Wales FHIR Implementation Guide

Important: All content in this FHIR Implementation Guide is under development

DataStandardsWales-DiagnosticReport-Lab

The Laboratory DiagnosticReport contains findings and interpretation of diagnostic tests performed on patients, groups of patients, devices, and locations, and/or specimens derived from these. The report includes clinical context such as requesting and provider information, and some mix of atomic results, images, textual and coded interpretations, and formatted representation of diagnostic reports.

The DataStandardsWales-DiagnosticReport-Lab profile will is derived from the Data Standards Wales DiagnosticReport Profile and defines additional rules for use within health and care organisations in Wales.

Profile Inheritance

Formal Views of Profile Content

Snapshot View
Differential View
Hybrid View
Examples

DiagnosticReport	I		DiagnosticReport	There are no (further) constraints on this element Element Id DiagnosticReport Short description A Diagnostic report - a combination of request information, atomic results, images, interpretation, as well as formatted reports Alternate names Report, Test, Result, Results, Labs, Laboratory Definition The findings and interpretation of diagnostic tests performed on patients, groups of patients, devices, and locations, and/or specimens derived from these. The report includes clinical context such as requesting and provider information, and some mix of atomic results, images, textual and coded interpretations, and formatted representation of diagnostic reports. Comments This is intended to capture a single report and is not suitable for use in displaying summary information that covers multiple reports. For example, this resource has not been designed for laboratory cumulative reporting formats nor detailed structured reports for sequencing. Data Type DiagnosticReport Constraints dom-2:If the resource is contained in another resource, it SHALL NOT contain nested Resources `contained.contained.empty()` dom-4:If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated `contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()` dom-3:If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource `contained.where((('#'+id in (%resource.descendants().reference \| %resource.descendants().as(canonical) \| %resource.descendants().as(uri) \| %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty()` dom-6:A resource should have narrative for robust management text.`div`.exists() dom-5:If a resource is contained in another resource, it SHALL NOT have a security label `contained.meta.security.empty()` Mappings rim:Entity. Role, or Act workflow:Event v2:ORU -> OBR rim:Observation[classCode=OBS, moodCode=EVN]
identifier	S Σ	0..*	Identifier	There are no (further) constraints on this element Element Id DiagnosticReport.identifier Short description Business identifier for report Alternate names ReportID, Filler ID, Placer ID Definition Identifiers assigned to this report by the performer or other systems. Requirements Need to know what identifier to use when making queries about this report from the source laboratory, and for linking to the report outside FHIR context. Comments Usually assigned by the Information System of the diagnostic service provider (filler id). Data Type Identifier Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CX / EI (occasionally, more often EI maps to a resource id or a URL) rim:II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd:Identifier workflow:Event.identifier w5:FiveWs.identifier v2:OBR-51/ for globally unique filler ID - OBR-3 , For non-globally unique filler-id the flller/placer number must be combined with the universal service Id - OBR-2(if present)+OBR-3+OBR-4 rim:id
use	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element Id DiagnosticReport.identifier.use Short description usual \| official \| temp \| secondary \| old (If known) Definition The purpose of this identifier. Requirements Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. Comments Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. Data Type code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:N/A rim:Role.code or implied by context
type	Σ	0..1	CodeableConceptBinding	There are no (further) constraints on this element Element Id DiagnosticReport.identifier.type Short description Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. Requirements Allows users to make use of identifiers when the identifier system is not known. Comments This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. Data Type CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE rim:CD orim:fhir:CodeableConcept rdfs:subClassOf dt:CD v2:CX.5 rim:Role.code or implied by context
system	Σ	0..1	uri	There are no (further) constraints on this element Element Id DiagnosticReport.identifier.system Short description The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique. Requirements There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. Comments Identifier.system is always case sensitive. Data Type uri Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General http://www.acme.com/identifiers/patient Mappings rim:n/a v2:CX.4 / EI-2-4 rim:II.root or Role.id.root servd:./IdentifierType
value	Σ	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.identifier.value Short description The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system. Comments If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General 123456 Mappings rim:n/a v2:CX.1 / EI.1 rim:II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd:./Value
period	Σ I	0..1	Period	There are no (further) constraints on this element Element Id DiagnosticReport.identifier.period Short description Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use. Comments A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration. Data Type Period Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` per-1:If present, start SHALL have a lower value than end `start.hasValue().not() or end.hasValue().not() or (start <= end)` Mappings rim:n/a v2:DR rim:IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"] v2:CX.7 + CX.8 rim:Role.effectiveTime or implied by context servd:./StartDate and ./EndDate
assigner	Σ I	0..1	Reference(UK Core Organization)	There are no (further) constraints on this element Element Id DiagnosticReport.identifier.assigner Short description Organization that issued id (may be just text) Definition Organization that issued/manages the identifier. Comments The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. Data Type Reference(UK Core Organization) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1:SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim:n/a rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2:CX.4 / (CX.4,CX.9,CX.10) rim:II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd:./IdentifierIssuingAuthority
basedOn	I	0..*	Reference(ImmunizationRecommendation \| NutritionOrder \| UK Core CarePlan \| UK Core MedicationRequest \| Data Standards Wales ServiceRequest Profile)	There are no (further) constraints on this element Element Id DiagnosticReport.basedOn Short description What was requested Alternate names Request Definition Details concerning a service requested. Requirements This allows tracing of authorization for the report and tracking whether proposals/recommendations were acted upon. Comments Note: Usually there is one test request for each result, however in some circumstances multiple test requests may be represented using a single test result resource. Note that there are also cases where one request leads to multiple reports. Data Type Reference(ImmunizationRecommendation \| NutritionOrder \| UK Core CarePlan \| UK Core MedicationRequest \| Data Standards Wales ServiceRequest Profile) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1:SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim:n/a rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity) workflow:Event.basedOn v2:ORC? OBR-2/3? rim:outboundRelationship[typeCode=FLFS].target
reference	Σ I	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.basedOn.reference Short description Literal reference, Relative, internal or absolute URL Definition A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources. Comments Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
type	Σ	0..1	uriBinding	There are no (further) constraints on this element Element Id DiagnosticReport.basedOn.type Short description Type the reference refers to (e.g. "Patient") Definition The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent. The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources). Comments This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified. Data Type uri Binding Aa resource (or, for logical models, the URI of the logical model). ResourceType (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
identifier	Σ	0..1	Identifier	There are no (further) constraints on this element Element Id DiagnosticReport.basedOn.identifier Short description Logical reference, when literal reference is not known Definition An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference. Comments When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it. Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation\|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any). Data Type Identifier Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CX / EI (occasionally, more often EI maps to a resource id or a URL) rim:II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd:Identifier rim:.identifier
use	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element Id DiagnosticReport.basedOn.identifier.use Short description usual \| official \| temp \| secondary \| old (If known) Definition The purpose of this identifier. Requirements Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. Comments Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. Data Type code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:N/A rim:Role.code or implied by context
type	Σ	0..1	CodeableConceptBinding	There are no (further) constraints on this element Element Id DiagnosticReport.basedOn.identifier.type Short description Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. Requirements Allows users to make use of identifiers when the identifier system is not known. Comments This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. Data Type CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE rim:CD orim:fhir:CodeableConcept rdfs:subClassOf dt:CD v2:CX.5 rim:Role.code or implied by context
system	Σ	0..1	uri	There are no (further) constraints on this element Element Id DiagnosticReport.basedOn.identifier.system Short description The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique. Requirements There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. Comments Identifier.system is always case sensitive. Data Type uri Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General http://www.acme.com/identifiers/patient Mappings rim:n/a v2:CX.4 / EI-2-4 rim:II.root or Role.id.root servd:./IdentifierType
value	Σ	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.basedOn.identifier.value Short description The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system. Comments If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General 123456 Mappings rim:n/a v2:CX.1 / EI.1 rim:II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd:./Value
period	Σ I	0..1	Period	There are no (further) constraints on this element Element Id DiagnosticReport.basedOn.identifier.period Short description Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use. Comments A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration. Data Type Period Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` per-1:If present, start SHALL have a lower value than end `start.hasValue().not() or end.hasValue().not() or (start <= end)` Mappings rim:n/a v2:DR rim:IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"] v2:CX.7 + CX.8 rim:Role.effectiveTime or implied by context servd:./StartDate and ./EndDate
assigner	Σ I	0..1	Reference(UK Core Organization)	There are no (further) constraints on this element Element Id DiagnosticReport.basedOn.identifier.assigner Short description Organization that issued id (may be just text) Definition Organization that issued/manages the identifier. Comments The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. Data Type Reference(UK Core Organization) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1:SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim:n/a rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2:CX.4 / (CX.4,CX.9,CX.10) rim:II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd:./IdentifierIssuingAuthority
display	Σ	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.basedOn.display Short description Text alternative for the resource Definition Plain text narrative that identifies the resource in addition to the resource reference. Comments This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
status	S Σ ?!	1..1	codeBinding	There are no (further) constraints on this element Element Id DiagnosticReport.status Short description registered \| partial \| preliminary \| final + Definition The status of the diagnostic report. Requirements Diagnostic services routinely issue provisional/incomplete reports, and sometimes withdraw previously released reports. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data Type code Binding The status of the diagnostic report. DiagnosticReportStatus (required) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a workflow:Event.status w5:FiveWs.status v2:OBR-25 (not 1:1 mapping) rim:statusCode Note: final and amended are distinguished by whether observation is the subject of a ControlAct event of type "revise"
category	S Σ	1..*	CodeableConcept	Element Id DiagnosticReport.category Short description Service category Alternate names Department, Sub-department, Service, Discipline Definition A code that classifies the clinical discipline, department or diagnostic service that created the report (e.g. cardiology, biochemistry, hematology, MRI). This is used for searching, sorting and display purposes. Comments Multiple categories are allowed using various categorization schemes. The level of granularity is defined by the category concepts in the value set. More fine-grained filtering can be performed using the metadata and/or terminology hierarchy in DiagnosticReport.code. Data Type CodeableConcept Sliced: Unordered, Open, by $this(Pattern) Binding Codes for diagnostic service sections. DiagnosticServiceSectionCodes (example) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE rim:CD orim:fhir:CodeableConcept rdfs:subClassOf dt:CD w5:FiveWs.class v2:OBR-24 rim:inboundRelationship[typeCode=COMP].source[classCode=LIST, moodCode=EVN, code < LabService].code
(All Slices)				There are no (further) constraints on this element
coding	Σ	0..*	Coding	There are no (further) constraints on this element Element Id DiagnosticReport.category.coding Short description Code defined by a terminology system Definition A reference to a code defined by a terminology system. Requirements Allows for alternative encodings within a code system, and translations to other code systems. Comments Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. Data Type Coding Sliced: Unordered, Open, by system(Value) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim:CV orim:fhir:Coding rdfs:subClassOf dt:CDCoding v2:CE.1-8, CE.10-22 rim:union(., ./translation) orim:fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
snomedCT	Σ	0..*	Coding	There are no (further) constraints on this element Element Id DiagnosticReport.category.coding:snomedCT Short description Code defined by a terminology system Definition A reference to a code defined by a terminology system. Requirements Allows for alternative encodings within a code system, and translations to other code systems. Comments Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. Data Type Coding Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim:CV orim:fhir:Coding rdfs:subClassOf dt:CDCoding v2:CE.1-8, CE.10-22 rim:union(., ./translation) orim:fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
system	Σ	1..1	uriFixed Value	There are no (further) constraints on this element Element Id DiagnosticReport.category.coding:snomedCT.system Short description Identity of the terminology system Definition The identification of the code system that defines the meaning of the symbol in the code. Requirements Need to be unambiguous about the source of the definition of the symbol. Comments The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously. Data Type uri Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Fixed Value http://snomed.info/sct Mappings rim:n/a v2:CE.3 rim:./codeSystem orim:*fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem
version	Σ	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.category.coding:snomedCT.version Short description Version of the system - if relevant Definition The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged. Comments Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE.7 rim:./codeSystemVersion orim:*fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion
code	Σ	1..1	code	There are no (further) constraints on this element Element Id DiagnosticReport.category.coding:snomedCT.code Short description Symbol in syntax defined by the system Definition A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination). Requirements Need to refer to a particular code in the system. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data Type code Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE.1 rim:./code orim:*fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code
display	Σ	1..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.category.coding:snomedCT.display Short description Representation defined by the system Definition A representation of the meaning of the code in the system, following the rules of the system. Requirements Need to be able to carry a human-readable meaning of the code for readers that do not know the system. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE.2 - but note this is not well followed rim:CV.displayName orim:*fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName
userSelected	Σ	0..1	boolean	There are no (further) constraints on this element Element Id DiagnosticReport.category.coding:snomedCT.userSelected Short description If this coding was chosen directly by the user Definition Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays). Requirements This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing. Comments Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely. Data Type boolean Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:Sometimes implied by being first rim:CD.codingRationale orim:fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]
text	Σ	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.category.text Short description Plain text representation of the concept Definition A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user. Requirements The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source. Comments Very often the text is the same as a displayName of one of the codings. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE.9. But note many systems use CE.2 for this rim:./originalText[mediaType/code="text/plain"]/data orim:fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText
LaboratorySlice	S Σ	1..1	CodeableConceptFixed Value	Element Id DiagnosticReport.category:LaboratorySlice Short description Service category Alternate names Department, Sub-department, Service, Discipline Definition A code that classifies the clinical discipline, department or diagnostic service that created the report (e.g. cardiology, biochemistry, hematology, MRI). This is used for searching, sorting and display purposes. Comments Multiple categories are allowed using various categorization schemes. The level of granularity is defined by the category concepts in the value set. More fine-grained filtering can be performed using the metadata and/or terminology hierarchy in DiagnosticReport.code. Data Type CodeableConcept Binding Codes for diagnostic service sections. DiagnosticServiceSectionCodes (example) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Fixed Value { "coding": [ { "system": "http://terminology.hl7.org/CodeSystem/v2-0074", "version": "2.5.0", "code": "LAB", "display": "Laboratory" } ] } Mappings rim:n/a v2:CE/CNE/CWE rim:CD orim:fhir:CodeableConcept rdfs:subClassOf dt:CD w5:FiveWs.class v2:OBR-24 rim:inboundRelationship[typeCode=COMP].source[classCode=LIST, moodCode=EVN, code < LabService].code
coding	Σ	0..*	Coding	There are no (further) constraints on this element Element Id DiagnosticReport.category:LaboratorySlice.coding Short description Code defined by a terminology system Definition A reference to a code defined by a terminology system. Requirements Allows for alternative encodings within a code system, and translations to other code systems. Comments Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. Data Type Coding Sliced: Unordered, Open, by system(Value) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim:CV orim:fhir:Coding rdfs:subClassOf dt:CDCoding v2:CE.1-8, CE.10-22 rim:union(., ./translation) orim:fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
snomedCT	Σ	0..*	Coding	There are no (further) constraints on this element Element Id DiagnosticReport.category:LaboratorySlice.coding:snomedCT Short description Code defined by a terminology system Definition A reference to a code defined by a terminology system. Requirements Allows for alternative encodings within a code system, and translations to other code systems. Comments Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. Data Type Coding Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim:CV orim:fhir:Coding rdfs:subClassOf dt:CDCoding v2:CE.1-8, CE.10-22 rim:union(., ./translation) orim:fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
system	Σ	1..1	uriFixed Value	There are no (further) constraints on this element Element Id DiagnosticReport.category:LaboratorySlice.coding:snomedCT.system Short description Identity of the terminology system Definition The identification of the code system that defines the meaning of the symbol in the code. Requirements Need to be unambiguous about the source of the definition of the symbol. Comments The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously. Data Type uri Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Fixed Value http://snomed.info/sct Mappings rim:n/a v2:CE.3 rim:./codeSystem orim:*fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem
version	Σ	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.category:LaboratorySlice.coding:snomedCT.version Short description Version of the system - if relevant Definition The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged. Comments Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE.7 rim:./codeSystemVersion orim:*fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion
code	Σ	1..1	code	There are no (further) constraints on this element Element Id DiagnosticReport.category:LaboratorySlice.coding:snomedCT.code Short description Symbol in syntax defined by the system Definition A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination). Requirements Need to refer to a particular code in the system. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data Type code Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE.1 rim:./code orim:*fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code
display	Σ	1..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.category:LaboratorySlice.coding:snomedCT.display Short description Representation defined by the system Definition A representation of the meaning of the code in the system, following the rules of the system. Requirements Need to be able to carry a human-readable meaning of the code for readers that do not know the system. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE.2 - but note this is not well followed rim:CV.displayName orim:*fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName
userSelected	Σ	0..1	boolean	There are no (further) constraints on this element Element Id DiagnosticReport.category:LaboratorySlice.coding:snomedCT.userSelected Short description If this coding was chosen directly by the user Definition Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays). Requirements This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing. Comments Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely. Data Type boolean Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:Sometimes implied by being first rim:CD.codingRationale orim:fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]
text	Σ	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.category:LaboratorySlice.text Short description Plain text representation of the concept Definition A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user. Requirements The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source. Comments Very often the text is the same as a displayName of one of the codings. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE.9. But note many systems use CE.2 for this rim:./originalText[mediaType/code="text/plain"]/data orim:fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText
code	S Σ	1..1	CodeableConceptBinding	There are no (further) constraints on this element Element Id DiagnosticReport.code Short description Name/Code for this diagnostic report Alternate names Type Definition A code or name that describes this diagnostic report. Comments Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination. Data Type CodeableConcept Binding Codes that describe Diagnostic Reports. LOINCDiagnosticReportCodes (preferred) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE rim:CD orim:fhir:CodeableConcept rdfs:subClassOf dt:CD workflow:Event.code w5:FiveWs.what[x] v2:OBR-4 (HL7 v2 doesn't provide an easy way to indicate both the ordered test and the performed panel) rim:code
coding	Σ	0..*	Coding	There are no (further) constraints on this element Element Id DiagnosticReport.code.coding Short description Code defined by a terminology system Definition A reference to a code defined by a terminology system. Requirements Allows for alternative encodings within a code system, and translations to other code systems. Comments Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. Data Type Coding Sliced: Unordered, Open, by system(Value) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim:CV orim:fhir:Coding rdfs:subClassOf dt:CDCoding v2:CE.1-8, CE.10-22 rim:union(., ./translation) orim:fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
snomedCT	Σ	0..*	CodingBinding	There are no (further) constraints on this element Element Id DiagnosticReport.code.coding:snomedCT Short description Code defined by a terminology system Definition A reference to a code defined by a terminology system. Requirements Allows for alternative encodings within a code system, and translations to other code systems. Comments Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. Data Type Coding Binding A code from the SNOMED UK Clinical Terminology coding system UKCoreReportCodeSnCT (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim:CV orim:fhir:Coding rdfs:subClassOf dt:CDCoding v2:CE.1-8, CE.10-22 rim:union(., ./translation) orim:fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
system	Σ	1..1	uriFixed Value	There are no (further) constraints on this element Element Id DiagnosticReport.code.coding:snomedCT.system Short description Identity of the terminology system Definition The identification of the code system that defines the meaning of the symbol in the code. Requirements Need to be unambiguous about the source of the definition of the symbol. Comments The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously. Data Type uri Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Fixed Value http://snomed.info/sct Mappings rim:n/a v2:CE.3 rim:./codeSystem orim:*fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem
version	Σ	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.code.coding:snomedCT.version Short description Version of the system - if relevant Definition The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged. Comments Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE.7 rim:./codeSystemVersion orim:*fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion
code	Σ	1..1	code	There are no (further) constraints on this element Element Id DiagnosticReport.code.coding:snomedCT.code Short description Symbol in syntax defined by the system Definition A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination). Requirements Need to refer to a particular code in the system. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data Type code Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE.1 rim:./code orim:*fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code
display	Σ	1..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.code.coding:snomedCT.display Short description Representation defined by the system Definition A representation of the meaning of the code in the system, following the rules of the system. Requirements Need to be able to carry a human-readable meaning of the code for readers that do not know the system. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE.2 - but note this is not well followed rim:CV.displayName orim:*fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName
