<StructureDefinition xmlns="http://hl7.org/fhir">
  <id value="DocumentReference" />
  <meta>
    <lastUpdated value="2019-11-01T09:29:23.356+11:00" />
  </meta>
  <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-category">
    <valueString value="Foundation.Documents" />
  </extension>
  <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status">
    <valueCode value="trial-use" />
  </extension>
  <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fmm">
    <valueInteger value="3" />
  </extension>
  <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-security-category">
    <valueCode value="not-classified" />
  </extension>
  <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-wg">
    <valueCode value="sd" />
  </extension>
  <url value="http://hl7.org/fhir/StructureDefinition/DocumentReference" />
  <version value="4.0.1" />
  <name value="KR_DocumentReference" />
  <status value="draft" />
  <date value="2019-11-01T09:29:23+11:00" />
  <publisher value="Health Level Seven International (Structured Documents)" />
  <contact>
    <telecom>
      <system value="url" />
      <value value="http://hl7.org/fhir" />
    </telecom>
  </contact>
  <contact>
    <telecom>
      <system value="url" />
      <value value="http://www.hl7.org/Special/committees/structure/index.cfm" />
    </telecom>
  </contact>
  <description value="모든 종류의 문서에 대한 참조임. 문서를 검색하고 관리할 수 있도록 문서에 대한 메타데이타(metadata)를 제공함. 문서의 범위는 MIMI 형식을 가진 모든 직렬화된 개체이므로 공식 환자 중심 문서(CDA), 임상 노트(note), 스캔 용지 및 정책 텍스트와 같은 비환자 특정 문서를 포함 함." />
  <fhirVersion value="4.0.1" />
  <mapping>
    <identity value="workflow" />
    <uri value="http://hl7.org/fhir/workflow" />
    <name value="Workflow Pattern" />
  </mapping>
  <mapping>
    <identity value="fhircomposition" />
    <uri value="http://hl7.org/fhir/composition" />
    <name value="FHIR Composition" />
  </mapping>
  <mapping>
    <identity value="rim" />
    <uri value="http://hl7.org/v3" />
    <name value="RIM Mapping" />
  </mapping>
  <mapping>
    <identity value="cda" />
    <uri value="http://hl7.org/v3/cda" />
    <name value="CDA (R2)" />
  </mapping>
  <mapping>
    <identity value="w5" />
    <uri value="http://hl7.org/fhir/fivews" />
    <name value="FiveWs Pattern Mapping" />
  </mapping>
  <mapping>
    <identity value="v2" />
    <uri value="http://hl7.org/v2" />
    <name value="HL7 v2 Mapping" />
  </mapping>
  <mapping>
    <identity value="xds" />
    <uri value="http://ihe.net/xds" />
    <name value="XDS metadata equivalent" />
  </mapping>
  <kind value="resource" />
  <abstract value="false" />
  <type value="DocumentReference" />
  <baseDefinition value="http://hl7.org/fhir/StructureDefinition/DomainResource" />
  <derivation value="specialization" />
  <snapshot>
    <element id="DocumentReference">
      <path value="DocumentReference" />
      <short value="문서에 대한 참조" />
      <definition value="모든 종류의 문서에 대한 참조임. 문서를 검색하고 관리할 수 있도록 문서에 대한 메타데이타(metadata)를 제공함. 문서의 범위는 MIMI 형식을 가진 모든 직렬화된 개체이므로 공식 환자 중심 문서(CDA), 임상 노트, 스캔 용지 및 정책 텍스트와 같은 비환자 특정 문서를 포함 함." />
      <comment value="일반적으로, FHIR에서 정의한 문서 이외의 문서에 사용됨." />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="DocumentReference" />
        <min value="0" />
        <max value="*" />
      </base>
      <constraint>
        <key value="dom-2" />
        <severity value="error" />
        <human value="If the resource is contained in another resource, it SHALL NOT contain nested Resources" />
        <expression value="contained.contained.empty()" />
        <xpath value="not(parent::f:contained and f:contained)" />
        <source value="http://hl7.org/fhir/StructureDefinition/DomainResource" />
      </constraint>
      <constraint>
        <key value="dom-4" />
        <severity value="error" />
        <human value="If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated" />
        <expression value="contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()" />
        <xpath value="not(exists(f:contained/*/f:meta/f:versionId)) and not(exists(f:contained/*/f:meta/f:lastUpdated))" />
        <source value="http://hl7.org/fhir/StructureDefinition/DomainResource" />
      </constraint>
      <constraint>
        <key value="dom-3" />
        <severity value="error" />
        <human value="If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource" />
        <expression value="contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty()" />
        <xpath value="not(exists(for $id in f:contained/*/f:id/@value return $contained[not(parent::*/descendant::f:reference/@value=concat('#', $contained/*/id/@value) or descendant::f:reference[@value='#'])]))" />
        <source value="http://hl7.org/fhir/StructureDefinition/DomainResource" />
      </constraint>
      <constraint>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bestpractice">
          <valueBoolean value="true" />
        </extension>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bestpractice-explanation">
          <valueMarkdown value="When a resource has no narrative, only systems that fully understand the data can display the resource to a human safely. Including a human readable representation in the resource makes for a much more robust eco-system and cheaper handling of resources by intermediary systems. Some ecosystems restrict distribution of resources to only those systems that do fully understand the resources, and as a consequence implementers may believe that the narrative is superfluous. However experience shows that such eco-systems often open up to new participants over time." />
        </extension>
        <key value="dom-6" />
        <severity value="warning" />
        <human value="A resource should have narrative for robust management" />
        <expression value="text.`div`.exists()" />
        <xpath value="exists(f:text/h:div)" />
        <source value="http://hl7.org/fhir/StructureDefinition/DomainResource" />
      </constraint>
      <constraint>
        <key value="dom-5" />
        <severity value="error" />
        <human value="If a resource is contained in another resource, it SHALL NOT have a security label" />
        <expression value="contained.meta.security.empty()" />
        <xpath value="not(exists(f:contained/*/f:meta/f:security))" />
        <source value="http://hl7.org/fhir/StructureDefinition/DomainResource" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="Entity. Role, or Act" />
      </mapping>
      <mapping>
        <identity value="workflow" />
        <map value="Event" />
      </mapping>
      <mapping>
        <identity value="fhircomposition" />
        <map value="when describing a Composition" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="Document[classCode=&quot;DOC&quot; and moodCode=&quot;EVN&quot;]" />
      </mapping>
      <mapping>
        <identity value="cda" />
        <map value="when describing a CDA" />
      </mapping>
    </element>
    <element id="DocumentReference.id">
      <path value="DocumentReference.id" />
      <short value="Logical id of this artifact" />
      <definition value="The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes." />
      <comment value="The only time that a resource does not have an id is when it is being submitted to the server using a create operation." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Resource.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <isSummary value="true" />
    </element>
    <element id="DocumentReference.meta">
      <path value="DocumentReference.meta" />
      <short value="Metadata about the resource" />
      <definition value="The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Resource.meta" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="Meta" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.implicitRules">
      <path value="DocumentReference.implicitRules" />
      <short value="A set of rules under which this content was created" />
      <definition value="A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc." />
      <comment value="Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Resource.implicitRules" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="uri" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isModifier value="true" />
      <isModifierReason value="This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation" />
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="DocumentReference.language">
      <path value="DocumentReference.language" />
      <short value="Language of the resource content" />
      <definition value="The base language in which the resource is written." />
      <comment value="Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies  to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute)." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Resource.language" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="code" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-maxValueSet">
          <valueCanonical value="http://hl7.org/fhir/ValueSet/all-languages" />
        </extension>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="Language" />
        </extension>
        <strength value="preferred" />
        <description value="A human language." />
        <valueSet value="http://hl7.org/fhir/ValueSet/languages" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="DocumentReference.text">
      <path value="DocumentReference.text" />
      <short value="Text summary of the resource, for human interpretation" />
      <definition value="A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it &quot;clinically safe&quot; for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety." />
      <comment value="Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied).  This may be necessary for data from legacy systems where information is captured as a &quot;text blob&quot; or where text is additionally entered raw or narrated and encoded information is added later." />
      <alias value="narrative" />
      <alias value="html" />
      <alias value="xhtml" />
      <alias value="display" />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="DomainResource.text" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="Narrative" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="Act.text?" />
      </mapping>
    </element>
    <element id="DocumentReference.contained">
      <path value="DocumentReference.contained" />
      <short value="Contained, inline Resources" />
      <definition value="These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope." />
      <comment value="This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels." />
      <alias value="inline resources" />
      <alias value="anonymous resources" />
      <alias value="contained resources" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="DomainResource.contained" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Resource" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="Entity. Role, or Act" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.extension">
      <path value="DocumentReference.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="DomainResource.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.modifierExtension">
      <path value="DocumentReference.modifierExtension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Extensions that cannot be ignored" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.&#xA;&#xA;Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself)." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <requirements value="Modifier extensions allow for extensions that *cannot* be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored.  This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the [definition of modifier extensions](extensibility.html#modifierExtension)." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="DomainResource.modifierExtension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <isModifier value="true" />
      <isModifierReason value="Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.masterIdentifier">
      <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status">
        <valueCode value="normative" />
      </extension>
      <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version">
        <valueCode value="4.0.0" />
      </extension>
      <path value="DocumentReference.masterIdentifier" />
      <short value="마스터(Master) 버전 특정 식별자" />
      <definition value="문서의 소스에 할당된 문서 식별자. 해당 식별자는 문서의 현재 버전으로 한정됨. 해당 고유 식별자는 다른곳에서 문서의 현재 버전을 식별하는 데 사용될 수 있음." />
      <comment value="CDA 문서 ID확장자 및 경로(root)" />
      <requirements value="The structure and format of this Id shall be consistent with the specification corresponding to the formatCode attribute. (e.g. for a DICOM standard document a 64-character numeric UID, for an HL7 CDA format a serialization of the CDA Document Id extension and root in the form &quot;oid^extension&quot;, where OID is a 64 digits max, and the Id is a 16 UTF-8 char max. If the OID is coded without the extension then the '^' character shall not be included.)." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="DocumentReference.masterIdentifier" />
        <max value="1" />
      </base>
      <type>
        <code value="Identifier" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX / EI (occasionally, more often EI maps to a resource id or a URL)" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs.  Also maps to Role[classCode=IDENT]" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="Identifier" />
      </mapping>
      <mapping>
        <identity value="workflow" />
        <map value="Event.identifier" />
      </mapping>
      <mapping>
        <identity value="w5" />
        <map value="FiveWs.identifier" />
      </mapping>
      <mapping>
        <identity value="fhircomposition" />
        <map value="Composition.identifier" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="TXA-12" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value=".id" />
      </mapping>
      <mapping>
        <identity value="xds" />
        <map value="DocumentEntry.uniqueId" />
      </mapping>
      <mapping>
        <identity value="cda" />
        <map value="ClinicalDocument/id" />
      </mapping>
    </element>
    <element id="DocumentReference.masterIdentifier.id">
      <path value="DocumentReference.masterIdentifier.id" />
      <representation value="xmlAttr" />
      <short value="Unique id for inter-element referencing" />
      <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="DocumentReference.masterIdentifier.extension">
      <path value="DocumentReference.masterIdentifier.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.masterIdentifier.use">
      <path value="DocumentReference.masterIdentifier.use" />
      <short value="usual | official | temp | secondary | old (If known)" />
      <definition value="해당 식별자의 목적" />
      <comment value="Applications can assume that an identifier is permanent unless it explicitly says that it is temporary." />
      <requirements value="Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.use" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="code" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isModifier value="true" />
      <isModifierReason value="This is labeled as &quot;Is Modifier&quot; because applications should not mistake a temporary id for a permanent one." />
      <isSummary value="true" />
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="IdentifierUse" />
        </extension>
        <strength value="required" />
        <description value="Identifies the purpose for this identifier, if known ." />
        <valueSet value="http://hl7.org/fhir/ValueSet/identifier-use|4.0.1" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="N/A" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="Role.code or implied by context" />
      </mapping>
    </element>
    <element id="DocumentReference.masterIdentifier.type">
      <path value="DocumentReference.masterIdentifier.type" />
      <short value="식별자에 대한 설명" />
      <definition value="특정 목적으로 사용되는 식별자를 결정하기 위해 사용하는 식별자의 코드 유형을 나타냄." />
      <comment value="This element deals only with general categories of identifiers.  It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage.   Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type." />
      <requirements value="Allows users to make use of identifiers when the identifier system is not known." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.type" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="CodeableConcept" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="IdentifierType" />
        </extension>
        <strength value="extensible" />
        <description value="A coded type for an identifier that can be used to determine which identifier to use for a specific purpose." />
        <valueSet value="http://hl7.org/fhir/ValueSet/identifier-type" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CE/CNE/CWE" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CD" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept rdfs:subClassOf dt:CD" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.5" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="Role.code or implied by context" />
      </mapping>
    </element>
    <element id="DocumentReference.masterIdentifier.type.id">
      <path value="DocumentReference.masterIdentifier.type.id" />
      <representation value="xmlAttr" />
      <short value="Unique id for inter-element referencing" />
      <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="DocumentReference.masterIdentifier.type.extension">
      <path value="DocumentReference.masterIdentifier.type.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.masterIdentifier.type.coding">
      <path value="DocumentReference.masterIdentifier.type.coding" />
      <short value="전문용어체계(terminology system)에 의해 정의된 코드" />
      <definition value="전문용어체계(terminology system)에 의해 정의된 코드를 참조" />
      <comment value="Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information.  Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true." />
      <requirements value="Allows for alternative encodings within a code system, and translations to other code systems." />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="CodeableConcept.coding" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Coding" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CE/CNE/CWE subset one of the sets of component 1-3 or 4-6" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CV" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding rdfs:subClassOf dt:CDCoding" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.1-8, C*E.10-22" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="union(., ./translation)" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding" />
      </mapping>
    </element>
    <element id="DocumentReference.masterIdentifier.type.coding.id">
      <path value="DocumentReference.masterIdentifier.type.coding.id" />
      <representation value="xmlAttr" />
      <short value="Unique id for inter-element referencing" />
      <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="DocumentReference.masterIdentifier.type.coding.extension">
      <path value="DocumentReference.masterIdentifier.type.coding.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.masterIdentifier.type.coding.system">
      <path value="DocumentReference.masterIdentifier.type.coding.system" />
      <short value="해당 전문용어체계(terminology system)의 식별" />
      <definition value="코드에서 기호의 의미를 정의하는 CodeSystem[코드시스템]를 식별" />
      <comment value="The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...).  OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously." />
      <requirements value="Need to be unambiguous about the source of the definition of the symbol." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.system" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="uri" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.3" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./codeSystem" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem" />
      </mapping>
    </element>
    <element id="DocumentReference.masterIdentifier.type.coding.version">
      <path value="DocumentReference.masterIdentifier.type.coding.version" />
      <short value="해당 시스템의 버전 정보 - 필요한 경우" />
      <definition value="해당 코드를 선택한 시점에 사용된 코드 시스템의 버전임. 올바로 관리된 코드 시스템은 코드의 의미가 버전과 관계없이 일관적이므로 버전을 보고할 필요가 없음. 그러나 코드 시스템의 관리 상태는 지속적으로 보장할 수 없는 부분이며, 코드의 의미가 일관적임을 보장할 수 없는 경우 버전이 교체되어야 함." />
      <comment value="Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.version" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.7" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./codeSystemVersion" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion" />
      </mapping>
    </element>
    <element id="DocumentReference.masterIdentifier.type.coding.code">
      <path value="DocumentReference.masterIdentifier.type.coding.code" />
      <short value="시스템에 정의된 구문(syntax)의 기호(symbol)" />
      <definition value="시스템에 정의된 구문의 기호. 기호는 CodeSystem[코드시스템]에 의해 정의된 구문에서 미리 정의된 코드 또는 표현(expression)일 수 있음. (예: post-coordination)" />
      <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" />
      <requirements value="Need to refer to a particular code in the system." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.code" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="code" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.1" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./code" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code" />
      </mapping>
    </element>
    <element id="DocumentReference.masterIdentifier.type.coding.display">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="DocumentReference.masterIdentifier.type.coding.display" />
      <short value="시스템에 정의된 표현" />
      <definition value="시스템 내 코드의 의미를 시스템의 규칙에 따라 표현한 것을 의미함." />
      <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" />
      <requirements value="Need to be able to carry a human-readable meaning of the code for readers that do not know  the system." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.display" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.2 - but note this is not well followed" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CV.displayName" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName" />
      </mapping>
    </element>
    <element id="DocumentReference.masterIdentifier.type.coding.userSelected">
      <path value="DocumentReference.masterIdentifier.type.coding.userSelected" />
      <short value="해당 코딩 방법이 사용자에 의해 직접 선택되었는지 여부" />
      <definition value="해당 코딩 방법이 사용자에 의해 직접 선택되었음을 나타냄. 즉, 선택 가능한 항목 (코드 혹은 디스플레이) 목록에 존재하지 않음을 나타냄." />
      <comment value="Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely." />
      <requirements value="This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.userSelected" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="boolean" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="Sometimes implied by being first" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CD.codingRationale" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map;   fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [     fhir:source &quot;true&quot;;     fhir:target dt:CDCoding.codingRationale\#O   ]" />
      </mapping>
    </element>
    <element id="DocumentReference.masterIdentifier.type.text">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="DocumentReference.masterIdentifier.type.text" />
      <short value="개념에 대한 일반 텍스트 묘사" />
      <definition value="데이터를 입력한 사용자의 입장에서 보거나/선택하거나/언급한대로의 개념, 혹은 사용자가 의도한 의미를 사람이 사용하는 언어로 표현한 것임." />
      <comment value="Very often the text is the same as a displayName of one of the codings." />
      <requirements value="The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="CodeableConcept.text" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.9. But note many systems use C*E.2 for this" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./originalText[mediaType/code=&quot;text/plain&quot;]/data" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText" />
      </mapping>
    </element>
    <element id="DocumentReference.masterIdentifier.system">
      <path value="DocumentReference.masterIdentifier.system" />
      <short value="식별자 값의 네임스페이스(namespace)" />
      <definition value="설정값에 대한 네임 스페이스 (namespace), 즉 고유한 설정값을 설명하는 URL을 설정함." />
      <comment value="Identifier.system is always case sensitive." />
      <requirements value="There are many sets  of identifiers.  To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.system" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="uri" />
      </type>
      <example>
        <label value="General" />
        <valueUri value="http://www.acme.com/identifiers/patient" />
      </example>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.4 / EI-2-4" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="II.root or Role.id.root" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="./IdentifierType" />
      </mapping>
    </element>
    <element id="DocumentReference.masterIdentifier.value">
      <path value="DocumentReference.masterIdentifier.value" />
      <short value="고유 설정값" />
      <definition value="일반적으로 식별자의 사용과와 관련이 있으며, 시스템 컨텍스트 (context) 내에서 고유한 식별자의 일부분임." />
      <comment value="If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986.  The value's primary purpose is computational mapping.  As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.)  A value formatted for human display can be conveyed using the [Rendered Value extension](extension-rendered-value.html). Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.value" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <example>
        <label value="General" />
        <valueString value="123456" />
      </example>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.1 / EI.1" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root)" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="./Value" />
      </mapping>
    </element>
    <element id="DocumentReference.masterIdentifier.period">
      <path value="DocumentReference.masterIdentifier.period" />
      <short value="식별자의 유효 기간" />
      <definition value="식별자가 사용 가능했거나 가능한 기간을 나타냄." />
      <comment value="A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. &quot;the patient was an inpatient of the hospital for this time range&quot;) or one value from the range applies (e.g. &quot;give to the patient between these two times&quot;).&#xA;&#xA;Period is not used for a duration (a measure of elapsed time). See [Duration](datatypes.html#Duration)." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.period" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="Period" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="per-1" />
        <severity value="error" />
        <human value="If present, start SHALL have a lower value than end" />
        <expression value="start.hasValue().not() or end.hasValue().not() or (start &lt;= end)" />
        <xpath value="not(exists(f:start/@value)) or not(exists(f:end/@value)) or (xs:dateTime(f:start/@value) &lt;= xs:dateTime(f:end/@value))" />
        <source value="http://hl7.org/fhir/StructureDefinition/Period" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="DR" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="IVL&lt;TS&gt;[lowClosed=&quot;true&quot; and highClosed=&quot;true&quot;] or URG&lt;TS&gt;[lowClosed=&quot;true&quot; and highClosed=&quot;true&quot;]" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.7 + CX.8" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="Role.effectiveTime or implied by context" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="./StartDate and ./EndDate" />
      </mapping>
    </element>
    <element id="DocumentReference.masterIdentifier.period.id">
      <path value="DocumentReference.masterIdentifier.period.id" />
      <representation value="xmlAttr" />
      <short value="Unique id for inter-element referencing" />
      <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="DocumentReference.masterIdentifier.period.extension">
      <path value="DocumentReference.masterIdentifier.period.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.masterIdentifier.period.start">
      <path value="DocumentReference.masterIdentifier.period.start" />
      <short value="해당 유효 기간의 시작 시점 (설정된 날짜 포함)" />
      <definition value="해당 유효 기간이 시작되는 시점을 나타냄. 유효 기간은 시작 시점으로 설정된 날짜를 포함함." />
      <comment value="If the low element is missing, the meaning is that the low boundary is not known." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Period.start" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="dateTime" />
      </type>
      <condition value="ele-1" />
      <condition value="per-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="DR.1" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./low" />
      </mapping>
    </element>
    <element id="DocumentReference.masterIdentifier.period.end">
      <path value="DocumentReference.masterIdentifier.period.end" />
      <short value="해당 유효 기간의 종료 시점 (설정된 날짜 포함)" />
      <definition value="기간의 종료. 기간의 종료가 누락된 경우, 인스턴스가 생성될 때 끝이 알려지거나 계획되지 않았음을 의미함. 시작일은 과거일 수 있고 종료일은 미래일 수 있음. 이는 해당 기간이 해당 시간에 종료될 예정임을 의미함" />
      <comment value="The high value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has an end value of 2012-02-03." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Period.end" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="dateTime" />
      </type>
      <meaningWhenMissing value="If the end of the period is missing, it means that the period is ongoing" />
      <condition value="ele-1" />
      <condition value="per-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="DR.2" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./high" />
      </mapping>
    </element>
    <element id="DocumentReference.masterIdentifier.assigner">
      <path value="DocumentReference.masterIdentifier.assigner" />
      <short value="식별자를 발급한 조직 (단순 텍스트 기입 가능)" />
      <definition value="식별자를 발급하고 관리하는 조직을 나타냄." />
      <comment value="The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.assigner" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="Reference" />
        <targetProfile value="http://hl7.org/fhir/StructureDefinition/Organization" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ref-1" />
        <severity value="error" />
        <human value="SHALL have a contained resource if a local reference is provided" />
        <expression value="reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))" />
        <xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Reference" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.4 / (CX.4,CX.9,CX.10)" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="II.assigningAuthorityName but note that this is an improper use by the definition of the field.  Also Role.scoper" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="./IdentifierIssuingAuthority" />
      </mapping>
    </element>
    <element id="DocumentReference.masterIdentifier.assigner.id">
      <path value="DocumentReference.masterIdentifier.assigner.id" />
      <representation value="xmlAttr" />
      <short value="Unique id for inter-element referencing" />
      <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="DocumentReference.masterIdentifier.assigner.extension">
      <path value="DocumentReference.masterIdentifier.assigner.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.masterIdentifier.assigner.reference">
      <path value="DocumentReference.masterIdentifier.assigner.reference" />
      <short value="문안 참조, 상대적, 내부적 혹은 절대적인 URL" />
      <definition value="다른 리소스(resource)을 찾을 수 있는 위치에 대한 참조를 의미함. 해당 참조는 service base URL에 상대적인 경우 상대 참조, 혹은 해당 리소스를 찾을 수 있는 위치인 절대 URL일 수 있음. 해당 참조는 버전에 따라 다를 수 있음. 해당 참조가 FHIR RESTful 서버가 아닌 경우, 버전에 따라 다른 것으로 간주함. 내부 구문 참조('#'으로 시작)는 포함되어 있는 리소스를 참조함." />
      <comment value="Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries.   Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure &quot;/[type]/[id]&quot; then it should be assumed that the reference is to a FHIR RESTful server." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Reference.reference" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <condition value="ref-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.masterIdentifier.assigner.type">
      <path value="DocumentReference.masterIdentifier.assigner.type" />
      <short value="참조(reference)가 참조하는 유형  (예. &quot;Patient&quot;)" />
      <definition value="참조 대상의 예상 형식임. Reference.type과 Reference.reference가 모두 채워지고 Reference.reference가 FHIR URL이면 두가지 모두 일치해야함. 유형은이 참조가 참조하는 유형 인 리소스 정의의 표준 URL임. 참조는 http://hl7.org/fhir/StructureDefinition/과 관련된 URL임. (예) &quot; 환자 &quot; http://hl7.org/fhir/StructureDefinition/Patient에 대한 참조. 절대 URL은 논리 모델에만 허용됨 (리소스가 아닌 논리 모델의 참조에서만 사용할 수 있음)." />
      <comment value="This element is used to indicate the type of  the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Reference.type" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="uri" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="FHIRResourceTypeExt" />
        </extension>
        <strength value="extensible" />
        <description value="Aa resource (or, for logical models, the URI of the logical model)." />
        <valueSet value="http://hl7.org/fhir/ValueSet/resource-types" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.masterIdentifier.assigner.identifier">
      <path value="DocumentReference.masterIdentifier.assigner.identifier" />
      <short value="문안 참조를 알 수 없는 경우의 논리 참조 (logical reference)" />
      <definition value="대상 리소스의 식별자. 이것은 다른 리소스를 직접 참조할 방법이 없을 때 사용- 해당 앤티티(entity)가 FHIR 서버를 통해 사용할 수 없거나  리소스 작성자가 알려진 식별자를 실제 위치로 변활할 방법이 없기 때문에 이 방법이 사용됨. Reference.identifier가 실제로 FHIR 인스턴스로 노출되는 것을 가르킬(point) 필요는 없지만, FHIR 인스턴스로 노출될 것으로 예상되는 비즈니스 개념을 가리켜야하며, 해당 인스턴스는 참조가 허용되는 FHIR 리소스 유형이여야함." />
      <comment value="When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. &#xA;&#xA;When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference&#xA;&#xA;Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.&#xA;&#xA;Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference.  For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport).  One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any)." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Reference.identifier" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="Identifier" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX / EI (occasionally, more often EI maps to a resource id or a URL)" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs.  Also maps to Role[classCode=IDENT]" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="Identifier" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value=".identifier" />
      </mapping>
    </element>
    <element id="DocumentReference.masterIdentifier.assigner.display">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="DocumentReference.masterIdentifier.assigner.display" />
      <short value="해당 리소스를 대체하는 텍스트 설명" />
      <definition value="리소스 참조 외에도 리소스를 식별하기 위한 일반 텍스트 설명임." />
      <comment value="This is generally not the same as the Resource.text of the referenced resource.  The purpose is to identify what's being referenced, not to fully describe it." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Reference.display" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.identifier">
      <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status">
        <valueCode value="normative" />
      </extension>
      <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version">
        <valueCode value="4.0.0" />
      </extension>
      <path value="DocumentReference.identifier" />
      <short value="문서에 대한 기타 식별자." />
      <definition value="문서와 관련된 기타 식별자로 버전과 독립된 식별자를 포함 함." />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="DocumentReference.identifier" />
      </base>
      <type>
        <code value="Identifier" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX / EI (occasionally, more often EI maps to a resource id or a URL)" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs.  Also maps to Role[classCode=IDENT]" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="Identifier" />
      </mapping>
      <mapping>
        <identity value="workflow" />
        <map value="Event.identifier" />
      </mapping>
      <mapping>
        <identity value="w5" />
        <map value="FiveWs.identifier" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="TXA-16?" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value=".id / .setId" />
      </mapping>
      <mapping>
        <identity value="xds" />
        <map value="DocumentEntry.entryUUID" />
      </mapping>
    </element>
    <element id="DocumentReference.identifier.id">
      <path value="DocumentReference.identifier.id" />
      <representation value="xmlAttr" />
      <short value="Unique id for inter-element referencing" />
      <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="DocumentReference.identifier.extension">
      <path value="DocumentReference.identifier.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.identifier.use">
      <path value="DocumentReference.identifier.use" />
      <short value="usual | official | temp | secondary | old (If known)" />
      <definition value="해당 식별자의 목적" />
      <comment value="Applications can assume that an identifier is permanent unless it explicitly says that it is temporary." />
      <requirements value="Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.use" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="code" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isModifier value="true" />
      <isModifierReason value="This is labeled as &quot;Is Modifier&quot; because applications should not mistake a temporary id for a permanent one." />
      <isSummary value="true" />
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="IdentifierUse" />
        </extension>
        <strength value="required" />
        <description value="Identifies the purpose for this identifier, if known ." />
        <valueSet value="http://hl7.org/fhir/ValueSet/identifier-use|4.0.1" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="N/A" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="Role.code or implied by context" />
      </mapping>
    </element>
    <element id="DocumentReference.identifier.type">
      <path value="DocumentReference.identifier.type" />
      <short value="식별자에 대한 설명" />
      <definition value="특정 목적으로 사용되는 식별자를 결정하기 위해 사용하는 식별자의 코드 유형을 나타냄." />
      <comment value="This element deals only with general categories of identifiers.  It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage.   Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type." />
      <requirements value="Allows users to make use of identifiers when the identifier system is not known." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.type" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="CodeableConcept" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="IdentifierType" />
        </extension>
        <strength value="extensible" />
        <description value="A coded type for an identifier that can be used to determine which identifier to use for a specific purpose." />
        <valueSet value="http://hl7.org/fhir/ValueSet/identifier-type" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CE/CNE/CWE" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CD" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept rdfs:subClassOf dt:CD" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.5" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="Role.code or implied by context" />
      </mapping>
    </element>
    <element id="DocumentReference.identifier.type.id">
      <path value="DocumentReference.identifier.type.id" />
      <representation value="xmlAttr" />
      <short value="Unique id for inter-element referencing" />
      <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="DocumentReference.identifier.type.extension">
      <path value="DocumentReference.identifier.type.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.identifier.type.coding">
      <path value="DocumentReference.identifier.type.coding" />
      <short value="전문용어체계(terminology system)에 의해 정의된 코드" />
      <definition value="전문용어체계(terminology system)에 의해 정의된 코드를 참조" />
      <comment value="Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information.  Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true." />
      <requirements value="Allows for alternative encodings within a code system, and translations to other code systems." />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="CodeableConcept.coding" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Coding" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CE/CNE/CWE subset one of the sets of component 1-3 or 4-6" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CV" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding rdfs:subClassOf dt:CDCoding" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.1-8, C*E.10-22" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="union(., ./translation)" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding" />
      </mapping>
    </element>
    <element id="DocumentReference.identifier.type.coding.id">
      <path value="DocumentReference.identifier.type.coding.id" />
      <representation value="xmlAttr" />
      <short value="Unique id for inter-element referencing" />
      <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="DocumentReference.identifier.type.coding.extension">
      <path value="DocumentReference.identifier.type.coding.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.identifier.type.coding.system">
      <path value="DocumentReference.identifier.type.coding.system" />
      <short value="해당 전문용어체계(terminology system)의 식별" />
      <definition value="코드에서 기호의 의미를 정의하는 CodeSystem[코드시스템]를 식별" />
      <comment value="The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...).  OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously." />
      <requirements value="Need to be unambiguous about the source of the definition of the symbol." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.system" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="uri" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.3" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./codeSystem" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem" />
      </mapping>
    </element>
    <element id="DocumentReference.identifier.type.coding.version">
      <path value="DocumentReference.identifier.type.coding.version" />
      <short value="해당 시스템의 버전 정보 - 필요한 경우" />
      <definition value="해당 코드를 선택한 시점에 사용된 코드 시스템의 버전임. 올바로 관리된 코드 시스템은 코드의 의미가 버전과 관계없이 일관적이므로 버전을 보고할 필요가 없음. 그러나 코드 시스템의 관리 상태는 지속적으로 보장할 수 없는 부분이며, 코드의 의미가 일관적임을 보장할 수 없는 경우 버전이 교체되어야 함." />
      <comment value="Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.version" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.7" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./codeSystemVersion" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion" />
      </mapping>
    </element>
    <element id="DocumentReference.identifier.type.coding.code">
      <path value="DocumentReference.identifier.type.coding.code" />
      <short value="시스템에 정의된 구문(syntax)의 기호(symbol)" />
      <definition value="시스템에 정의된 구문의 기호. 기호는 CodeSystem[코드시스템]에 의해 정의된 구문에서 미리 정의된 코드 또는 표현(expression)일 수 있음. (예: post-coordination)" />
      <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" />
      <requirements value="Need to refer to a particular code in the system." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.code" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="code" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.1" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./code" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code" />
      </mapping>
    </element>
    <element id="DocumentReference.identifier.type.coding.display">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="DocumentReference.identifier.type.coding.display" />
      <short value="시스템에 정의된 표현" />
      <definition value="시스템 내 코드의 의미를 시스템의 규칙에 따라 표현한 것을 의미함." />
      <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" />
      <requirements value="Need to be able to carry a human-readable meaning of the code for readers that do not know  the system." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.display" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.2 - but note this is not well followed" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CV.displayName" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName" />
      </mapping>
    </element>
    <element id="DocumentReference.identifier.type.coding.userSelected">
      <path value="DocumentReference.identifier.type.coding.userSelected" />
      <short value="해당 코딩 방법이 사용자에 의해 직접 선택되었는지 여부" />
      <definition value="해당 코딩 방법이 사용자에 의해 직접 선택되었음을 나타냄. 즉, 선택 가능한 항목 (코드 혹은 디스플레이) 목록에 존재하지 않음을 나타냄." />
      <comment value="Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely." />
      <requirements value="This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.userSelected" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="boolean" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="Sometimes implied by being first" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CD.codingRationale" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map;   fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [     fhir:source &quot;true&quot;;     fhir:target dt:CDCoding.codingRationale\#O   ]" />
      </mapping>
    </element>
    <element id="DocumentReference.identifier.type.text">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="DocumentReference.identifier.type.text" />
      <short value="개념에 대한 일반 텍스트 묘사" />
      <definition value="데이터를 입력한 사용자의 입장에서 보거나/선택하거나/언급한대로의 개념, 혹은 사용자가 의도한 의미를 사람이 사용하는 언어로 표현한 것임." />
      <comment value="Very often the text is the same as a displayName of one of the codings." />
      <requirements value="The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="CodeableConcept.text" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.9. But note many systems use C*E.2 for this" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./originalText[mediaType/code=&quot;text/plain&quot;]/data" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText" />
      </mapping>
    </element>
    <element id="DocumentReference.identifier.system">
      <path value="DocumentReference.identifier.system" />
      <short value="식별자 값의 네임스페이스(namespace)" />
      <definition value="설정값에 대한 네임 스페이스 (namespace), 즉 고유한 설정값을 설명하는 URL을 설정함." />
      <comment value="Identifier.system is always case sensitive." />
      <requirements value="There are many sets  of identifiers.  To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.system" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="uri" />
      </type>
      <example>
        <label value="General" />
        <valueUri value="http://www.acme.com/identifiers/patient" />
      </example>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.4 / EI-2-4" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="II.root or Role.id.root" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="./IdentifierType" />
      </mapping>
    </element>
    <element id="DocumentReference.identifier.value">
      <path value="DocumentReference.identifier.value" />
      <short value="고유 설정값" />
      <definition value="일반적으로 식별자의 사용과와 관련이 있으며, 시스템 컨텍스트 (context) 내에서 고유한 식별자의 일부분임." />
      <comment value="If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986.  The value's primary purpose is computational mapping.  As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.)  A value formatted for human display can be conveyed using the [Rendered Value extension](extension-rendered-value.html). Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.value" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <example>
        <label value="General" />
        <valueString value="123456" />
      </example>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.1 / EI.1" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root)" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="./Value" />
      </mapping>
    </element>
    <element id="DocumentReference.identifier.period">
      <path value="DocumentReference.identifier.period" />
      <short value="식별자의 유효 기간" />
      <definition value="식별자가 사용 가능했거나 가능한 기간을 나타냄." />
      <comment value="A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. &quot;the patient was an inpatient of the hospital for this time range&quot;) or one value from the range applies (e.g. &quot;give to the patient between these two times&quot;).&#xA;&#xA;Period is not used for a duration (a measure of elapsed time). See [Duration](datatypes.html#Duration)." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.period" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="Period" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="per-1" />
        <severity value="error" />
        <human value="If present, start SHALL have a lower value than end" />
        <expression value="start.hasValue().not() or end.hasValue().not() or (start &lt;= end)" />
        <xpath value="not(exists(f:start/@value)) or not(exists(f:end/@value)) or (xs:dateTime(f:start/@value) &lt;= xs:dateTime(f:end/@value))" />
        <source value="http://hl7.org/fhir/StructureDefinition/Period" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="DR" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="IVL&lt;TS&gt;[lowClosed=&quot;true&quot; and highClosed=&quot;true&quot;] or URG&lt;TS&gt;[lowClosed=&quot;true&quot; and highClosed=&quot;true&quot;]" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.7 + CX.8" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="Role.effectiveTime or implied by context" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="./StartDate and ./EndDate" />
      </mapping>
    </element>
    <element id="DocumentReference.identifier.period.id">
      <path value="DocumentReference.identifier.period.id" />
      <representation value="xmlAttr" />
      <short value="Unique id for inter-element referencing" />
      <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="DocumentReference.identifier.period.extension">
      <path value="DocumentReference.identifier.period.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.identifier.period.start">
      <path value="DocumentReference.identifier.period.start" />
      <short value="해당 유효 기간의 시작 시점 (설정된 날짜 포함)" />
      <definition value="해당 유효 기간이 시작되는 시점을 나타냄. 유효 기간은 시작 시점으로 설정된 날짜를 포함함." />
      <comment value="If the low element is missing, the meaning is that the low boundary is not known." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Period.start" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="dateTime" />
      </type>
      <condition value="ele-1" />
      <condition value="per-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="DR.1" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./low" />
      </mapping>
    </element>
    <element id="DocumentReference.identifier.period.end">
      <path value="DocumentReference.identifier.period.end" />
      <short value="해당 유효 기간의 종료 시점 (설정된 날짜 포함)" />
      <definition value="기간의 종료. 기간의 종료가 누락된 경우, 인스턴스가 생성될 때 끝이 알려지거나 계획되지 않았음을 의미함. 시작일은 과거일 수 있고 종료일은 미래일 수 있음. 이는 해당 기간이 해당 시간에 종료될 예정임을 의미함" />
      <comment value="The high value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has an end value of 2012-02-03." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Period.end" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="dateTime" />
      </type>
      <meaningWhenMissing value="If the end of the period is missing, it means that the period is ongoing" />
      <condition value="ele-1" />
      <condition value="per-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="DR.2" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./high" />
      </mapping>
    </element>
    <element id="DocumentReference.identifier.assigner">
      <path value="DocumentReference.identifier.assigner" />
      <short value="식별자를 발급한 조직 (단순 텍스트 기입 가능)" />
      <definition value="식별자를 발급하고 관리하는 조직을 나타냄." />
      <comment value="The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.assigner" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="Reference" />
        <targetProfile value="http://hl7.org/fhir/StructureDefinition/Organization" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ref-1" />
        <severity value="error" />
        <human value="SHALL have a contained resource if a local reference is provided" />
        <expression value="reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))" />
        <xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Reference" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.4 / (CX.4,CX.9,CX.10)" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="II.assigningAuthorityName but note that this is an improper use by the definition of the field.  Also Role.scoper" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="./IdentifierIssuingAuthority" />
      </mapping>
    </element>
    <element id="DocumentReference.identifier.assigner.id">
      <path value="DocumentReference.identifier.assigner.id" />
      <representation value="xmlAttr" />
      <short value="Unique id for inter-element referencing" />
      <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="DocumentReference.identifier.assigner.extension">
      <path value="DocumentReference.identifier.assigner.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.identifier.assigner.reference">
      <path value="DocumentReference.identifier.assigner.reference" />
      <short value="문안 참조, 상대적, 내부적 혹은 절대적인 URL" />
      <definition value="다른 리소스(resource)을 찾을 수 있는 위치에 대한 참조를 의미함. 해당 참조는 service base URL에 상대적인 경우 상대 참조, 혹은 해당 리소스를 찾을 수 있는 위치인 절대 URL일 수 있음. 해당 참조는 버전에 따라 다를 수 있음. 해당 참조가 FHIR RESTful 서버가 아닌 경우, 버전에 따라 다른 것으로 간주함. 내부 구문 참조('#'으로 시작)는 포함되어 있는 리소스를 참조함." />
      <comment value="Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries.   Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure &quot;/[type]/[id]&quot; then it should be assumed that the reference is to a FHIR RESTful server." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Reference.reference" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <condition value="ref-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.identifier.assigner.type">
      <path value="DocumentReference.identifier.assigner.type" />
      <short value="참조(reference)가 참조하는 유형  (예. &quot;Patient&quot;)" />
      <definition value="참조 대상의 예상 형식임. Reference.type과 Reference.reference가 모두 채워지고 Reference.reference가 FHIR URL이면 두가지 모두 일치해야함. 유형은이 참조가 참조하는 유형 인 리소스 정의의 표준 URL임. 참조는 http://hl7.org/fhir/StructureDefinition/과 관련된 URL임. (예) &quot; 환자 &quot; http://hl7.org/fhir/StructureDefinition/Patient에 대한 참조. 절대 URL은 논리 모델에만 허용됨 (리소스가 아닌 논리 모델의 참조에서만 사용할 수 있음)." />
      <comment value="This element is used to indicate the type of  the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Reference.type" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="uri" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="FHIRResourceTypeExt" />
        </extension>
        <strength value="extensible" />
        <description value="Aa resource (or, for logical models, the URI of the logical model)." />
        <valueSet value="http://hl7.org/fhir/ValueSet/resource-types" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.identifier.assigner.identifier">
      <path value="DocumentReference.identifier.assigner.identifier" />
      <short value="문안 참조를 알 수 없는 경우의 논리 참조 (logical reference)" />
