• bdl-7: FullUrl must be unique in a bundle, or else entries with the same fullUrl must have different meta.versionId (except in history bundles)
  (type = 'history') or entry.where(fullUrl.exists()).select(fullUrl&iif(resource.meta.versionId.exists(), resource.meta.versionId, '')).isDistinct()
• bdl-9: A document must have an identifier with a system and a value
  type = 'document' implies (identifier.system.exists() and identifier.value.exists())
• bdl-17: Use and meaning of issues for documents has not been validated because the content will not be rendered in the document.
  type = 'document' implies issues.empty()
• bdl-16: Issue.severity for all issues within the OperationOutcome must be either 'information' or 'warning'.
  issues.exists() implies (issues.issue.severity = 'information' or issues.issue.severity = 'warning')
• bdl-18: Self link is required for searchsets.
  type = 'searchset' implies link.where(relation = 'self' and url.exists()).exists()
• bdl-13: A subscription-notification must have a SubscriptionStatus as the first resource
  type = 'subscription-notification' implies entry.first().resource.is(SubscriptionStatus)
• bdl-12: A message must have a MessageHeader as the first resource
  type = 'message' implies entry.first().resource.is(MessageHeader)
• bdl-15: Bundle resources where type is not transaction, transaction-response, batch, or batch-response or when the request is a POST SHALL have Bundle.entry.fullUrl populated
  type='transaction' or type='transaction-response' or type='batch' or type='batch-response' or entry.all(fullUrl.exists() or request.method='POST')
• bdl-14: entry.request.method PATCH not allowed for history
  type = 'history' implies entry.request.method != 'PATCH'
• bdl-11: A document must have a Composition as the first resource
  type = 'document' implies entry.first().resource.is(Composition)
• bdl-10: A document must have a date
  type = 'document' implies (timestamp.hasValue())
• bdl-3d: For collections of type transaction-response or batch-response, all entries must contain response elements
  type in ('transaction-response' | 'batch-response') implies entry.all(response.exists())
• bdl-1: total only when a search or history
  total.empty() or (type = 'searchset') or (type = 'history')
• bdl-2: entry.search only when a search
  (type = 'searchset') or entry.search.empty()
• bdl-3a: For collections of type document, message, searchset or collection, all entries must contain resources, and not have request or response elements
  type in ('document' | 'message' | 'searchset' | 'collection') implies entry.all(resource.exists() and request.empty() and response.empty())
• bdl-3c: For collections of type transaction or batch, all entries must contain request elements, and resources if the method is POST, PUT or PATCH
  type in ('transaction' | 'batch') implies entry.all(request.method.exists() and ((request.method in ('POST' | 'PATCH' | 'PUT')) = resource.exists()))
• bdl-3b: For collections of type history, all entries must contain request or response elements, and resources if the method is POST, PUT or PATCH
  type = 'history' implies entry.all(request.exists() and response.exists() and ((request.method in ('POST' | 'PATCH' | 'PUT')) = resource.exists()))

• rim: n/a
• rim: Entity. Role, or Act
• w5: infrastructure.structure
• v2: N/A
• rim: N/A
• cda: ClinicalDocument, if bundle.type = document

Within the context of the FHIR RESTful interactions, the resource has an id except for cases like the create and conditional update. Otherwise, the use of the resouce id depends on the given use case.

• ele-1: All FHIR elements must have a @value or children
  hasValue() or (children().count() > id.count())

• rim: n/a
• rim: N/A

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of its narrative along with other profiles, value sets, etc.

• ele-1: All FHIR elements must have a @value or children
  hasValue() or (children().count() > id.count())

• rim: n/a

Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

• ele-1: All FHIR elements must have a @value or children
  hasValue() or (children().count() > id.count())

• rim: n/a

Persistent identity generally only matters for batches of type Document, Message, and Collection. It would not normally be populated for search and history results and servers ignore Bundle.identifier when processing batches and transactions. For Documents the .identifier SHALL be populated such that the .identifier is globally unique.

