<status value="draft" /> <description value="Logisches Modell (LogicalModel) zur Darstellung des Art-Decor-Modells" /> <fhirVersion value="4.0.1" /> <mapping> <identity value="rim" /> <uri value="http://hl7.org/v3" /> <name value="RIM Mapping" /> </mapping> <kind value="logical" /> <abstract value="false" /> <type value="http://LogicalModelTesting.org/StructureDefinition/Geraet" /> <baseDefinition value="http://hl7.org/fhir/StructureDefinition/Element" /> <derivation value="specialization" /> <snapshot> <element id="Geraet"> <path value="Geraet" /> <short value="Gerät" /> <definition value="In diesem Element werden Informationen zu einem Gerät bzw. Medizinprodukt angegeben." /> <alias value="Gerät" /> <min value="0" /> <max value="*" /> <base> <path value="Geraet" /> <min value="0" /> <max value="*" /> </base> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Geraet.id"> <path value="Geraet.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Geraet.extension"> <path value="Geraet.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Geraet.kategorieCodeBezeichnung"> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status"> <valueCode value="normative" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version"> <valueCode value="4.0.0" /> </extension> <path value="Geraet.kategorieCodeBezeichnung" /> <label value="Kategorie - Code/Bezeichnung" /> <short value="Kategorie - Code/Bezeichnung" /> <definition value="Hier wird eine übergeordnete Kategorie für die Art des Geräts angegeben, z. B. Medizinprodukt, Implantat, Laborgerät." /> <alias value="Gerät / Kategorie - Code/Bezeichnung" /> <min value="0" /> <max value="1" /> <base> <path value="Geraet.kategorieCodeBezeichnung" /> <min value="0" /> <max value="1" /> </base> <type> <code value="BackboneElement" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Geraet.kategorieCodeBezeichnung.id"> <path value="Geraet.kategorieCodeBezeichnung.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Geraet.kategorieCodeBezeichnung.extension"> <path value="Geraet.kategorieCodeBezeichnung.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Geraet.kategorieCodeBezeichnung.modifierExtension"> <path value="Geraet.kategorieCodeBezeichnung.modifierExtension" /> <short value="Extensions that cannot be ignored even if unrecognized" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself)." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <requirements value="Modifier extensions allow for extensions that *cannot* be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the [definition of modifier extensions](extensibility.html#modifierExtension)." /> <alias value="extensions" /> <alias value="user content" /> <alias value="modifiers" /> <min value="0" /> <max value="*" /> <base> <path value="BackboneElement.modifierExtension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <isModifier value="true" /> <isModifierReason value="Modifier extensions are expected to modify the meaning or interpretation of the element that contains them" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Geraet.kategorieCodeBezeichnung.codeAuswahl"> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status"> <valueCode value="normative" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version"> <valueCode value="4.0.0" /> </extension> <path value="Geraet.kategorieCodeBezeichnung.codeAuswahl" /> <label value="Code-Auswahl" /> <short value="Code-Auswahl" /> <definition value="Hier werden Codes angegeben." /> <alias value="Gerät / Kategorie - Code/Bezeichnung / Code-Auswahl" /> <min value="0" /> <max value="*" /> <base> <path value="Geraet.kategorieCodeBezeichnung.codeAuswahl" /> <min value="0" /> <max value="*" /> </base> <type> <code value="BackboneElement" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Geraet.kategorieCodeBezeichnung.codeAuswahl.id"> <path value="Geraet.kategorieCodeBezeichnung.codeAuswahl.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Geraet.kategorieCodeBezeichnung.codeAuswahl.extension"> <path value="Geraet.kategorieCodeBezeichnung.codeAuswahl.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Geraet.kategorieCodeBezeichnung.codeAuswahl.modifierExtension"> <path value="Geraet.kategorieCodeBezeichnung.codeAuswahl.modifierExtension" /> <short value="Extensions that cannot be ignored even if unrecognized" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself)." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <requirements value="Modifier extensions allow for extensions that *cannot* be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the [definition of modifier extensions](extensibility.html#modifierExtension)." /> <alias value="extensions" /> <alias value="user content" /> <alias value="modifiers" /> <min value="0" /> <max value="*" /> <base> <path value="BackboneElement.modifierExtension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <isModifier value="true" /> <isModifierReason value="Modifier extensions are expected to modify the meaning or interpretation of the element that contains them" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Geraet.kategorieCodeBezeichnung.codeAuswahl.deviceTypes"> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status"> <valueCode value="normative" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version"> <valueCode value="4.0.0" /> </extension> <path value="Geraet.kategorieCodeBezeichnung.codeAuswahl.deviceTypes" /> <label value="Device Types" /> <short value="Device Types" /> <definition value="Hier wird ein Code erfasst, welcher angibt um welchen Gerätetyp es sich handelt." /> <comment value="Codes may be defined very casually in enumerations or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information." /> <alias value="Gerät / Kategorie - Code/Bezeichnung / Code-Auswahl / Device Types" /> <min value="0" /> <max value="*" /> <base> <path value="Geraet.kategorieCodeBezeichnung.codeAuswahl.deviceTypes" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Coding" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <binding> <strength value="example" /> <valueSet value="http://hl7.org/fhir/ValueSet/device-type" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CE/CNE/CWE subset one of the sets of component 1-3 or 4-6" /> </mapping> <mapping> <identity value="rim" /> <map value="CV" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:Coding rdfs:subClassOf dt:CDCoding" /> </mapping> </element> <element id="Geraet.kategorieCodeBezeichnung.codeAuswahl.codeAusEinemAnderenCodeSystem"> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status"> <valueCode value="normative" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version"> <valueCode value="4.0.0" /> </extension> <path value="Geraet.kategorieCodeBezeichnung.codeAuswahl.codeAusEinemAnderenCodeSystem" /> <label value="Code aus einem anderen Code-System" /> <short value="Code aus einem anderen Code-System" /> <definition value="Hier wird die Kategorie als Code eingetragen, vorzugsweise aus dem Code\-System SNOMED CT® beziehungsweise LOINC®." /> <comment value="**Operationalisierungshinweise** Hier sollte zusätzlich zum Code auch das Code\-System, die Version des Code\-Systems und der Anzeigename (Display Name) übermittelt werden." /> <alias value="Gerät / Kategorie - Code/Bezeichnung / Code-Auswahl / Code aus einem anderen Code-System" /> <min value="0" /> <max value="*" /> <base> <path value="Geraet.kategorieCodeBezeichnung.codeAuswahl.codeAusEinemAnderenCodeSystem" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Coding" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CE/CNE/CWE subset one of the sets of component 1-3 or 4-6" /> </mapping> <mapping> <identity value="rim" /> <map value="CV" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:Coding rdfs:subClassOf dt:CDCoding" /> </mapping> </element> <element id="Geraet.kategorieCodeBezeichnung.bezeichnung"> <path value="Geraet.kategorieCodeBezeichnung.bezeichnung" /> <label value="Bezeichnung" /> <short value="Bezeichnung" /> <definition value="Dieses