userSelected	Σ	0..1	boolean	There are no (further) constraints on this element Element Id DiagnosticReport.code.coding:snomedCT.userSelected Short description If this coding was chosen directly by the user Definition Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays). Requirements This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing. Comments Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely. Data Type boolean Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:Sometimes implied by being first rim:CD.codingRationale orim:fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]
text	Σ	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.code.text Short description Plain text representation of the concept Definition A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user. Requirements The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source. Comments Very often the text is the same as a displayName of one of the codings. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE.9. But note many systems use CE.2 for this rim:./originalText[mediaType/code="text/plain"]/data orim:fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText
subject	S Σ I	1..1	Reference(Group \| Device \| Data Standards Wales Patient Profile \| Data Standards Wales Location Profile)	There are no (further) constraints on this element Element Id DiagnosticReport.subject Short description The subject of the report - usually, but not always, the patient Alternate names Patient Definition The subject of the report. Usually, but not always, this is a patient. However, diagnostic services also perform analyses on specimens collected from a variety of other sources. Requirements SHALL know the subject context. Comments References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository. Data Type Reference(Group \| Device \| Data Standards Wales Patient Profile \| Data Standards Wales Location Profile) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1:SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim:n/a rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity) workflow:Event.subject w5:FiveWs.subject[x] v2:PID-3 (no HL7 v2 mapping for Group or Device) rim:participation[typeCode=SBJ] w5:FiveWs.subject
reference	Σ I	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.subject.reference Short description Literal reference, Relative, internal or absolute URL Definition A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources. Comments Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
type	Σ	0..1	uriBinding	There are no (further) constraints on this element Element Id DiagnosticReport.subject.type Short description Type the reference refers to (e.g. "Patient") Definition The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent. The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources). Comments This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified. Data Type uri Binding Aa resource (or, for logical models, the URI of the logical model). ResourceType (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
identifier	Σ	0..1	Identifier	There are no (further) constraints on this element Element Id DiagnosticReport.subject.identifier Short description Logical reference, when literal reference is not known Definition An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference. Comments When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it. Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation\|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any). Data Type Identifier Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CX / EI (occasionally, more often EI maps to a resource id or a URL) rim:II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd:Identifier rim:.identifier
use	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element Id DiagnosticReport.subject.identifier.use Short description usual \| official \| temp \| secondary \| old (If known) Definition The purpose of this identifier. Requirements Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. Comments Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. Data Type code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:N/A rim:Role.code or implied by context
type	Σ	0..1	CodeableConceptBinding	There are no (further) constraints on this element Element Id DiagnosticReport.subject.identifier.type Short description Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. Requirements Allows users to make use of identifiers when the identifier system is not known. Comments This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. Data Type CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE rim:CD orim:fhir:CodeableConcept rdfs:subClassOf dt:CD v2:CX.5 rim:Role.code or implied by context
system	Σ	0..1	uri	There are no (further) constraints on this element Element Id DiagnosticReport.subject.identifier.system Short description The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique. Requirements There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. Comments Identifier.system is always case sensitive. Data Type uri Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General http://www.acme.com/identifiers/patient Mappings rim:n/a v2:CX.4 / EI-2-4 rim:II.root or Role.id.root servd:./IdentifierType
value	Σ	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.subject.identifier.value Short description The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system. Comments If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General 123456 Mappings rim:n/a v2:CX.1 / EI.1 rim:II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd:./Value
period	Σ I	0..1	Period	There are no (further) constraints on this element Element Id DiagnosticReport.subject.identifier.period Short description Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use. Comments A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration. Data Type Period Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` per-1:If present, start SHALL have a lower value than end `start.hasValue().not() or end.hasValue().not() or (start <= end)` Mappings rim:n/a v2:DR rim:IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"] v2:CX.7 + CX.8 rim:Role.effectiveTime or implied by context servd:./StartDate and ./EndDate
assigner	Σ I	0..1	Reference(UK Core Organization)	There are no (further) constraints on this element Element Id DiagnosticReport.subject.identifier.assigner Short description Organization that issued id (may be just text) Definition Organization that issued/manages the identifier. Comments The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. Data Type Reference(UK Core Organization) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1:SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim:n/a rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2:CX.4 / (CX.4,CX.9,CX.10) rim:II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd:./IdentifierIssuingAuthority
display	Σ	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.subject.display Short description Text alternative for the resource Definition Plain text narrative that identifies the resource in addition to the resource reference. Comments This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
encounter	S Σ I	0..1	Reference(Data Standards Wales Encounter Profile)	There are no (further) constraints on this element Element Id DiagnosticReport.encounter Short description Health care event when test ordered Alternate names Context Definition The healthcare event (e.g. a patient and healthcare provider interaction) which this DiagnosticReport is about. Requirements Links the request to the Encounter context. Comments This will typically be the encounter the event occurred within, but some events may be initiated prior to or after the official completion of an encounter but still be tied to the context of the encounter (e.g. pre-admission laboratory tests). Data Type Reference(Data Standards Wales Encounter Profile) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1:SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim:n/a rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity) workflow:Event.encounter w5:FiveWs.context v2:PV1-19 rim:inboundRelationship[typeCode=COMP].source[classCode=ENC, moodCode=EVN]
reference	Σ I	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.encounter.reference Short description Literal reference, Relative, internal or absolute URL Definition A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources. Comments Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
type	Σ	0..1	uriBinding	There are no (further) constraints on this element Element Id DiagnosticReport.encounter.type Short description Type the reference refers to (e.g. "Patient") Definition The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent. The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources). Comments This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified. Data Type uri Binding Aa resource (or, for logical models, the URI of the logical model). ResourceType (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
identifier	Σ	0..1	Identifier	There are no (further) constraints on this element Element Id DiagnosticReport.encounter.identifier Short description Logical reference, when literal reference is not known Definition An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference. Comments When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it. Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation\|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any). Data Type Identifier Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CX / EI (occasionally, more often EI maps to a resource id or a URL) rim:II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd:Identifier rim:.identifier
use	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element Id DiagnosticReport.encounter.identifier.use Short description usual \| official \| temp \| secondary \| old (If known) Definition The purpose of this identifier. Requirements Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. Comments Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. Data Type code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:N/A rim:Role.code or implied by context
type	Σ	0..1	CodeableConceptBinding	There are no (further) constraints on this element Element Id DiagnosticReport.encounter.identifier.type Short description Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. Requirements Allows users to make use of identifiers when the identifier system is not known. Comments This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. Data Type CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE rim:CD orim:fhir:CodeableConcept rdfs:subClassOf dt:CD v2:CX.5 rim:Role.code or implied by context
system	Σ	0..1	uri	There are no (further) constraints on this element Element Id DiagnosticReport.encounter.identifier.system Short description The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique. Requirements There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. Comments Identifier.system is always case sensitive. Data Type uri Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General http://www.acme.com/identifiers/patient Mappings rim:n/a v2:CX.4 / EI-2-4 rim:II.root or Role.id.root servd:./IdentifierType
value	Σ	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.encounter.identifier.value Short description The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system. Comments If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General 123456 Mappings rim:n/a v2:CX.1 / EI.1 rim:II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd:./Value
period	Σ I	0..1	Period	There are no (further) constraints on this element Element Id DiagnosticReport.encounter.identifier.period Short description Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use. Comments A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration. Data Type Period Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` per-1:If present, start SHALL have a lower value than end `start.hasValue().not() or end.hasValue().not() or (start <= end)` Mappings rim:n/a v2:DR rim:IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"] v2:CX.7 + CX.8 rim:Role.effectiveTime or implied by context servd:./StartDate and ./EndDate
assigner	Σ I	0..1	Reference(UK Core Organization)	There are no (further) constraints on this element Element Id DiagnosticReport.encounter.identifier.assigner Short description Organization that issued id (may be just text) Definition Organization that issued/manages the identifier. Comments The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. Data Type Reference(UK Core Organization) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1:SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim:n/a rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2:CX.4 / (CX.4,CX.9,CX.10) rim:II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd:./IdentifierIssuingAuthority
display	Σ	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.encounter.display Short description Text alternative for the resource Definition Plain text narrative that identifies the resource in addition to the resource reference. Comments This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
effective[x]	S Σ	0..1		There are no (further) constraints on this element Element Id DiagnosticReport.effective[x] Short description Clinically relevant time/time-period for report Alternate names Observation time, Effective Time, Occurrence Definition The time or time-period the observed values are related to. When the subject of the report is a patient, this is usually either the time of the procedure or of specimen collection(s), but very often the source of the date/time is not known, only the date/time itself. Requirements Need to know where in the patient history to file/present this report. Comments If the diagnostic procedure was performed on the patient, this is the time it was performed. If there are specimens, the diagnostically relevant time can be derived from the specimen collection times, but the specimen information is not always available, and the exact relationship between the specimens and the diagnostically relevant time is not always automatic. Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a workflow:Event.occurrence[x] w5:FiveWs.done[x] v2:OBR-7 rim:effectiveTime
effectiveDateTime			dateTime	There are no (further) constraints on this element Data Type dateTime
effectivePeriod			Period	There are no (further) constraints on this element Data Type Period
issued	S Σ	0..1	instant	There are no (further) constraints on this element Element Id DiagnosticReport.issued Short description DateTime this version was made Alternate names Date published, Date Issued, Date Verified Definition The date and time that this version of the report was made available to providers, typically after the report was reviewed and verified. Requirements Clinicians need to be able to check the date that the report was released. Comments May be different from the update time of the resource itself, because that is the status of the record (potentially a secondary copy), not the actual release time of the report. Data Type instant Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a w5:FiveWs.recorded v2:OBR-22 rim:participation[typeCode=VRF or AUT].time
performer	Σ I	0..*	Reference(Data Standards Wales Practitioner Profile \| Data Standards Wales PractitionerRole Profile \| Data Standards Wales Organization Profile)	There are no (further) constraints on this element Element Id DiagnosticReport.performer Short description Responsible Diagnostic Service Alternate names Laboratory, Service, Practitioner, Department, Company, Authorized by, Director Definition The diagnostic service that is responsible for issuing the report. Requirements Need to know whom to contact if there are queries about the results. Also may need to track the source of reports for secondary data analysis. Comments This is not necessarily the source of the atomic data items or the entity that interpreted the results. It is the entity that takes responsibility for the clinical report. Data Type Reference(Data Standards Wales Practitioner Profile \| Data Standards Wales PractitionerRole Profile \| Data Standards Wales Organization Profile) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1:SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim:n/a rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity) workflow:Event.performer.actor w5:FiveWs.actor v2:PRT-8 (where this PRT-4-Participation = "PO") rim:.participation[typeCode=PRF]
reference	Σ I	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.performer.reference Short description Literal reference, Relative, internal or absolute URL Definition A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources. Comments Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
type	Σ	0..1	uriBinding	There are no (further) constraints on this element Element Id DiagnosticReport.performer.type Short description Type the reference refers to (e.g. "Patient") Definition The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent. The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources). Comments This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified. Data Type uri Binding Aa resource (or, for logical models, the URI of the logical model). ResourceType (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
identifier	Σ	0..1	Identifier	There are no (further) constraints on this element Element Id DiagnosticReport.performer.identifier Short description Logical reference, when literal reference is not known Definition An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference. Comments When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it. Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation\|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any). Data Type Identifier Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CX / EI (occasionally, more often EI maps to a resource id or a URL) rim:II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd:Identifier rim:.identifier
use	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element Id DiagnosticReport.performer.identifier.use Short description usual \| official \| temp \| secondary \| old (If known) Definition The purpose of this identifier. Requirements Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. Comments Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. Data Type code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:N/A rim:Role.code or implied by context
type	Σ	0..1	CodeableConceptBinding	There are no (further) constraints on this element Element Id DiagnosticReport.performer.identifier.type Short description Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. Requirements Allows users to make use of identifiers when the identifier system is not known. Comments This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. Data Type CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE rim:CD orim:fhir:CodeableConcept rdfs:subClassOf dt:CD v2:CX.5 rim:Role.code or implied by context
system	Σ	0..1	uri	There are no (further) constraints on this element Element Id DiagnosticReport.performer.identifier.system Short description The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique. Requirements There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. Comments Identifier.system is always case sensitive. Data Type uri Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General http://www.acme.com/identifiers/patient Mappings rim:n/a v2:CX.4 / EI-2-4 rim:II.root or Role.id.root servd:./IdentifierType
value	Σ	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.performer.identifier.value Short description The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system. Comments If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General 123456 Mappings rim:n/a v2:CX.1 / EI.1 rim:II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd:./Value
period	Σ I	0..1	Period	There are no (further) constraints on this element Element Id DiagnosticReport.performer.identifier.period Short description Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use. Comments A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration. Data Type Period Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` per-1:If present, start SHALL have a lower value than end `start.hasValue().not() or end.hasValue().not() or (start <= end)` Mappings rim:n/a v2:DR rim:IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"] v2:CX.7 + CX.8 rim:Role.effectiveTime or implied by context servd:./StartDate and ./EndDate
assigner	Σ I	0..1	Reference(UK Core Organization)	There are no (further) constraints on this element Element Id DiagnosticReport.performer.identifier.assigner Short description Organization that issued id (may be just text) Definition Organization that issued/manages the identifier. Comments The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. Data Type Reference(UK Core Organization) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1:SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim:n/a rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2:CX.4 / (CX.4,CX.9,CX.10) rim:II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd:./IdentifierIssuingAuthority
display	Σ	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.performer.display Short description Text alternative for the resource Definition Plain text narrative that identifies the resource in addition to the resource reference. Comments This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
resultsInterpreter	Σ I	0..*	Reference(Data Standards Wales Practitioner Profile \| Data Standards Wales PractitionerRole Profile \| Data Standards Wales Organization Profile)	There are no (further) constraints on this element Element Id DiagnosticReport.resultsInterpreter Short description Primary result interpreter Alternate names Analyzed by, Reported by Definition The practitioner or organization that is responsible for the report's conclusions and interpretations. Requirements Need to know whom to contact if there are queries about the results. Also may need to track the source of reports for secondary data analysis. Comments Might not be the same entity that takes responsibility for the clinical report. Data Type Reference(Data Standards Wales Practitioner Profile \| Data Standards Wales PractitionerRole Profile \| Data Standards Wales Organization Profile) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1:SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim:n/a rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity) workflow:Event.performer.actor w5:FiveWs.actor v2:OBR-32, PRT-8 (where this PRT-4-Participation = "PI") rim:.participation[typeCode=PRF]
reference	Σ I	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.resultsInterpreter.reference Short description Literal reference, Relative, internal or absolute URL Definition A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources. Comments Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
type	Σ	0..1	uriBinding	There are no (further) constraints on this element Element Id DiagnosticReport.resultsInterpreter.type Short description Type the reference refers to (e.g. "Patient") Definition The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent. The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources). Comments This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified. Data Type uri Binding Aa resource (or, for logical models, the URI of the logical model). ResourceType (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
identifier	Σ	0..1	Identifier	There are no (further) constraints on this element Element Id DiagnosticReport.resultsInterpreter.identifier Short description Logical reference, when literal reference is not known Definition An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference. Comments When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it. Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation\|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any). Data Type Identifier Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CX / EI (occasionally, more often EI maps to a resource id or a URL) rim:II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd:Identifier rim:.identifier
use	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element Id DiagnosticReport.resultsInterpreter.identifier.use Short description usual \| official \| temp \| secondary \| old (If known) Definition The purpose of this identifier. Requirements Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. Comments Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. Data Type code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:N/A rim:Role.code or implied by context
type	Σ	0..1	CodeableConceptBinding	There are no (further) constraints on this element Element Id DiagnosticReport.resultsInterpreter.identifier.type Short description Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. Requirements Allows users to make use of identifiers when the identifier system is not known. Comments This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. Data Type CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE rim:CD orim:fhir:CodeableConcept rdfs:subClassOf dt:CD v2:CX.5 rim:Role.code or implied by context
system	Σ	0..1	uri	There are no (further) constraints on this element Element Id DiagnosticReport.resultsInterpreter.identifier.system Short description The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique. Requirements There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. Comments Identifier.system is always case sensitive. Data Type uri Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General http://www.acme.com/identifiers/patient Mappings rim:n/a v2:CX.4 / EI-2-4 rim:II.root or Role.id.root servd:./IdentifierType
value	Σ	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.resultsInterpreter.identifier.value Short description The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system. Comments If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General 123456 Mappings rim:n/a v2:CX.1 / EI.1 rim:II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd:./Value
period	Σ I	0..1	Period	There are no (further) constraints on this element Element Id DiagnosticReport.resultsInterpreter.identifier.period Short description Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use. Comments A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration. Data Type Period Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` per-1:If present, start SHALL have a lower value than end `start.hasValue().not() or end.hasValue().not() or (start <= end)` Mappings rim:n/a v2:DR rim:IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"] v2:CX.7 + CX.8 rim:Role.effectiveTime or implied by context servd:./StartDate and ./EndDate
assigner	Σ I	0..1	Reference(UK Core Organization)	There are no (further) constraints on this element Element Id DiagnosticReport.resultsInterpreter.identifier.assigner Short description Organization that issued id (may be just text) Definition Organization that issued/manages the identifier. Comments The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. Data Type Reference(UK Core Organization) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1:SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim:n/a rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2:CX.4 / (CX.4,CX.9,CX.10) rim:II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd:./IdentifierIssuingAuthority
display	Σ	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.resultsInterpreter.display Short description Text alternative for the resource Definition Plain text narrative that identifies the resource in addition to the resource reference. Comments This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
specimen	S I	0..*	Reference(Data Standards Wales Specimen Profile)	There are no (further) constraints on this element Element Id DiagnosticReport.specimen Short description Specimens this report is based on Definition Details about the specimens on which this diagnostic report is based. Requirements Need to be able to report information about the collected specimens on which the report is based. Comments If the specimen is sufficiently specified with a code in the test result name, then this additional data may be redundant. If there are multiple specimens, these may be represented per observation or group. Data Type Reference(Data Standards Wales Specimen Profile) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1:SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim:n/a rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2:SPM rim:participation[typeCode=SBJ]
reference	Σ I	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.specimen.reference Short description Literal reference, Relative, internal or absolute URL Definition A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources. Comments Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
type	Σ	0..1	uriBinding	There are no (further) constraints on this element Element Id DiagnosticReport.specimen.type Short description Type the reference refers to (e.g. "Patient") Definition The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent. The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources). Comments This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified. Data Type uri Binding Aa resource (or, for logical models, the URI of the logical model). ResourceType (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
