<StructureDefinition xmlns="http://hl7.org/fhir">
  <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-category">
    <valueString value="Foundation.Documents" />
  </extension>
  <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status">
    <valueCode value="trial-use" />
  </extension>
  <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fmm">
    <valueInteger value="2" />
  </extension>
  <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-security-category">
    <valueCode value="not-classified" />
  </extension>
  <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-wg">
    <valueCode value="sd" />
  </extension>
  <url value="http://example.org/fhir/StructureDefinition/Composition" />
  <name value="KR_Composition" />
  <status value="draft" />
  <fhirVersion value="4.0.1" />
  <mapping>
    <identity value="workflow" />
    <uri value="http://hl7.org/fhir/workflow" />
    <name value="KR_Workflow Pattern" />
  </mapping>
  <mapping>
    <identity value="rim" />
    <uri value="http://hl7.org/v3" />
    <name value="KR_RIM Mapping" />
  </mapping>
  <mapping>
    <identity value="cda" />
    <uri value="http://hl7.org/v3/cda" />
    <name value="KR_CDA (R2)" />
  </mapping>
  <mapping>
    <identity value="fhirdocumentreference" />
    <uri value="http://hl7.org/fhir/documentreference" />
    <name value="KR_FHIR DocumentReference" />
  </mapping>
  <mapping>
    <identity value="w5" />
    <uri value="http://hl7.org/fhir/fivews" />
    <name value="KR_FiveWs Pattern Mapping" />
  </mapping>
  <kind value="resource" />
  <abstract value="false" />
  <type value="Composition" />
  <baseDefinition value="http://hl7.org/fhir/StructureDefinition/Composition" />
  <derivation value="constraint" />
  <snapshot>
    <element id="Composition">
      <path value="Composition" />
      <short value="임상적 증명과 진술로 구성된 리소스 모음." />
      <definition value="의미에 대한 한개의 일관성 있는 설명을 제공하고, 고유한 컨텍스트를 설정하며, 누가 설명을 한 것인지에 대한 임상 증명(clinical attestation)이 포함되어 하나의 논리적 패키지로 합쳐진 의료 관련 정보의 집합. Composition[]은 문서에 필요한 구조와 서술 내용을 정의함. 그러나, Composition[]만으로는 문서를 구성할 수 없음. 대신, Composition[]은 Bundle.type=document 의 첫번째 항목이어야 하고, Composition[]에서 참조된 다른 리소스들은 Bundle[]의 하위 항목으로 포함되어야 한다.(예: Patient[], Practitioner[], Encounter[] 등)" />
      <comment value="이 명세는 환자에 맞춰진 임상적 진술(statement)에 초점이 맞춰져 있지만, 이 리소스는 연구 프로토콜 디자인, 의료 청구서 및 환자와 무관하고 임상과 관련없는 기타 활동과 같은 또 다른 의료관련 진술에 적용할 수 있음" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Composition" />
        <min value="0" />
        <max value="*" />
      </base>
      <constraint>
        <key value="dom-2" />
        <severity value="error" />
        <human value="If the resource is contained in another resource, it SHALL NOT contain nested Resources" />
        <expression value="contained.contained.empty()" />
        <xpath value="not(parent::f:contained and f:contained)" />
        <source value="http://hl7.org/fhir/StructureDefinition/DomainResource" />
      </constraint>
      <constraint>
        <key value="dom-4" />
        <severity value="error" />
        <human value="If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated" />
        <expression value="contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()" />
        <xpath value="not(exists(f:contained/*/f:meta/f:versionId)) and not(exists(f:contained/*/f:meta/f:lastUpdated))" />
        <source value="http://hl7.org/fhir/StructureDefinition/DomainResource" />
      </constraint>
      <constraint>
        <key value="dom-3" />
        <severity value="error" />
        <human value="If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource" />
        <expression value="contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty()" />
        <xpath value="not(exists(for $id in f:contained/*/f:id/@value return $contained[not(parent::*/descendant::f:reference/@value=concat('#', $contained/*/id/@value) or descendant::f:reference[@value='#'])]))" />
        <source value="http://hl7.org/fhir/StructureDefinition/DomainResource" />
      </constraint>
      <constraint>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bestpractice">
          <valueBoolean value="true" />
        </extension>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bestpractice-explanation">
          <valueMarkdown value="When a resource has no narrative, only systems that fully understand the data can display the resource to a human safely. Including a human readable representation in the resource makes for a much more robust eco-system and cheaper handling of resources by intermediary systems. Some ecosystems restrict distribution of resources to only those systems that do fully understand the resources, and as a consequence implementers may believe that the narrative is superfluous. However experience shows that such eco-systems often open up to new participants over time." />
        </extension>
        <key value="dom-6" />
        <severity value="warning" />
        <human value="A resource should have narrative for robust management" />
        <expression value="text.`div`.exists()" />
        <xpath value="exists(f:text/h:div)" />
        <source value="http://hl7.org/fhir/StructureDefinition/DomainResource" />
      </constraint>
      <constraint>
        <key value="dom-5" />
        <severity value="error" />
        <human value="If a resource is contained in another resource, it SHALL NOT have a security label" />
        <expression value="contained.meta.security.empty()" />
        <xpath value="not(exists(f:contained/*/f:meta/f:security))" />
        <source value="http://hl7.org/fhir/StructureDefinition/DomainResource" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="Entity. Role, or Act" />
      </mapping>
      <mapping>
        <identity value="workflow" />
        <map value="Event" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="Document[classCode=&quot;DOC&quot; and moodCode=&quot;EVN&quot; and isNormalAct()]" />
      </mapping>
      <mapping>
        <identity value="cda" />
        <map value="ClinicalDocument" />
      </mapping>
      <mapping>
        <identity value="fhirdocumentreference" />
        <map value="when described by DocumentReference" />
      </mapping>
    </element>
    <element id="Composition.id">
      <path value="Composition.id" />
      <short value="이 아티팩스(artifact)의 논리적 ID" />
      <definition value="임상적 증명과 진술로 구성된 리소스 모음." />
      <comment value="The only time that a resource does not have an id is when it is being submitted to the server using a create operation." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Resource.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <isSummary value="true" />
    </element>
    <element id="Composition.meta">
      <path value="Composition.meta" />
      <short value="리소스(resource)에 대한 메타 데이터" />
      <definition value="리소스(resource)에 대한 메타 데이터임. 이것은 인프라에 의해 유지관리되는 컨텐츠(content)임. 컨텐츠(content) 변경 사항이 항상 리소스(resource)의 버전 변경 사항과 연관되어 있지는 않을 수 있음." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Resource.meta" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="Meta" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.meta.id">
      <path value="Composition.meta.id" />
      <representation value="xmlAttr" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.meta.extension">
      <path value="Composition.meta.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.meta.versionId">
      <path value="Composition.meta.versionId" />
      <short value="버전별 식별자(identifier)" />
      <definition value="URL의 버전 부분에 나타나는 버전별 식별자(identifier)임. 이 값은 리소스(resource)가 생성,업데이트, 또는 삭제될 떄 변경됨." />
      <comment value="The server assigns this value, and ignores what the client specifies, except in the case that the server is imposing version integrity on updates/deletes." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Meta.versionId" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="id" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.meta.lastUpdated">
      <path value="Composition.meta.lastUpdated" />
      <short value="리소스(resource) 버전이 마지막으로 변경된 시점" />
      <definition value="리소스(resource)가 마지막으로 변경된 경우 - 예를 들어 버전이 변경된 경우" />
      <comment value="This value is always populated except when the resource is first being created. The server / resource manager sets this value; what a client provides is irrelevant. This is equivalent to the HTTP Last-Modified and SHOULD have the same value on a [read](http.html#read) interaction." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Meta.lastUpdated" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="instant" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.meta.source">
      <path value="Composition.meta.source" />
      <short value="리소스(resource)의 출처 식별" />
      <definition value="리소스(resource)의 소스 시스템을 식별하는 uri. 이를 통해 리소스 정보의 출처를 추적하거나, 차별화 하는데 사용 할수 있는 최소한의 [Provenance](provenance.html#) 정보를 얻을 수 있음. 소스가 다른 FHIR 서버, 문서, 메시지 데이터베이스 등을 식별할수 있음." />
      <comment value="In the provenance resource, this corresponds to Provenance.entity.what[x]. The exact use of the source (and the implied Provenance.entity.role) is left to implementer discretion. Only one nominated source is allowed; for additional provenance details, a full Provenance resource should be used. &#xA;&#xA;This element can be used to indicate where the current master source of a resource that has a canonical URL if the resource is no longer hosted at the canonical URL." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Meta.source" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="uri" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.meta.profile">
      <path value="Composition.meta.profile" />
      <short value="이 리소스(resource)가 준수하는 프로파일" />
      <definition value="이 리소스(resource)가 준수하는 프로파일 목록 ([StructureDefinition] (structuredefinition.html #) 리소스에 대한 참조)임. URL은 [StructureDefinition.url] (structuredefinition-definitions.html # StructureDefinition.url)에 대한 참조임." />
      <comment value="It is up to the server and/or other infrastructure of policy to determine whether/how these claims are verified and/or updated over time.  The list of profile URLs is a set." />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Meta.profile" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="canonical" />
        <targetProfile value="http://hl7.org/fhir/StructureDefinition/StructureDefinition" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.meta.security">
      <path value="Composition.meta.security" />
      <short value="이 리소스(resource)에 적용된 보안 레이블" />
      <definition value="이 리소스(resource)에 적용된 보안 레이블임. 이러한 태그는 특정 리소스를 전체 보안 정책 및 인프라에 연결함" />
      <comment value="The security labels can be updated without changing the stated version of the resource. The list of security labels is a set. Uniqueness is based the system/code, and version and display are ignored." />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Meta.security" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Coding" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="SecurityLabels" />
        </extension>
        <strength value="extensible" />
        <description value="Security Labels from the Healthcare Privacy and Security Classification System." />
        <valueSet value="http://hl7.org/fhir/ValueSet/security-labels" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CE/CNE/CWE subset one of the sets of component 1-3 or 4-6" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CV" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding rdfs:subClassOf dt:CDCoding" />
      </mapping>
    </element>
    <element id="Composition.meta.security.id">
      <path value="Composition.meta.security.id" />
      <representation value="xmlAttr" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.meta.security.extension">
      <path value="Composition.meta.security.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.meta.security.system">
      <path value="Composition.meta.security.system" />
      <short value="용어체계 식별(Identity of terminology system)" />
      <definition value="코드(code)에서 기호(symbol)의 의미를 정의하는 CodeSystem[]를 식별" />
      <comment value="The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...).  OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously." />
      <requirements value="Need to be unambiguous about the source of the definition of the symbol." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.system" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="uri" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.3" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./codeSystem" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem" />
      </mapping>
    </element>
    <element id="Composition.meta.security.version">
      <path value="Composition.meta.security.version" />
      <short value="해당 시스템의 버전 정보 - 필요한 경우" />
      <definition value="해당 코드(code)를 선택한 시점에 사용된 CodeSystem[]의 버전임. 올바로 관리된 CodeSystem[]은 코드(code)의 의미가 버전과 관계없이 일관적이므로 버전을 보고할 필요가 없음. 그러나 CodeSystem[]의 관리 상태는 지속적으로 보장할 수 없는 부분이며, 코드(code)의 의미가 일관적임을 보장할 수 없는 경우 버전이 교체되어야 함." />
      <comment value="Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.version" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.7" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./codeSystemVersion" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion" />
      </mapping>
    </element>
    <element id="Composition.meta.security.code">
      <path value="Composition.meta.security.code" />
      <short value="시스템에 정의된 구문(syntax)의 기호(symbol)" />
      <definition value="시스템에 정의된 구문(syntax)의 기호(symbol). 기호(symbol)은 CodeSystem[]에 의해 정의된 구문에서 미리 정의된 코드(code) 또는 표현(expression)일 수 있음. (예: post-coordination)" />
      <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" />
      <requirements value="Need to refer to a particular code in the system." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.code" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="code" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.1" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./code" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code" />
      </mapping>
    </element>
    <element id="Composition.meta.security.display">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="Composition.meta.security.display" />
      <short value="시스템에 정의된 표기(representation)" />
      <definition value="시스템의 규칙(rules)에 따른, 시스템에서 코드(code)의 의미 표기(representation)" />
      <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" />
      <requirements value="Need to be able to carry a human-readable meaning of the code for readers that do not know  the system." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.display" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.2 - but note this is not well followed" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CV.displayName" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName" />
      </mapping>
    </element>
    <element id="Composition.meta.security.userSelected">
      <path value="Composition.meta.security.userSelected" />
      <short value="해당 코딩(coding)이 사용자(user)에 의해 직접(directly) 선택되었는지 여부" />
      <definition value="해당 코딩(coding)이 사용자(user)에 의해 직접 선택되었음을 나타냄 - (예) 사용가능한 항목(item)의 선택 목록(list) 중 하나 (코드 또는 디스플레이 )" />
      <comment value="Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely." />
      <requirements value="This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.userSelected" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="boolean" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="Sometimes implied by being first" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CD.codingRationale" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map;   fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [     fhir:source &quot;true&quot;;     fhir:target dt:CDCoding.codingRationale\#O   ]" />
      </mapping>
    </element>
    <element id="Composition.meta.tag">
      <path value="Composition.meta.tag" />
      <short value="이 리소스(resource)에 적용된 태그." />
      <definition value="이 리소스(resource)에 적용된 태그.  태그는 리소스를 식별하고 프로세스 및 워크플로에 연결하는 데 사용되며, 애플리케이션은 리소스의 의미를 해석할 때 태그를 고려할 필요 없음." />
      <comment value="The tags can be updated without changing the stated version of the resource. The list of tags is a set. Uniqueness is based the system/code, and version and display are ignored." />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Meta.tag" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Coding" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="Tags" />
        </extension>
        <strength value="example" />
        <description value="Codes that represent various types of tags, commonly workflow-related; e.g. &quot;Needs review by Dr. Jones&quot;." />
        <valueSet value="http://hl7.org/fhir/ValueSet/common-tags" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CE/CNE/CWE subset one of the sets of component 1-3 or 4-6" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CV" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding rdfs:subClassOf dt:CDCoding" />
      </mapping>
    </element>
    <element id="Composition.meta.tag.id">
      <path value="Composition.meta.tag.id" />
      <representation value="xmlAttr" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.meta.tag.extension">
      <path value="Composition.meta.tag.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.meta.tag.system">
      <path value="Composition.meta.tag.system" />
      <short value="용어체계 식별(Identity of terminology system)" />
      <definition value="코드(code)에서 기호(symbol)의 의미를 정의하는 CodeSystem[]를 식별" />
      <comment value="The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...).  OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously." />
      <requirements value="Need to be unambiguous about the source of the definition of the symbol." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.system" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="uri" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.3" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./codeSystem" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem" />
      </mapping>
    </element>
    <element id="Composition.meta.tag.version">
      <path value="Composition.meta.tag.version" />
      <short value="해당 시스템의 버전 정보 - 필요한 경우" />
      <definition value="해당 코드(code)를 선택한 시점에 사용된 CodeSystem[]의 버전임. 올바로 관리된 CodeSystem[]은 코드(code)의 의미가 버전과 관계없이 일관적이므로 버전을 보고할 필요가 없음. 그러나 CodeSystem[]의 관리 상태는 지속적으로 보장할 수 없는 부분이며, 코드(code)의 의미가 일관적임을 보장할 수 없는 경우 버전이 교체되어야 함." />
      <comment value="Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.version" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.7" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./codeSystemVersion" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion" />
      </mapping>
    </element>
    <element id="Composition.meta.tag.code">
      <path value="Composition.meta.tag.code" />
      <short value="시스템에 정의된 구문(syntax)의 기호(symbol)" />
      <definition value="시스템에 정의된 구문(syntax)의 기호(symbol). 기호(symbol)은 CodeSystem[]에 의해 정의된 구문에서 미리 정의된 코드(code) 또는 표현(expression)일 수 있음. (예: post-coordination)" />
      <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" />
      <requirements value="Need to refer to a particular code in the system." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.code" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="code" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.1" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./code" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code" />
      </mapping>
    </element>
    <element id="Composition.meta.tag.display">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="Composition.meta.tag.display" />
      <short value="시스템에 정의된 표기(representation)" />
      <definition value="시스템의 규칙(rules)에 따른, 시스템에서 코드(code)의 의미 표기(representation)" />
      <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" />
      <requirements value="Need to be able to carry a human-readable meaning of the code for readers that do not know  the system." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.display" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.2 - but note this is not well followed" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CV.displayName" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName" />
      </mapping>
    </element>
    <element id="Composition.meta.tag.userSelected">
      <path value="Composition.meta.tag.userSelected" />
      <short value="해당 코딩(coding)이 사용자(user)에 의해 직접(directly) 선택되었는지 여부" />
      <definition value="해당 코딩(coding)이 사용자(user)에 의해 직접 선택되었음을 나타냄 - (예) 사용가능한 항목(item)의 선택 목록(list) 중 하나 (코드 또는 디스플레이 )" />
      <comment value="Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely." />
      <requirements value="This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.userSelected" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="boolean" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="Sometimes implied by being first" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CD.codingRationale" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map;   fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [     fhir:source &quot;true&quot;;     fhir:target dt:CDCoding.codingRationale\#O   ]" />
      </mapping>
    </element>
    <element id="Composition.implicitRules">
      <path value="Composition.implicitRules" />
      <short value="이 컨텐츠(content)가 생성된 일련의 규칙" />
      <definition value="리소스(resource)를 구성될 때, 준수되고 컨텐츠(content)를 처리할 때 이해해야 하는 규칙 집합(set of rules)에 대한 참조. 많은 경우, 이것은 다른 Profile[프로파일] 등과 함께 특수 규칙을 정의하는 구현 가이드에 대한 참조임." />
      <comment value="Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Resource.implicitRules" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="uri" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isModifier value="true" />
      <isModifierReason value="This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation" />
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.language">
      <path value="Composition.language" />
      <short value="리소스(resource) 컨텐츠(content) 언어" />
      <definition value="리소스(resource)가 기록된 기본 언어" />
      <comment value="Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies  to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute)." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Resource.language" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="code" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-maxValueSet">
          <valueCanonical value="http://hl7.org/fhir/ValueSet/all-languages" />
        </extension>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="Language" />
        </extension>
        <strength value="preferred" />
        <description value="A human language." />
        <valueSet value="http://hl7.org/fhir/ValueSet/languages" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.text">
      <path value="Composition.text" />
      <short value="사람의 해석을 위한 리소스(resource)의 텍스트 요약" />
      <definition value="리소스(resource) 요약을 포함하고 사람에게 리소스(resource) 내용을 나타내는 데 사용될 수 있는 사람이 읽을 수 있는 서술임. 서술은 모든 구조화된 데이터를 인코딩할 필요는 없지만, 사람이 서술을 읽기만한다면 &quot;clinically safe&quot; 데이터를 만들기 위해 충분한 세부정보를 포함해야 함. 리소스 정의는 임상적 안정성을 보장하기 위해 서술에 어떤 내용을 나타내야 하는지를 정의할  수 있음." />
      <comment value="Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied).  This may be necessary for data from legacy systems where information is captured as a &quot;text blob&quot; or where text is additionally entered raw or narrated and encoded information is added later." />
      <alias value="narrative" />
      <alias value="html" />
      <alias value="xhtml" />
      <alias value="display" />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="DomainResource.text" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="Narrative" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="Act.text?" />
      </mapping>
    </element>
    <element id="Composition.text.id">
      <path value="Composition.text.id" />
      <representation value="xmlAttr" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.text.extension">
      <path value="Composition.text.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.text.status">
      <path value="Composition.text.status" />
      <short value="generated | extensions | additional | empty" />
      <definition value="설명의 상태. 자동으로 생성 되었는지, 사람에 의해 수동적으로 생성되었는지, 데이터 추가가 가능한지 여부를 나타냄." />
      <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" />
      <min value="1" />
      <max value="1" />
      <base>
        <path value="Narrative.status" />
        <min value="1" />
        <max value="1" />
      </base>
      <type>
        <code value="code" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="NarrativeStatus" />
        </extension>
        <strength value="required" />
        <description value="The status of a resource narrative." />
        <valueSet value="http://hl7.org/fhir/ValueSet/narrative-status|4.0.1" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.text.div">
      <path value="Composition.text.div" />
      <short value="제한된 XHTML 컨텐츠(content)" />
      <definition value="설명의 실제 컨텐츠(content). 가장 기본적인 XHTML 버전임." />
      <comment value="The contents of the html element are an XHTML fragment containing only the basic html formatting elements described in chapters 7-11 and 15 of the HTML 4.0 standard, &lt;a&gt; elements (either name or href), images and internally contained stylesheets. The XHTML content SHALL NOT contain a head, a body, external stylesheet references, scripts, forms, base/link/xlink, frames, iframes and objects." />
      <min value="1" />
      <max value="1" />
      <base>
        <path value="Narrative.div" />
        <min value="1" />
        <max value="1" />
      </base>
      <type>
        <code value="xhtml" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="txt-1" />
        <severity value="error" />
        <human value="The narrative SHALL contain only the basic html formatting elements and attributes described in chapters 7-11 (except section 4 of chapter 9) and 15 of the HTML 4.0 standard, &lt;a&gt; elements (either name or href), images and internally contained style attributes" />
        <expression value="htmlChecks()" />
        <xpath value="not(descendant-or-self::*[not(local-name(.)=('a', 'abbr', 'acronym', 'b', 'big', 'blockquote', 'br', 'caption', 'cite', 'code', 'col', 'colgroup', 'dd', 'dfn', 'div', 'dl', 'dt', 'em', 'h1', 'h2', 'h3', 'h4', 'h5', 'h6', 'hr', 'i', 'img', 'li', 'ol', 'p', 'pre', 'q', 'samp', 'small', 'span', 'strong', 'sub', 'sup', 'table', 'tbody', 'td', 'tfoot', 'th', 'thead', 'tr', 'tt', 'ul', 'var'))]) and not(descendant-or-self::*/@*[not(name(.)=('abbr', 'accesskey', 'align', 'alt', 'axis', 'bgcolor', 'border', 'cellhalign', 'cellpadding', 'cellspacing', 'cellvalign', 'char', 'charoff', 'charset', 'cite', 'class', 'colspan', 'compact', 'coords', 'dir', 'frame', 'headers', 'height', 'href', 'hreflang', 'hspace', 'id', 'lang', 'longdesc', 'name', 'nowrap', 'rel', 'rev', 'rowspan', 'rules', 'scope', 'shape', 'span', 'src', 'start', 'style', 'summary', 'tabindex', 'title', 'type', 'valign', 'value', 'vspace', 'width'))])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Narrative" />
      </constraint>
      <constraint>
        <key value="txt-2" />
        <severity value="error" />
        <human value="The narrative SHALL have some non-whitespace content" />
        <expression value="htmlChecks()" />
        <xpath value="descendant::text()[normalize-space(.)!=''] or descendant::h:img[@src]" />
        <source value="http://hl7.org/fhir/StructureDefinition/Narrative" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.contained">
      <path value="Composition.contained" />
      <short value="포함된(contained), 인라인(inline) 리소스(resource)" />
      <definition value="이러한 리소스(resource)은 리소스를 포함하는 리소스와 별도로 독립적인 존재가 아님- 독립적으로 식별할 수 없으며, 자체 독립 트랜잭션(transaction) 범위를 가질 수도 없음." />
      <comment value="This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels." />
      <alias value="inline resources" />
      <alias value="anonymous resources" />
      <alias value="contained resources" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="DomainResource.contained" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Resource" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="Entity. Role, or Act" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.extension">
      <path value="Composition.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="DomainResource.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.modifierExtension">
      <path value="Composition.modifierExtension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Extensions that cannot be ignored" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.&#xA;&#xA;Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself)." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <requirements value="Modifier extensions allow for extensions that *cannot* be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored.  This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the [definition of modifier extensions](extensibility.html#modifierExtension)." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="DomainResource.modifierExtension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <isModifier value="true" />
      <isModifierReason value="Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.identifier">
      <path value="Composition.identifier" />
      <short value="Composition[]에 대한 버전 독립적인 식별자" />
      <definition value="Composition[]에 대한 버전 독립적인 식별자. 이 식별자는 구성이 시간에 따라 변경되어도 일정하게 유지됨" />
      <comment value="CDA의 ClinicalDocument/setId와 유사함. 연관성에 대해서는 리소스 정의관련 설명을 참조." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Composition.identifier" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="Identifier" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX / EI (occasionally, more often EI maps to a resource id or a URL)" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs.  Also maps to Role[classCode=IDENT]" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="Identifier" />
      </mapping>
      <mapping>
        <identity value="workflow" />
        <map value="Event.identifier" />
      </mapping>
      <mapping>
        <identity value="w5" />
        <map value="FiveWs.identifier" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="Document.id / Document.setId" />
      </mapping>
      <mapping>
        <identity value="cda" />
        <map value=".setId" />
      </mapping>
      <mapping>
        <identity value="fhirdocumentreference" />
        <map value="DocumentReference.masterIdentifier" />
      </mapping>
    </element>
    <element id="Composition.identifier.id">
      <path value="Composition.identifier.id" />
      <representation value="xmlAttr" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.identifier.extension">
      <path value="Composition.identifier.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.identifier.use">
      <path value="Composition.identifier.use" />
      <short value="usual | official | temp | secondary | old (If known)" />
      <definition value="해당 식별자(identifier)의 목적" />
      <comment value="Applications can assume that an identifier is permanent unless it explicitly says that it is temporary." />
      <requirements value="Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.use" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="code" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isModifier value="true" />
      <isModifierReason value="This is labeled as &quot;Is Modifier&quot; because applications should not mistake a temporary id for a permanent one." />
      <isSummary value="true" />
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="IdentifierUse" />
        </extension>
        <strength value="required" />
        <description value="Identifies the purpose for this identifier, if known ." />
        <valueSet value="http://hl7.org/fhir/ValueSet/identifier-use|4.0.1" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="N/A" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="Role.code or implied by context" />
      </mapping>
    </element>
    <element id="Composition.identifier.type">
      <path value="Composition.identifier.type" />
      <short value="식별자(identifier)에 대한 설명" />
      <definition value="특정 목적으로 사용되는 식별자(identifier)를 결정하기 위해 사용하는 식별자(identifier)의 코드화된(coded) 유형(type)을 나타냄." />
      <comment value="This element deals only with general categories of identifiers.  It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage.   Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type." />
      <requirements value="Allows users to make use of identifiers when the identifier system is not known." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.type" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="CodeableConcept" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="IdentifierType" />
        </extension>
        <strength value="extensible" />
        <description value="A coded type for an identifier that can be used to determine which identifier to use for a specific purpose." />
        <valueSet value="http://hl7.org/fhir/ValueSet/identifier-type" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CE/CNE/CWE" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CD" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept rdfs:subClassOf dt:CD" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.5" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="Role.code or implied by context" />
      </mapping>
    </element>
    <element id="Composition.identifier.type.id">
      <path value="Composition.identifier.type.id" />
      <representation value="xmlAttr" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.identifier.type.extension">
      <path value="Composition.identifier.type.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.identifier.type.coding">
      <path value="Composition.identifier.type.coding" />
      <short value="용어체계(terminology system)에 의해 정의된 코드(code)" />
      <definition value="용어체계(terminology system)에 의해 정의된 코드(code) 참조" />
      <comment value="Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information.  Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true." />
      <requirements value="Allows for alternative encodings within a code system, and translations to other code systems." />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="CodeableConcept.coding" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Coding" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CE/CNE/CWE subset one of the sets of component 1-3 or 4-6" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CV" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding rdfs:subClassOf dt:CDCoding" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.1-8, C*E.10-22" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="union(., ./translation)" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding" />
      </mapping>
    </element>
    <element id="Composition.identifier.type.coding.id">
      <path value="Composition.identifier.type.coding.id" />
      <representation value="xmlAttr" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.identifier.type.coding.extension">
      <path value="Composition.identifier.type.coding.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.identifier.type.coding.system">
      <path value="Composition.identifier.type.coding.system" />
      <short value="용어체계 식별(Identity of terminology system)" />
      <definition value="코드(code)에서 기호(symbol)의 의미를 정의하는 CodeSystem[]를 식별" />
      <comment value="The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...).  OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously." />
      <requirements value="Need to be unambiguous about the source of the definition of the symbol." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.system" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="uri" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.3" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./codeSystem" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem" />
      </mapping>
    </element>
    <element id="Composition.identifier.type.coding.version">
      <path value="Composition.identifier.type.coding.version" />
      <short value="해당 시스템의 버전 정보 - 필요한 경우" />
      <definition value="해당 코드(code)를 선택한 시점에 사용된 CodeSystem[]의 버전임. 올바로 관리된 CodeSystem[]은 코드(code)의 의미가 버전과 관계없이 일관적이므로 버전을 보고할 필요가 없음. 그러나 CodeSystem[]의 관리 상태는 지속적으로 보장할 수 없는 부분이며, 코드(code)의 의미가 일관적임을 보장할 수 없는 경우 버전이 교체되어야 함." />
      <comment value="Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.version" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.7" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./codeSystemVersion" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion" />
      </mapping>
    </element>
    <element id="Composition.identifier.type.coding.code">
      <path value="Composition.identifier.type.coding.code" />
      <short value="시스템에 정의된 구문(syntax)의 기호(symbol)" />
      <definition value="시스템에 정의된 구문(syntax)의 기호(symbol). 기호(symbol)은 CodeSystem[]에 의해 정의된 구문에서 미리 정의된 코드(code) 또는 표현(expression)일 수 있음. (예: post-coordination)" />
      <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" />