Element enthält eine freitextliche Bezeichnung der Kategorie des Geräts." /> <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" /> <alias value="Gerät / Kategorie - Code/Bezeichnung / Bezeichnung" /> <min value="0" /> <max value="1" /> <base> <path value="Geraet.kategorieCodeBezeichnung.bezeichnung" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Geraet.spezifischerTypCodeBezeichnung"> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status"> <valueCode value="normative" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version"> <valueCode value="4.0.0" /> </extension> <path value="Geraet.spezifischerTypCodeBezeichnung" /> <label value="Spezifischer Typ - Code/Bezeichnung" /> <short value="Spezifischer Typ - Code/Bezeichnung" /> <definition value="Diese Gruppe enthält die Bezeichnung des Produkts als Code oder als Freitexteintrag. Falls ein Code vorhanden ist, soll der Displayname des Codes in das Feld Freitextbezeichnung übernommen werden. Falls kein Code angegeben wird, muss ein Freitext angegeben werden." /> <alias value="Gerät / Spezifischer Typ - Code/Bezeichnung" /> <min value="1" /> <max value="1" /> <base> <path value="Geraet.spezifischerTypCodeBezeichnung" /> <min value="1" /> <max value="1" /> </base> <type> <code value="BackboneElement" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Geraet.spezifischerTypCodeBezeichnung.id"> <path value="Geraet.spezifischerTypCodeBezeichnung.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Geraet.spezifischerTypCodeBezeichnung.extension"> <path value="Geraet.spezifischerTypCodeBezeichnung.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Geraet.spezifischerTypCodeBezeichnung.modifierExtension"> <path value="Geraet.spezifischerTypCodeBezeichnung.modifierExtension" /> <short value="Extensions that cannot be ignored even if unrecognized" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself)." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <requirements value="Modifier extensions allow for extensions that *cannot* be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the [definition of modifier extensions](extensibility.html#modifierExtension)." /> <alias value="extensions" /> <alias value="user content" /> <alias value="modifiers" /> <min value="0" /> <max value="*" /> <base> <path value="BackboneElement.modifierExtension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <isModifier value="true" /> <isModifierReason value="Modifier extensions are expected to modify the meaning or interpretation of the element that contains them" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Geraet.spezifischerTypCodeBezeichnung.codeAuswahl"> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status"> <valueCode value="normative" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version"> <valueCode value="4.0.0" /> </extension> <path value="Geraet.spezifischerTypCodeBezeichnung.codeAuswahl" /> <label value="Code-Auswahl" /> <short value="Code-Auswahl" /> <definition value="Hier wird der spezifische Gerätetyp in Form eines Codes angegeben." /> <alias value="Gerät / Spezifischer Typ - Code/Bezeichnung / Code-Auswahl" /> <min value="0" /> <max value="*" /> <base> <path value="Geraet.spezifischerTypCodeBezeichnung.codeAuswahl" /> <min value="0" /> <max value="*" /> </base> <type> <code value="BackboneElement" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Geraet.spezifischerTypCodeBezeichnung.codeAuswahl.id"> <path value="Geraet.spezifischerTypCodeBezeichnung.codeAuswahl.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Geraet.spezifischerTypCodeBezeichnung.codeAuswahl.extension"> <path value="Geraet.spezifischerTypCodeBezeichnung.codeAuswahl.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Geraet.spezifischerTypCodeBezeichnung.codeAuswahl.modifierExtension"> <path value="Geraet.spezifischerTypCodeBezeichnung.codeAuswahl.modifierExtension" /> <short value="Extensions that cannot be ignored even if unrecognized" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself)." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <requirements value="Modifier extensions allow for extensions that *cannot* be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the [definition of modifier extensions](extensibility.html#modifierExtension)." /> <alias value="extensions" /> <alias value="user content" /> <alias value="modifiers" /> <min value="0" /> <max value="*" /> <base> <path value="BackboneElement.modifierExtension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <isModifier value="true" /> <isModifierReason value="Modifier extensions are expected to modify the meaning or interpretation of the element that contains them" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Geraet.spezifischerTypCodeBezeichnung.codeAuswahl.snomedCtCode"> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status"> <valueCode value="normative" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version"> <valueCode value="4.0.0" /> </extension> <path value="Geraet.spezifischerTypCodeBezeichnung.codeAuswahl.snomedCtCode" /> <label value="SNOMED CT®-Code" /> <short value="SNOMED CT®-Code" /> <definition value="Hier wird ein Code aus SNOMED CT®\-Code angegeben. Beispiel: Cardiac pacemaker, device (physical object), SCTID: 14106009" /> <comment value="Codes may be defined very casually in enumerations or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information." /> <alias value="Gerät / Spezifischer Typ - Code/Bezeichnung / Code-Auswahl / SNOMED CT®-Code" /> <min value="0" /> <max value="*" /> <base> <path value="Geraet.spezifischerTypCodeBezeichnung.codeAuswahl.snomedCtCode" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Coding" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <binding> <strength value="required" /> <valueSet value="https://fhir.kbv.de/ValueSet/KBV_VS_Base_Device_SNOMED_CT" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CE/CNE/CWE subset one of the sets of component 1-3 or 4-6" /> </mapping> <mapping> <identity value="rim" /> <map value="CV" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:Coding rdfs:subClassOf dt:CDCoding" /> </mapping> </element> <element id="Geraet.spezifischerTypCodeBezeichnung.codeAuswahl.codeAusEinemAnderenCodeSystem"> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status"> <valueCode value="normative" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version"> <valueCode value="4.0.0" /> </extension> <path value="Geraet.spezifischerTypCodeBezeichnung.codeAuswahl.codeAusEinemAnderenCodeSystem" /> <label value="Code aus einem anderen Code-System" /> <short value="Code aus einem anderen Code-System" /> <definition value="Code für die Bezeichnung des Gerätes nach einer frei wählbaren Terminologie." /> <comment value="**Operationalisierungshinweise** Aus technischen Gründen kann dieses Element nicht direkt in FHIR® abgebildet werden. Bei einer Ableitung von diesem Profil können aber beliebige weitere Code\-Systeme hinzugefügt werden (offenes Slicing). Hierbei sollte zusätzlich zum Code auch das Code\-System, die Version des Code\-Systems und der Anzeigename (Display Name) übermittelt werden." /> <alias value="Gerät / Spezifischer Typ - Code/Bezeichnung / Code-Auswahl / Code aus einem anderen Code-System" /> <min value="0" /> <max value="*" /> <base> <path value="Geraet.spezifischerTypCodeBezeichnung.codeAuswahl.codeAusEinemAnderenCodeSystem" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Coding" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CE/CNE/CWE subset one of the sets of component 1-3 or 4-6" /> </mapping> <mapping> <identity value="rim" /> <map value="CV" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:Coding rdfs:subClassOf dt:CDCoding" /> </mapping> </element> <element id="Geraet.spezifischerTypCodeBezeichnung.bezeichnung"> <path value="Geraet.spezifischerTypCodeBezeichnung.bezeichnung" /> <label value="Bezeichnung" /> <short value="Bezeichnung" /> <definition value="Dieses Element enthält eine freitextliche Bezeichnung der Art des Geräts, z. B. "Oberarm\-Blutdruckmessgerät" oder "DDD\-Schrittmacher"." /> <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" /> <alias value="Gerät / Spezifischer Typ - Code/Bezeichnung / Bezeichnung" /> <min value="0" /> <max value="1" /> <base> <path value="Geraet.spezifischerTypCodeBezeichnung.bezeichnung" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Geraet.nameDesGeraetes"> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status"> <valueCode value="normative" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version"> <valueCode value="4.0.0" /> </extension> <path value="Geraet.nameDesGeraetes" /> <label value="Name des Gerätes" /> <short value="Name des Gerätes" /> <definition value="Hier wird der konkrete Name (z.B. der Modellname) des betreffenden Gerätes angegeben." /> <alias value="Gerät / Name des Gerätes" /> <min value="0" /> <max value="*" /> <base> <path value="Geraet.nameDesGeraetes" /> <min value="0" /> <max value="*" /> </base> <type> <code value="BackboneElement" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Geraet.nameDesGeraetes.id"> <path value="Geraet.nameDesGeraetes.