<status value="active" /> <date value="2023-03-22T12:18:11.6743763+00:00" /> <publisher value="Vivian Furlan" /> <description value="Resumo ou sumário referente a uma prescrição de exames/serviços a um paciente dentro do ecossistema de saúde Dasa." /> <purpose value="Reportar para Ecossistema dados mínimos referentes a uma prescrição de exames, de forma a possibilitar seu compartilhamento entre profissionais de saúde, o próprio indivíduo que recebeu o atendimento, assim como possibilitar o uso secundário das informações para atividades faturamento, auditoria, formulação e monitoramento de políticas de compartilhamento de dados. Escopo incial: Prescrições." /> <fhirVersion value="4.0.1" /> <kind value="resource" /> <abstract value="false" /> <type value="ServiceRequest" /> <baseDefinition value="http://hl7.org/fhir/StructureDefinition/ServiceRequest" /> <derivation value="constraint" /> <snapshot> <element id="ServiceRequest"> <path value="ServiceRequest" /> <short value="Solicitação de serviço a ser executado" /> <definition value="Um registro de uma solicitação de serviço, como investigações diagnósticas, tratamentos ou operações a serem realizadas." /> <alias value="diagnostic request" /> <alias value="referral" /> <alias value="referral request" /> <alias value="transfer of care request" /> <min value="0" /> <max value="*" /> <base> <path value="ServiceRequest" /> <min value="0" /> <max value="*" /> </base> <constraint> <key value="dom-2" /> <severity value="error" /> <human value="If the resource is contained in another resource, it SHALL NOT contain nested Resources" /> <expression value="contained.contained.empty()" /> <xpath value="not(parent::f:contained and f:contained)" /> <source value="http://hl7.org/fhir/StructureDefinition/DomainResource" /> </constraint> <constraint> <key value="dom-4" /> <severity value="error" /> <human value="If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated" /> <expression value="contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()" /> <xpath value="not(exists(f:contained/*/f:meta/f:versionId)) and not(exists(f:contained/*/f:meta/f:lastUpdated))" /> <source value="http://hl7.org/fhir/StructureDefinition/DomainResource" /> </constraint> <constraint> <key value="dom-3" /> <severity value="error" /> <human value="If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource" /> <expression value="contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty()" /> <xpath value="not(exists(for $id in f:contained/*/f:id/@value return $contained[not(parent::*/descendant::f:reference/@value=concat('#', $contained/*/id/@value) or descendant::f:reference[@value='#'])]))" /> <source value="http://hl7.org/fhir/StructureDefinition/DomainResource" /> </constraint> <constraint> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bestpractice"> <valueBoolean value="true" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bestpractice-explanation"> <valueMarkdown value="When a resource has no narrative, only systems that fully understand the data can display the resource to a human safely. Including a human readable representation in the resource makes for a much more robust eco-system and cheaper handling of resources by intermediary systems. Some ecosystems restrict distribution of resources to only those systems that do fully understand the resources, and as a consequence implementers may believe that the narrative is superfluous. However experience shows that such eco-systems often open up to new participants over time." /> </extension> <key value="dom-6" /> <severity value="warning" /> <human value="A resource should have narrative for robust management" /> <expression value="text.`div`.exists()" /> <xpath value="exists(f:text/h:div)" /> <source value="http://hl7.org/fhir/StructureDefinition/DomainResource" /> </constraint> <constraint> <key value="dom-5" /> <severity value="error" /> <human value="If a resource is contained in another resource, it SHALL NOT have a security label" /> <expression value="contained.meta.security.empty()" /> <xpath value="not(exists(f:contained/*/f:meta/f:security))" /> <source value="http://hl7.org/fhir/StructureDefinition/DomainResource" /> </constraint> <constraint> <key value="prr-1" /> <severity value="error" /> <human value="orderDetail SHALL only be present if code is present" /> <expression value="orderDetail.empty() or code.exists()" /> <xpath value="exists(f:code) or not(exists(f:orderDetail))" /> <source value="http://hl7.org/fhir/StructureDefinition/ServiceRequest" /> </constraint> <mapping> <identity value="rim" /> <map value="Entity. Role, or Act" /> </mapping> <mapping> <identity value="workflow" /> <map value="Request" /> </mapping> <mapping> <identity value="v2" /> <map value="ORC" /> </mapping> <mapping> <identity value="rim" /> <map value="Act[moodCode<=INT]" /> </mapping> </element> <element id="ServiceRequest.id"> <path value="ServiceRequest.id" /> <short value="Logical id of this artifact" /> <definition value="The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes." /> <comment value="The only time that a resource does not have an id is when it is being submitted to the server using a create operation." /> <min value="0" /> <max value="1" /> <base> <path value="Resource.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="id" /> </extension> <code value="id" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="ServiceRequest.meta"> <path value="ServiceRequest.meta" /> <short value="Metadata about the resource" /> <definition value="The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource." /> <min value="0" /> <max value="1" /> <base> <path value="Resource.meta" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Meta" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="ServiceRequest.implicitRules"> <path value="ServiceRequest.implicitRules" /> <short value="A set of rules under which this content was created" /> <definition value="A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc." /> <comment value="Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc." /> <min value="0" /> <max value="1" /> <base> <path value="Resource.implicitRules" /> <min value="0" /> <max value="1" /> </base> <type> <code value="uri" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isModifier value="true" /> <isModifierReason value="This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="ServiceRequest.language"> <path value="ServiceRequest.language" /> <short value="Language of the resource content" /> <definition value="The base language in which the resource is written." /> <comment value="Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute)." /> <min value="0" /> <max value="1" /> <base> <path value="Resource.language" /> <min value="0" /> <max value="1" /> </base> <type> <code value="code" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-maxValueSet"> <valueCanonical value="http://hl7.org/fhir/ValueSet/all-languages" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="Language" /> </extension> <strength value="preferred" /> <description value="A human language." /> <valueSet value="http://hl7.org/fhir/ValueSet/languages" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="ServiceRequest.text"> <path value="ServiceRequest.text" /> <short value="Text summary of the resource, for human interpretation" /> <definition value="A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety." /> <comment value="Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later." /> <alias value="narrative" /> <alias value="html" /> <alias value="xhtml" /> <alias value="display" /> <min value="0" /> <max value="1" /> <base> <path value="DomainResource.text" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Narrative" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> <mapping> <identity value="rim" /> <map value="Act.text?" /> </mapping> </element> <element id="ServiceRequest.contained"> <path value="ServiceRequest.contained" /> <short value="Contained, inline Resources" /> <definition value="These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope." /> <comment value="This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels." /> <alias value="inline resources" /> <alias value="anonymous resources" /> <alias value="contained resources" /> <min value="0" /> <max value="*" /> <base> <path value="DomainResource.contained" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Resource" /> </type> <mapping> <identity value="rim" /> <map value="Entity. Role, or Act" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="ServiceRequest.extension"> <path value="ServiceRequest.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="DomainResource.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="ServiceRequest.modifierExtension"> <path value="ServiceRequest.modifierExtension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Extensions that cannot be ignored" /> <definition value="May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself)." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <requirements value="Modifier extensions allow for extensions that *cannot* be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the [definition of modifier extensions](extensibility.html#modifierExtension)." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="DomainResource.modifierExtension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <isModifier value="true" /> <isModifierReason value="Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="ServiceRequest.identifier"> <path value="ServiceRequest.identifier" /> <slicing> <discriminator> <type value="value" /> <path value="system" /> </discriminator> <rules value="open" /> </slicing> <short value="Identificadores atribuídos a este pedido" /> <definition value="Identificadores atribuídos a esta instância do pedido pelo solicitante e/ou destinatário e/ou executor do pedido." /> <comment value="O elemento identifier.type é usado para distinguir entre os identificadores atribuídos pelo solicitador (conhecido como 'Placer' em HL7 v2) e o produtor das observações em resposta ao pedido (conhecido como 'Filler' em HL7 v2). Para mais discussão e exemplos, consulte a seção de notas de recursos abaixo." /> <min value="0" /> <max value="*" /> <base> <path value="ServiceRequest.identifier" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Identifier" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CX / EI (occasionally, more often EI maps to a resource id or a URL)" /> </mapping> <mapping> <identity value="rim" /> <map value="II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT]" /> </mapping> <mapping> <identity value="servd" /> <map value="Identifier" /> </mapping> <mapping> <identity value="workflow" /> <map value="Request.identifier" /> </mapping> <mapping> <identity value="w5" /> <map value="FiveWs.identifier" /> </mapping> <mapping> <identity value="v2" /> <map value="ORC.2, ORC.3, RF1-6 / RF1-11," /> </mapping> <mapping> <identity value="rim" /> <map value=".identifier" /> </mapping> <mapping> <identity value="quick" /> <map value="ClinicalStatement.identifier" /> </mapping> </element> <element id="ServiceRequest.identifier.id"> <path value="ServiceRequest.identifier.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="ServiceRequest.identifier.extension"> <path value="ServiceRequest.identifier.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="ServiceRequest.identifier.use"> <path value="ServiceRequest.identifier.use" /> <short value="usual | official | temp | secondary | old (If known)" /> <definition value="A finalidade desse identificador." /> <comment value="Os aplicativos podem assumir que um identificador é permanente, a menos que diga explicitamente que é temporário." /> <requirements value="Permite que o identificador apropriado para um determinado contexto de uso seja selecionado entre um conjunto de identificadores." /> <min value="1" /> <max value="1" /> <base> <path value="Identifier.use" /> <min value="0" /> <max value="1" /> </base> <type> <code value="code" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isModifier value="true" /> <isModifierReason value="Isso é rotulado como "É modificador" porque os aplicativos não devem confundir um ID temporário com um permanente" /> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="IdentifierUse" /> </extension> <strength value="required" /> <description value="Identifica a finalidade desse identificador, se conhecido." /> <valueSet value="http://hl7.org/fhir/ValueSet/identifier-use" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="N/A" /> </mapping> <mapping> <identity value="rim" /> <map value="Role.code or implied by context" /> </mapping> </element> <element id="ServiceRequest.identifier.type"> <path value="ServiceRequest.identifier.type" /> <short value="Descrição do identificador" /> <definition value="Um tipo codificado para o identificador que pode ser usado para determinar qual identificador usar para uma finalidade específica." /> <comment value="Este elemento lida apenas com categorias gerais de identificadores. Não DEVE ser usado para códigos que correspondem 1..1 com o Identifier.system. Alguns identificadores podem cair em várias categorias devido ao uso comum. Onde o sistema é conhecido, um tipo é desnecessário porque o tipo sempre faz parte da definição do sistema. No entanto, os sistemas geralmente precisam lidar com identificadores onde o sistema não é conhecido. Não existe uma relação 1:1 entre tipo e sistema, pois muitos sistemas diferentes têm o mesmo tipo." /> <requirements value="Permite que os usuários façam uso de identificadores quando o sistema identificador não é conhecido." /> <min value="0" /> <max value="0" /> <base> <path value="Identifier.type" /> <min value="0" /> <max value="1" /> </base> <type> <code value="CodeableConcept" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="IdentifierType" /> </extension> <strength value="extensible" /> <description value="A coded type for an identifier that can be used to determine which identifier to use for a specific purpose." /> <valueSet value="http://hl7.org/fhir/ValueSet/identifier-type" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CE/CNE/CWE" /> </mapping> <mapping> <identity value="rim" /> <map value="CD" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:CodeableConcept rdfs:subClassOf dt:CD" /> </mapping> <mapping> <identity value="v2" /> <map value="CX.5" /> </mapping> <mapping> <identity value="rim" /> <map value="Role.code or implied by context" /> </mapping> </element> <element id="ServiceRequest.identifier.type.id"> <path value="ServiceRequest.identifier.type.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="ServiceRequest.identifier.type.extension"> <path value="ServiceRequest.identifier.type.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="ServiceRequest.identifier.type.coding"> <path value="ServiceRequest.identifier.type.coding" /> <short value="Código definido por um sistema de terminologia" /> <definition value="Uma referência a um código definido por um sistema de terminologia." /> <comment value="Os códigos podem ser definidos muito casualmente em enumerações ou listas de códigos, até definições muito formais, como SNOMED CT - consulte os Princípios Básicos do HL7 v3 para obter mais informações. A ordem das codificações é indefinida e NÃO DEVE ser usada para inferir significado. Geralmente, no máximo, apenas um dos valores de codificação será rotulado como UserSelected = true." /> <requirements value="Permite codificações alternativas dentro de um sistema de código e traduções para outros sistemas de código." /> <min value="0" /> <max value="*" /> <base> <path value="CodeableConcept.coding" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Coding" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CE/CNE/CWE subset one of the sets of component 1-3 or 4-6" /> </mapping> <mapping> <identity value="rim" /> <map value="CV" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:Coding rdfs:subClassOf dt:CDCoding" /> </mapping> <mapping> <identity value="v2" /> <map value="C*E.1-8, C*E.10-22" /> </mapping> <mapping> <identity value="rim" /> <map value="union(., ./translation)" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding" /> </mapping> </element> <element id="ServiceRequest.identifier.type.coding.id"> <path value="ServiceRequest.identifier.type.coding.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="ServiceRequest.identifier.type.coding.extension"> <path value="ServiceRequest.identifier.type.coding.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="ServiceRequest.identifier.type.coding.system"> <path value="ServiceRequest.identifier.type.coding.system" /> <short value="Identidade do sistema de terminologia" /> <definition value="A identificação do sistema de código que define o significado do símbolo no código." /> <comment value="O URI pode ser um OID (urn:oid:...) ou um UUID (urn:uuid:...). OIDs e UUIDs DEVEM ser referências ao registro HL7 OID. Caso contrário, o URI deve vir da lista do HL7 de URIs especiais definidos pelo FHIR ou deve fazer referência a alguma definição que estabeleça o sistema de forma clara e inequívoca." /> <requirements value="Precisa ser inequívoco sobre a origem da definição do símbolo." /> <min value="0" /> <max value="1" /> <base> <path value="Coding.system" /> <min value="0" /> <max value="1" /> </base> <type> <code value="uri" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="C*E.3" /> </mapping> <mapping> <identity value="rim" /> <map value="./codeSystem" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem" /> </mapping> </element> <element id="ServiceRequest.identifier.type.coding.version"> <path value="ServiceRequest.identifier.type.coding.version" /> <short value="Version of the system - if relevant" /> <definition value="The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged." /> <comment value="Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date." /> <min value="0" /> <max value="0" /> <base> <path value="Coding.version" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="C*E.7" /> </mapping> <mapping> <identity value="rim" /> <map value="./codeSystemVersion" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion" /> </mapping> </element> <element id="ServiceRequest.identifier.type.coding.code"> <path value="ServiceRequest.identifier.type.coding.code" /> <short value="Symbol in syntax defined by the system" /> <definition value="A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination)." /> <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" /> <requirements value="Need to refer to a particular code in the system." /> <min value="0" /> <max value="1" /> <base> <path value="Coding.code" /> <min value="0" /> <max value="1" /> </base> <type> <code value="code" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="C*E.1" /> </mapping> <mapping> <identity value="rim" /> <map value="./code" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code" /> </mapping> </element> <element id="ServiceRequest.identifier.type.coding.display"> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable"> <valueBoolean value="true" /> </extension> <path value="ServiceRequest.identifier.type.coding.display" /> <short value="Representation defined by the system" /> <definition value="A representation of the meaning of the code in the system, following the rules of the system." /> <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" /> <requirements value="Need to be able to carry a human-readable meaning of the code for readers that do not know the system." /> <min value="0" /> <max value="1" /> <base> <path value="Coding.display" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="C*E.2 - but note this is not well followed" /> </mapping> <mapping> <identity value="rim" /> <map value="CV.displayName" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName" /> </mapping> </element> <element id="ServiceRequest.identifier.type.coding.userSelected"> <path value="ServiceRequest.identifier.type.coding.userSelected" /> <short value="If this coding was chosen directly by the user" /> <definition value="Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays)." /> <comment value="Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely." /> <requirements value="This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing." /> <min value="0" /> <max value="0" /> <base> <path value="Coding.userSelected" /> <min value="0" /> <max value="1" /> </base> <type> <code value="boolean" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="Sometimes implied by being first" /> </mapping> <mapping> <identity value="rim" /> <map value="CD.codingRationale" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]" /> </mapping> </element> <element id="ServiceRequest.identifier.type.text"> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable"> <valueBoolean value="true" /> </extension> <path value="ServiceRequest.identifier.type.text" /> <short value="Plain text representation of the concept" /> <definition value="A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user." /> <comment value="Very often the text is the same as a displayName of one of the codings." /> <requirements value="The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source." /> <min value="0" /> <max value="1" /> <base> <path value="CodeableConcept.text" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="C*E.9. But note many systems use C*E.2 for this" /> </mapping> <mapping> <identity value="rim" /> <map value="./originalText[mediaType/code="text/plain"]/data" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText" /> </mapping> </element> <element id="ServiceRequest.identifier.system"> <path value="ServiceRequest.identifier.system" /> <short value="O namespace para o valor do identificador" /> <definition value="Estabelece o namespace para o valor - ou seja, uma URL que descreve um conjunto de valores exclusivos. Na Dasa NameSystem são usados para diferenciar os diferentes sistemas de origem. O namesystem é usado para criar identificadores únicos para sistemas e organizações dentro de uma rede de interoperabilidade. Esses identificadores são necessários para que diferentes sistemas possam se comunicar e compartilhar informações de forma segura e confiável. O namesystem do FHIR é baseado em padrões internacionais e permite a criação de identificadores únicos que são independentes do sistema de origem. Isso ajuda a garantir que os dados sejam consistentes e precisos em toda a rede de interoperabilidade. O namesystem também suporta a validação de identificadores e fornece um mecanismo para registrar novos sistemas e organizações na rede." /> <comment value="Identifier.system sempre diferencia maiúsculas de minúsculas." /> <requirements value="Existem muitos conjuntos de identificadores. Para realizar a correspondência de dois identificadores, precisamos saber com qual conjunto estamos lidando. O sistema identifica um determinado conjunto de identificadores exclusivos." /> <min value="1" /> <max value="1" /> <base> <path value="Identifier.system" /> <min value="0" /> <max value="1" /> </base> <type> <code value="uri" /> </type> <example> <label value="General" /> <valueUri value="http://www.acme.com/identifiers/patient" /> </example> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CX.4 / EI-2-4" /> </mapping> <mapping> <identity value="rim" /> <map value="II.root or Role.id.root" /> </mapping> <mapping> <identity value="servd" /> <map value="./IdentifierType" /> </mapping> </element> <element id="ServiceRequest.identifier.value"> <path value="ServiceRequest.identifier.value" /> <short value="O valor que é único" /> <definition value="A porção do identificador normalmente relevante para o usuário e que é única dentro do contexto do sistema." /> <comment value="Se o valor for um URI completo, o sistema DEVERÁ ser urn:ietf:rfc:3986. O objetivo principal do valor é o mapeamento computacional. Como resultado, pode ser normalizado para fins de comparação (por exemplo, remoção de espaços em branco não significativos, traços, etc.) Um valor formatado para exibição humana pode ser transmitido usando a [extensão de valor renderizado](extension-rendered-value.html). Identifier.value deve ser tratado com distinção entre maiúsculas e minúsculas, a menos que o conhecimento do Identifier.system permita que o processador tenha certeza de que o processamento sem distinção entre maiúsculas e minúsculas é seguro." /> <min value="1" /> <max value="1" /> <base> <path value="Identifier.value" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <example> <label value="General" /> <valueString value="123456" /> </example> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CX.1 / EI.1" /> </mapping> <mapping> <identity value="rim" /> <map value="II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root)" /> </mapping> <mapping> <identity value="servd" /> <map value="./Value" /> </mapping> </element> <element id="ServiceRequest.identifier.period"> <path value="ServiceRequest.identifier.period" /> <short value="Time period when id is/was valid for use" /> <definition value="Time period during which identifier is/was valid for use." /> <comment value="A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See [Duration](datatypes.html#Duration)." /> <min value="0" /> <max value="0" /> <base> <path value="Identifier.period" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Period" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="per-1" /> <severity value="error" /> <human value="If present, start SHALL have a lower value than end" /> <expression value="start.hasValue().not() or end.hasValue().not() or (start <= end)" /> <xpath value="not(exists(f:start/@value)) or not(exists(f:end/@value)) or (xs:dateTime(f:start/@value) <= xs:dateTime(f:end/@value))" /> <source value="http://hl7.org/fhir/StructureDefinition/Period" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="DR" /> </mapping> <mapping> <identity value="rim" /> <map value="IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"]" /> </mapping> <mapping> <identity value="v2" /> <map value="CX.7 + CX.8" /> </mapping> <mapping> <identity value="rim" /> <map value="Role.effectiveTime or implied by context" /> </mapping> <mapping> <identity value="servd" /> <map value="./StartDate and ./EndDate" /> </mapping> </element> <element id="ServiceRequest.identifier.assigner"> <path value="ServiceRequest.identifier.assigner" /> <short value="Organization that issued id (may be just text)" /> <definition value="Organization that issued/manages the identifier." /> <comment value="The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization." /> <min value="0" /> <max value="0" /> <base> <path value="Identifier.assigner" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Reference" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Organization" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ref-1" /> <severity value="error" /> <human value="SHALL have a contained resource if a local reference is provided" /> <expression value="reference.exists() implies (reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')) or (reference='#' and %rootResource!