      <requirements value="Need to refer to a particular code in the system." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.code" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="code" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.1" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./code" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code" />
      </mapping>
    </element>
    <element id="Composition.identifier.type.coding.display">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="Composition.identifier.type.coding.display" />
      <short value="시스템에 정의된 표기(representation)" />
      <definition value="시스템의 규칙(rules)에 따른, 시스템에서 코드(code)의 의미 표기(representation)" />
      <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" />
      <requirements value="Need to be able to carry a human-readable meaning of the code for readers that do not know  the system." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.display" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.2 - but note this is not well followed" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CV.displayName" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName" />
      </mapping>
    </element>
    <element id="Composition.identifier.type.coding.userSelected">
      <path value="Composition.identifier.type.coding.userSelected" />
      <short value="해당 코딩(coding)이 사용자(user)에 의해 직접(directly) 선택되었는지 여부" />
      <definition value="해당 코딩(coding)이 사용자(user)에 의해 직접 선택되었음을 나타냄 - (예) 사용가능한 항목(item)의 선택 목록(list) 중 하나 (코드 또는 디스플레이 )" />
      <comment value="Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely." />
      <requirements value="This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.userSelected" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="boolean" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="Sometimes implied by being first" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CD.codingRationale" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map;   fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [     fhir:source &quot;true&quot;;     fhir:target dt:CDCoding.codingRationale\#O   ]" />
      </mapping>
    </element>
    <element id="Composition.identifier.type.text">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="Composition.identifier.type.text" />
      <short value="개념(concept)에 대한 일반 텍스트 표현 (plain text representation)" />
      <definition value="데이터를 입력한 사용자(user)의 입장에서 보거나(seen)/선택하거나(selected)/언급한대로(uttered)의 개념(concept), 혹은 사용자(user)가 의도한 의미를 사람이 사용하는 언어로 표현한 것임." />
      <comment value="Very often the text is the same as a displayName of one of the codings." />
      <requirements value="The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="CodeableConcept.text" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.9. But note many systems use C*E.2 for this" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./originalText[mediaType/code=&quot;text/plain&quot;]/data" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText" />
      </mapping>
    </element>
    <element id="Composition.identifier.system">
      <path value="Composition.identifier.system" />
      <short value="식별자(identifier) 값의 네임스페이스(namespace)" />
      <definition value="설정 값에 대한 네임스페이스 (namespace), 즉 고유(unique)한 설정값을 설명하는 URL을 설정함." />
      <comment value="Identifier.system is always case sensitive." />
      <requirements value="There are many sets  of identifiers.  To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.system" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="uri" />
      </type>
      <example>
        <label value="General" />
        <valueUri value="http://www.acme.com/identifiers/patient" />
      </example>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.4 / EI-2-4" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="II.root or Role.id.root" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="./IdentifierType" />
      </mapping>
    </element>
    <element id="Composition.identifier.value">
      <path value="Composition.identifier.value" />
      <short value="고유(unique)한 값(value)" />
      <definition value="일반적으로 사용자(user)와 관련(relevant)이 있으며, 시스템 컨텍스트(context) 내에서 고유(unique)한 식별자(identifier)의 일부분임." />
      <comment value="If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986.  The value's primary purpose is computational mapping.  As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.)  A value formatted for human display can be conveyed using the [Rendered Value extension](extension-rendered-value.html). Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.value" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <example>
        <label value="General" />
        <valueString value="123456" />
      </example>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.1 / EI.1" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root)" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="./Value" />
      </mapping>
    </element>
    <element id="Composition.identifier.period">
      <path value="Composition.identifier.period" />
      <short value="식별자(identifier)의 유효 기간" />
      <definition value="식별자(identifier)가 사용 가능했거나 가능한 기간을 나타냄." />
      <comment value="A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. &quot;the patient was an inpatient of the hospital for this time range&quot;) or one value from the range applies (e.g. &quot;give to the patient between these two times&quot;).&#xA;&#xA;Period is not used for a duration (a measure of elapsed time). See [Duration](datatypes.html#Duration)." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.period" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="Period" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="per-1" />
        <severity value="error" />
        <human value="If present, start SHALL have a lower value than end" />
        <expression value="start.hasValue().not() or end.hasValue().not() or (start &lt;= end)" />
        <xpath value="not(exists(f:start/@value)) or not(exists(f:end/@value)) or (xs:dateTime(f:start/@value) &lt;= xs:dateTime(f:end/@value))" />
        <source value="http://hl7.org/fhir/StructureDefinition/Period" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="DR" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="IVL&lt;TS&gt;[lowClosed=&quot;true&quot; and highClosed=&quot;true&quot;] or URG&lt;TS&gt;[lowClosed=&quot;true&quot; and highClosed=&quot;true&quot;]" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.7 + CX.8" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="Role.effectiveTime or implied by context" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="./StartDate and ./EndDate" />
      </mapping>
    </element>
    <element id="Composition.identifier.period.id">
      <path value="Composition.identifier.period.id" />
      <representation value="xmlAttr" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.identifier.period.extension">
      <path value="Composition.identifier.period.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.identifier.period.start">
      <path value="Composition.identifier.period.start" />
      <short value="해당 유효 기간의 시작 시점 (설정된 날짜 포함)" />
      <definition value="해당 유효 기간이 시작되는 시점을 나타냄. 유효 기간은 시작 시점으로 설정된 날짜를 포함함." />
      <comment value="If the low element is missing, the meaning is that the low boundary is not known." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Period.start" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="dateTime" />
      </type>
      <condition value="ele-1" />
      <condition value="per-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="DR.1" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./low" />
      </mapping>
    </element>
    <element id="Composition.identifier.period.end">
      <path value="Composition.identifier.period.end" />
      <short value="해당 유효 기간의 종료 시점 (설정된 날짜 포함)" />
      <definition value="기간의 종료. 기간의 종료가 누락된 경우, 인스턴스가 생성될 때 끝이 알려지거나 계획되지 않았음을 의미함. 시작일은 과거일 수 있고 종료일은 미래일 수 있음. 이는 해당 기간이 해당 시간에 종료될 예정임을 의미함" />
      <comment value="The high value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has an end value of 2012-02-03." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Period.end" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="dateTime" />
      </type>
      <meaningWhenMissing value="If the end of the period is missing, it means that the period is ongoing" />
      <condition value="ele-1" />
      <condition value="per-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="DR.2" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./high" />
      </mapping>
    </element>
    <element id="Composition.identifier.assigner">
      <path value="Composition.identifier.assigner" />
      <short value="식별자(identifier)를 발급한 조직(단순 텍스트 기입 가능)" />
      <definition value="식별자(identifier)를 발급/관리하는 조직(organization)" />
      <comment value="The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.assigner" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="Reference" />
        <targetProfile value="http://hl7.org/fhir/StructureDefinition/Organization" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ref-1" />
        <severity value="error" />
        <human value="SHALL have a contained resource if a local reference is provided" />
        <expression value="reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))" />
        <xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Reference" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.4 / (CX.4,CX.9,CX.10)" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="II.assigningAuthorityName but note that this is an improper use by the definition of the field.  Also Role.scoper" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="./IdentifierIssuingAuthority" />
      </mapping>
    </element>
    <element id="Composition.identifier.assigner.id">
      <path value="Composition.identifier.assigner.id" />
      <representation value="xmlAttr" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.identifier.assigner.extension">
      <path value="Composition.identifier.assigner.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.identifier.assigner.reference">
      <path value="Composition.identifier.assigner.reference" />
      <short value="문자로 표현된(literal) 참조, 상대적, 내부적 혹은 절대적인 URL" />
      <definition value="다른 리소스(resource)를 찾을 수 있는 위치에 대한 참조를 의미함. 해당 참조는 service base URL에 상대적인(relative) 경우 상대적 참조, 혹은 해당 리소스(resource)를 찾을 수 있는 위치인 절대(absolute) URL일 수 있음. 해당 참조는 버전에 따라 다를 수 있음. 해당 참조가 FHIR RESTful 서버가 아닌 경우, 버전에 따라 다른 것으로 간주함. 내부 구문(Internal Fragment) 참조('#'으로 시작)는 포함되어 있는 리소스(resource)를 참조함." />
      <comment value="Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries.   Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure &quot;/[type]/[id]&quot; then it should be assumed that the reference is to a FHIR RESTful server." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Reference.reference" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <condition value="ref-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.identifier.assigner.type">
      <path value="Composition.identifier.assigner.type" />
      <short value="참조(reference)가 참조(refer)하는 유형(type)  (예. &quot;Patient&quot;)" />
      <definition value="참조 대상의 예상 형식(expected type).  Reference.type과 Reference.reference가 모두 채워지고 Reference.reference가 FHIR URL이면 두가지 모두 일치해야함. 유형(type)은이 참조가 참조하는 유형(type) 인 리소스(resource) 정의의 표준(Canonical) URL임. 참조는 http://hl7.org/fhir/StructureDefinition/과 관련된 URL임. (예) &quot; 환자 &quot; http://hl7.org/fhir/StructureDefinition/Patient에 대한 참조. 절대(absolute) URL은 논리 모델에만 허용됨 (리소스(resource)가 아닌 논리 모델의 참조에서만 사용할 수 있음)." />
      <comment value="This element is used to indicate the type of  the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Reference.type" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="uri" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="FHIRResourceTypeExt" />
        </extension>
        <strength value="extensible" />
        <description value="Aa resource (or, for logical models, the URI of the logical model)." />
        <valueSet value="http://hl7.org/fhir/ValueSet/resource-types" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.identifier.assigner.identifier">
      <path value="Composition.identifier.assigner.identifier" />
      <short value="문자로 표현된(literal) 참조를 알 수 없는 경우 사용하는, 논리적(logical) 참조" />
      <definition value="대상 리소스(resource)의 식별자(identifier). 이것은 다른 리소스(resource)를 직접 참조할 방법이 없을 때 사용- 해당 엔티티(entity)가 FHIR 서버를 통해 사용할 수 없거나  리소스(resource) 작성자가 알려진 식별자(identifier)를 실제 위치로 변활할 방법이 없기 때문에 이 방법이 사용됨. Reference.identifier가 실제로 FHIR 인스턴스로 노출되는 것을 가리킬(point) 필요는 없지만, FHIR 인스턴스로 노출될 것으로 예상되는 비즈니스 개념(concept)을 가리켜야하며, 해당 인스턴스는 참조가 허용되는 FHIR 리소스 타입(resource type)이여야 함." />
      <comment value="When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. &#xA;&#xA;When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference&#xA;&#xA;Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.&#xA;&#xA;Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference.  For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport).  One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any)." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Reference.identifier" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="Identifier" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX / EI (occasionally, more often EI maps to a resource id or a URL)" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs.  Also maps to Role[classCode=IDENT]" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="Identifier" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value=".identifier" />
      </mapping>
    </element>
    <element id="Composition.identifier.assigner.display">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="Composition.identifier.assigner.display" />
      <short value="해당 리소스(resource)에 대한 대체 텍스트(alternative text)" />
      <definition value="리소스(resource) 참조 외에도 리소스(resource)를 식별하기 위한 일반 텍스트 설명임." />
      <comment value="This is generally not the same as the Resource.text of the referenced resource.  The purpose is to identify what's being referenced, not to fully describe it." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Reference.display" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.status">
      <path value="Composition.status" />
      <short value="preliminary | final | amended | entered-in-error" />
      <definition value="이 Composition[]의 workflow/clinical 상태. 즉 문서의 임상적 위치를 대한 표시를 말함" />
      <comment value="만약 Composition[]에 철회 표기가 되어있으면, 시리즈(series) 내의 compositions/documents 또는 그로부터 나온 데이터가 신뢰할 수 없는 정보라고 명확히 표시되지 않은 채 사용자에게 제공되어서는 안됨. 표기(flag) &quot;entered-in-error&quot; 요소(element)가 다른 요소(element)에 대한 한정자로 분류되는 이유임. 일부 리포팅 워크플로우에서는 최종 문서의 본래의 서술이 변경되지 않고 새로운 서술만 추가할 수 있도록 요구할 수 있음. Composition[]리소스는 비즈니스 규칙이 적용되는지 여부를 명시적으로 확인할 수 있는 상태(status)는 없음. 필요시 이런 작업은 익스텐션(extension)으로 처리" />
      <requirements value="Need to be able to mark interim, amended, or withdrawn compositions or documents." />
      <min value="1" />
      <max value="1" />
      <base>
        <path value="Composition.status" />
        <min value="1" />
        <max value="1" />
      </base>
      <type>
        <code value="code" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isModifier value="true" />
      <isModifierReason value="This element is labelled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid" />
      <isSummary value="true" />
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="CompositionStatus" />
        </extension>
        <strength value="required" />
        <description value="The workflow/clinical status of the composition." />
        <valueSet value="http://hl7.org/fhir/ValueSet/composition-status|4.0.1" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="workflow" />
        <map value="Event.status" />
      </mapping>
      <mapping>
        <identity value="w5" />
        <map value="FiveWs.status" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="interim: .completionCode=&quot;IN&quot; &amp; ./statusCode[isNormalDatatype()]=&quot;active&quot;;  final: .completionCode=&quot;AU&quot; &amp;&amp;  ./statusCode[isNormalDatatype()]=&quot;complete&quot; and not(./inboundRelationship[typeCode=&quot;SUBJ&quot; and isNormalActRelationship()]/source[subsumesCode(&quot;ActClass#CACT&quot;) and moodCode=&quot;EVN&quot; and domainMember(&quot;ReviseComposition&quot;, code) and isNormalAct()]);  amended: .completionCode=&quot;AU&quot; &amp;&amp;  ./statusCode[isNormalDatatype()]=&quot;complete&quot; and ./inboundRelationship[typeCode=&quot;SUBJ&quot; and isNormalActRelationship()]/source[subsumesCode(&quot;ActClass#CACT&quot;) and moodCode=&quot;EVN&quot; and domainMember(&quot;ReviseComposition&quot;, code) and isNormalAct() and statusCode=&quot;completed&quot;];  withdrawn : .completionCode=NI &amp;&amp;  ./statusCode[isNormalDatatype()]=&quot;obsolete&quot;" />
      </mapping>
      <mapping>
        <identity value="cda" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="fhirdocumentreference" />
        <map value="DocumentReference.status" />
      </mapping>
    </element>
    <element id="Composition.type">
      <path value="Composition.type" />
      <short value="구성요소(composition) 의 종류 (LOINC이 가능한 경우)" />
      <definition value="특정한 종류의 구성요소(composition)을 지정하는 것으로, 일반적으로 구성요소을 만드는 목적과 동일시 됨.(예 : History, Physical, Discharge, Summary, Progress Note)" />
      <comment value="Compoosition[] 타입에서, LOINC는 널리 사용되며 HL7가 지지하는 용어체계로 대부분의 구현 가이드는 특정한 LOINC코드 또는 LOINC 익스텐션을 사용" />
      <requirements value="Key metadata element describing the composition, used in searching/filtering." />
      <min value="1" />
      <max value="1" />
      <base>
        <path value="Composition.type" />
        <min value="1" />
        <max value="1" />
      </base>
      <type>
        <code value="CodeableConcept" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="DocumentType" />
        </extension>
        <strength value="preferred" />
        <description value="Type of a composition." />
        <valueSet value="http://hl7.org/fhir/ValueSet/doc-typecodes" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CE/CNE/CWE" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CD" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept rdfs:subClassOf dt:CD" />
      </mapping>
      <mapping>
        <identity value="workflow" />
        <map value="Event.code" />
      </mapping>
      <mapping>
        <identity value="w5" />
        <map value="FiveWs.class" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./code" />
      </mapping>
      <mapping>
        <identity value="cda" />
        <map value=".code" />
      </mapping>
      <mapping>
        <identity value="fhirdocumentreference" />
        <map value="DocumentReference.type" />
      </mapping>
    </element>
    <element id="Composition.type.id">
      <path value="Composition.type.id" />
      <representation value="xmlAttr" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.type.extension">
      <path value="Composition.type.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.type.coding">
      <path value="Composition.type.coding" />
      <short value="용어체계(terminology system)에 의해 정의된 코드(code)" />
      <definition value="용어체계(terminology system)에 의해 정의된 코드(code) 참조" />
      <comment value="Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information.  Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true." />
      <requirements value="Allows for alternative encodings within a code system, and translations to other code systems." />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="CodeableConcept.coding" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Coding" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CE/CNE/CWE subset one of the sets of component 1-3 or 4-6" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CV" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding rdfs:subClassOf dt:CDCoding" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.1-8, C*E.10-22" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="union(., ./translation)" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding" />
      </mapping>
    </element>
    <element id="Composition.type.coding.id">
      <path value="Composition.type.coding.id" />
      <representation value="xmlAttr" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.type.coding.extension">
      <path value="Composition.type.coding.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.type.coding.system">
      <path value="Composition.type.coding.system" />
      <short value="용어체계 식별(Identity of terminology system)" />
      <definition value="코드(code)에서 기호(symbol)의 의미를 정의하는 CodeSystem[]를 식별" />
      <comment value="The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...).  OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously." />
      <requirements value="Need to be unambiguous about the source of the definition of the symbol." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.system" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="uri" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.3" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./codeSystem" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem" />
      </mapping>
    </element>
    <element id="Composition.type.coding.version">
      <path value="Composition.type.coding.version" />
      <short value="해당 시스템의 버전 정보 - 필요한 경우" />
      <definition value="해당 코드(code)를 선택한 시점에 사용된 CodeSystem[]의 버전임. 올바로 관리된 CodeSystem[]은 코드(code)의 의미가 버전과 관계없이 일관적이므로 버전을 보고할 필요가 없음. 그러나 CodeSystem[]의 관리 상태는 지속적으로 보장할 수 없는 부분이며, 코드(code)의 의미가 일관적임을 보장할 수 없는 경우 버전이 교체되어야 함." />
      <comment value="Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.version" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.7" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./codeSystemVersion" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion" />
      </mapping>
    </element>
    <element id="Composition.type.coding.code">
      <path value="Composition.type.coding.code" />
      <short value="시스템에 정의된 구문(syntax)의 기호(symbol)" />
      <definition value="시스템에 정의된 구문(syntax)의 기호(symbol). 기호(symbol)은 CodeSystem[]에 의해 정의된 구문에서 미리 정의된 코드(code) 또는 표현(expression)일 수 있음. (예: post-coordination)" />
      <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" />
      <requirements value="Need to refer to a particular code in the system." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.code" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="code" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.1" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./code" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code" />
      </mapping>
    </element>
    <element id="Composition.type.coding.display">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="Composition.type.coding.display" />
      <short value="시스템에 정의된 표기(representation)" />
      <definition value="시스템의 규칙(rules)에 따른, 시스템에서 코드(code)의 의미 표기(representation)" />
      <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" />
      <requirements value="Need to be able to carry a human-readable meaning of the code for readers that do not know  the system." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.display" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.2 - but note this is not well followed" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CV.displayName" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName" />
      </mapping>
    </element>
    <element id="Composition.type.coding.userSelected">
      <path value="Composition.type.coding.userSelected" />
      <short value="해당 코딩(coding)이 사용자(user)에 의해 직접(directly) 선택되었는지 여부" />
      <definition value="해당 코딩(coding)이 사용자(user)에 의해 직접 선택되었음을 나타냄 - (예) 사용가능한 항목(item)의 선택 목록(list) 중 하나 (코드 또는 디스플레이 )" />
      <comment value="Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely." />
      <requirements value="This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.userSelected" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="boolean" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="Sometimes implied by being first" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CD.codingRationale" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map;   fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [     fhir:source &quot;true&quot;;     fhir:target dt:CDCoding.codingRationale\#O   ]" />
      </mapping>
    </element>
    <element id="Composition.type.text">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="Composition.type.text" />
      <short value="개념(concept)에 대한 일반 텍스트 표현 (plain text representation)" />
      <definition value="데이터를 입력한 사용자(user)의 입장에서 보거나(seen)/선택하거나(selected)/언급한대로(uttered)의 개념(concept), 혹은 사용자(user)가 의도한 의미를 사람이 사용하는 언어로 표현한 것임." />
      <comment value="Very often the text is the same as a displayName of one of the codings." />
      <requirements value="The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="CodeableConcept.text" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.9. But note many systems use C*E.2 for this" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./originalText[mediaType/code=&quot;text/plain&quot;]/data" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText" />
      </mapping>
    </element>
    <element id="Composition.category">
      <path value="Composition.category" />
      <short value="구성요소(composition)의 분류" />
      <definition value="구성요소(composition)의 유형 분류는 인덱싱 및 검색에 활용 될 수 있음. 이는 해당 구성요소(composition) 유형에 지정된 코드에 의해 암시되거나 파생될 수 있음." />
      <comment value="[XDSMHD](http:wiki.ihe.netindex.php?title=Mobile_access_to_Health_Documents_(MHD))의 메타데이터 필드" />
      <requirements value="Helps humans to assess whether the composition is of interest when viewing an index of compositions or documents." />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Composition.category" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="CodeableConcept" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="DocumentCategory" />
        </extension>
        <strength value="example" />
        <description value="High-level kind of a clinical document at a macro level." />
        <valueSet value="http://hl7.org/fhir/ValueSet/document-classcodes" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CE/CNE/CWE" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CD" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept rdfs:subClassOf dt:CD" />
      </mapping>
      <mapping>
        <identity value="workflow" />
        <map value="Event.subject" />
      </mapping>
      <mapping>
        <identity value="w5" />
        <map value="FiveWs.class" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value=".outboundRelationship[typeCode=&quot;COMP].target[classCode=&quot;LIST&quot;, moodCode=&quot;EVN&quot;].code" />
      </mapping>
      <mapping>
        <identity value="cda" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="fhirdocumentreference" />
        <map value="DocumenttReference.category" />
      </mapping>
    </element>
    <element id="Composition.category.id">
      <path value="Composition.category.id" />
      <representation value="xmlAttr" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.category.extension">
      <path value="Composition.category.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.category.coding">
      <path value="Composition.category.coding" />
      <short value="용어체계(terminology system)에 의해 정의된 코드(code)" />
      <definition value="용어체계(terminology system)에 의해 정의된 코드(code) 참조" />
      <comment value="Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information.  Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true." />
      <requirements value="Allows for alternative encodings within a code system, and translations to other code systems." />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="CodeableConcept.coding" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Coding" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CE/CNE/CWE subset one of the sets of component 1-3 or 4-6" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CV" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding rdfs:subClassOf dt:CDCoding" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.1-8, C*E.10-22" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="union(., ./translation)" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding" />
      </mapping>
    </element>
    <element id="Composition.category.coding.id">
      <path value="Composition.category.coding.id" />
      <representation value="xmlAttr" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.category.coding.extension">
      <path value="Composition.category.coding.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.category.coding.system">
      <path value="Composition.category.coding.system" />
      <short value="용어체계 식별(Identity of terminology system)" />
      <definition value="코드(code)에서 기호(symbol)의 의미를 정의하는 CodeSystem[]를 식별" />
      <comment value="The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...).  OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously." />
      <requirements value="Need to be unambiguous about the source of the definition of the symbol." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.system" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="uri" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.3" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./codeSystem" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem" />
      </mapping>
    </element>
    <element id="Composition.category.coding.version">
      <path value="Composition.category.coding.version" />
      <short value="해당 시스템의 버전 정보 - 필요한 경우" />
      <definition value="해당 코드(code)를 선택한 시점에 사용된 CodeSystem[]의 버전임. 올바로 관리된 CodeSystem[]은 코드(code)의 의미가 버전과 관계없이 일관적이므로 버전을 보고할 필요가 없음. 그러나 CodeSystem[]의 관리 상태는 지속적으로 보장할 수 없는 부분이며, 코드(code)의 의미가 일관적임을 보장할 수 없는 경우 버전이 교체되어야 함." />
      <comment value="Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.version" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.7" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./codeSystemVersion" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion" />
      </mapping>
    </element>
    <element id="Composition.category.coding.code">
      <path value="Composition.category.coding.code" />
      <short value="시스템에 정의된 구문(syntax)의 기호(symbol)" />
      <definition value="시스템에 정의된 구문(syntax)의 기호(symbol). 기호(symbol)은 CodeSystem[]에 의해 정의된 구문에서 미리 정의된 코드(code) 또는 표현(expression)일 수 있음. (예: post-coordination)" />
      <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" />
      <requirements value="Need to refer to a particular code in the system." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.code" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="code" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.1" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./code" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code" />
      </mapping>
    </element>
    <element id="Composition.category.coding.display">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="Composition.category.coding.display" />
      <short value="시스템에 정의된 표기(representation)" />
      <definition value="시스템의 규칙(rules)에 따른, 시스템에서 코드(code)의 의미 표기(representation)" />
      <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" />
      <requirements value="Need to be able to carry a human-readable meaning of the code for readers that do not know  the system." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.display" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.2 - but note this is not well followed" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CV.displayName" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName" />
      </mapping>
    </element>
    <element id="Composition.category.coding.userSelected">
      <path value="Composition.category.coding.userSelected" />
      <short value="해당 코딩(coding)이 사용자(user)에 의해 직접(directly) 선택되었는지 여부" />
      <definition value="해당 코딩(coding)이 사용자(user)에 의해 직접 선택되었음을 나타냄 - (예) 사용가능한 항목(item)의 선택 목록(list) 중 하나 (코드 또는 디스플레이 )" />
      <comment value="Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely." />
      <requirements value="This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.userSelected" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="boolean" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="Sometimes implied by being first" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CD.codingRationale" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map;   fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [     fhir:source &quot;true&quot;;     fhir:target dt:CDCoding.codingRationale\#O   ]" />
      </mapping>
    </element>
    <element id="Composition.category.text">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="Composition.category.text" />
      <short value="개념(concept)에 대한 일반 텍스트 표현 (plain text representation)" />
      <definition value="데이터를 입력한 사용자(user)의 입장에서 보거나(seen)/선택하거나(selected)/언급한대로(uttered)의 개념(concept), 혹은 사용자(user)가 의도한 의미를 사람이 사용하는 언어로 표현한 것임." />
      <comment value="Very often the text is the same as a displayName of one of the codings." />
      <requirements value="The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="CodeableConcept.text" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.9. But note many systems use C*E.2 for this" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./originalText[mediaType/code=&quot;text/plain&quot;]/data" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText" />
      </mapping>
    </element>
    <element id="Composition.subject">
      <path value="Composition.subject" />
      <short value="누가 그리고 무엇에 대한 구성(composition)인지" />
      <definition value="구성요소(composition)의 주체 누구 혹은 무엇인지를 나타냄. 사람의 경우 (환자 / 건강관리 전문가), 기기(device)의 경우 (예: 기계), 피험자 그룹의 경우 (가축 떼 혹은 공통사항이 있는 환자그룹) 등이 가능함." />
      <comment value="임상문서에서 일반적으로 이 값은 환자를 말함" />
      <requirements value="Essential metadata for searching for the composition. Identifies who and/or what the composition/document is about." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Composition.subject" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="Reference" />
        <targetProfile value="http://hl7.org/fhir/StructureDefinition/Resource" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ref-1" />
        <severity value="error" />
        <human value="SHALL have a contained resource if a local reference is provided" />
        <expression value="reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))" />
        <xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Reference" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" />
      </mapping>
      <mapping>
        <identity value="w5" />
        <map value="FiveWs.subject[x]" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value=".participation[typeCode=&quot;SBJ&quot;].role[typeCode=&quot;PAT&quot;]" />
      </mapping>
      <mapping>
        <identity value="cda" />
        <map value=".recordTarget" />
      </mapping>
      <mapping>
        <identity value="fhirdocumentreference" />
        <map value="DocumentReference.subject" />
      </mapping>
      <mapping>
        <identity value="w5" />
        <map value="FiveWs.subject" />
      </mapping>
    </element>
    <element id="Composition.subject.id">
      <path value="Composition.subject.id" />
      <representation value="xmlAttr" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.subject.extension">
      <path value="Composition.subject.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.subject.reference">
      <path value="Composition.subject.reference" />
      <short value="문자로 표현된(literal) 참조, 상대적, 내부적 혹은 절대적인 URL" />
      <definition value="다른 리소스(resource)를 찾을 수 있는 위치에 대한 참조를 의미함. 해당 참조는 service base URL에 상대적인(relative) 경우 상대적 참조, 혹은 해당 리소스(resource)를 찾을 수 있는 위치인 절대(absolute) URL일 수 있음. 해당 참조는 버전에 따라 다를 수 있음. 해당 참조가 FHIR RESTful 서버가 아닌 경우, 버전에 따라 다른 것으로 간주함. 내부 구문(Internal Fragment) 참조('#'으로 시작)는 포함되어 있는 리소스(resource)를 참조함." />
      <comment value="Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries.   Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure &quot;/[type]/[id]&quot; then it should be assumed that the reference is to a FHIR RESTful server." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Reference.reference" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <condition value="ref-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.subject.type">
      <path value="Composition.subject.type" />
      <short value="참조(reference)가 참조(refer)하는 유형(type)  (예. &quot;Patient&quot;)" />
      <definition value="참조 대상의 예상 형식(expected type).  Reference.type과 Reference.reference가 모두 채워지고 Reference.reference가 FHIR URL이면 두가지 모두 일치해야함. 유형(type)은이 참조가 참조하는 유형(type) 인 리소스(resource) 정의의 표준(Canonical) URL임. 참조는 http://hl7.org/fhir/StructureDefinition/과 관련된 URL임. (예) &quot; 환자 &quot; http://hl7.org/fhir/StructureDefinition/Patient에 대한 참조. 절대(absolute) URL은 논리 모델에만 허용됨 (리소스(resource)가 아닌 논리 모델의 참조에서만 사용할 수 있음)." />
      <comment value="This element is used to indicate the type of  the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Reference.type" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="uri" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="FHIRResourceTypeExt" />
