Implementation Guide for Portuguese Use Cases

Pesquisa de Informação da Vacina

A figura seguinte corresponde uma sistematização dos artefactos de interoperabilidade relevantes para a secção das Vacinas do Patient Summary. A operação em análise corresponde à Pesquisa da Vacina. A mensagem enviada (representada por Input Message) contém informação dos recursos: Bundle, MessageHeader, Parameters, Practitioner e Organization. A mensagem de retorno (representada por Output Message) contém informação dos recursos Bundle, MessageHeader, OperationOutcome, Parameters e Organization. Em cada recurso identificam-se os value set relevantes para propósitos de partilha de informação no contexto do Patient Summary. A amarelo-claro assinalam-se os value sets que não se encontram sob a gestão do Centro de Terminologias Clínicas (CTC), nos quais se incluem os value sets do FHIR com binding required. Os restantes value sets foram trabalhados no contexto do CTC. Os catálogos envolvidos nesta secção encontram-se assinalados a laranja e correspondem ao CPARADM, CPARC, CPARM e CPV.

Profiles

Profile	Description
BundlePTTRV profile	O recurso Bundle é o container que agrega os diversos recursos que compõem a mensagem.
MessageHeaderPTTRV profile	O recurso MessageHeader corresponde ao cabeçalho que possibilita a identificação da origem e destino da mensagem.
MessageHeaderPTTRVEXE profile	O recurso MessageHeader corresponde ao cabeçalho que possibilita a identificação da origem e destino da mensagem.
OperationOutcomePTTRV profile	O recurso OperationOutcome é utilizado como o resultado de uma operação, onde são identificadas as mensagens de erro, aviso e informações detalhadas sobre o resultado da tentativa de comunicação entre sistemas.
OrganizationPTTRV profile	O recurso Organization caracteriza de forma abrangente uma entidade. A definição transversal deste recurso permite, assim, a existência de uma visão única relativamente aos atributos que o caracterizam e que se afiguram como relevantes no âmbito da partilha de informação entre sistemas. Este recurso é caracterizado por relações hierárquica de entidades. No contexto da caracteriação de entidades de saúde, a informação do recurso Organization deve estar de acordo com a informação definida no provedor nacional de entidades de saúde.
ParametersPTPSPINF profile	O recurso Parameter é utilizado para identificação de parâmetros de pesquisa ou retornar parâmetros em eventos messaging.
ParametersPTPSRINF profile	O recurso Parameter é utilizado para identificação de parâmetros de pesquisa ou retornar parâmetros em eventos messaging.
PractitionerPTPSSNC profile	O recurso Practitioner caracteriza de forma abrangente a totalidade dos profissionais de saúde, permitindo a existência de uma visão única relativamente aos atributos que o caracterizam e que se afiguram como relevantes no âmbito da partilha de informação entre sistemas. A nível nacional, consideram-se duas realidades: profissionais cujo exercício da profissão é regulado por uma ordem profissional e profissionais com profissões não reguladas por ordem profissional. O recurso Practitioner é utilizado para descrição geral do profissional, não abrangendo as funções que este desempenha em determinada entidade. A informação do recurso Practitioner deve estar de acordo com a informação definida no provedor nacional de profissionais de saúde.

Mensagem de Pesquisa de Informação da Vacina

A mensagem de pesquisa de informação da vacina é empacotada num Bundle cuja a composição é apresentada no esquema seguinte:

O recurso Bundle é o primeiro recurso utilizado na mensagem de pesquisa de informação. Utilizado para agrupar um conjunto de recursos que compõem a mensagem. Para mais informações sobre a implementação deste recurso, no contexto do presente caso de uso, consultar: BundlePTTRV profile

Bundle	I		Bundle	There are no (further) constraints on this element Element id Bundle Short description Contains a collection of resources Definition A container for a collection of resources. Data type Bundle Constraints bdl-7: FullUrl must be unique in a bundle, or else entries with the same fullUrl must have different meta.versionId (except in history bundles) `(type = 'history') or entry.where(fullUrl.exists()).select(fullUrl&resource.meta.versionId).isDistinct()` bdl-9: A document must have an identifier with a system and a value `type = 'document' implies (identifier.system.exists() and identifier.value.exists())` bdl-3: entry.request mandatory for batch/transaction/history, otherwise prohibited `entry.all(request.exists() = (%resource.type = 'batch' or %resource.type = 'transaction' or %resource.type = 'history'))` bdl-4: entry.response mandatory for batch-response/transaction-response/history, otherwise prohibited `entry.all(response.exists() = (%resource.type = 'batch-response' or %resource.type = 'transaction-response' or %resource.type = 'history'))` bdl-12: A message must have a MessageHeader as the first resource `type = 'message' implies entry.first().resource.is(MessageHeader)` bdl-1: total only when a search or history `total.empty() or (type = 'searchset') or (type = 'history')` bdl-2: entry.search only when a search `entry.search.empty() or (type = 'searchset')` bdl-11: A document must have a Composition as the first resource `type = 'document' implies entry.first().resource.is(Composition)` bdl-10: A document must have a date `type = 'document' implies (timestamp.hasValue())` Mappings rim: Entity. Role, or Act v2: N/A rim: N/A cda: ClinicalDocument, if bundle.type = document w5: infrastructure.structure
id	Σ	1..1	id	There are no (further) constraints on this element Element id Bundle.id Short description Logical id of this artifact Definition The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes. Comments The only time that a resource does not have an id is when it is being submitted to the server using a create operation. Data type id
meta	Σ	0..1	Meta PT Core	Element id Bundle.meta Short description Metadata about the resource Definition Metadados do recurso. Data type Meta PT Core Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a rim: N/A
id		0..0	id	There are no (further) constraints on this element Element id Bundle.meta.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type id Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Bundle.meta.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
versionId	Σ	0..1	id	There are no (further) constraints on this element Element id Bundle.meta.versionId Short description Version specific identifier Definition The version specific identifier, as it appears in the version portion of the URL. This value changes when the resource is created, updated, or deleted. Comments The server assigns this value, and ignores what the client specifies, except in the case that the server is imposing version integrity on updates/deletes. Data type id Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a
lastUpdated	Σ	0..1	instant	There are no (further) constraints on this element Element id Bundle.meta.lastUpdated Short description When the resource version last changed Definition When the resource last changed - e.g. when the version changed. Comments This value is always populated except when the resource is first being created. The server / resource manager sets this value; what a client provides is irrelevant. This is equivalent to the HTTP Last-Modified and SHOULD have the same value on a read interaction. Data type instant Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a
source	Σ	0..0	uri	There are no (further) constraints on this element Element id Bundle.meta.source Short description Identifies where the resource comes from Definition A uri that identifies the source system of the resource. This provides a minimal amount of Provenance information that can be used to track or differentiate the source of information in the resource. The source may identify another FHIR server, document, message, database, etc. Comments In the provenance resource, this corresponds to Provenance.entity.what[x]. The exact use of the source (and the implied Provenance.entity.role) is left to implementer discretion. Only one nominated source is allowed; for additional provenance details, a full Provenance resource should be used. This element can be used to indicate where the current master source of a resource that has a canonical URL if the resource is no longer hosted at the canonical URL. Data type uri Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a
profile	Σ	0..1	canonical(StructureDefinition)	There are no (further) constraints on this element Element id Bundle.meta.profile Short description Profiles this resource claims to conform to Definition A list of profiles (references to StructureDefinition resources) that this resource claims to conform to. The URL is a reference to StructureDefinition.url. Comments It is up to the server and/or other infrastructure of policy to determine whether/how these claims are verified and/or updated over time. The list of profile URLs is a set. Data type canonical(StructureDefinition) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a
security	Σ	0..0	CodingBinding	There are no (further) constraints on this element Element id Bundle.meta.security Short description Security Labels applied to this resource Definition Security labels applied to this resource. These tags connect specific resources to the overall security policy and infrastructure. Comments The security labels can be updated without changing the stated version of the resource. The list of security labels is a set. Uniqueness is based the system/code, and version and display are ignored. Data type Coding Binding SecurityLabels (extensible) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim: CV orim: fhir:Coding rdfs:subClassOf dt:CDCoding
tag	Σ	0..0	Coding	There are no (further) constraints on this element Element id Bundle.meta.tag Short description Tags applied to this resource Definition Tags applied to this resource. Tags are intended to be used to identify and relate resources to process and workflow, and applications are not required to consider the tags when interpreting the meaning of a resource. Comments The tags can be updated without changing the stated version of the resource. The list of tags is a set. Uniqueness is based the system/code, and version and display are ignored. Data type Coding Binding Common Tags (example) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim: CV orim: fhir:Coding rdfs:subClassOf dt:CDCoding
implicitRules	Σ ?!	0..1	uri	There are no (further) constraints on this element Element id Bundle.implicitRules Short description A set of rules under which this content was created Definition A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc. Comments Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc. Data type uri Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a
language		0..1	codeBinding	There are no (further) constraints on this element Element id Bundle.language Short description Language of the resource content Definition The base language in which the resource is written. Comments Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute). Data type code Binding IETF language tag Common Languages (preferred) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a
identifier	Σ	0..1	Extension Identifier PT Core	There are no (further) constraints on this element Element id Bundle.identifier Short description Persistent identifier for the bundle Definition A persistent identifier for the bundle that won't change as a bundle is copied from server to server. Comments Persistent identity generally only matters for batches of type Document, Message, and Collection. It would not normally be populated for search and history results and servers ignore Bundle.identifier when processing batches and transactions. For Documents the .identifier SHALL be populated such that the .identifier is globally unique. Data type Extension Identifier PT Core Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CX / EI (occasionally, more often EI maps to a resource id or a URL) rim: II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd: Identifier w5: FiveWs.identifier cda: ClinicalDocument.id
id		0..1	id	There are no (further) constraints on this element Element id Bundle.identifier.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type id Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Bundle.identifier.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
use	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element id Bundle.identifier.use Short description usual \| official \| temp \| secondary \| old (If known) Definition Propósito do identificador: official: O identificador considerado mais fiável para a identificação do item. temp: Um identificador temporário. secondary: Um identificador que foi atribuído para identificar o item em um contexto relativo, mas não pode usado em um contexto diferente. old: O identificador já não é considerado válido, mas pode ser relevante para fins de pesquisa. Requirements Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. Comments Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. Data type code Binding IdentifierUse (required) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: N/A rim: Role.code or implied by context
type	Σ	0..1	CodeableConcept PT CoreBinding	There are no (further) constraints on this element Element id Bundle.identifier.type Short description Concept - reference to a terminology or just text Definition A concept that may be defined by a formal reference to a terminology or ontology or may be provided by text. Requirements Allows users to make use of identifiers when the identifier system is not known. Comments Value Set: ExtensionIdentifierType Data type CodeableConcept PT Core Binding Extension Identifier Type (extensible) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD v2: CX.5 rim: Role.code or implied by context
system	Σ	0..1	uri	There are no (further) constraints on this element Element id Bundle.identifier.system Short description The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique. Requirements There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. Comments Para sistemas geridos pela SPMS o system tem de seguir a seguinte estrutura: http://spms.min-saude.pt/<sistema>/identifiers/<identifier-id> Data type uri Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Examples General http://www.acme.com/identifiers/patient Mappings rim: n/a v2: CX.4 / EI-2-4 rim: II.root or Role.id.root servd: ./IdentifierType
value	Σ	1..1	string	There are no (further) constraints on this element Element id Bundle.identifier.value Short description The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system. Comments If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Examples General 123456 Mappings rim: n/a v2: CX.1 / EI.1 rim: II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd: ./Value
period	Σ I	0..1	Period PT Core	There are no (further) constraints on this element Element id Bundle.identifier.period Short description Time range defined by start and end date/time Alternate names Period Definition A time period defined by a start and end date and optionally time. Comments A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration. Data type Period PT Core Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` per-1: If present, start SHALL have a lower value than end `start.hasValue().not() or end.hasValue().not() or (start <= end)` Mappings rim: n/a v2: DR rim: IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"] v2: CX.7 + CX.8 rim: Role.effectiveTime or implied by context servd: ./StartDate and ./EndDate
assigner	Σ I	0..0	Reference(Organization PT Core)	There are no (further) constraints on this element Element id Bundle.identifier.assigner Short description Organization that issued id (may be just text) Definition Organization that issued/manages the identifier. Comments The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. Data type Reference(Organization PT Core) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')) or (reference='#' and %rootResource!=%resource)` Mappings rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2: CX.4 / (CX.4,CX.9,CX.10) rim: II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd: ./IdentifierIssuingAuthority
type	Σ	1..1	codeBinding	There are no (further) constraints on this element Element id Bundle.type Short description document \| message \| transaction \| transaction-response \| batch \| batch-response \| history \| searchset \| collection Definition Obrigatório a identificação de um dos seguintes códigos: “document” - O Bundle é do tipo documento. O primeiro recurso é o Composition. “message” - O Bundle é do tipo mensagem. O primeiro recurso é o MessageHeader. “transaction” - O Bundle do tipo transação. “transaction-response” - O Bundle é uma resposta a uma mensagem com tipo de Bundle transaction. “batch” - O Bundle é um conjunto de ações. “batch-response” - O Bundle é uma resposta a uma mensagem com tipo de Bundle batch. “history” - O Bundle é uma lista de recursos referente a uma interação de dados históricos. “searchset”- O Bundle é uma lista de resultados de uma pesquisa. “collection” - O Bundle é um conjunto de recursos agrupados num único pacote. Comments It's possible to use a bundle for other purposes (e.g. a document can be accepted as a transaction). This is primarily defined so that there can be specific rules for some of the bundle types. Data type code Binding Indicates the purpose of a bundle - how it is intended to be used. BundleType (required) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a w5: FiveWs.class
timestamp	Σ	0..1	instant	Element id Bundle.timestamp Short description When the bundle was assembled Definition No caso de Bundle.Type: "message", corresponde à data em que o conteúdo da mensagem foi criado. Comments For many bundles, the timestamp is equal to .meta.lastUpdated, because they are not stored (e.g. search results). When a bundle is placed in a persistent store, .meta.lastUpdated will be usually be changed by the server. When the bundle is a message, a middleware agent altering the message (even if not stored) SHOULD update .meta.lastUpdated. .timestamp is used to track the original time of the Bundle, and SHOULD be populated. Usage: document : the date the document was created. Note: the composition may predate the document, or be associated with multiple documents. The date of the composition - the authoring time - may be earlier than the document assembly time message : the date that the content of the message was assembled. This date is not changed by middleware engines unless they add additional data that changes the meaning of the time of the message history : the date that the history was assembled. This time would be used as the _since time to ask for subsequent updates searchset : the time that the search set was assembled. Note that different pages MAY have different timestamps but need not. Having different timestamps does not imply that subsequent pages will represent or include changes made since the initial query transaction \| transaction-response \| batch \| batch-response \| collection : no particular assigned meaning The timestamp value should be greater than the lastUpdated and other timestamps in the resources in the bundle, and it should be equal or earlier than the .meta.lastUpdated on the Bundle itself. Data type instant Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a w5: FiveWs.init cda: ClinicalDocument.effectiveTime
total	Σ I	0..0	unsignedInt	There are no (further) constraints on this element Element id Bundle.total Short description If search, the total number of matches Definition Usado apenas no caso do Bundle.Type com valor search ou history. Comments Only used if the bundle is a search result set. The total does not include resources such as OperationOutcome and included resources, only the total number of matching resources. Data type unsignedInt Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a
link	Σ	0..0	BackboneElement	There are no (further) constraints on this element Element id Bundle.link Short description Links related to this Bundle Definition Lista de links relacionados com o bundle Comments Both Bundle.link and Bundle.entry.link are defined to support providing additional context when Bundles are used (e.g. HATEOAS). Bundle.entry.link corresponds to links found in the HTTP header if the resource in the entry was read directly. This specification defines some specific uses of Bundle.link for searching and paging, but no specific uses for Bundle.entry.link, and no defined function in a transaction - the meaning is implementation specific. Data type BackboneElement Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a
entry	Σ I	0..*	BackboneElement	There are no (further) constraints on this element Element id Bundle.entry Short description Entry in the bundle - will have a resource or information Definition An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only). Data type BackboneElement Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` bdl-8: fullUrl cannot be a version specific reference `fullUrl.exists() implies fullUrl.contains('/_history/').not()` bdl-5: must be a resource unless there's a request or response `resource.exists() or request.exists() or response.exists()` Mappings rim: n/a
id		0..0	id	There are no (further) constraints on this element Element id Bundle.entry.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type id Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Bundle.entry.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id Bundle.entry.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
link	Σ	0..0	see (link)	There are no (further) constraints on this element Element id Bundle.entry.link Short description Links related to this entry Definition Lista de links relacionados com a entrada
fullUrl	Σ	0..1	uri	There are no (further) constraints on this element Element id Bundle.entry.fullUrl Short description URI for resource (Absolute URL server address or URI for UUID/OID) Definition The Absolute URL for the resource. The fullUrl SHALL NOT disagree with the id in the resource - i.e. if the fullUrl is not a urn:uuid, the URL shall be version-independent URL consistent with the Resource.id. The fullUrl is a version independent reference to the resource. The fullUrl element SHALL have a value except that: fullUrl can be empty on a POST (although it does not need to when specifying a temporary id for reference in the bundle) Results from operations might involve resources that are not identified. Comments fullUrl might not be unique in the context of a resource. Note that since FHIR resources do not need to be served through the FHIR API, the fullURL might be a URN or an absolute URL that does not end with the logical id of the resource (Resource.id). However, but if the fullUrl does look like a RESTful server URL (e.g. meets the regex, then the 'id' portion of the fullUrl SHALL end with the Resource.id. Note that the fullUrl is not the same as the canonical URL - it's an absolute url for an endpoint serving the resource (these will happen to have the same value on the canonical server for the resource with the canonical URL). Data type uri Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a
resource	Σ	0..1	Resource	There are no (further) constraints on this element Element id Bundle.entry.resource Short description A resource in the bundle Definition Recurso referenciado pelo Bundle, respeitando as regras da entry. Data type Resource Mappings rim: Entity. Role, or Act
search	Σ I	0..1	BackboneElement	There are no (further) constraints on this element Element id Bundle.entry.search Short description Search related information Definition Information about the search process that lead to the creation of this entry. Data type BackboneElement Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a
id		0..1	id	There are no (further) constraints on this element Element id Bundle.entry.search.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type id Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Bundle.entry.search.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id Bundle.entry.search.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
mode	Σ	0..1	codeBinding	There are no (further) constraints on this element Element id Bundle.entry.search.mode Short description match \| include \| outcome - why this is in the result set Definition Why this entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process. Comments There is only one mode. In some corner cases, a resource may be included because it is both a match and an include. In these circumstances, 'match' takes precedence. Data type code Binding Why an entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process. SearchEntryMode (required) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a
score	Σ	0..1	decimal	There are no (further) constraints on this element Element id Bundle.entry.search.score Short description Search ranking (between 0 and 1) Definition When searching, the server's search ranking score for the entry. Comments Servers are not required to return a ranking score. 1 is most relevant, and 0 is least relevant. Often, search results are sorted by score, but the client may specify a different sort order. See Patient Match for the EMPI search which relates to this element. Data type decimal Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a
request	Σ I	0..0	BackboneElement	There are no (further) constraints on this element Element id Bundle.entry.request Short description Additional execution information (transaction/batch/history) Definition Additional information about how this entry should be processed as part of a transaction or batch. For history, it shows how the entry was processed to create the version contained in the entry. Data type BackboneElement Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a
response	Σ I	0..0	BackboneElement	There are no (further) constraints on this element Element id Bundle.entry.response Short description Results of execution (transaction/batch/history) Definition Indicates the results of processing the corresponding 'request' entry in the batch or transaction being responded to or what the results of an operation where when returning history. Data type BackboneElement Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a
signature	Σ	0..0	Signature	There are no (further) constraints on this element Element id Bundle.signature Short description Digital Signature Definition Assinatura digital Requirements A Signature holds an electronic representation of a signature and its supporting context in a FHIR accessible form. The signature may either be a cryptographic type (XML DigSig or a JWS), which is able to provide non-repudiation proof, or it may be a graphical image that represents a signature or a signature process. This element allows capturing signatures on documents, messages, transactions or even search responses, to support content-authentication, non-repudiation or other business cases. This is primarily relevant where the bundle may travel through multiple hops or via other mechanisms where HTTPS non-repudiation is insufficient. Comments The signature could be created by the "author" of the bundle or by the originating device. Requirements around inclusion of a signature, verification of signatures and treatment of signed/non-signed bundles is implementation-environment specific. Data type Signature Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a rim: N/A

O recurso MessageHeader é a primeira entrada do recurso Bundle (Bundle.entry.fullUrl) e contêm os detalhes do cabeçalho da mensagem. Para mais informações sobre a implementação deste recurso, no contexto do presente caso de uso, consultar: MessageHeaderPTTRVEXE profile

MessageHeader	I		MessageHeader	There are no (further) constraints on this element Element id MessageHeader Short description A resource that describes a message that is exchanged between systems Definition The header for a message exchange that is either requesting or responding to an action. The reference(s) that are the subject of the action as well as other information related to the action are typically transmitted in a bundle in which the MessageHeader resource instance is the first resource in the bundle. Data type MessageHeader Constraints dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources `contained.contained.empty()` dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated `contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()` dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource `contained.where(((id.exists() and ('#'+id in (%resource.descendants().reference \| %resource.descendants().as(canonical) \| %resource.descendants().as(uri) \| %resource.descendants().as(url)))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(uri) = '#').exists()).not()).trace('unmatched', id).empty()` dom-6: A resource should have narrative for robust management text.`div`.exists() dom-5: If a resource is contained in another resource, it SHALL NOT have a security label `contained.meta.security.empty()` Mappings rim: Entity. Role, or Act v2: MSH / MSA / ERR rim: Message w5: infrastructure.exchange
id	Σ	1..1	id	There are no (further) constraints on this element Element id MessageHeader.id Short description Logical id of this artifact Definition The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes. Comments The only time that a resource does not have an id is when it is being submitted to the server using a create operation. Data type id
meta	Σ	0..1	Meta PT Core	There are no (further) constraints on this element Element id MessageHeader.meta Short description Metadata about the resource Definition The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource. Data type Meta PT Core Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a rim: N/A
implicitRules	Σ ?!	0..1	uri	There are no (further) constraints on this element Element id MessageHeader.implicitRules Short description A set of rules under which this content was created Definition A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc. Comments Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc. Data type uri Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a
language		0..1	codeBinding	There are no (further) constraints on this element Element id MessageHeader.language Short description Language of the resource content Definition The base language in which the resource is written. Comments Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute). Data type code Binding IETF language tag Common Languages (preferred) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a
text		0..1	Narrative	There are no (further) constraints on this element Element id MessageHeader.text Short description Text summary of the resource, for human interpretation Alternate names narrative, html, xhtml, display Definition A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety. Comments Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later. Data type Narrative Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a rim: N/A rim: Act.text?
contained	I	0..0	Resource	There are no (further) constraints on this element Element id MessageHeader.contained Short description Contained, inline Resources Alternate names inline resources, anonymous resources, contained resources Definition These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope. Comments This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels. Data type Resource Constraints dom-r4b: Containing new R4B resources within R4 resources may cause interoperability issues if instances are shared with R4 systems ($this is Citation or $this is Evidence or $this is EvidenceReport or $this is EvidenceVariable or $this is MedicinalProductDefinition or $this is PackagedProductDefinition or $this is AdministrableProductDefinition or $this is Ingredient or $this is ClinicalUseDefinition or $this is RegulatedAuthorization or $this is SubstanceDefinition or $this is SubscriptionStatus or $this is SubscriptionTopic) implies (%resource is Citation or %resource is Evidence or %resource is EvidenceReport or %resource is EvidenceVariable or %resource is MedicinalProductDefinition or %resource is PackagedProductDefinition or %resource is AdministrableProductDefinition or %resource is Ingredient or %resource is ClinicalUseDefinition or %resource is RegulatedAuthorization or %resource is SubstanceDefinition or %resource is SubscriptionStatus or %resource is SubscriptionTopic) Mappings rim: Entity. Role, or Act rim: N/A
extension	I	0..*	Extension	There are no (further) constraints on this element Element id MessageHeader.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	?! I	0..*	Extension	There are no (further) constraints on this element Element id MessageHeader.modifierExtension Short description Extensions that cannot be ignored Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
event[x]	Σ	1..1		There are no (further) constraints on this element Element id MessageHeader.event[x] Short description Code for the event this message represents or link to event definition Definition Código que identifica o evento que esta mensagem representa e o liga à sua definição. Requirements Drives the behavior associated with this message. Comments The time of the event will be found in the focus resource. The time of the message will be found in Bundle.timestamp. Binding One of the message events defined as part of this version of FHIR. MessageEvent (example) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a w5: FiveWs.what[x] v2: MSH-9.2 rim: ./payload[classCode="CACT" and moodCode="EVN" and isNormalAct()]/code[isNormalDatatype()]/code
eventCoding			Coding	There are no (further) constraints on this element Data type Coding
eventUri			uri	There are no (further) constraints on this element Data type uri
destination	Σ	1..*	BackboneElement	There are no (further) constraints on this element Element id MessageHeader.destination Short description Message destination application(s) Definition Aplicativo(s) de destino de mensagem. Requirements Indicates where message is to be sent for routing purposes. Allows verification of "am I the intended recipient". Comments There SHOULD be at least one destination, but in some circumstances, the source system is unaware of any particular destination system. Data type BackboneElement Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a w5: FiveWs.subject[x] rim: ./communicationFunction[typeCode="RCV"] w5: FiveWs.subject
id		0..0	id	There are no (further) constraints on this element Element id MessageHeader.destination.id Short description Unique id for inter-element referencing Definition ID único para o elemento num recurso (para referências internas). Pode ser qualquer valor de cadeia que não contenha espaços. Data type id Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id MessageHeader.destination.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id MessageHeader.destination.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
name	Σ	0..1	string	There are no (further) constraints on this element Element id MessageHeader.destination.name Short description Name of system Definition Nome da aplicação destino. Requirements May be used for routing of response and/or to support audit. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: MSH-5 rim: unique(./entity[determinerCode="INST" and (classCode=("DEV", "PSN", "ORG"]/name[type='ST' and isNormalDatatype()])
target	Σ I	0..0	Reference(Device PT Core)	There are no (further) constraints on this element Element id MessageHeader.destination.target Short description Particular delivery destination within the destination Definition Referenciar para o recurso Device, no caso o destino seja um dispositivo. Requirements Supports multi-hop routing. Comments References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository. Data type Reference(Device PT Core) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')) or (reference='#' and %rootResource!=%resource)` Mappings rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity) rim: unique(./entity[determinerCode="INST" and (classCode=("DEV", "PSN", "ORG"]
endpoint	Σ	1..1	url	Element id MessageHeader.destination.endpoint Short description Actual destination address or id Definition Endereço ou id do destino da mensagem. Requirements Identifies where to route the message. Comments The id may be a non-resolvable URI for systems that do not use standard network-based addresses. Data type url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: MSH-25 (or MSH-6) rim: ./telecom
receiver	Σ I	1..1	Reference(Organization PT TRV)	Element id MessageHeader.destination.receiver Short description Intended "real-world" recipient for the data Definition Entidade que vai receber os dados. Requirements Allows routing beyond just the application level. Comments References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository. Data type Reference(Organization PT TRV) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')) or (reference='#' and %rootResource!=%resource)` Mappings rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity) w5: FiveWs.subject[x] v2: PRT-5:PRT-4='WAYR' / PRT-8:PRT-4='WAYR' rim: Not directly supported. Could be shared using attentionLine.value with an appropriate keyWordText w5: FiveWs.subject
sender	Σ I	1..1	Reference(Organization PT TRV)	Element id MessageHeader.sender Short description Real world sender of the message Definition Entidade que envia os dados. Requirements Allows routing beyond just the application level. Comments Use case is for where a (trusted) sending system is responsible for multiple organizations, and therefore cannot differentiate based on source endpoint / authentication alone. Data type Reference(Organization PT TRV) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')) or (reference='#' and %rootResource!=%resource)` Mappings rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity) w5: FiveWs.subject[x] v2: PRT-5:PRT-4='WAYR' / PRT-8:PRT-4='WAYR' rim: Not directly supported. Could be shared using attentionLine.value with an appropriate keyWordText w5: FiveWs.subject
enterer	Σ I	1..1	Reference(Practitioner PT PS SNC)	Element id MessageHeader.enterer Short description The source of the data entry Definition Profissional que faz o pedido Requirements Need to know for audit/traceback requirements and possibly for authorization. Comments Usually only for the request but can be used in a response. Data type Reference(Practitioner PT PS SNC) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')) or (reference='#' and %rootResource!=%resource)` Mappings rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity) w5: FiveWs.author v2: EVN-5 / ORC-10 / PRT-5:PRT-4='EP' / ROL where ROL.3 is EP or ORC.10 rim: unique(./controlAct[classCode="CACT" and classCode="EVN" and isNormalAct()]/participation[typeCode="ENT" and isNormalParticipation]/role[classCode="ASSIGNED" and isNormalRole()]/player[isNormalEntity() and classCode=("DEV", "PSN") and determinerCode="INST"])
author	Σ I	0..0	Reference(Practitioner PT Core \| PractitionerRole PT Core)	There are no (further) constraints on this element Element id MessageHeader.author Short description The source of the decision Definition Profissional que autorizou o envio dos dados Requirements Need to know for audit/traceback requirements and possibly for authorization. Comments Usually only for the request but can be used in a response. Data type Reference(Practitioner PT Core \| PractitionerRole PT Core) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')) or (reference='#' and %rootResource!=%resource)` Mappings rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity) w5: FiveWs.author v2: ORC-19 / PRT-5:PRT-4='AUT' / ROL where ROL.3 is IP or ORC.12 rim: unique(./controlAct[classCode="CACT" and classCode="EVN" and isNormalAct()]/participation[isHighest(priorityCode) and typeCode="AUT" and isNormalParticipation]/role[classCode="ASSIGNED" and isNormalRole()]/player[isNormalEntity() and classCode=("DEV", "PSN") and determinerCode="INST"])
source	Σ	1..1	BackboneElement	There are no (further) constraints on this element Element id MessageHeader.source Short description Message source application Definition Aplicativo de origem de mensagens Requirements Allows replies, supports audit. Data type BackboneElement Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a w5: FiveWs.actor rim: unique(./communicationFunction[typeCode="SND"])
id		0..0	id	There are no (further) constraints on this element Element id MessageHeader.source.id Short description Unique id for inter-element referencing Definition ID único para o elemento num recurso (para referências internas). Pode ser qualquer valor de cadeia que não contenha espaços. Data type id Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id MessageHeader.source.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id MessageHeader.source.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
name	Σ	0..1	string	Element id MessageHeader.source.name Short description Name of system Definition Nome da aplicação origem dos dados. Requirements May be used to support audit. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: MSH-3 rim: unique(./entity[determinerCode="INST" and classCode="DEV"]/name[type='ST' and isNormalDatatype()])
software	Σ	0..0	string	There are no (further) constraints on this element Element id MessageHeader.source.software Short description Name of software running the system Definition Configuração ou outras informações úteis da aplicação origem Requirements Supports audit and possibly interface engine behavior. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: SFT-3 ( +SFT-1) rim: unique(./entity[determinerCode="INST" and classCode="DEV"]/softwareName[isNormalDatatype()])
version	Σ	0..0	string	There are no (further) constraints on this element Element id MessageHeader.source.version Short description Version of software running Definition Versão da aplicação origem Requirements Supports audit and possibly interface engine behavior. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: SFT-2 rim: (Not supported)
contact	Σ I	0..0	ContactPoint PT Core	There are no (further) constraints on this element Element id MessageHeader.source.contact Short description Details of a Technology mediated contact point (phone, fax, email, etc.) Definition Contacto para suporte, no âmbito das comunicações de mensagens Requirements Allows escalation of technical issues. Data type ContactPoint PT Core Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` cpt-2: A system is required if a value is provided. `value.empty() or system.exists()` Mappings rim: n/a v2: XTN rim: TEL servd: ContactPoint v2: (MSH-22?) rim: unique(./entity[determinerCode="INST" and classCode="DEV"]/scopesRole[normalRole() and classCode="CON" and layer[classCode="PSN"]/telecom[isNormalDatatype()])
endpoint	Σ	1..1	url	Element id MessageHeader.source.endpoint Short description Actual message source address or id Definition Endereço ou id da origem da mensagem. Requirements Identifies where to send responses, may influence security permissions. Comments The id may be a non-resolvable URI for systems that do not use standard network-based addresses. Data type url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: MSH-24 rim: ./telecom[isNormalDatatype()]
responsible	Σ I	0..0	Reference(Practitioner PT Core \| PractitionerRole PT Core \| Organization PT Core)	There are no (further) constraints on this element Element id MessageHeader.responsible Short description Final responsibility for event Definition Entidade ou profissional com a responsabilidade final pelo evento Requirements Need to know for audit/traceback requirements and possibly for authorization. Comments Usually only for the request but can be used in a response. Data type Reference(Practitioner PT Core \| PractitionerRole PT Core \| Organization PT Core) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')) or (reference='#' and %rootResource!=%resource)` Mappings rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity) w5: FiveWs.witness v2: ORC-12 / PRT-5:PRT-4='OP' / PRT-8:PRT-4='OP' / ROL where ROL.3 is RO or ORC.11 rim: unique(./controlAct[classCode="CACT" and classCode="EVN" and isNormalAct()]/participation[isHighest(priorityCode) and typeCode="RESP" and isNormalParticipation]/role[classCode="ASSIGNED" and isNormalRole()]/player[isNormalEntity() and classCode="PSN" and determinerCode="INST"] or ./controlAct[classCode="CACT" and classCode="EVN" and isNormalAct()]/participation[isHighest(priorityCode) and typeCode="RESP" and isNormalParticipation]/role[classCode="ASSIGNED" and isNormalRole()]/scoper[isNormalEntity() and classCode="ORG" and determinerCode="INST"])
reason	Σ	0..0	CodeableConcept PT Core	There are no (further) constraints on this element Element id MessageHeader.reason Short description Concept - reference to a terminology or just text Definition Indica o motivo da ocorrência do evento que é foco desta mensagem. Requirements Need to be able to track why resources are being changed and report in the audit log/history of the resource. May affect authorization. Comments Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination. Data type CodeableConcept PT Core Binding Reason for event occurrence. Example Message Reason Codes (example) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD w5: FiveWs.why[x] v2: EVN.4 / ORC.16 / OBR-31-reason for study / BPO-13-BP indication for use / RXO-20-indication / RXE-27-give indication / RXD-21-indication / RXG-22-indication / RXA-19-indication rim: unique(./controlAct[classCode="CACT" and classCode="EVN" and isNormalAct()]/reasonCode[isNormalDatatype()])
response	Σ	0..1	BackboneElement	There are no (further) constraints on this element Element id MessageHeader.response Short description If this is a reply to prior message Definition Elemento usado no caso de mensagem de resposta Data type BackboneElement Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: MSA rim: ./conveyedAcknowledgement
id		0..0	id	There are no (further) constraints on this element Element id MessageHeader.response.id Short description Unique id for inter-element referencing Definition ID único para o elemento num recurso (para referências internas). Pode ser qualquer valor de cadeia que não contenha espaços. Data type id Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id MessageHeader.response.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id MessageHeader.response.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
identifier	Σ	1..1	id	Element id MessageHeader.response.identifier Short description Id of original message Definition id da mensagem origem enviada que deu origem à resposta. Requirements Allows receiver to know what message is being responded to. Comments RFC 4122 Data type id Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: MSA-2 rim: ./acknowledges.id[isNormalDatatype()]
code	Σ	1..1	codeBinding	Element id MessageHeader.response.code Short description ok \| transient-error \| fatal-error Definition Code that identifies the type of response to the message - whether it was successful or not, and whether it should be resent or not. Requirements Allows the sender of the acknowledge message to know if the request was successful or if action is needed. Comments This is a generic response to the request message. Specific data for the response will be found in MessageHeader.focus. Data type code Binding The kind of response to a message. ResponseType (required) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: MSA-1 rim: ./typeCode[isNormalDatatype()]
details	Σ I	0..1	Reference(OperationOutcome PT TRV)	Element id MessageHeader.response.details Short description Specific list of hints/warnings/errors Definition Detalhes do erro da mensagem. Em caso de code com valor “transient-error” ou “fatal-erro”, referenciar o recurso com os detalhes dos erros ou alertas. Requirements Allows the sender of the message to determine what the specific issues are. Comments This SHALL be contained in the bundle. If any of the issues are errors, the response code SHALL be an error. Data type Reference(OperationOutcome PT TRV) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')) or (reference='#' and %rootResource!=%resource)` Mappings rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2: ERR rim: AcknowledgementDetail or Observation[classCode="ALRT" and moodCode="EVN"]
focus	Σ I	0..*	Reference(Resource)	Element id MessageHeader.focus Short description The actual content of the message Definition Referenciar o(s) recurso(s) raiz da mensagem. Requirements Every message event is about actual data, a single resource, that is identified in the definition of the event, and perhaps some or all linked resources. Comments The data is defined where the transaction type is defined. The transaction data is always included in the bundle that is the full message. Only the root resource is specified. The resources it references should be contained in the bundle but are not also listed here. Multiple repetitions are allowed to cater for merges and other situations with multiple focal targets. Data type Reference(Resource) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')) or (reference='#' and %rootResource!=%resource)` Mappings rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity) rim: unique(./controlAct[classCode="CACT" and classCode="EVN" and isNormalAct()]/participation[typeCode="SUBJ" and isNormalParticipation]/role or ./controlAct[classCode="CACT" and classCode="EVN" and isNormalAct()]/outboundRelationship[typeCode="SBJ" and isNormalActRelatoinship]/target)
id		0..1	id	There are no (further) constraints on this element Element id MessageHeader.focus.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type id Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id MessageHeader.focus.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
reference	Σ I	0..1	string	There are no (further) constraints on this element Element id MessageHeader.focus.reference Short description Literal reference, Relative, internal or absolute URL Definition A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources. Comments Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server. Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a rim: N/A
type	Σ	0..1	uriBinding	Element id MessageHeader.focus.type Short description Type the reference refers to (e.g. "Patient") Definition The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent. The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources). Comments This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified. Data type uri Binding ResourceType (extensible) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a rim: N/A
identifier	Σ	0..1	Identifier	There are no (further) constraints on this element Element id MessageHeader.focus.identifier Short description Logical reference, when literal reference is not known Definition An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference. Comments When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it. Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation\|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any). Data type Identifier Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CX / EI (occasionally, more often EI maps to a resource id or a URL) rim: II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd: Identifier rim: .identifier
display	Σ	0..1	string	There are no (further) constraints on this element Element id MessageHeader.focus.display Short description Text alternative for the resource Definition Plain text narrative that identifies the resource in addition to the resource reference. Comments This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it. Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a rim: N/A
definition	Σ	0..0	canonical(MessageDefinition)	There are no (further) constraints on this element Element id MessageHeader.definition Short description Link to the definition for this message Definition Link permanente para o MessageDefinition da mensagem. Requirements Allows sender to define the expected contents of the message. Comments see Canonical References Data type canonical(MessageDefinition) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a rim: Not directly supported.