=%resource))" /> <xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Reference" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" /> </mapping> <mapping> <identity value="v2" /> <map value="CX.4 / (CX.4,CX.9,CX.10)" /> </mapping> <mapping> <identity value="rim" /> <map value="II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper" /> </mapping> <mapping> <identity value="servd" /> <map value="./IdentifierIssuingAuthority" /> </mapping> </element> <element id="ServiceRequest.identifier:dasa-navtelemed-prescricao-real_id"> <path value="ServiceRequest.identifier" /> <sliceName value="dasa-navtelemed-prescricao-real_id" /> <short value="Identificador(es) pelo(s) qual(is) este encontro é conhecido" /> <definition value="Identificadores atribuídos a esta instância do pedido pelo solicitante e/ou destinatário e/ou executor do pedido." /> <comment value="Este identificador é legado." /> <min value="0" /> <max value="*" /> <base> <path value="ServiceRequest.identifier" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Identifier" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CX / EI (occasionally, more often EI maps to a resource id or a URL)" /> </mapping> <mapping> <identity value="rim" /> <map value="II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT]" /> </mapping> <mapping> <identity value="servd" /> <map value="Identifier" /> </mapping> <mapping> <identity value="workflow" /> <map value="Request.identifier" /> </mapping> <mapping> <identity value="w5" /> <map value="FiveWs.identifier" /> </mapping> <mapping> <identity value="v2" /> <map value="ORC.2, ORC.3, RF1-6 / RF1-11," /> </mapping> <mapping> <identity value="rim" /> <map value=".identifier" /> </mapping> <mapping> <identity value="quick" /> <map value="ClinicalStatement.identifier" /> </mapping> </element> <element id="ServiceRequest.identifier:dasa-navtelemed-prescricao-real_id.id"> <path value="ServiceRequest.identifier.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="ServiceRequest.identifier:dasa-navtelemed-prescricao-real_id.extension"> <path value="ServiceRequest.identifier.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="ServiceRequest.identifier:dasa-navtelemed-prescricao-real_id.use"> <path value="ServiceRequest.identifier.use" /> <short value="usual | official | temp | secondary | old (If known)" /> <definition value="A finalidade desse identificador." /> <comment value="Os aplicativos podem assumir que um identificador é permanente, a menos que diga explicitamente que é temporário." /> <requirements value="Permite que o identificador apropriado para um determinado contexto de uso seja selecionado entre um conjunto de identificadores." /> <min value="1" /> <max value="1" /> <base> <path value="Identifier.use" /> <min value="0" /> <max value="1" /> </base> <type> <code value="code" /> </type> <fixedCode value="usual" /> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isModifier value="true" /> <isModifierReason value="Isso é rotulado como "É modificador" porque os aplicativos não devem confundir um ID temporário com um permanente." /> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="IdentifierUse" /> </extension> <strength value="required" /> <description value="Identifies the purpose for this identifier, if known ." /> <valueSet value="http://hl7.org/fhir/ValueSet/identifier-use|4.0.1" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="N/A" /> </mapping> <mapping> <identity value="rim" /> <map value="Role.code or implied by context" /> </mapping> </element> <element id="ServiceRequest.identifier:dasa-navtelemed-prescricao-real_id.type"> <path value="ServiceRequest.identifier.type" /> <short value="Description of identifier" /> <definition value="A coded type for the identifier that can be used to determine which identifier to use for a specific purpose." /> <comment value="This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type." /> <requirements value="Allows users to make use of identifiers when the identifier system is not known." /> <min value="0" /> <max value="0" /> <base> <path value="Identifier.type" /> <min value="0" /> <max value="1" /> </base> <type> <code value="CodeableConcept" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="IdentifierType" /> </extension> <strength value="extensible" /> <description value="A coded type for an identifier that can be used to determine which identifier to use for a specific purpose." /> <valueSet value="http://hl7.org/fhir/ValueSet/identifier-type" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CE/CNE/CWE" /> </mapping> <mapping> <identity value="rim" /> <map value="CD" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:CodeableConcept rdfs:subClassOf dt:CD" /> </mapping> <mapping> <identity value="v2" /> <map value="CX.5" /> </mapping> <mapping> <identity value="rim" /> <map value="Role.code or implied by context" /> </mapping> </element> <element id="ServiceRequest.identifier:dasa-navtelemed-prescricao-real_id.system"> <path value="ServiceRequest.identifier.system" /> <short value="O namespace para o valor do identificador" /> <definition value="Estabelece o namespace para o valor - ou seja, uma URL que descreve um conjunto de valores exclusivos." /> <comment value="Identifier.system sempre diferencia maiúsculas de minúsculas." /> <requirements value="Existem muitos conjuntos de identificadores. Para realizar a correspondência de dois identificadores, precisamos saber com qual conjunto estamos lidando. O sistema identifica um determinado conjunto de identificadores exclusivos." /> <min value="1" /> <max value="1" /> <base> <path value="Identifier.system" /> <min value="0" /> <max value="1" /> </base> <type> <code value="uri" /> </type> <fixedUri value="https://interoperabilidade.dasa.com.br/fhir/NamingSystem/dasa-navtelemed-prescricao-real_id" /> <example> <label value="General" /> <valueUri value="http://www.acme.com/identifiers/patient" /> </example> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CX.4 / EI-2-4" /> </mapping> <mapping> <identity value="rim" /> <map value="II.root or Role.id.root" /> </mapping> <mapping> <identity value="servd" /> <map value="./IdentifierType" /> </mapping> </element> <element id="ServiceRequest.identifier:dasa-navtelemed-prescricao-real_id.value"> <path value="ServiceRequest.identifier.value" /> <short value="O valor que é único" /> <definition value="A porção do identificador normalmente relevante para o usuário e que é única dentro do contexto do sistema." /> <comment value="Se o valor for um URI completo, o sistema DEVERÁ ser urn:ietf:rfc:3986. O objetivo principal do valor é o mapeamento computacional. Como resultado, pode ser normalizado para fins de comparação (por exemplo, remoção de espaços em branco não significativos, traços, etc.) Um valor formatado para exibição humana pode ser transmitido usando a [extensão de valor renderizado](extension-rendered-value.html). Identifier.value deve ser tratado com distinção entre maiúsculas e minúsculas, a menos que o conhecimento do Identifier.system permita que o processador tenha certeza de que o processamento sem distinção entre maiúsculas e minúsculas é seguro." /> <min value="1" /> <max value="1" /> <base> <path value="Identifier.value" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <example> <label value="General" /> <valueString value="123456" /> </example> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CX.1 / EI.1" /> </mapping> <mapping> <identity value="rim" /> <map value="II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root)" /> </mapping> <mapping> <identity value="servd" /> <map value="./Value" /> </mapping> </element> <element id="ServiceRequest.identifier:dasa-navtelemed-prescricao-real_id.period"> <path value="ServiceRequest.identifier.period" /> <short value="Time period when id is/was valid for use" /> <definition value="Time period during which identifier is/was valid for use." /> <comment value="A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See [Duration](datatypes.html#Duration)." /> <min value="0" /> <max value="0" /> <base> <path value="Identifier.period" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Period" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="per-1" /> <severity value="error" /> <human value="If present, start SHALL have a lower value than end" /> <expression value="start.hasValue().not() or end.hasValue().not() or (start <= end)" /> <xpath value="not(exists(f:start/@value)) or not(exists(f:end/@value)) or (xs:dateTime(f:start/@value) <= xs:dateTime(f:end/@value))" /> <source value="http://hl7.org/fhir/StructureDefinition/Period" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="DR" /> </mapping> <mapping> <identity value="rim" /> <map value="IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"]" /> </mapping> <mapping> <identity value="v2" /> <map value="CX.7 + CX.8" /> </mapping> <mapping> <identity value="rim" /> <map value="Role.effectiveTime or implied by context" /> </mapping> <mapping> <identity value="servd" /> <map value="./StartDate and ./EndDate" /> </mapping> </element> <element id="ServiceRequest.identifier:dasa-navtelemed-prescricao-real_id.assigner"> <path value="ServiceRequest.identifier.assigner" /> <short value="Organization that issued id (may be just text)" /> <definition value="Organization that issued/manages the identifier." /> <comment value="The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization." /> <min value="0" /> <max value="0" /> <base> <path value="Identifier.assigner" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Reference" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Organization" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ref-1" /> <severity value="error" /> <human value="SHALL have a contained resource if a local reference is provided" /> <expression value="reference.exists() implies (reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')) or (reference='#' and %rootResource!=%resource))" /> <xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Reference" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" /> </mapping> <mapping> <identity value="v2" /> <map value="CX.4 / (CX.4,CX.9,CX.10)" /> </mapping> <mapping> <identity value="rim" /> <map value="II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper" /> </mapping> <mapping> <identity value="servd" /> <map value="./IdentifierIssuingAuthority" /> </mapping> </element> <element id="ServiceRequest.identifier:dasa-navtelemed-prescricao-nav"> <path value="ServiceRequest.identifier" /> <sliceName value="dasa-navtelemed-prescricao-nav" /> <short value="Identificador(es) pelo(s) qual(is) este encontro é conhecido" /> <definition value="Identificadores atribuídos a esta instância do pedido pelo solicitante e/ou destinatário e/ou executor do pedido." /> <comment value="Este identificador é usado para o ID de prescrição da origem para NAVTelemed." /> <min value="0" /> <max value="*" /> <base> <path value="ServiceRequest.identifier" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Identifier" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CX / EI (occasionally, more often EI maps to a resource id or a URL)" /> </mapping> <mapping> <identity value="rim" /> <map value="II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT]" /> </mapping> <mapping> <identity value="servd" /> <map value="Identifier" /> </mapping> <mapping> <identity value="workflow" /> <map value="Request.identifier" /> </mapping> <mapping> <identity value="w5" /> <map value="FiveWs.identifier" /> </mapping> <mapping> <identity value="v2" /> <map value="ORC.2, ORC.3, RF1-6 / RF1-11," /> </mapping> <mapping> <identity value="rim" /> <map value=".identifier" /> </mapping> <mapping> <identity value="quick" /> <map value="ClinicalStatement.identifier" /> </mapping> </element> <element id="ServiceRequest.identifier:dasa-navtelemed-prescricao-nav.id"> <path value="ServiceRequest.identifier.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="ServiceRequest.identifier:dasa-navtelemed-prescricao-nav.extension"> <path value="ServiceRequest.identifier.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="ServiceRequest.identifier:dasa-navtelemed-prescricao-nav.use"> <path value="ServiceRequest.identifier.use" /> <short value="usual | official | temp | secondary | old (If known)" /> <definition value="A finalidade desse identificador." /> <comment value="Os aplicativos podem assumir que um identificador é permanente, a menos que diga explicitamente que é temporário." /> <requirements value="Permite que o identificador apropriado para um determinado contexto de uso seja selecionado entre um conjunto de identificadores" /> <min value="1" /> <max value="1" /> <base> <path value="Identifier.use" /> <min value="0" /> <max value="1" /> </base> <type> <code value="code" /> </type> <fixedCode value="usual" /> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isModifier value="true" /> <isModifierReason value="Isso é rotulado como "É modificador" porque os aplicativos não devem confundir um ID temporário com um permanente.." /> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="IdentifierUse" /> </extension> <strength value="required" /> <description value="Identifies the purpose for this identifier, if known ." /> <valueSet value="http://hl7.org/fhir/ValueSet/identifier-use|4.0.1" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="N/A" /> </mapping> <mapping> <identity value="rim" /> <map value="Role.code or implied by context" /> </mapping> </element> <element id="ServiceRequest.identifier:dasa-navtelemed-prescricao-nav.type"> <path value="ServiceRequest.identifier.type" /> <short value="Description of identifier" /> <definition value="A coded type for the identifier that can be used to determine which identifier to use for a specific purpose." /> <comment value="This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type." /> <requirements value="Allows users to make use of identifiers when the identifier system is not known." /> <min value="0" /> <max value="0" /> <base> <path value="Identifier.type" /> <min value="0" /> <max value="1" /> </base> <type> <code value="CodeableConcept" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="IdentifierType" /> </extension> <strength value="extensible" /> <description value="A coded type for an identifier that can be used to determine which identifier to use for a specific purpose." /> <valueSet value="http://hl7.org/fhir/ValueSet/identifier-type" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CE/CNE/CWE" /> </mapping> <mapping> <identity value="rim" /> <map value="CD" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:CodeableConcept rdfs:subClassOf dt:CD" /> </mapping> <mapping> <identity value="v2" /> <map value="CX.5" /> </mapping> <mapping> <identity value="rim" /> <map value="Role.code or implied by context" /> </mapping> </element> <element id="ServiceRequest.identifier:dasa-navtelemed-prescricao-nav.system"> <path value="ServiceRequest.identifier.system" /> <short value="O namespace para o valor do identificador" /> <definition value="Estabelece o namespace para o valor - ou seja, uma URL que descreve um conjunto de valores exclusivos." /> <comment value="Identifier.system sempre diferencia maiúsculas de minúsculas." /> <requirements value="Existem muitos conjuntos de identificadores. Para realizar a correspondência de dois identificadores, precisamos saber com qual conjunto estamos lidando. O sistema identifica um determinado conjunto de identificadores exclusivos." /> <min value="1" /> <max value="1" /> <base> <path value="Identifier.system" /> <min value="0" /> <max value="1" /> </base> <type> <code value="uri" /> </type> <fixedUri value="https://interoperabilidade.dasa.com.br/fhir/NamingSystem/dasa-navtelemed-prescricao-nav" /> <example> <label value="General" /> <valueUri value="http://www.acme.com/identifiers/patient" /> </example> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CX.4 / EI-2-4" /> </mapping> <mapping> <identity value="rim" /> <map value="II.root or Role.id.root" /> </mapping> <mapping> <identity value="servd" /> <map value="./IdentifierType" /> </mapping> </element> <element id="ServiceRequest.identifier:dasa-navtelemed-prescricao-nav.value"> <path value="ServiceRequest.identifier.value" /> <short value="O valor que é único" /> <definition value="A porção do identificador normalmente relevante para o usuário e que é única dentro do contexto do sistema." /> <comment value="Se o valor for um URI completo, o sistema DEVERÁ ser urn:ietf:rfc:3986. O objetivo principal do valor é o mapeamento computacional. Como resultado, pode ser normalizado para fins de comparação (por exemplo, remoção de espaços em branco não significativos, traços, etc.) Um valor formatado para exibição humana pode ser transmitido usando a [extensão de valor renderizado](extension-rendered-value.html). Identifier.value deve ser tratado com distinção entre maiúsculas e minúsculas, a menos que o conhecimento do Identifier.system permita que o processador tenha certeza de que o processamento sem distinção entre maiúsculas e minúsculas é seguro." /> <min value="1" /> <max value="1" /> <base> <path value="Identifier.value" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <example> <label value="General" /> <valueString value="123456" /> </example> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CX.1 / EI.1" /> </mapping> <mapping> <identity value="rim" /> <map value="II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root)" /> </mapping> <mapping> <identity value="servd" /> <map value="./Value" /> </mapping> </element> <element id="ServiceRequest.identifier:dasa-navtelemed-prescricao-nav.period"> <path value="ServiceRequest.identifier.period" /> <short value="Time period when id is/was valid for use" /> <definition value="Time period during which identifier is/was valid for use." /> <comment value="A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See [Duration](datatypes.html#Duration)." /> <min value="0" /> <max value="0" /> <base> <path value="Identifier.period" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Period" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="per-1" /> <severity value="error" /> <human value="If present, start SHALL have a lower value than end" /> <expression value="start.hasValue().not() or end.hasValue().not() or (start <= end)" /> <xpath value="not(exists(f:start/@value)) or not(exists(f:end/@value)) or (xs:dateTime(f:start/@value) <= xs:dateTime(f:end/@value))" /> <source value="http://hl7.org/fhir/StructureDefinition/Period" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="DR" /> </mapping> <mapping> <identity value="rim" /> <map value="IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"]" /> </mapping> <mapping> <identity value="v2" /> <map value="CX.7 + CX.8" /> </mapping> <mapping> <identity value="rim" /> <map value="Role.effectiveTime or implied by context" /> </mapping> <mapping> <identity value="servd" /> <map value="./StartDate and ./EndDate" /> </mapping> </element> <element id="ServiceRequest.identifier:dasa-navtelemed-prescricao-nav.assigner"> <path value="ServiceRequest.identifier.assigner" /> <short value="Organization that issued id (may be just text)" /> <definition value="Organization that issued/manages the identifier." /> <comment value="The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization." /> <min value="0" /> <max value="0" /> <base> <path value="Identifier.assigner" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Reference" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Organization" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ref-1" /> <severity value="error" /> <human value="SHALL have a contained resource if a local reference is provided" /> <expression value="reference.exists() implies (reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')) or (reference='#' and %rootResource!=%resource))" /> <xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Reference" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" /> </mapping> <mapping> <identity value="v2" /> <map value="CX.4 / (CX.4,CX.9,CX.10)" /> </mapping> <mapping> <identity value="rim" /> <map value="II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper" /> </mapping> <mapping> <identity value="servd" /> <map value="./IdentifierIssuingAuthority" /> </mapping> </element> <element id="ServiceRequest.identifier:dasa-navtelemed-prescricao-origem"> <path value="ServiceRequest.identifier" /> <sliceName value="dasa-navtelemed-prescricao-origem" /> <short value="Identifiers assigned to this order" /> <definition value="Identifiers assigned to this order instance by the orderer and/or the receiver and/or order fulfiller." /> <comment value="Este identificador é usado para o ID de prescrição da origem para Memed." /> <min value="0" /> <max value="*" /> <base> <path value="ServiceRequest.identifier" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Identifier" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CX / EI (occasionally, more often EI maps to a resource id or a URL)" /> </mapping> <mapping> <identity value="rim" /> <map value="II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT]" /> </mapping> <mapping> <identity value="servd" /> <map value="Identifier" /> </mapping> <mapping> <identity value="workflow" /> <map value="Request.identifier" /> </mapping> <mapping> <identity value="w5" /> <map value="FiveWs.identifier" /> </mapping> <mapping> <identity value="v2" /> <map value="ORC.2, ORC.3, RF1-6 / RF1-11," /> </mapping> <mapping> <identity value="rim" /> <map value=".identifier" /> </mapping> <mapping> <identity value="quick" /> <map value="ClinicalStatement.identifier" /> </mapping> </element> <element id="ServiceRequest.identifier:dasa-navtelemed-prescricao-origem.id"> <path value="ServiceRequest.identifier.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="ServiceRequest.identifier:dasa-navtelemed-prescricao-origem.extension"> <path value="ServiceRequest.identifier.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="ServiceRequest.identifier:dasa-navtelemed-prescricao-origem.use"> <path value="ServiceRequest.identifier.use" /> <short value="usual | official | temp | secondary | old (If known)" /> <definition value="A finalidade desse identificador." /> <comment value="Os aplicativos podem assumir que um identificador é permanente, a menos que diga explicitamente que é temporário." /> <requirements value="Permite que o identificador apropriado para um determinado contexto de uso seja selecionado entre um conjunto de identificadores." /> <min value="1" /> <max value="1" /> <base> <path value="Identifier.use" /> <min value="0" /> <max value="1" /> </base> <type> <code value="code" /> </type> <fixedCode value="secondary" /> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isModifier value="true" /> <isModifierReason value="Isso é rotulado como "É modificador" porque os aplicativos não devem confundir um ID temporário com um permanente" /> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="IdentifierUse" /> </extension> <strength value="required" /> <description value="Identifies the purpose for this identifier, if known ." /> <valueSet value="http://hl7.org/fhir/ValueSet/identifier-use|4.0.1" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="N/A" /> </mapping> <mapping> <identity value="rim" /> <map value="Role.code or implied by context" /> </mapping> </element> <element id="ServiceRequest.identifier:dasa-navtelemed-prescricao-origem.type"> <path value="ServiceRequest.identifier.type" /> <short value="Description of identifier" /> <definition value="A coded type for the identifier that can be used to determine which identifier to use for a specific purpose." /> <comment value="This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type." /> <requirements value="Allows users to make use of identifiers when the identifier system is not known." /> <min value="0" /> <max value="0" /> <base> <path value="Identifier.type" /> <min value="0" /> <max value="1" /> </base> <type> <code value="CodeableConcept" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="IdentifierType" /> </extension> <strength value="extensible" /> <description value="A coded type for an identifier that can be used to determine which identifier to use for a specific purpose." /> <valueSet value="http://hl7.org/fhir/ValueSet/identifier-type" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CE/CNE/CWE" /> </mapping> <mapping> <identity value="rim" /> <map value="CD" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:CodeableConcept rdfs:subClassOf dt:CD" /> </mapping> <mapping> <identity value="v2" /> <map value="CX.5" /> </mapping> <mapping> <identity value="rim" /> <map value="Role.code or implied by context" /> </mapping> </element> <element id="ServiceRequest.identifier:dasa-navtelemed-prescricao-origem.system"> <path value="ServiceRequest.identifier.system" /> <short value="O namespace para o valor do identificador" /> <definition value="Estabelece o namespace para o valor - ou seja, uma URL que descreve um conjunto de valores exclusivos." /> <comment value="Identifier.system sempre diferencia maiúsculas de minúsculas." /> <requirements value="Existem muitos conjuntos de identificadores. Para realizar a correspondência de dois identificadores, precisamos saber com qual conjunto estamos lidando. O sistema identifica um determinado conjunto de identificadores exclusivos." /> <min value="1" /> <max value="1" /> <base> <path value="Identifier.system" /> <min value="0" /> <max value="1" /> </base> <type> <code value="uri" /> </type> <fixedUri value="https://interoperabilidade.dasa.com.br/fhir/NamingSystem/dasa-navtelemed-prescricao-origem" /> <example> <label value="General" /> <valueUri value="http://www.acme.com/identifiers/patient" /> </example> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CX.4 / EI-2-4" /> </mapping> <mapping> <identity value="rim" /> <map value="II.root or Role.id.root" /> </mapping> <mapping> <identity value="servd" /> <map value="./IdentifierType" /> </mapping> </element> <element id="ServiceRequest.identifier:dasa-navtelemed-prescricao-origem.value"> <path value="ServiceRequest.identifier.value" /> <short value="O valor que é único" /> <definition value="A porção do identificador normalmente relevante para o usuário e que é única dentro do contexto do sistema." /> <comment value="Se o valor for um URI completo, o sistema DEVERÁ ser urn:ietf:rfc:3986. O objetivo principal do valor é o mapeamento computacional. Como resultado, pode ser normalizado para fins de comparação (por exemplo, remoção de espaços em branco não significativos, traços, etc.) Um valor formatado para exibição humana pode ser transmitido usando a [extensão de valor renderizado](extension-rendered-value.html). Identifier.value deve ser tratado com distinção entre maiúsculas e minúsculas, a menos que o conhecimento do Identifier.system permita que o processador tenha certeza de que o processamento sem distinção entre maiúsculas e minúsculas é seguro." /> <min value="1" /> <max value="1" /> <base> <path value="Identifier.value" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <example> <label value="General" /> <valueString value="123456" /> </example> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CX.1 / EI.1" /> </mapping> <mapping> <identity value="rim" /> <map value="II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root)" /> </mapping> <mapping> <identity value="servd" /> <map value="./Value" /> </mapping> </element> <element id="ServiceRequest.identifier:dasa-navtelemed-prescricao-origem.period"> <path value="ServiceRequest.identifier.period" /> <short value="Time period when id is/was valid for use" /> <definition value="Time period during which identifier is/was valid for use." /> <comment value="A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See [Duration](datatypes.html#Duration)." /> <min value="0" /> <max value="0" /> <base> <path value="Identifier.period" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Period" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="per-1" /> <severity value="error" /> <human value="If present, start SHALL have a lower value than end" /> <expression value="start.hasValue().not() or end.hasValue().not() or (start <= end)" /> <xpath value="not(exists(f:start/@value)) or not(exists(f:end/@value)) or (xs:dateTime(f:start/@value) <= xs:dateTime(f:end/@value))" /> <source value="http://hl7.org/fhir/StructureDefinition/Period" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="DR" /> </mapping> <mapping> <identity value="rim" /> <map value="IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"]" /> </mapping> <mapping> <identity value="v2" /> <map value="CX.7 + CX.8" /> </mapping> <mapping> <identity value="rim" /> <map value="Role.effectiveTime or implied by context" /> </mapping> <mapping> <identity value="servd" /> <map value="./StartDate and ./EndDate" /> </mapping> </element> <element id="ServiceRequest.identifier:dasa-navtelemed-prescricao-origem.assigner"> <path value="ServiceRequest.identifier.assigner" /> <short value="Organization that issued id (may be just text)" /> <definition value="Organization that issued/manages the identifier." /> <comment value="The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization." /> <min value="0" /> <max value="0" /> <base> <path value="Identifier.assigner" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Reference" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Organization" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ref-1" /> <severity value="error" /> <human value="SHALL have a contained resource if a local reference is provided" /> <expression value="reference.exists() implies (reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')) or (reference='#' and %rootResource!