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Geraet.nameDesGeraetes.extension"> <path value="Geraet.nameDesGeraetes.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Geraet.nameDesGeraetes.modifierExtension"> <path value="Geraet.nameDesGeraetes.modifierExtension" /> <short value="Extensions that cannot be ignored even if unrecognized" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself)." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <requirements value="Modifier extensions allow for extensions that *cannot* be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the [definition of modifier extensions](extensibility.html#modifierExtension)." /> <alias value="extensions" /> <alias value="user content" /> <alias value="modifiers" /> <min value="0" /> <max value="*" /> <base> <path value="BackboneElement.modifierExtension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <isModifier value="true" /> <isModifierReason value="Modifier extensions are expected to modify the meaning or interpretation of the element that contains them" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Geraet.nameDesGeraetes.name"> <path value="Geraet.nameDesGeraetes.name" /> <label value="Name" /> <short value="Name" /> <definition value="Hier wird der konkrete Name des Gerätes angegeben." /> <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" /> <alias value="Gerät / Name des Gerätes / Name" /> <min value="1" /> <max value="1" /> <base> <path value="Geraet.nameDesGeraetes.name" /> <min value="1" /> <max value="1" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Geraet.nameDesGeraetes.typ"> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status"> <valueCode value="normative" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version"> <valueCode value="4.0.0" /> </extension> <path value="Geraet.nameDesGeraetes.typ" /> <label value="Typ" /> <short value="Typ" /> <definition value="Hier wird angegeben, um welche Art von Namen für das Gerät es sich handelt." /> <comment value="Codes may be defined very casually in enumerations or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information." /> <alias value="Gerät / Name des Gerätes / Typ" /> <min value="1" /> <max value="1" /> <base> <path value="Geraet.nameDesGeraetes.typ" /> <min value="1" /> <max value="1" /> </base> <type> <code value="Coding" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <binding> <strength value="required" /> <valueSet value="http://hl7.org/fhir/ValueSet/device-nametype" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CE/CNE/CWE subset one of the sets of component 1-3 or 4-6" /> </mapping> <mapping> <identity value="rim" /> <map value="CV" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:Coding rdfs:subClassOf dt:CDCoding" /> </mapping> </element> <element id="Geraet.udi"> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status"> <valueCode value="normative" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version"> <valueCode value="4.0.0" /> </extension> <path value="Geraet.udi" /> <label value="UDI" /> <short value="UDI" /> <definition value="Das Akronym *UDI* steht für *Unique Device Identification* und beschreibt ein Identifikationssystem mit eigenen Kennzahlen für jedes Medizinprodukt, was die Rückverfolgbarkeit des Produkts weltweit gewährleistet. Mit der *Medical Device Regulation* (*MDR*) zum 26\. Mai 2020 wurde das System für alle Medizinprodukte inkl. In\-vitro\-Diagnostika verpflichtend (Ausnahmen Sonderanfertigungen). Für die letztendliche Anbringung am Produkt (UDI\-Träger) selbst gibt es, gestuft nach Produktklassen, Fristen im Zeitraum 2021 bis 2025\.Voraussetzung für die Umsetzung und Erstellung der UDI ist die Registrierung bei einer der Zuteilungsstellen (aktuell: GS1, IFA, HIBCC, ICCBBA). Die UDI\-Identifikation beinhaltet zwei Teile: * *UDI\-DI*: Device Identifier (DI) * *UDI\-PI*: Production Identifier (PI)" /> <alias value="Gerät / UDI" /> <min value="0" /> <max value="1" /> <base> <path value="Geraet.udi" /> <min value="0" /> <max value="1" /> </base> <type> <code value="BackboneElement" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Geraet.udi.id"> <path value="Geraet.udi.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Geraet.udi.extension"> <path value="Geraet.udi.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Geraet.udi.modifierExtension"> <path value="Geraet.udi.modifierExtension" /> <short value="Extensions that cannot be ignored even if unrecognized" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself)." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <requirements value="Modifier extensions allow for extensions that *cannot* be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the [definition of modifier extensions](extensibility.html#modifierExtension)." /> <alias value="extensions" /> <alias value="user content" /> <alias value="modifiers" /> <min value="0" /> <max value="*" /> <base> <path value="BackboneElement.modifierExtension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <isModifier value="true" /> <isModifierReason value="Modifier extensions are expected to modify the meaning or interpretation of the element that contains them" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Geraet.udi.udiDi"> <path value="Geraet.udi.udiDi" /> <label value="UDI-DI" /> <short value="UDI-DI" /> <definition value="*UDI\-DI* ist der "Device Identifier". Es ist der statische Teil der UDI. Er enthält die Kennung der gewählten Zuteilungsstelle, die Kennung des Herstellers/Etikettierers, den Referenzcode des Produkts und kann auch eine Kennzeichnung für eine bestimmte Verpackungsebene enthalten." /> <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" /> <alias value="Gerät / UDI / UDI-DI" /> <min value="0" /> <max value="1" /> <base> <path value="Geraet.udi.udiDi" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Geraet.udi.udiPi"> <path value="Geraet.udi.udiPi" /> <label value="UDI-PI" /> <short value="UDI-PI" /> <definition value="*UDI\-PI* ist der "Production Identifier". Es ist der dynamische Teil der Kennung. Er enthält Angaben zum Verfallsdatum, zu Losnummer und \-größe (LOT), Seriennummer (SN) und zuweilen auch Angaben zum Herstellungsdatum. Es hängt vom jeweiligen Produkt oder von der Produktgruppe ab, welche Elemente genau vorkommen müssen." /> <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" /> <alias value="Gerät / UDI / UDI-PI" /> <min value="0" /> <max value="1" /> <base> <path value="Geraet.udi.udiPi" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Geraet.produktnummern"> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status"> <valueCode value="normative" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version"> <valueCode value="4.0.0" /> </extension> <path value="Geraet.produktnummern" /> <label value="Produktnummern" /> <short value="Produktnummern" /> <definition value="Hier werden verschiedene Produktnummern zum Gerät angegeben." /> <alias value="Gerät / Produktnummern" /> <min value="0" /> <max value="*" /> <base> <path value="Geraet.produktnummern" /> <min value="0" /> <max value="*" /> </base> <type> <code value="BackboneElement" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Geraet.produktnummern.id"> <path value="Geraet.produktnummern.