O recurso Parameter é referenciado pelo recurso MessageHeader (MessageHeader.focus[])* e identifica os parametros da pesquisa. Para mais informações sobre a implementação deste recurso, no contexto do presente caso de uso, consultar: ParametersPTPSPINF profile

Parameters			Parameters	There are no (further) constraints on this element Element id Parameters Short description Operation Request or Response Definition This resource is a non-persisted resource used to pass information into and back from an operation. It has no other use, and there is no RESTful endpoint associated with it. Comments The parameters that may be used are defined by the OperationDefinition resource. Data type Parameters Mappings rim: Entity. Role, or Act v2: n/a rim: n/a w5: infrastructure.exchange
id	Σ	1..1	id	There are no (further) constraints on this element Element id Parameters.id Short description Logical id of this artifact Definition The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes. Comments The only time that a resource does not have an id is when it is being submitted to the server using a create operation. Data type id
meta	Σ	0..1	Meta	There are no (further) constraints on this element Element id Parameters.meta Short description Metadata about the resource Definition The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource. Data type Meta Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a rim: N/A
id		0..1	id	There are no (further) constraints on this element Element id Parameters.meta.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type id Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Parameters.meta.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
versionId	Σ	0..1	id	There are no (further) constraints on this element Element id Parameters.meta.versionId Short description Version specific identifier Definition The version specific identifier, as it appears in the version portion of the URL. This value changes when the resource is created, updated, or deleted. Comments The server assigns this value, and ignores what the client specifies, except in the case that the server is imposing version integrity on updates/deletes. Data type id Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a
lastUpdated	Σ	0..1	instant	There are no (further) constraints on this element Element id Parameters.meta.lastUpdated Short description When the resource version last changed Definition When the resource last changed - e.g. when the version changed. Comments This value is always populated except when the resource is first being created. The server / resource manager sets this value; what a client provides is irrelevant. This is equivalent to the HTTP Last-Modified and SHOULD have the same value on a read interaction. Data type instant Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a
source	Σ	0..1	uri	There are no (further) constraints on this element Element id Parameters.meta.source Short description Identifies where the resource comes from Definition A uri that identifies the source system of the resource. This provides a minimal amount of Provenance information that can be used to track or differentiate the source of information in the resource. The source may identify another FHIR server, document, message, database, etc. Comments In the provenance resource, this corresponds to Provenance.entity.what[x]. The exact use of the source (and the implied Provenance.entity.role) is left to implementer discretion. Only one nominated source is allowed; for additional provenance details, a full Provenance resource should be used. This element can be used to indicate where the current master source of a resource that has a canonical URL if the resource is no longer hosted at the canonical URL. Data type uri Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a
profile	Σ	0..*	canonical(StructureDefinition)Fixed Value	Element id Parameters.meta.profile Short description Profiles this resource claims to conform to Definition A list of profiles (references to StructureDefinition resources) that this resource claims to conform to. The URL is a reference to StructureDefinition.url. Comments It is up to the server and/or other infrastructure of policy to determine whether/how these claims are verified and/or updated over time. The list of profile URLs is a set. Data type canonical(StructureDefinition) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Fixed value https://spms.min-saude.pt/fhir-r4B/iop/StructureDefinition/ParametersPTPSPINF Mappings rim: n/a
security	Σ	0..*	CodingBinding	There are no (further) constraints on this element Element id Parameters.meta.security Short description Security Labels applied to this resource Definition Security labels applied to this resource. These tags connect specific resources to the overall security policy and infrastructure. Comments The security labels can be updated without changing the stated version of the resource. The list of security labels is a set. Uniqueness is based the system/code, and version and display are ignored. Data type Coding Binding SecurityLabels (extensible) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim: CV orim: fhir:Coding rdfs:subClassOf dt:CDCoding
tag	Σ	0..*	Coding	There are no (further) constraints on this element Element id Parameters.meta.tag Short description Tags applied to this resource Definition Tags applied to this resource. Tags are intended to be used to identify and relate resources to process and workflow, and applications are not required to consider the tags when interpreting the meaning of a resource. Comments The tags can be updated without changing the stated version of the resource. The list of tags is a set. Uniqueness is based the system/code, and version and display are ignored. Data type Coding Binding Common Tags (example) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim: CV orim: fhir:Coding rdfs:subClassOf dt:CDCoding
implicitRules	Σ ?!	0..1	uri	There are no (further) constraints on this element Element id Parameters.implicitRules Short description A set of rules under which this content was created Definition A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc. Comments Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc. Data type uri Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a
language		0..1	codeBinding	There are no (further) constraints on this element Element id Parameters.language Short description Language of the resource content Definition The base language in which the resource is written. Comments Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute). Data type code Binding IETF language tag Common Languages (preferred) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a
parameter	Σ I	0..*	BackboneElement	Element id Parameters.parameter Short description Operation Parameter Definition Identifica o parâmetro transmitido ou recebido durante a operação. Data type BackboneElement Sliced: Unordered, Closed, by name(Value) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` inv-1: A parameter must have one and only one of (value, resource, part) `(part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists()))` Mappings rim: n/a
(All Slices)				There are no (further) constraints on this element
id		0..1	id	There are no (further) constraints on this element Element id Parameters.parameter.id Short description Unique id for inter-element referencing Definition ID único para o elemento num recurso (para referências internas). Pode ser qualquer valor de cadeia que não contenha espaços. Data type id Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Parameters.parameter.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id Parameters.parameter.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
name	Σ	1..1	string	There are no (further) constraints on this element Element id Parameters.parameter.name Short description Name from the definition Definition Nome do parâmetro (em texto) Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a
value[x]	Σ I	0..1		There are no (further) constraints on this element Element id Parameters.parameter.value[x] Short description If parameter is a data type Definition Indicação do tipo de dados do parameter Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a
valueBase64Binary			base64Binary	There are no (further) constraints on this element Data type base64Binary
valueBoolean			boolean	There are no (further) constraints on this element Data type boolean
valueCanonical			canonical()	There are no (further) constraints on this element Data type canonical()
valueCode			code	There are no (further) constraints on this element Data type code
valueDate			date	There are no (further) constraints on this element Data type date
valueDateTime			dateTime	There are no (further) constraints on this element Data type dateTime
valueDecimal			decimal	There are no (further) constraints on this element Data type decimal
valueId			id	There are no (further) constraints on this element Data type id
valueInstant			instant	There are no (further) constraints on this element Data type instant
valueInteger			integer	There are no (further) constraints on this element Data type integer
valueMarkdown			markdown	There are no (further) constraints on this element Data type markdown
valueOid			oid	There are no (further) constraints on this element Data type oid
valuePositiveInt			positiveInt	There are no (further) constraints on this element Data type positiveInt
valueString			string	There are no (further) constraints on this element Data type string
valueTime			time	There are no (further) constraints on this element Data type time
valueUnsignedInt			unsignedInt	There are no (further) constraints on this element Data type unsignedInt
valueUri			uri	There are no (further) constraints on this element Data type uri
valueUrl			url	There are no (further) constraints on this element Data type url
valueUuid			uuid	There are no (further) constraints on this element Data type uuid
valueAddress			Address	There are no (further) constraints on this element Data type Address
valueAge			Age	There are no (further) constraints on this element Data type Age
valueAnnotation			Annotation	There are no (further) constraints on this element Data type Annotation
valueAttachment			Attachment	There are no (further) constraints on this element Data type Attachment
valueCodeableConcept			CodeableConcept	There are no (further) constraints on this element Data type CodeableConcept
valueCoding			Coding	There are no (further) constraints on this element Data type Coding
valueContactPoint			ContactPoint	There are no (further) constraints on this element Data type ContactPoint
valueCount			Count	There are no (further) constraints on this element Data type Count
valueDistance			Distance	There are no (further) constraints on this element Data type Distance
valueDuration			Duration	There are no (further) constraints on this element Data type Duration
valueHumanName			HumanName	There are no (further) constraints on this element Data type HumanName
valueIdentifier			Identifier	There are no (further) constraints on this element Data type Identifier
valueMoney			Money	There are no (further) constraints on this element Data type Money
valuePeriod			Period	There are no (further) constraints on this element Data type Period
valueQuantity			Quantity	There are no (further) constraints on this element Data type Quantity
valueRange			Range	There are no (further) constraints on this element Data type Range
valueRatio			Ratio	There are no (further) constraints on this element Data type Ratio
valueSampledData			SampledData	There are no (further) constraints on this element Data type SampledData
valueSignature			Signature	There are no (further) constraints on this element Data type Signature
valueTiming			Timing	There are no (further) constraints on this element Data type Timing
valueContactDetail			ContactDetail	There are no (further) constraints on this element Data type ContactDetail
valueContributor			Contributor	There are no (further) constraints on this element Data type Contributor
valueDataRequirement			DataRequirement	There are no (further) constraints on this element Data type DataRequirement
valueExpression			Expression	There are no (further) constraints on this element Data type Expression
valueParameterDefinition			ParameterDefinition	There are no (further) constraints on this element Data type ParameterDefinition
valueRelatedArtifact			RelatedArtifact	There are no (further) constraints on this element Data type RelatedArtifact
valueTriggerDefinition			TriggerDefinition	There are no (further) constraints on this element Data type TriggerDefinition
valueUsageContext			UsageContext	There are no (further) constraints on this element Data type UsageContext
valueDosage			Dosage	There are no (further) constraints on this element Data type Dosage
valueMeta			Meta	There are no (further) constraints on this element Data type Meta
valueReference			Reference()	There are no (further) constraints on this element Data type Reference()
resource	Σ I	0..1	Resource	There are no (further) constraints on this element Element id Parameters.parameter.resource Short description If parameter is a whole resource Definition Se o parâmetro corresponder ao recurso inteiro. Comments When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods. Data type Resource Mappings rim: Entity. Role, or Act
part	Σ	0..*	see (parameter)	There are no (further) constraints on this element Element id Parameters.parameter.part Short description Named part of a multi-part parameter Definition Identifica uma parte de um parâmetro com várias partes. Comments Only one level of nested parameters is allowed.
patient	Σ I	1..1	BackboneElement	Element id Parameters.parameter:patient Short description Operation Parameter Definition Identifica o parâmetro transmitido durante a operação. Data type BackboneElement Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` inv-1: A parameter must have one and only one of (value, resource, part) `(part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists()))` Mappings rim: n/a
id		0..1	id	There are no (further) constraints on this element Element id Parameters.parameter:patient.id Short description Unique id for inter-element referencing Definition ID único para o elemento num recurso (para referências internas). Pode ser qualquer valor de cadeia que não contenha espaços. Data type id Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Parameters.parameter:patient.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id Parameters.parameter:patient.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
name	Σ	1..1	stringFixed Value	Element id Parameters.parameter:patient.name Short description Name from the definition Definition Nome do parâmetro (em texto) Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Fixed value IdentificadorUtente Mappings rim: n/a
value[x]	Σ I	0..1		Element id Parameters.parameter:patient.value[x] Short description An identifier intended for computation Definition Key única alfanumérica de 19 caracteres para efeitos de identificação em contexto de facturação. Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CX / EI (occasionally, more often EI maps to a resource id or a URL) rim: II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd: Identifier
valueIdentifier			Extension Identifier PT Core	Data type Extension Identifier PT Core
resource	Σ I	0..0	Resource	There are no (further) constraints on this element Element id Parameters.parameter:patient.resource Short description If parameter is a whole resource Definition Se o parâmetro corresponder ao recurso inteiro. Comments When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods. Data type Resource Mappings rim: Entity. Role, or Act
part	Σ	0..0	see (parameter)	There are no (further) constraints on this element Element id Parameters.parameter:patient.part Short description Named part of a multi-part parameter Definition Identifica uma parte de um parâmetro com várias partes. Comments Only one level of nested parameters is allowed.
vaccineCode	Σ I	1..1	BackboneElement	There are no (further) constraints on this element Element id Parameters.parameter:vaccineCode Short description Operation Parameter Definition Identifica o parâmetro transmitido ou recebido durante a operação. Data type BackboneElement Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` inv-1: A parameter must have one and only one of (value, resource, part) `(part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists()))` Mappings rim: n/a
id		0..1	id	There are no (further) constraints on this element Element id Parameters.parameter:vaccineCode.id Short description Unique id for inter-element referencing Definition ID único para o elemento num recurso (para referências internas). Pode ser qualquer valor de cadeia que não contenha espaços. Data type id Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Parameters.parameter:vaccineCode.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id Parameters.parameter:vaccineCode.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
name	Σ	1..1	stringFixed Value	Element id Parameters.parameter:vaccineCode.name Short description Name from the definition Definition Nome do parâmetro (em texto) Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Fixed value CodigoVacina Mappings rim: n/a
value[x]	Σ I	0..0		Element id Parameters.parameter:vaccineCode.value[x] Short description Concept - reference to a terminology or just text Definition A concept that may be defined by a formal reference to a terminology or ontology or may be provided by text. Comments Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination. Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD
resource	Σ I	0..0	Resource	There are no (further) constraints on this element Element id Parameters.parameter:vaccineCode.resource Short description If parameter is a whole resource Definition Se o parâmetro corresponder ao recurso inteiro. Comments When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods. Data type Resource Mappings rim: Entity. Role, or Act
part	Σ	1..1	see (parameter)	Element id Parameters.parameter:vaccineCode.part Short description Named part of a multi-part parameter Definition Identifica uma parte de um parâmetro com várias partes. Comments Only one level of nested parameters is allowed. Sliced: Unordered, Open, by name(Value)
vaccine	Σ	0..1	see (parameter)	There are no (further) constraints on this element Element id Parameters.parameter:vaccineCode.part:vaccine Short description Named part of a multi-part parameter Definition Identifica uma parte de um parâmetro com várias partes. Comments Only one level of nested parameters is allowed.
id		0..1	id	There are no (further) constraints on this element Element id Parameters.parameter:vaccineCode.part:vaccine.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type id Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Parameters.parameter:vaccineCode.part:vaccine.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id Parameters.parameter:vaccineCode.part:vaccine.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
name	Σ	1..1	stringFixed Value	Element id Parameters.parameter:vaccineCode.part:vaccine.name Short description Name from the definition Definition The name of the parameter (reference to the operation definition). Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Fixed value Vacina Mappings rim: n/a
value[x]	Σ I	0..1	Binding	Element id Parameters.parameter:vaccineCode.part:vaccine.value[x] Short description Concept - reference to a terminology or just text Definition A concept that may be defined by a formal reference to a terminology or ontology or may be provided by text. Comments Value Set Name: Vaccine Binding https://www.ctc.min-saude.pt/catalogos/vacinas (required) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD
valueCodeableConcept			CodeableConcept PT Core	Data type CodeableConcept PT Core
resource	Σ I	0..0	Resource	There are no (further) constraints on this element Element id Parameters.parameter:vaccineCode.part:vaccine.resource Short description If parameter is a whole resource Definition If the parameter is a whole resource. Comments When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods. Data type Resource Mappings rim: Entity. Role, or Act
part	Σ	0..0	see (parameter)	There are no (further) constraints on this element Element id Parameters.parameter:vaccineCode.part:vaccine.part Short description Named part of a multi-part parameter Definition A named part of a multi-part parameter. Comments Only one level of nested parameters is allowed.
immunoglobulin	Σ	0..1	see (parameter)	There are no (further) constraints on this element Element id Parameters.parameter:vaccineCode.part:immunoglobulin Short description Named part of a multi-part parameter Definition Identifica uma parte de um parâmetro com várias partes. Comments Only one level of nested parameters is allowed.
id		0..1	id	There are no (further) constraints on this element Element id Parameters.parameter:vaccineCode.part:immunoglobulin.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type id Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Parameters.parameter:vaccineCode.part:immunoglobulin.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id Parameters.parameter:vaccineCode.part:immunoglobulin.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
name	Σ	1..1	stringFixed Value	Element id Parameters.parameter:vaccineCode.part:immunoglobulin.name Short description Name from the definition Definition The name of the parameter (reference to the operation definition). Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Fixed value Imunoglobulina Mappings rim: n/a
value[x]	Σ I	0..1	Binding	Element id Parameters.parameter:vaccineCode.part:immunoglobulin.value[x] Short description Concept - reference to a terminology or just text Definition A concept that may be defined by a formal reference to a terminology or ontology or may be provided by text. Comments Value Set Name: Immunoglobulin Binding https://www.ctc.min-saude.pt/catalogos/vacinas (required) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD
valueCodeableConcept			CodeableConcept PT Core	Data type CodeableConcept PT Core
resource	Σ I	0..0	Resource	There are no (further) constraints on this element Element id Parameters.parameter:vaccineCode.part:immunoglobulin.resource Short description If parameter is a whole resource Definition If the parameter is a whole resource. Comments When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods. Data type Resource Mappings rim: Entity. Role, or Act
part	Σ	0..0	see (parameter)	There are no (further) constraints on this element Element id Parameters.parameter:vaccineCode.part:immunoglobulin.part Short description Named part of a multi-part parameter Definition A named part of a multi-part parameter. Comments Only one level of nested parameters is allowed.