      <definition value="대상 리소스의 식별자. 이것은 다른 리소스를 직접 참조할 방법이 없을 때 사용- 해당 앤티티(entity)가 FHIR 서버를 통해 사용할 수 없거나  리소스 작성자가 알려진 식별자를 실제 위치로 변활할 방법이 없기 때문에 이 방법이 사용됨. Reference.identifier가 실제로 FHIR 인스턴스로 노출되는 것을 가르킬(point) 필요는 없지만, FHIR 인스턴스로 노출될 것으로 예상되는 비즈니스 개념을 가리켜야하며, 해당 인스턴스는 참조가 허용되는 FHIR 리소스 유형이여야함." />
      <comment value="When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. &#xA;&#xA;When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference&#xA;&#xA;Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.&#xA;&#xA;Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference.  For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport).  One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any)." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Reference.identifier" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="Identifier" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX / EI (occasionally, more often EI maps to a resource id or a URL)" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs.  Also maps to Role[classCode=IDENT]" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="Identifier" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value=".identifier" />
      </mapping>
    </element>
    <element id="DocumentReference.identifier.assigner.display">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="DocumentReference.identifier.assigner.display" />
      <short value="해당 리소스를 대체하는 텍스트 설명" />
      <definition value="리소스 참조 외에도 리소스를 식별하기 위한 일반 텍스트 설명임." />
      <comment value="This is generally not the same as the Resource.text of the referenced resource.  The purpose is to identify what's being referenced, not to fully describe it." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Reference.display" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.status">
      <path value="DocumentReference.status" />
      <short value="current | superseded | entered-in-error" />
      <definition value="DocumentReference[]의 상태" />
      <comment value="DocumentReference[] 객체의 상태이며 docStatus 요소와 무관할 수 있음. 상태에는 문서 또는 참조가 현재 유효하지 않은 것으로 표시된 코드가 포함되어 있으므로 해당 요소는 수정자(modifier)로 레이블이 지정됨." />
      <min value="1" />
      <max value="1" />
      <base>
        <path value="DocumentReference.status" />
        <min value="1" />
        <max value="1" />
      </base>
      <type>
        <code value="code" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isModifier value="true" />
      <isModifierReason value="This element is labelled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid" />
      <isSummary value="true" />
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="DocumentReferenceStatus" />
        </extension>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-isCommonBinding">
          <valueBoolean value="true" />
        </extension>
        <strength value="required" />
        <description value="The status of the document reference." />
        <valueSet value="http://hl7.org/fhir/ValueSet/document-reference-status|4.0.1" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="workflow" />
        <map value="Event.status" />
      </mapping>
      <mapping>
        <identity value="w5" />
        <map value="FiveWs.status" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="TXA-19" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="interim: .completionCode=&quot;IN&quot; &amp; ./statusCode[isNormalDatatype()]=&quot;active&quot;;  final: .completionCode=&quot;AU&quot; &amp;&amp;  ./statusCode[isNormalDatatype()]=&quot;complete&quot; and not(./inboundRelationship[typeCode=&quot;SUBJ&quot; and isNormalActRelationship()]/source[subsumesCode(&quot;ActClass#CACT&quot;) and moodCode=&quot;EVN&quot; and domainMember(&quot;ReviseDocument&quot;, code) and isNormalAct()]);  amended: .completionCode=&quot;AU&quot; &amp;&amp;  ./statusCode[isNormalDatatype()]=&quot;complete&quot; and ./inboundRelationship[typeCode=&quot;SUBJ&quot; and isNormalActRelationship()]/source[subsumesCode(&quot;ActClass#CACT&quot;) and moodCode=&quot;EVN&quot; and domainMember(&quot;ReviseDocument&quot;, code) and isNormalAct() and statusCode=&quot;completed&quot;];  withdrawn : .completionCode=NI &amp;&amp;  ./statusCode[isNormalDatatype()]=&quot;obsolete&quot;" />
      </mapping>
      <mapping>
        <identity value="xds" />
        <map value="DocumentEntry.availabilityStatus" />
      </mapping>
    </element>
    <element id="DocumentReference.docStatus">
      <path value="DocumentReference.docStatus" />
      <short value="preliminary | final | amended | entered-in-error" />
      <definition value="근본적인 문서의 상태." />
      <comment value="지정된 문서는 다양한 라이프사이클(lifecycle) 상태에 있을 수 있음." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="DocumentReference.docStatus" />
        <max value="1" />
      </base>
      <type>
        <code value="code" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="ReferredDocumentStatus" />
        </extension>
        <strength value="required" />
        <description value="Status of the underlying document." />
        <valueSet value="http://hl7.org/fhir/ValueSet/composition-status|4.0.1" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="w5" />
        <map value="FiveWs.status" />
      </mapping>
      <mapping>
        <identity value="fhircomposition" />
        <map value="Composition.status" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="TXA-17" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value=".statusCode" />
      </mapping>
    </element>
    <element id="DocumentReference.type">
      <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status">
        <valueCode value="normative" />
      </extension>
      <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version">
        <valueCode value="4.0.0" />
      </extension>
      <path value="DocumentReference.type" />
      <short value="문서의 종류 (가능한 경우 LOINC(" />
      <definition value="참조된 특정 문서의 유형을 지정함 (예: 기록 및 물리적, 퇴원 요약, 진행 참고). 일반적으로 문서를 참조하는 목적과 동일함." />
      <comment value="정확한 문서 유형을 설명하는 주요 메타데이터(metadata) 요소. 사용자가 문서 목록을 볼 때 해당 문서가 관심 사항인지 여부를 평가하는 데 도움이 됨." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="DocumentReference.type" />
        <max value="1" />
      </base>
      <type>
        <code value="CodeableConcept" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="DocumentC80Type" />
        </extension>
        <strength value="preferred" />
        <description value="Precise type of clinical document." />
        <valueSet value="http://hl7.org/fhir/ValueSet/c80-doc-typecodes" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CE/CNE/CWE" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CD" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept rdfs:subClassOf dt:CD" />
      </mapping>
      <mapping>
        <identity value="workflow" />
        <map value="Event.code" />
      </mapping>
      <mapping>
        <identity value="w5" />
        <map value="FiveWs.class" />
      </mapping>
      <mapping>
        <identity value="fhircomposition" />
        <map value="Composition.type" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="TXA-2" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./code" />
      </mapping>
      <mapping>
        <identity value="xds" />
        <map value="DocumentEntry.type" />
      </mapping>
      <mapping>
        <identity value="cda" />
        <map value="ClinicalDocument/code/@code &#xA;&#xA;The typeCode should be mapped from the ClinicalDocument/code element to a set of document type codes configured in the affinity domain. One suggested coding system to use for typeCode is LOINC, in which case the mapping step can be omitted." />
      </mapping>
    </element>
    <element id="DocumentReference.type.id">
      <path value="DocumentReference.type.id" />
      <representation value="xmlAttr" />
      <short value="Unique id for inter-element referencing" />
      <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="DocumentReference.type.extension">
      <path value="DocumentReference.type.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.type.coding">
      <path value="DocumentReference.type.coding" />
      <short value="전문용어체계(terminology system)에 의해 정의된 코드" />
      <definition value="전문용어체계(terminology system)에 의해 정의된 코드를 참조" />
      <comment value="Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information.  Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true." />
      <requirements value="Allows for alternative encodings within a code system, and translations to other code systems." />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="CodeableConcept.coding" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Coding" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CE/CNE/CWE subset one of the sets of component 1-3 or 4-6" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CV" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding rdfs:subClassOf dt:CDCoding" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.1-8, C*E.10-22" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="union(., ./translation)" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding" />
      </mapping>
    </element>
    <element id="DocumentReference.type.coding.id">
      <path value="DocumentReference.type.coding.id" />
      <representation value="xmlAttr" />
      <short value="Unique id for inter-element referencing" />
      <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="DocumentReference.type.coding.extension">
      <path value="DocumentReference.type.coding.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.type.coding.system">
      <path value="DocumentReference.type.coding.system" />
      <short value="해당 전문용어체계(terminology system)의 식별" />
      <definition value="코드에서 기호의 의미를 정의하는 CodeSystem[코드시스템]를 식별" />
      <comment value="The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...).  OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously." />
      <requirements value="Need to be unambiguous about the source of the definition of the symbol." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.system" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="uri" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.3" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./codeSystem" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem" />
      </mapping>
    </element>
    <element id="DocumentReference.type.coding.version">
      <path value="DocumentReference.type.coding.version" />
      <short value="해당 시스템의 버전 정보 - 필요한 경우" />
      <definition value="해당 코드를 선택한 시점에 사용된 코드 시스템의 버전임. 올바로 관리된 코드 시스템은 코드의 의미가 버전과 관계없이 일관적이므로 버전을 보고할 필요가 없음. 그러나 코드 시스템의 관리 상태는 지속적으로 보장할 수 없는 부분이며, 코드의 의미가 일관적임을 보장할 수 없는 경우 버전이 교체되어야 함." />
      <comment value="Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.version" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.7" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./codeSystemVersion" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion" />
      </mapping>
    </element>
    <element id="DocumentReference.type.coding.code">
      <path value="DocumentReference.type.coding.code" />
      <short value="시스템에 정의된 구문(syntax)의 기호(symbol)" />
      <definition value="시스템에 정의된 구문의 기호. 기호는 CodeSystem[코드시스템]에 의해 정의된 구문에서 미리 정의된 코드 또는 표현(expression)일 수 있음. (예: post-coordination)" />
      <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" />
      <requirements value="Need to refer to a particular code in the system." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.code" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="code" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.1" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./code" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code" />
      </mapping>
    </element>
    <element id="DocumentReference.type.coding.display">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="DocumentReference.type.coding.display" />
      <short value="시스템에 정의된 표현" />
      <definition value="시스템 내 코드의 의미를 시스템의 규칙에 따라 표현한 것을 의미함." />
      <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" />
      <requirements value="Need to be able to carry a human-readable meaning of the code for readers that do not know  the system." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.display" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.2 - but note this is not well followed" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CV.displayName" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName" />
      </mapping>
    </element>
    <element id="DocumentReference.type.coding.userSelected">
      <path value="DocumentReference.type.coding.userSelected" />
      <short value="해당 코딩 방법이 사용자에 의해 직접 선택되었는지 여부" />
      <definition value="해당 코딩 방법이 사용자에 의해 직접 선택되었음을 나타냄. 즉, 선택 가능한 항목 (코드 혹은 디스플레이) 목록에 존재하지 않음을 나타냄." />
      <comment value="Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely." />
      <requirements value="This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.userSelected" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="boolean" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="Sometimes implied by being first" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CD.codingRationale" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map;   fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [     fhir:source &quot;true&quot;;     fhir:target dt:CDCoding.codingRationale\#O   ]" />
      </mapping>
    </element>
    <element id="DocumentReference.type.text">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="DocumentReference.type.text" />
      <short value="개념에 대한 일반 텍스트 묘사" />
      <definition value="데이터를 입력한 사용자의 입장에서 보거나/선택하거나/언급한대로의 개념, 혹은 사용자가 의도한 의미를 사람이 사용하는 언어로 표현한 것임." />
      <comment value="Very often the text is the same as a displayName of one of the codings." />
      <requirements value="The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="CodeableConcept.text" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.9. But note many systems use C*E.2 for this" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./originalText[mediaType/code=&quot;text/plain&quot;]/data" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText" />
      </mapping>
    </element>
    <element id="DocumentReference.category">
      <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status">
        <valueCode value="normative" />
      </extension>
      <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version">
        <valueCode value="4.0.0" />
      </extension>
      <path value="DocumentReference.category" />
      <short value="문서의 카테고리화" />
      <definition value="참조된 문서 유형에 대한 카테고리 - 인덱싱 및 검색에 활용 될 수 있음. DocumentReference.type에 지정된 코드로 부터 암시되거나 파생될 수 있음." />
      <comment value="문서의 카테고리 또는 분류를 설명하는 주요 메타데이터(metadata). 사용 방법에 따라 유사한 문서를 분류하는 더 넓은 관점이며, 검색에 사용되는 기본 키(primary key) 임." />
      <alias value="claxs" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="DocumentReference.category" />
      </base>
      <type>
        <code value="CodeableConcept" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="DocumentC80Class" />
        </extension>
        <strength value="example" />
        <description value="High-level kind of a clinical document at a macro level." />
        <valueSet value="http://hl7.org/fhir/ValueSet/document-classcodes" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CE/CNE/CWE" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CD" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept rdfs:subClassOf dt:CD" />
      </mapping>
      <mapping>
        <identity value="w5" />
        <map value="FiveWs.class" />
      </mapping>
      <mapping>
        <identity value="fhircomposition" />
        <map value="Composition.class" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value=".outboundRelationship[typeCode=&quot;COMP].target[classCode=&quot;LIST&quot;, moodCode=&quot;EVN&quot;].code" />
      </mapping>
      <mapping>
        <identity value="xds" />
        <map value="DocumentEntry.class" />
      </mapping>
      <mapping>
        <identity value="cda" />
        <map value="Derived from a mapping of /ClinicalDocument/code/@code to an Affinity Domain specified coded value to use and coding system. Affinity Domains are encouraged to use the appropriate value for Type of Service, based on the LOINC Type of Service (see Page 53 of the LOINC User's Manual). Must be consistent with /ClinicalDocument/code/@code" />
      </mapping>
    </element>
    <element id="DocumentReference.category.id">
      <path value="DocumentReference.category.id" />
      <representation value="xmlAttr" />
      <short value="Unique id for inter-element referencing" />
      <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="DocumentReference.category.extension">
      <path value="DocumentReference.category.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.category.coding">
      <path value="DocumentReference.category.coding" />
      <short value="전문용어체계(terminology system)에 의해 정의된 코드" />
      <definition value="전문용어체계(terminology system)에 의해 정의된 코드를 참조" />
      <comment value="Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information.  Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true." />
      <requirements value="Allows for alternative encodings within a code system, and translations to other code systems." />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="CodeableConcept.coding" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Coding" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CE/CNE/CWE subset one of the sets of component 1-3 or 4-6" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CV" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding rdfs:subClassOf dt:CDCoding" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.1-8, C*E.10-22" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="union(., ./translation)" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding" />
      </mapping>
    </element>
    <element id="DocumentReference.category.coding.id">
      <path value="DocumentReference.category.coding.id" />
      <representation value="xmlAttr" />
      <short value="Unique id for inter-element referencing" />
      <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="DocumentReference.category.coding.extension">
      <path value="DocumentReference.category.coding.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.category.coding.system">
      <path value="DocumentReference.category.coding.system" />
      <short value="해당 전문용어체계(terminology system)의 식별" />
      <definition value="코드에서 기호의 의미를 정의하는 CodeSystem[코드시스템]를 식별" />
      <comment value="The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...).  OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously." />
      <requirements value="Need to be unambiguous about the source of the definition of the symbol." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.system" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="uri" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.3" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./codeSystem" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem" />
      </mapping>
    </element>
    <element id="DocumentReference.category.coding.version">
      <path value="DocumentReference.category.coding.version" />
      <short value="해당 시스템의 버전 정보 - 필요한 경우" />
      <definition value="해당 코드를 선택한 시점에 사용된 코드 시스템의 버전임. 올바로 관리된 코드 시스템은 코드의 의미가 버전과 관계없이 일관적이므로 버전을 보고할 필요가 없음. 그러나 코드 시스템의 관리 상태는 지속적으로 보장할 수 없는 부분이며, 코드의 의미가 일관적임을 보장할 수 없는 경우 버전이 교체되어야 함." />
      <comment value="Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.version" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.7" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./codeSystemVersion" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion" />
      </mapping>
    </element>
    <element id="DocumentReference.category.coding.code">
      <path value="DocumentReference.category.coding.code" />
      <short value="시스템에 정의된 구문(syntax)의 기호(symbol)" />
      <definition value="시스템에 정의된 구문의 기호. 기호는 CodeSystem[코드시스템]에 의해 정의된 구문에서 미리 정의된 코드 또는 표현(expression)일 수 있음. (예: post-coordination)" />
      <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" />
      <requirements value="Need to refer to a particular code in the system." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.code" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="code" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.1" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./code" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code" />
      </mapping>
    </element>
    <element id="DocumentReference.category.coding.display">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="DocumentReference.category.coding.display" />
      <short value="시스템에 정의된 표현" />
      <definition value="시스템 내 코드의 의미를 시스템의 규칙에 따라 표현한 것을 의미함." />
      <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" />
      <requirements value="Need to be able to carry a human-readable meaning of the code for readers that do not know  the system." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.display" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.2 - but note this is not well followed" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CV.displayName" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName" />
      </mapping>
    </element>
    <element id="DocumentReference.category.coding.userSelected">
      <path value="DocumentReference.category.coding.userSelected" />
      <short value="해당 코딩 방법이 사용자에 의해 직접 선택되었는지 여부" />
      <definition value="해당 코딩 방법이 사용자에 의해 직접 선택되었음을 나타냄. 즉, 선택 가능한 항목 (코드 혹은 디스플레이) 목록에 존재하지 않음을 나타냄." />
      <comment value="Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely." />
      <requirements value="This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.userSelected" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="boolean" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="Sometimes implied by being first" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CD.codingRationale" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map;   fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [     fhir:source &quot;true&quot;;     fhir:target dt:CDCoding.codingRationale\#O   ]" />
      </mapping>
    </element>
    <element id="DocumentReference.category.text">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="DocumentReference.category.text" />
      <short value="개념에 대한 일반 텍스트 묘사" />
      <definition value="데이터를 입력한 사용자의 입장에서 보거나/선택하거나/언급한대로의 개념, 혹은 사용자가 의도한 의미를 사람이 사용하는 언어로 표현한 것임." />
      <comment value="Very often the text is the same as a displayName of one of the codings." />
      <requirements value="The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="CodeableConcept.text" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.9. But note many systems use C*E.2 for this" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./originalText[mediaType/code=&quot;text/plain&quot;]/data" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText" />
      </mapping>
    </element>
    <element id="DocumentReference.subject">
      <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status">
        <valueCode value="normative" />
      </extension>
      <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version">
        <valueCode value="4.0.0" />
      </extension>
      <path value="DocumentReference.subject" />
      <short value="문서의 대상 (사람/사물)" />
      <definition value="문서가 무엇 혹은 누구에 대한 것인지를 나타냄. 문서는 개인(환자 또는 의료 practitioner[](healthcare prctitioner)), 기기(예 : 기계), 또는 피실험자 그룹(예 : 농장 동물 무리에 대한 문서 또는 공통 노출을 공유하는 환자 그룹)에 대한 문서일 수 있음." />
      <comment value="References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="DocumentReference.subject" />
        <max value="1" />
      </base>
      <type>
        <code value="Reference" />
        <targetProfile value="http://hl7.org/fhir/StructureDefinition/Patient" />
        <targetProfile value="http://hl7.org/fhir/StructureDefinition/Practitioner" />
        <targetProfile value="http://hl7.org/fhir/StructureDefinition/Group" />
        <targetProfile value="http://hl7.org/fhir/StructureDefinition/Device" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ref-1" />
        <severity value="error" />
        <human value="SHALL have a contained resource if a local reference is provided" />
        <expression value="reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))" />
        <xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Reference" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" />
      </mapping>
      <mapping>
        <identity value="workflow" />
        <map value="Event.subject" />
      </mapping>
      <mapping>
        <identity value="w5" />
        <map value="FiveWs.subject[x]" />
      </mapping>
      <mapping>
        <identity value="fhircomposition" />
        <map value="Composition.subject" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="PID-3 (No standard way to define a Practitioner or Group subject in HL7 v2 MDM message)" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value=".participation[typeCode=&quot;SBJ&quot;].role[typeCode=&quot;PAT&quot;]" />
      </mapping>
      <mapping>
        <identity value="xds" />
        <map value="DocumentEntry.patientId" />
      </mapping>
      <mapping>
        <identity value="cda" />
        <map value="ClinicalDocument/recordTarget/" />
      </mapping>
      <mapping>
        <identity value="w5" />
        <map value="FiveWs.subject" />
      </mapping>
    </element>
    <element id="DocumentReference.subject.id">
      <path value="DocumentReference.subject.id" />
      <representation value="xmlAttr" />
      <short value="Unique id for inter-element referencing" />
      <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="DocumentReference.subject.extension">
      <path value="DocumentReference.subject.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.subject.reference">
      <path value="DocumentReference.subject.reference" />
      <short value="문안 참조, 상대적, 내부적 혹은 절대적인 URL" />
      <definition value="다른 리소스(resource)을 찾을 수 있는 위치에 대한 참조를 의미함. 해당 참조는 service base URL에 상대적인 경우 상대 참조, 혹은 해당 리소스를 찾을 수 있는 위치인 절대 URL일 수 있음. 해당 참조는 버전에 따라 다를 수 있음. 해당 참조가 FHIR RESTful 서버가 아닌 경우, 버전에 따라 다른 것으로 간주함. 내부 구문 참조('#'으로 시작)는 포함되어 있는 리소스를 참조함." />
      <comment value="Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries.   Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure &quot;/[type]/[id]&quot; then it should be assumed that the reference is to a FHIR RESTful server." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Reference.reference" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <condition value="ref-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.subject.type">
      <path value="DocumentReference.subject.type" />
      <short value="참조(reference)가 참조하는 유형  (예. &quot;Patient&quot;)" />
      <definition value="참조 대상의 예상 형식임. Reference.type과 Reference.reference가 모두 채워지고 Reference.reference가 FHIR URL이면 두가지 모두 일치해야함. 유형은이 참조가 참조하는 유형 인 리소스 정의의 표준 URL임. 참조는 http://hl7.org/fhir/StructureDefinition/과 관련된 URL임. (예) &quot; 환자 &quot; http://hl7.org/fhir/StructureDefinition/Patient에 대한 참조. 절대 URL은 논리 모델에만 허용됨 (리소스가 아닌 논리 모델의 참조에서만 사용할 수 있음)." />
      <comment value="This element is used to indicate the type of  the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Reference.type" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="uri" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="FHIRResourceTypeExt" />
        </extension>
        <strength value="extensible" />
        <description value="Aa resource (or, for logical models, the URI of the logical model)." />
        <valueSet value="http://hl7.org/fhir/ValueSet/resource-types" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.subject.identifier">
      <path value="DocumentReference.subject.identifier" />
      <short value="문안 참조를 알 수 없는 경우의 논리 참조 (logical reference)" />
      <definition value="대상 리소스의 식별자. 이것은 다른 리소스를 직접 참조할 방법이 없을 때 사용- 해당 앤티티(entity)가 FHIR 서버를 통해 사용할 수 없거나  리소스 작성자가 알려진 식별자를 실제 위치로 변활할 방법이 없기 때문에 이 방법이 사용됨. Reference.identifier가 실제로 FHIR 인스턴스로 노출되는 것을 가르킬(point) 필요는 없지만, FHIR 인스턴스로 노출될 것으로 예상되는 비즈니스 개념을 가리켜야하며, 해당 인스턴스는 참조가 허용되는 FHIR 리소스 유형이여야함." />
      <comment value="When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. &#xA;&#xA;When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference&#xA;&#xA;Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.&#xA;&#xA;Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference.  For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport).  One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any)." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Reference.identifier" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="Identifier" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX / EI (occasionally, more often EI maps to a resource id or a URL)" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs.  Also maps to Role[classCode=IDENT]" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="Identifier" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value=".identifier" />
      </mapping>
    </element>
    <element id="DocumentReference.subject.identifier.id">
      <path value="DocumentReference.subject.identifier.id" />
      <representation value="xmlAttr" />
      <short value="Unique id for inter-element referencing" />
      <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="DocumentReference.subject.identifier.extension">
      <path value="DocumentReference.subject.identifier.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.subject.identifier.use">
      <path value="DocumentReference.subject.identifier.use" />
      <short value="usual | official | temp | secondary | old (If known)" />
      <definition value="해당 식별자의 목적" />
      <comment value="Applications can assume that an identifier is permanent unless it explicitly says that it is temporary." />
      <requirements value="Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.use" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="code" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isModifier value="true" />
      <isModifierReason value="This is labeled as &quot;Is Modifier&quot; because applications should not mistake a temporary id for a permanent one." />
      <isSummary value="true" />
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="IdentifierUse" />
        </extension>
        <strength value="required" />
        <description value="Identifies the purpose for this identifier, if known ." />
        <valueSet value="http://hl7.org/fhir/ValueSet/identifier-use|4.0.1" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="N/A" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="Role.code or implied by context" />
      </mapping>
    </element>
    <element id="DocumentReference.subject.identifier.type">
      <path value="DocumentReference.subject.identifier.type" />
      <short value="식별자에 대한 설명" />
      <definition value="특정 목적으로 사용되는 식별자를 결정하기 위해 사용하는 식별자의 코드 유형을 나타냄." />
      <comment value="This element deals only with general categories of identifiers.  It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage.   Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type." />
      <requirements value="Allows users to make use of identifiers when the identifier system is not known." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.type" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="CodeableConcept" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="IdentifierType" />
        </extension>
        <strength value="extensible" />
        <description value="A coded type for an identifier that can be used to determine which identifier to use for a specific purpose." />
        <valueSet value="http://hl7.org/fhir/ValueSet/identifier-type" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CE/CNE/CWE" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CD" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept rdfs:subClassOf dt:CD" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.5" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="Role.code or implied by context" />
      </mapping>
    </element>
    <element id="DocumentReference.subject.identifier.type.id">
      <path value="DocumentReference.subject.identifier.type.id" />
      <representation value="xmlAttr" />
      <short value="Unique id for inter-element referencing" />
      <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="DocumentReference.subject.identifier.type.extension">
      <path value="DocumentReference.subject.identifier.type.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.subject.identifier.type.coding">
      <path value="DocumentReference.subject.identifier.type.coding" />
      <short value="전문용어체계(terminology system)에 의해 정의된 코드" />
      <definition value="전문용어체계(terminology system)에 의해 정의된 코드를 참조" />
      <comment value="Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information.  Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true." />
      <requirements value="Allows for alternative encodings within a code system, and translations to other code systems." />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="CodeableConcept.coding" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Coding" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CE/CNE/CWE subset one of the sets of component 1-3 or 4-6" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CV" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding rdfs:subClassOf dt:CDCoding" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.1-8, C*E.10-22" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="union(., ./translation)" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding" />
      </mapping>
    </element>
    <element id="DocumentReference.subject.identifier.type.coding.id">
      <path value="DocumentReference.subject.identifier.type.coding.id" />
      <representation value="xmlAttr" />
      <short value="Unique id for inter-element referencing" />
      <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="DocumentReference.subject.identifier.type.coding.extension">
      <path value="DocumentReference.subject.identifier.type.coding.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.subject.identifier.type.coding.system">
      <path value="DocumentReference.subject.identifier.type.coding.system" />
      <short value="해당 전문용어체계(terminology system)의 식별" />
      <definition value="코드에서 기호의 의미를 정의하는 CodeSystem[코드시스템]를 식별" />
      <comment value="The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...).  OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously." />
      <requirements value="Need to be unambiguous about the source of the definition of the symbol." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.system" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="uri" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.3" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./codeSystem" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem" />
      </mapping>
    </element>
    <element id="DocumentReference.subject.identifier.type.coding.version">
      <path value="DocumentReference.subject.identifier.type.coding.version" />
      <short value="해당 시스템의 버전 정보 - 필요한 경우" />
      <definition value="해당 코드를 선택한 시점에 사용된 코드 시스템의 버전임. 올바로 관리된 코드 시스템은 코드의 의미가 버전과 관계없이 일관적이므로 버전을 보고할 필요가 없음. 그러나 코드 시스템의 관리 상태는 지속적으로 보장할 수 없는 부분이며, 코드의 의미가 일관적임을 보장할 수 없는 경우 버전이 교체되어야 함." />
      <comment value="Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.version" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.7" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./codeSystemVersion" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion" />
      </mapping>
    </element>
    <element id="DocumentReference.subject.identifier.type.coding.code">
      <path value="DocumentReference.subject.identifier.type.coding.code" />
      <short value="시스템에 정의된 구문(syntax)의 기호(symbol)" />
      <definition value="시스템에 정의된 구문의 기호. 기호는 CodeSystem[코드시스템]에 의해 정의된 구문에서 미리 정의된 코드 또는 표현(expression)일 수 있음. (예: post-coordination)" />
      <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" />
      <requirements value="Need to refer to a particular code in the system." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.code" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="code" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.1" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./code" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code" />
      </mapping>
    </element>
    <element id="DocumentReference.subject.identifier.type.coding.display">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="DocumentReference.subject.identifier.type.coding.display" />
      <short value="시스템에 정의된 표현" />
      <definition value="시스템 내 코드의 의미를 시스템의 규칙에 따라 표현한 것을 의미함." />
      <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" />
      <requirements value="Need to be able to carry a human-readable meaning of the code for readers that do not know  the system." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.display" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.2 - but note this is not well followed" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CV.displayName" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName" />
      </mapping>
    </element>
    <element id="DocumentReference.subject.identifier.type.coding.userSelected">
      <path value="DocumentReference.subject.identifier.type.coding.userSelected" />
      <short value="해당 코딩 방법이 사용자에 의해 직접 선택되었는지 여부" />
      <definition value="해당 코딩 방법이 사용자에 의해 직접 선택되었음을 나타냄. 즉, 선택 가능한 항목 (코드 혹은 디스플레이) 목록에 존재하지 않음을 나타냄." />
      <comment value="Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely." />
      <requirements value="This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.userSelected" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="boolean" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="Sometimes implied by being first" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CD.codingRationale" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map;   fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [     fhir:source &quot;true&quot;;     fhir:target dt:CDCoding.codingRationale\#O   ]" />
      </mapping>
    </element>
    <element id="DocumentReference.subject.identifier.type.text">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="DocumentReference.subject.identifier.type.text" />
      <short value="개념에 대한 일반 텍스트 묘사" />
      <definition value="데이터를 입력한 사용자의 입장에서 보거나/선택하거나/언급한대로의 개념, 혹은 사용자가 의도한 의미를 사람이 사용하는 언어로 표현한 것임." />
      <comment value="Very often the text is the same as a displayName of one of the codings." />
      <requirements value="The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="CodeableConcept.text" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.9. But note many systems use C*E.2 for this" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./originalText[mediaType/code=&quot;text/plain&quot;]/data" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText" />
      </mapping>
    </element>
    <element id="DocumentReference.subject.identifier.system">
      <path value="DocumentReference.subject.identifier.system" />
      <short value="식별자 값의 네임스페이스(namespace)" />
      <definition value="설정값에 대한 네임 스페이스 (namespace), 즉 고유한 설정값을 설명하는 URL을 설정함." />
      <comment value="Identifier.system is always case sensitive." />
      <requirements value="There are many sets  of identifiers.  To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.system" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="uri" />
      </type>
      <example>
        <label value="General" />
        <valueUri value="http://www.acme.com/identifiers/patient" />
      </example>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.4 / EI-2-4" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="II.root or Role.id.root" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="./IdentifierType" />
      </mapping>
    </element>
    <element id="DocumentReference.subject.identifier.value">
      <path value="DocumentReference.subject.identifier.value" />
      <short value="고유 설정값" />
      <definition value="일반적으로 식별자의 사용과와 관련이 있으며, 시스템 컨텍스트 (context) 내에서 고유한 식별자의 일부분임." />
      <comment value="If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986.  The value's primary purpose is computational mapping.  As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.)  A value formatted for human display can be conveyed using the [Rendered Value extension](extension-rendered-value.html). Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.value" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <example>
        <label value="General" />
        <valueString value="123456" />
      </example>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.1 / EI.1" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root)" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="./Value" />
      </mapping>
    </element>
    <element id="DocumentReference.subject.identifier.period">
      <path value="DocumentReference.subject.identifier.period" />
      <short value="식별자의 유효 기간" />
      <definition value="식별자가 사용 가능했거나 가능한 기간을 나타냄." />
      <comment value="A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. &quot;the patient was an inpatient of the hospital for this time range&quot;) or one value from the range applies (e.g. &quot;give to the patient between these two times&quot;).&#xA;&#xA;Period is not used for a duration (a measure of elapsed time). See [Duration](datatypes.html#Duration)." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.period" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="Period" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="per-1" />
        <severity value="error" />
        <human value="If present, start SHALL have a lower value than end" />
        <expression value="start.hasValue().not() or end.hasValue().not() or (start &lt;= end)" />
        <xpath value="not(exists(f:start/@value)) or not(exists(f:end/@value)) or (xs:dateTime(f:start/@value) &lt;= xs:dateTime(f:end/@value))" />
        <source value="http://hl7.org/fhir/StructureDefinition/Period" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="DR" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="IVL&lt;TS&gt;[lowClosed=&quot;true&quot; and highClosed=&quot;true&quot;] or URG&lt;TS&gt;[lowClosed=&quot;true&quot; and highClosed=&quot;true&quot;]" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.7 + CX.8" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="Role.effectiveTime or implied by context" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="./StartDate and ./EndDate" />
      </mapping>
    </element>
    <element id="DocumentReference.subject.identifier.period.id">
      <path value="DocumentReference.subject.identifier.period.id" />
      <representation value="xmlAttr" />
      <short value="Unique id for inter-element referencing" />
      <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="DocumentReference.subject.identifier.period.extension">
      <path value="DocumentReference.subject.identifier.period.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.subject.identifier.period.start">
      <path value="DocumentReference.subject.identifier.period.start" />
      <short value="해당 유효 기간의 시작 시점 (설정된 날짜 포함)" />
      <definition value="해당 유효 기간이 시작되는 시점을 나타냄. 유효 기간은 시작 시점으로 설정된 날짜를 포함함." />
      <comment value="If the low element is missing, the meaning is that the low boundary is not known." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Period.start" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="dateTime" />
      </type>
      <condition value="ele-1" />
      <condition value="per-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="DR.1" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./low" />
      </mapping>
    </element>
    <element id="DocumentReference.subject.identifier.period.end">
      <path value="DocumentReference.subject.identifier.period.end" />
      <short value="해당 유효 기간의 종료 시점 (설정된 날짜 포함)" />
      <definition value="기간의 종료. 기간의 종료가 누락된 경우, 인스턴스가 생성될 때 끝이 알려지거나 계획되지 않았음을 의미함. 시작일은 과거일 수 있고 종료일은 미래일 수 있음. 이는 해당 기간이 해당 시간에 종료될 예정임을 의미함" />
      <comment value="The high value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has an end value of 2012-02-03." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Period.end" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="dateTime" />
      </type>
      <meaningWhenMissing value="If the end of the period is missing, it means that the period is ongoing" />
      <condition value="ele-1" />
      <condition value="per-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="DR.2" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./high" />
      </mapping>
    </element>
    <element id="DocumentReference.subject.identifier.assigner">
      <path value="DocumentReference.subject.identifier.assigner" />
      <short value="식별자를 발급한 조직 (단순 텍스트 기입 가능)" />
      <definition value="식별자를 발급하고 관리하는 조직을 나타냄." />
      <comment value="The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.assigner" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="Reference" />
        <targetProfile value="http://hl7.org/fhir/StructureDefinition/Organization" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ref-1" />
        <severity value="error" />
        <human value="SHALL have a contained resource if a local reference is provided" />
        <expression value="reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))" />
        <xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Reference" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.4 / (CX.4,CX.9,CX.10)" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="II.assigningAuthorityName but note that this is an improper use by the definition of the field.  Also Role.scoper" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="./IdentifierIssuingAuthority" />
      </mapping>
    </element>
    <element id="DocumentReference.subject.display">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="DocumentReference.subject.display" />
      <short value="해당 리소스를 대체하는 텍스트 설명" />
      <definition value="리소스 참조 외에도 리소스를 식별하기 위한 일반 텍스트 설명임." />
      <comment value="This is generally not the same as the Resource.text of the referenced resource.  The purpose is to identify what's being referenced, not to fully describe it." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Reference.display" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.date">
      <path value="DocumentReference.date" />
      <short value="DocumentReference[]가 생성된 시점" />
      <definition value="DocumentReference[]가 생성된 시점" />
      <comment value="참조/인덱싱 (Reference/indexing) 시간은 버전 추적, 구성 및 검색에 사용 됨." />
      <alias value="indexed" />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="DocumentReference.date" />
        <max value="1" />
      </base>
      <type>
        <code value="instant" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="workflow" />
        <map value="Event.occurrence[x]" />
      </mapping>
      <mapping>
        <identity value="w5" />
        <map value="FiveWs.recorded" />
      </mapping>
      <mapping>
        <identity value="fhircomposition" />
        <map value="Composition.date" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value=".availabilityTime[type=&quot;TS&quot;]" />
      </mapping>
    </element>
    <element id="DocumentReference.author">
      <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status">
        <valueCode value="normative" />
      </extension>
      <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version">
        <valueCode value="4.0.0" />
      </extension>
      <path value="DocumentReference.author" />
      <short value="문서에 권한이 있는 사람 혹은 대상" />
      <definition value="문서에 정보를 추가할 책임이 있는 사용자를 식별함." />
      <comment value="실제 데이터 입력을 수행한 사람 (예: 타자기 사용자(typist)) 또는 소스(정보제공자)가 반드시 필요하진 않음." />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="DocumentReference.author" />
      </base>
      <type>
        <code value="Reference" />
        <targetProfile value="http://hl7.org/fhir/StructureDefinition/Practitioner" />
        <targetProfile value="http://hl7.org/fhir/StructureDefinition/PractitionerRole" />
        <targetProfile value="http://hl7.org/fhir/StructureDefinition/Organization" />
        <targetProfile value="http://hl7.org/fhir/StructureDefinition/Device" />
        <targetProfile value="http://hl7.org/fhir/StructureDefinition/Patient" />
        <targetProfile value="http://hl7.org/fhir/StructureDefinition/RelatedPerson" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ref-1" />
        <severity value="error" />
        <human value="SHALL have a contained resource if a local reference is provided" />
        <expression value="reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))" />
        <xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Reference" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" />
      </mapping>
      <mapping>
        <identity value="workflow" />
        <map value="Event.performer.actor" />
      </mapping>
      <mapping>
        <identity value="fhircomposition" />
        <map value="Composition.author" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="TXA-9 (No standard way to indicate a Device in HL7 v2 MDM message)" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value=".participation[typeCode=&quot;AUT&quot;].role[classCode=&quot;ASSIGNED&quot;]" />
      </mapping>
      <mapping>
        <identity value="xds" />
        <map value="DocumentEntry.author" />
      </mapping>
      <mapping>
        <identity value="cda" />
        <map value="ClinicalDocument/author" />
      </mapping>
    </element>
    <element id="DocumentReference.author.id">
      <path value="DocumentReference.author.id" />
      <representation value="xmlAttr" />
      <short value="Unique id for inter-element referencing" />
      <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="DocumentReference.author.extension">
      <path value="DocumentReference.author.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.author.reference">
      <path value="DocumentReference.author.reference" />
      <short value="문안 참조, 상대적, 내부적 혹은 절대적인 URL" />
      <definition value="다른 리소스(resource)을 찾을 수 있는 위치에 대한 참조를 의미함. 해당 참조는 service base URL에 상대적인 경우 상대 참조, 혹은 해당 리소스를 찾을 수 있는 위치인 절대 URL일 수 있음. 해당 참조는 버전에 따라 다를 수 있음. 해당 참조가 FHIR RESTful 서버가 아닌 경우, 버전에 따라 다른 것으로 간주함. 내부 구문 참조('#'으로 시작)는 포함되어 있는 리소스를 참조함." />
      <comment value="Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries.   Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure &quot;/[type]/[id]&quot; then it should be assumed that the reference is to a FHIR RESTful server." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Reference.reference" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <condition value="ref-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.author.type">
      <path value="DocumentReference.author.type" />
      <short value="참조(reference)가 참조하는 유형  (예. &quot;Patient&quot;)" />
      <definition value="참조 대상의 예상 형식임. Reference.type과 Reference.reference가 모두 채워지고 Reference.reference가 FHIR URL이면 두가지 모두 일치해야함. 유형은이 참조가 참조하는 유형 인 리소스 정의의 표준 URL임. 참조는 http://hl7.org/fhir/StructureDefinition/과 관련된 URL임. (예) &quot; 환자 &quot; http://hl7.org/fhir/StructureDefinition/Patient에 대한 참조. 절대 URL은 논리 모델에만 허용됨 (리소스가 아닌 논리 모델의 참조에서만 사용할 수 있음)." />
      <comment value="This element is used to indicate the type of  the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Reference.type" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="uri" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="FHIRResourceTypeExt" />
        </extension>
        <strength value="extensible" />
        <description value="Aa resource (or, for logical models, the URI of the logical model)." />
        <valueSet value="http://hl7.org/fhir/ValueSet/resource-types" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.author.identifier">
      <path value="DocumentReference.author.identifier" />
      <short value="문안 참조를 알 수 없는 경우의 논리 참조 (logical reference)" />
      <definition value="대상 리소스의 식별자. 이것은 다른 리소스를 직접 참조할 방법이 없을 때 사용- 해당 앤티티(entity)가 FHIR 서버를 통해 사용할 수 없거나  리소스 작성자가 알려진 식별자를 실제 위치로 변활할 방법이 없기 때문에 이 방법이 사용됨. Reference.identifier가 실제로 FHIR 인스턴스로 노출되는 것을 가르킬(point) 필요는 없지만, FHIR 인스턴스로 노출될 것으로 예상되는 비즈니스 개념을 가리켜야하며, 해당 인스턴스는 참조가 허용되는 FHIR 리소스 유형이여야함." />
      <comment value="When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. &#xA;&#xA;When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference&#xA;&#xA;Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.&#xA;&#xA;Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference.  For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport).  One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any)." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Reference.identifier" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="Identifier" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX / EI (occasionally, more often EI maps to a resource id or a URL)" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs.  Also maps to Role[classCode=IDENT]" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="Identifier" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value=".identifier" />
      </mapping>
    </element>
    <element id="DocumentReference.author.identifier.id">
      <path value="DocumentReference.author.identifier.id" />
      <representation value="xmlAttr" />
      <short value="Unique id for inter-element referencing" />
      <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="DocumentReference.author.identifier.extension">
      <path value="DocumentReference.author.identifier.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.author.identifier.use">
      <path value="DocumentReference.author.identifier.use" />
      <short value="usual | official | temp | secondary | old (If known)" />
      <definition value="해당 식별자의 목적" />
      <comment value="Applications can assume that an identifier is permanent unless it explicitly says that it is temporary." />
      <requirements value="Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.use" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="code" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isModifier value="true" />
      <isModifierReason value="This is labeled as &quot;Is Modifier&quot; because applications should not mistake a temporary id for a permanent one." />
      <isSummary value="true" />
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="IdentifierUse" />
        </extension>
        <strength value="required" />
        <description value="Identifies the purpose for this identifier, if known ." />
        <valueSet value="http://hl7.org/fhir/ValueSet/identifier-use|4.0.1" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="N/A" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="Role.code or implied by context" />
      </mapping>
    </element>
    <element id="DocumentReference.author.identifier.type">
      <path value="DocumentReference.author.identifier.type" />
      <short value="식별자에 대한 설명" />
      <definition value="특정 목적으로 사용되는 식별자를 결정하기 위해 사용하는 식별자의 코드 유형을 나타냄." />
      <comment value="This element deals only with general categories of identifiers.  It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage.   Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type." />
      <requirements value="Allows users to make use of identifiers when the identifier system is not known." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.type" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="CodeableConcept" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="IdentifierType" />