identifier	Σ	0..1	Identifier	There are no (further) constraints on this element Element Id DiagnosticReport.specimen.identifier Short description Logical reference, when literal reference is not known Definition An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference. Comments When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it. Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation\|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any). Data Type Identifier Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CX / EI (occasionally, more often EI maps to a resource id or a URL) rim:II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd:Identifier rim:.identifier
use	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element Id DiagnosticReport.specimen.identifier.use Short description usual \| official \| temp \| secondary \| old (If known) Definition The purpose of this identifier. Requirements Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. Comments Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. Data Type code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:N/A rim:Role.code or implied by context
type	Σ	0..1	CodeableConceptBinding	There are no (further) constraints on this element Element Id DiagnosticReport.specimen.identifier.type Short description Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. Requirements Allows users to make use of identifiers when the identifier system is not known. Comments This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. Data Type CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE rim:CD orim:fhir:CodeableConcept rdfs:subClassOf dt:CD v2:CX.5 rim:Role.code or implied by context
system	Σ	0..1	uri	There are no (further) constraints on this element Element Id DiagnosticReport.specimen.identifier.system Short description The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique. Requirements There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. Comments Identifier.system is always case sensitive. Data Type uri Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General http://www.acme.com/identifiers/patient Mappings rim:n/a v2:CX.4 / EI-2-4 rim:II.root or Role.id.root servd:./IdentifierType
value	Σ	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.specimen.identifier.value Short description The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system. Comments If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General 123456 Mappings rim:n/a v2:CX.1 / EI.1 rim:II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd:./Value
period	Σ I	0..1	Period	There are no (further) constraints on this element Element Id DiagnosticReport.specimen.identifier.period Short description Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use. Comments A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration. Data Type Period Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` per-1:If present, start SHALL have a lower value than end `start.hasValue().not() or end.hasValue().not() or (start <= end)` Mappings rim:n/a v2:DR rim:IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"] v2:CX.7 + CX.8 rim:Role.effectiveTime or implied by context servd:./StartDate and ./EndDate
assigner	Σ I	0..1	Reference(UK Core Organization)	There are no (further) constraints on this element Element Id DiagnosticReport.specimen.identifier.assigner Short description Organization that issued id (may be just text) Definition Organization that issued/manages the identifier. Comments The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. Data Type Reference(UK Core Organization) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1:SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim:n/a rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2:CX.4 / (CX.4,CX.9,CX.10) rim:II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd:./IdentifierIssuingAuthority
display	Σ	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.specimen.display Short description Text alternative for the resource Definition Plain text narrative that identifies the resource in addition to the resource reference. Comments This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
result	S I	1..1	Reference(Data Standards Wales Observation Profile)	There are no (further) constraints on this element Element Id DiagnosticReport.result Short description Observations Alternate names Data, Atomic Value, Result, Atomic result, Data, Test, Analyte, Battery, Organizer Definition Observations that are part of this diagnostic report. Requirements Need to support individual results, or groups of results, where the result grouping is arbitrary, but meaningful. Comments Observations can contain observations. Data Type Reference(Data Standards Wales Observation Profile) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1:SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim:n/a rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2:OBXs rim:outboundRelationship[typeCode=COMP].target
reference	Σ I	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.result.reference Short description Literal reference, Relative, internal or absolute URL Definition A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources. Comments Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
type	Σ	0..1	uriBinding	There are no (further) constraints on this element Element Id DiagnosticReport.result.type Short description Type the reference refers to (e.g. "Patient") Definition The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent. The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources). Comments This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified. Data Type uri Binding Aa resource (or, for logical models, the URI of the logical model). ResourceType (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
identifier	Σ	0..1	Identifier	There are no (further) constraints on this element Element Id DiagnosticReport.result.identifier Short description Logical reference, when literal reference is not known Definition An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference. Comments When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it. Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation\|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any). Data Type Identifier Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CX / EI (occasionally, more often EI maps to a resource id or a URL) rim:II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd:Identifier rim:.identifier
use	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element Id DiagnosticReport.result.identifier.use Short description usual \| official \| temp \| secondary \| old (If known) Definition The purpose of this identifier. Requirements Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. Comments Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. Data Type code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:N/A rim:Role.code or implied by context
type	Σ	0..1	CodeableConceptBinding	There are no (further) constraints on this element Element Id DiagnosticReport.result.identifier.type Short description Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. Requirements Allows users to make use of identifiers when the identifier system is not known. Comments This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. Data Type CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE rim:CD orim:fhir:CodeableConcept rdfs:subClassOf dt:CD v2:CX.5 rim:Role.code or implied by context
system	Σ	0..1	uri	There are no (further) constraints on this element Element Id DiagnosticReport.result.identifier.system Short description The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique. Requirements There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. Comments Identifier.system is always case sensitive. Data Type uri Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General http://www.acme.com/identifiers/patient Mappings rim:n/a v2:CX.4 / EI-2-4 rim:II.root or Role.id.root servd:./IdentifierType
value	Σ	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.result.identifier.value Short description The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system. Comments If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General 123456 Mappings rim:n/a v2:CX.1 / EI.1 rim:II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd:./Value
period	Σ I	0..1	Period	There are no (further) constraints on this element Element Id DiagnosticReport.result.identifier.period Short description Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use. Comments A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration. Data Type Period Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` per-1:If present, start SHALL have a lower value than end `start.hasValue().not() or end.hasValue().not() or (start <= end)` Mappings rim:n/a v2:DR rim:IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"] v2:CX.7 + CX.8 rim:Role.effectiveTime or implied by context servd:./StartDate and ./EndDate
assigner	Σ I	0..1	Reference(UK Core Organization)	There are no (further) constraints on this element Element Id DiagnosticReport.result.identifier.assigner Short description Organization that issued id (may be just text) Definition Organization that issued/manages the identifier. Comments The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. Data Type Reference(UK Core Organization) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1:SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim:n/a rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2:CX.4 / (CX.4,CX.9,CX.10) rim:II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd:./IdentifierIssuingAuthority
display	Σ	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.result.display Short description Text alternative for the resource Definition Plain text narrative that identifies the resource in addition to the resource reference. Comments This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
imagingStudy	S I	0..*	Reference(Data Standards Wales ImagingStudy Profile)	There are no (further) constraints on this element Element Id DiagnosticReport.imagingStudy Short description Reference to full details of imaging associated with the diagnostic report Definition One or more links to full details of any imaging performed during the diagnostic investigation. Typically, this is imaging performed by DICOM enabled modalities, but this is not required. A fully enabled PACS viewer can use this information to provide views of the source images. Comments ImagingStudy and the image element are somewhat overlapping - typically, the list of image references in the image element will also be found in one of the imaging study resources. However, each caters to different types of displays for different types of purposes. Neither, either, or both may be provided. Data Type Reference(Data Standards Wales ImagingStudy Profile) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1:SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim:n/a rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity) rim:outboundRelationship[typeCode=COMP].target[classsCode=DGIMG, moodCode=EVN]
reference	Σ I	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.imagingStudy.reference Short description Literal reference, Relative, internal or absolute URL Definition A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources. Comments Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
type	Σ	0..1	uriBinding	There are no (further) constraints on this element Element Id DiagnosticReport.imagingStudy.type Short description Type the reference refers to (e.g. "Patient") Definition The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent. The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources). Comments This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified. Data Type uri Binding Aa resource (or, for logical models, the URI of the logical model). ResourceType (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
identifier	Σ	0..1	Identifier	There are no (further) constraints on this element Element Id DiagnosticReport.imagingStudy.identifier Short description Logical reference, when literal reference is not known Definition An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference. Comments When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it. Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation\|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any). Data Type Identifier Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CX / EI (occasionally, more often EI maps to a resource id or a URL) rim:II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd:Identifier rim:.identifier
use	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element Id DiagnosticReport.imagingStudy.identifier.use Short description usual \| official \| temp \| secondary \| old (If known) Definition The purpose of this identifier. Requirements Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. Comments Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. Data Type code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:N/A rim:Role.code or implied by context
type	Σ	0..1	CodeableConceptBinding	There are no (further) constraints on this element Element Id DiagnosticReport.imagingStudy.identifier.type Short description Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. Requirements Allows users to make use of identifiers when the identifier system is not known. Comments This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. Data Type CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE rim:CD orim:fhir:CodeableConcept rdfs:subClassOf dt:CD v2:CX.5 rim:Role.code or implied by context
system	Σ	0..1	uri	There are no (further) constraints on this element Element Id DiagnosticReport.imagingStudy.identifier.system Short description The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique. Requirements There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. Comments Identifier.system is always case sensitive. Data Type uri Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General http://www.acme.com/identifiers/patient Mappings rim:n/a v2:CX.4 / EI-2-4 rim:II.root or Role.id.root servd:./IdentifierType
value	Σ	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.imagingStudy.identifier.value Short description The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system. Comments If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General 123456 Mappings rim:n/a v2:CX.1 / EI.1 rim:II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd:./Value
period	Σ I	0..1	Period	There are no (further) constraints on this element Element Id DiagnosticReport.imagingStudy.identifier.period Short description Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use. Comments A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration. Data Type Period Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` per-1:If present, start SHALL have a lower value than end `start.hasValue().not() or end.hasValue().not() or (start <= end)` Mappings rim:n/a v2:DR rim:IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"] v2:CX.7 + CX.8 rim:Role.effectiveTime or implied by context servd:./StartDate and ./EndDate
assigner	Σ I	0..1	Reference(UK Core Organization)	There are no (further) constraints on this element Element Id DiagnosticReport.imagingStudy.identifier.assigner Short description Organization that issued id (may be just text) Definition Organization that issued/manages the identifier. Comments The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. Data Type Reference(UK Core Organization) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1:SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim:n/a rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2:CX.4 / (CX.4,CX.9,CX.10) rim:II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd:./IdentifierIssuingAuthority
display	Σ	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.imagingStudy.display Short description Text alternative for the resource Definition Plain text narrative that identifies the resource in addition to the resource reference. Comments This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
media	Σ	0..*	BackboneElement	There are no (further) constraints on this element Element Id DiagnosticReport.media Short description Key images associated with this report Alternate names DICOM, Slides, Scans Definition A list of key images associated with this report. The images are generally created during the diagnostic process, and may be directly of the patient, or of treated specimens (i.e. slides of interest). Requirements Many diagnostic services include images in the report as part of their service. Data Type BackboneElement Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:OBX? rim:outboundRelationship[typeCode=COMP].target
comment		0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.media.comment Short description Comment about the image (e.g. explanation) Definition A comment about the image. Typically, this is used to provide an explanation for why the image is included, or to draw the viewer's attention to important features. Requirements The provider of the report should make a comment about each image included in the report. Comments The comment should be displayed with the image. It would be common for the report to include additional discussion of the image contents in other sections such as the conclusion. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:.inboundRelationship[typeCode=COMP].source[classCode=OBS, moodCode=EVN, code="annotation"].value
link	Σ I	1..1	Reference(Media)	There are no (further) constraints on this element Element Id DiagnosticReport.media.link Short description Reference to the image source Definition Reference to the image source. Comments References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository. Data Type Reference(Media) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1:SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim:n/a rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity) rim:.value.reference
reference	Σ I	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.media.link.reference Short description Literal reference, Relative, internal or absolute URL Definition A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources. Comments Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
type	Σ	0..1	uriBinding	There are no (further) constraints on this element Element Id DiagnosticReport.media.link.type Short description Type the reference refers to (e.g. "Patient") Definition The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent. The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources). Comments This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified. Data Type uri Binding Aa resource (or, for logical models, the URI of the logical model). ResourceType (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
identifier	Σ	0..1	Identifier	There are no (further) constraints on this element Element Id DiagnosticReport.media.link.identifier Short description Logical reference, when literal reference is not known Definition An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference. Comments When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it. Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation\|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any). Data Type Identifier Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CX / EI (occasionally, more often EI maps to a resource id or a URL) rim:II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd:Identifier rim:.identifier
use	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element Id DiagnosticReport.media.link.identifier.use Short description usual \| official \| temp \| secondary \| old (If known) Definition The purpose of this identifier. Requirements Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. Comments Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. Data Type code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:N/A rim:Role.code or implied by context
type	Σ	0..1	CodeableConceptBinding	There are no (further) constraints on this element Element Id DiagnosticReport.media.link.identifier.type Short description Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. Requirements Allows users to make use of identifiers when the identifier system is not known. Comments This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. Data Type CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE rim:CD orim:fhir:CodeableConcept rdfs:subClassOf dt:CD v2:CX.5 rim:Role.code or implied by context
system	Σ	0..1	uri	There are no (further) constraints on this element Element Id DiagnosticReport.media.link.identifier.system Short description The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique. Requirements There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. Comments Identifier.system is always case sensitive. Data Type uri Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General http://www.acme.com/identifiers/patient Mappings rim:n/a v2:CX.4 / EI-2-4 rim:II.root or Role.id.root servd:./IdentifierType
value	Σ	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.media.link.identifier.value Short description The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system. Comments If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General 123456 Mappings rim:n/a v2:CX.1 / EI.1 rim:II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd:./Value
period	Σ I	0..1	Period	There are no (further) constraints on this element Element Id DiagnosticReport.media.link.identifier.period Short description Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use. Comments A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration. Data Type Period Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` per-1:If present, start SHALL have a lower value than end `start.hasValue().not() or end.hasValue().not() or (start <= end)` Mappings rim:n/a v2:DR rim:IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"] v2:CX.7 + CX.8 rim:Role.effectiveTime or implied by context servd:./StartDate and ./EndDate
assigner	Σ I	0..1	Reference(UK Core Organization)	There are no (further) constraints on this element Element Id DiagnosticReport.media.link.identifier.assigner Short description Organization that issued id (may be just text) Definition Organization that issued/manages the identifier. Comments The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. Data Type Reference(UK Core Organization) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1:SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim:n/a rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2:CX.4 / (CX.4,CX.9,CX.10) rim:II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd:./IdentifierIssuingAuthority
display	Σ	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.media.link.display Short description Text alternative for the resource Definition Plain text narrative that identifies the resource in addition to the resource reference. Comments This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
conclusion		0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.conclusion Short description Clinical conclusion (interpretation) of test results Alternate names Report Definition Concise and clinically contextualized summary conclusion (interpretation/impression) of the diagnostic report. Requirements Need to be able to provide a conclusion that is not lost among the basic result data. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:OBX rim:inboundRelationship[typeCode="SPRT"].source[classCode=OBS, moodCode=EVN, code=LOINC:48767-8].value (type=ST)
conclusionCode		0..*	CodeableConcept	There are no (further) constraints on this element Element Id DiagnosticReport.conclusionCode Short description Codes for the clinical conclusion of test results Definition One or more codes that represent the summary conclusion (interpretation/impression) of the diagnostic report. Comments Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination. Data Type CodeableConcept Binding Diagnosis codes provided as adjuncts to the report. SNOMEDCTClinicalFindings (example) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE rim:CD orim:fhir:CodeableConcept rdfs:subClassOf dt:CD v2:OBX rim:inboundRelationship[typeCode=SPRT].source[classCode=OBS, moodCode=EVN, code=LOINC:54531-9].value (type=CD)
coding	Σ	0..*	Coding	There are no (further) constraints on this element Element Id DiagnosticReport.conclusionCode.coding Short description Code defined by a terminology system Definition A reference to a code defined by a terminology system. Requirements Allows for alternative encodings within a code system, and translations to other code systems. Comments Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. Data Type Coding Sliced: Unordered, Open, by system(Value) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim:CV orim:fhir:Coding rdfs:subClassOf dt:CDCoding v2:CE.1-8, CE.10-22 rim:union(., ./translation) orim:fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
snomedCT	Σ	0..*	CodingBinding	There are no (further) constraints on this element Element Id DiagnosticReport.conclusionCode.coding:snomedCT Short description Code defined by a terminology system Definition A reference to a code defined by a terminology system. Requirements Allows for alternative encodings within a code system, and translations to other code systems. Comments Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. Data Type Coding Binding A code from the SNOMED UK Clinical Terminology coding system UKCoreFindingCode (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim:CV orim:fhir:Coding rdfs:subClassOf dt:CDCoding v2:CE.1-8, CE.10-22 rim:union(., ./translation) orim:fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
system	Σ	1..1	uriFixed Value	There are no (further) constraints on this element Element Id DiagnosticReport.conclusionCode.coding:snomedCT.system Short description Identity of the terminology system Definition The identification of the code system that defines the meaning of the symbol in the code. Requirements Need to be unambiguous about the source of the definition of the symbol. Comments The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously. Data Type uri Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Fixed Value http://snomed.info/sct Mappings rim:n/a v2:CE.3 rim:./codeSystem orim:*fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem
version	Σ	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.conclusionCode.coding:snomedCT.version Short description Version of the system - if relevant Definition The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged. Comments Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE.7 rim:./codeSystemVersion orim:*fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion
code	Σ	1..1	code	There are no (further) constraints on this element Element Id DiagnosticReport.conclusionCode.coding:snomedCT.code Short description Symbol in syntax defined by the system Definition A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination). Requirements Need to refer to a particular code in the system. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data Type code Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE.1 rim:./code orim:*fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code
display	Σ	1..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.conclusionCode.coding:snomedCT.display Short description Representation defined by the system Definition A representation of the meaning of the code in the system, following the rules of the system. Requirements Need to be able to carry a human-readable meaning of the code for readers that do not know the system. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE.2 - but note this is not well followed rim:CV.displayName orim:*fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName
userSelected	Σ	0..1	boolean	There are no (further) constraints on this element Element Id DiagnosticReport.conclusionCode.coding:snomedCT.userSelected Short description If this coding was chosen directly by the user Definition Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays). Requirements This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing. Comments Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely. Data Type boolean Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:Sometimes implied by being first rim:CD.codingRationale orim:fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]
text	Σ	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.conclusionCode.text Short description Plain text representation of the concept Definition A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user. Requirements The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source. Comments Very often the text is the same as a displayName of one of the codings. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE.9. But note many systems use CE.2 for this rim:./originalText[mediaType/code="text/plain"]/data orim:fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText
presentedForm	S I	0..*	Attachment	There are no (further) constraints on this element Element Id DiagnosticReport.presentedForm Short description Entire report as issued Definition Rich text representation of the entire result as issued by the diagnostic service. Multiple formats are allowed but they SHALL be semantically equivalent. Requirements Gives laboratory the ability to provide its own fully formatted report for clinical fidelity. Comments "application/pdf" is recommended as the most reliable and interoperable in this context. Data Type Attachment Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` att-1:If the Attachment has data, it SHALL have a contentType `data.empty() or contentType.exists()` Mappings rim:n/a v2:ED/RP rim:ED v2:OBX rim:text (type=ED)

