Home

Home

UKCoreDevice (Device)	I		Device	There are no (further) constraints on this element Element id Device Short description Item used in healthcare Definition A type of a manufactured item that is used in the provision of healthcare without being substantially changed through that activity. The device may be a medical or non-medical device. Data type Device Constraints dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources `contained.contained.empty()` dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated `contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()` dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource `contained.where((('#'+id in (%resource.descendants().reference \| %resource.descendants().as(canonical) \| %resource.descendants().as(uri) \| %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty()` dom-6: A resource should have narrative for robust management text.`div`.exists() dom-5: If a resource is contained in another resource, it SHALL NOT have a security label `contained.meta.security.empty()` Mappings rim: Entity. Role, or Act rim: Device
id	Σ	0..1	string	There are no (further) constraints on this element Element id Device.id Short description Logical id of this artifact Definition The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes. Comments The only time that a resource does not have an id is when it is being submitted to the server using a create operation. Data type string
meta	Σ	0..1	Meta	There are no (further) constraints on this element Element id Device.meta Short description Metadata about the resource Definition The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource. Data type Meta Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: N/A
implicitRules	Σ ?!	0..1	uri	There are no (further) constraints on this element Element id Device.implicitRules Short description A set of rules under which this content was created Definition A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc. Comments Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
language		0..1	codeBinding	There are no (further) constraints on this element Element id Device.language Short description Language of the resource content Definition The base language in which the resource is written. Comments Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute). Data type code Binding A human language. CommonLanguages (preferred) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
text		0..1	Narrative	There are no (further) constraints on this element Element id Device.text Short description Text summary of the resource, for human interpretation Alternate names narrative, html, xhtml, display Definition A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety. Comments Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later. Data type Narrative Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: N/A rim: Act.text?
contained		0..*	Resource	There are no (further) constraints on this element Element id Device.contained Short description Contained, inline Resources Alternate names inline resources, anonymous resources, contained resources Definition These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope. Comments This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels. Data type Resource Mappings rim: Entity. Role, or Act rim: N/A
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Device.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	?! I	0..*	Extension	There are no (further) constraints on this element Element id Device.modifierExtension Short description Extensions that cannot be ignored Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
identifier		0..*	Identifier	There are no (further) constraints on this element Element id Device.identifier Short description Instance identifier Definition Unique instance identifiers assigned to a device by manufacturers other organizations or owners. Comments The barcode string from a barcode present on a device label or package may identify the instance, include names given to the device in local usage, or may identify the type of device. If the identifier identifies the type of device, Device.type element should be used. Data type Identifier Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: CX / EI (occasionally, more often EI maps to a resource id or a URL) rim: II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd: Identifier w5: FiveWs.identifier rim: .id udi: The serial number which is a component of the production identifier (PI), a conditional, variable portion of a UDI. The identifier.type code should be set to “SNO”(Serial Number) and the system left empty.
id		0..1	string	There are no (further) constraints on this element Element id Device.identifier.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Device.identifier.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
use	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element id Device.identifier.use Short description usual \| official \| temp \| secondary \| old (If known) Definition The purpose of this identifier. Requirements Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. Comments Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. Data type code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: N/A rim: Role.code or implied by context
type	Σ	0..1	CodeableConceptBinding	There are no (further) constraints on this element Element id Device.identifier.type Short description Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. Requirements Allows users to make use of identifiers when the identifier system is not known. Comments This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. Data type CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD v2: CX.5 rim: Role.code or implied by context
system	Σ	0..1	uri	There are no (further) constraints on this element Element id Device.identifier.system Short description The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique. Requirements There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. Comments Identifier.system is always case sensitive. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General http://www.acme.com/identifiers/patient Mappings rim: n/a v2: CX.4 / EI-2-4 rim: II.root or Role.id.root servd: ./IdentifierType
value	Σ	0..1	string	There are no (further) constraints on this element Element id Device.identifier.value Short description The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system. Comments If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General 123456 Mappings rim: n/a v2: CX.1 / EI.1 rim: II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd: ./Value
period	Σ I	0..1	Period	There are no (further) constraints on this element Element id Device.identifier.period Short description Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use. Comments A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration. Data type Period Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` per-1: If present, start SHALL have a lower value than end `start.hasValue().not() or end.hasValue().not() or (start <= end)` Mappings rim: n/a v2: DR rim: IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"] v2: CX.7 + CX.8 rim: Role.effectiveTime or implied by context servd: ./StartDate and ./EndDate
assigner	Σ I	0..1	Reference()	Element id Device.identifier.assigner Short description Organization that issued id (may be just text) Definition Organization that issued/manages the identifier. Comments The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. Data type Reference() Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2: CX.4 / (CX.4,CX.9,CX.10) rim: II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd: ./IdentifierIssuingAuthority
definition	I	0..1	Reference(DeviceDefinition)	There are no (further) constraints on this element Element id Device.definition Short description The reference to the definition for the device Definition The reference to the definition for the device. Comments References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository. Data type Reference(DeviceDefinition) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity)
id		0..1	string	There are no (further) constraints on this element Element id Device.definition.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Device.definition.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
reference	Σ I	0..1	string	There are no (further) constraints on this element Element id Device.definition.reference Short description Literal reference, Relative, internal or absolute URL Definition A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources. Comments Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: N/A
type	Σ	0..1	uriBinding	There are no (further) constraints on this element Element id Device.definition.type Short description Type the reference refers to (e.g. "Patient") Definition The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent. The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources). Comments This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified. Data type uri Binding Aa resource (or, for logical models, the URI of the logical model). ResourceType (extensible) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: N/A
identifier	Σ	0..1	Identifier	There are no (further) constraints on this element Element id Device.definition.identifier Short description Logical reference, when literal reference is not known Definition An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference. Comments When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it. Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation\|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any). Data type Identifier Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: CX / EI (occasionally, more often EI maps to a resource id or a URL) rim: II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd: Identifier rim: .identifier
id		0..1	string	There are no (further) constraints on this element Element id Device.definition.identifier.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Device.definition.identifier.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
use	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element id Device.definition.identifier.use Short description usual \| official \| temp \| secondary \| old (If known) Definition The purpose of this identifier. Requirements Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. Comments Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. Data type code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: N/A rim: Role.code or implied by context
type	Σ	0..1	CodeableConceptBinding	There are no (further) constraints on this element Element id Device.definition.identifier.type Short description Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. Requirements Allows users to make use of identifiers when the identifier system is not known. Comments This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. Data type CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD v2: CX.5 rim: Role.code or implied by context
system	Σ	0..1	uri	There are no (further) constraints on this element Element id Device.definition.identifier.system Short description The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique. Requirements There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. Comments Identifier.system is always case sensitive. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General http://www.acme.com/identifiers/patient Mappings rim: n/a v2: CX.4 / EI-2-4 rim: II.root or Role.id.root servd: ./IdentifierType
value	Σ	0..1	string	There are no (further) constraints on this element Element id Device.definition.identifier.value Short description The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system. Comments If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General 123456 Mappings rim: n/a v2: CX.1 / EI.1 rim: II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd: ./Value
period	Σ I	0..1	Period	There are no (further) constraints on this element Element id Device.definition.identifier.period Short description Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use. Comments A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration. Data type Period Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` per-1: If present, start SHALL have a lower value than end `start.hasValue().not() or end.hasValue().not() or (start <= end)` Mappings rim: n/a v2: DR rim: IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"] v2: CX.7 + CX.8 rim: Role.effectiveTime or implied by context servd: ./StartDate and ./EndDate
assigner	Σ I	0..1	Reference()	Element id Device.definition.identifier.assigner Short description Organization that issued id (may be just text) Definition Organization that issued/manages the identifier. Comments The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. Data type Reference() Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2: CX.4 / (CX.4,CX.9,CX.10) rim: II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd: ./IdentifierIssuingAuthority
display	Σ	0..1	string	There are no (further) constraints on this element Element id Device.definition.display Short description Text alternative for the resource Definition Plain text narrative that identifies the resource in addition to the resource reference. Comments This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: N/A
udiCarrier	Σ	0..*	BackboneElement	There are no (further) constraints on this element Element id Device.udiCarrier Short description Unique Device Identifier (UDI) Barcode string Definition Unique device identifier (UDI) assigned to device label or package. Note that the Device may include multiple udiCarriers as it either may include just the udiCarrier for the jurisdiction it is sold, or for multiple jurisdictions it could have been sold. Comments UDI may identify an unique instance of a device, or it may only identify the type of the device. See UDI mappings for a complete mapping of UDI parts to Device. Data type BackboneElement Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a w5: FiveWs.identifier rim: .id and .code
id		0..1	string	There are no (further) constraints on this element Element id Device.udiCarrier.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Device.udiCarrier.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id Device.udiCarrier.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
deviceIdentifier	Σ	0..1	string	There are no (further) constraints on this element Element id Device.udiCarrier.deviceIdentifier Short description Mandatory fixed portion of UDI Alternate names DI Definition The device identifier (DI) is a mandatory, fixed portion of a UDI that identifies the labeler and the specific version or model of a device. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a w5: FiveWs.what[x] rim: Role.id.extension udi: The device identifier (DI), a mandatory, fixed portion of a UDI that identifies the labeler and the specific version or model of a device.
