The list of practitioners that may be facilitating this episode of care for specific purposes.
References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.
Reference(UK Core CareTeam) Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) - ref-1:SHALL have a contained resource if a local reference is provided
reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))
- rim:n/a
- rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity)
- workflow:Event.performer.actor
|
| reference | Σ I | 0..1 | string | There are no (further) constraints on this element Element IdEpisodeOfCare.team.reference Literal reference, Relative, internal or absolute URL Definition A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.
string Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
|
| type | Σ | 0..1 | uriBinding | There are no (further) constraints on this element Element IdShort description Type the reference refers to (e.g. "Patient") Definition The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.
The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).
This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified.
uri Binding Aa resource (or, for logical models, the URI of the logical model). ResourceType (extensible)Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
|
| identifier | Σ | 0..1 | Identifier | There are no (further) constraints on this element Element IdEpisodeOfCare.team.identifier Logical reference, when literal reference is not known Definition An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.
When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference
Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.
Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).
Identifier Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
- rim:n/a
- v2:CX / EI (occasionally, more often EI maps to a resource id or a URL)
- rim:II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT]
- servd:Identifier
- rim:.identifier
|
| use | Σ ?! | 0..1 | codeBinding | There are no (further) constraints on this element Element IdEpisodeOfCare.team.identifier.use usual | official | temp | secondary | old (If known) Definition The purpose of this identifier.
Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.
Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.
code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required)Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
- rim:n/a
- v2:N/A
- rim:Role.code or implied by context
|
| type | Σ | 0..1 | CodeableConceptBinding | There are no (further) constraints on this element Element IdEpisodeOfCare.team.identifier.type Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.
Allows users to make use of identifiers when the identifier system is not known.
This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.
CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible)Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
- rim:n/a
- v2:CE/CNE/CWE
- rim:CD
- orim:fhir:CodeableConcept rdfs:subClassOf dt:CD
- v2:CX.5
- rim:Role.code or implied by context
|
| system | Σ | 0..1 | uri | There are no (further) constraints on this element Element IdEpisodeOfCare.team.identifier.system The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique.
There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.
Identifier.system is always case sensitive.
uri Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
Generalhttp://www.acme.com/identifiers/patient
Mappings- rim:n/a
- v2:CX.4 / EI-2-4
- rim:II.root or Role.id.root
- servd:./IdentifierType
|
| value | Σ | 0..1 | string | There are no (further) constraints on this element Element IdEpisodeOfCare.team.identifier.value The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system.
If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.
string Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
Mappings- rim:n/a
- v2:CX.1 / EI.1
- rim:II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root)
- servd:./Value
|
| period | Σ I | 0..1 | Period | There are no (further) constraints on this element Element IdEpisodeOfCare.team.identifier.period Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use.
A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times").
Period is not used for a duration (a measure of elapsed time). See Duration.
Period Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) - per-1:If present, start SHALL have a lower value than end
start.hasValue().not() or end.hasValue().not() or (start <= end)
- rim:n/a
- v2:DR
- rim:IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"]
- v2:CX.7 + CX.8
- rim:Role.effectiveTime or implied by context
- servd:./StartDate and ./EndDate
|
| assigner | Σ I | 0..1 | Reference(UK Core Organization) | Element IdEpisodeOfCare.team.identifier.assigner Organization that issued id (may be just text) Definition Organization that issued/manages the identifier.
The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.
Reference(UK Core Organization) Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) - ref-1:SHALL have a contained resource if a local reference is provided
reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))
- rim:n/a
- rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity)
- v2:CX.4 / (CX.4,CX.9,CX.10)
- rim:II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper
- servd:./IdentifierIssuingAuthority
|
| display | Σ | 0..1 | string | There are no (further) constraints on this element Element IdEpisodeOfCare.team.display Text alternative for the resource Definition Plain text narrative that identifies the resource in addition to the resource reference.
This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.
string Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
|
| account | I | 0..* | Reference(Account) | There are no (further) constraints on this element Element IdShort description The set of accounts that may be used for billing for this EpisodeOfCare Definition The set of accounts that may be used for billing for this EpisodeOfCare.
