Important: This is a draft IG for trial use. Click here to give feedback.

HdBe-Wound

WARNING This page contains a draft CBB, as raw output from the zib export and automatic conversion to CBB. It requires thorough review and adaption to the Belgian realm. This CBB is merely added for informative use.

CBB	Description	Status
HdBe-Wound	A wound is an interruption of the continuity of the skin, often caused by external influences. A commonly used model for documenting the wound properties is the TIME (‘Tissue’, ‘Infection’, ‘Moisture’, ‘Edge’) model, which can be used to systematically describe the wound. For wound tissue (T in the TIME model), the structure of the WCS model (Woundcare Consultant Society, WCS Kenniscentrum Wondzorg) is used. The WCS model is not suited for describing oncological ulcers. There is a separate classification for that. Oncological ulcers are skin defects which result from the tumor process. They are different from wounds resulting from cancer treatment, such as radiotherapy, chemotherapy or surgery. The concept does not describe decubitus wounds and burn wounds. For these, the relevant information models can be used. Purpose Information on the wound is recorded to share this information with other health professionals. This information can be used to monitor the wound’s healing process and provide insight into the implemented policy. In a transfer situation, it facilitates continuation of the treatment. Evidence Base Though the TIME model can be applied to all types of wounds in the list of wound types, the wound tissue classification (T in the TIME model) is different for different types. The WCS classification is used for surgical wounds, trauma wounds, diabetic foot and venous ulcers. The following values are used: Red wound: granulation tissue Yellow wound: signs of infection or fibrin layer Black wound: with necrosis (Source: www.wcs.nl) Tissue in oncological ulcers is classified as follows: Degree I: intact epidermis with imminent damage to the skin through underlying tumor tissue Degree II: beginning damage to the subcutis Degree III: deep continued growth with damaged subcutis Degree IV: dry and/or liquefactive necrosis of up to 30% of the wound surface Degree V: dry and/or liquefactive necrosis of more than 30% of the wound surface (Source: www.oncoline.nl)	draft

CBB

Description

Status

HdBe-Wound

A wound is an interruption of the continuity of the skin, often caused by external influences. A commonly used model for documenting the wound properties is the TIME (‘Tissue’, ‘Infection’, ‘Moisture’, ‘Edge’) model, which can be used to systematically describe the wound. For wound tissue (T in the TIME model), the structure of the WCS model (Woundcare Consultant Society, WCS Kenniscentrum Wondzorg) is used. The WCS model is not suited for describing oncological ulcers. There is a separate classification for that. Oncological ulcers are skin defects which result from the tumor process. They are different from wounds resulting from cancer treatment, such as radiotherapy, chemotherapy or surgery.

The concept does not describe decubitus wounds and burn wounds. For these, the relevant information models can be used.

Purpose

Information on the wound is recorded to share this information with other health professionals. This information can be used to monitor the wound’s healing process and provide insight into the implemented policy. In a transfer situation, it facilitates continuation of the treatment.

Evidence Base

Though the TIME model can be applied to all types of wounds in the list of wound types, the wound tissue classification (T in the TIME model) is different for different types.

The WCS classification is used for surgical wounds, trauma wounds, diabetic foot and venous ulcers. The following values are used:

Red wound: granulation tissue
Yellow wound: signs of infection or fibrin layer
Black wound: with necrosis (Source: www.wcs.nl)

Tissue in oncological ulcers is classified as follows:

Degree I: intact epidermis with imminent damage to the skin through underlying tumor tissue
Degree II: beginning damage to the subcutis
Degree III: deep continued growth with damaged subcutis
Degree IV: dry and/or liquefactive necrosis of up to 30% of the wound surface
Degree V: dry and/or liquefactive necrosis of more than 30% of the wound surface (Source: www.oncoline.nl)