O recurso Practitioner é referenciado pelo recurso MessageHeader(MessageHeader.enterer) e identifica o profissional responsável pelo pedido. Para mais informações sobre a implementação deste recurso, no contexto do presente caso de uso, consultar: PractitionerPTPSSNC profile

Practitioner	I		Practitioner	There are no (further) constraints on this element Element id Practitioner Short description A person with a formal responsibility in the provisioning of healthcare or related services Definition Morada do profissional Data type Practitioner Constraints dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources `contained.contained.empty()` dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated `contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()` dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource `contained.where(((id.exists() and ('#'+id in (%resource.descendants().reference \| %resource.descendants().as(canonical) \| %resource.descendants().as(uri) \| %resource.descendants().as(url)))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(uri) = '#').exists()).not()).trace('unmatched', id).empty()` dom-6: A resource should have narrative for robust management text.`div`.exists() dom-5: If a resource is contained in another resource, it SHALL NOT have a security label `contained.meta.security.empty()` Mappings rim: Entity. Role, or Act v2: PRD (as one example) rim: Role servd: Provider w5: administrative.individual
id	Σ	1..1	id	There are no (further) constraints on this element Element id Practitioner.id Short description Logical id of this artifact Definition The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes. Comments The only time that a resource does not have an id is when it is being submitted to the server using a create operation. Data type id
meta	Σ	0..1	Meta PT Core	There are no (further) constraints on this element Element id Practitioner.meta Short description Metadata about the resource Definition The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource. Data type Meta PT Core Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a rim: N/A
implicitRules	Σ ?!	0..1	uri	There are no (further) constraints on this element Element id Practitioner.implicitRules Short description A set of rules under which this content was created Definition A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc. Comments Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc. Data type uri Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a
language		0..1	codeBinding	There are no (further) constraints on this element Element id Practitioner.language Short description Language of the resource content Definition The base language in which the resource is written. Comments Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute). Data type code Binding IETF language tag Common Languages (preferred) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a
text		0..1	Narrative	There are no (further) constraints on this element Element id Practitioner.text Short description Text summary of the resource, for human interpretation Alternate names narrative, html, xhtml, display Definition A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety. Comments Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later. Data type Narrative Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a rim: N/A rim: Act.text?
contained	I	0..*	Resource	There are no (further) constraints on this element Element id Practitioner.contained Short description Contained, inline Resources Alternate names inline resources, anonymous resources, contained resources Definition These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope. Comments This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels. Data type Resource Constraints dom-r4b: Containing new R4B resources within R4 resources may cause interoperability issues if instances are shared with R4 systems ($this is Citation or $this is Evidence or $this is EvidenceReport or $this is EvidenceVariable or $this is MedicinalProductDefinition or $this is PackagedProductDefinition or $this is AdministrableProductDefinition or $this is Ingredient or $this is ClinicalUseDefinition or $this is RegulatedAuthorization or $this is SubstanceDefinition or $this is SubscriptionStatus or $this is SubscriptionTopic) implies (%resource is Citation or %resource is Evidence or %resource is EvidenceReport or %resource is EvidenceVariable or %resource is MedicinalProductDefinition or %resource is PackagedProductDefinition or %resource is AdministrableProductDefinition or %resource is Ingredient or %resource is ClinicalUseDefinition or %resource is RegulatedAuthorization or %resource is SubstanceDefinition or %resource is SubscriptionStatus or %resource is SubscriptionTopic) Mappings rim: Entity. Role, or Act rim: N/A
extension	I	0..0	Extension	There are no (further) constraints on this element Element id Practitioner.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	?! I	0..*	Extension	There are no (further) constraints on this element Element id Practitioner.modifierExtension Short description Extensions that cannot be ignored Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
identifier	Σ	1..*	Extension Identifier PT Core	There are no (further) constraints on this element Element id Practitioner.identifier Short description An identifier intended for computation Definition Identificadores do profissional Requirements Often, specific identities are assigned for the agent. Data type Extension Identifier PT Core Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CX / EI (occasionally, more often EI maps to a resource id or a URL) rim: II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd: Identifier w5: FiveWs.identifier v2: PRD-7 (or XCN.1) rim: ./id servd: ./Identifiers
id		0..1	id	There are no (further) constraints on this element Element id Practitioner.identifier.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type id Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Practitioner.identifier.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
use	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element id Practitioner.identifier.use Short description usual \| official \| temp \| secondary \| old (If known) Definition Propósito do identificador: official: O identificador considerado mais fiável para a identificação do item. temp: Um identificador temporário. secondary: Um identificador que foi atribuído para identificar o item em um contexto relativo, mas não pode usado em um contexto diferente. old: O identificador já não é considerado válido, mas pode ser relevante para fins de pesquisa. Requirements Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. Comments Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. Data type code Binding IdentifierUse (required) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: N/A rim: Role.code or implied by context
type	Σ	0..1	CodeableConcept PT CoreBinding	There are no (further) constraints on this element Element id Practitioner.identifier.type Short description Concept - reference to a terminology or just text Definition A concept that may be defined by a formal reference to a terminology or ontology or may be provided by text. Requirements Allows users to make use of identifiers when the identifier system is not known. Comments Value Set: {{pagelink:ExtensionIdentifierType}} Data type CodeableConcept PT Core Binding Extension Identifier Type (extensible) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD v2: CX.5 rim: Role.code or implied by context
id		0..1	id	There are no (further) constraints on this element Element id Practitioner.identifier.type.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type id Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Practitioner.identifier.type.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
coding	Σ	0..*	Coding PT Core	There are no (further) constraints on this element Element id Practitioner.identifier.type.coding Short description A reference to a code defined by a terminology system Definition A reference to a code defined by a terminology system. Requirements Allows for alternative encodings within a code system, and translations to other code systems. Comments Codes may be defined very casually in enumerations or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Data type Coding PT Core Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim: CV orim: fhir:Coding rdfs:subClassOf dt:CDCoding v2: CE.1-8, CE.10-22 rim: union(., ./translation) orim: fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
id		0..1	id	There are no (further) constraints on this element Element id Practitioner.identifier.type.coding.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type id Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Practitioner.identifier.type.coding.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
system	Σ	1..1	uri	There are no (further) constraints on this element Element id Practitioner.identifier.type.coding.system Short description Identity of the terminology system Definition The identification of the code system that defines the meaning of the symbol in the code. Requirements Need to be unambiguous about the source of the definition of the symbol. Comments The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously. Data type uri Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE.3 rim:* ./codeSystem orim: fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem
version	Σ	0..0	string	There are no (further) constraints on this element Element id Practitioner.identifier.type.coding.version Short description Version of the system - if relevant Definition The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged. Comments Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date. Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE.7 rim:* ./codeSystemVersion orim: fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion
code	Σ	1..1	code	There are no (further) constraints on this element Element id Practitioner.identifier.type.coding.code Short description Symbol in syntax defined by the system Definition A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination). Requirements Need to refer to a particular code in the system. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type code Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE.1 rim:* ./code orim: fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code
display	Σ	1..1	string	There are no (further) constraints on this element Element id Practitioner.identifier.type.coding.display Short description Representation defined by the system Definition A representation of the meaning of the code in the system, following the rules of the system. Requirements Need to be able to carry a human-readable meaning of the code for readers that do not know the system. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE.2 - but note this is not well followed rim:* CV.displayName orim: fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName
userSelected	Σ	0..0	boolean	There are no (further) constraints on this element Element id Practitioner.identifier.type.coding.userSelected Short description If this coding was chosen directly by the user Definition Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays). Requirements This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing. Comments Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely. Data type boolean Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: Sometimes implied by being first rim: CD.codingRationale orim: fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]
text	Σ	1..1	string	There are no (further) constraints on this element Element id Practitioner.identifier.type.text Short description Plain text representation of the concept Definition A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user. Requirements The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source. Comments Very often the text is the same as a displayName of one of the codings. Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE.9. But note many systems use CE.2 for this rim: ./originalText[mediaType/code="text/plain"]/data orim: fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText
system	Σ	0..1	uri	There are no (further) constraints on this element Element id Practitioner.identifier.system Short description The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique. Requirements There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. Comments Para sistemas geridos pela SPMS o system tem de seguir a seguinte estrutura: http://spms.min-saude.pt/<sistema>/identifiers/<identifier-id> Data type uri Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Examples General http://www.acme.com/identifiers/patient Mappings rim: n/a v2: CX.4 / EI-2-4 rim: II.root or Role.id.root servd: ./IdentifierType
value	Σ	1..1	string	There are no (further) constraints on this element Element id Practitioner.identifier.value Short description The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system. Comments If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Examples General 123456 Mappings rim: n/a v2: CX.1 / EI.1 rim: II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd: ./Value
period	Σ I	0..1	Period PT Core	There are no (further) constraints on this element Element id Practitioner.identifier.period Short description Time range defined by start and end date/time Alternate names Period Definition A time period defined by a start and end date and optionally time. Comments A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration. Data type Period PT Core Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` per-1: If present, start SHALL have a lower value than end `start.hasValue().not() or end.hasValue().not() or (start <= end)` Mappings rim: n/a v2: DR rim: IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"] v2: CX.7 + CX.8 rim: Role.effectiveTime or implied by context servd: ./StartDate and ./EndDate
assigner	Σ I	0..0	Reference(Organization PT Core)	There are no (further) constraints on this element Element id Practitioner.identifier.assigner Short description Organization that issued id (may be just text) Definition Organization that issued/manages the identifier. Comments The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. Data type Reference(Organization PT Core) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')) or (reference='#' and %rootResource!=%resource)` Mappings rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2: CX.4 / (CX.4,CX.9,CX.10) rim: II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd: ./IdentifierIssuingAuthority
active	Σ	0..0	boolean	There are no (further) constraints on this element Element id Practitioner.active Short description Whether this practitioner's record is in active use Definition Indica se o profissional se encontra ativo ou inativo Requirements Need to be able to mark a practitioner record as not to be used because it was created in error. Comments If the practitioner is not in use by one organization, then it should mark the period on the PractitonerRole with an end date (even if they are active) as they may be active in another role. Meaning when missing This resource is generally assumed to be active if no value is provided for the active element Data type boolean Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a w5: FiveWs.status rim: ./statusCode
name	Σ	0..*	HumanName PT Core	There are no (further) constraints on this element Element id Practitioner.name Short description Name of a human - parts and usage Definition Nome do profissional Requirements The name(s) that a Practitioner is known by. Where there are multiple, the name that the practitioner is usually known as should be used in the display. Comments Names may be changed, or repudiated, or people may have different names in different contexts. Names may be divided into parts of different type that have variable significance depending on context, though the division into parts does not always matter. With personal names, the different parts might or might not be imbued with some implicit meaning; various cultures associate different importance with the name parts and the degree to which systems must care about name parts around the world varies widely. Data type HumanName PT Core Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: XPN rim: EN (actually, PN) servd: ProviderName v2: XCN Components rim: ./name servd: ./PreferredName (GivenNames, FamilyName, TitleCode)
id		0..1	id	There are no (further) constraints on this element Element id Practitioner.name.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type id Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Practitioner.name.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
use	Σ ?!	0..0	codeBinding	There are no (further) constraints on this element Element id Practitioner.name.use Short description usual \| official \| temp \| nickname \| anonymous \| old \| maiden Definition Indica a finalidade do nome: “official”: Nome oficial. “usual”: Nome profissional. “old”: Nome antigo (após “merge” de utentes/profissionais). “anonymous”: Este HumanNameUse será utilizado quando se pretende proteger a identidade da pessoa pode ser atribuído o nome anónimo, sigla ou pseudónimo. “temp “: O Nome temporário será utilizado para esclarecer o período associado à utilização deste HumanNameUse. Este poderá ser utilizado para nomes temporários atribuídos no nascimento ou em situações de emergência. “maiden”: Nome utilizado antes da mudança de nome por causa do casamento. “nickname”: Nome informal atribuído à pessoa. Requirements Allows the appropriate name for a particular context of use to be selected from among a set of names. Comments Applications can assume that a name is current unless it explicitly says that it is temporary or old. Data type code Binding NameUse (required) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: XPN.7, but often indicated by which field contains the name rim: unique(./use) servd: ./NamePurpose
text	Σ	0..1	string	There are no (further) constraints on this element Element id Practitioner.name.text Short description Text representation of the full name Definition Nome completo Requirements A renderable, unencoded form. Comments Can provide both a text representation and parts. Applications updating a name SHALL ensure that when both text and parts are present, no content is included in the text that isn't found in a part. Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: implied by XPN.11 rim: ./formatted
family	Σ	0..0	string	There are no (further) constraints on this element Element id Practitioner.name.family Short description Family name (often called 'Surname') Alternate names surname Definition Apelidos Comments Family Name may be decomposed into specific parts using extensions (de, nl, es related cultures). Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: XPN.1/FN.1 rim: ./part[partType = FAM] servd: ./FamilyName
given	Σ	0..0	string	There are no (further) constraints on this element Element id Practitioner.name.given Short description Given names (not always 'first'). Includes middle names Alternate names first name, middle name Definition Nomes próprios Comments If only initials are recorded, they may be used in place of the full name parts. Initials may be separated into multiple given names but often aren't due to paractical limitations. This element is not called "first name" since given names do not always come first. Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: XPN.2 + XPN.3 rim: ./part[partType = GIV] servd: ./GivenNames
prefix	Σ	0..0	string	There are no (further) constraints on this element Element id Practitioner.name.prefix Short description Parts that come before the name Definition Prefixo Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: XPN.5 rim: ./part[partType = PFX] servd: ./TitleCode
suffix	Σ	0..0	string	There are no (further) constraints on this element Element id Practitioner.name.suffix Short description Parts that come after the name Definition Sufixo Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: XPN/4 rim: ./part[partType = SFX]
period	Σ I	0..0	Period PT Core	There are no (further) constraints on this element Element id Practitioner.name.period Short description Time range defined by start and end date/time Alternate names Period Definition Período de tempo em que o nome estava/está em uso. Requirements Allows names to be placed in historical context. Comments A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration. Data type Period PT Core Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` per-1: If present, start SHALL have a lower value than end `start.hasValue().not() or end.hasValue().not() or (start <= end)` Mappings rim: n/a v2: DR rim: IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"] v2: XPN.13 + XPN.14 rim: ./usablePeriod[type="IVL<TS>"] servd: ./StartDate and ./EndDate
telecom	Σ I	0..0	ContactPoint PT Core	There are no (further) constraints on this element Element id Practitioner.telecom Short description Details of a Technology mediated contact point (phone, fax, email, etc.) Definition Contactos do profissional Requirements Need to know how to reach a practitioner independent to any roles the practitioner may have. Comments Person may have multiple ways to be contacted with different uses or applicable periods. May need to have options for contacting the person urgently and to help with identification. These typically will have home numbers, or mobile numbers that are not role specific. Data type ContactPoint PT Core Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` cpt-2: A system is required if a value is provided. `value.empty() or system.exists()` Mappings rim: n/a v2: XTN rim: TEL servd: ContactPoint v2: PRT-15, STF-10, ROL-12 rim: ./telecom servd: ./ContactPoints
address	Σ	0..0	Address PT Core	There are no (further) constraints on this element Element id Practitioner.address Short description An address expressed using postal conventions (as opposed to GPS or other location definition formats) Definition Morada do profissional. Para moradas nacionais é obrigatória a utilização da estrutura de moradas previstas pelos CTT. O atributo address.text será utilizado para descrição de morada de países terceiros e o atributo address.line terá de conter a estrutura da morada nacional definida pelos CTT, tendo de cumprir com a ordenação definida no line. Requirements The home/mailing address of the practitioner is often required for employee administration purposes, and also for some rostering services where the start point (practitioners home) can be used in calculations. Comments Note: address is intended to describe postal addresses for administrative purposes, not to describe absolute geographical coordinates. Postal addresses are often used as proxies for physical locations (also see the Location resource). Data type Address PT Core Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: XAD rim: AD servd: Address v2: ORC-24, STF-11, ROL-11, PRT-14 rim: ./addr servd: ./Addresses
gender	Σ	0..0	codeBinding	There are no (further) constraints on this element Element id Practitioner.gender Short description male \| female \| other \| unknown Definition Sexo administrativo. Requirements Needed to address the person correctly. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type code Binding The gender of a person used for administrative purposes. AdministrativeGender (required) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: STF-5 rim: ./administrativeGender servd: ./GenderCode
birthDate	Σ	0..0	date	There are no (further) constraints on this element Element id Practitioner.birthDate Short description The date on which the practitioner was born Definition Data de nascimento do profissional. Requirements Needed for identification. Data type date Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: STF-6 rim: ./birthTime servd: (not represented in ServD)
photo	I	0..0	Attachment PT Core	There are no (further) constraints on this element Element id Practitioner.photo Short description Content in a format defined elsewhere Definition Foto do profissional. Requirements Many EHR systems have the capability to capture an image of patients and personnel. Fits with newer social media usage too. Comments When providing a summary view (for example with Observation.value[x]) Attachment should be represented with a brief display text such as "Signed Procedure Consent". Data type Attachment PT Core Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` att-1: If the Attachment has data, it SHALL have a contentType `data.empty() or contentType.exists()` Mappings rim: n/a v2: ED/RP rim: ED rim: ./subjectOf/ObservationEvent[code="photo"]/value servd: ./ImageURI (only supports the URI reference)
qualification		0..0	BackboneElement	There are no (further) constraints on this element Element id Practitioner.qualification Short description Certification, licenses, or training pertaining to the provision of care Definition The official certifications, training, and licenses that authorize or otherwise pertain to the provision of care by the practitioner. For example, a medical license issued by a medical board authorizing the practitioner to practice medicine within a certian locality. Data type BackboneElement Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CER? rim: .playingEntity.playingRole[classCode=QUAL].code servd: ./Qualifications
communication		0..0	CodeableConcept PT CoreBinding	There are no (further) constraints on this element Element id Practitioner.communication Short description Concept - reference to a terminology or just text Definition Identifica o idioma do profissional. Requirements Knowing which language a practitioner speaks can help in facilitating communication with patients. Comments Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination. Data type CodeableConcept PT Core Binding IETF language tag All Languages (preferred) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD v2: PID-15, NK1-20, LAN-2 rim: ./languageCommunication servd: ./Languages.LanguageSpokenCode

O recurso Organization é referenciado pelo recurso MessageHeader(MessageHeader.sender e MessageHeader.destination[].receiver*) para identificar a entidade que envia e recebe a mensagem. Para mais informações sobre a implementação deste recurso, no contexto do presente caso de uso, consultar: OrganizationPTTRV profile

Organization	I		Organization	There are no (further) constraints on this element Element id Organization Short description A grouping of people or organizations with a common purpose Definition A formally or informally recognized grouping of people or organizations formed for the purpose of achieving some form of collective action. Includes companies, institutions, corporations, departments, community groups, healthcare practice groups, payer/insurer, etc. Data type Organization Constraints dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources `contained.contained.empty()` dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated `contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()` dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource `contained.where(((id.exists() and ('#'+id in (%resource.descendants().reference \| %resource.descendants().as(canonical) \| %resource.descendants().as(uri) \| %resource.descendants().as(url)))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(uri) = '#').exists()).not()).trace('unmatched', id).empty()` dom-6: A resource should have narrative for robust management text.`div`.exists() dom-5: If a resource is contained in another resource, it SHALL NOT have a security label `contained.meta.security.empty()` org-1: The organization SHALL at least have a name or an identifier, and possibly more than one `(identifier.count() + name.count()) > 0` Mappings rim: Entity. Role, or Act v2: (also see master files messages) rim: Organization(classCode=ORG, determinerCode=INST) servd: Organization w5: administrative.group
id	Σ	1..1	id	There are no (further) constraints on this element Element id Organization.id Short description Logical id of this artifact Definition The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes. Comments The only time that a resource does not have an id is when it is being submitted to the server using a create operation. Data type id
meta	Σ	0..1	Meta PT Core	There are no (further) constraints on this element Element id Organization.meta Short description Metadata about the resource Definition The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource. Data type Meta PT Core Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a rim: N/A
implicitRules	Σ ?!	0..1	uri	There are no (further) constraints on this element Element id Organization.implicitRules Short description A set of rules under which this content was created Definition A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc. Comments Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc. Data type uri Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a
language		0..1	codeBinding	There are no (further) constraints on this element Element id Organization.language Short description Language of the resource content Definition The base language in which the resource is written. Comments Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute). Data type code Binding IETF language tag Common Languages (preferred) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a
text		0..1	Narrative	There are no (further) constraints on this element Element id Organization.text Short description Text summary of the resource, for human interpretation Alternate names narrative, html, xhtml, display Definition A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety. Comments Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later. Data type Narrative Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a rim: N/A rim: Act.text?
contained	I	0..*	Resource	There are no (further) constraints on this element Element id Organization.contained Short description Contained, inline Resources Alternate names inline resources, anonymous resources, contained resources Definition These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope. Comments This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels. Data type Resource Constraints dom-r4b: Containing new R4B resources within R4 resources may cause interoperability issues if instances are shared with R4 systems ($this is Citation or $this is Evidence or $this is EvidenceReport or $this is EvidenceVariable or $this is MedicinalProductDefinition or $this is PackagedProductDefinition or $this is AdministrableProductDefinition or $this is Ingredient or $this is ClinicalUseDefinition or $this is RegulatedAuthorization or $this is SubstanceDefinition or $this is SubscriptionStatus or $this is SubscriptionTopic) implies (%resource is Citation or %resource is Evidence or %resource is EvidenceReport or %resource is EvidenceVariable or %resource is MedicinalProductDefinition or %resource is PackagedProductDefinition or %resource is AdministrableProductDefinition or %resource is Ingredient or %resource is ClinicalUseDefinition or %resource is RegulatedAuthorization or %resource is SubstanceDefinition or %resource is SubscriptionStatus or %resource is SubscriptionTopic) Mappings rim: Entity. Role, or Act rim: N/A
extension	I	0..0	Extension	There are no (further) constraints on this element Element id Organization.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	?! I	0..*	Extension	There are no (further) constraints on this element Element id Organization.modifierExtension Short description Extensions that cannot be ignored Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
identifier	Σ I	0..*	Extension Identifier PT Core	There are no (further) constraints on this element Element id Organization.identifier Short description An identifier intended for computation Definition Identificadores da Entidade Requirements Organizations are known by a variety of ids. Some institutions maintain several, and most collect identifiers for exchange with other organizations concerning the organization. Data type Extension Identifier PT Core Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CX / EI (occasionally, more often EI maps to a resource id or a URL) rim: II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd: Identifier w5: FiveWs.identifier v2: XON.10 / XON.3 rim: .scopes[Role](classCode=IDENT) servd: ./Identifiers
active	Σ ?!	0..0	boolean	There are no (further) constraints on this element Element id Organization.active Short description Whether the organization's record is still in active use Definition Indica se a entidade se encontra ativa ou inativa Requirements Need a flag to indicate a record is no longer to be used and should generally be hidden for the user in the UI. Comments This active flag is not intended to be used to mark an organization as temporarily closed or under construction. Instead the Location(s) within the Organization should have the suspended status. If further details of the reason for the suspension are required, then an extension on this element should be used. This element is labeled as a modifier because it may be used to mark that the resource was created in error. Meaning when missing This resource is generally assumed to be active if no value is provided for the active element Data type boolean Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a w5: FiveWs.status v2: No equivalent in HL7 v2 rim: .status servd: ./Status (however this concept in ServD more covers why the organization is active or not, could be delisted, deregistered, not operational yet) this could alternatively be derived from ./StartDate and ./EndDate and given a context date.
type	Σ	0..0	CodeableConcept PT Core	There are no (further) constraints on this element Element id Organization.type Short description Concept - reference to a terminology or just text Definition Tipo de entidade Requirements Need to be able to track the kind of organization that this is - different organization types have different uses. Comments Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination. Data type CodeableConcept PT Core Sliced: Unordered, Open, by id(Value) Binding Used to categorize the organization. OrganizationType (example) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD w5: FiveWs.class v2: No equivalent in v2 rim: .code servd: n/a
name	Σ I	0..1	string	There are no (further) constraints on this element Element id Organization.name Short description Name used for the organization Definition Nome da entidade. Requirements Need to use the name as the label of the organization. Comments If the name of an organization changes, consider putting the old name in the alias column so that it can still be located through searches. Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: XON.1 rim: .name servd: .PreferredName/Name
alias		0..0	string	There are no (further) constraints on this element Element id Organization.alias Short description A list of alternate names that the organization is known as, or was known as in the past Definition Designações alternativas pelas quais a entidade é ou era conhecida, como sigla ou nome abreviado. Requirements Over time locations and organizations go through many changes and can be known by different names. For searching knowing previous names that the organization was known by can be very useful. Comments There are no dates associated with the alias/historic names, as this is not intended to track when names were used, but to assist in searching so that older names can still result in identifying the organization. Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a rim: .name
telecom	I	0..0	ContactPoint	There are no (further) constraints on this element Element id Organization.telecom Short description A contact detail for the organization Definition A contact detail for the organization. Requirements Human contact for the organization. Comments The use code 'home' is not to be used. Note that these contacts are not the contact details of people who are employed by or represent the organization, but official contacts for the organization itself. Data type ContactPoint Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` cpt-2: A system is required if a value is provided. `value.empty() or system.exists()` org-3: The telecom of an organization can never be of use 'home' `where(use = 'home').empty()` Mappings rim: n/a v2: XTN rim: TEL servd: ContactPoint v2: ORC-22? rim: .telecom servd: ./ContactPoints
address	I	0..0	Address	There are no (further) constraints on this element Element id Organization.address Short description An address for the organization Definition An address for the organization. Requirements May need to keep track of the organization's addresses for contacting, billing or reporting requirements. Comments Organization may have multiple addresses with different uses or applicable periods. The use code 'home' is not to be used. Data type Address Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` org-2: An address of an organization can never be of use 'home' `where(use = 'home').empty()` Mappings rim: n/a v2: XAD rim: AD servd: Address v2: ORC-23? rim: .address servd: ./PrimaryAddress and ./OtherAddresses
partOf	Σ I	0..0	Reference(Organization PT Core)	There are no (further) constraints on this element Element id Organization.partOf Short description The organization of which this organization forms a part Definition Identifica a hierarquia da entidade, referenciando a entidade pai que lhe está associada Requirements Need to be able to track the hierarchy of organizations within an organization. Comments References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository. Data type Reference(Organization PT Core) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')) or (reference='#' and %rootResource!=%resource)` Mappings rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2: No equivalent in HL7 v2 rim: .playedBy[classCode=Part].scoper servd: n/a
contact		0..0	BackboneElement	There are no (further) constraints on this element Element id Organization.contact Short description Contact for the organization for a certain purpose Definition Contactos utilizados para propósitos específicos, na entidade Requirements Need to keep track of assigned contact points within bigger organization. Comments Where multiple contacts for the same purpose are provided there is a standard extension that can be used to determine which one is the preferred contact to use. Data type BackboneElement Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a rim: .contactParty
endpoint	I	0..0	Reference(Endpoint)	There are no (further) constraints on this element Element id Organization.endpoint Short description Technical endpoints providing access to services operated for the organization Definition Technical endpoints providing access to services operated for the organization. Requirements Organizations have multiple systems that provide various services and need to be able to define the technical connection details for how to connect to them, and for what purpose. Comments References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository. Data type Reference(Endpoint) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')) or (reference='#' and %rootResource!=%resource)` Mappings rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity)

Mensagem de resposta à Pesquisa de Informação da Vacina

A mensagem de resposta à pesquisa de informação da vacina é empacotada num Bundle cuja a composição é apresentada no esquema seguinte:

O recurso Bundle é o primeiro recurso utilizado na mensagem de resposta à pesquisa de informação. Utilizado para agrupar um conjunto de recursos que compõem a mensagem. Para mais informações sobre a implementação deste recurso, no contexto do presente caso de uso, consultar: BundlePTTRV profile