DiagnosticReport	I		DiagnosticReport	There are no (further) constraints on this element Element Id DiagnosticReport Short description A Diagnostic report - a combination of request information, atomic results, images, interpretation, as well as formatted reports Alternate names Report, Test, Result, Results, Labs, Laboratory Definition The findings and interpretation of diagnostic tests performed on patients, groups of patients, devices, and locations, and/or specimens derived from these. The report includes clinical context such as requesting and provider information, and some mix of atomic results, images, textual and coded interpretations, and formatted representation of diagnostic reports. Comments This is intended to capture a single report and is not suitable for use in displaying summary information that covers multiple reports. For example, this resource has not been designed for laboratory cumulative reporting formats nor detailed structured reports for sequencing. Data Type DiagnosticReport Constraints dom-2:If the resource is contained in another resource, it SHALL NOT contain nested Resources `contained.contained.empty()` dom-4:If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated `contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()` dom-3:If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource `contained.where((('#'+id in (%resource.descendants().reference \| %resource.descendants().as(canonical) \| %resource.descendants().as(uri) \| %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty()` dom-6:A resource should have narrative for robust management text.`div`.exists() dom-5:If a resource is contained in another resource, it SHALL NOT have a security label `contained.meta.security.empty()` Mappings rim:Entity. Role, or Act workflow:Event v2:ORU -> OBR rim:Observation[classCode=OBS, moodCode=EVN]
identifier	S Σ	0..*	Identifier	There are no (further) constraints on this element Element Id DiagnosticReport.identifier Short description Business identifier for report Alternate names ReportID, Filler ID, Placer ID Definition Identifiers assigned to this report by the performer or other systems. Requirements Need to know what identifier to use when making queries about this report from the source laboratory, and for linking to the report outside FHIR context. Comments Usually assigned by the Information System of the diagnostic service provider (filler id). Data Type Identifier Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CX / EI (occasionally, more often EI maps to a resource id or a URL) rim:II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd:Identifier workflow:Event.identifier w5:FiveWs.identifier v2:OBR-51/ for globally unique filler ID - OBR-3 , For non-globally unique filler-id the flller/placer number must be combined with the universal service Id - OBR-2(if present)+OBR-3+OBR-4 rim:id
use	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element Id DiagnosticReport.identifier.use Short description usual \| official \| temp \| secondary \| old (If known) Definition The purpose of this identifier. Requirements Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. Comments Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. Data Type code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:N/A rim:Role.code or implied by context
type	Σ	0..1	CodeableConceptBinding	There are no (further) constraints on this element Element Id DiagnosticReport.identifier.type Short description Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. Requirements Allows users to make use of identifiers when the identifier system is not known. Comments This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. Data Type CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE rim:CD orim:fhir:CodeableConcept rdfs:subClassOf dt:CD v2:CX.5 rim:Role.code or implied by context
system	Σ	0..1	uri	There are no (further) constraints on this element Element Id DiagnosticReport.identifier.system Short description The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique. Requirements There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. Comments Identifier.system is always case sensitive. Data Type uri Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General http://www.acme.com/identifiers/patient Mappings rim:n/a v2:CX.4 / EI-2-4 rim:II.root or Role.id.root servd:./IdentifierType
value	Σ	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.identifier.value Short description The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system. Comments If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General 123456 Mappings rim:n/a v2:CX.1 / EI.1 rim:II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd:./Value
period	Σ I	0..1	Period	There are no (further) constraints on this element Element Id DiagnosticReport.identifier.period Short description Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use. Comments A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration. Data Type Period Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` per-1:If present, start SHALL have a lower value than end `start.hasValue().not() or end.hasValue().not() or (start <= end)` Mappings rim:n/a v2:DR rim:IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"] v2:CX.7 + CX.8 rim:Role.effectiveTime or implied by context servd:./StartDate and ./EndDate
assigner	Σ I	0..1	Reference(UK Core Organization)	There are no (further) constraints on this element Element Id DiagnosticReport.identifier.assigner Short description Organization that issued id (may be just text) Definition Organization that issued/manages the identifier. Comments The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. Data Type Reference(UK Core Organization) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1:SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim:n/a rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2:CX.4 / (CX.4,CX.9,CX.10) rim:II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd:./IdentifierIssuingAuthority
basedOn	I	0..*	Reference(ImmunizationRecommendation \| NutritionOrder \| UK Core CarePlan \| UK Core MedicationRequest \| Data Standards Wales ServiceRequest Profile)	There are no (further) constraints on this element Element Id DiagnosticReport.basedOn Short description What was requested Alternate names Request Definition Details concerning a service requested. Requirements This allows tracing of authorization for the report and tracking whether proposals/recommendations were acted upon. Comments Note: Usually there is one test request for each result, however in some circumstances multiple test requests may be represented using a single test result resource. Note that there are also cases where one request leads to multiple reports. Data Type Reference(ImmunizationRecommendation \| NutritionOrder \| UK Core CarePlan \| UK Core MedicationRequest \| Data Standards Wales ServiceRequest Profile) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1:SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim:n/a rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity) workflow:Event.basedOn v2:ORC? OBR-2/3? rim:outboundRelationship[typeCode=FLFS].target
reference	Σ I	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.basedOn.reference Short description Literal reference, Relative, internal or absolute URL Definition A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources. Comments Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
type	Σ	0..1	uriBinding	There are no (further) constraints on this element Element Id DiagnosticReport.basedOn.type Short description Type the reference refers to (e.g. "Patient") Definition The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent. The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources). Comments This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified. Data Type uri Binding Aa resource (or, for logical models, the URI of the logical model). ResourceType (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
identifier	Σ	0..1	Identifier	There are no (further) constraints on this element Element Id DiagnosticReport.basedOn.identifier Short description Logical reference, when literal reference is not known Definition An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference. Comments When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it. Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation\|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any). Data Type Identifier Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CX / EI (occasionally, more often EI maps to a resource id or a URL) rim:II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd:Identifier rim:.identifier
use	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element Id DiagnosticReport.basedOn.identifier.use Short description usual \| official \| temp \| secondary \| old (If known) Definition The purpose of this identifier. Requirements Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. Comments Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. Data Type code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:N/A rim:Role.code or implied by context
type	Σ	0..1	CodeableConceptBinding	There are no (further) constraints on this element Element Id DiagnosticReport.basedOn.identifier.type Short description Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. Requirements Allows users to make use of identifiers when the identifier system is not known. Comments This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. Data Type CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE rim:CD orim:fhir:CodeableConcept rdfs:subClassOf dt:CD v2:CX.5 rim:Role.code or implied by context
system	Σ	0..1	uri	There are no (further) constraints on this element Element Id DiagnosticReport.basedOn.identifier.system Short description The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique. Requirements There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. Comments Identifier.system is always case sensitive. Data Type uri Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General http://www.acme.com/identifiers/patient Mappings rim:n/a v2:CX.4 / EI-2-4 rim:II.root or Role.id.root servd:./IdentifierType
value	Σ	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.basedOn.identifier.value Short description The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system. Comments If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General 123456 Mappings rim:n/a v2:CX.1 / EI.1 rim:II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd:./Value
period	Σ I	0..1	Period	There are no (further) constraints on this element Element Id DiagnosticReport.basedOn.identifier.period Short description Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use. Comments A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration. Data Type Period Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` per-1:If present, start SHALL have a lower value than end `start.hasValue().not() or end.hasValue().not() or (start <= end)` Mappings rim:n/a v2:DR rim:IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"] v2:CX.7 + CX.8 rim:Role.effectiveTime or implied by context servd:./StartDate and ./EndDate
assigner	Σ I	0..1	Reference(UK Core Organization)	There are no (further) constraints on this element Element Id DiagnosticReport.basedOn.identifier.assigner Short description Organization that issued id (may be just text) Definition Organization that issued/manages the identifier. Comments The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. Data Type Reference(UK Core Organization) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1:SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim:n/a rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2:CX.4 / (CX.4,CX.9,CX.10) rim:II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd:./IdentifierIssuingAuthority
display	Σ	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.basedOn.display Short description Text alternative for the resource Definition Plain text narrative that identifies the resource in addition to the resource reference. Comments This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
status	S Σ ?!	1..1	codeBinding	There are no (further) constraints on this element Element Id DiagnosticReport.status Short description registered \| partial \| preliminary \| final + Definition The status of the diagnostic report. Requirements Diagnostic services routinely issue provisional/incomplete reports, and sometimes withdraw previously released reports. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data Type code Binding The status of the diagnostic report. DiagnosticReportStatus (required) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a workflow:Event.status w5:FiveWs.status v2:OBR-25 (not 1:1 mapping) rim:statusCode Note: final and amended are distinguished by whether observation is the subject of a ControlAct event of type "revise"
category	S Σ	1..*	CodeableConcept	Element Id DiagnosticReport.category Short description Service category Alternate names Department, Sub-department, Service, Discipline Definition A code that classifies the clinical discipline, department or diagnostic service that created the report (e.g. cardiology, biochemistry, hematology, MRI). This is used for searching, sorting and display purposes. Comments Multiple categories are allowed using various categorization schemes. The level of granularity is defined by the category concepts in the value set. More fine-grained filtering can be performed using the metadata and/or terminology hierarchy in DiagnosticReport.code. Data Type CodeableConcept Sliced: Unordered, Open, by $this(Pattern) Binding Codes for diagnostic service sections. DiagnosticServiceSectionCodes (example) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE rim:CD orim:fhir:CodeableConcept rdfs:subClassOf dt:CD w5:FiveWs.class v2:OBR-24 rim:inboundRelationship[typeCode=COMP].source[classCode=LIST, moodCode=EVN, code < LabService].code
(All Slices)				There are no (further) constraints on this element
coding	Σ	0..*	Coding	There are no (further) constraints on this element Element Id DiagnosticReport.category.coding Short description Code defined by a terminology system Definition A reference to a code defined by a terminology system. Requirements Allows for alternative encodings within a code system, and translations to other code systems. Comments Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. Data Type Coding Sliced: Unordered, Open, by system(Value) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim:CV orim:fhir:Coding rdfs:subClassOf dt:CDCoding v2:CE.1-8, CE.10-22 rim:union(., ./translation) orim:fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
snomedCT	Σ	0..*	Coding	There are no (further) constraints on this element Element Id DiagnosticReport.category.coding:snomedCT Short description Code defined by a terminology system Definition A reference to a code defined by a terminology system. Requirements Allows for alternative encodings within a code system, and translations to other code systems. Comments Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. Data Type Coding Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim:CV orim:fhir:Coding rdfs:subClassOf dt:CDCoding v2:CE.1-8, CE.10-22 rim:union(., ./translation) orim:fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
system	Σ	1..1	uriFixed Value	There are no (further) constraints on this element Element Id DiagnosticReport.category.coding:snomedCT.system Short description Identity of the terminology system Definition The identification of the code system that defines the meaning of the symbol in the code. Requirements Need to be unambiguous about the source of the definition of the symbol. Comments The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously. Data Type uri Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Fixed Value http://snomed.info/sct Mappings rim:n/a v2:CE.3 rim:./codeSystem orim:*fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem
version	Σ	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.category.coding:snomedCT.version Short description Version of the system - if relevant Definition The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged. Comments Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE.7 rim:./codeSystemVersion orim:*fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion
code	Σ	1..1	code	There are no (further) constraints on this element Element Id DiagnosticReport.category.coding:snomedCT.code Short description Symbol in syntax defined by the system Definition A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination). Requirements Need to refer to a particular code in the system. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data Type code Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE.1 rim:./code orim:*fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code
display	Σ	1..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.category.coding:snomedCT.display Short description Representation defined by the system Definition A representation of the meaning of the code in the system, following the rules of the system. Requirements Need to be able to carry a human-readable meaning of the code for readers that do not know the system. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE.2 - but note this is not well followed rim:CV.displayName orim:*fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName
userSelected	Σ	0..1	boolean	There are no (further) constraints on this element Element Id DiagnosticReport.category.coding:snomedCT.userSelected Short description If this coding was chosen directly by the user Definition Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays). Requirements This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing. Comments Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely. Data Type boolean Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:Sometimes implied by being first rim:CD.codingRationale orim:fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]
text	Σ	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.category.text Short description Plain text representation of the concept Definition A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user. Requirements The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source. Comments Very often the text is the same as a displayName of one of the codings. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE.9. But note many systems use CE.2 for this rim:./originalText[mediaType/code="text/plain"]/data orim:fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText
LaboratorySlice	S Σ	1..1	CodeableConceptFixed Value	Element Id DiagnosticReport.category:LaboratorySlice Short description Service category Alternate names Department, Sub-department, Service, Discipline Definition A code that classifies the clinical discipline, department or diagnostic service that created the report (e.g. cardiology, biochemistry, hematology, MRI). This is used for searching, sorting and display purposes. Comments Multiple categories are allowed using various categorization schemes. The level of granularity is defined by the category concepts in the value set. More fine-grained filtering can be performed using the metadata and/or terminology hierarchy in DiagnosticReport.code. Data Type CodeableConcept Binding Codes for diagnostic service sections. DiagnosticServiceSectionCodes (example) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Fixed Value { "coding": [ { "system": "http://terminology.hl7.org/CodeSystem/v2-0074", "version": "2.5.0", "code": "LAB", "display": "Laboratory" } ] } Mappings rim:n/a v2:CE/CNE/CWE rim:CD orim:fhir:CodeableConcept rdfs:subClassOf dt:CD w5:FiveWs.class v2:OBR-24 rim:inboundRelationship[typeCode=COMP].source[classCode=LIST, moodCode=EVN, code < LabService].code
coding	Σ	0..*	Coding	There are no (further) constraints on this element Element Id DiagnosticReport.category:LaboratorySlice.coding Short description Code defined by a terminology system Definition A reference to a code defined by a terminology system. Requirements Allows for alternative encodings within a code system, and translations to other code systems. Comments Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. Data Type Coding Sliced: Unordered, Open, by system(Value) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim:CV orim:fhir:Coding rdfs:subClassOf dt:CDCoding v2:CE.1-8, CE.10-22 rim:union(., ./translation) orim:fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
snomedCT	Σ	0..*	Coding	There are no (further) constraints on this element Element Id DiagnosticReport.category:LaboratorySlice.coding:snomedCT Short description Code defined by a terminology system Definition A reference to a code defined by a terminology system. Requirements Allows for alternative encodings within a code system, and translations to other code systems. Comments Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. Data Type Coding Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim:CV orim:fhir:Coding rdfs:subClassOf dt:CDCoding v2:CE.1-8, CE.10-22 rim:union(., ./translation) orim:fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
system	Σ	1..1	uriFixed Value	There are no (further) constraints on this element Element Id DiagnosticReport.category:LaboratorySlice.coding:snomedCT.system Short description Identity of the terminology system Definition The identification of the code system that defines the meaning of the symbol in the code. Requirements Need to be unambiguous about the source of the definition of the symbol. Comments The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously. Data Type uri Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Fixed Value http://snomed.info/sct Mappings rim:n/a v2:CE.3 rim:./codeSystem orim:*fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem
version	Σ	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.category:LaboratorySlice.coding:snomedCT.version Short description Version of the system - if relevant Definition The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged. Comments Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE.7 rim:./codeSystemVersion orim:*fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion
code	Σ	1..1	code	There are no (further) constraints on this element Element Id DiagnosticReport.category:LaboratorySlice.coding:snomedCT.code Short description Symbol in syntax defined by the system Definition A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination). Requirements Need to refer to a particular code in the system. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data Type code Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE.1 rim:./code orim:*fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code
display	Σ	1..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.category:LaboratorySlice.coding:snomedCT.display Short description Representation defined by the system Definition A representation of the meaning of the code in the system, following the rules of the system. Requirements Need to be able to carry a human-readable meaning of the code for readers that do not know the system. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE.2 - but note this is not well followed rim:CV.displayName orim:*fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName
userSelected	Σ	0..1	boolean	There are no (further) constraints on this element Element Id DiagnosticReport.category:LaboratorySlice.coding:snomedCT.userSelected Short description If this coding was chosen directly by the user Definition Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays). Requirements This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing. Comments Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely. Data Type boolean Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:Sometimes implied by being first rim:CD.codingRationale orim:fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]
text	Σ	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.category:LaboratorySlice.text Short description Plain text representation of the concept Definition A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user. Requirements The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source. Comments Very often the text is the same as a displayName of one of the codings. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE.9. But note many systems use CE.2 for this rim:./originalText[mediaType/code="text/plain"]/data orim:fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText
code	S Σ	1..1	CodeableConceptBinding	There are no (further) constraints on this element Element Id DiagnosticReport.code Short description Name/Code for this diagnostic report Alternate names Type Definition A code or name that describes this diagnostic report. Comments Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination. Data Type CodeableConcept Binding Codes that describe Diagnostic Reports. LOINCDiagnosticReportCodes (preferred) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE rim:CD orim:fhir:CodeableConcept rdfs:subClassOf dt:CD workflow:Event.code w5:FiveWs.what[x] v2:OBR-4 (HL7 v2 doesn't provide an easy way to indicate both the ordered test and the performed panel) rim:code
coding	Σ	0..*	Coding	There are no (further) constraints on this element Element Id DiagnosticReport.code.coding Short description Code defined by a terminology system Definition A reference to a code defined by a terminology system. Requirements Allows for alternative encodings within a code system, and translations to other code systems. Comments Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. Data Type Coding Sliced: Unordered, Open, by system(Value) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim:CV orim:fhir:Coding rdfs:subClassOf dt:CDCoding v2:CE.1-8, CE.10-22 rim:union(., ./translation) orim:fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
snomedCT	Σ	0..*	CodingBinding	There are no (further) constraints on this element Element Id DiagnosticReport.code.coding:snomedCT Short description Code defined by a terminology system Definition A reference to a code defined by a terminology system. Requirements Allows for alternative encodings within a code system, and translations to other code systems. Comments Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. Data Type Coding Binding A code from the SNOMED UK Clinical Terminology coding system UKCoreReportCodeSnCT (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim:CV orim:fhir:Coding rdfs:subClassOf dt:CDCoding v2:CE.1-8, CE.10-22 rim:union(., ./translation) orim:fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
system	Σ	1..1	uriFixed Value	There are no (further) constraints on this element Element Id DiagnosticReport.code.coding:snomedCT.system Short description Identity of the terminology system Definition The identification of the code system that defines the meaning of the symbol in the code. Requirements Need to be unambiguous about the source of the definition of the symbol. Comments The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously. Data Type uri Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Fixed Value http://snomed.info/sct Mappings rim:n/a v2:CE.3 rim:./codeSystem orim:*fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem
version	Σ	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.code.coding:snomedCT.version Short description Version of the system - if relevant Definition The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged. Comments Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE.7 rim:./codeSystemVersion orim:*fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion
code	Σ	1..1	code	There are no (further) constraints on this element Element Id DiagnosticReport.code.coding:snomedCT.code Short description Symbol in syntax defined by the system Definition A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination). Requirements Need to refer to a particular code in the system. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data Type code Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE.1 rim:./code orim:*fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code
display	Σ	1..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.code.coding:snomedCT.display Short description Representation defined by the system Definition A representation of the meaning of the code in the system, following the rules of the system. Requirements Need to be able to carry a human-readable meaning of the code for readers that do not know the system. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE.2 - but note this is not well followed rim:CV.displayName orim:*fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName
userSelected	Σ	0..1	boolean	There are no (further) constraints on this element Element Id DiagnosticReport.code.coding:snomedCT.userSelected Short description If this coding was chosen directly by the user Definition Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays). Requirements This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing. Comments Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely. Data Type boolean Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:Sometimes implied by being first rim:CD.codingRationale orim:fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]
text	Σ	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.code.text Short description Plain text representation of the concept Definition A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user. Requirements The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source. Comments Very often the text is the same as a displayName of one of the codings. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE.9. But note many systems use CE.2 for this rim:./originalText[mediaType/code="text/plain"]/data orim:fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText
subject	S Σ I	1..1	Reference(Group \| Device \| Data Standards Wales Patient Profile \| Data Standards Wales Location Profile)	There are no (further) constraints on this element Element Id DiagnosticReport.subject Short description The subject of the report - usually, but not always, the patient Alternate names Patient Definition The subject of the report. Usually, but not always, this is a patient. However, diagnostic services also perform analyses on specimens collected from a variety of other sources. Requirements SHALL know the subject context. Comments References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository. Data Type Reference(Group \| Device \| Data Standards Wales Patient Profile \| Data Standards Wales Location Profile) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1:SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim:n/a rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity) workflow:Event.subject w5:FiveWs.subject[x] v2:PID-3 (no HL7 v2 mapping for Group or Device) rim:participation[typeCode=SBJ] w5:FiveWs.subject
reference	Σ I	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.subject.reference Short description Literal reference, Relative, internal or absolute URL Definition A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources. Comments Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
type	Σ	0..1	uriBinding	There are no (further) constraints on this element Element Id DiagnosticReport.subject.type Short description Type the reference refers to (e.g. "Patient") Definition The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent. The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources). Comments This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified. Data Type uri Binding Aa resource (or, for logical models, the URI of the logical model). ResourceType (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
identifier	Σ	0..1	Identifier	There are no (further) constraints on this element Element Id DiagnosticReport.subject.identifier Short description Logical reference, when literal reference is not known Definition An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference. Comments When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it. Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation\|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any). Data Type Identifier Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CX / EI (occasionally, more often EI maps to a resource id or a URL) rim:II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd:Identifier rim:.identifier
use	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element Id DiagnosticReport.subject.identifier.use Short description usual \| official \| temp \| secondary \| old (If known) Definition The purpose of this identifier. Requirements Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. Comments Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. Data Type code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:N/A rim:Role.code or implied by context
type	Σ	0..1	CodeableConceptBinding	There are no (further) constraints on this element Element Id DiagnosticReport.subject.identifier.type Short description Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. Requirements Allows users to make use of identifiers when the identifier system is not known. Comments This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. Data Type CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE rim:CD orim:fhir:CodeableConcept rdfs:subClassOf dt:CD v2:CX.5 rim:Role.code or implied by context
system	Σ	0..1	uri	There are no (further) constraints on this element Element Id DiagnosticReport.subject.identifier.system Short description The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique. Requirements There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. Comments Identifier.system is always case sensitive. Data Type uri Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General http://www.acme.com/identifiers/patient Mappings rim:n/a v2:CX.4 / EI-2-4 rim:II.root or Role.id.root servd:./IdentifierType
value	Σ	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.subject.identifier.value Short description The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system. Comments If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General 123456 Mappings rim:n/a v2:CX.1 / EI.1 rim:II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd:./Value
period	Σ I	0..1	Period	There are no (further) constraints on this element Element Id DiagnosticReport.subject.identifier.period Short description Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use. Comments A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration. Data Type Period Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` per-1:If present, start SHALL have a lower value than end `start.hasValue().not() or end.hasValue().not() or (start <= end)` Mappings rim:n/a v2:DR rim:IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"] v2:CX.7 + CX.8 rim:Role.effectiveTime or implied by context servd:./StartDate and ./EndDate
assigner	Σ I	0..1	Reference(UK Core Organization)	There are no (further) constraints on this element Element Id DiagnosticReport.subject.identifier.assigner Short description Organization that issued id (may be just text) Definition Organization that issued/manages the identifier. Comments The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. Data Type Reference(UK Core Organization) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1:SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim:n/a rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2:CX.4 / (CX.4,CX.9,CX.10) rim:II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd:./IdentifierIssuingAuthority
display	Σ	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.subject.display Short description Text alternative for the resource Definition Plain text narrative that identifies the resource in addition to the resource reference. Comments This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
encounter	S Σ I	0..1	Reference(Data Standards Wales Encounter Profile)	There are no (further) constraints on this element Element Id DiagnosticReport.encounter Short description Health care event when test ordered Alternate names Context Definition The healthcare event (e.g. a patient and healthcare provider interaction) which this DiagnosticReport is about. Requirements Links the request to the Encounter context. Comments This will typically be the encounter the event occurred within, but some events may be initiated prior to or after the official completion of an encounter but still be tied to the context of the encounter (e.g. pre-admission laboratory tests). Data Type Reference(Data Standards Wales Encounter Profile) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1:SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim:n/a rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity) workflow:Event.encounter w5:FiveWs.context v2:PV1-19 rim:inboundRelationship[typeCode=COMP].source[classCode=ENC, moodCode=EVN]
reference	Σ I	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.encounter.reference Short description Literal reference, Relative, internal or absolute URL Definition A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources. Comments Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
type	Σ	0..1	uriBinding	There are no (further) constraints on this element Element Id DiagnosticReport.encounter.type Short description Type the reference refers to (e.g. "Patient") Definition The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent. The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources). Comments This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified. Data Type uri Binding Aa resource (or, for logical models, the URI of the logical model). ResourceType (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
identifier	Σ	0..1	Identifier	There are no (further) constraints on this element Element Id DiagnosticReport.encounter.identifier Short description Logical reference, when literal reference is not known Definition An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference. Comments When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it. Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation\|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any). Data Type Identifier Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CX / EI (occasionally, more often EI maps to a resource id or a URL) rim:II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd:Identifier rim:.identifier
use	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element Id DiagnosticReport.encounter.identifier.use Short description usual \| official \| temp \| secondary \| old (If known) Definition The purpose of this identifier. Requirements Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. Comments Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. Data Type code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:N/A rim:Role.code or implied by context
type	Σ	0..1	CodeableConceptBinding	There are no (further) constraints on this element Element Id DiagnosticReport.encounter.identifier.type Short description Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. Requirements Allows users to make use of identifiers when the identifier system is not known. Comments This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. Data Type CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE rim:CD orim:fhir:CodeableConcept rdfs:subClassOf dt:CD v2:CX.5 rim:Role.code or implied by context
system	Σ	0..1	uri	There are no (further) constraints on this element Element Id DiagnosticReport.encounter.identifier.system Short description The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique. Requirements There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. Comments Identifier.system is always case sensitive. Data Type uri Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General http://www.acme.com/identifiers/patient Mappings rim:n/a v2:CX.4 / EI-2-4 rim:II.root or Role.id.root servd:./IdentifierType
value	Σ	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.encounter.identifier.value Short description The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system. Comments If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General 123456 Mappings rim:n/a v2:CX.1 / EI.1 rim:II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd:./Value
period	Σ I	0..1	Period	There are no (further) constraints on this element Element Id DiagnosticReport.encounter.identifier.period Short description Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use. Comments A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration. Data Type Period Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` per-1:If present, start SHALL have a lower value than end `start.hasValue().not() or end.hasValue().not() or (start <= end)` Mappings rim:n/a v2:DR rim:IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"] v2:CX.7 + CX.8 rim:Role.effectiveTime or implied by context servd:./StartDate and ./EndDate
assigner	Σ I	0..1	Reference(UK Core Organization)	There are no (further) constraints on this element Element Id DiagnosticReport.encounter.identifier.assigner Short description Organization that issued id (may be just text) Definition Organization that issued/manages the identifier. Comments The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. Data Type Reference(UK Core Organization) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1:SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim:n/a rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2:CX.4 / (CX.4,CX.9,CX.10) rim:II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd:./IdentifierIssuingAuthority
display	Σ	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.encounter.display Short description Text alternative for the resource Definition Plain text narrative that identifies the resource in addition to the resource reference. Comments This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
effective[x]	S Σ	0..1		There are no (further) constraints on this element Element Id DiagnosticReport.effective[x] Short description Clinically relevant time/time-period for report Alternate names Observation time, Effective Time, Occurrence Definition The time or time-period the observed values are related to. When the subject of the report is a patient, this is usually either the time of the procedure or of specimen collection(s), but very often the source of the date/time is not known, only the date/time itself. Requirements Need to know where in the patient history to file/present this report. Comments If the diagnostic procedure was performed on the patient, this is the time it was performed. If there are specimens, the diagnostically relevant time can be derived from the specimen collection times, but the specimen information is not always available, and the exact relationship between the specimens and the diagnostically relevant time is not always automatic. Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a workflow:Event.occurrence[x] w5:FiveWs.done[x] v2:OBR-7 rim:effectiveTime
effectiveDateTime			dateTime	There are no (further) constraints on this element Data Type dateTime
effectivePeriod			Period	There are no (further) constraints on this element Data Type Period
issued	S Σ	0..1	instant	There are no (further) constraints on this element Element Id DiagnosticReport.issued Short description DateTime this version was made Alternate names Date published, Date Issued, Date Verified Definition The date and time that this version of the report was made available to providers, typically after the report was reviewed and verified. Requirements Clinicians need to be able to check the date that the report was released. Comments May be different from the update time of the resource itself, because that is the status of the record (potentially a secondary copy), not the actual release time of the report. Data Type instant Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a w5:FiveWs.recorded v2:OBR-22 rim:participation[typeCode=VRF or AUT].time
