Propósito do identificador:

official: O identificador considerado mais fiável para a identificação do item.

temp: Um identificador temporário.

secondary: Um identificador que foi atribuído para identificar o item em um contexto relativo, mas não pode usado em um contexto diferente.

old: O identificador já não é considerado válido, mas pode ser relevante para fins de pesquisa.

Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

The identification of the code system that defines the meaning of the symbol in the code.

Need to be unambiguous about the source of the definition of the symbol.

The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously.

A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

Need to refer to a particular code in the system.

Note that FHIR strings SHALL NOT exceed 1MB in size

A representation of the meaning of the code in the system, following the rules of the system.

Need to be able to carry a human-readable meaning of the code for readers that do not know the system.

Note that FHIR strings SHALL NOT exceed 1MB in size

A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

Very often the text is the same as a displayName of one of the codings.

Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

Para sistemas geridos pela SPMS o system tem de seguir a seguinte estrutura: http://spms.min-saude.pt/<sistema>/identifiers/<identifier-id>

The portion of the identifier typically relevant to the user and which is unique within the context of the system.

If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

A time period defined by a start and end date and optionally time.

A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times").

Period is not used for a duration (a measure of elapsed time). See Duration.

A name which details the functional use for this link - see http://www.iana.org/assignments/link-relations/link-relations.xhtml#link-relations-1.

Note that FHIR strings SHALL NOT exceed 1MB in size

The reference details for the link.

see http://en.wikipedia.org/wiki/Uniform_resource_identifier

The Absolute URL for the resource. The fullUrl SHALL NOT disagree with the id in the resource - i.e. if the fullUrl is not a urn:uuid, the URL shall be version-independent URL consistent with the Resource.id. The fullUrl is a version independent reference to the resource. The fullUrl element SHALL have a value except that:

• fullUrl can be empty on a POST (although it does not need to when specifying a temporary id for reference in the bundle)
• Results from operations might involve resources that are not identified.

fullUrl might not be unique in the context of a resource. Note that since FHIR resources do not need to be served through the FHIR API, the fullURL might be a URN or an absolute URL that does not end with the logical id of the resource (Resource.id). However, but if the fullUrl does look like a RESTful server URL (e.g. meets the regex, then the 'id' portion of the fullUrl SHALL end with the Resource.id.

Note that the fullUrl is not the same as the canonical URL - it's an absolute url for an endpoint serving the resource (these will happen to have the same value on the canonical server for the resource with the canonical URL).

Why this entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process.

There is only one mode. In some corner cases, a resource may be included because it is both a match and an include. In these circumstances, 'match' takes precedence.

Why an entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process.

When searching, the server's search ranking score for the entry.

Servers are not required to return a ranking score. 1 is most relevant, and 0 is least relevant. Often, search results are sorted by score, but the client may specify a different sort order.

See Patient Match for the EMPI search which relates to this element.

In a transaction or batch, this is the HTTP action to be executed for this entry. In a history bundle, this indicates the HTTP action that occurred.

Note that FHIR strings SHALL NOT exceed 1MB in size

HTTP verbs (in the HTTP command line). See HTTP rfc for details.

The URL for this entry, relative to the root (the address to which the request is posted).

E.g. for a Patient Create, the method would be "POST" and the URL would be "Patient". For a Patient Update, the method would be PUT and the URL would be "Patient/[id]".

If the ETag values match, return a 304 Not Modified status. See the API documentation for "Conditional Read".

Note that FHIR strings SHALL NOT exceed 1MB in size

Only perform the operation if the last updated date matches. See the API documentation for "Conditional Read".

Note: This is intended for where precisely observed times are required, typically system logs etc., and not human-reported times - for them, see date and dateTime (which can be as precise as instant, but is not required to be) below. Time zone is always required

Only perform the operation if the Etag value matches. For more information, see the API section "Managing Resource Contention".

Note that FHIR strings SHALL NOT exceed 1MB in size

Instruct the server not to perform the create if a specified resource already exists. For further information, see the API documentation for "Conditional Create". This is just the query portion of the URL - what follows the "?" (not including the "?").

Note that FHIR strings SHALL NOT exceed 1MB in size

The status code returned by processing this entry. The status SHALL start with a 3 digit HTTP code (e.g. 404) and may contain the standard HTTP description associated with the status code.

Note that FHIR strings SHALL NOT exceed 1MB in size

The location header created by processing this operation, populated if the operation returns a location.

see http://en.wikipedia.org/wiki/Uniform_resource_identifier

The Etag for the resource, if the operation for the entry produced a versioned resource (see Resource Metadata and Versioning and Managing Resource Contention).

Etags match the Resource.meta.versionId. The ETag has to match the version id in the header if a resource is included.

The date/time that the resource was modified on the server.

This has to match the same time in the meta header (meta.lastUpdated) if a resource is included.

An indication of the reason that the entity signed this document. This may be explicitly included as part of the signature information and can be used when determining accountability for various actions concerning the document.

Examples include attesting to: authorship, correct transcription, and witness of specific event. Also known as a "Commitment Type Indication".

When the digital signature was signed.

This should agree with the information in the signature.

A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.

The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).

This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified.

Plain text narrative that identifies the resource in addition to the resource reference.

This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.

A mime type that indicates the technical format of the target resources signed by the signature.

"xml", "json" and "ttl" are allowed, which describe the simple encodings described in the specification (and imply appropriate bundle support). Otherwise, mime types are legal here.

BCP 13 (RFCs 2045, 2046, 2047, 4288, 4289 and 2049)

A mime type that indicates the technical format of the signature. Important mime types are application/signature+xml for X ML DigSig, application/jose for JWS, and image/* for a graphical image of a signature, etc.

Note that FHIR strings SHALL NOT exceed 1MB in size

BCP 13 (RFCs 2045, 2046, 2047, 4288, 4289 and 2049)

The base64 encoding of the Signature content. When signature is not recorded electronically this element would be empty.

Where the signature type is an XML DigSig, the signed content is a FHIR Resource(s), the signature is of the XML form of the Resource(s) using XML-Signature (XMLDIG) "Detached Signature" form.