        </extension>
        <strength value="extensible" />
        <description value="Aa resource (or, for logical models, the URI of the logical model)." />
        <valueSet value="http://hl7.org/fhir/ValueSet/resource-types" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.subject.identifier">
      <path value="Composition.subject.identifier" />
      <short value="문자로 표현된(literal) 참조를 알 수 없는 경우 사용하는, 논리적(logical) 참조" />
      <definition value="대상 리소스(resource)의 식별자(identifier). 이것은 다른 리소스(resource)를 직접 참조할 방법이 없을 때 사용- 해당 엔티티(entity)가 FHIR 서버를 통해 사용할 수 없거나  리소스(resource) 작성자가 알려진 식별자(identifier)를 실제 위치로 변활할 방법이 없기 때문에 이 방법이 사용됨. Reference.identifier가 실제로 FHIR 인스턴스로 노출되는 것을 가리킬(point) 필요는 없지만, FHIR 인스턴스로 노출될 것으로 예상되는 비즈니스 개념(concept)을 가리켜야하며, 해당 인스턴스는 참조가 허용되는 FHIR 리소스 타입(resource type)이여야 함." />
      <comment value="When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. &#xA;&#xA;When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference&#xA;&#xA;Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.&#xA;&#xA;Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference.  For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport).  One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any)." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Reference.identifier" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="Identifier" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX / EI (occasionally, more often EI maps to a resource id or a URL)" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs.  Also maps to Role[classCode=IDENT]" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="Identifier" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value=".identifier" />
      </mapping>
    </element>
    <element id="Composition.subject.identifier.id">
      <path value="Composition.subject.identifier.id" />
      <representation value="xmlAttr" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.subject.identifier.extension">
      <path value="Composition.subject.identifier.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.subject.identifier.use">
      <path value="Composition.subject.identifier.use" />
      <short value="usual | official | temp | secondary | old (If known)" />
      <definition value="해당 식별자(identifier)의 목적" />
      <comment value="Applications can assume that an identifier is permanent unless it explicitly says that it is temporary." />
      <requirements value="Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.use" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="code" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isModifier value="true" />
      <isModifierReason value="This is labeled as &quot;Is Modifier&quot; because applications should not mistake a temporary id for a permanent one." />
      <isSummary value="true" />
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="IdentifierUse" />
        </extension>
        <strength value="required" />
        <description value="Identifies the purpose for this identifier, if known ." />
        <valueSet value="http://hl7.org/fhir/ValueSet/identifier-use|4.0.1" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="N/A" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="Role.code or implied by context" />
      </mapping>
    </element>
    <element id="Composition.subject.identifier.type">
      <path value="Composition.subject.identifier.type" />
      <short value="식별자(identifier)에 대한 설명" />
      <definition value="특정 목적으로 사용되는 식별자(identifier)를 결정하기 위해 사용하는 식별자(identifier)의 코드화된(coded) 유형(type)을 나타냄." />
      <comment value="This element deals only with general categories of identifiers.  It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage.   Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type." />
      <requirements value="Allows users to make use of identifiers when the identifier system is not known." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.type" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="CodeableConcept" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="IdentifierType" />
        </extension>
        <strength value="extensible" />
        <description value="A coded type for an identifier that can be used to determine which identifier to use for a specific purpose." />
        <valueSet value="http://hl7.org/fhir/ValueSet/identifier-type" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CE/CNE/CWE" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CD" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept rdfs:subClassOf dt:CD" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.5" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="Role.code or implied by context" />
      </mapping>
    </element>
    <element id="Composition.subject.identifier.type.id">
      <path value="Composition.subject.identifier.type.id" />
      <representation value="xmlAttr" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.subject.identifier.type.extension">
      <path value="Composition.subject.identifier.type.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.subject.identifier.type.coding">
      <path value="Composition.subject.identifier.type.coding" />
      <short value="용어체계(terminology system)에 의해 정의된 코드(code)" />
      <definition value="용어체계(terminology system)에 의해 정의된 코드(code) 참조" />
      <comment value="Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information.  Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true." />
      <requirements value="Allows for alternative encodings within a code system, and translations to other code systems." />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="CodeableConcept.coding" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Coding" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CE/CNE/CWE subset one of the sets of component 1-3 or 4-6" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CV" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding rdfs:subClassOf dt:CDCoding" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.1-8, C*E.10-22" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="union(., ./translation)" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding" />
      </mapping>
    </element>
    <element id="Composition.subject.identifier.type.coding.id">
      <path value="Composition.subject.identifier.type.coding.id" />
      <representation value="xmlAttr" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.subject.identifier.type.coding.extension">
      <path value="Composition.subject.identifier.type.coding.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.subject.identifier.type.coding.system">
      <path value="Composition.subject.identifier.type.coding.system" />
      <short value="용어체계 식별(Identity of terminology system)" />
      <definition value="코드(code)에서 기호(symbol)의 의미를 정의하는 CodeSystem[]를 식별" />
      <comment value="The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...).  OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously." />
      <requirements value="Need to be unambiguous about the source of the definition of the symbol." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.system" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="uri" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.3" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./codeSystem" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem" />
      </mapping>
    </element>
    <element id="Composition.subject.identifier.type.coding.version">
      <path value="Composition.subject.identifier.type.coding.version" />
      <short value="해당 시스템의 버전 정보 - 필요한 경우" />
      <definition value="해당 코드(code)를 선택한 시점에 사용된 CodeSystem[]의 버전임. 올바로 관리된 CodeSystem[]은 코드(code)의 의미가 버전과 관계없이 일관적이므로 버전을 보고할 필요가 없음. 그러나 CodeSystem[]의 관리 상태는 지속적으로 보장할 수 없는 부분이며, 코드(code)의 의미가 일관적임을 보장할 수 없는 경우 버전이 교체되어야 함." />
      <comment value="Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.version" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.7" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./codeSystemVersion" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion" />
      </mapping>
    </element>
    <element id="Composition.subject.identifier.type.coding.code">
      <path value="Composition.subject.identifier.type.coding.code" />
      <short value="시스템에 정의된 구문(syntax)의 기호(symbol)" />
      <definition value="시스템에 정의된 구문(syntax)의 기호(symbol). 기호(symbol)은 CodeSystem[]에 의해 정의된 구문에서 미리 정의된 코드(code) 또는 표현(expression)일 수 있음. (예: post-coordination)" />
      <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" />
      <requirements value="Need to refer to a particular code in the system." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.code" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="code" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.1" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./code" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code" />
      </mapping>
    </element>
    <element id="Composition.subject.identifier.type.coding.display">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="Composition.subject.identifier.type.coding.display" />
      <short value="시스템에 정의된 표기(representation)" />
      <definition value="시스템의 규칙(rules)에 따른, 시스템에서 코드(code)의 의미 표기(representation)" />
      <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" />
      <requirements value="Need to be able to carry a human-readable meaning of the code for readers that do not know  the system." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.display" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.2 - but note this is not well followed" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CV.displayName" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName" />
      </mapping>
    </element>
    <element id="Composition.subject.identifier.type.coding.userSelected">
      <path value="Composition.subject.identifier.type.coding.userSelected" />
      <short value="해당 코딩(coding)이 사용자(user)에 의해 직접(directly) 선택되었는지 여부" />
      <definition value="해당 코딩(coding)이 사용자(user)에 의해 직접 선택되었음을 나타냄 - (예) 사용가능한 항목(item)의 선택 목록(list) 중 하나 (코드 또는 디스플레이 )" />
      <comment value="Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely." />
      <requirements value="This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.userSelected" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="boolean" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="Sometimes implied by being first" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CD.codingRationale" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map;   fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [     fhir:source &quot;true&quot;;     fhir:target dt:CDCoding.codingRationale\#O   ]" />
      </mapping>
    </element>
    <element id="Composition.subject.identifier.type.text">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="Composition.subject.identifier.type.text" />
      <short value="개념(concept)에 대한 일반 텍스트 표현 (plain text representation)" />
      <definition value="데이터를 입력한 사용자(user)의 입장에서 보거나(seen)/선택하거나(selected)/언급한대로(uttered)의 개념(concept), 혹은 사용자(user)가 의도한 의미를 사람이 사용하는 언어로 표현한 것임." />
      <comment value="Very often the text is the same as a displayName of one of the codings." />
      <requirements value="The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="CodeableConcept.text" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.9. But note many systems use C*E.2 for this" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./originalText[mediaType/code=&quot;text/plain&quot;]/data" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText" />
      </mapping>
    </element>
    <element id="Composition.subject.identifier.system">
      <path value="Composition.subject.identifier.system" />
      <short value="식별자(identifier) 값의 네임스페이스(namespace)" />
      <definition value="설정 값에 대한 네임스페이스 (namespace), 즉 고유(unique)한 설정값을 설명하는 URL을 설정함." />
      <comment value="Identifier.system is always case sensitive." />
      <requirements value="There are many sets  of identifiers.  To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.system" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="uri" />
      </type>
      <example>
        <label value="General" />
        <valueUri value="http://www.acme.com/identifiers/patient" />
      </example>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.4 / EI-2-4" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="II.root or Role.id.root" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="./IdentifierType" />
      </mapping>
    </element>
    <element id="Composition.subject.identifier.value">
      <path value="Composition.subject.identifier.value" />
      <short value="고유(unique)한 값(value)" />
      <definition value="일반적으로 사용자(user)와 관련(relevant)이 있으며, 시스템 컨텍스트(context) 내에서 고유(unique)한 식별자(identifier)의 일부분임." />
      <comment value="If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986.  The value's primary purpose is computational mapping.  As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.)  A value formatted for human display can be conveyed using the [Rendered Value extension](extension-rendered-value.html). Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.value" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <example>
        <label value="General" />
        <valueString value="123456" />
      </example>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.1 / EI.1" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root)" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="./Value" />
      </mapping>
    </element>
    <element id="Composition.subject.identifier.period">
      <path value="Composition.subject.identifier.period" />
      <short value="식별자(identifier)의 유효 기간" />
      <definition value="식별자(identifier)가 사용 가능했거나 가능한 기간을 나타냄." />
      <comment value="A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. &quot;the patient was an inpatient of the hospital for this time range&quot;) or one value from the range applies (e.g. &quot;give to the patient between these two times&quot;).&#xA;&#xA;Period is not used for a duration (a measure of elapsed time). See [Duration](datatypes.html#Duration)." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.period" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="Period" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="per-1" />
        <severity value="error" />
        <human value="If present, start SHALL have a lower value than end" />
        <expression value="start.hasValue().not() or end.hasValue().not() or (start &lt;= end)" />
        <xpath value="not(exists(f:start/@value)) or not(exists(f:end/@value)) or (xs:dateTime(f:start/@value) &lt;= xs:dateTime(f:end/@value))" />
        <source value="http://hl7.org/fhir/StructureDefinition/Period" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="DR" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="IVL&lt;TS&gt;[lowClosed=&quot;true&quot; and highClosed=&quot;true&quot;] or URG&lt;TS&gt;[lowClosed=&quot;true&quot; and highClosed=&quot;true&quot;]" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.7 + CX.8" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="Role.effectiveTime or implied by context" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="./StartDate and ./EndDate" />
      </mapping>
    </element>
    <element id="Composition.subject.identifier.period.id">
      <path value="Composition.subject.identifier.period.id" />
      <representation value="xmlAttr" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.subject.identifier.period.extension">
      <path value="Composition.subject.identifier.period.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.subject.identifier.period.start">
      <path value="Composition.subject.identifier.period.start" />
      <short value="해당 유효 기간의 시작 시점 (설정된 날짜 포함)" />
      <definition value="해당 유효 기간이 시작되는 시점을 나타냄. 유효 기간은 시작 시점으로 설정된 날짜를 포함함." />
      <comment value="If the low element is missing, the meaning is that the low boundary is not known." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Period.start" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="dateTime" />
      </type>
      <condition value="ele-1" />
      <condition value="per-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="DR.1" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./low" />
      </mapping>
    </element>
    <element id="Composition.subject.identifier.period.end">
      <path value="Composition.subject.identifier.period.end" />
      <short value="해당 유효 기간의 종료 시점 (설정된 날짜 포함)" />
      <definition value="기간의 종료. 기간의 종료가 누락된 경우, 인스턴스가 생성될 때 끝이 알려지거나 계획되지 않았음을 의미함. 시작일은 과거일 수 있고 종료일은 미래일 수 있음. 이는 해당 기간이 해당 시간에 종료될 예정임을 의미함" />
      <comment value="The high value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has an end value of 2012-02-03." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Period.end" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="dateTime" />
      </type>
      <meaningWhenMissing value="If the end of the period is missing, it means that the period is ongoing" />
      <condition value="ele-1" />
      <condition value="per-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="DR.2" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./high" />
      </mapping>
    </element>
    <element id="Composition.subject.identifier.assigner">
      <path value="Composition.subject.identifier.assigner" />
      <short value="식별자(identifier)를 발급한 조직(단순 텍스트 기입 가능)" />
      <definition value="식별자(identifier)를 발급/관리하는 조직(organization)" />
      <comment value="The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.assigner" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="Reference" />
        <targetProfile value="http://hl7.org/fhir/StructureDefinition/Organization" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ref-1" />
        <severity value="error" />
        <human value="SHALL have a contained resource if a local reference is provided" />
        <expression value="reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))" />
        <xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Reference" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.4 / (CX.4,CX.9,CX.10)" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="II.assigningAuthorityName but note that this is an improper use by the definition of the field.  Also Role.scoper" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="./IdentifierIssuingAuthority" />
      </mapping>
    </element>
    <element id="Composition.subject.display">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="Composition.subject.display" />
      <short value="해당 리소스(resource)에 대한 대체 텍스트(alternative text)" />
      <definition value="리소스(resource) 참조 외에도 리소스(resource)를 식별하기 위한 일반 텍스트 설명임." />
      <comment value="This is generally not the same as the Resource.text of the referenced resource.  The purpose is to identify what's being referenced, not to fully describe it." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Reference.display" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.encounter">
      <path value="Composition.encounter" />
      <short value="구성요소(composition)의 맥락이되는 이벤트" />
      <definition value="해당 문서와 관련된 임상적 이벤트 혹은 치료 유형에 대한 설명" />
      <comment value="참조(reference)는 실제 FHIR 리소스(resource)에 대한 참조(reference)여야 하며, 해결이 가능해야 함 (접근 제어 허용, 일시적인 사용 불가능 등). 해결 방법은 URL에서 검색하거나, 리소스 타입(resource type)별로 적용할 수 있는 경우 절대 참조를 표준(Canonical) URL로 간주하고 로컬 레지스트리/저장소에서 검색하여 확인할 수 있음." />
      <requirements value="Provides context for the composition and supports searching." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Composition.encounter" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="Reference" />
        <targetProfile value="http://hl7.org/fhir/StructureDefinition/Encounter" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ref-1" />
        <severity value="error" />
        <human value="SHALL have a contained resource if a local reference is provided" />
        <expression value="reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))" />
        <xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Reference" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" />
      </mapping>
      <mapping>
        <identity value="workflow" />
        <map value="Event.context" />
      </mapping>
      <mapping>
        <identity value="w5" />
        <map value="FiveWs.context" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="unique(highest(./outboundRelationship[typeCode=&quot;SUBJ&quot; and isNormalActRelationship()], priorityNumber)/target[moodCode=&quot;EVN&quot; and classCode=(&quot;ENC&quot;, &quot;PCPR&quot;) and isNormalAct])" />
      </mapping>
      <mapping>
        <identity value="cda" />
        <map value=".componentOf.encompassingEncounter" />
      </mapping>
      <mapping>
        <identity value="fhirdocumentreference" />
        <map value="DocumentReference.context.encounter" />
      </mapping>
    </element>
    <element id="Composition.encounter.id">
      <path value="Composition.encounter.id" />
      <representation value="xmlAttr" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.encounter.extension">
      <path value="Composition.encounter.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.encounter.reference">
      <path value="Composition.encounter.reference" />
      <short value="문자로 표현된(literal) 참조, 상대적, 내부적 혹은 절대적인 URL" />
      <definition value="다른 리소스(resource)를 찾을 수 있는 위치에 대한 참조를 의미함. 해당 참조는 service base URL에 상대적인(relative) 경우 상대적 참조, 혹은 해당 리소스(resource)를 찾을 수 있는 위치인 절대(absolute) URL일 수 있음. 해당 참조는 버전에 따라 다를 수 있음. 해당 참조가 FHIR RESTful 서버가 아닌 경우, 버전에 따라 다른 것으로 간주함. 내부 구문(Internal Fragment) 참조('#'으로 시작)는 포함되어 있는 리소스(resource)를 참조함." />
      <comment value="Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries.   Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure &quot;/[type]/[id]&quot; then it should be assumed that the reference is to a FHIR RESTful server." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Reference.reference" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <condition value="ref-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.encounter.type">
      <path value="Composition.encounter.type" />
      <short value="참조(reference)가 참조(refer)하는 유형(type)  (예. &quot;Patient&quot;)" />
      <definition value="참조 대상의 예상 형식(expected type).  Reference.type과 Reference.reference가 모두 채워지고 Reference.reference가 FHIR URL이면 두가지 모두 일치해야함. 유형(type)은이 참조가 참조하는 유형(type) 인 리소스(resource) 정의의 표준(Canonical) URL임. 참조는 http://hl7.org/fhir/StructureDefinition/과 관련된 URL임. (예) &quot; 환자 &quot; http://hl7.org/fhir/StructureDefinition/Patient에 대한 참조. 절대(absolute) URL은 논리 모델에만 허용됨 (리소스(resource)가 아닌 논리 모델의 참조에서만 사용할 수 있음)." />
      <comment value="This element is used to indicate the type of  the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Reference.type" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="uri" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="FHIRResourceTypeExt" />
        </extension>
        <strength value="extensible" />
        <description value="Aa resource (or, for logical models, the URI of the logical model)." />
        <valueSet value="http://hl7.org/fhir/ValueSet/resource-types" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.encounter.identifier">
      <path value="Composition.encounter.identifier" />
      <short value="문자로 표현된(literal) 참조를 알 수 없는 경우 사용하는, 논리적(logical) 참조" />
      <definition value="대상 리소스(resource)의 식별자(identifier). 이것은 다른 리소스(resource)를 직접 참조할 방법이 없을 때 사용- 해당 엔티티(entity)가 FHIR 서버를 통해 사용할 수 없거나  리소스(resource) 작성자가 알려진 식별자(identifier)를 실제 위치로 변활할 방법이 없기 때문에 이 방법이 사용됨. Reference.identifier가 실제로 FHIR 인스턴스로 노출되는 것을 가리킬(point) 필요는 없지만, FHIR 인스턴스로 노출될 것으로 예상되는 비즈니스 개념(concept)을 가리켜야하며, 해당 인스턴스는 참조가 허용되는 FHIR 리소스 타입(resource type)이여야 함." />
      <comment value="When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. &#xA;&#xA;When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference&#xA;&#xA;Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.&#xA;&#xA;Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference.  For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport).  One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any)." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Reference.identifier" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="Identifier" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX / EI (occasionally, more often EI maps to a resource id or a URL)" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs.  Also maps to Role[classCode=IDENT]" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="Identifier" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value=".identifier" />
      </mapping>
    </element>
    <element id="Composition.encounter.identifier.id">
      <path value="Composition.encounter.identifier.id" />
      <representation value="xmlAttr" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.encounter.identifier.extension">
      <path value="Composition.encounter.identifier.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.encounter.identifier.use">
      <path value="Composition.encounter.identifier.use" />
      <short value="usual | official | temp | secondary | old (If known)" />
      <definition value="해당 식별자(identifier)의 목적" />
      <comment value="Applications can assume that an identifier is permanent unless it explicitly says that it is temporary." />
      <requirements value="Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.use" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="code" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isModifier value="true" />
      <isModifierReason value="This is labeled as &quot;Is Modifier&quot; because applications should not mistake a temporary id for a permanent one." />
      <isSummary value="true" />
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="IdentifierUse" />
        </extension>
        <strength value="required" />
        <description value="Identifies the purpose for this identifier, if known ." />
        <valueSet value="http://hl7.org/fhir/ValueSet/identifier-use|4.0.1" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="N/A" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="Role.code or implied by context" />
      </mapping>
    </element>
    <element id="Composition.encounter.identifier.type">
      <path value="Composition.encounter.identifier.type" />
      <short value="식별자(identifier)에 대한 설명" />
      <definition value="특정 목적으로 사용되는 식별자(identifier)를 결정하기 위해 사용하는 식별자(identifier)의 코드화된(coded) 유형(type)을 나타냄." />
      <comment value="This element deals only with general categories of identifiers.  It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage.   Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type." />
      <requirements value="Allows users to make use of identifiers when the identifier system is not known." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.type" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="CodeableConcept" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="IdentifierType" />
        </extension>
        <strength value="extensible" />
        <description value="A coded type for an identifier that can be used to determine which identifier to use for a specific purpose." />
        <valueSet value="http://hl7.org/fhir/ValueSet/identifier-type" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CE/CNE/CWE" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CD" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept rdfs:subClassOf dt:CD" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.5" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="Role.code or implied by context" />
      </mapping>
    </element>
    <element id="Composition.encounter.identifier.type.id">
      <path value="Composition.encounter.identifier.type.id" />
      <representation value="xmlAttr" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.encounter.identifier.type.extension">
      <path value="Composition.encounter.identifier.type.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.encounter.identifier.type.coding">
      <path value="Composition.encounter.identifier.type.coding" />
      <short value="용어체계(terminology system)에 의해 정의된 코드(code)" />
      <definition value="용어체계(terminology system)에 의해 정의된 코드(code) 참조" />
      <comment value="Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information.  Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true." />
      <requirements value="Allows for alternative encodings within a code system, and translations to other code systems." />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="CodeableConcept.coding" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Coding" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CE/CNE/CWE subset one of the sets of component 1-3 or 4-6" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CV" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding rdfs:subClassOf dt:CDCoding" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.1-8, C*E.10-22" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="union(., ./translation)" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding" />
      </mapping>
    </element>
    <element id="Composition.encounter.identifier.type.coding.id">
      <path value="Composition.encounter.identifier.type.coding.id" />
      <representation value="xmlAttr" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.encounter.identifier.type.coding.extension">
      <path value="Composition.encounter.identifier.type.coding.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.encounter.identifier.type.coding.system">
      <path value="Composition.encounter.identifier.type.coding.system" />
      <short value="용어체계 식별(Identity of terminology system)" />
      <definition value="코드(code)에서 기호(symbol)의 의미를 정의하는 CodeSystem[]를 식별" />
      <comment value="The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...).  OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously." />
      <requirements value="Need to be unambiguous about the source of the definition of the symbol." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.system" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="uri" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.3" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./codeSystem" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem" />
      </mapping>
    </element>
    <element id="Composition.encounter.identifier.type.coding.version">
      <path value="Composition.encounter.identifier.type.coding.version" />
      <short value="해당 시스템의 버전 정보 - 필요한 경우" />
      <definition value="해당 코드(code)를 선택한 시점에 사용된 CodeSystem[]의 버전임. 올바로 관리된 CodeSystem[]은 코드(code)의 의미가 버전과 관계없이 일관적이므로 버전을 보고할 필요가 없음. 그러나 CodeSystem[]의 관리 상태는 지속적으로 보장할 수 없는 부분이며, 코드(code)의 의미가 일관적임을 보장할 수 없는 경우 버전이 교체되어야 함." />
      <comment value="Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.version" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.7" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./codeSystemVersion" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion" />
      </mapping>
    </element>
    <element id="Composition.encounter.identifier.type.coding.code">
      <path value="Composition.encounter.identifier.type.coding.code" />
      <short value="시스템에 정의된 구문(syntax)의 기호(symbol)" />
      <definition value="시스템에 정의된 구문(syntax)의 기호(symbol). 기호(symbol)은 CodeSystem[]에 의해 정의된 구문에서 미리 정의된 코드(code) 또는 표현(expression)일 수 있음. (예: post-coordination)" />
      <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" />
      <requirements value="Need to refer to a particular code in the system." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.code" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="code" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.1" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./code" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code" />
      </mapping>
    </element>
    <element id="Composition.encounter.identifier.type.coding.display">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="Composition.encounter.identifier.type.coding.display" />
      <short value="시스템에 정의된 표기(representation)" />
      <definition value="시스템의 규칙(rules)에 따른, 시스템에서 코드(code)의 의미 표기(representation)" />
      <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" />
      <requirements value="Need to be able to carry a human-readable meaning of the code for readers that do not know  the system." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.display" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.2 - but note this is not well followed" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CV.displayName" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName" />
      </mapping>
    </element>
    <element id="Composition.encounter.identifier.type.coding.userSelected">
      <path value="Composition.encounter.identifier.type.coding.userSelected" />
      <short value="해당 코딩(coding)이 사용자(user)에 의해 직접(directly) 선택되었는지 여부" />
      <definition value="해당 코딩(coding)이 사용자(user)에 의해 직접 선택되었음을 나타냄 - (예) 사용가능한 항목(item)의 선택 목록(list) 중 하나 (코드 또는 디스플레이 )" />
      <comment value="Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely." />
      <requirements value="This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.userSelected" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="boolean" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="Sometimes implied by being first" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CD.codingRationale" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map;   fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [     fhir:source &quot;true&quot;;     fhir:target dt:CDCoding.codingRationale\#O   ]" />
      </mapping>
    </element>
    <element id="Composition.encounter.identifier.type.text">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="Composition.encounter.identifier.type.text" />
      <short value="개념(concept)에 대한 일반 텍스트 표현 (plain text representation)" />
      <definition value="데이터를 입력한 사용자(user)의 입장에서 보거나(seen)/선택하거나(selected)/언급한대로(uttered)의 개념(concept), 혹은 사용자(user)가 의도한 의미를 사람이 사용하는 언어로 표현한 것임." />
      <comment value="Very often the text is the same as a displayName of one of the codings." />
      <requirements value="The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="CodeableConcept.text" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.9. But note many systems use C*E.2 for this" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./originalText[mediaType/code=&quot;text/plain&quot;]/data" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText" />
      </mapping>
    </element>
    <element id="Composition.encounter.identifier.system">
      <path value="Composition.encounter.identifier.system" />
      <short value="식별자(identifier) 값의 네임스페이스(namespace)" />
      <definition value="설정 값에 대한 네임스페이스 (namespace), 즉 고유(unique)한 설정값을 설명하는 URL을 설정함." />
      <comment value="Identifier.system is always case sensitive." />
      <requirements value="There are many sets  of identifiers.  To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.system" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="uri" />
      </type>
      <example>
        <label value="General" />
        <valueUri value="http://www.acme.com/identifiers/patient" />
      </example>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.4 / EI-2-4" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="II.root or Role.id.root" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="./IdentifierType" />
      </mapping>
    </element>
    <element id="Composition.encounter.identifier.value">
      <path value="Composition.encounter.identifier.value" />
      <short value="고유(unique)한 값(value)" />
      <definition value="일반적으로 사용자(user)와 관련(relevant)이 있으며, 시스템 컨텍스트(context) 내에서 고유(unique)한 식별자(identifier)의 일부분임." />
      <comment value="If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986.  The value's primary purpose is computational mapping.  As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.)  A value formatted for human display can be conveyed using the [Rendered Value extension](extension-rendered-value.html). Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.value" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <example>
        <label value="General" />
        <valueString value="123456" />
      </example>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.1 / EI.1" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root)" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="./Value" />
      </mapping>
    </element>
    <element id="Composition.encounter.identifier.period">
      <path value="Composition.encounter.identifier.period" />
      <short value="식별자(identifier)의 유효 기간" />
      <definition value="식별자(identifier)가 사용 가능했거나 가능한 기간을 나타냄." />
      <comment value="A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. &quot;the patient was an inpatient of the hospital for this time range&quot;) or one value from the range applies (e.g. &quot;give to the patient between these two times&quot;).&#xA;&#xA;Period is not used for a duration (a measure of elapsed time). See [Duration](datatypes.html#Duration)." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.period" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="Period" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="per-1" />