issuer		0..1	uri	There are no (further) constraints on this element Element id Device.udiCarrier.issuer Short description UDI Issuing Organization Alternate names Barcode System Definition Organization that is charged with issuing UDIs for devices. For example, the US FDA issuers include : GS1: http://hl7.org/fhir/NamingSystem/gs1-di, HIBCC: http://hl7.org/fhir/NamingSystem/hibcc-dI, ICCBBA for blood containers: http://hl7.org/fhir/NamingSystem/iccbba-blood-di, ICCBA for other devices: http://hl7.org/fhir/NamingSystem/iccbba-other-di. Comments see http://en.wikipedia.org/wiki/Uniform_resource_identifier Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: Role.id.root udi: All UDIs are to be issued under a system operated by an Jurisdiction-accredited issuing agency. GS1 DIs: http://hl7.org/fhir/NamingSystem/gs1 HIBCC DIs: http://hl7.org/fhir/NamingSystem/hibcc ICCBBA DIs for blood containers: http://hl7.org/fhir/NamingSystem/iccbba-blood ICCBA DIs for other devices: http://hl7.org/fhir/NamingSystem/iccbba-other
jurisdiction		0..1	uri	There are no (further) constraints on this element Element id Device.udiCarrier.jurisdiction Short description Regional UDI authority Definition The identity of the authoritative source for UDI generation within a jurisdiction. All UDIs are globally unique within a single namespace with the appropriate repository uri as the system. For example, UDIs of devices managed in the U.S. by the FDA, the value is http://hl7.org/fhir/NamingSystem/fda-udi. Requirements Allows a recipient of a UDI to know which database will contain the UDI-associated metadata. Comments see http://en.wikipedia.org/wiki/Uniform_resource_identifier Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: Role.scoper
carrierAIDC	Σ	0..1	base64Binary	There are no (further) constraints on this element Element id Device.udiCarrier.carrierAIDC Short description UDI Machine Readable Barcode String Alternate names Automatic Identification and Data Capture Definition The full UDI carrier of the Automatic Identification and Data Capture (AIDC) technology representation of the barcode string as printed on the packaging of the device - e.g., a barcode or RFID. Because of limitations on character sets in XML and the need to round-trip JSON data through XML, AIDC Formats SHALL be base64 encoded. Comments The AIDC form of UDIs should be scanned or otherwise used for the identification of the device whenever possible to minimize errors in records resulting from manual transcriptions. If separate barcodes for DI and PI are present, concatenate the string with DI first and in order of human readable expression on label. Data type base64Binary Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: Role.id.extension udi: A unique device identifier (UDI) on a device label a form that uses automatic identification and data capture (AIDC) technology.
carrierHRF	Σ	0..1	string	There are no (further) constraints on this element Element id Device.udiCarrier.carrierHRF Short description UDI Human Readable Barcode String Alternate names Human Readable Form Definition The full UDI carrier as the human readable form (HRF) representation of the barcode string as printed on the packaging of the device. Comments If separate barcodes for DI and PI are present, concatenate the string with DI first and in order of human readable expression on label. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: Role.id.extension udi: A unique device identifier (UDI) on a device label in plain text
entryType		0..1	codeBinding	There are no (further) constraints on this element Element id Device.udiCarrier.entryType Short description barcode \| rfid \| manual + Definition A coded entry to indicate how the data was entered. Requirements Supports a way to distinguish hand entered from machine read data. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type code Binding Codes to identify how UDI data was entered. UDIEntryType (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: NA
status	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element id Device.status Short description active \| inactive \| entered-in-error \| unknown Definition Status of the Device availability. Comments This element is labeled as a modifier because the status contains the codes inactive and entered-in-error that mark the device (record)as not currently valid. Data type code Binding The availability status of the device. FHIRDeviceStatus (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a w5: FiveWs.status rim: .statusCode
statusReason		0..*	CodeableConceptBinding	There are no (further) constraints on this element Element id Device.statusReason Short description online \| paused \| standby \| offline \| not-ready \| transduc-discon \| hw-discon \| off Definition Reason for the dtatus of the Device availability. Comments Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination. Data type CodeableConcept Binding The availability status reason of the device. FHIRDeviceStatusReason (extensible) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD w5: FiveWs.status
distinctIdentifier		0..1	string	There are no (further) constraints on this element Element id Device.distinctIdentifier Short description The distinct identification string Alternate names Distinct Identification Code (DIC) Definition The distinct identification string as required by regulation for a human cell, tissue, or cellular and tissue-based product. Comments For example, this applies to devices in the United States regulated under Code of Federal Regulation 21CFR§1271.290(c). Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a w5: FiveWs.what[x] rim: .lotNumberText udi: The lot or batch number within which a device was manufactured - which is a component of the production identifier (PI), a conditional, variable portion of a UDI.
manufacturer		0..1	string	There are no (further) constraints on this element Element id Device.manufacturer Short description Name of device manufacturer Definition A name of the manufacturer. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a w5: FiveWs.what[x] rim: .playedRole[typeCode=MANU].scoper.name udi: N/A
manufactureDate		0..1	dateTime	There are no (further) constraints on this element Element id Device.manufactureDate Short description Date when the device was made Definition The date and time when the device was manufactured. Data type dateTime Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a w5: FiveWs.what[x] rim: .existenceTime.low udi: The date a specific device was manufactured - which is a component of the production identifier (PI), a conditional, variable portion of a UDI. For FHIR, The datetime syntax must converted to YYYY-MM-DD[THH:MM:SS]. If hour is present, the minutes and seconds should both be set to “00”.
expirationDate		0..1	dateTime	There are no (further) constraints on this element Element id Device.expirationDate Short description Date and time of expiry of this device (if applicable) Definition The date and time beyond which this device is no longer valid or should not be used (if applicable). Data type dateTime Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a w5: FiveWs.what[x] rim: .expirationTime udi: the expiration date of a specific device - which is a component of the production identifier (PI), a conditional, variable portion of a UDI. For FHIR, The datetime syntax must converted to YYYY-MM-DD[THH:MM:SS]. If hour is present, the minutes and seconds should both be set to “00”.
lotNumber		0..1	string	There are no (further) constraints on this element Element id Device.lotNumber Short description Lot number of manufacture Definition Lot number assigned by the manufacturer. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a w5: FiveWs.what[x] rim: .lotNumberText udi: The lot or batch number within which a device was manufactured - which is a component of the production identifier (PI), a conditional, variable portion of a UDI.