• ele-1: All FHIR elements must have a @value or children
  hasValue() or (children().count() > id.count())
• ident-1: Identifier with no value has limited utility. If communicating that an identifier value has been suppressed or missing, the value element SHOULD be present with an extension indicating the missing semantic - e.g. data-absent-reason
  value.exists()

• rim: n/a
• v2: CX / EI (occasionally, more often EI maps to a resource id or a URL)
• rim: II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT]
• servd: Identifier
• w5: FiveWs.identifier
• cda: ClinicalDocument.id

• rim: n/a

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

• ele-1: All FHIR elements must have a @value or children
  hasValue() or (children().count() > id.count())
• ext-1: Must have either extensions or value[x], not both
  extension.exists() != value.exists()

• rim: n/a
• rim: N/A

Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

• ele-1: All FHIR elements must have a @value or children
  hasValue() or (children().count() > id.count())

• rim: n/a
• v2: N/A
• rim: Role.code or implied by context

Allows users to make use of identifiers when the identifier system is not known.

This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

• ele-1: All FHIR elements must have a @value or children
  hasValue() or (children().count() > id.count())

• rim: n/a
• v2: CE/CNE/CWE
• rim: CD
• orim: fhir:CodeableConcept rdfs:subClassOf dt:CD
• v2: CX.5
• rim: Role.code or implied by context

• rim: n/a

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

• ele-1: All FHIR elements must have a @value or children
  hasValue() or (children().count() > id.count())
• ext-1: Must have either extensions or value[x], not both
  extension.exists() != value.exists()

• rim: n/a
• rim: N/A

Allows for alternative encodings within a code system, and translations to other code systems.

Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

• ele-1: All FHIR elements must have a @value or children
  hasValue() or (children().count() > id.count())
• cod-1: A Coding SHOULD NOT have a display unless a code is also present. Computation on Coding.display alone is generally unsafe. Consider using CodeableConcept.text
  code.exists().not() implies display.exists().not()

• rim: n/a
• v2: CE/CNE/CWE subset one of the sets of component 1-3 or 4-6
• rim: CV
• orim: fhir:Coding rdfs:subClassOf dt:CDCoding
• v2: C*E.1-8, C*E.10-22
• rim: union(., ./translation)
• orim: fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding

The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

Very often the text is the same as a displayName of one of the codings.

• ele-1: All FHIR elements must have a @value or children
  hasValue() or (children().count() > id.count())

Annual Calibration and Conductivity Probe Replaced

• rim: n/a
• v2: C*E.9. But note many systems use C*E.2 for this
• rim: ./originalText[mediaType/code="text/plain"]/data
• orim: fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText

There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

Identifier.system is always case sensitive.

• ele-1: All FHIR elements must have a @value or children
  hasValue() or (children().count() > id.count())

• rim: n/a
• v2: CX.4 / EI-2-4
• rim: II.root or Role.id.root
• servd: ./IdentifierType

If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the http://hl7.org/fhir/StructureDefinition/rendered-value). Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

• ele-1: All FHIR elements must have a @value or children
  hasValue() or (children().count() > id.count())

• rim: n/a
• v2: CX.1 / EI.1
• rim: II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root)
• servd: ./Value

A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times").

Period is not used for a duration (a measure of elapsed time). See Duration.

• ele-1: All FHIR elements must have a @value or children
  hasValue() or (children().count() > id.count())
• per-1: If present, start SHALL have a lower or equal value than end
  start.hasValue().not() or end.hasValue().not() or (start.lowBoundary() <= end.highBoundary())

• rim: n/a
• v2: DR
• rim: IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"]
• v2: CX.7 + CX.8
• rim: Role.effectiveTime or implied by context
• servd: ./StartDate and ./EndDate

The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.

• ele-1: All FHIR elements must have a @value or children
  hasValue() or (children().count() > id.count())
• ref-1: SHALL have a contained resource if a local reference is provided
  reference.exists() implies (reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')) or (reference='#' and %rootResource!=%resource))
• ref-2: At least one of reference, identifier and display SHALL be present (unless an extension is provided).
  reference.exists() or identifier.exists() or display.exists() or extension.exists()

• rim: n/a
• rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity)
• v2: CX.4 / (CX.4,CX.9,CX.10)
• rim: II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper
• servd: ./IdentifierIssuingAuthority

It's possible to use a bundle for other purposes (e.g. a document can be accepted as a transaction). This is primarily defined so that there can be specific rules for some of the bundle types.