        <severity value="error" />
        <human value="If present, start SHALL have a lower value than end" />
        <expression value="start.hasValue().not() or end.hasValue().not() or (start &lt;= end)" />
        <xpath value="not(exists(f:start/@value)) or not(exists(f:end/@value)) or (xs:dateTime(f:start/@value) &lt;= xs:dateTime(f:end/@value))" />
        <source value="http://hl7.org/fhir/StructureDefinition/Period" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="DR" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="IVL&lt;TS&gt;[lowClosed=&quot;true&quot; and highClosed=&quot;true&quot;] or URG&lt;TS&gt;[lowClosed=&quot;true&quot; and highClosed=&quot;true&quot;]" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.7 + CX.8" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="Role.effectiveTime or implied by context" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="./StartDate and ./EndDate" />
      </mapping>
    </element>
    <element id="Composition.encounter.identifier.period.id">
      <path value="Composition.encounter.identifier.period.id" />
      <representation value="xmlAttr" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.encounter.identifier.period.extension">
      <path value="Composition.encounter.identifier.period.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.encounter.identifier.period.start">
      <path value="Composition.encounter.identifier.period.start" />
      <short value="해당 유효 기간의 시작 시점 (설정된 날짜 포함)" />
      <definition value="해당 유효 기간이 시작되는 시점을 나타냄. 유효 기간은 시작 시점으로 설정된 날짜를 포함함." />
      <comment value="If the low element is missing, the meaning is that the low boundary is not known." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Period.start" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="dateTime" />
      </type>
      <condition value="ele-1" />
      <condition value="per-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="DR.1" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./low" />
      </mapping>
    </element>
    <element id="Composition.encounter.identifier.period.end">
      <path value="Composition.encounter.identifier.period.end" />
      <short value="해당 유효 기간의 종료 시점 (설정된 날짜 포함)" />
      <definition value="기간의 종료. 기간의 종료가 누락된 경우, 인스턴스가 생성될 때 끝이 알려지거나 계획되지 않았음을 의미함. 시작일은 과거일 수 있고 종료일은 미래일 수 있음. 이는 해당 기간이 해당 시간에 종료될 예정임을 의미함" />
      <comment value="The high value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has an end value of 2012-02-03." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Period.end" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="dateTime" />
      </type>
      <meaningWhenMissing value="If the end of the period is missing, it means that the period is ongoing" />
      <condition value="ele-1" />
      <condition value="per-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="DR.2" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./high" />
      </mapping>
    </element>
    <element id="Composition.encounter.identifier.assigner">
      <path value="Composition.encounter.identifier.assigner" />
      <short value="식별자(identifier)를 발급한 조직(단순 텍스트 기입 가능)" />
      <definition value="식별자(identifier)를 발급/관리하는 조직(organization)" />
      <comment value="The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.assigner" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="Reference" />
        <targetProfile value="http://hl7.org/fhir/StructureDefinition/Organization" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ref-1" />
        <severity value="error" />
        <human value="SHALL have a contained resource if a local reference is provided" />
        <expression value="reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))" />
        <xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Reference" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.4 / (CX.4,CX.9,CX.10)" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="II.assigningAuthorityName but note that this is an improper use by the definition of the field.  Also Role.scoper" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="./IdentifierIssuingAuthority" />
      </mapping>
    </element>
    <element id="Composition.encounter.display">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="Composition.encounter.display" />
      <short value="해당 리소스(resource)에 대한 대체 텍스트(alternative text)" />
      <definition value="리소스(resource) 참조 외에도 리소스(resource)를 식별하기 위한 일반 텍스트 설명임." />
      <comment value="This is generally not the same as the Resource.text of the referenced resource.  The purpose is to identify what's being referenced, not to fully describe it." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Reference.display" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.date">
      <path value="Composition.date" />
      <short value="구성요소(composition)가 수정된 시간" />
      <definition value="작성자가 구성요소(composition)를 마지막으로 수정한 시간을 의미함." />
      <comment value="구성요소(composition)의 마지막 수정일은 변경없고 증명된 문서의 날짜 이후 일 수 있음" />
      <requirements value="dateTime is used for tracking, organizing versions and searching. Note that this is the time of *authoring*. When packaged in a document, [Bundle.timestamp](bundle-definitions.html#Bundle.timestamp) is the date of packaging." />
      <min value="1" />
      <max value="1" />
      <base>
        <path value="Composition.date" />
        <min value="1" />
        <max value="1" />
      </base>
      <type>
        <code value="dateTime" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="workflow" />
        <map value="Event.occurrence[x]" />
      </mapping>
      <mapping>
        <identity value="w5" />
        <map value="FiveWs.done[x]" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value=".effectiveTime[type=&quot;TS&quot;]" />
      </mapping>
      <mapping>
        <identity value="cda" />
        <map value=".effectiveTime" />
      </mapping>
      <mapping>
        <identity value="fhirdocumentreference" />
        <map value="DocumentReference.content.attachment.date, DocumentReference.created" />
      </mapping>
    </element>
    <element id="Composition.author">
      <path value="Composition.author" />
      <short value="누가 그리고 무슨 구성(composition)을 작성했는지" />
      <definition value="구성요소(composition)의 정보를 책임지는 주체를 식별함." />
      <comment value="참조(reference)는 실제 FHIR 리소스(resource)에 대한 참조(reference)여야 하며, 해결이 가능해야 함 (접근 제어 허용, 일시적인 사용 불가능 등). 해결 방법은 URL에서 검색하거나, 리소스 타입(resource type)별로 적용할 수 있는 경우 절대 참조를 표준(Canonical) URL로 간주하고 로컬 레지스트리/저장소에서 검색하여 확인할 수 있음." />
      <requirements value="Identifies who is responsible for the content." />
      <min value="1" />
      <max value="*" />
      <base>
        <path value="Composition.author" />
        <min value="1" />
        <max value="*" />
      </base>
      <type>
        <code value="Reference" />
        <targetProfile value="http://hl7.org/fhir/StructureDefinition/Practitioner" />
        <targetProfile value="http://hl7.org/fhir/StructureDefinition/PractitionerRole" />
        <targetProfile value="http://hl7.org/fhir/StructureDefinition/Device" />
        <targetProfile value="http://hl7.org/fhir/StructureDefinition/Patient" />
        <targetProfile value="http://hl7.org/fhir/StructureDefinition/RelatedPerson" />
        <targetProfile value="http://hl7.org/fhir/StructureDefinition/Organization" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ref-1" />
        <severity value="error" />
        <human value="SHALL have a contained resource if a local reference is provided" />
        <expression value="reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))" />
        <xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Reference" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" />
      </mapping>
      <mapping>
        <identity value="workflow" />
        <map value="Event.performer" />
      </mapping>
      <mapping>
        <identity value="w5" />
        <map value="FiveWs.author" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value=".participation[typeCode=&quot;AUT&quot;].role[classCode=&quot;ASSIGNED&quot;]" />
      </mapping>
      <mapping>
        <identity value="cda" />
        <map value=".author.assignedAuthor" />
      </mapping>
      <mapping>
        <identity value="fhirdocumentreference" />
        <map value="DocumentReference.agent" />
      </mapping>
    </element>
    <element id="Composition.author.id">
      <path value="Composition.author.id" />
      <representation value="xmlAttr" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.author.extension">
      <path value="Composition.author.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.author.reference">
      <path value="Composition.author.reference" />
      <short value="문자로 표현된(literal) 참조, 상대적, 내부적 혹은 절대적인 URL" />
      <definition value="다른 리소스(resource)를 찾을 수 있는 위치에 대한 참조를 의미함. 해당 참조는 service base URL에 상대적인(relative) 경우 상대적 참조, 혹은 해당 리소스(resource)를 찾을 수 있는 위치인 절대(absolute) URL일 수 있음. 해당 참조는 버전에 따라 다를 수 있음. 해당 참조가 FHIR RESTful 서버가 아닌 경우, 버전에 따라 다른 것으로 간주함. 내부 구문(Internal Fragment) 참조('#'으로 시작)는 포함되어 있는 리소스(resource)를 참조함." />
      <comment value="Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries.   Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure &quot;/[type]/[id]&quot; then it should be assumed that the reference is to a FHIR RESTful server." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Reference.reference" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <condition value="ref-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.author.type">
      <path value="Composition.author.type" />
      <short value="참조(reference)가 참조(refer)하는 유형(type)  (예. &quot;Patient&quot;)" />
      <definition value="참조 대상의 예상 형식(expected type).  Reference.type과 Reference.reference가 모두 채워지고 Reference.reference가 FHIR URL이면 두가지 모두 일치해야함. 유형(type)은이 참조가 참조하는 유형(type) 인 리소스(resource) 정의의 표준(Canonical) URL임. 참조는 http://hl7.org/fhir/StructureDefinition/과 관련된 URL임. (예) &quot; 환자 &quot; http://hl7.org/fhir/StructureDefinition/Patient에 대한 참조. 절대(absolute) URL은 논리 모델에만 허용됨 (리소스(resource)가 아닌 논리 모델의 참조에서만 사용할 수 있음)." />
      <comment value="This element is used to indicate the type of  the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Reference.type" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="uri" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="FHIRResourceTypeExt" />
        </extension>
        <strength value="extensible" />
        <description value="Aa resource (or, for logical models, the URI of the logical model)." />
        <valueSet value="http://hl7.org/fhir/ValueSet/resource-types" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.author.identifier">
      <path value="Composition.author.identifier" />
      <short value="문자로 표현된(literal) 참조를 알 수 없는 경우 사용하는, 논리적(logical) 참조" />
      <definition value="대상 리소스(resource)의 식별자(identifier). 이것은 다른 리소스(resource)를 직접 참조할 방법이 없을 때 사용- 해당 엔티티(entity)가 FHIR 서버를 통해 사용할 수 없거나  리소스(resource) 작성자가 알려진 식별자(identifier)를 실제 위치로 변활할 방법이 없기 때문에 이 방법이 사용됨. Reference.identifier가 실제로 FHIR 인스턴스로 노출되는 것을 가리킬(point) 필요는 없지만, FHIR 인스턴스로 노출될 것으로 예상되는 비즈니스 개념(concept)을 가리켜야하며, 해당 인스턴스는 참조가 허용되는 FHIR 리소스 타입(resource type)이여야 함." />
      <comment value="When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. &#xA;&#xA;When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference&#xA;&#xA;Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.&#xA;&#xA;Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference.  For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport).  One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any)." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Reference.identifier" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="Identifier" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX / EI (occasionally, more often EI maps to a resource id or a URL)" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs.  Also maps to Role[classCode=IDENT]" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="Identifier" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value=".identifier" />
      </mapping>
    </element>
    <element id="Composition.author.identifier.id">
      <path value="Composition.author.identifier.id" />
      <representation value="xmlAttr" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.author.identifier.extension">
      <path value="Composition.author.identifier.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.author.identifier.use">
      <path value="Composition.author.identifier.use" />
      <short value="usual | official | temp | secondary | old (If known)" />
      <definition value="해당 식별자(identifier)의 목적" />
      <comment value="Applications can assume that an identifier is permanent unless it explicitly says that it is temporary." />
      <requirements value="Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.use" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="code" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isModifier value="true" />
      <isModifierReason value="This is labeled as &quot;Is Modifier&quot; because applications should not mistake a temporary id for a permanent one." />
      <isSummary value="true" />
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="IdentifierUse" />
        </extension>
        <strength value="required" />
        <description value="Identifies the purpose for this identifier, if known ." />
        <valueSet value="http://hl7.org/fhir/ValueSet/identifier-use|4.0.1" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="N/A" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="Role.code or implied by context" />
      </mapping>
    </element>
    <element id="Composition.author.identifier.type">
      <path value="Composition.author.identifier.type" />
      <short value="식별자(identifier)에 대한 설명" />
      <definition value="특정 목적으로 사용되는 식별자(identifier)를 결정하기 위해 사용하는 식별자(identifier)의 코드화된(coded) 유형(type)을 나타냄." />
      <comment value="This element deals only with general categories of identifiers.  It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage.   Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type." />
      <requirements value="Allows users to make use of identifiers when the identifier system is not known." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.type" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="CodeableConcept" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="IdentifierType" />
        </extension>
        <strength value="extensible" />
        <description value="A coded type for an identifier that can be used to determine which identifier to use for a specific purpose." />
        <valueSet value="http://hl7.org/fhir/ValueSet/identifier-type" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CE/CNE/CWE" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CD" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept rdfs:subClassOf dt:CD" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.5" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="Role.code or implied by context" />
      </mapping>
    </element>
    <element id="Composition.author.identifier.type.id">
      <path value="Composition.author.identifier.type.id" />
      <representation value="xmlAttr" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.author.identifier.type.extension">
      <path value="Composition.author.identifier.type.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.author.identifier.type.coding">
      <path value="Composition.author.identifier.type.coding" />
      <short value="용어체계(terminology system)에 의해 정의된 코드(code)" />
      <definition value="용어체계(terminology system)에 의해 정의된 코드(code) 참조" />
      <comment value="Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information.  Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true." />
      <requirements value="Allows for alternative encodings within a code system, and translations to other code systems." />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="CodeableConcept.coding" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Coding" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CE/CNE/CWE subset one of the sets of component 1-3 or 4-6" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CV" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding rdfs:subClassOf dt:CDCoding" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.1-8, C*E.10-22" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="union(., ./translation)" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding" />
      </mapping>
    </element>
    <element id="Composition.author.identifier.type.coding.id">
      <path value="Composition.author.identifier.type.coding.id" />
      <representation value="xmlAttr" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.author.identifier.type.coding.extension">
      <path value="Composition.author.identifier.type.coding.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.author.identifier.type.coding.system">
      <path value="Composition.author.identifier.type.coding.system" />
      <short value="용어체계 식별(Identity of terminology system)" />
      <definition value="코드(code)에서 기호(symbol)의 의미를 정의하는 CodeSystem[]를 식별" />
      <comment value="The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...).  OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously." />
      <requirements value="Need to be unambiguous about the source of the definition of the symbol." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.system" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="uri" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.3" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./codeSystem" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem" />
      </mapping>
    </element>
    <element id="Composition.author.identifier.type.coding.version">
      <path value="Composition.author.identifier.type.coding.version" />
      <short value="해당 시스템의 버전 정보 - 필요한 경우" />
      <definition value="해당 코드(code)를 선택한 시점에 사용된 CodeSystem[]의 버전임. 올바로 관리된 CodeSystem[]은 코드(code)의 의미가 버전과 관계없이 일관적이므로 버전을 보고할 필요가 없음. 그러나 CodeSystem[]의 관리 상태는 지속적으로 보장할 수 없는 부분이며, 코드(code)의 의미가 일관적임을 보장할 수 없는 경우 버전이 교체되어야 함." />
      <comment value="Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.version" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.7" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./codeSystemVersion" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion" />
      </mapping>
    </element>
    <element id="Composition.author.identifier.type.coding.code">
      <path value="Composition.author.identifier.type.coding.code" />
      <short value="시스템에 정의된 구문(syntax)의 기호(symbol)" />
      <definition value="시스템에 정의된 구문(syntax)의 기호(symbol). 기호(symbol)은 CodeSystem[]에 의해 정의된 구문에서 미리 정의된 코드(code) 또는 표현(expression)일 수 있음. (예: post-coordination)" />
      <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" />
      <requirements value="Need to refer to a particular code in the system." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.code" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="code" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.1" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./code" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code" />
      </mapping>
    </element>
    <element id="Composition.author.identifier.type.coding.display">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="Composition.author.identifier.type.coding.display" />
      <short value="시스템에 정의된 표기(representation)" />
      <definition value="시스템의 규칙(rules)에 따른, 시스템에서 코드(code)의 의미 표기(representation)" />
      <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" />
      <requirements value="Need to be able to carry a human-readable meaning of the code for readers that do not know  the system." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.display" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.2 - but note this is not well followed" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CV.displayName" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName" />
      </mapping>
    </element>
    <element id="Composition.author.identifier.type.coding.userSelected">
      <path value="Composition.author.identifier.type.coding.userSelected" />
      <short value="해당 코딩(coding)이 사용자(user)에 의해 직접(directly) 선택되었는지 여부" />
      <definition value="해당 코딩(coding)이 사용자(user)에 의해 직접 선택되었음을 나타냄 - (예) 사용가능한 항목(item)의 선택 목록(list) 중 하나 (코드 또는 디스플레이 )" />
      <comment value="Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely." />
      <requirements value="This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.userSelected" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="boolean" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="Sometimes implied by being first" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CD.codingRationale" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map;   fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [     fhir:source &quot;true&quot;;     fhir:target dt:CDCoding.codingRationale\#O   ]" />
      </mapping>
    </element>
    <element id="Composition.author.identifier.type.text">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="Composition.author.identifier.type.text" />
      <short value="개념(concept)에 대한 일반 텍스트 표현 (plain text representation)" />
      <definition value="데이터를 입력한 사용자(user)의 입장에서 보거나(seen)/선택하거나(selected)/언급한대로(uttered)의 개념(concept), 혹은 사용자(user)가 의도한 의미를 사람이 사용하는 언어로 표현한 것임." />
      <comment value="Very often the text is the same as a displayName of one of the codings." />
      <requirements value="The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="CodeableConcept.text" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.9. But note many systems use C*E.2 for this" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./originalText[mediaType/code=&quot;text/plain&quot;]/data" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText" />
      </mapping>
    </element>
    <element id="Composition.author.identifier.system">
      <path value="Composition.author.identifier.system" />
      <short value="식별자(identifier) 값의 네임스페이스(namespace)" />
      <definition value="설정 값에 대한 네임스페이스 (namespace), 즉 고유(unique)한 설정값을 설명하는 URL을 설정함." />
      <comment value="Identifier.system is always case sensitive." />
      <requirements value="There are many sets  of identifiers.  To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.system" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="uri" />
      </type>
      <example>
        <label value="General" />
        <valueUri value="http://www.acme.com/identifiers/patient" />
      </example>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.4 / EI-2-4" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="II.root or Role.id.root" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="./IdentifierType" />
      </mapping>
    </element>
    <element id="Composition.author.identifier.value">
      <path value="Composition.author.identifier.value" />
      <short value="고유(unique)한 값(value)" />
      <definition value="일반적으로 사용자(user)와 관련(relevant)이 있으며, 시스템 컨텍스트(context) 내에서 고유(unique)한 식별자(identifier)의 일부분임." />
      <comment value="If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986.  The value's primary purpose is computational mapping.  As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.)  A value formatted for human display can be conveyed using the [Rendered Value extension](extension-rendered-value.html). Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.value" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <example>
        <label value="General" />
        <valueString value="123456" />
      </example>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.1 / EI.1" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root)" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="./Value" />
      </mapping>
    </element>
    <element id="Composition.author.identifier.period">
      <path value="Composition.author.identifier.period" />
      <short value="식별자(identifier)의 유효 기간" />
      <definition value="식별자(identifier)가 사용 가능했거나 가능한 기간을 나타냄." />
      <comment value="A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. &quot;the patient was an inpatient of the hospital for this time range&quot;) or one value from the range applies (e.g. &quot;give to the patient between these two times&quot;).&#xA;&#xA;Period is not used for a duration (a measure of elapsed time). See [Duration](datatypes.html#Duration)." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.period" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="Period" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="per-1" />
        <severity value="error" />
        <human value="If present, start SHALL have a lower value than end" />
        <expression value="start.hasValue().not() or end.hasValue().not() or (start &lt;= end)" />
        <xpath value="not(exists(f:start/@value)) or not(exists(f:end/@value)) or (xs:dateTime(f:start/@value) &lt;= xs:dateTime(f:end/@value))" />
        <source value="http://hl7.org/fhir/StructureDefinition/Period" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="DR" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="IVL&lt;TS&gt;[lowClosed=&quot;true&quot; and highClosed=&quot;true&quot;] or URG&lt;TS&gt;[lowClosed=&quot;true&quot; and highClosed=&quot;true&quot;]" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.7 + CX.8" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="Role.effectiveTime or implied by context" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="./StartDate and ./EndDate" />
      </mapping>
    </element>
    <element id="Composition.author.identifier.period.id">
      <path value="Composition.author.identifier.period.id" />
      <representation value="xmlAttr" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.author.identifier.period.extension">
      <path value="Composition.author.identifier.period.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.author.identifier.period.start">
      <path value="Composition.author.identifier.period.start" />
      <short value="해당 유효 기간의 시작 시점 (설정된 날짜 포함)" />
      <definition value="해당 유효 기간이 시작되는 시점을 나타냄. 유효 기간은 시작 시점으로 설정된 날짜를 포함함." />
      <comment value="If the low element is missing, the meaning is that the low boundary is not known." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Period.start" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="dateTime" />
      </type>
      <condition value="ele-1" />
      <condition value="per-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="DR.1" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./low" />
      </mapping>
    </element>
    <element id="Composition.author.identifier.period.end">
      <path value="Composition.author.identifier.period.end" />
      <short value="해당 유효 기간의 종료 시점 (설정된 날짜 포함)" />
      <definition value="기간의 종료. 기간의 종료가 누락된 경우, 인스턴스가 생성될 때 끝이 알려지거나 계획되지 않았음을 의미함. 시작일은 과거일 수 있고 종료일은 미래일 수 있음. 이는 해당 기간이 해당 시간에 종료될 예정임을 의미함" />
      <comment value="The high value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has an end value of 2012-02-03." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Period.end" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="dateTime" />
      </type>
      <meaningWhenMissing value="If the end of the period is missing, it means that the period is ongoing" />
      <condition value="ele-1" />
      <condition value="per-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="DR.2" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./high" />
      </mapping>
    </element>
    <element id="Composition.author.identifier.assigner">
      <path value="Composition.author.identifier.assigner" />
      <short value="식별자(identifier)를 발급한 조직(단순 텍스트 기입 가능)" />
      <definition value="식별자(identifier)를 발급/관리하는 조직(organization)" />
      <comment value="The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.assigner" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="Reference" />
        <targetProfile value="http://hl7.org/fhir/StructureDefinition/Organization" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ref-1" />
        <severity value="error" />
        <human value="SHALL have a contained resource if a local reference is provided" />
        <expression value="reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))" />
        <xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Reference" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.4 / (CX.4,CX.9,CX.10)" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="II.assigningAuthorityName but note that this is an improper use by the definition of the field.  Also Role.scoper" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="./IdentifierIssuingAuthority" />
      </mapping>
    </element>
    <element id="Composition.author.display">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="Composition.author.display" />
      <short value="해당 리소스(resource)에 대한 대체 텍스트(alternative text)" />
      <definition value="리소스(resource) 참조 외에도 리소스(resource)를 식별하기 위한 일반 텍스트 설명임." />
      <comment value="This is generally not the same as the Resource.text of the referenced resource.  The purpose is to identify what's being referenced, not to fully describe it." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Reference.display" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.title">
      <path value="Composition.title" />
      <short value="사람이 읽을 수 있는 이름 명칭" />
      <definition value="사람이 읽을 수 있는 구성요소(composition)의 공식 라벨(label)을 의미함." />
      <comment value="많은 Composition[]에서 Composition.type의 디스플레이 이름 또는 텍스트(text)와 같음 (예: a &quot;consultation&quot; or &quot;progress note&quot;). CDA는 제목(title)이 의무적이진 않지만 제목을 생략할 경우의 유용했던 사례가 없으므로 필수로 함. 시험사용기간 중 이 요구사항에 대한 피드백 환영함" />
      <min value="1" />
      <max value="1" />
      <base>
        <path value="Composition.title" />
        <min value="1" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./title" />
      </mapping>
      <mapping>
        <identity value="cda" />
        <map value=".title" />
      </mapping>
      <mapping>
        <identity value="fhirdocumentreference" />
        <map value="DocumentReference.description, DocumentReference.content.attachment.title" />
      </mapping>
    </element>
    <element id="Composition.confidentiality">
      <path value="Composition.confidentiality" />
      <short value="해당 코드는 구성요소(composition)의 기밀 수준" />
      <definition value="해당 코드는 구성요소(composition)의 기밀 수준을 지정함." />
      <comment value="이 요소(element)에 정확한 사용, 강제 및 매우 민감한 문서관련 이슈는 기본 사양(specification)범위를 벗어나고, 프로파일 구현에서 다룬다(보안 섹션 참조). 기밀문서가 아닌것처럼 다뤄지면 안되므로 이 요소는 수정자(modifier)로 지정됨" />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Composition.confidentiality" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="code" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="DocumentConfidentiality" />
        </extension>
        <strength value="required" />
        <description value="Codes specifying the level of confidentiality of the composition." />
        <valueSet value="http://terminology.hl7.org/ValueSet/v3-ConfidentialityClassification|2014-03-26" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value=".confidentialityCode" />
      </mapping>
      <mapping>
        <identity value="cda" />
        <map value=".confidentialityCode" />
      </mapping>
      <mapping>
        <identity value="fhirdocumentreference" />
        <map value="DocumentReference.securityLabel" />
      </mapping>
    </element>
    <element id="Composition.attester">
      <path value="Composition.attester" />
      <short value="구성요소(composition)의 정확성을 인증하는 사람/기관" />
      <definition value="composition/document의 정확성을 시험한 참가자" />
      <comment value="attester(시험자)는 한번씩만 나열함" />
      <requirements value="Identifies responsibility for the accuracy of the composition content." />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Composition.attester" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="BackboneElement" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value=".participation[typeCode=&quot;AUTHEN&quot;].role[classCode=&quot;ASSIGNED&quot;]" />
      </mapping>
      <mapping>
        <identity value="cda" />
        <map value=".authenticator/.legalAuthenticator" />
      </mapping>
      <mapping>
        <identity value="fhirdocumentreference" />
        <map value="DocumentReference.authenticator" />
      </mapping>
    </element>
    <element id="Composition.attester.id">
      <path value="Composition.attester.id" />
      <representation value="xmlAttr" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.attester.extension">
      <path value="Composition.attester.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.attester.modifierExtension">
      <path value="Composition.attester.modifierExtension" />
      <short value="Extensions that cannot be ignored even if unrecognized" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.&#xA;&#xA;Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself)." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <requirements value="Modifier extensions allow for extensions that *cannot* be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored.  This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the [definition of modifier extensions](extensibility.html#modifierExtension)." />
      <alias value="extensions" />
      <alias value="user content" />
      <alias value="modifiers" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="BackboneElement.modifierExtension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <isModifier value="true" />
      <isModifierReason value="Modifier extensions are expected to modify the meaning or interpretation of the element that contains them" />
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.attester.mode">
      <path value="Composition.attester.mode" />
      <short value="personal | professional | legal | official" />
      <definition value="인증자가 제공하는 증명의 유형" />
      <comment value="FHIR 문자열(string)은 크기가 1MB를 초과하지 않아야함." />
      <requirements value="Indicates the level of authority of the attestation." />
      <min value="1" />
      <max value="1" />
      <base>
        <path value="Composition.attester.mode" />
        <min value="1" />
        <max value="1" />
      </base>
      <type>
        <code value="code" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="CompositionAttestationMode" />
        </extension>
        <strength value="required" />
        <description value="The way in which a person authenticated a composition." />
        <valueSet value="http://hl7.org/fhir/ValueSet/composition-attestation-mode|4.0.1" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="unique(./modeCode)" />
      </mapping>
      <mapping>
        <identity value="cda" />
        <map value="implied by .authenticator/.legalAuthenticator" />
      </mapping>
    </element>
    <element id="Composition.attester.time">
      <path value="Composition.attester.time" />
      <short value="구성요소(composition)가 인증된 시점" />
      <definition value="구성요소(composition)가 인증된 시점을 의미함." />
      <requirements value="Identifies when the information in the composition was deemed accurate.  (Things may have changed since then.)." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Composition.attester.time" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="dateTime" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./time[type=&quot;TS&quot; and isNormalDatatype()]" />
      </mapping>
      <mapping>
        <identity value="cda" />
        <map value=".authenticator.time" />
      </mapping>
    </element>
    <element id="Composition.attester.party">
      <path value="Composition.attester.party" />
      <short value="구성요소(composition)을 인증하는 그룹" />
      <definition value="지정된 방식으로 구성요소(composition)을 입증한 사람/기관 속한 그룹을 나타냄." />
      <comment value="참조(reference)는 실제 FHIR 리소스(resource)에 대한 참조(reference)여야 하며, 해결이 가능해야 함 (접근 제어 허용, 일시적인 사용 불가능 등). 해결 방법은 URL에서 검색하거나, 리소스 타입(resource type)별로 적용할 수 있는 경우 절대 참조를 표준(Canonical) URL로 간주하고 로컬 레지스트리/저장소에서 검색하여 확인할 수 있음." />
      <requirements value="Identifies who has taken on the responsibility for accuracy of the composition content." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Composition.attester.party" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="Reference" />
        <targetProfile value="http://hl7.org/fhir/StructureDefinition/Patient" />
        <targetProfile value="http://hl7.org/fhir/StructureDefinition/RelatedPerson" />
        <targetProfile value="http://hl7.org/fhir/StructureDefinition/Practitioner" />
        <targetProfile value="http://hl7.org/fhir/StructureDefinition/PractitionerRole" />
        <targetProfile value="http://hl7.org/fhir/StructureDefinition/Organization" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ref-1" />
        <severity value="error" />
        <human value="SHALL have a contained resource if a local reference is provided" />
        <expression value="reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))" />