serialNumber		0..1	string	There are no (further) constraints on this element Element id Device.serialNumber Short description Serial number assigned by the manufacturer Definition The serial number assigned by the organization when the device was manufactured. Comments Alphanumeric Maximum 20. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a w5: FiveWs.what[x] rim: .playedRole[typeCode=MANU].id
deviceName		0..*	BackboneElement	There are no (further) constraints on this element Element id Device.deviceName Short description The name of the device as given by the manufacturer Definition This represents the manufacturer's name of the device as provided by the device, from a UDI label, or by a person describing the Device. This typically would be used when a person provides the name(s) or when the device represents one of the names available from DeviceDefinition. Data type BackboneElement Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
id		0..1	string	There are no (further) constraints on this element Element id Device.deviceName.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Device.deviceName.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id Device.deviceName.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
name		1..1	string	There are no (further) constraints on this element Element id Device.deviceName.name Short description The name of the device Alternate names Σ Definition The name of the device. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
type		1..1	codeBinding	There are no (further) constraints on this element Element id Device.deviceName.type Short description udi-label-name \| user-friendly-name \| patient-reported-name \| manufacturer-name \| model-name \| other Definition The type of deviceName. UDILabelName \| UserFriendlyName \| PatientReportedName \| ManufactureDeviceName \| ModelName. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type code Binding The type of name the device is referred by. DeviceNameType (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a w5: FiveWs.what[x] rim: .playedRole[typeCode=MANU].code
modelNumber		0..1	string	There are no (further) constraints on this element Element id Device.modelNumber Short description The model number for the device Definition The model number for the device. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a w5: FiveWs.what[x] rim: .softwareName (included as part)
partNumber		0..1	string	There are no (further) constraints on this element Element id Device.partNumber Short description The part number of the device Definition The part number of the device. Comments Alphanumeric Maximum 20. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a w5: FiveWs.what[x] rim: .playedRole[typeCode=MANU].id
type		0..1	CodeableConceptBinding	Element id Device.type Short description The kind or type of device Definition The kind or type of device. Comments Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination. Data type CodeableConcept Binding A code from the SNOMED Clinical Terminology UK coding system that describes a type of device. (extensible) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD
specialization		0..*	BackboneElement	There are no (further) constraints on this element Element id Device.specialization Short description The capabilities supported on a device, the standards to which the device conforms for a particular purpose, and used for the communication Definition The capabilities supported on a device, the standards to which the device conforms for a particular purpose, and used for the communication. Data type BackboneElement Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
id		0..1	string	There are no (further) constraints on this element Element id Device.specialization.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Device.specialization.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id Device.specialization.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
systemType		1..1	CodeableConcept	There are no (further) constraints on this element Element id Device.specialization.systemType Short description The standard that is used to operate and communicate Alternate names Σ Definition The standard that is used to operate and communicate. Comments Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination. Data type CodeableConcept Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD
version		0..1	string	There are no (further) constraints on this element Element id Device.specialization.version Short description The version of the standard that is used to operate and communicate Definition The version of the standard that is used to operate and communicate. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a w5: FiveWs.what[x]
version		0..*	BackboneElement	There are no (further) constraints on this element Element id Device.version Short description The actual design of the device or software version running on the device Definition The actual design of the device or software version running on the device. Data type BackboneElement Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
id		0..1	string	There are no (further) constraints on this element Element id Device.version.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Device.version.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id Device.version.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
type		0..1	CodeableConcept	There are no (further) constraints on this element Element id Device.version.type Short description The type of the device version Alternate names Σ Definition The type of the device version. Comments Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination. Data type CodeableConcept Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD
component		0..1	Identifier	There are no (further) constraints on this element Element id Device.version.component Short description A single component of the device version Definition A single component of the device version. Data type Identifier Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: CX / EI (occasionally, more often EI maps to a resource id or a URL) rim: II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd: Identifier w5: FiveWs.what[x]
id		0..1	string	There are no (further) constraints on this element Element id Device.version.component.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Device.version.component.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
use	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element id Device.version.component.use Short description usual \| official \| temp \| secondary \| old (If known) Definition The purpose of this identifier. Requirements Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. Comments Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. Data type code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: N/A rim: Role.code or implied by context
type	Σ	0..1	CodeableConceptBinding	There are no (further) constraints on this element Element id Device.version.component.type Short description Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. Requirements Allows users to make use of identifiers when the identifier system is not known. Comments This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. Data type CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD v2: CX.5 rim: Role.code or implied by context
system	Σ	0..1	uri	There are no (further) constraints on this element Element id Device.version.component.system Short description The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique. Requirements There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. Comments Identifier.system is always case sensitive. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General http://www.acme.com/identifiers/patient Mappings rim: n/a v2: CX.4 / EI-2-4 rim: II.root or Role.id.root servd: ./IdentifierType
value	Σ	0..1	string	There are no (further) constraints on this element Element id Device.version.component.value Short description The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system. Comments If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General 123456 Mappings rim: n/a v2: CX.1 / EI.1 rim: II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd: ./Value
period	Σ I	0..1	Period	There are no (further) constraints on this element Element id Device.version.component.period Short description Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use. Comments A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration. Data type Period Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` per-1: If present, start SHALL have a lower value than end `start.hasValue().not() or end.hasValue().not() or (start <= end)` Mappings rim: n/a v2: DR rim: IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"] v2: CX.7 + CX.8 rim: Role.effectiveTime or implied by context servd: ./StartDate and ./EndDate
assigner	Σ I	0..1	Reference()	Element id Device.version.component.assigner Short description Organization that issued id (may be just text) Definition Organization that issued/manages the identifier. Comments The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. Data type Reference() Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2: CX.4 / (CX.4,CX.9,CX.10) rim: II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd: ./IdentifierIssuingAuthority
value		1..1	string	There are no (further) constraints on this element Element id Device.version.value Short description The version text Definition The version text. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
property		0..*	BackboneElement	There are no (further) constraints on this element Element id Device.property Short description The actual configuration settings of a device as it actually operates, e.g., regulation status, time properties Definition The actual configuration settings of a device as it actually operates, e.g., regulation status, time properties. Data type BackboneElement Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
id		0..1	string	There are no (further) constraints on this element Element id Device.property.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Device.property.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id Device.property.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
type		1..1	CodeableConcept	There are no (further) constraints on this element Element id Device.property.type Short description Code that specifies the property DeviceDefinitionPropetyCode (Extensible) Definition Code that specifies the property DeviceDefinitionPropetyCode (Extensible). Comments Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination. Data type CodeableConcept Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD
valueQuantity	I	0..*	Quantity	There are no (further) constraints on this element Element id Device.property.valueQuantity Short description Property value as a quantity Definition Property value as a quantity. Comments The context of use may frequently define what kind of quantity this is and therefore what kind of units can be used. The context of use may also restrict the values for the comparator. Data type Quantity Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` qty-3: If a code for the unit is present, the system SHALL also be present `code.empty() or system.exists()` Mappings rim: n/a v2: SN (see also Range) or CQ rim: PQ, IVL<PQ>, MO, CO, depending on the values
valueCode		0..*	CodeableConcept	There are no (further) constraints on this element Element id Device.property.valueCode Short description Property value as a code, e.g., NTP4 (synced to NTP) Definition Property value as a code, e.g., NTP4 (synced to NTP). Comments Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination. Data type CodeableConcept Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD
patient	I	0..1	Reference()	Element id Device.patient Short description Patient to whom Device is affixed Definition Patient information, If the device is affixed to a person. Requirements If the device is implanted in a patient, then need to associate the device to the patient. Comments References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository. Data type Reference() Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity) w5: FiveWs.subject[x] rim: .playedRole[typeCode=USED].scoper.playedRole[typeCode=PAT] w5: FiveWs.subject
id		0..1	string	There are no (further) constraints on this element Element id Device.patient.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Device.patient.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
reference	Σ I	0..1	string	There are no (further) constraints on this element Element id Device.patient.reference Short description Literal reference, Relative, internal or absolute URL Definition A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources. Comments Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: N/A
type	Σ	0..1	uriBinding	There are no (further) constraints on this element Element id Device.patient.type Short description Type the reference refers to (e.g. "Patient") Definition The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent. The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources). Comments This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified. Data type uri Binding Aa resource (or, for logical models, the URI of the logical model). ResourceType (extensible) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: N/A
identifier	Σ	0..1	Identifier	There are no (further) constraints on this element Element id Device.patient.identifier Short description Logical reference, when literal reference is not known Definition An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference. Comments When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it. Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation\|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any). Data type Identifier Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: CX / EI (occasionally, more often EI maps to a resource id or a URL) rim: II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd: Identifier rim: .identifier