• ele-1: All FHIR elements must have a @value or children
  hasValue() or (children().count() > id.count())

collection

• rim: n/a
• w5: FiveWs.class

For many bundles, the timestamp is equal to .meta.lastUpdated, because they are not stored (e.g. search results). When a bundle is placed in a persistent store, .meta.lastUpdated will be usually be changed by the server. When the bundle is a message, a middleware agent altering the message (even if not stored) SHOULD update .meta.lastUpdated. .timestamp is used to track the original time of the Bundle, and SHOULD be populated.

Usage:

• document : the date the document was created. Note: the composition may predate the document, or be associated with multiple documents. The date of the composition - the authoring time - may be earlier than the document assembly time
• message : the date that the content of the message was assembled. This date is not changed by middleware engines unless they add additional data that changes the meaning of the time of the message
• history : the date that the history was assembled. This time would be used as the _since time to ask for subsequent updates
• searchset : the time that the search set was assembled. Note that different pages MAY have different timestamps but need not. Having different timestamps does not imply that subsequent pages will represent or include changes made since the initial query
• transaction | transaction-response | batch | batch-response | collection : no particular assigned meaning

The timestamp value should be greater than the lastUpdated and other timestamps in the resources in the bundle, and it should be equal or earlier than the .meta.lastUpdated on the Bundle itself.

• ele-1: All FHIR elements must have a @value or children
  hasValue() or (children().count() > id.count())

• rim: n/a
• w5: FiveWs.init
• cda: ClinicalDocument.effectiveTime

Only used if the bundle is a search result set. The total does not include resources such as OperationOutcome and included resources, only the total number of matching resources.

• ele-1: All FHIR elements must have a @value or children
  hasValue() or (children().count() > id.count())

• rim: n/a

Both Bundle.link and Bundle.entry.link are defined to support providing additional context when Bundles are used (e.g. HATEOAS).

Bundle.entry.link corresponds to links found in the HTTP header if the resource in the entry was read directly.

This specification defines some specific uses of Bundle.link for searching and paging, but no specific uses for Bundle.entry.link, and no defined function in a transaction - the meaning is implementation specific. The behavior of navigation link types (next/prev/first/last) are well defined for searchset and history Bundles but are not currently defined for other types. Implementers who choose to use such link relationships for other bundle types will need to negotiate behavior with their interoperability partners.

• ele-1: All FHIR elements must have a @value or children
  hasValue() or (children().count() > id.count())

• rim: n/a

• rim: n/a

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

• ele-1: All FHIR elements must have a @value or children
  hasValue() or (children().count() > id.count())
• ext-1: Must have either extensions or value[x], not both
  extension.exists() != value.exists()

• rim: n/a
• rim: N/A

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

• ele-1: All FHIR elements must have a @value or children
  hasValue() or (children().count() > id.count())
• ext-1: Must have either extensions or value[x], not both
  extension.exists() != value.exists()

• rim: n/a
• rim: N/A

Note that FHIR strings SHALL NOT exceed 1,048,576 (1024*1024) characters in size

• ele-1: All FHIR elements must have a @value or children
  hasValue() or (children().count() > id.count())

• rim: n/a

see http://en.wikipedia.org/wiki/Uniform_resource_identifier

• ele-1: All FHIR elements must have a @value or children
  hasValue() or (children().count() > id.count())

• rim: n/a

• ele-1: All FHIR elements must have a @value or children
  hasValue() or (children().count() > id.count())
• bdl-8: fullUrl cannot be a version specific reference
  fullUrl.exists() implies fullUrl.contains('/_history/').not()
• bdl-5: must be a resource unless there's a request or response
  resource.exists() or request.exists() or response.exists()

• rim: n/a

• rim: n/a

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

• ele-1: All FHIR elements must have a @value or children
  hasValue() or (children().count() > id.count())
• ext-1: Must have either extensions or value[x], not both
  extension.exists() != value.exists()

• rim: n/a
• rim: N/A

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

• ele-1: All FHIR elements must have a @value or children
  hasValue() or (children().count() > id.count())
• ext-1: Must have either extensions or value[x], not both
  extension.exists() != value.exists()

• rim: n/a
• rim: N/A

fullUrl might not be unique in the context of a resource. Note that since FHIR resources do not need to be served through the FHIR API, the fullURL might be a URN or an absolute URL that does not end with the logical id of the resource (Resource.id). However, but if the fullUrl does look like a RESTful server URL (e.g. meets the regex, then the 'id' portion of the fullUrl SHALL end with the Resource.id.