        <xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Reference" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" />
      </mapping>
      <mapping>
        <identity value="w5" />
        <map value="FiveWs.witness" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./role[classCode=&quot;ASSIGNED&quot; and isNormalRole]/player[determinerCode=&quot;INST&quot; and classCode=(&quot;DEV&quot;, &quot;PSN&quot;) and isNormalEntity()] or ./role[classCode=&quot;ASSIGNED&quot; and isNormalRole and not(player)]/scoper[determinerCode=&quot;INST&quot; and classCode=&quot;ORG&quot; and isNormalEntity()]" />
      </mapping>
      <mapping>
        <identity value="cda" />
        <map value=".authenticator.assignedEnttty" />
      </mapping>
    </element>
    <element id="Composition.attester.party.id">
      <path value="Composition.attester.party.id" />
      <representation value="xmlAttr" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.attester.party.extension">
      <path value="Composition.attester.party.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.attester.party.reference">
      <path value="Composition.attester.party.reference" />
      <short value="문자로 표현된(literal) 참조, 상대적, 내부적 혹은 절대적인 URL" />
      <definition value="다른 리소스(resource)를 찾을 수 있는 위치에 대한 참조를 의미함. 해당 참조는 service base URL에 상대적인(relative) 경우 상대적 참조, 혹은 해당 리소스(resource)를 찾을 수 있는 위치인 절대(absolute) URL일 수 있음. 해당 참조는 버전에 따라 다를 수 있음. 해당 참조가 FHIR RESTful 서버가 아닌 경우, 버전에 따라 다른 것으로 간주함. 내부 구문(Internal Fragment) 참조('#'으로 시작)는 포함되어 있는 리소스(resource)를 참조함." />
      <comment value="Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries.   Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure &quot;/[type]/[id]&quot; then it should be assumed that the reference is to a FHIR RESTful server." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Reference.reference" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <condition value="ref-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.attester.party.type">
      <path value="Composition.attester.party.type" />
      <short value="참조(reference)가 참조(refer)하는 유형(type)  (예. &quot;Patient&quot;)" />
      <definition value="참조 대상의 예상 형식(expected type).  Reference.type과 Reference.reference가 모두 채워지고 Reference.reference가 FHIR URL이면 두가지 모두 일치해야함. 유형(type)은이 참조가 참조하는 유형(type) 인 리소스(resource) 정의의 표준(Canonical) URL임. 참조는 http://hl7.org/fhir/StructureDefinition/과 관련된 URL임. (예) &quot; 환자 &quot; http://hl7.org/fhir/StructureDefinition/Patient에 대한 참조. 절대(absolute) URL은 논리 모델에만 허용됨 (리소스(resource)가 아닌 논리 모델의 참조에서만 사용할 수 있음)." />
      <comment value="This element is used to indicate the type of  the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Reference.type" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="uri" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="FHIRResourceTypeExt" />
        </extension>
        <strength value="extensible" />
        <description value="Aa resource (or, for logical models, the URI of the logical model)." />
        <valueSet value="http://hl7.org/fhir/ValueSet/resource-types" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.attester.party.identifier">
      <path value="Composition.attester.party.identifier" />
      <short value="문자로 표현된(literal) 참조를 알 수 없는 경우 사용하는, 논리적(logical) 참조" />
      <definition value="대상 리소스(resource)의 식별자(identifier). 이것은 다른 리소스(resource)를 직접 참조할 방법이 없을 때 사용- 해당 엔티티(entity)가 FHIR 서버를 통해 사용할 수 없거나  리소스(resource) 작성자가 알려진 식별자(identifier)를 실제 위치로 변활할 방법이 없기 때문에 이 방법이 사용됨. Reference.identifier가 실제로 FHIR 인스턴스로 노출되는 것을 가리킬(point) 필요는 없지만, FHIR 인스턴스로 노출될 것으로 예상되는 비즈니스 개념(concept)을 가리켜야하며, 해당 인스턴스는 참조가 허용되는 FHIR 리소스 타입(resource type)이여야 함." />
      <comment value="When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. &#xA;&#xA;When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference&#xA;&#xA;Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.&#xA;&#xA;Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference.  For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport).  One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any)." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Reference.identifier" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="Identifier" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX / EI (occasionally, more often EI maps to a resource id or a URL)" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs.  Also maps to Role[classCode=IDENT]" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="Identifier" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value=".identifier" />
      </mapping>
    </element>
    <element id="Composition.attester.party.identifier.id">
      <path value="Composition.attester.party.identifier.id" />
      <representation value="xmlAttr" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.attester.party.identifier.extension">
      <path value="Composition.attester.party.identifier.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.attester.party.identifier.use">
      <path value="Composition.attester.party.identifier.use" />
      <short value="usual | official | temp | secondary | old (If known)" />
      <definition value="해당 식별자(identifier)의 목적" />
      <comment value="Applications can assume that an identifier is permanent unless it explicitly says that it is temporary." />
      <requirements value="Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.use" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="code" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isModifier value="true" />
      <isModifierReason value="This is labeled as &quot;Is Modifier&quot; because applications should not mistake a temporary id for a permanent one." />
      <isSummary value="true" />
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="IdentifierUse" />
        </extension>
        <strength value="required" />
        <description value="Identifies the purpose for this identifier, if known ." />
        <valueSet value="http://hl7.org/fhir/ValueSet/identifier-use|4.0.1" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="N/A" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="Role.code or implied by context" />
      </mapping>
    </element>
    <element id="Composition.attester.party.identifier.type">
      <path value="Composition.attester.party.identifier.type" />
      <short value="식별자(identifier)에 대한 설명" />
      <definition value="특정 목적으로 사용되는 식별자(identifier)를 결정하기 위해 사용하는 식별자(identifier)의 코드화된(coded) 유형(type)을 나타냄." />
      <comment value="This element deals only with general categories of identifiers.  It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage.   Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type." />
      <requirements value="Allows users to make use of identifiers when the identifier system is not known." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.type" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="CodeableConcept" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="IdentifierType" />
        </extension>
        <strength value="extensible" />
        <description value="A coded type for an identifier that can be used to determine which identifier to use for a specific purpose." />
        <valueSet value="http://hl7.org/fhir/ValueSet/identifier-type" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CE/CNE/CWE" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CD" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept rdfs:subClassOf dt:CD" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.5" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="Role.code or implied by context" />
      </mapping>
    </element>
    <element id="Composition.attester.party.identifier.type.id">
      <path value="Composition.attester.party.identifier.type.id" />
      <representation value="xmlAttr" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.attester.party.identifier.type.extension">
      <path value="Composition.attester.party.identifier.type.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.attester.party.identifier.type.coding">
      <path value="Composition.attester.party.identifier.type.coding" />
      <short value="용어체계(terminology system)에 의해 정의된 코드(code)" />
      <definition value="용어체계(terminology system)에 의해 정의된 코드(code) 참조" />
      <comment value="Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information.  Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true." />
      <requirements value="Allows for alternative encodings within a code system, and translations to other code systems." />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="CodeableConcept.coding" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Coding" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CE/CNE/CWE subset one of the sets of component 1-3 or 4-6" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CV" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding rdfs:subClassOf dt:CDCoding" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.1-8, C*E.10-22" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="union(., ./translation)" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding" />
      </mapping>
    </element>
    <element id="Composition.attester.party.identifier.type.coding.id">
      <path value="Composition.attester.party.identifier.type.coding.id" />
      <representation value="xmlAttr" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.attester.party.identifier.type.coding.extension">
      <path value="Composition.attester.party.identifier.type.coding.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.attester.party.identifier.type.coding.system">
      <path value="Composition.attester.party.identifier.type.coding.system" />
      <short value="용어체계 식별(Identity of terminology system)" />
      <definition value="코드(code)에서 기호(symbol)의 의미를 정의하는 CodeSystem[]를 식별" />
      <comment value="The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...).  OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously." />
      <requirements value="Need to be unambiguous about the source of the definition of the symbol." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.system" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="uri" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.3" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./codeSystem" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem" />
      </mapping>
    </element>
    <element id="Composition.attester.party.identifier.type.coding.version">
      <path value="Composition.attester.party.identifier.type.coding.version" />
      <short value="해당 시스템의 버전 정보 - 필요한 경우" />
      <definition value="해당 코드(code)를 선택한 시점에 사용된 CodeSystem[]의 버전임. 올바로 관리된 CodeSystem[]은 코드(code)의 의미가 버전과 관계없이 일관적이므로 버전을 보고할 필요가 없음. 그러나 CodeSystem[]의 관리 상태는 지속적으로 보장할 수 없는 부분이며, 코드(code)의 의미가 일관적임을 보장할 수 없는 경우 버전이 교체되어야 함." />
      <comment value="Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.version" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.7" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./codeSystemVersion" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion" />
      </mapping>
    </element>
    <element id="Composition.attester.party.identifier.type.coding.code">
      <path value="Composition.attester.party.identifier.type.coding.code" />
      <short value="시스템에 정의된 구문(syntax)의 기호(symbol)" />
      <definition value="시스템에 정의된 구문(syntax)의 기호(symbol). 기호(symbol)은 CodeSystem[]에 의해 정의된 구문에서 미리 정의된 코드(code) 또는 표현(expression)일 수 있음. (예: post-coordination)" />
      <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" />
      <requirements value="Need to refer to a particular code in the system." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.code" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="code" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.1" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./code" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code" />
      </mapping>
    </element>
    <element id="Composition.attester.party.identifier.type.coding.display">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="Composition.attester.party.identifier.type.coding.display" />
      <short value="시스템에 정의된 표기(representation)" />
      <definition value="시스템의 규칙(rules)에 따른, 시스템에서 코드(code)의 의미 표기(representation)" />
      <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" />
      <requirements value="Need to be able to carry a human-readable meaning of the code for readers that do not know  the system." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.display" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.2 - but note this is not well followed" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CV.displayName" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName" />
      </mapping>
    </element>
    <element id="Composition.attester.party.identifier.type.coding.userSelected">
      <path value="Composition.attester.party.identifier.type.coding.userSelected" />
      <short value="해당 코딩(coding)이 사용자(user)에 의해 직접(directly) 선택되었는지 여부" />
      <definition value="해당 코딩(coding)이 사용자(user)에 의해 직접 선택되었음을 나타냄 - (예) 사용가능한 항목(item)의 선택 목록(list) 중 하나 (코드 또는 디스플레이 )" />
      <comment value="Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely." />
      <requirements value="This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.userSelected" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="boolean" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="Sometimes implied by being first" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CD.codingRationale" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map;   fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [     fhir:source &quot;true&quot;;     fhir:target dt:CDCoding.codingRationale\#O   ]" />
      </mapping>
    </element>
    <element id="Composition.attester.party.identifier.type.text">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="Composition.attester.party.identifier.type.text" />
      <short value="개념(concept)에 대한 일반 텍스트 표현 (plain text representation)" />
      <definition value="데이터를 입력한 사용자(user)의 입장에서 보거나(seen)/선택하거나(selected)/언급한대로(uttered)의 개념(concept), 혹은 사용자(user)가 의도한 의미를 사람이 사용하는 언어로 표현한 것임." />
      <comment value="Very often the text is the same as a displayName of one of the codings." />
      <requirements value="The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="CodeableConcept.text" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.9. But note many systems use C*E.2 for this" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./originalText[mediaType/code=&quot;text/plain&quot;]/data" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText" />
      </mapping>
    </element>
    <element id="Composition.attester.party.identifier.system">
      <path value="Composition.attester.party.identifier.system" />
      <short value="식별자(identifier) 값의 네임스페이스(namespace)" />
      <definition value="설정 값에 대한 네임스페이스 (namespace), 즉 고유(unique)한 설정값을 설명하는 URL을 설정함." />
      <comment value="Identifier.system is always case sensitive." />
      <requirements value="There are many sets  of identifiers.  To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.system" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="uri" />
      </type>
      <example>
        <label value="General" />
        <valueUri value="http://www.acme.com/identifiers/patient" />
      </example>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.4 / EI-2-4" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="II.root or Role.id.root" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="./IdentifierType" />
      </mapping>
    </element>
    <element id="Composition.attester.party.identifier.value">
      <path value="Composition.attester.party.identifier.value" />
      <short value="고유(unique)한 값(value)" />
      <definition value="일반적으로 사용자(user)와 관련(relevant)이 있으며, 시스템 컨텍스트(context) 내에서 고유(unique)한 식별자(identifier)의 일부분임." />
      <comment value="If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986.  The value's primary purpose is computational mapping.  As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.)  A value formatted for human display can be conveyed using the [Rendered Value extension](extension-rendered-value.html). Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.value" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <example>
        <label value="General" />
        <valueString value="123456" />
      </example>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.1 / EI.1" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root)" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="./Value" />
      </mapping>
    </element>
    <element id="Composition.attester.party.identifier.period">
      <path value="Composition.attester.party.identifier.period" />
      <short value="식별자(identifier)의 유효 기간" />
      <definition value="식별자(identifier)가 사용 가능했거나 가능한 기간을 나타냄." />
      <comment value="A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. &quot;the patient was an inpatient of the hospital for this time range&quot;) or one value from the range applies (e.g. &quot;give to the patient between these two times&quot;).&#xA;&#xA;Period is not used for a duration (a measure of elapsed time). See [Duration](datatypes.html#Duration)." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.period" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="Period" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="per-1" />
        <severity value="error" />
        <human value="If present, start SHALL have a lower value than end" />
        <expression value="start.hasValue().not() or end.hasValue().not() or (start &lt;= end)" />
        <xpath value="not(exists(f:start/@value)) or not(exists(f:end/@value)) or (xs:dateTime(f:start/@value) &lt;= xs:dateTime(f:end/@value))" />
        <source value="http://hl7.org/fhir/StructureDefinition/Period" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="DR" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="IVL&lt;TS&gt;[lowClosed=&quot;true&quot; and highClosed=&quot;true&quot;] or URG&lt;TS&gt;[lowClosed=&quot;true&quot; and highClosed=&quot;true&quot;]" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.7 + CX.8" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="Role.effectiveTime or implied by context" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="./StartDate and ./EndDate" />
      </mapping>
    </element>
    <element id="Composition.attester.party.identifier.period.id">
      <path value="Composition.attester.party.identifier.period.id" />
      <representation value="xmlAttr" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.attester.party.identifier.period.extension">
      <path value="Composition.attester.party.identifier.period.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.attester.party.identifier.period.start">
      <path value="Composition.attester.party.identifier.period.start" />
      <short value="해당 유효 기간의 시작 시점 (설정된 날짜 포함)" />
      <definition value="해당 유효 기간이 시작되는 시점을 나타냄. 유효 기간은 시작 시점으로 설정된 날짜를 포함함." />
      <comment value="If the low element is missing, the meaning is that the low boundary is not known." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Period.start" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="dateTime" />
      </type>
      <condition value="ele-1" />
      <condition value="per-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="DR.1" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./low" />
      </mapping>
    </element>
    <element id="Composition.attester.party.identifier.period.end">
      <path value="Composition.attester.party.identifier.period.end" />
      <short value="해당 유효 기간의 종료 시점 (설정된 날짜 포함)" />
      <definition value="기간의 종료. 기간의 종료가 누락된 경우, 인스턴스가 생성될 때 끝이 알려지거나 계획되지 않았음을 의미함. 시작일은 과거일 수 있고 종료일은 미래일 수 있음. 이는 해당 기간이 해당 시간에 종료될 예정임을 의미함" />
      <comment value="The high value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has an end value of 2012-02-03." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Period.end" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="dateTime" />
      </type>
      <meaningWhenMissing value="If the end of the period is missing, it means that the period is ongoing" />
      <condition value="ele-1" />
      <condition value="per-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="DR.2" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./high" />
      </mapping>
    </element>
    <element id="Composition.attester.party.identifier.assigner">
      <path value="Composition.attester.party.identifier.assigner" />
      <short value="식별자(identifier)를 발급한 조직(단순 텍스트 기입 가능)" />
      <definition value="식별자(identifier)를 발급/관리하는 조직(organization)" />
      <comment value="The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.assigner" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="Reference" />
        <targetProfile value="http://hl7.org/fhir/StructureDefinition/Organization" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ref-1" />
        <severity value="error" />
        <human value="SHALL have a contained resource if a local reference is provided" />
        <expression value="reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))" />
        <xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Reference" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.4 / (CX.4,CX.9,CX.10)" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="II.assigningAuthorityName but note that this is an improper use by the definition of the field.  Also Role.scoper" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="./IdentifierIssuingAuthority" />
      </mapping>
    </element>
    <element id="Composition.attester.party.display">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="Composition.attester.party.display" />
      <short value="해당 리소스(resource)에 대한 대체 텍스트(alternative text)" />
      <definition value="리소스(resource) 참조 외에도 리소스(resource)를 식별하기 위한 일반 텍스트 설명임." />
      <comment value="This is generally not the same as the Resource.text of the referenced resource.  The purpose is to identify what's being referenced, not to fully describe it." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Reference.display" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.custodian">
      <path value="Composition.custodian" />
      <short value="구성요소(composition)를 유지하는 그룹." />
      <definition value="composition/document 정보 접근과 유지관리를 책임지는 조직이나 그룹을 식별함" />
      <comment value="문서가 Composition[]으로 부터 파생된 경우 유용함. document의 최신 버전을 가져오는 방법에 대한 가이드를 제공. 이것은 때때로 저작인증시스템이 알수없고, 컨텍스트에 따라 추론이 될 수 있기 때문에 선택사항임. 그러나 파생된 문서를 작업할 때 이 정보를 아는 것이 중요하므로, 이것을(custodian)를 제공하는것을 권장함" />
      <requirements value="Identifies where to go to find the current version, where to report issues, etc." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Composition.custodian" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="Reference" />
        <targetProfile value="http://hl7.org/fhir/StructureDefinition/Organization" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ref-1" />
        <severity value="error" />
        <human value="SHALL have a contained resource if a local reference is provided" />
        <expression value="reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))" />
        <xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Reference" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value=".participation[typeCode=&quot;RCV&quot;].role[classCode=&quot;CUST&quot;].scoper[classCode=&quot;ORG&quot; and determinerCode=&quot;INST&quot;]" />
      </mapping>
      <mapping>
        <identity value="cda" />
        <map value=".custodian.assignedCustodian" />
      </mapping>
      <mapping>
        <identity value="fhirdocumentreference" />
        <map value="DocumentReference.custodian" />
      </mapping>
    </element>
    <element id="Composition.custodian.id">
      <path value="Composition.custodian.id" />
      <representation value="xmlAttr" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.custodian.extension">
      <path value="Composition.custodian.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.custodian.reference">
      <path value="Composition.custodian.reference" />
      <short value="문자로 표현된(literal) 참조, 상대적, 내부적 혹은 절대적인 URL" />
      <definition value="다른 리소스(resource)를 찾을 수 있는 위치에 대한 참조를 의미함. 해당 참조는 service base URL에 상대적인(relative) 경우 상대적 참조, 혹은 해당 리소스(resource)를 찾을 수 있는 위치인 절대(absolute) URL일 수 있음. 해당 참조는 버전에 따라 다를 수 있음. 해당 참조가 FHIR RESTful 서버가 아닌 경우, 버전에 따라 다른 것으로 간주함. 내부 구문(Internal Fragment) 참조('#'으로 시작)는 포함되어 있는 리소스(resource)를 참조함." />
      <comment value="Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries.   Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure &quot;/[type]/[id]&quot; then it should be assumed that the reference is to a FHIR RESTful server." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Reference.reference" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <condition value="ref-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.custodian.type">
      <path value="Composition.custodian.type" />
      <short value="참조(reference)가 참조(refer)하는 유형(type)  (예. &quot;Patient&quot;)" />
      <definition value="참조 대상의 예상 형식(expected type).  Reference.type과 Reference.reference가 모두 채워지고 Reference.reference가 FHIR URL이면 두가지 모두 일치해야함. 유형(type)은이 참조가 참조하는 유형(type) 인 리소스(resource) 정의의 표준(Canonical) URL임. 참조는 http://hl7.org/fhir/StructureDefinition/과 관련된 URL임. (예) &quot; 환자 &quot; http://hl7.org/fhir/StructureDefinition/Patient에 대한 참조. 절대(absolute) URL은 논리 모델에만 허용됨 (리소스(resource)가 아닌 논리 모델의 참조에서만 사용할 수 있음)." />
      <comment value="This element is used to indicate the type of  the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Reference.type" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="uri" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="FHIRResourceTypeExt" />
        </extension>
        <strength value="extensible" />
        <description value="Aa resource (or, for logical models, the URI of the logical model)." />
        <valueSet value="http://hl7.org/fhir/ValueSet/resource-types" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.custodian.identifier">
      <path value="Composition.custodian.identifier" />
      <short value="문자로 표현된(literal) 참조를 알 수 없는 경우 사용하는, 논리적(logical) 참조" />
      <definition value="대상 리소스(resource)의 식별자(identifier). 이것은 다른 리소스(resource)를 직접 참조할 방법이 없을 때 사용- 해당 엔티티(entity)가 FHIR 서버를 통해 사용할 수 없거나  리소스(resource) 작성자가 알려진 식별자(identifier)를 실제 위치로 변활할 방법이 없기 때문에 이 방법이 사용됨. Reference.identifier가 실제로 FHIR 인스턴스로 노출되는 것을 가리킬(point) 필요는 없지만, FHIR 인스턴스로 노출될 것으로 예상되는 비즈니스 개념(concept)을 가리켜야하며, 해당 인스턴스는 참조가 허용되는 FHIR 리소스 타입(resource type)이여야 함." />
      <comment value="When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. &#xA;&#xA;When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference&#xA;&#xA;Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.&#xA;&#xA;Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference.  For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport).  One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any)." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Reference.identifier" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="Identifier" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX / EI (occasionally, more often EI maps to a resource id or a URL)" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs.  Also maps to Role[classCode=IDENT]" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="Identifier" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value=".identifier" />
      </mapping>
    </element>
    <element id="Composition.custodian.identifier.id">
      <path value="Composition.custodian.identifier.id" />
      <representation value="xmlAttr" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.custodian.identifier.extension">
      <path value="Composition.custodian.identifier.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.custodian.identifier.use">
      <path value="Composition.custodian.identifier.use" />
      <short value="usual | official | temp | secondary | old (If known)" />
      <definition value="해당 식별자(identifier)의 목적" />
      <comment value="Applications can assume that an identifier is permanent unless it explicitly says that it is temporary." />
      <requirements value="Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.use" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="code" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isModifier value="true" />
      <isModifierReason value="This is labeled as &quot;Is Modifier&quot; because applications should not mistake a temporary id for a permanent one." />
      <isSummary value="true" />
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="IdentifierUse" />
        </extension>
        <strength value="required" />
        <description value="Identifies the purpose for this identifier, if known ." />
        <valueSet value="http://hl7.org/fhir/ValueSet/identifier-use|4.0.1" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="N/A" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="Role.code or implied by context" />
      </mapping>
    </element>
    <element id="Composition.custodian.identifier.type">
      <path value="Composition.custodian.identifier.type" />
      <short value="식별자(identifier)에 대한 설명" />
      <definition value="특정 목적으로 사용되는 식별자(identifier)를 결정하기 위해 사용하는 식별자(identifier)의 코드화된(coded) 유형(type)을 나타냄." />
      <comment value="This element deals only with general categories of identifiers.  It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage.   Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type." />
      <requirements value="Allows users to make use of identifiers when the identifier system is not known." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.type" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="CodeableConcept" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="IdentifierType" />
        </extension>
        <strength value="extensible" />
        <description value="A coded type for an identifier that can be used to determine which identifier to use for a specific purpose." />
        <valueSet value="http://hl7.org/fhir/ValueSet/identifier-type" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CE/CNE/CWE" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CD" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept rdfs:subClassOf dt:CD" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.5" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="Role.code or implied by context" />
      </mapping>
    </element>
    <element id="Composition.custodian.identifier.type.id">
      <path value="Composition.custodian.identifier.type.id" />
      <representation value="xmlAttr" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.custodian.identifier.type.extension">
      <path value="Composition.custodian.identifier.type.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.custodian.identifier.type.coding">
      <path value="Composition.custodian.identifier.type.coding" />
      <short value="용어체계(terminology system)에 의해 정의된 코드(code)" />
      <definition value="용어체계(terminology system)에 의해 정의된 코드(code) 참조" />
      <comment value="Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information.  Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true." />
      <requirements value="Allows for alternative encodings within a code system, and translations to other code systems." />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="CodeableConcept.coding" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Coding" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CE/CNE/CWE subset one of the sets of component 1-3 or 4-6" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CV" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding rdfs:subClassOf dt:CDCoding" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.1-8, C*E.10-22" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="union(., ./translation)" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding" />
      </mapping>
    </element>
    <element id="Composition.custodian.identifier.type.coding.id">
      <path value="Composition.custodian.identifier.type.coding.id" />
      <representation value="xmlAttr" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.custodian.identifier.type.coding.extension">
      <path value="Composition.custodian.identifier.type.coding.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.custodian.identifier.type.coding.system">
      <path value="Composition.custodian.identifier.type.coding.system" />
      <short value="용어체계 식별(Identity of terminology system)" />
      <definition value="코드(code)에서 기호(symbol)의 의미를 정의하는 CodeSystem[]를 식별" />
      <comment value="The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...).  OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously." />
      <requirements value="Need to be unambiguous about the source of the definition of the symbol." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.system" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="uri" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.3" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./codeSystem" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem" />
      </mapping>
    </element>
    <element id="Composition.custodian.identifier.type.coding.version">
      <path value="Composition.custodian.identifier.type.coding.version" />
      <short value="해당 시스템의 버전 정보 - 필요한 경우" />
      <definition value="해당 코드(code)를 선택한 시점에 사용된 CodeSystem[]의 버전임. 올바로 관리된 CodeSystem[]은 코드(code)의 의미가 버전과 관계없이 일관적이므로 버전을 보고할 필요가 없음. 그러나 CodeSystem[]의 관리 상태는 지속적으로 보장할 수 없는 부분이며, 코드(code)의 의미가 일관적임을 보장할 수 없는 경우 버전이 교체되어야 함." />
      <comment value="Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.version" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.7" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./codeSystemVersion" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion" />
      </mapping>
    </element>
    <element id="Composition.custodian.identifier.type.coding.code">
      <path value="Composition.custodian.identifier.type.coding.code" />
      <short value="시스템에 정의된 구문(syntax)의 기호(symbol)" />
      <definition value="시스템에 정의된 구문(syntax)의 기호(symbol). 기호(symbol)은 CodeSystem[]에 의해 정의된 구문에서 미리 정의된 코드(code) 또는 표현(expression)일 수 있음. (예: post-coordination)" />
      <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" />
      <requirements value="Need to refer to a particular code in the system." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.code" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="code" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.1" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./code" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code" />
      </mapping>
    </element>
    <element id="Composition.custodian.identifier.type.coding.display">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="Composition.custodian.identifier.type.coding.display" />
      <short value="시스템에 정의된 표기(representation)" />
      <definition value="시스템의 규칙(rules)에 따른, 시스템에서 코드(code)의 의미 표기(representation)" />
      <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" />
      <requirements value="Need to be able to carry a human-readable meaning of the code for readers that do not know  the system." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.display" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.2 - but note this is not well followed" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CV.displayName" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName" />
      </mapping>
    </element>
    <element id="Composition.custodian.identifier.type.coding.userSelected">
      <path value="Composition.custodian.identifier.type.coding.userSelected" />
      <short value="해당 코딩(coding)이 사용자(user)에 의해 직접(directly) 선택되었는지 여부" />
      <definition value="해당 코딩(coding)이 사용자(user)에 의해 직접 선택되었음을 나타냄 - (예) 사용가능한 항목(item)의 선택 목록(list) 중 하나 (코드 또는 디스플레이 )" />
      <comment value="Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely." />
      <requirements value="This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.userSelected" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="boolean" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="Sometimes implied by being first" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CD.codingRationale" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map;   fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [     fhir:source &quot;true&quot;;     fhir:target dt:CDCoding.codingRationale\#O   ]" />
      </mapping>
    </element>
    <element id="Composition.custodian.identifier.type.text">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="Composition.custodian.identifier.type.text" />
      <short value="개념(concept)에 대한 일반 텍스트 표현 (plain text representation)" />
      <definition value="데이터를 입력한 사용자(user)의 입장에서 보거나(seen)/선택하거나(selected)/언급한대로(uttered)의 개념(concept), 혹은 사용자(user)가 의도한 의미를 사람이 사용하는 언어로 표현한 것임." />
      <comment value="Very often the text is the same as a displayName of one of the codings." />