id		0..1	string	There are no (further) constraints on this element Element id Device.patient.identifier.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Device.patient.identifier.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
use	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element id Device.patient.identifier.use Short description usual \| official \| temp \| secondary \| old (If known) Definition The purpose of this identifier. Requirements Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. Comments Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. Data type code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: N/A rim: Role.code or implied by context
type	Σ	0..1	CodeableConceptBinding	There are no (further) constraints on this element Element id Device.patient.identifier.type Short description Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. Requirements Allows users to make use of identifiers when the identifier system is not known. Comments This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. Data type CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD v2: CX.5 rim: Role.code or implied by context
system	Σ	0..1	uri	There are no (further) constraints on this element Element id Device.patient.identifier.system Short description The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique. Requirements There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. Comments Identifier.system is always case sensitive. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General http://www.acme.com/identifiers/patient Mappings rim: n/a v2: CX.4 / EI-2-4 rim: II.root or Role.id.root servd: ./IdentifierType
value	Σ	0..1	string	There are no (further) constraints on this element Element id Device.patient.identifier.value Short description The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system. Comments If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General 123456 Mappings rim: n/a v2: CX.1 / EI.1 rim: II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd: ./Value
period	Σ I	0..1	Period	There are no (further) constraints on this element Element id Device.patient.identifier.period Short description Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use. Comments A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration. Data type Period Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` per-1: If present, start SHALL have a lower value than end `start.hasValue().not() or end.hasValue().not() or (start <= end)` Mappings rim: n/a v2: DR rim: IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"] v2: CX.7 + CX.8 rim: Role.effectiveTime or implied by context servd: ./StartDate and ./EndDate
assigner	Σ I	0..1	Reference()	Element id Device.patient.identifier.assigner Short description Organization that issued id (may be just text) Definition Organization that issued/manages the identifier. Comments The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. Data type Reference() Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2: CX.4 / (CX.4,CX.9,CX.10) rim: II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd: ./IdentifierIssuingAuthority
display	Σ	0..1	string	There are no (further) constraints on this element Element id Device.patient.display Short description Text alternative for the resource Definition Plain text narrative that identifies the resource in addition to the resource reference. Comments This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: N/A
owner	I	0..1	Reference()	Element id Device.owner Short description Organization responsible for device Definition An organization that is responsible for the provision and ongoing maintenance of the device. Comments References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository. Data type Reference() Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity) w5: FiveWs.source rim: .playedRole[typeCode=OWN].scoper
id		0..1	string	There are no (further) constraints on this element Element id Device.owner.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Device.owner.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
reference	Σ I	0..1	string	There are no (further) constraints on this element Element id Device.owner.reference Short description Literal reference, Relative, internal or absolute URL Definition A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources. Comments Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: N/A
type	Σ	0..1	uriBinding	There are no (further) constraints on this element Element id Device.owner.type Short description Type the reference refers to (e.g. "Patient") Definition The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent. The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources). Comments This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified. Data type uri Binding Aa resource (or, for logical models, the URI of the logical model). ResourceType (extensible) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: N/A
identifier	Σ	0..1	Identifier	There are no (further) constraints on this element Element id Device.owner.identifier Short description Logical reference, when literal reference is not known Definition An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference. Comments When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it. Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation\|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any). Data type Identifier Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: CX / EI (occasionally, more often EI maps to a resource id or a URL) rim: II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd: Identifier rim: .identifier
id		0..1	string	There are no (further) constraints on this element Element id Device.owner.identifier.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Device.owner.identifier.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
use	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element id Device.owner.identifier.use Short description usual \| official \| temp \| secondary \| old (If known) Definition The purpose of this identifier. Requirements Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. Comments Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. Data type code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: N/A rim: Role.code or implied by context
type	Σ	0..1	CodeableConceptBinding	There are no (further) constraints on this element Element id Device.owner.identifier.type Short description Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. Requirements Allows users to make use of identifiers when the identifier system is not known. Comments This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. Data type CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD v2: CX.5 rim: Role.code or implied by context
system	Σ	0..1	uri	There are no (further) constraints on this element Element id Device.owner.identifier.system Short description The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique. Requirements There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. Comments Identifier.system is always case sensitive. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General http://www.acme.com/identifiers/patient Mappings rim: n/a v2: CX.4 / EI-2-4 rim: II.root or Role.id.root servd: ./IdentifierType
value	Σ	0..1	string	There are no (further) constraints on this element Element id Device.owner.identifier.value Short description The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system. Comments If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General 123456 Mappings rim: n/a v2: CX.1 / EI.1 rim: II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd: ./Value
period	Σ I	0..1	Period	There are no (further) constraints on this element Element id Device.owner.identifier.period Short description Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use. Comments A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration. Data type Period Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` per-1: If present, start SHALL have a lower value than end `start.hasValue().not() or end.hasValue().not() or (start <= end)` Mappings rim: n/a v2: DR rim: IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"] v2: CX.7 + CX.8 rim: Role.effectiveTime or implied by context servd: ./StartDate and ./EndDate
assigner	Σ I	0..1	Reference()	Element id Device.owner.identifier.assigner Short description Organization that issued id (may be just text) Definition Organization that issued/manages the identifier. Comments The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. Data type Reference() Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2: CX.4 / (CX.4,CX.9,CX.10) rim: II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd: ./IdentifierIssuingAuthority
display	Σ	0..1	string	There are no (further) constraints on this element Element id Device.owner.display Short description Text alternative for the resource Definition Plain text narrative that identifies the resource in addition to the resource reference. Comments This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: N/A
contact	I	0..*	ContactPoint	There are no (further) constraints on this element Element id Device.contact Short description Details for human/organization for support Definition Contact details for an organization or a particular human that is responsible for the device. Comments used for troubleshooting etc. Data type ContactPoint Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` cpt-2: A system is required if a value is provided. `value.empty() or system.exists()` Mappings rim: n/a v2: XTN rim: TEL servd: ContactPoint w5: FiveWs.source rim: .scopedRole[typeCode=CON].player
location	I	0..1	Reference()	Element id Device.location Short description Where the device is found Definition The place where the device can be found. Requirements Device.location can be used to track device location. Comments References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository. Data type Reference() Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity) w5: FiveWs.where[x] rim: .playedRole[typeCode=LOCE].scoper
id		0..1	string	There are no (further) constraints on this element Element id Device.location.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Device.location.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
reference	Σ I	0..1	string	There are no (further) constraints on this element Element id Device.location.reference Short description Literal reference, Relative, internal or absolute URL Definition A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources. Comments Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: N/A
type	Σ	0..1	uriBinding	There are no (further) constraints on this element Element id Device.location.type Short description Type the reference refers to (e.g. "Patient") Definition The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent. The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources). Comments This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified. Data type uri Binding Aa resource (or, for logical models, the URI of the logical model). ResourceType (extensible) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: N/A
identifier	Σ	0..1	Identifier	There are no (further) constraints on this element Element id Device.location.identifier Short description Logical reference, when literal reference is not known Definition An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference. Comments When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it. Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation\|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any). Data type Identifier Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: CX / EI (occasionally, more often EI maps to a resource id or a URL) rim: II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd: Identifier rim: .identifier
id		0..1	string	There are no (further) constraints on this element Element id Device.location.identifier.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Device.location.identifier.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
use	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element id Device.location.identifier.use Short description usual \| official \| temp \| secondary \| old (If known) Definition The purpose of this identifier. Requirements Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. Comments Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. Data type code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: N/A rim: Role.code or implied by context
type	Σ	0..1	CodeableConceptBinding	There are no (further) constraints on this element Element id Device.location.identifier.type Short description Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. Requirements Allows users to make use of identifiers when the identifier system is not known. Comments This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. Data type CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD v2: CX.5 rim: Role.code or implied by context
system	Σ	0..1	uri	There are no (further) constraints on this element Element id Device.location.identifier.system Short description The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique. Requirements There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. Comments Identifier.system is always case sensitive. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General http://www.acme.com/identifiers/patient Mappings rim: n/a v2: CX.4 / EI-2-4 rim: II.root or Role.id.root servd: ./IdentifierType