=%resource))" /> <xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Reference" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" /> </mapping> <mapping> <identity value="v2" /> <map value="CX.4 / (CX.4,CX.9,CX.10)" /> </mapping> <mapping> <identity value="rim" /> <map value="II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper" /> </mapping> <mapping> <identity value="servd" /> <map value="./IdentifierIssuingAuthority" /> </mapping> </element> <element id="ServiceRequest.instantiatesCanonical"> <path value="ServiceRequest.instantiatesCanonical" /> <short value="Instantiates FHIR protocol or definition" /> <definition value="The URL pointing to a FHIR-defined protocol, guideline, orderset or other definition that is adhered to in whole or in part by this ServiceRequest." /> <comment value="Note: This is a business identifier, not a resource identifier (see [discussion](resource.html#identifiers)). It is best practice for the identifier to only appear on a single resource instance, however business practices may occasionally dictate that multiple resource instances with the same identifier can exist - possibly even with different resource types. For example, multiple Patient and a Person resource instance might share the same social insurance number." /> <min value="0" /> <max value="0" /> <base> <path value="ServiceRequest.instantiatesCanonical" /> <min value="0" /> <max value="*" /> </base> <type> <code value="canonical" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/ActivityDefinition" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/PlanDefinition" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="workflow" /> <map value="Request.instantiatesCanonical" /> </mapping> <mapping> <identity value="v2" /> <map value="Varies by domain" /> </mapping> <mapping> <identity value="rim" /> <map value=".outboundRelationship[typeCode=DEFN].target" /> </mapping> </element> <element id="ServiceRequest.instantiatesUri"> <path value="ServiceRequest.instantiatesUri" /> <short value="Instantiates external protocol or definition" /> <definition value="The URL pointing to an externally maintained protocol, guideline, orderset or other definition that is adhered to in whole or in part by this ServiceRequest." /> <comment value="This might be an HTML page, PDF, etc. or could just be a non-resolvable URI identifier." /> <min value="0" /> <max value="0" /> <base> <path value="ServiceRequest.instantiatesUri" /> <min value="0" /> <max value="*" /> </base> <type> <code value="uri" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="workflow" /> <map value="Request.instantiatesUri" /> </mapping> <mapping> <identity value="v2" /> <map value="Varies by domain" /> </mapping> <mapping> <identity value="rim" /> <map value=".outboundRelationship[typeCode=DEFN].target" /> </mapping> </element> <element id="ServiceRequest.basedOn"> <path value="ServiceRequest.basedOn" /> <short value="What request fulfills" /> <definition value="Plan/proposal/order fulfilled by this request." /> <comment value="References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository." /> <alias value="fulfills" /> <min value="0" /> <max value="0" /> <base> <path value="ServiceRequest.basedOn" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Reference" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/CarePlan" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/ServiceRequest" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/MedicationRequest" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ref-1" /> <severity value="error" /> <human value="SHALL have a contained resource if a local reference is provided" /> <expression value="reference.exists() implies (reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')) or (reference='#' and %rootResource!=%resource))" /> <xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Reference" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" /> </mapping> <mapping> <identity value="workflow" /> <map value="Request.basedOn" /> </mapping> <mapping> <identity value="v2" /> <map value="ORC.8 (plus others)" /> </mapping> <mapping> <identity value="rim" /> <map value=".outboundRelationship[typeCode=FLFS].target" /> </mapping> </element> <element id="ServiceRequest.replaces"> <path value="ServiceRequest.replaces" /> <short value="What request replaces" /> <definition value="The request takes the place of the referenced completed or terminated request(s)." /> <comment value="References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository." /> <alias value="supersedes" /> <alias value="prior" /> <alias value="renewed order" /> <min value="0" /> <max value="0" /> <base> <path value="ServiceRequest.replaces" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Reference" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/ServiceRequest" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ref-1" /> <severity value="error" /> <human value="SHALL have a contained resource if a local reference is provided" /> <expression value="reference.exists() implies (reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')) or (reference='#' and %rootResource!=%resource))" /> <xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Reference" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" /> </mapping> <mapping> <identity value="workflow" /> <map value="Request.replaces" /> </mapping> <mapping> <identity value="v2" /> <map value="Handled by message location of ORC (ORC.1=RO or RU)" /> </mapping> <mapping> <identity value="rim" /> <map value=".outboundRelationship[typeCode=RPLC].target" /> </mapping> </element> <element id="ServiceRequest.requisition"> <path value="ServiceRequest.requisition" /> <short value="Composite Request ID" /> <definition value="A shared identifier common to all service requests that were authorized more or less simultaneously by a single author, representing the composite or group identifier." /> <comment value="Requests are linked either by a "basedOn" relationship (i.e. one request is fulfilling another) or by having a common requisition. Requests that are part of the same requisition are generally treated independently from the perspective of changing their state or maintaining them after initial creation." /> <requirements value="Some business processes need to know if multiple items were ordered as part of the same "requisition" for billing or other purposes." /> <alias value="grouperId" /> <alias value="groupIdentifier" /> <min value="0" /> <max value="0" /> <base> <path value="ServiceRequest.requisition" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Identifier" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CX / EI (occasionally, more often EI maps to a resource id or a URL)" /> </mapping> <mapping> <identity value="rim" /> <map value="II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT]" /> </mapping> <mapping> <identity value="servd" /> <map value="Identifier" /> </mapping> <mapping> <identity value="workflow" /> <map value="Request.groupIdentifier" /> </mapping> <mapping> <identity value="v2" /> <map value="ORC.4" /> </mapping> <mapping> <identity value="rim" /> <map value=".inboundRelationship(typeCode=COMP].source[moodCode=INT].identifier" /> </mapping> </element> <element id="ServiceRequest.status"> <path value="ServiceRequest.status" /> <short value="draft | active | on-hold | revoked | completed | entered-in-error | unknown" /> <definition value="O status do pedido." /> <comment value="O status geralmente está totalmente sob controle do solicitante - eles determinam se o pedido é rascunho ou ativo e, depois de ativado, concluído, cancelado ou suspenso. Os estados relativos às atividades do performer são refletidos no evento correspondente (consulte [Event Pattern](event.html) para discussão geral) ou usando o recurso [Task](task.html)." /> <min value="1" /> <max value="1" /> <base> <path value="ServiceRequest.status" /> <min value="1" /> <max value="1" /> </base> <type> <code value="code" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isModifier value="true" /> <isModifierReason value="Este elemento é rotulado como um modificador porque é um elemento de status que contém o status inserido com erro, o que significa que o recurso não deve ser tratado como válido" /> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="ServiceRequestStatus" /> </extension> <strength value="required" /> <description value="O status de uma ordem de serviço." /> <valueSet value="http://hl7.org/fhir/ValueSet/request-status" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="workflow" /> <map value="Request.status" /> </mapping> <mapping> <identity value="w5" /> <map value="FiveWs.status" /> </mapping> <mapping> <identity value="v2" /> <map value="ORC.5,RF1-1" /> </mapping> <mapping> <identity value="rim" /> <map value=".status" /> </mapping> <mapping> <identity value="quick" /> <map value="Action.currentStatus" /> </mapping> </element> <element id="ServiceRequest.intent"> <path value="ServiceRequest.intent" /> <short value="proposal | plan | directive | order | original-order | reflex-order | filler-order | instance-order | option" /> <definition value="Seja a solicitação uma proposta, plano, pedido original ou pedido reflexo." /> <comment value="Esse elemento é rotulado como um modificador porque a intenção altera quando e como o recurso é realmente aplicável." /> <min value="1" /> <max value="1" /> <base> <path value="ServiceRequest.intent" /> <min value="1" /> <max value="1" /> </base> <type> <code value="code" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isModifier value="true" /> <isModifierReason value="Este elemento altera a interpretação de todos os atributos descritivos. Por exemplo, "a hora em que a solicitação é recomendada" vs. "a hora em que a solicitação é autorizada a ocorrer" ou "quem é recomendado para realizar a solicitação" vs. "quem está autorizado a realizar a solicitação." /> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="ServiceRequestIntent" /> </extension> <strength value="required" /> <description value="O tipo de solicitação de serviço." /> <valueSet value="http://hl7.org/fhir/ValueSet/request-intent|4.0.1" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="workflow" /> <map value="Request.intent" /> </mapping> <mapping> <identity value="w5" /> <map value="FiveWs.class" /> </mapping> <mapping> <identity value="v2" /> <map value="N/A" /> </mapping> <mapping> <identity value="rim" /> <map value=".moodCode (nuances beyond PRP/PLAN/RQO would need to be elsewhere)" /> </mapping> </element> <element id="ServiceRequest.category"> <path value="ServiceRequest.category" /> <short value="Classification of service" /> <definition value="A code that classifies the service for searching, sorting and display purposes (e.g. "Surgical Procedure")." /> <comment value="There may be multiple axis of categorization depending on the context or use case for retrieving or displaying the resource. The level of granularity is defined by the category concepts in the value set." /> <requirements value="Used for filtering what service request are retrieved and displayed." /> <min value="0" /> <max value="0" /> <base> <path value="ServiceRequest.category" /> <min value="0" /> <max value="*" /> </base> <type> <code value="CodeableConcept" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="ServiceRequestCategory" /> </extension> <strength value="example" /> <description value="Classification of the requested service." /> <valueSet value="http://hl7.org/fhir/ValueSet/servicerequest-category" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CE/CNE/CWE" /> </mapping> <mapping> <identity value="rim" /> <map value="CD" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:CodeableConcept rdfs:subClassOf dt:CD" /> </mapping> <mapping> <identity value="w5" /> <map value="FiveWs.class" /> </mapping> <mapping> <identity value="v2" /> <map value="RF1-5" /> </mapping> <mapping> <identity value="rim" /> <map value=".outboundRelationship[typeCode="COMP].target[classCode="LIST", moodCode="INT"].code" /> </mapping> </element> <element id="ServiceRequest.priority"> <path value="ServiceRequest.priority" /> <short value="routine | urgent | asap | stat" /> <definition value="Indicates how quickly the ServiceRequest should be addressed with respect to other requests." /> <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" /> <min value="0" /> <max value="0" /> <base> <path value="ServiceRequest.priority" /> <min value="0" /> <max value="1" /> </base> <type> <code value="code" /> </type> <meaningWhenMissing value="If missing, this task should be performed with normal priority" /> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="ServiceRequestPriority" /> </extension> <strength value="required" /> <description value="Identifies the level of importance to be assigned to actioning the request." /> <valueSet value="http://hl7.org/fhir/ValueSet/request-priority|4.0.1" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="workflow" /> <map value="Request.priority" /> </mapping> <mapping> <identity value="w5" /> <map value="FiveWs.grade" /> </mapping> <mapping> <identity value="v2" /> <map value="TQ1.9, RF1-2" /> </mapping> <mapping> <identity value="rim" /> <map value=".priorityCode" /> </mapping> </element> <element id="ServiceRequest.doNotPerform"> <path value="ServiceRequest.doNotPerform" /> <short value="True if service/procedure should not be performed" /> <definition value="Set this to true if the record is saying that the service/procedure should NOT be performed." /> <comment value="In general, only the code and timeframe will be present, though occasional additional qualifiers such as body site or even performer could be included to narrow the scope of the prohibition. If the ServiceRequest.code and ServiceRequest.doNotPerform both contain negation, that will reinforce prohibition and should not have a double negative interpretation." /> <requirements value="Used for do not ambulate, do not elevate head of bed, do not flush NG tube, do not take blood pressure on a certain arm, etc." /> <min value="0" /> <max value="0" /> <base> <path value="ServiceRequest.doNotPerform" /> <min value="0" /> <max value="1" /> </base> <type> <code value="boolean" /> </type> <meaningWhenMissing value="If missing, the request is a positive request e.g. "do perform"" /> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isModifier value="true" /> <isModifierReason value="If true this element negates the specified action. For Example, instead of a request for a procedure, it is a request for the procedure to not occur." /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="workflow" /> <map value="Request.doNotPerform" /> </mapping> <mapping> <identity value="rim" /> <map value=".actionNegationInd" /> </mapping> </element> <element id="ServiceRequest.code"> <path value="ServiceRequest.code" /> <short value="O que está sendo solicitado/pedido" /> <definition value="Um código que identifica um determinado serviço (ou seja, procedimento, investigação diagnóstica ou painel de investigações) que foi solicitado." /> <comment value="Muitos códigos de procedimento de laboratório e radiologia incorporam o sistema de amostra/órgão no nome do pedido de teste, por exemplo, soro ou soro/glicose plasmática ou uma radiografia de tórax. A amostra pode não ser registrada separadamente do código do teste." /> <alias value="service requested" /> <min value="0" /> <max value="1" /> <base> <path value="ServiceRequest.code" /> <min value="0" /> <max value="1" /> </base> <type> <code value="CodeableConcept" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="ServiceRequestCode" /> </extension> <strength value="example" /> <description value="Códigos para testes ou serviços que podem ser realizados por um indivíduo, organização ou serviço de saúde designado. Para laboratório, LOINC é (preferencial)[http://build.fhir.org/terminologies.html#preferred] e um conjunto de valores usando códigos de pedido LOINC está disponível [aqui](valueset-diagnostic-requests.html)." /> <valueSet value="https://www.vivianteste.example.com.br/fhir/r4/CodeSystem/tuss" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CE/CNE/CWE" /> </mapping> <mapping> <identity value="rim" /> <map value="CD" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:CodeableConcept rdfs:subClassOf dt:CD" /> </mapping> <mapping> <identity value="workflow" /> <map value="Request.code" /> </mapping> <mapping> <identity value="w5" /> <map value="FiveWs.what[x]" /> </mapping> <mapping> <identity value="v2" /> <map value="PR1-3 / OBR-4 (varies by domain)" /> </mapping> <mapping> <identity value="rim" /> <map value=".code" /> </mapping> <mapping> <identity value="quick" /> <map value="Procedure.procedureCode" /> </mapping> </element> <element id="ServiceRequest.code.id"> <path value="ServiceRequest.code.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="ServiceRequest.code.extension"> <path value="ServiceRequest.code.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="ServiceRequest.code.coding"> <path value="ServiceRequest.code.coding" /> <short value="Código definido por um sistema de terminologia" /> <definition value="Uma referência a um código definido por um sistema de terminologia." /> <comment value="Os códigos podem ser definidos muito casualmente em enumerações ou listas de códigos, até definições muito formais, como SNOMED CT - consulte os Princípios Básicos do HL7 v3 para obter mais informações. A ordem das codificações é indefinida e NÃO DEVE ser usada para inferir significado. Geralmente, no máximo, apenas um dos valores de codificação será rotulado como UserSelected = true." /> <requirements value="Permite codificações alternativas dentro de um sistema de código e traduções para outros sistemas de código." /> <min value="0" /> <max value="*" /> <base> <path value="CodeableConcept.coding" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Coding" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CE/CNE/CWE subset one of the sets of component 1-3 or 4-6" /> </mapping> <mapping> <identity value="rim" /> <map value="CV" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:Coding rdfs:subClassOf dt:CDCoding" /> </mapping> <mapping> <identity value="v2" /> <map value="C*E.1-8, C*E.10-22" /> </mapping> <mapping> <identity value="rim" /> <map value="union(., ./translation)" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding" /> </mapping> </element> <element id="ServiceRequest.code.coding.id"> <path value="ServiceRequest.code.coding.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="ServiceRequest.code.coding.extension"> <path value="ServiceRequest.code.coding.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="ServiceRequest.code.coding.system"> <path value="ServiceRequest.code.coding.system" /> <short value="Identidade do sistema de terminologia" /> <definition value="A identificação do sistema de código que define o significado do símbolo no código." /> <comment value="O URI pode ser um OID (urn:oid:...) ou um UUID (urn:uuid:...). OIDs e UUIDs DEVEM ser referências ao registro HL7 OID. Caso contrário, o URI deve vir da lista do HL7 de URIs especiais definidos pelo FHIR ou deve fazer referência a alguma definição que estabeleça o sistema de forma clara e inequívoca." /> <requirements value="Precisa ser inequívoco sobre a origem da definição do símbolo." /> <min value="0" /> <max value="1" /> <base> <path value="Coding.system" /> <min value="0" /> <max value="1" /> </base> <type> <code value="uri" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <binding> <strength value="example" /> <description value="Códigos para serviços que podem ser realizados por um indivíduo, organização ou serviço de saúde designado." /> <valueSet value="https://www.vivianteste.example.com.br/fhir/r4/CodeSystem/tuss" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="C*E.3" /> </mapping> <mapping> <identity value="rim" /> <map value="./codeSystem" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem" /> </mapping> </element> <element id="ServiceRequest.code.coding.version"> <path value="ServiceRequest.code.coding.version" /> <short value="Version of the system - if relevant" /> <definition value="The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged." /> <comment value="Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date." /> <min value="0" /> <max value="0" /> <base> <path value="Coding.version" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="C*E.7" /> </mapping> <mapping> <identity value="rim" /> <map value="./codeSystemVersion" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion" /> </mapping> </element> <element id="ServiceRequest.code.coding.code"> <path value="ServiceRequest.code.coding.code" /> <short value="Símbolo na sintaxe definida pelo sistema" /> <definition value="Um símbolo na sintaxe definida pelo sistema. O símbolo pode ser um código predefinido ou uma expressão em uma sintaxe definida pelo sistema de codificação (por exemplo, pós-coordenação)." /> <comment value="Observe que as strings FHIR NÃO DEVEM exceder 1 MB de tamanho" /> <requirements value="Necessidade de se referir a um determinado código no sistema." /> <min value="0" /> <max value="1" /> <base> <path value="Coding.code" /> <min value="0" /> <max value="1" /> </base> <type> <code value="code" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="C*E.1" /> </mapping> <mapping> <identity value="rim" /> <map value="./code" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code" /> </mapping> </element> <element id="ServiceRequest.code.coding.display"> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable"> <valueBoolean value="true" /> </extension> <path value="ServiceRequest.code.coding.display" /> <short value="Representação definida pelo sistema" /> <definition value="Uma representação do significado do código no sistema, seguindo as regras do sistema." /> <comment value="Observe que as strings FHIR NÃO DEVEM exceder 1 MB de tamanho" /> <requirements value="Precisa ser capaz de transmitir um significado do código legível por humanos para leitores que não conhecem o sistema." /> <min value="0" /> <max value="1" /> <base> <path value="Coding.display" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="C*E.2 - but note this is not well followed" /> </mapping> <mapping> <identity value="rim" /> <map value="CV.displayName" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName" /> </mapping> </element> <element id="ServiceRequest.code.coding.userSelected"> <path value="ServiceRequest.code.coding.userSelected" /> <short value="If this coding was chosen directly by the user" /> <definition value="Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays)." /> <comment value="Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely." /> <requirements value="This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing." /> <min value="0" /> <max value="0" /> <base> <path value="Coding.userSelected" /> <min value="0" /> <max value="1" /> </base> <type> <code value="boolean" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="Sometimes implied by being first" /> </mapping> <mapping> <identity value="rim" /> <map value="CD.codingRationale" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]" /> </mapping> </element> <element id="ServiceRequest.code.text"> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable"> <valueBoolean value="true" /> </extension> <path value="ServiceRequest.code.text" /> <short value="Plain text representation of the concept" /> <definition value="A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user." /> <comment value="Very often the text is the same as a displayName of one of the codings." /> <requirements value="The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source." /> <min value="0" /> <max value="0" /> <base> <path value="CodeableConcept.text" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="C*E.9. But note many systems use C*E.2 for this" /> </mapping> <mapping> <identity value="rim" /> <map value="./originalText[mediaType/code="text/plain"]/data" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText" /> </mapping> </element> <element id="ServiceRequest.orderDetail"> <path value="ServiceRequest.orderDetail" /> <short value="Additional order information" /> <definition value="Additional details and instructions about the how the services are to be delivered. For example, and order for a urinary catheter may have an order detail for an external or indwelling catheter, or an order for a bandage may require additional instructions specifying how the bandage should be applied." /> <comment value="For information from the medical record intended to support the delivery of the requested services, use the `supportingInformation` element." /> <alias value="detailed instructions" /> <min value="0" /> <max value="0" /> <base> <path value="ServiceRequest.orderDetail" /> <min value="0" /> <max value="*" /> </base> <type> <code value="CodeableConcept" /> </type> <condition value="ele-1" /> <condition value="prr-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="OrderDetail" /> </extension> <strength value="example" /> <description value="Codified order entry details which are based on order context." /> <valueSet value="http://hl7.org/fhir/ValueSet/servicerequest-orderdetail" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CE/CNE/CWE" /> </mapping> <mapping> <identity value="rim" /> <map value="CD" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:CodeableConcept rdfs:subClassOf dt:CD" /> </mapping> <mapping> <identity value="v2" /> <map value="NTE" /> </mapping> <mapping> <identity value="rim" /> <map value=".code" /> </mapping> <mapping> <identity value="quick" /> <map value="Procedure.procedureCode" /> </mapping> </element> <element id="ServiceRequest.quantity[x]"> <path value="ServiceRequest.quantity[x]" /> <short value="Service amount" /> <definition value="An amount of service being requested which can be a quantity ( for example $1,500 home modification), a ratio ( for example, 20 half day visits per month), or a range (2.0 to 1.8 Gy per fraction)." /> <requirements value="When ordering a service the number of service items may need to be specified separately from the the service item." /> <min value="0" /> <max value="0" /> <base> <path value="ServiceRequest.quantity[x]" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Quantity" /> </type> <type> <code value="Ratio" /> </type> <type> <code value="Range" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="NTE" /> </mapping> <mapping> <identity value="rim" /> <map value=".quantity" /> </mapping> </element> <element id="ServiceRequest.subject"> <path value="ServiceRequest.subject" /> <short value="Indivíduo ou Entidade para a qual o serviço é solicitado" /> <definition value="Em quem ou o que o serviço deve ser executado. Isso geralmente é um paciente humano, mas também pode ser solicitado em animais, grupos de humanos ou animais, dispositivos como máquinas de diálise ou até mesmo locais (normalmente para exames ambientais)." /> <comment value="As referências DEVEM ser uma referência a um recurso FHIR real e DEVEM ser resolvíveis (permitindo controle de acesso, indisponibilidade temporária, etc.). A resolução pode ser por recuperação da URL ou, quando aplicável por tipo de recurso, tratando uma referência absoluta como uma URL canônica e procurando-a em um registro/repositório local." /> <min value="1" /> <max value="1" /> <base> <path value="ServiceRequest.subject" /> <min value="1" /> <max value="1" /> </base> <type> <code value="Reference" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Patient" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Group" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Location" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Device" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ref-1" /> <severity value="error" /> <human value="SHALL have a contained resource if a local reference is provided" /> <expression value="reference.exists() implies (reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')) or (reference='#' and %rootResource!