Note that the fullUrl is not the same as the canonical URL - it's an absolute url for an endpoint serving the resource (these will happen to have the same value on the canonical server for the resource with the canonical URL).

• ele-1: All FHIR elements must have a @value or children
  hasValue() or (children().count() > id.count())

• rim: n/a

• rim: n/a
• rim: Entity. Role, or Act

Within the context of the FHIR RESTful interactions, the resource has an id except for cases like the create and conditional update. Otherwise, the use of the resouce id depends on the given use case.

• ele-1: All FHIR elements must have a @value or children
  hasValue() or (children().count() > id.count())

• rim: n/a
• rim: N/A

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of its narrative along with other profiles, value sets, etc.

• ele-1: All FHIR elements must have a @value or children
  hasValue() or (children().count() > id.count())

• rim: n/a

Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

• ele-1: All FHIR elements must have a @value or children
  hasValue() or (children().count() > id.count())

• rim: n/a

Procedure | Device

• ele-1: All FHIR elements must have a @value or children
  hasValue() or (children().count() > id.count())

• rim: n/a

• rim: n/a

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

• ele-1: All FHIR elements must have a @value or children
  hasValue() or (children().count() > id.count())
• ext-1: Must have either extensions or value[x], not both
  extension.exists() != value.exists()

• rim: n/a
• rim: N/A

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

• ele-1: All FHIR elements must have a @value or children
  hasValue() or (children().count() > id.count())
• ext-1: Must have either extensions or value[x], not both
  extension.exists() != value.exists()

• rim: n/a
• rim: N/A

There is only one mode. In some corner cases, a resource may be included because it is both a match and an include. In these circumstances, 'match' takes precedence.

• ele-1: All FHIR elements must have a @value or children
  hasValue() or (children().count() > id.count())

• rim: n/a

Servers are not required to return a ranking score. 1 is most relevant, and 0 is least relevant. Often, search results are sorted by score, but the client may specify a different sort order.

See Patient Match for the EMPI search which relates to this element.

• ele-1: All FHIR elements must have a @value or children
  hasValue() or (children().count() > id.count())

• rim: n/a

• ele-1: All FHIR elements must have a @value or children
  hasValue() or (children().count() > id.count())

• rim: n/a

• rim: n/a

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

• ele-1: All FHIR elements must have a @value or children
  hasValue() or (children().count() > id.count())
• ext-1: Must have either extensions or value[x], not both
  extension.exists() != value.exists()

• rim: n/a
• rim: N/A

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

• ele-1: All FHIR elements must have a @value or children
  hasValue() or (children().count() > id.count())
• ext-1: Must have either extensions or value[x], not both
  extension.exists() != value.exists()

• rim: n/a
• rim: N/A

Note that FHIR strings SHALL NOT exceed 1,048,576 (1024*1024) characters in size

• ele-1: All FHIR elements must have a @value or children
  hasValue() or (children().count() > id.count())

• rim: n/a

E.g. for a Patient Create, the method would be "POST" and the URL would be "Patient". For a Patient Update, the method would be PUT and the URL would be "Patient/[id]".

• ele-1: All FHIR elements must have a @value or children
  hasValue() or (children().count() > id.count())

• rim: n/a

Note that FHIR strings SHALL NOT exceed 1,048,576 (1024*1024) characters in size

• ele-1: All FHIR elements must have a @value or children
  hasValue() or (children().count() > id.count())

• rim: n/a

Note: This is intended for where precisely observed times are required, typically system logs etc., and not human-reported times - for them, see date and dateTime (which can be as precise as instant, but is not required to be) below. UTC offset is always required

• ele-1: All FHIR elements must have a @value or children
  hasValue() or (children().count() > id.count())