        </extension>
        <strength value="extensible" />
        <description value="A coded type for an identifier that can be used to determine which identifier to use for a specific purpose." />
        <valueSet value="http://hl7.org/fhir/ValueSet/identifier-type" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CE/CNE/CWE" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CD" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept rdfs:subClassOf dt:CD" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.5" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="Role.code or implied by context" />
      </mapping>
    </element>
    <element id="DocumentReference.author.identifier.type.id">
      <path value="DocumentReference.author.identifier.type.id" />
      <representation value="xmlAttr" />
      <short value="Unique id for inter-element referencing" />
      <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="DocumentReference.author.identifier.type.extension">
      <path value="DocumentReference.author.identifier.type.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.author.identifier.type.coding">
      <path value="DocumentReference.author.identifier.type.coding" />
      <short value="전문용어체계(terminology system)에 의해 정의된 코드" />
      <definition value="전문용어체계(terminology system)에 의해 정의된 코드를 참조" />
      <comment value="Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information.  Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true." />
      <requirements value="Allows for alternative encodings within a code system, and translations to other code systems." />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="CodeableConcept.coding" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Coding" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CE/CNE/CWE subset one of the sets of component 1-3 or 4-6" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CV" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding rdfs:subClassOf dt:CDCoding" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.1-8, C*E.10-22" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="union(., ./translation)" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding" />
      </mapping>
    </element>
    <element id="DocumentReference.author.identifier.type.coding.id">
      <path value="DocumentReference.author.identifier.type.coding.id" />
      <representation value="xmlAttr" />
      <short value="Unique id for inter-element referencing" />
      <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="DocumentReference.author.identifier.type.coding.extension">
      <path value="DocumentReference.author.identifier.type.coding.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.author.identifier.type.coding.system">
      <path value="DocumentReference.author.identifier.type.coding.system" />
      <short value="해당 전문용어체계(terminology system)의 식별" />
      <definition value="코드에서 기호의 의미를 정의하는 CodeSystem[코드시스템]를 식별" />
      <comment value="The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...).  OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously." />
      <requirements value="Need to be unambiguous about the source of the definition of the symbol." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.system" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="uri" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.3" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./codeSystem" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem" />
      </mapping>
    </element>
    <element id="DocumentReference.author.identifier.type.coding.version">
      <path value="DocumentReference.author.identifier.type.coding.version" />
      <short value="해당 시스템의 버전 정보 - 필요한 경우" />
      <definition value="해당 코드를 선택한 시점에 사용된 코드 시스템의 버전임. 올바로 관리된 코드 시스템은 코드의 의미가 버전과 관계없이 일관적이므로 버전을 보고할 필요가 없음. 그러나 코드 시스템의 관리 상태는 지속적으로 보장할 수 없는 부분이며, 코드의 의미가 일관적임을 보장할 수 없는 경우 버전이 교체되어야 함." />
      <comment value="Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.version" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.7" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./codeSystemVersion" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion" />
      </mapping>
    </element>
    <element id="DocumentReference.author.identifier.type.coding.code">
      <path value="DocumentReference.author.identifier.type.coding.code" />
      <short value="시스템에 정의된 구문(syntax)의 기호(symbol)" />
      <definition value="시스템에 정의된 구문의 기호. 기호는 CodeSystem[코드시스템]에 의해 정의된 구문에서 미리 정의된 코드 또는 표현(expression)일 수 있음. (예: post-coordination)" />
      <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" />
      <requirements value="Need to refer to a particular code in the system." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.code" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="code" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.1" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./code" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code" />
      </mapping>
    </element>
    <element id="DocumentReference.author.identifier.type.coding.display">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="DocumentReference.author.identifier.type.coding.display" />
      <short value="시스템에 정의된 표현" />
      <definition value="시스템 내 코드의 의미를 시스템의 규칙에 따라 표현한 것을 의미함." />
      <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" />
      <requirements value="Need to be able to carry a human-readable meaning of the code for readers that do not know  the system." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.display" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.2 - but note this is not well followed" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CV.displayName" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName" />
      </mapping>
    </element>
    <element id="DocumentReference.author.identifier.type.coding.userSelected">
      <path value="DocumentReference.author.identifier.type.coding.userSelected" />
      <short value="해당 코딩 방법이 사용자에 의해 직접 선택되었는지 여부" />
      <definition value="해당 코딩 방법이 사용자에 의해 직접 선택되었음을 나타냄. 즉, 선택 가능한 항목 (코드 혹은 디스플레이) 목록에 존재하지 않음을 나타냄." />
      <comment value="Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely." />
      <requirements value="This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.userSelected" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="boolean" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="Sometimes implied by being first" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CD.codingRationale" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map;   fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [     fhir:source &quot;true&quot;;     fhir:target dt:CDCoding.codingRationale\#O   ]" />
      </mapping>
    </element>
    <element id="DocumentReference.author.identifier.type.text">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="DocumentReference.author.identifier.type.text" />
      <short value="개념에 대한 일반 텍스트 묘사" />
      <definition value="데이터를 입력한 사용자의 입장에서 보거나/선택하거나/언급한대로의 개념, 혹은 사용자가 의도한 의미를 사람이 사용하는 언어로 표현한 것임." />
      <comment value="Very often the text is the same as a displayName of one of the codings." />
      <requirements value="The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="CodeableConcept.text" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.9. But note many systems use C*E.2 for this" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./originalText[mediaType/code=&quot;text/plain&quot;]/data" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText" />
      </mapping>
    </element>
    <element id="DocumentReference.author.identifier.system">
      <path value="DocumentReference.author.identifier.system" />
      <short value="식별자 값의 네임스페이스(namespace)" />
      <definition value="설정값에 대한 네임 스페이스 (namespace), 즉 고유한 설정값을 설명하는 URL을 설정함." />
      <comment value="Identifier.system is always case sensitive." />
      <requirements value="There are many sets  of identifiers.  To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.system" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="uri" />
      </type>
      <example>
        <label value="General" />
        <valueUri value="http://www.acme.com/identifiers/patient" />
      </example>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.4 / EI-2-4" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="II.root or Role.id.root" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="./IdentifierType" />
      </mapping>
    </element>
    <element id="DocumentReference.author.identifier.value">
      <path value="DocumentReference.author.identifier.value" />
      <short value="고유 설정값" />
      <definition value="일반적으로 식별자의 사용과와 관련이 있으며, 시스템 컨텍스트 (context) 내에서 고유한 식별자의 일부분임." />
      <comment value="If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986.  The value's primary purpose is computational mapping.  As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.)  A value formatted for human display can be conveyed using the [Rendered Value extension](extension-rendered-value.html). Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.value" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <example>
        <label value="General" />
        <valueString value="123456" />
      </example>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.1 / EI.1" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root)" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="./Value" />
      </mapping>
    </element>
    <element id="DocumentReference.author.identifier.period">
      <path value="DocumentReference.author.identifier.period" />
      <short value="식별자의 유효 기간" />
      <definition value="식별자가 사용 가능했거나 가능한 기간을 나타냄." />
      <comment value="A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. &quot;the patient was an inpatient of the hospital for this time range&quot;) or one value from the range applies (e.g. &quot;give to the patient between these two times&quot;).&#xA;&#xA;Period is not used for a duration (a measure of elapsed time). See [Duration](datatypes.html#Duration)." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.period" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="Period" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="per-1" />
        <severity value="error" />
        <human value="If present, start SHALL have a lower value than end" />
        <expression value="start.hasValue().not() or end.hasValue().not() or (start &lt;= end)" />
        <xpath value="not(exists(f:start/@value)) or not(exists(f:end/@value)) or (xs:dateTime(f:start/@value) &lt;= xs:dateTime(f:end/@value))" />
        <source value="http://hl7.org/fhir/StructureDefinition/Period" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="DR" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="IVL&lt;TS&gt;[lowClosed=&quot;true&quot; and highClosed=&quot;true&quot;] or URG&lt;TS&gt;[lowClosed=&quot;true&quot; and highClosed=&quot;true&quot;]" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.7 + CX.8" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="Role.effectiveTime or implied by context" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="./StartDate and ./EndDate" />
      </mapping>
    </element>
    <element id="DocumentReference.author.identifier.period.id">
      <path value="DocumentReference.author.identifier.period.id" />
      <representation value="xmlAttr" />
      <short value="Unique id for inter-element referencing" />
      <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="DocumentReference.author.identifier.period.extension">
      <path value="DocumentReference.author.identifier.period.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.author.identifier.period.start">
      <path value="DocumentReference.author.identifier.period.start" />
      <short value="해당 유효 기간의 시작 시점 (설정된 날짜 포함)" />
      <definition value="해당 유효 기간이 시작되는 시점을 나타냄. 유효 기간은 시작 시점으로 설정된 날짜를 포함함." />
      <comment value="If the low element is missing, the meaning is that the low boundary is not known." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Period.start" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="dateTime" />
      </type>
      <condition value="ele-1" />
      <condition value="per-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="DR.1" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./low" />
      </mapping>
    </element>
    <element id="DocumentReference.author.identifier.period.end">
      <path value="DocumentReference.author.identifier.period.end" />
      <short value="해당 유효 기간의 종료 시점 (설정된 날짜 포함)" />
      <definition value="기간의 종료. 기간의 종료가 누락된 경우, 인스턴스가 생성될 때 끝이 알려지거나 계획되지 않았음을 의미함. 시작일은 과거일 수 있고 종료일은 미래일 수 있음. 이는 해당 기간이 해당 시간에 종료될 예정임을 의미함" />
      <comment value="The high value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has an end value of 2012-02-03." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Period.end" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="dateTime" />
      </type>
      <meaningWhenMissing value="If the end of the period is missing, it means that the period is ongoing" />
      <condition value="ele-1" />
      <condition value="per-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="DR.2" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./high" />
      </mapping>
    </element>
    <element id="DocumentReference.author.identifier.assigner">
      <path value="DocumentReference.author.identifier.assigner" />
      <short value="식별자를 발급한 조직 (단순 텍스트 기입 가능)" />
      <definition value="식별자를 발급하고 관리하는 조직을 나타냄." />
      <comment value="The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.assigner" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="Reference" />
        <targetProfile value="http://hl7.org/fhir/StructureDefinition/Organization" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ref-1" />
        <severity value="error" />
        <human value="SHALL have a contained resource if a local reference is provided" />
        <expression value="reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))" />
        <xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Reference" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.4 / (CX.4,CX.9,CX.10)" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="II.assigningAuthorityName but note that this is an improper use by the definition of the field.  Also Role.scoper" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="./IdentifierIssuingAuthority" />
      </mapping>
    </element>
    <element id="DocumentReference.author.display">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="DocumentReference.author.display" />
      <short value="해당 리소스를 대체하는 텍스트 설명" />
      <definition value="리소스 참조 외에도 리소스를 식별하기 위한 일반 텍스트 설명임." />
      <comment value="This is generally not the same as the Resource.text of the referenced resource.  The purpose is to identify what's being referenced, not to fully describe it." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Reference.display" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.authenticator">
      <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status">
        <valueCode value="normative" />
      </extension>
      <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version">
        <valueCode value="4.0.0" />
      </extension>
      <path value="DocumentReference.authenticator" />
      <short value="문서를 인증한 사람 혹은 대상" />
      <definition value="해당 문서의 유효성을 인증하는 개인 또는 조직." />
      <comment value="문서를 합법적으로 인증 또는 증명한 저자 기관 내의 참가자를 나타냄. 법적 인증은 법적 인증자가 문서에 손으로 혹은 전자적으로 서명했음을 의미함." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="DocumentReference.authenticator" />
        <max value="1" />
      </base>
      <type>
        <code value="Reference" />
        <targetProfile value="http://hl7.org/fhir/StructureDefinition/Practitioner" />
        <targetProfile value="http://hl7.org/fhir/StructureDefinition/PractitionerRole" />
        <targetProfile value="http://hl7.org/fhir/StructureDefinition/Organization" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ref-1" />
        <severity value="error" />
        <human value="SHALL have a contained resource if a local reference is provided" />
        <expression value="reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))" />
        <xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Reference" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" />
      </mapping>
      <mapping>
        <identity value="workflow" />
        <map value="Event.performer.actor" />
      </mapping>
      <mapping>
        <identity value="w5" />
        <map value="FiveWs.witness" />
      </mapping>
      <mapping>
        <identity value="fhircomposition" />
        <map value="Composition.attester" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="TXA-10" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value=".participation[typeCode=&quot;AUTHEN&quot;].role[classCode=&quot;ASSIGNED&quot;]" />
      </mapping>
      <mapping>
        <identity value="xds" />
        <map value="DocumentEntry.legalAuthenticator" />
      </mapping>
      <mapping>
        <identity value="cda" />
        <map value="ClinicalDocument/legalAuthenticator" />
      </mapping>
    </element>
    <element id="DocumentReference.authenticator.id">
      <path value="DocumentReference.authenticator.id" />
      <representation value="xmlAttr" />
      <short value="Unique id for inter-element referencing" />
      <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="DocumentReference.authenticator.extension">
      <path value="DocumentReference.authenticator.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.authenticator.reference">
      <path value="DocumentReference.authenticator.reference" />
      <short value="문안 참조, 상대적, 내부적 혹은 절대적인 URL" />
      <definition value="다른 리소스(resource)을 찾을 수 있는 위치에 대한 참조를 의미함. 해당 참조는 service base URL에 상대적인 경우 상대 참조, 혹은 해당 리소스를 찾을 수 있는 위치인 절대 URL일 수 있음. 해당 참조는 버전에 따라 다를 수 있음. 해당 참조가 FHIR RESTful 서버가 아닌 경우, 버전에 따라 다른 것으로 간주함. 내부 구문 참조('#'으로 시작)는 포함되어 있는 리소스를 참조함." />
      <comment value="Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries.   Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure &quot;/[type]/[id]&quot; then it should be assumed that the reference is to a FHIR RESTful server." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Reference.reference" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <condition value="ref-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.authenticator.type">
      <path value="DocumentReference.authenticator.type" />
      <short value="참조(reference)가 참조하는 유형  (예. &quot;Patient&quot;)" />
      <definition value="참조 대상의 예상 형식임. Reference.type과 Reference.reference가 모두 채워지고 Reference.reference가 FHIR URL이면 두가지 모두 일치해야함. 유형은이 참조가 참조하는 유형 인 리소스 정의의 표준 URL임. 참조는 http://hl7.org/fhir/StructureDefinition/과 관련된 URL임. (예) &quot; 환자 &quot; http://hl7.org/fhir/StructureDefinition/Patient에 대한 참조. 절대 URL은 논리 모델에만 허용됨 (리소스가 아닌 논리 모델의 참조에서만 사용할 수 있음)." />
      <comment value="This element is used to indicate the type of  the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Reference.type" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="uri" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="FHIRResourceTypeExt" />
        </extension>
        <strength value="extensible" />
        <description value="Aa resource (or, for logical models, the URI of the logical model)." />
        <valueSet value="http://hl7.org/fhir/ValueSet/resource-types" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.authenticator.identifier">
      <path value="DocumentReference.authenticator.identifier" />
      <short value="문안 참조를 알 수 없는 경우의 논리 참조 (logical reference)" />
      <definition value="대상 리소스의 식별자. 이것은 다른 리소스를 직접 참조할 방법이 없을 때 사용- 해당 앤티티(entity)가 FHIR 서버를 통해 사용할 수 없거나  리소스 작성자가 알려진 식별자를 실제 위치로 변활할 방법이 없기 때문에 이 방법이 사용됨. Reference.identifier가 실제로 FHIR 인스턴스로 노출되는 것을 가르킬(point) 필요는 없지만, FHIR 인스턴스로 노출될 것으로 예상되는 비즈니스 개념을 가리켜야하며, 해당 인스턴스는 참조가 허용되는 FHIR 리소스 유형이여야함." />
      <comment value="When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. &#xA;&#xA;When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference&#xA;&#xA;Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.&#xA;&#xA;Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference.  For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport).  One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any)." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Reference.identifier" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="Identifier" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX / EI (occasionally, more often EI maps to a resource id or a URL)" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs.  Also maps to Role[classCode=IDENT]" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="Identifier" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value=".identifier" />
      </mapping>
    </element>
    <element id="DocumentReference.authenticator.identifier.id">
      <path value="DocumentReference.authenticator.identifier.id" />
      <representation value="xmlAttr" />
      <short value="Unique id for inter-element referencing" />
      <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="DocumentReference.authenticator.identifier.extension">
      <path value="DocumentReference.authenticator.identifier.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.authenticator.identifier.use">
      <path value="DocumentReference.authenticator.identifier.use" />
      <short value="usual | official | temp | secondary | old (If known)" />
      <definition value="해당 식별자의 목적" />
      <comment value="Applications can assume that an identifier is permanent unless it explicitly says that it is temporary." />
      <requirements value="Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.use" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="code" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isModifier value="true" />
      <isModifierReason value="This is labeled as &quot;Is Modifier&quot; because applications should not mistake a temporary id for a permanent one." />
      <isSummary value="true" />
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="IdentifierUse" />
        </extension>
        <strength value="required" />
        <description value="Identifies the purpose for this identifier, if known ." />
        <valueSet value="http://hl7.org/fhir/ValueSet/identifier-use|4.0.1" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="N/A" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="Role.code or implied by context" />
      </mapping>
    </element>
    <element id="DocumentReference.authenticator.identifier.type">
      <path value="DocumentReference.authenticator.identifier.type" />
      <short value="식별자에 대한 설명" />
      <definition value="특정 목적으로 사용되는 식별자를 결정하기 위해 사용하는 식별자의 코드 유형을 나타냄." />
      <comment value="This element deals only with general categories of identifiers.  It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage.   Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type." />
      <requirements value="Allows users to make use of identifiers when the identifier system is not known." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.type" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="CodeableConcept" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="IdentifierType" />
        </extension>
        <strength value="extensible" />
        <description value="A coded type for an identifier that can be used to determine which identifier to use for a specific purpose." />
        <valueSet value="http://hl7.org/fhir/ValueSet/identifier-type" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CE/CNE/CWE" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CD" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept rdfs:subClassOf dt:CD" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.5" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="Role.code or implied by context" />
      </mapping>
    </element>
    <element id="DocumentReference.authenticator.identifier.type.id">
      <path value="DocumentReference.authenticator.identifier.type.id" />
      <representation value="xmlAttr" />
      <short value="Unique id for inter-element referencing" />
      <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="DocumentReference.authenticator.identifier.type.extension">
      <path value="DocumentReference.authenticator.identifier.type.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.authenticator.identifier.type.coding">
      <path value="DocumentReference.authenticator.identifier.type.coding" />
      <short value="전문용어체계(terminology system)에 의해 정의된 코드" />
      <definition value="전문용어체계(terminology system)에 의해 정의된 코드를 참조" />
      <comment value="Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information.  Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true." />
      <requirements value="Allows for alternative encodings within a code system, and translations to other code systems." />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="CodeableConcept.coding" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Coding" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CE/CNE/CWE subset one of the sets of component 1-3 or 4-6" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CV" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding rdfs:subClassOf dt:CDCoding" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.1-8, C*E.10-22" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="union(., ./translation)" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding" />
      </mapping>
    </element>
    <element id="DocumentReference.authenticator.identifier.type.coding.id">
      <path value="DocumentReference.authenticator.identifier.type.coding.id" />
      <representation value="xmlAttr" />
      <short value="Unique id for inter-element referencing" />
      <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="DocumentReference.authenticator.identifier.type.coding.extension">
      <path value="DocumentReference.authenticator.identifier.type.coding.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.authenticator.identifier.type.coding.system">
      <path value="DocumentReference.authenticator.identifier.type.coding.system" />
      <short value="해당 전문용어체계(terminology system)의 식별" />
      <definition value="코드에서 기호의 의미를 정의하는 CodeSystem[코드시스템]를 식별" />
      <comment value="The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...).  OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously." />
      <requirements value="Need to be unambiguous about the source of the definition of the symbol." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.system" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="uri" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.3" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./codeSystem" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem" />
      </mapping>
    </element>
    <element id="DocumentReference.authenticator.identifier.type.coding.version">
      <path value="DocumentReference.authenticator.identifier.type.coding.version" />
      <short value="해당 시스템의 버전 정보 - 필요한 경우" />
      <definition value="해당 코드를 선택한 시점에 사용된 코드 시스템의 버전임. 올바로 관리된 코드 시스템은 코드의 의미가 버전과 관계없이 일관적이므로 버전을 보고할 필요가 없음. 그러나 코드 시스템의 관리 상태는 지속적으로 보장할 수 없는 부분이며, 코드의 의미가 일관적임을 보장할 수 없는 경우 버전이 교체되어야 함." />
      <comment value="Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.version" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.7" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./codeSystemVersion" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion" />
      </mapping>
    </element>
    <element id="DocumentReference.authenticator.identifier.type.coding.code">
      <path value="DocumentReference.authenticator.identifier.type.coding.code" />
      <short value="시스템에 정의된 구문(syntax)의 기호(symbol)" />
      <definition value="시스템에 정의된 구문의 기호. 기호는 CodeSystem[코드시스템]에 의해 정의된 구문에서 미리 정의된 코드 또는 표현(expression)일 수 있음. (예: post-coordination)" />
      <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" />
      <requirements value="Need to refer to a particular code in the system." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.code" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="code" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.1" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./code" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code" />
      </mapping>
    </element>
    <element id="DocumentReference.authenticator.identifier.type.coding.display">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="DocumentReference.authenticator.identifier.type.coding.display" />
      <short value="시스템에 정의된 표현" />
      <definition value="시스템 내 코드의 의미를 시스템의 규칙에 따라 표현한 것을 의미함." />
      <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" />
      <requirements value="Need to be able to carry a human-readable meaning of the code for readers that do not know  the system." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.display" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.2 - but note this is not well followed" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CV.displayName" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName" />
      </mapping>
    </element>
    <element id="DocumentReference.authenticator.identifier.type.coding.userSelected">
      <path value="DocumentReference.authenticator.identifier.type.coding.userSelected" />
      <short value="해당 코딩 방법이 사용자에 의해 직접 선택되었는지 여부" />
      <definition value="해당 코딩 방법이 사용자에 의해 직접 선택되었음을 나타냄. 즉, 선택 가능한 항목 (코드 혹은 디스플레이) 목록에 존재하지 않음을 나타냄." />
      <comment value="Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely." />
      <requirements value="This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.userSelected" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="boolean" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="Sometimes implied by being first" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CD.codingRationale" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map;   fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [     fhir:source &quot;true&quot;;     fhir:target dt:CDCoding.codingRationale\#O   ]" />
      </mapping>
    </element>
    <element id="DocumentReference.authenticator.identifier.type.text">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="DocumentReference.authenticator.identifier.type.text" />
      <short value="개념에 대한 일반 텍스트 묘사" />
      <definition value="데이터를 입력한 사용자의 입장에서 보거나/선택하거나/언급한대로의 개념, 혹은 사용자가 의도한 의미를 사람이 사용하는 언어로 표현한 것임." />
      <comment value="Very often the text is the same as a displayName of one of the codings." />
      <requirements value="The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="CodeableConcept.text" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.9. But note many systems use C*E.2 for this" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./originalText[mediaType/code=&quot;text/plain&quot;]/data" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText" />
      </mapping>
    </element>
    <element id="DocumentReference.authenticator.identifier.system">
      <path value="DocumentReference.authenticator.identifier.system" />
      <short value="식별자 값의 네임스페이스(namespace)" />
      <definition value="설정값에 대한 네임 스페이스 (namespace), 즉 고유한 설정값을 설명하는 URL을 설정함." />
      <comment value="Identifier.system is always case sensitive." />
      <requirements value="There are many sets  of identifiers.  To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.system" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="uri" />
      </type>
      <example>
        <label value="General" />
        <valueUri value="http://www.acme.com/identifiers/patient" />
      </example>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.4 / EI-2-4" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="II.root or Role.id.root" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="./IdentifierType" />
      </mapping>
    </element>
    <element id="DocumentReference.authenticator.identifier.value">
      <path value="DocumentReference.authenticator.identifier.value" />
      <short value="고유 설정값" />
      <definition value="일반적으로 식별자의 사용과와 관련이 있으며, 시스템 컨텍스트 (context) 내에서 고유한 식별자의 일부분임." />
      <comment value="If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986.  The value's primary purpose is computational mapping.  As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.)  A value formatted for human display can be conveyed using the [Rendered Value extension](extension-rendered-value.html). Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.value" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <example>
        <label value="General" />
        <valueString value="123456" />
      </example>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.1 / EI.1" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root)" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="./Value" />
      </mapping>
    </element>
    <element id="DocumentReference.authenticator.identifier.period">
      <path value="DocumentReference.authenticator.identifier.period" />
      <short value="식별자의 유효 기간" />
      <definition value="식별자가 사용 가능했거나 가능한 기간을 나타냄." />
      <comment value="A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. &quot;the patient was an inpatient of the hospital for this time range&quot;) or one value from the range applies (e.g. &quot;give to the patient between these two times&quot;).&#xA;&#xA;Period is not used for a duration (a measure of elapsed time). See [Duration](datatypes.html#Duration)." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.period" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="Period" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="per-1" />
        <severity value="error" />
        <human value="If present, start SHALL have a lower value than end" />
        <expression value="start.hasValue().not() or end.hasValue().not() or (start &lt;= end)" />
        <xpath value="not(exists(f:start/@value)) or not(exists(f:end/@value)) or (xs:dateTime(f:start/@value) &lt;= xs:dateTime(f:end/@value))" />
        <source value="http://hl7.org/fhir/StructureDefinition/Period" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="DR" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="IVL&lt;TS&gt;[lowClosed=&quot;true&quot; and highClosed=&quot;true&quot;] or URG&lt;TS&gt;[lowClosed=&quot;true&quot; and highClosed=&quot;true&quot;]" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.7 + CX.8" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="Role.effectiveTime or implied by context" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="./StartDate and ./EndDate" />
      </mapping>
    </element>
    <element id="DocumentReference.authenticator.identifier.period.id">
      <path value="DocumentReference.authenticator.identifier.period.id" />
      <representation value="xmlAttr" />
      <short value="Unique id for inter-element referencing" />
      <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="DocumentReference.authenticator.identifier.period.extension">
      <path value="DocumentReference.authenticator.identifier.period.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.authenticator.identifier.period.start">
      <path value="DocumentReference.authenticator.identifier.period.start" />
      <short value="해당 유효 기간의 시작 시점 (설정된 날짜 포함)" />
      <definition value="해당 유효 기간이 시작되는 시점을 나타냄. 유효 기간은 시작 시점으로 설정된 날짜를 포함함." />
      <comment value="If the low element is missing, the meaning is that the low boundary is not known." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Period.start" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="dateTime" />
      </type>
      <condition value="ele-1" />
      <condition value="per-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="DR.1" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./low" />
      </mapping>
    </element>
    <element id="DocumentReference.authenticator.identifier.period.end">
      <path value="DocumentReference.authenticator.identifier.period.end" />
      <short value="해당 유효 기간의 종료 시점 (설정된 날짜 포함)" />
      <definition value="기간의 종료. 기간의 종료가 누락된 경우, 인스턴스가 생성될 때 끝이 알려지거나 계획되지 않았음을 의미함. 시작일은 과거일 수 있고 종료일은 미래일 수 있음. 이는 해당 기간이 해당 시간에 종료될 예정임을 의미함" />
      <comment value="The high value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has an end value of 2012-02-03." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Period.end" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="dateTime" />
      </type>
      <meaningWhenMissing value="If the end of the period is missing, it means that the period is ongoing" />
      <condition value="ele-1" />
      <condition value="per-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="DR.2" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./high" />
      </mapping>
    </element>
    <element id="DocumentReference.authenticator.identifier.assigner">
      <path value="DocumentReference.authenticator.identifier.assigner" />
      <short value="식별자를 발급한 조직 (단순 텍스트 기입 가능)" />
      <definition value="식별자를 발급하고 관리하는 조직을 나타냄." />
      <comment value="The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.assigner" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="Reference" />
        <targetProfile value="http://hl7.org/fhir/StructureDefinition/Organization" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ref-1" />
        <severity value="error" />
        <human value="SHALL have a contained resource if a local reference is provided" />
        <expression value="reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))" />
        <xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Reference" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.4 / (CX.4,CX.9,CX.10)" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="II.assigningAuthorityName but note that this is an improper use by the definition of the field.  Also Role.scoper" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="./IdentifierIssuingAuthority" />
      </mapping>
    </element>
    <element id="DocumentReference.authenticator.display">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="DocumentReference.authenticator.display" />
      <short value="해당 리소스를 대체하는 텍스트 설명" />
      <definition value="리소스 참조 외에도 리소스를 식별하기 위한 일반 텍스트 설명임." />
      <comment value="This is generally not the same as the Resource.text of the referenced resource.  The purpose is to identify what's being referenced, not to fully describe it." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Reference.display" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.custodian">
      <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status">
        <valueCode value="normative" />
      </extension>
      <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version">
        <valueCode value="4.0.0" />
      </extension>
      <path value="DocumentReference.custodian" />
      <short value="문서를 유지하는 조직" />
      <definition value="문서의 지속적인 유지관리 및 액세스(access)를 담당하는 조직 또는 그룹을 식별함." />
      <comment value="현재 버전, 문제보고 위치 등을 찾기 위해 이동할 논리적 조직 (소프트웨어 시스템, 공급업체 또는 부서)을 식별함. 이는 문서의 물리적 위치(URL, 디스크 드라이버 또는 서버)와는 다르며, 호스트는 다른 조직의 관리에 위임될 수 있음." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="DocumentReference.custodian" />
        <max value="1" />
      </base>
      <type>
        <code value="Reference" />
        <targetProfile value="http://hl7.org/fhir/StructureDefinition/Organization" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ref-1" />
        <severity value="error" />
        <human value="SHALL have a contained resource if a local reference is provided" />
        <expression value="reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))" />
        <xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Reference" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" />
      </mapping>
      <mapping>
        <identity value="workflow" />
        <map value="Event.performer.actor" />
      </mapping>
      <mapping>
        <identity value="fhircomposition" />
        <map value="Composition.custodian" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value=".participation[typeCode=&quot;RCV&quot;].role[classCode=&quot;CUST&quot;].scoper[classCode=&quot;ORG&quot; and determinerCode=&quot;INST&quot;]" />
      </mapping>
    </element>
    <element id="DocumentReference.custodian.id">
      <path value="DocumentReference.custodian.id" />
      <representation value="xmlAttr" />
      <short value="Unique id for inter-element referencing" />
      <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="DocumentReference.custodian.extension">
      <path value="DocumentReference.custodian.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.custodian.reference">
      <path value="DocumentReference.custodian.reference" />
      <short value="문안 참조, 상대적, 내부적 혹은 절대적인 URL" />
      <definition value="다른 리소스(resource)을 찾을 수 있는 위치에 대한 참조를 의미함. 해당 참조는 service base URL에 상대적인 경우 상대 참조, 혹은 해당 리소스를 찾을 수 있는 위치인 절대 URL일 수 있음. 해당 참조는 버전에 따라 다를 수 있음. 해당 참조가 FHIR RESTful 서버가 아닌 경우, 버전에 따라 다른 것으로 간주함. 내부 구문 참조('#'으로 시작)는 포함되어 있는 리소스를 참조함." />
      <comment value="Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries.   Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure &quot;/[type]/[id]&quot; then it should be assumed that the reference is to a FHIR RESTful server." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Reference.reference" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <condition value="ref-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.custodian.type">
      <path value="DocumentReference.custodian.type" />
      <short value="참조(reference)가 참조하는 유형  (예. &quot;Patient&quot;)" />
      <definition value="참조 대상의 예상 형식임. Reference.type과 Reference.reference가 모두 채워지고 Reference.reference가 FHIR URL이면 두가지 모두 일치해야함. 유형은이 참조가 참조하는 유형 인 리소스 정의의 표준 URL임. 참조는 http://hl7.org/fhir/StructureDefinition/과 관련된 URL임. (예) &quot; 환자 &quot; http://hl7.org/fhir/StructureDefinition/Patient에 대한 참조. 절대 URL은 논리 모델에만 허용됨 (리소스가 아닌 논리 모델의 참조에서만 사용할 수 있음)." />
      <comment value="This element is used to indicate the type of  the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Reference.type" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="uri" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="FHIRResourceTypeExt" />
        </extension>
        <strength value="extensible" />
        <description value="Aa resource (or, for logical models, the URI of the logical model)." />
        <valueSet value="http://hl7.org/fhir/ValueSet/resource-types" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.custodian.identifier">
      <path value="DocumentReference.custodian.identifier" />
      <short value="문안 참조를 알 수 없는 경우의 논리 참조 (logical reference)" />
      <definition value="대상 리소스의 식별자. 이것은 다른 리소스를 직접 참조할 방법이 없을 때 사용- 해당 앤티티(entity)가 FHIR 서버를 통해 사용할 수 없거나  리소스 작성자가 알려진 식별자를 실제 위치로 변활할 방법이 없기 때문에 이 방법이 사용됨. Reference.identifier가 실제로 FHIR 인스턴스로 노출되는 것을 가르킬(point) 필요는 없지만, FHIR 인스턴스로 노출될 것으로 예상되는 비즈니스 개념을 가리켜야하며, 해당 인스턴스는 참조가 허용되는 FHIR 리소스 유형이여야함." />
      <comment value="When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. &#xA;&#xA;When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference&#xA;&#xA;Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.&#xA;&#xA;Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference.  For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport).  One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any)." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Reference.identifier" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="Identifier" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX / EI (occasionally, more often EI maps to a resource id or a URL)" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs.  Also maps to Role[classCode=IDENT]" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="Identifier" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value=".identifier" />
      </mapping>
    </element>
    <element id="DocumentReference.custodian.identifier.id">
      <path value="DocumentReference.custodian.identifier.id" />
      <representation value="xmlAttr" />
      <short value="Unique id for inter-element referencing" />
      <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="DocumentReference.custodian.identifier.extension">
      <path value="DocumentReference.custodian.identifier.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.custodian.identifier.use">
      <path value="DocumentReference.custodian.identifier.use" />
      <short value="usual | official | temp | secondary | old (If known)" />
      <definition value="해당 식별자의 목적" />
      <comment value="Applications can assume that an identifier is permanent unless it explicitly says that it is temporary." />
      <requirements value="Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.use" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="code" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isModifier value="true" />
      <isModifierReason value="This is labeled as &quot;Is Modifier&quot; because applications should not mistake a temporary id for a permanent one." />
      <isSummary value="true" />
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="IdentifierUse" />
        </extension>
        <strength value="required" />
        <description value="Identifies the purpose for this identifier, if known ." />
        <valueSet value="http://hl7.org/fhir/ValueSet/identifier-use|4.0.1" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="N/A" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="Role.code or implied by context" />
      </mapping>
    </element>
    <element id="DocumentReference.custodian.identifier.type">
      <path value="DocumentReference.custodian.identifier.type" />
      <short value="식별자에 대한 설명" />
      <definition value="특정 목적으로 사용되는 식별자를 결정하기 위해 사용하는 식별자의 코드 유형을 나타냄." />
      <comment value="This element deals only with general categories of identifiers.  It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage.   Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type." />
      <requirements value="Allows users to make use of identifiers when the identifier system is not known." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.type" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="CodeableConcept" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="IdentifierType" />
        </extension>
        <strength value="extensible" />
        <description value="A coded type for an identifier that can be used to determine which identifier to use for a specific purpose." />
        <valueSet value="http://hl7.org/fhir/ValueSet/identifier-type" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CE/CNE/CWE" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CD" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept rdfs:subClassOf dt:CD" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.5" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="Role.code or implied by context" />
      </mapping>
    </element>
    <element id="DocumentReference.custodian.identifier.type.id">
      <path value="DocumentReference.custodian.identifier.type.id" />
      <representation value="xmlAttr" />
      <short value="Unique id for inter-element referencing" />
      <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="DocumentReference.custodian.identifier.type.extension">
      <path value="DocumentReference.custodian.identifier.type.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.custodian.identifier.type.coding">
      <path value="DocumentReference.custodian.identifier.type.coding" />
      <short value="전문용어체계(terminology system)에 의해 정의된 코드" />
      <definition value="전문용어체계(terminology system)에 의해 정의된 코드를 참조" />
      <comment value="Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information.  Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true." />
      <requirements value="Allows for alternative encodings within a code system, and translations to other code systems." />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="CodeableConcept.coding" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Coding" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CE/CNE/CWE subset one of the sets of component 1-3 or 4-6" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CV" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding rdfs:subClassOf dt:CDCoding" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.1-8, C*E.10-22" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="union(., ./translation)" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding" />
      </mapping>
    </element>
    <element id="DocumentReference.custodian.identifier.type.coding.id">
      <path value="DocumentReference.custodian.identifier.type.coding.id" />
      <representation value="xmlAttr" />
      <short value="Unique id for inter-element referencing" />
      <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="DocumentReference.custodian.identifier.type.coding.extension">
      <path value="DocumentReference.custodian.identifier.type.coding.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.custodian.identifier.type.coding.system">
      <path value="DocumentReference.custodian.identifier.type.coding.system" />
      <short value="해당 전문용어체계(terminology system)의 식별" />
      <definition value="코드에서 기호의 의미를 정의하는 CodeSystem[코드시스템]를 식별" />
      <comment value="The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...).  OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously." />
      <requirements value="Need to be unambiguous about the source of the definition of the symbol." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.system" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="uri" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.3" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./codeSystem" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem" />
      </mapping>
    </element>
    <element id="DocumentReference.custodian.identifier.type.coding.version">
      <path value="DocumentReference.custodian.identifier.type.coding.version" />
      <short value="해당 시스템의 버전 정보 - 필요한 경우" />
      <definition value="해당 코드를 선택한 시점에 사용된 코드 시스템의 버전임. 올바로 관리된 코드 시스템은 코드의 의미가 버전과 관계없이 일관적이므로 버전을 보고할 필요가 없음. 그러나 코드 시스템의 관리 상태는 지속적으로 보장할 수 없는 부분이며, 코드의 의미가 일관적임을 보장할 수 없는 경우 버전이 교체되어야 함." />
      <comment value="Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.version" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.7" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./codeSystemVersion" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion" />
      </mapping>
    </element>
    <element id="DocumentReference.custodian.identifier.type.coding.code">
      <path value="DocumentReference.custodian.identifier.type.coding.code" />
      <short value="시스템에 정의된 구문(syntax)의 기호(symbol)" />
      <definition value="시스템에 정의된 구문의 기호. 기호는 CodeSystem[코드시스템]에 의해 정의된 구문에서 미리 정의된 코드 또는 표현(expression)일 수 있음. (예: post-coordination)" />
      <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" />
      <requirements value="Need to refer to a particular code in the system." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.code" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="code" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.1" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./code" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code" />
      </mapping>
    </element>
    <element id="DocumentReference.custodian.identifier.type.coding.display">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="DocumentReference.custodian.identifier.type.coding.display" />
      <short value="시스템에 정의된 표현" />
      <definition value="시스템 내 코드의 의미를 시스템의 규칙에 따라 표현한 것을 의미함." />
      <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" />
      <requirements value="Need to be able to carry a human-readable meaning of the code for readers that do not know  the system." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.display" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.2 - but note this is not well followed" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CV.displayName" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName" />
      </mapping>
    </element>
    <element id="DocumentReference.custodian.identifier.type.coding.userSelected">
      <path value="DocumentReference.custodian.identifier.type.coding.userSelected" />
      <short value="해당 코딩 방법이 사용자에 의해 직접 선택되었는지 여부" />
      <definition value="해당 코딩 방법이 사용자에 의해 직접 선택되었음을 나타냄. 즉, 선택 가능한 항목 (코드 혹은 디스플레이) 목록에 존재하지 않음을 나타냄." />
      <comment value="Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely." />
      <requirements value="This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.userSelected" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="boolean" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="Sometimes implied by being first" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CD.codingRationale" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map;   fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [     fhir:source &quot;true&quot;;     fhir:target dt:CDCoding.codingRationale\#O   ]" />
      </mapping>
    </element>
    <element id="DocumentReference.custodian.identifier.type.text">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="DocumentReference.custodian.identifier.type.text" />
      <short value="개념에 대한 일반 텍스트 묘사" />
      <definition value="데이터를 입력한 사용자의 입장에서 보거나/선택하거나/언급한대로의 개념, 혹은 사용자가 의도한 의미를 사람이 사용하는 언어로 표현한 것임." />
      <comment value="Very often the text is the same as a displayName of one of the codings." />
      <requirements value="The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="CodeableConcept.text" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.9. But note many systems use C*E.2 for this" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./originalText[mediaType/code=&quot;text/plain&quot;]/data" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText" />
      </mapping>
    </element>
    <element id="DocumentReference.custodian.identifier.system">
      <path value="DocumentReference.custodian.identifier.system" />
      <short value="식별자 값의 네임스페이스(namespace)" />
      <definition value="설정값에 대한 네임 스페이스 (namespace), 즉 고유한 설정값을 설명하는 URL을 설정함." />
      <comment value="Identifier.system is always case sensitive." />
      <requirements value="There are many sets  of identifiers.  To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.system" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="uri" />
      </type>
      <example>
        <label value="General" />
        <valueUri value="http://www.acme.com/identifiers/patient" />
      </example>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.4 / EI-2-4" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="II.root or Role.id.root" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="./IdentifierType" />
      </mapping>
    </element>
    <element id="DocumentReference.custodian.identifier.value">
      <path value="DocumentReference.custodian.identifier.value" />
      <short value="고유 설정값" />
      <definition value="일반적으로 식별자의 사용과와 관련이 있으며, 시스템 컨텍스트 (context) 내에서 고유한 식별자의 일부분임." />
      <comment value="If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986.  The value's primary purpose is computational mapping.  As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.)  A value formatted for human display can be conveyed using the [Rendered Value extension](extension-rendered-value.html). Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.value" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <example>
