Important: This is a draft IG for trial use. Click here to give feedback.

HdBe-Refractie

WARNING This page contains a draft CBB, as raw output from the zib export and automatic conversion to CBB. It requires thorough review and adaption to the Belgian realm. This CBB is merely added for informative use.

CBB	Concept	Status
HdBe-Refraction	De refractiemeting is een meting waarbij de brekingsafwijking van het oog wordt bepaald. Bij de refractiemeting wordt de benodigde correctie bepaald: de sferische sterkte (in dioptrie),de cylindrische sterkte (in dioptrie), de asrichting (in graden) voor de eventuele cilindrische sterkte , de prisma (in dioptrie) en de eventuele extra sterkte van het leesgedeelte (in dioptrie) , de zogenaamde leesadditie. Purpose Het doel van een refractiemeting is het bepalen van de correctie (door middel van bril of lenzen) waarmee de patiënt optimaal kan zien. Patient Population Volwassenen en kinderen vanaf de leeftijd dat ze een plaatjeskaart kunnen interpreteren.	draft

CBB

Concept

Status

HdBe-Refraction

De refractiemeting is een meting waarbij de brekingsafwijking van het oog wordt bepaald. Bij de refractiemeting wordt de benodigde correctie bepaald: de sferische sterkte (in dioptrie),de cylindrische sterkte (in dioptrie), de asrichting (in graden) voor de eventuele cilindrische sterkte , de prisma (in dioptrie) en de eventuele extra sterkte van het leesgedeelte (in dioptrie) , de zogenaamde leesadditie.

Purpose

Het doel van een refractiemeting is het bepalen van de correctie (door middel van bril of lenzen) waarmee de patiënt optimaal kan zien.

Patient Population

Volwassenen en kinderen vanaf de leeftijd dat ze een plaatjeskaart kunnen interpreteren.