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Geraet.produktnummern.extension"> <path value="Geraet.produktnummern.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Geraet.produktnummern.modifierExtension"> <path value="Geraet.produktnummern.modifierExtension" /> <short value="Extensions that cannot be ignored even if unrecognized" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself)." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <requirements value="Modifier extensions allow for extensions that *cannot* be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the [definition of modifier extensions](extensibility.html#modifierExtension)." /> <alias value="extensions" /> <alias value="user content" /> <alias value="modifiers" /> <min value="0" /> <max value="*" /> <base> <path value="BackboneElement.modifierExtension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <isModifier value="true" /> <isModifierReason value="Modifier extensions are expected to modify the meaning or interpretation of the element that contains them" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Geraet.produktnummern.modellnummer"> <path value="Geraet.produktnummern.modellnummer" /> <label value="Modellnummer" /> <short value="Modellnummer" /> <definition value="Modellnummer des Geräts." /> <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" /> <alias value="Gerät / Produktnummern / Modellnummer" /> <min value="0" /> <max value="1" /> <base> <path value="Geraet.produktnummern.modellnummer" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Geraet.produktnummern.seriennummer"> <path value="Geraet.produktnummern.seriennummer" /> <label value="Seriennummer" /> <short value="Seriennummer" /> <definition value="Seriennummer des Geräts." /> <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" /> <alias value="Gerät / Produktnummern / Seriennummer" /> <min value="0" /> <max value="1" /> <base> <path value="Geraet.produktnummern.seriennummer" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Geraet.produktnummern.chargennummer"> <path value="Geraet.produktnummern.chargennummer" /> <label value="Chargennummer" /> <short value="Chargennummer" /> <definition value="Chargennummer des Geräts." /> <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" /> <alias value="Gerät / Produktnummern / Chargennummer" /> <min value="0" /> <max value="1" /> <base> <path value="Geraet.produktnummern.chargennummer" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Geraet.produktnummern.andereProduktnummer"> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status"> <valueCode value="normative" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version"> <valueCode value="4.0.0" /> </extension> <path value="Geraet.produktnummern.andereProduktnummer" /> <label value="Andere Produktnummer" /> <short value="Andere Produktnummer" /> <definition value="Angabe weiterer eineindeutiger Produktnummern. Diese sollen allerdings einen Identifier darstellen und damit eineindeutig (Bijektiv) sein." /> <alias value="Gerät / Produktnummern / Andere Produktnummer" /> <min value="0" /> <max value="*" /> <base> <path value="Geraet.produktnummern.andereProduktnummer" /> <min value="0" /> <max value="*" /> </base> <type> <code value="BackboneElement" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Geraet.produktnummern.andereProduktnummer.id"> <path value="Geraet.produktnummern.andereProduktnummer.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Geraet.produktnummern.andereProduktnummer.extension"> <path value="Geraet.produktnummern.andereProduktnummer.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Geraet.produktnummern.andereProduktnummer.modifierExtension"> <path value="Geraet.produktnummern.andereProduktnummer.modifierExtension" /> <short value="Extensions that cannot be ignored even if unrecognized" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself)." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <requirements value="Modifier extensions allow for extensions that *cannot* be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the [definition of modifier extensions](extensibility.html#modifierExtension)." /> <alias value="extensions" /> <alias value="user content" /> <alias value="modifiers" /> <min value="0" /> <max value="*" /> <base> <path value="BackboneElement.modifierExtension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <isModifier value="true" /> <isModifierReason value="Modifier extensions are expected to modify the meaning or interpretation of the element that contains them" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Geraet.produktnummern.andereProduktnummer.produktnummer"> <path value="Geraet.produktnummern.andereProduktnummer.produktnummer" /> <label value="Produktnummer" /> <short value="Produktnummer" /> <definition value="Hier wird die entsprechende Produktnummer selbst eingegeben." /> <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" /> <alias value="Gerät / Produktnummern / Andere Produktnummer / Produktnummer" /> <min value="0" /> <max value="1" /> <base> <path value="Geraet.produktnummern.andereProduktnummer.produktnummer" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Geraet.produktnummern.andereProduktnummer.bezeichnungDerProduktnummer"> <path value="Geraet.produktnummern.andereProduktnummer.bezeichnungDerProduktnummer" /> <label value="Bezeichnung der Produktnummer" /> <short value="Bezeichnung der Produktnummer" /> <definition value="Hier wird eine Bezeichnung für die Produktnummer angegeben." /> <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" /> <alias value="Gerät / Produktnummern / Andere Produktnummer / Bezeichnung der Produktnummer" /> <min value="0" /> <max value="1" /> <base> <path value="Geraet.produktnummern.andereProduktnummer.bezeichnungDerProduktnummer" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Geraet.hersteller"> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status"> <valueCode value="normative" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version"> <valueCode value="4.0.0" /> </extension> <path value="Geraet.hersteller" /> <label value="Hersteller" /> <short value="Hersteller" /> <definition value="Hier werden Angaben zum Hersteller des Gerätes referenziert." /> <alias value="Gerät / Hersteller" /> <min value="0" /> <max value="1" /> <base> <path value="Geraet.hersteller" /> <min value="0" /> <max value="1" /> </base> <type> <code value="BackboneElement" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Geraet.hersteller.id"> <path value="Geraet.hersteller.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Geraet.hersteller.extension"> <path value="Geraet.hersteller.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Geraet.hersteller.modifierExtension"> <path value="Geraet.hersteller.modifierExtension" /> <short value="Extensions that cannot be ignored even if unrecognized" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself)." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <requirements value="Modifier extensions allow for extensions that *cannot* be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the [definition of modifier extensions](extensibility.html#modifierExtension)." /> <alias value="extensions" /> <alias value="user content" /> <alias value="modifiers" /> <min value="0" /> <max value="*" /> <base> <path value="BackboneElement.modifierExtension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <isModifier value="true" /> <isModifierReason value="Modifier extensions are expected to modify the meaning or interpretation of the element that contains them" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Geraet.hersteller.referenz"> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status"> <valueCode value="normative" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version"> <valueCode value="4.0.0" /> </extension> <path value="Geraet.hersteller.referenz" /> <label value="Referenz" /> <short value="Referenz" /> <definition value="Hier wird der Hersteller referenziert, was in diesem Fall einer FHIR®\-Organization entspricht." /> <alias value="Gerät / Hersteller / Referenz" /> <min value="0" /> <max value="1" /> <base> <path value="Geraet.hersteller.referenz" /> <min value="0" /> <max value="1" /> </base> <type> <code value="BackboneElement" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Geraet.herstellungsdatum"> <path value="Geraet.herstellungsdatum" /> <label value="Herstellungsdatum" /> <short value="Herstellungsdatum" /> <definition value="Datum, an dem das Gerät hergestellt wurde." /> <alias value="Gerät / Herstellungsdatum" /> <min value="0" /> <max value="1" /> <base> <path value="Geraet.herstellungsdatum" /> <min value="0" /> <max value="1" /> </base> <type> <code value="dateTime" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Geraet.haltbarkeitsdatum"> <path value="Geraet.haltbarkeitsdatum" /> <label value="Haltbarkeitsdatum" /> <short value="Haltbarkeitsdatum" /> <definition value="Hier wird angegeben, bis wann das Gerät verwendet werden kann." /> <alias value="Gerät / Haltbarkeitsdatum" /> <min value="0" /> <max value="1" /> <base> <path value="Geraet.haltbarkeitsdatum" /> <min value="0" /> <max value="1" /> </base> <type> <code value="dateTime" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Geraet.version"> <path value="Geraet.version" /> <label value="Version" /> <short value="Version" /> <definition value="Hier wird eine Version angeben, z. B. Version der Software, mit der das Gerät verwendet wird, oder Version der Hardware." /> <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" /> <alias value="Gerät / Version" /> <min value="0" /> <max value="*" /> <base> <path value="Geraet.version" /> <min value="0" /> <max value="*" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Geraet.status"> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status"> <valueCode value="normative" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version"> <valueCode value="4.0.0" /> </extension> <path value="Geraet.status" /> <label value="Status" /> <short value="Status" /> <definition value="Hier wird der gegenwärtige Status des Geräts angegeben." /> <comment value="Codes may be defined very casually in enumerations or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information." /> <alias value="Gerät / Status" /> <min value="0" /> <max value="1" /> <base> <path value="Geraet.status" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Coding" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <binding> <strength value="required" /> <valueSet value="http://hl7.org/fhir/ValueSet/device-status" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CE/CNE/CWE subset one of the sets of component 1-3 or 4-6" /> </mapping> <mapping> <identity value="rim" /> <map value="CV" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:Coding rdfs:subClassOf dt:CDCoding" /> </mapping> </element> <element id="Geraet.statusgrund"> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status"> <valueCode value="normative" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version"> <valueCode value="4.0.0" /> </extension> <path value="Geraet.statusgrund" /> <label value="Statusgrund" /> <short value="Statusgrund" /> <definition value="Hier wird der Grund für den gegenwärtigen Status des Geräts angegeben." /> <comment value="Codes may be defined very casually in enumerations or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information." /> <alias value="Gerät / Statusgrund" /> <min value="0" /> <max value="1" /> <base> <path value="Geraet.statusgrund" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Coding" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <binding> <strength value="extensible" /> <valueSet value="http://hl7.org/fhir/ValueSet/device-status-reason" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CE/CNE/CWE subset one of the sets of component 1-3 or 4-6" /> </mapping> <mapping> <identity value="rim" /> <map value="CV" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:Coding rdfs:subClassOf dt:CDCoding" /> </mapping> </element> <element id="Geraet.verantwortlichePersonEinrichtung"> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status"> <valueCode value="normative" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version"> <valueCode value="4.0.0" /> </extension> <path value="Geraet.verantwortlichePersonEinrichtung" /> <label value="Verantwortliche Person/Einrichtung" /> <short value="Verantwortliche Person/Einrichtung" /> <definition value="Hier wird die behandelnde Person/Einrichtung angegeben die für das Monitoring des Gerätes verantwortlich ist." /> <alias value="Gerät / Verantwortliche Person/Einrichtung" /> <min value="0" /> <max value="1" /> <base> <path value="Geraet.verantwortlichePersonEinrichtung" /> <min value="0" /> <max value="1" /> </base> <type> <code value="BackboneElement" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Geraet.verantwortlichePersonEinrichtung.id"> <path value="Geraet.verantwortlichePersonEinrichtung.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Geraet.verantwortlichePersonEinrichtung.extension"> <path value="Geraet.verantwortlichePersonEinrichtung.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Geraet.verantwortlichePersonEinrichtung.modifierExtension"> <path value="Geraet.verantwortlichePersonEinrichtung.modifierExtension" /> <short value="Extensions that cannot be ignored even if unrecognized" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself)." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <requirements value="Modifier extensions allow for extensions that *cannot* be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the [definition of modifier extensions](extensibility.html#modifierExtension)." /> <alias value="extensions" /> <alias value="user content" /> <alias value="modifiers" /> <min value="0" /> <max value="*" /> <base> <path value="BackboneElement.modifierExtension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <isModifier value="true" /> <isModifierReason value="Modifier extensions are expected to modify the meaning or interpretation of the element that contains them" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Geraet.verantwortlichePersonEinrichtung.referenz"> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status"> <valueCode value="normative" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version"> <valueCode value="4.0.0" /> </extension> <path value="Geraet.verantwortlichePersonEinrichtung.referenz" /> <label value="Referenz" /> <short value="Referenz" /> <definition value="Hier wird die verantwortliche Person bzw. Einrichtung referenziert." /> <alias value="Gerät / Verantwortliche Person/Einrichtung / Referenz" /> <min value="1" /> <max value="1" /> <base> <path value="Geraet.verantwortlichePersonEinrichtung.referenz" /> <min value="1" /> <max value="1" /> </base> <type> <code value="BackboneElement" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Geraet.notiz"> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status"> <valueCode value="normative" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version"> <valueCode value="4.0.0" /> </extension> <path value="Geraet.notiz" /> <label value="Notiz" /> <short value="Notiz" /> <definition value="Hier werden ergänzende freitextliche Kommentare und Notizen vorgenommen, die nicht durch die strukturierten Datenelemente erfassbar sind." /> <alias value="Gerät / Notiz" /> <min value="0" /> <max value="*" /> <base> <path value="Geraet.notiz" /> <min value="0" /> <max value="*" /> </base> <type> <code value="BackboneElement" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Geraet.notiz.id"> <path value="Geraet.notiz.