=%resource))" /> <xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Reference" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" /> </mapping> <mapping> <identity value="workflow" /> <map value="Request.subject" /> </mapping> <mapping> <identity value="w5" /> <map value="FiveWs.subject[x]" /> </mapping> <mapping> <identity value="v2" /> <map value="PID" /> </mapping> <mapping> <identity value="rim" /> <map value=".participation[typeCode=SBJ].role" /> </mapping> <mapping> <identity value="quick" /> <map value="ClinicalStatement.subject" /> </mapping> <mapping> <identity value="w5" /> <map value="FiveWs.subject" /> </mapping> </element> <element id="ServiceRequest.subject.id"> <path value="ServiceRequest.subject.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="ServiceRequest.subject.extension"> <path value="ServiceRequest.subject.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="ServiceRequest.subject.reference"> <path value="ServiceRequest.subject.reference" /> <short value="Referência literal, URL relativa, interna ou absoluta" /> <definition value="Uma referência a um local no qual o outro recurso é encontrado. A referência pode ser uma referência relativa, caso em que é relativa à URL base do serviço, ou uma URL absoluta que resolve para o local onde o recurso é encontrado. A referência pode ser específica da versão ou não. Se a referência não for a um servidor FHIR RESTful, deve-se presumir que seja específica da versão. Referências de fragmentos internos (começar com '#') referem-se a recursos contidos." /> <comment value="O uso de URLs absolutos fornece uma abordagem escalável estável adequada para um contexto de nuvem/web, enquanto o uso de referências relativas/lógicas fornece uma abordagem flexível adequada para uso ao negociar em limites de ecossistemas fechados. URLs absolutos não precisam apontar para um servidor FHIR RESTful, embora essa seja a abordagem preferida. Se a URL estiver em conformidade com a estrutura "/[type]/[id]", deve-se presumir que a referência é a um servidor FHIR RESTful." /> <min value="0" /> <max value="1" /> <base> <path value="Reference.reference" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <condition value="ref-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="ServiceRequest.subject.type"> <path value="ServiceRequest.subject.type" /> <short value="Digite a referência a que se refere (por exemplo, "Paciente")" /> <definition value="O tipo esperado do destino da referência. Se ambos Reference.type e Reference.reference forem preenchidos e Reference.reference for um URL FHIR, ambos DEVEM ser consistentes. O tipo é a URL Canônica da Definição de Recurso que é o tipo ao qual esta referência se refere. Referências são URLs relativos a http://hl7.org/fhir/StructureDefinition/ por exemplo "Paciente" é uma referência a http://hl7.org/fhir/StructureDefinition/Patient. URLs absolutos são permitidos apenas para modelos lógicos (e só podem ser usados em referências em modelos lógicos, não em recursos)." /> <comment value="Este elemento é usado para indicar o tipo de destino da referência. Isso pode ser usado qualquer um dos outros elementos preenchidos (ou não). Em alguns casos, o tipo de destino pode ser determinado pela inspeção da referência (por exemplo, uma URL RESTful) ou pela resolução do destino da referência; se o tipo e a referência forem fornecidos, a referência DEVERÁ resolver para um recurso do mesmo tipo que o especificado." /> <min value="0" /> <max value="1" /> <base> <path value="Reference.type" /> <min value="0" /> <max value="1" /> </base> <type> <code value="uri" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="FHIRResourceTypeExt" /> </extension> <strength value="extensible" /> <description value="Aa resource (or, for logical models, the URI of the logical model)." /> <valueSet value="http://hl7.org/fhir/ValueSet/resource-types" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="ServiceRequest.subject.identifier"> <path value="ServiceRequest.subject.identifier" /> <short value="Referência lógica, quando a referência literal não é conhecida" /> <definition value="Um identificador para o recurso de destino. Isso é usado quando não há como referenciar o outro recurso diretamente, porque a entidade que ele representa não está disponível por meio de um servidor FHIR ou porque não há como o autor do recurso converter um identificador conhecido em um local real . Não há exigência de que um identificador de Referência aponte para algo que está realmente exposto como uma instância FHIR, mas DEVE apontar para um conceito de negócios que seria esperado ser exposto como uma instância FHIR, e essa instância precisaria ser de um Tipo de recurso FHIR permitido pela referência." /> <comment value="Quando um identificador é fornecido no lugar de uma referência, qualquer sistema que processa a referência só poderá resolver o identificador para uma referência se entender o contexto de negócios no qual o identificador é usado. Às vezes, isso é global (por exemplo, um identificador nacional), mas geralmente não é. Por esse motivo, nenhum dos mecanismos úteis descritos para trabalhar com referências (por exemplo, encadeamento, inclusões) é possível, nem se deve esperar que os servidores sejam capazes de resolver a referência. Os servidores podem aceitar uma referência baseada em identificador intacta, resolvê-la e/ou rejeitá-la - consulte CapabilityStatement.rest.resource.referencePolicy. Quando um identificador e uma referência literal são fornecidos, a referência literal é preferida. Os aplicativos que processam o recurso são permitidos - mas não obrigatórios - para verificar se o identificador corresponde à referência literal Os aplicativos que convertem uma referência lógica em uma referência literal podem optar por deixar a referência lógica presente ou removê-la. A referência destina-se a apontar para uma estrutura que pode potencialmente ser expressa como um recurso FHIR, embora não haja necessidade de existir como uma instância de recurso FHIR real - exceto na medida em que um aplicativo deseja encontrar o destino da referência . O conteúdo referido como o identificador deve atender às restrições lógicas implícitas por quaisquer limitações sobre quais tipos de recursos são permitidos para a referência. Por exemplo, não seria legítimo enviar o identificador de uma receita de medicamento se o tipo fosse Referência(Observação|Relatório de Diagnóstico). Um dos casos de uso para Reference.identifier é a situação em que não existe nenhuma representação FHIR (em que o tipo é Reference (Any)" /> <min value="0" /> <max value="1" /> <base> <path value="Reference.identifier" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Identifier" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CX / EI (occasionally, more often EI maps to a resource id or a URL)" /> </mapping> <mapping> <identity value="rim" /> <map value="II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT]" /> </mapping> <mapping> <identity value="servd" /> <map value="Identifier" /> </mapping> <mapping> <identity value="rim" /> <map value=".identifier" /> </mapping> </element> <element id="ServiceRequest.subject.identifier.id"> <path value="ServiceRequest.subject.identifier.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="ServiceRequest.subject.identifier.extension"> <path value="ServiceRequest.subject.identifier.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="ServiceRequest.subject.identifier.use"> <path value="ServiceRequest.subject.identifier.use" /> <short value="usual | official | temp | secondary | old (If known)" /> <definition value="The purpose of this identifier." /> <comment value="Applications can assume that an identifier is permanent unless it explicitly says that it is temporary." /> <requirements value="Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers." /> <min value="0" /> <max value="0" /> <base> <path value="Identifier.use" /> <min value="0" /> <max value="1" /> </base> <type> <code value="code" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isModifier value="true" /> <isModifierReason value="This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one." /> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="IdentifierUse" /> </extension> <strength value="required" /> <description value="Identifies the purpose for this identifier, if known ." /> <valueSet value="http://hl7.org/fhir/ValueSet/identifier-use|4.0.1" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="N/A" /> </mapping> <mapping> <identity value="rim" /> <map value="Role.code or implied by context" /> </mapping> </element> <element id="ServiceRequest.subject.identifier.type"> <path value="ServiceRequest.subject.identifier.type" /> <short value="Description of identifier" /> <definition value="A coded type for the identifier that can be used to determine which identifier to use for a specific purpose." /> <comment value="This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type." /> <requirements value="Allows users to make use of identifiers when the identifier system is not known." /> <min value="0" /> <max value="0" /> <base> <path value="Identifier.type" /> <min value="0" /> <max value="1" /> </base> <type> <code value="CodeableConcept" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="IdentifierType" /> </extension> <strength value="extensible" /> <description value="A coded type for an identifier that can be used to determine which identifier to use for a specific purpose." /> <valueSet value="http://hl7.org/fhir/ValueSet/identifier-type" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CE/CNE/CWE" /> </mapping> <mapping> <identity value="rim" /> <map value="CD" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:CodeableConcept rdfs:subClassOf dt:CD" /> </mapping> <mapping> <identity value="v2" /> <map value="CX.5" /> </mapping> <mapping> <identity value="rim" /> <map value="Role.code or implied by context" /> </mapping> </element> <element id="ServiceRequest.subject.identifier.system"> <path value="ServiceRequest.subject.identifier.system" /> <short value="Identidade do sistema de terminologia" /> <definition value="Estabelece o namespace para o valor - ou seja, uma URL que descreve um conjunto de valores exclusivos. Na Dasa NameSystem são usados para diferenciar os diferentes sistemas de origem. O namesystem é usado para criar identificadores únicos para sistemas e organizações dentro de uma rede de interoperabilidade. Esses identificadores são necessários para que diferentes sistemas possam se comunicar e compartilhar informações de forma segura e confiável. O namesystem do FHIR é baseado em padrões internacionais e permite a criação de identificadores únicos que são independentes do sistema de origem. Isso ajuda a garantir que os dados sejam consistentes e precisos em toda a rede de interoperabilidade. O namesystem também suporta a validação de identificadores e fornece um mecanismo para registrar novos sistemas e organizações na rede." /> <comment value="Identifier.system sempre diferencia maiúsculas de minúsculas." /> <requirements value="Existem muitos conjuntos de identificadores. Para realizar a correspondência de dois identificadores, precisamos saber com qual conjunto estamos lidando. O sistema identifica um determinado conjunto de identificadores exclusivos." /> <min value="0" /> <max value="1" /> <base> <path value="Identifier.system" /> <min value="0" /> <max value="1" /> </base> <type> <code value="uri" /> </type> <example> <label value="General" /> <valueUri value="http://www.acme.com/identifiers/patient" /> </example> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CX.4 / EI-2-4" /> </mapping> <mapping> <identity value="rim" /> <map value="II.root or Role.id.root" /> </mapping> <mapping> <identity value="servd" /> <map value="./IdentifierType" /> </mapping> </element> <element id="ServiceRequest.subject.identifier.value"> <path value="ServiceRequest.subject.identifier.value" /> <short value="O valor que é único" /> <definition value="A porção do identificador normalmente relevante para o usuário e que é única dentro do contexto do sistema." /> <comment value="Se o valor for um URI completo, o sistema DEVERÁ ser urn:ietf:rfc:3986. O objetivo principal do valor é o mapeamento computacional. Como resultado, pode ser normalizado para fins de comparação (por exemplo, remoção de espaços em branco não significativos, traços, etc.) Um valor formatado para exibição humana pode ser transmitido usando a [extensão de valor renderizado](extension-rendered-value.html). Identifier.value deve ser tratado com distinção entre maiúsculas e minúsculas, a menos que o conhecimento do Identifier.system permita que o processador tenha certeza de que o processamento sem distinção entre maiúsculas e minúsculas é seguro." /> <min value="0" /> <max value="1" /> <base> <path value="Identifier.value" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <example> <label value="General" /> <valueString value="123456" /> </example> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CX.1 / EI.1" /> </mapping> <mapping> <identity value="rim" /> <map value="II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root)" /> </mapping> <mapping> <identity value="servd" /> <map value="./Value" /> </mapping> </element> <element id="ServiceRequest.subject.identifier.period"> <path value="ServiceRequest.subject.identifier.period" /> <short value="Time period when id is/was valid for use" /> <definition value="Time period during which identifier is/was valid for use." /> <comment value="A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See [Duration](datatypes.html#Duration)." /> <min value="0" /> <max value="0" /> <base> <path value="Identifier.period" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Period" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="per-1" /> <severity value="error" /> <human value="If present, start SHALL have a lower value than end" /> <expression value="start.hasValue().not() or end.hasValue().not() or (start <= end)" /> <xpath value="not(exists(f:start/@value)) or not(exists(f:end/@value)) or (xs:dateTime(f:start/@value) <= xs:dateTime(f:end/@value))" /> <source value="http://hl7.org/fhir/StructureDefinition/Period" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="DR" /> </mapping> <mapping> <identity value="rim" /> <map value="IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"]" /> </mapping> <mapping> <identity value="v2" /> <map value="CX.7 + CX.8" /> </mapping> <mapping> <identity value="rim" /> <map value="Role.effectiveTime or implied by context" /> </mapping> <mapping> <identity value="servd" /> <map value="./StartDate and ./EndDate" /> </mapping> </element> <element id="ServiceRequest.subject.identifier.assigner"> <path value="ServiceRequest.subject.identifier.assigner" /> <short value="Organization that issued id (may be just text)" /> <definition value="Organization that issued/manages the identifier." /> <comment value="The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization." /> <min value="0" /> <max value="0" /> <base> <path value="Identifier.assigner" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Reference" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Organization" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ref-1" /> <severity value="error" /> <human value="SHALL have a contained resource if a local reference is provided" /> <expression value="reference.exists() implies (reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')) or (reference='#' and %rootResource!=%resource))" /> <xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Reference" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" /> </mapping> <mapping> <identity value="v2" /> <map value="CX.4 / (CX.4,CX.9,CX.10)" /> </mapping> <mapping> <identity value="rim" /> <map value="II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper" /> </mapping> <mapping> <identity value="servd" /> <map value="./IdentifierIssuingAuthority" /> </mapping> </element> <element id="ServiceRequest.subject.display"> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable"> <valueBoolean value="true" /> </extension> <path value="ServiceRequest.subject.display" /> <short value="Texto alternativo para o recurso" /> <definition value="Narrativa de texto simples que identifica o recurso além da referência do recurso." /> <comment value="Isso geralmente não é o mesmo que o Resource.text do recurso referenciado. O objetivo é identificar o que está sendo referenciado, não descrevê-lo completamente." /> <min value="0" /> <max value="1" /> <base> <path value="Reference.display" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="ServiceRequest.encounter"> <path value="ServiceRequest.encounter" /> <short value="Encontro em que a solicitação foi criada" /> <definition value="Um encontro que fornece informações adicionais sobre o contexto de saúde em que essa solicitação é feita." /> <comment value="As referências DEVEM ser uma referência a um recurso FHIR real e DEVEM ser resolvíveis (permitindo controle de acesso, indisponibilidade temporária, etc.). A resolução pode ser por recuperação da URL ou, quando aplicável por tipo de recurso, tratando uma referência absoluta como uma URL canônica e procurando-a em um registro/repositório local." /> <alias value="context" /> <min value="0" /> <max value="1" /> <base> <path value="ServiceRequest.encounter" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Reference" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Encounter" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ref-1" /> <severity value="error" /> <human value="SHALL have a contained resource if a local reference is provided" /> <expression value="reference.exists() implies (reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')) or (reference='#' and %rootResource!=%resource))" /> <xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Reference" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" /> </mapping> <mapping> <identity value="workflow" /> <map value="Request.encounter" /> </mapping> <mapping> <identity value="w5" /> <map value="FiveWs.context" /> </mapping> <mapping> <identity value="v2" /> <map value="PV1" /> </mapping> <mapping> <identity value="rim" /> <map value=".inboundRelationship(typeCode=COMP].source[classCode<=PCPR, moodCode=EVN]" /> </mapping> <mapping> <identity value="quick" /> <map value="ClinicalStatement.encounter" /> </mapping> </element> <element id="ServiceRequest.encounter.id"> <path value="ServiceRequest.encounter.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="ServiceRequest.encounter.extension"> <path value="ServiceRequest.encounter.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="ServiceRequest.encounter.reference"> <path value="ServiceRequest.encounter.reference" /> <short value="Referência literal, URL relativa, interna ou absoluta" /> <definition value="Uma referência a um local no qual o outro recurso é encontrado. A referência pode ser uma referência relativa, caso em que é relativa à URL base do serviço, ou uma URL absoluta que resolve para o local onde o recurso é encontrado. A referência pode ser específica da versão ou não. Se a referência não for a um servidor FHIR RESTful, deve-se presumir que seja específica da versão. Referências de fragmentos internos (começar com '#') referem-se a recursos contidos." /> <comment value="O uso de URLs absolutos fornece uma abordagem escalável estável adequada para um contexto de nuvem/web, enquanto o uso de referências relativas/lógicas fornece uma abordagem flexível adequada para uso ao negociar em limites de ecossistemas fechados. URLs absolutos não precisam apontar para um servidor FHIR RESTful, embora essa seja a abordagem preferida. Se a URL estiver em conformidade com a estrutura "/[type]/[id]", deve-se presumir que a referência é a um servidor FHIR RESTful." /> <min value="0" /> <max value="1" /> <base> <path value="Reference.reference" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <condition value="ref-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="ServiceRequest.encounter.type"> <path value="ServiceRequest.encounter.type" /> <short value="Digite a referência a que se refere (por exemplo, "Pacient")" /> <definition value="O tipo esperado do destino da referência. Se ambos Reference.type e Reference.reference forem preenchidos e Reference.reference for um URL FHIR, ambos DEVEM ser consistentes. O tipo é a URL Canônica da Definição de Recurso que é o tipo ao qual esta referência se refere. Referências são URLs relativos a http://hl7.org/fhir/StructureDefinition/ por exemplo "Paciente" é uma referência a http://hl7.org/fhir/StructureDefinition/Patient. URLs absolutos são permitidos apenas para modelos lógicos (e só podem ser usados em referências em modelos lógicos, não em recursos)." /> <comment value="Este elemento é usado para indicar o tipo de destino da referência. Isso pode ser usado qualquer um dos outros elementos preenchidos (ou não). Em alguns casos, o tipo de destino pode ser determinado pela inspeção da referência (por exemplo, uma URL RESTful) ou pela resolução do destino da referência; se o tipo e a referência forem fornecidos, a referência DEVERÁ resolver para um recurso do mesmo tipo que o especificado." /> <min value="0" /> <max value="1" /> <base> <path value="Reference.type" /> <min value="0" /> <max value="1" /> </base> <type> <code value="uri" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="FHIRResourceTypeExt" /> </extension> <strength value="extensible" /> <description value="Aa resource (or, for logical models, the URI of the logical model)." /> <valueSet value="http://hl7.org/fhir/ValueSet/resource-types" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="ServiceRequest.encounter.identifier"> <path value="ServiceRequest.encounter.identifier" /> <short value="Referência lógica, quando a referência literal não é conhecida" /> <definition value="Um identificador para o recurso de destino. Isso é usado quando não há como referenciar o outro recurso diretamente, porque a entidade que ele representa não está disponível por meio de um servidor FHIR ou porque não há como o autor do recurso converter um identificador conhecido em um local real . Não há exigência de que um identificador de Referência aponte para algo que está realmente exposto como uma instância FHIR, mas DEVE apontar para um conceito de negócios que seria esperado ser exposto como uma instância FHIR, e essa instância precisaria ser de um Tipo de recurso FHIR permitido pela referência." /> <comment value="Quando um identificador é fornecido no lugar de uma referência, qualquer sistema que processa a referência só poderá resolver o identificador para uma referência se entender o contexto de negócios no qual o identificador é usado. Às vezes, isso é global (por exemplo, um identificador nacional), mas geralmente não é. Por esse motivo, nenhum dos mecanismos úteis descritos para trabalhar com referências (por exemplo, encadeamento, inclusões) é possível, nem se deve esperar que os servidores sejam capazes de resolver a referência. Os servidores podem aceitar uma referência baseada em identificador intacta, resolvê-la e/ou rejeitá-la - consulte CapabilityStatement.rest.resource.referencePolicy. Quando um identificador e uma referência literal são fornecidos, a referência literal é preferida. Os aplicativos que processam o recurso são permitidos - mas não obrigatórios - para verificar se o identificador corresponde à referência literal Os aplicativos que convertem uma referência lógica em uma referência literal podem optar por deixar a referência lógica presente ou removê-la. A referência destina-se a apontar para uma estrutura que pode potencialmente ser expressa como um recurso FHIR, embora não haja necessidade de existir como uma instância de recurso FHIR real - exceto na medida em que um aplicativo deseja encontrar o destino da referência . O conteúdo referido como o identificador deve atender às restrições lógicas implícitas por quaisquer limitações sobre quais tipos de recursos são permitidos para a referência. Por exemplo, não seria legítimo enviar o identificador de uma receita de medicamento se o tipo fosse Referência(Observação|Relatório de Diagnóstico). Um dos casos de uso para Reference.identifier é a situação em que não existe nenhuma representação FHIR (em que o tipo é Reference (Any)" /> <min value="0" /> <max value="1" /> <base> <path value="Reference.identifier" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Identifier" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CX / EI (occasionally, more often EI maps to a resource id or a URL)" /> </mapping> <mapping> <identity value="rim" /> <map value="II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT]" /> </mapping> <mapping> <identity value="servd" /> <map value="Identifier" /> </mapping> <mapping> <identity value="rim" /> <map value=".identifier" /> </mapping> </element> <element id="ServiceRequest.encounter.identifier.id"> <path value="ServiceRequest.encounter.identifier.