        <label value="General" />
        <valueString value="123456" />
      </example>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.1 / EI.1" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root)" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="./Value" />
      </mapping>
    </element>
    <element id="DocumentReference.custodian.identifier.period">
      <path value="DocumentReference.custodian.identifier.period" />
      <short value="식별자의 유효 기간" />
      <definition value="식별자가 사용 가능했거나 가능한 기간을 나타냄." />
      <comment value="A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. &quot;the patient was an inpatient of the hospital for this time range&quot;) or one value from the range applies (e.g. &quot;give to the patient between these two times&quot;).&#xA;&#xA;Period is not used for a duration (a measure of elapsed time). See [Duration](datatypes.html#Duration)." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.period" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="Period" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="per-1" />
        <severity value="error" />
        <human value="If present, start SHALL have a lower value than end" />
        <expression value="start.hasValue().not() or end.hasValue().not() or (start &lt;= end)" />
        <xpath value="not(exists(f:start/@value)) or not(exists(f:end/@value)) or (xs:dateTime(f:start/@value) &lt;= xs:dateTime(f:end/@value))" />
        <source value="http://hl7.org/fhir/StructureDefinition/Period" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="DR" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="IVL&lt;TS&gt;[lowClosed=&quot;true&quot; and highClosed=&quot;true&quot;] or URG&lt;TS&gt;[lowClosed=&quot;true&quot; and highClosed=&quot;true&quot;]" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.7 + CX.8" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="Role.effectiveTime or implied by context" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="./StartDate and ./EndDate" />
      </mapping>
    </element>
    <element id="DocumentReference.custodian.identifier.period.id">
      <path value="DocumentReference.custodian.identifier.period.id" />
      <representation value="xmlAttr" />
      <short value="Unique id for inter-element referencing" />
      <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="DocumentReference.custodian.identifier.period.extension">
      <path value="DocumentReference.custodian.identifier.period.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.custodian.identifier.period.start">
      <path value="DocumentReference.custodian.identifier.period.start" />
      <short value="해당 유효 기간의 시작 시점 (설정된 날짜 포함)" />
      <definition value="해당 유효 기간이 시작되는 시점을 나타냄. 유효 기간은 시작 시점으로 설정된 날짜를 포함함." />
      <comment value="If the low element is missing, the meaning is that the low boundary is not known." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Period.start" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="dateTime" />
      </type>
      <condition value="ele-1" />
      <condition value="per-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="DR.1" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./low" />
      </mapping>
    </element>
    <element id="DocumentReference.custodian.identifier.period.end">
      <path value="DocumentReference.custodian.identifier.period.end" />
      <short value="해당 유효 기간의 종료 시점 (설정된 날짜 포함)" />
      <definition value="기간의 종료. 기간의 종료가 누락된 경우, 인스턴스가 생성될 때 끝이 알려지거나 계획되지 않았음을 의미함. 시작일은 과거일 수 있고 종료일은 미래일 수 있음. 이는 해당 기간이 해당 시간에 종료될 예정임을 의미함" />
      <comment value="The high value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has an end value of 2012-02-03." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Period.end" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="dateTime" />
      </type>
      <meaningWhenMissing value="If the end of the period is missing, it means that the period is ongoing" />
      <condition value="ele-1" />
      <condition value="per-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="DR.2" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./high" />
      </mapping>
    </element>
    <element id="DocumentReference.custodian.identifier.assigner">
      <path value="DocumentReference.custodian.identifier.assigner" />
      <short value="식별자를 발급한 조직 (단순 텍스트 기입 가능)" />
      <definition value="식별자를 발급하고 관리하는 조직을 나타냄." />
      <comment value="The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.assigner" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="Reference" />
        <targetProfile value="http://hl7.org/fhir/StructureDefinition/Organization" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ref-1" />
        <severity value="error" />
        <human value="SHALL have a contained resource if a local reference is provided" />
        <expression value="reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))" />
        <xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Reference" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.4 / (CX.4,CX.9,CX.10)" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="II.assigningAuthorityName but note that this is an improper use by the definition of the field.  Also Role.scoper" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="./IdentifierIssuingAuthority" />
      </mapping>
    </element>
    <element id="DocumentReference.custodian.display">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="DocumentReference.custodian.display" />
      <short value="해당 리소스를 대체하는 텍스트 설명" />
      <definition value="리소스 참조 외에도 리소스를 식별하기 위한 일반 텍스트 설명임." />
      <comment value="This is generally not the same as the Resource.text of the referenced resource.  The purpose is to identify what's being referenced, not to fully describe it." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Reference.display" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.relatesTo">
      <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status">
        <valueCode value="normative" />
      </extension>
      <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version">
        <valueCode value="4.0.0" />
      </extension>
      <path value="DocumentReference.relatesTo" />
      <short value="다른 문서와의 관계" />
      <definition value="해당 문서와 이미 존재하는 다른 DocumentReference[]와의 관계." />
      <comment value="다른 문서에 추가된 문서는 자체적으로 완전하지 않기 때문에 해당 요소는 수정자(modifier)로 레이블됨" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="DocumentReference.relatesTo" />
      </base>
      <type>
        <code value="BackboneElement" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="fhircomposition" />
        <map value="Composition.relatesTo" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value=".outboundRelationship" />
      </mapping>
      <mapping>
        <identity value="xds" />
        <map value="DocumentEntry Associations" />
      </mapping>
    </element>
    <element id="DocumentReference.relatesTo.id">
      <path value="DocumentReference.relatesTo.id" />
      <representation value="xmlAttr" />
      <short value="Unique id for inter-element referencing" />
      <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="DocumentReference.relatesTo.extension">
      <path value="DocumentReference.relatesTo.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.relatesTo.modifierExtension">
      <path value="DocumentReference.relatesTo.modifierExtension" />
      <short value="Extensions that cannot be ignored even if unrecognized" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.&#xA;&#xA;Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself)." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <requirements value="Modifier extensions allow for extensions that *cannot* be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored.  This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the [definition of modifier extensions](extensibility.html#modifierExtension)." />
      <alias value="extensions" />
      <alias value="user content" />
      <alias value="modifiers" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="BackboneElement.modifierExtension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <isModifier value="true" />
      <isModifierReason value="Modifier extensions are expected to modify the meaning or interpretation of the element that contains them" />
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.relatesTo.code">
      <path value="DocumentReference.relatesTo.code" />
      <short value="replaces | transforms | signs | appends" />
      <definition value="해당 문서와 다른 문서간의 관계 유형" />
      <comment value="해당 문서가 다른 문서를 추가하는 경우, 참조된 문서에 대한 접근 없이 문서를 완전히 이해할 수 없음." />
      <min value="1" />
      <max value="1" />
      <base>
        <path value="DocumentReference.relatesTo.code" />
        <min value="1" />
        <max value="1" />
      </base>
      <type>
        <code value="code" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="DocumentRelationshipType" />
        </extension>
        <strength value="required" />
        <description value="The type of relationship between documents." />
        <valueSet value="http://hl7.org/fhir/ValueSet/document-relationship-type|4.0.1" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="fhircomposition" />
        <map value="Composition.relatesTo.code" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value=".outboundRelationship.typeCode" />
      </mapping>
      <mapping>
        <identity value="xds" />
        <map value="DocumentEntry Associations type" />
      </mapping>
    </element>
    <element id="DocumentReference.relatesTo.target">
      <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status">
        <valueCode value="normative" />
      </extension>
      <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version">
        <valueCode value="4.0.0" />
      </extension>
      <path value="DocumentReference.relatesTo.target" />
      <short value="해당 관계의 초점" />
      <definition value="해당 관계의 대상(target) 문서" />
      <comment value="References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository." />
      <min value="1" />
      <max value="1" />
      <base>
        <path value="DocumentReference.relatesTo.target" />
        <min value="1" />
        <max value="1" />
      </base>
      <type>
        <code value="Reference" />
        <targetProfile value="http://hl7.org/fhir/StructureDefinition/DocumentReference" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ref-1" />
        <severity value="error" />
        <human value="SHALL have a contained resource if a local reference is provided" />
        <expression value="reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))" />
        <xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Reference" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" />
      </mapping>
      <mapping>
        <identity value="fhircomposition" />
        <map value="Composition.relatesTo.target" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value=".target[classCode=&quot;DOC&quot;, moodCode=&quot;EVN&quot;].id" />
      </mapping>
      <mapping>
        <identity value="xds" />
        <map value="DocumentEntry Associations reference" />
      </mapping>
    </element>
    <element id="DocumentReference.relatesTo.target.id">
      <path value="DocumentReference.relatesTo.target.id" />
      <representation value="xmlAttr" />
      <short value="Unique id for inter-element referencing" />
      <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="DocumentReference.relatesTo.target.extension">
      <path value="DocumentReference.relatesTo.target.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.relatesTo.target.reference">
      <path value="DocumentReference.relatesTo.target.reference" />
      <short value="문안 참조, 상대적, 내부적 혹은 절대적인 URL" />
      <definition value="다른 리소스(resource)을 찾을 수 있는 위치에 대한 참조를 의미함. 해당 참조는 service base URL에 상대적인 경우 상대 참조, 혹은 해당 리소스를 찾을 수 있는 위치인 절대 URL일 수 있음. 해당 참조는 버전에 따라 다를 수 있음. 해당 참조가 FHIR RESTful 서버가 아닌 경우, 버전에 따라 다른 것으로 간주함. 내부 구문 참조('#'으로 시작)는 포함되어 있는 리소스를 참조함." />
      <comment value="Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries.   Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure &quot;/[type]/[id]&quot; then it should be assumed that the reference is to a FHIR RESTful server." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Reference.reference" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <condition value="ref-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.relatesTo.target.type">
      <path value="DocumentReference.relatesTo.target.type" />
      <short value="참조(reference)가 참조하는 유형  (예. &quot;Patient&quot;)" />
      <definition value="참조 대상의 예상 형식임. Reference.type과 Reference.reference가 모두 채워지고 Reference.reference가 FHIR URL이면 두가지 모두 일치해야함. 유형은이 참조가 참조하는 유형 인 리소스 정의의 표준 URL임. 참조는 http://hl7.org/fhir/StructureDefinition/과 관련된 URL임. (예) &quot; 환자 &quot; http://hl7.org/fhir/StructureDefinition/Patient에 대한 참조. 절대 URL은 논리 모델에만 허용됨 (리소스가 아닌 논리 모델의 참조에서만 사용할 수 있음)." />
      <comment value="This element is used to indicate the type of  the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Reference.type" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="uri" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="FHIRResourceTypeExt" />
        </extension>
        <strength value="extensible" />
        <description value="Aa resource (or, for logical models, the URI of the logical model)." />
        <valueSet value="http://hl7.org/fhir/ValueSet/resource-types" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.relatesTo.target.identifier">
      <path value="DocumentReference.relatesTo.target.identifier" />
      <short value="문안 참조를 알 수 없는 경우의 논리 참조 (logical reference)" />
      <definition value="대상 리소스의 식별자. 이것은 다른 리소스를 직접 참조할 방법이 없을 때 사용- 해당 앤티티(entity)가 FHIR 서버를 통해 사용할 수 없거나  리소스 작성자가 알려진 식별자를 실제 위치로 변활할 방법이 없기 때문에 이 방법이 사용됨. Reference.identifier가 실제로 FHIR 인스턴스로 노출되는 것을 가르킬(point) 필요는 없지만, FHIR 인스턴스로 노출될 것으로 예상되는 비즈니스 개념을 가리켜야하며, 해당 인스턴스는 참조가 허용되는 FHIR 리소스 유형이여야함." />
      <comment value="When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. &#xA;&#xA;When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference&#xA;&#xA;Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.&#xA;&#xA;Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference.  For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport).  One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any)." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Reference.identifier" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="Identifier" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX / EI (occasionally, more often EI maps to a resource id or a URL)" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs.  Also maps to Role[classCode=IDENT]" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="Identifier" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value=".identifier" />
      </mapping>
    </element>
    <element id="DocumentReference.relatesTo.target.identifier.id">
      <path value="DocumentReference.relatesTo.target.identifier.id" />
      <representation value="xmlAttr" />
      <short value="Unique id for inter-element referencing" />
      <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="DocumentReference.relatesTo.target.identifier.extension">
      <path value="DocumentReference.relatesTo.target.identifier.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.relatesTo.target.identifier.use">
      <path value="DocumentReference.relatesTo.target.identifier.use" />
      <short value="usual | official | temp | secondary | old (If known)" />
      <definition value="해당 식별자의 목적" />
      <comment value="Applications can assume that an identifier is permanent unless it explicitly says that it is temporary." />
      <requirements value="Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.use" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="code" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isModifier value="true" />
      <isModifierReason value="This is labeled as &quot;Is Modifier&quot; because applications should not mistake a temporary id for a permanent one." />
      <isSummary value="true" />
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="IdentifierUse" />
        </extension>
        <strength value="required" />
        <description value="Identifies the purpose for this identifier, if known ." />
        <valueSet value="http://hl7.org/fhir/ValueSet/identifier-use|4.0.1" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="N/A" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="Role.code or implied by context" />
      </mapping>
    </element>
    <element id="DocumentReference.relatesTo.target.identifier.type">
      <path value="DocumentReference.relatesTo.target.identifier.type" />
      <short value="식별자에 대한 설명" />
      <definition value="특정 목적으로 사용되는 식별자를 결정하기 위해 사용하는 식별자의 코드 유형을 나타냄." />
      <comment value="This element deals only with general categories of identifiers.  It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage.   Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type." />
      <requirements value="Allows users to make use of identifiers when the identifier system is not known." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.type" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="CodeableConcept" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="IdentifierType" />
        </extension>
        <strength value="extensible" />
        <description value="A coded type for an identifier that can be used to determine which identifier to use for a specific purpose." />
        <valueSet value="http://hl7.org/fhir/ValueSet/identifier-type" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CE/CNE/CWE" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CD" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept rdfs:subClassOf dt:CD" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.5" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="Role.code or implied by context" />
      </mapping>
    </element>
    <element id="DocumentReference.relatesTo.target.identifier.type.id">
      <path value="DocumentReference.relatesTo.target.identifier.type.id" />
      <representation value="xmlAttr" />
      <short value="Unique id for inter-element referencing" />
      <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="DocumentReference.relatesTo.target.identifier.type.extension">
      <path value="DocumentReference.relatesTo.target.identifier.type.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.relatesTo.target.identifier.type.coding">
      <path value="DocumentReference.relatesTo.target.identifier.type.coding" />
      <short value="전문용어체계(terminology system)에 의해 정의된 코드" />
      <definition value="전문용어체계(terminology system)에 의해 정의된 코드를 참조" />
      <comment value="Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information.  Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true." />
      <requirements value="Allows for alternative encodings within a code system, and translations to other code systems." />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="CodeableConcept.coding" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Coding" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CE/CNE/CWE subset one of the sets of component 1-3 or 4-6" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CV" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding rdfs:subClassOf dt:CDCoding" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.1-8, C*E.10-22" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="union(., ./translation)" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding" />
      </mapping>
    </element>
    <element id="DocumentReference.relatesTo.target.identifier.type.coding.id">
      <path value="DocumentReference.relatesTo.target.identifier.type.coding.id" />
      <representation value="xmlAttr" />
      <short value="Unique id for inter-element referencing" />
      <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="DocumentReference.relatesTo.target.identifier.type.coding.extension">
      <path value="DocumentReference.relatesTo.target.identifier.type.coding.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.relatesTo.target.identifier.type.coding.system">
      <path value="DocumentReference.relatesTo.target.identifier.type.coding.system" />
      <short value="해당 전문용어체계(terminology system)의 식별" />
      <definition value="코드에서 기호의 의미를 정의하는 CodeSystem[코드시스템]를 식별" />
      <comment value="The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...).  OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously." />
      <requirements value="Need to be unambiguous about the source of the definition of the symbol." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.system" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="uri" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.3" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./codeSystem" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem" />
      </mapping>
    </element>
    <element id="DocumentReference.relatesTo.target.identifier.type.coding.version">
      <path value="DocumentReference.relatesTo.target.identifier.type.coding.version" />
      <short value="해당 시스템의 버전 정보 - 필요한 경우" />
      <definition value="해당 코드를 선택한 시점에 사용된 코드 시스템의 버전임. 올바로 관리된 코드 시스템은 코드의 의미가 버전과 관계없이 일관적이므로 버전을 보고할 필요가 없음. 그러나 코드 시스템의 관리 상태는 지속적으로 보장할 수 없는 부분이며, 코드의 의미가 일관적임을 보장할 수 없는 경우 버전이 교체되어야 함." />
      <comment value="Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.version" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.7" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./codeSystemVersion" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion" />
      </mapping>
    </element>
    <element id="DocumentReference.relatesTo.target.identifier.type.coding.code">
      <path value="DocumentReference.relatesTo.target.identifier.type.coding.code" />
      <short value="시스템에 정의된 구문(syntax)의 기호(symbol)" />
      <definition value="시스템에 정의된 구문의 기호. 기호는 CodeSystem[코드시스템]에 의해 정의된 구문에서 미리 정의된 코드 또는 표현(expression)일 수 있음. (예: post-coordination)" />
      <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" />
      <requirements value="Need to refer to a particular code in the system." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.code" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="code" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.1" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./code" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code" />
      </mapping>
    </element>
    <element id="DocumentReference.relatesTo.target.identifier.type.coding.display">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="DocumentReference.relatesTo.target.identifier.type.coding.display" />
      <short value="시스템에 정의된 표현" />
      <definition value="시스템 내 코드의 의미를 시스템의 규칙에 따라 표현한 것을 의미함." />
      <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" />
      <requirements value="Need to be able to carry a human-readable meaning of the code for readers that do not know  the system." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.display" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.2 - but note this is not well followed" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CV.displayName" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName" />
      </mapping>
    </element>
    <element id="DocumentReference.relatesTo.target.identifier.type.coding.userSelected">
      <path value="DocumentReference.relatesTo.target.identifier.type.coding.userSelected" />
      <short value="해당 코딩 방법이 사용자에 의해 직접 선택되었는지 여부" />
      <definition value="해당 코딩 방법이 사용자에 의해 직접 선택되었음을 나타냄. 즉, 선택 가능한 항목 (코드 혹은 디스플레이) 목록에 존재하지 않음을 나타냄." />
      <comment value="Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely." />
      <requirements value="This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.userSelected" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="boolean" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="Sometimes implied by being first" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CD.codingRationale" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map;   fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [     fhir:source &quot;true&quot;;     fhir:target dt:CDCoding.codingRationale\#O   ]" />
      </mapping>
    </element>
    <element id="DocumentReference.relatesTo.target.identifier.type.text">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="DocumentReference.relatesTo.target.identifier.type.text" />
      <short value="개념에 대한 일반 텍스트 묘사" />
      <definition value="데이터를 입력한 사용자의 입장에서 보거나/선택하거나/언급한대로의 개념, 혹은 사용자가 의도한 의미를 사람이 사용하는 언어로 표현한 것임." />
      <comment value="Very often the text is the same as a displayName of one of the codings." />
      <requirements value="The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="CodeableConcept.text" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.9. But note many systems use C*E.2 for this" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./originalText[mediaType/code=&quot;text/plain&quot;]/data" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText" />
      </mapping>
    </element>
    <element id="DocumentReference.relatesTo.target.identifier.system">
      <path value="DocumentReference.relatesTo.target.identifier.system" />
      <short value="식별자 값의 네임스페이스(namespace)" />
      <definition value="설정값에 대한 네임 스페이스 (namespace), 즉 고유한 설정값을 설명하는 URL을 설정함." />
      <comment value="Identifier.system is always case sensitive." />
      <requirements value="There are many sets  of identifiers.  To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.system" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="uri" />
      </type>
      <example>
        <label value="General" />
        <valueUri value="http://www.acme.com/identifiers/patient" />
      </example>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.4 / EI-2-4" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="II.root or Role.id.root" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="./IdentifierType" />
      </mapping>
    </element>
    <element id="DocumentReference.relatesTo.target.identifier.value">
      <path value="DocumentReference.relatesTo.target.identifier.value" />
      <short value="고유 설정값" />
      <definition value="일반적으로 식별자의 사용과와 관련이 있으며, 시스템 컨텍스트 (context) 내에서 고유한 식별자의 일부분임." />
      <comment value="If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986.  The value's primary purpose is computational mapping.  As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.)  A value formatted for human display can be conveyed using the [Rendered Value extension](extension-rendered-value.html). Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.value" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <example>
        <label value="General" />
        <valueString value="123456" />
      </example>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.1 / EI.1" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root)" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="./Value" />
      </mapping>
    </element>
    <element id="DocumentReference.relatesTo.target.identifier.period">
      <path value="DocumentReference.relatesTo.target.identifier.period" />
      <short value="식별자의 유효 기간" />
      <definition value="식별자가 사용 가능했거나 가능한 기간을 나타냄." />
      <comment value="A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. &quot;the patient was an inpatient of the hospital for this time range&quot;) or one value from the range applies (e.g. &quot;give to the patient between these two times&quot;).&#xA;&#xA;Period is not used for a duration (a measure of elapsed time). See [Duration](datatypes.html#Duration)." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.period" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="Period" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="per-1" />
        <severity value="error" />
        <human value="If present, start SHALL have a lower value than end" />
        <expression value="start.hasValue().not() or end.hasValue().not() or (start &lt;= end)" />
        <xpath value="not(exists(f:start/@value)) or not(exists(f:end/@value)) or (xs:dateTime(f:start/@value) &lt;= xs:dateTime(f:end/@value))" />
        <source value="http://hl7.org/fhir/StructureDefinition/Period" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="DR" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="IVL&lt;TS&gt;[lowClosed=&quot;true&quot; and highClosed=&quot;true&quot;] or URG&lt;TS&gt;[lowClosed=&quot;true&quot; and highClosed=&quot;true&quot;]" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.7 + CX.8" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="Role.effectiveTime or implied by context" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="./StartDate and ./EndDate" />
      </mapping>
    </element>
    <element id="DocumentReference.relatesTo.target.identifier.period.id">
      <path value="DocumentReference.relatesTo.target.identifier.period.id" />
      <representation value="xmlAttr" />
      <short value="Unique id for inter-element referencing" />
      <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="DocumentReference.relatesTo.target.identifier.period.extension">
      <path value="DocumentReference.relatesTo.target.identifier.period.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.relatesTo.target.identifier.period.start">
      <path value="DocumentReference.relatesTo.target.identifier.period.start" />
      <short value="해당 유효 기간의 시작 시점 (설정된 날짜 포함)" />
      <definition value="해당 유효 기간이 시작되는 시점을 나타냄. 유효 기간은 시작 시점으로 설정된 날짜를 포함함." />
      <comment value="If the low element is missing, the meaning is that the low boundary is not known." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Period.start" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="dateTime" />
      </type>
      <condition value="ele-1" />
      <condition value="per-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="DR.1" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./low" />
      </mapping>
    </element>
    <element id="DocumentReference.relatesTo.target.identifier.period.end">
      <path value="DocumentReference.relatesTo.target.identifier.period.end" />
      <short value="해당 유효 기간의 종료 시점 (설정된 날짜 포함)" />
      <definition value="기간의 종료. 기간의 종료가 누락된 경우, 인스턴스가 생성될 때 끝이 알려지거나 계획되지 않았음을 의미함. 시작일은 과거일 수 있고 종료일은 미래일 수 있음. 이는 해당 기간이 해당 시간에 종료될 예정임을 의미함" />
      <comment value="The high value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has an end value of 2012-02-03." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Period.end" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="dateTime" />
      </type>
      <meaningWhenMissing value="If the end of the period is missing, it means that the period is ongoing" />
      <condition value="ele-1" />
      <condition value="per-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="DR.2" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./high" />
      </mapping>
    </element>
    <element id="DocumentReference.relatesTo.target.identifier.assigner">
      <path value="DocumentReference.relatesTo.target.identifier.assigner" />
      <short value="식별자를 발급한 조직 (단순 텍스트 기입 가능)" />
      <definition value="식별자를 발급하고 관리하는 조직을 나타냄." />
      <comment value="The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.assigner" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="Reference" />
        <targetProfile value="http://hl7.org/fhir/StructureDefinition/Organization" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ref-1" />
        <severity value="error" />
        <human value="SHALL have a contained resource if a local reference is provided" />
        <expression value="reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))" />
        <xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Reference" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.4 / (CX.4,CX.9,CX.10)" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="II.assigningAuthorityName but note that this is an improper use by the definition of the field.  Also Role.scoper" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="./IdentifierIssuingAuthority" />
      </mapping>
    </element>
    <element id="DocumentReference.relatesTo.target.display">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="DocumentReference.relatesTo.target.display" />
      <short value="해당 리소스를 대체하는 텍스트 설명" />
      <definition value="리소스 참조 외에도 리소스를 식별하기 위한 일반 텍스트 설명임." />
      <comment value="This is generally not the same as the Resource.text of the referenced resource.  The purpose is to identify what's being referenced, not to fully describe it." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Reference.display" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.description">
      <path value="DocumentReference.description" />
      <short value="사람이 읽을 수 있는 설명" />
      <definition value="소스 문서에 대한 사람이 읽을 수 있는 설명" />
      <comment value="문서 내용, 문서의 간결한 요약." />
      <requirements value="Helps humans to assess whether the document is of interest." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="DocumentReference.description" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="TXA-25" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value=".outboundRelationship[typeCode=&quot;SUBJ&quot;].target.text" />
      </mapping>
      <mapping>
        <identity value="xds" />
        <map value="DocumentEntry.comments" />
      </mapping>
    </element>
    <element id="DocumentReference.securityLabel">
      <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status">
        <valueCode value="normative" />
      </extension>
      <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version">
        <valueCode value="4.0.0" />
      </extension>
      <path value="DocumentReference.securityLabel" />
      <short value="문서 보안 태그(tag)" />
      <definition value="문서의 개인 정보/보안 수준을 지정하는 보안 태그(Security-Tag ) 코드 세트. DocumentReference.meta.security에는 문서에 대한 &quot;참조&quot;의 보안 라벨이 포함되어 있음. 보안 라벨의 DocumentReference.securityLabel 에는 보안 라벨의 스냅샷이 들어 있음." />
      <comment value="기밀 코드는 여러 개의 어휘 항목을 포함할 수 있음. HL7은 HL7 의료 개인 정보 보호 및 보안 분류 시스템 (HCS)라는 문서 공유 환경에서 바람직한 보안 및 개인 정보 태그에 대한 이해를 발전시킴. 어휘 바인딩은 관리 도메인 책임이므로 다음 사양이 권장되지만 필수는 아님. 해당 방법의 사용은 XDS 선호도 도메인 (Affinity Domain) 또는 발신자와 수신자를 포함한 모든 당사자가 적절하게 태그를 지정하고 시행하도록 신뢰되는 기타 신뢰 도메인(Trust Domain)과 같은 정책 도메인에 달려 있음. HL7은 HL7 의료 개인 정보 보호 및 보안 분류 시스템 (HCS)에는 기밀성, 민감성, 무결성 및 취급 주의사항과 관련된 CodeSystem[]이 있음. 일부 값은 워크플로 (workflow)역할 및 특수 프로젝트와 관련된 로컬 어휘에서 파생 됨." />
      <requirements value="Use of the Health Care Privacy/Security Classification (HCS) system of security-tag use is recommended." />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="DocumentReference.securityLabel" />
      </base>
      <type>
        <code value="CodeableConcept" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="SecurityLabels" />
        </extension>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-isCommonBinding">
          <valueBoolean value="true" />
        </extension>
        <strength value="extensible" />
        <description value="Security Labels from the Healthcare Privacy and Security Classification System." />
        <valueSet value="http://hl7.org/fhir/ValueSet/security-labels" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CE/CNE/CWE" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CD" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept rdfs:subClassOf dt:CD" />
      </mapping>
      <mapping>
        <identity value="fhircomposition" />
        <map value="Composition.confidentiality, Composition.meta.security" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="TXA-18" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value=".confidentialityCode" />
      </mapping>
      <mapping>
        <identity value="xds" />
        <map value="DocumentEntry.confidentialityCode" />
      </mapping>
      <mapping>
        <identity value="cda" />
        <map value="ClinicalDocument/confidentialityCode/@code" />
      </mapping>
    </element>
    <element id="DocumentReference.securityLabel.id">
      <path value="DocumentReference.securityLabel.id" />
      <representation value="xmlAttr" />
      <short value="Unique id for inter-element referencing" />
      <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="DocumentReference.securityLabel.extension">
      <path value="DocumentReference.securityLabel.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.securityLabel.coding">
      <path value="DocumentReference.securityLabel.coding" />
      <short value="전문용어체계(terminology system)에 의해 정의된 코드" />
      <definition value="전문용어체계(terminology system)에 의해 정의된 코드를 참조" />
      <comment value="Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information.  Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true." />
      <requirements value="Allows for alternative encodings within a code system, and translations to other code systems." />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="CodeableConcept.coding" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Coding" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CE/CNE/CWE subset one of the sets of component 1-3 or 4-6" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CV" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding rdfs:subClassOf dt:CDCoding" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.1-8, C*E.10-22" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="union(., ./translation)" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding" />
      </mapping>
    </element>
    <element id="DocumentReference.securityLabel.coding.id">
      <path value="DocumentReference.securityLabel.coding.id" />
      <representation value="xmlAttr" />
      <short value="Unique id for inter-element referencing" />
      <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="DocumentReference.securityLabel.coding.extension">
      <path value="DocumentReference.securityLabel.coding.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.securityLabel.coding.system">
      <path value="DocumentReference.securityLabel.coding.system" />
      <short value="해당 전문용어체계(terminology system)의 식별" />
      <definition value="코드에서 기호의 의미를 정의하는 CodeSystem[코드시스템]를 식별" />
      <comment value="The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...).  OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously." />
      <requirements value="Need to be unambiguous about the source of the definition of the symbol." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.system" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="uri" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.3" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./codeSystem" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem" />
      </mapping>
    </element>
    <element id="DocumentReference.securityLabel.coding.version">
      <path value="DocumentReference.securityLabel.coding.version" />
      <short value="해당 시스템의 버전 정보 - 필요한 경우" />
      <definition value="해당 코드를 선택한 시점에 사용된 코드 시스템의 버전임. 올바로 관리된 코드 시스템은 코드의 의미가 버전과 관계없이 일관적이므로 버전을 보고할 필요가 없음. 그러나 코드 시스템의 관리 상태는 지속적으로 보장할 수 없는 부분이며, 코드의 의미가 일관적임을 보장할 수 없는 경우 버전이 교체되어야 함." />
      <comment value="Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.version" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.7" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./codeSystemVersion" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion" />
      </mapping>
    </element>
    <element id="DocumentReference.securityLabel.coding.code">
      <path value="DocumentReference.securityLabel.coding.code" />
      <short value="시스템에 정의된 구문(syntax)의 기호(symbol)" />
      <definition value="시스템에 정의된 구문의 기호. 기호는 CodeSystem[코드시스템]에 의해 정의된 구문에서 미리 정의된 코드 또는 표현(expression)일 수 있음. (예: post-coordination)" />
      <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" />
      <requirements value="Need to refer to a particular code in the system." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.code" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="code" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.1" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./code" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code" />
      </mapping>
    </element>
    <element id="DocumentReference.securityLabel.coding.display">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="DocumentReference.securityLabel.coding.display" />
      <short value="시스템에 정의된 표현" />
      <definition value="시스템 내 코드의 의미를 시스템의 규칙에 따라 표현한 것을 의미함." />
      <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" />
      <requirements value="Need to be able to carry a human-readable meaning of the code for readers that do not know  the system." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.display" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.2 - but note this is not well followed" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CV.displayName" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName" />
      </mapping>
    </element>
    <element id="DocumentReference.securityLabel.coding.userSelected">
      <path value="DocumentReference.securityLabel.coding.userSelected" />
      <short value="해당 코딩 방법이 사용자에 의해 직접 선택되었는지 여부" />
      <definition value="해당 코딩 방법이 사용자에 의해 직접 선택되었음을 나타냄. 즉, 선택 가능한 항목 (코드 혹은 디스플레이) 목록에 존재하지 않음을 나타냄." />
      <comment value="Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely." />
      <requirements value="This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.userSelected" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="boolean" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="Sometimes implied by being first" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CD.codingRationale" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map;   fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [     fhir:source &quot;true&quot;;     fhir:target dt:CDCoding.codingRationale\#O   ]" />
      </mapping>
    </element>
    <element id="DocumentReference.securityLabel.text">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="DocumentReference.securityLabel.text" />
      <short value="개념에 대한 일반 텍스트 묘사" />
      <definition value="데이터를 입력한 사용자의 입장에서 보거나/선택하거나/언급한대로의 개념, 혹은 사용자가 의도한 의미를 사람이 사용하는 언어로 표현한 것임." />
      <comment value="Very often the text is the same as a displayName of one of the codings." />
      <requirements value="The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="CodeableConcept.text" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.9. But note many systems use C*E.2 for this" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./originalText[mediaType/code=&quot;text/plain&quot;]/data" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText" />
      </mapping>
    </element>
    <element id="DocumentReference.content">
      <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status">
        <valueCode value="normative" />
      </extension>
      <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version">
        <valueCode value="4.0.0" />
      </extension>
      <path value="DocumentReference.content" />
      <short value="참조된 문서" />
      <definition value="참조된 문서 및 형식. 각각 다른 형식의 여러 컨텐츠(content) 요소 반복이 있을 수 있음." />
      <min value="1" />
      <max value="*" />
      <base>
        <path value="DocumentReference.content" />
        <min value="1" />
      </base>
      <type>
        <code value="BackboneElement" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="fhircomposition" />
        <map value="Bundle(Composition+*)" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="document.text" />
      </mapping>
    </element>
    <element id="DocumentReference.content.id">
      <path value="DocumentReference.content.id" />
      <representation value="xmlAttr" />
      <short value="Unique id for inter-element referencing" />
      <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="DocumentReference.content.extension">
      <path value="DocumentReference.content.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.content.modifierExtension">
      <path value="DocumentReference.content.modifierExtension" />
      <short value="Extensions that cannot be ignored even if unrecognized" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.&#xA;&#xA;Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself)." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <requirements value="Modifier extensions allow for extensions that *cannot* be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored.  This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the [definition of modifier extensions](extensibility.html#modifierExtension)." />
      <alias value="extensions" />
      <alias value="user content" />
      <alias value="modifiers" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="BackboneElement.modifierExtension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <isModifier value="true" />
      <isModifierReason value="Modifier extensions are expected to modify the meaning or interpretation of the element that contains them" />
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.content.attachment">
      <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status">
        <valueCode value="normative" />
      </extension>
      <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version">
        <valueCode value="4.0.0" />
      </extension>
      <path value="DocumentReference.content.attachment" />
      <short value="문서에 액세스할 위치" />
      <definition value="컨텐츠(content)의 무결성을 입증하기 위한 중요한 메타데이터(metadata)와 함께 있는 문서의 URL 또는 문서." />
      <comment value="When providing a summary view (for example with Observation.value[x]) Attachment should be represented with a brief display text such as &quot;Signed Procedure Consent&quot;." />
      <min value="1" />
      <max value="1" />
      <base>
        <path value="DocumentReference.content.attachment" />
        <min value="1" />
        <max value="1" />
      </base>
      <type>
        <code value="Attachment" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="att-1" />
        <severity value="error" />
        <human value="If the Attachment has data, it SHALL have a contentType" />
        <expression value="data.empty() or contentType.exists()" />
        <xpath value="not(exists(f:data)) or exists(f:contentType)" />
        <source value="http://hl7.org/fhir/StructureDefinition/Attachment" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="ED/RP" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="ED" />
      </mapping>
      <mapping>
        <identity value="fhircomposition" />
        <map value="Composition.language, &#xA;Composition.title, &#xA;Composition.date" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="TXA-3 for mime type" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="document.text" />
      </mapping>
      <mapping>
        <identity value="xds" />
        <map value="DocumentEntry.mimeType, DocumentEntry.languageCode, DocumentEntry.URI, DocumentEntry.size, DocumentEntry.hash, DocumentEntry.title, DocumentEntry.creationTime" />
      </mapping>
      <mapping>
        <identity value="cda" />
        <map value="ClinicalDocument/languageCode, ClinicalDocument/title, ClinicalDocument/date" />
      </mapping>
    </element>
    <element id="DocumentReference.content.attachment.id">
      <path value="DocumentReference.content.attachment.id" />
      <representation value="xmlAttr" />
      <short value="Unique id for inter-element referencing" />
      <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="DocumentReference.content.attachment.extension">
      <path value="DocumentReference.content.attachment.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.content.attachment.contentType">
      <path value="DocumentReference.content.attachment.contentType" />
      <short value="콘텐츠의 마임(Mime) 유형 (charset 등 포함)" />
      <definition value="첨부파일에서 데이터 유형을 식별하고 데이터를 해석하거나 렌더링(render) 하는 방법을 식별함. charset과 같은 마임(mime) 유형의 매개 변수를 포함함." />
      <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" />
      <requirements value="Processors of the data need to be able to know how to interpret the data." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Attachment.contentType" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="code" />
      </type>
      <example>
        <label value="General" />
        <valueCode value="text/plain; charset=UTF-8, image/png" />
      </example>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="MimeType" />
        </extension>
        <strength value="required" />
        <description value="The mime type of an attachment. Any valid mime type is allowed." />
        <valueSet value="http://hl7.org/fhir/ValueSet/mimetypes|4.0.1" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="ED.2+ED.3/RP.2+RP.3. Note conversion may be needed if old style values are being used" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./mediaType, ./charset" />
      </mapping>
    </element>
    <element id="DocumentReference.content.attachment.language">
      <path value="DocumentReference.content.attachment.language" />
      <short value="내용(content)의 인간 언어 (BCP-47)" />
      <definition value="내용을 표기한 언어의 종류. BCP 47에 의거한 값." />
      <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" />
      <requirements value="Users need to be able to choose between the languages in a set of attachments." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Attachment.language" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="code" />
      </type>
      <example>
        <label value="General" />
        <valueCode value="en-AU" />
      </example>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-maxValueSet">
          <valueCanonical value="http://hl7.org/fhir/ValueSet/all-languages" />
        </extension>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="Language" />
        </extension>
        <strength value="preferred" />
        <description value="A human language." />
        <valueSet value="http://hl7.org/fhir/ValueSet/languages" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./language" />
      </mapping>
    </element>
    <element id="DocumentReference.content.attachment.data">
      <path value="DocumentReference.content.attachment.data" />
      <short value="데이터 인라인(inline) - base64ed" />
      <definition value="첨부 파일의 실제 데이터 - 바이트 시퀀스(sequence of bytes). XML에서는 base64로 표현됨." />
      <comment value="The base64-encoded data SHALL be expressed in the same character set as the base resource XML or JSON." />
      <requirements value="The data needs to able to be transmitted inline." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Attachment.data" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="base64Binary" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="ED.5" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./data" />
      </mapping>
    </element>
    <element id="DocumentReference.content.attachment.url">
      <path value="DocumentReference.content.attachment.url" />
      <short value="데이터를 찾을 수 있는 URI" />
      <definition value="데이터에 액세스할 수 있는 위치" />
      <comment value="If both data and url are provided, the url SHALL point to the same content as the data contains. Urls may be relative references or may reference transient locations such as a wrapping envelope using cid: though this has ramifications for using signatures. Relative URLs are interpreted relative to the service url, like a resource reference, rather than relative to the resource itself. If a URL is provided, it SHALL resolve to actual data." />
      <requirements value="The data needs to be transmitted by reference." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Attachment.url" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="url" />
      </type>
      <example>
        <label value="General" />
        <valueUrl value="http://www.acme.com/logo-small.png" />
      </example>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="RP.1+RP.2 - if they refer to a URL (see v2.6)" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./reference/literal" />
      </mapping>
    </element>
    <element id="DocumentReference.content.attachment.size">
      <path value="DocumentReference.content.attachment.size" />
      <short value="콘텐츠의 바이트 수 (URL이 제공된 경우)" />
      <definition value="해당 첨부파일을 구성하는 데이터 바이트 수임. (base64 인코딩 하기전의 바이트수)" />
      <comment value="The number of bytes is redundant if the data is provided as a base64binary, but is useful if the data is provided as a url reference." />
      <requirements value="Representing the size allows applications to determine whether they should fetch the content automatically in advance, or refuse to fetch it at all." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Attachment.size" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="unsignedInt" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A (needs data type R3 proposal)" />
      </mapping>
    </element>
    <element id="DocumentReference.content.attachment.hash">
      <path value="DocumentReference.content.attachment.hash" />
      <short value="데이터 해시 (sha-1, base64ed)" />
      <definition value="SHA-1을 사용하여 계산된 데이터 해시를 나타냄. base64를 사용하여 표현함." />
      <comment value="The hash is calculated on the data prior to base64 encoding, if the data is based64 encoded. The hash is not intended to support digital signatures. Where protection against malicious threats a digital signature should be considered, see [Provenance.signature](provenance-definitions.html#Provenance.signature) for mechanism to protect a resource with a digital signature." />
      <requirements value="Included so that applications can verify that the contents of a location have not changed due to technical failures (e.g., storage rot, transport glitch, incorrect version)." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Attachment.hash" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="base64Binary" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value=".integrityCheck[parent::ED/integrityCheckAlgorithm=&quot;SHA-1&quot;]" />
      </mapping>
    </element>
    <element id="DocumentReference.content.attachment.title">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="DocumentReference.content.attachment.title" />
      <short value="데이터를 대신하여 표현할 레이블 (label)" />
      <definition value="데이터를 대신하여 표현할 레이블 (label) 혹은 텍스트임." />
      <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" />
      <requirements value="Applications need a label to display to a human user in place of the actual data if the data cannot be rendered or perceived by the viewer." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Attachment.title" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <example>
        <label value="General" />
        <valueString value="Official Corporate Logo" />
      </example>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./title/data" />
      </mapping>
    </element>
    <element id="DocumentReference.content.attachment.creation">
      <path value="DocumentReference.content.attachment.creation" />
      <short value="파일이 처음 생성된 날짜" />
      <definition value="첨부 파일이 처음 생성된 날짜임." />
      <requirements value="This is often tracked as an integrity issue for use of the attachment." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Attachment.creation" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="dateTime" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A (needs data type R3 proposal)" />
      </mapping>
    </element>
    <element id="DocumentReference.content.format">
      <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status">
        <valueCode value="normative" />