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Geraet.notiz.extension"> <path value="Geraet.notiz.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Geraet.notiz.modifierExtension"> <path value="Geraet.notiz.modifierExtension" /> <short value="Extensions that cannot be ignored even if unrecognized" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself)." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <requirements value="Modifier extensions allow for extensions that *cannot* be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the [definition of modifier extensions](extensibility.html#modifierExtension)." /> <alias value="extensions" /> <alias value="user content" /> <alias value="modifiers" /> <min value="0" /> <max value="*" /> <base> <path value="BackboneElement.modifierExtension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <isModifier value="true" /> <isModifierReason value="Modifier extensions are expected to modify the meaning or interpretation of the element that contains them" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Geraet.notiz.autorIn"> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status"> <valueCode value="normative" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version"> <valueCode value="4.0.0" /> </extension> <path value="Geraet.notiz.autorIn" /> <label value="Autor:in" /> <short value="Autor:in" /> <definition value="Hier wird die Person angegeben, die die Notiz erstellt hat." /> <comment value="**Operationalisierungshinweise** Für erstellende Systeme: Dieses Element sollte in der Regel automatisiert befüllt werden, z.B. auf Basis des Benutzermanagements des Primärsystems." /> <alias value="Gerät / Notiz / Autor:in" /> <min value="0" /> <max value="1" /> <base> <path value="Geraet.notiz.autorIn" /> <min value="0" /> <max value="1" /> </base> <type> <code value="BackboneElement" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Geraet.notiz.autorIn.id"> <path value="Geraet.notiz.autorIn.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Geraet.notiz.autorIn.extension"> <path value="Geraet.notiz.autorIn.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Geraet.notiz.autorIn.modifierExtension"> <path value="Geraet.notiz.autorIn.modifierExtension" /> <short value="Extensions that cannot be ignored even if unrecognized" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself)." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <requirements value="Modifier extensions allow for extensions that *cannot* be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the [definition of modifier extensions](extensibility.html#modifierExtension)." /> <alias value="extensions" /> <alias value="user content" /> <alias value="modifiers" /> <min value="0" /> <max value="*" /> <base> <path value="BackboneElement.modifierExtension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <isModifier value="true" /> <isModifierReason value="Modifier extensions are expected to modify the meaning or interpretation of the element that contains them" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Geraet.notiz.autorIn.referenz"> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status"> <valueCode value="normative" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version"> <valueCode value="4.0.0" /> </extension> <path value="Geraet.notiz.autorIn.referenz" /> <label value="Referenz" /> <short value="Referenz" /> <definition value="Hier wird die Person, die die Notiz erstellt hat, referenziert." /> <alias value="Gerät / Notiz / Autor:in / Referenz" /> <min value="0" /> <max value="1" /> <base> <path value="Geraet.notiz.autorIn.referenz" /> <min value="0" /> <max value="1" /> </base> <type> <code value="BackboneElement" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Geraet.notiz.autorIn.freitext"> <path value="Geraet.notiz.autorIn.freitext" /> <label value="Freitext" /> <short value="Freitext" /> <definition value="Hier wird die Person, die die Notiz erstellt hat, als Freitext angegeben." /> <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" /> <alias value="Gerät / Notiz / Autor:in / Freitext" /> <min value="0" /> <max value="1" /> <base> <path value="Geraet.notiz.autorIn.freitext" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Geraet.notiz.zeitpunktDerErstellung"> <path value="Geraet.notiz.zeitpunktDerErstellung" /> <label value="Zeitpunkt der Erstellung" /> <short value="Zeitpunkt der Erstellung" /> <definition value="Hier wird der Zeitpunkt angegeben, zu dem die Notiz erstellt wurde." /> <alias value="Gerät / Notiz / Zeitpunkt der Erstellung" /> <min value="0" /> <max value="1" /> <base> <path value="Geraet.notiz.zeitpunktDerErstellung" /> <min value="0" /> <max value="1" /> </base> <type> <code value="dateTime" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Geraet.notiz.text"> <path value="Geraet.notiz.text" /> <label value="Text" /> <short value="Text" /> <definition value="Hier wird der eigentliche Text der Notiz eingetragen." /> <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" /> <alias value="Gerät / Notiz / Text" /> <min value="1" /> <max value="1" /> <base> <path value="Geraet.notiz.text" /> <min value="1" /> <max value="1" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> </snapshot> <differential> <element id="Geraet"> <path value="Geraet" /> <short value="Gerät" /> <definition value="In diesem Element werden Informationen zu einem Gerät bzw. Medizinprodukt angegeben." /> <alias value="Gerät" /> </element> <element id="Geraet.kategorieCodeBezeichnung"> <path value="Geraet.kategorieCodeBezeichnung" /> <label value="Kategorie - Code/Bezeichnung" /> <short value="Kategorie - Code/Bezeichnung" /> <definition value="Hier wird eine übergeordnete Kategorie für die Art des Geräts angegeben, z. B. Medizinprodukt, Implantat, Laborgerät." /> <alias value="Gerät / Kategorie - Code/Bezeichnung" /> <min value="0" /> <max value="1" /> <type> <code value="BackboneElement" /> </type> </element> <element id="Geraet.kategorieCodeBezeichnung.codeAuswahl"> <path value="Geraet.kategorieCodeBezeichnung.codeAuswahl" /> <label value="Code-Auswahl" /> <short value="Code-Auswahl" /> <definition value="Hier werden Codes angegeben." /> <alias value="Gerät / Kategorie - Code/Bezeichnung / Code-Auswahl" /> <min value="0" /> <max value="*" /> <type> <code value="BackboneElement" /> </type> </element> <element id="Geraet.kategorieCodeBezeichnung.codeAuswahl.deviceTypes"> <path value="Geraet.kategorieCodeBezeichnung.codeAuswahl.deviceTypes" /> <label value="Device Types" /> <short value="Device Types" /> <definition value="Hier wird ein Code erfasst, welcher angibt um welchen Gerätetyp es sich handelt." /> <alias value="Gerät / Kategorie - Code/Bezeichnung / Code-Auswahl / Device Types" /> <min value="0" /> <max value="*" /> <type> <code value="Coding" /> </type> <binding> <strength value="example" /> <valueSet value="http://hl7.org/fhir/ValueSet/device-type" /> </binding> </element> <element id="Geraet.kategorieCodeBezeichnung.codeAuswahl.codeAusEinemAnderenCodeSystem"> <path value="Geraet.kategorieCodeBezeichnung.codeAuswahl.codeAusEinemAnderenCodeSystem" /> <label value="Code aus einem anderen Code-System" /> <short value="Code aus einem anderen Code-System" /> <definition value="Hier wird die Kategorie als Code eingetragen, vorzugsweise aus dem Code\-System SNOMED CT® beziehungsweise LOINC®." /> <comment value="**Operationalisierungshinweise** Hier sollte zusätzlich zum Code auch das Code\-System, die Version des Code\-Systems und der Anzeigename (Display Name) übermittelt werden." /> <alias value="Gerät / Kategorie - Code/Bezeichnung / Code-Auswahl / Code aus einem anderen Code-System" /> <min value="0" /> <max value="*" /> <type> <code value="Coding" /> </type> </element> <element id="Geraet.kategorieCodeBezeichnung.bezeichnung"> <path value="Geraet.kategorieCodeBezeichnung.bezeichnung" /> <label value="Bezeichnung" /> <short value="Bezeichnung" /> <definition value="Dieses