draft

Wound			Wound	Element id Wound Short description Wound Definition Root concept of the Wound information model. This root concept contains all data elements of the Wound information model. Data type Wound Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
id		0..1	string	There are no (further) constraints on this element Element id Wound.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Wound.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
WoundType		1..1	CodeableConceptBinding	Element id Wound.WoundType Short description WoundType Definition Description of the type of wound. Comments Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination. Data type CodeableConcept Binding WoundType codes WoundType (extensible) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD
WoundTissue		0..1	CodeableConcept	Element id Wound.WoundTissue Short description WoundTissue Definition Description of the tissue of the wound. For this, the WCS model can be used. A different classification is used for oncological ulcers. Comments Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination. Data type CodeableConcept Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD
WoundInfection		0..1	boolean	Element id Wound.WoundInfection Short description WoundInfection Definition Indication stating whether the wound is infected. Data type boolean Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
WoundMoisture		0..1	CodeableConceptBinding	Element id Wound.WoundMoisture Short description WoundMoisture Definition Description of the moisture in the wound. Comments Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination. Data type CodeableConcept Binding WoundMoisture codes WoundMoisture (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD
WoundEdge		0..1	CodeableConceptBinding	Element id Wound.WoundEdge Short description WoundEdge Definition Description of the condition of the outer edges of the wound. Comments Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination. Data type CodeableConcept Binding WoundEdge codes WoundEdge (extensible) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD
WoundLength	I	0..1	Quantity	Element id Wound.WoundLength Short description WoundLength Definition The length of the wound. Comments The context of use may frequently define what kind of quantity this is and therefore what kind of units can be used. The context of use may also restrict the values for the comparator. Data type Quantity Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` qty-3: If a code for the unit is present, the system SHALL also be present `code.empty() or system.exists()` Mappings rim: n/a v2: SN (see also Range) or CQ rim: PQ, IVL<PQ>, MO, CO, depending on the values
WoundWidth	I	0..1	Quantity	Element id Wound.WoundWidth Short description WoundWidth Definition The width of the wound. Comments The context of use may frequently define what kind of quantity this is and therefore what kind of units can be used. The context of use may also restrict the values for the comparator. Data type Quantity Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` qty-3: If a code for the unit is present, the system SHALL also be present `code.empty() or system.exists()` Mappings rim: n/a v2: SN (see also Range) or CQ rim: PQ, IVL<PQ>, MO, CO, depending on the values
WoundDepth	I	0..1	Quantity	Element id Wound.WoundDepth Short description WoundDepth Definition The depth of the wound. Comments The context of use may frequently define what kind of quantity this is and therefore what kind of units can be used. The context of use may also restrict the values for the comparator. Data type Quantity Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` qty-3: If a code for the unit is present, the system SHALL also be present `code.empty() or system.exists()` Mappings rim: n/a v2: SN (see also Range) or CQ rim: PQ, IVL<PQ>, MO, CO, depending on the values
AnatomicalLocation		0..1	HdBe-AnatomicalLocation	Element id Wound.AnatomicalLocation Short description AnatomicalLocation Definition The location of the wound on the body. Data type HdBe-AnatomicalLocation Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
WoundDateOfOnset		0..1	dateTime	Element id Wound.WoundDateOfOnset Short description WoundDateOfOnset Definition The date on which the wound appeared. Data type dateTime Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
DateOfLastDressingChange		0..1	dateTime	Element id Wound.DateOfLastDressingChange Short description DateOfLastDressingChange Definition Date on which the dressing was last changed. Data type dateTime Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
Drain		0..1	BackboneElement	Element id Wound.Drain Short description Drain Definition A drain is a medical aid placed to drain blood and exudate from the wound area. Data type BackboneElement Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
id		0..1	string	There are no (further) constraints on this element Element id Wound.Drain.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Wound.Drain.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id Wound.Drain.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
MedicalDevice		1..1	BackboneElement	Element id Wound.Drain.MedicalDevice Short description MedicalDevice Definition Root concept of the MedicalDevice information model. This root concept contains all data elements of the MedicalDevice information model. Data type BackboneElement Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
id		0..1	string	There are no (further) constraints on this element Element id Wound.Drain.MedicalDevice.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Wound.Drain.MedicalDevice.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id Wound.Drain.MedicalDevice.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
Product		1..1	BackboneElement	Element id Wound.Drain.MedicalDevice.Product Short description Product Definition The medical device (internally or externally). Data type BackboneElement Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
id		0..1	string	There are no (further) constraints on this element Element id Wound.Drain.MedicalDevice.Product.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Wound.Drain.MedicalDevice.Product.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id Wound.Drain.MedicalDevice.Product.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
ProductId		0..1	CodeableConcept	Element id Wound.Drain.MedicalDevice.Product.ProductId Short description ProductID Definition Unique identification of the product, such as the serial number. Frequently used coding systems are HIBC and GTIN. If the law requires this to be registered on the basis of a UDI (Unique Device Identifier), the unique identification must consist of a UDI-DI (Device Identifier) and a UDI-PI (Production Identifier(s)). See http://www.gs1.org/healthcare/udi for more information. The UDI-DI must be recorded in reference to GS1 GTIN (01) encryptions, with which for example a firm is linked to the product type. The UDI-PI must consist of the following: application identifier (AI); expiration date (17) and serial number (21) and/or batch or lot number (10). Comments Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination. Data type CodeableConcept Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD
ProductType		0..*	stringBinding	Element id Wound.Drain.MedicalDevice.Product.ProductType Short description ProductType Definition Type of drain applied to the wound. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type string Binding WoundDrainType codes WoundDrainType (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
ProductDescription		0..1	string	Element id Wound.Drain.MedicalDevice.ProductDescription Short description ProductDescription Definition Textual description of the product. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
AnatomicalLocation		0..1	HdBe-AnatomicalLocation	Element id Wound.Drain.MedicalDevice.AnatomicalLocation Short description AnatomicalLocation Definition Patient’s anatomical location of the medical device used. Data type HdBe-AnatomicalLocation Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
Indication		0..*	BackboneElement	Element id Wound.Drain.MedicalDevice.Indication Short description Indication Definition The medical reason for use of the medical device. Data type BackboneElement Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
id		0..1	string	There are no (further) constraints on this element Element id Wound.Drain.MedicalDevice.Indication.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Wound.Drain.MedicalDevice.Indication.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id Wound.Drain.MedicalDevice.Indication.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
Problem	I	1..1	Reference(HdBe-Problem)	Element id Wound.Drain.MedicalDevice.Indication.Problem Short description Problem Definition Root concept of the Problem information model. A problem describes a situation with regard to an individual’s health and/or welfare. This situation can be described by the patient himselve (in the form of a complaint) or by their healthprofessional (in the form of a diagnosis, for example). Comments References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository. Data type Reference(HdBe-Problem) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity)
StartDate		0..1	dateTime	Element id Wound.Drain.MedicalDevice.StartDate Short description StartDate Definition The start date of the first use or implant of the medical device. A ‘vague’ date, such as only the year, is permitted. Data type dateTime Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
EindDatum		0..1	dateTime	Element id Wound.Drain.MedicalDevice.EindDatum Short description EindDatum Alternate names EndDate Definition The end date of the last use or explant of the medical device. A ‘vague’ date, such as only the year, is permitted. Data type dateTime Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
Comment		0..1	string	Element id Wound.Drain.MedicalDevice.Comment Short description Comment Definition Comment about use or information on the medical device used. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
Location		0..1	BackboneElement	Element id Wound.Drain.MedicalDevice.Location Short description Location Definition The healthcare organization at which use of the medical device was initiated or where the aid was implanted. Data type BackboneElement Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
id		0..1	string	There are no (further) constraints on this element Element id Wound.Drain.MedicalDevice.Location.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Wound.Drain.MedicalDevice.Location.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id Wound.Drain.MedicalDevice.Location.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
HealthcareOrganization	I	1..1	Reference(HdBe-HealthcareOrganization)	Element id Wound.Drain.MedicalDevice.Location.HealthcareOrganization Short description HealthcareOrganization Definition Root concept of the Healthcare Organization information model. This root concept contains all data elements of the Healthcare Organization information model. Comments References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository. Data type Reference(HdBe-HealthcareOrganization) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity)
HealthProfessional	I	0..1	Reference(HdBe-HealthProfessional)	Element id Wound.Drain.MedicalDevice.HealthProfessional Short description HealthProfessional Definition The healthcare professional involved in the indication for use of the medical device implant. Comments References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository. Data type Reference(HdBe-HealthProfessional) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity)
WoundImage		0..*	base64Binary	Element id Wound.WoundImage Short description WoundImage Definition A photo of the wound. Comments A stream of bytes, base64 encoded Data type base64Binary Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a
Comment		0..1	string	Element id Wound.Comment Short description Comment Definition Comment on the wound. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a