      </extension>
      <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version">
        <valueCode value="4.0.0" />
      </extension>
      <path value="DocumentReference.content.format" />
      <short value="문서의 포멧/컨텐츠(Format/content) 규칙" />
      <definition value="문서 인코딩, 구조, 템플릿의 식별자. 문서는mimeType에 표시된 기본 형식을 따름." />
      <comment value="참조-IHE는 대부분 형식 유형에 URN을 발행하지만 모든 문서를 URI로 식별할 수 있는 것은 아님." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="DocumentReference.content.format" />
        <max value="1" />
      </base>
      <type>
        <code value="Coding" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="DocumentFormat" />
        </extension>
        <strength value="preferred" />
        <description value="Document Format Codes." />
        <valueSet value="http://hl7.org/fhir/ValueSet/formatcodes" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CE/CNE/CWE subset one of the sets of component 1-3 or 4-6" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CV" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding rdfs:subClassOf dt:CDCoding" />
      </mapping>
      <mapping>
        <identity value="fhircomposition" />
        <map value="Composition.meta.profile" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="document.text" />
      </mapping>
      <mapping>
        <identity value="xds" />
        <map value="DocumentEntry.formatCode" />
      </mapping>
      <mapping>
        <identity value="cda" />
        <map value="derived from the IHE Profile or Implementation Guide templateID" />
      </mapping>
    </element>
    <element id="DocumentReference.content.format.id">
      <path value="DocumentReference.content.format.id" />
      <representation value="xmlAttr" />
      <short value="Unique id for inter-element referencing" />
      <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="DocumentReference.content.format.extension">
      <path value="DocumentReference.content.format.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.content.format.system">
      <path value="DocumentReference.content.format.system" />
      <short value="해당 전문용어체계(terminology system)의 식별" />
      <definition value="코드에서 기호의 의미를 정의하는 CodeSystem[코드시스템]를 식별" />
      <comment value="The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...).  OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously." />
      <requirements value="Need to be unambiguous about the source of the definition of the symbol." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.system" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="uri" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.3" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./codeSystem" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem" />
      </mapping>
    </element>
    <element id="DocumentReference.content.format.version">
      <path value="DocumentReference.content.format.version" />
      <short value="해당 시스템의 버전 정보 - 필요한 경우" />
      <definition value="해당 코드를 선택한 시점에 사용된 코드 시스템의 버전임. 올바로 관리된 코드 시스템은 코드의 의미가 버전과 관계없이 일관적이므로 버전을 보고할 필요가 없음. 그러나 코드 시스템의 관리 상태는 지속적으로 보장할 수 없는 부분이며, 코드의 의미가 일관적임을 보장할 수 없는 경우 버전이 교체되어야 함." />
      <comment value="Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.version" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.7" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./codeSystemVersion" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion" />
      </mapping>
    </element>
    <element id="DocumentReference.content.format.code">
      <path value="DocumentReference.content.format.code" />
      <short value="시스템에 정의된 구문(syntax)의 기호(symbol)" />
      <definition value="시스템에 정의된 구문의 기호. 기호는 CodeSystem[코드시스템]에 의해 정의된 구문에서 미리 정의된 코드 또는 표현(expression)일 수 있음. (예: post-coordination)" />
      <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" />
      <requirements value="Need to refer to a particular code in the system." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.code" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="code" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.1" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./code" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code" />
      </mapping>
    </element>
    <element id="DocumentReference.content.format.display">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="DocumentReference.content.format.display" />
      <short value="시스템에 정의된 표현" />
      <definition value="시스템 내 코드의 의미를 시스템의 규칙에 따라 표현한 것을 의미함." />
      <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" />
      <requirements value="Need to be able to carry a human-readable meaning of the code for readers that do not know  the system." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.display" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.2 - but note this is not well followed" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CV.displayName" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName" />
      </mapping>
    </element>
    <element id="DocumentReference.content.format.userSelected">
      <path value="DocumentReference.content.format.userSelected" />
      <short value="해당 코딩 방법이 사용자에 의해 직접 선택되었는지 여부" />
      <definition value="해당 코딩 방법이 사용자에 의해 직접 선택되었음을 나타냄. 즉, 선택 가능한 항목 (코드 혹은 디스플레이) 목록에 존재하지 않음을 나타냄." />
      <comment value="Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely." />
      <requirements value="This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.userSelected" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="boolean" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="Sometimes implied by being first" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CD.codingRationale" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map;   fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [     fhir:source &quot;true&quot;;     fhir:target dt:CDCoding.codingRationale\#O   ]" />
      </mapping>
    </element>
    <element id="DocumentReference.context">
      <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status">
        <valueCode value="normative" />
      </extension>
      <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version">
        <valueCode value="4.0.0" />
      </extension>
      <path value="DocumentReference.context" />
      <short value="문서의 임상 컨텐츠(content)" />
      <definition value="문서가 작성된 임상 컨텐츠(content)" />
      <comment value="이러한 값들은 주로 관심있거나 관련된 문서를 검색하는 데 도움이 되도록 기본적으로 추가 됨." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="DocumentReference.context" />
        <max value="1" />
      </base>
      <type>
        <code value="BackboneElement" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="outboundRelationship[typeCode=&quot;SUBJ&quot;].target[classCode&lt;'ACT']" />
      </mapping>
    </element>
    <element id="DocumentReference.context.id">
      <path value="DocumentReference.context.id" />
      <representation value="xmlAttr" />
      <short value="Unique id for inter-element referencing" />
      <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="DocumentReference.context.extension">
      <path value="DocumentReference.context.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.context.modifierExtension">
      <path value="DocumentReference.context.modifierExtension" />
      <short value="Extensions that cannot be ignored even if unrecognized" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.&#xA;&#xA;Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself)." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <requirements value="Modifier extensions allow for extensions that *cannot* be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored.  This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the [definition of modifier extensions](extensibility.html#modifierExtension)." />
      <alias value="extensions" />
      <alias value="user content" />
      <alias value="modifiers" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="BackboneElement.modifierExtension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <isModifier value="true" />
      <isModifierReason value="Modifier extensions are expected to modify the meaning or interpretation of the element that contains them" />
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.context.encounter">
      <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status">
        <valueCode value="normative" />
      </extension>
      <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version">
        <valueCode value="4.0.0" />
      </extension>
      <path value="DocumentReference.context.encounter" />
      <short value="문서 컨텐츠(content)의 컨텍스트(context)" />
      <definition value="문서 컨텐츠(content)와 관련된 임상적 Encounter[] 또는 치료 유형을 설명함." />
      <comment value="References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository." />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="DocumentReference.context.encounter" />
      </base>
      <type>
        <code value="Reference" />
        <targetProfile value="http://hl7.org/fhir/StructureDefinition/Encounter" />
        <targetProfile value="http://hl7.org/fhir/StructureDefinition/EpisodeOfCare" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ref-1" />
        <severity value="error" />
        <human value="SHALL have a contained resource if a local reference is provided" />
        <expression value="reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))" />
        <xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Reference" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" />
      </mapping>
      <mapping>
        <identity value="workflow" />
        <map value="Event.context" />
      </mapping>
      <mapping>
        <identity value="w5" />
        <map value="FiveWs.context" />
      </mapping>
      <mapping>
        <identity value="fhircomposition" />
        <map value="Composition.encounter" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="unique(highest(./outboundRelationship[typeCode=&quot;SUBJ&quot; and isNormalActRelationship()], priorityNumber)/target[moodCode=&quot;EVN&quot; and classCode=(&quot;ENC&quot;, &quot;PCPR&quot;) and isNormalAct])" />
      </mapping>
    </element>
    <element id="DocumentReference.context.encounter.id">
      <path value="DocumentReference.context.encounter.id" />
      <representation value="xmlAttr" />
      <short value="Unique id for inter-element referencing" />
      <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="DocumentReference.context.encounter.extension">
      <path value="DocumentReference.context.encounter.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.context.encounter.reference">
      <path value="DocumentReference.context.encounter.reference" />
      <short value="문안 참조, 상대적, 내부적 혹은 절대적인 URL" />
      <definition value="다른 리소스(resource)을 찾을 수 있는 위치에 대한 참조를 의미함. 해당 참조는 service base URL에 상대적인 경우 상대 참조, 혹은 해당 리소스를 찾을 수 있는 위치인 절대 URL일 수 있음. 해당 참조는 버전에 따라 다를 수 있음. 해당 참조가 FHIR RESTful 서버가 아닌 경우, 버전에 따라 다른 것으로 간주함. 내부 구문 참조('#'으로 시작)는 포함되어 있는 리소스를 참조함." />
      <comment value="Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries.   Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure &quot;/[type]/[id]&quot; then it should be assumed that the reference is to a FHIR RESTful server." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Reference.reference" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <condition value="ref-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.context.encounter.type">
      <path value="DocumentReference.context.encounter.type" />
      <short value="참조(reference)가 참조하는 유형  (예. &quot;Patient&quot;)" />
      <definition value="참조 대상의 예상 형식임. Reference.type과 Reference.reference가 모두 채워지고 Reference.reference가 FHIR URL이면 두가지 모두 일치해야함. 유형은이 참조가 참조하는 유형 인 리소스 정의의 표준 URL임. 참조는 http://hl7.org/fhir/StructureDefinition/과 관련된 URL임. (예) &quot; 환자 &quot; http://hl7.org/fhir/StructureDefinition/Patient에 대한 참조. 절대 URL은 논리 모델에만 허용됨 (리소스가 아닌 논리 모델의 참조에서만 사용할 수 있음)." />
      <comment value="This element is used to indicate the type of  the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Reference.type" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="uri" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="FHIRResourceTypeExt" />
        </extension>
        <strength value="extensible" />
        <description value="Aa resource (or, for logical models, the URI of the logical model)." />
        <valueSet value="http://hl7.org/fhir/ValueSet/resource-types" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.context.encounter.identifier">
      <path value="DocumentReference.context.encounter.identifier" />
      <short value="문안 참조를 알 수 없는 경우의 논리 참조 (logical reference)" />
      <definition value="대상 리소스의 식별자. 이것은 다른 리소스를 직접 참조할 방법이 없을 때 사용- 해당 앤티티(entity)가 FHIR 서버를 통해 사용할 수 없거나  리소스 작성자가 알려진 식별자를 실제 위치로 변활할 방법이 없기 때문에 이 방법이 사용됨. Reference.identifier가 실제로 FHIR 인스턴스로 노출되는 것을 가르킬(point) 필요는 없지만, FHIR 인스턴스로 노출될 것으로 예상되는 비즈니스 개념을 가리켜야하며, 해당 인스턴스는 참조가 허용되는 FHIR 리소스 유형이여야함." />
      <comment value="When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. &#xA;&#xA;When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference&#xA;&#xA;Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.&#xA;&#xA;Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference.  For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport).  One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any)." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Reference.identifier" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="Identifier" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX / EI (occasionally, more often EI maps to a resource id or a URL)" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs.  Also maps to Role[classCode=IDENT]" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="Identifier" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value=".identifier" />
      </mapping>
    </element>
    <element id="DocumentReference.context.encounter.identifier.id">
      <path value="DocumentReference.context.encounter.identifier.id" />
      <representation value="xmlAttr" />
      <short value="Unique id for inter-element referencing" />
      <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="DocumentReference.context.encounter.identifier.extension">
      <path value="DocumentReference.context.encounter.identifier.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.context.encounter.identifier.use">
      <path value="DocumentReference.context.encounter.identifier.use" />
      <short value="usual | official | temp | secondary | old (If known)" />
      <definition value="해당 식별자의 목적" />
      <comment value="Applications can assume that an identifier is permanent unless it explicitly says that it is temporary." />
      <requirements value="Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.use" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="code" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isModifier value="true" />
      <isModifierReason value="This is labeled as &quot;Is Modifier&quot; because applications should not mistake a temporary id for a permanent one." />
      <isSummary value="true" />
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="IdentifierUse" />
        </extension>
        <strength value="required" />
        <description value="Identifies the purpose for this identifier, if known ." />
        <valueSet value="http://hl7.org/fhir/ValueSet/identifier-use|4.0.1" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="N/A" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="Role.code or implied by context" />
      </mapping>
    </element>
    <element id="DocumentReference.context.encounter.identifier.type">
      <path value="DocumentReference.context.encounter.identifier.type" />
      <short value="식별자에 대한 설명" />
      <definition value="특정 목적으로 사용되는 식별자를 결정하기 위해 사용하는 식별자의 코드 유형을 나타냄." />
      <comment value="This element deals only with general categories of identifiers.  It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage.   Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type." />
      <requirements value="Allows users to make use of identifiers when the identifier system is not known." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.type" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="CodeableConcept" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="IdentifierType" />
        </extension>
        <strength value="extensible" />
        <description value="A coded type for an identifier that can be used to determine which identifier to use for a specific purpose." />
        <valueSet value="http://hl7.org/fhir/ValueSet/identifier-type" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CE/CNE/CWE" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CD" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept rdfs:subClassOf dt:CD" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.5" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="Role.code or implied by context" />
      </mapping>
    </element>
    <element id="DocumentReference.context.encounter.identifier.type.id">
      <path value="DocumentReference.context.encounter.identifier.type.id" />
      <representation value="xmlAttr" />
      <short value="Unique id for inter-element referencing" />
      <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="DocumentReference.context.encounter.identifier.type.extension">
      <path value="DocumentReference.context.encounter.identifier.type.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.context.encounter.identifier.type.coding">
      <path value="DocumentReference.context.encounter.identifier.type.coding" />
      <short value="전문용어체계(terminology system)에 의해 정의된 코드" />
      <definition value="전문용어체계(terminology system)에 의해 정의된 코드를 참조" />
      <comment value="Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information.  Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true." />
      <requirements value="Allows for alternative encodings within a code system, and translations to other code systems." />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="CodeableConcept.coding" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Coding" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CE/CNE/CWE subset one of the sets of component 1-3 or 4-6" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CV" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding rdfs:subClassOf dt:CDCoding" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.1-8, C*E.10-22" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="union(., ./translation)" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding" />
      </mapping>
    </element>
    <element id="DocumentReference.context.encounter.identifier.type.coding.id">
      <path value="DocumentReference.context.encounter.identifier.type.coding.id" />
      <representation value="xmlAttr" />
      <short value="Unique id for inter-element referencing" />
      <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="DocumentReference.context.encounter.identifier.type.coding.extension">
      <path value="DocumentReference.context.encounter.identifier.type.coding.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.context.encounter.identifier.type.coding.system">
      <path value="DocumentReference.context.encounter.identifier.type.coding.system" />
      <short value="해당 전문용어체계(terminology system)의 식별" />
      <definition value="코드에서 기호의 의미를 정의하는 CodeSystem[코드시스템]를 식별" />
      <comment value="The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...).  OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously." />
      <requirements value="Need to be unambiguous about the source of the definition of the symbol." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.system" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="uri" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.3" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./codeSystem" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem" />
      </mapping>
    </element>
    <element id="DocumentReference.context.encounter.identifier.type.coding.version">
      <path value="DocumentReference.context.encounter.identifier.type.coding.version" />
      <short value="해당 시스템의 버전 정보 - 필요한 경우" />
      <definition value="해당 코드를 선택한 시점에 사용된 코드 시스템의 버전임. 올바로 관리된 코드 시스템은 코드의 의미가 버전과 관계없이 일관적이므로 버전을 보고할 필요가 없음. 그러나 코드 시스템의 관리 상태는 지속적으로 보장할 수 없는 부분이며, 코드의 의미가 일관적임을 보장할 수 없는 경우 버전이 교체되어야 함." />
      <comment value="Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.version" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.7" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./codeSystemVersion" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion" />
      </mapping>
    </element>
    <element id="DocumentReference.context.encounter.identifier.type.coding.code">
      <path value="DocumentReference.context.encounter.identifier.type.coding.code" />
      <short value="시스템에 정의된 구문(syntax)의 기호(symbol)" />
      <definition value="시스템에 정의된 구문의 기호. 기호는 CodeSystem[코드시스템]에 의해 정의된 구문에서 미리 정의된 코드 또는 표현(expression)일 수 있음. (예: post-coordination)" />
      <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" />
      <requirements value="Need to refer to a particular code in the system." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.code" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="code" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.1" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./code" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code" />
      </mapping>
    </element>
    <element id="DocumentReference.context.encounter.identifier.type.coding.display">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="DocumentReference.context.encounter.identifier.type.coding.display" />
      <short value="시스템에 정의된 표현" />
      <definition value="시스템 내 코드의 의미를 시스템의 규칙에 따라 표현한 것을 의미함." />
      <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" />
      <requirements value="Need to be able to carry a human-readable meaning of the code for readers that do not know  the system." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.display" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.2 - but note this is not well followed" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CV.displayName" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName" />
      </mapping>
    </element>
    <element id="DocumentReference.context.encounter.identifier.type.coding.userSelected">
      <path value="DocumentReference.context.encounter.identifier.type.coding.userSelected" />
      <short value="해당 코딩 방법이 사용자에 의해 직접 선택되었는지 여부" />
      <definition value="해당 코딩 방법이 사용자에 의해 직접 선택되었음을 나타냄. 즉, 선택 가능한 항목 (코드 혹은 디스플레이) 목록에 존재하지 않음을 나타냄." />
      <comment value="Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely." />
      <requirements value="This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.userSelected" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="boolean" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="Sometimes implied by being first" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CD.codingRationale" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map;   fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [     fhir:source &quot;true&quot;;     fhir:target dt:CDCoding.codingRationale\#O   ]" />
      </mapping>
    </element>
    <element id="DocumentReference.context.encounter.identifier.type.text">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="DocumentReference.context.encounter.identifier.type.text" />
      <short value="개념에 대한 일반 텍스트 묘사" />
      <definition value="데이터를 입력한 사용자의 입장에서 보거나/선택하거나/언급한대로의 개념, 혹은 사용자가 의도한 의미를 사람이 사용하는 언어로 표현한 것임." />
      <comment value="Very often the text is the same as a displayName of one of the codings." />
      <requirements value="The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="CodeableConcept.text" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.9. But note many systems use C*E.2 for this" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./originalText[mediaType/code=&quot;text/plain&quot;]/data" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText" />
      </mapping>
    </element>
    <element id="DocumentReference.context.encounter.identifier.system">
      <path value="DocumentReference.context.encounter.identifier.system" />
      <short value="식별자 값의 네임스페이스(namespace)" />
      <definition value="설정값에 대한 네임 스페이스 (namespace), 즉 고유한 설정값을 설명하는 URL을 설정함." />
      <comment value="Identifier.system is always case sensitive." />
      <requirements value="There are many sets  of identifiers.  To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.system" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="uri" />
      </type>
      <example>
        <label value="General" />
        <valueUri value="http://www.acme.com/identifiers/patient" />
      </example>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.4 / EI-2-4" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="II.root or Role.id.root" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="./IdentifierType" />
      </mapping>
    </element>
    <element id="DocumentReference.context.encounter.identifier.value">
      <path value="DocumentReference.context.encounter.identifier.value" />
      <short value="고유 설정값" />
      <definition value="일반적으로 식별자의 사용과와 관련이 있으며, 시스템 컨텍스트 (context) 내에서 고유한 식별자의 일부분임." />
      <comment value="If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986.  The value's primary purpose is computational mapping.  As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.)  A value formatted for human display can be conveyed using the [Rendered Value extension](extension-rendered-value.html). Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.value" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <example>
        <label value="General" />
        <valueString value="123456" />
      </example>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.1 / EI.1" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root)" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="./Value" />
      </mapping>
    </element>
    <element id="DocumentReference.context.encounter.identifier.period">
      <path value="DocumentReference.context.encounter.identifier.period" />
      <short value="식별자의 유효 기간" />
      <definition value="식별자가 사용 가능했거나 가능한 기간을 나타냄." />
      <comment value="A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. &quot;the patient was an inpatient of the hospital for this time range&quot;) or one value from the range applies (e.g. &quot;give to the patient between these two times&quot;).&#xA;&#xA;Period is not used for a duration (a measure of elapsed time). See [Duration](datatypes.html#Duration)." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.period" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="Period" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="per-1" />
        <severity value="error" />
        <human value="If present, start SHALL have a lower value than end" />
        <expression value="start.hasValue().not() or end.hasValue().not() or (start &lt;= end)" />
        <xpath value="not(exists(f:start/@value)) or not(exists(f:end/@value)) or (xs:dateTime(f:start/@value) &lt;= xs:dateTime(f:end/@value))" />
        <source value="http://hl7.org/fhir/StructureDefinition/Period" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="DR" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="IVL&lt;TS&gt;[lowClosed=&quot;true&quot; and highClosed=&quot;true&quot;] or URG&lt;TS&gt;[lowClosed=&quot;true&quot; and highClosed=&quot;true&quot;]" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.7 + CX.8" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="Role.effectiveTime or implied by context" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="./StartDate and ./EndDate" />
      </mapping>
    </element>
    <element id="DocumentReference.context.encounter.identifier.period.id">
      <path value="DocumentReference.context.encounter.identifier.period.id" />
      <representation value="xmlAttr" />
      <short value="Unique id for inter-element referencing" />
      <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="DocumentReference.context.encounter.identifier.period.extension">
      <path value="DocumentReference.context.encounter.identifier.period.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.context.encounter.identifier.period.start">
      <path value="DocumentReference.context.encounter.identifier.period.start" />
      <short value="해당 유효 기간의 시작 시점 (설정된 날짜 포함)" />
      <definition value="해당 유효 기간이 시작되는 시점을 나타냄. 유효 기간은 시작 시점으로 설정된 날짜를 포함함." />
      <comment value="If the low element is missing, the meaning is that the low boundary is not known." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Period.start" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="dateTime" />
      </type>
      <condition value="ele-1" />
      <condition value="per-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="DR.1" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./low" />
      </mapping>
    </element>
    <element id="DocumentReference.context.encounter.identifier.period.end">
      <path value="DocumentReference.context.encounter.identifier.period.end" />
      <short value="해당 유효 기간의 종료 시점 (설정된 날짜 포함)" />
      <definition value="기간의 종료. 기간의 종료가 누락된 경우, 인스턴스가 생성될 때 끝이 알려지거나 계획되지 않았음을 의미함. 시작일은 과거일 수 있고 종료일은 미래일 수 있음. 이는 해당 기간이 해당 시간에 종료될 예정임을 의미함" />
      <comment value="The high value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has an end value of 2012-02-03." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Period.end" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="dateTime" />
      </type>
      <meaningWhenMissing value="If the end of the period is missing, it means that the period is ongoing" />
      <condition value="ele-1" />
      <condition value="per-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="DR.2" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./high" />
      </mapping>
    </element>
    <element id="DocumentReference.context.encounter.identifier.assigner">
      <path value="DocumentReference.context.encounter.identifier.assigner" />
      <short value="식별자를 발급한 조직 (단순 텍스트 기입 가능)" />
      <definition value="식별자를 발급하고 관리하는 조직을 나타냄." />
      <comment value="The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.assigner" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="Reference" />
        <targetProfile value="http://hl7.org/fhir/StructureDefinition/Organization" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ref-1" />
        <severity value="error" />
        <human value="SHALL have a contained resource if a local reference is provided" />
        <expression value="reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))" />
        <xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Reference" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.4 / (CX.4,CX.9,CX.10)" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="II.assigningAuthorityName but note that this is an improper use by the definition of the field.  Also Role.scoper" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="./IdentifierIssuingAuthority" />
      </mapping>
    </element>
    <element id="DocumentReference.context.encounter.display">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="DocumentReference.context.encounter.display" />
      <short value="해당 리소스를 대체하는 텍스트 설명" />
      <definition value="리소스 참조 외에도 리소스를 식별하기 위한 일반 텍스트 설명임." />
      <comment value="This is generally not the same as the Resource.text of the referenced resource.  The purpose is to identify what's being referenced, not to fully describe it." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Reference.display" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.context.event">
      <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status">
        <valueCode value="normative" />
      </extension>
      <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version">
        <valueCode value="4.0.0" />
      </extension>
      <path value="DocumentReference.context.event" />
      <short value="문서화 된 주요 임상 활동" />
      <definition value="해당 코드 목록은 대장 내시경 또는 충수 절제술과 같은 문서화 되는 주요 임상 활동을 나타냄. 경우에 따라 이벤트는 &quot;History and Physical Report&quot;와 같이 코드 유형에 내재되어 있으며, 이 경우 기록되는 절차는 반드시 &quot;History and Physical&quot; act(행위)임." />
      <comment value="이벤트는 단순히 &quot; 절차보고서 &quot; 이고 절차가 &quot; 대장내시경&quot;인 경우와 같이 유형에 내재된 행위를 더욱 전문화할 수 있음. 하나 이상의 이벤트 코드가 포함된 경우, 클래스 또는 유형 요소에 내재된 값과 충돌하지 않아야 하며, 이러한 충돌은 애매한 상황을 발생시킬 수 있음." />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="DocumentReference.context.event" />
      </base>
      <type>
        <code value="CodeableConcept" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="DocumentEventType" />
        </extension>
        <strength value="example" />
        <description value="This list of codes represents the main clinical acts being documented." />
        <valueSet value="http://terminology.hl7.org/ValueSet/v3-ActCode" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CE/CNE/CWE" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CD" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept rdfs:subClassOf dt:CD" />
      </mapping>
      <mapping>
        <identity value="fhircomposition" />
        <map value="Composition.event.code" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value=".code" />
      </mapping>
      <mapping>
        <identity value="xds" />
        <map value="DocumentEntry.eventCodeList" />
      </mapping>
    </element>
    <element id="DocumentReference.context.event.id">
      <path value="DocumentReference.context.event.id" />
      <representation value="xmlAttr" />
      <short value="Unique id for inter-element referencing" />
      <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="DocumentReference.context.event.extension">
      <path value="DocumentReference.context.event.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.context.event.coding">
      <path value="DocumentReference.context.event.coding" />
      <short value="전문용어체계(terminology system)에 의해 정의된 코드" />
      <definition value="전문용어체계(terminology system)에 의해 정의된 코드를 참조" />
      <comment value="Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information.  Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true." />
      <requirements value="Allows for alternative encodings within a code system, and translations to other code systems." />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="CodeableConcept.coding" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Coding" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CE/CNE/CWE subset one of the sets of component 1-3 or 4-6" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CV" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding rdfs:subClassOf dt:CDCoding" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.1-8, C*E.10-22" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="union(., ./translation)" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding" />
      </mapping>
    </element>
    <element id="DocumentReference.context.event.coding.id">
      <path value="DocumentReference.context.event.coding.id" />
      <representation value="xmlAttr" />
      <short value="Unique id for inter-element referencing" />
      <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="DocumentReference.context.event.coding.extension">
      <path value="DocumentReference.context.event.coding.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.context.event.coding.system">
      <path value="DocumentReference.context.event.coding.system" />
      <short value="해당 전문용어체계(terminology system)의 식별" />
      <definition value="코드에서 기호의 의미를 정의하는 CodeSystem[코드시스템]를 식별" />
      <comment value="The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...).  OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously." />
      <requirements value="Need to be unambiguous about the source of the definition of the symbol." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.system" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="uri" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.3" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./codeSystem" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem" />
      </mapping>
    </element>
    <element id="DocumentReference.context.event.coding.version">
      <path value="DocumentReference.context.event.coding.version" />
      <short value="해당 시스템의 버전 정보 - 필요한 경우" />
      <definition value="해당 코드를 선택한 시점에 사용된 코드 시스템의 버전임. 올바로 관리된 코드 시스템은 코드의 의미가 버전과 관계없이 일관적이므로 버전을 보고할 필요가 없음. 그러나 코드 시스템의 관리 상태는 지속적으로 보장할 수 없는 부분이며, 코드의 의미가 일관적임을 보장할 수 없는 경우 버전이 교체되어야 함." />
      <comment value="Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.version" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.7" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./codeSystemVersion" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion" />
      </mapping>
    </element>
    <element id="DocumentReference.context.event.coding.code">
      <path value="DocumentReference.context.event.coding.code" />
      <short value="시스템에 정의된 구문(syntax)의 기호(symbol)" />
      <definition value="시스템에 정의된 구문의 기호. 기호는 CodeSystem[코드시스템]에 의해 정의된 구문에서 미리 정의된 코드 또는 표현(expression)일 수 있음. (예: post-coordination)" />
      <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" />
      <requirements value="Need to refer to a particular code in the system." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.code" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="code" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.1" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./code" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code" />
      </mapping>
    </element>
    <element id="DocumentReference.context.event.coding.display">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="DocumentReference.context.event.coding.display" />
      <short value="시스템에 정의된 표현" />
      <definition value="시스템 내 코드의 의미를 시스템의 규칙에 따라 표현한 것을 의미함." />
      <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" />
      <requirements value="Need to be able to carry a human-readable meaning of the code for readers that do not know  the system." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.display" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.2 - but note this is not well followed" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CV.displayName" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName" />
      </mapping>
    </element>
    <element id="DocumentReference.context.event.coding.userSelected">
      <path value="DocumentReference.context.event.coding.userSelected" />
      <short value="해당 코딩 방법이 사용자에 의해 직접 선택되었는지 여부" />
      <definition value="해당 코딩 방법이 사용자에 의해 직접 선택되었음을 나타냄. 즉, 선택 가능한 항목 (코드 혹은 디스플레이) 목록에 존재하지 않음을 나타냄." />
      <comment value="Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely." />
      <requirements value="This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.userSelected" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="boolean" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="Sometimes implied by being first" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CD.codingRationale" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map;   fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [     fhir:source &quot;true&quot;;     fhir:target dt:CDCoding.codingRationale\#O   ]" />
      </mapping>
    </element>
    <element id="DocumentReference.context.event.text">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="DocumentReference.context.event.text" />
      <short value="개념에 대한 일반 텍스트 묘사" />
      <definition value="데이터를 입력한 사용자의 입장에서 보거나/선택하거나/언급한대로의 개념, 혹은 사용자가 의도한 의미를 사람이 사용하는 언어로 표현한 것임." />
      <comment value="Very often the text is the same as a displayName of one of the codings." />
      <requirements value="The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="CodeableConcept.text" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.9. But note many systems use C*E.2 for this" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./originalText[mediaType/code=&quot;text/plain&quot;]/data" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText" />
      </mapping>
    </element>
    <element id="DocumentReference.context.period">
      <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status">
        <valueCode value="normative" />
      </extension>
      <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version">
        <valueCode value="4.0.0" />
      </extension>
      <path value="DocumentReference.context.period" />
      <short value="문서화 중인 서비스 시간" />
      <definition value="문서에 설명된 서비스가 제공된 기간" />
      <comment value="A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. &quot;the patient was an inpatient of the hospital for this time range&quot;) or one value from the range applies (e.g. &quot;give to the patient between these two times&quot;).&#xA;&#xA;Period is not used for a duration (a measure of elapsed time). See [Duration](datatypes.html#Duration)." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="DocumentReference.context.period" />
        <max value="1" />
      </base>
      <type>
        <code value="Period" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="per-1" />
        <severity value="error" />
        <human value="If present, start SHALL have a lower value than end" />
        <expression value="start.hasValue().not() or end.hasValue().not() or (start &lt;= end)" />
        <xpath value="not(exists(f:start/@value)) or not(exists(f:end/@value)) or (xs:dateTime(f:start/@value) &lt;= xs:dateTime(f:end/@value))" />
        <source value="http://hl7.org/fhir/StructureDefinition/Period" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="DR" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="IVL&lt;TS&gt;[lowClosed=&quot;true&quot; and highClosed=&quot;true&quot;] or URG&lt;TS&gt;[lowClosed=&quot;true&quot; and highClosed=&quot;true&quot;]" />
      </mapping>
      <mapping>
        <identity value="fhircomposition" />
        <map value="Composition.event.period" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value=".effectiveTime" />
      </mapping>
      <mapping>
        <identity value="xds" />
        <map value="DocumentEntry.serviceStartTime, DocumentEntry.serviceStopTime" />
      </mapping>
      <mapping>
        <identity value="cda" />
        <map value="ClinicalDocument/documentationOf/&#xA;serviceEvent/effectiveTime/low/&#xA;@value --&gt; ClinicalDocument/documentationOf/&#xA;serviceEvent/effectiveTime/high/&#xA;@value" />
      </mapping>
    </element>
    <element id="DocumentReference.context.period.id">
      <path value="DocumentReference.context.period.id" />
      <representation value="xmlAttr" />
      <short value="Unique id for inter-element referencing" />
      <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="DocumentReference.context.period.extension">
      <path value="DocumentReference.context.period.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.context.period.start">
      <path value="DocumentReference.context.period.start" />
      <short value="해당 유효 기간의 시작 시점 (설정된 날짜 포함)" />
      <definition value="해당 유효 기간이 시작되는 시점을 나타냄. 유효 기간은 시작 시점으로 설정된 날짜를 포함함." />
      <comment value="If the low element is missing, the meaning is that the low boundary is not known." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Period.start" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="dateTime" />
      </type>
      <condition value="ele-1" />
      <condition value="per-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="DR.1" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./low" />
      </mapping>
    </element>
    <element id="DocumentReference.context.period.end">
      <path value="DocumentReference.context.period.end" />
      <short value="해당 유효 기간의 종료 시점 (설정된 날짜 포함)" />
      <definition value="기간의 종료. 기간의 종료가 누락된 경우, 인스턴스가 생성될 때 끝이 알려지거나 계획되지 않았음을 의미함. 시작일은 과거일 수 있고 종료일은 미래일 수 있음. 이는 해당 기간이 해당 시간에 종료될 예정임을 의미함" />
      <comment value="The high value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has an end value of 2012-02-03." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Period.end" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="dateTime" />
      </type>
      <meaningWhenMissing value="If the end of the period is missing, it means that the period is ongoing" />
      <condition value="ele-1" />
      <condition value="per-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="DR.2" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./high" />
      </mapping>
    </element>
    <element id="DocumentReference.context.facilityType">
      <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status">
        <valueCode value="normative" />
      </extension>
      <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version">
        <valueCode value="4.0.0" />
      </extension>
      <path value="DocumentReference.context.facilityType" />
      <short value="환자가 본 시설의 종류" />
      <definition value="환자가 본 시설의 종류" />
      <comment value="Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="DocumentReference.context.facilityType" />
        <max value="1" />
      </base>
      <type>
        <code value="CodeableConcept" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="DocumentC80FacilityType" />
        </extension>
        <strength value="example" />
        <description value="XDS Facility Type." />
        <valueSet value="http://hl7.org/fhir/ValueSet/c80-facilitycodes" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CE/CNE/CWE" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CD" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept rdfs:subClassOf dt:CD" />
      </mapping>
      <mapping>
        <identity value="fhircomposition" />
        <map value="usually from a mapping to a local ValueSet" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value=".participation[typeCode=&quot;LOC&quot;].role[classCode=&quot;DSDLOC&quot;].code" />
      </mapping>
      <mapping>
        <identity value="xds" />
        <map value="DocumentEntry.healthcareFacilityTypeCode" />
      </mapping>
      <mapping>
        <identity value="cda" />
        <map value="usually a mapping to a local ValueSet. Must be consistent with /clinicalDocument/code" />
      </mapping>
    </element>
    <element id="DocumentReference.context.facilityType.id">
      <path value="DocumentReference.context.facilityType.id" />
      <representation value="xmlAttr" />
      <short value="Unique id for inter-element referencing" />
      <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="DocumentReference.context.facilityType.extension">
      <path value="DocumentReference.context.facilityType.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.context.facilityType.coding">
      <path value="DocumentReference.context.facilityType.coding" />
      <short value="전문용어체계(terminology system)에 의해 정의된 코드" />
      <definition value="전문용어체계(terminology system)에 의해 정의된 코드를 참조" />
      <comment value="Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information.  Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true." />
      <requirements value="Allows for alternative encodings within a code system, and translations to other code systems." />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="CodeableConcept.coding" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Coding" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CE/CNE/CWE subset one of the sets of component 1-3 or 4-6" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CV" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding rdfs:subClassOf dt:CDCoding" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.1-8, C*E.10-22" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="union(., ./translation)" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding" />
      </mapping>
    </element>
    <element id="DocumentReference.context.facilityType.coding.id">
      <path value="DocumentReference.context.facilityType.coding.id" />
      <representation value="xmlAttr" />
      <short value="Unique id for inter-element referencing" />
      <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="DocumentReference.context.facilityType.coding.extension">
      <path value="DocumentReference.context.facilityType.coding.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.context.facilityType.coding.system">
      <path value="DocumentReference.context.facilityType.coding.system" />
      <short value="해당 전문용어체계(terminology system)의 식별" />
      <definition value="코드에서 기호의 의미를 정의하는 CodeSystem[코드시스템]를 식별" />
      <comment value="The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...).  OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously." />
      <requirements value="Need to be unambiguous about the source of the definition of the symbol." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.system" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="uri" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.3" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./codeSystem" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem" />
      </mapping>
    </element>
    <element id="DocumentReference.context.facilityType.coding.version">
      <path value="DocumentReference.context.facilityType.coding.version" />
      <short value="해당 시스템의 버전 정보 - 필요한 경우" />
      <definition value="해당 코드를 선택한 시점에 사용된 코드 시스템의 버전임. 올바로 관리된 코드 시스템은 코드의 의미가 버전과 관계없이 일관적이므로 버전을 보고할 필요가 없음. 그러나 코드 시스템의 관리 상태는 지속적으로 보장할 수 없는 부분이며, 코드의 의미가 일관적임을 보장할 수 없는 경우 버전이 교체되어야 함." />
      <comment value="Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.version" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.7" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./codeSystemVersion" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion" />
      </mapping>
    </element>
    <element id="DocumentReference.context.facilityType.coding.code">
      <path value="DocumentReference.context.facilityType.coding.code" />
      <short value="시스템에 정의된 구문(syntax)의 기호(symbol)" />
      <definition value="시스템에 정의된 구문의 기호. 기호는 CodeSystem[코드시스템]에 의해 정의된 구문에서 미리 정의된 코드 또는 표현(expression)일 수 있음. (예: post-coordination)" />
      <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" />
      <requirements value="Need to refer to a particular code in the system." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.code" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="code" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.1" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./code" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code" />
      </mapping>
    </element>
    <element id="DocumentReference.context.facilityType.coding.display">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="DocumentReference.context.facilityType.coding.display" />
      <short value="시스템에 정의된 표현" />
      <definition value="시스템 내 코드의 의미를 시스템의 규칙에 따라 표현한 것을 의미함." />
      <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" />
      <requirements value="Need to be able to carry a human-readable meaning of the code for readers that do not know  the system." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.display" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.2 - but note this is not well followed" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CV.displayName" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName" />
      </mapping>
    </element>
    <element id="DocumentReference.context.facilityType.coding.userSelected">
      <path value="DocumentReference.context.facilityType.coding.userSelected" />
      <short value="해당 코딩 방법이 사용자에 의해 직접 선택되었는지 여부" />
      <definition value="해당 코딩 방법이 사용자에 의해 직접 선택되었음을 나타냄. 즉, 선택 가능한 항목 (코드 혹은 디스플레이) 목록에 존재하지 않음을 나타냄." />
      <comment value="Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely." />
      <requirements value="This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.userSelected" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="boolean" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="Sometimes implied by being first" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CD.codingRationale" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map;   fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [     fhir:source &quot;true&quot;;     fhir:target dt:CDCoding.codingRationale\#O   ]" />
      </mapping>
    </element>
    <element id="DocumentReference.context.facilityType.text">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="DocumentReference.context.facilityType.text" />
      <short value="개념에 대한 일반 텍스트 묘사" />
      <definition value="데이터를 입력한 사용자의 입장에서 보거나/선택하거나/언급한대로의 개념, 혹은 사용자가 의도한 의미를 사람이 사용하는 언어로 표현한 것임." />
      <comment value="Very often the text is the same as a displayName of one of the codings." />
      <requirements value="The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="CodeableConcept.text" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.9. But note many systems use C*E.2 for this" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./originalText[mediaType/code=&quot;text/plain&quot;]/data" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText" />
      </mapping>
    </element>
    <element id="DocumentReference.context.practiceSetting">
      <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status">
        <valueCode value="normative" />
      </extension>
      <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version">
        <valueCode value="4.0.0" />
      </extension>
      <path value="DocumentReference.context.practiceSetting" />
      <short value="컨텐츠(content)가 생성 된 위치에 대한 추가 세부 정보 (예 : 임상 전문)" />
      <definition value="해당 속성은 종종 임상 전문성을 반영하여 컨텐츠(content)가 생성 된 진료 환경에 대한 세부 사항을 전달할 수 있음." />
      <comment value="해당 요소는 전문 실무 클래스에 대한 대략적인 분류시스템을 기반으로 해야 함. LOINC의 주제 영역 (Subject Matter Domain)에 설명된 것과 같은 실습 설정(Practice Setting)에 분류시스템을 사용할 것을 권장함." />
      <requirements value="This is an important piece of metadata that providers often rely upon to quickly sort and/or filter out to find specific content." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="DocumentReference.context.practiceSetting" />
        <max value="1" />
      </base>
      <type>
        <code value="CodeableConcept" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="DocumentC80PracticeSetting" />
        </extension>
        <strength value="example" />
        <description value="Additional details about where the content was created (e.g. clinical specialty)." />
        <valueSet value="http://hl7.org/fhir/ValueSet/c80-practice-codes" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CE/CNE/CWE" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CD" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept rdfs:subClassOf dt:CD" />
      </mapping>
      <mapping>
        <identity value="fhircomposition" />
        <map value="usually from a mapping to a local ValueSet" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value=".participation[typeCode=&quot;LOC&quot;].role[classCode=&quot;DSDLOC&quot;].code" />
      </mapping>
      <mapping>
        <identity value="xds" />
        <map value="DocumentEntry.practiceSettingCode" />
      </mapping>
      <mapping>
        <identity value="cda" />
        <map value="usually from a mapping to a local ValueSet" />
      </mapping>
    </element>
    <element id="DocumentReference.context.practiceSetting.id">
      <path value="DocumentReference.context.practiceSetting.id" />
      <representation value="xmlAttr" />
      <short value="Unique id for inter-element referencing" />
      <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="DocumentReference.context.practiceSetting.extension">