Bundle	I		Bundle	There are no (further) constraints on this element Element id Bundle Short description Contains a collection of resources Definition A container for a collection of resources. Data type Bundle Constraints bdl-7: FullUrl must be unique in a bundle, or else entries with the same fullUrl must have different meta.versionId (except in history bundles) `(type = 'history') or entry.where(fullUrl.exists()).select(fullUrl&resource.meta.versionId).isDistinct()` bdl-9: A document must have an identifier with a system and a value `type = 'document' implies (identifier.system.exists() and identifier.value.exists())` bdl-3: entry.request mandatory for batch/transaction/history, otherwise prohibited `entry.all(request.exists() = (%resource.type = 'batch' or %resource.type = 'transaction' or %resource.type = 'history'))` bdl-4: entry.response mandatory for batch-response/transaction-response/history, otherwise prohibited `entry.all(response.exists() = (%resource.type = 'batch-response' or %resource.type = 'transaction-response' or %resource.type = 'history'))` bdl-12: A message must have a MessageHeader as the first resource `type = 'message' implies entry.first().resource.is(MessageHeader)` bdl-1: total only when a search or history `total.empty() or (type = 'searchset') or (type = 'history')` bdl-2: entry.search only when a search `entry.search.empty() or (type = 'searchset')` bdl-11: A document must have a Composition as the first resource `type = 'document' implies entry.first().resource.is(Composition)` bdl-10: A document must have a date `type = 'document' implies (timestamp.hasValue())` Mappings rim: Entity. Role, or Act v2: N/A rim: N/A cda: ClinicalDocument, if bundle.type = document w5: infrastructure.structure
id	Σ	1..1	id	There are no (further) constraints on this element Element id Bundle.id Short description Logical id of this artifact Definition The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes. Comments The only time that a resource does not have an id is when it is being submitted to the server using a create operation. Data type id
meta	Σ	0..1	Meta PT Core	Element id Bundle.meta Short description Metadata about the resource Definition Metadados do recurso. Data type Meta PT Core Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a rim: N/A
id		0..0	id	There are no (further) constraints on this element Element id Bundle.meta.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type id Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Bundle.meta.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
versionId	Σ	0..1	id	There are no (further) constraints on this element Element id Bundle.meta.versionId Short description Version specific identifier Definition The version specific identifier, as it appears in the version portion of the URL. This value changes when the resource is created, updated, or deleted. Comments The server assigns this value, and ignores what the client specifies, except in the case that the server is imposing version integrity on updates/deletes. Data type id Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a
lastUpdated	Σ	0..1	instant	There are no (further) constraints on this element Element id Bundle.meta.lastUpdated Short description When the resource version last changed Definition When the resource last changed - e.g. when the version changed. Comments This value is always populated except when the resource is first being created. The server / resource manager sets this value; what a client provides is irrelevant. This is equivalent to the HTTP Last-Modified and SHOULD have the same value on a read interaction. Data type instant Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a
source	Σ	0..0	uri	There are no (further) constraints on this element Element id Bundle.meta.source Short description Identifies where the resource comes from Definition A uri that identifies the source system of the resource. This provides a minimal amount of Provenance information that can be used to track or differentiate the source of information in the resource. The source may identify another FHIR server, document, message, database, etc. Comments In the provenance resource, this corresponds to Provenance.entity.what[x]. The exact use of the source (and the implied Provenance.entity.role) is left to implementer discretion. Only one nominated source is allowed; for additional provenance details, a full Provenance resource should be used. This element can be used to indicate where the current master source of a resource that has a canonical URL if the resource is no longer hosted at the canonical URL. Data type uri Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a
profile	Σ	0..1	canonical(StructureDefinition)	There are no (further) constraints on this element Element id Bundle.meta.profile Short description Profiles this resource claims to conform to Definition A list of profiles (references to StructureDefinition resources) that this resource claims to conform to. The URL is a reference to StructureDefinition.url. Comments It is up to the server and/or other infrastructure of policy to determine whether/how these claims are verified and/or updated over time. The list of profile URLs is a set. Data type canonical(StructureDefinition) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a
security	Σ	0..0	CodingBinding	There are no (further) constraints on this element Element id Bundle.meta.security Short description Security Labels applied to this resource Definition Security labels applied to this resource. These tags connect specific resources to the overall security policy and infrastructure. Comments The security labels can be updated without changing the stated version of the resource. The list of security labels is a set. Uniqueness is based the system/code, and version and display are ignored. Data type Coding Binding SecurityLabels (extensible) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim: CV orim: fhir:Coding rdfs:subClassOf dt:CDCoding
tag	Σ	0..0	Coding	There are no (further) constraints on this element Element id Bundle.meta.tag Short description Tags applied to this resource Definition Tags applied to this resource. Tags are intended to be used to identify and relate resources to process and workflow, and applications are not required to consider the tags when interpreting the meaning of a resource. Comments The tags can be updated without changing the stated version of the resource. The list of tags is a set. Uniqueness is based the system/code, and version and display are ignored. Data type Coding Binding Common Tags (example) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim: CV orim: fhir:Coding rdfs:subClassOf dt:CDCoding
implicitRules	Σ ?!	0..1	uri	There are no (further) constraints on this element Element id Bundle.implicitRules Short description A set of rules under which this content was created Definition A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc. Comments Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc. Data type uri Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a
language		0..1	codeBinding	There are no (further) constraints on this element Element id Bundle.language Short description Language of the resource content Definition The base language in which the resource is written. Comments Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute). Data type code Binding IETF language tag Common Languages (preferred) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a
identifier	Σ	0..1	Extension Identifier PT Core	There are no (further) constraints on this element Element id Bundle.identifier Short description Persistent identifier for the bundle Definition A persistent identifier for the bundle that won't change as a bundle is copied from server to server. Comments Persistent identity generally only matters for batches of type Document, Message, and Collection. It would not normally be populated for search and history results and servers ignore Bundle.identifier when processing batches and transactions. For Documents the .identifier SHALL be populated such that the .identifier is globally unique. Data type Extension Identifier PT Core Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CX / EI (occasionally, more often EI maps to a resource id or a URL) rim: II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd: Identifier w5: FiveWs.identifier cda: ClinicalDocument.id
id		0..1	id	There are no (further) constraints on this element Element id Bundle.identifier.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type id Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Bundle.identifier.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
use	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element id Bundle.identifier.use Short description usual \| official \| temp \| secondary \| old (If known) Definition Propósito do identificador: official: O identificador considerado mais fiável para a identificação do item. temp: Um identificador temporário. secondary: Um identificador que foi atribuído para identificar o item em um contexto relativo, mas não pode usado em um contexto diferente. old: O identificador já não é considerado válido, mas pode ser relevante para fins de pesquisa. Requirements Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. Comments Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. Data type code Binding IdentifierUse (required) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: N/A rim: Role.code or implied by context
type	Σ	0..1	CodeableConcept PT CoreBinding	There are no (further) constraints on this element Element id Bundle.identifier.type Short description Concept - reference to a terminology or just text Definition A concept that may be defined by a formal reference to a terminology or ontology or may be provided by text. Requirements Allows users to make use of identifiers when the identifier system is not known. Comments Value Set: ExtensionIdentifierType Data type CodeableConcept PT Core Binding Extension Identifier Type (extensible) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD v2: CX.5 rim: Role.code or implied by context
system	Σ	0..1	uri	There are no (further) constraints on this element Element id Bundle.identifier.system Short description The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique. Requirements There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. Comments Para sistemas geridos pela SPMS o system tem de seguir a seguinte estrutura: http://spms.min-saude.pt/<sistema>/identifiers/<identifier-id> Data type uri Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Examples General http://www.acme.com/identifiers/patient Mappings rim: n/a v2: CX.4 / EI-2-4 rim: II.root or Role.id.root servd: ./IdentifierType
value	Σ	1..1	string	There are no (further) constraints on this element Element id Bundle.identifier.value Short description The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system. Comments If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Examples General 123456 Mappings rim: n/a v2: CX.1 / EI.1 rim: II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd: ./Value
period	Σ I	0..1	Period PT Core	There are no (further) constraints on this element Element id Bundle.identifier.period Short description Time range defined by start and end date/time Alternate names Period Definition A time period defined by a start and end date and optionally time. Comments A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration. Data type Period PT Core Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` per-1: If present, start SHALL have a lower value than end `start.hasValue().not() or end.hasValue().not() or (start <= end)` Mappings rim: n/a v2: DR rim: IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"] v2: CX.7 + CX.8 rim: Role.effectiveTime or implied by context servd: ./StartDate and ./EndDate
assigner	Σ I	0..0	Reference(Organization PT Core)	There are no (further) constraints on this element Element id Bundle.identifier.assigner Short description Organization that issued id (may be just text) Definition Organization that issued/manages the identifier. Comments The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. Data type Reference(Organization PT Core) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')) or (reference='#' and %rootResource!=%resource)` Mappings rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2: CX.4 / (CX.4,CX.9,CX.10) rim: II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd: ./IdentifierIssuingAuthority
type	Σ	1..1	codeBinding	There are no (further) constraints on this element Element id Bundle.type Short description document \| message \| transaction \| transaction-response \| batch \| batch-response \| history \| searchset \| collection Definition Obrigatório a identificação de um dos seguintes códigos: “document” - O Bundle é do tipo documento. O primeiro recurso é o Composition. “message” - O Bundle é do tipo mensagem. O primeiro recurso é o MessageHeader. “transaction” - O Bundle do tipo transação. “transaction-response” - O Bundle é uma resposta a uma mensagem com tipo de Bundle transaction. “batch” - O Bundle é um conjunto de ações. “batch-response” - O Bundle é uma resposta a uma mensagem com tipo de Bundle batch. “history” - O Bundle é uma lista de recursos referente a uma interação de dados históricos. “searchset”- O Bundle é uma lista de resultados de uma pesquisa. “collection” - O Bundle é um conjunto de recursos agrupados num único pacote. Comments It's possible to use a bundle for other purposes (e.g. a document can be accepted as a transaction). This is primarily defined so that there can be specific rules for some of the bundle types. Data type code Binding Indicates the purpose of a bundle - how it is intended to be used. BundleType (required) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a w5: FiveWs.class
timestamp	Σ	0..1	instant	Element id Bundle.timestamp Short description When the bundle was assembled Definition No caso de Bundle.Type: "message", corresponde à data em que o conteúdo da mensagem foi criado. Comments For many bundles, the timestamp is equal to .meta.lastUpdated, because they are not stored (e.g. search results). When a bundle is placed in a persistent store, .meta.lastUpdated will be usually be changed by the server. When the bundle is a message, a middleware agent altering the message (even if not stored) SHOULD update .meta.lastUpdated. .timestamp is used to track the original time of the Bundle, and SHOULD be populated. Usage: document : the date the document was created. Note: the composition may predate the document, or be associated with multiple documents. The date of the composition - the authoring time - may be earlier than the document assembly time message : the date that the content of the message was assembled. This date is not changed by middleware engines unless they add additional data that changes the meaning of the time of the message history : the date that the history was assembled. This time would be used as the _since time to ask for subsequent updates searchset : the time that the search set was assembled. Note that different pages MAY have different timestamps but need not. Having different timestamps does not imply that subsequent pages will represent or include changes made since the initial query transaction \| transaction-response \| batch \| batch-response \| collection : no particular assigned meaning The timestamp value should be greater than the lastUpdated and other timestamps in the resources in the bundle, and it should be equal or earlier than the .meta.lastUpdated on the Bundle itself. Data type instant Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a w5: FiveWs.init cda: ClinicalDocument.effectiveTime
total	Σ I	0..0	unsignedInt	There are no (further) constraints on this element Element id Bundle.total Short description If search, the total number of matches Definition Usado apenas no caso do Bundle.Type com valor search ou history. Comments Only used if the bundle is a search result set. The total does not include resources such as OperationOutcome and included resources, only the total number of matching resources. Data type unsignedInt Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a
link	Σ	0..0	BackboneElement	There are no (further) constraints on this element Element id Bundle.link Short description Links related to this Bundle Definition Lista de links relacionados com o bundle Comments Both Bundle.link and Bundle.entry.link are defined to support providing additional context when Bundles are used (e.g. HATEOAS). Bundle.entry.link corresponds to links found in the HTTP header if the resource in the entry was read directly. This specification defines some specific uses of Bundle.link for searching and paging, but no specific uses for Bundle.entry.link, and no defined function in a transaction - the meaning is implementation specific. Data type BackboneElement Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a
entry	Σ I	0..*	BackboneElement	There are no (further) constraints on this element Element id Bundle.entry Short description Entry in the bundle - will have a resource or information Definition An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only). Data type BackboneElement Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` bdl-8: fullUrl cannot be a version specific reference `fullUrl.exists() implies fullUrl.contains('/_history/').not()` bdl-5: must be a resource unless there's a request or response `resource.exists() or request.exists() or response.exists()` Mappings rim: n/a
id		0..0	id	There are no (further) constraints on this element Element id Bundle.entry.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type id Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Bundle.entry.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id Bundle.entry.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
link	Σ	0..0	see (link)	There are no (further) constraints on this element Element id Bundle.entry.link Short description Links related to this entry Definition Lista de links relacionados com a entrada
fullUrl	Σ	0..1	uri	There are no (further) constraints on this element Element id Bundle.entry.fullUrl Short description URI for resource (Absolute URL server address or URI for UUID/OID) Definition The Absolute URL for the resource. The fullUrl SHALL NOT disagree with the id in the resource - i.e. if the fullUrl is not a urn:uuid, the URL shall be version-independent URL consistent with the Resource.id. The fullUrl is a version independent reference to the resource. The fullUrl element SHALL have a value except that: fullUrl can be empty on a POST (although it does not need to when specifying a temporary id for reference in the bundle) Results from operations might involve resources that are not identified. Comments fullUrl might not be unique in the context of a resource. Note that since FHIR resources do not need to be served through the FHIR API, the fullURL might be a URN or an absolute URL that does not end with the logical id of the resource (Resource.id). However, but if the fullUrl does look like a RESTful server URL (e.g. meets the regex, then the 'id' portion of the fullUrl SHALL end with the Resource.id. Note that the fullUrl is not the same as the canonical URL - it's an absolute url for an endpoint serving the resource (these will happen to have the same value on the canonical server for the resource with the canonical URL). Data type uri Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a
resource	Σ	0..1	Resource	There are no (further) constraints on this element Element id Bundle.entry.resource Short description A resource in the bundle Definition Recurso referenciado pelo Bundle, respeitando as regras da entry. Data type Resource Mappings rim: Entity. Role, or Act
search	Σ I	0..1	BackboneElement	There are no (further) constraints on this element Element id Bundle.entry.search Short description Search related information Definition Information about the search process that lead to the creation of this entry. Data type BackboneElement Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a
id		0..1	id	There are no (further) constraints on this element Element id Bundle.entry.search.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type id Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Bundle.entry.search.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id Bundle.entry.search.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
mode	Σ	0..1	codeBinding	There are no (further) constraints on this element Element id Bundle.entry.search.mode Short description match \| include \| outcome - why this is in the result set Definition Why this entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process. Comments There is only one mode. In some corner cases, a resource may be included because it is both a match and an include. In these circumstances, 'match' takes precedence. Data type code Binding Why an entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process. SearchEntryMode (required) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a
score	Σ	0..1	decimal	There are no (further) constraints on this element Element id Bundle.entry.search.score Short description Search ranking (between 0 and 1) Definition When searching, the server's search ranking score for the entry. Comments Servers are not required to return a ranking score. 1 is most relevant, and 0 is least relevant. Often, search results are sorted by score, but the client may specify a different sort order. See Patient Match for the EMPI search which relates to this element. Data type decimal Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a
request	Σ I	0..0	BackboneElement	There are no (further) constraints on this element Element id Bundle.entry.request Short description Additional execution information (transaction/batch/history) Definition Additional information about how this entry should be processed as part of a transaction or batch. For history, it shows how the entry was processed to create the version contained in the entry. Data type BackboneElement Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a
response	Σ I	0..0	BackboneElement	There are no (further) constraints on this element Element id Bundle.entry.response Short description Results of execution (transaction/batch/history) Definition Indicates the results of processing the corresponding 'request' entry in the batch or transaction being responded to or what the results of an operation where when returning history. Data type BackboneElement Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a
signature	Σ	0..0	Signature	There are no (further) constraints on this element Element id Bundle.signature Short description Digital Signature Definition Assinatura digital Requirements A Signature holds an electronic representation of a signature and its supporting context in a FHIR accessible form. The signature may either be a cryptographic type (XML DigSig or a JWS), which is able to provide non-repudiation proof, or it may be a graphical image that represents a signature or a signature process. This element allows capturing signatures on documents, messages, transactions or even search responses, to support content-authentication, non-repudiation or other business cases. This is primarily relevant where the bundle may travel through multiple hops or via other mechanisms where HTTPS non-repudiation is insufficient. Comments The signature could be created by the "author" of the bundle or by the originating device. Requirements around inclusion of a signature, verification of signatures and treatment of signed/non-signed bundles is implementation-environment specific. Data type Signature Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a rim: N/A

O recurso MessageHeader é a primeira entrada do recurso Bundle (Bundle.entry.fullUrl) e contém os detalhes do cabeçalho da mensagem. Para mais informações sobre a implementação deste recurso, no contexto do presente caso de uso, consultar: MessageHeaderPTTRV profile

MessageHeader	I		MessageHeader	There are no (further) constraints on this element Element id MessageHeader Short description A resource that describes a message that is exchanged between systems Definition The header for a message exchange that is either requesting or responding to an action. The reference(s) that are the subject of the action as well as other information related to the action are typically transmitted in a bundle in which the MessageHeader resource instance is the first resource in the bundle. Data type MessageHeader Constraints dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources `contained.contained.empty()` dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated `contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()` dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource `contained.where(((id.exists() and ('#'+id in (%resource.descendants().reference \| %resource.descendants().as(canonical) \| %resource.descendants().as(uri) \| %resource.descendants().as(url)))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(uri) = '#').exists()).not()).trace('unmatched', id).empty()` dom-6: A resource should have narrative for robust management text.`div`.exists() dom-5: If a resource is contained in another resource, it SHALL NOT have a security label `contained.meta.security.empty()` Mappings rim: Entity. Role, or Act v2: MSH / MSA / ERR rim: Message w5: infrastructure.exchange
id	Σ	1..1	id	There are no (further) constraints on this element Element id MessageHeader.id Short description Logical id of this artifact Definition The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes. Comments The only time that a resource does not have an id is when it is being submitted to the server using a create operation. Data type id
meta	Σ	0..1	Meta PT Core	There are no (further) constraints on this element Element id MessageHeader.meta Short description Metadata about the resource Definition The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource. Data type Meta PT Core Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a rim: N/A
implicitRules	Σ ?!	0..1	uri	There are no (further) constraints on this element Element id MessageHeader.implicitRules Short description A set of rules under which this content was created Definition A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc. Comments Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc. Data type uri Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a
language		0..1	codeBinding	There are no (further) constraints on this element Element id MessageHeader.language Short description Language of the resource content Definition The base language in which the resource is written. Comments Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute). Data type code Binding IETF language tag Common Languages (preferred) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a
text		0..1	Narrative	There are no (further) constraints on this element Element id MessageHeader.text Short description Text summary of the resource, for human interpretation Alternate names narrative, html, xhtml, display Definition A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety. Comments Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later. Data type Narrative Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a rim: N/A rim: Act.text?
contained	I	0..0	Resource	There are no (further) constraints on this element Element id MessageHeader.contained Short description Contained, inline Resources Alternate names inline resources, anonymous resources, contained resources Definition These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope. Comments This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels. Data type Resource Constraints dom-r4b: Containing new R4B resources within R4 resources may cause interoperability issues if instances are shared with R4 systems ($this is Citation or $this is Evidence or $this is EvidenceReport or $this is EvidenceVariable or $this is MedicinalProductDefinition or $this is PackagedProductDefinition or $this is AdministrableProductDefinition or $this is Ingredient or $this is ClinicalUseDefinition or $this is RegulatedAuthorization or $this is SubstanceDefinition or $this is SubscriptionStatus or $this is SubscriptionTopic) implies (%resource is Citation or %resource is Evidence or %resource is EvidenceReport or %resource is EvidenceVariable or %resource is MedicinalProductDefinition or %resource is PackagedProductDefinition or %resource is AdministrableProductDefinition or %resource is Ingredient or %resource is ClinicalUseDefinition or %resource is RegulatedAuthorization or %resource is SubstanceDefinition or %resource is SubscriptionStatus or %resource is SubscriptionTopic) Mappings rim: Entity. Role, or Act rim: N/A
extension	I	0..*	Extension	There are no (further) constraints on this element Element id MessageHeader.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	?! I	0..*	Extension	There are no (further) constraints on this element Element id MessageHeader.modifierExtension Short description Extensions that cannot be ignored Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
event[x]	Σ	1..1		There are no (further) constraints on this element Element id MessageHeader.event[x] Short description Code for the event this message represents or link to event definition Definition Código que identifica o evento que esta mensagem representa e o liga à sua definição. Requirements Drives the behavior associated with this message. Comments The time of the event will be found in the focus resource. The time of the message will be found in Bundle.timestamp. Binding One of the message events defined as part of this version of FHIR. MessageEvent (example) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a w5: FiveWs.what[x] v2: MSH-9.2 rim: ./payload[classCode="CACT" and moodCode="EVN" and isNormalAct()]/code[isNormalDatatype()]/code
eventCoding			Coding	There are no (further) constraints on this element Data type Coding
eventUri			uri	There are no (further) constraints on this element Data type uri
destination	Σ	1..*	BackboneElement	There are no (further) constraints on this element Element id MessageHeader.destination Short description Message destination application(s) Definition Aplicativo(s) de destino de mensagem. Requirements Indicates where message is to be sent for routing purposes. Allows verification of "am I the intended recipient". Comments There SHOULD be at least one destination, but in some circumstances, the source system is unaware of any particular destination system. Data type BackboneElement Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a w5: FiveWs.subject[x] rim: ./communicationFunction[typeCode="RCV"] w5: FiveWs.subject
id		0..0	id	There are no (further) constraints on this element Element id MessageHeader.destination.id Short description Unique id for inter-element referencing Definition ID único para o elemento num recurso (para referências internas). Pode ser qualquer valor de cadeia que não contenha espaços. Data type id Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id MessageHeader.destination.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id MessageHeader.destination.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
name	Σ	0..1	string	There are no (further) constraints on this element Element id MessageHeader.destination.name Short description Name of system Definition Nome da aplicação destino. Requirements May be used for routing of response and/or to support audit. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: MSH-5 rim: unique(./entity[determinerCode="INST" and (classCode=("DEV", "PSN", "ORG"]/name[type='ST' and isNormalDatatype()])
target	Σ I	0..0	Reference(Device PT Core)	There are no (further) constraints on this element Element id MessageHeader.destination.target Short description Particular delivery destination within the destination Definition Referenciar para o recurso Device, no caso o destino seja um dispositivo. Requirements Supports multi-hop routing. Comments References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository. Data type Reference(Device PT Core) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')) or (reference='#' and %rootResource!=%resource)` Mappings rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity) rim: unique(./entity[determinerCode="INST" and (classCode=("DEV", "PSN", "ORG"]
endpoint	Σ	1..1	url	Element id MessageHeader.destination.endpoint Short description Actual destination address or id Definition Endereço ou id do destino da mensagem. Requirements Identifies where to route the message. Comments The id may be a non-resolvable URI for systems that do not use standard network-based addresses. Data type url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: MSH-25 (or MSH-6) rim: ./telecom
receiver	Σ I	1..1	Reference(Organization PT TRV)	Element id MessageHeader.destination.receiver Short description Intended "real-world" recipient for the data Definition Entidade que vai receber os dados. Requirements Allows routing beyond just the application level. Comments References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository. Data type Reference(Organization PT TRV) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')) or (reference='#' and %rootResource!=%resource)` Mappings rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity) w5: FiveWs.subject[x] v2: PRT-5:PRT-4='WAYR' / PRT-8:PRT-4='WAYR' rim: Not directly supported. Could be shared using attentionLine.value with an appropriate keyWordText w5: FiveWs.subject
sender	Σ I	1..1	Reference(Organization PT TRV)	Element id MessageHeader.sender Short description Real world sender of the message Definition Entidade que envia os dados. Requirements Allows routing beyond just the application level. Comments Use case is for where a (trusted) sending system is responsible for multiple organizations, and therefore cannot differentiate based on source endpoint / authentication alone. Data type Reference(Organization PT TRV) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')) or (reference='#' and %rootResource!=%resource)` Mappings rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity) w5: FiveWs.subject[x] v2: PRT-5:PRT-4='WAYR' / PRT-8:PRT-4='WAYR' rim: Not directly supported. Could be shared using attentionLine.value with an appropriate keyWordText w5: FiveWs.subject
enterer	Σ I	0..0	Reference(Practitioner PT Core \| PractitionerRole PT Core)	Element id MessageHeader.enterer Short description The source of the data entry Definition Profissional que registou os dados. Requirements Need to know for audit/traceback requirements and possibly for authorization. Comments Usually only for the request but can be used in a response. Data type Reference(Practitioner PT Core \| PractitionerRole PT Core) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')) or (reference='#' and %rootResource!=%resource)` Mappings rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity) w5: FiveWs.author v2: EVN-5 / ORC-10 / PRT-5:PRT-4='EP' / ROL where ROL.3 is EP or ORC.10 rim: unique(./controlAct[classCode="CACT" and classCode="EVN" and isNormalAct()]/participation[typeCode="ENT" and isNormalParticipation]/role[classCode="ASSIGNED" and isNormalRole()]/player[isNormalEntity() and classCode=("DEV", "PSN") and determinerCode="INST"])
author	Σ I	0..0	Reference(Practitioner PT Core \| PractitionerRole PT Core)	There are no (further) constraints on this element Element id MessageHeader.author Short description The source of the decision Definition Profissional que autorizou o envio dos dados Requirements Need to know for audit/traceback requirements and possibly for authorization. Comments Usually only for the request but can be used in a response. Data type Reference(Practitioner PT Core \| PractitionerRole PT Core) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')) or (reference='#' and %rootResource!=%resource)` Mappings rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity) w5: FiveWs.author v2: ORC-19 / PRT-5:PRT-4='AUT' / ROL where ROL.3 is IP or ORC.12 rim: unique(./controlAct[classCode="CACT" and classCode="EVN" and isNormalAct()]/participation[isHighest(priorityCode) and typeCode="AUT" and isNormalParticipation]/role[classCode="ASSIGNED" and isNormalRole()]/player[isNormalEntity() and classCode=("DEV", "PSN") and determinerCode="INST"])
source	Σ	1..1	BackboneElement	There are no (further) constraints on this element Element id MessageHeader.source Short description Message source application Definition Aplicativo de origem de mensagens Requirements Allows replies, supports audit. Data type BackboneElement Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a w5: FiveWs.actor rim: unique(./communicationFunction[typeCode="SND"])
id		0..0	id	There are no (further) constraints on this element Element id MessageHeader.source.id Short description Unique id for inter-element referencing Definition ID único para o elemento num recurso (para referências internas). Pode ser qualquer valor de cadeia que não contenha espaços. Data type id Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id MessageHeader.source.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id MessageHeader.source.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
name	Σ	0..1	string	Element id MessageHeader.source.name Short description Name of system Definition Nome da aplicação origem dos dados. Requirements May be used to support audit. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: MSH-3 rim: unique(./entity[determinerCode="INST" and classCode="DEV"]/name[type='ST' and isNormalDatatype()])
software	Σ	0..0	string	There are no (further) constraints on this element Element id MessageHeader.source.software Short description Name of software running the system Definition Configuração ou outras informações úteis da aplicação origem Requirements Supports audit and possibly interface engine behavior. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: SFT-3 ( +SFT-1) rim: unique(./entity[determinerCode="INST" and classCode="DEV"]/softwareName[isNormalDatatype()])
version	Σ	0..0	string	There are no (further) constraints on this element Element id MessageHeader.source.version Short description Version of software running Definition Versão da aplicação origem Requirements Supports audit and possibly interface engine behavior. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: SFT-2 rim: (Not supported)
contact	Σ I	0..0	ContactPoint PT Core	There are no (further) constraints on this element Element id MessageHeader.source.contact Short description Details of a Technology mediated contact point (phone, fax, email, etc.) Definition Contacto para suporte, no âmbito das comunicações de mensagens Requirements Allows escalation of technical issues. Data type ContactPoint PT Core Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` cpt-2: A system is required if a value is provided. `value.empty() or system.exists()` Mappings rim: n/a v2: XTN rim: TEL servd: ContactPoint v2: (MSH-22?) rim: unique(./entity[determinerCode="INST" and classCode="DEV"]/scopesRole[normalRole() and classCode="CON" and layer[classCode="PSN"]/telecom[isNormalDatatype()])
endpoint	Σ	1..1	url	Element id MessageHeader.source.endpoint Short description Actual message source address or id Definition Endereço ou id da origem da mensagem. Requirements Identifies where to send responses, may influence security permissions. Comments The id may be a non-resolvable URI for systems that do not use standard network-based addresses. Data type url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: MSH-24 rim: ./telecom[isNormalDatatype()]
responsible	Σ I	0..0	Reference(Practitioner PT Core \| PractitionerRole PT Core \| Organization PT Core)	There are no (further) constraints on this element Element id MessageHeader.responsible Short description Final responsibility for event Definition Entidade ou profissional com a responsabilidade final pelo evento Requirements Need to know for audit/traceback requirements and possibly for authorization. Comments Usually only for the request but can be used in a response. Data type Reference(Practitioner PT Core \| PractitionerRole PT Core \| Organization PT Core) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')) or (reference='#' and %rootResource!=%resource)` Mappings rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity) w5: FiveWs.witness v2: ORC-12 / PRT-5:PRT-4='OP' / PRT-8:PRT-4='OP' / ROL where ROL.3 is RO or ORC.11 rim: unique(./controlAct[classCode="CACT" and classCode="EVN" and isNormalAct()]/participation[isHighest(priorityCode) and typeCode="RESP" and isNormalParticipation]/role[classCode="ASSIGNED" and isNormalRole()]/player[isNormalEntity() and classCode="PSN" and determinerCode="INST"] or ./controlAct[classCode="CACT" and classCode="EVN" and isNormalAct()]/participation[isHighest(priorityCode) and typeCode="RESP" and isNormalParticipation]/role[classCode="ASSIGNED" and isNormalRole()]/scoper[isNormalEntity() and classCode="ORG" and determinerCode="INST"])
reason	Σ	0..0	CodeableConcept PT Core	There are no (further) constraints on this element Element id MessageHeader.reason Short description Concept - reference to a terminology or just text Definition Indica o motivo da ocorrência do evento que é foco desta mensagem. Requirements Need to be able to track why resources are being changed and report in the audit log/history of the resource. May affect authorization. Comments Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination. Data type CodeableConcept PT Core Binding Reason for event occurrence. Example Message Reason Codes (example) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD w5: FiveWs.why[x] v2: EVN.4 / ORC.16 / OBR-31-reason for study / BPO-13-BP indication for use / RXO-20-indication / RXE-27-give indication / RXD-21-indication / RXG-22-indication / RXA-19-indication rim: unique(./controlAct[classCode="CACT" and classCode="EVN" and isNormalAct()]/reasonCode[isNormalDatatype()])
response	Σ	0..1	BackboneElement	There are no (further) constraints on this element Element id MessageHeader.response Short description If this is a reply to prior message Definition Elemento usado no caso de mensagem de resposta Data type BackboneElement Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: MSA rim: ./conveyedAcknowledgement
id		0..0	id	There are no (further) constraints on this element Element id MessageHeader.response.id Short description Unique id for inter-element referencing Definition ID único para o elemento num recurso (para referências internas). Pode ser qualquer valor de cadeia que não contenha espaços. Data type id Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id MessageHeader.response.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id MessageHeader.response.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
identifier	Σ	1..1	id	Element id MessageHeader.response.identifier Short description Id of original message Definition id da mensagem origem enviada que deu origem à resposta. Requirements Allows receiver to know what message is being responded to. Comments RFC 4122 Data type id Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: MSA-2 rim: ./acknowledges.id[isNormalDatatype()]
code	Σ	1..1	codeBinding	Element id MessageHeader.response.code Short description ok \| transient-error \| fatal-error Definition Code that identifies the type of response to the message - whether it was successful or not, and whether it should be resent or not. Requirements Allows the sender of the acknowledge message to know if the request was successful or if action is needed. Comments This is a generic response to the request message. Specific data for the response will be found in MessageHeader.focus. Data type code Binding The kind of response to a message. ResponseType (required) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: MSA-1 rim: ./typeCode[isNormalDatatype()]
details	Σ I	0..1	Reference(OperationOutcome PT TRV)	Element id MessageHeader.response.details Short description Specific list of hints/warnings/errors Definition Detalhes do erro da mensagem. Em caso de code com valor “transient-error” ou “fatal-erro”, referenciar o recurso com os detalhes dos erros ou alertas. Requirements Allows the sender of the message to determine what the specific issues are. Comments This SHALL be contained in the bundle. If any of the issues are errors, the response code SHALL be an error. Data type Reference(OperationOutcome PT TRV) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')) or (reference='#' and %rootResource!=%resource)` Mappings rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2: ERR rim: AcknowledgementDetail or Observation[classCode="ALRT" and moodCode="EVN"]
focus	Σ I	0..*	Reference(Resource)	Element id MessageHeader.focus Short description The actual content of the message Definition Referenciar o(s) recurso(s) raiz da mensagem. Requirements Every message event is about actual data, a single resource, that is identified in the definition of the event, and perhaps some or all linked resources. Comments The data is defined where the transaction type is defined. The transaction data is always included in the bundle that is the full message. Only the root resource is specified. The resources it references should be contained in the bundle but are not also listed here. Multiple repetitions are allowed to cater for merges and other situations with multiple focal targets. Data type Reference(Resource) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')) or (reference='#' and %rootResource!=%resource)` Mappings rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity) rim: unique(./controlAct[classCode="CACT" and classCode="EVN" and isNormalAct()]/participation[typeCode="SUBJ" and isNormalParticipation]/role or ./controlAct[classCode="CACT" and classCode="EVN" and isNormalAct()]/outboundRelationship[typeCode="SBJ" and isNormalActRelatoinship]/target)
id		0..1	id	There are no (further) constraints on this element Element id MessageHeader.focus.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type id Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id MessageHeader.focus.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
reference	Σ I	0..1	string	There are no (further) constraints on this element Element id MessageHeader.focus.reference Short description Literal reference, Relative, internal or absolute URL Definition A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources. Comments Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server. Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a rim: N/A
type	Σ	0..1	uriBinding	Element id MessageHeader.focus.type Short description Type the reference refers to (e.g. "Patient") Definition The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent. The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources). Comments This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified. Data type uri Binding ResourceType (extensible) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a rim: N/A
identifier	Σ	0..1	Identifier	There are no (further) constraints on this element Element id MessageHeader.focus.identifier Short description Logical reference, when literal reference is not known Definition An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference. Comments When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it. Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation\|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any). Data type Identifier Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CX / EI (occasionally, more often EI maps to a resource id or a URL) rim: II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd: Identifier rim: .identifier
display	Σ	0..1	string	There are no (further) constraints on this element Element id MessageHeader.focus.display Short description Text alternative for the resource Definition Plain text narrative that identifies the resource in addition to the resource reference. Comments This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it. Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a rim: N/A
definition	Σ	0..0	canonical(MessageDefinition)	There are no (further) constraints on this element Element id MessageHeader.definition Short description Link to the definition for this message Definition Link permanente para o MessageDefinition da mensagem. Requirements Allows sender to define the expected contents of the message. Comments see Canonical References Data type canonical(MessageDefinition) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a rim: Not directly supported.