• rim: n/a

Note that FHIR strings SHALL NOT exceed 1,048,576 (1024*1024) characters in size

• ele-1: All FHIR elements must have a @value or children
  hasValue() or (children().count() > id.count())

• rim: n/a

Note that FHIR strings SHALL NOT exceed 1,048,576 (1024*1024) characters in size

• ele-1: All FHIR elements must have a @value or children
  hasValue() or (children().count() > id.count())

• rim: n/a

• ele-1: All FHIR elements must have a @value or children
  hasValue() or (children().count() > id.count())

• rim: n/a

• rim: n/a

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

• ele-1: All FHIR elements must have a @value or children
  hasValue() or (children().count() > id.count())
• ext-1: Must have either extensions or value[x], not both
  extension.exists() != value.exists()

• rim: n/a
• rim: N/A

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

• ele-1: All FHIR elements must have a @value or children
  hasValue() or (children().count() > id.count())
• ext-1: Must have either extensions or value[x], not both
  extension.exists() != value.exists()

• rim: n/a
• rim: N/A

Note that FHIR strings SHALL NOT exceed 1,048,576 (1024*1024) characters in size

• ele-1: All FHIR elements must have a @value or children
  hasValue() or (children().count() > id.count())

• rim: n/a

see http://en.wikipedia.org/wiki/Uniform_resource_identifier

• ele-1: All FHIR elements must have a @value or children
  hasValue() or (children().count() > id.count())

• rim: n/a

Etags match the Resource.meta.versionId. The ETag has to match the version id in the header if a resource is included.

• ele-1: All FHIR elements must have a @value or children
  hasValue() or (children().count() > id.count())

• rim: n/a

This has to match the same time in the meta header (meta.lastUpdated) if a resource is included.

• ele-1: All FHIR elements must have a @value or children
  hasValue() or (children().count() > id.count())

• rim: n/a

For a POST/PUT operation, this is the equivalent outcome that would be returned for prefer = operationoutcome - except that the resource is always returned whether or not the outcome is returned.

This outcome is not used for error responses in batch/transaction, only for hints and warnings. In a batch operation, the error will be in Bundle.entry.response, and for transaction, there will be a single OperationOutcome instead of a bundle in the case of an error.

• rim: n/a
• rim: Entity. Role, or Act

A Signature holds an electronic representation of a signature and its supporting context in a FHIR accessible form. The signature may either be a cryptographic type (XML DigSig or a JWS), which is able to provide non-repudiation proof, or it may be a graphical image that represents a signature or a signature process. This element allows capturing signatures on documents, messages, transactions or even search responses, to support content-authentication, non-repudiation or other business cases. This is primarily relevant where the bundle may travel through multiple hops or via other mechanisms where HTTPS non-repudiation is insufficient.

The signature could be created by the "author" of the bundle or by the originating device. Requirements around inclusion of a signature, verification of signatures and treatment of signed/non-signed bundles is implementation-environment specific.

• ele-1: All FHIR elements must have a @value or children
  hasValue() or (children().count() > id.count())

• rim: n/a
• rim: N/A

Usage notes: These issues and warnings must apply to the Bundle as a whole, not to individual entries.Messages relating to the processing of individual entries (e.g. in a batch or transaction) SHALL be reported in the entry.response.outcome for that entry. If there are errors that arise in the creation of the Bundle, then that should be handled by an OperationOutcome being returned instead of the Bundle.

• dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources
  contained.contained.empty()
• dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated
  contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()
• dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource
  contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().ofType(canonical) | %resource.descendants().ofType(uri) | %resource.descendants().ofType(url))) or descendants().where(reference = '#').exists() or descendants().where(ofType(canonical) = '#').exists() or descendants().where(ofType(canonical) = '#').exists()).not()).trace('unmatched', id).empty()
• dom-6: A resource should have narrative for robust management
  text.`div`.exists()
• dom-5: If a resource is contained in another resource, it SHALL NOT have a security label
  contained.meta.security.empty()

• rim: n/a
• rim: Entity. Role, or Act
• rim: Entity, Role, or Act
• w5: infrastructure.exchange
• rim: Grouping is handled through multiple repetitions from whatever context references the outcomes (no specific grouper required)