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="ServiceRequest.encounter.identifier.extension"> <path value="ServiceRequest.encounter.identifier.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="ServiceRequest.encounter.identifier.use"> <path value="ServiceRequest.encounter.identifier.use" /> <short value="usual | official | temp | secondary | old (If known)" /> <definition value="The purpose of this identifier." /> <comment value="Applications can assume that an identifier is permanent unless it explicitly says that it is temporary." /> <requirements value="Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers." /> <min value="0" /> <max value="0" /> <base> <path value="Identifier.use" /> <min value="0" /> <max value="1" /> </base> <type> <code value="code" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isModifier value="true" /> <isModifierReason value="This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one." /> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="IdentifierUse" /> </extension> <strength value="required" /> <description value="Identifies the purpose for this identifier, if known ." /> <valueSet value="http://hl7.org/fhir/ValueSet/identifier-use|4.0.1" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="N/A" /> </mapping> <mapping> <identity value="rim" /> <map value="Role.code or implied by context" /> </mapping> </element> <element id="ServiceRequest.encounter.identifier.type"> <path value="ServiceRequest.encounter.identifier.type" /> <short value="Description of identifier" /> <definition value="A coded type for the identifier that can be used to determine which identifier to use for a specific purpose." /> <comment value="This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type." /> <requirements value="Allows users to make use of identifiers when the identifier system is not known." /> <min value="0" /> <max value="0" /> <base> <path value="Identifier.type" /> <min value="0" /> <max value="1" /> </base> <type> <code value="CodeableConcept" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="IdentifierType" /> </extension> <strength value="extensible" /> <description value="A coded type for an identifier that can be used to determine which identifier to use for a specific purpose." /> <valueSet value="http://hl7.org/fhir/ValueSet/identifier-type" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CE/CNE/CWE" /> </mapping> <mapping> <identity value="rim" /> <map value="CD" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:CodeableConcept rdfs:subClassOf dt:CD" /> </mapping> <mapping> <identity value="v2" /> <map value="CX.5" /> </mapping> <mapping> <identity value="rim" /> <map value="Role.code or implied by context" /> </mapping> </element> <element id="ServiceRequest.encounter.identifier.system"> <path value="ServiceRequest.encounter.identifier.system" /> <short value="Identidade do sistema de terminologia" /> <definition value="Estabelece o namespace para o valor - ou seja, uma URL que descreve um conjunto de valores exclusivos. Na Dasa NameSystem são usados para diferenciar os diferentes sistemas de origem. O namesystem é usado para criar identificadores únicos para sistemas e organizações dentro de uma rede de interoperabilidade. Esses identificadores são necessários para que diferentes sistemas possam se comunicar e compartilhar informações de forma segura e confiável. O namesystem do FHIR é baseado em padrões internacionais e permite a criação de identificadores únicos que são independentes do sistema de origem. Isso ajuda a garantir que os dados sejam consistentes e precisos em toda a rede de interoperabilidade. O namesystem também suporta a validação de identificadores e fornece um mecanismo para registrar novos sistemas e organizações na rede." /> <comment value="Identifier.system sempre diferencia maiúsculas de minúsculas." /> <requirements value="Existem muitos conjuntos de identificadores. Para realizar a correspondência de dois identificadores, precisamos saber com qual conjunto estamos lidando. O sistema identifica um determinado conjunto de identificadores exclusivos." /> <min value="0" /> <max value="1" /> <base> <path value="Identifier.system" /> <min value="0" /> <max value="1" /> </base> <type> <code value="uri" /> </type> <example> <label value="General" /> <valueUri value="http://www.acme.com/identifiers/patient" /> </example> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CX.4 / EI-2-4" /> </mapping> <mapping> <identity value="rim" /> <map value="II.root or Role.id.root" /> </mapping> <mapping> <identity value="servd" /> <map value="./IdentifierType" /> </mapping> </element> <element id="ServiceRequest.encounter.identifier.value"> <path value="ServiceRequest.encounter.identifier.value" /> <short value="O valor que é único" /> <definition value="A porção do identificador normalmente relevante para o usuário e que é única dentro do contexto do sistema." /> <comment value="Se o valor for um URI completo, o sistema DEVERÁ ser urn:ietf:rfc:3986. O objetivo principal do valor é o mapeamento computacional. Como resultado, pode ser normalizado para fins de comparação (por exemplo, remoção de espaços em branco não significativos, traços, etc.) Um valor formatado para exibição humana pode ser transmitido usando a [extensão de valor renderizado](extension-rendered-value.html). Identifier.value deve ser tratado com distinção entre maiúsculas e minúsculas, a menos que o conhecimento do Identifier.system permita que o processador tenha certeza de que o processamento sem distinção entre maiúsculas e minúsculas é seguro." /> <min value="0" /> <max value="1" /> <base> <path value="Identifier.value" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <example> <label value="General" /> <valueString value="123456" /> </example> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CX.1 / EI.1" /> </mapping> <mapping> <identity value="rim" /> <map value="II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root)" /> </mapping> <mapping> <identity value="servd" /> <map value="./Value" /> </mapping> </element> <element id="ServiceRequest.encounter.identifier.period"> <path value="ServiceRequest.encounter.identifier.period" /> <short value="Time period when id is/was valid for use" /> <definition value="Time period during which identifier is/was valid for use." /> <comment value="A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See [Duration](datatypes.html#Duration)." /> <min value="0" /> <max value="0" /> <base> <path value="Identifier.period" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Period" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="per-1" /> <severity value="error" /> <human value="If present, start SHALL have a lower value than end" /> <expression value="start.hasValue().not() or end.hasValue().not() or (start <= end)" /> <xpath value="not(exists(f:start/@value)) or not(exists(f:end/@value)) or (xs:dateTime(f:start/@value) <= xs:dateTime(f:end/@value))" /> <source value="http://hl7.org/fhir/StructureDefinition/Period" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="DR" /> </mapping> <mapping> <identity value="rim" /> <map value="IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"]" /> </mapping> <mapping> <identity value="v2" /> <map value="CX.7 + CX.8" /> </mapping> <mapping> <identity value="rim" /> <map value="Role.effectiveTime or implied by context" /> </mapping> <mapping> <identity value="servd" /> <map value="./StartDate and ./EndDate" /> </mapping> </element> <element id="ServiceRequest.encounter.identifier.assigner"> <path value="ServiceRequest.encounter.identifier.assigner" /> <short value="Organization that issued id (may be just text)" /> <definition value="Organization that issued/manages the identifier." /> <comment value="The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization." /> <min value="0" /> <max value="0" /> <base> <path value="Identifier.assigner" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Reference" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Organization" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ref-1" /> <severity value="error" /> <human value="SHALL have a contained resource if a local reference is provided" /> <expression value="reference.exists() implies (reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')) or (reference='#' and %rootResource!=%resource))" /> <xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Reference" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" /> </mapping> <mapping> <identity value="v2" /> <map value="CX.4 / (CX.4,CX.9,CX.10)" /> </mapping> <mapping> <identity value="rim" /> <map value="II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper" /> </mapping> <mapping> <identity value="servd" /> <map value="./IdentifierIssuingAuthority" /> </mapping> </element> <element id="ServiceRequest.encounter.display"> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable"> <valueBoolean value="true" /> </extension> <path value="ServiceRequest.encounter.display" /> <short value="Texto alternativo para o recurso" /> <definition value="Narrativa de texto simples que identifica o recurso além da referência do recurso." /> <comment value="Isso geralmente não é o mesmo que o Resource.text do recurso referenciado. O objetivo é identificar o que está sendo referenciado, não descrevê-lo completamente." /> <min value="0" /> <max value="1" /> <base> <path value="Reference.display" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="ServiceRequest.occurrence[x]"> <path value="ServiceRequest.occurrence[x]" /> <short value="When service should occur" /> <definition value="The date/time at which the requested service should occur." /> <alias value="schedule" /> <min value="0" /> <max value="0" /> <base> <path value="ServiceRequest.occurrence[x]" /> <min value="0" /> <max value="1" /> </base> <type> <code value="dateTime" /> </type> <type> <code value="Period" /> </type> <type> <code value="Timing" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="workflow" /> <map value="Request.occurrence[x]" /> </mapping> <mapping> <identity value="w5" /> <map value="FiveWs.planned" /> </mapping> <mapping> <identity value="v2" /> <map value="TQ1/TQ2, OBR-7/OBR-8" /> </mapping> <mapping> <identity value="rim" /> <map value=".effectiveTime" /> </mapping> <mapping> <identity value="quick" /> <map value="Procedure.procedureSchedule" /> </mapping> </element> <element id="ServiceRequest.asNeeded[x]"> <path value="ServiceRequest.asNeeded[x]" /> <short value="Preconditions for service" /> <definition value="If a CodeableConcept is present, it indicates the pre-condition for performing the service. For example "pain", "on flare-up", etc." /> <min value="0" /> <max value="0" /> <base> <path value="ServiceRequest.asNeeded[x]" /> <min value="0" /> <max value="1" /> </base> <type> <code value="boolean" /> </type> <type> <code value="CodeableConcept" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="ProcedureAsNeededReason" /> </extension> <strength value="example" /> <description value="A coded concept identifying the pre-condition that should hold prior to performing a procedure. For example "pain", "on flare-up", etc." /> <valueSet value="http://hl7.org/fhir/ValueSet/medication-as-needed-reason" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="boolean: precondition.negationInd (inversed - so negationInd = true means asNeeded=false CodeableConcept: precondition.observationEventCriterion[code="Assertion"].value" /> </mapping> <mapping> <identity value="quick" /> <map value="Proposal.prnReason.reason" /> </mapping> </element> <element id="ServiceRequest.authoredOn"> <path value="ServiceRequest.authoredOn" /> <short value="Date request signed" /> <definition value="When the request transitioned to being actionable." /> <alias value="orderedOn" /> <min value="0" /> <max value="0" /> <base> <path value="ServiceRequest.authoredOn" /> <min value="0" /> <max value="1" /> </base> <type> <code value="dateTime" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="workflow" /> <map value="Request.authoredOn" /> </mapping> <mapping> <identity value="w5" /> <map value="FiveWs.recorded" /> </mapping> <mapping> <identity value="v2" /> <map value="ORC.9, RF1-7 / RF1-9" /> </mapping> <mapping> <identity value="rim" /> <map value=".participation[typeCode=AUT].time" /> </mapping> <mapping> <identity value="quick" /> <map value="Proposal.proposedAtTime" /> </mapping> </element> <element id="ServiceRequest.requester"> <path value="ServiceRequest.requester" /> <short value="Quem/o que está solicitando o serviço" /> <definition value="O indivíduo que iniciou a solicitação e tem responsabilidade por sua ativação." /> <comment value="Este não é o despachante, mas quem é o autorizador. Este elemento não se destina a lidar com a delegação que geralmente seria gerenciada por meio do recurso Provenance." /> <alias value="author" /> <alias value="orderer" /> <min value="0" /> <max value="1" /> <base> <path value="ServiceRequest.requester" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Reference" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Practitioner" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/PractitionerRole" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Organization" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Patient" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/RelatedPerson" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Device" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ref-1" /> <severity value="error" /> <human value="SHALL have a contained resource if a local reference is provided" /> <expression value="reference.exists() implies (reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')) or (reference='#' and %rootResource!=%resource))" /> <xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Reference" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" /> </mapping> <mapping> <identity value="workflow" /> <map value="Request.requester" /> </mapping> <mapping> <identity value="w5" /> <map value="FiveWs.author" /> </mapping> <mapping> <identity value="v2" /> <map value="ORC.12, PRT" /> </mapping> <mapping> <identity value="rim" /> <map value=".participation[typeCode=AUT].role" /> </mapping> <mapping> <identity value="quick" /> <map value="ClinicalStatement.statementAuthor" /> </mapping> </element> <element id="ServiceRequest.requester.id"> <path value="ServiceRequest.requester.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="ServiceRequest.requester.extension"> <path value="ServiceRequest.requester.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="ServiceRequest.requester.reference"> <path value="ServiceRequest.requester.reference" /> <short value="Referência literal, URL relativa, interna ou absoluta" /> <definition value="Uma referência a um local no qual o outro recurso é encontrado. A referência pode ser uma referência relativa, caso em que é relativa à URL base do serviço, ou uma URL absoluta que resolve para o local onde o recurso é encontrado. A referência pode ser específica da versão ou não. Se a referência não for a um servidor FHIR RESTful, deve-se presumir que seja específica da versão. Referências de fragmentos internos (começar com '#') referem-se a recursos contidos" /> <comment value="O uso de URLs absolutos fornece uma abordagem escalável estável adequada para um contexto de nuvem/web, enquanto o uso de referências relativas/lógicas fornece uma abordagem flexível adequada para uso ao negociar em limites de ecossistemas fechados. URLs absolutos não precisam apontar para um servidor FHIR RESTful, embora essa seja a abordagem preferida. Se a URL estiver em conformidade com a estrutura "/[type]/[id]", deve-se presumir que a referência é a um servidor FHIR RESTful." /> <min value="0" /> <max value="1" /> <base> <path value="Reference.reference" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <condition value="ref-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="ServiceRequest.requester.type"> <path value="ServiceRequest.requester.type" /> <short value="Digite a referência a que se refere (por exemplo, "Pacient")" /> <definition value="O tipo esperado do destino da referência. Se ambos Reference.type e Reference.reference forem preenchidos e Reference.reference for um URL FHIR, ambos DEVEM ser consistentes. O tipo é a URL Canônica da Definição de Recurso que é o tipo ao qual esta referência se refere. Referências são URLs relativos a http://hl7.org/fhir/StructureDefinition/ por exemplo "Paciente" é uma referência a http://hl7.org/fhir/StructureDefinition/Patient. URLs absolutos são permitidos apenas para modelos lógicos (e só podem ser usados em referências em modelos lógicos, não em recursos)." /> <comment value="Este elemento é usado para indicar o tipo de destino da referência. Isso pode ser usado qualquer um dos outros elementos preenchidos (ou não). Em alguns casos, o tipo de destino pode ser determinado pela inspeção da referência (por exemplo, uma URL RESTful) ou pela resolução do destino da referência; se o tipo e a referência forem fornecidos, a referência DEVERÁ resolver para um recurso do mesmo tipo que o especificado." /> <min value="0" /> <max value="1" /> <base> <path value="Reference.type" /> <min value="0" /> <max value="1" /> </base> <type> <code value="uri" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="FHIRResourceTypeExt" /> </extension> <strength value="extensible" /> <description value="Aa resource (or, for logical models, the URI of the logical model)." /> <valueSet value="http://hl7.org/fhir/ValueSet/resource-types" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="ServiceRequest.requester.identifier"> <path value="ServiceRequest.requester.identifier" /> <short value="Referência lógica, quando a referência literal não é conhecida" /> <definition value="Um identificador para o recurso de destino. Isso é usado quando não há como referenciar o outro recurso diretamente, porque a entidade que ele representa não está disponível por meio de um servidor FHIR ou porque não há como o autor do recurso converter um identificador conhecido em um local real . Não há exigência de que um identificador de Referência aponte para algo que está realmente exposto como uma instância FHIR, mas DEVE apontar para um conceito de negócios que seria esperado ser exposto como uma instância FHIR, e essa instância precisaria ser de um Tipo de recurso FHIR permitido pela referência." /> <comment value="Quando um identificador é fornecido no lugar de uma referência, qualquer sistema que processa a referência só poderá resolver o identificador para uma referência se entender o contexto de negócios no qual o identificador é usado. Às vezes, isso é global (por exemplo, um identificador nacional), mas geralmente não é. Por esse motivo, nenhum dos mecanismos úteis descritos para trabalhar com referências (por exemplo, encadeamento, inclusões) é possível, nem se deve esperar que os servidores sejam capazes de resolver a referência. Os servidores podem aceitar uma referência baseada em identificador intacta, resolvê-la e/ou rejeitá-la - consulte CapabilityStatement.rest.resource.referencePolicy. Quando um identificador e uma referência literal são fornecidos, a referência literal é preferida. Os aplicativos que processam o recurso são permitidos - mas não obrigatórios - para verificar se o identificador corresponde à referência literal Os aplicativos que convertem uma referência lógica em uma referência literal podem optar por deixar a referência lógica presente ou removê-la. A referência destina-se a apontar para uma estrutura que pode potencialmente ser expressa como um recurso FHIR, embora não haja necessidade de existir como uma instância de recurso FHIR real - exceto na medida em que um aplicativo deseja encontrar o destino da referência . O conteúdo referido como o identificador deve atender às restrições lógicas implícitas por quaisquer limitações sobre quais tipos de recursos são permitidos para a referência. Por exemplo, não seria legítimo enviar o identificador de uma receita de medicamento se o tipo fosse Referência(Observação|Relatório de Diagnóstico). Um dos casos de uso para Reference.identifier é a situação em que não existe nenhuma representação FHIR (em que o tipo é Reference (Any)" /> <min value="0" /> <max value="1" /> <base> <path value="Reference.identifier" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Identifier" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CX / EI (occasionally, more often EI maps to a resource id or a URL)" /> </mapping> <mapping> <identity value="rim" /> <map value="II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT]" /> </mapping> <mapping> <identity value="servd" /> <map value="Identifier" /> </mapping> <mapping> <identity value="rim" /> <map value=".identifier" /> </mapping> </element> <element id="ServiceRequest.requester.identifier.id"> <path value="ServiceRequest.requester.identifier.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="ServiceRequest.requester.identifier.extension"> <path value="ServiceRequest.requester.identifier.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="ServiceRequest.requester.identifier.use"> <path value="ServiceRequest.requester.identifier.use" /> <short value="usual | official | temp | secondary | old (If known)" /> <definition value="The purpose of this identifier." /> <comment value="Applications can assume that an identifier is permanent unless it explicitly says that it is temporary." /> <requirements value="Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers." /> <min value="0" /> <max value="0" /> <base> <path value="Identifier.use" /> <min value="0" /> <max value="1" /> </base> <type> <code value="code" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isModifier value="true" /> <isModifierReason value="This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one." /> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="IdentifierUse" /> </extension> <strength value="required" /> <description value="Identifies the purpose for this identifier, if known ." /> <valueSet value="http://hl7.org/fhir/ValueSet/identifier-use|4.0.1" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="N/A" /> </mapping> <mapping> <identity value="rim" /> <map value="Role.code or implied by context" /> </mapping> </element> <element id="ServiceRequest.requester.identifier.type"> <path value="ServiceRequest.requester.identifier.type" /> <short value="Description of identifier" /> <definition value="A coded type for the identifier that can be used to determine which identifier to use for a specific purpose." /> <comment value="This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type." /> <requirements value="Allows users to make use of identifiers when the identifier system is not known." /> <min value="0" /> <max value="0" /> <base> <path value="Identifier.type" /> <min value="0" /> <max value="1" /> </base> <type> <code value="CodeableConcept" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="IdentifierType" /> </extension> <strength value="extensible" /> <description value="A coded type for an identifier that can be used to determine which identifier to use for a specific purpose." /> <valueSet value="http://hl7.org/fhir/ValueSet/identifier-type" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CE/CNE/CWE" /> </mapping> <mapping> <identity value="rim" /> <map value="CD" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:CodeableConcept rdfs:subClassOf dt:CD" /> </mapping> <mapping> <identity value="v2" /> <map value="CX.5" /> </mapping> <mapping> <identity value="rim" /> <map value="Role.code or implied by context" /> </mapping> </element> <element id="ServiceRequest.requester.identifier.system"> <path value="ServiceRequest.requester.identifier.system" /> <short value="Identidade do sistema de terminologia" /> <definition value="Estabelece o namespace para o valor - ou seja, uma URL que descreve um conjunto de valores exclusivos. Na Dasa NameSystem são usados para diferenciar os diferentes sistemas de origem. O namesystem é usado para criar identificadores únicos para sistemas e organizações dentro de uma rede de interoperabilidade. Esses identificadores são necessários para que diferentes sistemas possam se comunicar e compartilhar informações de forma segura e confiável. O namesystem do FHIR é baseado em padrões internacionais e permite a criação de identificadores únicos que são independentes do sistema de origem. Isso ajuda a garantir que os dados sejam consistentes e precisos em toda a rede de interoperabilidade. O namesystem também suporta a validação de identificadores e fornece um mecanismo para registrar novos sistemas e organizações na rede." /> <comment value="Identifier.system sempre diferencia maiúsculas de minúsculas." /> <requirements value="Existem muitos conjuntos de identificadores. Para realizar a correspondência de dois identificadores, precisamos saber com qual conjunto estamos lidando. O sistema identifica um determinado conjunto de identificadores exclusivos." /> <min value="0" /> <max value="1" /> <base> <path value="Identifier.system" /> <min value="0" /> <max value="1" /> </base> <type> <code value="uri" /> </type> <example> <label value="General" /> <valueUri value="http://www.acme.com/identifiers/patient" /> </example> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CX.4 / EI-2-4" /> </mapping> <mapping> <identity value="rim" /> <map value="II.root or Role.id.root" /> </mapping> <mapping> <identity value="servd" /> <map value="./IdentifierType" /> </mapping> </element> <element id="ServiceRequest.requester.identifier.value"> <path value="ServiceRequest.requester.identifier.value" /> <short value="O valor que é único" /> <definition value="A porção do identificador normalmente relevante para o usuário e que é única dentro do contexto do sistema." /> <comment value="Se o valor for um URI completo, o sistema DEVERÁ ser urn:ietf:rfc:3986. O objetivo principal do valor é o mapeamento computacional. Como resultado, pode ser normalizado para fins de comparação (por exemplo, remoção de espaços em branco não significativos, traços, etc.) Um valor formatado para exibição humana pode ser transmitido usando a [extensão de valor renderizado](extension-rendered-value.html). Identifier.value deve ser tratado com distinção entre maiúsculas e minúsculas, a menos que o conhecimento do Identifier.system permita que o processador tenha certeza de que o processamento sem distinção entre maiúsculas e minúsculas é seguro." /> <min value="0" /> <max value="1" /> <base> <path value="Identifier.value" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <example> <label value="General" /> <valueString value="123456" /> </example> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CX.1 / EI.1" /> </mapping> <mapping> <identity value="rim" /> <map value="II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root)" /> </mapping> <mapping> <identity value="servd" /> <map value="./Value" /> </mapping> </element> <element id="ServiceRequest.requester.identifier.period"> <path value="ServiceRequest.requester.identifier.period" /> <short value="Time period when id is/was valid for use" /> <definition value="Time period during which identifier is/was valid for use." /> <comment value="A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See [Duration](datatypes.html#Duration)." /> <min value="0" /> <max value="0" /> <base> <path value="Identifier.period" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Period" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="per-1" /> <severity value="error" /> <human value="If present, start SHALL have a lower value than end" /> <expression value="start.hasValue().not() or end.hasValue().not() or (start <= end)" /> <xpath value="not(exists(f:start/@value)) or not(exists(f:end/@value)) or (xs:dateTime(f:start/@value) <= xs:dateTime(f:end/@value))" /> <source value="http://hl7.org/fhir/StructureDefinition/Period" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="DR" /> </mapping> <mapping> <identity value="rim" /> <map value="IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"]" /> </mapping> <mapping> <identity value="v2" /> <map value="CX.7 + CX.8" /> </mapping> <mapping> <identity value="rim" /> <map value="Role.effectiveTime or implied by context" /> </mapping> <mapping> <identity value="servd" /> <map value="./StartDate and ./EndDate" /> </mapping> </element> <element id="ServiceRequest.requester.identifier.assigner"> <path value="ServiceRequest.requester.identifier.assigner" /> <short value="Organization that issued id (may be just text)" /> <definition value="Organization that issued/manages the identifier." /> <comment value="The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization." /> <min value="0" /> <max value="0" /> <base> <path value="Identifier.assigner" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Reference" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Organization" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ref-1" /> <severity value="error" /> <human value="SHALL have a contained resource if a local reference is provided" /> <expression value="reference.exists() implies (reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')) or (reference='#' and %rootResource!