performer	Σ I	0..*	Reference(Data Standards Wales Practitioner Profile \| Data Standards Wales PractitionerRole Profile \| Data Standards Wales Organization Profile)	There are no (further) constraints on this element Element Id DiagnosticReport.performer Short description Responsible Diagnostic Service Alternate names Laboratory, Service, Practitioner, Department, Company, Authorized by, Director Definition The diagnostic service that is responsible for issuing the report. Requirements Need to know whom to contact if there are queries about the results. Also may need to track the source of reports for secondary data analysis. Comments This is not necessarily the source of the atomic data items or the entity that interpreted the results. It is the entity that takes responsibility for the clinical report. Data Type Reference(Data Standards Wales Practitioner Profile \| Data Standards Wales PractitionerRole Profile \| Data Standards Wales Organization Profile) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1:SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim:n/a rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity) workflow:Event.performer.actor w5:FiveWs.actor v2:PRT-8 (where this PRT-4-Participation = "PO") rim:.participation[typeCode=PRF]
reference	Σ I	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.performer.reference Short description Literal reference, Relative, internal or absolute URL Definition A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources. Comments Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
type	Σ	0..1	uriBinding	There are no (further) constraints on this element Element Id DiagnosticReport.performer.type Short description Type the reference refers to (e.g. "Patient") Definition The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent. The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources). Comments This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified. Data Type uri Binding Aa resource (or, for logical models, the URI of the logical model). ResourceType (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
identifier	Σ	0..1	Identifier	There are no (further) constraints on this element Element Id DiagnosticReport.performer.identifier Short description Logical reference, when literal reference is not known Definition An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference. Comments When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it. Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation\|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any). Data Type Identifier Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CX / EI (occasionally, more often EI maps to a resource id or a URL) rim:II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd:Identifier rim:.identifier
use	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element Id DiagnosticReport.performer.identifier.use Short description usual \| official \| temp \| secondary \| old (If known) Definition The purpose of this identifier. Requirements Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. Comments Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. Data Type code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:N/A rim:Role.code or implied by context
type	Σ	0..1	CodeableConceptBinding	There are no (further) constraints on this element Element Id DiagnosticReport.performer.identifier.type Short description Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. Requirements Allows users to make use of identifiers when the identifier system is not known. Comments This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. Data Type CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE rim:CD orim:fhir:CodeableConcept rdfs:subClassOf dt:CD v2:CX.5 rim:Role.code or implied by context
system	Σ	0..1	uri	There are no (further) constraints on this element Element Id DiagnosticReport.performer.identifier.system Short description The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique. Requirements There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. Comments Identifier.system is always case sensitive. Data Type uri Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General http://www.acme.com/identifiers/patient Mappings rim:n/a v2:CX.4 / EI-2-4 rim:II.root or Role.id.root servd:./IdentifierType
value	Σ	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.performer.identifier.value Short description The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system. Comments If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General 123456 Mappings rim:n/a v2:CX.1 / EI.1 rim:II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd:./Value
period	Σ I	0..1	Period	There are no (further) constraints on this element Element Id DiagnosticReport.performer.identifier.period Short description Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use. Comments A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration. Data Type Period Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` per-1:If present, start SHALL have a lower value than end `start.hasValue().not() or end.hasValue().not() or (start <= end)` Mappings rim:n/a v2:DR rim:IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"] v2:CX.7 + CX.8 rim:Role.effectiveTime or implied by context servd:./StartDate and ./EndDate
assigner	Σ I	0..1	Reference(UK Core Organization)	There are no (further) constraints on this element Element Id DiagnosticReport.performer.identifier.assigner Short description Organization that issued id (may be just text) Definition Organization that issued/manages the identifier. Comments The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. Data Type Reference(UK Core Organization) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1:SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim:n/a rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2:CX.4 / (CX.4,CX.9,CX.10) rim:II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd:./IdentifierIssuingAuthority
display	Σ	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.performer.display Short description Text alternative for the resource Definition Plain text narrative that identifies the resource in addition to the resource reference. Comments This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
resultsInterpreter	Σ I	0..*	Reference(Data Standards Wales Practitioner Profile \| Data Standards Wales PractitionerRole Profile \| Data Standards Wales Organization Profile)	There are no (further) constraints on this element Element Id DiagnosticReport.resultsInterpreter Short description Primary result interpreter Alternate names Analyzed by, Reported by Definition The practitioner or organization that is responsible for the report's conclusions and interpretations. Requirements Need to know whom to contact if there are queries about the results. Also may need to track the source of reports for secondary data analysis. Comments Might not be the same entity that takes responsibility for the clinical report. Data Type Reference(Data Standards Wales Practitioner Profile \| Data Standards Wales PractitionerRole Profile \| Data Standards Wales Organization Profile) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1:SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim:n/a rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity) workflow:Event.performer.actor w5:FiveWs.actor v2:OBR-32, PRT-8 (where this PRT-4-Participation = "PI") rim:.participation[typeCode=PRF]
reference	Σ I	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.resultsInterpreter.reference Short description Literal reference, Relative, internal or absolute URL Definition A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources. Comments Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
type	Σ	0..1	uriBinding	There are no (further) constraints on this element Element Id DiagnosticReport.resultsInterpreter.type Short description Type the reference refers to (e.g. "Patient") Definition The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent. The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources). Comments This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified. Data Type uri Binding Aa resource (or, for logical models, the URI of the logical model). ResourceType (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
identifier	Σ	0..1	Identifier	There are no (further) constraints on this element Element Id DiagnosticReport.resultsInterpreter.identifier Short description Logical reference, when literal reference is not known Definition An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference. Comments When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it. Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation\|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any). Data Type Identifier Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CX / EI (occasionally, more often EI maps to a resource id or a URL) rim:II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd:Identifier rim:.identifier
use	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element Id DiagnosticReport.resultsInterpreter.identifier.use Short description usual \| official \| temp \| secondary \| old (If known) Definition The purpose of this identifier. Requirements Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. Comments Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. Data Type code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:N/A rim:Role.code or implied by context
type	Σ	0..1	CodeableConceptBinding	There are no (further) constraints on this element Element Id DiagnosticReport.resultsInterpreter.identifier.type Short description Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. Requirements Allows users to make use of identifiers when the identifier system is not known. Comments This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. Data Type CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE rim:CD orim:fhir:CodeableConcept rdfs:subClassOf dt:CD v2:CX.5 rim:Role.code or implied by context
system	Σ	0..1	uri	There are no (further) constraints on this element Element Id DiagnosticReport.resultsInterpreter.identifier.system Short description The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique. Requirements There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. Comments Identifier.system is always case sensitive. Data Type uri Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General http://www.acme.com/identifiers/patient Mappings rim:n/a v2:CX.4 / EI-2-4 rim:II.root or Role.id.root servd:./IdentifierType
value	Σ	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.resultsInterpreter.identifier.value Short description The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system. Comments If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General 123456 Mappings rim:n/a v2:CX.1 / EI.1 rim:II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd:./Value
period	Σ I	0..1	Period	There are no (further) constraints on this element Element Id DiagnosticReport.resultsInterpreter.identifier.period Short description Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use. Comments A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration. Data Type Period Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` per-1:If present, start SHALL have a lower value than end `start.hasValue().not() or end.hasValue().not() or (start <= end)` Mappings rim:n/a v2:DR rim:IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"] v2:CX.7 + CX.8 rim:Role.effectiveTime or implied by context servd:./StartDate and ./EndDate
assigner	Σ I	0..1	Reference(UK Core Organization)	There are no (further) constraints on this element Element Id DiagnosticReport.resultsInterpreter.identifier.assigner Short description Organization that issued id (may be just text) Definition Organization that issued/manages the identifier. Comments The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. Data Type Reference(UK Core Organization) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1:SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim:n/a rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2:CX.4 / (CX.4,CX.9,CX.10) rim:II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd:./IdentifierIssuingAuthority
display	Σ	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.resultsInterpreter.display Short description Text alternative for the resource Definition Plain text narrative that identifies the resource in addition to the resource reference. Comments This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
specimen	S I	0..*	Reference(Data Standards Wales Specimen Profile)	There are no (further) constraints on this element Element Id DiagnosticReport.specimen Short description Specimens this report is based on Definition Details about the specimens on which this diagnostic report is based. Requirements Need to be able to report information about the collected specimens on which the report is based. Comments If the specimen is sufficiently specified with a code in the test result name, then this additional data may be redundant. If there are multiple specimens, these may be represented per observation or group. Data Type Reference(Data Standards Wales Specimen Profile) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1:SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim:n/a rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2:SPM rim:participation[typeCode=SBJ]
reference	Σ I	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.specimen.reference Short description Literal reference, Relative, internal or absolute URL Definition A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources. Comments Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
type	Σ	0..1	uriBinding	There are no (further) constraints on this element Element Id DiagnosticReport.specimen.type Short description Type the reference refers to (e.g. "Patient") Definition The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent. The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources). Comments This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified. Data Type uri Binding Aa resource (or, for logical models, the URI of the logical model). ResourceType (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
identifier	Σ	0..1	Identifier	There are no (further) constraints on this element Element Id DiagnosticReport.specimen.identifier Short description Logical reference, when literal reference is not known Definition An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference. Comments When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it. Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation\|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any). Data Type Identifier Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CX / EI (occasionally, more often EI maps to a resource id or a URL) rim:II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd:Identifier rim:.identifier
use	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element Id DiagnosticReport.specimen.identifier.use Short description usual \| official \| temp \| secondary \| old (If known) Definition The purpose of this identifier. Requirements Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. Comments Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. Data Type code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:N/A rim:Role.code or implied by context
type	Σ	0..1	CodeableConceptBinding	There are no (further) constraints on this element Element Id DiagnosticReport.specimen.identifier.type Short description Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. Requirements Allows users to make use of identifiers when the identifier system is not known. Comments This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. Data Type CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE rim:CD orim:fhir:CodeableConcept rdfs:subClassOf dt:CD v2:CX.5 rim:Role.code or implied by context
system	Σ	0..1	uri	There are no (further) constraints on this element Element Id DiagnosticReport.specimen.identifier.system Short description The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique. Requirements There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. Comments Identifier.system is always case sensitive. Data Type uri Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General http://www.acme.com/identifiers/patient Mappings rim:n/a v2:CX.4 / EI-2-4 rim:II.root or Role.id.root servd:./IdentifierType
value	Σ	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.specimen.identifier.value Short description The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system. Comments If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General 123456 Mappings rim:n/a v2:CX.1 / EI.1 rim:II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd:./Value
period	Σ I	0..1	Period	There are no (further) constraints on this element Element Id DiagnosticReport.specimen.identifier.period Short description Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use. Comments A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration. Data Type Period Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` per-1:If present, start SHALL have a lower value than end `start.hasValue().not() or end.hasValue().not() or (start <= end)` Mappings rim:n/a v2:DR rim:IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"] v2:CX.7 + CX.8 rim:Role.effectiveTime or implied by context servd:./StartDate and ./EndDate
assigner	Σ I	0..1	Reference(UK Core Organization)	There are no (further) constraints on this element Element Id DiagnosticReport.specimen.identifier.assigner Short description Organization that issued id (may be just text) Definition Organization that issued/manages the identifier. Comments The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. Data Type Reference(UK Core Organization) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1:SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim:n/a rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2:CX.4 / (CX.4,CX.9,CX.10) rim:II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd:./IdentifierIssuingAuthority
display	Σ	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.specimen.display Short description Text alternative for the resource Definition Plain text narrative that identifies the resource in addition to the resource reference. Comments This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
result	S I	1..1	Reference(Data Standards Wales Observation Profile)	There are no (further) constraints on this element Element Id DiagnosticReport.result Short description Observations Alternate names Data, Atomic Value, Result, Atomic result, Data, Test, Analyte, Battery, Organizer Definition Observations that are part of this diagnostic report. Requirements Need to support individual results, or groups of results, where the result grouping is arbitrary, but meaningful. Comments Observations can contain observations. Data Type Reference(Data Standards Wales Observation Profile) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1:SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim:n/a rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2:OBXs rim:outboundRelationship[typeCode=COMP].target
reference	Σ I	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.result.reference Short description Literal reference, Relative, internal or absolute URL Definition A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources. Comments Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
type	Σ	0..1	uriBinding	There are no (further) constraints on this element Element Id DiagnosticReport.result.type Short description Type the reference refers to (e.g. "Patient") Definition The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent. The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources). Comments This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified. Data Type uri Binding Aa resource (or, for logical models, the URI of the logical model). ResourceType (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
identifier	Σ	0..1	Identifier	There are no (further) constraints on this element Element Id DiagnosticReport.result.identifier Short description Logical reference, when literal reference is not known Definition An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference. Comments When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it. Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation\|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any). Data Type Identifier Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CX / EI (occasionally, more often EI maps to a resource id or a URL) rim:II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd:Identifier rim:.identifier
use	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element Id DiagnosticReport.result.identifier.use Short description usual \| official \| temp \| secondary \| old (If known) Definition The purpose of this identifier. Requirements Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. Comments Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. Data Type code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:N/A rim:Role.code or implied by context
type	Σ	0..1	CodeableConceptBinding	There are no (further) constraints on this element Element Id DiagnosticReport.result.identifier.type Short description Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. Requirements Allows users to make use of identifiers when the identifier system is not known. Comments This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. Data Type CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE rim:CD orim:fhir:CodeableConcept rdfs:subClassOf dt:CD v2:CX.5 rim:Role.code or implied by context
system	Σ	0..1	uri	There are no (further) constraints on this element Element Id DiagnosticReport.result.identifier.system Short description The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique. Requirements There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. Comments Identifier.system is always case sensitive. Data Type uri Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General http://www.acme.com/identifiers/patient Mappings rim:n/a v2:CX.4 / EI-2-4 rim:II.root or Role.id.root servd:./IdentifierType
value	Σ	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.result.identifier.value Short description The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system. Comments If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General 123456 Mappings rim:n/a v2:CX.1 / EI.1 rim:II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd:./Value
period	Σ I	0..1	Period	There are no (further) constraints on this element Element Id DiagnosticReport.result.identifier.period Short description Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use. Comments A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration. Data Type Period Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` per-1:If present, start SHALL have a lower value than end `start.hasValue().not() or end.hasValue().not() or (start <= end)` Mappings rim:n/a v2:DR rim:IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"] v2:CX.7 + CX.8 rim:Role.effectiveTime or implied by context servd:./StartDate and ./EndDate
assigner	Σ I	0..1	Reference(UK Core Organization)	There are no (further) constraints on this element Element Id DiagnosticReport.result.identifier.assigner Short description Organization that issued id (may be just text) Definition Organization that issued/manages the identifier. Comments The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. Data Type Reference(UK Core Organization) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1:SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim:n/a rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2:CX.4 / (CX.4,CX.9,CX.10) rim:II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd:./IdentifierIssuingAuthority
display	Σ	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.result.display Short description Text alternative for the resource Definition Plain text narrative that identifies the resource in addition to the resource reference. Comments This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
imagingStudy	S I	0..*	Reference(Data Standards Wales ImagingStudy Profile)	There are no (further) constraints on this element Element Id DiagnosticReport.imagingStudy Short description Reference to full details of imaging associated with the diagnostic report Definition One or more links to full details of any imaging performed during the diagnostic investigation. Typically, this is imaging performed by DICOM enabled modalities, but this is not required. A fully enabled PACS viewer can use this information to provide views of the source images. Comments ImagingStudy and the image element are somewhat overlapping - typically, the list of image references in the image element will also be found in one of the imaging study resources. However, each caters to different types of displays for different types of purposes. Neither, either, or both may be provided. Data Type Reference(Data Standards Wales ImagingStudy Profile) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1:SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim:n/a rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity) rim:outboundRelationship[typeCode=COMP].target[classsCode=DGIMG, moodCode=EVN]
reference	Σ I	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.imagingStudy.reference Short description Literal reference, Relative, internal or absolute URL Definition A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources. Comments Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
type	Σ	0..1	uriBinding	There are no (further) constraints on this element Element Id DiagnosticReport.imagingStudy.type Short description Type the reference refers to (e.g. "Patient") Definition The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent. The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources). Comments This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified. Data Type uri Binding Aa resource (or, for logical models, the URI of the logical model). ResourceType (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
identifier	Σ	0..1	Identifier	There are no (further) constraints on this element Element Id DiagnosticReport.imagingStudy.identifier Short description Logical reference, when literal reference is not known Definition An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference. Comments When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it. Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation\|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any). Data Type Identifier Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CX / EI (occasionally, more often EI maps to a resource id or a URL) rim:II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd:Identifier rim:.identifier
use	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element Id DiagnosticReport.imagingStudy.identifier.use Short description usual \| official \| temp \| secondary \| old (If known) Definition The purpose of this identifier. Requirements Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. Comments Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. Data Type code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:N/A rim:Role.code or implied by context
type	Σ	0..1	CodeableConceptBinding	There are no (further) constraints on this element Element Id DiagnosticReport.imagingStudy.identifier.type Short description Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. Requirements Allows users to make use of identifiers when the identifier system is not known. Comments This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. Data Type CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE rim:CD orim:fhir:CodeableConcept rdfs:subClassOf dt:CD v2:CX.5 rim:Role.code or implied by context
system	Σ	0..1	uri	There are no (further) constraints on this element Element Id DiagnosticReport.imagingStudy.identifier.system Short description The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique. Requirements There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. Comments Identifier.system is always case sensitive. Data Type uri Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General http://www.acme.com/identifiers/patient Mappings rim:n/a v2:CX.4 / EI-2-4 rim:II.root or Role.id.root servd:./IdentifierType
value	Σ	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.imagingStudy.identifier.value Short description The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system. Comments If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General 123456 Mappings rim:n/a v2:CX.1 / EI.1 rim:II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd:./Value
period	Σ I	0..1	Period	There are no (further) constraints on this element Element Id DiagnosticReport.imagingStudy.identifier.period Short description Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use. Comments A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration. Data Type Period Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` per-1:If present, start SHALL have a lower value than end `start.hasValue().not() or end.hasValue().not() or (start <= end)` Mappings rim:n/a v2:DR rim:IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"] v2:CX.7 + CX.8 rim:Role.effectiveTime or implied by context servd:./StartDate and ./EndDate
assigner	Σ I	0..1	Reference(UK Core Organization)	There are no (further) constraints on this element Element Id DiagnosticReport.imagingStudy.identifier.assigner Short description Organization that issued id (may be just text) Definition Organization that issued/manages the identifier. Comments The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. Data Type Reference(UK Core Organization) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1:SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim:n/a rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2:CX.4 / (CX.4,CX.9,CX.10) rim:II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd:./IdentifierIssuingAuthority
display	Σ	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.imagingStudy.display Short description Text alternative for the resource Definition Plain text narrative that identifies the resource in addition to the resource reference. Comments This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
media	Σ	0..*	BackboneElement	There are no (further) constraints on this element Element Id DiagnosticReport.media Short description Key images associated with this report Alternate names DICOM, Slides, Scans Definition A list of key images associated with this report. The images are generally created during the diagnostic process, and may be directly of the patient, or of treated specimens (i.e. slides of interest). Requirements Many diagnostic services include images in the report as part of their service. Data Type BackboneElement Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:OBX? rim:outboundRelationship[typeCode=COMP].target
comment		0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.media.comment Short description Comment about the image (e.g. explanation) Definition A comment about the image. Typically, this is used to provide an explanation for why the image is included, or to draw the viewer's attention to important features. Requirements The provider of the report should make a comment about each image included in the report. Comments The comment should be displayed with the image. It would be common for the report to include additional discussion of the image contents in other sections such as the conclusion. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:.inboundRelationship[typeCode=COMP].source[classCode=OBS, moodCode=EVN, code="annotation"].value
link	Σ I	1..1	Reference(Media)	There are no (further) constraints on this element Element Id DiagnosticReport.media.link Short description Reference to the image source Definition Reference to the image source. Comments References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository. Data Type Reference(Media) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1:SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim:n/a rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity) rim:.value.reference
reference	Σ I	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.media.link.reference Short description Literal reference, Relative, internal or absolute URL Definition A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources. Comments Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
type	Σ	0..1	uriBinding	There are no (further) constraints on this element Element Id DiagnosticReport.media.link.type Short description Type the reference refers to (e.g. "Patient") Definition The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent. The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources). Comments This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified. Data Type uri Binding Aa resource (or, for logical models, the URI of the logical model). ResourceType (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
identifier	Σ	0..1	Identifier	There are no (further) constraints on this element Element Id DiagnosticReport.media.link.identifier Short description Logical reference, when literal reference is not known Definition An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference. Comments When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it. Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation\|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any). Data Type Identifier Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CX / EI (occasionally, more often EI maps to a resource id or a URL) rim:II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd:Identifier rim:.identifier
use	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element Id DiagnosticReport.media.link.identifier.use Short description usual \| official \| temp \| secondary \| old (If known) Definition The purpose of this identifier. Requirements Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. Comments Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. Data Type code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:N/A rim:Role.code or implied by context
type	Σ	0..1	CodeableConceptBinding	There are no (further) constraints on this element Element Id DiagnosticReport.media.link.identifier.type Short description Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. Requirements Allows users to make use of identifiers when the identifier system is not known. Comments This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. Data Type CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE rim:CD orim:fhir:CodeableConcept rdfs:subClassOf dt:CD v2:CX.5 rim:Role.code or implied by context
system	Σ	0..1	uri	There are no (further) constraints on this element Element Id DiagnosticReport.media.link.identifier.system Short description The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique. Requirements There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. Comments Identifier.system is always case sensitive. Data Type uri Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General http://www.acme.com/identifiers/patient Mappings rim:n/a v2:CX.4 / EI-2-4 rim:II.root or Role.id.root servd:./IdentifierType
value	Σ	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.media.link.identifier.value Short description The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system. Comments If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General 123456 Mappings rim:n/a v2:CX.1 / EI.1 rim:II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd:./Value
period	Σ I	0..1	Period	There are no (further) constraints on this element Element Id DiagnosticReport.media.link.identifier.period Short description Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use. Comments A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration. Data Type Period Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` per-1:If present, start SHALL have a lower value than end `start.hasValue().not() or end.hasValue().not() or (start <= end)` Mappings rim:n/a v2:DR rim:IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"] v2:CX.7 + CX.8 rim:Role.effectiveTime or implied by context servd:./StartDate and ./EndDate
assigner	Σ I	0..1	Reference(UK Core Organization)	There are no (further) constraints on this element Element Id DiagnosticReport.media.link.identifier.assigner Short description Organization that issued id (may be just text) Definition Organization that issued/manages the identifier. Comments The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. Data Type Reference(UK Core Organization) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1:SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim:n/a rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2:CX.4 / (CX.4,CX.9,CX.10) rim:II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd:./IdentifierIssuingAuthority
display	Σ	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.media.link.display Short description Text alternative for the resource Definition Plain text narrative that identifies the resource in addition to the resource reference. Comments This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
conclusion		0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.conclusion Short description Clinical conclusion (interpretation) of test results Alternate names Report Definition Concise and clinically contextualized summary conclusion (interpretation/impression) of the diagnostic report. Requirements Need to be able to provide a conclusion that is not lost among the basic result data. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:OBX rim:inboundRelationship[typeCode="SPRT"].source[classCode=OBS, moodCode=EVN, code=LOINC:48767-8].value (type=ST)
conclusionCode		0..*	CodeableConcept	There are no (further) constraints on this element Element Id DiagnosticReport.conclusionCode Short description Codes for the clinical conclusion of test results Definition One or more codes that represent the summary conclusion (interpretation/impression) of the diagnostic report. Comments Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination. Data Type CodeableConcept Binding Diagnosis codes provided as adjuncts to the report. SNOMEDCTClinicalFindings (example) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE rim:CD orim:fhir:CodeableConcept rdfs:subClassOf dt:CD v2:OBX rim:inboundRelationship[typeCode=SPRT].source[classCode=OBS, moodCode=EVN, code=LOINC:54531-9].value (type=CD)
coding	Σ	0..*	Coding	There are no (further) constraints on this element Element Id DiagnosticReport.conclusionCode.coding Short description Code defined by a terminology system Definition A reference to a code defined by a terminology system. Requirements Allows for alternative encodings within a code system, and translations to other code systems. Comments Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. Data Type Coding Sliced: Unordered, Open, by system(Value) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim:CV orim:fhir:Coding rdfs:subClassOf dt:CDCoding v2:CE.1-8, CE.10-22 rim:union(., ./translation) orim:fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
snomedCT	Σ	0..*	CodingBinding	There are no (further) constraints on this element Element Id DiagnosticReport.conclusionCode.coding:snomedCT Short description Code defined by a terminology system Definition A reference to a code defined by a terminology system. Requirements Allows for alternative encodings within a code system, and translations to other code systems. Comments Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. Data Type Coding Binding A code from the SNOMED UK Clinical Terminology coding system UKCoreFindingCode (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim:CV orim:fhir:Coding rdfs:subClassOf dt:CDCoding v2:CE.1-8, CE.10-22 rim:union(., ./translation) orim:fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
system	Σ	1..1	uriFixed Value	There are no (further) constraints on this element Element Id DiagnosticReport.conclusionCode.coding:snomedCT.system Short description Identity of the terminology system Definition The identification of the code system that defines the meaning of the symbol in the code. Requirements Need to be unambiguous about the source of the definition of the symbol. Comments The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously. Data Type uri Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Fixed Value http://snomed.info/sct Mappings rim:n/a v2:CE.3 rim:./codeSystem orim:*fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem
version	Σ	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.conclusionCode.coding:snomedCT.version Short description Version of the system - if relevant Definition The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged. Comments Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE.7 rim:./codeSystemVersion orim:*fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion
code	Σ	1..1	code	There are no (further) constraints on this element Element Id DiagnosticReport.conclusionCode.coding:snomedCT.code Short description Symbol in syntax defined by the system Definition A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination). Requirements Need to refer to a particular code in the system. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data Type code Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE.1 rim:./code orim:*fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code
display	Σ	1..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.conclusionCode.coding:snomedCT.display Short description Representation defined by the system Definition A representation of the meaning of the code in the system, following the rules of the system. Requirements Need to be able to carry a human-readable meaning of the code for readers that do not know the system. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE.2 - but note this is not well followed rim:CV.displayName orim:*fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName
userSelected	Σ	0..1	boolean	There are no (further) constraints on this element Element Id DiagnosticReport.conclusionCode.coding:snomedCT.userSelected Short description If this coding was chosen directly by the user Definition Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays). Requirements This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing. Comments Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely. Data Type boolean Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:Sometimes implied by being first rim:CD.codingRationale orim:fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]
text	Σ	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.conclusionCode.text Short description Plain text representation of the concept Definition A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user. Requirements The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source. Comments Very often the text is the same as a displayName of one of the codings. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE.9. But note many systems use CE.2 for this rim:./originalText[mediaType/code="text/plain"]/data orim:fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText
presentedForm	S I	0..*	Attachment	There are no (further) constraints on this element Element Id DiagnosticReport.presentedForm Short description Entire report as issued Definition Rich text representation of the entire result as issued by the diagnostic service. Multiple formats are allowed but they SHALL be semantically equivalent. Requirements Gives laboratory the ability to provide its own fully formatted report for clinical fidelity. Comments "application/pdf" is recommended as the most reliable and interoperable in this context. Data Type Attachment Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` att-1:If the Attachment has data, it SHALL have a contentType `data.empty() or contentType.exists()` Mappings rim:n/a v2:ED/RP rim:ED v2:OBX rim:text (type=ED)