Element enthält eine freitextliche Bezeichnung der Kategorie des Geräts." /> <alias value="Gerät / Kategorie - Code/Bezeichnung / Bezeichnung" /> <min value="0" /> <max value="1" /> <type> <code value="string" /> </type> </element> <element id="Geraet.spezifischerTypCodeBezeichnung"> <path value="Geraet.spezifischerTypCodeBezeichnung" /> <label value="Spezifischer Typ - Code/Bezeichnung" /> <short value="Spezifischer Typ - Code/Bezeichnung" /> <definition value="Diese Gruppe enthält die Bezeichnung des Produkts als Code oder als Freitexteintrag. Falls ein Code vorhanden ist, soll der Displayname des Codes in das Feld Freitextbezeichnung übernommen werden. Falls kein Code angegeben wird, muss ein Freitext angegeben werden." /> <alias value="Gerät / Spezifischer Typ - Code/Bezeichnung" /> <min value="1" /> <max value="1" /> <type> <code value="BackboneElement" /> </type> </element> <element id="Geraet.spezifischerTypCodeBezeichnung.codeAuswahl"> <path value="Geraet.spezifischerTypCodeBezeichnung.codeAuswahl" /> <label value="Code-Auswahl" /> <short value="Code-Auswahl" /> <definition value="Hier wird der spezifische Gerätetyp in Form eines Codes angegeben." /> <alias value="Gerät / Spezifischer Typ - Code/Bezeichnung / Code-Auswahl" /> <min value="0" /> <max value="*" /> <type> <code value="BackboneElement" /> </type> </element> <element id="Geraet.spezifischerTypCodeBezeichnung.codeAuswahl.snomedCtCode"> <path value="Geraet.spezifischerTypCodeBezeichnung.codeAuswahl.snomedCtCode" /> <label value="SNOMED CT®-Code" /> <short value="SNOMED CT®-Code" /> <definition value="Hier wird ein Code aus SNOMED CT®\-Code angegeben. Beispiel: Cardiac pacemaker, device (physical object), SCTID: 14106009" /> <alias value="Gerät / Spezifischer Typ - Code/Bezeichnung / Code-Auswahl / SNOMED CT®-Code" /> <min value="0" /> <max value="*" /> <type> <code value="Coding" /> </type> <binding> <strength value="required" /> <valueSet value="https://fhir.kbv.de/ValueSet/KBV_VS_Base_Device_SNOMED_CT" /> </binding> </element> <element id="Geraet.spezifischerTypCodeBezeichnung.codeAuswahl.codeAusEinemAnderenCodeSystem"> <path value="Geraet.spezifischerTypCodeBezeichnung.codeAuswahl.codeAusEinemAnderenCodeSystem" /> <label value="Code aus einem anderen Code-System" /> <short value="Code aus einem anderen Code-System" /> <definition value="Code für die Bezeichnung des Gerätes nach einer frei wählbaren Terminologie." /> <comment value="**Operationalisierungshinweise** Aus technischen Gründen kann dieses Element nicht direkt in FHIR® abgebildet werden. Bei einer Ableitung von diesem Profil können aber beliebige weitere Code\-Systeme hinzugefügt werden (offenes Slicing). Hierbei sollte zusätzlich zum Code auch das Code\-System, die Version des Code\-Systems und der Anzeigename (Display Name) übermittelt werden." /> <alias value="Gerät / Spezifischer Typ - Code/Bezeichnung / Code-Auswahl / Code aus einem anderen Code-System" /> <min value="0" /> <max value="*" /> <type> <code value="Coding" /> </type> </element> <element id="Geraet.spezifischerTypCodeBezeichnung.bezeichnung"> <path value="Geraet.spezifischerTypCodeBezeichnung.bezeichnung" /> <label value="Bezeichnung" /> <short value="Bezeichnung" /> <definition value="Dieses Element enthält eine freitextliche Bezeichnung der Art des Geräts, z. B. "Oberarm\-Blutdruckmessgerät" oder "DDD\-Schrittmacher"." /> <alias value="Gerät / Spezifischer Typ - Code/Bezeichnung / Bezeichnung" /> <min value="0" /> <max value="1" /> <type> <code value="string" /> </type> </element> <element id="Geraet.nameDesGeraetes"> <path value="Geraet.nameDesGeraetes" /> <label value="Name des Gerätes" /> <short value="Name des Gerätes" /> <definition value="Hier wird der konkrete Name (z.B. der Modellname) des betreffenden Gerätes angegeben." /> <alias value="Gerät / Name des Gerätes" /> <min value="0" /> <max value="*" /> <type> <code value="BackboneElement" /> </type> </element> <element id="Geraet.nameDesGeraetes.name"> <path value="Geraet.nameDesGeraetes.name" /> <label value="Name" /> <short value="Name" /> <definition value="Hier wird der konkrete Name des Gerätes angegeben." /> <alias value="Gerät / Name des Gerätes / Name" /> <min value="1" /> <max value="1" /> <type> <code value="string" /> </type> </element> <element id="Geraet.nameDesGeraetes.typ"> <path value="Geraet.nameDesGeraetes.typ" /> <label value="Typ" /> <short value="Typ" /> <definition value="Hier wird angegeben, um welche Art von Namen für das Gerät es sich handelt." /> <alias value="Gerät / Name des Gerätes / Typ" /> <min value="1" /> <max value="1" /> <type> <code value="Coding" /> </type> <binding> <strength value="required" /> <valueSet value="http://hl7.org/fhir/ValueSet/device-nametype" /> </binding> </element> <element id="Geraet.udi"> <path value="Geraet.udi" /> <label value="UDI" /> <short value="UDI" /> <definition value="Das Akronym *UDI* steht für *Unique Device Identification* und beschreibt ein Identifikationssystem mit eigenen Kennzahlen für jedes Medizinprodukt, was die Rückverfolgbarkeit des Produkts weltweit gewährleistet. Mit der *Medical Device Regulation* (*MDR*) zum 26\. Mai 2020 wurde das System für alle Medizinprodukte inkl. In\-vitro\-Diagnostika verpflichtend (Ausnahmen Sonderanfertigungen). Für die letztendliche Anbringung am Produkt (UDI\-Träger) selbst gibt es, gestuft nach Produktklassen, Fristen im Zeitraum 2021 bis 2025\.Voraussetzung für die Umsetzung und Erstellung der UDI ist die Registrierung bei einer der Zuteilungsstellen (aktuell: GS1, IFA, HIBCC, ICCBBA). Die UDI\-Identifikation beinhaltet zwei Teile: * *UDI\-DI*: Device Identifier (DI) * *UDI\-PI*: Production Identifier (PI)" /> <alias value="Gerät / UDI" /> <min value="0" /> <max value="1" /> <type> <code value="BackboneElement" /> </type> </element> <element id="Geraet.udi.udiDi"> <path value="Geraet.udi.udiDi" /> <label value="UDI-DI" /> <short value="UDI-DI" /> <definition value="*UDI\-DI* ist der "Device Identifier". Es ist der statische Teil der UDI. Er enthält die Kennung der gewählten Zuteilungsstelle, die Kennung des Herstellers/Etikettierers, den Referenzcode des Produkts und kann auch eine Kennzeichnung für eine bestimmte Verpackungsebene enthalten." /> <alias value="Gerät / UDI / UDI-DI" /> <min value="0" /> <max value="1" /> <type> <code value="string" /> </type> </element> <element id="Geraet.udi.udiPi"> <path value="Geraet.udi.udiPi" /> <label value="UDI-PI" /> <short value="UDI-PI" /> <definition value="*UDI\-PI* ist der "Production Identifier". Es ist der dynamische Teil der Kennung. Er enthält Angaben zum Verfallsdatum, zu Losnummer und \-größe (LOT), Seriennummer (SN) und zuweilen auch Angaben zum Herstellungsdatum. Es hängt vom jeweiligen Produkt oder von der Produktgruppe ab, welche Elemente genau vorkommen müssen." /> <alias value="Gerät / UDI / UDI-PI" /> <min value="0" /> <max value="1" /> <type> <code value="string" /> </type> </element> <element id="Geraet.produktnummern"> <path value="Geraet.produktnummern" /> <label value="Produktnummern" /> <short value="Produktnummern" /> <definition value="Hier werden verschiedene Produktnummern zum Gerät angegeben." /> <alias value="Gerät / Produktnummern" /> <min value="0" /> <max value="*" /> <type> <code value="BackboneElement" /> </type> </element> <element id="Geraet.produktnummern.modellnummer"> <path value="Geraet.produktnummern.modellnummer" /> <label value="Modellnummer" /> <short value="Modellnummer" /> <definition value="Modellnummer des Geräts." /> <alias value="Gerät / Produktnummern / Modellnummer" /> <min value="0" /> <max value="1" /> <type> <code value="string" /> </type> </element> <element id="Geraet.produktnummern.seriennummer"> <path value="Geraet.produktnummern.seriennummer" /> <label value="Seriennummer" /> <short value="Seriennummer" /> <definition value="Seriennummer des Geräts." /> <alias value="Gerät / Produktnummern / Seriennummer" /> <min value="0" /> <max value="1" /> <type> <code value="string" /> </type> </element> <element