=%resource))" /> <xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Reference" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" /> </mapping> <mapping> <identity value="v2" /> <map value="CX.4 / (CX.4,CX.9,CX.10)" /> </mapping> <mapping> <identity value="rim" /> <map value="II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper" /> </mapping> <mapping> <identity value="servd" /> <map value="./IdentifierIssuingAuthority" /> </mapping> </element> <element id="ServiceRequest.requester.display"> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable"> <valueBoolean value="true" /> </extension> <path value="ServiceRequest.requester.display" /> <short value="Texto alternativo para o recurso" /> <definition value="Narrativa de texto simples que identifica o recurso além da referência do recurso." /> <comment value="Isso geralmente não é o mesmo que o Resource.text do recurso referenciado. O objetivo é identificar o que está sendo referenciado, não descrevê-lo completamente." /> <min value="0" /> <max value="1" /> <base> <path value="Reference.display" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="ServiceRequest.performerType"> <path value="ServiceRequest.performerType" /> <short value="Performer role" /> <definition value="Desired type of performer for doing the requested service." /> <comment value="This is a role, not a participation type. In other words, does not describe the task but describes the capacity. For example, “compounding pharmacy”, “psychiatrist” or “internal referral”." /> <alias value="specialty" /> <min value="0" /> <max value="0" /> <base> <path value="ServiceRequest.performerType" /> <min value="0" /> <max value="1" /> </base> <type> <code value="CodeableConcept" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="ServiceRequestParticipantRole" /> </extension> <strength value="example" /> <description value="Indicates specific responsibility of an individual within the care team, such as "Primary physician", "Team coordinator", "Caregiver", etc." /> <valueSet value="http://hl7.org/fhir/ValueSet/participant-role" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CE/CNE/CWE" /> </mapping> <mapping> <identity value="rim" /> <map value="CD" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:CodeableConcept rdfs:subClassOf dt:CD" /> </mapping> <mapping> <identity value="workflow" /> <map value="Request.performerType" /> </mapping> <mapping> <identity value="w5" /> <map value="FiveWs.actor" /> </mapping> <mapping> <identity value="v2" /> <map value="PRT, RF!-3" /> </mapping> <mapping> <identity value="rim" /> <map value=".participation[typeCode=PRF].role[scoper.determinerCode=KIND].code" /> </mapping> </element> <element id="ServiceRequest.performer"> <path value="ServiceRequest.performer" /> <short value="Requested performer" /> <definition value="The desired performer for doing the requested service. For example, the surgeon, dermatopathologist, endoscopist, etc." /> <comment value="If multiple performers are present, it is interpreted as a list of *alternative* performers without any preference regardless of order. If order of preference is needed use the [request-performerOrder extension](extension-request-performerorder.html). Use CareTeam to represent a group of performers (for example, Practitioner A *and* Practitioner B)." /> <alias value="request recipient" /> <min value="0" /> <max value="0" /> <base> <path value="ServiceRequest.performer" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Reference" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Practitioner" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/PractitionerRole" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Organization" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/CareTeam" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/HealthcareService" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Patient" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Device" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/RelatedPerson" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ref-1" /> <severity value="error" /> <human value="SHALL have a contained resource if a local reference is provided" /> <expression value="reference.exists() implies (reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')) or (reference='#' and %rootResource!=%resource))" /> <xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Reference" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" /> </mapping> <mapping> <identity value="workflow" /> <map value="Request.performer" /> </mapping> <mapping> <identity value="w5" /> <map value="FiveWs.actor" /> </mapping> <mapping> <identity value="v2" /> <map value="PRT, Practitioner: PRD-2/PRD-7 where PRD-3 = RT; Organization: PRD-10 where PRD-3 = RT" /> </mapping> <mapping> <identity value="rim" /> <map value=".participation[typeCode=PRF].role[scoper.determinerCode=INSTANCE]" /> </mapping> </element> <element id="ServiceRequest.locationCode"> <path value="ServiceRequest.locationCode" /> <short value="Requested location" /> <definition value="The preferred location(s) where the procedure should actually happen in coded or free text form. E.g. at home or nursing day care center." /> <comment value="Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination." /> <min value="0" /> <max value="0" /> <base> <path value="ServiceRequest.locationCode" /> <min value="0" /> <max value="*" /> </base> <type> <code value="CodeableConcept" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="ServiceRequestLocation" /> </extension> <strength value="example" /> <description value="A location type where services are delivered." /> <valueSet value="http://terminology.hl7.org/ValueSet/v3-ServiceDeliveryLocationRoleType" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CE/CNE/CWE" /> </mapping> <mapping> <identity value="rim" /> <map value="CD" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:CodeableConcept rdfs:subClassOf dt:CD" /> </mapping> <mapping> <identity value="w5" /> <map value="FiveWs.actor" /> </mapping> <mapping> <identity value="rim" /> <map value=".participation[typeCode=LOC].role[scoper.determinerCode=KIND].code" /> </mapping> </element> <element id="ServiceRequest.locationReference"> <path value="ServiceRequest.locationReference" /> <short value="Requested location" /> <definition value="A reference to the the preferred location(s) where the procedure should actually happen. E.g. at home or nursing day care center." /> <comment value="References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository." /> <min value="0" /> <max value="0" /> <base> <path value="ServiceRequest.locationReference" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Reference" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Location" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ref-1" /> <severity value="error" /> <human value="SHALL have a contained resource if a local reference is provided" /> <expression value="reference.exists() implies (reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')) or (reference='#' and %rootResource!=%resource))" /> <xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Reference" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" /> </mapping> <mapping> <identity value="w5" /> <map value="FiveWs.actor" /> </mapping> <mapping> <identity value="rim" /> <map value=".participation[typeCode=LOC].role[scoper.determinerCode=INSTANCE]" /> </mapping> </element> <element id="ServiceRequest.reasonCode"> <path value="ServiceRequest.reasonCode" /> <short value="Explanation/Justification for procedure or service" /> <definition value="An explanation or justification for why this service is being requested in coded or textual form. This is often for billing purposes. May relate to the resources referred to in `supportingInfo`." /> <comment value="This element represents why the referral is being made and may be used to decide how the service will be performed, or even if it will be performed at all. Use `CodeableConcept.text` element if the data is free (uncoded) text as shown in the [CT Scan example](servicerequest-example-di.html)." /> <min value="0" /> <max value="0" /> <base> <path value="ServiceRequest.reasonCode" /> <min value="0" /> <max value="*" /> </base> <type> <code value="CodeableConcept" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="ServiceRequestReason" /> </extension> <strength value="example" /> <description value="Diagnosis or problem codes justifying the reason for requesting the service investigation." /> <valueSet value="http://hl7.org/fhir/ValueSet/procedure-reason" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CE/CNE/CWE" /> </mapping> <mapping> <identity value="rim" /> <map value="CD" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:CodeableConcept rdfs:subClassOf dt:CD" /> </mapping> <mapping> <identity value="workflow" /> <map value="Request.reasonCode" /> </mapping> <mapping> <identity value="w5" /> <map value="FiveWs.why[x]" /> </mapping> <mapping> <identity value="v2" /> <map value="ORC.16, RF1-10" /> </mapping> <mapping> <identity value="rim" /> <map value=".reasonCode" /> </mapping> </element> <element id="ServiceRequest.reasonReference"> <path value="ServiceRequest.reasonReference" /> <short value="Explanation/Justification for service or service" /> <definition value="Indicates another resource that provides a justification for why this service is being requested. May relate to the resources referred to in `supportingInfo`." /> <comment value="This element represents why the referral is being made and may be used to decide how the service will be performed, or even if it will be performed at all. To be as specific as possible, a reference to *Observation* or *Condition* should be used if available. Otherwise when referencing *DiagnosticReport* it should contain a finding in `DiagnosticReport.conclusion` and/or `DiagnosticReport.conclusionCode`. When using a reference to *DocumentReference*, the target document should contain clear findings language providing the relevant reason for this service request. Use the CodeableConcept text element in `ServiceRequest.reasonCode` if the data is free (uncoded) text as shown in the [CT Scan example](servicerequest-example-di.html)." /> <min value="0" /> <max value="0" /> <base> <path value="ServiceRequest.reasonReference" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Reference" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Condition" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Observation" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/DiagnosticReport" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/DocumentReference" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ref-1" /> <severity value="error" /> <human value="SHALL have a contained resource if a local reference is provided" /> <expression value="reference.exists() implies (reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')) or (reference='#' and %rootResource!=%resource))" /> <xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Reference" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" /> </mapping> <mapping> <identity value="workflow" /> <map value="Request.reasonReference" /> </mapping> <mapping> <identity value="w5" /> <map value="FiveWs.why[x]" /> </mapping> <mapping> <identity value="v2" /> <map value="ORC.16" /> </mapping> <mapping> <identity value="rim" /> <map value=".outboundRelationship[typeCode=RSON].target" /> </mapping> </element> <element id="ServiceRequest.insurance"> <path value="ServiceRequest.insurance" /> <short value="Associated insurance coverage" /> <definition value="Insurance plans, coverage extensions, pre-authorizations and/or pre-determinations that may be needed for delivering the requested service." /> <comment value="References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository." /> <min value="0" /> <max value="0" /> <base> <path value="ServiceRequest.insurance" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Reference" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Coverage" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/ClaimResponse" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ref-1" /> <severity value="error" /> <human value="SHALL have a contained resource if a local reference is provided" /> <expression value="reference.exists() implies (reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')) or (reference='#' and %rootResource!=%resource))" /> <xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Reference" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" /> </mapping> <mapping> <identity value="workflow" /> <map value="Request.insurance" /> </mapping> <mapping> <identity value="v2" /> <map value="IN1/IN2" /> </mapping> <mapping> <identity value="rim" /> <map value=".outboundRelationship[typeCode=COVBY].target" /> </mapping> </element> <element id="ServiceRequest.supportingInfo"> <path value="ServiceRequest.supportingInfo" /> <short value="Additional clinical information" /> <definition value="Additional clinical information about the patient or specimen that may influence the services or their interpretations. This information includes diagnosis, clinical findings and other observations. In laboratory ordering these are typically referred to as "ask at order entry questions (AOEs)". This includes observations explicitly requested by the producer (filler) to provide context or supporting information needed to complete the order. For example, reporting the amount of inspired oxygen for blood gas measurements." /> <comment value="To represent information about how the services are to be delivered use the `instructions` element." /> <alias value="Ask at order entry question" /> <alias value="AOE" /> <min value="0" /> <max value="0" /> <base> <path value="ServiceRequest.supportingInfo" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Reference" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Resource" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ref-1" /> <severity value="error" /> <human value="SHALL have a contained resource if a local reference is provided" /> <expression value="reference.exists() implies (reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')) or (reference='#' and %rootResource!=%resource))" /> <xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Reference" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" /> </mapping> <mapping> <identity value="workflow" /> <map value="Request.supportingInfo" /> </mapping> <mapping> <identity value="v2" /> <map value="Accompanying segments" /> </mapping> <mapping> <identity value="rim" /> <map value=".outboundRelationship[typeCode=PERT].target" /> </mapping> </element> <element id="ServiceRequest.specimen"> <path value="ServiceRequest.specimen" /> <short value="Procedure Samples" /> <definition value="One or more specimens that the laboratory procedure will use." /> <comment value="Many diagnostic procedures need a specimen, but the request itself is not actually about the specimen. This element is for when the diagnostic is requested on already existing specimens and the request points to the specimen it applies to. Conversely, if the request is entered first with an unknown specimen, then the [Specimen](specimen.html) resource points to the ServiceRequest." /> <min value="0" /> <max value="0" /> <base> <path value="ServiceRequest.specimen" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Reference" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Specimen" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ref-1" /> <severity value="error" /> <human value="SHALL have a contained resource if a local reference is provided" /> <expression value="reference.exists() implies (reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')) or (reference='#' and %rootResource!=%resource))" /> <xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Reference" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" /> </mapping> <mapping> <identity value="v2" /> <map value="SPM" /> </mapping> <mapping> <identity value="rim" /> <map value=".participation[typeCode=SPC].role" /> </mapping> </element> <element id="ServiceRequest.bodySite"> <path value="ServiceRequest.bodySite" /> <short value="Location on Body" /> <definition value="Anatomic location where the procedure should be performed. This is the target site." /> <comment value="Only used if not implicit in the code found in ServiceRequest.code. If the use case requires BodySite to be handled as a separate resource instead of an inline coded element (e.g. to identify and track separately) then use the standard extension [procedure-targetBodyStructure](extension-procedure-targetbodystructure.html)." /> <requirements value="Knowing where the procedure is performed is important for tracking if multiple sites are possible." /> <alias value="location" /> <min value="0" /> <max value="0" /> <base> <path value="ServiceRequest.bodySite" /> <min value="0" /> <max value="*" /> </base> <type> <code value="CodeableConcept" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="BodySite" /> </extension> <strength value="example" /> <description value="Codes describing anatomical locations. May include laterality." /> <valueSet value="http://hl7.org/fhir/ValueSet/body-site" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CE/CNE/CWE" /> </mapping> <mapping> <identity value="rim" /> <map value="CD" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:CodeableConcept rdfs:subClassOf dt:CD" /> </mapping> <mapping> <identity value="v2" /> <map value="SPM" /> </mapping> <mapping> <identity value="rim" /> <map value="targetSiteCode" /> </mapping> <mapping> <identity value="quick" /> <map value="Procedure.targetBodySite" /> </mapping> </element> <element id="ServiceRequest.note"> <path value="ServiceRequest.note" /> <short value="Comentários" /> <definition value="Quaisquer outras notas e comentários feitos sobre a solicitação de serviço. Por exemplo, notas de cobrança interna." /> <comment value="Para sistemas que não possuem anotações estruturadas, eles podem simplesmente comunicar uma única anotação sem autor ou hora. Esse elemento pode precisar ser incluído na narrativa devido ao potencial de modificar informações. *Anotações NÃO DEVEM* ser usadas para comunicar informações "modificadoras" que possam ser computáveis. (Este é um DEVE porque impor o comportamento do usuário é quase impossível)." /> <min value="0" /> <max value="*" /> <base> <path value="ServiceRequest.note" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Annotation" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="N/A" /> </mapping> <mapping> <identity value="rim" /> <map value="Act" /> </mapping> <mapping> <identity value="workflow" /> <map value="Request.note" /> </mapping> <mapping> <identity value="v2" /> <map value="NTE" /> </mapping> <mapping> <identity value="rim" /> <map value=".inboundRelationship(typeCode=SUBJ].source[classCode=ANNGEN, moodCode=EVN].value[xsi:type=ST]" /> </mapping> <mapping> <identity value="quick" /> <map value="ClinicalStatement.additionalText" /> </mapping> </element> <element id="ServiceRequest.note.id"> <path value="ServiceRequest.note.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="ServiceRequest.note.extension"> <path value="ServiceRequest.note.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="ServiceRequest.note.author[x]"> <path value="ServiceRequest.note.author[x]" /> <short value="Individual responsible for the annotation" /> <definition value="The individual responsible for making the annotation." /> <comment value="Organization is used when there's no need for specific attribution as to who made the comment." /> <min value="0" /> <max value="0" /> <base> <path value="Annotation.author[x]" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Reference" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Practitioner" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Patient" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/RelatedPerson" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Organization" /> </type> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="N/A" /> </mapping> <mapping> <identity value="rim" /> <map value="Act.participant[typeCode=AUT].role" /> </mapping> </element> <element id="ServiceRequest.note.time"> <path value="ServiceRequest.note.time" /> <short value="When the annotation was made" /> <definition value="Indicates when this particular annotation was made." /> <min value="0" /> <max value="0" /> <base> <path value="Annotation.time" /> <min value="0" /> <max value="1" /> </base> <type> <code value="dateTime" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="N/A" /> </mapping> <mapping> <identity value="rim" /> <map value="Act.effectiveTime" /> </mapping> </element> <element id="ServiceRequest.note.text"> <path value="ServiceRequest.note.text" /> <short value="A anotação - conteúdo de texto (como remarcação)" /> <definition value="O texto da anotação no formato markdown." /> <comment value="Os sistemas não precisam ter suporte para remarcação, portanto, o texto deve ser legível sem processamento de remarcação. A sintaxe de markdown é GFM - consulte https://github.github.com/gfm/" /> <min value="1" /> <max value="1" /> <base> <path value="Annotation.text" /> <min value="1" /> <max value="1" /> </base> <type> <code value="markdown" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="N/A" /> </mapping> <mapping> <identity value="rim" /> <map value="Act.text" /> </mapping> </element> <element id="ServiceRequest.patientInstruction"> <path value="ServiceRequest.patientInstruction" /> <short value="Patient or consumer-oriented instructions" /> <definition value="Instructions in terms that are understood by the patient or consumer." /> <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" /> <min value="0" /> <max value="0" /> <base> <path value="ServiceRequest.patientInstruction" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="NTE" /> </mapping> <mapping> <identity value="rim" /> <map value=".text" /> </mapping> </element> <element id="ServiceRequest.relevantHistory"> <path value="ServiceRequest.relevantHistory" /> <short value="Request provenance" /> <definition value="Key events in the history of the request." /> <comment value="This might not include provenances for all versions of the request – only those deemed “relevant” or important. This SHALL NOT include the Provenance associated with this current version of the resource. (If that provenance is deemed to be a “relevant” change, it will need to be added as part of a later update. Until then, it can be queried directly as the Provenance that points to this version using _revinclude All Provenances should have some historical version of this Request as their subject." /> <min value="0" /> <max value="0" /> <base> <path value="ServiceRequest.relevantHistory" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Reference" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Provenance" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ref-1" /> <severity value="error" /> <human value="SHALL have a contained resource if a local reference is provided" /> <expression value="reference.exists() implies (reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')) or (reference='#' and %rootResource!