      <path value="DocumentReference.context.practiceSetting.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.context.practiceSetting.coding">
      <path value="DocumentReference.context.practiceSetting.coding" />
      <short value="전문용어체계(terminology system)에 의해 정의된 코드" />
      <definition value="전문용어체계(terminology system)에 의해 정의된 코드를 참조" />
      <comment value="Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information.  Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true." />
      <requirements value="Allows for alternative encodings within a code system, and translations to other code systems." />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="CodeableConcept.coding" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Coding" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CE/CNE/CWE subset one of the sets of component 1-3 or 4-6" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CV" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding rdfs:subClassOf dt:CDCoding" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.1-8, C*E.10-22" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="union(., ./translation)" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding" />
      </mapping>
    </element>
    <element id="DocumentReference.context.practiceSetting.coding.id">
      <path value="DocumentReference.context.practiceSetting.coding.id" />
      <representation value="xmlAttr" />
      <short value="Unique id for inter-element referencing" />
      <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="DocumentReference.context.practiceSetting.coding.extension">
      <path value="DocumentReference.context.practiceSetting.coding.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.context.practiceSetting.coding.system">
      <path value="DocumentReference.context.practiceSetting.coding.system" />
      <short value="해당 전문용어체계(terminology system)의 식별" />
      <definition value="코드에서 기호의 의미를 정의하는 CodeSystem[코드시스템]를 식별" />
      <comment value="The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...).  OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously." />
      <requirements value="Need to be unambiguous about the source of the definition of the symbol." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.system" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="uri" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.3" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./codeSystem" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem" />
      </mapping>
    </element>
    <element id="DocumentReference.context.practiceSetting.coding.version">
      <path value="DocumentReference.context.practiceSetting.coding.version" />
      <short value="해당 시스템의 버전 정보 - 필요한 경우" />
      <definition value="해당 코드를 선택한 시점에 사용된 코드 시스템의 버전임. 올바로 관리된 코드 시스템은 코드의 의미가 버전과 관계없이 일관적이므로 버전을 보고할 필요가 없음. 그러나 코드 시스템의 관리 상태는 지속적으로 보장할 수 없는 부분이며, 코드의 의미가 일관적임을 보장할 수 없는 경우 버전이 교체되어야 함." />
      <comment value="Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.version" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.7" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./codeSystemVersion" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion" />
      </mapping>
    </element>
    <element id="DocumentReference.context.practiceSetting.coding.code">
      <path value="DocumentReference.context.practiceSetting.coding.code" />
      <short value="시스템에 정의된 구문(syntax)의 기호(symbol)" />
      <definition value="시스템에 정의된 구문의 기호. 기호는 CodeSystem[코드시스템]에 의해 정의된 구문에서 미리 정의된 코드 또는 표현(expression)일 수 있음. (예: post-coordination)" />
      <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" />
      <requirements value="Need to refer to a particular code in the system." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.code" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="code" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.1" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./code" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code" />
      </mapping>
    </element>
    <element id="DocumentReference.context.practiceSetting.coding.display">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="DocumentReference.context.practiceSetting.coding.display" />
      <short value="시스템에 정의된 표현" />
      <definition value="시스템 내 코드의 의미를 시스템의 규칙에 따라 표현한 것을 의미함." />
      <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" />
      <requirements value="Need to be able to carry a human-readable meaning of the code for readers that do not know  the system." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.display" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.2 - but note this is not well followed" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CV.displayName" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName" />
      </mapping>
    </element>
    <element id="DocumentReference.context.practiceSetting.coding.userSelected">
      <path value="DocumentReference.context.practiceSetting.coding.userSelected" />
      <short value="해당 코딩 방법이 사용자에 의해 직접 선택되었는지 여부" />
      <definition value="해당 코딩 방법이 사용자에 의해 직접 선택되었음을 나타냄. 즉, 선택 가능한 항목 (코드 혹은 디스플레이) 목록에 존재하지 않음을 나타냄." />
      <comment value="Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely." />
      <requirements value="This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.userSelected" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="boolean" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="Sometimes implied by being first" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CD.codingRationale" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map;   fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [     fhir:source &quot;true&quot;;     fhir:target dt:CDCoding.codingRationale\#O   ]" />
      </mapping>
    </element>
    <element id="DocumentReference.context.practiceSetting.text">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="DocumentReference.context.practiceSetting.text" />
      <short value="개념에 대한 일반 텍스트 묘사" />
      <definition value="데이터를 입력한 사용자의 입장에서 보거나/선택하거나/언급한대로의 개념, 혹은 사용자가 의도한 의미를 사람이 사용하는 언어로 표현한 것임." />
      <comment value="Very often the text is the same as a displayName of one of the codings." />
      <requirements value="The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="CodeableConcept.text" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.9. But note many systems use C*E.2 for this" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./originalText[mediaType/code=&quot;text/plain&quot;]/data" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText" />
      </mapping>
    </element>
    <element id="DocumentReference.context.sourcePatientInfo">
      <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status">
        <valueCode value="normative" />
      </extension>
      <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version">
        <valueCode value="4.0.0" />
      </extension>
      <path value="DocumentReference.context.sourcePatientInfo" />
      <short value="소스에서의 환자 인구 통계" />
      <definition value="문서가 게시될 때 알려진 환자 정보. 특정 버전 또는 포함된 버전에 대한 참조일 수 있음." />
      <comment value="References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="DocumentReference.context.sourcePatientInfo" />
        <max value="1" />
      </base>
      <type>
        <code value="Reference" />
        <targetProfile value="http://hl7.org/fhir/StructureDefinition/Patient" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ref-1" />
        <severity value="error" />
        <human value="SHALL have a contained resource if a local reference is provided" />
        <expression value="reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))" />
        <xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Reference" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" />
      </mapping>
      <mapping>
        <identity value="fhircomposition" />
        <map value="Composition.subject" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value=".participation[typeCode=&quot;SBJ&quot;].role[typeCode=&quot;PAT&quot;]" />
      </mapping>
      <mapping>
        <identity value="xds" />
        <map value="DocumentEntry.sourcePatientInfo, DocumentEntry.sourcePatientId" />
      </mapping>
      <mapping>
        <identity value="cda" />
        <map value="ClinicalDocument/recordTarget/" />
      </mapping>
    </element>
    <element id="DocumentReference.context.sourcePatientInfo.id">
      <path value="DocumentReference.context.sourcePatientInfo.id" />
      <representation value="xmlAttr" />
      <short value="Unique id for inter-element referencing" />
      <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="DocumentReference.context.sourcePatientInfo.extension">
      <path value="DocumentReference.context.sourcePatientInfo.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.context.sourcePatientInfo.reference">
      <path value="DocumentReference.context.sourcePatientInfo.reference" />
      <short value="문안 참조, 상대적, 내부적 혹은 절대적인 URL" />
      <definition value="다른 리소스(resource)을 찾을 수 있는 위치에 대한 참조를 의미함. 해당 참조는 service base URL에 상대적인 경우 상대 참조, 혹은 해당 리소스를 찾을 수 있는 위치인 절대 URL일 수 있음. 해당 참조는 버전에 따라 다를 수 있음. 해당 참조가 FHIR RESTful 서버가 아닌 경우, 버전에 따라 다른 것으로 간주함. 내부 구문 참조('#'으로 시작)는 포함되어 있는 리소스를 참조함." />
      <comment value="Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries.   Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure &quot;/[type]/[id]&quot; then it should be assumed that the reference is to a FHIR RESTful server." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Reference.reference" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <condition value="ref-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.context.sourcePatientInfo.type">
      <path value="DocumentReference.context.sourcePatientInfo.type" />
      <short value="참조(reference)가 참조하는 유형  (예. &quot;Patient&quot;)" />
      <definition value="참조 대상의 예상 형식임. Reference.type과 Reference.reference가 모두 채워지고 Reference.reference가 FHIR URL이면 두가지 모두 일치해야함. 유형은이 참조가 참조하는 유형 인 리소스 정의의 표준 URL임. 참조는 http://hl7.org/fhir/StructureDefinition/과 관련된 URL임. (예) &quot; 환자 &quot; http://hl7.org/fhir/StructureDefinition/Patient에 대한 참조. 절대 URL은 논리 모델에만 허용됨 (리소스가 아닌 논리 모델의 참조에서만 사용할 수 있음)." />
      <comment value="This element is used to indicate the type of  the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Reference.type" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="uri" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="FHIRResourceTypeExt" />
        </extension>
        <strength value="extensible" />
        <description value="Aa resource (or, for logical models, the URI of the logical model)." />
        <valueSet value="http://hl7.org/fhir/ValueSet/resource-types" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.context.sourcePatientInfo.identifier">
      <path value="DocumentReference.context.sourcePatientInfo.identifier" />
      <short value="문안 참조를 알 수 없는 경우의 논리 참조 (logical reference)" />
      <definition value="대상 리소스의 식별자. 이것은 다른 리소스를 직접 참조할 방법이 없을 때 사용- 해당 앤티티(entity)가 FHIR 서버를 통해 사용할 수 없거나  리소스 작성자가 알려진 식별자를 실제 위치로 변활할 방법이 없기 때문에 이 방법이 사용됨. Reference.identifier가 실제로 FHIR 인스턴스로 노출되는 것을 가르킬(point) 필요는 없지만, FHIR 인스턴스로 노출될 것으로 예상되는 비즈니스 개념을 가리켜야하며, 해당 인스턴스는 참조가 허용되는 FHIR 리소스 유형이여야함." />
      <comment value="When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. &#xA;&#xA;When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference&#xA;&#xA;Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.&#xA;&#xA;Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference.  For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport).  One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any)." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Reference.identifier" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="Identifier" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX / EI (occasionally, more often EI maps to a resource id or a URL)" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs.  Also maps to Role[classCode=IDENT]" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="Identifier" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value=".identifier" />
      </mapping>
    </element>
    <element id="DocumentReference.context.sourcePatientInfo.identifier.id">
      <path value="DocumentReference.context.sourcePatientInfo.identifier.id" />
      <representation value="xmlAttr" />
      <short value="Unique id for inter-element referencing" />
      <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="DocumentReference.context.sourcePatientInfo.identifier.extension">
      <path value="DocumentReference.context.sourcePatientInfo.identifier.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.context.sourcePatientInfo.identifier.use">
      <path value="DocumentReference.context.sourcePatientInfo.identifier.use" />
      <short value="usual | official | temp | secondary | old (If known)" />
      <definition value="해당 식별자의 목적" />
      <comment value="Applications can assume that an identifier is permanent unless it explicitly says that it is temporary." />
      <requirements value="Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.use" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="code" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isModifier value="true" />
      <isModifierReason value="This is labeled as &quot;Is Modifier&quot; because applications should not mistake a temporary id for a permanent one." />
      <isSummary value="true" />
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="IdentifierUse" />
        </extension>
        <strength value="required" />
        <description value="Identifies the purpose for this identifier, if known ." />
        <valueSet value="http://hl7.org/fhir/ValueSet/identifier-use|4.0.1" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="N/A" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="Role.code or implied by context" />
      </mapping>
    </element>
    <element id="DocumentReference.context.sourcePatientInfo.identifier.type">
      <path value="DocumentReference.context.sourcePatientInfo.identifier.type" />
      <short value="식별자에 대한 설명" />
      <definition value="특정 목적으로 사용되는 식별자를 결정하기 위해 사용하는 식별자의 코드 유형을 나타냄." />
      <comment value="This element deals only with general categories of identifiers.  It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage.   Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type." />
      <requirements value="Allows users to make use of identifiers when the identifier system is not known." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.type" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="CodeableConcept" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="IdentifierType" />
        </extension>
        <strength value="extensible" />
        <description value="A coded type for an identifier that can be used to determine which identifier to use for a specific purpose." />
        <valueSet value="http://hl7.org/fhir/ValueSet/identifier-type" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CE/CNE/CWE" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CD" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept rdfs:subClassOf dt:CD" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.5" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="Role.code or implied by context" />
      </mapping>
    </element>
    <element id="DocumentReference.context.sourcePatientInfo.identifier.type.id">
      <path value="DocumentReference.context.sourcePatientInfo.identifier.type.id" />
      <representation value="xmlAttr" />
      <short value="Unique id for inter-element referencing" />
      <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="DocumentReference.context.sourcePatientInfo.identifier.type.extension">
      <path value="DocumentReference.context.sourcePatientInfo.identifier.type.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.context.sourcePatientInfo.identifier.type.coding">
      <path value="DocumentReference.context.sourcePatientInfo.identifier.type.coding" />
      <short value="전문용어체계(terminology system)에 의해 정의된 코드" />
      <definition value="전문용어체계(terminology system)에 의해 정의된 코드를 참조" />
      <comment value="Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information.  Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true." />
      <requirements value="Allows for alternative encodings within a code system, and translations to other code systems." />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="CodeableConcept.coding" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Coding" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CE/CNE/CWE subset one of the sets of component 1-3 or 4-6" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CV" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding rdfs:subClassOf dt:CDCoding" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.1-8, C*E.10-22" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="union(., ./translation)" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding" />
      </mapping>
    </element>
    <element id="DocumentReference.context.sourcePatientInfo.identifier.type.coding.id">
      <path value="DocumentReference.context.sourcePatientInfo.identifier.type.coding.id" />
      <representation value="xmlAttr" />
      <short value="Unique id for inter-element referencing" />
      <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="DocumentReference.context.sourcePatientInfo.identifier.type.coding.extension">
      <path value="DocumentReference.context.sourcePatientInfo.identifier.type.coding.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.context.sourcePatientInfo.identifier.type.coding.system">
      <path value="DocumentReference.context.sourcePatientInfo.identifier.type.coding.system" />
      <short value="해당 전문용어체계(terminology system)의 식별" />
      <definition value="코드에서 기호의 의미를 정의하는 CodeSystem[코드시스템]를 식별" />
      <comment value="The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...).  OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously." />
      <requirements value="Need to be unambiguous about the source of the definition of the symbol." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.system" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="uri" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.3" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./codeSystem" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem" />
      </mapping>
    </element>
    <element id="DocumentReference.context.sourcePatientInfo.identifier.type.coding.version">
      <path value="DocumentReference.context.sourcePatientInfo.identifier.type.coding.version" />
      <short value="해당 시스템의 버전 정보 - 필요한 경우" />
      <definition value="해당 코드를 선택한 시점에 사용된 코드 시스템의 버전임. 올바로 관리된 코드 시스템은 코드의 의미가 버전과 관계없이 일관적이므로 버전을 보고할 필요가 없음. 그러나 코드 시스템의 관리 상태는 지속적으로 보장할 수 없는 부분이며, 코드의 의미가 일관적임을 보장할 수 없는 경우 버전이 교체되어야 함." />
      <comment value="Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.version" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.7" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./codeSystemVersion" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion" />
      </mapping>
    </element>
    <element id="DocumentReference.context.sourcePatientInfo.identifier.type.coding.code">
      <path value="DocumentReference.context.sourcePatientInfo.identifier.type.coding.code" />
      <short value="시스템에 정의된 구문(syntax)의 기호(symbol)" />
      <definition value="시스템에 정의된 구문의 기호. 기호는 CodeSystem[코드시스템]에 의해 정의된 구문에서 미리 정의된 코드 또는 표현(expression)일 수 있음. (예: post-coordination)" />
      <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" />
      <requirements value="Need to refer to a particular code in the system." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.code" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="code" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.1" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./code" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code" />
      </mapping>
    </element>
    <element id="DocumentReference.context.sourcePatientInfo.identifier.type.coding.display">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="DocumentReference.context.sourcePatientInfo.identifier.type.coding.display" />
      <short value="시스템에 정의된 표현" />
      <definition value="시스템 내 코드의 의미를 시스템의 규칙에 따라 표현한 것을 의미함." />
      <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" />
      <requirements value="Need to be able to carry a human-readable meaning of the code for readers that do not know  the system." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.display" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.2 - but note this is not well followed" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CV.displayName" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName" />
      </mapping>
    </element>
    <element id="DocumentReference.context.sourcePatientInfo.identifier.type.coding.userSelected">
      <path value="DocumentReference.context.sourcePatientInfo.identifier.type.coding.userSelected" />
      <short value="해당 코딩 방법이 사용자에 의해 직접 선택되었는지 여부" />
      <definition value="해당 코딩 방법이 사용자에 의해 직접 선택되었음을 나타냄. 즉, 선택 가능한 항목 (코드 혹은 디스플레이) 목록에 존재하지 않음을 나타냄." />
      <comment value="Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely." />
      <requirements value="This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.userSelected" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="boolean" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="Sometimes implied by being first" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CD.codingRationale" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map;   fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [     fhir:source &quot;true&quot;;     fhir:target dt:CDCoding.codingRationale\#O   ]" />
      </mapping>
    </element>
    <element id="DocumentReference.context.sourcePatientInfo.identifier.type.text">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="DocumentReference.context.sourcePatientInfo.identifier.type.text" />
      <short value="개념에 대한 일반 텍스트 묘사" />
      <definition value="데이터를 입력한 사용자의 입장에서 보거나/선택하거나/언급한대로의 개념, 혹은 사용자가 의도한 의미를 사람이 사용하는 언어로 표현한 것임." />
      <comment value="Very often the text is the same as a displayName of one of the codings." />
      <requirements value="The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="CodeableConcept.text" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.9. But note many systems use C*E.2 for this" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./originalText[mediaType/code=&quot;text/plain&quot;]/data" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText" />
      </mapping>
    </element>
    <element id="DocumentReference.context.sourcePatientInfo.identifier.system">
      <path value="DocumentReference.context.sourcePatientInfo.identifier.system" />
      <short value="식별자 값의 네임스페이스(namespace)" />
      <definition value="설정값에 대한 네임 스페이스 (namespace), 즉 고유한 설정값을 설명하는 URL을 설정함." />
      <comment value="Identifier.system is always case sensitive." />
      <requirements value="There are many sets  of identifiers.  To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.system" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="uri" />
      </type>
      <example>
        <label value="General" />
        <valueUri value="http://www.acme.com/identifiers/patient" />
      </example>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.4 / EI-2-4" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="II.root or Role.id.root" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="./IdentifierType" />
      </mapping>
    </element>
    <element id="DocumentReference.context.sourcePatientInfo.identifier.value">
      <path value="DocumentReference.context.sourcePatientInfo.identifier.value" />
      <short value="고유 설정값" />
      <definition value="일반적으로 식별자의 사용과와 관련이 있으며, 시스템 컨텍스트 (context) 내에서 고유한 식별자의 일부분임." />
      <comment value="If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986.  The value's primary purpose is computational mapping.  As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.)  A value formatted for human display can be conveyed using the [Rendered Value extension](extension-rendered-value.html). Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.value" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <example>
        <label value="General" />
        <valueString value="123456" />
      </example>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.1 / EI.1" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root)" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="./Value" />
      </mapping>
    </element>
    <element id="DocumentReference.context.sourcePatientInfo.identifier.period">
      <path value="DocumentReference.context.sourcePatientInfo.identifier.period" />
      <short value="식별자의 유효 기간" />
      <definition value="식별자가 사용 가능했거나 가능한 기간을 나타냄." />
      <comment value="A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. &quot;the patient was an inpatient of the hospital for this time range&quot;) or one value from the range applies (e.g. &quot;give to the patient between these two times&quot;).&#xA;&#xA;Period is not used for a duration (a measure of elapsed time). See [Duration](datatypes.html#Duration)." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.period" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="Period" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="per-1" />
        <severity value="error" />
        <human value="If present, start SHALL have a lower value than end" />
        <expression value="start.hasValue().not() or end.hasValue().not() or (start &lt;= end)" />
        <xpath value="not(exists(f:start/@value)) or not(exists(f:end/@value)) or (xs:dateTime(f:start/@value) &lt;= xs:dateTime(f:end/@value))" />
        <source value="http://hl7.org/fhir/StructureDefinition/Period" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="DR" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="IVL&lt;TS&gt;[lowClosed=&quot;true&quot; and highClosed=&quot;true&quot;] or URG&lt;TS&gt;[lowClosed=&quot;true&quot; and highClosed=&quot;true&quot;]" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.7 + CX.8" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="Role.effectiveTime or implied by context" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="./StartDate and ./EndDate" />
      </mapping>
    </element>
    <element id="DocumentReference.context.sourcePatientInfo.identifier.period.id">
      <path value="DocumentReference.context.sourcePatientInfo.identifier.period.id" />
      <representation value="xmlAttr" />
      <short value="Unique id for inter-element referencing" />
      <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="DocumentReference.context.sourcePatientInfo.identifier.period.extension">
      <path value="DocumentReference.context.sourcePatientInfo.identifier.period.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.context.sourcePatientInfo.identifier.period.start">
      <path value="DocumentReference.context.sourcePatientInfo.identifier.period.start" />
      <short value="해당 유효 기간의 시작 시점 (설정된 날짜 포함)" />
      <definition value="해당 유효 기간이 시작되는 시점을 나타냄. 유효 기간은 시작 시점으로 설정된 날짜를 포함함." />
      <comment value="If the low element is missing, the meaning is that the low boundary is not known." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Period.start" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="dateTime" />
      </type>
      <condition value="ele-1" />
      <condition value="per-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="DR.1" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./low" />
      </mapping>
    </element>
    <element id="DocumentReference.context.sourcePatientInfo.identifier.period.end">
      <path value="DocumentReference.context.sourcePatientInfo.identifier.period.end" />
      <short value="해당 유효 기간의 종료 시점 (설정된 날짜 포함)" />
      <definition value="기간의 종료. 기간의 종료가 누락된 경우, 인스턴스가 생성될 때 끝이 알려지거나 계획되지 않았음을 의미함. 시작일은 과거일 수 있고 종료일은 미래일 수 있음. 이는 해당 기간이 해당 시간에 종료될 예정임을 의미함" />
      <comment value="The high value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has an end value of 2012-02-03." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Period.end" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="dateTime" />
      </type>
      <meaningWhenMissing value="If the end of the period is missing, it means that the period is ongoing" />
      <condition value="ele-1" />
      <condition value="per-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="DR.2" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./high" />
      </mapping>
    </element>
    <element id="DocumentReference.context.sourcePatientInfo.identifier.assigner">
      <path value="DocumentReference.context.sourcePatientInfo.identifier.assigner" />
      <short value="식별자를 발급한 조직 (단순 텍스트 기입 가능)" />
      <definition value="식별자를 발급하고 관리하는 조직을 나타냄." />
      <comment value="The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.assigner" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="Reference" />
        <targetProfile value="http://hl7.org/fhir/StructureDefinition/Organization" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ref-1" />
        <severity value="error" />
        <human value="SHALL have a contained resource if a local reference is provided" />
        <expression value="reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))" />
        <xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Reference" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.4 / (CX.4,CX.9,CX.10)" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="II.assigningAuthorityName but note that this is an improper use by the definition of the field.  Also Role.scoper" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="./IdentifierIssuingAuthority" />
      </mapping>
    </element>
    <element id="DocumentReference.context.sourcePatientInfo.display">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="DocumentReference.context.sourcePatientInfo.display" />
      <short value="해당 리소스를 대체하는 텍스트 설명" />
      <definition value="리소스 참조 외에도 리소스를 식별하기 위한 일반 텍스트 설명임." />
      <comment value="This is generally not the same as the Resource.text of the referenced resource.  The purpose is to identify what's being referenced, not to fully describe it." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Reference.display" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.context.related">
      <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status">
        <valueCode value="normative" />
      </extension>
      <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-normative-version">
        <valueCode value="4.0.0" />
      </extension>
      <path value="DocumentReference.context.related" />
      <short value="관련된 식별자 또는 리소스" />
      <definition value="DocumentReference[]와 관련된 식별자 또는 리소스." />
      <comment value="DocumentReference[] 또는 참조된 Document[문서]를 생성한 식별자 또는 리소스 일 수 있음." />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="DocumentReference.context.related" />
      </base>
      <type>
        <code value="Reference" />
        <targetProfile value="http://hl7.org/fhir/StructureDefinition/Resource" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ref-1" />
        <severity value="error" />
        <human value="SHALL have a contained resource if a local reference is provided" />
        <expression value="reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))" />
        <xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Reference" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" />
      </mapping>
      <mapping>
        <identity value="fhircomposition" />
        <map value="Composition.event.detail" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./outboundRelationship[typeCode=&quot;PERT&quot; and isNormalActRelationship()] / target[isNormalAct]" />
      </mapping>
      <mapping>
        <identity value="xds" />
        <map value="DocumentEntry.referenceIdList" />
      </mapping>
      <mapping>
        <identity value="cda" />
        <map value="ClinicalDocument/relatedDocument" />
      </mapping>
    </element>
    <element id="DocumentReference.context.related.id">
      <path value="DocumentReference.context.related.id" />
      <representation value="xmlAttr" />
      <short value="Unique id for inter-element referencing" />
      <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="DocumentReference.context.related.extension">
      <path value="DocumentReference.context.related.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.context.related.reference">
      <path value="DocumentReference.context.related.reference" />
      <short value="문안 참조, 상대적, 내부적 혹은 절대적인 URL" />
      <definition value="다른 리소스(resource)을 찾을 수 있는 위치에 대한 참조를 의미함. 해당 참조는 service base URL에 상대적인 경우 상대 참조, 혹은 해당 리소스를 찾을 수 있는 위치인 절대 URL일 수 있음. 해당 참조는 버전에 따라 다를 수 있음. 해당 참조가 FHIR RESTful 서버가 아닌 경우, 버전에 따라 다른 것으로 간주함. 내부 구문 참조('#'으로 시작)는 포함되어 있는 리소스를 참조함." />
      <comment value="Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries.   Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure &quot;/[type]/[id]&quot; then it should be assumed that the reference is to a FHIR RESTful server." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Reference.reference" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <condition value="ref-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.context.related.type">
      <path value="DocumentReference.context.related.type" />
      <short value="참조(reference)가 참조하는 유형  (예. &quot;Patient&quot;)" />
      <definition value="참조 대상의 예상 형식임. Reference.type과 Reference.reference가 모두 채워지고 Reference.reference가 FHIR URL이면 두가지 모두 일치해야함. 유형은이 참조가 참조하는 유형 인 리소스 정의의 표준 URL임. 참조는 http://hl7.org/fhir/StructureDefinition/과 관련된 URL임. (예) &quot; 환자 &quot; http://hl7.org/fhir/StructureDefinition/Patient에 대한 참조. 절대 URL은 논리 모델에만 허용됨 (리소스가 아닌 논리 모델의 참조에서만 사용할 수 있음)." />
      <comment value="This element is used to indicate the type of  the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Reference.type" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="uri" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="FHIRResourceTypeExt" />
        </extension>
        <strength value="extensible" />
        <description value="Aa resource (or, for logical models, the URI of the logical model)." />
        <valueSet value="http://hl7.org/fhir/ValueSet/resource-types" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.context.related.identifier">
      <path value="DocumentReference.context.related.identifier" />
      <short value="문안 참조를 알 수 없는 경우의 논리 참조 (logical reference)" />
      <definition value="대상 리소스의 식별자. 이것은 다른 리소스를 직접 참조할 방법이 없을 때 사용- 해당 앤티티(entity)가 FHIR 서버를 통해 사용할 수 없거나  리소스 작성자가 알려진 식별자를 실제 위치로 변활할 방법이 없기 때문에 이 방법이 사용됨. Reference.identifier가 실제로 FHIR 인스턴스로 노출되는 것을 가르킬(point) 필요는 없지만, FHIR 인스턴스로 노출될 것으로 예상되는 비즈니스 개념을 가리켜야하며, 해당 인스턴스는 참조가 허용되는 FHIR 리소스 유형이여야함." />
      <comment value="When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. &#xA;&#xA;When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference&#xA;&#xA;Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.&#xA;&#xA;Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference.  For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport).  One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any)." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Reference.identifier" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="Identifier" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX / EI (occasionally, more often EI maps to a resource id or a URL)" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs.  Also maps to Role[classCode=IDENT]" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="Identifier" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value=".identifier" />
      </mapping>
    </element>
    <element id="DocumentReference.context.related.identifier.id">
      <path value="DocumentReference.context.related.identifier.id" />
      <representation value="xmlAttr" />
      <short value="Unique id for inter-element referencing" />
      <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="DocumentReference.context.related.identifier.extension">
      <path value="DocumentReference.context.related.identifier.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.context.related.identifier.use">
      <path value="DocumentReference.context.related.identifier.use" />
      <short value="usual | official | temp | secondary | old (If known)" />
      <definition value="해당 식별자의 목적" />
      <comment value="Applications can assume that an identifier is permanent unless it explicitly says that it is temporary." />
      <requirements value="Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.use" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="code" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isModifier value="true" />
      <isModifierReason value="This is labeled as &quot;Is Modifier&quot; because applications should not mistake a temporary id for a permanent one." />
      <isSummary value="true" />
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="IdentifierUse" />
        </extension>
        <strength value="required" />
        <description value="Identifies the purpose for this identifier, if known ." />
        <valueSet value="http://hl7.org/fhir/ValueSet/identifier-use|4.0.1" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="N/A" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="Role.code or implied by context" />
      </mapping>
    </element>
    <element id="DocumentReference.context.related.identifier.type">
      <path value="DocumentReference.context.related.identifier.type" />
      <short value="식별자에 대한 설명" />
      <definition value="특정 목적으로 사용되는 식별자를 결정하기 위해 사용하는 식별자의 코드 유형을 나타냄." />
      <comment value="This element deals only with general categories of identifiers.  It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage.   Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type." />
      <requirements value="Allows users to make use of identifiers when the identifier system is not known." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.type" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="CodeableConcept" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="IdentifierType" />
        </extension>
        <strength value="extensible" />
        <description value="A coded type for an identifier that can be used to determine which identifier to use for a specific purpose." />
        <valueSet value="http://hl7.org/fhir/ValueSet/identifier-type" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CE/CNE/CWE" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CD" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept rdfs:subClassOf dt:CD" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.5" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="Role.code or implied by context" />
      </mapping>
    </element>
    <element id="DocumentReference.context.related.identifier.type.id">
      <path value="DocumentReference.context.related.identifier.type.id" />
      <representation value="xmlAttr" />
      <short value="Unique id for inter-element referencing" />
      <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="DocumentReference.context.related.identifier.type.extension">
      <path value="DocumentReference.context.related.identifier.type.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.context.related.identifier.type.coding">
      <path value="DocumentReference.context.related.identifier.type.coding" />
      <short value="전문용어체계(terminology system)에 의해 정의된 코드" />
      <definition value="전문용어체계(terminology system)에 의해 정의된 코드를 참조" />
      <comment value="Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information.  Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true." />
      <requirements value="Allows for alternative encodings within a code system, and translations to other code systems." />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="CodeableConcept.coding" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Coding" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CE/CNE/CWE subset one of the sets of component 1-3 or 4-6" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CV" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding rdfs:subClassOf dt:CDCoding" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.1-8, C*E.10-22" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="union(., ./translation)" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding" />
      </mapping>
    </element>
    <element id="DocumentReference.context.related.identifier.type.coding.id">
      <path value="DocumentReference.context.related.identifier.type.coding.id" />
      <representation value="xmlAttr" />
      <short value="Unique id for inter-element referencing" />
      <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="DocumentReference.context.related.identifier.type.coding.extension">
      <path value="DocumentReference.context.related.identifier.type.coding.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.context.related.identifier.type.coding.system">
      <path value="DocumentReference.context.related.identifier.type.coding.system" />
      <short value="해당 전문용어체계(terminology system)의 식별" />
      <definition value="코드에서 기호의 의미를 정의하는 CodeSystem[코드시스템]를 식별" />
      <comment value="The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...).  OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously." />
      <requirements value="Need to be unambiguous about the source of the definition of the symbol." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.system" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="uri" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.3" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./codeSystem" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem" />
      </mapping>
    </element>
    <element id="DocumentReference.context.related.identifier.type.coding.version">
      <path value="DocumentReference.context.related.identifier.type.coding.version" />
      <short value="해당 시스템의 버전 정보 - 필요한 경우" />
      <definition value="해당 코드를 선택한 시점에 사용된 코드 시스템의 버전임. 올바로 관리된 코드 시스템은 코드의 의미가 버전과 관계없이 일관적이므로 버전을 보고할 필요가 없음. 그러나 코드 시스템의 관리 상태는 지속적으로 보장할 수 없는 부분이며, 코드의 의미가 일관적임을 보장할 수 없는 경우 버전이 교체되어야 함." />
      <comment value="Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.version" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.7" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./codeSystemVersion" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion" />
      </mapping>
    </element>
    <element id="DocumentReference.context.related.identifier.type.coding.code">
      <path value="DocumentReference.context.related.identifier.type.coding.code" />
      <short value="시스템에 정의된 구문(syntax)의 기호(symbol)" />
      <definition value="시스템에 정의된 구문의 기호. 기호는 CodeSystem[코드시스템]에 의해 정의된 구문에서 미리 정의된 코드 또는 표현(expression)일 수 있음. (예: post-coordination)" />
      <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" />
      <requirements value="Need to refer to a particular code in the system." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.code" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="code" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.1" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./code" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code" />
      </mapping>
    </element>
    <element id="DocumentReference.context.related.identifier.type.coding.display">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="DocumentReference.context.related.identifier.type.coding.display" />
      <short value="시스템에 정의된 표현" />
      <definition value="시스템 내 코드의 의미를 시스템의 규칙에 따라 표현한 것을 의미함." />
      <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" />
      <requirements value="Need to be able to carry a human-readable meaning of the code for readers that do not know  the system." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.display" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.2 - but note this is not well followed" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CV.displayName" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName" />
      </mapping>
    </element>
    <element id="DocumentReference.context.related.identifier.type.coding.userSelected">
      <path value="DocumentReference.context.related.identifier.type.coding.userSelected" />
      <short value="해당 코딩 방법이 사용자에 의해 직접 선택되었는지 여부" />
      <definition value="해당 코딩 방법이 사용자에 의해 직접 선택되었음을 나타냄. 즉, 선택 가능한 항목 (코드 혹은 디스플레이) 목록에 존재하지 않음을 나타냄." />
      <comment value="Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely." />
      <requirements value="This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.userSelected" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="boolean" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="Sometimes implied by being first" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CD.codingRationale" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map;   fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [     fhir:source &quot;true&quot;;     fhir:target dt:CDCoding.codingRationale\#O   ]" />
      </mapping>
    </element>
    <element id="DocumentReference.context.related.identifier.type.text">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="DocumentReference.context.related.identifier.type.text" />
      <short value="개념에 대한 일반 텍스트 묘사" />
      <definition value="데이터를 입력한 사용자의 입장에서 보거나/선택하거나/언급한대로의 개념, 혹은 사용자가 의도한 의미를 사람이 사용하는 언어로 표현한 것임." />
      <comment value="Very often the text is the same as a displayName of one of the codings." />
      <requirements value="The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="CodeableConcept.text" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.9. But note many systems use C*E.2 for this" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./originalText[mediaType/code=&quot;text/plain&quot;]/data" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText" />
      </mapping>
    </element>
    <element id="DocumentReference.context.related.identifier.system">
      <path value="DocumentReference.context.related.identifier.system" />
      <short value="식별자 값의 네임스페이스(namespace)" />
      <definition value="설정값에 대한 네임 스페이스 (namespace), 즉 고유한 설정값을 설명하는 URL을 설정함." />
      <comment value="Identifier.system is always case sensitive." />
      <requirements value="There are many sets  of identifiers.  To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.system" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="uri" />
      </type>
      <example>
        <label value="General" />
        <valueUri value="http://www.acme.com/identifiers/patient" />
      </example>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.4 / EI-2-4" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="II.root or Role.id.root" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="./IdentifierType" />
      </mapping>
    </element>
    <element id="DocumentReference.context.related.identifier.value">
      <path value="DocumentReference.context.related.identifier.value" />
      <short value="고유 설정값" />
      <definition value="일반적으로 식별자의 사용과와 관련이 있으며, 시스템 컨텍스트 (context) 내에서 고유한 식별자의 일부분임." />
      <comment value="If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986.  The value's primary purpose is computational mapping.  As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.)  A value formatted for human display can be conveyed using the [Rendered Value extension](extension-rendered-value.html). Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.value" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <example>
        <label value="General" />
        <valueString value="123456" />
      </example>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.1 / EI.1" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root)" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="./Value" />
      </mapping>
    </element>
    <element id="DocumentReference.context.related.identifier.period">
      <path value="DocumentReference.context.related.identifier.period" />
      <short value="식별자의 유효 기간" />
      <definition value="식별자가 사용 가능했거나 가능한 기간을 나타냄." />
      <comment value="A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. &quot;the patient was an inpatient of the hospital for this time range&quot;) or one value from the range applies (e.g. &quot;give to the patient between these two times&quot;).&#xA;&#xA;Period is not used for a duration (a measure of elapsed time). See [Duration](datatypes.html#Duration)." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.period" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="Period" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="per-1" />
        <severity value="error" />
        <human value="If present, start SHALL have a lower value than end" />
        <expression value="start.hasValue().not() or end.hasValue().not() or (start &lt;= end)" />
        <xpath value="not(exists(f:start/@value)) or not(exists(f:end/@value)) or (xs:dateTime(f:start/@value) &lt;= xs:dateTime(f:end/@value))" />
        <source value="http://hl7.org/fhir/StructureDefinition/Period" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="DR" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="IVL&lt;TS&gt;[lowClosed=&quot;true&quot; and highClosed=&quot;true&quot;] or URG&lt;TS&gt;[lowClosed=&quot;true&quot; and highClosed=&quot;true&quot;]" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.7 + CX.8" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="Role.effectiveTime or implied by context" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="./StartDate and ./EndDate" />
      </mapping>
    </element>
    <element id="DocumentReference.context.related.identifier.period.id">
      <path value="DocumentReference.context.related.identifier.period.id" />
      <representation value="xmlAttr" />
      <short value="Unique id for inter-element referencing" />
      <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="DocumentReference.context.related.identifier.period.extension">
      <path value="DocumentReference.context.related.identifier.period.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="DocumentReference.context.related.identifier.period.start">
      <path value="DocumentReference.context.related.identifier.period.start" />
      <short value="해당 유효 기간의 시작 시점 (설정된 날짜 포함)" />
      <definition value="해당 유효 기간이 시작되는 시점을 나타냄. 유효 기간은 시작 시점으로 설정된 날짜를 포함함." />
      <comment value="If the low element is missing, the meaning is that the low boundary is not known." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Period.start" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="dateTime" />
      </type>
      <condition value="ele-1" />
      <condition value="per-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="DR.1" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./low" />
      </mapping>
    </element>
    <element id="DocumentReference.context.related.identifier.period.end">
      <path value="DocumentReference.context.related.identifier.period.end" />
      <short value="해당 유효 기간의 종료 시점 (설정된 날짜 포함)" />
      <definition value="기간의 종료. 기간의 종료가 누락된 경우, 인스턴스가 생성될 때 끝이 알려지거나 계획되지 않았음을 의미함. 시작일은 과거일 수 있고 종료일은 미래일 수 있음. 이는 해당 기간이 해당 시간에 종료될 예정임을 의미함" />
      <comment value="The high value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has an end value of 2012-02-03." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Period.end" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="dateTime" />
      </type>
      <meaningWhenMissing value="If the end of the period is missing, it means that the period is ongoing" />
      <condition value="ele-1" />
      <condition value="per-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="DR.2" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./high" />
      </mapping>
    </element>
    <element id="DocumentReference.context.related.identifier.assigner">
      <path value="DocumentReference.context.related.identifier.assigner" />
      <short value="식별자를 발급한 조직 (단순 텍스트 기입 가능)" />
      <definition value="식별자를 발급하고 관리하는 조직을 나타냄." />
      <comment value="The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.assigner" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="Reference" />
        <targetProfile value="http://hl7.org/fhir/StructureDefinition/Organization" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ref-1" />
        <severity value="error" />
        <human value="SHALL have a contained resource if a local reference is provided" />
        <expression value="reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))" />
        <xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Reference" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.4 / (CX.4,CX.9,CX.10)" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="II.assigningAuthorityName but note that this is an improper use by the definition of the field.  Also Role.scoper" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="./IdentifierIssuingAuthority" />
      </mapping>
    </element>
    <element id="DocumentReference.context.related.display">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="DocumentReference.context.related.display" />
      <short value="해당 리소스를 대체하는 텍스트 설명" />
      <definition value="리소스 참조 외에도 리소스를 식별하기 위한 일반 텍스트 설명임." />
      <comment value="This is generally not the same as the Resource.text of the referenced resource.  The purpose is to identify what's being referenced, not to fully describe it." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Reference.display" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
  </snapshot>
  <differential>
    <element id="DocumentReference">
      <path value="DocumentReference" />
      <short value="문서에 대한 참조" />
      <definition value="모든 종류의 문서에 대한 참조임. 문서를 검색하고 관리할 수 있도록 문서에 대한 메타데이타(metadata)를 제공함. 문서의 범위는 MIMI 형식을 가진 모든 직렬화된 개체이므로 공식 환자 중심 문서(CDA), 임상 노트, 스캔 용지 및 정책 텍스트와 같은 비환자 특정 문서를 포함 함." />
      <comment value="일반적으로, FHIR에서 정의한 문서 이외의 문서에 사용됨." />
      <mapping>
        <identity value="workflow" />
        <map value="Event" />
      </mapping>
      <mapping>
        <identity value="fhircomposition" />
        <map value="when describing a Composition" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="Document[classCode=&quot;DOC&quot; and moodCode=&quot;EVN&quot;]" />
      </mapping>
      <mapping>
        <identity value="cda" />
        <map value="when describing a CDA" />
      </mapping>
    </element>
    <element id="DocumentReference.masterIdentifier">
      <path value="DocumentReference.masterIdentifier" />
      <short value="마스터(Master) 버전 특정 식별자" />
      <definition value="문서의 소스에 할당된 문서 식별자. 해당 식별자는 문서의 현재 버전으로 한정됨. 해당 고유 식별자는 다른곳에서 문서의 현재 버전을 식별하는 데 사용될 수 있음." />
      <comment value="CDA 문서 ID확장자 및 경로(root)" />
      <requirements value="The structure and format of this Id shall be consistent with the specification corresponding to the formatCode attribute. (e.g. for a DICOM standard document a 64-character numeric UID, for an HL7 CDA format a serialization of the CDA Document Id extension and root in the form &quot;oid^extension&quot;, where OID is a 64 digits max, and the Id is a 16 UTF-8 char max. If the OID is coded without the extension then the '^' character shall not be included.)." />
      <max value="1" />
      <type>
        <code value="Identifier" />
      </type>
      <isSummary value="true" />
      <mapping>
        <identity value="workflow" />
        <map value="Event.identifier" />
      </mapping>
      <mapping>
        <identity value="w5" />