value	Σ	0..1	string	There are no (further) constraints on this element Element id Device.location.identifier.value Short description The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system. Comments If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General 123456 Mappings rim: n/a v2: CX.1 / EI.1 rim: II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd: ./Value
period	Σ I	0..1	Period	There are no (further) constraints on this element Element id Device.location.identifier.period Short description Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use. Comments A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration. Data type Period Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` per-1: If present, start SHALL have a lower value than end `start.hasValue().not() or end.hasValue().not() or (start <= end)` Mappings rim: n/a v2: DR rim: IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"] v2: CX.7 + CX.8 rim: Role.effectiveTime or implied by context servd: ./StartDate and ./EndDate
assigner	Σ I	0..1	Reference()	Element id Device.location.identifier.assigner Short description Organization that issued id (may be just text) Definition Organization that issued/manages the identifier. Comments The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. Data type Reference() Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2: CX.4 / (CX.4,CX.9,CX.10) rim: II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd: ./IdentifierIssuingAuthority
display	Σ	0..1	string	There are no (further) constraints on this element Element id Device.location.display Short description Text alternative for the resource Definition Plain text narrative that identifies the resource in addition to the resource reference. Comments This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: N/A
url		0..1	uri	There are no (further) constraints on this element Element id Device.url Short description Network address to contact device Definition A network address on which the device may be contacted directly. Comments If the device is running a FHIR server, the network address should be the Base URL from which a conformance statement may be retrieved. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a w5: FiveWs.where[x] rim: .telecom
note		0..*	Annotation	There are no (further) constraints on this element Element id Device.note Short description Device notes and comments Definition Descriptive information, usage information or implantation information that is not captured in an existing element. Comments For systems that do not have structured annotations, they can simply communicate a single annotation with no author or time. This element may need to be included in narrative because of the potential for modifying information. Annotations SHOULD NOT be used to communicate "modifying" information that could be computable. (This is a SHOULD because enforcing user behavior is nearly impossible). Data type Annotation Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: N/A rim: Act rim: .text
id		0..1	string	There are no (further) constraints on this element Element id Device.note.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Device.note.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
author[x]	Σ	0..1		There are no (further) constraints on this element Element id Device.note.author[x] Short description Individual responsible for the annotation Definition The individual responsible for making the annotation. Comments Organization is used when there's no need for specific attribution as to who made the comment. Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: N/A rim: Act.participant[typeCode=AUT].role
authorString			string	Data type string
authorReference			Reference( \| \| \| )	Data type Reference( \| \| \| )
time	Σ	0..1	dateTime	There are no (further) constraints on this element Element id Device.note.time Short description When the annotation was made Definition Indicates when this particular annotation was made. Data type dateTime Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: N/A rim: Act.effectiveTime
text	Σ	1..1	markdown	There are no (further) constraints on this element Element id Device.note.text Short description The annotation - text content (as markdown) Definition The text of the annotation in markdown format. Comments Systems are not required to have markdown support, so the text should be readable without markdown processing. The markdown syntax is GFM - see https://github.github.com/gfm/ Data type markdown Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: N/A rim: Act.text
safety	Σ	0..*	CodeableConcept	There are no (further) constraints on this element Element id Device.safety Short description Safety Characteristics of Device Definition Provides additional safety characteristics about a medical device. For example devices containing latex. Comments Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination. Data type CodeableConcept Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD rim: NA
parent	I	0..1	Reference()	Element id Device.parent Short description The parent device Definition The parent device. Comments References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository. Data type Reference() Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity)
id		0..1	string	There are no (further) constraints on this element Element id Device.parent.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Device.parent.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
reference	Σ I	0..1	string	There are no (further) constraints on this element Element id Device.parent.reference Short description Literal reference, Relative, internal or absolute URL Definition A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources. Comments Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: N/A
type	Σ	0..1	uriBinding	There are no (further) constraints on this element Element id Device.parent.type Short description Type the reference refers to (e.g. "Patient") Definition The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent. The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources). Comments This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified. Data type uri Binding Aa resource (or, for logical models, the URI of the logical model). ResourceType (extensible) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: N/A
identifier	Σ	0..1	Identifier	There are no (further) constraints on this element Element id Device.parent.identifier Short description Logical reference, when literal reference is not known Definition An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference. Comments When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it. Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation\|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any). Data type Identifier Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: CX / EI (occasionally, more often EI maps to a resource id or a URL) rim: II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd: Identifier rim: .identifier
id		0..1	string	There are no (further) constraints on this element Element id Device.parent.identifier.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Device.parent.identifier.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
use	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element id Device.parent.identifier.use Short description usual \| official \| temp \| secondary \| old (If known) Definition The purpose of this identifier. Requirements Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. Comments Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. Data type code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: N/A rim: Role.code or implied by context
type	Σ	0..1	CodeableConceptBinding	There are no (further) constraints on this element Element id Device.parent.identifier.type Short description Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. Requirements Allows users to make use of identifiers when the identifier system is not known. Comments This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. Data type CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD v2: CX.5 rim: Role.code or implied by context
system	Σ	0..1	uri	There are no (further) constraints on this element Element id Device.parent.identifier.system Short description The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique. Requirements There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. Comments Identifier.system is always case sensitive. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General http://www.acme.com/identifiers/patient Mappings rim: n/a v2: CX.4 / EI-2-4 rim: II.root or Role.id.root servd: ./IdentifierType
value	Σ	0..1	string	There are no (further) constraints on this element Element id Device.parent.identifier.value Short description The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system. Comments If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General 123456 Mappings rim: n/a v2: CX.1 / EI.1 rim: II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd: ./Value
period	Σ I	0..1	Period	There are no (further) constraints on this element Element id Device.parent.identifier.period Short description Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use. Comments A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration. Data type Period Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` per-1: If present, start SHALL have a lower value than end `start.hasValue().not() or end.hasValue().not() or (start <= end)` Mappings rim: n/a v2: DR rim: IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"] v2: CX.7 + CX.8 rim: Role.effectiveTime or implied by context servd: ./StartDate and ./EndDate
assigner	Σ I	0..1	Reference()	Element id Device.parent.identifier.assigner Short description Organization that issued id (may be just text) Definition Organization that issued/manages the identifier. Comments The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. Data type Reference() Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2: CX.4 / (CX.4,CX.9,CX.10) rim: II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd: ./IdentifierIssuingAuthority
display	Σ	0..1	string	There are no (further) constraints on this element Element id Device.parent.display Short description Text alternative for the resource Definition Plain text narrative that identifies the resource in addition to the resource reference. Comments This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: N/A

TESTmedlist (List)	I		cstestList	There are no (further) constraints on this element Element id List Short description A list is a curated collection of resources Alternate names Collection, WorkingList, Organizer Definition A list is a curated collection of resources. Data type cstestList Constraints dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources `contained.contained.empty()` dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated `contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()` dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource `contained.where((('#'+id in (%resource.descendants().reference \| %resource.descendants().as(canonical) \| %resource.descendants().as(uri) \| %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty()` dom-6: A resource should have narrative for robust management text.`div`.exists() dom-5: If a resource is contained in another resource, it SHALL NOT have a security label `contained.meta.security.empty()` lst-3: An entry date can only be used if the mode of the list is "working" `mode = 'working' or entry.date.empty()` lst-2: The deleted flag can only be used if the mode of the list is "changes" `mode = 'changes' or entry.deleted.empty()` lst-1: A list can only have an emptyReason if it is empty `emptyReason.empty() or entry.empty()` Mappings rim: Entity. Role, or Act rim: Act[classCode<ORG,moodCode=EVN]
id	Σ	0..1	string	There are no (further) constraints on this element Element id List.id Short description Logical id of this artifact Definition The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes. Comments The only time that a resource does not have an id is when it is being submitted to the server using a create operation. Data type string
meta	Σ	0..1	Meta	There are no (further) constraints on this element Element id List.meta Short description Metadata about the resource Definition The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource. Data type Meta Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: N/A
implicitRules	Σ ?!	0..1	uri	There are no (further) constraints on this element Element id List.implicitRules Short description A set of rules under which this content was created Definition A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc. Comments Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
language		0..1	codeBinding	There are no (further) constraints on this element Element id List.language Short description Language of the resource content Definition The base language in which the resource is written. Comments Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute). Data type code Binding A human language. CommonLanguages (preferred) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
text		0..1	Narrative	There are no (further) constraints on this element Element id List.text Short description Text summary of the resource, for human interpretation Alternate names narrative, html, xhtml, display Definition A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety. Comments Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later. Data type Narrative Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: N/A rim: Act.text?