=%resource))" /> <xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Reference" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" /> </mapping> <mapping> <identity value="workflow" /> <map value="Request.relevantHistory" /> </mapping> <mapping> <identity value="v2" /> <map value="N/A" /> </mapping> <mapping> <identity value="rim" /> <map value=".inboundRelationship(typeCode=SUBJ].source[classCode=CACT, moodCode=EVN]" /> </mapping> </element> </snapshot> <differential> <element id="ServiceRequest"> <path value="ServiceRequest" /> <short value="Solicitação de serviço a ser executado" /> <definition value="Um registro de uma solicitação de serviço, como investigações diagnósticas, tratamentos ou operações a serem realizadas." /> </element> <element id="ServiceRequest.identifier"> <path value="ServiceRequest.identifier" /> <slicing> <discriminator> <type value="value" /> <path value="system" /> </discriminator> <rules value="open" /> </slicing> <short value="Identificadores atribuídos a este pedido" /> <definition value="Identificadores atribuídos a esta instância do pedido pelo solicitante e/ou destinatário e/ou executor do pedido." /> <comment value="O elemento identifier.type é usado para distinguir entre os identificadores atribuídos pelo solicitador (conhecido como 'Placer' em HL7 v2) e o produtor das observações em resposta ao pedido (conhecido como 'Filler' em HL7 v2). Para mais discussão e exemplos, consulte a seção de notas de recursos abaixo." /> </element> <element id="ServiceRequest.identifier.use"> <path value="ServiceRequest.identifier.use" /> <definition value="A finalidade desse identificador." /> <comment value="Os aplicativos podem assumir que um identificador é permanente, a menos que diga explicitamente que é temporário." /> <requirements value="Permite que o identificador apropriado para um determinado contexto de uso seja selecionado entre um conjunto de identificadores." /> <min value="1" /> <isModifierReason value="Isso é rotulado como "É modificador" porque os aplicativos não devem confundir um ID temporário com um permanente" /> <binding> <strength value="required" /> <description value="Identifica a finalidade desse identificador, se conhecido." /> <valueSet value="http://hl7.org/fhir/ValueSet/identifier-use" /> </binding> </element> <element id="ServiceRequest.identifier.type"> <path value="ServiceRequest.identifier.type" /> <short value="Descrição do identificador" /> <definition value="Um tipo codificado para o identificador que pode ser usado para determinar qual identificador usar para uma finalidade específica." /> <comment value="Este elemento lida apenas com categorias gerais de identificadores. Não DEVE ser usado para códigos que correspondem 1..1 com o Identifier.system. Alguns identificadores podem cair em várias categorias devido ao uso comum. Onde o sistema é conhecido, um tipo é desnecessário porque o tipo sempre faz parte da definição do sistema. No entanto, os sistemas geralmente precisam lidar com identificadores onde o sistema não é conhecido. Não existe uma relação 1:1 entre tipo e sistema, pois muitos sistemas diferentes têm o mesmo tipo." /> <requirements value="Permite que os usuários façam uso de identificadores quando o sistema identificador não é conhecido." /> <max value="0" /> </element> <element id="ServiceRequest.identifier.type.coding"> <path value="ServiceRequest.identifier.type.coding" /> <short value="Código definido por um sistema de terminologia" /> <definition value="Uma referência a um código definido por um sistema de terminologia." /> <comment value="Os códigos podem ser definidos muito casualmente em enumerações ou listas de códigos, até definições muito formais, como SNOMED CT - consulte os Princípios Básicos do HL7 v3 para obter mais informações. A ordem das codificações é indefinida e NÃO DEVE ser usada para inferir significado. Geralmente, no máximo, apenas um dos valores de codificação será rotulado como UserSelected = true." /> <requirements value="Permite codificações alternativas dentro de um sistema de código e traduções para outros sistemas de código." /> </element> <element id="ServiceRequest.identifier.type.coding.system"> <path value="ServiceRequest.identifier.type.coding.system" /> <short value="Identidade do sistema de terminologia" /> <definition value="A identificação do sistema de código que define o significado do símbolo no código." /> <comment value="O URI pode ser um OID (urn:oid:...) ou um UUID (urn:uuid:...). OIDs e UUIDs DEVEM ser referências ao registro HL7 OID. Caso contrário, o URI deve vir da lista do HL7 de URIs especiais definidos pelo FHIR ou deve fazer referência a alguma definição que estabeleça o sistema de forma clara e inequívoca." /> <requirements value="Precisa ser inequívoco sobre a origem da definição do símbolo." /> </element> <element id="ServiceRequest.identifier.type.coding.version"> <path value="ServiceRequest.identifier.type.coding.version" /> <max value="0" /> </element> <element id="ServiceRequest.identifier.type.coding.userSelected"> <path value="ServiceRequest.identifier.type.coding.userSelected" /> <max value="0" /> </element> <element id="ServiceRequest.identifier.system"> <path value="ServiceRequest.identifier.system" /> <short value="O namespace para o valor do identificador" /> <definition value="Estabelece o namespace para o valor - ou seja, uma URL que descreve um conjunto de valores exclusivos. Na Dasa NameSystem são usados para diferenciar os diferentes sistemas de origem. O namesystem é usado para criar identificadores únicos para sistemas e organizações dentro de uma rede de interoperabilidade. Esses identificadores são necessários para que diferentes sistemas possam se comunicar e compartilhar informações de forma segura e confiável. O namesystem do FHIR é baseado em padrões internacionais e permite a criação de identificadores únicos que são independentes do sistema de origem. Isso ajuda a garantir que os dados sejam consistentes e precisos em toda a rede de interoperabilidade. O namesystem também suporta a validação de identificadores e fornece um mecanismo para registrar novos sistemas e organizações na rede." /> <comment value="Identifier.system sempre diferencia maiúsculas de minúsculas." /> <requirements value="Existem muitos conjuntos de identificadores. Para realizar a correspondência de dois identificadores, precisamos saber com qual conjunto estamos lidando. O sistema identifica um determinado conjunto de identificadores exclusivos." /> <min value="1" /> </element> <element id="ServiceRequest.identifier.value"> <path value="ServiceRequest.identifier.value" /> <short value="O valor que é único" /> <definition value="A porção do identificador normalmente relevante para o usuário e que é única dentro do contexto do sistema." /> <comment value="Se o valor for um URI completo, o sistema DEVERÁ ser urn:ietf:rfc:3986. O objetivo principal do valor é o mapeamento computacional. Como resultado, pode ser normalizado para fins de comparação (por exemplo, remoção de espaços em branco não significativos, traços, etc.) Um valor formatado para exibição humana pode ser transmitido usando a [extensão de valor renderizado](extension-rendered-value.html). Identifier.value deve ser tratado com distinção entre maiúsculas e minúsculas, a menos que o conhecimento do Identifier.system permita que o processador tenha certeza de que o processamento sem distinção entre maiúsculas e minúsculas é seguro." /> <min value="1" /> </element> <element id="ServiceRequest.identifier.period"> <path value="ServiceRequest.identifier.period" /> <max value="0" /> </element> <element id="ServiceRequest.identifier.assigner"> <path value="ServiceRequest.identifier.assigner" /> <max value="0" /> </element> <element id="ServiceRequest.identifier:dasa-navtelemed-prescricao-real_id"> <path value="ServiceRequest.identifier" /> <sliceName value="dasa-navtelemed-prescricao-real_id" /> <short value="Identificador(es) pelo(s) qual(is) este encontro é conhecido" /> <definition value="Identificadores atribuídos a esta instância do pedido pelo solicitante e/ou destinatário e/ou executor do pedido." /> <comment value="Este identificador é legado." /> </element> <element id="ServiceRequest.identifier:dasa-navtelemed-prescricao-real_id.use"> <path value="ServiceRequest.identifier.use" /> <definition value="A finalidade desse identificador." /> <comment value="Os aplicativos podem assumir que um identificador é permanente, a menos que diga explicitamente que é temporário." /> <requirements value="Permite que o identificador apropriado para um determinado contexto de uso seja selecionado entre um conjunto de identificadores." /> <min value="1" /> <fixedCode value="usual" /> <isModifierReason value="Isso é rotulado como "É modificador" porque os aplicativos não devem confundir um ID temporário com um permanente." /> </element> <element id="ServiceRequest.identifier:dasa-navtelemed-prescricao-real_id.type"> <path value="ServiceRequest.identifier.type" /> <max value="0" /> </element> <element id="ServiceRequest.identifier:dasa-navtelemed-prescricao-real_id.system"> <path value="ServiceRequest.identifier.system" /> <short value="O namespace para o valor do identificador" /> <definition value="Estabelece o namespace para o valor - ou seja, uma URL que descreve um conjunto de valores exclusivos." /> <comment value="Identifier.system sempre diferencia maiúsculas de minúsculas." /> <requirements value="Existem muitos conjuntos de identificadores. Para realizar a correspondência de dois identificadores, precisamos saber com qual conjunto estamos lidando. O sistema identifica um determinado conjunto de identificadores exclusivos." /> <min value="1" /> <fixedUri value="https://interoperabilidade.dasa.com.br/fhir/NamingSystem/dasa-navtelemed-prescricao-real_id" /> </element> <element id="ServiceRequest.identifier:dasa-navtelemed-prescricao-real_id.value"> <path value="ServiceRequest.identifier.value" /> <short value="O valor que é único" /> <definition value="A porção do identificador normalmente relevante para o usuário e que é única dentro do contexto do sistema." /> <comment value="Se o valor for um URI completo, o sistema DEVERÁ ser urn:ietf:rfc:3986. O objetivo principal do valor é o mapeamento computacional. Como resultado, pode ser normalizado para fins de comparação (por exemplo, remoção de espaços em branco não significativos, traços, etc.) Um valor formatado para exibição humana pode ser transmitido usando a [extensão de valor renderizado](extension-rendered-value.html). Identifier.value deve ser tratado com distinção entre maiúsculas e minúsculas, a menos que o conhecimento do Identifier.system permita que o processador tenha certeza de que o processamento sem distinção entre maiúsculas e minúsculas é seguro." /> <min value="1" /> </element> <element id="ServiceRequest.identifier:dasa-navtelemed-prescricao-real_id.period"> <path value="ServiceRequest.identifier.period" /> <max value="0" /> </element> <element id="ServiceRequest.identifier:dasa-navtelemed-prescricao-real_id.assigner"> <path value="ServiceRequest.identifier.assigner" /> <max value="0" /> </element> <element id="ServiceRequest.identifier:dasa-navtelemed-prescricao-nav"> <path value="ServiceRequest.identifier" /> <sliceName value="dasa-navtelemed-prescricao-nav" /> <short value="Identificador(es) pelo(s) qual(is) este encontro é conhecido" /> <definition value="Identificadores atribuídos a esta instância do pedido pelo solicitante e/ou destinatário e/ou executor do pedido." /> <comment value="Este identificador é usado para o ID de prescrição da origem para NAVTelemed." /> </element> <element id="ServiceRequest.identifier:dasa-navtelemed-prescricao-nav.use"> <path value="ServiceRequest.identifier.use" /> <definition value="A finalidade desse identificador." /> <comment value="Os aplicativos podem assumir que um identificador é permanente, a menos que diga explicitamente que é temporário." /> <requirements value="Permite que o identificador apropriado para um determinado contexto de uso seja selecionado entre um conjunto de identificadores" /> <min value="1" /> <fixedCode value="usual" /> <isModifierReason value="Isso é rotulado como "É modificador" porque os aplicativos não devem confundir um ID temporário com um permanente.." /> </element> <element id="ServiceRequest.identifier:dasa-navtelemed-prescricao-nav.type"> <path value="ServiceRequest.identifier.type" /> <max value="0" /> </element> <element id="ServiceRequest.identifier:dasa-navtelemed-prescricao-nav.system"> <path value="ServiceRequest.identifier.system" /> <short value="O namespace para o valor do identificador" /> <definition value="Estabelece o namespace para o valor - ou seja, uma URL que descreve um conjunto de valores exclusivos." /> <comment value="Identifier.system sempre diferencia maiúsculas de minúsculas." /> <requirements value="Existem muitos conjuntos de identificadores. Para realizar a correspondência de dois identificadores, precisamos saber com qual conjunto estamos lidando. O sistema identifica um determinado conjunto de identificadores exclusivos." /> <min value="1" /> <fixedUri value="https://interoperabilidade.dasa.com.br/fhir/NamingSystem/dasa-navtelemed-prescricao-nav" /> </element> <element id="ServiceRequest.identifier:dasa-navtelemed-prescricao-nav.value"> <path value="ServiceRequest.identifier.value" /> <short value="O valor que é único" /> <definition value="A porção do identificador normalmente relevante para o usuário e que é única dentro do contexto do sistema." /> <comment value="Se o valor for um URI completo, o sistema DEVERÁ ser urn:ietf:rfc:3986. O objetivo principal do valor é o mapeamento computacional. Como resultado, pode ser normalizado para fins de comparação (por exemplo, remoção de espaços em branco não significativos, traços, etc.) Um valor formatado para exibição humana pode ser transmitido usando a [extensão de valor renderizado](extension-rendered-value.html). Identifier.value deve ser tratado com distinção entre maiúsculas e minúsculas, a menos que o conhecimento do Identifier.system permita que o processador tenha certeza de que o processamento sem distinção entre maiúsculas e minúsculas é seguro." /> <min value="1" /> </element> <element id="ServiceRequest.identifier:dasa-navtelemed-prescricao-nav.period"> <path value="ServiceRequest.identifier.period" /> <max value="0" /> </element> <element id="ServiceRequest.identifier:dasa-navtelemed-prescricao-nav.assigner"> <path value="ServiceRequest.identifier.assigner" /> <max value="0" /> </element> <element id="ServiceRequest.identifier:dasa-navtelemed-prescricao-origem"> <path value="ServiceRequest.identifier" /> <sliceName value="dasa-navtelemed-prescricao-origem" /> <comment value="Este identificador é usado para o ID de prescrição da origem para Memed." /> </element> <element id="ServiceRequest.identifier:dasa-navtelemed-prescricao-origem.use"> <path value="ServiceRequest.identifier.use" /> <definition value="A finalidade desse identificador." /> <comment value="Os aplicativos podem assumir que um identificador é permanente, a menos que diga explicitamente que é temporário." /> <requirements value="Permite que o identificador apropriado para um determinado contexto de uso seja selecionado entre um conjunto de identificadores." /> <min value="1" /> <fixedCode value="secondary" /> <isModifierReason value="Isso é rotulado como "É modificador" porque os aplicativos não devem confundir um ID temporário com um permanente" /> </element> <element id="ServiceRequest.identifier:dasa-navtelemed-prescricao-origem.type"> <path value="ServiceRequest.identifier.type" /> <max value="0" /> </element> <element id="ServiceRequest.identifier:dasa-navtelemed-prescricao-origem.system"> <path value="ServiceRequest.identifier.system" /> <short value="O namespace para o valor do identificador" /> <definition value="Estabelece o namespace para o valor - ou seja, uma URL que descreve um conjunto de valores exclusivos." /> <comment value="Identifier.system sempre diferencia maiúsculas de minúsculas." /> <requirements value="Existem muitos conjuntos de identificadores. Para realizar a correspondência de dois identificadores, precisamos saber com qual conjunto estamos lidando. O sistema identifica um determinado conjunto de identificadores exclusivos." /> <min value="1" /> <fixedUri value="https://interoperabilidade.dasa.com.br/fhir/NamingSystem/dasa-navtelemed-prescricao-origem" /> </element> <element id="ServiceRequest.identifier:dasa-navtelemed-prescricao-origem.value"> <path value="ServiceRequest.identifier.value" /> <short value="O valor que é único" /> <definition value="A porção do identificador normalmente relevante para o usuário e que é única dentro do contexto do sistema." /> <comment value="Se o valor for um URI completo, o sistema DEVERÁ ser urn:ietf:rfc:3986. O objetivo principal do valor é o mapeamento computacional. Como resultado, pode ser normalizado para fins de comparação (por exemplo, remoção de espaços em branco não significativos, traços, etc.) Um valor formatado para exibição humana pode ser transmitido usando a [extensão de valor renderizado](extension-rendered-value.html). Identifier.value deve ser tratado com distinção entre maiúsculas e minúsculas, a menos que o conhecimento do Identifier.system permita que o processador tenha certeza de que o processamento sem distinção entre maiúsculas e minúsculas é seguro." /> <min value="1" /> </element> <element id="ServiceRequest.identifier:dasa-navtelemed-prescricao-origem.period"> <path value="ServiceRequest.identifier.period" /> <max value="0" /> </element> <element id="ServiceRequest.identifier:dasa-navtelemed-prescricao-origem.assigner"> <path value="ServiceRequest.identifier.assigner" /> <max value="0" /> </element> <element id="ServiceRequest.instantiatesCanonical"> <path value="ServiceRequest.instantiatesCanonical" /> <max value="0" /> </element> <element id="ServiceRequest.instantiatesUri"> <path value="ServiceRequest.instantiatesUri" /> <max value="0" /> </element> <element id="ServiceRequest.basedOn"> <path value="ServiceRequest.basedOn" /> <max value="0" /> </element> <element id="ServiceRequest.replaces"> <path value="ServiceRequest.replaces" /> <max value="0" /> </element> <element id="ServiceRequest.requisition"> <path value="ServiceRequest.requisition" /> <max value="0" /> </element> <element id="ServiceRequest.status"> <path value="ServiceRequest.status" /> <definition value="O status do pedido." /> <comment value="O status geralmente está totalmente sob controle do solicitante - eles determinam se o pedido é rascunho ou ativo e, depois de ativado, concluído, cancelado ou suspenso. Os estados relativos às atividades do performer são refletidos no evento correspondente (consulte [Event Pattern](event.html) para discussão geral) ou usando o recurso [Task](task.html)." /> <isModifierReason value="Este elemento é rotulado como um modificador porque é um elemento de status que contém o status inserido com erro, o que significa que o recurso não deve ser tratado como válido" /> <binding> <strength value="required" /> <description value="O status de uma ordem de serviço." /> <valueSet value="http://hl7.org/fhir/ValueSet/request-status" /> </binding> </element> <element id="ServiceRequest.intent"> <path value="ServiceRequest.intent" /> <definition value="Seja a solicitação uma proposta, plano, pedido original ou pedido reflexo." /> <comment value="Esse elemento é rotulado como um modificador porque a intenção altera quando e como o recurso é realmente aplicável." /> <isModifierReason value="Este elemento altera a interpretação de todos os atributos descritivos. Por exemplo, "a hora em que a solicitação é recomendada" vs. "a hora em que a solicitação é autorizada a ocorrer" ou "quem é recomendado para realizar a solicitação" vs. "quem está autorizado a realizar a solicitação." /> <binding> <strength value="required" /> <description value="O tipo de solicitação de serviço." /> </binding> </element> <element id="ServiceRequest.category"> <path value="ServiceRequest.category" /> <max value="0" /> </element> <element id="ServiceRequest.priority"> <path value="ServiceRequest.priority" /> <max value="0" /> </element> <element id="ServiceRequest.doNotPerform"> <path value="ServiceRequest.doNotPerform" /> <max value="0" /> </element> <element id="ServiceRequest.code"> <path value="ServiceRequest.code" /> <short value="O que está sendo solicitado/pedido" /> <definition value="Um código que identifica um determinado serviço (ou seja, procedimento, investigação diagnóstica ou painel de investigações) que foi solicitado." /> <comment value="Muitos códigos de procedimento de laboratório e radiologia incorporam o sistema de amostra/órgão no nome do pedido de teste, por exemplo, soro ou soro/glicose plasmática ou uma radiografia de tórax. A amostra pode não ser registrada separadamente do código do teste." /> <binding> <strength value="example" /> <description value="Códigos para testes ou serviços que podem ser realizados por um indivíduo, organização ou serviço de saúde designado. Para laboratório, LOINC é (preferencial)[http://build.fhir.org/terminologies.html#preferred] e um conjunto de valores usando códigos de pedido LOINC está disponível [aqui](valueset-diagnostic-requests.html)." /> <valueSet value="https://www.vivianteste.example.com.br/fhir/r4/CodeSystem/tuss" /> </binding> </element> <element id="ServiceRequest.code.coding"> <path value="ServiceRequest.code.coding" /> <short value="Código definido por um sistema de terminologia" /> <definition value="Uma referência a um código definido por um sistema de terminologia." /> <comment value="Os códigos podem ser definidos muito casualmente em enumerações ou listas de códigos, até definições muito formais, como SNOMED CT - consulte os Princípios Básicos do HL7 v3 para obter mais informações. A ordem das codificações é indefinida e NÃO DEVE ser usada para inferir significado. Geralmente, no máximo, apenas um dos valores de codificação será rotulado como UserSelected = true." /> <requirements value="Permite codificações alternativas dentro de um sistema de código e traduções para outros sistemas de código." /> </element> <element id="ServiceRequest.code.coding.system"> <path value="ServiceRequest.code.coding.system" /> <short value="Identidade do sistema de terminologia" /> <definition value="A identificação do sistema de código que define o significado do símbolo no código." /> <comment value="O URI pode ser um OID (urn:oid:...) ou um UUID (urn:uuid:...). OIDs e UUIDs DEVEM ser referências ao registro HL7 OID. Caso contrário, o URI deve vir da lista do HL7 de URIs especiais definidos pelo FHIR ou deve fazer referência a alguma definição que estabeleça o sistema de forma clara e inequívoca." /> <requirements value="Precisa ser inequívoco sobre a origem da definição do símbolo." /> <binding> <strength value="example" /> <description value="Códigos para serviços que podem ser realizados por um indivíduo, organização ou serviço de saúde designado." /> <valueSet value="https://www.vivianteste.example.com.br/fhir/r4/CodeSystem/tuss" /> </binding> </element> <element id="ServiceRequest.code.coding.version"> <path value="ServiceRequest.code.coding.version" /> <max value="0" /> </element> <element id="ServiceRequest.code.coding.code"> <path value="ServiceRequest.code.coding.code" /> <short value="Símbolo na sintaxe definida pelo sistema" /> <definition value="Um símbolo na sintaxe definida pelo sistema. O símbolo pode ser um código predefinido ou uma expressão em uma sintaxe definida pelo sistema de codificação (por exemplo, pós-coordenação)." /> <comment value="Observe que as strings FHIR NÃO DEVEM exceder 1 MB de tamanho" /> <requirements value="Necessidade de se referir a um determinado código no sistema." /> </element> <element id="ServiceRequest.code.coding.display"> <path value="ServiceRequest.code.coding.display" /> <short value="Representação definida pelo sistema" /> <definition value="Uma representação do significado do código no sistema, seguindo as regras do sistema." /> <comment value="Observe que as strings FHIR NÃO DEVEM exceder 1 MB de tamanho" /> <requirements value="Precisa ser capaz de transmitir um significado do código legível por humanos para leitores que não conhecem o sistema." /> </element> <element id="ServiceRequest.code.coding.userSelected"> <path value="ServiceRequest.code.coding.userSelected" /> <max value="0" /> </element> <element id="ServiceRequest.code.text"> <path value="ServiceRequest.code.text" /> <max value="0" /> </element> <element id="ServiceRequest.orderDetail"> <path value="ServiceRequest.orderDetail" /> <max value="0" /> </element> <element id="ServiceRequest.quantity[x]"> <path value="ServiceRequest.quantity[x]" /> <max value="0" /> </element> <element id="ServiceRequest.subject"> <path value="ServiceRequest.subject" /> <short value="Indivíduo ou Entidade para a qual o serviço é solicitado" /> <definition value="Em quem ou o que o serviço deve ser executado. Isso geralmente é um paciente humano, mas também pode ser solicitado em animais, grupos de humanos ou animais, dispositivos como máquinas de diálise ou até mesmo locais (normalmente para exames ambientais)." /> <comment value="As referências DEVEM ser uma referência a um recurso FHIR real e DEVEM ser resolvíveis (permitindo controle de acesso, indisponibilidade temporária, etc.). A resolução pode ser por recuperação da URL ou, quando aplicável por tipo de recurso, tratando uma referência absoluta como uma URL canônica e procurando-a em um registro/repositório local." /> </element> <element id="ServiceRequest.subject.reference"> <path value="ServiceRequest.subject.reference" /> <short value="Referência literal, URL relativa, interna ou absoluta" /> <definition value="Uma referência a um local no qual o outro recurso é encontrado. A referência pode ser uma referência relativa, caso em que é relativa à URL base do serviço, ou uma URL absoluta que resolve para o local onde o recurso é encontrado. A referência pode ser específica da versão ou não. Se a referência não for a um servidor FHIR RESTful, deve-se presumir que seja específica da versão. Referências de fragmentos internos (começar com '#') referem-se a recursos contidos." /> <comment value="O uso de URLs absolutos fornece uma abordagem escalável estável adequada para um contexto de nuvem/web, enquanto o uso de referências relativas/lógicas fornece uma abordagem flexível adequada para uso ao negociar em limites de ecossistemas fechados. URLs absolutos não precisam apontar para um servidor FHIR RESTful, embora essa seja a abordagem preferida. Se a URL estiver em conformidade com a estrutura "/[type]/[id]", deve-se presumir que a referência é a um servidor FHIR RESTful." /> </element> <element id="ServiceRequest.subject.type"> <path value="ServiceRequest.subject.type" /> <short value="Digite a referência a que se refere (por exemplo, "Paciente")" /> <definition value="O tipo esperado do destino da referência. Se ambos Reference.type e Reference.reference forem preenchidos e Reference.reference for um URL FHIR, ambos DEVEM ser consistentes. O tipo é a URL Canônica da Definição de Recurso que é o tipo ao qual esta referência se refere. Referências são URLs relativos a http://hl7.org/fhir/StructureDefinition/ por exemplo "Paciente" é uma referência a http://hl7.org/fhir/StructureDefinition/Patient. URLs absolutos são permitidos apenas para modelos lógicos (e só podem ser usados em referências em modelos lógicos, não em recursos)." /> <comment value="Este elemento é usado para indicar o tipo de destino da referência. Isso pode ser usado qualquer um dos outros elementos preenchidos (ou não). Em alguns casos, o tipo de destino pode ser determinado pela inspeção da referência (por exemplo, uma URL RESTful) ou pela resolução