Implementation Guide for Portuguese Use Cases

ProfilesPTTransversais/MessageHeaderPTTRVEXE.StructureDefinition.json

Tree view

MessageHeaderPTTRVEXE (MessageHeader)	I		MessageHeaderPTCore	There are no (further) constraints on this element Element id MessageHeader Short description A resource that describes a message that is exchanged between systems Definition The header for a message exchange that is either requesting or responding to an action. The reference(s) that are the subject of the action as well as other information related to the action are typically transmitted in a bundle in which the MessageHeader resource instance is the first resource in the bundle. Data type MessageHeaderPTCore Constraints dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources `contained.contained.empty()` dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated `contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()` dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource `contained.where(((id.exists() and ('#'+id in (%resource.descendants().reference \| %resource.descendants().as(canonical) \| %resource.descendants().as(uri) \| %resource.descendants().as(url)))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(uri) = '#').exists()).not()).trace('unmatched', id).empty()` dom-6: A resource should have narrative for robust management text.`div`.exists() dom-5: If a resource is contained in another resource, it SHALL NOT have a security label `contained.meta.security.empty()` Mappings rim: Entity. Role, or Act v2: MSH / MSA / ERR rim: Message w5: infrastructure.exchange
id	Σ	1..1	id	There are no (further) constraints on this element Element id MessageHeader.id Short description Logical id of this artifact Definition The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes. Comments The only time that a resource does not have an id is when it is being submitted to the server using a create operation. Data type id
meta	Σ	0..1	MetaPTCore	There are no (further) constraints on this element Element id MessageHeader.meta Short description Metadata about the resource Definition The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource. Data type MetaPTCore Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a rim: N/A
implicitRules	Σ ?!	0..1	uri	There are no (further) constraints on this element Element id MessageHeader.implicitRules Short description A set of rules under which this content was created Definition A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc. Comments Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc. Data type uri Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a
language		0..1	codeBinding	There are no (further) constraints on this element Element id MessageHeader.language Short description Language of the resource content Definition The base language in which the resource is written. Comments Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute). Data type code Binding IETF language tag CommonLanguages (preferred) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a
text		0..1	Narrative	There are no (further) constraints on this element Element id MessageHeader.text Short description Text summary of the resource, for human interpretation Alternate names narrative, html, xhtml, display Definition A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety. Comments Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later. Data type Narrative Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a rim: N/A rim: Act.text?
contained	I	0..0	Resource	There are no (further) constraints on this element Element id MessageHeader.contained Short description Contained, inline Resources Alternate names inline resources, anonymous resources, contained resources Definition These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope. Comments This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels. Data type Resource Constraints dom-r4b: Containing new R4B resources within R4 resources may cause interoperability issues if instances are shared with R4 systems ($this is Citation or $this is Evidence or $this is EvidenceReport or $this is EvidenceVariable or $this is MedicinalProductDefinition or $this is PackagedProductDefinition or $this is AdministrableProductDefinition or $this is Ingredient or $this is ClinicalUseDefinition or $this is RegulatedAuthorization or $this is SubstanceDefinition or $this is SubscriptionStatus or $this is SubscriptionTopic) implies (%resource is Citation or %resource is Evidence or %resource is EvidenceReport or %resource is EvidenceVariable or %resource is MedicinalProductDefinition or %resource is PackagedProductDefinition or %resource is AdministrableProductDefinition or %resource is Ingredient or %resource is ClinicalUseDefinition or %resource is RegulatedAuthorization or %resource is SubstanceDefinition or %resource is SubscriptionStatus or %resource is SubscriptionTopic) Mappings rim: Entity. Role, or Act rim: N/A