contained		0..*	Resource	There are no (further) constraints on this element Element id List.contained Short description Contained, inline Resources Alternate names inline resources, anonymous resources, contained resources Definition These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope. Comments This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels. Data type Resource Mappings rim: Entity. Role, or Act rim: N/A
extension	I	0..*	Extension	There are no (further) constraints on this element Element id List.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
careSettingType	I	0..1	Extension	There are no (further) constraints on this element Element id List.extension:careSettingType Short description An extension to carry the Care setting type. Alternate names extensions, user content Definition An extension to carry the Care setting type. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Extension URL https://fhir.hl7.org.uk/StructureDefinition/Extension-cstest-CareSettingType Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
listWarningCode	I	0..*	Extension	There are no (further) constraints on this element Element id List.extension:listWarningCode Short description To capture warnings that the list may be incomplete. Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Extension URL https://fhir.hl7.org.uk/StructureDefinition/Extension-cstest-ListWarningCode Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
relatedProblemHeader	I	0..1	Extension	There are no (further) constraints on this element Element id List.extension:relatedProblemHeader Short description A reference to another related problem header condition (target) whose relationship is defined by the relationship type code. Alternate names extensions, user content Definition A reference to another related problem header condition (target) whose relationship is defined by the relationship type code. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Extension URL https://fhir.hl7.org.uk/StructureDefinition/Extension-cstest-RelatedProblemHeader Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	?! I	0..*	Extension	There are no (further) constraints on this element Element id List.modifierExtension Short description Extensions that cannot be ignored Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
identifier		0..*	Identifier	There are no (further) constraints on this element Element id List.identifier Short description Business identifier Definition Identifier for the List assigned for business purposes outside the context of FHIR. Data type Identifier Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: CX / EI (occasionally, more often EI maps to a resource id or a URL) rim: II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd: Identifier w5: FiveWs.identifier rim: .id
id		0..1	string	There are no (further) constraints on this element Element id List.identifier.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id List.identifier.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
use	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element id List.identifier.use Short description usual \| official \| temp \| secondary \| old (If known) Definition The purpose of this identifier. Requirements Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. Comments Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. Data type code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: N/A rim: Role.code or implied by context
type	Σ	0..1	CodeableConceptBinding	There are no (further) constraints on this element Element id List.identifier.type Short description Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. Requirements Allows users to make use of identifiers when the identifier system is not known. Comments This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. Data type CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD v2: CX.5 rim: Role.code or implied by context
system	Σ	0..1	uri	There are no (further) constraints on this element Element id List.identifier.system Short description The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique. Requirements There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. Comments Identifier.system is always case sensitive. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General http://www.acme.com/identifiers/patient Mappings rim: n/a v2: CX.4 / EI-2-4 rim: II.root or Role.id.root servd: ./IdentifierType
value	Σ	0..1	string	There are no (further) constraints on this element Element id List.identifier.value Short description The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system. Comments If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General 123456 Mappings rim: n/a v2: CX.1 / EI.1 rim: II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd: ./Value
period	Σ I	0..1	Period	There are no (further) constraints on this element Element id List.identifier.period Short description Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use. Comments A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration. Data type Period Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` per-1: If present, start SHALL have a lower value than end `start.hasValue().not() or end.hasValue().not() or (start <= end)` Mappings rim: n/a v2: DR rim: IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"] v2: CX.7 + CX.8 rim: Role.effectiveTime or implied by context servd: ./StartDate and ./EndDate
assigner	Σ I	0..1	Reference(https://fhir.hl7.org.uk/StructureDefinition/cstest-Organization)	There are no (further) constraints on this element Element id List.identifier.assigner Short description Organization that issued id (may be just text) Definition Organization that issued/manages the identifier. Comments The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. Data type Reference(https://fhir.hl7.org.uk/StructureDefinition/cstest-Organization) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2: CX.4 / (CX.4,CX.9,CX.10) rim: II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd: ./IdentifierIssuingAuthority
status	S Σ ?!	1..1	codeBinding	There are no (further) constraints on this element Element id List.status Short description current \| retired \| entered-in-error Definition Indicates the current state of this list. Comments This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid. Data type code Binding The current state of the list. ListStatus (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a w5: FiveWs.status rim: .status[current=active;retired=obsolete;entered-in-error=nullified]
mode	S Σ ?!	1..1	codeBinding	There are no (further) constraints on this element Element id List.mode Short description working \| snapshot \| changes Definition How this list was prepared - whether it is a working list that is suitable for being maintained on an ongoing basis, or if it represents a snapshot of a list of items from another source, or whether it is a prepared list where items may be marked as added, modified or deleted. Requirements Lists are used in various ways, and it must be known in what way it is safe to use them. Comments This element is labeled as a modifier because a change list must not be misunderstood as a complete list. Data type code Binding The processing mode that applies to this list. ListMode (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a w5: FiveWs.class rim: .outBoundRelationship[typeCode=COMP].target[classCode=OBS"].value
title	Σ	0..1	string	There are no (further) constraints on this element Element id List.title Short description Descriptive name for the list Definition A label for the list assigned by the author. Requirements Allows customization beyond just the code identifying the kind of list. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General Dr. Jane's Patients Mappings rim: n/a rim: .title
code	S Σ	1..1	CodeableConceptBindingFixed Value	Element id List.code Short description What the purpose of this list is Definition This code defines the purpose of the list - why it was created. Requirements Lists often contain subsets of resources rather than an exhaustive list. The code identifies what type of subset is included. Comments If there is no code, the purpose of the list is implied where it is used, such as in a document section using Document.section.code. Data type CodeableConcept Binding What the purpose of a list is. https://fhir.hl7.org.uk/ValueSet/cstest-ListCode (extensible) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Fixed value { "coding": [ { "system": "http://snomed.info/sct", "code": "933361000000108", "display": "Medications and medical devices" } ] } Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD w5: FiveWs.what[x] rim: .code
subject	S Σ I	1..1	Reference()	Element id List.subject Short description If all resources have the same subject Definition The common subject (or patient) of the resources that are in the list if there is one. Requirements The primary purpose of listing the subject explicitly is to help with finding the right list. Comments Some purely arbitrary lists do not have a common subject, so this is optional. Data type Reference() Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity) w5: FiveWs.subject[x] rim: .participation[typeCode<SUB].role (and sometimes .player) w5: FiveWs.subject
id		0..1	string	There are no (further) constraints on this element Element id List.subject.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id List.subject.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
reference	Σ I	0..1	string	There are no (further) constraints on this element Element id List.subject.reference Short description Literal reference, Relative, internal or absolute URL Definition A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources. Comments Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: N/A
type	Σ	0..1	uriBinding	There are no (further) constraints on this element Element id List.subject.type Short description Type the reference refers to (e.g. "Patient") Definition The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent. The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources). Comments This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified. Data type uri Binding Aa resource (or, for logical models, the URI of the logical model). ResourceType (extensible) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: N/A
identifier	Σ	0..1	Identifier	There are no (further) constraints on this element Element id List.subject.identifier Short description Logical reference, when literal reference is not known Definition An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference. Comments When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it. Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation\|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any). Data type Identifier Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: CX / EI (occasionally, more often EI maps to a resource id or a URL) rim: II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd: Identifier rim: .identifier
id		0..1	string	There are no (further) constraints on this element Element id List.subject.identifier.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id List.subject.identifier.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
use	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element id List.subject.identifier.use Short description usual \| official \| temp \| secondary \| old (If known) Definition The purpose of this identifier. Requirements Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. Comments Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. Data type code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: N/A rim: Role.code or implied by context
type	Σ	0..1	CodeableConceptBinding	There are no (further) constraints on this element Element id List.subject.identifier.type Short description Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. Requirements Allows users to make use of identifiers when the identifier system is not known. Comments This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. Data type CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD v2: CX.5 rim: Role.code or implied by context
system	Σ	0..1	uri	There are no (further) constraints on this element Element id List.subject.identifier.system Short description The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique. Requirements There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. Comments Identifier.system is always case sensitive. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General http://www.acme.com/identifiers/patient Mappings rim: n/a v2: CX.4 / EI-2-4 rim: II.root or Role.id.root servd: ./IdentifierType
value	Σ	0..1	string	There are no (further) constraints on this element Element id List.subject.identifier.value Short description The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system. Comments If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General 123456 Mappings rim: n/a v2: CX.1 / EI.1 rim: II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd: ./Value
period	Σ I	0..1	Period	There are no (further) constraints on this element Element id List.subject.identifier.period Short description Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use. Comments A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration. Data type Period Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` per-1: If present, start SHALL have a lower value than end `start.hasValue().not() or end.hasValue().not() or (start <= end)` Mappings rim: n/a v2: DR rim: IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"] v2: CX.7 + CX.8 rim: Role.effectiveTime or implied by context servd: ./StartDate and ./EndDate