Wound		0..*
Wound.WoundType	CodeableConcept	1..1
Wound.WoundTissue	CodeableConcept	0..1
Wound.WoundInfection	boolean	0..1
Wound.WoundMoisture	CodeableConcept	0..1
Wound.WoundEdge	CodeableConcept	0..1
Wound.WoundLength	Quantity	0..1
Wound.WoundWidth	Quantity	0..1
Wound.WoundDepth	Quantity	0..1
Wound.AnatomicalLocation	HdBe-AnatomicalLocation	0..1
Wound.WoundDateOfOnset	dateTime	0..1
Wound.DateOfLastDressingChange	dateTime	0..1
Wound.Drain	BackboneElement	0..1
Wound.Drain.MedicalDevice	BackboneElement	1..1
Wound.Drain.MedicalDevice.Product	BackboneElement	1..1
Wound.Drain.MedicalDevice.Product.ProductId	CodeableConcept	0..1
Wound.Drain.MedicalDevice.Product.ProductType	string	0..*
Wound.Drain.MedicalDevice.ProductDescription	string	0..1
Wound.Drain.MedicalDevice.AnatomicalLocation	HdBe-AnatomicalLocation	0..1
Wound.Drain.MedicalDevice.Indication	BackboneElement	0..*
Wound.Drain.MedicalDevice.Indication.Problem	Reference(HdBe-Problem)	1..1
Wound.Drain.MedicalDevice.StartDate	dateTime	0..1
Wound.Drain.MedicalDevice.EindDatum	dateTime	0..1
Wound.Drain.MedicalDevice.Comment	string	0..1
Wound.Drain.MedicalDevice.Location	BackboneElement	0..1
Wound.Drain.MedicalDevice.Location.HealthcareOrganization	Reference(HdBe-HealthcareOrganization)	1..1
Wound.Drain.MedicalDevice.HealthProfessional	Reference(HdBe-HealthProfessional)	0..1
Wound.WoundImage	base64Binary	0..*
Wound.Comment	string	0..1