extension	I	0..*	Extension	There are no (further) constraints on this element Element id MessageHeader.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	?! I	0..*	Extension	There are no (further) constraints on this element Element id MessageHeader.modifierExtension Short description Extensions that cannot be ignored Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
event[x]	Σ	1..1		There are no (further) constraints on this element Element id MessageHeader.event[x] Short description Code for the event this message represents or link to event definition Definition Código que identifica o evento que esta mensagem representa e o liga à sua definição. Requirements Drives the behavior associated with this message. Comments The time of the event will be found in the focus resource. The time of the message will be found in Bundle.timestamp. Binding One of the message events defined as part of this version of FHIR. MessageEvent (example) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a w5: FiveWs.what[x] v2: MSH-9.2 rim: ./payload[classCode="CACT" and moodCode="EVN" and isNormalAct()]/code[isNormalDatatype()]/code
eventCoding			Coding	There are no (further) constraints on this element Data type Coding
eventUri			uri	There are no (further) constraints on this element Data type uri
destination	Σ	1..*	BackboneElement	There are no (further) constraints on this element Element id MessageHeader.destination Short description Message destination application(s) Definition Aplicativo(s) de destino de mensagem. Requirements Indicates where message is to be sent for routing purposes. Allows verification of "am I the intended recipient". Comments There SHOULD be at least one destination, but in some circumstances, the source system is unaware of any particular destination system. Data type BackboneElement Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a w5: FiveWs.subject[x] rim: ./communicationFunction[typeCode="RCV"] w5: FiveWs.subject
id		0..0	id	There are no (further) constraints on this element Element id MessageHeader.destination.id Short description Unique id for inter-element referencing Definition ID único para o elemento num recurso (para referências internas). Pode ser qualquer valor de cadeia que não contenha espaços. Data type id Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id MessageHeader.destination.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id MessageHeader.destination.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
name	Σ	0..1	string	There are no (further) constraints on this element Element id MessageHeader.destination.name Short description Name of system Definition Nome da aplicação destino. Requirements May be used for routing of response and/or to support audit. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: MSH-5 rim: unique(./entity[determinerCode="INST" and (classCode=("DEV", "PSN", "ORG"]/name[type='ST' and isNormalDatatype()])
target	Σ I	0..0	ReferencePTCore(https://spms.min-saude.pt/fhir-r4B/iop/StructureDefinition/DevicePTCore)	There are no (further) constraints on this element Element id MessageHeader.destination.target Short description A reference from one resource to another Definition Referenciar para o recurso Device, no caso o destino seja um dispositivo. Requirements Supports multi-hop routing. Comments References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository. Data type ReferencePTCore(https://spms.min-saude.pt/fhir-r4B/iop/StructureDefinition/DevicePTCore) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')) or (reference='#' and %rootResource!=%resource)` Mappings rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity) rim: unique(./entity[determinerCode="INST" and (classCode=("DEV", "PSN", "ORG"]
endpoint	Σ	1..1	url	Element id MessageHeader.destination.endpoint Short description Actual destination address or id Definition Endereço ou id do destino da mensagem. Requirements Identifies where to route the message. Comments The id may be a non-resolvable URI for systems that do not use standard network-based addresses. Data type url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: MSH-25 (or MSH-6) rim: ./telecom
receiver	Σ I	1..1	ReferencePTCore(OrganizationPTTRV)	Element id MessageHeader.destination.receiver Short description A reference from one resource to another Definition Entidade que vai receber os dados. Requirements Allows routing beyond just the application level. Comments References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository. Data type ReferencePTCore(OrganizationPTTRV) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')) or (reference='#' and %rootResource!=%resource)` Mappings rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity) w5: FiveWs.subject[x] v2: PRT-5:PRT-4='WAYR' / PRT-8:PRT-4='WAYR' rim: Not directly supported. Could be shared using attentionLine.value with an appropriate keyWordText w5: FiveWs.subject