assigner	Σ I	0..1	Reference(https://fhir.hl7.org.uk/StructureDefinition/cstest-Organization)	There are no (further) constraints on this element Element id List.subject.identifier.assigner Short description Organization that issued id (may be just text) Definition Organization that issued/manages the identifier. Comments The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. Data type Reference(https://fhir.hl7.org.uk/StructureDefinition/cstest-Organization) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2: CX.4 / (CX.4,CX.9,CX.10) rim: II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd: ./IdentifierIssuingAuthority
display	Σ	0..1	string	There are no (further) constraints on this element Element id List.subject.display Short description Text alternative for the resource Definition Plain text narrative that identifies the resource in addition to the resource reference. Comments This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: N/A
encounter	S I	0..1	Reference()	Element id List.encounter Short description Context in which list created Definition The encounter that is the context in which this list was created. Comments References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository. Data type Reference() Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity) w5: FiveWs.context rim: inboundRelationship[typeCode=COMP].source[classCode=ENC, moodCode=EVN]
id		0..1	string	There are no (further) constraints on this element Element id List.encounter.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id List.encounter.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
reference	Σ I	0..1	string	There are no (further) constraints on this element Element id List.encounter.reference Short description Literal reference, Relative, internal or absolute URL Definition A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources. Comments Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: N/A
type	Σ	0..1	uriBinding	There are no (further) constraints on this element Element id List.encounter.type Short description Type the reference refers to (e.g. "Patient") Definition The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent. The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources). Comments This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified. Data type uri Binding Aa resource (or, for logical models, the URI of the logical model). ResourceType (extensible) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: N/A
identifier	Σ	0..1	Identifier	There are no (further) constraints on this element Element id List.encounter.identifier Short description Logical reference, when literal reference is not known Definition An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference. Comments When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it. Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation\|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any). Data type Identifier Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: CX / EI (occasionally, more often EI maps to a resource id or a URL) rim: II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd: Identifier rim: .identifier
id		0..1	string	There are no (further) constraints on this element Element id List.encounter.identifier.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id List.encounter.identifier.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
use	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element id List.encounter.identifier.use Short description usual \| official \| temp \| secondary \| old (If known) Definition The purpose of this identifier. Requirements Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. Comments Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. Data type code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: N/A rim: Role.code or implied by context
type	Σ	0..1	CodeableConceptBinding	There are no (further) constraints on this element Element id List.encounter.identifier.type Short description Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. Requirements Allows users to make use of identifiers when the identifier system is not known. Comments This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. Data type CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD v2: CX.5 rim: Role.code or implied by context
system	Σ	0..1	uri	There are no (further) constraints on this element Element id List.encounter.identifier.system Short description The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique. Requirements There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. Comments Identifier.system is always case sensitive. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General http://www.acme.com/identifiers/patient Mappings rim: n/a v2: CX.4 / EI-2-4 rim: II.root or Role.id.root servd: ./IdentifierType
value	Σ	0..1	string	There are no (further) constraints on this element Element id List.encounter.identifier.value Short description The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system. Comments If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General 123456 Mappings rim: n/a v2: CX.1 / EI.1 rim: II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd: ./Value
period	Σ I	0..1	Period	There are no (further) constraints on this element Element id List.encounter.identifier.period Short description Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use. Comments A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration. Data type Period Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` per-1: If present, start SHALL have a lower value than end `start.hasValue().not() or end.hasValue().not() or (start <= end)` Mappings rim: n/a v2: DR rim: IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"] v2: CX.7 + CX.8 rim: Role.effectiveTime or implied by context servd: ./StartDate and ./EndDate
assigner	Σ I	0..1	Reference(https://fhir.hl7.org.uk/StructureDefinition/cstest-Organization)	There are no (further) constraints on this element Element id List.encounter.identifier.assigner Short description Organization that issued id (may be just text) Definition Organization that issued/manages the identifier. Comments The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. Data type Reference(https://fhir.hl7.org.uk/StructureDefinition/cstest-Organization) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2: CX.4 / (CX.4,CX.9,CX.10) rim: II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd: ./IdentifierIssuingAuthority
display	Σ	0..1	string	There are no (further) constraints on this element Element id List.encounter.display Short description Text alternative for the resource Definition Plain text narrative that identifies the resource in addition to the resource reference. Comments This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: N/A
date	Σ	0..1	dateTime	There are no (further) constraints on this element Element id List.date Short description When the list was prepared Definition The date that the list was prepared. Requirements Identifies how current the list is which affects relevance. Comments The actual important date is the date of currency of the resources that were summarized, but it is usually assumed that these are current when the preparation occurs. Data type dateTime Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a w5: FiveWs.recorded rim: .participation[typeCode<AUT].time[type=TS]
source	S Σ I	0..1	Reference(cstestDevice)	Element id List.source Short description Who and/or what defined the list contents (aka Author) Alternate names Author Definition The entity responsible for deciding what the contents of the list were. Where the list was created by a human, this is the same as the author of the list. Requirements Allows follow-up as well as context. Comments The primary source is the entity that made the decisions what items are in the list. This may be software or user. Data type Reference(cstestDevice) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity) w5: FiveWs.author rim: .participation[typeCode<AUT].role[classCode=REL].player[classCode=PSN,determinerCode=INST] or .participation[typeCode<AUT].role[classCode=REL].player[classCode=DEV,determinerCode=INST]
id		0..1	string	There are no (further) constraints on this element Element id List.source.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id List.source.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
reference	Σ I	0..1	string	There are no (further) constraints on this element Element id List.source.reference Short description Literal reference, Relative, internal or absolute URL Definition A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources. Comments Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: N/A
type	Σ	0..1	uriBinding	There are no (further) constraints on this element Element id List.source.type Short description Type the reference refers to (e.g. "Patient") Definition The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent. The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources). Comments This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified. Data type uri Binding Aa resource (or, for logical models, the URI of the logical model). ResourceType (extensible) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: N/A
identifier	Σ	0..1	Identifier	There are no (further) constraints on this element Element id List.source.identifier Short description Logical reference, when literal reference is not known Definition An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference. Comments When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it. Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation\|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any). Data type Identifier Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: CX / EI (occasionally, more often EI maps to a resource id or a URL) rim: II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd: Identifier rim: .identifier
id		0..1	string	There are no (further) constraints on this element Element id List.source.identifier.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id List.source.identifier.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
use	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element id List.source.identifier.use Short description usual \| official \| temp \| secondary \| old (If known) Definition The purpose of this identifier. Requirements Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. Comments Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. Data type code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: N/A rim: Role.code or implied by context
type	Σ	0..1	CodeableConceptBinding	There are no (further) constraints on this element Element id List.source.identifier.type Short description Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. Requirements Allows users to make use of identifiers when the identifier system is not known. Comments This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. Data type CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD v2: CX.5 rim: Role.code or implied by context
system	Σ	0..1	uri	There are no (further) constraints on this element Element id List.source.identifier.system Short description The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique. Requirements There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. Comments Identifier.system is always case sensitive. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General http://www.acme.com/identifiers/patient Mappings rim: n/a v2: CX.4 / EI-2-4 rim: II.root or Role.id.root servd: ./IdentifierType
value	Σ	0..1	string	There are no (further) constraints on this element Element id List.source.identifier.value Short description The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system. Comments If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General 123456 Mappings rim: n/a v2: CX.1 / EI.1 rim: II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd: ./Value
period	Σ I	0..1	Period	There are no (further) constraints on this element Element id List.source.identifier.period Short description Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use. Comments A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration. Data type Period Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` per-1: If present, start SHALL have a lower value than end `start.hasValue().not() or end.hasValue().not() or (start <= end)` Mappings rim: n/a v2: DR rim: IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"] v2: CX.7 + CX.8 rim: Role.effectiveTime or implied by context servd: ./StartDate and ./EndDate
assigner	Σ I	0..1	Reference(https://fhir.hl7.org.uk/StructureDefinition/cstest-Organization)	There are no (further) constraints on this element Element id List.source.identifier.assigner Short description Organization that issued id (may be just text) Definition Organization that issued/manages the identifier. Comments The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. Data type Reference(https://fhir.hl7.org.uk/StructureDefinition/cstest-Organization) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2: CX.4 / (CX.4,CX.9,CX.10) rim: II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd: ./IdentifierIssuingAuthority