Wound
Definition	Root concept of the Wound information model. This root concept contains all data elements of the Wound information model.
Cardinality	0...*
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	rim: n/a
Wound.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Cardinality	0...1
Type	string
Mappings	rim: n/a
Wound.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Cardinality	0...*
Type	Extension
Alias	extensions, user content
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Slicing	Unordered, Open, by url(Value)
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()`
Mappings	rim: n/a rim: N/A
Wound.WoundType
Definition	Description of the type of wound.
Cardinality	1...1
Type	CodeableConcept
Binding	WoundType codes WoundType (extensible)
Comments	Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD
Wound.WoundTissue
Definition	Description of the tissue of the wound. For this, the WCS model can be used. A different classification is used for oncological ulcers.
Cardinality	0...1
Type	CodeableConcept
Comments	Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD
Wound.WoundInfection
Definition	Indication stating whether the wound is infected.
Cardinality	0...1
Type	boolean
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	rim: n/a
Wound.WoundMoisture
Definition	Description of the moisture in the wound.
Cardinality	0...1
Type	CodeableConcept
Binding	WoundMoisture codes WoundMoisture (required)
Comments	Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD
Wound.WoundEdge
Definition	Description of the condition of the outer edges of the wound.
Cardinality	0...1
Type	CodeableConcept
Binding	WoundEdge codes WoundEdge (extensible)
Comments	Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD
Wound.WoundLength
Definition	The length of the wound.
Cardinality	0...1
Type	Quantity
Comments	The context of use may frequently define what kind of quantity this is and therefore what kind of units can be used. The context of use may also restrict the values for the comparator.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` qty-3: If a code for the unit is present, the system SHALL also be present `code.empty() or system.exists()`
Mappings	rim: n/a v2: SN (see also Range) or CQ rim: PQ, IVL<PQ>, MO, CO, depending on the values
Wound.WoundWidth
Definition	The width of the wound.
Cardinality	0...1
Type	Quantity
Comments	The context of use may frequently define what kind of quantity this is and therefore what kind of units can be used. The context of use may also restrict the values for the comparator.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` qty-3: If a code for the unit is present, the system SHALL also be present `code.empty() or system.exists()`
Mappings	rim: n/a v2: SN (see also Range) or CQ rim: PQ, IVL<PQ>, MO, CO, depending on the values
Wound.WoundDepth
Definition	The depth of the wound.
Cardinality	0...1
Type	Quantity
Comments	The context of use may frequently define what kind of quantity this is and therefore what kind of units can be used. The context of use may also restrict the values for the comparator.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` qty-3: If a code for the unit is present, the system SHALL also be present `code.empty() or system.exists()`
Mappings	rim: n/a v2: SN (see also Range) or CQ rim: PQ, IVL<PQ>, MO, CO, depending on the values
Wound.AnatomicalLocation
Definition	The location of the wound on the body.
Cardinality	0...1
Type	HdBe-AnatomicalLocation
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	rim: n/a
Wound.WoundDateOfOnset
Definition	The date on which the wound appeared.
Cardinality	0...1
Type	dateTime
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	rim: n/a
Wound.DateOfLastDressingChange
Definition	Date on which the dressing was last changed.
Cardinality	0...1
Type	dateTime
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	rim: n/a
Wound.Drain
Definition	A drain is a medical aid placed to drain blood and exudate from the wound area.
Cardinality	0...1
Type	BackboneElement
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	rim: n/a
Wound.Drain.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Cardinality	0...1
Type	string
Mappings	rim: n/a
Wound.Drain.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Cardinality	0...*
Type	Extension
Alias	extensions, user content
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Slicing	Unordered, Open, by url(Value)
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()`
Mappings	rim: n/a rim: N/A
Wound.Drain.modifierExtension
Definition	May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).
Cardinality	0...*
Type	Extension
Modifier	True
Summary	True
Alias	extensions, user content, modifiers
Requirements	Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()`
Mappings	rim: n/a rim: N/A
Wound.Drain.MedicalDevice
Definition	Root concept of the MedicalDevice information model. This root concept contains all data elements of the MedicalDevice information model.
Cardinality	1...1
Type	BackboneElement
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	rim: n/a
Wound.Drain.MedicalDevice.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Cardinality	0...1
Type	string
Mappings	rim: n/a
Wound.Drain.MedicalDevice.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Cardinality	0...*
Type	Extension
Alias	extensions, user content
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Slicing	Unordered, Open, by url(Value)
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()`
Mappings	rim: n/a rim: N/A
Wound.Drain.MedicalDevice.modifierExtension
Definition	May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).
Cardinality	0...*
Type	Extension
Modifier	True
Summary	True
Alias	extensions, user content, modifiers
Requirements	Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()`
Mappings	rim: n/a rim: N/A
Wound.Drain.MedicalDevice.Product
Definition	The medical device (internally or externally).
Cardinality	1...1
Type	BackboneElement
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	rim: n/a
Wound.Drain.MedicalDevice.Product.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Cardinality	0...1
Type	string
Mappings	rim: n/a
Wound.Drain.MedicalDevice.Product.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Cardinality	0...*
Type	Extension
Alias	extensions, user content
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Slicing	Unordered, Open, by url(Value)
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()`