DiagnosticReport	I		DiagnosticReport	There are no (further) constraints on this element Element Id DiagnosticReport Short description A Diagnostic report - a combination of request information, atomic results, images, interpretation, as well as formatted reports Alternate names Report, Test, Result, Results, Labs, Laboratory Definition The findings and interpretation of diagnostic tests performed on patients, groups of patients, devices, and locations, and/or specimens derived from these. The report includes clinical context such as requesting and provider information, and some mix of atomic results, images, textual and coded interpretations, and formatted representation of diagnostic reports. Comments This is intended to capture a single report and is not suitable for use in displaying summary information that covers multiple reports. For example, this resource has not been designed for laboratory cumulative reporting formats nor detailed structured reports for sequencing. Data Type DiagnosticReport Constraints dom-2:If the resource is contained in another resource, it SHALL NOT contain nested Resources `contained.contained.empty()` dom-4:If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated `contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()` dom-3:If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource `contained.where((('#'+id in (%resource.descendants().reference \| %resource.descendants().as(canonical) \| %resource.descendants().as(uri) \| %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty()` dom-6:A resource should have narrative for robust management text.`div`.exists() dom-5:If a resource is contained in another resource, it SHALL NOT have a security label `contained.meta.security.empty()` Mappings rim:Entity. Role, or Act workflow:Event v2:ORU -> OBR rim:Observation[classCode=OBS, moodCode=EVN]
identifier	S Σ	0..*	Identifier	There are no (further) constraints on this element Element Id DiagnosticReport.identifier Short description Business identifier for report Alternate names ReportID, Filler ID, Placer ID Definition Identifiers assigned to this report by the performer or other systems. Requirements Need to know what identifier to use when making queries about this report from the source laboratory, and for linking to the report outside FHIR context. Comments Usually assigned by the Information System of the diagnostic service provider (filler id). Data Type Identifier Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CX / EI (occasionally, more often EI maps to a resource id or a URL) rim:II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd:Identifier workflow:Event.identifier w5:FiveWs.identifier v2:OBR-51/ for globally unique filler ID - OBR-3 , For non-globally unique filler-id the flller/placer number must be combined with the universal service Id - OBR-2(if present)+OBR-3+OBR-4 rim:id
use	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element Id DiagnosticReport.identifier.use Short description usual \| official \| temp \| secondary \| old (If known) Definition The purpose of this identifier. Requirements Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. Comments Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. Data Type code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:N/A rim:Role.code or implied by context
type	Σ	0..1	CodeableConceptBinding	There are no (further) constraints on this element Element Id DiagnosticReport.identifier.type Short description Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. Requirements Allows users to make use of identifiers when the identifier system is not known. Comments This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. Data Type CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE rim:CD orim:fhir:CodeableConcept rdfs:subClassOf dt:CD v2:CX.5 rim:Role.code or implied by context
system	Σ	0..1	uri	There are no (further) constraints on this element Element Id DiagnosticReport.identifier.system Short description The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique. Requirements There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. Comments Identifier.system is always case sensitive. Data Type uri Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General http://www.acme.com/identifiers/patient Mappings rim:n/a v2:CX.4 / EI-2-4 rim:II.root or Role.id.root servd:./IdentifierType
value	Σ	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.identifier.value Short description The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system. Comments If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General 123456 Mappings rim:n/a v2:CX.1 / EI.1 rim:II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd:./Value
period	Σ I	0..1	Period	There are no (further) constraints on this element Element Id DiagnosticReport.identifier.period Short description Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use. Comments A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration. Data Type Period Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` per-1:If present, start SHALL have a lower value than end `start.hasValue().not() or end.hasValue().not() or (start <= end)` Mappings rim:n/a v2:DR rim:IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"] v2:CX.7 + CX.8 rim:Role.effectiveTime or implied by context servd:./StartDate and ./EndDate
assigner	Σ I	0..1	Reference(UK Core Organization)	There are no (further) constraints on this element Element Id DiagnosticReport.identifier.assigner Short description Organization that issued id (may be just text) Definition Organization that issued/manages the identifier. Comments The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. Data Type Reference(UK Core Organization) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1:SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim:n/a rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2:CX.4 / (CX.4,CX.9,CX.10) rim:II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd:./IdentifierIssuingAuthority
basedOn	I	0..*	Reference(ImmunizationRecommendation \| NutritionOrder \| UK Core CarePlan \| UK Core MedicationRequest \| Data Standards Wales ServiceRequest Profile)	There are no (further) constraints on this element Element Id DiagnosticReport.basedOn Short description What was requested Alternate names Request Definition Details concerning a service requested. Requirements This allows tracing of authorization for the report and tracking whether proposals/recommendations were acted upon. Comments Note: Usually there is one test request for each result, however in some circumstances multiple test requests may be represented using a single test result resource. Note that there are also cases where one request leads to multiple reports. Data Type Reference(ImmunizationRecommendation \| NutritionOrder \| UK Core CarePlan \| UK Core MedicationRequest \| Data Standards Wales ServiceRequest Profile) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1:SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim:n/a rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity) workflow:Event.basedOn v2:ORC? OBR-2/3? rim:outboundRelationship[typeCode=FLFS].target
reference	Σ I	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.basedOn.reference Short description Literal reference, Relative, internal or absolute URL Definition A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources. Comments Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
type	Σ	0..1	uriBinding	There are no (further) constraints on this element Element Id DiagnosticReport.basedOn.type Short description Type the reference refers to (e.g. "Patient") Definition The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent. The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources). Comments This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified. Data Type uri Binding Aa resource (or, for logical models, the URI of the logical model). ResourceType (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
identifier	Σ	0..1	Identifier	There are no (further) constraints on this element Element Id DiagnosticReport.basedOn.identifier Short description Logical reference, when literal reference is not known Definition An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference. Comments When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it. Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation\|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any). Data Type Identifier Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CX / EI (occasionally, more often EI maps to a resource id or a URL) rim:II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd:Identifier rim:.identifier
use	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element Id DiagnosticReport.basedOn.identifier.use Short description usual \| official \| temp \| secondary \| old (If known) Definition The purpose of this identifier. Requirements Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. Comments Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. Data Type code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:N/A rim:Role.code or implied by context
type	Σ	0..1	CodeableConceptBinding	There are no (further) constraints on this element Element Id DiagnosticReport.basedOn.identifier.type Short description Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. Requirements Allows users to make use of identifiers when the identifier system is not known. Comments This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. Data Type CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE rim:CD orim:fhir:CodeableConcept rdfs:subClassOf dt:CD v2:CX.5 rim:Role.code or implied by context
system	Σ	0..1	uri	There are no (further) constraints on this element Element Id DiagnosticReport.basedOn.identifier.system Short description The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique. Requirements There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. Comments Identifier.system is always case sensitive. Data Type uri Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General http://www.acme.com/identifiers/patient Mappings rim:n/a v2:CX.4 / EI-2-4 rim:II.root or Role.id.root servd:./IdentifierType
value	Σ	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.basedOn.identifier.value Short description The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system. Comments If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General 123456 Mappings rim:n/a v2:CX.1 / EI.1 rim:II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd:./Value
period	Σ I	0..1	Period	There are no (further) constraints on this element Element Id DiagnosticReport.basedOn.identifier.period Short description Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use. Comments A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration. Data Type Period Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` per-1:If present, start SHALL have a lower value than end `start.hasValue().not() or end.hasValue().not() or (start <= end)` Mappings rim:n/a v2:DR rim:IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"] v2:CX.7 + CX.8 rim:Role.effectiveTime or implied by context servd:./StartDate and ./EndDate
assigner	Σ I	0..1	Reference(UK Core Organization)	There are no (further) constraints on this element Element Id DiagnosticReport.basedOn.identifier.assigner Short description Organization that issued id (may be just text) Definition Organization that issued/manages the identifier. Comments The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. Data Type Reference(UK Core Organization) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1:SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim:n/a rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2:CX.4 / (CX.4,CX.9,CX.10) rim:II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd:./IdentifierIssuingAuthority
display	Σ	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.basedOn.display Short description Text alternative for the resource Definition Plain text narrative that identifies the resource in addition to the resource reference. Comments This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
status	S Σ ?!	1..1	codeBinding	There are no (further) constraints on this element Element Id DiagnosticReport.status Short description registered \| partial \| preliminary \| final + Definition The status of the diagnostic report. Requirements Diagnostic services routinely issue provisional/incomplete reports, and sometimes withdraw previously released reports. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data Type code Binding The status of the diagnostic report. DiagnosticReportStatus (required) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a workflow:Event.status w5:FiveWs.status v2:OBR-25 (not 1:1 mapping) rim:statusCode Note: final and amended are distinguished by whether observation is the subject of a ControlAct event of type "revise"
category	S Σ	1..*	CodeableConcept	Element Id DiagnosticReport.category Short description Service category Alternate names Department, Sub-department, Service, Discipline Definition A code that classifies the clinical discipline, department or diagnostic service that created the report (e.g. cardiology, biochemistry, hematology, MRI). This is used for searching, sorting and display purposes. Comments Multiple categories are allowed using various categorization schemes. The level of granularity is defined by the category concepts in the value set. More fine-grained filtering can be performed using the metadata and/or terminology hierarchy in DiagnosticReport.code. Data Type CodeableConcept Sliced: Unordered, Open, by $this(Pattern) Binding Codes for diagnostic service sections. DiagnosticServiceSectionCodes (example) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE rim:CD orim:fhir:CodeableConcept rdfs:subClassOf dt:CD w5:FiveWs.class v2:OBR-24 rim:inboundRelationship[typeCode=COMP].source[classCode=LIST, moodCode=EVN, code < LabService].code
(All Slices)				There are no (further) constraints on this element
coding	Σ	0..*	Coding	There are no (further) constraints on this element Element Id DiagnosticReport.category.coding Short description Code defined by a terminology system Definition A reference to a code defined by a terminology system. Requirements Allows for alternative encodings within a code system, and translations to other code systems. Comments Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. Data Type Coding Sliced: Unordered, Open, by system(Value) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim:CV orim:fhir:Coding rdfs:subClassOf dt:CDCoding v2:CE.1-8, CE.10-22 rim:union(., ./translation) orim:fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
snomedCT	Σ	0..*	Coding	There are no (further) constraints on this element Element Id DiagnosticReport.category.coding:snomedCT Short description Code defined by a terminology system Definition A reference to a code defined by a terminology system. Requirements Allows for alternative encodings within a code system, and translations to other code systems. Comments Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. Data Type Coding Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim:CV orim:fhir:Coding rdfs:subClassOf dt:CDCoding v2:CE.1-8, CE.10-22 rim:union(., ./translation) orim:fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
system	Σ	1..1	uriFixed Value	There are no (further) constraints on this element Element Id DiagnosticReport.category.coding:snomedCT.system Short description Identity of the terminology system Definition The identification of the code system that defines the meaning of the symbol in the code. Requirements Need to be unambiguous about the source of the definition of the symbol. Comments The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously. Data Type uri Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Fixed Value http://snomed.info/sct Mappings rim:n/a v2:CE.3 rim:./codeSystem orim:*fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem
version	Σ	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.category.coding:snomedCT.version Short description Version of the system - if relevant Definition The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged. Comments Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE.7 rim:./codeSystemVersion orim:*fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion
code	Σ	1..1	code	There are no (further) constraints on this element Element Id DiagnosticReport.category.coding:snomedCT.code Short description Symbol in syntax defined by the system Definition A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination). Requirements Need to refer to a particular code in the system. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data Type code Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE.1 rim:./code orim:*fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code
display	Σ	1..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.category.coding:snomedCT.display Short description Representation defined by the system Definition A representation of the meaning of the code in the system, following the rules of the system. Requirements Need to be able to carry a human-readable meaning of the code for readers that do not know the system. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE.2 - but note this is not well followed rim:CV.displayName orim:*fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName
userSelected	Σ	0..1	boolean	There are no (further) constraints on this element Element Id DiagnosticReport.category.coding:snomedCT.userSelected Short description If this coding was chosen directly by the user Definition Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays). Requirements This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing. Comments Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely. Data Type boolean Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:Sometimes implied by being first rim:CD.codingRationale orim:fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]
text	Σ	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.category.text Short description Plain text representation of the concept Definition A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user. Requirements The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source. Comments Very often the text is the same as a displayName of one of the codings. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE.9. But note many systems use CE.2 for this rim:./originalText[mediaType/code="text/plain"]/data orim:fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText
LaboratorySlice	S Σ	1..1	CodeableConceptFixed Value	Element Id DiagnosticReport.category:LaboratorySlice Short description Service category Alternate names Department, Sub-department, Service, Discipline Definition A code that classifies the clinical discipline, department or diagnostic service that created the report (e.g. cardiology, biochemistry, hematology, MRI). This is used for searching, sorting and display purposes. Comments Multiple categories are allowed using various categorization schemes. The level of granularity is defined by the category concepts in the value set. More fine-grained filtering can be performed using the metadata and/or terminology hierarchy in DiagnosticReport.code. Data Type CodeableConcept Binding Codes for diagnostic service sections. DiagnosticServiceSectionCodes (example) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Fixed Value { "coding": [ { "system": "http://terminology.hl7.org/CodeSystem/v2-0074", "version": "2.5.0", "code": "LAB", "display": "Laboratory" } ] } Mappings rim:n/a v2:CE/CNE/CWE rim:CD orim:fhir:CodeableConcept rdfs:subClassOf dt:CD w5:FiveWs.class v2:OBR-24 rim:inboundRelationship[typeCode=COMP].source[classCode=LIST, moodCode=EVN, code < LabService].code
coding	Σ	0..*	Coding	There are no (further) constraints on this element Element Id DiagnosticReport.category:LaboratorySlice.coding Short description Code defined by a terminology system Definition A reference to a code defined by a terminology system. Requirements Allows for alternative encodings within a code system, and translations to other code systems. Comments Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. Data Type Coding Sliced: Unordered, Open, by system(Value) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim:CV orim:fhir:Coding rdfs:subClassOf dt:CDCoding v2:CE.1-8, CE.10-22 rim:union(., ./translation) orim:fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
snomedCT	Σ	0..*	Coding	There are no (further) constraints on this element Element Id DiagnosticReport.category:LaboratorySlice.coding:snomedCT Short description Code defined by a terminology system Definition A reference to a code defined by a terminology system. Requirements Allows for alternative encodings within a code system, and translations to other code systems. Comments Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. Data Type Coding Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim:CV orim:fhir:Coding rdfs:subClassOf dt:CDCoding v2:CE.1-8, CE.10-22 rim:union(., ./translation) orim:fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
system	Σ	1..1	uriFixed Value	There are no (further) constraints on this element Element Id DiagnosticReport.category:LaboratorySlice.coding:snomedCT.system Short description Identity of the terminology system Definition The identification of the code system that defines the meaning of the symbol in the code. Requirements Need to be unambiguous about the source of the definition of the symbol. Comments The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously. Data Type uri Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Fixed Value http://snomed.info/sct Mappings rim:n/a v2:CE.3 rim:./codeSystem orim:*fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem
version	Σ	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.category:LaboratorySlice.coding:snomedCT.version Short description Version of the system - if relevant Definition The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged. Comments Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE.7 rim:./codeSystemVersion orim:*fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion
code	Σ	1..1	code	There are no (further) constraints on this element Element Id DiagnosticReport.category:LaboratorySlice.coding:snomedCT.code Short description Symbol in syntax defined by the system Definition A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination). Requirements Need to refer to a particular code in the system. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data Type code Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE.1 rim:./code orim:*fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code
display	Σ	1..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.category:LaboratorySlice.coding:snomedCT.display Short description Representation defined by the system Definition A representation of the meaning of the code in the system, following the rules of the system. Requirements Need to be able to carry a human-readable meaning of the code for readers that do not know the system. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE.2 - but note this is not well followed rim:CV.displayName orim:*fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName
userSelected	Σ	0..1	boolean	There are no (further) constraints on this element Element Id DiagnosticReport.category:LaboratorySlice.coding:snomedCT.userSelected Short description If this coding was chosen directly by the user Definition Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays). Requirements This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing. Comments Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely. Data Type boolean Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:Sometimes implied by being first rim:CD.codingRationale orim:fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]
text	Σ	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.category:LaboratorySlice.text Short description Plain text representation of the concept Definition A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user. Requirements The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source. Comments Very often the text is the same as a displayName of one of the codings. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE.9. But note many systems use CE.2 for this rim:./originalText[mediaType/code="text/plain"]/data orim:fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText
code	S Σ	1..1	CodeableConceptBinding	There are no (further) constraints on this element Element Id DiagnosticReport.code Short description Name/Code for this diagnostic report Alternate names Type Definition A code or name that describes this diagnostic report. Comments Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination. Data Type CodeableConcept Binding Codes that describe Diagnostic Reports. LOINCDiagnosticReportCodes (preferred) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE rim:CD orim:fhir:CodeableConcept rdfs:subClassOf dt:CD workflow:Event.code w5:FiveWs.what[x] v2:OBR-4 (HL7 v2 doesn't provide an easy way to indicate both the ordered test and the performed panel) rim:code
coding	Σ	0..*	Coding	There are no (further) constraints on this element Element Id DiagnosticReport.code.coding Short description Code defined by a terminology system Definition A reference to a code defined by a terminology system. Requirements Allows for alternative encodings within a code system, and translations to other code systems. Comments Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. Data Type Coding Sliced: Unordered, Open, by system(Value) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim:CV orim:fhir:Coding rdfs:subClassOf dt:CDCoding v2:CE.1-8, CE.10-22 rim:union(., ./translation) orim:fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
snomedCT	Σ	0..*	CodingBinding	There are no (further) constraints on this element Element Id DiagnosticReport.code.coding:snomedCT Short description Code defined by a terminology system Definition A reference to a code defined by a terminology system. Requirements Allows for alternative encodings within a code system, and translations to other code systems. Comments Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. Data Type Coding Binding A code from the SNOMED UK Clinical Terminology coding system UKCoreReportCodeSnCT (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim:CV orim:fhir:Coding rdfs:subClassOf dt:CDCoding v2:CE.1-8, CE.10-22 rim:union(., ./translation) orim:fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
system	Σ	1..1	uriFixed Value	There are no (further) constraints on this element Element Id DiagnosticReport.code.coding:snomedCT.system Short description Identity of the terminology system Definition The identification of the code system that defines the meaning of the symbol in the code. Requirements Need to be unambiguous about the source of the definition of the symbol. Comments The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously. Data Type uri Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Fixed Value http://snomed.info/sct Mappings rim:n/a v2:CE.3 rim:./codeSystem orim:*fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem
version	Σ	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.code.coding:snomedCT.version Short description Version of the system - if relevant Definition The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged. Comments Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE.7 rim:./codeSystemVersion orim:*fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion
code	Σ	1..1	code	There are no (further) constraints on this element Element Id DiagnosticReport.code.coding:snomedCT.code Short description Symbol in syntax defined by the system Definition A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination). Requirements Need to refer to a particular code in the system. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data Type code Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE.1 rim:./code orim:*fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code
display	Σ	1..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.code.coding:snomedCT.display Short description Representation defined by the system Definition A representation of the meaning of the code in the system, following the rules of the system. Requirements Need to be able to carry a human-readable meaning of the code for readers that do not know the system. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE.2 - but note this is not well followed rim:CV.displayName orim:*fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName
userSelected	Σ	0..1	boolean	There are no (further) constraints on this element Element Id DiagnosticReport.code.coding:snomedCT.userSelected Short description If this coding was chosen directly by the user Definition Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays). Requirements This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing. Comments Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely. Data Type boolean Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:Sometimes implied by being first rim:CD.codingRationale orim:fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]
text	Σ	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.code.text Short description Plain text representation of the concept Definition A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user. Requirements The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source. Comments Very often the text is the same as a displayName of one of the codings. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE.9. But note many systems use CE.2 for this rim:./originalText[mediaType/code="text/plain"]/data orim:fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText
subject	S Σ I	1..1	Reference(Group \| Device \| Data Standards Wales Patient Profile \| Data Standards Wales Location Profile)	There are no (further) constraints on this element Element Id DiagnosticReport.subject Short description The subject of the report - usually, but not always, the patient Alternate names Patient Definition The subject of the report. Usually, but not always, this is a patient. However, diagnostic services also perform analyses on specimens collected from a variety of other sources. Requirements SHALL know the subject context. Comments References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository. Data Type Reference(Group \| Device \| Data Standards Wales Patient Profile \| Data Standards Wales Location Profile) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1:SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim:n/a rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity) workflow:Event.subject w5:FiveWs.subject[x] v2:PID-3 (no HL7 v2 mapping for Group or Device) rim:participation[typeCode=SBJ] w5:FiveWs.subject
reference	Σ I	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.subject.reference Short description Literal reference, Relative, internal or absolute URL Definition A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources. Comments Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
type	Σ	0..1	uriBinding	There are no (further) constraints on this element Element Id DiagnosticReport.subject.type Short description Type the reference refers to (e.g. "Patient") Definition The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent. The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources). Comments This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified. Data Type uri Binding Aa resource (or, for logical models, the URI of the logical model). ResourceType (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
identifier	Σ	0..1	Identifier	There are no (further) constraints on this element Element Id DiagnosticReport.subject.identifier Short description Logical reference, when literal reference is not known Definition An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference. Comments When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it. Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation\|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any). Data Type Identifier Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CX / EI (occasionally, more often EI maps to a resource id or a URL) rim:II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd:Identifier rim:.identifier
use	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element Id DiagnosticReport.subject.identifier.use Short description usual \| official \| temp \| secondary \| old (If known) Definition The purpose of this identifier. Requirements Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. Comments Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. Data Type code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:N/A rim:Role.code or implied by context
type	Σ	0..1	CodeableConceptBinding	There are no (further) constraints on this element Element Id DiagnosticReport.subject.identifier.type Short description Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. Requirements Allows users to make use of identifiers when the identifier system is not known. Comments This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. Data Type CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE rim:CD orim:fhir:CodeableConcept rdfs:subClassOf dt:CD v2:CX.5 rim:Role.code or implied by context
system	Σ	0..1	uri	There are no (further) constraints on this element Element Id DiagnosticReport.subject.identifier.system Short description The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique. Requirements There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. Comments Identifier.system is always case sensitive. Data Type uri Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General http://www.acme.com/identifiers/patient Mappings rim:n/a v2:CX.4 / EI-2-4 rim:II.root or Role.id.root servd:./IdentifierType
value	Σ	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.subject.identifier.value Short description The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system. Comments If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General 123456 Mappings rim:n/a v2:CX.1 / EI.1 rim:II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd:./Value
period	Σ I	0..1	Period	There are no (further) constraints on this element Element Id DiagnosticReport.subject.identifier.period Short description Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use. Comments A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration. Data Type Period Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` per-1:If present, start SHALL have a lower value than end `start.hasValue().not() or end.hasValue().not() or (start <= end)` Mappings rim:n/a v2:DR rim:IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"] v2:CX.7 + CX.8 rim:Role.effectiveTime or implied by context servd:./StartDate and ./EndDate
assigner	Σ I	0..1	Reference(UK Core Organization)	There are no (further) constraints on this element Element Id DiagnosticReport.subject.identifier.assigner Short description Organization that issued id (may be just text) Definition Organization that issued/manages the identifier. Comments The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. Data Type Reference(UK Core Organization) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1:SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim:n/a rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2:CX.4 / (CX.4,CX.9,CX.10) rim:II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd:./IdentifierIssuingAuthority
display	Σ	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.subject.display Short description Text alternative for the resource Definition Plain text narrative that identifies the resource in addition to the resource reference. Comments This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
encounter	S Σ I	0..1	Reference(Data Standards Wales Encounter Profile)	There are no (further) constraints on this element Element Id DiagnosticReport.encounter Short description Health care event when test ordered Alternate names Context Definition The healthcare event (e.g. a patient and healthcare provider interaction) which this DiagnosticReport is about. Requirements Links the request to the Encounter context. Comments This will typically be the encounter the event occurred within, but some events may be initiated prior to or after the official completion of an encounter but still be tied to the context of the encounter (e.g. pre-admission laboratory tests). Data Type Reference(Data Standards Wales Encounter Profile) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1:SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim:n/a rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity) workflow:Event.encounter w5:FiveWs.context v2:PV1-19 rim:inboundRelationship[typeCode=COMP].source[classCode=ENC, moodCode=EVN]
reference	Σ I	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.encounter.reference Short description Literal reference, Relative, internal or absolute URL Definition A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources. Comments Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
type	Σ	0..1	uriBinding	There are no (further) constraints on this element Element Id DiagnosticReport.encounter.type Short description Type the reference refers to (e.g. "Patient") Definition The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent. The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources). Comments This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified. Data Type uri Binding Aa resource (or, for logical models, the URI of the logical model). ResourceType (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
identifier	Σ	0..1	Identifier	There are no (further) constraints on this element Element Id DiagnosticReport.encounter.identifier Short description Logical reference, when literal reference is not known Definition An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference. Comments When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it. Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation\|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any). Data Type Identifier Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CX / EI (occasionally, more often EI maps to a resource id or a URL) rim:II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd:Identifier rim:.identifier
use	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element Id DiagnosticReport.encounter.identifier.use Short description usual \| official \| temp \| secondary \| old (If known) Definition The purpose of this identifier. Requirements Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. Comments Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. Data Type code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:N/A rim:Role.code or implied by context
type	Σ	0..1	CodeableConceptBinding	There are no (further) constraints on this element Element Id DiagnosticReport.encounter.identifier.type Short description Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. Requirements Allows users to make use of identifiers when the identifier system is not known. Comments This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. Data Type CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE rim:CD orim:fhir:CodeableConcept rdfs:subClassOf dt:CD v2:CX.5 rim:Role.code or implied by context
system	Σ	0..1	uri	There are no (further) constraints on this element Element Id DiagnosticReport.encounter.identifier.system Short description The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique. Requirements There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. Comments Identifier.system is always case sensitive. Data Type uri Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General http://www.acme.com/identifiers/patient Mappings rim:n/a v2:CX.4 / EI-2-4 rim:II.root or Role.id.root servd:./IdentifierType
value	Σ	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.encounter.identifier.value Short description The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system. Comments If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General 123456 Mappings rim:n/a v2:CX.1 / EI.1 rim:II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd:./Value
period	Σ I	0..1	Period	There are no (further) constraints on this element Element Id DiagnosticReport.encounter.identifier.period Short description Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use. Comments A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration. Data Type Period Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` per-1:If present, start SHALL have a lower value than end `start.hasValue().not() or end.hasValue().not() or (start <= end)` Mappings rim:n/a v2:DR rim:IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"] v2:CX.7 + CX.8 rim:Role.effectiveTime or implied by context servd:./StartDate and ./EndDate
assigner	Σ I	0..1	Reference(UK Core Organization)	There are no (further) constraints on this element Element Id DiagnosticReport.encounter.identifier.assigner Short description Organization that issued id (may be just text) Definition Organization that issued/manages the identifier. Comments The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. Data Type Reference(UK Core Organization) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1:SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim:n/a rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2:CX.4 / (CX.4,CX.9,CX.10) rim:II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd:./IdentifierIssuingAuthority
display	Σ	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.encounter.display Short description Text alternative for the resource Definition Plain text narrative that identifies the resource in addition to the resource reference. Comments This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
effective[x]	S Σ	0..1		There are no (further) constraints on this element Element Id DiagnosticReport.effective[x] Short description Clinically relevant time/time-period for report Alternate names Observation time, Effective Time, Occurrence Definition The time or time-period the observed values are related to. When the subject of the report is a patient, this is usually either the time of the procedure or of specimen collection(s), but very often the source of the date/time is not known, only the date/time itself. Requirements Need to know where in the patient history to file/present this report. Comments If the diagnostic procedure was performed on the patient, this is the time it was performed. If there are specimens, the diagnostically relevant time can be derived from the specimen collection times, but the specimen information is not always available, and the exact relationship between the specimens and the diagnostically relevant time is not always automatic. Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a workflow:Event.occurrence[x] w5:FiveWs.done[x] v2:OBR-7 rim:effectiveTime
effectiveDateTime			dateTime	There are no (further) constraints on this element Data Type dateTime
effectivePeriod			Period	There are no (further) constraints on this element Data Type Period
issued	S Σ	0..1	instant	There are no (further) constraints on this element Element Id DiagnosticReport.issued Short description DateTime this version was made Alternate names Date published, Date Issued, Date Verified Definition The date and time that this version of the report was made available to providers, typically after the report was reviewed and verified. Requirements Clinicians need to be able to check the date that the report was released. Comments May be different from the update time of the resource itself, because that is the status of the record (potentially a secondary copy), not the actual release time of the report. Data Type instant Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a w5:FiveWs.recorded v2:OBR-22 rim:participation[typeCode=VRF or AUT].time