        <map value="FiveWs.identifier" />
      </mapping>
      <mapping>
        <identity value="fhircomposition" />
        <map value="Composition.identifier" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="TXA-12" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value=".id" />
      </mapping>
      <mapping>
        <identity value="xds" />
        <map value="DocumentEntry.uniqueId" />
      </mapping>
      <mapping>
        <identity value="cda" />
        <map value="ClinicalDocument/id" />
      </mapping>
    </element>
    <element id="DocumentReference.masterIdentifier.use">
      <path value="DocumentReference.masterIdentifier.use" />
      <short value="usual | official | temp | secondary | old (If known)" />
      <definition value="해당 식별자의 목적" />
    </element>
    <element id="DocumentReference.masterIdentifier.type">
      <path value="DocumentReference.masterIdentifier.type" />
      <short value="식별자에 대한 설명" />
      <definition value="특정 목적으로 사용되는 식별자를 결정하기 위해 사용하는 식별자의 코드 유형을 나타냄." />
    </element>
    <element id="DocumentReference.masterIdentifier.type.coding">
      <path value="DocumentReference.masterIdentifier.type.coding" />
      <short value="전문용어체계(terminology system)에 의해 정의된 코드" />
      <definition value="전문용어체계(terminology system)에 의해 정의된 코드를 참조" />
    </element>
    <element id="DocumentReference.masterIdentifier.type.coding.system">
      <path value="DocumentReference.masterIdentifier.type.coding.system" />
      <short value="해당 전문용어체계(terminology system)의 식별" />
      <definition value="코드에서 기호의 의미를 정의하는 CodeSystem[코드시스템]를 식별" />
    </element>
    <element id="DocumentReference.masterIdentifier.type.coding.version">
      <path value="DocumentReference.masterIdentifier.type.coding.version" />
      <short value="해당 시스템의 버전 정보 - 필요한 경우" />
      <definition value="해당 코드를 선택한 시점에 사용된 코드 시스템의 버전임. 올바로 관리된 코드 시스템은 코드의 의미가 버전과 관계없이 일관적이므로 버전을 보고할 필요가 없음. 그러나 코드 시스템의 관리 상태는 지속적으로 보장할 수 없는 부분이며, 코드의 의미가 일관적임을 보장할 수 없는 경우 버전이 교체되어야 함." />
    </element>
    <element id="DocumentReference.masterIdentifier.type.coding.code">
      <path value="DocumentReference.masterIdentifier.type.coding.code" />
      <short value="시스템에 정의된 구문(syntax)의 기호(symbol)" />
      <definition value="시스템에 정의된 구문의 기호. 기호는 CodeSystem[코드시스템]에 의해 정의된 구문에서 미리 정의된 코드 또는 표현(expression)일 수 있음. (예: post-coordination)" />
    </element>
    <element id="DocumentReference.masterIdentifier.type.coding.display">
      <path value="DocumentReference.masterIdentifier.type.coding.display" />
      <short value="시스템에 정의된 표현" />
      <definition value="시스템 내 코드의 의미를 시스템의 규칙에 따라 표현한 것을 의미함." />
    </element>
    <element id="DocumentReference.masterIdentifier.type.coding.userSelected">
      <path value="DocumentReference.masterIdentifier.type.coding.userSelected" />
      <short value="해당 코딩 방법이 사용자에 의해 직접 선택되었는지 여부" />
      <definition value="해당 코딩 방법이 사용자에 의해 직접 선택되었음을 나타냄. 즉, 선택 가능한 항목 (코드 혹은 디스플레이) 목록에 존재하지 않음을 나타냄." />
    </element>
    <element id="DocumentReference.masterIdentifier.type.text">
      <path value="DocumentReference.masterIdentifier.type.text" />
      <short value="개념에 대한 일반 텍스트 묘사" />
      <definition value="데이터를 입력한 사용자의 입장에서 보거나/선택하거나/언급한대로의 개념, 혹은 사용자가 의도한 의미를 사람이 사용하는 언어로 표현한 것임." />
    </element>
    <element id="DocumentReference.masterIdentifier.system">
      <path value="DocumentReference.masterIdentifier.system" />
      <short value="식별자 값의 네임스페이스(namespace)" />
      <definition value="설정값에 대한 네임 스페이스 (namespace), 즉 고유한 설정값을 설명하는 URL을 설정함." />
    </element>
    <element id="DocumentReference.masterIdentifier.value">
      <path value="DocumentReference.masterIdentifier.value" />
      <short value="고유 설정값" />
      <definition value="일반적으로 식별자의 사용과와 관련이 있으며, 시스템 컨텍스트 (context) 내에서 고유한 식별자의 일부분임." />
    </element>
    <element id="DocumentReference.masterIdentifier.period">
      <path value="DocumentReference.masterIdentifier.period" />
      <short value="식별자의 유효 기간" />
      <definition value="식별자가 사용 가능했거나 가능한 기간을 나타냄." />
    </element>
    <element id="DocumentReference.masterIdentifier.period.start">
      <path value="DocumentReference.masterIdentifier.period.start" />
      <short value="해당 유효 기간의 시작 시점 (설정된 날짜 포함)" />
      <definition value="해당 유효 기간이 시작되는 시점을 나타냄. 유효 기간은 시작 시점으로 설정된 날짜를 포함함." />
    </element>
    <element id="DocumentReference.masterIdentifier.period.end">
      <path value="DocumentReference.masterIdentifier.period.end" />
      <short value="해당 유효 기간의 종료 시점 (설정된 날짜 포함)" />
      <definition value="기간의 종료. 기간의 종료가 누락된 경우, 인스턴스가 생성될 때 끝이 알려지거나 계획되지 않았음을 의미함. 시작일은 과거일 수 있고 종료일은 미래일 수 있음. 이는 해당 기간이 해당 시간에 종료될 예정임을 의미함" />
    </element>
    <element id="DocumentReference.masterIdentifier.assigner">
      <path value="DocumentReference.masterIdentifier.assigner" />
      <short value="식별자를 발급한 조직 (단순 텍스트 기입 가능)" />
      <definition value="식별자를 발급하고 관리하는 조직을 나타냄." />
    </element>
    <element id="DocumentReference.masterIdentifier.assigner.reference">
      <path value="DocumentReference.masterIdentifier.assigner.reference" />
      <short value="문안 참조, 상대적, 내부적 혹은 절대적인 URL" />
      <definition value="다른 리소스(resource)을 찾을 수 있는 위치에 대한 참조를 의미함. 해당 참조는 service base URL에 상대적인 경우 상대 참조, 혹은 해당 리소스를 찾을 수 있는 위치인 절대 URL일 수 있음. 해당 참조는 버전에 따라 다를 수 있음. 해당 참조가 FHIR RESTful 서버가 아닌 경우, 버전에 따라 다른 것으로 간주함. 내부 구문 참조('#'으로 시작)는 포함되어 있는 리소스를 참조함." />
    </element>
    <element id="DocumentReference.masterIdentifier.assigner.type">
      <path value="DocumentReference.masterIdentifier.assigner.type" />
      <short value="참조(reference)가 참조하는 유형  (예. &quot;Patient&quot;)" />
      <definition value="참조 대상의 예상 형식임. Reference.type과 Reference.reference가 모두 채워지고 Reference.reference가 FHIR URL이면 두가지 모두 일치해야함. 유형은이 참조가 참조하는 유형 인 리소스 정의의 표준 URL임. 참조는 http://hl7.org/fhir/StructureDefinition/과 관련된 URL임. (예) &quot; 환자 &quot; http://hl7.org/fhir/StructureDefinition/Patient에 대한 참조. 절대 URL은 논리 모델에만 허용됨 (리소스가 아닌 논리 모델의 참조에서만 사용할 수 있음)." />
    </element>
    <element id="DocumentReference.masterIdentifier.assigner.identifier">
      <path value="DocumentReference.masterIdentifier.assigner.identifier" />
      <short value="문안 참조를 알 수 없는 경우의 논리 참조 (logical reference)" />
      <definition value="대상 리소스의 식별자. 이것은 다른 리소스를 직접 참조할 방법이 없을 때 사용- 해당 앤티티(entity)가 FHIR 서버를 통해 사용할 수 없거나  리소스 작성자가 알려진 식별자를 실제 위치로 변활할 방법이 없기 때문에 이 방법이 사용됨. Reference.identifier가 실제로 FHIR 인스턴스로 노출되는 것을 가르킬(point) 필요는 없지만, FHIR 인스턴스로 노출될 것으로 예상되는 비즈니스 개념을 가리켜야하며, 해당 인스턴스는 참조가 허용되는 FHIR 리소스 유형이여야함." />
    </element>
    <element id="DocumentReference.masterIdentifier.assigner.display">
      <path value="DocumentReference.masterIdentifier.assigner.display" />
      <short value="해당 리소스를 대체하는 텍스트 설명" />
      <definition value="리소스 참조 외에도 리소스를 식별하기 위한 일반 텍스트 설명임." />
    </element>
    <element id="DocumentReference.identifier">
      <path value="DocumentReference.identifier" />
      <short value="문서에 대한 기타 식별자." />
      <definition value="문서와 관련된 기타 식별자로 버전과 독립된 식별자를 포함 함." />
      <type>
        <code value="Identifier" />
      </type>
      <isSummary value="true" />
      <mapping>
        <identity value="workflow" />
        <map value="Event.identifier" />
      </mapping>
      <mapping>
        <identity value="w5" />
        <map value="FiveWs.identifier" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="TXA-16?" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value=".id / .setId" />
      </mapping>
      <mapping>
        <identity value="xds" />
        <map value="DocumentEntry.entryUUID" />
      </mapping>
    </element>
    <element id="DocumentReference.identifier.use">
      <path value="DocumentReference.identifier.use" />
      <short value="usual | official | temp | secondary | old (If known)" />
      <definition value="해당 식별자의 목적" />
    </element>
    <element id="DocumentReference.identifier.type">
      <path value="DocumentReference.identifier.type" />
      <short value="식별자에 대한 설명" />
      <definition value="특정 목적으로 사용되는 식별자를 결정하기 위해 사용하는 식별자의 코드 유형을 나타냄." />
    </element>
    <element id="DocumentReference.identifier.type.coding">
      <path value="DocumentReference.identifier.type.coding" />
      <short value="전문용어체계(terminology system)에 의해 정의된 코드" />
      <definition value="전문용어체계(terminology system)에 의해 정의된 코드를 참조" />
    </element>
    <element id="DocumentReference.identifier.type.coding.system">
      <path value="DocumentReference.identifier.type.coding.system" />
      <short value="해당 전문용어체계(terminology system)의 식별" />
      <definition value="코드에서 기호의 의미를 정의하는 CodeSystem[코드시스템]를 식별" />
    </element>
    <element id="DocumentReference.identifier.type.coding.version">
      <path value="DocumentReference.identifier.type.coding.version" />
      <short value="해당 시스템의 버전 정보 - 필요한 경우" />
      <definition value="해당 코드를 선택한 시점에 사용된 코드 시스템의 버전임. 올바로 관리된 코드 시스템은 코드의 의미가 버전과 관계없이 일관적이므로 버전을 보고할 필요가 없음. 그러나 코드 시스템의 관리 상태는 지속적으로 보장할 수 없는 부분이며, 코드의 의미가 일관적임을 보장할 수 없는 경우 버전이 교체되어야 함." />
    </element>
    <element id="DocumentReference.identifier.type.coding.code">
      <path value="DocumentReference.identifier.type.coding.code" />
      <short value="시스템에 정의된 구문(syntax)의 기호(symbol)" />
      <definition value="시스템에 정의된 구문의 기호. 기호는 CodeSystem[코드시스템]에 의해 정의된 구문에서 미리 정의된 코드 또는 표현(expression)일 수 있음. (예: post-coordination)" />
    </element>
    <element id="DocumentReference.identifier.type.coding.display">
      <path value="DocumentReference.identifier.type.coding.display" />
      <short value="시스템에 정의된 표현" />
      <definition value="시스템 내 코드의 의미를 시스템의 규칙에 따라 표현한 것을 의미함." />
    </element>
    <element id="DocumentReference.identifier.type.coding.userSelected">
      <path value="DocumentReference.identifier.type.coding.userSelected" />
      <short value="해당 코딩 방법이 사용자에 의해 직접 선택되었는지 여부" />
      <definition value="해당 코딩 방법이 사용자에 의해 직접 선택되었음을 나타냄. 즉, 선택 가능한 항목 (코드 혹은 디스플레이) 목록에 존재하지 않음을 나타냄." />
    </element>
    <element id="DocumentReference.identifier.type.text">
      <path value="DocumentReference.identifier.type.text" />
      <short value="개념에 대한 일반 텍스트 묘사" />
      <definition value="데이터를 입력한 사용자의 입장에서 보거나/선택하거나/언급한대로의 개념, 혹은 사용자가 의도한 의미를 사람이 사용하는 언어로 표현한 것임." />
    </element>
    <element id="DocumentReference.identifier.system">
      <path value="DocumentReference.identifier.system" />
      <short value="식별자 값의 네임스페이스(namespace)" />
      <definition value="설정값에 대한 네임 스페이스 (namespace), 즉 고유한 설정값을 설명하는 URL을 설정함." />
    </element>
    <element id="DocumentReference.identifier.value">
      <path value="DocumentReference.identifier.value" />
      <short value="고유 설정값" />
      <definition value="일반적으로 식별자의 사용과와 관련이 있으며, 시스템 컨텍스트 (context) 내에서 고유한 식별자의 일부분임." />
    </element>
    <element id="DocumentReference.identifier.period">
      <path value="DocumentReference.identifier.period" />
      <short value="식별자의 유효 기간" />
      <definition value="식별자가 사용 가능했거나 가능한 기간을 나타냄." />
    </element>
    <element id="DocumentReference.identifier.period.start">
      <path value="DocumentReference.identifier.period.start" />
      <short value="해당 유효 기간의 시작 시점 (설정된 날짜 포함)" />
      <definition value="해당 유효 기간이 시작되는 시점을 나타냄. 유효 기간은 시작 시점으로 설정된 날짜를 포함함." />
    </element>
    <element id="DocumentReference.identifier.period.end">
      <path value="DocumentReference.identifier.period.end" />
      <short value="해당 유효 기간의 종료 시점 (설정된 날짜 포함)" />
      <definition value="기간의 종료. 기간의 종료가 누락된 경우, 인스턴스가 생성될 때 끝이 알려지거나 계획되지 않았음을 의미함. 시작일은 과거일 수 있고 종료일은 미래일 수 있음. 이는 해당 기간이 해당 시간에 종료될 예정임을 의미함" />
    </element>
    <element id="DocumentReference.identifier.assigner">
      <path value="DocumentReference.identifier.assigner" />
      <short value="식별자를 발급한 조직 (단순 텍스트 기입 가능)" />
      <definition value="식별자를 발급하고 관리하는 조직을 나타냄." />
    </element>
    <element id="DocumentReference.identifier.assigner.reference">
      <path value="DocumentReference.identifier.assigner.reference" />
      <short value="문안 참조, 상대적, 내부적 혹은 절대적인 URL" />
      <definition value="다른 리소스(resource)을 찾을 수 있는 위치에 대한 참조를 의미함. 해당 참조는 service base URL에 상대적인 경우 상대 참조, 혹은 해당 리소스를 찾을 수 있는 위치인 절대 URL일 수 있음. 해당 참조는 버전에 따라 다를 수 있음. 해당 참조가 FHIR RESTful 서버가 아닌 경우, 버전에 따라 다른 것으로 간주함. 내부 구문 참조('#'으로 시작)는 포함되어 있는 리소스를 참조함." />
    </element>
    <element id="DocumentReference.identifier.assigner.type">
      <path value="DocumentReference.identifier.assigner.type" />
      <short value="참조(reference)가 참조하는 유형  (예. &quot;Patient&quot;)" />
      <definition value="참조 대상의 예상 형식임. Reference.type과 Reference.reference가 모두 채워지고 Reference.reference가 FHIR URL이면 두가지 모두 일치해야함. 유형은이 참조가 참조하는 유형 인 리소스 정의의 표준 URL임. 참조는 http://hl7.org/fhir/StructureDefinition/과 관련된 URL임. (예) &quot; 환자 &quot; http://hl7.org/fhir/StructureDefinition/Patient에 대한 참조. 절대 URL은 논리 모델에만 허용됨 (리소스가 아닌 논리 모델의 참조에서만 사용할 수 있음)." />
    </element>
    <element id="DocumentReference.identifier.assigner.identifier">
      <path value="DocumentReference.identifier.assigner.identifier" />
      <short value="문안 참조를 알 수 없는 경우의 논리 참조 (logical reference)" />
      <definition value="대상 리소스의 식별자. 이것은 다른 리소스를 직접 참조할 방법이 없을 때 사용- 해당 앤티티(entity)가 FHIR 서버를 통해 사용할 수 없거나  리소스 작성자가 알려진 식별자를 실제 위치로 변활할 방법이 없기 때문에 이 방법이 사용됨. Reference.identifier가 실제로 FHIR 인스턴스로 노출되는 것을 가르킬(point) 필요는 없지만, FHIR 인스턴스로 노출될 것으로 예상되는 비즈니스 개념을 가리켜야하며, 해당 인스턴스는 참조가 허용되는 FHIR 리소스 유형이여야함." />
    </element>
    <element id="DocumentReference.identifier.assigner.display">
      <path value="DocumentReference.identifier.assigner.display" />
      <short value="해당 리소스를 대체하는 텍스트 설명" />
      <definition value="리소스 참조 외에도 리소스를 식별하기 위한 일반 텍스트 설명임." />
    </element>
    <element id="DocumentReference.status">
      <path value="DocumentReference.status" />
      <short value="current | superseded | entered-in-error" />
      <definition value="DocumentReference[]의 상태" />
      <comment value="DocumentReference[] 객체의 상태이며 docStatus 요소와 무관할 수 있음. 상태에는 문서 또는 참조가 현재 유효하지 않은 것으로 표시된 코드가 포함되어 있으므로 해당 요소는 수정자(modifier)로 레이블이 지정됨." />
      <min value="1" />
      <max value="1" />
      <type>
        <code value="code" />
      </type>
      <isModifier value="true" />
      <isModifierReason value="This element is labelled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid" />
      <isSummary value="true" />
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="DocumentReferenceStatus" />
        </extension>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-isCommonBinding">
          <valueBoolean value="true" />
        </extension>
        <strength value="required" />
        <description value="The status of the document reference." />
        <valueSet value="http://hl7.org/fhir/ValueSet/document-reference-status|4.0.1" />
      </binding>
      <mapping>
        <identity value="workflow" />
        <map value="Event.status" />
      </mapping>
      <mapping>
        <identity value="w5" />
        <map value="FiveWs.status" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="TXA-19" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="interim: .completionCode=&quot;IN&quot; &amp; ./statusCode[isNormalDatatype()]=&quot;active&quot;;  final: .completionCode=&quot;AU&quot; &amp;&amp;  ./statusCode[isNormalDatatype()]=&quot;complete&quot; and not(./inboundRelationship[typeCode=&quot;SUBJ&quot; and isNormalActRelationship()]/source[subsumesCode(&quot;ActClass#CACT&quot;) and moodCode=&quot;EVN&quot; and domainMember(&quot;ReviseDocument&quot;, code) and isNormalAct()]);  amended: .completionCode=&quot;AU&quot; &amp;&amp;  ./statusCode[isNormalDatatype()]=&quot;complete&quot; and ./inboundRelationship[typeCode=&quot;SUBJ&quot; and isNormalActRelationship()]/source[subsumesCode(&quot;ActClass#CACT&quot;) and moodCode=&quot;EVN&quot; and domainMember(&quot;ReviseDocument&quot;, code) and isNormalAct() and statusCode=&quot;completed&quot;];  withdrawn : .completionCode=NI &amp;&amp;  ./statusCode[isNormalDatatype()]=&quot;obsolete&quot;" />
      </mapping>
      <mapping>
        <identity value="xds" />
        <map value="DocumentEntry.availabilityStatus" />
      </mapping>
    </element>
    <element id="DocumentReference.docStatus">
      <path value="DocumentReference.docStatus" />
      <short value="preliminary | final | amended | entered-in-error" />
      <definition value="근본적인 문서의 상태." />
      <comment value="지정된 문서는 다양한 라이프사이클(lifecycle) 상태에 있을 수 있음." />
      <max value="1" />
      <type>
        <code value="code" />
      </type>
      <isSummary value="true" />
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="ReferredDocumentStatus" />
        </extension>
        <strength value="required" />
        <description value="Status of the underlying document." />
        <valueSet value="http://hl7.org/fhir/ValueSet/composition-status|4.0.1" />
      </binding>
      <mapping>
        <identity value="w5" />
        <map value="FiveWs.status" />
      </mapping>
      <mapping>
        <identity value="fhircomposition" />
        <map value="Composition.status" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="TXA-17" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value=".statusCode" />
      </mapping>
    </element>
    <element id="DocumentReference.type">
      <path value="DocumentReference.type" />
      <short value="문서의 종류 (가능한 경우 LOINC(" />
      <definition value="참조된 특정 문서의 유형을 지정함 (예: 기록 및 물리적, 퇴원 요약, 진행 참고). 일반적으로 문서를 참조하는 목적과 동일함." />
      <comment value="정확한 문서 유형을 설명하는 주요 메타데이터(metadata) 요소. 사용자가 문서 목록을 볼 때 해당 문서가 관심 사항인지 여부를 평가하는 데 도움이 됨." />
      <max value="1" />
      <type>
        <code value="CodeableConcept" />
      </type>
      <isSummary value="true" />
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="DocumentC80Type" />
        </extension>
        <strength value="preferred" />
        <description value="Precise type of clinical document." />
        <valueSet value="http://hl7.org/fhir/ValueSet/c80-doc-typecodes" />
      </binding>
      <mapping>
        <identity value="workflow" />
        <map value="Event.code" />
      </mapping>
      <mapping>
        <identity value="w5" />
        <map value="FiveWs.class" />
      </mapping>
      <mapping>
        <identity value="fhircomposition" />
        <map value="Composition.type" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="TXA-2" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./code" />
      </mapping>
      <mapping>
        <identity value="xds" />
        <map value="DocumentEntry.type" />
      </mapping>
      <mapping>
        <identity value="cda" />
        <map value="ClinicalDocument/code/@code &#xA;&#xA;The typeCode should be mapped from the ClinicalDocument/code element to a set of document type codes configured in the affinity domain. One suggested coding system to use for typeCode is LOINC, in which case the mapping step can be omitted." />
      </mapping>
    </element>
    <element id="DocumentReference.type.coding">
      <path value="DocumentReference.type.coding" />
      <short value="전문용어체계(terminology system)에 의해 정의된 코드" />
      <definition value="전문용어체계(terminology system)에 의해 정의된 코드를 참조" />
    </element>
    <element id="DocumentReference.type.coding.system">
      <path value="DocumentReference.type.coding.system" />
      <short value="해당 전문용어체계(terminology system)의 식별" />
      <definition value="코드에서 기호의 의미를 정의하는 CodeSystem[코드시스템]를 식별" />
    </element>
    <element id="DocumentReference.type.coding.version">
      <path value="DocumentReference.type.coding.version" />
      <short value="해당 시스템의 버전 정보 - 필요한 경우" />
      <definition value="해당 코드를 선택한 시점에 사용된 코드 시스템의 버전임. 올바로 관리된 코드 시스템은 코드의 의미가 버전과 관계없이 일관적이므로 버전을 보고할 필요가 없음. 그러나 코드 시스템의 관리 상태는 지속적으로 보장할 수 없는 부분이며, 코드의 의미가 일관적임을 보장할 수 없는 경우 버전이 교체되어야 함." />
    </element>
    <element id="DocumentReference.type.coding.code">
      <path value="DocumentReference.type.coding.code" />
      <short value="시스템에 정의된 구문(syntax)의 기호(symbol)" />
      <definition value="시스템에 정의된 구문의 기호. 기호는 CodeSystem[코드시스템]에 의해 정의된 구문에서 미리 정의된 코드 또는 표현(expression)일 수 있음. (예: post-coordination)" />
    </element>
    <element id="DocumentReference.type.coding.display">
      <path value="DocumentReference.type.coding.display" />
      <short value="시스템에 정의된 표현" />
      <definition value="시스템 내 코드의 의미를 시스템의 규칙에 따라 표현한 것을 의미함." />
    </element>
    <element id="DocumentReference.type.coding.userSelected">
      <path value="DocumentReference.type.coding.userSelected" />
      <short value="해당 코딩 방법이 사용자에 의해 직접 선택되었는지 여부" />
      <definition value="해당 코딩 방법이 사용자에 의해 직접 선택되었음을 나타냄. 즉, 선택 가능한 항목 (코드 혹은 디스플레이) 목록에 존재하지 않음을 나타냄." />
    </element>
    <element id="DocumentReference.type.text">
      <path value="DocumentReference.type.text" />
      <short value="개념에 대한 일반 텍스트 묘사" />
      <definition value="데이터를 입력한 사용자의 입장에서 보거나/선택하거나/언급한대로의 개념, 혹은 사용자가 의도한 의미를 사람이 사용하는 언어로 표현한 것임." />
    </element>
    <element id="DocumentReference.category">
      <path value="DocumentReference.category" />
      <short value="문서의 카테고리화" />
      <definition value="참조된 문서 유형에 대한 카테고리 - 인덱싱 및 검색에 활용 될 수 있음. DocumentReference.type에 지정된 코드로 부터 암시되거나 파생될 수 있음." />
      <comment value="문서의 카테고리 또는 분류를 설명하는 주요 메타데이터(metadata). 사용 방법에 따라 유사한 문서를 분류하는 더 넓은 관점이며, 검색에 사용되는 기본 키(primary key) 임." />
      <alias value="claxs" />
      <type>
        <code value="CodeableConcept" />
      </type>
      <isSummary value="true" />
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="DocumentC80Class" />
        </extension>
        <strength value="example" />
        <description value="High-level kind of a clinical document at a macro level." />
        <valueSet value="http://hl7.org/fhir/ValueSet/document-classcodes" />
      </binding>
      <mapping>
        <identity value="w5" />
        <map value="FiveWs.class" />
      </mapping>
      <mapping>
        <identity value="fhircomposition" />
        <map value="Composition.class" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value=".outboundRelationship[typeCode=&quot;COMP].target[classCode=&quot;LIST&quot;, moodCode=&quot;EVN&quot;].code" />
      </mapping>
      <mapping>
        <identity value="xds" />
        <map value="DocumentEntry.class" />
      </mapping>
      <mapping>
        <identity value="cda" />
        <map value="Derived from a mapping of /ClinicalDocument/code/@code to an Affinity Domain specified coded value to use and coding system. Affinity Domains are encouraged to use the appropriate value for Type of Service, based on the LOINC Type of Service (see Page 53 of the LOINC User's Manual). Must be consistent with /ClinicalDocument/code/@code" />
      </mapping>
    </element>
    <element id="DocumentReference.category.coding">
      <path value="DocumentReference.category.coding" />
      <short value="전문용어체계(terminology system)에 의해 정의된 코드" />
      <definition value="전문용어체계(terminology system)에 의해 정의된 코드를 참조" />
    </element>
    <element id="DocumentReference.category.coding.system">
      <path value="DocumentReference.category.coding.system" />
      <short value="해당 전문용어체계(terminology system)의 식별" />
      <definition value="코드에서 기호의 의미를 정의하는 CodeSystem[코드시스템]를 식별" />
    </element>
    <element id="DocumentReference.category.coding.version">
      <path value="DocumentReference.category.coding.version" />
      <short value="해당 시스템의 버전 정보 - 필요한 경우" />
      <definition value="해당 코드를 선택한 시점에 사용된 코드 시스템의 버전임. 올바로 관리된 코드 시스템은 코드의 의미가 버전과 관계없이 일관적이므로 버전을 보고할 필요가 없음. 그러나 코드 시스템의 관리 상태는 지속적으로 보장할 수 없는 부분이며, 코드의 의미가 일관적임을 보장할 수 없는 경우 버전이 교체되어야 함." />
    </element>
    <element id="DocumentReference.category.coding.code">
      <path value="DocumentReference.category.coding.code" />
      <short value="시스템에 정의된 구문(syntax)의 기호(symbol)" />
      <definition value="시스템에 정의된 구문의 기호. 기호는 CodeSystem[코드시스템]에 의해 정의된 구문에서 미리 정의된 코드 또는 표현(expression)일 수 있음. (예: post-coordination)" />
    </element>
    <element id="DocumentReference.category.coding.display">
      <path value="DocumentReference.category.coding.display" />
      <short value="시스템에 정의된 표현" />
      <definition value="시스템 내 코드의 의미를 시스템의 규칙에 따라 표현한 것을 의미함." />
    </element>
    <element id="DocumentReference.category.coding.userSelected">
      <path value="DocumentReference.category.coding.userSelected" />
      <short value="해당 코딩 방법이 사용자에 의해 직접 선택되었는지 여부" />
      <definition value="해당 코딩 방법이 사용자에 의해 직접 선택되었음을 나타냄. 즉, 선택 가능한 항목 (코드 혹은 디스플레이) 목록에 존재하지 않음을 나타냄." />
    </element>
    <element id="DocumentReference.category.text">
      <path value="DocumentReference.category.text" />
      <short value="개념에 대한 일반 텍스트 묘사" />
      <definition value="데이터를 입력한 사용자의 입장에서 보거나/선택하거나/언급한대로의 개념, 혹은 사용자가 의도한 의미를 사람이 사용하는 언어로 표현한 것임." />
    </element>
    <element id="DocumentReference.subject">
      <path value="DocumentReference.subject" />
      <short value="문서의 대상 (사람/사물)" />
      <definition value="문서가 무엇 혹은 누구에 대한 것인지를 나타냄. 문서는 개인(환자 또는 의료 practitioner[](healthcare prctitioner)), 기기(예 : 기계), 또는 피실험자 그룹(예 : 농장 동물 무리에 대한 문서 또는 공통 노출을 공유하는 환자 그룹)에 대한 문서일 수 있음." />
      <max value="1" />
      <type>
        <code value="Reference" />
        <targetProfile value="http://hl7.org/fhir/StructureDefinition/Patient" />
        <targetProfile value="http://hl7.org/fhir/StructureDefinition/Practitioner" />
        <targetProfile value="http://hl7.org/fhir/StructureDefinition/Group" />
        <targetProfile value="http://hl7.org/fhir/StructureDefinition/Device" />
      </type>
      <isSummary value="true" />
      <mapping>
        <identity value="workflow" />
        <map value="Event.subject" />
      </mapping>
      <mapping>
        <identity value="w5" />
        <map value="FiveWs.subject[x]" />
      </mapping>
      <mapping>
        <identity value="fhircomposition" />
        <map value="Composition.subject" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="PID-3 (No standard way to define a Practitioner or Group subject in HL7 v2 MDM message)" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value=".participation[typeCode=&quot;SBJ&quot;].role[typeCode=&quot;PAT&quot;]" />
      </mapping>
      <mapping>
        <identity value="xds" />
        <map value="DocumentEntry.patientId" />
      </mapping>
      <mapping>
        <identity value="cda" />
        <map value="ClinicalDocument/recordTarget/" />
      </mapping>
      <mapping>
        <identity value="w5" />
        <map value="FiveWs.subject" />
      </mapping>
    </element>
    <element id="DocumentReference.subject.reference">
      <path value="DocumentReference.subject.reference" />
      <short value="문안 참조, 상대적, 내부적 혹은 절대적인 URL" />
      <definition value="다른 리소스(resource)을 찾을 수 있는 위치에 대한 참조를 의미함. 해당 참조는 service base URL에 상대적인 경우 상대 참조, 혹은 해당 리소스를 찾을 수 있는 위치인 절대 URL일 수 있음. 해당 참조는 버전에 따라 다를 수 있음. 해당 참조가 FHIR RESTful 서버가 아닌 경우, 버전에 따라 다른 것으로 간주함. 내부 구문 참조('#'으로 시작)는 포함되어 있는 리소스를 참조함." />
    </element>
    <element id="DocumentReference.subject.type">
      <path value="DocumentReference.subject.type" />
      <short value="참조(reference)가 참조하는 유형  (예. &quot;Patient&quot;)" />
      <definition value="참조 대상의 예상 형식임. Reference.type과 Reference.reference가 모두 채워지고 Reference.reference가 FHIR URL이면 두가지 모두 일치해야함. 유형은이 참조가 참조하는 유형 인 리소스 정의의 표준 URL임. 참조는 http://hl7.org/fhir/StructureDefinition/과 관련된 URL임. (예) &quot; 환자 &quot; http://hl7.org/fhir/StructureDefinition/Patient에 대한 참조. 절대 URL은 논리 모델에만 허용됨 (리소스가 아닌 논리 모델의 참조에서만 사용할 수 있음)." />
    </element>
    <element id="DocumentReference.subject.identifier">
      <path value="DocumentReference.subject.identifier" />
      <short value="문안 참조를 알 수 없는 경우의 논리 참조 (logical reference)" />
      <definition value="대상 리소스의 식별자. 이것은 다른 리소스를 직접 참조할 방법이 없을 때 사용- 해당 앤티티(entity)가 FHIR 서버를 통해 사용할 수 없거나  리소스 작성자가 알려진 식별자를 실제 위치로 변활할 방법이 없기 때문에 이 방법이 사용됨. Reference.identifier가 실제로 FHIR 인스턴스로 노출되는 것을 가르킬(point) 필요는 없지만, FHIR 인스턴스로 노출될 것으로 예상되는 비즈니스 개념을 가리켜야하며, 해당 인스턴스는 참조가 허용되는 FHIR 리소스 유형이여야함." />
    </element>
    <element id="DocumentReference.subject.identifier.use">
      <path value="DocumentReference.subject.identifier.use" />
      <short value="usual | official | temp | secondary | old (If known)" />
      <definition value="해당 식별자의 목적" />
    </element>
    <element id="DocumentReference.subject.identifier.type">
      <path value="DocumentReference.subject.identifier.type" />
      <short value="식별자에 대한 설명" />
      <definition value="특정 목적으로 사용되는 식별자를 결정하기 위해 사용하는 식별자의 코드 유형을 나타냄." />
    </element>
    <element id="DocumentReference.subject.identifier.type.coding">
      <path value="DocumentReference.subject.identifier.type.coding" />
      <short value="전문용어체계(terminology system)에 의해 정의된 코드" />
      <definition value="전문용어체계(terminology system)에 의해 정의된 코드를 참조" />
    </element>
    <element id="DocumentReference.subject.identifier.type.coding.system">
      <path value="DocumentReference.subject.identifier.type.coding.system" />
      <short value="해당 전문용어체계(terminology system)의 식별" />
      <definition value="코드에서 기호의 의미를 정의하는 CodeSystem[코드시스템]를 식별" />
    </element>
    <element id="DocumentReference.subject.identifier.type.coding.version">
      <path value="DocumentReference.subject.identifier.type.coding.version" />
      <short value="해당 시스템의 버전 정보 - 필요한 경우" />
      <definition value="해당 코드를 선택한 시점에 사용된 코드 시스템의 버전임. 올바로 관리된 코드 시스템은 코드의 의미가 버전과 관계없이 일관적이므로 버전을 보고할 필요가 없음. 그러나 코드 시스템의 관리 상태는 지속적으로 보장할 수 없는 부분이며, 코드의 의미가 일관적임을 보장할 수 없는 경우 버전이 교체되어야 함." />
    </element>
    <element id="DocumentReference.subject.identifier.type.coding.code">
      <path value="DocumentReference.subject.identifier.type.coding.code" />
      <short value="시스템에 정의된 구문(syntax)의 기호(symbol)" />
      <definition value="시스템에 정의된 구문의 기호. 기호는 CodeSystem[코드시스템]에 의해 정의된 구문에서 미리 정의된 코드 또는 표현(expression)일 수 있음. (예: post-coordination)" />
    </element>
    <element id="DocumentReference.subject.identifier.type.coding.display">
      <path value="DocumentReference.subject.identifier.type.coding.display" />
      <short value="시스템에 정의된 표현" />
      <definition value="시스템 내 코드의 의미를 시스템의 규칙에 따라 표현한 것을 의미함." />
    </element>
    <element id="DocumentReference.subject.identifier.type.coding.userSelected">
      <path value="DocumentReference.subject.identifier.type.coding.userSelected" />
      <short value="해당 코딩 방법이 사용자에 의해 직접 선택되었는지 여부" />
      <definition value="해당 코딩 방법이 사용자에 의해 직접 선택되었음을 나타냄. 즉, 선택 가능한 항목 (코드 혹은 디스플레이) 목록에 존재하지 않음을 나타냄." />
    </element>
    <element id="DocumentReference.subject.identifier.type.text">
      <path value="DocumentReference.subject.identifier.type.text" />
      <short value="개념에 대한 일반 텍스트 묘사" />
      <definition value="데이터를 입력한 사용자의 입장에서 보거나/선택하거나/언급한대로의 개념, 혹은 사용자가 의도한 의미를 사람이 사용하는 언어로 표현한 것임." />
    </element>
    <element id="DocumentReference.subject.identifier.system">
      <path value="DocumentReference.subject.identifier.system" />
      <short value="식별자 값의 네임스페이스(namespace)" />
      <definition value="설정값에 대한 네임 스페이스 (namespace), 즉 고유한 설정값을 설명하는 URL을 설정함." />
    </element>
    <element id="DocumentReference.subject.identifier.value">
      <path value="DocumentReference.subject.identifier.value" />
      <short value="고유 설정값" />
      <definition value="일반적으로 식별자의 사용과와 관련이 있으며, 시스템 컨텍스트 (context) 내에서 고유한 식별자의 일부분임." />
    </element>
    <element id="DocumentReference.subject.identifier.period">
      <path value="DocumentReference.subject.identifier.period" />
      <short value="식별자의 유효 기간" />
      <definition value="식별자가 사용 가능했거나 가능한 기간을 나타냄." />
    </element>
    <element id="DocumentReference.subject.identifier.period.start">
      <path value="DocumentReference.subject.identifier.period.start" />
      <short value="해당 유효 기간의 시작 시점 (설정된 날짜 포함)" />
      <definition value="해당 유효 기간이 시작되는 시점을 나타냄. 유효 기간은 시작 시점으로 설정된 날짜를 포함함." />
    </element>
    <element id="DocumentReference.subject.identifier.period.end">
      <path value="DocumentReference.subject.identifier.period.end" />
      <short value="해당 유효 기간의 종료 시점 (설정된 날짜 포함)" />
      <definition value="기간의 종료. 기간의 종료가 누락된 경우, 인스턴스가 생성될 때 끝이 알려지거나 계획되지 않았음을 의미함. 시작일은 과거일 수 있고 종료일은 미래일 수 있음. 이는 해당 기간이 해당 시간에 종료될 예정임을 의미함" />
    </element>
    <element id="DocumentReference.subject.identifier.assigner">
      <path value="DocumentReference.subject.identifier.assigner" />
      <short value="식별자를 발급한 조직 (단순 텍스트 기입 가능)" />
      <definition value="식별자를 발급하고 관리하는 조직을 나타냄." />
    </element>
    <element id="DocumentReference.subject.display">
      <path value="DocumentReference.subject.display" />
      <short value="해당 리소스를 대체하는 텍스트 설명" />
      <definition value="리소스 참조 외에도 리소스를 식별하기 위한 일반 텍스트 설명임." />
    </element>
    <element id="DocumentReference.date">
      <path value="DocumentReference.date" />
      <short value="DocumentReference[]가 생성된 시점" />
      <definition value="DocumentReference[]가 생성된 시점" />
      <comment value="참조/인덱싱 (Reference/indexing) 시간은 버전 추적, 구성 및 검색에 사용 됨." />
      <alias value="indexed" />
      <max value="1" />
      <type>
        <code value="instant" />
      </type>
      <isSummary value="true" />
      <mapping>
        <identity value="workflow" />
        <map value="Event.occurrence[x]" />
      </mapping>
      <mapping>
        <identity value="w5" />
        <map value="FiveWs.recorded" />
      </mapping>
      <mapping>
        <identity value="fhircomposition" />
        <map value="Composition.date" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value=".availabilityTime[type=&quot;TS&quot;]" />
      </mapping>
    </element>
    <element id="DocumentReference.author">
      <path value="DocumentReference.author" />
      <short value="문서에 권한이 있는 사람 혹은 대상" />
      <definition value="문서에 정보를 추가할 책임이 있는 사용자를 식별함." />
      <comment value="실제 데이터 입력을 수행한 사람 (예: 타자기 사용자(typist)) 또는 소스(정보제공자)가 반드시 필요하진 않음." />
      <type>
        <code value="Reference" />
        <targetProfile value="http://hl7.org/fhir/StructureDefinition/Practitioner" />
        <targetProfile value="http://hl7.org/fhir/StructureDefinition/PractitionerRole" />
        <targetProfile value="http://hl7.org/fhir/StructureDefinition/Organization" />
        <targetProfile value="http://hl7.org/fhir/StructureDefinition/Device" />
        <targetProfile value="http://hl7.org/fhir/StructureDefinition/Patient" />
        <targetProfile value="http://hl7.org/fhir/StructureDefinition/RelatedPerson" />
      </type>
      <isSummary value="true" />
      <mapping>
        <identity value="workflow" />
        <map value="Event.performer.actor" />
      </mapping>
      <mapping>
        <identity value="fhircomposition" />
        <map value="Composition.author" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="TXA-9 (No standard way to indicate a Device in HL7 v2 MDM message)" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value=".participation[typeCode=&quot;AUT&quot;].role[classCode=&quot;ASSIGNED&quot;]" />
      </mapping>
      <mapping>
        <identity value="xds" />
        <map value="DocumentEntry.author" />
      </mapping>
      <mapping>
        <identity value="cda" />
        <map value="ClinicalDocument/author" />
      </mapping>
    </element>
    <element id="DocumentReference.author.reference">
      <path value="DocumentReference.author.reference" />
      <short value="문안 참조, 상대적, 내부적 혹은 절대적인 URL" />
      <definition value="다른 리소스(resource)을 찾을 수 있는 위치에 대한 참조를 의미함. 해당 참조는 service base URL에 상대적인 경우 상대 참조, 혹은 해당 리소스를 찾을 수 있는 위치인 절대 URL일 수 있음. 해당 참조는 버전에 따라 다를 수 있음. 해당 참조가 FHIR RESTful 서버가 아닌 경우, 버전에 따라 다른 것으로 간주함. 내부 구문 참조('#'으로 시작)는 포함되어 있는 리소스를 참조함." />
    </element>
    <element id="DocumentReference.author.type">
      <path value="DocumentReference.author.type" />
      <short value="참조(reference)가 참조하는 유형  (예. &quot;Patient&quot;)" />
      <definition value="참조 대상의 예상 형식임. Reference.type과 Reference.reference가 모두 채워지고 Reference.reference가 FHIR URL이면 두가지 모두 일치해야함. 유형은이 참조가 참조하는 유형 인 리소스 정의의 표준 URL임. 참조는 http://hl7.org/fhir/StructureDefinition/과 관련된 URL임. (예) &quot; 환자 &quot; http://hl7.org/fhir/StructureDefinition/Patient에 대한 참조. 절대 URL은 논리 모델에만 허용됨 (리소스가 아닌 논리 모델의 참조에서만 사용할 수 있음)." />
    </element>
    <element id="DocumentReference.author.identifier">
      <path value="DocumentReference.author.identifier" />
      <short value="문안 참조를 알 수 없는 경우의 논리 참조 (logical reference)" />
      <definition value="대상 리소스의 식별자. 이것은 다른 리소스를 직접 참조할 방법이 없을 때 사용- 해당 앤티티(entity)가 FHIR 서버를 통해 사용할 수 없거나  리소스 작성자가 알려진 식별자를 실제 위치로 변활할 방법이 없기 때문에 이 방법이 사용됨. Reference.identifier가 실제로 FHIR 인스턴스로 노출되는 것을 가르킬(point) 필요는 없지만, FHIR 인스턴스로 노출될 것으로 예상되는 비즈니스 개념을 가리켜야하며, 해당 인스턴스는 참조가 허용되는 FHIR 리소스 유형이여야함." />
    </element>
    <element id="DocumentReference.author.identifier.use">
      <path value="DocumentReference.author.identifier.use" />
      <short value="usual | official | temp | secondary | old (If known)" />
      <definition value="해당 식별자의 목적" />
    </element>
    <element id="DocumentReference.author.identifier.type">
      <path value="DocumentReference.author.identifier.type" />
      <short value="식별자에 대한 설명" />
      <definition value="특정 목적으로 사용되는 식별자를 결정하기 위해 사용하는 식별자의 코드 유형을 나타냄." />
    </element>
    <element id="DocumentReference.author.identifier.type.coding">
      <path value="DocumentReference.author.identifier.type.coding" />
      <short value="전문용어체계(terminology system)에 의해 정의된 코드" />
      <definition value="전문용어체계(terminology system)에 의해 정의된 코드를 참조" />
    </element>
    <element id="DocumentReference.author.identifier.type.coding.system">
      <path value="DocumentReference.author.identifier.type.coding.system" />
      <short value="해당 전문용어체계(terminology system)의 식별" />
      <definition value="코드에서 기호의 의미를 정의하는 CodeSystem[코드시스템]를 식별" />
    </element>
    <element id="DocumentReference.author.identifier.type.coding.version">
      <path value="DocumentReference.author.identifier.type.coding.version" />
      <short value="해당 시스템의 버전 정보 - 필요한 경우" />
      <definition value="해당 코드를 선택한 시점에 사용된 코드 시스템의 버전임. 올바로 관리된 코드 시스템은 코드의 의미가 버전과 관계없이 일관적이므로 버전을 보고할 필요가 없음. 그러나 코드 시스템의 관리 상태는 지속적으로 보장할 수 없는 부분이며, 코드의 의미가 일관적임을 보장할 수 없는 경우 버전이 교체되어야 함." />
    </element>
    <element id="DocumentReference.author.identifier.type.coding.code">
      <path value="DocumentReference.author.identifier.type.coding.code" />
      <short value="시스템에 정의된 구문(syntax)의 기호(symbol)" />
      <definition value="시스템에 정의된 구문의 기호. 기호는 CodeSystem[코드시스템]에 의해 정의된 구문에서 미리 정의된 코드 또는 표현(expression)일 수 있음. (예: post-coordination)" />
    </element>
    <element id="DocumentReference.author.identifier.type.coding.display">
      <path value="DocumentReference.author.identifier.type.coding.display" />
      <short value="시스템에 정의된 표현" />
      <definition value="시스템 내 코드의 의미를 시스템의 규칙에 따라 표현한 것을 의미함." />
    </element>
    <element id="DocumentReference.author.identifier.type.coding.userSelected">
      <path value="DocumentReference.author.identifier.type.coding.userSelected" />
      <short value="해당 코딩 방법이 사용자에 의해 직접 선택되었는지 여부" />
      <definition value="해당 코딩 방법이 사용자에 의해 직접 선택되었음을 나타냄. 즉, 선택 가능한 항목 (코드 혹은 디스플레이) 목록에 존재하지 않음을 나타냄." />
    </element>
    <element id="DocumentReference.author.identifier.type.text">
      <path value="DocumentReference.author.identifier.type.text" />
      <short value="개념에 대한 일반 텍스트 묘사" />
      <definition value="데이터를 입력한 사용자의 입장에서 보거나/선택하거나/언급한대로의 개념, 혹은 사용자가 의도한 의미를 사람이 사용하는 언어로 표현한 것임." />
    </element>
    <element id="DocumentReference.author.identifier.system">
      <path value="DocumentReference.author.identifier.system" />
      <short value="식별자 값의 네임스페이스(namespace)" />
      <definition value="설정값에 대한 네임 스페이스 (namespace), 즉 고유한 설정값을 설명하는 URL을 설정함." />
    </element>
    <element id="DocumentReference.author.identifier.value">
      <path value="DocumentReference.author.identifier.value" />
      <short value="고유 설정값" />
      <definition value="일반적으로 식별자의 사용과와 관련이 있으며, 시스템 컨텍스트 (context) 내에서 고유한 식별자의 일부분임." />
    </element>
    <element id="DocumentReference.author.identifier.period">
      <path value="DocumentReference.author.identifier.period" />
      <short value="식별자의 유효 기간" />
      <definition value="식별자가 사용 가능했거나 가능한 기간을 나타냄." />
    </element>
    <element id="DocumentReference.author.identifier.period.start">
      <path value="DocumentReference.author.identifier.period.start" />
      <short value="해당 유효 기간의 시작 시점 (설정된 날짜 포함)" />
      <definition value="해당 유효 기간이 시작되는 시점을 나타냄. 유효 기간은 시작 시점으로 설정된 날짜를 포함함." />
    </element>
    <element id="DocumentReference.author.identifier.period.end">
      <path value="DocumentReference.author.identifier.period.end" />
      <short value="해당 유효 기간의 종료 시점 (설정된 날짜 포함)" />
      <definition value="기간의 종료. 기간의 종료가 누락된 경우, 인스턴스가 생성될 때 끝이 알려지거나 계획되지 않았음을 의미함. 시작일은 과거일 수 있고 종료일은 미래일 수 있음. 이는 해당 기간이 해당 시간에 종료될 예정임을 의미함" />
    </element>
    <element id="DocumentReference.author.identifier.assigner">
      <path value="DocumentReference.author.identifier.assigner" />
      <short value="식별자를 발급한 조직 (단순 텍스트 기입 가능)" />
      <definition value="식별자를 발급하고 관리하는 조직을 나타냄." />
    </element>
    <element id="DocumentReference.author.display">
      <path value="DocumentReference.author.display" />
      <short value="해당 리소스를 대체하는 텍스트 설명" />
      <definition value="리소스 참조 외에도 리소스를 식별하기 위한 일반 텍스트 설명임." />
    </element>
    <element id="DocumentReference.authenticator">
      <path value="DocumentReference.authenticator" />
      <short value="문서를 인증한 사람 혹은 대상" />
      <definition value="해당 문서의 유효성을 인증하는 개인 또는 조직." />
      <comment value="문서를 합법적으로 인증 또는 증명한 저자 기관 내의 참가자를 나타냄. 법적 인증은 법적 인증자가 문서에 손으로 혹은 전자적으로 서명했음을 의미함." />
      <max value="1" />
      <type>
        <code value="Reference" />
        <targetProfile value="http://hl7.org/fhir/StructureDefinition/Practitioner" />
        <targetProfile value="http://hl7.org/fhir/StructureDefinition/PractitionerRole" />
        <targetProfile value="http://hl7.org/fhir/StructureDefinition/Organization" />
      </type>
      <mapping>
        <identity value="workflow" />
        <map value="Event.performer.actor" />
      </mapping>
      <mapping>
        <identity value="w5" />
        <map value="FiveWs.witness" />
      </mapping>
      <mapping>
        <identity value="fhircomposition" />
        <map value="Composition.attester" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="TXA-10" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value=".participation[typeCode=&quot;AUTHEN&quot;].role[classCode=&quot;ASSIGNED&quot;]" />
      </mapping>
      <mapping>
        <identity value="xds" />
        <map value="DocumentEntry.legalAuthenticator" />
      </mapping>
      <mapping>
        <identity value="cda" />
        <map value="ClinicalDocument/legalAuthenticator" />
      </mapping>
    </element>
    <element id="DocumentReference.authenticator.reference">
      <path value="DocumentReference.authenticator.reference" />
      <short value="문안 참조, 상대적, 내부적 혹은 절대적인 URL" />
      <definition value="다른 리소스(resource)을 찾을 수 있는 위치에 대한 참조를 의미함. 해당 참조는 service base URL에 상대적인 경우 상대 참조, 혹은 해당 리소스를 찾을 수 있는 위치인 절대 URL일 수 있음. 해당 참조는 버전에 따라 다를 수 있음. 해당 참조가 FHIR RESTful 서버가 아닌 경우, 버전에 따라 다른 것으로 간주함. 내부 구문 참조('#'으로 시작)는 포함되어 있는 리소스를 참조함." />
    </element>
    <element id="DocumentReference.authenticator.type">
      <path value="DocumentReference.authenticator.type" />
      <short value="참조(reference)가 참조하는 유형  (예. &quot;Patient&quot;)" />
      <definition value="참조 대상의 예상 형식임. Reference.type과 Reference.reference가 모두 채워지고 Reference.reference가 FHIR URL이면 두가지 모두 일치해야함. 유형은이 참조가 참조하는 유형 인 리소스 정의의 표준 URL임. 참조는 http://hl7.org/fhir/StructureDefinition/과 관련된 URL임. (예) &quot; 환자 &quot; http://hl7.org/fhir/StructureDefinition/Patient에 대한 참조. 절대 URL은 논리 모델에만 허용됨 (리소스가 아닌 논리 모델의 참조에서만 사용할 수 있음)." />
    </element>
    <element id="DocumentReference.authenticator.identifier">
      <path value="DocumentReference.authenticator.identifier" />
      <short value="문안 참조를 알 수 없는 경우의 논리 참조 (logical reference)" />
      <definition value="대상 리소스의 식별자. 이것은 다른 리소스를 직접 참조할 방법이 없을 때 사용- 해당 앤티티(entity)가 FHIR 서버를 통해 사용할 수 없거나  리소스 작성자가 알려진 식별자를 실제 위치로 변활할 방법이 없기 때문에 이 방법이 사용됨. Reference.identifier가 실제로 FHIR 인스턴스로 노출되는 것을 가르킬(point) 필요는 없지만, FHIR 인스턴스로 노출될 것으로 예상되는 비즈니스 개념을 가리켜야하며, 해당 인스턴스는 참조가 허용되는 FHIR 리소스 유형이여야함." />
    </element>
    <element id="DocumentReference.authenticator.identifier.use">
      <path value="DocumentReference.authenticator.identifier.use" />
      <short value="usual | official | temp | secondary | old (If known)" />
      <definition value="해당 식별자의 목적" />
    </element>
    <element id="DocumentReference.authenticator.identifier.type">
      <path value="DocumentReference.authenticator.identifier.type" />
      <short value="식별자에 대한 설명" />
      <definition value="특정 목적으로 사용되는 식별자를 결정하기 위해 사용하는 식별자의 코드 유형을 나타냄." />
    </element>
    <element id="DocumentReference.authenticator.identifier.type.coding">
      <path value="DocumentReference.authenticator.identifier.type.coding" />
      <short value="전문용어체계(terminology system)에 의해 정의된 코드" />
      <definition value="전문용어체계(terminology system)에 의해 정의된 코드를 참조" />
    </element>
    <element id="DocumentReference.authenticator.identifier.type.coding.system">
      <path value="DocumentReference.authenticator.identifier.type.coding.system" />
      <short value="해당 전문용어체계(terminology system)의 식별" />
      <definition value="코드에서 기호의 의미를 정의하는 CodeSystem[코드시스템]를 식별" />
    </element>
    <element id="DocumentReference.authenticator.identifier.type.coding.version">
      <path value="DocumentReference.authenticator.identifier.type.coding.version" />
      <short value="해당 시스템의 버전 정보 - 필요한 경우" />
      <definition value="해당 코드를 선택한 시점에 사용된 코드 시스템의 버전임. 올바로 관리된 코드 시스템은 코드의 의미가 버전과 관계없이 일관적이므로 버전을 보고할 필요가 없음. 그러나 코드 시스템의 관리 상태는 지속적으로 보장할 수 없는 부분이며, 코드의 의미가 일관적임을 보장할 수 없는 경우 버전이 교체되어야 함." />
    </element>
    <element id="DocumentReference.authenticator.identifier.type.coding.code">
      <path value="DocumentReference.authenticator.identifier.type.coding.code" />
      <short value="시스템에 정의된 구문(syntax)의 기호(symbol)" />
      <definition value="시스템에 정의된 구문의 기호. 기호는 CodeSystem[코드시스템]에 의해 정의된 구문에서 미리 정의된 코드 또는 표현(expression)일 수 있음. (예: post-coordination)" />
    </element>
    <element id="DocumentReference.authenticator.identifier.type.coding.display">
      <path value="DocumentReference.authenticator.identifier.type.coding.display" />
      <short value="시스템에 정의된 표현" />
      <definition value="시스템 내 코드의 의미를 시스템의 규칙에 따라 표현한 것을 의미함." />
    </element>
    <element id="DocumentReference.authenticator.identifier.type.coding.userSelected">
      <path value="DocumentReference.authenticator.identifier.type.coding.userSelected" />
      <short value="해당 코딩 방법이 사용자에 의해 직접 선택되었는지 여부" />
      <definition value="해당 코딩 방법이 사용자에 의해 직접 선택되었음을 나타냄. 즉, 선택 가능한 항목 (코드 혹은 디스플레이) 목록에 존재하지 않음을 나타냄." />
    </element>
    <element id="DocumentReference.authenticator.identifier.type.text">
      <path value="DocumentReference.authenticator.identifier.type.text" />
      <short value="개념에 대한 일반 텍스트 묘사" />
      <definition value="데이터를 입력한 사용자의 입장에서 보거나/선택하거나/언급한대로의 개념, 혹은 사용자가 의도한 의미를 사람이 사용하는 언어로 표현한 것임." />
    </element>
    <element id="DocumentReference.authenticator.identifier.system">
      <path value="DocumentReference.authenticator.identifier.system" />
      <short value="식별자 값의 네임스페이스(namespace)" />
      <definition value="설정값에 대한 네임 스페이스 (namespace), 즉 고유한 설정값을 설명하는 URL을 설정함." />
    </element>
    <element id="DocumentReference.authenticator.identifier.value">
      <path value="DocumentReference.authenticator.identifier.value" />
      <short value="고유 설정값" />
      <definition value="일반적으로 식별자의 사용과와 관련이 있으며, 시스템 컨텍스트 (context) 내에서 고유한 식별자의 일부분임." />
    </element>
    <element id="DocumentReference.authenticator.identifier.period">
      <path value="DocumentReference.authenticator.identifier.period" />
      <short value="식별자의 유효 기간" />
      <definition value="식별자가 사용 가능했거나 가능한 기간을 나타냄." />
    </element>
    <element id="DocumentReference.authenticator.identifier.period.start">
      <path value="DocumentReference.authenticator.identifier.period.start" />
      <short value="해당 유효 기간의 시작 시점 (설정된 날짜 포함)" />
      <definition value="해당 유효 기간이 시작되는 시점을 나타냄. 유효 기간은 시작 시점으로 설정된 날짜를 포함함." />
    </element>
    <element id="DocumentReference.authenticator.identifier.period.end">
      <path value="DocumentReference.authenticator.identifier.period.end" />
      <short value="해당 유효 기간의 종료 시점 (설정된 날짜 포함)" />
      <definition value="기간의 종료. 기간의 종료가 누락된 경우, 인스턴스가 생성될 때 끝이 알려지거나 계획되지 않았음을 의미함. 시작일은 과거일 수 있고 종료일은 미래일 수 있음. 이는 해당 기간이 해당 시간에 종료될 예정임을 의미함" />
    </element>
    <element id="DocumentReference.authenticator.identifier.assigner">
      <path value="DocumentReference.authenticator.identifier.assigner" />
      <short value="식별자를 발급한 조직 (단순 텍스트 기입 가능)" />
      <definition value="식별자를 발급하고 관리하는 조직을 나타냄." />
    </element>
    <element id="DocumentReference.authenticator.display">
      <path value="DocumentReference.authenticator.display" />
      <short value="해당 리소스를 대체하는 텍스트 설명" />
      <definition value="리소스 참조 외에도 리소스를 식별하기 위한 일반 텍스트 설명임." />
    </element>
    <element id="DocumentReference.custodian">
      <path value="DocumentReference.custodian" />
      <short value="문서를 유지하는 조직" />
      <definition value="문서의 지속적인 유지관리 및 액세스(access)를 담당하는 조직 또는 그룹을 식별함." />
      <comment value="현재 버전, 문제보고 위치 등을 찾기 위해 이동할 논리적 조직 (소프트웨어 시스템, 공급업체 또는 부서)을 식별함. 이는 문서의 물리적 위치(URL, 디스크 드라이버 또는 서버)와는 다르며, 호스트는 다른 조직의 관리에 위임될 수 있음." />
      <max value="1" />
      <type>
        <code value="Reference" />
        <targetProfile value="http://hl7.org/fhir/StructureDefinition/Organization" />
      </type>
      <mapping>
        <identity value="workflow" />
        <map value="Event.performer.actor" />
      </mapping>
      <mapping>
        <identity value="fhircomposition" />
        <map value="Composition.custodian" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value=".participation[typeCode=&quot;RCV&quot;].role[classCode=&quot;CUST&quot;].scoper[classCode=&quot;ORG&quot; and determinerCode=&quot;INST&quot;]" />
      </mapping>
    </element>
    <element id="DocumentReference.custodian.reference">
      <path value="DocumentReference.custodian.reference" />
      <short value="문안 참조, 상대적, 내부적 혹은 절대적인 URL" />
      <definition value="다른 리소스(resource)을 찾을 수 있는 위치에 대한 참조를 의미함. 해당 참조는 service base URL에 상대적인 경우 상대 참조, 혹은 해당 리소스를 찾을 수 있는 위치인 절대 URL일 수 있음. 해당 참조는 버전에 따라 다를 수 있음. 해당 참조가 FHIR RESTful 서버가 아닌 경우, 버전에 따라 다른 것으로 간주함. 내부 구문 참조('#'으로 시작)는 포함되어 있는 리소스를 참조함." />
    </element>
    <element id="DocumentReference.custodian.type">
      <path value="DocumentReference.custodian.type" />
      <short value="참조(reference)가 참조하는 유형  (예. &quot;Patient&quot;)" />
      <definition value="참조 대상의 예상 형식임. Reference.type과 Reference.reference가 모두 채워지고 Reference.reference가 FHIR URL이면 두가지 모두 일치해야함. 유형은이 참조가 참조하는 유형 인 리소스 정의의 표준 URL임. 참조는 http://hl7.org/fhir/StructureDefinition/과 관련된 URL임. (예) &quot; 환자 &quot; http://hl7.org/fhir/StructureDefinition/Patient에 대한 참조. 절대 URL은 논리 모델에만 허용됨 (리소스가 아닌 논리 모델의 참조에서만 사용할 수 있음)." />
    </element>
    <element id="DocumentReference.custodian.identifier">
      <path value="DocumentReference.custodian.identifier" />
      <short value="문안 참조를 알 수 없는 경우의 논리 참조 (logical reference)" />
      <definition value="대상 리소스의 식별자. 이것은 다른 리소스를 직접 참조할 방법이 없을 때 사용- 해당 앤티티(entity)가 FHIR 서버를 통해 사용할 수 없거나  리소스 작성자가 알려진 식별자를 실제 위치로 변활할 방법이 없기 때문에 이 방법이 사용됨. Reference.identifier가 실제로 FHIR 인스턴스로 노출되는 것을 가르킬(point) 필요는 없지만, FHIR 인스턴스로 노출될 것으로 예상되는 비즈니스 개념을 가리켜야하며, 해당 인스턴스는 참조가 허용되는 FHIR 리소스 유형이여야함." />
    </element>
    <element id="DocumentReference.custodian.identifier.use">
      <path value="DocumentReference.custodian.identifier.use" />
      <short value="usual | official | temp | secondary | old (If known)" />
      <definition value="해당 식별자의 목적" />
    </element>
    <element id="DocumentReference.custodian.identifier.type">
      <path value="DocumentReference.custodian.identifier.type" />
      <short value="식별자에 대한 설명" />
      <definition value="특정 목적으로 사용되는 식별자를 결정하기 위해 사용하는 식별자의 코드 유형을 나타냄." />
    </element>
    <element id="DocumentReference.custodian.identifier.type.coding">
      <path value="DocumentReference.custodian.identifier.type.coding" />
      <short value="전문용어체계(terminology system)에 의해 정의된 코드" />
      <definition value="전문용어체계(terminology system)에 의해 정의된 코드를 참조" />
    </element>
    <element id="DocumentReference.custodian.identifier.type.coding.system">
      <path value="DocumentReference.custodian.identifier.type.coding.system" />
      <short value="해당 전문용어체계(terminology system)의 식별" />
      <definition value="코드에서 기호의 의미를 정의하는 CodeSystem[코드시스템]를 식별" />
    </element>
    <element id="DocumentReference.custodian.identifier.type.coding.version">
      <path value="DocumentReference.custodian.identifier.type.coding.version" />
      <short value="해당 시스템의 버전 정보 - 필요한 경우" />
      <definition value="해당 코드를 선택한 시점에 사용된 코드 시스템의 버전임. 올바로 관리된 코드 시스템은 코드의 의미가 버전과 관계없이 일관적이므로 버전을 보고할 필요가 없음. 그러나 코드 시스템의 관리 상태는 지속적으로 보장할 수 없는 부분이며, 코드의 의미가 일관적임을 보장할 수 없는 경우 버전이 교체되어야 함." />
    </element>
    <element id="DocumentReference.custodian.identifier.type.coding.code">
      <path value="DocumentReference.custodian.identifier.type.coding.code" />
      <short value="시스템에 정의된 구문(syntax)의 기호(symbol)" />
      <definition value="시스템에 정의된 구문의 기호. 기호는 CodeSystem[코드시스템]에 의해 정의된 구문에서 미리 정의된 코드 또는 표현(expression)일 수 있음. (예: post-coordination)" />
    </element>
    <element id="DocumentReference.custodian.identifier.type.coding.display">
      <path value="DocumentReference.custodian.identifier.type.coding.display" />
      <short value="시스템에 정의된 표현" />
      <definition value="시스템 내 코드의 의미를 시스템의 규칙에 따라 표현한 것을 의미함." />
    </element>
    <element id="DocumentReference.custodian.identifier.type.coding.userSelected">
      <path value="DocumentReference.custodian.identifier.type.coding.userSelected" />
      <short value="해당 코딩 방법이 사용자에 의해 직접 선택되었는지 여부" />
      <definition value="해당 코딩 방법이 사용자에 의해 직접 선택되었음을 나타냄. 즉, 선택 가능한 항목 (코드 혹은 디스플레이) 목록에 존재하지 않음을 나타냄." />
    </element>
    <element id="DocumentReference.custodian.identifier.type.text">
      <path value="DocumentReference.custodian.identifier.type.text" />
      <short value="개념에 대한 일반 텍스트 묘사" />
      <definition value="데이터를 입력한 사용자의 입장에서 보거나/선택하거나/언급한대로의 개념, 혹은 사용자가 의도한 의미를 사람이 사용하는 언어로 표현한 것임." />
    </element>
    <element id="DocumentReference.custodian.identifier.system">
      <path value="DocumentReference.custodian.identifier.system" />
      <short value="식별자 값의 네임스페이스(namespace)" />
      <definition value="설정값에 대한 네임 스페이스 (namespace), 즉 고유한 설정값을 설명하는 URL을 설정함." />
    </element>
    <element id="DocumentReference.custodian.identifier.value">
      <path value="DocumentReference.custodian.identifier.value" />
      <short value="고유 설정값" />
      <definition value="일반적으로 식별자의 사용과와 관련이 있으며, 시스템 컨텍스트 (context) 내에서 고유한 식별자의 일부분임." />
    </element>
    <element id="DocumentReference.custodian.identifier.period">
      <path value="DocumentReference.custodian.identifier.period" />
      <short value="식별자의 유효 기간" />
      <definition value="식별자가 사용 가능했거나 가능한 기간을 나타냄." />
    </element>
    <element id="DocumentReference.custodian.identifier.period.start">
      <path value="DocumentReference.custodian.identifier.period.start" />
      <short value="해당 유효 기간의 시작 시점 (설정된 날짜 포함)" />
      <definition value="해당 유효 기간이 시작되는 시점을 나타냄. 유효 기간은 시작 시점으로 설정된 날짜를 포함함." />
    </element>
    <element id="DocumentReference.custodian.identifier.period.end">
      <path value="DocumentReference.custodian.identifier.period.end" />
      <short value="해당 유효 기간의 종료 시점 (설정된 날짜 포함)" />
      <definition value="기간의 종료. 기간의 종료가 누락된 경우, 인스턴스가 생성될 때 끝이 알려지거나 계획되지 않았음을 의미함. 시작일은 과거일 수 있고 종료일은 미래일 수 있음. 이는 해당 기간이 해당 시간에 종료될 예정임을 의미함" />
    </element>
    <element id="DocumentReference.custodian.identifier.assigner">
      <path value="DocumentReference.custodian.identifier.assigner" />
      <short value="식별자를 발급한 조직 (단순 텍스트 기입 가능)" />
      <definition value="식별자를 발급하고 관리하는 조직을 나타냄." />
    </element>
    <element id="DocumentReference.custodian.display">
      <path value="DocumentReference.custodian.display" />
      <short value="해당 리소스를 대체하는 텍스트 설명" />
      <definition value="리소스 참조 외에도 리소스를 식별하기 위한 일반 텍스트 설명임." />
    </element>
    <element id="DocumentReference.relatesTo">