draft

Refraction			Refraction	Element id Refraction Short description Refractie Definition Rootconcept van de bouwsteen Refractie. Dit rootconcept bevat alle gegevenselementen van de bouwsteen Refractie. Data type Refraction Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
id		0..1	string	There are no (further) constraints on this element Element id Refraction.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Refraction.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
RefractionMeasurementMethod		0..1	CodeableConceptBinding	Element id Refraction.RefractionMeasurementMethod Short description RefractieMeetMethode Definition De gebruikte methodiek om de refractie te meten Comments Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination. Data type CodeableConcept Binding RefractionMeasurementMethod codes RefractionMeasurementMethod (extensible) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD
RefractionDateTime		0..1	dateTime	Element id Refraction.RefractionDateTime Short description RefractieDatumTijd Definition De datum en tijd waarop de refractie is gemeten. Data type dateTime Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
CilindricalRefraction		0..1	BackboneElement	Element id Refraction.CilindricalRefraction Short description CilindrischeRefractie Definition Container van het concept CilindrischeRefractie. Deze container bevat alle gegevenselementen van het concept CilindrischeRefractie. Data type BackboneElement Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
id		0..1	string	There are no (further) constraints on this element Element id Refraction.CilindricalRefraction.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Refraction.CilindricalRefraction.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id Refraction.CilindricalRefraction.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
CylindricalRefractionValue	I	1..1	Quantity	Element id Refraction.CilindricalRefraction.CylindricalRefractionValue Short description CilindrischeRefractieWaarde Definition Dit is de sterkte van de cylinder die nodig is om de cylindrische afwijking (astigmatisme) te corrigeren, uitgedrukt in dioptrieën, oplopend per 0.25D. Bij een cilindrische refractiewaarde dient ook de as van de cilinder opgegeven te worden. Comments The context of use may frequently define what kind of quantity this is and therefore what kind of units can be used. The context of use may also restrict the values for the comparator. Data type Quantity Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` qty-3: If a code for the unit is present, the system SHALL also be present `code.empty() or system.exists()` Mappings rim: n/a v2: SN (see also Range) or CQ rim: PQ, IVL<PQ>, MO, CO, depending on the values
CilindricRefractionAxis	I	1..1	Quantity	Element id Refraction.CilindricalRefraction.CilindricRefractionAxis Short description CilindrischeRefractieAs Definition De asrichting van de cilindrische refractiewaarde uitgedrukt in graden. Comments The context of use may frequently define what kind of quantity this is and therefore what kind of units can be used. The context of use may also restrict the values for the comparator. Data type Quantity Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` qty-3: If a code for the unit is present, the system SHALL also be present `code.empty() or system.exists()` Mappings rim: n/a v2: SN (see also Range) or CQ rim: PQ, IVL<PQ>, MO, CO, depending on the values
Prisma		0..1	BackboneElement	Element id Refraction.Prisma Short description Prisma Definition Container van het concept Prisma. Deze container bevat alle gegevenselementen van de container Prisma. Data type BackboneElement Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
id		0..1	string	There are no (further) constraints on this element Element id Refraction.Prisma.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Refraction.Prisma.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id Refraction.Prisma.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
PrismaValue	I	1..1	Quantity	Element id Refraction.Prisma.PrismaValue Short description PrismaWaarde Definition De sterkte van de prisma, uitgedrukt in dioptrieën. Comments The context of use may frequently define what kind of quantity this is and therefore what kind of units can be used. The context of use may also restrict the values for the comparator. Data type Quantity Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` qty-3: If a code for the unit is present, the system SHALL also be present `code.empty() or system.exists()` Mappings rim: n/a v2: SN (see also Range) or CQ rim: PQ, IVL<PQ>, MO, CO, depending on the values
PrismaBase	I	1..1	Quantity	Element id Refraction.Prisma.PrismaBase Short description PrismaBasis Definition De basis van de prisma, uitgedrukt in graden. Comments The context of use may frequently define what kind of quantity this is and therefore what kind of units can be used. The context of use may also restrict the values for the comparator. Data type Quantity Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` qty-3: If a code for the unit is present, the system SHALL also be present `code.empty() or system.exists()` Mappings rim: n/a v2: SN (see also Range) or CQ rim: PQ, IVL<PQ>, MO, CO, depending on the values
SfericRefraction		0..1	BackboneElement	Element id Refraction.SfericRefraction Short description SferischeRefractie Definition Container van het concept SferischeRefractie. Deze container bevat alle gegevenselementen van het concept SferischeRefractie. Data type BackboneElement Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
id		0..1	string	There are no (further) constraints on this element Element id Refraction.SfericRefraction.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Refraction.SfericRefraction.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id Refraction.SfericRefraction.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
SfericRefractionValue	I	1..1	Quantity	Element id Refraction.SfericRefraction.SfericRefractionValue Short description SferischeRefractieWaarde Definition De sferische brilsterkte die nodig is om bijziendheid (myopie) of verziendheid (hypermetropie) te corrigeren, uitgedrukt in dioptrieën, oplopend per 0.25D. Comments The context of use may frequently define what kind of quantity this is and therefore what kind of units can be used. The context of use may also restrict the values for the comparator. Data type Quantity Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` qty-3: If a code for the unit is present, the system SHALL also be present `code.empty() or system.exists()` Mappings rim: n/a v2: SN (see also Range) or CQ rim: PQ, IVL<PQ>, MO, CO, depending on the values
SfericalEquivalent	I	0..1	Quantity	Element id Refraction.SfericRefraction.SfericalEquivalent Short description SferischEquivalent Definition De sferische sterkte en halve cylindrische sterkte bij elkaar opgeteld. Wordt uitgedrukt in dioptrieën, oplopend per 0.25D. Door sommige apparatuur wordt de sferische equivalent automatisch berekend. Comments The context of use may frequently define what kind of quantity this is and therefore what kind of units can be used. The context of use may also restrict the values for the comparator. Data type Quantity Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` qty-3: If a code for the unit is present, the system SHALL also be present `code.empty() or system.exists()` Mappings rim: n/a v2: SN (see also Range) or CQ rim: PQ, IVL<PQ>, MO, CO, depending on the values
ReadAddition	I	0..1	Quantity	Element id Refraction.ReadAddition Short description LeesAdditie Definition Een toeslag die wordt opgeteld bij de uitkomst van de refractie waarde om de sterkte van de leesbril te bepalen, uitgedrukt in dioptrieën. Comments The context of use may frequently define what kind of quantity this is and therefore what kind of units can be used. The context of use may also restrict the values for the comparator. Data type Quantity Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` qty-3: If a code for the unit is present, the system SHALL also be present `code.empty() or system.exists()` Mappings rim: n/a v2: SN (see also Range) or CQ rim: PQ, IVL<PQ>, MO, CO, depending on the values
AnatomicalLocation	I	0..1	Reference(HdBe-AnatomicalLocation)	Element id Refraction.AnatomicalLocation Short description AnatomischeLocatie Definition De zijdigheid van het oog waarvan de refractie is gemeten. Comments References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository. Data type Reference(HdBe-AnatomicalLocation) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity)