Mappings	rim: n/a rim: N/A
Wound.Drain.MedicalDevice.Product.modifierExtension
Definition	May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).
Cardinality	0...*
Type	Extension
Modifier	True
Summary	True
Alias	extensions, user content, modifiers
Requirements	Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()`
Mappings	rim: n/a rim: N/A
Wound.Drain.MedicalDevice.Product.ProductId
Definition	Unique identification of the product, such as the serial number. Frequently used coding systems are HIBC and GTIN. If the law requires this to be registered on the basis of a UDI (Unique Device Identifier), the unique identification must consist of a UDI-DI (Device Identifier) and a UDI-PI (Production Identifier(s)). See http://www.gs1.org/healthcare/udi for more information. The UDI-DI must be recorded in reference to GS1 GTIN (01) encryptions, with which for example a firm is linked to the product type. The UDI-PI must consist of the following: application identifier (AI); expiration date (17) and serial number (21) and/or batch or lot number (10).
Cardinality	0...1
Type	CodeableConcept
Comments	Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD
Wound.Drain.MedicalDevice.Product.ProductType
Definition	Type of drain applied to the wound.
Cardinality	0...*
Type	string
Binding	WoundDrainType codes WoundDrainType (required)
Comments	Note that FHIR strings SHALL NOT exceed 1MB in size
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	rim: n/a
Wound.Drain.MedicalDevice.ProductDescription
Definition	Textual description of the product.
Cardinality	0...1
Type	string
Comments	Note that FHIR strings SHALL NOT exceed 1MB in size
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	rim: n/a
Wound.Drain.MedicalDevice.AnatomicalLocation
Definition	Patient’s anatomical location of the medical device used.
Cardinality	0...1
Type	HdBe-AnatomicalLocation
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	rim: n/a
Wound.Drain.MedicalDevice.Indication
Definition	The medical reason for use of the medical device.
Cardinality	0...*
Type	BackboneElement
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	rim: n/a
Wound.Drain.MedicalDevice.Indication.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Cardinality	0...1
Type	string
Mappings	rim: n/a
Wound.Drain.MedicalDevice.Indication.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Cardinality	0...*
Type	Extension
Alias	extensions, user content
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Slicing	Unordered, Open, by url(Value)
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()`
Mappings	rim: n/a rim: N/A
Wound.Drain.MedicalDevice.Indication.modifierExtension
Definition	May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).
Cardinality	0...*
Type	Extension
Modifier	True
Summary	True
Alias	extensions, user content, modifiers
Requirements	Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()`
Mappings	rim: n/a rim: N/A
Wound.Drain.MedicalDevice.Indication.Problem
Definition	Root concept of the Problem information model. A problem describes a situation with regard to an individual’s health and/or welfare. This situation can be described by the patient himselve (in the form of a complaint) or by their healthprofessional (in the form of a diagnosis, for example).
Cardinality	1...1
Type	Reference(HdBe-Problem)
Comments	References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))`
Mappings	rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity)
Wound.Drain.MedicalDevice.StartDate
Definition	The start date of the first use or implant of the medical device. A ‘vague’ date, such as only the year, is permitted.
Cardinality	0...1
Type	dateTime
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	rim: n/a
Wound.Drain.MedicalDevice.EindDatum
Definition	The end date of the last use or explant of the medical device. A ‘vague’ date, such as only the year, is permitted.
Cardinality	0...1
Type	dateTime
Alias	EndDate
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	rim: n/a
Wound.Drain.MedicalDevice.Comment
Definition	Comment about use or information on the medical device used.
Cardinality	0...1
Type	string
Comments	Note that FHIR strings SHALL NOT exceed 1MB in size
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	rim: n/a
Wound.Drain.MedicalDevice.Location
Definition	The healthcare organization at which use of the medical device was initiated or where the aid was implanted.
Cardinality	0...1
Type	BackboneElement
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	rim: n/a
Wound.Drain.MedicalDevice.Location.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Cardinality	0...1
Type	string
Mappings	rim: n/a
Wound.Drain.MedicalDevice.Location.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Cardinality	0...*
Type	Extension
Alias	extensions, user content
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Slicing	Unordered, Open, by url(Value)
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()`
Mappings	rim: n/a rim: N/A
Wound.Drain.MedicalDevice.Location.modifierExtension
Definition	May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).
Cardinality	0...*
Type	Extension
Modifier	True
Summary	True
Alias	extensions, user content, modifiers
Requirements	Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()`
Mappings	rim: n/a rim: N/A
Wound.Drain.MedicalDevice.Location.HealthcareOrganization
Definition	Root concept of the Healthcare Organization information model. This root concept contains all data elements of the Healthcare Organization information model.
Cardinality	1...1
Type	Reference(HdBe-HealthcareOrganization)
Comments	References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))`
Mappings	rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity)
Wound.Drain.MedicalDevice.HealthProfessional
Definition	The healthcare professional involved in the indication for use of the medical device implant.
Cardinality	0...1
Type	Reference(HdBe-HealthProfessional)
Comments	References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))`
Mappings	rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity)
Wound.WoundImage
Definition	A photo of the wound.
Cardinality	0...*
Type	base64Binary
Comments	A stream of bytes, base64 encoded
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	rim: n/a
Wound.Comment
Definition	Comment on the wound.
Cardinality	0...1
Type	string
Comments	Note that FHIR strings SHALL NOT exceed 1MB in size
Invariants	ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())`
Mappings	rim: n/a