      <requirements value="The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="CodeableConcept.text" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.9. But note many systems use C*E.2 for this" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./originalText[mediaType/code=&quot;text/plain&quot;]/data" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText" />
      </mapping>
    </element>
    <element id="Composition.custodian.identifier.system">
      <path value="Composition.custodian.identifier.system" />
      <short value="식별자(identifier) 값의 네임스페이스(namespace)" />
      <definition value="설정 값에 대한 네임스페이스 (namespace), 즉 고유(unique)한 설정값을 설명하는 URL을 설정함." />
      <comment value="Identifier.system is always case sensitive." />
      <requirements value="There are many sets  of identifiers.  To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.system" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="uri" />
      </type>
      <example>
        <label value="General" />
        <valueUri value="http://www.acme.com/identifiers/patient" />
      </example>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.4 / EI-2-4" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="II.root or Role.id.root" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="./IdentifierType" />
      </mapping>
    </element>
    <element id="Composition.custodian.identifier.value">
      <path value="Composition.custodian.identifier.value" />
      <short value="고유(unique)한 값(value)" />
      <definition value="일반적으로 사용자(user)와 관련(relevant)이 있으며, 시스템 컨텍스트(context) 내에서 고유(unique)한 식별자(identifier)의 일부분임." />
      <comment value="If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986.  The value's primary purpose is computational mapping.  As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.)  A value formatted for human display can be conveyed using the [Rendered Value extension](extension-rendered-value.html). Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.value" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <example>
        <label value="General" />
        <valueString value="123456" />
      </example>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.1 / EI.1" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root)" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="./Value" />
      </mapping>
    </element>
    <element id="Composition.custodian.identifier.period">
      <path value="Composition.custodian.identifier.period" />
      <short value="식별자(identifier)의 유효 기간" />
      <definition value="식별자(identifier)가 사용 가능했거나 가능한 기간을 나타냄." />
      <comment value="A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. &quot;the patient was an inpatient of the hospital for this time range&quot;) or one value from the range applies (e.g. &quot;give to the patient between these two times&quot;).&#xA;&#xA;Period is not used for a duration (a measure of elapsed time). See [Duration](datatypes.html#Duration)." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.period" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="Period" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="per-1" />
        <severity value="error" />
        <human value="If present, start SHALL have a lower value than end" />
        <expression value="start.hasValue().not() or end.hasValue().not() or (start &lt;= end)" />
        <xpath value="not(exists(f:start/@value)) or not(exists(f:end/@value)) or (xs:dateTime(f:start/@value) &lt;= xs:dateTime(f:end/@value))" />
        <source value="http://hl7.org/fhir/StructureDefinition/Period" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="DR" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="IVL&lt;TS&gt;[lowClosed=&quot;true&quot; and highClosed=&quot;true&quot;] or URG&lt;TS&gt;[lowClosed=&quot;true&quot; and highClosed=&quot;true&quot;]" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.7 + CX.8" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="Role.effectiveTime or implied by context" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="./StartDate and ./EndDate" />
      </mapping>
    </element>
    <element id="Composition.custodian.identifier.period.id">
      <path value="Composition.custodian.identifier.period.id" />
      <representation value="xmlAttr" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.custodian.identifier.period.extension">
      <path value="Composition.custodian.identifier.period.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.custodian.identifier.period.start">
      <path value="Composition.custodian.identifier.period.start" />
      <short value="해당 유효 기간의 시작 시점 (설정된 날짜 포함)" />
      <definition value="해당 유효 기간이 시작되는 시점을 나타냄. 유효 기간은 시작 시점으로 설정된 날짜를 포함함." />
      <comment value="If the low element is missing, the meaning is that the low boundary is not known." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Period.start" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="dateTime" />
      </type>
      <condition value="ele-1" />
      <condition value="per-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="DR.1" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./low" />
      </mapping>
    </element>
    <element id="Composition.custodian.identifier.period.end">
      <path value="Composition.custodian.identifier.period.end" />
      <short value="해당 유효 기간의 종료 시점 (설정된 날짜 포함)" />
      <definition value="기간의 종료. 기간의 종료가 누락된 경우, 인스턴스가 생성될 때 끝이 알려지거나 계획되지 않았음을 의미함. 시작일은 과거일 수 있고 종료일은 미래일 수 있음. 이는 해당 기간이 해당 시간에 종료될 예정임을 의미함" />
      <comment value="The high value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has an end value of 2012-02-03." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Period.end" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="dateTime" />
      </type>
      <meaningWhenMissing value="If the end of the period is missing, it means that the period is ongoing" />
      <condition value="ele-1" />
      <condition value="per-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="DR.2" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./high" />
      </mapping>
    </element>
    <element id="Composition.custodian.identifier.assigner">
      <path value="Composition.custodian.identifier.assigner" />
      <short value="식별자(identifier)를 발급한 조직(단순 텍스트 기입 가능)" />
      <definition value="식별자(identifier)를 발급/관리하는 조직(organization)" />
      <comment value="The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.assigner" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="Reference" />
        <targetProfile value="http://hl7.org/fhir/StructureDefinition/Organization" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ref-1" />
        <severity value="error" />
        <human value="SHALL have a contained resource if a local reference is provided" />
        <expression value="reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))" />
        <xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Reference" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.4 / (CX.4,CX.9,CX.10)" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="II.assigningAuthorityName but note that this is an improper use by the definition of the field.  Also Role.scoper" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="./IdentifierIssuingAuthority" />
      </mapping>
    </element>
    <element id="Composition.custodian.display">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="Composition.custodian.display" />
      <short value="해당 리소스(resource)에 대한 대체 텍스트(alternative text)" />
      <definition value="리소스(resource) 참조 외에도 리소스(resource)를 식별하기 위한 일반 텍스트 설명임." />
      <comment value="This is generally not the same as the Resource.text of the referenced resource.  The purpose is to identify what's being referenced, not to fully describe it." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Reference.display" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.relatesTo">
      <path value="Composition.relatesTo" />
      <short value="다른 compositions/documents과의 관계" />
      <definition value="해당 구성요소(composition)와 이미 존재하는 다른 구성요소 혹은 문서와의 관계를 나타냄." />
      <comment value="문서는 버전 별 구성요소(composition) 임" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Composition.relatesTo" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="BackboneElement" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value=".outboundRelationship" />
      </mapping>
      <mapping>
        <identity value="cda" />
        <map value=".relatedDocument" />
      </mapping>
      <mapping>
        <identity value="fhirdocumentreference" />
        <map value="DocumentReference.relatesTo" />
      </mapping>
    </element>
    <element id="Composition.relatesTo.id">
      <path value="Composition.relatesTo.id" />
      <representation value="xmlAttr" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.relatesTo.extension">
      <path value="Composition.relatesTo.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.relatesTo.modifierExtension">
      <path value="Composition.relatesTo.modifierExtension" />
      <short value="Extensions that cannot be ignored even if unrecognized" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.&#xA;&#xA;Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself)." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <requirements value="Modifier extensions allow for extensions that *cannot* be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored.  This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the [definition of modifier extensions](extensibility.html#modifierExtension)." />
      <alias value="extensions" />
      <alias value="user content" />
      <alias value="modifiers" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="BackboneElement.modifierExtension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <isModifier value="true" />
      <isModifierReason value="Modifier extensions are expected to modify the meaning or interpretation of the element that contains them" />
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.relatesTo.code">
      <path value="Composition.relatesTo.code" />
      <short value="replaces | transforms | signs | appends" />
      <definition value="해당 구성요소(composition)과 다른 구성요소(composition) 혹은 문서와의 연관성을 나타내는 관계 유형." />
      <comment value="해당 문서(document)가 다른 문서를 추가하는 경우, 참조된 문서에 대한 접근 없이 문서를 완전히 이해할 수 없음." />
      <min value="1" />
      <max value="1" />
      <base>
        <path value="Composition.relatesTo.code" />
        <min value="1" />
        <max value="1" />
      </base>
      <type>
        <code value="code" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="DocumentRelationshipType" />
        </extension>
        <strength value="required" />
        <description value="The type of relationship between documents." />
        <valueSet value="http://hl7.org/fhir/ValueSet/document-relationship-type|4.0.1" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value=".outboundRelationship.typeCode" />
      </mapping>
      <mapping>
        <identity value="cda" />
        <map value=".relatedDocument.typeCode" />
      </mapping>
      <mapping>
        <identity value="fhirdocumentreference" />
        <map value="DocumentReference.relatesTo.code" />
      </mapping>
    </element>
    <element id="Composition.relatesTo.target[x]">
      <path value="Composition.relatesTo.target[x]" />
      <short value="해당 관계의 대상(target)" />
      <definition value="이 관계의 대상 composition/document" />
      <min value="1" />
      <max value="1" />
      <base>
        <path value="Composition.relatesTo.target[x]" />
        <min value="1" />
        <max value="1" />
      </base>
      <type>
        <code value="Identifier" />
      </type>
      <type>
        <code value="Reference" />
        <targetProfile value="http://hl7.org/fhir/StructureDefinition/Composition" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value=".target[classCode=&quot;DOC&quot;, moodCode=&quot;EVN&quot;].id" />
      </mapping>
      <mapping>
        <identity value="cda" />
        <map value=".relatedDocument.id" />
      </mapping>
      <mapping>
        <identity value="fhirdocumentreference" />
        <map value="DocumentReference.relatesTo.target" />
      </mapping>
    </element>
    <element id="Composition.event">
      <path value="Composition.event" />
      <short value="문서화된 진료 서비스" />
      <definition value="대장 내시경 검사 혹은 충수 절제술 과 같은 진료 서비스의 문서화를 나타냄." />
      <comment value="원하는 경우 추가 정보를 제공 할 수 있지만 이벤트(event)요소는 type 요소와 일치해야 함" />
      <requirements value="Provides context for the composition and creates a linkage between a resource describing an event and the composition created describing the event." />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Composition.event" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="BackboneElement" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="outboundRelationship[typeCode=&quot;SUBJ&quot;].target[classCode&lt;'ACT']" />
      </mapping>
      <mapping>
        <identity value="cda" />
        <map value=".documentationOf.serviceEvent" />
      </mapping>
      <mapping>
        <identity value="fhirdocumentreference" />
        <map value="DocumentReference.event" />
      </mapping>
    </element>
    <element id="Composition.event.id">
      <path value="Composition.event.id" />
      <representation value="xmlAttr" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.event.extension">
      <path value="Composition.event.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.event.modifierExtension">
      <path value="Composition.event.modifierExtension" />
      <short value="Extensions that cannot be ignored even if unrecognized" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.&#xA;&#xA;Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself)." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <requirements value="Modifier extensions allow for extensions that *cannot* be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored.  This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the [definition of modifier extensions](extensibility.html#modifierExtension)." />
      <alias value="extensions" />
      <alias value="user content" />
      <alias value="modifiers" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="BackboneElement.modifierExtension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <isModifier value="true" />
      <isModifierReason value="Modifier extensions are expected to modify the meaning or interpretation of the element that contains them" />
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.event.code">
      <path value="Composition.event.code" />
      <short value="문서화된 이벤트의 코드" />
      <definition value="해당 코드 목록은 기록 된 대장 내시경 검사 혹은 충수 절제술과 같은 임상적 행위를 나타냄. 특정 경우, 이벤트가 기록된 절차가 typeCode에 내재되어 있음. (예 : 이력 [History] 및 건강검진표 [ Physical Report])" />
      <comment value="event 요소는 &quot;colonoscopy&quot;의 절차를 담은 &quot;Procedure Report&quot; typeCode에 내재된 행위(act)도 전문적으로 다룰 수도 있음. 하나 이상의 eventCodes가 포함된 경우, classCode, practiceSettingCode 또는 typeCode에 내재된 값과 충돌하면 모호한 상황이 발생할 수 있기 때문에 피해야 함. 이 짧은 코드 리스트는 특정 유형의 쿼리를 위한 키워드로 사용됨" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Composition.event.code" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="CodeableConcept" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="DocumentEventType" />
        </extension>
        <strength value="example" />
        <description value="This list of codes represents the main clinical acts being documented." />
        <valueSet value="http://terminology.hl7.org/ValueSet/v3-ActCode" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CE/CNE/CWE" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CD" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept rdfs:subClassOf dt:CD" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value=".code" />
      </mapping>
      <mapping>
        <identity value="cda" />
        <map value=".code" />
      </mapping>
      <mapping>
        <identity value="fhirdocumentreference" />
        <map value="DocumentReference.event.code" />
      </mapping>
    </element>
    <element id="Composition.event.code.id">
      <path value="Composition.event.code.id" />
      <representation value="xmlAttr" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.event.code.extension">
      <path value="Composition.event.code.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.event.code.coding">
      <path value="Composition.event.code.coding" />
      <short value="용어체계(terminology system)에 의해 정의된 코드(code)" />
      <definition value="용어체계(terminology system)에 의해 정의된 코드(code) 참조" />
      <comment value="Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information.  Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true." />
      <requirements value="Allows for alternative encodings within a code system, and translations to other code systems." />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="CodeableConcept.coding" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Coding" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CE/CNE/CWE subset one of the sets of component 1-3 or 4-6" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CV" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding rdfs:subClassOf dt:CDCoding" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.1-8, C*E.10-22" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="union(., ./translation)" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding" />
      </mapping>
    </element>
    <element id="Composition.event.code.coding.id">
      <path value="Composition.event.code.coding.id" />
      <representation value="xmlAttr" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.event.code.coding.extension">
      <path value="Composition.event.code.coding.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.event.code.coding.system">
      <path value="Composition.event.code.coding.system" />
      <short value="용어체계 식별(Identity of terminology system)" />
      <definition value="코드(code)에서 기호(symbol)의 의미를 정의하는 CodeSystem[]를 식별" />
      <comment value="The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...).  OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously." />
      <requirements value="Need to be unambiguous about the source of the definition of the symbol." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.system" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="uri" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.3" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./codeSystem" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem" />
      </mapping>
    </element>
    <element id="Composition.event.code.coding.version">
      <path value="Composition.event.code.coding.version" />
      <short value="해당 시스템의 버전 정보 - 필요한 경우" />
      <definition value="해당 코드(code)를 선택한 시점에 사용된 CodeSystem[]의 버전임. 올바로 관리된 CodeSystem[]은 코드(code)의 의미가 버전과 관계없이 일관적이므로 버전을 보고할 필요가 없음. 그러나 CodeSystem[]의 관리 상태는 지속적으로 보장할 수 없는 부분이며, 코드(code)의 의미가 일관적임을 보장할 수 없는 경우 버전이 교체되어야 함." />
      <comment value="Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.version" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.7" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./codeSystemVersion" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion" />
      </mapping>
    </element>
    <element id="Composition.event.code.coding.code">
      <path value="Composition.event.code.coding.code" />
      <short value="시스템에 정의된 구문(syntax)의 기호(symbol)" />
      <definition value="시스템에 정의된 구문(syntax)의 기호(symbol). 기호(symbol)은 CodeSystem[]에 의해 정의된 구문에서 미리 정의된 코드(code) 또는 표현(expression)일 수 있음. (예: post-coordination)" />
      <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" />
      <requirements value="Need to refer to a particular code in the system." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.code" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="code" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.1" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./code" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code" />
      </mapping>
    </element>
    <element id="Composition.event.code.coding.display">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="Composition.event.code.coding.display" />
      <short value="시스템에 정의된 표기(representation)" />
      <definition value="시스템의 규칙(rules)에 따른, 시스템에서 코드(code)의 의미 표기(representation)" />
      <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" />
      <requirements value="Need to be able to carry a human-readable meaning of the code for readers that do not know  the system." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.display" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.2 - but note this is not well followed" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CV.displayName" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName" />
      </mapping>
    </element>
    <element id="Composition.event.code.coding.userSelected">
      <path value="Composition.event.code.coding.userSelected" />
      <short value="해당 코딩(coding)이 사용자(user)에 의해 직접(directly) 선택되었는지 여부" />
      <definition value="해당 코딩(coding)이 사용자(user)에 의해 직접 선택되었음을 나타냄 - (예) 사용가능한 항목(item)의 선택 목록(list) 중 하나 (코드 또는 디스플레이 )" />
      <comment value="Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely." />
      <requirements value="This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.userSelected" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="boolean" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="Sometimes implied by being first" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CD.codingRationale" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map;   fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [     fhir:source &quot;true&quot;;     fhir:target dt:CDCoding.codingRationale\#O   ]" />
      </mapping>
    </element>
    <element id="Composition.event.code.text">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="Composition.event.code.text" />
      <short value="개념(concept)에 대한 일반 텍스트 표현 (plain text representation)" />
      <definition value="데이터를 입력한 사용자(user)의 입장에서 보거나(seen)/선택하거나(selected)/언급한대로(uttered)의 개념(concept), 혹은 사용자(user)가 의도한 의미를 사람이 사용하는 언어로 표현한 것임." />
      <comment value="Very often the text is the same as a displayName of one of the codings." />
      <requirements value="The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="CodeableConcept.text" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.9. But note many systems use C*E.2 for this" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./originalText[mediaType/code=&quot;text/plain&quot;]/data" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText" />
      </mapping>
    </element>
    <element id="Composition.event.period">
      <path value="Composition.event.period" />
      <short value="문서의 유효 기간" />
      <definition value="이벤트가 문서화 된 기간을 의미함." />
      <comment value="기간(Period)은 시간 범위를 지정함. 사용 컨텍스트(context)는 전체 범위가 적용되는지 (예: &quot;the patient was an inpatient of the hospital for this time range&quot;) 또는 범위에서 하나의 값이 적용되는지 (예:&quot;give to the patient between these two times&quot;) 지정됨. Period는 기간 (경과 시간 측정) 동안 사용되지 않음. [Duration] (datatypes.html # Duration) 참조" />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Composition.event.period" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="Period" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="per-1" />
        <severity value="error" />
        <human value="If present, start SHALL have a lower value than end" />
        <expression value="start.hasValue().not() or end.hasValue().not() or (start &lt;= end)" />
        <xpath value="not(exists(f:start/@value)) or not(exists(f:end/@value)) or (xs:dateTime(f:start/@value) &lt;= xs:dateTime(f:end/@value))" />
        <source value="http://hl7.org/fhir/StructureDefinition/Period" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="DR" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="IVL&lt;TS&gt;[lowClosed=&quot;true&quot; and highClosed=&quot;true&quot;] or URG&lt;TS&gt;[lowClosed=&quot;true&quot; and highClosed=&quot;true&quot;]" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value=".effectiveTime" />
      </mapping>
      <mapping>
        <identity value="cda" />
        <map value=".effectiveTime" />
      </mapping>
      <mapping>
        <identity value="fhirdocumentreference" />
        <map value="DocumentReference.event.period" />
      </mapping>
    </element>
    <element id="Composition.event.period.id">
      <path value="Composition.event.period.id" />
      <representation value="xmlAttr" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.event.period.extension">
      <path value="Composition.event.period.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.event.period.start">
      <path value="Composition.event.period.start" />
      <short value="해당 유효 기간의 시작 시점 (설정된 날짜 포함)" />
      <definition value="해당 유효 기간이 시작되는 시점을 나타냄. 유효 기간은 시작 시점으로 설정된 날짜를 포함함." />
      <comment value="If the low element is missing, the meaning is that the low boundary is not known." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Period.start" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="dateTime" />
      </type>
      <condition value="ele-1" />
      <condition value="per-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="DR.1" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./low" />
      </mapping>
    </element>
    <element id="Composition.event.period.end">
      <path value="Composition.event.period.end" />
      <short value="해당 유효 기간의 종료 시점 (설정된 날짜 포함)" />
      <definition value="기간의 종료. 기간의 종료가 누락된 경우, 인스턴스가 생성될 때 끝이 알려지거나 계획되지 않았음을 의미함. 시작일은 과거일 수 있고 종료일은 미래일 수 있음. 이는 해당 기간이 해당 시간에 종료될 예정임을 의미함" />
      <comment value="The high value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has an end value of 2012-02-03." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Period.end" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="dateTime" />
      </type>
      <meaningWhenMissing value="If the end of the period is missing, it means that the period is ongoing" />
      <condition value="ele-1" />
      <condition value="per-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="DR.2" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./high" />
      </mapping>
    </element>
    <element id="Composition.event.detail">
      <path value="Composition.event.detail" />
      <short value="문서화 되는 이벤트" />
      <definition value="문서화되는 이벤트에 대한 설명 혹은 참조를 나타냄. (예 : 대장 내시경 검사 혹은 충수 절제술을 문서화 하는데 사용 됨.)" />
      <comment value="참조(reference)는 실제 FHIR 리소스(resource)에 대한 참조(reference)여야 하며, 해결이 가능해야 함 (접근 제어 허용, 일시적인 사용 불가능 등). 해결 방법은 URL에서 검색하거나, 리소스 타입(resource type)별로 적용할 수 있는 경우 절대 참조를 표준(Canonical) URL로 간주하고 로컬 레지스트리/저장소에서 검색하여 확인할 수 있음." />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Composition.event.detail" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Reference" />
        <targetProfile value="http://hl7.org/fhir/StructureDefinition/Resource" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ref-1" />
        <severity value="error" />
        <human value="SHALL have a contained resource if a local reference is provided" />
        <expression value="reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))" />
        <xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Reference" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value=".outboundRelationship[typeCode=&quot;SUBJ&quot;].target" />
      </mapping>
      <mapping>
        <identity value="cda" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.event.detail.id">
      <path value="Composition.event.detail.id" />
      <representation value="xmlAttr" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.event.detail.extension">
      <path value="Composition.event.detail.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.event.detail.reference">
      <path value="Composition.event.detail.reference" />
      <short value="문자로 표현된(literal) 참조, 상대적, 내부적 혹은 절대적인 URL" />
      <definition value="다른 리소스(resource)를 찾을 수 있는 위치에 대한 참조를 의미함. 해당 참조는 service base URL에 상대적인(relative) 경우 상대적 참조, 혹은 해당 리소스(resource)를 찾을 수 있는 위치인 절대(absolute) URL일 수 있음. 해당 참조는 버전에 따라 다를 수 있음. 해당 참조가 FHIR RESTful 서버가 아닌 경우, 버전에 따라 다른 것으로 간주함. 내부 구문(Internal Fragment) 참조('#'으로 시작)는 포함되어 있는 리소스(resource)를 참조함." />
      <comment value="Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries.   Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure &quot;/[type]/[id]&quot; then it should be assumed that the reference is to a FHIR RESTful server." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Reference.reference" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <condition value="ref-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.event.detail.type">
      <path value="Composition.event.detail.type" />
      <short value="참조(reference)가 참조(refer)하는 유형(type)  (예. &quot;Patient&quot;)" />
      <definition value="참조 대상의 예상 형식(expected type).  Reference.type과 Reference.reference가 모두 채워지고 Reference.reference가 FHIR URL이면 두가지 모두 일치해야함. 유형(type)은이 참조가 참조하는 유형(type) 인 리소스(resource) 정의의 표준(Canonical) URL임. 참조는 http://hl7.org/fhir/StructureDefinition/과 관련된 URL임. (예) &quot; 환자 &quot; http://hl7.org/fhir/StructureDefinition/Patient에 대한 참조. 절대(absolute) URL은 논리 모델에만 허용됨 (리소스(resource)가 아닌 논리 모델의 참조에서만 사용할 수 있음)." />
      <comment value="This element is used to indicate the type of  the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Reference.type" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="uri" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="FHIRResourceTypeExt" />
        </extension>
        <strength value="extensible" />
        <description value="Aa resource (or, for logical models, the URI of the logical model)." />
        <valueSet value="http://hl7.org/fhir/ValueSet/resource-types" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.event.detail.identifier">
      <path value="Composition.event.detail.identifier" />
      <short value="문자로 표현된(literal) 참조를 알 수 없는 경우 사용하는, 논리적(logical) 참조" />
      <definition value="대상 리소스(resource)의 식별자(identifier). 이것은 다른 리소스(resource)를 직접 참조할 방법이 없을 때 사용- 해당 엔티티(entity)가 FHIR 서버를 통해 사용할 수 없거나  리소스(resource) 작성자가 알려진 식별자(identifier)를 실제 위치로 변활할 방법이 없기 때문에 이 방법이 사용됨. Reference.identifier가 실제로 FHIR 인스턴스로 노출되는 것을 가리킬(point) 필요는 없지만, FHIR 인스턴스로 노출될 것으로 예상되는 비즈니스 개념(concept)을 가리켜야하며, 해당 인스턴스는 참조가 허용되는 FHIR 리소스 타입(resource type)이여야 함." />
      <comment value="When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. &#xA;&#xA;When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference&#xA;&#xA;Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.&#xA;&#xA;Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference.  For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport).  One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any)." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Reference.identifier" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="Identifier" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX / EI (occasionally, more often EI maps to a resource id or a URL)" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs.  Also maps to Role[classCode=IDENT]" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="Identifier" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value=".identifier" />
      </mapping>
    </element>
    <element id="Composition.event.detail.identifier.id">
      <path value="Composition.event.detail.identifier.id" />
      <representation value="xmlAttr" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.event.detail.identifier.extension">
      <path value="Composition.event.detail.identifier.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.event.detail.identifier.use">
      <path value="Composition.event.detail.identifier.use" />
      <short value="usual | official | temp | secondary | old (If known)" />
      <definition value="해당 식별자(identifier)의 목적" />
      <comment value="Applications can assume that an identifier is permanent unless it explicitly says that it is temporary." />
      <requirements value="Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.use" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="code" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isModifier value="true" />
      <isModifierReason value="This is labeled as &quot;Is Modifier&quot; because applications should not mistake a temporary id for a permanent one." />
      <isSummary value="true" />
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="IdentifierUse" />
        </extension>
        <strength value="required" />
        <description value="Identifies the purpose for this identifier, if known ." />
        <valueSet value="http://hl7.org/fhir/ValueSet/identifier-use|4.0.1" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="N/A" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="Role.code or implied by context" />
      </mapping>
    </element>
    <element id="Composition.event.detail.identifier.type">
      <path value="Composition.event.detail.identifier.type" />
      <short value="식별자(identifier)에 대한 설명" />
      <definition value="특정 목적으로 사용되는 식별자(identifier)를 결정하기 위해 사용하는 식별자(identifier)의 코드화된(coded) 유형(type)을 나타냄." />
      <comment value="This element deals only with general categories of identifiers.  It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage.   Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type." />
      <requirements value="Allows users to make use of identifiers when the identifier system is not known." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.type" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="CodeableConcept" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="IdentifierType" />
        </extension>
        <strength value="extensible" />
        <description value="A coded type for an identifier that can be used to determine which identifier to use for a specific purpose." />
        <valueSet value="http://hl7.org/fhir/ValueSet/identifier-type" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CE/CNE/CWE" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CD" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept rdfs:subClassOf dt:CD" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.5" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="Role.code or implied by context" />
      </mapping>
    </element>
    <element id="Composition.event.detail.identifier.type.id">
      <path value="Composition.event.detail.identifier.type.id" />
      <representation value="xmlAttr" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.event.detail.identifier.type.extension">
      <path value="Composition.event.detail.identifier.type.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.event.detail.identifier.type.coding">
      <path value="Composition.event.detail.identifier.type.coding" />
      <short value="용어체계(terminology system)에 의해 정의된 코드(code)" />
      <definition value="용어체계(terminology system)에 의해 정의된 코드(code) 참조" />
      <comment value="Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information.  Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true." />
      <requirements value="Allows for alternative encodings within a code system, and translations to other code systems." />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="CodeableConcept.coding" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Coding" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CE/CNE/CWE subset one of the sets of component 1-3 or 4-6" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CV" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding rdfs:subClassOf dt:CDCoding" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.1-8, C*E.10-22" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="union(., ./translation)" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding" />
      </mapping>
    </element>
    <element id="Composition.event.detail.identifier.type.coding.id">
      <path value="Composition.event.detail.identifier.type.coding.id" />
      <representation value="xmlAttr" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.event.detail.identifier.type.coding.extension">
      <path value="Composition.event.detail.identifier.type.coding.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.event.detail.identifier.type.coding.system">
      <path value="Composition.event.detail.identifier.type.coding.system" />
      <short value="용어체계 식별(Identity of terminology system)" />
      <definition value="코드(code)에서 기호(symbol)의 의미를 정의하는 CodeSystem[]를 식별" />
      <comment value="The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...).  OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously." />
      <requirements value="Need to be unambiguous about the source of the definition of the symbol." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.system" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="uri" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.3" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./codeSystem" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem" />
      </mapping>
    </element>
    <element id="Composition.event.detail.identifier.type.coding.version">
      <path value="Composition.event.detail.identifier.type.coding.version" />
      <short value="해당 시스템의 버전 정보 - 필요한 경우" />
      <definition value="해당 코드(code)를 선택한 시점에 사용된 CodeSystem[]의 버전임. 올바로 관리된 CodeSystem[]은 코드(code)의 의미가 버전과 관계없이 일관적이므로 버전을 보고할 필요가 없음. 그러나 CodeSystem[]의 관리 상태는 지속적으로 보장할 수 없는 부분이며, 코드(code)의 의미가 일관적임을 보장할 수 없는 경우 버전이 교체되어야 함." />