Refraction		0..*
Refraction.RefractionMeasurementMethod	CodeableConcept	0..1
Refraction.RefractionDateTime	dateTime	0..1
Refraction.CilindricalRefraction	BackboneElement	0..1
Refraction.CilindricalRefraction.CylindricalRefractionValue	Quantity	1..1
Refraction.CilindricalRefraction.CilindricRefractionAxis	Quantity	1..1
Refraction.Prisma	BackboneElement	0..1
Refraction.Prisma.PrismaValue	Quantity	1..1
Refraction.Prisma.PrismaBase	Quantity	1..1
Refraction.SfericRefraction	BackboneElement	0..1
Refraction.SfericRefraction.SfericRefractionValue	Quantity	1..1
Refraction.SfericRefraction.SfericalEquivalent	Quantity	0..1
Refraction.ReadAddition	Quantity	0..1
Refraction.AnatomicalLocation	Reference(HdBe-AnatomicalLocation)	0..1

Refraction
Definition	Root concept of the Refractie information model.This root concept contains all data elements of the Refraction information model.
Cardinality	0...*
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	rim: n/a
Refraction.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Cardinality	0...1
Type	string
Mappings	rim: n/a
Refraction.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Cardinality	0...*
Type	Extension
Alias	extensions, user content
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Slicing	Unordered, Open, by url(Value)
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()`
Mappings	rim: n/a rim: N/A
Refraction.RefractionMeasurementMethod
Definition	The method used to measure the refraction.
Cardinality	0...1
Type	CodeableConcept
Binding	RefractionMeasurementMethod codes RefractionMeasurementMethod (extensible)
Comments	Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD
Refraction.RefractionDateTime
Definition	The date and time when the refraction measurement was carried out.
Cardinality	0...1
Type	dateTime
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	rim: n/a
Refraction.CilindricalRefraction
Definition	Container of the CilindricalRefraction concept.This container contains all data elements of the CilindricalRefraction concept.
Cardinality	0...1
Type	BackboneElement
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	rim: n/a
Refraction.CilindricalRefraction.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Cardinality	0...1
Type	string
Mappings	rim: n/a
Refraction.CilindricalRefraction.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Cardinality	0...*
Type	Extension
Alias	extensions, user content
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Slicing	Unordered, Open, by url(Value)
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()`
Mappings	rim: n/a rim: N/A
Refraction.CilindricalRefraction.modifierExtension
Definition	May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).
Cardinality	0...*
Type	Extension
Modifier	True
Summary	True
Alias	extensions, user content, modifiers
Requirements	Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()`
Mappings	rim: n/a rim: N/A
Refraction.CilindricalRefraction.CylindricalRefractionValue
Definition	The power of the cylinder needed to correct the cylindrical error (astigmatism), expressed in diopters. When a cylindrical refraction is registered, the axis of the cylinder must also be specified.
Cardinality	1...1
Type	Quantity
Comments	The context of use may frequently define what kind of quantity this is and therefore what kind of units can be used. The context of use may also restrict the values for the comparator.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` qty-3: If a code for the unit is present, the system SHALL also be present `code.empty() or system.exists()`
Mappings	rim: n/a v2: SN (see also Range) or CQ rim: PQ, IVL<PQ>, MO, CO, depending on the values
Refraction.CilindricalRefraction.CilindricRefractionAxis
Definition	The axis direction of the cylindrical refraction value expressed in degrees.
Cardinality	1...1
Type	Quantity
Comments	The context of use may frequently define what kind of quantity this is and therefore what kind of units can be used. The context of use may also restrict the values for the comparator.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` qty-3: If a code for the unit is present, the system SHALL also be present `code.empty() or system.exists()`
Mappings	rim: n/a v2: SN (see also Range) or CQ rim: PQ, IVL<PQ>, MO, CO, depending on the values
Refraction.Prisma
Definition	Container of the Prisma concept.This container contains all data elements of the Prisma container.
Cardinality	0...1
Type	BackboneElement
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	rim: n/a
Refraction.Prisma.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Cardinality	0...1
Type	string
Mappings	rim: n/a
Refraction.Prisma.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Cardinality	0...*
Type	Extension
Alias	extensions, user content
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Slicing	Unordered, Open, by url(Value)
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()`
Mappings	rim: n/a rim: N/A
Refraction.Prisma.modifierExtension
Definition	May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).
Cardinality	0...*
Type	Extension
Modifier	True
Summary	True
Alias	extensions, user content, modifiers
Requirements	Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()`
Mappings	rim: n/a rim: N/A
Refraction.Prisma.PrismaValue
Definition	The power of the prism, expressed in diopters.
Cardinality	1...1