O recurso OperationOutcome é referenciado pelo recurso MessageHeader (MessageHeader.response.details) e é usado para fornecer uma descrição mais detalhada de quaisquer problemas que ocorreram durante o processamento de uma mensagem. Para mais informações sobre a implementação deste recurso, no contexto do presente caso de uso, consultar: OperationOutcomePTTRV profile

OperationOutcome	I		OperationOutcome	There are no (further) constraints on this element Element id OperationOutcome Short description Information about the success/failure of an action Definition A collection of error, warning, or information messages that result from a system action. Comments Can result from the failure of a REST call or be part of the response message returned from a request message. Data type OperationOutcome Constraints dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources `contained.contained.empty()` dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated `contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()` dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource `contained.where(((id.exists() and ('#'+id in (%resource.descendants().reference \| %resource.descendants().as(canonical) \| %resource.descendants().as(uri) \| %resource.descendants().as(url)))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(uri) = '#').exists()).not()).trace('unmatched', id).empty()` dom-6: A resource should have narrative for robust management text.`div`.exists() dom-5: If a resource is contained in another resource, it SHALL NOT have a security label `contained.meta.security.empty()` Mappings rim: Entity. Role, or Act rim: Grouping is handled through multiple repetitions from whatever context references the outcomes (no specific grouper required) w5: infrastructure.exchange
id	Σ	1..1	id	There are no (further) constraints on this element Element id OperationOutcome.id Short description Logical id of this artifact Definition The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes. Comments The only time that a resource does not have an id is when it is being submitted to the server using a create operation. Data type id
meta	Σ	0..1	Meta PT Core	There are no (further) constraints on this element Element id OperationOutcome.meta Short description Metadata about the resource Definition The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource. Data type Meta PT Core Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a rim: N/A
implicitRules	Σ ?!	0..1	uri	There are no (further) constraints on this element Element id OperationOutcome.implicitRules Short description A set of rules under which this content was created Definition A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc. Comments Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc. Data type uri Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a
language		0..1	codeBinding	There are no (further) constraints on this element Element id OperationOutcome.language Short description Language of the resource content Definition The base language in which the resource is written. Comments Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute). Data type code Binding IETF language tag Common Languages (preferred) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a
text		0..1	Narrative	There are no (further) constraints on this element Element id OperationOutcome.text Short description Text summary of the resource, for human interpretation Alternate names narrative, html, xhtml, display Definition A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety. Comments Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later. Data type Narrative Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a rim: N/A rim: Act.text?
contained	I	0..*	Resource	There are no (further) constraints on this element Element id OperationOutcome.contained Short description Contained, inline Resources Alternate names inline resources, anonymous resources, contained resources Definition These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope. Comments This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels. Data type Resource Constraints dom-r4b: Containing new R4B resources within R4 resources may cause interoperability issues if instances are shared with R4 systems ($this is Citation or $this is Evidence or $this is EvidenceReport or $this is EvidenceVariable or $this is MedicinalProductDefinition or $this is PackagedProductDefinition or $this is AdministrableProductDefinition or $this is Ingredient or $this is ClinicalUseDefinition or $this is RegulatedAuthorization or $this is SubstanceDefinition or $this is SubscriptionStatus or $this is SubscriptionTopic) implies (%resource is Citation or %resource is Evidence or %resource is EvidenceReport or %resource is EvidenceVariable or %resource is MedicinalProductDefinition or %resource is PackagedProductDefinition or %resource is AdministrableProductDefinition or %resource is Ingredient or %resource is ClinicalUseDefinition or %resource is RegulatedAuthorization or %resource is SubstanceDefinition or %resource is SubscriptionStatus or %resource is SubscriptionTopic) Mappings rim: Entity. Role, or Act rim: N/A
extension	I	0..*	Extension	There are no (further) constraints on this element Element id OperationOutcome.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	?! I	0..*	Extension	There are no (further) constraints on this element Element id OperationOutcome.modifierExtension Short description Extensions that cannot be ignored Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
issue	Σ	1..*	BackboneElement	There are no (further) constraints on this element Element id OperationOutcome.issue Short description A single issue associated with the action Definition Um conjunto de mensagens de erro, de aviso ou de informação que resultam de uma ação do sistema. Data type BackboneElement Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: ERR rim: AcknowledgementDetail or Observation[classCode="ALRT" and moodCode="EVN"]
id		0..1	id	There are no (further) constraints on this element Element id OperationOutcome.issue.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type id Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id OperationOutcome.issue.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id OperationOutcome.issue.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
severity	Σ	1..1	codeBinding	Element id OperationOutcome.issue.severity Short description fatal \| error \| warning \| information Definition Obrigatório usar um dos seguintes elementos: “fatal” - O problema fez com que a ação falhasse e nenhuma verificação adicional foi executada. “error” - O erro é suficientemente importante para fazer com que a ação falhe. “warning” - O problema não é importante o suficiente para fazer com que a ação falhe, mas pode fazer com que seja executada de uma maneira que não seja com a qualidade desejada. “information” - a ação foi executada com sucesso. Requirements Indicates how relevant the issue is to the overall success of the action. Comments This is labeled as "Is Modifier" because applications should not confuse hints and warnings with errors. Data type code Binding How the issue affects the success of the action. IssueSeverity (required) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: ERR-4 rim: ./typeCode[parent::AcknowledgmentDetail] or unique(./inboundRelationship[parent::Observation and typeCode='SUBJ' and isNormalActRelationship()]/source[classCode="OBS" and moodCode="EVN" and implies(code, ActCode#SEV and isNormalAct())/value[xsi:type="CD"]
code	Σ	1..1	codeBinding	There are no (further) constraints on this element Element id OperationOutcome.issue.code Short description Error or warning code Definition Código de problema. Requirements Expresses the issue in a human and computer-friendly way, allowing the requesting system to behave differently based on the type of issue. The required element provides a base level of computable interoperability across all systems for processing an outcome, allowing systems to respond appropriately regardless of the internal system error codes returned. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type code Binding A code that describes the type of issue. IssueType (required) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: ERR-3 rim: ./code
details	Σ	0..1	CodeableConcept PT Core	Element id OperationOutcome.issue.details Short description Concept - reference to a terminology or just text Definition Informação codificada adicional de acordo com o valor no elemento issue.severity Usar o system específico para o negócio, caso exista, ou o system do FHIR: http://terminology.hl7.org/CodeSystem/operation-outcome Comments Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination. Data type CodeableConcept PT Core Sliced: Unordered, Open, by id(Value) Binding A code that provides details as the exact issue. http://hl7.org/fhir/ValueSet/operation-outcome (example) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD v2: ERR-5 rim: ./code
outcomeBroker	Σ	0..1	CodeableConcept PT CoreBinding	There are no (further) constraints on this element Element id OperationOutcome.issue.details:outcomeBroker Short description Concept - reference to a terminology or just text Definition Identifica a lista de erros devolvida pelo broker nacional. Comments Value Set: {{link:https://spms.min-saude.pt/iop/valueset/errorBroker}} Data type CodeableConcept PT Core Binding A code that provides details as the exact issue. Error Broker (preferred) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD v2: ERR-5 rim: ./code
id		0..1	idFixed Value	There are no (further) constraints on this element Element id OperationOutcome.issue.details:outcomeBroker.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type id Fixed value outcomeBroker Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id OperationOutcome.issue.details:outcomeBroker.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
coding	Σ	0..*	Coding PT Core	There are no (further) constraints on this element Element id OperationOutcome.issue.details:outcomeBroker.coding Short description A reference to a code defined by a terminology system Definition A reference to a code defined by a terminology system. Requirements Allows for alternative encodings within a code system, and translations to other code systems. Comments Codes may be defined very casually in enumerations or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Data type Coding PT Core Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim: CV orim: fhir:Coding rdfs:subClassOf dt:CDCoding v2: CE.1-8, CE.10-22 rim: union(., ./translation) orim: fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
text	Σ	1..1	string	There are no (further) constraints on this element Element id OperationOutcome.issue.details:outcomeBroker.text Short description Plain text representation of the concept Definition A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user. Requirements The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source. Comments Very often the text is the same as a displayName of one of the codings. Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE.9. But note many systems use CE.2 for this rim: ./originalText[mediaType/code="text/plain"]/data orim: fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText
outcomeBusinessIOP	Σ	0..1	CodeableConcept PT CoreBinding	There are no (further) constraints on this element Element id OperationOutcome.issue.details:outcomeBusinessIOP Short description Concept - reference to a terminology or just text Definition Identifica listas de erros específicas do negócio. Comments Value Set: {{link:https://spms.min-saude.pt/iop/valueset/errorBusiness}} Data type CodeableConcept PT Core Binding A code that provides details as the exact issue. Error Business (preferred) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD v2: ERR-5 rim: ./code
id		0..1	idFixed Value	There are no (further) constraints on this element Element id OperationOutcome.issue.details:outcomeBusinessIOP.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type id Fixed value outcomeBusinessIOP Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id OperationOutcome.issue.details:outcomeBusinessIOP.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
coding	Σ	0..*	Coding PT Core	There are no (further) constraints on this element Element id OperationOutcome.issue.details:outcomeBusinessIOP.coding Short description A reference to a code defined by a terminology system Definition A reference to a code defined by a terminology system. Requirements Allows for alternative encodings within a code system, and translations to other code systems. Comments Codes may be defined very casually in enumerations or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Data type Coding PT Core Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim: CV orim: fhir:Coding rdfs:subClassOf dt:CDCoding v2: CE.1-8, CE.10-22 rim: union(., ./translation) orim: fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
text	Σ	1..1	string	There are no (further) constraints on this element Element id OperationOutcome.issue.details:outcomeBusinessIOP.text Short description Plain text representation of the concept Definition A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user. Requirements The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source. Comments Very often the text is the same as a displayName of one of the codings. Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE.9. But note many systems use CE.2 for this rim: ./originalText[mediaType/code="text/plain"]/data orim: fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText
diagnostics	Σ	0..1	string	There are no (further) constraints on this element Element id OperationOutcome.issue.diagnostics Short description Additional diagnostic information about the issue Definition Informação adicional sobre o problema Comments This may be a description of how a value is erroneous, a stack dump to help trace the issue or other troubleshooting information. Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: ERR-8 rim: ./text[parent::AcknowledgmentDetail]
location	Σ	0..1	string	There are no (further) constraints on this element Element id OperationOutcome.issue.location Short description Deprecated: Path of element(s) related to issue Definition This element is deprecated because it is XML specific. It is replaced by issue.expression, which is format independent, and simpler to parse. For resource issues, this will be a simple XPath limited to element names, repetition indicators and the default child accessor that identifies one of the elements in the resource that caused this issue to be raised. For HTTP errors, will be "http." + the parameter name. Requirements Allows systems to highlight or otherwise guide users to elements implicated in issues to allow them to be fixed more easily. Comments The root of the XPath is the resource or bundle that generated OperationOutcome. Each XPath SHALL resolve to a single node. This element is deprecated, and is being replaced by expression. Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: ERR-2 rim: ./location[parent::AcknowledgmentDetail]
expression	Σ	0..*	string	There are no (further) constraints on this element Element id OperationOutcome.issue.expression Short description FHIRPath of element(s) related to issue Definition Informação auxiliar que permite que os sistemas orientem os usuários para os recursos ou elementos que causaram os problemas, auxiliando assim a correção dos mesmos. O texto deve respeitar as regras do subconjunto restrito do FHIRPath. Requirements Allows systems to highlight or otherwise guide users to elements implicated in issues to allow them to be fixed more easily. Comments The root of the FHIRPath is the resource or bundle that generated OperationOutcome. Each FHIRPath SHALL resolve to a single node. Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: ERR-2 rim: ./location[parent::AcknowledgmentDetail]

O recurso Parameter é referenciado pelo recurso MessageHeader (MessageHeader.focus[])* e identifica os parametros com a resposta à pesquisa de informação da vacina. Para mais informações sobre a implementação deste recurso, no contexto do presente caso de uso, consultar: ParametersPTPSRINF profile