      <comment value="Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.version" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.7" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./codeSystemVersion" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion" />
      </mapping>
    </element>
    <element id="Composition.event.detail.identifier.type.coding.code">
      <path value="Composition.event.detail.identifier.type.coding.code" />
      <short value="시스템에 정의된 구문(syntax)의 기호(symbol)" />
      <definition value="시스템에 정의된 구문(syntax)의 기호(symbol). 기호(symbol)은 CodeSystem[]에 의해 정의된 구문에서 미리 정의된 코드(code) 또는 표현(expression)일 수 있음. (예: post-coordination)" />
      <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" />
      <requirements value="Need to refer to a particular code in the system." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.code" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="code" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.1" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./code" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code" />
      </mapping>
    </element>
    <element id="Composition.event.detail.identifier.type.coding.display">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="Composition.event.detail.identifier.type.coding.display" />
      <short value="시스템에 정의된 표기(representation)" />
      <definition value="시스템의 규칙(rules)에 따른, 시스템에서 코드(code)의 의미 표기(representation)" />
      <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" />
      <requirements value="Need to be able to carry a human-readable meaning of the code for readers that do not know  the system." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.display" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.2 - but note this is not well followed" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CV.displayName" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName" />
      </mapping>
    </element>
    <element id="Composition.event.detail.identifier.type.coding.userSelected">
      <path value="Composition.event.detail.identifier.type.coding.userSelected" />
      <short value="해당 코딩(coding)이 사용자(user)에 의해 직접(directly) 선택되었는지 여부" />
      <definition value="해당 코딩(coding)이 사용자(user)에 의해 직접 선택되었음을 나타냄 - (예) 사용가능한 항목(item)의 선택 목록(list) 중 하나 (코드 또는 디스플레이 )" />
      <comment value="Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely." />
      <requirements value="This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.userSelected" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="boolean" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="Sometimes implied by being first" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CD.codingRationale" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map;   fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [     fhir:source &quot;true&quot;;     fhir:target dt:CDCoding.codingRationale\#O   ]" />
      </mapping>
    </element>
    <element id="Composition.event.detail.identifier.type.text">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="Composition.event.detail.identifier.type.text" />
      <short value="개념(concept)에 대한 일반 텍스트 표현 (plain text representation)" />
      <definition value="데이터를 입력한 사용자(user)의 입장에서 보거나(seen)/선택하거나(selected)/언급한대로(uttered)의 개념(concept), 혹은 사용자(user)가 의도한 의미를 사람이 사용하는 언어로 표현한 것임." />
      <comment value="Very often the text is the same as a displayName of one of the codings." />
      <requirements value="The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="CodeableConcept.text" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.9. But note many systems use C*E.2 for this" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./originalText[mediaType/code=&quot;text/plain&quot;]/data" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText" />
      </mapping>
    </element>
    <element id="Composition.event.detail.identifier.system">
      <path value="Composition.event.detail.identifier.system" />
      <short value="식별자(identifier) 값의 네임스페이스(namespace)" />
      <definition value="설정 값에 대한 네임스페이스 (namespace), 즉 고유(unique)한 설정값을 설명하는 URL을 설정함." />
      <comment value="Identifier.system is always case sensitive." />
      <requirements value="There are many sets  of identifiers.  To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.system" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="uri" />
      </type>
      <example>
        <label value="General" />
        <valueUri value="http://www.acme.com/identifiers/patient" />
      </example>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.4 / EI-2-4" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="II.root or Role.id.root" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="./IdentifierType" />
      </mapping>
    </element>
    <element id="Composition.event.detail.identifier.value">
      <path value="Composition.event.detail.identifier.value" />
      <short value="고유(unique)한 값(value)" />
      <definition value="일반적으로 사용자(user)와 관련(relevant)이 있으며, 시스템 컨텍스트(context) 내에서 고유(unique)한 식별자(identifier)의 일부분임." />
      <comment value="If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986.  The value's primary purpose is computational mapping.  As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.)  A value formatted for human display can be conveyed using the [Rendered Value extension](extension-rendered-value.html). Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.value" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <example>
        <label value="General" />
        <valueString value="123456" />
      </example>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.1 / EI.1" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root)" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="./Value" />
      </mapping>
    </element>
    <element id="Composition.event.detail.identifier.period">
      <path value="Composition.event.detail.identifier.period" />
      <short value="식별자(identifier)의 유효 기간" />
      <definition value="식별자(identifier)가 사용 가능했거나 가능한 기간을 나타냄." />
      <comment value="A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. &quot;the patient was an inpatient of the hospital for this time range&quot;) or one value from the range applies (e.g. &quot;give to the patient between these two times&quot;).&#xA;&#xA;Period is not used for a duration (a measure of elapsed time). See [Duration](datatypes.html#Duration)." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.period" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="Period" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="per-1" />
        <severity value="error" />
        <human value="If present, start SHALL have a lower value than end" />
        <expression value="start.hasValue().not() or end.hasValue().not() or (start &lt;= end)" />
        <xpath value="not(exists(f:start/@value)) or not(exists(f:end/@value)) or (xs:dateTime(f:start/@value) &lt;= xs:dateTime(f:end/@value))" />
        <source value="http://hl7.org/fhir/StructureDefinition/Period" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="DR" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="IVL&lt;TS&gt;[lowClosed=&quot;true&quot; and highClosed=&quot;true&quot;] or URG&lt;TS&gt;[lowClosed=&quot;true&quot; and highClosed=&quot;true&quot;]" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.7 + CX.8" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="Role.effectiveTime or implied by context" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="./StartDate and ./EndDate" />
      </mapping>
    </element>
    <element id="Composition.event.detail.identifier.period.id">
      <path value="Composition.event.detail.identifier.period.id" />
      <representation value="xmlAttr" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.event.detail.identifier.period.extension">
      <path value="Composition.event.detail.identifier.period.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.event.detail.identifier.period.start">
      <path value="Composition.event.detail.identifier.period.start" />
      <short value="해당 유효 기간의 시작 시점 (설정된 날짜 포함)" />
      <definition value="해당 유효 기간이 시작되는 시점을 나타냄. 유효 기간은 시작 시점으로 설정된 날짜를 포함함." />
      <comment value="If the low element is missing, the meaning is that the low boundary is not known." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Period.start" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="dateTime" />
      </type>
      <condition value="ele-1" />
      <condition value="per-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="DR.1" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./low" />
      </mapping>
    </element>
    <element id="Composition.event.detail.identifier.period.end">
      <path value="Composition.event.detail.identifier.period.end" />
      <short value="해당 유효 기간의 종료 시점 (설정된 날짜 포함)" />
      <definition value="기간의 종료. 기간의 종료가 누락된 경우, 인스턴스가 생성될 때 끝이 알려지거나 계획되지 않았음을 의미함. 시작일은 과거일 수 있고 종료일은 미래일 수 있음. 이는 해당 기간이 해당 시간에 종료될 예정임을 의미함" />
      <comment value="The high value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has an end value of 2012-02-03." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Period.end" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="dateTime" />
      </type>
      <meaningWhenMissing value="If the end of the period is missing, it means that the period is ongoing" />
      <condition value="ele-1" />
      <condition value="per-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="DR.2" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./high" />
      </mapping>
    </element>
    <element id="Composition.event.detail.identifier.assigner">
      <path value="Composition.event.detail.identifier.assigner" />
      <short value="식별자(identifier)를 발급한 조직(단순 텍스트 기입 가능)" />
      <definition value="식별자(identifier)를 발급/관리하는 조직(organization)" />
      <comment value="The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.assigner" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="Reference" />
        <targetProfile value="http://hl7.org/fhir/StructureDefinition/Organization" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ref-1" />
        <severity value="error" />
        <human value="SHALL have a contained resource if a local reference is provided" />
        <expression value="reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))" />
        <xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Reference" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.4 / (CX.4,CX.9,CX.10)" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="II.assigningAuthorityName but note that this is an improper use by the definition of the field.  Also Role.scoper" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="./IdentifierIssuingAuthority" />
      </mapping>
    </element>
    <element id="Composition.event.detail.display">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="Composition.event.detail.display" />
      <short value="해당 리소스(resource)에 대한 대체 텍스트(alternative text)" />
      <definition value="리소스(resource) 참조 외에도 리소스(resource)를 식별하기 위한 일반 텍스트 설명임." />
      <comment value="This is generally not the same as the Resource.text of the referenced resource.  The purpose is to identify what's being referenced, not to fully describe it." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Reference.display" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.section">
      <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-explicit-type-name">
        <valueString value="Section" />
      </extension>
      <path value="Composition.section" />
      <short value="구성요소(composition)의 부문 (section)" />
      <definition value="구성요소(composition)를 구성하는 부문 (section)의 경로 (root)를 의미함." />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Composition.section" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="BackboneElement" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="cmp-1" />
        <severity value="error" />
        <human value="A section must contain at least one of text, entries, or sub-sections" />
        <expression value="text.exists() or entry.exists() or section.exists()" />
        <xpath value="exists(f:text) or exists(f:entry) or exists(f:section)" />
        <source value="http://hl7.org/fhir/StructureDefinition/Composition" />
      </constraint>
      <constraint>
        <key value="cmp-2" />
        <severity value="error" />
        <human value="A section can only have an emptyReason if it is empty" />
        <expression value="emptyReason.empty() or entry.empty()" />
        <xpath value="not(exists(f:emptyReason) and exists(f:entry))" />
        <source value="http://hl7.org/fhir/StructureDefinition/Composition" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./outboundRelationship[typeCode=&quot;COMP&quot; and isNormalActRelationship()]/target[moodCode=&quot;EVN&quot; and classCode=&quot;DOCSECT&quot; and isNormalAct]" />
      </mapping>
      <mapping>
        <identity value="cda" />
        <map value=".component.structuredBody.component.section" />
      </mapping>
    </element>
    <element id="Composition.section.id">
      <path value="Composition.section.id" />
      <representation value="xmlAttr" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.section.extension">
      <path value="Composition.section.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.section.modifierExtension">
      <path value="Composition.section.modifierExtension" />
      <short value="Extensions that cannot be ignored even if unrecognized" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.&#xA;&#xA;Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself)." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <requirements value="Modifier extensions allow for extensions that *cannot* be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored.  This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the [definition of modifier extensions](extensibility.html#modifierExtension)." />
      <alias value="extensions" />
      <alias value="user content" />
      <alias value="modifiers" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="BackboneElement.modifierExtension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <isModifier value="true" />
      <isModifierReason value="Modifier extensions are expected to modify the meaning or interpretation of the element that contains them" />
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.section.title">
      <path value="Composition.section.title" />
      <short value="부문(section) 라벨" />
      <definition value="특정 부문(section)의 라벨(label)을 나나탬. 문서에 제시되어 있는 컨텐츠의 일부로 목차를 만드는데 사용됨." />
      <comment value="제목은 사람을 위해 섹션의 식별자로 section.content의 리소스의 서술내용과 일치해야 함. 보통 섹션은 제목이 있어야 하지만 일부 문서에는 불필요하거나 부적절한데 일반적으로 적절하게 구분되는 제목을 가진 하위섹션을 가진 섹션 또는 단일 섹션만 가진 문서 경우이다. 대부분의 구현지침서는 섹션 제목을 필수요소로 하고있음." />
      <requirements value="Section headings are often standardized for different types of documents.  They give guidance to humans on how the document is organized." />
      <alias value="header" />
      <alias value="label" />
      <alias value="caption" />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Composition.section.title" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./title" />
      </mapping>
      <mapping>
        <identity value="cda" />
        <map value=".title" />
      </mapping>
    </element>
    <element id="Composition.section.code">
      <path value="Composition.section.code" />
      <short value="부문(section) 분류 (권장)" />
      <definition value="부문(section) 내에 포함된 컨텐츠의 유형을 식별하는 코드로 부문 제목과 일치 해야 함." />
      <comment value="코드는 문서의 자동화 프로세서 부분에 대한 섹션을 식별함. 이는 프로파일을 사용하여 문서의 구조를 제어할 때 관련이 있음. 섹션에 (하위섹션 대신) 내용(content)가 있을 경우, section.code는 섹션의 내용인 리소스의 의미나 해석을 바꾸지 않음" />
      <requirements value="Provides computable standardized labels to topics within the document." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Composition.section.code" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="CodeableConcept" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="CompositionSectionType" />
        </extension>
        <strength value="example" />
        <description value="Classification of a section of a composition/document." />
        <valueSet value="http://hl7.org/fhir/ValueSet/doc-section-codes" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CE/CNE/CWE" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CD" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept rdfs:subClassOf dt:CD" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./code" />
      </mapping>
      <mapping>
        <identity value="cda" />
        <map value=".code" />
      </mapping>
    </element>
    <element id="Composition.section.code.id">
      <path value="Composition.section.code.id" />
      <representation value="xmlAttr" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.section.code.extension">
      <path value="Composition.section.code.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.section.code.coding">
      <path value="Composition.section.code.coding" />
      <short value="용어체계(terminology system)에 의해 정의된 코드(code)" />
      <definition value="용어체계(terminology system)에 의해 정의된 코드(code) 참조" />
      <comment value="Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information.  Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true." />
      <requirements value="Allows for alternative encodings within a code system, and translations to other code systems." />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="CodeableConcept.coding" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Coding" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CE/CNE/CWE subset one of the sets of component 1-3 or 4-6" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CV" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding rdfs:subClassOf dt:CDCoding" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.1-8, C*E.10-22" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="union(., ./translation)" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding" />
      </mapping>
    </element>
    <element id="Composition.section.code.coding.id">
      <path value="Composition.section.code.coding.id" />
      <representation value="xmlAttr" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.section.code.coding.extension">
      <path value="Composition.section.code.coding.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.section.code.coding.system">
      <path value="Composition.section.code.coding.system" />
      <short value="용어체계 식별(Identity of terminology system)" />
      <definition value="코드(code)에서 기호(symbol)의 의미를 정의하는 CodeSystem[]를 식별" />
      <comment value="The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...).  OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously." />
      <requirements value="Need to be unambiguous about the source of the definition of the symbol." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.system" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="uri" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.3" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./codeSystem" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem" />
      </mapping>
    </element>
    <element id="Composition.section.code.coding.version">
      <path value="Composition.section.code.coding.version" />
      <short value="해당 시스템의 버전 정보 - 필요한 경우" />
      <definition value="해당 코드(code)를 선택한 시점에 사용된 CodeSystem[]의 버전임. 올바로 관리된 CodeSystem[]은 코드(code)의 의미가 버전과 관계없이 일관적이므로 버전을 보고할 필요가 없음. 그러나 CodeSystem[]의 관리 상태는 지속적으로 보장할 수 없는 부분이며, 코드(code)의 의미가 일관적임을 보장할 수 없는 경우 버전이 교체되어야 함." />
      <comment value="Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.version" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.7" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./codeSystemVersion" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion" />
      </mapping>
    </element>
    <element id="Composition.section.code.coding.code">
      <path value="Composition.section.code.coding.code" />
      <short value="시스템에 정의된 구문(syntax)의 기호(symbol)" />
      <definition value="시스템에 정의된 구문(syntax)의 기호(symbol). 기호(symbol)은 CodeSystem[]에 의해 정의된 구문에서 미리 정의된 코드(code) 또는 표현(expression)일 수 있음. (예: post-coordination)" />
      <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" />
      <requirements value="Need to refer to a particular code in the system." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.code" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="code" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.1" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./code" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code" />
      </mapping>
    </element>
    <element id="Composition.section.code.coding.display">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="Composition.section.code.coding.display" />
      <short value="시스템에 정의된 표기(representation)" />
      <definition value="시스템의 규칙(rules)에 따른, 시스템에서 코드(code)의 의미 표기(representation)" />
      <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" />
      <requirements value="Need to be able to carry a human-readable meaning of the code for readers that do not know  the system." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.display" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.2 - but note this is not well followed" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CV.displayName" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName" />
      </mapping>
    </element>
    <element id="Composition.section.code.coding.userSelected">
      <path value="Composition.section.code.coding.userSelected" />
      <short value="해당 코딩(coding)이 사용자(user)에 의해 직접(directly) 선택되었는지 여부" />
      <definition value="해당 코딩(coding)이 사용자(user)에 의해 직접 선택되었음을 나타냄 - (예) 사용가능한 항목(item)의 선택 목록(list) 중 하나 (코드 또는 디스플레이 )" />
      <comment value="Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely." />
      <requirements value="This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.userSelected" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="boolean" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="Sometimes implied by being first" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CD.codingRationale" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map;   fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [     fhir:source &quot;true&quot;;     fhir:target dt:CDCoding.codingRationale\#O   ]" />
      </mapping>
    </element>
    <element id="Composition.section.code.text">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="Composition.section.code.text" />
      <short value="개념(concept)에 대한 일반 텍스트 표현 (plain text representation)" />
      <definition value="데이터를 입력한 사용자(user)의 입장에서 보거나(seen)/선택하거나(selected)/언급한대로(uttered)의 개념(concept), 혹은 사용자(user)가 의도한 의미를 사람이 사용하는 언어로 표현한 것임." />
      <comment value="Very often the text is the same as a displayName of one of the codings." />
      <requirements value="The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="CodeableConcept.text" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.9. But note many systems use C*E.2 for this" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./originalText[mediaType/code=&quot;text/plain&quot;]/data" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText" />
      </mapping>
    </element>
    <element id="Composition.section.author">
      <path value="Composition.section.author" />
      <short value="누가 그리고 무슨 부문(section)을 작성했는지" />
      <definition value="이 섹션에 대해 입력한 사람이 아닌 해당 정보에 대한 책임자를 식별함" />
      <comment value="참조(reference)는 실제 FHIR 리소스(resource)에 대한 참조(reference)여야 하며, 해결이 가능해야 함 (접근 제어 허용, 일시적인 사용 불가능 등). 해결 방법은 URL에서 검색하거나, 리소스 타입(resource type)별로 적용할 수 있는 경우 절대 참조를 표준(Canonical) URL로 간주하고 로컬 레지스트리/저장소에서 검색하여 확인할 수 있음." />
      <requirements value="Identifies who is responsible for the content." />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Composition.section.author" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Reference" />
        <targetProfile value="http://hl7.org/fhir/StructureDefinition/Practitioner" />
        <targetProfile value="http://hl7.org/fhir/StructureDefinition/PractitionerRole" />
        <targetProfile value="http://hl7.org/fhir/StructureDefinition/Device" />
        <targetProfile value="http://hl7.org/fhir/StructureDefinition/Patient" />
        <targetProfile value="http://hl7.org/fhir/StructureDefinition/RelatedPerson" />
        <targetProfile value="http://hl7.org/fhir/StructureDefinition/Organization" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ref-1" />
        <severity value="error" />
        <human value="SHALL have a contained resource if a local reference is provided" />
        <expression value="reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))" />
        <xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Reference" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" />
      </mapping>
      <mapping>
        <identity value="w5" />
        <map value="FiveWs.author" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value=".participation[typeCode=&quot;AUT&quot;].role[classCode=&quot;ASSIGNED&quot;]" />
      </mapping>
      <mapping>
        <identity value="cda" />
        <map value=".author.assignedAuthor" />
      </mapping>
    </element>
    <element id="Composition.section.author.id">
      <path value="Composition.section.author.id" />
      <representation value="xmlAttr" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.section.author.extension">
      <path value="Composition.section.author.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.section.author.reference">
      <path value="Composition.section.author.reference" />
      <short value="문자로 표현된(literal) 참조, 상대적, 내부적 혹은 절대적인 URL" />
      <definition value="다른 리소스(resource)를 찾을 수 있는 위치에 대한 참조를 의미함. 해당 참조는 service base URL에 상대적인(relative) 경우 상대적 참조, 혹은 해당 리소스(resource)를 찾을 수 있는 위치인 절대(absolute) URL일 수 있음. 해당 참조는 버전에 따라 다를 수 있음. 해당 참조가 FHIR RESTful 서버가 아닌 경우, 버전에 따라 다른 것으로 간주함. 내부 구문(Internal Fragment) 참조('#'으로 시작)는 포함되어 있는 리소스(resource)를 참조함." />
      <comment value="Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries.   Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure &quot;/[type]/[id]&quot; then it should be assumed that the reference is to a FHIR RESTful server." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Reference.reference" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <condition value="ref-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.section.author.type">
      <path value="Composition.section.author.type" />
      <short value="참조(reference)가 참조(refer)하는 유형(type)  (예. &quot;Patient&quot;)" />
      <definition value="참조 대상의 예상 형식(expected type).  Reference.type과 Reference.reference가 모두 채워지고 Reference.reference가 FHIR URL이면 두가지 모두 일치해야함. 유형(type)은이 참조가 참조하는 유형(type) 인 리소스(resource) 정의의 표준(Canonical) URL임. 참조는 http://hl7.org/fhir/StructureDefinition/과 관련된 URL임. (예) &quot; 환자 &quot; http://hl7.org/fhir/StructureDefinition/Patient에 대한 참조. 절대(absolute) URL은 논리 모델에만 허용됨 (리소스(resource)가 아닌 논리 모델의 참조에서만 사용할 수 있음)." />
      <comment value="This element is used to indicate the type of  the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Reference.type" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="uri" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="FHIRResourceTypeExt" />
        </extension>
        <strength value="extensible" />
        <description value="Aa resource (or, for logical models, the URI of the logical model)." />
        <valueSet value="http://hl7.org/fhir/ValueSet/resource-types" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.section.author.identifier">
      <path value="Composition.section.author.identifier" />
      <short value="문자로 표현된(literal) 참조를 알 수 없는 경우 사용하는, 논리적(logical) 참조" />
      <definition value="대상 리소스(resource)의 식별자(identifier). 이것은 다른 리소스(resource)를 직접 참조할 방법이 없을 때 사용- 해당 엔티티(entity)가 FHIR 서버를 통해 사용할 수 없거나  리소스(resource) 작성자가 알려진 식별자(identifier)를 실제 위치로 변활할 방법이 없기 때문에 이 방법이 사용됨. Reference.identifier가 실제로 FHIR 인스턴스로 노출되는 것을 가리킬(point) 필요는 없지만, FHIR 인스턴스로 노출될 것으로 예상되는 비즈니스 개념(concept)을 가리켜야하며, 해당 인스턴스는 참조가 허용되는 FHIR 리소스 타입(resource type)이여야 함." />
      <comment value="When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. &#xA;&#xA;When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference&#xA;&#xA;Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.&#xA;&#xA;Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference.  For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport).  One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any)." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Reference.identifier" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="Identifier" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX / EI (occasionally, more often EI maps to a resource id or a URL)" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs.  Also maps to Role[classCode=IDENT]" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="Identifier" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value=".identifier" />
      </mapping>
    </element>
    <element id="Composition.section.author.identifier.id">
      <path value="Composition.section.author.identifier.id" />
      <representation value="xmlAttr" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.section.author.identifier.extension">
      <path value="Composition.section.author.identifier.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.section.author.identifier.use">
      <path value="Composition.section.author.identifier.use" />
      <short value="usual | official | temp | secondary | old (If known)" />
      <definition value="해당 식별자(identifier)의 목적" />
      <comment value="Applications can assume that an identifier is permanent unless it explicitly says that it is temporary." />
      <requirements value="Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.use" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="code" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isModifier value="true" />
      <isModifierReason value="This is labeled as &quot;Is Modifier&quot; because applications should not mistake a temporary id for a permanent one." />
      <isSummary value="true" />
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="IdentifierUse" />
        </extension>
        <strength value="required" />
        <description value="Identifies the purpose for this identifier, if known ." />
        <valueSet value="http://hl7.org/fhir/ValueSet/identifier-use|4.0.1" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="N/A" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="Role.code or implied by context" />
      </mapping>
    </element>
    <element id="Composition.section.author.identifier.type">
      <path value="Composition.section.author.identifier.type" />
      <short value="식별자(identifier)에 대한 설명" />
      <definition value="특정 목적으로 사용되는 식별자(identifier)를 결정하기 위해 사용하는 식별자(identifier)의 코드화된(coded) 유형(type)을 나타냄." />
      <comment value="This element deals only with general categories of identifiers.  It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage.   Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type." />
      <requirements value="Allows users to make use of identifiers when the identifier system is not known." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.type" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="CodeableConcept" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="IdentifierType" />
        </extension>
        <strength value="extensible" />
        <description value="A coded type for an identifier that can be used to determine which identifier to use for a specific purpose." />
        <valueSet value="http://hl7.org/fhir/ValueSet/identifier-type" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CE/CNE/CWE" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CD" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept rdfs:subClassOf dt:CD" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.5" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="Role.code or implied by context" />
      </mapping>
    </element>
    <element id="Composition.section.author.identifier.type.id">
      <path value="Composition.section.author.identifier.type.id" />
      <representation value="xmlAttr" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.section.author.identifier.type.extension">
      <path value="Composition.section.author.identifier.type.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.section.author.identifier.type.coding">
      <path value="Composition.section.author.identifier.type.coding" />
      <short value="용어체계(terminology system)에 의해 정의된 코드(code)" />
      <definition value="용어체계(terminology system)에 의해 정의된 코드(code) 참조" />
      <comment value="Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information.  Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true." />
      <requirements value="Allows for alternative encodings within a code system, and translations to other code systems." />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="CodeableConcept.coding" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Coding" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CE/CNE/CWE subset one of the sets of component 1-3 or 4-6" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CV" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding rdfs:subClassOf dt:CDCoding" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.1-8, C*E.10-22" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="union(., ./translation)" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding" />
      </mapping>
    </element>
    <element id="Composition.section.author.identifier.type.coding.id">
      <path value="Composition.section.author.identifier.type.coding.id" />
      <representation value="xmlAttr" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.section.author.identifier.type.coding.extension">
      <path value="Composition.section.author.identifier.type.coding.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.section.author.identifier.type.coding.system">
      <path value="Composition.section.author.identifier.type.coding.system" />
      <short value="용어체계 식별(Identity of terminology system)" />
      <definition value="코드(code)에서 기호(symbol)의 의미를 정의하는 CodeSystem[]를 식별" />
      <comment value="The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...).  OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously." />
      <requirements value="Need to be unambiguous about the source of the definition of the symbol." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.system" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="uri" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.3" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./codeSystem" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem" />
      </mapping>
    </element>
    <element id="Composition.section.author.identifier.type.coding.version">
      <path value="Composition.section.author.identifier.type.coding.version" />
      <short value="해당 시스템의 버전 정보 - 필요한 경우" />
      <definition value="해당 코드(code)를 선택한 시점에 사용된 CodeSystem[]의 버전임. 올바로 관리된 CodeSystem[]은 코드(code)의 의미가 버전과 관계없이 일관적이므로 버전을 보고할 필요가 없음. 그러나 CodeSystem[]의 관리 상태는 지속적으로 보장할 수 없는 부분이며, 코드(code)의 의미가 일관적임을 보장할 수 없는 경우 버전이 교체되어야 함." />
      <comment value="Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.version" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.7" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./codeSystemVersion" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion" />
      </mapping>
    </element>
    <element id="Composition.section.author.identifier.type.coding.code">
      <path value="Composition.section.author.identifier.type.coding.code" />
      <short value="시스템에 정의된 구문(syntax)의 기호(symbol)" />
      <definition value="시스템에 정의된 구문(syntax)의 기호(symbol). 기호(symbol)은 CodeSystem[]에 의해 정의된 구문에서 미리 정의된 코드(code) 또는 표현(expression)일 수 있음. (예: post-coordination)" />
      <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" />
      <requirements value="Need to refer to a particular code in the system." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.code" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="code" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.1" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./code" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code" />
      </mapping>
    </element>
    <element id="Composition.section.author.identifier.type.coding.display">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="Composition.section.author.identifier.type.coding.display" />
      <short value="시스템에 정의된 표기(representation)" />
      <definition value="시스템의 규칙(rules)에 따른, 시스템에서 코드(code)의 의미 표기(representation)" />
      <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" />
      <requirements value="Need to be able to carry a human-readable meaning of the code for readers that do not know  the system." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.display" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.2 - but note this is not well followed" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CV.displayName" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName" />