sender	Σ I	1..1	ReferencePTCore(OrganizationPTTRV)	Element id MessageHeader.sender Short description A reference from one resource to another Definition Entidade que envia os dados. Requirements Allows routing beyond just the application level. Comments References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository. Data type ReferencePTCore(OrganizationPTTRV) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')) or (reference='#' and %rootResource!=%resource)` Mappings rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity) w5: FiveWs.subject[x] v2: PRT-5:PRT-4='WAYR' / PRT-8:PRT-4='WAYR' rim: Not directly supported. Could be shared using attentionLine.value with an appropriate keyWordText w5: FiveWs.subject
enterer	Σ I	1..1	ReferencePTCore(PractitionerPTPSSNC)	Element id MessageHeader.enterer Short description A reference from one resource to another Definition Profissional que faz o pedido Requirements Need to know for audit/traceback requirements and possibly for authorization. Comments References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository. Data type ReferencePTCore(PractitionerPTPSSNC) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')) or (reference='#' and %rootResource!=%resource)` Mappings rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity) w5: FiveWs.author v2: EVN-5 / ORC-10 / PRT-5:PRT-4='EP' / ROL where ROL.3 is EP or ORC.10 rim: unique(./controlAct[classCode="CACT" and classCode="EVN" and isNormalAct()]/participation[typeCode="ENT" and isNormalParticipation]/role[classCode="ASSIGNED" and isNormalRole()]/player[isNormalEntity() and classCode=("DEV", "PSN") and determinerCode="INST"])
author	Σ I	0..0	ReferencePTCore(PractitionerPTCore \| PractitionerRolePTCore)	There are no (further) constraints on this element Element id MessageHeader.author Short description A reference from one resource to another Definition Profissional que autorizou o envio dos dados Requirements Need to know for audit/traceback requirements and possibly for authorization. Comments References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository. Data type ReferencePTCore(PractitionerPTCore \| PractitionerRolePTCore) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')) or (reference='#' and %rootResource!=%resource)` Mappings rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity) w5: FiveWs.author v2: ORC-19 / PRT-5:PRT-4='AUT' / ROL where ROL.3 is IP or ORC.12 rim: unique(./controlAct[classCode="CACT" and classCode="EVN" and isNormalAct()]/participation[isHighest(priorityCode) and typeCode="AUT" and isNormalParticipation]/role[classCode="ASSIGNED" and isNormalRole()]/player[isNormalEntity() and classCode=("DEV", "PSN") and determinerCode="INST"])
source	Σ	1..1	BackboneElement	There are no (further) constraints on this element Element id MessageHeader.source Short description Message source application Definition Aplicativo de origem de mensagens Requirements Allows replies, supports audit. Data type BackboneElement Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a w5: FiveWs.actor rim: unique(./communicationFunction[typeCode="SND"])
id		0..0	id	There are no (further) constraints on this element Element id MessageHeader.source.id Short description Unique id for inter-element referencing Definition ID único para o elemento num recurso (para referências internas). Pode ser qualquer valor de cadeia que não contenha espaços. Data type id Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id MessageHeader.source.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id MessageHeader.source.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
name	Σ	0..1	string	Element id MessageHeader.source.name Short description Name of system Definition Nome da aplicação origem dos dados. Requirements May be used to support audit. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: MSH-3 rim: unique(./entity[determinerCode="INST" and classCode="DEV"]/name[type='ST' and isNormalDatatype()])
software	Σ	0..0	string	There are no (further) constraints on this element Element id MessageHeader.source.software Short description Name of software running the system Definition Configuração ou outras informações úteis da aplicação origem Requirements Supports audit and possibly interface engine behavior. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: SFT-3 ( +SFT-1) rim: unique(./entity[determinerCode="INST" and classCode="DEV"]/softwareName[isNormalDatatype()])
version	Σ	0..0	string	There are no (further) constraints on this element Element id MessageHeader.source.version Short description Version of software running Definition Versão da aplicação origem Requirements Supports audit and possibly interface engine behavior. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: SFT-2 rim: (Not supported)
contact	Σ I	0..0	ContactPointPTCore	There are no (further) constraints on this element Element id MessageHeader.source.contact Short description Details of a Technology mediated contact point (phone, fax, email, etc.) Definition Contacto para suporte, no âmbito das comunicações de mensagens Requirements Allows escalation of technical issues. Data type ContactPointPTCore Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` cpt-2: A system is required if a value is provided. `value.empty() or system.exists()` Mappings rim: n/a v2: XTN rim: TEL servd: ContactPoint v2: (MSH-22?) rim: unique(./entity[determinerCode="INST" and classCode="DEV"]/scopesRole[normalRole() and classCode="CON" and layer[classCode="PSN"]/telecom[isNormalDatatype()])