Parameters			Parameters	There are no (further) constraints on this element Element id Parameters Short description Operation Request or Response Definition This resource is a non-persisted resource used to pass information into and back from an operation. It has no other use, and there is no RESTful endpoint associated with it. Comments The parameters that may be used are defined by the OperationDefinition resource. Data type Parameters Mappings rim: Entity. Role, or Act v2: n/a rim: n/a w5: infrastructure.exchange
id	Σ	1..1	id	There are no (further) constraints on this element Element id Parameters.id Short description Logical id of this artifact Definition The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes. Comments The only time that a resource does not have an id is when it is being submitted to the server using a create operation. Data type id
meta	Σ	0..1	Meta	There are no (further) constraints on this element Element id Parameters.meta Short description Metadata about the resource Definition The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource. Data type Meta Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a rim: N/A
id		0..1	id	There are no (further) constraints on this element Element id Parameters.meta.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type id Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Parameters.meta.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
versionId	Σ	0..1	id	There are no (further) constraints on this element Element id Parameters.meta.versionId Short description Version specific identifier Definition The version specific identifier, as it appears in the version portion of the URL. This value changes when the resource is created, updated, or deleted. Comments The server assigns this value, and ignores what the client specifies, except in the case that the server is imposing version integrity on updates/deletes. Data type id Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a
lastUpdated	Σ	0..1	instant	There are no (further) constraints on this element Element id Parameters.meta.lastUpdated Short description When the resource version last changed Definition When the resource last changed - e.g. when the version changed. Comments This value is always populated except when the resource is first being created. The server / resource manager sets this value; what a client provides is irrelevant. This is equivalent to the HTTP Last-Modified and SHOULD have the same value on a read interaction. Data type instant Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a
source	Σ	0..1	uri	There are no (further) constraints on this element Element id Parameters.meta.source Short description Identifies where the resource comes from Definition A uri that identifies the source system of the resource. This provides a minimal amount of Provenance information that can be used to track or differentiate the source of information in the resource. The source may identify another FHIR server, document, message, database, etc. Comments In the provenance resource, this corresponds to Provenance.entity.what[x]. The exact use of the source (and the implied Provenance.entity.role) is left to implementer discretion. Only one nominated source is allowed; for additional provenance details, a full Provenance resource should be used. This element can be used to indicate where the current master source of a resource that has a canonical URL if the resource is no longer hosted at the canonical URL. Data type uri Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a
profile	Σ	0..*	canonical(StructureDefinition)Fixed Value	Element id Parameters.meta.profile Short description Profiles this resource claims to conform to Definition A list of profiles (references to StructureDefinition resources) that this resource claims to conform to. The URL is a reference to StructureDefinition.url. Comments It is up to the server and/or other infrastructure of policy to determine whether/how these claims are verified and/or updated over time. The list of profile URLs is a set. Data type canonical(StructureDefinition) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Fixed value https://spms.min-saude.pt/fhir-r4B/iop/StructureDefinition/ParametersPTPSRINF Mappings rim: n/a
security	Σ	0..*	CodingBinding	There are no (further) constraints on this element Element id Parameters.meta.security Short description Security Labels applied to this resource Definition Security labels applied to this resource. These tags connect specific resources to the overall security policy and infrastructure. Comments The security labels can be updated without changing the stated version of the resource. The list of security labels is a set. Uniqueness is based the system/code, and version and display are ignored. Data type Coding Binding SecurityLabels (extensible) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim: CV orim: fhir:Coding rdfs:subClassOf dt:CDCoding
tag	Σ	0..*	Coding	There are no (further) constraints on this element Element id Parameters.meta.tag Short description Tags applied to this resource Definition Tags applied to this resource. Tags are intended to be used to identify and relate resources to process and workflow, and applications are not required to consider the tags when interpreting the meaning of a resource. Comments The tags can be updated without changing the stated version of the resource. The list of tags is a set. Uniqueness is based the system/code, and version and display are ignored. Data type Coding Binding Common Tags (example) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim: CV orim: fhir:Coding rdfs:subClassOf dt:CDCoding
implicitRules	Σ ?!	0..1	uri	There are no (further) constraints on this element Element id Parameters.implicitRules Short description A set of rules under which this content was created Definition A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc. Comments Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc. Data type uri Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a
language		0..1	codeBinding	There are no (further) constraints on this element Element id Parameters.language Short description Language of the resource content Definition The base language in which the resource is written. Comments Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute). Data type code Binding IETF language tag Common Languages (preferred) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a
parameter	Σ I	0..*	BackboneElement	Element id Parameters.parameter Short description Operation Parameter Definition Identifica o parâmetro transmitido ou recebido durante a operação. Data type BackboneElement Sliced: Unordered, Open At End, by name(Value) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` inv-1: A parameter must have one and only one of (value, resource, part) `(part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists()))` Mappings rim: n/a
(All Slices)				There are no (further) constraints on this element
id		0..1	id	There are no (further) constraints on this element Element id Parameters.parameter.id Short description Unique id for inter-element referencing Definition ID único para o elemento num recurso (para referências internas). Pode ser qualquer valor de cadeia que não contenha espaços. Data type id Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Parameters.parameter.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id Parameters.parameter.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
name	Σ	1..1	string	There are no (further) constraints on this element Element id Parameters.parameter.name Short description Name from the definition Definition Nome do parâmetro (em texto) Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a
value[x]	Σ I	0..1		There are no (further) constraints on this element Element id Parameters.parameter.value[x] Short description If parameter is a data type Definition Indicação do tipo de dados do parameter Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a
valueBase64Binary			base64Binary	There are no (further) constraints on this element Data type base64Binary
valueBoolean			boolean	There are no (further) constraints on this element Data type boolean
valueCanonical			canonical()	There are no (further) constraints on this element Data type canonical()
valueCode			code	There are no (further) constraints on this element Data type code
valueDate			date	There are no (further) constraints on this element Data type date
valueDateTime			dateTime	There are no (further) constraints on this element Data type dateTime
valueDecimal			decimal	There are no (further) constraints on this element Data type decimal
valueId			id	There are no (further) constraints on this element Data type id
valueInstant			instant	There are no (further) constraints on this element Data type instant
valueInteger			integer	There are no (further) constraints on this element Data type integer
valueMarkdown			markdown	There are no (further) constraints on this element Data type markdown
valueOid			oid	There are no (further) constraints on this element Data type oid
valuePositiveInt			positiveInt	There are no (further) constraints on this element Data type positiveInt
valueString			string	There are no (further) constraints on this element Data type string
valueTime			time	There are no (further) constraints on this element Data type time
valueUnsignedInt			unsignedInt	There are no (further) constraints on this element Data type unsignedInt
valueUri			uri	There are no (further) constraints on this element Data type uri
valueUrl			url	There are no (further) constraints on this element Data type url
valueUuid			uuid	There are no (further) constraints on this element Data type uuid
valueAddress			Address	There are no (further) constraints on this element Data type Address
valueAge			Age	There are no (further) constraints on this element Data type Age
valueAnnotation			Annotation	There are no (further) constraints on this element Data type Annotation
valueAttachment			Attachment	There are no (further) constraints on this element Data type Attachment
valueCodeableConcept			CodeableConcept	There are no (further) constraints on this element Data type CodeableConcept
valueCoding			Coding	There are no (further) constraints on this element Data type Coding
valueContactPoint			ContactPoint	There are no (further) constraints on this element Data type ContactPoint
valueCount			Count	There are no (further) constraints on this element Data type Count
valueDistance			Distance	There are no (further) constraints on this element Data type Distance
valueDuration			Duration	There are no (further) constraints on this element Data type Duration
valueHumanName			HumanName	There are no (further) constraints on this element Data type HumanName
valueIdentifier			Identifier	There are no (further) constraints on this element Data type Identifier
valueMoney			Money	There are no (further) constraints on this element Data type Money
valuePeriod			Period	There are no (further) constraints on this element Data type Period
valueQuantity			Quantity	There are no (further) constraints on this element Data type Quantity
valueRange			Range	There are no (further) constraints on this element Data type Range
valueRatio			Ratio	There are no (further) constraints on this element Data type Ratio
valueSampledData			SampledData	There are no (further) constraints on this element Data type SampledData
valueSignature			Signature	There are no (further) constraints on this element Data type Signature
valueTiming			Timing	There are no (further) constraints on this element Data type Timing
valueContactDetail			ContactDetail	There are no (further) constraints on this element Data type ContactDetail
valueContributor			Contributor	There are no (further) constraints on this element Data type Contributor
valueDataRequirement			DataRequirement	There are no (further) constraints on this element Data type DataRequirement
valueExpression			Expression	There are no (further) constraints on this element Data type Expression
valueParameterDefinition			ParameterDefinition	There are no (further) constraints on this element Data type ParameterDefinition
valueRelatedArtifact			RelatedArtifact	There are no (further) constraints on this element Data type RelatedArtifact
valueTriggerDefinition			TriggerDefinition	There are no (further) constraints on this element Data type TriggerDefinition
valueUsageContext			UsageContext	There are no (further) constraints on this element Data type UsageContext
valueDosage			Dosage	There are no (further) constraints on this element Data type Dosage
valueMeta			Meta	There are no (further) constraints on this element Data type Meta
valueReference			Reference()	There are no (further) constraints on this element Data type Reference()
resource	Σ I	0..1	Resource	There are no (further) constraints on this element Element id Parameters.parameter.resource Short description If parameter is a whole resource Definition Se o parâmetro corresponder ao recurso inteiro. Comments When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods. Data type Resource Mappings rim: Entity. Role, or Act
part	Σ	0..*	see (parameter)	There are no (further) constraints on this element Element id Parameters.parameter.part Short description Named part of a multi-part parameter Definition Identifica uma parte de um parâmetro com várias partes. Comments Only one level of nested parameters is allowed.
patientStatus	Σ I	0..0	BackboneElement	Element id Parameters.parameter:patientStatus Short description Operation Parameter Definition Identifica o parâmetro transmitido durante a operação. Data type BackboneElement Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` inv-1: A parameter must have one and only one of (value, resource, part) `(part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists()))` Mappings rim: n/a
vaccineInfo	Σ I	0..*	BackboneElement	There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo Short description Operation Parameter Definition Identifica o parâmetro transmitido ou recebido durante a operação. Data type BackboneElement Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` inv-1: A parameter must have one and only one of (value, resource, part) `(part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists()))` Mappings rim: n/a
id		0..1	id	There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.id Short description Unique id for inter-element referencing Definition ID único para o elemento num recurso (para referências internas). Pode ser qualquer valor de cadeia que não contenha espaços. Data type id Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
name	Σ	1..1	stringFixed Value	Element id Parameters.parameter:vaccineInfo.name Short description Name from the definition Definition Nome do parâmetro (em texto) Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Fixed value InformaçãoDaVacina Mappings rim: n/a
value[x]	Σ I	0..0		There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.value[x] Short description If parameter is a data type Definition Indicação do tipo de dados do parameter Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a
resource	Σ I	0..0	Resource	There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.resource Short description If parameter is a whole resource Definition Se o parâmetro corresponder ao recurso inteiro. Comments When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods. Data type Resource Mappings rim: Entity. Role, or Act
part	Σ	0..*	see (parameter)	Element id Parameters.parameter:vaccineInfo.part Short description Named part of a multi-part parameter Definition Identifica uma parte de um parâmetro com várias partes. Comments Only one level of nested parameters is allowed. Sliced: Unordered, Open, by name(Value)
vaccineCode	Σ	0..*	see (parameter)	There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.part:vaccineCode Short description Named part of a multi-part parameter Definition Identifica uma parte de um parâmetro com várias partes. Comments Only one level of nested parameters is allowed.
id		0..1	id	There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.part:vaccineCode.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type id Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.part:vaccineCode.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.part:vaccineCode.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
name	Σ	1..1	stringFixed Value	Element id Parameters.parameter:vaccineInfo.part:vaccineCode.name Short description Name from the definition Definition The name of the parameter (reference to the operation definition). Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Fixed value CodigoVacina Mappings rim: n/a
value[x]	Σ I	0..0		Element id Parameters.parameter:vaccineInfo.part:vaccineCode.value[x] Short description Concept - reference to a terminology or just text Definition A concept that may be defined by a formal reference to a terminology or ontology or may be provided by text. Comments Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination. Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD
resource	Σ I	0..0	Resource	There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.part:vaccineCode.resource Short description If parameter is a whole resource Definition If the parameter is a whole resource. Comments When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods. Data type Resource Mappings rim: Entity. Role, or Act
part	Σ	0..*	see (parameter)	Element id Parameters.parameter:vaccineInfo.part:vaccineCode.part Short description Named part of a multi-part parameter Definition A named part of a multi-part parameter. Comments Only one level of nested parameters is allowed. Sliced: Unordered, Open, by name(Value)
vaccine	Σ	0..*	see (parameter)	There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.part:vaccineCode.part:vaccine Short description Named part of a multi-part parameter Definition A named part of a multi-part parameter. Comments Only one level of nested parameters is allowed.
id		0..1	id	There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.part:vaccineCode.part:vaccine.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type id Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.part:vaccineCode.part:vaccine.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.part:vaccineCode.part:vaccine.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
name	Σ	1..1	stringFixed Value	Element id Parameters.parameter:vaccineInfo.part:vaccineCode.part:vaccine.name Short description Name from the definition Definition The name of the parameter (reference to the operation definition). Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Fixed value Vacina Mappings rim: n/a
value[x]	Σ I	0..1	Binding	Element id Parameters.parameter:vaccineInfo.part:vaccineCode.part:vaccine.value[x] Short description Concept - reference to a terminology or just text Definition A concept that may be defined by a formal reference to a terminology or ontology or may be provided by text. Comments Value Set Name: Vaccine Binding https://www.ctc.min-saude.pt/catalogos/vacinas (required) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD
valueCodeableConcept			CodeableConcept PT Core	Data type CodeableConcept PT Core
resource	Σ I	0..1	Resource	There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.part:vaccineCode.part:vaccine.resource Short description If parameter is a whole resource Definition If the parameter is a whole resource. Comments When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods. Data type Resource Mappings rim: Entity. Role, or Act
part	Σ	0..*	see (parameter)	There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.part:vaccineCode.part:vaccine.part Short description Named part of a multi-part parameter Definition A named part of a multi-part parameter. Comments Only one level of nested parameters is allowed.
immunoglobulin	Σ	0..*	see (parameter)	There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.part:vaccineCode.part:immunoglobulin Short description Named part of a multi-part parameter Definition A named part of a multi-part parameter. Comments Only one level of nested parameters is allowed.
id		0..1	id	There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.part:vaccineCode.part:immunoglobulin.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type id Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.part:vaccineCode.part:immunoglobulin.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.part:vaccineCode.part:immunoglobulin.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
name	Σ	1..1	stringFixed Value	Element id Parameters.parameter:vaccineInfo.part:vaccineCode.part:immunoglobulin.name Short description Name from the definition Definition The name of the parameter (reference to the operation definition). Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Fixed value Imunoglobulina Mappings rim: n/a
value[x]	Σ I	0..1	Binding	Element id Parameters.parameter:vaccineInfo.part:vaccineCode.part:immunoglobulin.value[x] Short description Concept - reference to a terminology or just text Definition A concept that may be defined by a formal reference to a terminology or ontology or may be provided by text. Comments Value Set Name: Immunoglobulin Binding https://www.ctc.min-saude.pt/catalogos/vacinas (required) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD
valueCodeableConcept			CodeableConcept PT Core	Data type CodeableConcept PT Core
resource	Σ I	0..1	Resource	There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.part:vaccineCode.part:immunoglobulin.resource Short description If parameter is a whole resource Definition If the parameter is a whole resource. Comments When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods. Data type Resource Mappings rim: Entity. Role, or Act
part	Σ	0..*	see (parameter)	There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.part:vaccineCode.part:immunoglobulin.part Short description Named part of a multi-part parameter Definition A named part of a multi-part parameter. Comments Only one level of nested parameters is allowed.
vaccineType	Σ	0..*	see (parameter)	There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.part:vaccineType Short description Named part of a multi-part parameter Definition Identifica uma parte de um parâmetro com várias partes. Comments Only one level of nested parameters is allowed.
id		0..1	id	There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.part:vaccineType.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type id Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.part:vaccineType.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.part:vaccineType.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
name	Σ	1..1	stringFixed Value	Element id Parameters.parameter:vaccineInfo.part:vaccineType.name Short description Name from the definition Definition The name of the parameter (reference to the operation definition). Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Fixed value TipoVacina Mappings rim: n/a
value[x]	Σ I	0..1		Element id Parameters.parameter:vaccineInfo.part:vaccineType.value[x] Short description Concept - reference to a terminology or just text Definition A concept that may be defined by a formal reference to a terminology or ontology or may be provided by text. Comments Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination. Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD
valueCodeableConcept			CodeableConcept INT PT Core	Data type CodeableConcept INT PT Core
id		0..1	id	There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.part:vaccineType.value[x].id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type id Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.part:vaccineType.value[x].extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
coding	Σ	0..*	Coding	There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.part:vaccineType.value[x].coding Short description Code defined by a terminology system Definition A reference to a code defined by a terminology system. Requirements Allows for alternative encodings within a code system, and translations to other code systems. Comments Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. Data type Coding Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim: CV orim: fhir:Coding rdfs:subClassOf dt:CDCoding v2: CE.1-8, CE.10-22 rim: union(., ./translation) orim: fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
id		0..1	id	There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.part:vaccineType.value[x].coding.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type id Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.part:vaccineType.value[x].coding.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
system	Σ	1..1	uriFixed Value	Element id Parameters.parameter:vaccineInfo.part:vaccineType.value[x].coding.system Short description Identity of the terminology system Definition The identification of the code system that defines the meaning of the symbol in the code. Requirements Need to be unambiguous about the source of the definition of the symbol. Comments The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously. Data type uri Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Fixed value https://spms.min-saude.pt/vacinas/CodeSystem/vaccineType Mappings rim: n/a v2: CE.3 rim:* ./codeSystem orim: fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem
version	Σ	0..1	string	There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.part:vaccineType.value[x].coding.version Short description Version of the system - if relevant Definition The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged. Comments Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date. Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE.7 rim:* ./codeSystemVersion orim: fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion
code	Σ	1..1	code	There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.part:vaccineType.value[x].coding.code Short description Symbol in syntax defined by the system Definition A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination). Requirements Need to refer to a particular code in the system. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type code Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE.1 rim:* ./code orim: fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code
display	Σ	0..1	string	There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.part:vaccineType.value[x].coding.display Short description Representation defined by the system Definition A representation of the meaning of the code in the system, following the rules of the system. Requirements Need to be able to carry a human-readable meaning of the code for readers that do not know the system. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE.2 - but note this is not well followed rim:* CV.displayName orim: fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName
userSelected	Σ	0..1	boolean	There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.part:vaccineType.value[x].coding.userSelected Short description If this coding was chosen directly by the user Definition Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays). Requirements This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing. Comments Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely. Data type boolean Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: Sometimes implied by being first rim: CD.codingRationale orim: fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]
text	Σ	1..1	string	There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.part:vaccineType.value[x].text Short description Plain text representation of the concept Definition A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user. Requirements The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source. Comments Very often the text is the same as a displayName of one of the codings. Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE.9. But note many systems use CE.2 for this rim: ./originalText[mediaType/code="text/plain"]/data orim: fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText
resource	Σ I	0..0	Resource	There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.part:vaccineType.resource Short description If parameter is a whole resource Definition If the parameter is a whole resource. Comments When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods. Data type Resource Mappings rim: Entity. Role, or Act
part	Σ	0..0	see (parameter)	There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.part:vaccineType.part Short description Named part of a multi-part parameter Definition A named part of a multi-part parameter. Comments Only one level of nested parameters is allowed.
vaccineRouteAdministration	Σ	0..*	see (parameter)	There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.part:vaccineRouteAdministration Short description Named part of a multi-part parameter Definition Identifica uma parte de um parâmetro com várias partes. Comments Only one level of nested parameters is allowed.
id		0..1	id	There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.part:vaccineRouteAdministration.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type id Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.part:vaccineRouteAdministration.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.part:vaccineRouteAdministration.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
name	Σ	1..1	stringFixed Value	Element id Parameters.parameter:vaccineInfo.part:vaccineRouteAdministration.name Short description Name from the definition Definition The name of the parameter (reference to the operation definition). Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Fixed value ViaAdministracaoVacina Mappings rim: n/a
value[x]	Σ I	0..1	Binding	Element id Parameters.parameter:vaccineInfo.part:vaccineRouteAdministration.value[x] Short description Concept - reference to a terminology or just text Definition A concept that may be defined by a formal reference to a terminology or ontology or may be provided by text. Comments Value Set Name: RouteOfAdministration Binding https://www.ctc.min-saude.pt/catalogos/apoio-ao-registo-da-medicacao (required) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD
valueCodeableConcept			CodeableConcept PT Core	Data type CodeableConcept PT Core
resource	Σ I	0..0	Resource	There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.part:vaccineRouteAdministration.resource Short description If parameter is a whole resource Definition If the parameter is a whole resource. Comments When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods. Data type Resource Mappings rim: Entity. Role, or Act
part	Σ	0..0	see (parameter)	There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.part:vaccineRouteAdministration.part Short description Named part of a multi-part parameter Definition A named part of a multi-part parameter. Comments Only one level of nested parameters is allowed.
vaccineAnatomicLocation	Σ	0..*	see (parameter)	There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.part:vaccineAnatomicLocation Short description Named part of a multi-part parameter Definition Identifica uma parte de um parâmetro com várias partes. Comments Only one level of nested parameters is allowed.
id		0..1	id	There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.part:vaccineAnatomicLocation.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type id Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.part:vaccineAnatomicLocation.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.part:vaccineAnatomicLocation.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
name	Σ	1..1	stringFixed Value	Element id Parameters.parameter:vaccineInfo.part:vaccineAnatomicLocation.name Short description Name from the definition Definition The name of the parameter (reference to the operation definition). Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Fixed value LocalizacaoAnatomicaVacina Mappings rim: n/a
value[x]	Σ I	0..0		There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.part:vaccineAnatomicLocation.value[x] Short description If parameter is a data type Definition Conveys the content if the parameter is a data type. Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a
resource	Σ I	0..0	Resource	There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.part:vaccineAnatomicLocation.resource Short description If parameter is a whole resource Definition If the parameter is a whole resource. Comments When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods. Data type Resource Mappings rim: Entity. Role, or Act
part	Σ	0..*	see (parameter)	Element id Parameters.parameter:vaccineInfo.part:vaccineAnatomicLocation.part Short description Named part of a multi-part parameter Definition A named part of a multi-part parameter. Comments Only one level of nested parameters is allowed. Sliced: Unordered, Open, by name(Value)
site	Σ	0..*	see (parameter)	There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.part:vaccineAnatomicLocation.part:site Short description Named part of a multi-part parameter Definition A named part of a multi-part parameter. Comments Only one level of nested parameters is allowed.
id		0..1	id	There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.part:vaccineAnatomicLocation.part:site.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type id Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.part:vaccineAnatomicLocation.part:site.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.part:vaccineAnatomicLocation.part:site.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
name	Σ	1..1	stringFixed Value	Element id Parameters.parameter:vaccineInfo.part:vaccineAnatomicLocation.part:site.name Short description Name from the definition Definition The name of the parameter (reference to the operation definition). Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Fixed value LocalizacaoVacina Mappings rim: n/a
value[x]	Σ I	0..1	Binding	Element id Parameters.parameter:vaccineInfo.part:vaccineAnatomicLocation.part:site.value[x] Short description Concept - reference to a terminology or just text Definition A concept that may be defined by a formal reference to a terminology or ontology or may be provided by text. Comments Value Set Name: AnatomicalSctruture Binding https://www.ctc.min-saude.pt/catalogos/apoio-ao-registo-clinico (required) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD
valueCodeableConcept			CodeableConcept PT Core	Data type CodeableConcept PT Core
resource	Σ I	0..1	Resource	There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.part:vaccineAnatomicLocation.part:site.resource Short description If parameter is a whole resource Definition If the parameter is a whole resource. Comments When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods. Data type Resource Mappings rim: Entity. Role, or Act
part	Σ	0..*	see (parameter)	There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.part:vaccineAnatomicLocation.part:site.part Short description Named part of a multi-part parameter Definition A named part of a multi-part parameter. Comments Only one level of nested parameters is allowed.
laterality	Σ	0..*	see (parameter)	There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.part:vaccineAnatomicLocation.part:laterality Short description Named part of a multi-part parameter Definition A named part of a multi-part parameter. Comments Only one level of nested parameters is allowed.
id		0..1	id	There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.part:vaccineAnatomicLocation.part:laterality.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type id Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.part:vaccineAnatomicLocation.part:laterality.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.part:vaccineAnatomicLocation.part:laterality.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
name	Σ	1..1	stringFixed Value	Element id Parameters.parameter:vaccineInfo.part:vaccineAnatomicLocation.part:laterality.name Short description Name from the definition Definition The name of the parameter (reference to the operation definition). Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Fixed value LateralidadeLocalizacaoVacina Mappings rim: n/a
value[x]	Σ I	0..1	Binding	Element id Parameters.parameter:vaccineInfo.part:vaccineAnatomicLocation.part:laterality.value[x] Short description Concept - reference to a terminology or just text Definition A concept that may be defined by a formal reference to a terminology or ontology or may be provided by text. Comments Value Set Name: Laterality Binding https://www.ctc.min-saude.pt/catalogos/apoio-ao-registo-clinico (required) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD
valueCodeableConcept			CodeableConcept PT Core	Data type CodeableConcept PT Core
resource	Σ I	0..0	Resource	There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.part:vaccineAnatomicLocation.part:laterality.resource Short description If parameter is a whole resource Definition If the parameter is a whole resource. Comments When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods. Data type Resource Mappings rim: Entity. Role, or Act
part	Σ	0..0	see (parameter)	There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.part:vaccineAnatomicLocation.part:laterality.part Short description Named part of a multi-part parameter Definition A named part of a multi-part parameter. Comments Only one level of nested parameters is allowed.
hasLaterality	Σ	0..*	see (parameter)	There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.part:vaccineAnatomicLocation.part:hasLaterality Short description Named part of a multi-part parameter Definition A named part of a multi-part parameter. Comments Only one level of nested parameters is allowed.
id		0..1	id	There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.part:vaccineAnatomicLocation.part:hasLaterality.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type id Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.part:vaccineAnatomicLocation.part:hasLaterality.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.part:vaccineAnatomicLocation.part:hasLaterality.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
name	Σ	1..1	stringFixed Value	Element id Parameters.parameter:vaccineInfo.part:vaccineAnatomicLocation.part:hasLaterality.name Short description Name from the definition Definition The name of the parameter (reference to the operation definition). Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Fixed value ExistenciaLateralidade Mappings rim: n/a
value[x]	Σ I	0..1		There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.part:vaccineAnatomicLocation.part:hasLaterality.value[x] Short description If parameter is a data type Definition Conveys the content if the parameter is a data type. Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a
valueBoolean			boolean	Data type boolean
resource	Σ I	0..0	Resource	There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.part:vaccineAnatomicLocation.part:hasLaterality.resource Short description If parameter is a whole resource Definition If the parameter is a whole resource. Comments When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods. Data type Resource Mappings rim: Entity. Role, or Act
part	Σ	0..0	see (parameter)	There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.part:vaccineAnatomicLocation.part:hasLaterality.part Short description Named part of a multi-part parameter Definition A named part of a multi-part parameter. Comments Only one level of nested parameters is allowed.
vaccineAdverseReaction	Σ	0..*	see (parameter)	There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.part:vaccineAdverseReaction Short description Named part of a multi-part parameter Definition Identifica uma parte de um parâmetro com várias partes. Comments Only one level of nested parameters is allowed.
id		0..1	id	There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.part:vaccineAdverseReaction.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type id Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.part:vaccineAdverseReaction.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.part:vaccineAdverseReaction.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
name	Σ	1..1	stringFixed Value	Element id Parameters.parameter:vaccineInfo.part:vaccineAdverseReaction.name Short description Name from the definition Definition The name of the parameter (reference to the operation definition). Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Fixed value ReacoesAdversasVacina Mappings rim: n/a
value[x]	Σ I	0..1	Binding	Element id Parameters.parameter:vaccineInfo.part:vaccineAdverseReaction.value[x] Short description Concept - reference to a terminology or just text Definition A concept that may be defined by a formal reference to a terminology or ontology or may be provided by text. Comments Value Set Name: AdverseEvent Binding https://www.ctc.min-saude.pt/catalogos/alergias-e-outras-reacoes-adversas (required) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD
valueCodeableConcept			CodeableConcept PT Core	Data type CodeableConcept PT Core
resource	Σ I	0..0	Resource	There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.part:vaccineAdverseReaction.resource Short description If parameter is a whole resource Definition If the parameter is a whole resource. Comments When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods. Data type Resource Mappings rim: Entity. Role, or Act
part	Σ	0..0	see (parameter)	There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.part:vaccineAdverseReaction.part Short description Named part of a multi-part parameter Definition A named part of a multi-part parameter. Comments Only one level of nested parameters is allowed.
vaccineNoVaccinationMotive	Σ	0..*	see (parameter)	There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.part:vaccineNoVaccinationMotive Short description Named part of a multi-part parameter Definition Identifica uma parte de um parâmetro com várias partes. Comments Only one level of nested parameters is allowed.
id		0..1	id	There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.part:vaccineNoVaccinationMotive.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type id Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.part:vaccineNoVaccinationMotive.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.part:vaccineNoVaccinationMotive.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
name	Σ	1..1	stringFixed Value	Element id Parameters.parameter:vaccineInfo.part:vaccineNoVaccinationMotive.name Short description Name from the definition Definition The name of the parameter (reference to the operation definition). Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Fixed value MotivoNaoAdministracaoVacina Mappings rim: n/a
value[x]	Σ I	0..0		Element id Parameters.parameter:vaccineInfo.part:vaccineNoVaccinationMotive.value[x] Short description Concept - reference to a terminology or just text Definition A concept that may be defined by a formal reference to a terminology or ontology or may be provided by text. Comments Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination. Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD
resource	Σ I	0..0	Resource	There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.part:vaccineNoVaccinationMotive.resource Short description If parameter is a whole resource Definition If the parameter is a whole resource. Comments When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods. Data type Resource Mappings rim: Entity. Role, or Act
part	Σ	0..*	see (parameter)	Element id Parameters.parameter:vaccineInfo.part:vaccineNoVaccinationMotive.part Short description Named part of a multi-part parameter Definition A named part of a multi-part parameter. Comments Only one level of nested parameters is allowed. Sliced: Unordered, Open, by name(Value)
motiveGroup	Σ	0..*	see (parameter)	There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.part:vaccineNoVaccinationMotive.part:motiveGroup Short description Named part of a multi-part parameter Definition A named part of a multi-part parameter. Comments Only one level of nested parameters is allowed.
id		0..1	id	There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.part:vaccineNoVaccinationMotive.part:motiveGroup.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type id Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.part:vaccineNoVaccinationMotive.part:motiveGroup.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.part:vaccineNoVaccinationMotive.part:motiveGroup.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
name	Σ	1..1	stringFixed Value	Element id Parameters.parameter:vaccineInfo.part:vaccineNoVaccinationMotive.part:motiveGroup.name Short description Name from the definition Definition The name of the parameter (reference to the operation definition). Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Fixed value GrupoMotivo Mappings rim: n/a
value[x]	Σ I	0..1	Binding	Element id Parameters.parameter:vaccineInfo.part:vaccineNoVaccinationMotive.part:motiveGroup.value[x] Short description Concept - reference to a terminology or just text Definition A concept that may be defined by a formal reference to a terminology or ontology or may be provided by text. Comments Value Set Name: ForecastStatus Binding https://www.ctc.min-saude.pt/catalogos/vacinas (required) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD
valueCodeableConcept			CodeableConcept PT Core	Data type CodeableConcept PT Core
resource	Σ I	0..0	Resource	There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.part:vaccineNoVaccinationMotive.part:motiveGroup.resource Short description If parameter is a whole resource Definition If the parameter is a whole resource. Comments When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods. Data type Resource Mappings rim: Entity. Role, or Act
part	Σ	0..0	see (parameter)	There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.part:vaccineNoVaccinationMotive.part:motiveGroup.part Short description Named part of a multi-part parameter Definition A named part of a multi-part parameter. Comments Only one level of nested parameters is allowed.
motive	Σ	0..*	see (parameter)	There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.part:vaccineNoVaccinationMotive.part:motive Short description Named part of a multi-part parameter Definition A named part of a multi-part parameter. Comments Only one level of nested parameters is allowed.
id		0..1	id	There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.part:vaccineNoVaccinationMotive.part:motive.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type id Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.part:vaccineNoVaccinationMotive.part:motive.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.part:vaccineNoVaccinationMotive.part:motive.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
name	Σ	1..1	stringFixed Value	Element id Parameters.parameter:vaccineInfo.part:vaccineNoVaccinationMotive.part:motive.name Short description Name from the definition Definition The name of the parameter (reference to the operation definition). Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Fixed value Motivo Mappings rim: n/a
value[x]	Σ I	0..1	Binding	Element id Parameters.parameter:vaccineInfo.part:vaccineNoVaccinationMotive.part:motive.value[x] Short description Concept - reference to a terminology or just text Definition A concept that may be defined by a formal reference to a terminology or ontology or may be provided by text. Comments Value Set Name: ReasonVaccineNotAdministered Binding https://www.ctc.min-saude.pt/catalogos/vacinas (required) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD
valueCodeableConcept			CodeableConcept PT Core	Data type CodeableConcept PT Core
resource	Σ I	0..0	Resource	There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.part:vaccineNoVaccinationMotive.part:motive.resource Short description If parameter is a whole resource Definition If the parameter is a whole resource. Comments When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods. Data type Resource Mappings rim: Entity. Role, or Act
part	Σ	0..0	see (parameter)	There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.part:vaccineNoVaccinationMotive.part:motive.part Short description Named part of a multi-part parameter Definition A named part of a multi-part parameter. Comments Only one level of nested parameters is allowed.
vaccineDiseases	Σ	0..*	see (parameter)	There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.part:vaccineDiseases Short description Named part of a multi-part parameter Definition Identifica uma parte de um parâmetro com várias partes. Comments Only one level of nested parameters is allowed.
id		0..1	id	There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.part:vaccineDiseases.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type id Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.part:vaccineDiseases.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.part:vaccineDiseases.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
name	Σ	1..1	stringFixed Value	Element id Parameters.parameter:vaccineInfo.part:vaccineDiseases.name Short description Name from the definition Definition The name of the parameter (reference to the operation definition). Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Fixed value DoencaVacina Mappings rim: n/a
value[x]	Σ I	0..1	Binding	Element id Parameters.parameter:vaccineInfo.part:vaccineDiseases.value[x] Short description Concept - reference to a terminology or just text Definition A concept that may be defined by a formal reference to a terminology or ontology or may be provided by text. Comments Value Set Name: VaccineTargetDisease Binding https://www.ctc.min-saude.pt/catalogos/vacinas (required) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD
valueCodeableConcept			CodeableConcept PT Core	Data type CodeableConcept PT Core
resource	Σ I	0..0	Resource	There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.part:vaccineDiseases.resource Short description If parameter is a whole resource Definition If the parameter is a whole resource. Comments When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods. Data type Resource Mappings rim: Entity. Role, or Act
part	Σ	0..0	see (parameter)	There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.part:vaccineDiseases.part Short description Named part of a multi-part parameter Definition A named part of a multi-part parameter. Comments Only one level of nested parameters is allowed.
vaccineWarnings	Σ	0..*	see (parameter)	There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.part:vaccineWarnings Short description Named part of a multi-part parameter Definition Identifica uma parte de um parâmetro com várias partes. Comments Only one level of nested parameters is allowed.
id		0..1	id	Element id Parameters.parameter:vaccineInfo.part:vaccineWarnings.id Short description Unique id for inter-element referencing Definition Identificador da mensagem de alerta Data type id Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.part:vaccineWarnings.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.part:vaccineWarnings.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
name	Σ	1..1	stringFixed Value	Element id Parameters.parameter:vaccineInfo.part:vaccineWarnings.name Short description Name from the definition Definition The name of the parameter (reference to the operation definition). Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Fixed value AvisosVacina Mappings rim: n/a
value[x]	Σ I	0..1		There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.part:vaccineWarnings.value[x] Short description If parameter is a data type Definition Conveys the content if the parameter is a data type. Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a
valueString			string	Data type string
resource	Σ I	0..0	Resource	There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.part:vaccineWarnings.resource Short description If parameter is a whole resource Definition If the parameter is a whole resource. Comments When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods. Data type Resource Mappings rim: Entity. Role, or Act
part	Σ	0..0	see (parameter)	There are no (further) constraints on this element Element id Parameters.parameter:vaccineInfo.part:vaccineWarnings.part Short description Named part of a multi-part parameter Definition A named part of a multi-part parameter. Comments Only one level of nested parameters is allowed.
commercialNames	Σ I	0..*	BackboneElement	There are no (further) constraints on this element Element id Parameters.parameter:commercialNames Short description Operation Parameter Definition Identifica o parâmetro transmitido ou recebido durante a operação. Data type BackboneElement Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` inv-1: A parameter must have one and only one of (value, resource, part) `(part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists()))` Mappings rim: n/a
id		0..1	id	There are no (further) constraints on this element Element id Parameters.parameter:commercialNames.id Short description Unique id for inter-element referencing Definition ID único para o elemento num recurso (para referências internas). Pode ser qualquer valor de cadeia que não contenha espaços. Data type id Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Parameters.parameter:commercialNames.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id Parameters.parameter:commercialNames.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
name	Σ	1..1	stringFixed Value	Element id Parameters.parameter:commercialNames.name Short description Name from the definition Definition Nome do parâmetro (em texto) Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Fixed value NomeComercial Mappings rim: n/a
value[x]	Σ I	0..0		There are no (further) constraints on this element Element id Parameters.parameter:commercialNames.value[x] Short description If parameter is a data type Definition Indicação do tipo de dados do parameter Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a
resource	Σ I	0..0	Resource	There are no (further) constraints on this element Element id Parameters.parameter:commercialNames.resource Short description If parameter is a whole resource Definition Se o parâmetro corresponder ao recurso inteiro. Comments When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods. Data type Resource Mappings rim: Entity. Role, or Act
part	Σ	0..*	see (parameter)	Element id Parameters.parameter:commercialNames.part Short description Named part of a multi-part parameter Definition Identifica uma parte de um parâmetro com várias partes. Comments Only one level of nested parameters is allowed. Sliced: Unordered, Open, by name(Value)
medication	Σ	0..*	see (parameter)	There are no (further) constraints on this element Element id Parameters.parameter:commercialNames.part:medication Short description Named part of a multi-part parameter Definition Identifica uma parte de um parâmetro com várias partes. Comments Only one level of nested parameters is allowed.
id		0..1	id	There are no (further) constraints on this element Element id Parameters.parameter:commercialNames.part:medication.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type id Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Parameters.parameter:commercialNames.part:medication.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id Parameters.parameter:commercialNames.part:medication.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
name	Σ	1..1	stringFixed Value	Element id Parameters.parameter:commercialNames.part:medication.name Short description Name from the definition Definition The name of the parameter (reference to the operation definition). Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Fixed value Medicamento-NC Mappings rim: n/a
value[x]	Σ I	0..0		There are no (further) constraints on this element Element id Parameters.parameter:commercialNames.part:medication.value[x] Short description If parameter is a data type Definition Conveys the content if the parameter is a data type. Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a
resource	Σ I	0..1	Resource	There are no (further) constraints on this element Element id Parameters.parameter:commercialNames.part:medication.resource Short description If parameter is a whole resource Definition If the parameter is a whole resource. Comments When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods. Data type Resource Mappings rim: Entity. Role, or Act
part	Σ	0..0	see (parameter)	There are no (further) constraints on this element Element id Parameters.parameter:commercialNames.part:medication.part Short description Named part of a multi-part parameter Definition A named part of a multi-part parameter. Comments Only one level of nested parameters is allowed.