Type	Quantity
Comments	The context of use may frequently define what kind of quantity this is and therefore what kind of units can be used. The context of use may also restrict the values for the comparator.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` qty-3: If a code for the unit is present, the system SHALL also be present `code.empty() or system.exists()`
Mappings	rim: n/a v2: SN (see also Range) or CQ rim: PQ, IVL<PQ>, MO, CO, depending on the values
Refraction.Prisma.PrismaBase
Definition	The base of the prism, expressed in degrees.
Cardinality	1...1
Type	Quantity
Comments	The context of use may frequently define what kind of quantity this is and therefore what kind of units can be used. The context of use may also restrict the values for the comparator.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` qty-3: If a code for the unit is present, the system SHALL also be present `code.empty() or system.exists()`
Mappings	rim: n/a v2: SN (see also Range) or CQ rim: PQ, IVL<PQ>, MO, CO, depending on the values
Refraction.SfericRefraction
Definition	Container of the SfericRefraction concept.This container contains all data elements of the SfericRefraction concept.
Cardinality	0...1
Type	BackboneElement
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	rim: n/a
Refraction.SfericRefraction.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Cardinality	0...1
Type	string
Mappings	rim: n/a
Refraction.SfericRefraction.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Cardinality	0...*
Type	Extension
Alias	extensions, user content
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Slicing	Unordered, Open, by url(Value)
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()`
Mappings	rim: n/a rim: N/A
Refraction.SfericRefraction.modifierExtension
Definition	May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).
Cardinality	0...*
Type	Extension
Modifier	True
Summary	True
Alias	extensions, user content, modifiers
Requirements	Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()`
Mappings	rim: n/a rim: N/A
Refraction.SfericRefraction.SfericRefractionValue
Definition	The spherical spectacle strength power needed to correct nearsightedness (myopia) or farsightedness (hyperopia), expressed in diopters, ascending by 0.25D.
Cardinality	1...1
Type	Quantity
Comments	The context of use may frequently define what kind of quantity this is and therefore what kind of units can be used. The context of use may also restrict the values for the comparator.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` qty-3: If a code for the unit is present, the system SHALL also be present `code.empty() or system.exists()`
Mappings	rim: n/a v2: SN (see also Range) or CQ rim: PQ, IVL<PQ>, MO, CO, depending on the values
Refraction.SfericRefraction.SfericalEquivalent
Definition	The spherical power added to half of the cylindrical power. Expressed in diopters, ascending by 0.1D. Some equipment automatically calculates the spherical equivalent automatically.
Cardinality	0...1
Type	Quantity
Comments	The context of use may frequently define what kind of quantity this is and therefore what kind of units can be used. The context of use may also restrict the values for the comparator.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` qty-3: If a code for the unit is present, the system SHALL also be present `code.empty() or system.exists()`
Mappings	rim: n/a v2: SN (see also Range) or CQ rim: PQ, IVL<PQ>, MO, CO, depending on the values
Refraction.ReadAddition
Definition	A supplement that is added to the refraction value to determine the strength of the reading glasses, expressed in diopters.
Cardinality	0...1
Type	Quantity
Comments	The context of use may frequently define what kind of quantity this is and therefore what kind of units can be used. The context of use may also restrict the values for the comparator.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` qty-3: If a code for the unit is present, the system SHALL also be present `code.empty() or system.exists()`
Mappings	rim: n/a v2: SN (see also Range) or CQ rim: PQ, IVL<PQ>, MO, CO, depending on the values
Refraction.AnatomicalLocation
Definition	The laterality of the eye whose of which the refraction has been measured.
Cardinality	0...1
Type	Reference(HdBe-AnatomicalLocation)
Comments	References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))`
Mappings	rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity)

Example instances

[CBB name]
[Concept name ]	[example value]

// example of NameInformation

## Example instances

| NameInformation      |                   |
|----------------------|-------------------|
| FirstNames | Johanna Petronella Maria   
| Initials | J.P.M. 
| GivenName | Jo 
| NameUsage | Geslachtsnaam partner gevolgd door eigen geslachtsnaam
| LastName.Prefix | van
| LastName.LastName | Putten
| LastNamePartner.PartnerPrefix | van der
| LastNamePartner.PartnerLastName | Giessen
| Titles |

zib [zib name + version](https://zibs.nl/wiki/[zib name + version(release)]) difference

Concept	Category	Description
`[element.path]`	[category of change]	[Description of change]([Reference to ticket/issue/zulip chat using MarkDown link])

Terminology Bindings

Path	Name	Strength	URL
RefractionMeasurementMethod	RefractionMeasurementMethod	extensible	https://fhir.healthdata.be/ValueSet/RefractionMeasurementMethod