display	Σ	0..1	string	There are no (further) constraints on this element Element id List.source.display Short description Text alternative for the resource Definition Plain text narrative that identifies the resource in addition to the resource reference. Comments This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: N/A
orderedBy		0..1	CodeableConceptBinding	There are no (further) constraints on this element Element id List.orderedBy Short description What order the list has Definition What order applies to the items in the list. Requirements Important for presentation and rendering. Lists may be sorted to place more important information first or to group related entries. Comments Applications SHOULD render ordered lists in the order provided, but MAY allow users to re-order based on their own preferences as well. If there is no order specified, the order is unknown, though there may still be some order. Data type CodeableConcept Binding What order applies to the items in a list. ListOrderCodes (preferred) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD rim: .outboundRelationship[typeCode=COMP].sequenceNumber > 1
note		0..*	Annotation	There are no (further) constraints on this element Element id List.note Short description Comments about the list Definition Comments that apply to the overall list. Comments For systems that do not have structured annotations, they can simply communicate a single annotation with no author or time. This element may need to be included in narrative because of the potential for modifying information. Annotations SHOULD NOT be used to communicate "modifying" information that could be computable. (This is a SHOULD because enforcing user behavior is nearly impossible). Data type Annotation Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: N/A rim: Act rim: .inboundRelationship[typeCode=SUBJ].act.text
id		0..1	string	There are no (further) constraints on this element Element id List.note.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id List.note.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
author[x]	Σ	0..1		There are no (further) constraints on this element Element id List.note.author[x] Short description Individual responsible for the annotation Definition The individual responsible for making the annotation. Comments Organization is used when there's no need for specific attribution as to who made the comment. Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: N/A rim: Act.participant[typeCode=AUT].role
authorString			string	Data type string
authorReference			Reference()	Data type Reference()
time	Σ	0..1	dateTime	There are no (further) constraints on this element Element id List.note.time Short description When the annotation was made Definition Indicates when this particular annotation was made. Data type dateTime Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: N/A rim: Act.effectiveTime
text	Σ	1..1	markdown	There are no (further) constraints on this element Element id List.note.text Short description The annotation - text content (as markdown) Definition The text of the annotation in markdown format. Comments Systems are not required to have markdown support, so the text should be readable without markdown processing. The markdown syntax is GFM - see https://github.github.com/gfm/ Data type markdown Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: N/A rim: Act.text
entry	S I	0..*	BackboneElement	There are no (further) constraints on this element Element id List.entry Short description Entries in the list Definition Entries in this list. Comments If there are no entries in the list, an emptyReason SHOULD be provided. Data type BackboneElement Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: .outboundRelationship[typeCode=COMP] or .participation[typeCode=SBJ]
id		0..1	string	There are no (further) constraints on this element Element id List.entry.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id List.entry.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id List.entry.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
flag		0..1	CodeableConcept	There are no (further) constraints on this element Element id List.entry.flag Short description Status/Workflow information about this item Definition The flag allows the system constructing the list to indicate the role and significance of the item in the list. Requirements This field is present to support various clinical uses of lists, such as a discharge summary medication list, where flags specify whether the medication was added, modified, or deleted from the list. Comments The flag can only be understood in the context of the List.code. If the flag means that the entry has actually been deleted from the list, the deleted element SHALL be true. Deleted can only be used if the List.mode is "changes". Data type CodeableConcept Binding Codes that provide further information about the reason and meaning of the item in the list. PatientMedicineChangeTypes (example) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD rim: .outBoundRelationship[typeCode=COMP].target[classCode=OBS"].value
deleted	?! I	0..1	boolean	There are no (further) constraints on this element Element id List.entry.deleted Short description If this item is actually marked as deleted Definition True if this item is marked as deleted in the list. Requirements The flag element may contain codes that an application processing the list does not understand. However there can be no ambiguity if a list item is actually marked as "deleted". Comments If the flag means that the entry has actually been deleted from the list, the deleted element SHALL be true. Both flag and deleted can only be used if the List.mode is "changes". A deleted entry should be displayed in narrative as deleted. This element is labeled as a modifier because it indicates that an item is (to be) no longer in the list. Meaning when missing List items are generally only treated as deleted when this element explicitly carries a value of true. Systems SHOULD always populate this value when mode is 'changes' Data type boolean Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: added: .updateMode=("A","AR") retained: .updateMode="NC" updated: .updateMode="R" deleted: .updateMode="D"
date		0..1	dateTime	There are no (further) constraints on this element Element id List.entry.date Short description When item added to list Definition When this item was added to the list. Requirements The date may be significant for understanding the meaning of items in a working list. Data type dateTime Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: .availabilityTime
item	I	1..1	Reference()	Element id List.entry.item Short description Actual entry Definition A reference to the actual resource from which data was derived. Comments References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository. Data type Reference() Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity) rim: .target or .role or .role.entity
id		0..1	string	There are no (further) constraints on this element Element id List.entry.item.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id List.entry.item.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
reference	Σ I	0..1	string	There are no (further) constraints on this element Element id List.entry.item.reference Short description Literal reference, Relative, internal or absolute URL Definition A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources. Comments Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: N/A
type	Σ	0..1	uriBinding	There are no (further) constraints on this element Element id List.entry.item.type Short description Type the reference refers to (e.g. "Patient") Definition The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent. The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources). Comments This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified. Data type uri Binding Aa resource (or, for logical models, the URI of the logical model). ResourceType (extensible) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: N/A
identifier	Σ	0..1	Identifier	There are no (further) constraints on this element Element id List.entry.item.identifier Short description Logical reference, when literal reference is not known Definition An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference. Comments When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it. Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation\|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any). Data type Identifier Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: CX / EI (occasionally, more often EI maps to a resource id or a URL) rim: II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd: Identifier rim: .identifier
id		0..1	string	There are no (further) constraints on this element Element id List.entry.item.identifier.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id List.entry.item.identifier.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
use	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element id List.entry.item.identifier.use Short description usual \| official \| temp \| secondary \| old (If known) Definition The purpose of this identifier. Requirements Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. Comments Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. Data type code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: N/A rim: Role.code or implied by context
type	Σ	0..1	CodeableConceptBinding	There are no (further) constraints on this element Element id List.entry.item.identifier.type Short description Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. Requirements Allows users to make use of identifiers when the identifier system is not known. Comments This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. Data type CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD v2: CX.5 rim: Role.code or implied by context
system	Σ	0..1	uri	There are no (further) constraints on this element Element id List.entry.item.identifier.system Short description The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique. Requirements There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. Comments Identifier.system is always case sensitive. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General http://www.acme.com/identifiers/patient Mappings rim: n/a v2: CX.4 / EI-2-4 rim: II.root or Role.id.root servd: ./IdentifierType
value	Σ	0..1	string	There are no (further) constraints on this element Element id List.entry.item.identifier.value Short description The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system. Comments If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General 123456 Mappings rim: n/a v2: CX.1 / EI.1 rim: II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd: ./Value
period	Σ I	0..1	Period	There are no (further) constraints on this element Element id List.entry.item.identifier.period Short description Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use. Comments A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration. Data type Period Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` per-1: If present, start SHALL have a lower value than end `start.hasValue().not() or end.hasValue().not() or (start <= end)` Mappings rim: n/a v2: DR rim: IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"] v2: CX.7 + CX.8 rim: Role.effectiveTime or implied by context servd: ./StartDate and ./EndDate
assigner	Σ I	0..1	Reference(https://fhir.hl7.org.uk/StructureDefinition/cstest-Organization)	There are no (further) constraints on this element Element id List.entry.item.identifier.assigner Short description Organization that issued id (may be just text) Definition Organization that issued/manages the identifier. Comments The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. Data type Reference(https://fhir.hl7.org.uk/StructureDefinition/cstest-Organization) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2: CX.4 / (CX.4,CX.9,CX.10) rim: II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd: ./IdentifierIssuingAuthority
display	Σ	0..1	string	There are no (further) constraints on this element Element id List.entry.item.display Short description Text alternative for the resource Definition Plain text narrative that identifies the resource in addition to the resource reference. Comments This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a rim: N/A
emptyReason	I	0..1	CodeableConceptBinding	There are no (further) constraints on this element Element id List.emptyReason Short description Why list is empty Definition If the list is empty, why the list is empty. Requirements Allows capturing things like "none exist" or "not asked" which can be important for most lists. Comments The various reasons for an empty list make a significant interpretation to its interpretation. Note that this code is for use when the entire list has been suppressed, and not for when individual items are omitted - implementers may consider using a text note or a flag on an entry in these cases. Data type CodeableConcept Binding If a list is empty, why it is empty. https://fhir.hl7.org.uk/ValueSet/cstest-ListEmptyReasonCode (extensible) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD rim: .inboundRelationship[typeCode=SUBJ,code<ListEmptyReason].value[type=CD]