endpoint	Σ	1..1	url	Element id MessageHeader.source.endpoint Short description Actual message source address or id Definition Endereço ou id da origem da mensagem. Requirements Identifies where to send responses, may influence security permissions. Comments The id may be a non-resolvable URI for systems that do not use standard network-based addresses. Data type url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: MSH-24 rim: ./telecom[isNormalDatatype()]
responsible	Σ I	0..0	ReferencePTCore(PractitionerPTCore \| PractitionerRolePTCore \| OrganizationPTCore)	There are no (further) constraints on this element Element id MessageHeader.responsible Short description A reference from one resource to another Definition Entidade ou profissional com a responsabilidade final pelo evento Requirements Need to know for audit/traceback requirements and possibly for authorization. Comments References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository. Data type ReferencePTCore(PractitionerPTCore \| PractitionerRolePTCore \| OrganizationPTCore) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')) or (reference='#' and %rootResource!=%resource)` Mappings rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity) w5: FiveWs.witness v2: ORC-12 / PRT-5:PRT-4='OP' / PRT-8:PRT-4='OP' / ROL where ROL.3 is RO or ORC.11 rim: unique(./controlAct[classCode="CACT" and classCode="EVN" and isNormalAct()]/participation[isHighest(priorityCode) and typeCode="RESP" and isNormalParticipation]/role[classCode="ASSIGNED" and isNormalRole()]/player[isNormalEntity() and classCode="PSN" and determinerCode="INST"] or ./controlAct[classCode="CACT" and classCode="EVN" and isNormalAct()]/participation[isHighest(priorityCode) and typeCode="RESP" and isNormalParticipation]/role[classCode="ASSIGNED" and isNormalRole()]/scoper[isNormalEntity() and classCode="ORG" and determinerCode="INST"])
reason	Σ	0..0	CodeableConceptPTCore	There are no (further) constraints on this element Element id MessageHeader.reason Short description Concept - reference to a terminology or just text Definition Indica o motivo da ocorrência do evento que é foco desta mensagem. Requirements Need to be able to track why resources are being changed and report in the audit log/history of the resource. May affect authorization. Comments Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination. Data type CodeableConceptPTCore Binding Reason for event occurrence. ExampleMessageReasonCodes (example) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD w5: FiveWs.why[x] v2: EVN.4 / ORC.16 / OBR-31-reason for study / BPO-13-BP indication for use / RXO-20-indication / RXE-27-give indication / RXD-21-indication / RXG-22-indication / RXA-19-indication rim: unique(./controlAct[classCode="CACT" and classCode="EVN" and isNormalAct()]/reasonCode[isNormalDatatype()])
response	Σ	0..1	BackboneElement	There are no (further) constraints on this element Element id MessageHeader.response Short description If this is a reply to prior message Definition Elemento usado no caso de mensagem de resposta Data type BackboneElement Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: MSA rim: ./conveyedAcknowledgement
id		0..0	id	There are no (further) constraints on this element Element id MessageHeader.response.id Short description Unique id for inter-element referencing Definition ID único para o elemento num recurso (para referências internas). Pode ser qualquer valor de cadeia que não contenha espaços. Data type id Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id MessageHeader.response.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id MessageHeader.response.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
identifier	Σ	1..1	id	Element id MessageHeader.response.identifier Short description Id of original message Definition id da mensagem origem enviada que deu origem à resposta. Requirements Allows receiver to know what message is being responded to. Comments RFC 4122 Data type id Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: MSA-2 rim: ./acknowledges.id[isNormalDatatype()]
code	Σ	1..1	codeBinding	Element id MessageHeader.response.code Short description ok \| transient-error \| fatal-error Definition Code that identifies the type of response to the message - whether it was successful or not, and whether it should be resent or not. Requirements Allows the sender of the acknowledge message to know if the request was successful or if action is needed. Comments This is a generic response to the request message. Specific data for the response will be found in MessageHeader.focus. Data type code Binding The kind of response to a message. ResponseType (required) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: MSA-1 rim: ./typeCode[isNormalDatatype()]