id="Geraet.produktnummern.chargennummer"> <path value="Geraet.produktnummern.chargennummer" /> <label value="Chargennummer" /> <short value="Chargennummer" /> <definition value="Chargennummer des Geräts." /> <alias value="Gerät / Produktnummern / Chargennummer" /> <min value="0" /> <max value="1" /> <type> <code value="string" /> </type> </element> <element id="Geraet.produktnummern.andereProduktnummer"> <path value="Geraet.produktnummern.andereProduktnummer" /> <label value="Andere Produktnummer" /> <short value="Andere Produktnummer" /> <definition value="Angabe weiterer eineindeutiger Produktnummern. Diese sollen allerdings einen Identifier darstellen und damit eineindeutig (Bijektiv) sein." /> <alias value="Gerät / Produktnummern / Andere Produktnummer" /> <min value="0" /> <max value="*" /> <type> <code value="BackboneElement" /> </type> </element> <element id="Geraet.produktnummern.andereProduktnummer.produktnummer"> <path value="Geraet.produktnummern.andereProduktnummer.produktnummer" /> <label value="Produktnummer" /> <short value="Produktnummer" /> <definition value="Hier wird die entsprechende Produktnummer selbst eingegeben." /> <alias value="Gerät / Produktnummern / Andere Produktnummer / Produktnummer" /> <min value="0" /> <max value="1" /> <type> <code value="string" /> </type> </element> <element id="Geraet.produktnummern.andereProduktnummer.bezeichnungDerProduktnummer"> <path value="Geraet.produktnummern.andereProduktnummer.bezeichnungDerProduktnummer" /> <label value="Bezeichnung der Produktnummer" /> <short value="Bezeichnung der Produktnummer" /> <definition value="Hier wird eine Bezeichnung für die Produktnummer angegeben." /> <alias value="Gerät / Produktnummern / Andere Produktnummer / Bezeichnung der Produktnummer" /> <min value="0" /> <max value="1" /> <type> <code value="string" /> </type> </element> <element id="Geraet.hersteller"> <path value="Geraet.hersteller" /> <label value="Hersteller" /> <short value="Hersteller" /> <definition value="Hier werden Angaben zum Hersteller des Gerätes referenziert." /> <alias value="Gerät / Hersteller" /> <min value="0" /> <max value="1" /> <type> <code value="BackboneElement" /> </type> </element> <element id="Geraet.hersteller.referenz"> <path value="Geraet.hersteller.referenz" /> <label value="Referenz" /> <short value="Referenz" /> <definition value="Hier wird der Hersteller referenziert, was in diesem Fall einer FHIR®\-Organization entspricht." /> <alias value="Gerät / Hersteller / Referenz" /> <min value="0" /> <max value="1" /> <type> <code value="BackboneElement" /> </type> </element> <element id="Geraet.herstellungsdatum"> <path value="Geraet.herstellungsdatum" /> <label value="Herstellungsdatum" /> <short value="Herstellungsdatum" /> <definition value="Datum, an dem das Gerät hergestellt wurde." /> <alias value="Gerät / Herstellungsdatum" /> <min value="0" /> <max value="1" /> <type> <code value="dateTime" /> </type> </element> <element id="Geraet.haltbarkeitsdatum"> <path value="Geraet.haltbarkeitsdatum" /> <label value="Haltbarkeitsdatum" /> <short value="Haltbarkeitsdatum" /> <definition value="Hier wird angegeben, bis wann das Gerät verwendet werden kann." /> <alias value="Gerät / Haltbarkeitsdatum" /> <min value="0" /> <max value="1" /> <type> <code value="dateTime" /> </type> </element> <element id="Geraet.version"> <path value="Geraet.version" /> <label value="Version" /> <short value="Version" /> <definition value="Hier wird eine Version angeben, z. B. Version der Software, mit der das Gerät verwendet wird, oder Version der Hardware." /> <alias value="Gerät / Version" /> <min value="0" /> <max value="*" /> <type> <code value="string" /> </type> </element> <element id="Geraet.status"> <path value="Geraet.status" /> <label value="Status" /> <short value="Status" /> <definition value="Hier wird der gegenwärtige Status des Geräts angegeben." /> <alias value="Gerät / Status" /> <min value="0" /> <max value="1" /> <type> <code value="Coding" /> </type> <binding> <strength value="required" /> <valueSet value="http://hl7.org/fhir/ValueSet/device-status" /> </binding> </element> <element id="Geraet.statusgrund"> <path value="Geraet.statusgrund" /> <label value="Statusgrund" /> <short value="Statusgrund" /> <definition value="Hier wird der Grund für den gegenwärtigen Status des Geräts angegeben." /> <alias value="Gerät / Statusgrund" /> <min value="0" /> <max value="1" /> <type> <code value="Coding" /> </type> <binding> <strength value="extensible" /> <valueSet value="http://hl7.org/fhir/ValueSet/device-status-reason" /> </binding> </element> <element id="Geraet.verantwortlichePersonEinrichtung"> <path value="Geraet.verantwortlichePersonEinrichtung" /> <label value="Verantwortliche Person/Einrichtung" /> <short value="Verantwortliche Person/Einrichtung" /> <definition value="Hier wird die behandelnde Person/Einrichtung angegeben die für das Monitoring des Gerätes verantwortlich ist." /> <alias value="Gerät / Verantwortliche Person/Einrichtung" /> <min value="0" /> <max value="1" /> <type> <code value="BackboneElement" /> </type> </element> <element id="Geraet.verantwortlichePersonEinrichtung.referenz"> <path value="Geraet.verantwortlichePersonEinrichtung.referenz" /> <label value="Referenz" /> <short value="Referenz" /> <definition value="Hier wird die verantwortliche Person bzw. Einrichtung referenziert." /> <alias value="Gerät / Verantwortliche Person/Einrichtung / Referenz" /> <min value="1" /> <max value="1" /> <type> <code value="BackboneElement" /> </type> </element> <element id="Geraet.notiz"> <path value="Geraet.notiz" /> <label value="Notiz" /> <short value="Notiz" /> <definition value="Hier werden ergänzende freitextliche Kommentare und Notizen vorgenommen, die nicht durch die strukturierten Datenelemente erfassbar sind." /> <alias value="Gerät / Notiz" /> <min value="0" /> <max value="*" /> <type> <code value="BackboneElement" /> </type> </element> <element id="Geraet.notiz.autorIn"> <path value="Geraet.notiz.autorIn" /> <label value="Autor:in" /> <short value="Autor:in" /> <definition value="Hier wird die Person angegeben, die die Notiz erstellt hat." /> <comment value="**Operationalisierungshinweise** Für erstellende Systeme: Dieses Element sollte in der Regel automatisiert befüllt werden, z.B. auf Basis des Benutzermanagements des Primärsystems." /> <alias value="Gerät / Notiz / Autor:in" /> <min value="0" /> <max value="1" /> <type> <code value="BackboneElement" /> </type> </element> <element id="Geraet.notiz.autorIn.referenz"> <path value="Geraet.notiz.autorIn.referenz" /> <label value="Referenz" /> <short value="Referenz" /> <definition value="Hier wird die Person, die die Notiz erstellt hat, referenziert." /> <alias value="Gerät / Notiz / Autor:in / Referenz" /> <min value="0" /> <max value="1" /> <type> <code value="BackboneElement" /> </type> </element> <element id="Geraet.notiz.autorIn.freitext"> <path value="Geraet.notiz.autorIn.freitext" /> <label value="Freitext" /> <short value="Freitext" /> <definition value="Hier wird die Person, die die Notiz erstellt hat, als Freitext angegeben." /> <alias value="Gerät / Notiz / Autor:in / Freitext" /> <min value="0" /> <max value="1" /> <type> <code value="string" /> </type> </element> <element id="Geraet.notiz.zeitpunktDerErstellung"> <path value="Geraet.notiz.zeitpunktDerErstellung" /> <label value="Zeitpunkt der Erstellung" /> <short value="Zeitpunkt der Erstellung" /> <definition value="Hier wird der Zeitpunkt angegeben, zu dem die Notiz erstellt wurde." /> <alias value="Gerät / Notiz / Zeitpunkt der Erstellung" /> <min value="0" /> <max value="1" /> <type> <code value="dateTime" /> </type> </element> <element id="Geraet.notiz.text"> <path value="Geraet.notiz.text" /> <label value="Text" /> <short value="Text" /> <definition value="Hier wird der eigentliche Text der Notiz eingetragen." /> <alias value="Gerät / Notiz / Text" /> <min value="1" /> <max value="1" /> <type> <code value="string" /> </type> </element> </differential> </StructureDefinition>