      <path value="DocumentReference.relatesTo" />
      <short value="다른 문서와의 관계" />
      <definition value="해당 문서와 이미 존재하는 다른 DocumentReference[]와의 관계." />
      <comment value="다른 문서에 추가된 문서는 자체적으로 완전하지 않기 때문에 해당 요소는 수정자(modifier)로 레이블됨" />
      <type>
        <code value="BackboneElement" />
      </type>
      <isSummary value="true" />
      <mapping>
        <identity value="fhircomposition" />
        <map value="Composition.relatesTo" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value=".outboundRelationship" />
      </mapping>
      <mapping>
        <identity value="xds" />
        <map value="DocumentEntry Associations" />
      </mapping>
    </element>
    <element id="DocumentReference.relatesTo.code">
      <path value="DocumentReference.relatesTo.code" />
      <short value="replaces | transforms | signs | appends" />
      <definition value="해당 문서와 다른 문서간의 관계 유형" />
      <comment value="해당 문서가 다른 문서를 추가하는 경우, 참조된 문서에 대한 접근 없이 문서를 완전히 이해할 수 없음." />
      <min value="1" />
      <max value="1" />
      <type>
        <code value="code" />
      </type>
      <isSummary value="true" />
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="DocumentRelationshipType" />
        </extension>
        <strength value="required" />
        <description value="The type of relationship between documents." />
        <valueSet value="http://hl7.org/fhir/ValueSet/document-relationship-type|4.0.1" />
      </binding>
      <mapping>
        <identity value="fhircomposition" />
        <map value="Composition.relatesTo.code" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value=".outboundRelationship.typeCode" />
      </mapping>
      <mapping>
        <identity value="xds" />
        <map value="DocumentEntry Associations type" />
      </mapping>
    </element>
    <element id="DocumentReference.relatesTo.target">
      <path value="DocumentReference.relatesTo.target" />
      <short value="해당 관계의 초점" />
      <definition value="해당 관계의 대상(target) 문서" />
      <min value="1" />
      <max value="1" />
      <type>
        <code value="Reference" />
        <targetProfile value="http://hl7.org/fhir/StructureDefinition/DocumentReference" />
      </type>
      <isSummary value="true" />
      <mapping>
        <identity value="fhircomposition" />
        <map value="Composition.relatesTo.target" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value=".target[classCode=&quot;DOC&quot;, moodCode=&quot;EVN&quot;].id" />
      </mapping>
      <mapping>
        <identity value="xds" />
        <map value="DocumentEntry Associations reference" />
      </mapping>
    </element>
    <element id="DocumentReference.relatesTo.target.reference">
      <path value="DocumentReference.relatesTo.target.reference" />
      <short value="문안 참조, 상대적, 내부적 혹은 절대적인 URL" />
      <definition value="다른 리소스(resource)을 찾을 수 있는 위치에 대한 참조를 의미함. 해당 참조는 service base URL에 상대적인 경우 상대 참조, 혹은 해당 리소스를 찾을 수 있는 위치인 절대 URL일 수 있음. 해당 참조는 버전에 따라 다를 수 있음. 해당 참조가 FHIR RESTful 서버가 아닌 경우, 버전에 따라 다른 것으로 간주함. 내부 구문 참조('#'으로 시작)는 포함되어 있는 리소스를 참조함." />
    </element>
    <element id="DocumentReference.relatesTo.target.type">
      <path value="DocumentReference.relatesTo.target.type" />
      <short value="참조(reference)가 참조하는 유형  (예. &quot;Patient&quot;)" />
      <definition value="참조 대상의 예상 형식임. Reference.type과 Reference.reference가 모두 채워지고 Reference.reference가 FHIR URL이면 두가지 모두 일치해야함. 유형은이 참조가 참조하는 유형 인 리소스 정의의 표준 URL임. 참조는 http://hl7.org/fhir/StructureDefinition/과 관련된 URL임. (예) &quot; 환자 &quot; http://hl7.org/fhir/StructureDefinition/Patient에 대한 참조. 절대 URL은 논리 모델에만 허용됨 (리소스가 아닌 논리 모델의 참조에서만 사용할 수 있음)." />
    </element>
    <element id="DocumentReference.relatesTo.target.identifier">
      <path value="DocumentReference.relatesTo.target.identifier" />
      <short value="문안 참조를 알 수 없는 경우의 논리 참조 (logical reference)" />
      <definition value="대상 리소스의 식별자. 이것은 다른 리소스를 직접 참조할 방법이 없을 때 사용- 해당 앤티티(entity)가 FHIR 서버를 통해 사용할 수 없거나  리소스 작성자가 알려진 식별자를 실제 위치로 변활할 방법이 없기 때문에 이 방법이 사용됨. Reference.identifier가 실제로 FHIR 인스턴스로 노출되는 것을 가르킬(point) 필요는 없지만, FHIR 인스턴스로 노출될 것으로 예상되는 비즈니스 개념을 가리켜야하며, 해당 인스턴스는 참조가 허용되는 FHIR 리소스 유형이여야함." />
    </element>
    <element id="DocumentReference.relatesTo.target.identifier.use">
      <path value="DocumentReference.relatesTo.target.identifier.use" />
      <short value="usual | official | temp | secondary | old (If known)" />
      <definition value="해당 식별자의 목적" />
    </element>
    <element id="DocumentReference.relatesTo.target.identifier.type">
      <path value="DocumentReference.relatesTo.target.identifier.type" />
      <short value="식별자에 대한 설명" />
      <definition value="특정 목적으로 사용되는 식별자를 결정하기 위해 사용하는 식별자의 코드 유형을 나타냄." />
    </element>
    <element id="DocumentReference.relatesTo.target.identifier.type.coding">
      <path value="DocumentReference.relatesTo.target.identifier.type.coding" />
      <short value="전문용어체계(terminology system)에 의해 정의된 코드" />
      <definition value="전문용어체계(terminology system)에 의해 정의된 코드를 참조" />
    </element>
    <element id="DocumentReference.relatesTo.target.identifier.type.coding.system">
      <path value="DocumentReference.relatesTo.target.identifier.type.coding.system" />
      <short value="해당 전문용어체계(terminology system)의 식별" />
      <definition value="코드에서 기호의 의미를 정의하는 CodeSystem[코드시스템]를 식별" />
    </element>
    <element id="DocumentReference.relatesTo.target.identifier.type.coding.version">
      <path value="DocumentReference.relatesTo.target.identifier.type.coding.version" />
      <short value="해당 시스템의 버전 정보 - 필요한 경우" />
      <definition value="해당 코드를 선택한 시점에 사용된 코드 시스템의 버전임. 올바로 관리된 코드 시스템은 코드의 의미가 버전과 관계없이 일관적이므로 버전을 보고할 필요가 없음. 그러나 코드 시스템의 관리 상태는 지속적으로 보장할 수 없는 부분이며, 코드의 의미가 일관적임을 보장할 수 없는 경우 버전이 교체되어야 함." />
    </element>
    <element id="DocumentReference.relatesTo.target.identifier.type.coding.code">
      <path value="DocumentReference.relatesTo.target.identifier.type.coding.code" />
      <short value="시스템에 정의된 구문(syntax)의 기호(symbol)" />
      <definition value="시스템에 정의된 구문의 기호. 기호는 CodeSystem[코드시스템]에 의해 정의된 구문에서 미리 정의된 코드 또는 표현(expression)일 수 있음. (예: post-coordination)" />
    </element>
    <element id="DocumentReference.relatesTo.target.identifier.type.coding.display">
      <path value="DocumentReference.relatesTo.target.identifier.type.coding.display" />
      <short value="시스템에 정의된 표현" />
      <definition value="시스템 내 코드의 의미를 시스템의 규칙에 따라 표현한 것을 의미함." />
    </element>
    <element id="DocumentReference.relatesTo.target.identifier.type.coding.userSelected">
      <path value="DocumentReference.relatesTo.target.identifier.type.coding.userSelected" />
      <short value="해당 코딩 방법이 사용자에 의해 직접 선택되었는지 여부" />
      <definition value="해당 코딩 방법이 사용자에 의해 직접 선택되었음을 나타냄. 즉, 선택 가능한 항목 (코드 혹은 디스플레이) 목록에 존재하지 않음을 나타냄." />
    </element>
    <element id="DocumentReference.relatesTo.target.identifier.type.text">
      <path value="DocumentReference.relatesTo.target.identifier.type.text" />
      <short value="개념에 대한 일반 텍스트 묘사" />
      <definition value="데이터를 입력한 사용자의 입장에서 보거나/선택하거나/언급한대로의 개념, 혹은 사용자가 의도한 의미를 사람이 사용하는 언어로 표현한 것임." />
    </element>
    <element id="DocumentReference.relatesTo.target.identifier.system">
      <path value="DocumentReference.relatesTo.target.identifier.system" />
      <short value="식별자 값의 네임스페이스(namespace)" />
      <definition value="설정값에 대한 네임 스페이스 (namespace), 즉 고유한 설정값을 설명하는 URL을 설정함." />
    </element>
    <element id="DocumentReference.relatesTo.target.identifier.value">
      <path value="DocumentReference.relatesTo.target.identifier.value" />
      <short value="고유 설정값" />
      <definition value="일반적으로 식별자의 사용과와 관련이 있으며, 시스템 컨텍스트 (context) 내에서 고유한 식별자의 일부분임." />
    </element>
    <element id="DocumentReference.relatesTo.target.identifier.period">
      <path value="DocumentReference.relatesTo.target.identifier.period" />
      <short value="식별자의 유효 기간" />
      <definition value="식별자가 사용 가능했거나 가능한 기간을 나타냄." />
    </element>
    <element id="DocumentReference.relatesTo.target.identifier.period.start">
      <path value="DocumentReference.relatesTo.target.identifier.period.start" />
      <short value="해당 유효 기간의 시작 시점 (설정된 날짜 포함)" />
      <definition value="해당 유효 기간이 시작되는 시점을 나타냄. 유효 기간은 시작 시점으로 설정된 날짜를 포함함." />
    </element>
    <element id="DocumentReference.relatesTo.target.identifier.period.end">
      <path value="DocumentReference.relatesTo.target.identifier.period.end" />
      <short value="해당 유효 기간의 종료 시점 (설정된 날짜 포함)" />
      <definition value="기간의 종료. 기간의 종료가 누락된 경우, 인스턴스가 생성될 때 끝이 알려지거나 계획되지 않았음을 의미함. 시작일은 과거일 수 있고 종료일은 미래일 수 있음. 이는 해당 기간이 해당 시간에 종료될 예정임을 의미함" />
    </element>
    <element id="DocumentReference.relatesTo.target.identifier.assigner">
      <path value="DocumentReference.relatesTo.target.identifier.assigner" />
      <short value="식별자를 발급한 조직 (단순 텍스트 기입 가능)" />
      <definition value="식별자를 발급하고 관리하는 조직을 나타냄." />
    </element>
    <element id="DocumentReference.relatesTo.target.display">
      <path value="DocumentReference.relatesTo.target.display" />
      <short value="해당 리소스를 대체하는 텍스트 설명" />
      <definition value="리소스 참조 외에도 리소스를 식별하기 위한 일반 텍스트 설명임." />
    </element>
    <element id="DocumentReference.description">
      <path value="DocumentReference.description" />
      <short value="사람이 읽을 수 있는 설명" />
      <definition value="소스 문서에 대한 사람이 읽을 수 있는 설명" />
      <comment value="문서 내용, 문서의 간결한 요약." />
      <requirements value="Helps humans to assess whether the document is of interest." />
      <max value="1" />
      <type>
        <code value="string" />
      </type>
      <isSummary value="true" />
      <mapping>
        <identity value="v2" />
        <map value="TXA-25" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value=".outboundRelationship[typeCode=&quot;SUBJ&quot;].target.text" />
      </mapping>
      <mapping>
        <identity value="xds" />
        <map value="DocumentEntry.comments" />
      </mapping>
    </element>
    <element id="DocumentReference.securityLabel">
      <path value="DocumentReference.securityLabel" />
      <short value="문서 보안 태그(tag)" />
      <definition value="문서의 개인 정보/보안 수준을 지정하는 보안 태그(Security-Tag ) 코드 세트. DocumentReference.meta.security에는 문서에 대한 &quot;참조&quot;의 보안 라벨이 포함되어 있음. 보안 라벨의 DocumentReference.securityLabel 에는 보안 라벨의 스냅샷이 들어 있음." />
      <comment value="기밀 코드는 여러 개의 어휘 항목을 포함할 수 있음. HL7은 HL7 의료 개인 정보 보호 및 보안 분류 시스템 (HCS)라는 문서 공유 환경에서 바람직한 보안 및 개인 정보 태그에 대한 이해를 발전시킴. 어휘 바인딩은 관리 도메인 책임이므로 다음 사양이 권장되지만 필수는 아님. 해당 방법의 사용은 XDS 선호도 도메인 (Affinity Domain) 또는 발신자와 수신자를 포함한 모든 당사자가 적절하게 태그를 지정하고 시행하도록 신뢰되는 기타 신뢰 도메인(Trust Domain)과 같은 정책 도메인에 달려 있음. HL7은 HL7 의료 개인 정보 보호 및 보안 분류 시스템 (HCS)에는 기밀성, 민감성, 무결성 및 취급 주의사항과 관련된 CodeSystem[]이 있음. 일부 값은 워크플로 (workflow)역할 및 특수 프로젝트와 관련된 로컬 어휘에서 파생 됨." />
      <requirements value="Use of the Health Care Privacy/Security Classification (HCS) system of security-tag use is recommended." />
      <type>
        <code value="CodeableConcept" />
      </type>
      <isSummary value="true" />
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="SecurityLabels" />
        </extension>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-isCommonBinding">
          <valueBoolean value="true" />
        </extension>
        <strength value="extensible" />
        <description value="Security Labels from the Healthcare Privacy and Security Classification System." />
        <valueSet value="http://hl7.org/fhir/ValueSet/security-labels" />
      </binding>
      <mapping>
        <identity value="fhircomposition" />
        <map value="Composition.confidentiality, Composition.meta.security" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="TXA-18" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value=".confidentialityCode" />
      </mapping>
      <mapping>
        <identity value="xds" />
        <map value="DocumentEntry.confidentialityCode" />
      </mapping>
      <mapping>
        <identity value="cda" />
        <map value="ClinicalDocument/confidentialityCode/@code" />
      </mapping>
    </element>
    <element id="DocumentReference.securityLabel.coding">
      <path value="DocumentReference.securityLabel.coding" />
      <short value="전문용어체계(terminology system)에 의해 정의된 코드" />
      <definition value="전문용어체계(terminology system)에 의해 정의된 코드를 참조" />
    </element>
    <element id="DocumentReference.securityLabel.coding.system">
      <path value="DocumentReference.securityLabel.coding.system" />
      <short value="해당 전문용어체계(terminology system)의 식별" />
      <definition value="코드에서 기호의 의미를 정의하는 CodeSystem[코드시스템]를 식별" />
    </element>
    <element id="DocumentReference.securityLabel.coding.version">
      <path value="DocumentReference.securityLabel.coding.version" />
      <short value="해당 시스템의 버전 정보 - 필요한 경우" />
      <definition value="해당 코드를 선택한 시점에 사용된 코드 시스템의 버전임. 올바로 관리된 코드 시스템은 코드의 의미가 버전과 관계없이 일관적이므로 버전을 보고할 필요가 없음. 그러나 코드 시스템의 관리 상태는 지속적으로 보장할 수 없는 부분이며, 코드의 의미가 일관적임을 보장할 수 없는 경우 버전이 교체되어야 함." />
    </element>
    <element id="DocumentReference.securityLabel.coding.code">
      <path value="DocumentReference.securityLabel.coding.code" />
      <short value="시스템에 정의된 구문(syntax)의 기호(symbol)" />
      <definition value="시스템에 정의된 구문의 기호. 기호는 CodeSystem[코드시스템]에 의해 정의된 구문에서 미리 정의된 코드 또는 표현(expression)일 수 있음. (예: post-coordination)" />
    </element>
    <element id="DocumentReference.securityLabel.coding.display">
      <path value="DocumentReference.securityLabel.coding.display" />
      <short value="시스템에 정의된 표현" />
      <definition value="시스템 내 코드의 의미를 시스템의 규칙에 따라 표현한 것을 의미함." />
    </element>
    <element id="DocumentReference.securityLabel.coding.userSelected">
      <path value="DocumentReference.securityLabel.coding.userSelected" />
      <short value="해당 코딩 방법이 사용자에 의해 직접 선택되었는지 여부" />
      <definition value="해당 코딩 방법이 사용자에 의해 직접 선택되었음을 나타냄. 즉, 선택 가능한 항목 (코드 혹은 디스플레이) 목록에 존재하지 않음을 나타냄." />
    </element>
    <element id="DocumentReference.securityLabel.text">
      <path value="DocumentReference.securityLabel.text" />
      <short value="개념에 대한 일반 텍스트 묘사" />
      <definition value="데이터를 입력한 사용자의 입장에서 보거나/선택하거나/언급한대로의 개념, 혹은 사용자가 의도한 의미를 사람이 사용하는 언어로 표현한 것임." />
    </element>
    <element id="DocumentReference.content">
      <path value="DocumentReference.content" />
      <short value="참조된 문서" />
      <definition value="참조된 문서 및 형식. 각각 다른 형식의 여러 컨텐츠(content) 요소 반복이 있을 수 있음." />
      <min value="1" />
      <type>
        <code value="BackboneElement" />
      </type>
      <isSummary value="true" />
      <mapping>
        <identity value="fhircomposition" />
        <map value="Bundle(Composition+*)" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="document.text" />
      </mapping>
    </element>
    <element id="DocumentReference.content.attachment">
      <path value="DocumentReference.content.attachment" />
      <short value="문서에 액세스할 위치" />
      <definition value="컨텐츠(content)의 무결성을 입증하기 위한 중요한 메타데이터(metadata)와 함께 있는 문서의 URL 또는 문서." />
      <min value="1" />
      <max value="1" />
      <type>
        <code value="Attachment" />
      </type>
      <isSummary value="true" />
      <mapping>
        <identity value="fhircomposition" />
        <map value="Composition.language, &#xA;Composition.title, &#xA;Composition.date" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="TXA-3 for mime type" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="document.text" />
      </mapping>
      <mapping>
        <identity value="xds" />
        <map value="DocumentEntry.mimeType, DocumentEntry.languageCode, DocumentEntry.URI, DocumentEntry.size, DocumentEntry.hash, DocumentEntry.title, DocumentEntry.creationTime" />
      </mapping>
      <mapping>
        <identity value="cda" />
        <map value="ClinicalDocument/languageCode, ClinicalDocument/title, ClinicalDocument/date" />
      </mapping>
    </element>
    <element id="DocumentReference.content.attachment.contentType">
      <path value="DocumentReference.content.attachment.contentType" />
      <short value="콘텐츠의 마임(Mime) 유형 (charset 등 포함)" />
      <definition value="첨부파일에서 데이터 유형을 식별하고 데이터를 해석하거나 렌더링(render) 하는 방법을 식별함. charset과 같은 마임(mime) 유형의 매개 변수를 포함함." />
    </element>
    <element id="DocumentReference.content.attachment.language">
      <path value="DocumentReference.content.attachment.language" />
      <short value="내용(content)의 인간 언어 (BCP-47)" />
      <definition value="내용을 표기한 언어의 종류. BCP 47에 의거한 값." />
    </element>
    <element id="DocumentReference.content.attachment.data">
      <path value="DocumentReference.content.attachment.data" />
      <short value="데이터 인라인(inline) - base64ed" />
      <definition value="첨부 파일의 실제 데이터 - 바이트 시퀀스(sequence of bytes). XML에서는 base64로 표현됨." />
    </element>
    <element id="DocumentReference.content.attachment.url">
      <path value="DocumentReference.content.attachment.url" />
      <short value="데이터를 찾을 수 있는 URI" />
      <definition value="데이터에 액세스할 수 있는 위치" />
    </element>
    <element id="DocumentReference.content.attachment.size">
      <path value="DocumentReference.content.attachment.size" />
      <short value="콘텐츠의 바이트 수 (URL이 제공된 경우)" />
      <definition value="해당 첨부파일을 구성하는 데이터 바이트 수임. (base64 인코딩 하기전의 바이트수)" />
    </element>
    <element id="DocumentReference.content.attachment.hash">
      <path value="DocumentReference.content.attachment.hash" />
      <short value="데이터 해시 (sha-1, base64ed)" />
      <definition value="SHA-1을 사용하여 계산된 데이터 해시를 나타냄. base64를 사용하여 표현함." />
    </element>
    <element id="DocumentReference.content.attachment.title">
      <path value="DocumentReference.content.attachment.title" />
      <short value="데이터를 대신하여 표현할 레이블 (label)" />
      <definition value="데이터를 대신하여 표현할 레이블 (label) 혹은 텍스트임." />
    </element>
    <element id="DocumentReference.content.attachment.creation">
      <path value="DocumentReference.content.attachment.creation" />
      <short value="파일이 처음 생성된 날짜" />
      <definition value="첨부 파일이 처음 생성된 날짜임." />
    </element>
    <element id="DocumentReference.content.format">
      <path value="DocumentReference.content.format" />
      <short value="문서의 포멧/컨텐츠(Format/content) 규칙" />
      <definition value="문서 인코딩, 구조, 템플릿의 식별자. 문서는mimeType에 표시된 기본 형식을 따름." />
      <comment value="참조-IHE는 대부분 형식 유형에 URN을 발행하지만 모든 문서를 URI로 식별할 수 있는 것은 아님." />
      <max value="1" />
      <type>
        <code value="Coding" />
      </type>
      <isSummary value="true" />
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="DocumentFormat" />
        </extension>
        <strength value="preferred" />
        <description value="Document Format Codes." />
        <valueSet value="http://hl7.org/fhir/ValueSet/formatcodes" />
      </binding>
      <mapping>
        <identity value="fhircomposition" />
        <map value="Composition.meta.profile" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="document.text" />
      </mapping>
      <mapping>
        <identity value="xds" />
        <map value="DocumentEntry.formatCode" />
      </mapping>
      <mapping>
        <identity value="cda" />
        <map value="derived from the IHE Profile or Implementation Guide templateID" />
      </mapping>
    </element>
    <element id="DocumentReference.content.format.system">
      <path value="DocumentReference.content.format.system" />
      <short value="해당 전문용어체계(terminology system)의 식별" />
      <definition value="코드에서 기호의 의미를 정의하는 CodeSystem[코드시스템]를 식별" />
    </element>
    <element id="DocumentReference.content.format.version">
      <path value="DocumentReference.content.format.version" />
      <short value="해당 시스템의 버전 정보 - 필요한 경우" />
      <definition value="해당 코드를 선택한 시점에 사용된 코드 시스템의 버전임. 올바로 관리된 코드 시스템은 코드의 의미가 버전과 관계없이 일관적이므로 버전을 보고할 필요가 없음. 그러나 코드 시스템의 관리 상태는 지속적으로 보장할 수 없는 부분이며, 코드의 의미가 일관적임을 보장할 수 없는 경우 버전이 교체되어야 함." />
    </element>
    <element id="DocumentReference.content.format.code">
      <path value="DocumentReference.content.format.code" />
      <short value="시스템에 정의된 구문(syntax)의 기호(symbol)" />
      <definition value="시스템에 정의된 구문의 기호. 기호는 CodeSystem[코드시스템]에 의해 정의된 구문에서 미리 정의된 코드 또는 표현(expression)일 수 있음. (예: post-coordination)" />
    </element>
    <element id="DocumentReference.content.format.display">
      <path value="DocumentReference.content.format.display" />
      <short value="시스템에 정의된 표현" />
      <definition value="시스템 내 코드의 의미를 시스템의 규칙에 따라 표현한 것을 의미함." />
    </element>
    <element id="DocumentReference.content.format.userSelected">
      <path value="DocumentReference.content.format.userSelected" />
      <short value="해당 코딩 방법이 사용자에 의해 직접 선택되었는지 여부" />
      <definition value="해당 코딩 방법이 사용자에 의해 직접 선택되었음을 나타냄. 즉, 선택 가능한 항목 (코드 혹은 디스플레이) 목록에 존재하지 않음을 나타냄." />
    </element>
    <element id="DocumentReference.context">
      <path value="DocumentReference.context" />
      <short value="문서의 임상 컨텐츠(content)" />
      <definition value="문서가 작성된 임상 컨텐츠(content)" />
      <comment value="이러한 값들은 주로 관심있거나 관련된 문서를 검색하는 데 도움이 되도록 기본적으로 추가 됨." />
      <max value="1" />
      <type>
        <code value="BackboneElement" />
      </type>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="outboundRelationship[typeCode=&quot;SUBJ&quot;].target[classCode&lt;'ACT']" />
      </mapping>
    </element>
    <element id="DocumentReference.context.encounter">
      <path value="DocumentReference.context.encounter" />
      <short value="문서 컨텐츠(content)의 컨텍스트(context)" />
      <definition value="문서 컨텐츠(content)와 관련된 임상적 Encounter[] 또는 치료 유형을 설명함." />
      <type>
        <code value="Reference" />
        <targetProfile value="http://hl7.org/fhir/StructureDefinition/Encounter" />
        <targetProfile value="http://hl7.org/fhir/StructureDefinition/EpisodeOfCare" />
      </type>
      <mapping>
        <identity value="workflow" />
        <map value="Event.context" />
      </mapping>
      <mapping>
        <identity value="w5" />
        <map value="FiveWs.context" />
      </mapping>
      <mapping>
        <identity value="fhircomposition" />
        <map value="Composition.encounter" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="unique(highest(./outboundRelationship[typeCode=&quot;SUBJ&quot; and isNormalActRelationship()], priorityNumber)/target[moodCode=&quot;EVN&quot; and classCode=(&quot;ENC&quot;, &quot;PCPR&quot;) and isNormalAct])" />
      </mapping>
    </element>
    <element id="DocumentReference.context.encounter.reference">
      <path value="DocumentReference.context.encounter.reference" />
      <short value="문안 참조, 상대적, 내부적 혹은 절대적인 URL" />
      <definition value="다른 리소스(resource)을 찾을 수 있는 위치에 대한 참조를 의미함. 해당 참조는 service base URL에 상대적인 경우 상대 참조, 혹은 해당 리소스를 찾을 수 있는 위치인 절대 URL일 수 있음. 해당 참조는 버전에 따라 다를 수 있음. 해당 참조가 FHIR RESTful 서버가 아닌 경우, 버전에 따라 다른 것으로 간주함. 내부 구문 참조('#'으로 시작)는 포함되어 있는 리소스를 참조함." />
    </element>
    <element id="DocumentReference.context.encounter.type">
      <path value="DocumentReference.context.encounter.type" />
      <short value="참조(reference)가 참조하는 유형  (예. &quot;Patient&quot;)" />
      <definition value="참조 대상의 예상 형식임. Reference.type과 Reference.reference가 모두 채워지고 Reference.reference가 FHIR URL이면 두가지 모두 일치해야함. 유형은이 참조가 참조하는 유형 인 리소스 정의의 표준 URL임. 참조는 http://hl7.org/fhir/StructureDefinition/과 관련된 URL임. (예) &quot; 환자 &quot; http://hl7.org/fhir/StructureDefinition/Patient에 대한 참조. 절대 URL은 논리 모델에만 허용됨 (리소스가 아닌 논리 모델의 참조에서만 사용할 수 있음)." />
    </element>
    <element id="DocumentReference.context.encounter.identifier">
      <path value="DocumentReference.context.encounter.identifier" />
      <short value="문안 참조를 알 수 없는 경우의 논리 참조 (logical reference)" />
      <definition value="대상 리소스의 식별자. 이것은 다른 리소스를 직접 참조할 방법이 없을 때 사용- 해당 앤티티(entity)가 FHIR 서버를 통해 사용할 수 없거나  리소스 작성자가 알려진 식별자를 실제 위치로 변활할 방법이 없기 때문에 이 방법이 사용됨. Reference.identifier가 실제로 FHIR 인스턴스로 노출되는 것을 가르킬(point) 필요는 없지만, FHIR 인스턴스로 노출될 것으로 예상되는 비즈니스 개념을 가리켜야하며, 해당 인스턴스는 참조가 허용되는 FHIR 리소스 유형이여야함." />
    </element>
    <element id="DocumentReference.context.encounter.identifier.use">
      <path value="DocumentReference.context.encounter.identifier.use" />
      <short value="usual | official | temp | secondary | old (If known)" />
      <definition value="해당 식별자의 목적" />
    </element>
    <element id="DocumentReference.context.encounter.identifier.type">
      <path value="DocumentReference.context.encounter.identifier.type" />
      <short value="식별자에 대한 설명" />
      <definition value="특정 목적으로 사용되는 식별자를 결정하기 위해 사용하는 식별자의 코드 유형을 나타냄." />
    </element>
    <element id="DocumentReference.context.encounter.identifier.type.coding">
      <path value="DocumentReference.context.encounter.identifier.type.coding" />
      <short value="전문용어체계(terminology system)에 의해 정의된 코드" />
      <definition value="전문용어체계(terminology system)에 의해 정의된 코드를 참조" />
    </element>
    <element id="DocumentReference.context.encounter.identifier.type.coding.system">
      <path value="DocumentReference.context.encounter.identifier.type.coding.system" />
      <short value="해당 전문용어체계(terminology system)의 식별" />
      <definition value="코드에서 기호의 의미를 정의하는 CodeSystem[코드시스템]를 식별" />
    </element>
    <element id="DocumentReference.context.encounter.identifier.type.coding.version">
      <path value="DocumentReference.context.encounter.identifier.type.coding.version" />
      <short value="해당 시스템의 버전 정보 - 필요한 경우" />
      <definition value="해당 코드를 선택한 시점에 사용된 코드 시스템의 버전임. 올바로 관리된 코드 시스템은 코드의 의미가 버전과 관계없이 일관적이므로 버전을 보고할 필요가 없음. 그러나 코드 시스템의 관리 상태는 지속적으로 보장할 수 없는 부분이며, 코드의 의미가 일관적임을 보장할 수 없는 경우 버전이 교체되어야 함." />
    </element>
    <element id="DocumentReference.context.encounter.identifier.type.coding.code">
      <path value="DocumentReference.context.encounter.identifier.type.coding.code" />
      <short value="시스템에 정의된 구문(syntax)의 기호(symbol)" />
      <definition value="시스템에 정의된 구문의 기호. 기호는 CodeSystem[코드시스템]에 의해 정의된 구문에서 미리 정의된 코드 또는 표현(expression)일 수 있음. (예: post-coordination)" />
    </element>
    <element id="DocumentReference.context.encounter.identifier.type.coding.display">
      <path value="DocumentReference.context.encounter.identifier.type.coding.display" />
      <short value="시스템에 정의된 표현" />
      <definition value="시스템 내 코드의 의미를 시스템의 규칙에 따라 표현한 것을 의미함." />
    </element>
    <element id="DocumentReference.context.encounter.identifier.type.coding.userSelected">
      <path value="DocumentReference.context.encounter.identifier.type.coding.userSelected" />
      <short value="해당 코딩 방법이 사용자에 의해 직접 선택되었는지 여부" />
      <definition value="해당 코딩 방법이 사용자에 의해 직접 선택되었음을 나타냄. 즉, 선택 가능한 항목 (코드 혹은 디스플레이) 목록에 존재하지 않음을 나타냄." />
    </element>
    <element id="DocumentReference.context.encounter.identifier.type.text">
      <path value="DocumentReference.context.encounter.identifier.type.text" />
      <short value="개념에 대한 일반 텍스트 묘사" />
      <definition value="데이터를 입력한 사용자의 입장에서 보거나/선택하거나/언급한대로의 개념, 혹은 사용자가 의도한 의미를 사람이 사용하는 언어로 표현한 것임." />
    </element>
    <element id="DocumentReference.context.encounter.identifier.system">
      <path value="DocumentReference.context.encounter.identifier.system" />
      <short value="식별자 값의 네임스페이스(namespace)" />
      <definition value="설정값에 대한 네임 스페이스 (namespace), 즉 고유한 설정값을 설명하는 URL을 설정함." />
    </element>
    <element id="DocumentReference.context.encounter.identifier.value">
      <path value="DocumentReference.context.encounter.identifier.value" />
      <short value="고유 설정값" />
      <definition value="일반적으로 식별자의 사용과와 관련이 있으며, 시스템 컨텍스트 (context) 내에서 고유한 식별자의 일부분임." />
    </element>
    <element id="DocumentReference.context.encounter.identifier.period">
      <path value="DocumentReference.context.encounter.identifier.period" />
      <short value="식별자의 유효 기간" />
      <definition value="식별자가 사용 가능했거나 가능한 기간을 나타냄." />
    </element>
    <element id="DocumentReference.context.encounter.identifier.period.start">
      <path value="DocumentReference.context.encounter.identifier.period.start" />
      <short value="해당 유효 기간의 시작 시점 (설정된 날짜 포함)" />
      <definition value="해당 유효 기간이 시작되는 시점을 나타냄. 유효 기간은 시작 시점으로 설정된 날짜를 포함함." />
    </element>
    <element id="DocumentReference.context.encounter.identifier.period.end">
      <path value="DocumentReference.context.encounter.identifier.period.end" />
      <short value="해당 유효 기간의 종료 시점 (설정된 날짜 포함)" />
      <definition value="기간의 종료. 기간의 종료가 누락된 경우, 인스턴스가 생성될 때 끝이 알려지거나 계획되지 않았음을 의미함. 시작일은 과거일 수 있고 종료일은 미래일 수 있음. 이는 해당 기간이 해당 시간에 종료될 예정임을 의미함" />
    </element>
    <element id="DocumentReference.context.encounter.identifier.assigner">
      <path value="DocumentReference.context.encounter.identifier.assigner" />
      <short value="식별자를 발급한 조직 (단순 텍스트 기입 가능)" />
      <definition value="식별자를 발급하고 관리하는 조직을 나타냄." />
    </element>
    <element id="DocumentReference.context.encounter.display">
      <path value="DocumentReference.context.encounter.display" />
      <short value="해당 리소스를 대체하는 텍스트 설명" />
      <definition value="리소스 참조 외에도 리소스를 식별하기 위한 일반 텍스트 설명임." />
    </element>
    <element id="DocumentReference.context.event">
      <path value="DocumentReference.context.event" />
      <short value="문서화 된 주요 임상 활동" />
      <definition value="해당 코드 목록은 대장 내시경 또는 충수 절제술과 같은 문서화 되는 주요 임상 활동을 나타냄. 경우에 따라 이벤트는 &quot;History and Physical Report&quot;와 같이 코드 유형에 내재되어 있으며, 이 경우 기록되는 절차는 반드시 &quot;History and Physical&quot; act(행위)임." />
      <comment value="이벤트는 단순히 &quot; 절차보고서 &quot; 이고 절차가 &quot; 대장내시경&quot;인 경우와 같이 유형에 내재된 행위를 더욱 전문화할 수 있음. 하나 이상의 이벤트 코드가 포함된 경우, 클래스 또는 유형 요소에 내재된 값과 충돌하지 않아야 하며, 이러한 충돌은 애매한 상황을 발생시킬 수 있음." />
      <type>
        <code value="CodeableConcept" />
      </type>
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="DocumentEventType" />
        </extension>
        <strength value="example" />
        <description value="This list of codes represents the main clinical acts being documented." />
        <valueSet value="http://terminology.hl7.org/ValueSet/v3-ActCode" />
      </binding>
      <mapping>
        <identity value="fhircomposition" />
        <map value="Composition.event.code" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value=".code" />
      </mapping>
      <mapping>
        <identity value="xds" />
        <map value="DocumentEntry.eventCodeList" />
      </mapping>
    </element>
    <element id="DocumentReference.context.event.coding">
      <path value="DocumentReference.context.event.coding" />
      <short value="전문용어체계(terminology system)에 의해 정의된 코드" />
      <definition value="전문용어체계(terminology system)에 의해 정의된 코드를 참조" />
    </element>
    <element id="DocumentReference.context.event.coding.system">
      <path value="DocumentReference.context.event.coding.system" />
      <short value="해당 전문용어체계(terminology system)의 식별" />
      <definition value="코드에서 기호의 의미를 정의하는 CodeSystem[코드시스템]를 식별" />
    </element>
    <element id="DocumentReference.context.event.coding.version">
      <path value="DocumentReference.context.event.coding.version" />
      <short value="해당 시스템의 버전 정보 - 필요한 경우" />
      <definition value="해당 코드를 선택한 시점에 사용된 코드 시스템의 버전임. 올바로 관리된 코드 시스템은 코드의 의미가 버전과 관계없이 일관적이므로 버전을 보고할 필요가 없음. 그러나 코드 시스템의 관리 상태는 지속적으로 보장할 수 없는 부분이며, 코드의 의미가 일관적임을 보장할 수 없는 경우 버전이 교체되어야 함." />
    </element>
    <element id="DocumentReference.context.event.coding.code">
      <path value="DocumentReference.context.event.coding.code" />
      <short value="시스템에 정의된 구문(syntax)의 기호(symbol)" />
      <definition value="시스템에 정의된 구문의 기호. 기호는 CodeSystem[코드시스템]에 의해 정의된 구문에서 미리 정의된 코드 또는 표현(expression)일 수 있음. (예: post-coordination)" />
    </element>
    <element id="DocumentReference.context.event.coding.display">
      <path value="DocumentReference.context.event.coding.display" />
      <short value="시스템에 정의된 표현" />
      <definition value="시스템 내 코드의 의미를 시스템의 규칙에 따라 표현한 것을 의미함." />
    </element>
    <element id="DocumentReference.context.event.coding.userSelected">
      <path value="DocumentReference.context.event.coding.userSelected" />
      <short value="해당 코딩 방법이 사용자에 의해 직접 선택되었는지 여부" />
      <definition value="해당 코딩 방법이 사용자에 의해 직접 선택되었음을 나타냄. 즉, 선택 가능한 항목 (코드 혹은 디스플레이) 목록에 존재하지 않음을 나타냄." />
    </element>
    <element id="DocumentReference.context.event.text">
      <path value="DocumentReference.context.event.text" />
      <short value="개념에 대한 일반 텍스트 묘사" />
      <definition value="데이터를 입력한 사용자의 입장에서 보거나/선택하거나/언급한대로의 개념, 혹은 사용자가 의도한 의미를 사람이 사용하는 언어로 표현한 것임." />
    </element>
    <element id="DocumentReference.context.period">
      <path value="DocumentReference.context.period" />
      <short value="문서화 중인 서비스 시간" />
      <definition value="문서에 설명된 서비스가 제공된 기간" />
      <max value="1" />
      <type>
        <code value="Period" />
      </type>
      <isSummary value="true" />
      <mapping>
        <identity value="fhircomposition" />
        <map value="Composition.event.period" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value=".effectiveTime" />
      </mapping>
      <mapping>
        <identity value="xds" />
        <map value="DocumentEntry.serviceStartTime, DocumentEntry.serviceStopTime" />
      </mapping>
      <mapping>
        <identity value="cda" />
        <map value="ClinicalDocument/documentationOf/&#xA;serviceEvent/effectiveTime/low/&#xA;@value --&gt; ClinicalDocument/documentationOf/&#xA;serviceEvent/effectiveTime/high/&#xA;@value" />
      </mapping>
    </element>
    <element id="DocumentReference.context.period.start">
      <path value="DocumentReference.context.period.start" />
      <short value="해당 유효 기간의 시작 시점 (설정된 날짜 포함)" />
      <definition value="해당 유효 기간이 시작되는 시점을 나타냄. 유효 기간은 시작 시점으로 설정된 날짜를 포함함." />
    </element>
    <element id="DocumentReference.context.period.end">
      <path value="DocumentReference.context.period.end" />
      <short value="해당 유효 기간의 종료 시점 (설정된 날짜 포함)" />
      <definition value="기간의 종료. 기간의 종료가 누락된 경우, 인스턴스가 생성될 때 끝이 알려지거나 계획되지 않았음을 의미함. 시작일은 과거일 수 있고 종료일은 미래일 수 있음. 이는 해당 기간이 해당 시간에 종료될 예정임을 의미함" />
    </element>
    <element id="DocumentReference.context.facilityType">
      <path value="DocumentReference.context.facilityType" />
      <short value="환자가 본 시설의 종류" />
      <definition value="환자가 본 시설의 종류" />
      <max value="1" />
      <type>
        <code value="CodeableConcept" />
      </type>
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="DocumentC80FacilityType" />
        </extension>
        <strength value="example" />
        <description value="XDS Facility Type." />
        <valueSet value="http://hl7.org/fhir/ValueSet/c80-facilitycodes" />
      </binding>
      <mapping>
        <identity value="fhircomposition" />
        <map value="usually from a mapping to a local ValueSet" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value=".participation[typeCode=&quot;LOC&quot;].role[classCode=&quot;DSDLOC&quot;].code" />
      </mapping>
      <mapping>
        <identity value="xds" />
        <map value="DocumentEntry.healthcareFacilityTypeCode" />
      </mapping>
      <mapping>
        <identity value="cda" />
        <map value="usually a mapping to a local ValueSet. Must be consistent with /clinicalDocument/code" />
      </mapping>
    </element>
    <element id="DocumentReference.context.facilityType.coding">
      <path value="DocumentReference.context.facilityType.coding" />
      <short value="전문용어체계(terminology system)에 의해 정의된 코드" />
      <definition value="전문용어체계(terminology system)에 의해 정의된 코드를 참조" />
    </element>
    <element id="DocumentReference.context.facilityType.coding.system">
      <path value="DocumentReference.context.facilityType.coding.system" />
      <short value="해당 전문용어체계(terminology system)의 식별" />
      <definition value="코드에서 기호의 의미를 정의하는 CodeSystem[코드시스템]를 식별" />
    </element>
    <element id="DocumentReference.context.facilityType.coding.version">
      <path value="DocumentReference.context.facilityType.coding.version" />
      <short value="해당 시스템의 버전 정보 - 필요한 경우" />
      <definition value="해당 코드를 선택한 시점에 사용된 코드 시스템의 버전임. 올바로 관리된 코드 시스템은 코드의 의미가 버전과 관계없이 일관적이므로 버전을 보고할 필요가 없음. 그러나 코드 시스템의 관리 상태는 지속적으로 보장할 수 없는 부분이며, 코드의 의미가 일관적임을 보장할 수 없는 경우 버전이 교체되어야 함." />
    </element>
    <element id="DocumentReference.context.facilityType.coding.code">
      <path value="DocumentReference.context.facilityType.coding.code" />
      <short value="시스템에 정의된 구문(syntax)의 기호(symbol)" />
      <definition value="시스템에 정의된 구문의 기호. 기호는 CodeSystem[코드시스템]에 의해 정의된 구문에서 미리 정의된 코드 또는 표현(expression)일 수 있음. (예: post-coordination)" />
    </element>
    <element id="DocumentReference.context.facilityType.coding.display">
      <path value="DocumentReference.context.facilityType.coding.display" />
      <short value="시스템에 정의된 표현" />
      <definition value="시스템 내 코드의 의미를 시스템의 규칙에 따라 표현한 것을 의미함." />
    </element>
    <element id="DocumentReference.context.facilityType.coding.userSelected">
      <path value="DocumentReference.context.facilityType.coding.userSelected" />
      <short value="해당 코딩 방법이 사용자에 의해 직접 선택되었는지 여부" />
      <definition value="해당 코딩 방법이 사용자에 의해 직접 선택되었음을 나타냄. 즉, 선택 가능한 항목 (코드 혹은 디스플레이) 목록에 존재하지 않음을 나타냄." />
    </element>
    <element id="DocumentReference.context.facilityType.text">
      <path value="DocumentReference.context.facilityType.text" />
      <short value="개념에 대한 일반 텍스트 묘사" />
      <definition value="데이터를 입력한 사용자의 입장에서 보거나/선택하거나/언급한대로의 개념, 혹은 사용자가 의도한 의미를 사람이 사용하는 언어로 표현한 것임." />
    </element>
    <element id="DocumentReference.context.practiceSetting">
      <path value="DocumentReference.context.practiceSetting" />
      <short value="컨텐츠(content)가 생성 된 위치에 대한 추가 세부 정보 (예 : 임상 전문)" />
      <definition value="해당 속성은 종종 임상 전문성을 반영하여 컨텐츠(content)가 생성 된 진료 환경에 대한 세부 사항을 전달할 수 있음." />
      <comment value="해당 요소는 전문 실무 클래스에 대한 대략적인 분류시스템을 기반으로 해야 함. LOINC의 주제 영역 (Subject Matter Domain)에 설명된 것과 같은 실습 설정(Practice Setting)에 분류시스템을 사용할 것을 권장함." />
      <requirements value="This is an important piece of metadata that providers often rely upon to quickly sort and/or filter out to find specific content." />
      <max value="1" />
      <type>
        <code value="CodeableConcept" />
      </type>
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="DocumentC80PracticeSetting" />
        </extension>
        <strength value="example" />
        <description value="Additional details about where the content was created (e.g. clinical specialty)." />
        <valueSet value="http://hl7.org/fhir/ValueSet/c80-practice-codes" />
      </binding>
      <mapping>
        <identity value="fhircomposition" />
        <map value="usually from a mapping to a local ValueSet" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value=".participation[typeCode=&quot;LOC&quot;].role[classCode=&quot;DSDLOC&quot;].code" />
      </mapping>
      <mapping>
        <identity value="xds" />
        <map value="DocumentEntry.practiceSettingCode" />
      </mapping>
      <mapping>
        <identity value="cda" />
        <map value="usually from a mapping to a local ValueSet" />
      </mapping>
    </element>
    <element id="DocumentReference.context.practiceSetting.coding">
      <path value="DocumentReference.context.practiceSetting.coding" />
      <short value="전문용어체계(terminology system)에 의해 정의된 코드" />
      <definition value="전문용어체계(terminology system)에 의해 정의된 코드를 참조" />
    </element>
    <element id="DocumentReference.context.practiceSetting.coding.system">
      <path value="DocumentReference.context.practiceSetting.coding.system" />
      <short value="해당 전문용어체계(terminology system)의 식별" />
      <definition value="코드에서 기호의 의미를 정의하는 CodeSystem[코드시스템]를 식별" />
    </element>
    <element id="DocumentReference.context.practiceSetting.coding.version">
      <path value="DocumentReference.context.practiceSetting.coding.version" />
      <short value="해당 시스템의 버전 정보 - 필요한 경우" />
      <definition value="해당 코드를 선택한 시점에 사용된 코드 시스템의 버전임. 올바로 관리된 코드 시스템은 코드의 의미가 버전과 관계없이 일관적이므로 버전을 보고할 필요가 없음. 그러나 코드 시스템의 관리 상태는 지속적으로 보장할 수 없는 부분이며, 코드의 의미가 일관적임을 보장할 수 없는 경우 버전이 교체되어야 함." />
    </element>
    <element id="DocumentReference.context.practiceSetting.coding.code">
      <path value="DocumentReference.context.practiceSetting.coding.code" />
      <short value="시스템에 정의된 구문(syntax)의 기호(symbol)" />
      <definition value="시스템에 정의된 구문의 기호. 기호는 CodeSystem[코드시스템]에 의해 정의된 구문에서 미리 정의된 코드 또는 표현(expression)일 수 있음. (예: post-coordination)" />
    </element>
    <element id="DocumentReference.context.practiceSetting.coding.display">
      <path value="DocumentReference.context.practiceSetting.coding.display" />
      <short value="시스템에 정의된 표현" />
      <definition value="시스템 내 코드의 의미를 시스템의 규칙에 따라 표현한 것을 의미함." />
    </element>
    <element id="DocumentReference.context.practiceSetting.coding.userSelected">
      <path value="DocumentReference.context.practiceSetting.coding.userSelected" />
      <short value="해당 코딩 방법이 사용자에 의해 직접 선택되었는지 여부" />
      <definition value="해당 코딩 방법이 사용자에 의해 직접 선택되었음을 나타냄. 즉, 선택 가능한 항목 (코드 혹은 디스플레이) 목록에 존재하지 않음을 나타냄." />
    </element>
    <element id="DocumentReference.context.practiceSetting.text">
      <path value="DocumentReference.context.practiceSetting.text" />
      <short value="개념에 대한 일반 텍스트 묘사" />
      <definition value="데이터를 입력한 사용자의 입장에서 보거나/선택하거나/언급한대로의 개념, 혹은 사용자가 의도한 의미를 사람이 사용하는 언어로 표현한 것임." />
    </element>
    <element id="DocumentReference.context.sourcePatientInfo">
      <path value="DocumentReference.context.sourcePatientInfo" />
      <short value="소스에서의 환자 인구 통계" />
      <definition value="문서가 게시될 때 알려진 환자 정보. 특정 버전 또는 포함된 버전에 대한 참조일 수 있음." />
      <max value="1" />
      <type>
        <code value="Reference" />
        <targetProfile value="http://hl7.org/fhir/StructureDefinition/Patient" />
      </type>
      <mapping>
        <identity value="fhircomposition" />
        <map value="Composition.subject" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value=".participation[typeCode=&quot;SBJ&quot;].role[typeCode=&quot;PAT&quot;]" />
      </mapping>
      <mapping>
        <identity value="xds" />
        <map value="DocumentEntry.sourcePatientInfo, DocumentEntry.sourcePatientId" />
      </mapping>
      <mapping>
        <identity value="cda" />
        <map value="ClinicalDocument/recordTarget/" />
      </mapping>
    </element>
    <element id="DocumentReference.context.sourcePatientInfo.reference">
      <path value="DocumentReference.context.sourcePatientInfo.reference" />
      <short value="문안 참조, 상대적, 내부적 혹은 절대적인 URL" />
      <definition value="다른 리소스(resource)을 찾을 수 있는 위치에 대한 참조를 의미함. 해당 참조는 service base URL에 상대적인 경우 상대 참조, 혹은 해당 리소스를 찾을 수 있는 위치인 절대 URL일 수 있음. 해당 참조는 버전에 따라 다를 수 있음. 해당 참조가 FHIR RESTful 서버가 아닌 경우, 버전에 따라 다른 것으로 간주함. 내부 구문 참조('#'으로 시작)는 포함되어 있는 리소스를 참조함." />
    </element>
    <element id="DocumentReference.context.sourcePatientInfo.type">
      <path value="DocumentReference.context.sourcePatientInfo.type" />
      <short value="참조(reference)가 참조하는 유형  (예. &quot;Patient&quot;)" />
      <definition value="참조 대상의 예상 형식임. Reference.type과 Reference.reference가 모두 채워지고 Reference.reference가 FHIR URL이면 두가지 모두 일치해야함. 유형은이 참조가 참조하는 유형 인 리소스 정의의 표준 URL임. 참조는 http://hl7.org/fhir/StructureDefinition/과 관련된 URL임. (예) &quot; 환자 &quot; http://hl7.org/fhir/StructureDefinition/Patient에 대한 참조. 절대 URL은 논리 모델에만 허용됨 (리소스가 아닌 논리 모델의 참조에서만 사용할 수 있음)." />
    </element>
    <element id="DocumentReference.context.sourcePatientInfo.identifier">
      <path value="DocumentReference.context.sourcePatientInfo.identifier" />
      <short value="문안 참조를 알 수 없는 경우의 논리 참조 (logical reference)" />
      <definition value="대상 리소스의 식별자. 이것은 다른 리소스를 직접 참조할 방법이 없을 때 사용- 해당 앤티티(entity)가 FHIR 서버를 통해 사용할 수 없거나  리소스 작성자가 알려진 식별자를 실제 위치로 변활할 방법이 없기 때문에 이 방법이 사용됨. Reference.identifier가 실제로 FHIR 인스턴스로 노출되는 것을 가르킬(point) 필요는 없지만, FHIR 인스턴스로 노출될 것으로 예상되는 비즈니스 개념을 가리켜야하며, 해당 인스턴스는 참조가 허용되는 FHIR 리소스 유형이여야함." />
    </element>
    <element id="DocumentReference.context.sourcePatientInfo.identifier.use">
      <path value="DocumentReference.context.sourcePatientInfo.identifier.use" />
      <short value="usual | official | temp | secondary | old (If known)" />
      <definition value="해당 식별자의 목적" />
    </element>
    <element id="DocumentReference.context.sourcePatientInfo.identifier.type">
      <path value="DocumentReference.context.sourcePatientInfo.identifier.type" />
      <short value="식별자에 대한 설명" />
      <definition value="특정 목적으로 사용되는 식별자를 결정하기 위해 사용하는 식별자의 코드 유형을 나타냄." />
    </element>
    <element id="DocumentReference.context.sourcePatientInfo.identifier.type.coding">
      <path value="DocumentReference.context.sourcePatientInfo.identifier.type.coding" />
      <short value="전문용어체계(terminology system)에 의해 정의된 코드" />
      <definition value="전문용어체계(terminology system)에 의해 정의된 코드를 참조" />
    </element>
    <element id="DocumentReference.context.sourcePatientInfo.identifier.type.coding.system">
      <path value="DocumentReference.context.sourcePatientInfo.identifier.type.coding.system" />
      <short value="해당 전문용어체계(terminology system)의 식별" />
      <definition value="코드에서 기호의 의미를 정의하는 CodeSystem[코드시스템]를 식별" />
    </element>
    <element id="DocumentReference.context.sourcePatientInfo.identifier.type.coding.version">
      <path value="DocumentReference.context.sourcePatientInfo.identifier.type.coding.version" />
      <short value="해당 시스템의 버전 정보 - 필요한 경우" />
      <definition value="해당 코드를 선택한 시점에 사용된 코드 시스템의 버전임. 올바로 관리된 코드 시스템은 코드의 의미가 버전과 관계없이 일관적이므로 버전을 보고할 필요가 없음. 그러나 코드 시스템의 관리 상태는 지속적으로 보장할 수 없는 부분이며, 코드의 의미가 일관적임을 보장할 수 없는 경우 버전이 교체되어야 함." />
    </element>
    <element id="DocumentReference.context.sourcePatientInfo.identifier.type.coding.code">
      <path value="DocumentReference.context.sourcePatientInfo.identifier.type.coding.code" />
      <short value="시스템에 정의된 구문(syntax)의 기호(symbol)" />
      <definition value="시스템에 정의된 구문의 기호. 기호는 CodeSystem[코드시스템]에 의해 정의된 구문에서 미리 정의된 코드 또는 표현(expression)일 수 있음. (예: post-coordination)" />
    </element>
    <element id="DocumentReference.context.sourcePatientInfo.identifier.type.coding.display">
      <path value="DocumentReference.context.sourcePatientInfo.identifier.type.coding.display" />
      <short value="시스템에 정의된 표현" />
      <definition value="시스템 내 코드의 의미를 시스템의 규칙에 따라 표현한 것을 의미함." />
    </element>
    <element id="DocumentReference.context.sourcePatientInfo.identifier.type.coding.userSelected">
      <path value="DocumentReference.context.sourcePatientInfo.identifier.type.coding.userSelected" />
      <short value="해당 코딩 방법이 사용자에 의해 직접 선택되었는지 여부" />
      <definition value="해당 코딩 방법이 사용자에 의해 직접 선택되었음을 나타냄. 즉, 선택 가능한 항목 (코드 혹은 디스플레이) 목록에 존재하지 않음을 나타냄." />
    </element>
    <element id="DocumentReference.context.sourcePatientInfo.identifier.type.text">
      <path value="DocumentReference.context.sourcePatientInfo.identifier.type.text" />
      <short value="개념에 대한 일반 텍스트 묘사" />
      <definition value="데이터를 입력한 사용자의 입장에서 보거나/선택하거나/언급한대로의 개념, 혹은 사용자가 의도한 의미를 사람이 사용하는 언어로 표현한 것임." />
    </element>
    <element id="DocumentReference.context.sourcePatientInfo.identifier.system">
      <path value="DocumentReference.context.sourcePatientInfo.identifier.system" />
      <short value="식별자 값의 네임스페이스(namespace)" />
      <definition value="설정값에 대한 네임 스페이스 (namespace), 즉 고유한 설정값을 설명하는 URL을 설정함." />
    </element>
    <element id="DocumentReference.context.sourcePatientInfo.identifier.value">
      <path value="DocumentReference.context.sourcePatientInfo.identifier.value" />
      <short value="고유 설정값" />
      <definition value="일반적으로 식별자의 사용과와 관련이 있으며, 시스템 컨텍스트 (context) 내에서 고유한 식별자의 일부분임." />
    </element>
    <element id="DocumentReference.context.sourcePatientInfo.identifier.period">
      <path value="DocumentReference.context.sourcePatientInfo.identifier.period" />
      <short value="식별자의 유효 기간" />
      <definition value="식별자가 사용 가능했거나 가능한 기간을 나타냄." />
    </element>
    <element id="DocumentReference.context.sourcePatientInfo.identifier.period.start">
      <path value="DocumentReference.context.sourcePatientInfo.identifier.period.start" />
      <short value="해당 유효 기간의 시작 시점 (설정된 날짜 포함)" />
      <definition value="해당 유효 기간이 시작되는 시점을 나타냄. 유효 기간은 시작 시점으로 설정된 날짜를 포함함." />
    </element>
    <element id="DocumentReference.context.sourcePatientInfo.identifier.period.end">
      <path value="DocumentReference.context.sourcePatientInfo.identifier.period.end" />
      <short value="해당 유효 기간의 종료 시점 (설정된 날짜 포함)" />
      <definition value="기간의 종료. 기간의 종료가 누락된 경우, 인스턴스가 생성될 때 끝이 알려지거나 계획되지 않았음을 의미함. 시작일은 과거일 수 있고 종료일은 미래일 수 있음. 이는 해당 기간이 해당 시간에 종료될 예정임을 의미함" />
    </element>
    <element id="DocumentReference.context.sourcePatientInfo.identifier.assigner">
      <path value="DocumentReference.context.sourcePatientInfo.identifier.assigner" />
      <short value="식별자를 발급한 조직 (단순 텍스트 기입 가능)" />
      <definition value="식별자를 발급하고 관리하는 조직을 나타냄." />
    </element>
    <element id="DocumentReference.context.sourcePatientInfo.display">
      <path value="DocumentReference.context.sourcePatientInfo.display" />
      <short value="해당 리소스를 대체하는 텍스트 설명" />
      <definition value="리소스 참조 외에도 리소스를 식별하기 위한 일반 텍스트 설명임." />
    </element>
    <element id="DocumentReference.context.related">
      <path value="DocumentReference.context.related" />
      <short value="관련된 식별자 또는 리소스" />
      <definition value="DocumentReference[]와 관련된 식별자 또는 리소스." />
      <comment value="DocumentReference[] 또는 참조된 Document[문서]를 생성한 식별자 또는 리소스 일 수 있음." />
      <type>
        <code value="Reference" />
        <targetProfile value="http://hl7.org/fhir/StructureDefinition/Resource" />
      </type>
      <mapping>
        <identity value="fhircomposition" />
        <map value="Composition.event.detail" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./outboundRelationship[typeCode=&quot;PERT&quot; and isNormalActRelationship()] / target[isNormalAct]" />
      </mapping>
      <mapping>
        <identity value="xds" />
        <map value="DocumentEntry.referenceIdList" />
      </mapping>
      <mapping>
        <identity value="cda" />
        <map value="ClinicalDocument/relatedDocument" />
      </mapping>
    </element>
    <element id="DocumentReference.context.related.reference">
      <path value="DocumentReference.context.related.reference" />
      <short value="문안 참조, 상대적, 내부적 혹은 절대적인 URL" />
      <definition value="다른 리소스(resource)을 찾을 수 있는 위치에 대한 참조를 의미함. 해당 참조는 service base URL에 상대적인 경우 상대 참조, 혹은 해당 리소스를 찾을 수 있는 위치인 절대 URL일 수 있음. 해당 참조는 버전에 따라 다를 수 있음. 해당 참조가 FHIR RESTful 서버가 아닌 경우, 버전에 따라 다른 것으로 간주함. 내부 구문 참조('#'으로 시작)는 포함되어 있는 리소스를 참조함." />
    </element>
    <element id="DocumentReference.context.related.type">
      <path value="DocumentReference.context.related.type" />
      <short value="참조(reference)가 참조하는 유형  (예. &quot;Patient&quot;)" />
      <definition value="참조 대상의 예상 형식임. Reference.type과 Reference.reference가 모두 채워지고 Reference.reference가 FHIR URL이면 두가지 모두 일치해야함. 유형은이 참조가 참조하는 유형 인 리소스 정의의 표준 URL임. 참조는 http://hl7.org/fhir/StructureDefinition/과 관련된 URL임. (예) &quot; 환자 &quot; http://hl7.org/fhir/StructureDefinition/Patient에 대한 참조. 절대 URL은 논리 모델에만 허용됨 (리소스가 아닌 논리 모델의 참조에서만 사용할 수 있음)." />
    </element>
    <element id="DocumentReference.context.related.identifier">
      <path value="DocumentReference.context.related.identifier" />
      <short value="문안 참조를 알 수 없는 경우의 논리 참조 (logical reference)" />
      <definition value="대상 리소스의 식별자. 이것은 다른 리소스를 직접 참조할 방법이 없을 때 사용- 해당 앤티티(entity)가 FHIR 서버를 통해 사용할 수 없거나  리소스 작성자가 알려진 식별자를 실제 위치로 변활할 방법이 없기 때문에 이 방법이 사용됨. Reference.identifier가 실제로 FHIR 인스턴스로 노출되는 것을 가르킬(point) 필요는 없지만, FHIR 인스턴스로 노출될 것으로 예상되는 비즈니스 개념을 가리켜야하며, 해당 인스턴스는 참조가 허용되는 FHIR 리소스 유형이여야함." />
    </element>
    <element id="DocumentReference.context.related.identifier.use">
      <path value="DocumentReference.context.related.identifier.use" />
      <short value="usual | official | temp | secondary | old (If known)" />
      <definition value="해당 식별자의 목적" />
    </element>
    <element id="DocumentReference.context.related.identifier.type">
      <path value="DocumentReference.context.related.identifier.type" />
      <short value="식별자에 대한 설명" />
      <definition value="특정 목적으로 사용되는 식별자를 결정하기 위해 사용하는 식별자의 코드 유형을 나타냄." />
    </element>
    <element id="DocumentReference.context.related.identifier.type.coding">
      <path value="DocumentReference.context.related.identifier.type.coding" />
      <short value="전문용어체계(terminology system)에 의해 정의된 코드" />
      <definition value="전문용어체계(terminology system)에 의해 정의된 코드를 참조" />
    </element>
    <element id="DocumentReference.context.related.identifier.type.coding.system">
      <path value="DocumentReference.context.related.identifier.type.coding.system" />
      <short value="해당 전문용어체계(terminology system)의 식별" />
      <definition value="코드에서 기호의 의미를 정의하는 CodeSystem[코드시스템]를 식별" />
    </element>
    <element id="DocumentReference.context.related.identifier.type.coding.version">
      <path value="DocumentReference.context.related.identifier.type.coding.version" />
      <short value="해당 시스템의 버전 정보 - 필요한 경우" />
      <definition value="해당 코드를 선택한 시점에 사용된 코드 시스템의 버전임. 올바로 관리된 코드 시스템은 코드의 의미가 버전과 관계없이 일관적이므로 버전을 보고할 필요가 없음. 그러나 코드 시스템의 관리 상태는 지속적으로 보장할 수 없는 부분이며, 코드의 의미가 일관적임을 보장할 수 없는 경우 버전이 교체되어야 함." />
    </element>
    <element id="DocumentReference.context.related.identifier.type.coding.code">
      <path value="DocumentReference.context.related.identifier.type.coding.code" />
      <short value="시스템에 정의된 구문(syntax)의 기호(symbol)" />
      <definition value="시스템에 정의된 구문의 기호. 기호는 CodeSystem[코드시스템]에 의해 정의된 구문에서 미리 정의된 코드 또는 표현(expression)일 수 있음. (예: post-coordination)" />
    </element>
    <element id="DocumentReference.context.related.identifier.type.coding.display">
      <path value="DocumentReference.context.related.identifier.type.coding.display" />
      <short value="시스템에 정의된 표현" />
      <definition value="시스템 내 코드의 의미를 시스템의 규칙에 따라 표현한 것을 의미함." />
    </element>
    <element id="DocumentReference.context.related.identifier.type.coding.userSelected">
      <path value="DocumentReference.context.related.identifier.type.coding.userSelected" />
      <short value="해당 코딩 방법이 사용자에 의해 직접 선택되었는지 여부" />
      <definition value="해당 코딩 방법이 사용자에 의해 직접 선택되었음을 나타냄. 즉, 선택 가능한 항목 (코드 혹은 디스플레이) 목록에 존재하지 않음을 나타냄." />
    </element>
    <element id="DocumentReference.context.related.identifier.type.text">
      <path value="DocumentReference.context.related.identifier.type.text" />
      <short value="개념에 대한 일반 텍스트 묘사" />
      <definition value="데이터를 입력한 사용자의 입장에서 보거나/선택하거나/언급한대로의 개념, 혹은 사용자가 의도한 의미를 사람이 사용하는 언어로 표현한 것임." />
    </element>
    <element id="DocumentReference.context.related.identifier.system">
      <path value="DocumentReference.context.related.identifier.system" />
      <short value="식별자 값의 네임스페이스(namespace)" />
      <definition value="설정값에 대한 네임 스페이스 (namespace), 즉 고유한 설정값을 설명하는 URL을 설정함." />
    </element>
    <element id="DocumentReference.context.related.identifier.value">
      <path value="DocumentReference.context.related.identifier.value" />
      <short value="고유 설정값" />
      <definition value="일반적으로 식별자의 사용과와 관련이 있으며, 시스템 컨텍스트 (context) 내에서 고유한 식별자의 일부분임." />
    </element>
    <element id="DocumentReference.context.related.identifier.period">
      <path value="DocumentReference.context.related.identifier.period" />
      <short value="식별자의 유효 기간" />
      <definition value="식별자가 사용 가능했거나 가능한 기간을 나타냄." />
    </element>
    <element id="DocumentReference.context.related.identifier.period.start">
      <path value="DocumentReference.context.related.identifier.period.start" />
      <short value="해당 유효 기간의 시작 시점 (설정된 날짜 포함)" />
      <definition value="해당 유효 기간이 시작되는 시점을 나타냄. 유효 기간은 시작 시점으로 설정된 날짜를 포함함." />
    </element>
    <element id="DocumentReference.context.related.identifier.period.end">
      <path value="DocumentReference.context.related.identifier.period.end" />
      <short value="해당 유효 기간의 종료 시점 (설정된 날짜 포함)" />
      <definition value="기간의 종료. 기간의 종료가 누락된 경우, 인스턴스가 생성될 때 끝이 알려지거나 계획되지 않았음을 의미함. 시작일은 과거일 수 있고 종료일은 미래일 수 있음. 이는 해당 기간이 해당 시간에 종료될 예정임을 의미함" />
    </element>
    <element id="DocumentReference.context.related.identifier.assigner">
      <path value="DocumentReference.context.related.identifier.assigner" />
      <short value="식별자를 발급한 조직 (단순 텍스트 기입 가능)" />
      <definition value="식별자를 발급하고 관리하는 조직을 나타냄." />
    </element>
    <element id="DocumentReference.context.related.display">
      <path value="DocumentReference.context.related.display" />
      <short value="해당 리소스를 대체하는 텍스트 설명" />
      <definition value="리소스 참조 외에도 리소스를 식별하기 위한 일반 텍스트 설명임." />
    </element>
  </differential>
</StructureDefinition>