The billing system may choose to allocate billable items associated with the EpisodeOfCare to different referenced Accounts based on internal business rules.
Reference(Account) Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) - ref-1:SHALL have a contained resource if a local reference is provided
reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))
- rim:n/a
- rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity)
|
| reference | Σ I | 0..1 | string | There are no (further) constraints on this element Element IdEpisodeOfCare.account.reference Literal reference, Relative, internal or absolute URL Definition A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.
string Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
|
| type | Σ | 0..1 | uriBinding | There are no (further) constraints on this element Element IdEpisodeOfCare.account.type Type the reference refers to (e.g. "Patient") Definition The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.
The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).
This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified.
uri Binding Aa resource (or, for logical models, the URI of the logical model). ResourceType (extensible)Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
|
| identifier | Σ | 0..1 | Identifier | There are no (further) constraints on this element Element IdEpisodeOfCare.account.identifier Logical reference, when literal reference is not known Definition An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.
When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference
Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.
Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).
Identifier Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
- rim:n/a
- v2:CX / EI (occasionally, more often EI maps to a resource id or a URL)
- rim:II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT]
- servd:Identifier
- rim:.identifier
|
| use | Σ ?! | 0..1 | codeBinding | There are no (further) constraints on this element Element IdEpisodeOfCare.account.identifier.use usual | official | temp | secondary | old (If known) Definition The purpose of this identifier.
Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.
Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.
code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required)Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
- rim:n/a
- v2:N/A
- rim:Role.code or implied by context
|
| type | Σ | 0..1 | CodeableConceptBinding | There are no (further) constraints on this element Element IdEpisodeOfCare.account.identifier.type Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.
Allows users to make use of identifiers when the identifier system is not known.
This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.
CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible)Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
- rim:n/a
- v2:CE/CNE/CWE
- rim:CD
- orim:fhir:CodeableConcept rdfs:subClassOf dt:CD
- v2:CX.5
- rim:Role.code or implied by context
|
| system | Σ | 0..1 | uri | There are no (further) constraints on this element Element IdEpisodeOfCare.account.identifier.system The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique.
There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.
Identifier.system is always case sensitive.
uri Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
Generalhttp://www.acme.com/identifiers/patient
Mappings- rim:n/a
- v2:CX.4 / EI-2-4
- rim:II.root or Role.id.root
- servd:./IdentifierType
|
| value | Σ | 0..1 | string | There are no (further) constraints on this element Element IdEpisodeOfCare.account.identifier.value The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system.
If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.
string Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
Mappings- rim:n/a
- v2:CX.1 / EI.1
- rim:II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root)
- servd:./Value
|
| period | Σ I | 0..1 | Period | There are no (further) constraints on this element Element IdEpisodeOfCare.account.identifier.period Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use.
A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times").
Period is not used for a duration (a measure of elapsed time). See Duration.
Period Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) - per-1:If present, start SHALL have a lower value than end
start.hasValue().not() or end.hasValue().not() or (start <= end)
- rim:n/a
- v2:DR
- rim:IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"]
- v2:CX.7 + CX.8
- rim:Role.effectiveTime or implied by context
- servd:./StartDate and ./EndDate
|
| assigner | Σ I | 0..1 | Reference(UK Core Organization) | Element IdEpisodeOfCare.account.identifier.assigner Organization that issued id (may be just text) Definition Organization that issued/manages the identifier.
The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.
Reference(UK Core Organization) Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count()) - ref-1:SHALL have a contained resource if a local reference is provided
reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))
- rim:n/a
- rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity)
- v2:CX.4 / (CX.4,CX.9,CX.10)
- rim:II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper
- servd:./IdentifierIssuingAuthority
|
| display | Σ | 0..1 | string | There are no (further) constraints on this element Element IdEpisodeOfCare.account.display Text alternative for the resource Definition Plain text narrative that identifies the resource in addition to the resource reference.
This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.
string Constraints- ele-1:All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
|