Example instances

[CBB name]
[Concept name ]	[example value]

// example of NameInformation

## Example instances

| NameInformation      |                   |
|----------------------|-------------------|
| FirstNames | Johanna Petronella Maria   
| Initials | J.P.M. 
| GivenName | Jo 
| NameUsage | Geslachtsnaam partner gevolgd door eigen geslachtsnaam
| LastName.Prefix | van
| LastName.LastName | Putten
| LastNamePartner.PartnerPrefix | van der
| LastNamePartner.PartnerLastName | Giessen
| Titles |

zib [zib name + version](https://zibs.nl/wiki/[zib name + version(release)]) difference

Concept	Category	Description
`[element.path]`	[category of change]	[Description of change]([Reference to ticket/issue/zulip chat using MarkDown link])

Terminology Bindings

Path	Name	Strength	URL
WoundType	WoundType	extensible	https://fhir.healthdata.be/ValueSet/WoundType
WoundMoisture	WoundMoisture	required	https://fhir.healthdata.be/ValueSet/WoundMoisture
WoundEdge	WoundEdge	extensible	https://fhir.healthdata.be/ValueSet/WoundEdge
Drain.MedicalDevice.Product.ProductType	WoundDrainType	required	https://fhir.healthdata.be/ValueSet/WoundDrainType