do destino da referência; se o tipo e a referência forem fornecidos, a referência DEVERÁ resolver para um recurso do mesmo tipo que o especificado." /> </element> <element id="ServiceRequest.subject.identifier"> <path value="ServiceRequest.subject.identifier" /> <short value="Referência lógica, quando a referência literal não é conhecida" /> <definition value="Um identificador para o recurso de destino. Isso é usado quando não há como referenciar o outro recurso diretamente, porque a entidade que ele representa não está disponível por meio de um servidor FHIR ou porque não há como o autor do recurso converter um identificador conhecido em um local real . Não há exigência de que um identificador de Referência aponte para algo que está realmente exposto como uma instância FHIR, mas DEVE apontar para um conceito de negócios que seria esperado ser exposto como uma instância FHIR, e essa instância precisaria ser de um Tipo de recurso FHIR permitido pela referência." /> <comment value="Quando um identificador é fornecido no lugar de uma referência, qualquer sistema que processa a referência só poderá resolver o identificador para uma referência se entender o contexto de negócios no qual o identificador é usado. Às vezes, isso é global (por exemplo, um identificador nacional), mas geralmente não é. Por esse motivo, nenhum dos mecanismos úteis descritos para trabalhar com referências (por exemplo, encadeamento, inclusões) é possível, nem se deve esperar que os servidores sejam capazes de resolver a referência. Os servidores podem aceitar uma referência baseada em identificador intacta, resolvê-la e/ou rejeitá-la - consulte CapabilityStatement.rest.resource.referencePolicy. Quando um identificador e uma referência literal são fornecidos, a referência literal é preferida. Os aplicativos que processam o recurso são permitidos - mas não obrigatórios - para verificar se o identificador corresponde à referência literal Os aplicativos que convertem uma referência lógica em uma referência literal podem optar por deixar a referência lógica presente ou removê-la. A referência destina-se a apontar para uma estrutura que pode potencialmente ser expressa como um recurso FHIR, embora não haja necessidade de existir como uma instância de recurso FHIR real - exceto na medida em que um aplicativo deseja encontrar o destino da referência . O conteúdo referido como o identificador deve atender às restrições lógicas implícitas por quaisquer limitações sobre quais tipos de recursos são permitidos para a referência. Por exemplo, não seria legítimo enviar o identificador de uma receita de medicamento se o tipo fosse Referência(Observação|Relatório de Diagnóstico). Um dos casos de uso para Reference.identifier é a situação em que não existe nenhuma representação FHIR (em que o tipo é Reference (Any)" /> </element> <element id="ServiceRequest.subject.identifier.use"> <path value="ServiceRequest.subject.identifier.use" /> <max value="0" /> </element> <element id="ServiceRequest.subject.identifier.type"> <path value="ServiceRequest.subject.identifier.type" /> <max value="0" /> </element> <element id="ServiceRequest.subject.identifier.system"> <path value="ServiceRequest.subject.identifier.system" /> <short value="Identidade do sistema de terminologia" /> <definition value="Estabelece o namespace para o valor - ou seja, uma URL que descreve um conjunto de valores exclusivos. Na Dasa NameSystem são usados para diferenciar os diferentes sistemas de origem. O namesystem é usado para criar identificadores únicos para sistemas e organizações dentro de uma rede de interoperabilidade. Esses identificadores são necessários para que diferentes sistemas possam se comunicar e compartilhar informações de forma segura e confiável. O namesystem do FHIR é baseado em padrões internacionais e permite a criação de identificadores únicos que são independentes do sistema de origem. Isso ajuda a garantir que os dados sejam consistentes e precisos em toda a rede de interoperabilidade. O namesystem também suporta a validação de identificadores e fornece um mecanismo para registrar novos sistemas e organizações na rede." /> <comment value="Identifier.system sempre diferencia maiúsculas de minúsculas." /> <requirements value="Existem muitos conjuntos de identificadores. Para realizar a correspondência de dois identificadores, precisamos saber com qual conjunto estamos lidando. O sistema identifica um determinado conjunto de identificadores exclusivos." /> </element> <element id="ServiceRequest.subject.identifier.value"> <path value="ServiceRequest.subject.identifier.value" /> <short value="O valor que é único" /> <definition value="A porção do identificador normalmente relevante para o usuário e que é única dentro do contexto do sistema." /> <comment value="Se o valor for um URI completo, o sistema DEVERÁ ser urn:ietf:rfc:3986. O objetivo principal do valor é o mapeamento computacional. Como resultado, pode ser normalizado para fins de comparação (por exemplo, remoção de espaços em branco não significativos, traços, etc.) Um valor formatado para exibição humana pode ser transmitido usando a [extensão de valor renderizado](extension-rendered-value.html). Identifier.value deve ser tratado com distinção entre maiúsculas e minúsculas, a menos que o conhecimento do Identifier.system permita que o processador tenha certeza de que o processamento sem distinção entre maiúsculas e minúsculas é seguro." /> </element> <element id="ServiceRequest.subject.identifier.period"> <path value="ServiceRequest.subject.identifier.period" /> <max value="0" /> </element> <element id="ServiceRequest.subject.identifier.assigner"> <path value="ServiceRequest.subject.identifier.assigner" /> <max value="0" /> </element> <element id="ServiceRequest.subject.display"> <path value="ServiceRequest.subject.display" /> <short value="Texto alternativo para o recurso" /> <definition value="Narrativa de texto simples que identifica o recurso além da referência do recurso." /> <comment value="Isso geralmente não é o mesmo que o Resource.text do recurso referenciado. O objetivo é identificar o que está sendo referenciado, não descrevê-lo completamente." /> </element> <element id="ServiceRequest.encounter"> <path value="ServiceRequest.encounter" /> <short value="Encontro em que a solicitação foi criada" /> <definition value="Um encontro que fornece informações adicionais sobre o contexto de saúde em que essa solicitação é feita." /> <comment value="As referências DEVEM ser uma referência a um recurso FHIR real e DEVEM ser resolvíveis (permitindo controle de acesso, indisponibilidade temporária, etc.). A resolução pode ser por recuperação da URL ou, quando aplicável por tipo de recurso, tratando uma referência absoluta como uma URL canônica e procurando-a em um registro/repositório local." /> </element> <element id="ServiceRequest.encounter.reference"> <path value="ServiceRequest.encounter.reference" /> <short value="Referência literal, URL relativa, interna ou absoluta" /> <definition value="Uma referência a um local no qual o outro recurso é encontrado. A referência pode ser uma referência relativa, caso em que é relativa à URL base do serviço, ou uma URL absoluta que resolve para o local onde o recurso é encontrado. A referência pode ser específica da versão ou não. Se a referência não for a um servidor FHIR RESTful, deve-se presumir que seja específica da versão. Referências de fragmentos internos (começar com '#') referem-se a recursos contidos." /> <comment value="O uso de URLs absolutos fornece uma abordagem escalável estável adequada para um contexto de nuvem/web, enquanto o uso de referências relativas/lógicas fornece uma abordagem flexível adequada para uso ao negociar em limites de ecossistemas fechados. URLs absolutos não precisam apontar para um servidor FHIR RESTful, embora essa seja a abordagem preferida. Se a URL estiver em conformidade com a estrutura "/[type]/[id]", deve-se presumir que a referência é a um servidor FHIR RESTful." /> </element> <element id="ServiceRequest.encounter.type"> <path value="ServiceRequest.encounter.type" /> <short value="Digite a referência a que se refere (por exemplo, "Pacient")" /> <definition value="O tipo esperado do destino da referência. Se ambos Reference.type e Reference.reference forem preenchidos e Reference.reference for um URL FHIR, ambos DEVEM ser consistentes. O tipo é a URL Canônica da Definição de Recurso que é o tipo ao qual esta referência se refere. Referências são URLs relativos a http://hl7.org/fhir/StructureDefinition/ por exemplo "Paciente" é uma referência a http://hl7.org/fhir/StructureDefinition/Patient. URLs absolutos são permitidos apenas para modelos lógicos (e só podem ser usados em referências em modelos lógicos, não em recursos)." /> <comment value="Este elemento é usado para indicar o tipo de destino da referência. Isso pode ser usado qualquer um dos outros elementos preenchidos (ou não). Em alguns casos, o tipo de destino pode ser determinado pela inspeção da referência (por exemplo, uma URL RESTful) ou pela resolução do destino da referência; se o tipo e a referência forem fornecidos, a referência DEVERÁ resolver para um recurso do mesmo tipo que o especificado." /> </element> <element id="ServiceRequest.encounter.identifier"> <path value="ServiceRequest.encounter.identifier" /> <short value="Referência lógica, quando a referência literal não é conhecida" /> <definition value="Um identificador para o recurso de destino. Isso é usado quando não há como referenciar o outro recurso diretamente, porque a entidade que ele representa não está disponível por meio de um servidor FHIR ou porque não há como o autor do recurso converter um identificador conhecido em um local real . Não há exigência de que um identificador de Referência aponte para algo que está realmente exposto como uma instância FHIR, mas DEVE apontar para um conceito de negócios que seria esperado ser exposto como uma instância FHIR, e essa instância precisaria ser de um Tipo de recurso FHIR permitido pela referência." /> <comment value="Quando um identificador é fornecido no lugar de uma referência, qualquer sistema que processa a referência só poderá resolver o identificador para uma referência se entender o contexto de negócios no qual o identificador é usado. Às vezes, isso é global (por exemplo, um identificador nacional), mas geralmente não é. Por esse motivo, nenhum dos mecanismos úteis descritos para trabalhar com referências (por exemplo, encadeamento, inclusões) é possível, nem se deve esperar que os servidores sejam capazes de resolver a referência. Os servidores podem aceitar uma referência baseada em identificador intacta, resolvê-la e/ou rejeitá-la - consulte CapabilityStatement.rest.resource.referencePolicy. Quando um identificador e uma referência literal são fornecidos, a referência literal é preferida. Os aplicativos que processam o recurso são permitidos - mas não obrigatórios - para verificar se o identificador corresponde à referência literal Os aplicativos que convertem uma referência lógica em uma referência literal podem optar por deixar a referência lógica presente ou removê-la. A referência destina-se a apontar para uma estrutura que pode potencialmente ser expressa como um recurso FHIR, embora não haja necessidade de existir como uma instância de recurso FHIR real - exceto na medida em que um aplicativo deseja encontrar o destino da referência . O conteúdo referido como o identificador deve atender às restrições lógicas implícitas por quaisquer limitações sobre quais tipos de recursos são permitidos para a referência. Por exemplo, não seria legítimo enviar o identificador de uma receita de medicamento se o tipo fosse Referência(Observação|Relatório de Diagnóstico). Um dos casos de uso para Reference.identifier é a situação em que não existe nenhuma representação FHIR (em que o tipo é Reference (Any)" /> </element> <element id="ServiceRequest.encounter.identifier.use"> <path value="ServiceRequest.encounter.identifier.use" /> <max value="0" /> </element> <element id="ServiceRequest.encounter.identifier.type"> <path value="ServiceRequest.encounter.identifier.type" /> <max value="0" /> </element> <element id="ServiceRequest.encounter.identifier.system"> <path value="ServiceRequest.encounter.identifier.system" /> <short value="Identidade do sistema de terminologia" /> <definition value="Estabelece o namespace para o valor - ou seja, uma URL que descreve um conjunto de valores exclusivos. Na Dasa NameSystem são usados para diferenciar os diferentes sistemas de origem. O namesystem é usado para criar identificadores únicos para sistemas e organizações dentro de uma rede de interoperabilidade. Esses identificadores são necessários para que diferentes sistemas possam se comunicar e compartilhar informações de forma segura e confiável. O namesystem do FHIR é baseado em padrões internacionais e permite a criação de identificadores únicos que são independentes do sistema de origem. Isso ajuda a garantir que os dados sejam consistentes e precisos em toda a rede de interoperabilidade. O namesystem também suporta a validação de identificadores e fornece um mecanismo para registrar novos sistemas e organizações na rede." /> <comment value="Identifier.system sempre diferencia maiúsculas de minúsculas." /> <requirements value="Existem muitos conjuntos de identificadores. Para realizar a correspondência de dois identificadores, precisamos saber com qual conjunto estamos lidando. O sistema identifica um determinado conjunto de identificadores exclusivos." /> </element> <element id="ServiceRequest.encounter.identifier.value"> <path value="ServiceRequest.encounter.identifier.value" /> <short value="O valor que é único" /> <definition value="A porção do identificador normalmente relevante para o usuário e que é única dentro do contexto do sistema." /> <comment value="Se o valor for um URI completo, o sistema DEVERÁ ser urn:ietf:rfc:3986. O objetivo principal do valor é o mapeamento computacional. Como resultado, pode ser normalizado para fins de comparação (por exemplo, remoção de espaços em branco não significativos, traços, etc.) Um valor formatado para exibição humana pode ser transmitido usando a [extensão de valor renderizado](extension-rendered-value.html). Identifier.value deve ser tratado com distinção entre maiúsculas e minúsculas, a menos que o conhecimento do Identifier.system permita que o processador tenha certeza de que o processamento sem distinção entre maiúsculas e minúsculas é seguro." /> </element> <element id="ServiceRequest.encounter.identifier.period"> <path value="ServiceRequest.encounter.identifier.period" /> <max value="0" /> </element> <element id="ServiceRequest.encounter.identifier.assigner"> <path value="ServiceRequest.encounter.identifier.assigner" /> <max value="0" /> </element> <element id="ServiceRequest.encounter.display"> <path value="ServiceRequest.encounter.display" /> <short value="Texto alternativo para o recurso" /> <definition value="Narrativa de texto simples que identifica o recurso além da referência do recurso." /> <comment value="Isso geralmente não é o mesmo que o Resource.text do recurso referenciado. O objetivo é identificar o que está sendo referenciado, não descrevê-lo completamente." /> </element> <element id="ServiceRequest.occurrence[x]"> <path value="ServiceRequest.occurrence[x]" /> <max value="0" /> </element> <element id="ServiceRequest.asNeeded[x]"> <path value="ServiceRequest.asNeeded[x]" /> <max value="0" /> </element> <element id="ServiceRequest.authoredOn"> <path value="ServiceRequest.authoredOn" /> <max value="0" /> </element> <element id="ServiceRequest.requester"> <path value="ServiceRequest.requester" /> <short value="Quem/o que está solicitando o serviço" /> <definition value="O indivíduo que iniciou a solicitação e tem responsabilidade por sua ativação." /> <comment value="Este não é o despachante, mas quem é o autorizador. Este elemento não se destina a lidar com a delegação que geralmente seria gerenciada por meio do recurso Provenance." /> </element> <element id="ServiceRequest.requester.reference"> <path value="ServiceRequest.requester.reference" /> <short value="Referência literal, URL relativa, interna ou absoluta" /> <definition value="Uma referência a um local no qual o outro recurso é encontrado. A referência pode ser uma referência relativa, caso em que é relativa à URL base do serviço, ou uma URL absoluta que resolve para o local onde o recurso é encontrado. A referência pode ser específica da versão ou não. Se a referência não for a um servidor FHIR RESTful, deve-se presumir que seja específica da versão. Referências de fragmentos internos (começar com '#') referem-se a recursos contidos" /> <comment value="O uso de URLs absolutos fornece uma abordagem escalável estável adequada para um contexto de nuvem/web, enquanto o uso de referências relativas/lógicas fornece uma abordagem flexível adequada para uso ao negociar em limites de ecossistemas fechados. URLs absolutos não precisam apontar para um servidor FHIR RESTful, embora essa seja a abordagem preferida. Se a URL estiver em conformidade com a estrutura "/[type]/[id]", deve-se presumir que a referência é a um servidor FHIR RESTful." /> </element> <element id="ServiceRequest.requester.type"> <path value="ServiceRequest.requester.type" /> <short value="Digite a referência a que se refere (por exemplo, "Pacient")" /> <definition value="O tipo esperado do destino da referência. Se ambos Reference.type e Reference.reference forem preenchidos e Reference.reference for um URL FHIR, ambos DEVEM ser consistentes. O tipo é a URL Canônica da Definição de Recurso que é o tipo ao qual esta referência se refere. Referências são URLs relativos a http://hl7.org/fhir/StructureDefinition/ por exemplo "Paciente" é uma referência a http://hl7.org/fhir/StructureDefinition/Patient. URLs absolutos são permitidos apenas para modelos lógicos (e só podem ser usados em referências em modelos lógicos, não em recursos)." /> <comment value="Este elemento é usado para indicar o tipo de destino da referência. Isso pode ser usado qualquer um dos outros elementos preenchidos (ou não). Em alguns casos, o tipo de destino pode ser determinado pela inspeção da referência (por exemplo, uma URL RESTful) ou pela resolução do destino da referência; se o tipo e a referência forem fornecidos, a referência DEVERÁ resolver para um recurso do mesmo tipo que o especificado." /> </element> <element id="ServiceRequest.requester.identifier"> <path value="ServiceRequest.requester.identifier" /> <short value="Referência lógica, quando a referência literal não é conhecida" /> <definition value="Um identificador para o recurso de destino. Isso é usado quando não há como referenciar o outro recurso diretamente, porque a entidade que ele representa não está disponível por meio de um servidor FHIR ou porque não há como o autor do recurso converter um identificador conhecido em um local real . Não há exigência de que um identificador de Referência aponte para algo que está realmente exposto como uma instância FHIR, mas DEVE apontar para um conceito de negócios que seria esperado ser exposto como uma instância FHIR, e essa instância precisaria ser de um Tipo de recurso FHIR permitido pela referência." /> <comment value="Quando um identificador é fornecido no lugar de uma referência, qualquer sistema que processa a referência só poderá resolver o identificador para uma referência se entender o contexto de negócios no qual o identificador é usado. Às vezes, isso é global (por exemplo, um identificador nacional), mas geralmente não é. Por esse motivo, nenhum dos mecanismos úteis descritos para trabalhar com referências (por exemplo, encadeamento, inclusões) é possível, nem se deve esperar que os servidores sejam capazes de resolver a referência. Os servidores podem aceitar uma referência baseada em identificador intacta, resolvê-la e/ou rejeitá-la - consulte CapabilityStatement.rest.resource.referencePolicy. Quando um identificador e uma referência literal são fornecidos, a referência literal é preferida. Os aplicativos que processam o recurso são permitidos - mas não obrigatórios - para verificar se o identificador corresponde à referência literal Os aplicativos que convertem uma referência lógica em uma referência literal podem optar por deixar a referência lógica presente ou removê-la. A referência destina-se a apontar para uma estrutura que pode potencialmente ser expressa como um recurso FHIR, embora não haja necessidade de existir como uma instância de recurso FHIR real - exceto na medida em que um aplicativo deseja encontrar o destino da referência . O conteúdo referido como o identificador deve atender às restrições lógicas implícitas por quaisquer limitações sobre quais tipos de recursos são permitidos para a referência. Por exemplo, não seria legítimo enviar o identificador de uma receita de medicamento se o tipo fosse Referência(Observação|Relatório de Diagnóstico). Um dos casos de uso para Reference.identifier é a situação em que não existe nenhuma representação FHIR (em que o tipo é Reference (Any)" /> </element> <element id="ServiceRequest.requester.identifier.use"> <path value="ServiceRequest.requester.identifier.use" /> <max value="0" /> </element> <element id="ServiceRequest.requester.identifier.type"> <path value="ServiceRequest.requester.identifier.type" /> <max value="0" /> </element> <element id="ServiceRequest.requester.identifier.system"> <path value="ServiceRequest.requester.identifier.system" /> <short value="Identidade do sistema de terminologia" /> <definition value="Estabelece o namespace para o valor - ou seja, uma URL que descreve um conjunto de valores exclusivos. Na Dasa NameSystem são usados para diferenciar os diferentes sistemas de origem. O namesystem é usado para criar identificadores únicos para sistemas e organizações dentro de uma rede de interoperabilidade. Esses identificadores são necessários para que diferentes sistemas possam se comunicar e compartilhar informações de forma segura e confiável. O namesystem do FHIR é baseado em padrões internacionais e permite a criação de identificadores únicos que são independentes do sistema de origem. Isso ajuda a garantir que os dados sejam consistentes e precisos em toda a rede de interoperabilidade. O namesystem também suporta a validação de identificadores e fornece um mecanismo para registrar novos sistemas e organizações na rede." /> <comment value="Identifier.system sempre diferencia maiúsculas de minúsculas." /> <requirements value="Existem muitos conjuntos de identificadores. Para realizar a correspondência de dois identificadores, precisamos saber com qual conjunto estamos lidando. O sistema identifica um determinado conjunto de identificadores exclusivos." /> </element> <element id="ServiceRequest.requester.identifier.value"> <path value="ServiceRequest.requester.identifier.value" /> <short value="O valor que é único" /> <definition value="A porção do identificador normalmente relevante para o usuário e que é única dentro do contexto do sistema." /> <comment value="Se o valor for um URI completo, o sistema DEVERÁ ser urn:ietf:rfc:3986. O objetivo principal do valor é o mapeamento computacional. Como resultado, pode ser normalizado para fins de comparação (por exemplo, remoção de espaços em branco não significativos, traços, etc.) Um valor formatado para exibição humana pode ser transmitido usando a [extensão de valor renderizado](extension-rendered-value.html). Identifier.value deve ser tratado com distinção entre maiúsculas e minúsculas, a menos que o conhecimento do Identifier.system permita que o processador tenha certeza de que o processamento sem distinção entre maiúsculas e minúsculas é seguro." /> </element> <element id="ServiceRequest.requester.identifier.period"> <path value="ServiceRequest.requester.identifier.period" /> <max value="0" /> </element> <element id="ServiceRequest.requester.identifier.assigner"> <path value="ServiceRequest.requester.identifier.assigner" /> <max value="0" /> </element> <element id="ServiceRequest.requester.display"> <path value="ServiceRequest.requester.display" /> <short value="Texto alternativo para o recurso" /> <definition value="Narrativa de texto simples que identifica o recurso além da referência do recurso." /> <comment value="Isso geralmente não é o mesmo que o Resource.text do recurso referenciado. O objetivo é identificar o que está sendo referenciado, não descrevê-lo completamente." /> </element> <element id="ServiceRequest.performerType"> <path value="ServiceRequest.performerType" /> <max value="0" /> </element> <element id="ServiceRequest.performer"> <path value="ServiceRequest.performer" /> <max value="0" /> </element> <element id="ServiceRequest.locationCode"> <path value="ServiceRequest.locationCode" /> <max value="0" /> </element> <element id="ServiceRequest.locationReference"> <path value="ServiceRequest.locationReference" /> <max value="0" /> </element> <element id="ServiceRequest.reasonCode"> <path value="ServiceRequest.reasonCode" /> <max value="0" /> </element> <element id="ServiceRequest.reasonReference"> <path value="ServiceRequest.reasonReference" /> <max value="0" /> </element> <element id="ServiceRequest.insurance"> <path value="ServiceRequest.insurance" /> <max value="0" /> </element> <element id="ServiceRequest.supportingInfo"> <path value="ServiceRequest.supportingInfo" /> <max value="0" /> </element> <element id="ServiceRequest.specimen"> <path value="ServiceRequest.specimen" /> <max value="0" /> </element> <element id="ServiceRequest.bodySite"> <path value="ServiceRequest.bodySite" /> <max value="0" /> </element> <element id="ServiceRequest.note"> <path value="ServiceRequest.note" /> <short value="Comentários" /> <definition value="Quaisquer outras notas e comentários feitos sobre a solicitação de serviço. Por exemplo, notas de cobrança interna." /> <comment value="Para sistemas que não possuem anotações estruturadas, eles podem simplesmente comunicar uma única anotação sem autor ou hora. Esse elemento pode precisar ser incluído na narrativa devido ao potencial de modificar informações. *Anotações NÃO DEVEM* ser usadas para comunicar informações "modificadoras" que possam ser computáveis. (Este é um DEVE porque impor o comportamento do usuário é quase impossível)." /> </element> <element id="ServiceRequest.note.author[x]"> <path value="ServiceRequest.note.author[x]" /> <max value="0" /> </element> <element id="ServiceRequest.note.time"> <path value="ServiceRequest.note.time" /> <max value="0" /> </element> <element id="ServiceRequest.note.text"> <path value="ServiceRequest.note.text" /> <short value="A anotação - conteúdo de texto (como remarcação)" /> <definition value="O texto da anotação no formato markdown." /> <comment value="Os sistemas não precisam ter suporte para remarcação, portanto, o texto deve ser legível sem processamento de remarcação. A sintaxe de markdown é GFM - consulte https://github.github.com/gfm/" /> </element> <element id="ServiceRequest.patientInstruction"> <path value="ServiceRequest.patientInstruction" /> <max value="0" /> </element> <element id="ServiceRequest.relevantHistory"> <path value="ServiceRequest.relevantHistory" /> <max value="0" /> </element> </differential> </StructureDefinition>