gender	Σ	0..*	see (parameter)	There are no (further) constraints on this element Element id Parameters.parameter:commercialNames.part:gender Short description Named part of a multi-part parameter Definition Identifica uma parte de um parâmetro com várias partes. Comments Only one level of nested parameters is allowed.
id		0..1	id	There are no (further) constraints on this element Element id Parameters.parameter:commercialNames.part:gender.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type id Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Parameters.parameter:commercialNames.part:gender.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id Parameters.parameter:commercialNames.part:gender.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
name	Σ	1..1	stringFixed Value	Element id Parameters.parameter:commercialNames.part:gender.name Short description Name from the definition Definition The name of the parameter (reference to the operation definition). Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Fixed value Genero-NC Mappings rim: n/a
value[x]	Σ I	0..1	Binding	Element id Parameters.parameter:commercialNames.part:gender.value[x] Short description male \| female \| other \| unknown Definition Sexo administrativo Binding AdministrativeGender (required) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a
valueCode			code	Data type code
resource	Σ I	0..0	Resource	There are no (further) constraints on this element Element id Parameters.parameter:commercialNames.part:gender.resource Short description If parameter is a whole resource Definition If the parameter is a whole resource. Comments When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods. Data type Resource Mappings rim: Entity. Role, or Act
part	Σ	0..0	see (parameter)	There are no (further) constraints on this element Element id Parameters.parameter:commercialNames.part:gender.part Short description Named part of a multi-part parameter Definition A named part of a multi-part parameter. Comments Only one level of nested parameters is allowed.
administeredForeign	Σ	0..*	see (parameter)	There are no (further) constraints on this element Element id Parameters.parameter:commercialNames.part:administeredForeign Short description Named part of a multi-part parameter Definition Identifica uma parte de um parâmetro com várias partes. Comments Only one level of nested parameters is allowed.
id		0..1	id	There are no (further) constraints on this element Element id Parameters.parameter:commercialNames.part:administeredForeign.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type id Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Parameters.parameter:commercialNames.part:administeredForeign.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id Parameters.parameter:commercialNames.part:administeredForeign.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
name	Σ	1..1	stringFixed Value	Element id Parameters.parameter:commercialNames.part:administeredForeign.name Short description Name from the definition Definition The name of the parameter (reference to the operation definition). Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Fixed value AdministracaoExterna-NC Mappings rim: n/a
value[x]	Σ I	0..1		There are no (further) constraints on this element Element id Parameters.parameter:commercialNames.part:administeredForeign.value[x] Short description If parameter is a data type Definition Conveys the content if the parameter is a data type. Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a
valueBoolean			boolean	Data type boolean
resource	Σ I	0..0	Resource	There are no (further) constraints on this element Element id Parameters.parameter:commercialNames.part:administeredForeign.resource Short description If parameter is a whole resource Definition If the parameter is a whole resource. Comments When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods. Data type Resource Mappings rim: Entity. Role, or Act
part	Σ	0..0	see (parameter)	There are no (further) constraints on this element Element id Parameters.parameter:commercialNames.part:administeredForeign.part Short description Named part of a multi-part parameter Definition A named part of a multi-part parameter. Comments Only one level of nested parameters is allowed.
certificate	Σ	0..*	see (parameter)	There are no (further) constraints on this element Element id Parameters.parameter:commercialNames.part:certificate Short description Named part of a multi-part parameter Definition Identifica uma parte de um parâmetro com várias partes. Comments Only one level of nested parameters is allowed.
id		0..1	id	There are no (further) constraints on this element Element id Parameters.parameter:commercialNames.part:certificate.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type id Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Parameters.parameter:commercialNames.part:certificate.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id Parameters.parameter:commercialNames.part:certificate.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
name	Σ	1..1	stringFixed Value	Element id Parameters.parameter:commercialNames.part:certificate.name Short description Name from the definition Definition The name of the parameter (reference to the operation definition). Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Fixed value ExistenciaCertificado-NC Mappings rim: n/a
value[x]	Σ I	0..1		There are no (further) constraints on this element Element id Parameters.parameter:commercialNames.part:certificate.value[x] Short description If parameter is a data type Definition Conveys the content if the parameter is a data type. Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a
valueBoolean			boolean	Data type boolean
resource	Σ I	0..0	Resource	There are no (further) constraints on this element Element id Parameters.parameter:commercialNames.part:certificate.resource Short description If parameter is a whole resource Definition If the parameter is a whole resource. Comments When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods. Data type Resource Mappings rim: Entity. Role, or Act
part	Σ	0..0	see (parameter)	There are no (further) constraints on this element Element id Parameters.parameter:commercialNames.part:certificate.part Short description Named part of a multi-part parameter Definition A named part of a multi-part parameter. Comments Only one level of nested parameters is allowed.
active	Σ	0..*	see (parameter)	There are no (further) constraints on this element Element id Parameters.parameter:commercialNames.part:active Short description Named part of a multi-part parameter Definition Identifica uma parte de um parâmetro com várias partes. Comments Only one level of nested parameters is allowed.
id		0..1	id	There are no (further) constraints on this element Element id Parameters.parameter:commercialNames.part:active.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type id Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Parameters.parameter:commercialNames.part:active.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id Parameters.parameter:commercialNames.part:active.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
name	Σ	1..1	stringFixed Value	Element id Parameters.parameter:commercialNames.part:active.name Short description Name from the definition Definition The name of the parameter (reference to the operation definition). Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Fixed value InformacaoAtiva-NC Mappings rim: n/a
value[x]	Σ I	0..1		There are no (further) constraints on this element Element id Parameters.parameter:commercialNames.part:active.value[x] Short description If parameter is a data type Definition Conveys the content if the parameter is a data type. Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a
valueBoolean			boolean	Data type boolean
resource	Σ I	0..0	Resource	There are no (further) constraints on this element Element id Parameters.parameter:commercialNames.part:active.resource Short description If parameter is a whole resource Definition If the parameter is a whole resource. Comments When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods. Data type Resource Mappings rim: Entity. Role, or Act
part	Σ	0..0	see (parameter)	There are no (further) constraints on this element Element id Parameters.parameter:commercialNames.part:active.part Short description Named part of a multi-part parameter Definition A named part of a multi-part parameter. Comments Only one level of nested parameters is allowed.
lot	Σ	0..*	see (parameter)	There are no (further) constraints on this element Element id Parameters.parameter:commercialNames.part:lot Short description Named part of a multi-part parameter Definition Identifica uma parte de um parâmetro com várias partes. Comments Only one level of nested parameters is allowed.
id		0..1	id	There are no (further) constraints on this element Element id Parameters.parameter:commercialNames.part:lot.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type id Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Parameters.parameter:commercialNames.part:lot.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id Parameters.parameter:commercialNames.part:lot.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
name	Σ	1..1	stringFixed Value	Element id Parameters.parameter:commercialNames.part:lot.name Short description Name from the definition Definition The name of the parameter (reference to the operation definition). Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Fixed value Lote-NC Mappings rim: n/a
value[x]	Σ I	0..0		There are no (further) constraints on this element Element id Parameters.parameter:commercialNames.part:lot.value[x] Short description If parameter is a data type Definition Conveys the content if the parameter is a data type. Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a
resource	Σ I	0..0	Resource	There are no (further) constraints on this element Element id Parameters.parameter:commercialNames.part:lot.resource Short description If parameter is a whole resource Definition If the parameter is a whole resource. Comments When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods. Data type Resource Mappings rim: Entity. Role, or Act
part	Σ	0..*	see (parameter)	Element id Parameters.parameter:commercialNames.part:lot.part Short description Named part of a multi-part parameter Definition A named part of a multi-part parameter. Comments Only one level of nested parameters is allowed. Sliced: Unordered, Open, by name(Value)
number	Σ	0..*	see (parameter)	There are no (further) constraints on this element Element id Parameters.parameter:commercialNames.part:lot.part:number Short description Named part of a multi-part parameter Definition A named part of a multi-part parameter. Comments Only one level of nested parameters is allowed.
id		0..1	id	There are no (further) constraints on this element Element id Parameters.parameter:commercialNames.part:lot.part:number.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type id Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Parameters.parameter:commercialNames.part:lot.part:number.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id Parameters.parameter:commercialNames.part:lot.part:number.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
name	Σ	1..1	stringFixed Value	Element id Parameters.parameter:commercialNames.part:lot.part:number.name Short description Name from the definition Definition The name of the parameter (reference to the operation definition). Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Fixed value NumeroLote Mappings rim: n/a
value[x]	Σ I	0..1		There are no (further) constraints on this element Element id Parameters.parameter:commercialNames.part:lot.part:number.value[x] Short description If parameter is a data type Definition Conveys the content if the parameter is a data type. Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a
valueString			string	Data type string
resource	Σ I	0..0	Resource	There are no (further) constraints on this element Element id Parameters.parameter:commercialNames.part:lot.part:number.resource Short description If parameter is a whole resource Definition If the parameter is a whole resource. Comments When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods. Data type Resource Mappings rim: Entity. Role, or Act
part	Σ	0..0	see (parameter)	There are no (further) constraints on this element Element id Parameters.parameter:commercialNames.part:lot.part:number.part Short description Named part of a multi-part parameter Definition A named part of a multi-part parameter. Comments Only one level of nested parameters is allowed.
endDate	Σ	0..*	see (parameter)	There are no (further) constraints on this element Element id Parameters.parameter:commercialNames.part:lot.part:endDate Short description Named part of a multi-part parameter Definition A named part of a multi-part parameter. Comments Only one level of nested parameters is allowed.
id		0..1	id	There are no (further) constraints on this element Element id Parameters.parameter:commercialNames.part:lot.part:endDate.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type id Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Parameters.parameter:commercialNames.part:lot.part:endDate.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id Parameters.parameter:commercialNames.part:lot.part:endDate.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
name	Σ	1..1	stringFixed Value	Element id Parameters.parameter:commercialNames.part:lot.part:endDate.name Short description Name from the definition Definition The name of the parameter (reference to the operation definition). Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Fixed value DataValidade Mappings rim: n/a
value[x]	Σ I	0..1		There are no (further) constraints on this element Element id Parameters.parameter:commercialNames.part:lot.part:endDate.value[x] Short description If parameter is a data type Definition Conveys the content if the parameter is a data type. Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a
valueDate			date	Data type date
resource	Σ I	0..0	Resource	There are no (further) constraints on this element Element id Parameters.parameter:commercialNames.part:lot.part:endDate.resource Short description If parameter is a whole resource Definition If the parameter is a whole resource. Comments When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods. Data type Resource Mappings rim: Entity. Role, or Act
part	Σ	0..0	see (parameter)	There are no (further) constraints on this element Element id Parameters.parameter:commercialNames.part:lot.part:endDate.part Short description Named part of a multi-part parameter Definition A named part of a multi-part parameter. Comments Only one level of nested parameters is allowed.
dosage	Σ	0..*	see (parameter)	There are no (further) constraints on this element Element id Parameters.parameter:commercialNames.part:dosage Short description Named part of a multi-part parameter Definition Identifica uma parte de um parâmetro com várias partes. Comments Only one level of nested parameters is allowed.
id		0..1	id	There are no (further) constraints on this element Element id Parameters.parameter:commercialNames.part:dosage.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type id Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Parameters.parameter:commercialNames.part:dosage.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id Parameters.parameter:commercialNames.part:dosage.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
name	Σ	1..1	stringFixed Value	Element id Parameters.parameter:commercialNames.part:dosage.name Short description Name from the definition Definition The name of the parameter (reference to the operation definition). Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Fixed value Dosagem Mappings rim: n/a
value[x]	Σ I	0..1		Element id Parameters.parameter:commercialNames.part:dosage.value[x] Short description A measured or measurable amount Definition A measured amount (or an amount that can potentially be measured). Note that measured amounts include amounts that are not precisely quantified, including amounts involving arbitrary units and floating currencies. Comments The context of use may frequently define what kind of quantity this is and therefore what kind of units can be used. The context of use may also restrict the values for the comparator. Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` qty-3: If a code for the unit is present, the system SHALL also be present `code.empty() or system.exists()` Mappings rim: n/a v2: SN (see also Range) or CQ rim: PQ, IVL<PQ>, MO, CO, depending on the values
valueQuantity			Quantity PT Core	Data type Quantity PT Core
id		0..1	id	There are no (further) constraints on this element Element id Parameters.parameter:commercialNames.part:dosage.value[x].id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type id Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Parameters.parameter:commercialNames.part:dosage.value[x].extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
value	Σ	0..1	decimal	There are no (further) constraints on this element Element id Parameters.parameter:commercialNames.part:dosage.value[x].value Short description Numerical value (with implicit precision) Definition The value of the measured amount. The value includes an implicit precision in the presentation of the value. Requirements Precision is handled implicitly in almost all cases of measurement. Comments The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books). Data type decimal Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: SN.2 / CQ - N/A rim: PQ.value, CO.value, MO.value, IVL.high or IVL.low depending on the value
comparator	Σ ?!	0..0	codeBinding	There are no (further) constraints on this element Element id Parameters.parameter:commercialNames.part:dosage.value[x].comparator Short description < \| <= \| >= \| > - how to understand the value Definition How the value should be understood and represented - whether the actual value is greater or less than the stated value due to measurement issues; e.g. if the comparator is "<" , then the real value is < stated value. Requirements Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Meaning when missing If there is no comparator, then there is no modification of the value Data type code Binding QuantityComparator (required) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: SN.1 / CQ.1 rim: IVL properties
unit	Σ	0..1	stringBinding	There are no (further) constraints on this element Element id Parameters.parameter:commercialNames.part:dosage.value[x].unit Short description Unit representation Definition A human-readable form of the unit. Requirements There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms. Comments Value Set Name: Unit Data type string Binding https://www.ctc.min-saude.pt/catalogos/apoio-ao-registo-clinico (required) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: (see OBX.6 etc.) / CQ.2 rim: PQ.unit
system	Σ I	0..1	uriBinding	There are no (further) constraints on this element Element id Parameters.parameter:commercialNames.part:dosage.value[x].system Short description System that defines coded unit form Definition The identification of the system that provides the coded form of the unit. Requirements Need to know the system that defines the coded form of the unit. Comments Value Set Name: Unit Data type uri Binding https://www.ctc.min-saude.pt/catalogos/apoio-ao-registo-clinico (required) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: (see OBX.6 etc.) / CQ.2 rim: CO.codeSystem, PQ.translation.codeSystem
code	Σ	0..1	code	There are no (further) constraints on this element Element id Parameters.parameter:commercialNames.part:dosage.value[x].code Short description Coded form of the unit Definition A computer processable form of the unit in some unit representation system. Requirements Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest. Comments The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system. Data type code Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: (see OBX.6 etc.) / CQ.2 rim: PQ.code, MO.currency, PQ.translation.code
resource	Σ I	0..0	Resource	There are no (further) constraints on this element Element id Parameters.parameter:commercialNames.part:dosage.resource Short description If parameter is a whole resource Definition If the parameter is a whole resource. Comments When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods. Data type Resource Mappings rim: Entity. Role, or Act
part	Σ	0..0	see (parameter)	There are no (further) constraints on this element Element id Parameters.parameter:commercialNames.part:dosage.part Short description Named part of a multi-part parameter Definition A named part of a multi-part parameter. Comments Only one level of nested parameters is allowed.
anatomicLocation	Σ I	0..*	BackboneElement	There are no (further) constraints on this element Element id Parameters.parameter:anatomicLocation Short description Operation Parameter Definition Identifica o parâmetro transmitido ou recebido durante a operação. Data type BackboneElement Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` inv-1: A parameter must have one and only one of (value, resource, part) `(part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists()))` Mappings rim: n/a
id		0..1	id	There are no (further) constraints on this element Element id Parameters.parameter:anatomicLocation.id Short description Unique id for inter-element referencing Definition ID único para o elemento num recurso (para referências internas). Pode ser qualquer valor de cadeia que não contenha espaços. Data type id Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Parameters.parameter:anatomicLocation.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id Parameters.parameter:anatomicLocation.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
name	Σ	1..1	stringFixed Value	Element id Parameters.parameter:anatomicLocation.name Short description Name from the definition Definition Nome do parâmetro (em texto) Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Fixed value LocalizacaoAnatomica Mappings rim: n/a
value[x]	Σ I	0..0		Element id Parameters.parameter:anatomicLocation.value[x] Short description Concept - reference to a terminology or just text Definition A concept that may be defined by a formal reference to a terminology or ontology or may be provided by text. Comments Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination. Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD
resource	Σ I	0..0	Resource	There are no (further) constraints on this element Element id Parameters.parameter:anatomicLocation.resource Short description If parameter is a whole resource Definition Se o parâmetro corresponder ao recurso inteiro. Comments When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods. Data type Resource Mappings rim: Entity. Role, or Act
part	Σ	0..*	see (parameter)	Element id Parameters.parameter:anatomicLocation.part Short description Named part of a multi-part parameter Definition Identifica uma parte de um parâmetro com várias partes. Comments Only one level of nested parameters is allowed. Sliced: Unordered, Open, by name(Value)
side	Σ	0..*	see (parameter)	There are no (further) constraints on this element Element id Parameters.parameter:anatomicLocation.part:side Short description Named part of a multi-part parameter Definition Identifica uma parte de um parâmetro com várias partes. Comments Only one level of nested parameters is allowed.
id		0..1	id	There are no (further) constraints on this element Element id Parameters.parameter:anatomicLocation.part:side.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type id Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Parameters.parameter:anatomicLocation.part:side.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id Parameters.parameter:anatomicLocation.part:side.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
name	Σ	1..1	stringFixed Value	Element id Parameters.parameter:anatomicLocation.part:side.name Short description Name from the definition Definition The name of the parameter (reference to the operation definition). Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Fixed value Localizacao Mappings rim: n/a
value[x]	Σ I	0..1	Binding	Element id Parameters.parameter:anatomicLocation.part:side.value[x] Short description Concept - reference to a terminology or just text Definition A concept that may be defined by a formal reference to a terminology or ontology or may be provided by text. Comments Value Set Name: AnatomicalSctruture Binding https://www.ctc.min-saude.pt/catalogos/apoio-ao-registo-clinico (required) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD
valueCodeableConcept			CodeableConcept PT Core	Data type CodeableConcept PT Core
resource	Σ I	0..0	Resource	There are no (further) constraints on this element Element id Parameters.parameter:anatomicLocation.part:side.resource Short description If parameter is a whole resource Definition If the parameter is a whole resource. Comments When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods. Data type Resource Mappings rim: Entity. Role, or Act
part	Σ	0..0	see (parameter)	There are no (further) constraints on this element Element id Parameters.parameter:anatomicLocation.part:side.part Short description Named part of a multi-part parameter Definition A named part of a multi-part parameter. Comments Only one level of nested parameters is allowed.
laterality	Σ	0..*	see (parameter)	There are no (further) constraints on this element Element id Parameters.parameter:anatomicLocation.part:laterality Short description Named part of a multi-part parameter Definition Identifica uma parte de um parâmetro com várias partes. Comments Only one level of nested parameters is allowed.
id		0..1	id	There are no (further) constraints on this element Element id Parameters.parameter:anatomicLocation.part:laterality.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type id Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Parameters.parameter:anatomicLocation.part:laterality.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id Parameters.parameter:anatomicLocation.part:laterality.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
name	Σ	1..1	stringFixed Value	Element id Parameters.parameter:anatomicLocation.part:laterality.name Short description Name from the definition Definition The name of the parameter (reference to the operation definition). Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Fixed value Lateralidade Mappings rim: n/a
value[x]	Σ I	0..1	Binding	Element id Parameters.parameter:anatomicLocation.part:laterality.value[x] Short description Concept - reference to a terminology or just text Definition A concept that may be defined by a formal reference to a terminology or ontology or may be provided by text. Comments Value Set Name: Laterality Binding https://www.ctc.min-saude.pt/catalogos/apoio-ao-registo-clinico (required) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD
valueCodeableConcept			CodeableConcept PT Core	Data type CodeableConcept PT Core
resource	Σ I	0..0	Resource	There are no (further) constraints on this element Element id Parameters.parameter:anatomicLocation.part:laterality.resource Short description If parameter is a whole resource Definition If the parameter is a whole resource. Comments When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods. Data type Resource Mappings rim: Entity. Role, or Act
part	Σ	0..0	see (parameter)	There are no (further) constraints on this element Element id Parameters.parameter:anatomicLocation.part:laterality.part Short description Named part of a multi-part parameter Definition A named part of a multi-part parameter. Comments Only one level of nested parameters is allowed.
hasLaterality	Σ	0..*	see (parameter)	There are no (further) constraints on this element Element id Parameters.parameter:anatomicLocation.part:hasLaterality Short description Named part of a multi-part parameter Definition Identifica uma parte de um parâmetro com várias partes. Comments Only one level of nested parameters is allowed.
id		0..1	id	There are no (further) constraints on this element Element id Parameters.parameter:anatomicLocation.part:hasLaterality.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type id Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Parameters.parameter:anatomicLocation.part:hasLaterality.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id Parameters.parameter:anatomicLocation.part:hasLaterality.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
name	Σ	1..1	stringFixed Value	Element id Parameters.parameter:anatomicLocation.part:hasLaterality.name Short description Name from the definition Definition The name of the parameter (reference to the operation definition). Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Fixed value ExistenciaLateralidade Mappings rim: n/a
value[x]	Σ I	0..1		There are no (further) constraints on this element Element id Parameters.parameter:anatomicLocation.part:hasLaterality.value[x] Short description If parameter is a data type Definition Conveys the content if the parameter is a data type. Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a
valueBoolean			boolean	Data type boolean
resource	Σ I	0..0	Resource	There are no (further) constraints on this element Element id Parameters.parameter:anatomicLocation.part:hasLaterality.resource Short description If parameter is a whole resource Definition If the parameter is a whole resource. Comments When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods. Data type Resource Mappings rim: Entity. Role, or Act
part	Σ	0..0	see (parameter)	There are no (further) constraints on this element Element id Parameters.parameter:anatomicLocation.part:hasLaterality.part Short description Named part of a multi-part parameter Definition A named part of a multi-part parameter. Comments Only one level of nested parameters is allowed.
routeAdministration	Σ I	0..*	BackboneElement	There are no (further) constraints on this element Element id Parameters.parameter:routeAdministration Short description Operation Parameter Definition Identifica o parâmetro transmitido ou recebido durante a operação. Data type BackboneElement Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` inv-1: A parameter must have one and only one of (value, resource, part) `(part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists()))` Mappings rim: n/a
id		0..1	id	There are no (further) constraints on this element Element id Parameters.parameter:routeAdministration.id Short description Unique id for inter-element referencing Definition ID único para o elemento num recurso (para referências internas). Pode ser qualquer valor de cadeia que não contenha espaços. Data type id Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Parameters.parameter:routeAdministration.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id Parameters.parameter:routeAdministration.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
name	Σ	1..1	stringFixed Value	Element id Parameters.parameter:routeAdministration.name Short description Name from the definition Definition Nome do parâmetro (em texto) Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Fixed value ViaAdministracao Mappings rim: n/a
value[x]	Σ I	0..1	Binding	Element id Parameters.parameter:routeAdministration.value[x] Short description Concept - reference to a terminology or just text Definition A concept that may be defined by a formal reference to a terminology or ontology or may be provided by text. Comments Value Set Name: RouteOfAdministration Binding https://www.ctc.min-saude.pt/catalogos/apoio-ao-registo-da-medicacao (required) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD
valueCodeableConcept			CodeableConcept PT Core	Data type CodeableConcept PT Core
resource	Σ I	0..0	Resource	There are no (further) constraints on this element Element id Parameters.parameter:routeAdministration.resource Short description If parameter is a whole resource Definition Se o parâmetro corresponder ao recurso inteiro. Comments When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods. Data type Resource Mappings rim: Entity. Role, or Act
part	Σ	0..0	see (parameter)	There are no (further) constraints on this element Element id Parameters.parameter:routeAdministration.part Short description Named part of a multi-part parameter Definition Identifica uma parte de um parâmetro com várias partes. Comments Only one level of nested parameters is allowed.
lotOrigin	Σ I	0..*	BackboneElement	There are no (further) constraints on this element Element id Parameters.parameter:lotOrigin Short description Operation Parameter Definition Identifica o parâmetro transmitido ou recebido durante a operação. Data type BackboneElement Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` inv-1: A parameter must have one and only one of (value, resource, part) `(part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists()))` Mappings rim: n/a
id		0..1	id	There are no (further) constraints on this element Element id Parameters.parameter:lotOrigin.id Short description Unique id for inter-element referencing Definition ID único para o elemento num recurso (para referências internas). Pode ser qualquer valor de cadeia que não contenha espaços. Data type id Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Parameters.parameter:lotOrigin.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id Parameters.parameter:lotOrigin.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
name	Σ	1..1	stringFixed Value	Element id Parameters.parameter:lotOrigin.name Short description Name from the definition Definition Nome do parâmetro (em texto) Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Fixed value LoteOrigem Mappings rim: n/a
value[x]	Σ I	0..1		Element id Parameters.parameter:lotOrigin.value[x] Short description Concept - reference to a terminology or just text Definition A concept that may be defined by a formal reference to a terminology or ontology or may be provided by text. Comments Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination. Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD
valueCodeableConcept			CodeableConcept INT PT Core	Data type CodeableConcept INT PT Core
id		0..1	id	There are no (further) constraints on this element Element id Parameters.parameter:lotOrigin.value[x].id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type id Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Parameters.parameter:lotOrigin.value[x].extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
coding	Σ	0..*	Coding	There are no (further) constraints on this element Element id Parameters.parameter:lotOrigin.value[x].coding Short description Code defined by a terminology system Definition A reference to a code defined by a terminology system. Requirements Allows for alternative encodings within a code system, and translations to other code systems. Comments Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. Data type Coding Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim: CV orim: fhir:Coding rdfs:subClassOf dt:CDCoding v2: CE.1-8, CE.10-22 rim: union(., ./translation) orim: fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
id		0..1	id	There are no (further) constraints on this element Element id Parameters.parameter:lotOrigin.value[x].coding.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type id Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Parameters.parameter:lotOrigin.value[x].coding.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
system	Σ	1..1	uriFixed Value	Element id Parameters.parameter:lotOrigin.value[x].coding.system Short description Identity of the terminology system Definition The identification of the code system that defines the meaning of the symbol in the code. Requirements Need to be unambiguous about the source of the definition of the symbol. Comments The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously. Data type uri Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Fixed value https://spms.min-saude.pt/vacinas/CodeSystem/lotOrigin Mappings rim: n/a v2: CE.3 rim:* ./codeSystem orim: fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem
version	Σ	0..1	string	There are no (further) constraints on this element Element id Parameters.parameter:lotOrigin.value[x].coding.version Short description Version of the system - if relevant Definition The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged. Comments Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date. Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE.7 rim:* ./codeSystemVersion orim: fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion
code	Σ	1..1	code	There are no (further) constraints on this element Element id Parameters.parameter:lotOrigin.value[x].coding.code Short description Symbol in syntax defined by the system Definition A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination). Requirements Need to refer to a particular code in the system. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type code Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE.1 rim:* ./code orim: fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code
display	Σ	0..1	string	There are no (further) constraints on this element Element id Parameters.parameter:lotOrigin.value[x].coding.display Short description Representation defined by the system Definition A representation of the meaning of the code in the system, following the rules of the system. Requirements Need to be able to carry a human-readable meaning of the code for readers that do not know the system. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE.2 - but note this is not well followed rim:* CV.displayName orim: fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName
userSelected	Σ	0..1	boolean	There are no (further) constraints on this element Element id Parameters.parameter:lotOrigin.value[x].coding.userSelected Short description If this coding was chosen directly by the user Definition Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays). Requirements This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing. Comments Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely. Data type boolean Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: Sometimes implied by being first rim: CD.codingRationale orim: fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]
text	Σ	1..1	string	There are no (further) constraints on this element Element id Parameters.parameter:lotOrigin.value[x].text Short description Plain text representation of the concept Definition A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user. Requirements The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source. Comments Very often the text is the same as a displayName of one of the codings. Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE.9. But note many systems use CE.2 for this rim: ./originalText[mediaType/code="text/plain"]/data orim: fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText
resource	Σ I	0..0	Resource	There are no (further) constraints on this element Element id Parameters.parameter:lotOrigin.resource Short description If parameter is a whole resource Definition Se o parâmetro corresponder ao recurso inteiro. Comments When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods. Data type Resource Mappings rim: Entity. Role, or Act
part	Σ	0..0	see (parameter)	There are no (further) constraints on this element Element id Parameters.parameter:lotOrigin.part Short description Named part of a multi-part parameter Definition Identifica uma parte de um parâmetro com várias partes. Comments Only one level of nested parameters is allowed.
laterality	Σ I	0..*	BackboneElement	There are no (further) constraints on this element Element id Parameters.parameter:laterality Short description Operation Parameter Definition Identifica o parâmetro transmitido ou recebido durante a operação. Data type BackboneElement Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` inv-1: A parameter must have one and only one of (value, resource, part) `(part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists()))` Mappings rim: n/a
id		0..1	id	There are no (further) constraints on this element Element id Parameters.parameter:laterality.id Short description Unique id for inter-element referencing Definition ID único para o elemento num recurso (para referências internas). Pode ser qualquer valor de cadeia que não contenha espaços. Data type id Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Parameters.parameter:laterality.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id Parameters.parameter:laterality.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
name	Σ	1..1	stringFixed Value	Element id Parameters.parameter:laterality.name Short description Name from the definition Definition Nome do parâmetro (em texto) Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Fixed value Lateralidade Mappings rim: n/a
value[x]	Σ I	0..1	Binding	Element id Parameters.parameter:laterality.value[x] Short description Concept - reference to a terminology or just text Definition A concept that may be defined by a formal reference to a terminology or ontology or may be provided by text. Comments Value Set Name: Laterality Binding https://www.ctc.min-saude.pt/catalogos/apoio-ao-registo-clinico (required) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD
valueCodeableConcept			CodeableConcept PT Core	Data type CodeableConcept PT Core
resource	Σ I	0..0	Resource	There are no (further) constraints on this element Element id Parameters.parameter:laterality.resource Short description If parameter is a whole resource Definition Se o parâmetro corresponder ao recurso inteiro. Comments When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods. Data type Resource Mappings rim: Entity. Role, or Act
part	Σ	0..0	see (parameter)	There are no (further) constraints on this element Element id Parameters.parameter:laterality.part Short description Named part of a multi-part parameter Definition Identifica uma parte de um parâmetro com várias partes. Comments Only one level of nested parameters is allowed.
locationAdms	Σ I	0..*	BackboneElement	There are no (further) constraints on this element Element id Parameters.parameter:locationAdms Short description Operation Parameter Definition Identifica o parâmetro transmitido ou recebido durante a operação. Data type BackboneElement Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` inv-1: A parameter must have one and only one of (value, resource, part) `(part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists()))` Mappings rim: n/a
id		0..1	id	There are no (further) constraints on this element Element id Parameters.parameter:locationAdms.id Short description Unique id for inter-element referencing Definition ID único para o elemento num recurso (para referências internas). Pode ser qualquer valor de cadeia que não contenha espaços. Data type id Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Parameters.parameter:locationAdms.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id Parameters.parameter:locationAdms.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
name	Σ	1..1	stringFixed Value	Element id Parameters.parameter:locationAdms.name Short description Name from the definition Definition Nome do parâmetro (em texto) Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Fixed value TipologiasLocalAdministracao Mappings rim: n/a
value[x]	Σ I	0..1	Binding	Element id Parameters.parameter:locationAdms.value[x] Short description Concept - reference to a terminology or just text Definition A concept that may be defined by a formal reference to a terminology or ontology or may be provided by text. Comments Value Set Name: VaccineLocationType Binding https://www.ctc.min-saude.pt/catalogos/apoio-ao-registo-administrativo (required) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD
valueCodeableConcept			CodeableConcept PT Core	Data type CodeableConcept PT Core
resource	Σ I	0..0	Resource	There are no (further) constraints on this element Element id Parameters.parameter:locationAdms.resource Short description If parameter is a whole resource Definition Se o parâmetro corresponder ao recurso inteiro. Comments When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods. Data type Resource Mappings rim: Entity. Role, or Act
part	Σ	0..0	see (parameter)	There are no (further) constraints on this element Element id Parameters.parameter:locationAdms.part Short description Named part of a multi-part parameter Definition Identifica uma parte de um parâmetro com várias partes. Comments Only one level of nested parameters is allowed.
vaccinationPatientType	Σ I	0..*	BackboneElement	There are no (further) constraints on this element Element id Parameters.parameter:vaccinationPatientType Short description Operation Parameter Definition Identifica o parâmetro transmitido ou recebido durante a operação. Data type BackboneElement Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` inv-1: A parameter must have one and only one of (value, resource, part) `(part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists()))` Mappings rim: n/a
id		0..1	id	There are no (further) constraints on this element Element id Parameters.parameter:vaccinationPatientType.id Short description Unique id for inter-element referencing Definition ID único para o elemento num recurso (para referências internas). Pode ser qualquer valor de cadeia que não contenha espaços. Data type id Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Parameters.parameter:vaccinationPatientType.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id Parameters.parameter:vaccinationPatientType.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
name	Σ	1..1	stringFixed Value	Element id Parameters.parameter:vaccinationPatientType.name Short description Name from the definition Definition Nome do parâmetro (em texto) Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Fixed value TipoUtenteVacinas Mappings rim: n/a
value[x]	Σ I	0..0		There are no (further) constraints on this element Element id Parameters.parameter:vaccinationPatientType.value[x] Short description If parameter is a data type Definition Indicação do tipo de dados do parameter Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a
resource	Σ I	0..0	Resource	There are no (further) constraints on this element Element id Parameters.parameter:vaccinationPatientType.resource Short description If parameter is a whole resource Definition Se o parâmetro corresponder ao recurso inteiro. Comments When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods. Data type Resource Mappings rim: Entity. Role, or Act
part	Σ	0..*	see (parameter)	Element id Parameters.parameter:vaccinationPatientType.part Short description Named part of a multi-part parameter Definition Identifica uma parte de um parâmetro com várias partes. Comments Only one level of nested parameters is allowed. Sliced: Unordered, Open, by name(Value)
codeVaccinationPatientType	Σ	0..*	see (parameter)	There are no (further) constraints on this element Element id Parameters.parameter:vaccinationPatientType.part:codeVaccinationPatientType Short description Named part of a multi-part parameter Definition Identifica uma parte de um parâmetro com várias partes. Comments Only one level of nested parameters is allowed.
id		0..1	id	There are no (further) constraints on this element Element id Parameters.parameter:vaccinationPatientType.part:codeVaccinationPatientType.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type id Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Parameters.parameter:vaccinationPatientType.part:codeVaccinationPatientType.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id Parameters.parameter:vaccinationPatientType.part:codeVaccinationPatientType.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
name	Σ	1..1	stringFixed Value	Element id Parameters.parameter:vaccinationPatientType.part:codeVaccinationPatientType.name Short description Name from the definition Definition The name of the parameter (reference to the operation definition). Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Fixed value IdentificadorTipoUtenteVacinas Mappings rim: n/a
value[x]	Σ I	0..1		Element id Parameters.parameter:vaccinationPatientType.part:codeVaccinationPatientType.value[x] Short description Concept - reference to a terminology or just text Definition A concept that may be defined by a formal reference to a terminology or ontology or may be provided by text. Comments Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination. Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD
valueCodeableConcept			CodeableConcept INT PT Core	Data type CodeableConcept INT PT Core
id		0..1	id	There are no (further) constraints on this element Element id Parameters.parameter:vaccinationPatientType.part:codeVaccinationPatientType.value[x].id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type id Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Parameters.parameter:vaccinationPatientType.part:codeVaccinationPatientType.value[x].extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
coding	Σ	0..*	Coding	There are no (further) constraints on this element Element id Parameters.parameter:vaccinationPatientType.part:codeVaccinationPatientType.value[x].coding Short description Code defined by a terminology system Definition A reference to a code defined by a terminology system. Requirements Allows for alternative encodings within a code system, and translations to other code systems. Comments Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. Data type Coding Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim: CV orim: fhir:Coding rdfs:subClassOf dt:CDCoding v2: CE.1-8, CE.10-22 rim: union(., ./translation) orim: fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
id		0..1	id	There are no (further) constraints on this element Element id Parameters.parameter:vaccinationPatientType.part:codeVaccinationPatientType.value[x].coding.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type id Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Parameters.parameter:vaccinationPatientType.part:codeVaccinationPatientType.value[x].coding.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
system	Σ	1..1	uriFixed Value	Element id Parameters.parameter:vaccinationPatientType.part:codeVaccinationPatientType.value[x].coding.system Short description Identity of the terminology system Definition The identification of the code system that defines the meaning of the symbol in the code. Requirements Need to be unambiguous about the source of the definition of the symbol. Comments The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously. Data type uri Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Fixed value https://spms.min-saude.pt/vacinas/CodeSystem/vaccinationPatientType Mappings rim: n/a v2: CE.3 rim:* ./codeSystem orim: fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem
version	Σ	0..1	string	There are no (further) constraints on this element Element id Parameters.parameter:vaccinationPatientType.part:codeVaccinationPatientType.value[x].coding.version Short description Version of the system - if relevant Definition The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged. Comments Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date. Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE.7 rim:* ./codeSystemVersion orim: fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion
code	Σ	1..1	code	There are no (further) constraints on this element Element id Parameters.parameter:vaccinationPatientType.part:codeVaccinationPatientType.value[x].coding.code Short description Symbol in syntax defined by the system Definition A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination). Requirements Need to refer to a particular code in the system. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type code Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE.1 rim:* ./code orim: fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code
display	Σ	0..1	string	There are no (further) constraints on this element Element id Parameters.parameter:vaccinationPatientType.part:codeVaccinationPatientType.value[x].coding.display Short description Representation defined by the system Definition A representation of the meaning of the code in the system, following the rules of the system. Requirements Need to be able to carry a human-readable meaning of the code for readers that do not know the system. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE.2 - but note this is not well followed rim:* CV.displayName orim: fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName
userSelected	Σ	0..1	boolean	There are no (further) constraints on this element Element id Parameters.parameter:vaccinationPatientType.part:codeVaccinationPatientType.value[x].coding.userSelected Short description If this coding was chosen directly by the user Definition Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays). Requirements This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing. Comments Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely. Data type boolean Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: Sometimes implied by being first rim: CD.codingRationale orim: fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]
text	Σ	1..1	string	There are no (further) constraints on this element Element id Parameters.parameter:vaccinationPatientType.part:codeVaccinationPatientType.value[x].text Short description Plain text representation of the concept Definition A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user. Requirements The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source. Comments Very often the text is the same as a displayName of one of the codings. Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE.9. But note many systems use CE.2 for this rim: ./originalText[mediaType/code="text/plain"]/data orim: fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText
resource	Σ I	0..0	Resource	There are no (further) constraints on this element Element id Parameters.parameter:vaccinationPatientType.part:codeVaccinationPatientType.resource Short description If parameter is a whole resource Definition If the parameter is a whole resource. Comments When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods. Data type Resource Mappings rim: Entity. Role, or Act
part	Σ	0..0	see (parameter)	There are no (further) constraints on this element Element id Parameters.parameter:vaccinationPatientType.part:codeVaccinationPatientType.part Short description Named part of a multi-part parameter Definition A named part of a multi-part parameter. Comments Only one level of nested parameters is allowed.
statusVaccinationPatientType	Σ	0..*	see (parameter)	There are no (further) constraints on this element Element id Parameters.parameter:vaccinationPatientType.part:statusVaccinationPatientType Short description Named part of a multi-part parameter Definition Identifica uma parte de um parâmetro com várias partes. Comments Only one level of nested parameters is allowed.
id		0..1	id	There are no (further) constraints on this element Element id Parameters.parameter:vaccinationPatientType.part:statusVaccinationPatientType.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type id Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Parameters.parameter:vaccinationPatientType.part:statusVaccinationPatientType.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id Parameters.parameter:vaccinationPatientType.part:statusVaccinationPatientType.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
name	Σ	1..1	stringFixed Value	Element id Parameters.parameter:vaccinationPatientType.part:statusVaccinationPatientType.name Short description Name from the definition Definition The name of the parameter (reference to the operation definition). Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Fixed value EstadoTipoUtenteVacinas Mappings rim: n/a
value[x]	Σ I	0..1		There are no (further) constraints on this element Element id Parameters.parameter:vaccinationPatientType.part:statusVaccinationPatientType.value[x] Short description If parameter is a data type Definition Conveys the content if the parameter is a data type. Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a
valueBoolean			boolean	Data type boolean
resource	Σ I	0..0	Resource	There are no (further) constraints on this element Element id Parameters.parameter:vaccinationPatientType.part:statusVaccinationPatientType.resource Short description If parameter is a whole resource Definition If the parameter is a whole resource. Comments When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods. Data type Resource Mappings rim: Entity. Role, or Act
part	Σ	0..0	see (parameter)	There are no (further) constraints on this element Element id Parameters.parameter:vaccinationPatientType.part:statusVaccinationPatientType.part Short description Named part of a multi-part parameter Definition A named part of a multi-part parameter. Comments Only one level of nested parameters is allowed.