performer	Σ I	0..*	Reference(Data Standards Wales Practitioner Profile \| Data Standards Wales PractitionerRole Profile \| Data Standards Wales Organization Profile)	There are no (further) constraints on this element Element Id DiagnosticReport.performer Short description Responsible Diagnostic Service Alternate names Laboratory, Service, Practitioner, Department, Company, Authorized by, Director Definition The diagnostic service that is responsible for issuing the report. Requirements Need to know whom to contact if there are queries about the results. Also may need to track the source of reports for secondary data analysis. Comments This is not necessarily the source of the atomic data items or the entity that interpreted the results. It is the entity that takes responsibility for the clinical report. Data Type Reference(Data Standards Wales Practitioner Profile \| Data Standards Wales PractitionerRole Profile \| Data Standards Wales Organization Profile) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1:SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim:n/a rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity) workflow:Event.performer.actor w5:FiveWs.actor v2:PRT-8 (where this PRT-4-Participation = "PO") rim:.participation[typeCode=PRF]
reference	Σ I	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.performer.reference Short description Literal reference, Relative, internal or absolute URL Definition A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources. Comments Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
type	Σ	0..1	uriBinding	There are no (further) constraints on this element Element Id DiagnosticReport.performer.type Short description Type the reference refers to (e.g. "Patient") Definition The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent. The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources). Comments This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified. Data Type uri Binding Aa resource (or, for logical models, the URI of the logical model). ResourceType (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
identifier	Σ	0..1	Identifier	There are no (further) constraints on this element Element Id DiagnosticReport.performer.identifier Short description Logical reference, when literal reference is not known Definition An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference. Comments When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it. Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation\|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any). Data Type Identifier Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CX / EI (occasionally, more often EI maps to a resource id or a URL) rim:II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd:Identifier rim:.identifier
use	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element Id DiagnosticReport.performer.identifier.use Short description usual \| official \| temp \| secondary \| old (If known) Definition The purpose of this identifier. Requirements Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. Comments Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. Data Type code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:N/A rim:Role.code or implied by context
type	Σ	0..1	CodeableConceptBinding	There are no (further) constraints on this element Element Id DiagnosticReport.performer.identifier.type Short description Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. Requirements Allows users to make use of identifiers when the identifier system is not known. Comments This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. Data Type CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE rim:CD orim:fhir:CodeableConcept rdfs:subClassOf dt:CD v2:CX.5 rim:Role.code or implied by context
system	Σ	0..1	uri	There are no (further) constraints on this element Element Id DiagnosticReport.performer.identifier.system Short description The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique. Requirements There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. Comments Identifier.system is always case sensitive. Data Type uri Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General http://www.acme.com/identifiers/patient Mappings rim:n/a v2:CX.4 / EI-2-4 rim:II.root or Role.id.root servd:./IdentifierType
value	Σ	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.performer.identifier.value Short description The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system. Comments If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General 123456 Mappings rim:n/a v2:CX.1 / EI.1 rim:II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd:./Value
period	Σ I	0..1	Period	There are no (further) constraints on this element Element Id DiagnosticReport.performer.identifier.period Short description Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use. Comments A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration. Data Type Period Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` per-1:If present, start SHALL have a lower value than end `start.hasValue().not() or end.hasValue().not() or (start <= end)` Mappings rim:n/a v2:DR rim:IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"] v2:CX.7 + CX.8 rim:Role.effectiveTime or implied by context servd:./StartDate and ./EndDate
assigner	Σ I	0..1	Reference(UK Core Organization)	There are no (further) constraints on this element Element Id DiagnosticReport.performer.identifier.assigner Short description Organization that issued id (may be just text) Definition Organization that issued/manages the identifier. Comments The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. Data Type Reference(UK Core Organization) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1:SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim:n/a rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2:CX.4 / (CX.4,CX.9,CX.10) rim:II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd:./IdentifierIssuingAuthority
display	Σ	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.performer.display Short description Text alternative for the resource Definition Plain text narrative that identifies the resource in addition to the resource reference. Comments This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
resultsInterpreter	Σ I	0..*	Reference(Data Standards Wales Practitioner Profile \| Data Standards Wales PractitionerRole Profile \| Data Standards Wales Organization Profile)	There are no (further) constraints on this element Element Id DiagnosticReport.resultsInterpreter Short description Primary result interpreter Alternate names Analyzed by, Reported by Definition The practitioner or organization that is responsible for the report's conclusions and interpretations. Requirements Need to know whom to contact if there are queries about the results. Also may need to track the source of reports for secondary data analysis. Comments Might not be the same entity that takes responsibility for the clinical report. Data Type Reference(Data Standards Wales Practitioner Profile \| Data Standards Wales PractitionerRole Profile \| Data Standards Wales Organization Profile) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1:SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim:n/a rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity) workflow:Event.performer.actor w5:FiveWs.actor v2:OBR-32, PRT-8 (where this PRT-4-Participation = "PI") rim:.participation[typeCode=PRF]
reference	Σ I	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.resultsInterpreter.reference Short description Literal reference, Relative, internal or absolute URL Definition A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources. Comments Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
type	Σ	0..1	uriBinding	There are no (further) constraints on this element Element Id DiagnosticReport.resultsInterpreter.type Short description Type the reference refers to (e.g. "Patient") Definition The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent. The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources). Comments This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified. Data Type uri Binding Aa resource (or, for logical models, the URI of the logical model). ResourceType (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
identifier	Σ	0..1	Identifier	There are no (further) constraints on this element Element Id DiagnosticReport.resultsInterpreter.identifier Short description Logical reference, when literal reference is not known Definition An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference. Comments When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it. Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation\|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any). Data Type Identifier Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CX / EI (occasionally, more often EI maps to a resource id or a URL) rim:II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd:Identifier rim:.identifier
use	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element Id DiagnosticReport.resultsInterpreter.identifier.use Short description usual \| official \| temp \| secondary \| old (If known) Definition The purpose of this identifier. Requirements Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. Comments Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. Data Type code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:N/A rim:Role.code or implied by context
type	Σ	0..1	CodeableConceptBinding	There are no (further) constraints on this element Element Id DiagnosticReport.resultsInterpreter.identifier.type Short description Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. Requirements Allows users to make use of identifiers when the identifier system is not known. Comments This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. Data Type CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE rim:CD orim:fhir:CodeableConcept rdfs:subClassOf dt:CD v2:CX.5 rim:Role.code or implied by context
system	Σ	0..1	uri	There are no (further) constraints on this element Element Id DiagnosticReport.resultsInterpreter.identifier.system Short description The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique. Requirements There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. Comments Identifier.system is always case sensitive. Data Type uri Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General http://www.acme.com/identifiers/patient Mappings rim:n/a v2:CX.4 / EI-2-4 rim:II.root or Role.id.root servd:./IdentifierType
value	Σ	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.resultsInterpreter.identifier.value Short description The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system. Comments If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General 123456 Mappings rim:n/a v2:CX.1 / EI.1 rim:II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd:./Value
period	Σ I	0..1	Period	There are no (further) constraints on this element Element Id DiagnosticReport.resultsInterpreter.identifier.period Short description Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use. Comments A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration. Data Type Period Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` per-1:If present, start SHALL have a lower value than end `start.hasValue().not() or end.hasValue().not() or (start <= end)` Mappings rim:n/a v2:DR rim:IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"] v2:CX.7 + CX.8 rim:Role.effectiveTime or implied by context servd:./StartDate and ./EndDate
assigner	Σ I	0..1	Reference(UK Core Organization)	There are no (further) constraints on this element Element Id DiagnosticReport.resultsInterpreter.identifier.assigner Short description Organization that issued id (may be just text) Definition Organization that issued/manages the identifier. Comments The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. Data Type Reference(UK Core Organization) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1:SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim:n/a rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2:CX.4 / (CX.4,CX.9,CX.10) rim:II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd:./IdentifierIssuingAuthority
display	Σ	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.resultsInterpreter.display Short description Text alternative for the resource Definition Plain text narrative that identifies the resource in addition to the resource reference. Comments This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
specimen	S I	0..*	Reference(Data Standards Wales Specimen Profile)	There are no (further) constraints on this element Element Id DiagnosticReport.specimen Short description Specimens this report is based on Definition Details about the specimens on which this diagnostic report is based. Requirements Need to be able to report information about the collected specimens on which the report is based. Comments If the specimen is sufficiently specified with a code in the test result name, then this additional data may be redundant. If there are multiple specimens, these may be represented per observation or group. Data Type Reference(Data Standards Wales Specimen Profile) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1:SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim:n/a rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2:SPM rim:participation[typeCode=SBJ]
reference	Σ I	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.specimen.reference Short description Literal reference, Relative, internal or absolute URL Definition A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources. Comments Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
type	Σ	0..1	uriBinding	There are no (further) constraints on this element Element Id DiagnosticReport.specimen.type Short description Type the reference refers to (e.g. "Patient") Definition The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent. The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources). Comments This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified. Data Type uri Binding Aa resource (or, for logical models, the URI of the logical model). ResourceType (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
identifier	Σ	0..1	Identifier	There are no (further) constraints on this element Element Id DiagnosticReport.specimen.identifier Short description Logical reference, when literal reference is not known Definition An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference. Comments When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it. Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation\|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any). Data Type Identifier Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CX / EI (occasionally, more often EI maps to a resource id or a URL) rim:II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd:Identifier rim:.identifier
use	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element Id DiagnosticReport.specimen.identifier.use Short description usual \| official \| temp \| secondary \| old (If known) Definition The purpose of this identifier. Requirements Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. Comments Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. Data Type code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:N/A rim:Role.code or implied by context
type	Σ	0..1	CodeableConceptBinding	There are no (further) constraints on this element Element Id DiagnosticReport.specimen.identifier.type Short description Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. Requirements Allows users to make use of identifiers when the identifier system is not known. Comments This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. Data Type CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE rim:CD orim:fhir:CodeableConcept rdfs:subClassOf dt:CD v2:CX.5 rim:Role.code or implied by context
system	Σ	0..1	uri	There are no (further) constraints on this element Element Id DiagnosticReport.specimen.identifier.system Short description The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique. Requirements There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. Comments Identifier.system is always case sensitive. Data Type uri Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General http://www.acme.com/identifiers/patient Mappings rim:n/a v2:CX.4 / EI-2-4 rim:II.root or Role.id.root servd:./IdentifierType
value	Σ	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.specimen.identifier.value Short description The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system. Comments If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General 123456 Mappings rim:n/a v2:CX.1 / EI.1 rim:II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd:./Value
period	Σ I	0..1	Period	There are no (further) constraints on this element Element Id DiagnosticReport.specimen.identifier.period Short description Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use. Comments A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration. Data Type Period Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` per-1:If present, start SHALL have a lower value than end `start.hasValue().not() or end.hasValue().not() or (start <= end)` Mappings rim:n/a v2:DR rim:IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"] v2:CX.7 + CX.8 rim:Role.effectiveTime or implied by context servd:./StartDate and ./EndDate
assigner	Σ I	0..1	Reference(UK Core Organization)	There are no (further) constraints on this element Element Id DiagnosticReport.specimen.identifier.assigner Short description Organization that issued id (may be just text) Definition Organization that issued/manages the identifier. Comments The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. Data Type Reference(UK Core Organization) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1:SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim:n/a rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2:CX.4 / (CX.4,CX.9,CX.10) rim:II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd:./IdentifierIssuingAuthority
display	Σ	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.specimen.display Short description Text alternative for the resource Definition Plain text narrative that identifies the resource in addition to the resource reference. Comments This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
result	S I	1..1	Reference(Data Standards Wales Observation Profile)	There are no (further) constraints on this element Element Id DiagnosticReport.result Short description Observations Alternate names Data, Atomic Value, Result, Atomic result, Data, Test, Analyte, Battery, Organizer Definition Observations that are part of this diagnostic report. Requirements Need to support individual results, or groups of results, where the result grouping is arbitrary, but meaningful. Comments Observations can contain observations. Data Type Reference(Data Standards Wales Observation Profile) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1:SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim:n/a rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2:OBXs rim:outboundRelationship[typeCode=COMP].target
reference	Σ I	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.result.reference Short description Literal reference, Relative, internal or absolute URL Definition A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources. Comments Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
type	Σ	0..1	uriBinding	There are no (further) constraints on this element Element Id DiagnosticReport.result.type Short description Type the reference refers to (e.g. "Patient") Definition The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent. The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources). Comments This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified. Data Type uri Binding Aa resource (or, for logical models, the URI of the logical model). ResourceType (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
identifier	Σ	0..1	Identifier	There are no (further) constraints on this element Element Id DiagnosticReport.result.identifier Short description Logical reference, when literal reference is not known Definition An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference. Comments When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it. Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation\|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any). Data Type Identifier Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CX / EI (occasionally, more often EI maps to a resource id or a URL) rim:II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd:Identifier rim:.identifier
use	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element Id DiagnosticReport.result.identifier.use Short description usual \| official \| temp \| secondary \| old (If known) Definition The purpose of this identifier. Requirements Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. Comments Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. Data Type code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:N/A rim:Role.code or implied by context
type	Σ	0..1	CodeableConceptBinding	There are no (further) constraints on this element Element Id DiagnosticReport.result.identifier.type Short description Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. Requirements Allows users to make use of identifiers when the identifier system is not known. Comments This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. Data Type CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE rim:CD orim:fhir:CodeableConcept rdfs:subClassOf dt:CD v2:CX.5 rim:Role.code or implied by context
system	Σ	0..1	uri	There are no (further) constraints on this element Element Id DiagnosticReport.result.identifier.system Short description The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique. Requirements There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. Comments Identifier.system is always case sensitive. Data Type uri Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General http://www.acme.com/identifiers/patient Mappings rim:n/a v2:CX.4 / EI-2-4 rim:II.root or Role.id.root servd:./IdentifierType
value	Σ	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.result.identifier.value Short description The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system. Comments If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General 123456 Mappings rim:n/a v2:CX.1 / EI.1 rim:II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd:./Value
period	Σ I	0..1	Period	There are no (further) constraints on this element Element Id DiagnosticReport.result.identifier.period Short description Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use. Comments A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration. Data Type Period Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` per-1:If present, start SHALL have a lower value than end `start.hasValue().not() or end.hasValue().not() or (start <= end)` Mappings rim:n/a v2:DR rim:IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"] v2:CX.7 + CX.8 rim:Role.effectiveTime or implied by context servd:./StartDate and ./EndDate
assigner	Σ I	0..1	Reference(UK Core Organization)	There are no (further) constraints on this element Element Id DiagnosticReport.result.identifier.assigner Short description Organization that issued id (may be just text) Definition Organization that issued/manages the identifier. Comments The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. Data Type Reference(UK Core Organization) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1:SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim:n/a rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2:CX.4 / (CX.4,CX.9,CX.10) rim:II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd:./IdentifierIssuingAuthority
display	Σ	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.result.display Short description Text alternative for the resource Definition Plain text narrative that identifies the resource in addition to the resource reference. Comments This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
imagingStudy	S I	0..*	Reference(Data Standards Wales ImagingStudy Profile)	There are no (further) constraints on this element Element Id DiagnosticReport.imagingStudy Short description Reference to full details of imaging associated with the diagnostic report Definition One or more links to full details of any imaging performed during the diagnostic investigation. Typically, this is imaging performed by DICOM enabled modalities, but this is not required. A fully enabled PACS viewer can use this information to provide views of the source images. Comments ImagingStudy and the image element are somewhat overlapping - typically, the list of image references in the image element will also be found in one of the imaging study resources. However, each caters to different types of displays for different types of purposes. Neither, either, or both may be provided. Data Type Reference(Data Standards Wales ImagingStudy Profile) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1:SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim:n/a rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity) rim:outboundRelationship[typeCode=COMP].target[classsCode=DGIMG, moodCode=EVN]
reference	Σ I	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.imagingStudy.reference Short description Literal reference, Relative, internal or absolute URL Definition A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources. Comments Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
type	Σ	0..1	uriBinding	There are no (further) constraints on this element Element Id DiagnosticReport.imagingStudy.type Short description Type the reference refers to (e.g. "Patient") Definition The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent. The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources). Comments This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified. Data Type uri Binding Aa resource (or, for logical models, the URI of the logical model). ResourceType (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
identifier	Σ	0..1	Identifier	There are no (further) constraints on this element Element Id DiagnosticReport.imagingStudy.identifier Short description Logical reference, when literal reference is not known Definition An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference. Comments When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it. Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation\|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any). Data Type Identifier Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CX / EI (occasionally, more often EI maps to a resource id or a URL) rim:II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd:Identifier rim:.identifier
use	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element Id DiagnosticReport.imagingStudy.identifier.use Short description usual \| official \| temp \| secondary \| old (If known) Definition The purpose of this identifier. Requirements Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. Comments Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. Data Type code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:N/A rim:Role.code or implied by context
type	Σ	0..1	CodeableConceptBinding	There are no (further) constraints on this element Element Id DiagnosticReport.imagingStudy.identifier.type Short description Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. Requirements Allows users to make use of identifiers when the identifier system is not known. Comments This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. Data Type CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE rim:CD orim:fhir:CodeableConcept rdfs:subClassOf dt:CD v2:CX.5 rim:Role.code or implied by context
system	Σ	0..1	uri	There are no (further) constraints on this element Element Id DiagnosticReport.imagingStudy.identifier.system Short description The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique. Requirements There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. Comments Identifier.system is always case sensitive. Data Type uri Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General http://www.acme.com/identifiers/patient Mappings rim:n/a v2:CX.4 / EI-2-4 rim:II.root or Role.id.root servd:./IdentifierType
value	Σ	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.imagingStudy.identifier.value Short description The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system. Comments If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General 123456 Mappings rim:n/a v2:CX.1 / EI.1 rim:II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd:./Value
period	Σ I	0..1	Period	There are no (further) constraints on this element Element Id DiagnosticReport.imagingStudy.identifier.period Short description Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use. Comments A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration. Data Type Period Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` per-1:If present, start SHALL have a lower value than end `start.hasValue().not() or end.hasValue().not() or (start <= end)` Mappings rim:n/a v2:DR rim:IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"] v2:CX.7 + CX.8 rim:Role.effectiveTime or implied by context servd:./StartDate and ./EndDate
assigner	Σ I	0..1	Reference(UK Core Organization)	There are no (further) constraints on this element Element Id DiagnosticReport.imagingStudy.identifier.assigner Short description Organization that issued id (may be just text) Definition Organization that issued/manages the identifier. Comments The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. Data Type Reference(UK Core Organization) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1:SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim:n/a rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2:CX.4 / (CX.4,CX.9,CX.10) rim:II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd:./IdentifierIssuingAuthority
display	Σ	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.imagingStudy.display Short description Text alternative for the resource Definition Plain text narrative that identifies the resource in addition to the resource reference. Comments This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
media	Σ	0..*	BackboneElement	There are no (further) constraints on this element Element Id DiagnosticReport.media Short description Key images associated with this report Alternate names DICOM, Slides, Scans Definition A list of key images associated with this report. The images are generally created during the diagnostic process, and may be directly of the patient, or of treated specimens (i.e. slides of interest). Requirements Many diagnostic services include images in the report as part of their service. Data Type BackboneElement Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:OBX? rim:outboundRelationship[typeCode=COMP].target
comment		0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.media.comment Short description Comment about the image (e.g. explanation) Definition A comment about the image. Typically, this is used to provide an explanation for why the image is included, or to draw the viewer's attention to important features. Requirements The provider of the report should make a comment about each image included in the report. Comments The comment should be displayed with the image. It would be common for the report to include additional discussion of the image contents in other sections such as the conclusion. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:.inboundRelationship[typeCode=COMP].source[classCode=OBS, moodCode=EVN, code="annotation"].value
link	Σ I	1..1	Reference(Media)	There are no (further) constraints on this element Element Id DiagnosticReport.media.link Short description Reference to the image source Definition Reference to the image source. Comments References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository. Data Type Reference(Media) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1:SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim:n/a rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity) rim:.value.reference
reference	Σ I	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.media.link.reference Short description Literal reference, Relative, internal or absolute URL Definition A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources. Comments Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
type	Σ	0..1	uriBinding	There are no (further) constraints on this element Element Id DiagnosticReport.media.link.type Short description Type the reference refers to (e.g. "Patient") Definition The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent. The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources). Comments This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified. Data Type uri Binding Aa resource (or, for logical models, the URI of the logical model). ResourceType (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
identifier	Σ	0..1	Identifier	There are no (further) constraints on this element Element Id DiagnosticReport.media.link.identifier Short description Logical reference, when literal reference is not known Definition An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference. Comments When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it. Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation\|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any). Data Type Identifier Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CX / EI (occasionally, more often EI maps to a resource id or a URL) rim:II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd:Identifier rim:.identifier
use	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element Id DiagnosticReport.media.link.identifier.use Short description usual \| official \| temp \| secondary \| old (If known) Definition The purpose of this identifier. Requirements Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. Comments Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. Data Type code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:N/A rim:Role.code or implied by context
type	Σ	0..1	CodeableConceptBinding	There are no (further) constraints on this element Element Id DiagnosticReport.media.link.identifier.type Short description Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. Requirements Allows users to make use of identifiers when the identifier system is not known. Comments This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. Data Type CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE rim:CD orim:fhir:CodeableConcept rdfs:subClassOf dt:CD v2:CX.5 rim:Role.code or implied by context
system	Σ	0..1	uri	There are no (further) constraints on this element Element Id DiagnosticReport.media.link.identifier.system Short description The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique. Requirements There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. Comments Identifier.system is always case sensitive. Data Type uri Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General http://www.acme.com/identifiers/patient Mappings rim:n/a v2:CX.4 / EI-2-4 rim:II.root or Role.id.root servd:./IdentifierType
value	Σ	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.media.link.identifier.value Short description The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system. Comments If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General 123456 Mappings rim:n/a v2:CX.1 / EI.1 rim:II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd:./Value
period	Σ I	0..1	Period	There are no (further) constraints on this element Element Id DiagnosticReport.media.link.identifier.period Short description Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use. Comments A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration. Data Type Period Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` per-1:If present, start SHALL have a lower value than end `start.hasValue().not() or end.hasValue().not() or (start <= end)` Mappings rim:n/a v2:DR rim:IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"] v2:CX.7 + CX.8 rim:Role.effectiveTime or implied by context servd:./StartDate and ./EndDate
assigner	Σ I	0..1	Reference(UK Core Organization)	There are no (further) constraints on this element Element Id DiagnosticReport.media.link.identifier.assigner Short description Organization that issued id (may be just text) Definition Organization that issued/manages the identifier. Comments The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. Data Type Reference(UK Core Organization) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1:SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim:n/a rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2:CX.4 / (CX.4,CX.9,CX.10) rim:II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd:./IdentifierIssuingAuthority
display	Σ	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.media.link.display Short description Text alternative for the resource Definition Plain text narrative that identifies the resource in addition to the resource reference. Comments This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
conclusion		0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.conclusion Short description Clinical conclusion (interpretation) of test results Alternate names Report Definition Concise and clinically contextualized summary conclusion (interpretation/impression) of the diagnostic report. Requirements Need to be able to provide a conclusion that is not lost among the basic result data. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:OBX rim:inboundRelationship[typeCode="SPRT"].source[classCode=OBS, moodCode=EVN, code=LOINC:48767-8].value (type=ST)
conclusionCode		0..*	CodeableConcept	There are no (further) constraints on this element Element Id DiagnosticReport.conclusionCode Short description Codes for the clinical conclusion of test results Definition One or more codes that represent the summary conclusion (interpretation/impression) of the diagnostic report. Comments Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination. Data Type CodeableConcept Binding Diagnosis codes provided as adjuncts to the report. SNOMEDCTClinicalFindings (example) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE rim:CD orim:fhir:CodeableConcept rdfs:subClassOf dt:CD v2:OBX rim:inboundRelationship[typeCode=SPRT].source[classCode=OBS, moodCode=EVN, code=LOINC:54531-9].value (type=CD)
coding	Σ	0..*	Coding	There are no (further) constraints on this element Element Id DiagnosticReport.conclusionCode.coding Short description Code defined by a terminology system Definition A reference to a code defined by a terminology system. Requirements Allows for alternative encodings within a code system, and translations to other code systems. Comments Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. Data Type Coding Sliced: Unordered, Open, by system(Value) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim:CV orim:fhir:Coding rdfs:subClassOf dt:CDCoding v2:CE.1-8, CE.10-22 rim:union(., ./translation) orim:fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
snomedCT	Σ	0..*	CodingBinding	There are no (further) constraints on this element Element Id DiagnosticReport.conclusionCode.coding:snomedCT Short description Code defined by a terminology system Definition A reference to a code defined by a terminology system. Requirements Allows for alternative encodings within a code system, and translations to other code systems. Comments Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. Data Type Coding Binding A code from the SNOMED UK Clinical Terminology coding system UKCoreFindingCode (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim:CV orim:fhir:Coding rdfs:subClassOf dt:CDCoding v2:CE.1-8, CE.10-22 rim:union(., ./translation) orim:fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
system	Σ	1..1	uriFixed Value	There are no (further) constraints on this element Element Id DiagnosticReport.conclusionCode.coding:snomedCT.system Short description Identity of the terminology system Definition The identification of the code system that defines the meaning of the symbol in the code. Requirements Need to be unambiguous about the source of the definition of the symbol. Comments The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously. Data Type uri Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Fixed Value http://snomed.info/sct Mappings rim:n/a v2:CE.3 rim:./codeSystem orim:*fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem
version	Σ	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.conclusionCode.coding:snomedCT.version Short description Version of the system - if relevant Definition The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged. Comments Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE.7 rim:./codeSystemVersion orim:*fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion
code	Σ	1..1	code	There are no (further) constraints on this element Element Id DiagnosticReport.conclusionCode.coding:snomedCT.code Short description Symbol in syntax defined by the system Definition A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination). Requirements Need to refer to a particular code in the system. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data Type code Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE.1 rim:./code orim:*fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code
display	Σ	1..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.conclusionCode.coding:snomedCT.display Short description Representation defined by the system Definition A representation of the meaning of the code in the system, following the rules of the system. Requirements Need to be able to carry a human-readable meaning of the code for readers that do not know the system. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE.2 - but note this is not well followed rim:CV.displayName orim:*fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName
userSelected	Σ	0..1	boolean	There are no (further) constraints on this element Element Id DiagnosticReport.conclusionCode.coding:snomedCT.userSelected Short description If this coding was chosen directly by the user Definition Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays). Requirements This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing. Comments Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely. Data Type boolean Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:Sometimes implied by being first rim:CD.codingRationale orim:fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]
text	Σ	0..1	string	There are no (further) constraints on this element Element Id DiagnosticReport.conclusionCode.text Short description Plain text representation of the concept Definition A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user. Requirements The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source. Comments Very often the text is the same as a displayName of one of the codings. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE.9. But note many systems use CE.2 for this rim:./originalText[mediaType/code="text/plain"]/data orim:fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText
presentedForm	S I	0..*	Attachment	There are no (further) constraints on this element Element Id DiagnosticReport.presentedForm Short description Entire report as issued Definition Rich text representation of the entire result as issued by the diagnostic service. Multiple formats are allowed but they SHALL be semantically equivalent. Requirements Gives laboratory the ability to provide its own fully formatted report for clinical fidelity. Comments "application/pdf" is recommended as the most reliable and interoperable in this context. Data Type Attachment Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` att-1:If the Attachment has data, it SHALL have a contentType `data.empty() or contentType.exists()` Mappings rim:n/a v2:ED/RP rim:ED v2:OBX rim:text (type=ED)