details	Σ I	0..1	ReferencePTCore(OperationOutcomePTTRV)	Element id MessageHeader.response.details Short description A reference from one resource to another Definition Detalhes do erro da mensagem. Em caso de code com valor “transient-error” ou “fatal-erro”, referenciar o recurso com os detalhes dos erros ou alertas. Requirements Allows the sender of the message to determine what the specific issues are. Comments References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository. Data type ReferencePTCore(OperationOutcomePTTRV) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')) or (reference='#' and %rootResource!=%resource)` Mappings rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2: ERR rim: AcknowledgementDetail or Observation[classCode="ALRT" and moodCode="EVN"]
focus	Σ I	0..*	ReferencePTCore(Resource)	Element id MessageHeader.focus Short description A reference from one resource to another Definition Referenciar o(s) recurso(s) raiz da mensagem. Requirements Every message event is about actual data, a single resource, that is identified in the definition of the event, and perhaps some or all linked resources. Comments References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository. Data type ReferencePTCore(Resource) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')) or (reference='#' and %rootResource!=%resource)` Mappings rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity) rim: unique(./controlAct[classCode="CACT" and classCode="EVN" and isNormalAct()]/participation[typeCode="SUBJ" and isNormalParticipation]/role or ./controlAct[classCode="CACT" and classCode="EVN" and isNormalAct()]/outboundRelationship[typeCode="SBJ" and isNormalActRelatoinship]/target)
id		0..0	id	There are no (further) constraints on this element Element id MessageHeader.focus.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type id Mappings rim: n/a
extension	I	0..0	Extension	There are no (further) constraints on this element Element id MessageHeader.focus.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
reference	Σ I	0..1	string	There are no (further) constraints on this element Element id MessageHeader.focus.reference Short description Literal reference, Relative, internal or absolute URL Definition A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources. Comments Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server. Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a rim: N/A
type	Σ	0..0	uriBinding	Element id MessageHeader.focus.type Short description Type the reference refers to (e.g. "Patient") Definition The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent. The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources). Comments This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified. Data type uri Binding ResourceType (extensible) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a rim: N/A
identifier	Σ	0..1	ExtensionIdentifierPTCore	There are no (further) constraints on this element Element id MessageHeader.focus.identifier Short description An identifier intended for computation Definition An identifier - identifies some entity uniquely and unambiguously. Typically this is used for business identifiers. Comments When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it. Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation\|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any). Data type ExtensionIdentifierPTCore Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CX / EI (occasionally, more often EI maps to a resource id or a URL) rim: II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd: Identifier rim: .identifier
display	Σ	0..1	string	There are no (further) constraints on this element Element id MessageHeader.focus.display Short description Text alternative for the resource Definition Plain text narrative that identifies the resource in addition to the resource reference. Comments This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it. Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a rim: N/A
definition	Σ	0..0	canonical(MessageDefinition)	There are no (further) constraints on this element Element id MessageHeader.definition Short description Link to the definition for this message Definition Link permanente para o MessageDefinition da mensagem. Requirements Allows sender to define the expected contents of the message. Comments see Canonical References Data type canonical(MessageDefinition) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a rim: Not directly supported.

Binding

Binding do FHIR Required

Path	Strength	ValueSet
MessageHeader.response.code	required	ResponseType

Identifiers Type

Estes Identificadores devem ser utilizados no elemento

identifier.type.coding[*]

Regras de implementação

Para além das constraints identificadas pelo FHIR para este recurso devem ser consideradas as constraints que identificamos na tabela infra.

Voltar ao início