O recurso medication é identificado pelo recurso Parameters (Parameters.parameter.part.resource) para identificar o medicamento. Para mais informações sobre a implementação deste recurso, no contexto do presente caso de uso, consultar: MedicationPTPS profile

Medication	I		Medication	There are no (further) constraints on this element Element id Medication Short description Definition of a Medication Definition This resource is primarily used for the identification and definition of a medication for the purposes of prescribing, dispensing, and administering a medication as well as for making statements about medication use. Data type Medication Constraints dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources `contained.contained.empty()` dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated `contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()` dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource `contained.where(((id.exists() and ('#'+id in (%resource.descendants().reference \| %resource.descendants().as(canonical) \| %resource.descendants().as(uri) \| %resource.descendants().as(url)))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(uri) = '#').exists()).not()).trace('unmatched', id).empty()` dom-6: A resource should have narrative for robust management text.`div`.exists() dom-5: If a resource is contained in another resource, it SHALL NOT have a security label `contained.meta.security.empty()` Mappings rim: Entity. Role, or Act script10.6: NewRx/MedicationPrescribed -or- RxFill/MedicationDispensed -or- RxHistoryResponse/MedicationDispensed -or- RxHistoryResponse/MedicationPrescribed rim: ManufacturedProduct[classCode=ADMM] w5: clinical.medication
id	Σ	1..1	id	There are no (further) constraints on this element Element id Medication.id Short description Logical id of this artifact Definition The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes. Comments The only time that a resource does not have an id is when it is being submitted to the server using a create operation. Data type id
meta	Σ	0..1	Meta PT Core	There are no (further) constraints on this element Element id Medication.meta Short description Metadata about the resource Definition The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource. Data type Meta PT Core Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a rim: N/A
implicitRules	Σ ?!	0..1	uri	There are no (further) constraints on this element Element id Medication.implicitRules Short description A set of rules under which this content was created Definition A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc. Comments Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc. Data type uri Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a
language		0..1	codeBinding	There are no (further) constraints on this element Element id Medication.language Short description Language of the resource content Definition The base language in which the resource is written. Comments Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute). Data type code Binding IETF language tag Common Languages (preferred) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a
text		0..1	Narrative	There are no (further) constraints on this element Element id Medication.text Short description Text summary of the resource, for human interpretation Alternate names narrative, html, xhtml, display Definition A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety. Comments Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later. Data type Narrative Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a rim: N/A rim: Act.text?
contained	I	0..*	Resource	There are no (further) constraints on this element Element id Medication.contained Short description Contained, inline Resources Alternate names inline resources, anonymous resources, contained resources Definition These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope. Comments This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels. Data type Resource Constraints dom-r4b: Containing new R4B resources within R4 resources may cause interoperability issues if instances are shared with R4 systems ($this is Citation or $this is Evidence or $this is EvidenceReport or $this is EvidenceVariable or $this is MedicinalProductDefinition or $this is PackagedProductDefinition or $this is AdministrableProductDefinition or $this is Ingredient or $this is ClinicalUseDefinition or $this is RegulatedAuthorization or $this is SubstanceDefinition or $this is SubscriptionStatus or $this is SubscriptionTopic) implies (%resource is Citation or %resource is Evidence or %resource is EvidenceReport or %resource is EvidenceVariable or %resource is MedicinalProductDefinition or %resource is PackagedProductDefinition or %resource is AdministrableProductDefinition or %resource is Ingredient or %resource is ClinicalUseDefinition or %resource is RegulatedAuthorization or %resource is SubstanceDefinition or %resource is SubscriptionStatus or %resource is SubscriptionTopic) Mappings rim: Entity. Role, or Act rim: N/A
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Medication.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
marketingAuthorizationHolderPTExtension	I	0..*	Extension(Reference(Organization PT TRV))	There are no (further) constraints on this element Element id Medication.extension:marketingAuthorizationHolderPTExtension Short description Optional Extensions Element Alternate names extensions, user content Definition Titular da Autorização de Introdução no Mercado Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension(Reference(Organization PT TRV)) Extension URL https://spms.min-saude.pt/fhir-r4B/iop/StructureDefinition/MarketingAuthorizationHolderPTExtension Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
authorizationTypePTExtension	I	0..0	Extension(CodeableConcept PT Core)	Element id Medication.extension:authorizationTypePTExtension Short description Optional Extensions Element Alternate names extensions, user content Definition Optional Extension Element - found in all resources. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension(CodeableConcept PT Core) Extension URL https://spms.min-saude.pt/fhir-r4B/iop/StructureDefinition/AuthorizationTypePTExtension Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	?! I	0..*	Extension	There are no (further) constraints on this element Element id Medication.modifierExtension Short description Extensions that cannot be ignored Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
identifier	Σ	0..*	Extension Identifier PT Core	There are no (further) constraints on this element Element id Medication.identifier Short description An identifier intended for computation Definition Identificador do medicamento. Comments The serial number could be included as an identifier. Data type Extension Identifier PT Core Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CX / EI (occasionally, more often EI maps to a resource id or a URL) rim: II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd: Identifier w5: FiveWs.identifier rim: .id
code	Σ	0..1	Codeable Concept MED Code PT Core	Element id Medication.code Short description Concept - reference to a terminology or just text Definition Código do medicamento. Requirements Para o código do medicamento utilizar o Código CHNM para medicamentos de uso hospitalar ou Número de Registo nos outros casos. No caso de produtos sem codigo de registo ou CHNM indicar a descrição do produto no elemento 'code.text'. Comments Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination. Data type Codeable Concept MED Code PT Core Binding A coded concept that defines the type of a medication. SNOMED CT Medication Codes (example) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD script10.6: coding.code = //element(,MedicationType)/DrugCoded/ProductCode coding.system = //element(,MedicationType)/DrugCoded/ProductCodeQualifier coding.display = //element(,MedicationType)/DrugDescription w5:* FiveWs.class v2: RXO-1.1-Requested Give Code.code / RXE-2.1-Give Code.code / RXD-2.1-Dispense/Give Code.code / RXG-4.1-Give Code.code /RXA-5.1-Administered Code.code / RXC-2.1 Component Code rim: .code
id		0..1	id	There are no (further) constraints on this element Element id Medication.code.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type id Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Medication.code.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
coding	Σ	0..*	Coding PT Core	There are no (further) constraints on this element Element id Medication.code.coding Short description A reference to a code defined by a terminology system Definition A reference to a code defined by a terminology system. Requirements Allows for alternative encodings within a code system, and translations to other code systems. Comments Codes may be defined very casually in enumerations or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Data type Coding PT Core Sliced: Unordered, Open, by id(Value) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim: CV orim: fhir:Coding rdfs:subClassOf dt:CDCoding v2: CE.1-8, CE.10-22 rim: union(., ./translation) orim: fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
EMA	Σ	0..*	Coding PT Core	There are no (further) constraints on this element Element id Medication.code.coding:EMA Short description A reference to a code defined by a terminology system Definition Número do Medicamento na Agência Europeia de Medicamentos Requirements Allows for alternative encodings within a code system, and translations to other code systems. Comments Codes may be defined very casually in enumerations or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Data type Coding PT Core Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim: CV orim: fhir:Coding rdfs:subClassOf dt:CDCoding v2: CE.1-8, CE.10-22 rim: union(., ./translation) orim: fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
id		0..1	idFixed Value	There are no (further) constraints on this element Element id Medication.code.coding:EMA.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type id Fixed value EMA Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Medication.code.coding:EMA.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
system	Σ	1..1	uriFixed Value	There are no (further) constraints on this element Element id Medication.code.coding:EMA.system Short description Identity of the terminology system Definition The identification of the code system that defines the meaning of the symbol in the code. Requirements Need to be unambiguous about the source of the definition of the symbol. Comments The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously. Data type uri Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Fixed value https://www.ema.europa.eu Mappings rim: n/a v2: CE.3 rim:* ./codeSystem orim: fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem
version	Σ	0..0	string	There are no (further) constraints on this element Element id Medication.code.coding:EMA.version Short description Version of the system - if relevant Definition The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged. Comments Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date. Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE.7 rim:* ./codeSystemVersion orim: fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion
code	Σ	1..1	code	There are no (further) constraints on this element Element id Medication.code.coding:EMA.code Short description Symbol in syntax defined by the system Definition A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination). Requirements Need to refer to a particular code in the system. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type code Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE.1 rim:* ./code orim: fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code
display	Σ	1..1	string	There are no (further) constraints on this element Element id Medication.code.coding:EMA.display Short description Representation defined by the system Definition A representation of the meaning of the code in the system, following the rules of the system. Requirements Need to be able to carry a human-readable meaning of the code for readers that do not know the system. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE.2 - but note this is not well followed rim:* CV.displayName orim: fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName
userSelected	Σ	0..0	boolean	There are no (further) constraints on this element Element id Medication.code.coding:EMA.userSelected Short description If this coding was chosen directly by the user Definition Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays). Requirements This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing. Comments Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely. Data type boolean Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: Sometimes implied by being first rim: CD.codingRationale orim: fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]
absentUnknownMedication	Σ	0..0	Coding PT CoreBinding	There are no (further) constraints on this element Element id Medication.code.coding:absentUnknownMedication Short description A reference to a code defined by a terminology system Definition Identifica quando não é conhecido o medicamento ou quando não há registos de relevantes de medicamentos. Requirements Allows for alternative encodings within a code system, and translations to other code systems. Comments Value set Name ID: AbsentOrUnknownMedication Data type Coding PT Core Binding https://www.ctc.min-saude.pt/catalogos/apoio-ao-registo-da-medicacao (required) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim: CV orim: fhir:Coding rdfs:subClassOf dt:CDCoding v2: CE.1-8, CE.10-22 rim: union(., ./translation) orim: fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
ATC	Σ	0..0	Coding PT Core	There are no (further) constraints on this element Element id Medication.code.coding:ATC Short description A reference to a code defined by a terminology system Definition Número do Medicamento no ATC Requirements Allows for alternative encodings within a code system, and translations to other code systems. Comments Codes may be defined very casually in enumerations or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Data type Coding PT Core Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim: CV orim: fhir:Coding rdfs:subClassOf dt:CDCoding v2: CE.1-8, CE.10-22 rim: union(., ./translation) orim: fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
RN-PT	Σ	0..*	Coding PT Core	There are no (further) constraints on this element Element id Medication.code.coding:RN-PT Short description A reference to a code defined by a terminology system Definition Número de Registo do Medicamento do INFARMED Requirements Allows for alternative encodings within a code system, and translations to other code systems. Comments Codes may be defined very casually in enumerations or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Data type Coding PT Core Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim: CV orim: fhir:Coding rdfs:subClassOf dt:CDCoding v2: CE.1-8, CE.10-22 rim: union(., ./translation) orim: fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
id		0..1	idFixed Value	There are no (further) constraints on this element Element id Medication.code.coding:RN-PT.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type id Fixed value RN-PT Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Medication.code.coding:RN-PT.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
system	Σ	1..1	uriFixed Value	There are no (further) constraints on this element Element id Medication.code.coding:RN-PT.system Short description Identity of the terminology system Definition The identification of the code system that defines the meaning of the symbol in the code. Requirements Need to be unambiguous about the source of the definition of the symbol. Comments The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously. Data type uri Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Fixed value https://www.infarmed.pt Mappings rim: n/a v2: CE.3 rim:* ./codeSystem orim: fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem
version	Σ	0..0	string	There are no (further) constraints on this element Element id Medication.code.coding:RN-PT.version Short description Version of the system - if relevant Definition The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged. Comments Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date. Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE.7 rim:* ./codeSystemVersion orim: fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion
code	Σ	1..1	code	There are no (further) constraints on this element Element id Medication.code.coding:RN-PT.code Short description Symbol in syntax defined by the system Definition A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination). Requirements Need to refer to a particular code in the system. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type code Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE.1 rim:* ./code orim: fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code
display	Σ	1..1	string	There are no (further) constraints on this element Element id Medication.code.coding:RN-PT.display Short description Representation defined by the system Definition A representation of the meaning of the code in the system, following the rules of the system. Requirements Need to be able to carry a human-readable meaning of the code for readers that do not know the system. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE.2 - but note this is not well followed rim:* CV.displayName orim: fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName
userSelected	Σ	0..0	boolean	There are no (further) constraints on this element Element id Medication.code.coding:RN-PT.userSelected Short description If this coding was chosen directly by the user Definition Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays). Requirements This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing. Comments Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely. Data type boolean Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: Sometimes implied by being first rim: CD.codingRationale orim: fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]
CHNM-PT	Σ	0..0	Coding PT Core	There are no (further) constraints on this element Element id Medication.code.coding:CHNM-PT Short description A reference to a code defined by a terminology system Definition Código Hospitalar Nacional do Medicamento do INFARMED Requirements Allows for alternative encodings within a code system, and translations to other code systems. Comments Codes may be defined very casually in enumerations or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Data type Coding PT Core Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim: CV orim: fhir:Coding rdfs:subClassOf dt:CDCoding v2: CE.1-8, CE.10-22 rim: union(., ./translation) orim: fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
CNPEM-PT	Σ	0..0	Coding PT Core	There are no (further) constraints on this element Element id Medication.code.coding:CNPEM-PT Short description A reference to a code defined by a terminology system Definition Código Nacional para a Prescrição Eletrónica de Medicamentos do INFARMED Requirements Allows for alternative encodings within a code system, and translations to other code systems. Comments Codes may be defined very casually in enumerations or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Data type Coding PT Core Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim: CV orim: fhir:Coding rdfs:subClassOf dt:CDCoding v2: CE.1-8, CE.10-22 rim: union(., ./translation) orim: fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
CNID-PT	Σ	0..0	Coding PT Core	There are no (further) constraints on this element Element id Medication.code.coding:CNID-PT Short description A reference to a code defined by a terminology system Definition Código Nacional para a Identificação Comercial do Medicamento do INFARMED (MED_ID) Requirements Allows for alternative encodings within a code system, and translations to other code systems. Comments Codes may be defined very casually in enumerations or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Data type Coding PT Core Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim: CV orim: fhir:Coding rdfs:subClassOf dt:CDCoding v2: CE.1-8, CE.10-22 rim: union(., ./translation) orim: fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
DCI-PT	Σ	0..0	Coding PT Core	There are no (further) constraints on this element Element id Medication.code.coding:DCI-PT Short description A reference to a code defined by a terminology system Definition Denominação Comum Internacional em Português das substâncias ativas dos medicamentos Requirements Allows for alternative encodings within a code system, and translations to other code systems. Comments Codes may be defined very casually in enumerations or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Data type Coding PT Core Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim: CV orim: fhir:Coding rdfs:subClassOf dt:CDCoding v2: CE.1-8, CE.10-22 rim: union(., ./translation) orim: fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
text	Σ	1..1	string	There are no (further) constraints on this element Element id Medication.code.text Short description Plain text representation of the concept Definition A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user. Requirements The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source. Comments Very often the text is the same as a displayName of one of the codings. Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE.9. But note many systems use CE.2 for this rim: ./originalText[mediaType/code="text/plain"]/data orim: fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText
status	Σ ?!	0..0	codeBinding	There are no (further) constraints on this element Element id Medication.status Short description active \| inactive \| entered-in-error Definition Identifica o estado do medicamento Comments This status is intended to identify if the medication in a local system is in active use within a drug database or inventory. For example, a pharmacy system may create a new drug file record for a compounded product "ABC Hospital Special Cream" with an active status. At some point in the future, it may be determined that the drug record was created with an error and the status is changed to "entered in error". This status is not intended to specify if a medication is part of a particular formulary. It is possible that the drug record may be referenced by multiple formularies or catalogues and each of those entries would have a separate status. Data type code Binding A coded concept defining if the medication is in active use. Medication Status Codes (required) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a rim: .statusCode
manufacturer	Σ I	0..0	Reference(Organization PT Core)	There are no (further) constraints on this element Element id Medication.manufacturer Short description Manufacturer of the item Definition Identifica o fabricante do medicamento Comments References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository. Data type Reference(Organization PT Core) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')) or (reference='#' and %rootResource!=%resource)` Mappings rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity) script10.6: no mapping w5: FiveWs.actor v2: RXD-20-Substance Manufacturer Name / RXG-21-Substance Manufacturer Name / RXA-17-Substance Manufacturer Name rim: .player.scopingRole[typeCode=MANU].scoper
form		0..0	CodeableConcept PT CoreBinding	There are no (further) constraints on this element Element id Medication.form Short description Concept - reference to a terminology or just text Definition Identifica a forma farmacêutica. A forma farmacêutica apenas existe para os medicamentos. Comments Value Set Name: PharmaceuticalDoseForm Data type CodeableConcept PT Core Binding A coded concept defining the form of a medication. https://www.ctc.min-saude.pt/catalogos/apoio-ao-registo-da-medicacao (required) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD script10.6: coding.code = //element(,DrugCodedType)/FormCode coding.system = //element(,DrugCodedType)/FormSourceCode v2: RXO-5-Requested Dosage Form / RXE-6-Give Dosage Form / RXD-6-Actual Dosage Form / RXG-8-Give Dosage Form / RXA-8-Administered Dosage Form rim: .formCode
amount	Σ I	0..0	RatioPTCore	There are no (further) constraints on this element Element id Medication.amount Short description A ratio of two Quantity values - a numerator and a denominator Definition Quantidade de medicamento na embalagem Comments The Ratio datatype should only be used to express a relationship of two numbers if the relationship cannot be suitably expressed using a Quantity and a common unit. Where the denominator value is known to be fixed to "1", Quantity should be used instead of Ratio. Data type RatioPTCore Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` rat-1: Numerator and denominator SHALL both be present, or both are absent. If both are absent, there SHALL be some extension present `(numerator.exists() and denominator.exists()) or (numerator.empty() and denominator.empty() and extension.exists())` Mappings rim: n/a v2: N/A rim: RTO rim: .quantity
ingredient		0..0	BackboneElement	There are no (further) constraints on this element Element id Medication.ingredient Short description Active or inactive ingredient Definition Princípio ativo ou inativo Comments The ingredients need not be a complete list. If an ingredient is not specified, this does not indicate whether an ingredient is present or absent. If an ingredient is specified it does not mean that all ingredients are specified. It is possible to specify both inactive and active ingredients. Data type BackboneElement Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a rim: .scopesRole[typeCode=INGR]
batch		0..0	BackboneElement	There are no (further) constraints on this element Element id Medication.batch Short description Details about packaged medications Definition Detalhes do lote do medicamento Data type BackboneElement Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a script10.6: no mapping rim: .player[classCode=CONT]

O recurso Organization é referenciado pelo recurso MessageHeader (MessageHeader.sender e MessageHeader.destination[].receiver*) para identificar a entidade que envia e recebe a mensagem. Para mais informações sobre a implementação deste recurso, no contexto do presente caso de uso, consultar: OrganizationPTTRV profile

Organization	I		Organization	There are no (further) constraints on this element Element id Organization Short description A grouping of people or organizations with a common purpose Definition A formally or informally recognized grouping of people or organizations formed for the purpose of achieving some form of collective action. Includes companies, institutions, corporations, departments, community groups, healthcare practice groups, payer/insurer, etc. Data type Organization Constraints dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources `contained.contained.empty()` dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated `contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()` dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource `contained.where(((id.exists() and ('#'+id in (%resource.descendants().reference \| %resource.descendants().as(canonical) \| %resource.descendants().as(uri) \| %resource.descendants().as(url)))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(uri) = '#').exists()).not()).trace('unmatched', id).empty()` dom-6: A resource should have narrative for robust management text.`div`.exists() dom-5: If a resource is contained in another resource, it SHALL NOT have a security label `contained.meta.security.empty()` org-1: The organization SHALL at least have a name or an identifier, and possibly more than one `(identifier.count() + name.count()) > 0` Mappings rim: Entity. Role, or Act v2: (also see master files messages) rim: Organization(classCode=ORG, determinerCode=INST) servd: Organization w5: administrative.group
id	Σ	1..1	id	There are no (further) constraints on this element Element id Organization.id Short description Logical id of this artifact Definition The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes. Comments The only time that a resource does not have an id is when it is being submitted to the server using a create operation. Data type id
meta	Σ	0..1	Meta PT Core	There are no (further) constraints on this element Element id Organization.meta Short description Metadata about the resource Definition The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource. Data type Meta PT Core Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a rim: N/A
implicitRules	Σ ?!	0..1	uri	There are no (further) constraints on this element Element id Organization.implicitRules Short description A set of rules under which this content was created Definition A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc. Comments Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc. Data type uri Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a
language		0..1	codeBinding	There are no (further) constraints on this element Element id Organization.language Short description Language of the resource content Definition The base language in which the resource is written. Comments Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute). Data type code Binding IETF language tag Common Languages (preferred) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a
text		0..1	Narrative	There are no (further) constraints on this element Element id Organization.text Short description Text summary of the resource, for human interpretation Alternate names narrative, html, xhtml, display Definition A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety. Comments Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later. Data type Narrative Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a rim: N/A rim: Act.text?
contained	I	0..*	Resource	There are no (further) constraints on this element Element id Organization.contained Short description Contained, inline Resources Alternate names inline resources, anonymous resources, contained resources Definition These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope. Comments This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels. Data type Resource Constraints dom-r4b: Containing new R4B resources within R4 resources may cause interoperability issues if instances are shared with R4 systems ($this is Citation or $this is Evidence or $this is EvidenceReport or $this is EvidenceVariable or $this is MedicinalProductDefinition or $this is PackagedProductDefinition or $this is AdministrableProductDefinition or $this is Ingredient or $this is ClinicalUseDefinition or $this is RegulatedAuthorization or $this is SubstanceDefinition or $this is SubscriptionStatus or $this is SubscriptionTopic) implies (%resource is Citation or %resource is Evidence or %resource is EvidenceReport or %resource is EvidenceVariable or %resource is MedicinalProductDefinition or %resource is PackagedProductDefinition or %resource is AdministrableProductDefinition or %resource is Ingredient or %resource is ClinicalUseDefinition or %resource is RegulatedAuthorization or %resource is SubstanceDefinition or %resource is SubscriptionStatus or %resource is SubscriptionTopic) Mappings rim: Entity. Role, or Act rim: N/A
extension	I	0..0	Extension	There are no (further) constraints on this element Element id Organization.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	?! I	0..*	Extension	There are no (further) constraints on this element Element id Organization.modifierExtension Short description Extensions that cannot be ignored Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
identifier	Σ I	0..*	Extension Identifier PT Core	There are no (further) constraints on this element Element id Organization.identifier Short description An identifier intended for computation Definition Identificadores da Entidade Requirements Organizations are known by a variety of ids. Some institutions maintain several, and most collect identifiers for exchange with other organizations concerning the organization. Data type Extension Identifier PT Core Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CX / EI (occasionally, more often EI maps to a resource id or a URL) rim: II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd: Identifier w5: FiveWs.identifier v2: XON.10 / XON.3 rim: .scopes[Role](classCode=IDENT) servd: ./Identifiers
active	Σ ?!	0..0	boolean	There are no (further) constraints on this element Element id Organization.active Short description Whether the organization's record is still in active use Definition Indica se a entidade se encontra ativa ou inativa Requirements Need a flag to indicate a record is no longer to be used and should generally be hidden for the user in the UI. Comments This active flag is not intended to be used to mark an organization as temporarily closed or under construction. Instead the Location(s) within the Organization should have the suspended status. If further details of the reason for the suspension are required, then an extension on this element should be used. This element is labeled as a modifier because it may be used to mark that the resource was created in error. Meaning when missing This resource is generally assumed to be active if no value is provided for the active element Data type boolean Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a w5: FiveWs.status v2: No equivalent in HL7 v2 rim: .status servd: ./Status (however this concept in ServD more covers why the organization is active or not, could be delisted, deregistered, not operational yet) this could alternatively be derived from ./StartDate and ./EndDate and given a context date.
type	Σ	0..0	CodeableConcept PT Core	There are no (further) constraints on this element Element id Organization.type Short description Concept - reference to a terminology or just text Definition Tipo de entidade Requirements Need to be able to track the kind of organization that this is - different organization types have different uses. Comments Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination. Data type CodeableConcept PT Core Sliced: Unordered, Open, by id(Value) Binding Used to categorize the organization. OrganizationType (example) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD w5: FiveWs.class v2: No equivalent in v2 rim: .code servd: n/a
name	Σ I	0..1	string	There are no (further) constraints on this element Element id Organization.name Short description Name used for the organization Definition Nome da entidade. Requirements Need to use the name as the label of the organization. Comments If the name of an organization changes, consider putting the old name in the alias column so that it can still be located through searches. Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: XON.1 rim: .name servd: .PreferredName/Name
alias		0..0	string	There are no (further) constraints on this element Element id Organization.alias Short description A list of alternate names that the organization is known as, or was known as in the past Definition Designações alternativas pelas quais a entidade é ou era conhecida, como sigla ou nome abreviado. Requirements Over time locations and organizations go through many changes and can be known by different names. For searching knowing previous names that the organization was known by can be very useful. Comments There are no dates associated with the alias/historic names, as this is not intended to track when names were used, but to assist in searching so that older names can still result in identifying the organization. Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a rim: .name
telecom	I	0..0	ContactPoint	There are no (further) constraints on this element Element id Organization.telecom Short description A contact detail for the organization Definition A contact detail for the organization. Requirements Human contact for the organization. Comments The use code 'home' is not to be used. Note that these contacts are not the contact details of people who are employed by or represent the organization, but official contacts for the organization itself. Data type ContactPoint Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` cpt-2: A system is required if a value is provided. `value.empty() or system.exists()` org-3: The telecom of an organization can never be of use 'home' `where(use = 'home').empty()` Mappings rim: n/a v2: XTN rim: TEL servd: ContactPoint v2: ORC-22? rim: .telecom servd: ./ContactPoints
address	I	0..0	Address	There are no (further) constraints on this element Element id Organization.address Short description An address for the organization Definition An address for the organization. Requirements May need to keep track of the organization's addresses for contacting, billing or reporting requirements. Comments Organization may have multiple addresses with different uses or applicable periods. The use code 'home' is not to be used. Data type Address Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` org-2: An address of an organization can never be of use 'home' `where(use = 'home').empty()` Mappings rim: n/a v2: XAD rim: AD servd: Address v2: ORC-23? rim: .address servd: ./PrimaryAddress and ./OtherAddresses
partOf	Σ I	0..0	Reference(Organization PT Core)	There are no (further) constraints on this element Element id Organization.partOf Short description The organization of which this organization forms a part Definition Identifica a hierarquia da entidade, referenciando a entidade pai que lhe está associada Requirements Need to be able to track the hierarchy of organizations within an organization. Comments References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository. Data type Reference(Organization PT Core) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')) or (reference='#' and %rootResource!=%resource)` Mappings rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2: No equivalent in HL7 v2 rim: .playedBy[classCode=Part].scoper servd: n/a
contact		0..0	BackboneElement	There are no (further) constraints on this element Element id Organization.contact Short description Contact for the organization for a certain purpose Definition Contactos utilizados para propósitos específicos, na entidade Requirements Need to keep track of assigned contact points within bigger organization. Comments Where multiple contacts for the same purpose are provided there is a standard extension that can be used to determine which one is the preferred contact to use. Data type BackboneElement Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a rim: .contactParty
endpoint	I	0..0	Reference(Endpoint)	There are no (further) constraints on this element Element id Organization.endpoint Short description Technical endpoints providing access to services operated for the organization Definition Technical endpoints providing access to services operated for the organization. Requirements Organizations have multiple systems that provide various services and need to be able to define the technical connection details for how to connect to them, and for what purpose. Comments References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository. Data type Reference(Endpoint) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')) or (reference='#' and %rootResource!=%resource)` Mappings rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity)

Voltar ao início