Pathology - Full Blood Count

Multiple Panel

Radiology - CT Abdomen

Cardiology - ECG

Cardiology - Stress Test

Mandatory and Must Support Data Elements

When an element is mandatory (min=1), the data is expected to always be present. Elements marked with an S must be supported by both producing and receiving systems and SHOULD be populated if the data exists.

Each DiagnosticReport must have:

A status
A category of LAB *
A code describing the type of report
A patient

Each DiagnosticReport must support:

The encounter the report occurred within
A category
An effective timestamp
An issued date for this report version
An author (actor) producing the report
A reference to one or more specimens
A reference to one or more test results
A reference to one or more images - (Inherited)
A reference to the full report (presentedForm) - (Inherited)

*see Implementation Guidance for the identifier element below

Implementation Guidance

The DiagnosticReport.status field SHALL be populated to indicate whether the report is preliminary, partial, final.
The DiagnosticReport.category field SHALL be populated with LAB - (Laboratory procedure) from codesystem: http://terminology.hl7.org/CodeSystem/v2-0074.
The DiagnosticReport.code field SHALL be populated.
Depending on the report type the DiagnosticReport.result, DiagnosticReport.imagingStudy or DiagnosticReport.presentedForm SHALL be populated according to guidance set out in the Diagnostic Reports Guidance page.
The DiagnosticReport.identifier field SHOULD contain all available identifiers. Typical identifiers include:
- Identifiers assigned to the DiagnosticReport by the Welsh Results and Reporting Service
- Other identifiers assigned by a hospital PAS or other clinical system.
The DiagnosticReport.effective field SHOULD be populated. The diagnostically relevant time (known as the “effective time” and typically the time of the procedure)*
The DiagnosticReport.issued field SHOULD be populated. The time this version of the report was made available*

Example DiagnosticReports

The following example resources are provided within this guide:

Search Parameters

Guidance on mandatory and optional searches are found in the Data Standards Wales DiagnosticReport Profile