      </mapping>
    </element>
    <element id="Composition.section.author.identifier.type.coding.userSelected">
      <path value="Composition.section.author.identifier.type.coding.userSelected" />
      <short value="해당 코딩(coding)이 사용자(user)에 의해 직접(directly) 선택되었는지 여부" />
      <definition value="해당 코딩(coding)이 사용자(user)에 의해 직접 선택되었음을 나타냄 - (예) 사용가능한 항목(item)의 선택 목록(list) 중 하나 (코드 또는 디스플레이 )" />
      <comment value="Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely." />
      <requirements value="This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.userSelected" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="boolean" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="Sometimes implied by being first" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CD.codingRationale" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map;   fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [     fhir:source &quot;true&quot;;     fhir:target dt:CDCoding.codingRationale\#O   ]" />
      </mapping>
    </element>
    <element id="Composition.section.author.identifier.type.text">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="Composition.section.author.identifier.type.text" />
      <short value="개념(concept)에 대한 일반 텍스트 표현 (plain text representation)" />
      <definition value="데이터를 입력한 사용자(user)의 입장에서 보거나(seen)/선택하거나(selected)/언급한대로(uttered)의 개념(concept), 혹은 사용자(user)가 의도한 의미를 사람이 사용하는 언어로 표현한 것임." />
      <comment value="Very often the text is the same as a displayName of one of the codings." />
      <requirements value="The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="CodeableConcept.text" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.9. But note many systems use C*E.2 for this" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./originalText[mediaType/code=&quot;text/plain&quot;]/data" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText" />
      </mapping>
    </element>
    <element id="Composition.section.author.identifier.system">
      <path value="Composition.section.author.identifier.system" />
      <short value="식별자(identifier) 값의 네임스페이스(namespace)" />
      <definition value="설정 값에 대한 네임스페이스 (namespace), 즉 고유(unique)한 설정값을 설명하는 URL을 설정함." />
      <comment value="Identifier.system is always case sensitive." />
      <requirements value="There are many sets  of identifiers.  To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.system" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="uri" />
      </type>
      <example>
        <label value="General" />
        <valueUri value="http://www.acme.com/identifiers/patient" />
      </example>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.4 / EI-2-4" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="II.root or Role.id.root" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="./IdentifierType" />
      </mapping>
    </element>
    <element id="Composition.section.author.identifier.value">
      <path value="Composition.section.author.identifier.value" />
      <short value="고유(unique)한 값(value)" />
      <definition value="일반적으로 사용자(user)와 관련(relevant)이 있으며, 시스템 컨텍스트(context) 내에서 고유(unique)한 식별자(identifier)의 일부분임." />
      <comment value="If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986.  The value's primary purpose is computational mapping.  As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.)  A value formatted for human display can be conveyed using the [Rendered Value extension](extension-rendered-value.html). Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.value" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <example>
        <label value="General" />
        <valueString value="123456" />
      </example>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.1 / EI.1" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root)" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="./Value" />
      </mapping>
    </element>
    <element id="Composition.section.author.identifier.period">
      <path value="Composition.section.author.identifier.period" />
      <short value="식별자(identifier)의 유효 기간" />
      <definition value="식별자(identifier)가 사용 가능했거나 가능한 기간을 나타냄." />
      <comment value="A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. &quot;the patient was an inpatient of the hospital for this time range&quot;) or one value from the range applies (e.g. &quot;give to the patient between these two times&quot;).&#xA;&#xA;Period is not used for a duration (a measure of elapsed time). See [Duration](datatypes.html#Duration)." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.period" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="Period" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="per-1" />
        <severity value="error" />
        <human value="If present, start SHALL have a lower value than end" />
        <expression value="start.hasValue().not() or end.hasValue().not() or (start &lt;= end)" />
        <xpath value="not(exists(f:start/@value)) or not(exists(f:end/@value)) or (xs:dateTime(f:start/@value) &lt;= xs:dateTime(f:end/@value))" />
        <source value="http://hl7.org/fhir/StructureDefinition/Period" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="DR" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="IVL&lt;TS&gt;[lowClosed=&quot;true&quot; and highClosed=&quot;true&quot;] or URG&lt;TS&gt;[lowClosed=&quot;true&quot; and highClosed=&quot;true&quot;]" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.7 + CX.8" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="Role.effectiveTime or implied by context" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="./StartDate and ./EndDate" />
      </mapping>
    </element>
    <element id="Composition.section.author.identifier.period.id">
      <path value="Composition.section.author.identifier.period.id" />
      <representation value="xmlAttr" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.section.author.identifier.period.extension">
      <path value="Composition.section.author.identifier.period.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.section.author.identifier.period.start">
      <path value="Composition.section.author.identifier.period.start" />
      <short value="해당 유효 기간의 시작 시점 (설정된 날짜 포함)" />
      <definition value="해당 유효 기간이 시작되는 시점을 나타냄. 유효 기간은 시작 시점으로 설정된 날짜를 포함함." />
      <comment value="If the low element is missing, the meaning is that the low boundary is not known." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Period.start" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="dateTime" />
      </type>
      <condition value="ele-1" />
      <condition value="per-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="DR.1" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./low" />
      </mapping>
    </element>
    <element id="Composition.section.author.identifier.period.end">
      <path value="Composition.section.author.identifier.period.end" />
      <short value="해당 유효 기간의 종료 시점 (설정된 날짜 포함)" />
      <definition value="기간의 종료. 기간의 종료가 누락된 경우, 인스턴스가 생성될 때 끝이 알려지거나 계획되지 않았음을 의미함. 시작일은 과거일 수 있고 종료일은 미래일 수 있음. 이는 해당 기간이 해당 시간에 종료될 예정임을 의미함" />
      <comment value="The high value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has an end value of 2012-02-03." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Period.end" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="dateTime" />
      </type>
      <meaningWhenMissing value="If the end of the period is missing, it means that the period is ongoing" />
      <condition value="ele-1" />
      <condition value="per-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="DR.2" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./high" />
      </mapping>
    </element>
    <element id="Composition.section.author.identifier.assigner">
      <path value="Composition.section.author.identifier.assigner" />
      <short value="식별자(identifier)를 발급한 조직(단순 텍스트 기입 가능)" />
      <definition value="식별자(identifier)를 발급/관리하는 조직(organization)" />
      <comment value="The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.assigner" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="Reference" />
        <targetProfile value="http://hl7.org/fhir/StructureDefinition/Organization" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ref-1" />
        <severity value="error" />
        <human value="SHALL have a contained resource if a local reference is provided" />
        <expression value="reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))" />
        <xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Reference" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.4 / (CX.4,CX.9,CX.10)" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="II.assigningAuthorityName but note that this is an improper use by the definition of the field.  Also Role.scoper" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="./IdentifierIssuingAuthority" />
      </mapping>
    </element>
    <element id="Composition.section.author.display">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="Composition.section.author.display" />
      <short value="해당 리소스(resource)에 대한 대체 텍스트(alternative text)" />
      <definition value="리소스(resource) 참조 외에도 리소스(resource)를 식별하기 위한 일반 텍스트 설명임." />
      <comment value="This is generally not the same as the Resource.text of the referenced resource.  The purpose is to identify what's being referenced, not to fully describe it." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Reference.display" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.section.focus">
      <path value="Composition.section.focus" />
      <short value="Composition[]의 주제에 관한 것 아닐 때, 섹션이 누구/무엇에 관한 것인지에 관한 내용" />
      <definition value="Composition[]의 대상은 아니면서, (환자 대상의 경우) 배우자, 부모, 태아 또는 기증자와 같이 주제와 관련된 어떤것 또는 누군가를 나타낼 때 섹션의 실제 초점을 나타냄. focus항목이 지정되지 않을경우, focus는 parent 섹션의 focus 또는 Composition[] 자신을 대상으로 함. focus를 포함한 섹션은 논리적 subject(환자, 환자, 주제, 포커스 등)가 섹션 focus와 일치하는 리소스 또는 논리적 subject(일부 리소스)가 없는 리소스를 포함해야 함." />
      <comment value="보통 문서의 섹션은 document의 환자, 환자그룹, 위치, 또는 기기(device) 등의 문서주제에 관련된 것임. 어떤 문서는 실제로 엔터티에 관련한 데이터가 포함되어 있음. 전형적인 예로, 산모와 관련된 신생아 퇴원 요약서 또는 가족구성원이 포함된 가족력 문서 등 많은 예가 있음" />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Composition.section.focus" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="Reference" />
        <targetProfile value="http://hl7.org/fhir/StructureDefinition/Resource" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ref-1" />
        <severity value="error" />
        <human value="SHALL have a contained resource if a local reference is provided" />
        <expression value="reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))" />
        <xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Reference" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" />
      </mapping>
      <mapping>
        <identity value="cda" />
        <map value=".subject? (CDA did not differentiate between subject and focus)" />
      </mapping>
    </element>
    <element id="Composition.section.focus.id">
      <path value="Composition.section.focus.id" />
      <representation value="xmlAttr" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.section.focus.extension">
      <path value="Composition.section.focus.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.section.focus.reference">
      <path value="Composition.section.focus.reference" />
      <short value="문자로 표현된(literal) 참조, 상대적, 내부적 혹은 절대적인 URL" />
      <definition value="다른 리소스(resource)를 찾을 수 있는 위치에 대한 참조를 의미함. 해당 참조는 service base URL에 상대적인(relative) 경우 상대적 참조, 혹은 해당 리소스(resource)를 찾을 수 있는 위치인 절대(absolute) URL일 수 있음. 해당 참조는 버전에 따라 다를 수 있음. 해당 참조가 FHIR RESTful 서버가 아닌 경우, 버전에 따라 다른 것으로 간주함. 내부 구문(Internal Fragment) 참조('#'으로 시작)는 포함되어 있는 리소스(resource)를 참조함." />
      <comment value="Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries.   Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure &quot;/[type]/[id]&quot; then it should be assumed that the reference is to a FHIR RESTful server." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Reference.reference" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <condition value="ref-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.section.focus.type">
      <path value="Composition.section.focus.type" />
      <short value="참조(reference)가 참조(refer)하는 유형(type)  (예. &quot;Patient&quot;)" />
      <definition value="참조 대상의 예상 형식(expected type).  Reference.type과 Reference.reference가 모두 채워지고 Reference.reference가 FHIR URL이면 두가지 모두 일치해야함. 유형(type)은이 참조가 참조하는 유형(type) 인 리소스(resource) 정의의 표준(Canonical) URL임. 참조는 http://hl7.org/fhir/StructureDefinition/과 관련된 URL임. (예) &quot; 환자 &quot; http://hl7.org/fhir/StructureDefinition/Patient에 대한 참조. 절대(absolute) URL은 논리 모델에만 허용됨 (리소스(resource)가 아닌 논리 모델의 참조에서만 사용할 수 있음)." />
      <comment value="This element is used to indicate the type of  the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Reference.type" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="uri" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="FHIRResourceTypeExt" />
        </extension>
        <strength value="extensible" />
        <description value="Aa resource (or, for logical models, the URI of the logical model)." />
        <valueSet value="http://hl7.org/fhir/ValueSet/resource-types" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.section.focus.identifier">
      <path value="Composition.section.focus.identifier" />
      <short value="문자로 표현된(literal) 참조를 알 수 없는 경우 사용하는, 논리적(logical) 참조" />
      <definition value="대상 리소스(resource)의 식별자(identifier). 이것은 다른 리소스(resource)를 직접 참조할 방법이 없을 때 사용- 해당 엔티티(entity)가 FHIR 서버를 통해 사용할 수 없거나  리소스(resource) 작성자가 알려진 식별자(identifier)를 실제 위치로 변활할 방법이 없기 때문에 이 방법이 사용됨. Reference.identifier가 실제로 FHIR 인스턴스로 노출되는 것을 가리킬(point) 필요는 없지만, FHIR 인스턴스로 노출될 것으로 예상되는 비즈니스 개념(concept)을 가리켜야하며, 해당 인스턴스는 참조가 허용되는 FHIR 리소스 타입(resource type)이여야 함." />
      <comment value="When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. &#xA;&#xA;When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference&#xA;&#xA;Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.&#xA;&#xA;Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference.  For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport).  One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any)." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Reference.identifier" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="Identifier" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX / EI (occasionally, more often EI maps to a resource id or a URL)" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs.  Also maps to Role[classCode=IDENT]" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="Identifier" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value=".identifier" />
      </mapping>
    </element>
    <element id="Composition.section.focus.identifier.id">
      <path value="Composition.section.focus.identifier.id" />
      <representation value="xmlAttr" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.section.focus.identifier.extension">
      <path value="Composition.section.focus.identifier.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.section.focus.identifier.use">
      <path value="Composition.section.focus.identifier.use" />
      <short value="usual | official | temp | secondary | old (If known)" />
      <definition value="해당 식별자(identifier)의 목적" />
      <comment value="Applications can assume that an identifier is permanent unless it explicitly says that it is temporary." />
      <requirements value="Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.use" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="code" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isModifier value="true" />
      <isModifierReason value="This is labeled as &quot;Is Modifier&quot; because applications should not mistake a temporary id for a permanent one." />
      <isSummary value="true" />
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="IdentifierUse" />
        </extension>
        <strength value="required" />
        <description value="Identifies the purpose for this identifier, if known ." />
        <valueSet value="http://hl7.org/fhir/ValueSet/identifier-use|4.0.1" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="N/A" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="Role.code or implied by context" />
      </mapping>
    </element>
    <element id="Composition.section.focus.identifier.type">
      <path value="Composition.section.focus.identifier.type" />
      <short value="식별자(identifier)에 대한 설명" />
      <definition value="특정 목적으로 사용되는 식별자(identifier)를 결정하기 위해 사용하는 식별자(identifier)의 코드화된(coded) 유형(type)을 나타냄." />
      <comment value="This element deals only with general categories of identifiers.  It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage.   Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type." />
      <requirements value="Allows users to make use of identifiers when the identifier system is not known." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.type" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="CodeableConcept" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="IdentifierType" />
        </extension>
        <strength value="extensible" />
        <description value="A coded type for an identifier that can be used to determine which identifier to use for a specific purpose." />
        <valueSet value="http://hl7.org/fhir/ValueSet/identifier-type" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CE/CNE/CWE" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CD" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept rdfs:subClassOf dt:CD" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.5" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="Role.code or implied by context" />
      </mapping>
    </element>
    <element id="Composition.section.focus.identifier.type.id">
      <path value="Composition.section.focus.identifier.type.id" />
      <representation value="xmlAttr" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.section.focus.identifier.type.extension">
      <path value="Composition.section.focus.identifier.type.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.section.focus.identifier.type.coding">
      <path value="Composition.section.focus.identifier.type.coding" />
      <short value="용어체계(terminology system)에 의해 정의된 코드(code)" />
      <definition value="용어체계(terminology system)에 의해 정의된 코드(code) 참조" />
      <comment value="Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information.  Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true." />
      <requirements value="Allows for alternative encodings within a code system, and translations to other code systems." />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="CodeableConcept.coding" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Coding" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CE/CNE/CWE subset one of the sets of component 1-3 or 4-6" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CV" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding rdfs:subClassOf dt:CDCoding" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.1-8, C*E.10-22" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="union(., ./translation)" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding" />
      </mapping>
    </element>
    <element id="Composition.section.focus.identifier.type.coding.id">
      <path value="Composition.section.focus.identifier.type.coding.id" />
      <representation value="xmlAttr" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.section.focus.identifier.type.coding.extension">
      <path value="Composition.section.focus.identifier.type.coding.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.section.focus.identifier.type.coding.system">
      <path value="Composition.section.focus.identifier.type.coding.system" />
      <short value="용어체계 식별(Identity of terminology system)" />
      <definition value="코드(code)에서 기호(symbol)의 의미를 정의하는 CodeSystem[]를 식별" />
      <comment value="The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...).  OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously." />
      <requirements value="Need to be unambiguous about the source of the definition of the symbol." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.system" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="uri" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.3" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./codeSystem" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem" />
      </mapping>
    </element>
    <element id="Composition.section.focus.identifier.type.coding.version">
      <path value="Composition.section.focus.identifier.type.coding.version" />
      <short value="해당 시스템의 버전 정보 - 필요한 경우" />
      <definition value="해당 코드(code)를 선택한 시점에 사용된 CodeSystem[]의 버전임. 올바로 관리된 CodeSystem[]은 코드(code)의 의미가 버전과 관계없이 일관적이므로 버전을 보고할 필요가 없음. 그러나 CodeSystem[]의 관리 상태는 지속적으로 보장할 수 없는 부분이며, 코드(code)의 의미가 일관적임을 보장할 수 없는 경우 버전이 교체되어야 함." />
      <comment value="Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.version" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.7" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./codeSystemVersion" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion" />
      </mapping>
    </element>
    <element id="Composition.section.focus.identifier.type.coding.code">
      <path value="Composition.section.focus.identifier.type.coding.code" />
      <short value="시스템에 정의된 구문(syntax)의 기호(symbol)" />
      <definition value="시스템에 정의된 구문(syntax)의 기호(symbol). 기호(symbol)은 CodeSystem[]에 의해 정의된 구문에서 미리 정의된 코드(code) 또는 표현(expression)일 수 있음. (예: post-coordination)" />
      <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" />
      <requirements value="Need to refer to a particular code in the system." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.code" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="code" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.1" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./code" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code" />
      </mapping>
    </element>
    <element id="Composition.section.focus.identifier.type.coding.display">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="Composition.section.focus.identifier.type.coding.display" />
      <short value="시스템에 정의된 표기(representation)" />
      <definition value="시스템의 규칙(rules)에 따른, 시스템에서 코드(code)의 의미 표기(representation)" />
      <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" />
      <requirements value="Need to be able to carry a human-readable meaning of the code for readers that do not know  the system." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.display" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.2 - but note this is not well followed" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CV.displayName" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName" />
      </mapping>
    </element>
    <element id="Composition.section.focus.identifier.type.coding.userSelected">
      <path value="Composition.section.focus.identifier.type.coding.userSelected" />
      <short value="해당 코딩(coding)이 사용자(user)에 의해 직접(directly) 선택되었는지 여부" />
      <definition value="해당 코딩(coding)이 사용자(user)에 의해 직접 선택되었음을 나타냄 - (예) 사용가능한 항목(item)의 선택 목록(list) 중 하나 (코드 또는 디스플레이 )" />
      <comment value="Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely." />
      <requirements value="This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.userSelected" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="boolean" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="Sometimes implied by being first" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CD.codingRationale" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map;   fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [     fhir:source &quot;true&quot;;     fhir:target dt:CDCoding.codingRationale\#O   ]" />
      </mapping>
    </element>
    <element id="Composition.section.focus.identifier.type.text">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="Composition.section.focus.identifier.type.text" />
      <short value="개념(concept)에 대한 일반 텍스트 표현 (plain text representation)" />
      <definition value="데이터를 입력한 사용자(user)의 입장에서 보거나(seen)/선택하거나(selected)/언급한대로(uttered)의 개념(concept), 혹은 사용자(user)가 의도한 의미를 사람이 사용하는 언어로 표현한 것임." />
      <comment value="Very often the text is the same as a displayName of one of the codings." />
      <requirements value="The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="CodeableConcept.text" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.9. But note many systems use C*E.2 for this" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./originalText[mediaType/code=&quot;text/plain&quot;]/data" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText" />
      </mapping>
    </element>
    <element id="Composition.section.focus.identifier.system">
      <path value="Composition.section.focus.identifier.system" />
      <short value="식별자(identifier) 값의 네임스페이스(namespace)" />
      <definition value="설정 값에 대한 네임스페이스 (namespace), 즉 고유(unique)한 설정값을 설명하는 URL을 설정함." />
      <comment value="Identifier.system is always case sensitive." />
      <requirements value="There are many sets  of identifiers.  To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.system" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="uri" />
      </type>
      <example>
        <label value="General" />
        <valueUri value="http://www.acme.com/identifiers/patient" />
      </example>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.4 / EI-2-4" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="II.root or Role.id.root" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="./IdentifierType" />
      </mapping>
    </element>
    <element id="Composition.section.focus.identifier.value">
      <path value="Composition.section.focus.identifier.value" />
      <short value="고유(unique)한 값(value)" />
      <definition value="일반적으로 사용자(user)와 관련(relevant)이 있으며, 시스템 컨텍스트(context) 내에서 고유(unique)한 식별자(identifier)의 일부분임." />
      <comment value="If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986.  The value's primary purpose is computational mapping.  As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.)  A value formatted for human display can be conveyed using the [Rendered Value extension](extension-rendered-value.html). Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.value" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <example>
        <label value="General" />
        <valueString value="123456" />
      </example>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.1 / EI.1" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root)" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="./Value" />
      </mapping>
    </element>
    <element id="Composition.section.focus.identifier.period">
      <path value="Composition.section.focus.identifier.period" />
      <short value="식별자(identifier)의 유효 기간" />
      <definition value="식별자(identifier)가 사용 가능했거나 가능한 기간을 나타냄." />
      <comment value="A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. &quot;the patient was an inpatient of the hospital for this time range&quot;) or one value from the range applies (e.g. &quot;give to the patient between these two times&quot;).&#xA;&#xA;Period is not used for a duration (a measure of elapsed time). See [Duration](datatypes.html#Duration)." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.period" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="Period" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="per-1" />
        <severity value="error" />
        <human value="If present, start SHALL have a lower value than end" />
        <expression value="start.hasValue().not() or end.hasValue().not() or (start &lt;= end)" />
        <xpath value="not(exists(f:start/@value)) or not(exists(f:end/@value)) or (xs:dateTime(f:start/@value) &lt;= xs:dateTime(f:end/@value))" />
        <source value="http://hl7.org/fhir/StructureDefinition/Period" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="DR" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="IVL&lt;TS&gt;[lowClosed=&quot;true&quot; and highClosed=&quot;true&quot;] or URG&lt;TS&gt;[lowClosed=&quot;true&quot; and highClosed=&quot;true&quot;]" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.7 + CX.8" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="Role.effectiveTime or implied by context" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="./StartDate and ./EndDate" />
      </mapping>
    </element>
    <element id="Composition.section.focus.identifier.period.id">
      <path value="Composition.section.focus.identifier.period.id" />
      <representation value="xmlAttr" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.section.focus.identifier.period.extension">
      <path value="Composition.section.focus.identifier.period.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.section.focus.identifier.period.start">
      <path value="Composition.section.focus.identifier.period.start" />
      <short value="해당 유효 기간의 시작 시점 (설정된 날짜 포함)" />
      <definition value="해당 유효 기간이 시작되는 시점을 나타냄. 유효 기간은 시작 시점으로 설정된 날짜를 포함함." />
      <comment value="If the low element is missing, the meaning is that the low boundary is not known." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Period.start" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="dateTime" />
      </type>
      <condition value="ele-1" />
      <condition value="per-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="DR.1" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./low" />
      </mapping>
    </element>
    <element id="Composition.section.focus.identifier.period.end">
      <path value="Composition.section.focus.identifier.period.end" />
      <short value="해당 유효 기간의 종료 시점 (설정된 날짜 포함)" />
      <definition value="기간의 종료. 기간의 종료가 누락된 경우, 인스턴스가 생성될 때 끝이 알려지거나 계획되지 않았음을 의미함. 시작일은 과거일 수 있고 종료일은 미래일 수 있음. 이는 해당 기간이 해당 시간에 종료될 예정임을 의미함" />
      <comment value="The high value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has an end value of 2012-02-03." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Period.end" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="dateTime" />
      </type>
      <meaningWhenMissing value="If the end of the period is missing, it means that the period is ongoing" />
      <condition value="ele-1" />
      <condition value="per-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="DR.2" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./high" />
      </mapping>
    </element>
    <element id="Composition.section.focus.identifier.assigner">
      <path value="Composition.section.focus.identifier.assigner" />
      <short value="식별자(identifier)를 발급한 조직(단순 텍스트 기입 가능)" />
      <definition value="식별자(identifier)를 발급/관리하는 조직(organization)" />
      <comment value="The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.assigner" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="Reference" />
        <targetProfile value="http://hl7.org/fhir/StructureDefinition/Organization" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ref-1" />
        <severity value="error" />
        <human value="SHALL have a contained resource if a local reference is provided" />
        <expression value="reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))" />
        <xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Reference" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.4 / (CX.4,CX.9,CX.10)" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="II.assigningAuthorityName but note that this is an improper use by the definition of the field.  Also Role.scoper" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="./IdentifierIssuingAuthority" />
      </mapping>
    </element>
    <element id="Composition.section.focus.display">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="Composition.section.focus.display" />
      <short value="해당 리소스(resource)에 대한 대체 텍스트(alternative text)" />
      <definition value="리소스(resource) 참조 외에도 리소스(resource)를 식별하기 위한 일반 텍스트 설명임." />
      <comment value="This is generally not the same as the Resource.text of the referenced resource.  The purpose is to identify what's being referenced, not to fully describe it." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Reference.display" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.section.text">
      <path value="Composition.section.text" />
      <short value="부문(section)의 내용 요약" />
      <definition value="읽는 사람이 리소스의 내용을 알 수 있도록 되어있는 설명을 의미하며, 부문 (section)의 컨텐츠를 포함하고 있음. 해당 설명 내에 구조화된 데이터를 모두 인코딩할 필요는 없지만, &quot;임상적으로 안전&quot; 하도록 세부사항을 충분히 포함해야 함." />
      <comment value="문서 프로파일에는 임상안전보장을 위해 설명문(narrative)에서 어떤 콘텐츠가 담겨야 하는지 정의할수 있음" />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Composition.section.text" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="Narrative" />
      </type>
      <condition value="ele-1" />
      <condition value="cmp-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value=".text" />
      </mapping>
      <mapping>
        <identity value="cda" />
        <map value=".text" />
      </mapping>
    </element>
    <element id="Composition.section.text.id">
      <path value="Composition.section.text.id" />
      <representation value="xmlAttr" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.section.text.extension">
      <path value="Composition.section.text.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.section.text.status">
      <path value="Composition.section.text.status" />
      <short value="generated | extensions | additional | empty" />
      <definition value="설명의 상태. 자동으로 생성 되었는지, 사람에 의해 수동적으로 생성되었는지, 데이터 추가가 가능한지 여부를 나타냄." />
      <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" />
      <min value="1" />
      <max value="1" />
      <base>
        <path value="Narrative.status" />
        <min value="1" />
        <max value="1" />
      </base>
      <type>
        <code value="code" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="NarrativeStatus" />
        </extension>
        <strength value="required" />
        <description value="The status of a resource narrative." />
        <valueSet value="http://hl7.org/fhir/ValueSet/narrative-status|4.0.1" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.section.text.div">
      <path value="Composition.section.text.div" />
      <short value="제한된 XHTML 컨텐츠(content)" />
      <definition value="설명의 실제 컨텐츠(content). 가장 기본적인 XHTML 버전임." />
      <comment value="The contents of the html element are an XHTML fragment containing only the basic html formatting elements described in chapters 7-11 and 15 of the HTML 4.0 standard, &lt;a&gt; elements (either name or href), images and internally contained stylesheets. The XHTML content SHALL NOT contain a head, a body, external stylesheet references, scripts, forms, base/link/xlink, frames, iframes and objects." />
      <min value="1" />
      <max value="1" />
      <base>
        <path value="Narrative.div" />
        <min value="1" />
        <max value="1" />
      </base>
      <type>
        <code value="xhtml" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="txt-1" />
        <severity value="error" />
        <human value="The narrative SHALL contain only the basic html formatting elements and attributes described in chapters 7-11 (except section 4 of chapter 9) and 15 of the HTML 4.0 standard, &lt;a&gt; elements (either name or href), images and internally contained style attributes" />
        <expression value="htmlChecks()" />
        <xpath value="not(descendant-or-self::*[not(local-name(.)=('a', 'abbr', 'acronym', 'b', 'big', 'blockquote', 'br', 'caption', 'cite', 'code', 'col', 'colgroup', 'dd', 'dfn', 'div', 'dl', 'dt', 'em', 'h1', 'h2', 'h3', 'h4', 'h5', 'h6', 'hr', 'i', 'img', 'li', 'ol', 'p', 'pre', 'q', 'samp', 'small', 'span', 'strong', 'sub', 'sup', 'table', 'tbody', 'td', 'tfoot', 'th', 'thead', 'tr', 'tt', 'ul', 'var'))]) and not(descendant-or-self::*/@*[not(name(.)=('abbr', 'accesskey', 'align', 'alt', 'axis', 'bgcolor', 'border', 'cellhalign', 'cellpadding', 'cellspacing', 'cellvalign', 'char', 'charoff', 'charset', 'cite', 'class', 'colspan', 'compact', 'coords', 'dir', 'frame', 'headers', 'height', 'href', 'hreflang', 'hspace', 'id', 'lang', 'longdesc', 'name', 'nowrap', 'rel', 'rev', 'rowspan', 'rules', 'scope', 'shape', 'span', 'src', 'start', 'style', 'summary', 'tabindex', 'title', 'type', 'valign', 'value', 'vspace', 'width'))])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Narrative" />
      </constraint>
      <constraint>
        <key value="txt-2" />
        <severity value="error" />
        <human value="The narrative SHALL have some non-whitespace content" />
        <expression value="htmlChecks()" />
        <xpath value="descendant::text()[normalize-space(.)!=''] or descendant::h:img[@src]" />
        <source value="http://hl7.org/fhir/StructureDefinition/Narrative" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.section.mode">
      <path value="Composition.section.mode" />
      <short value="working | snapshot | changes" />
      <definition value="항목 목록(entry litst)이 어떻게 준비되었는지를 나타냄. 유지 관리하기에 적합한 작업 목록인지, 다른 소스로 부터 얻어진 항목의 스냅샷인지, 혹은 항목이 추가, 수정, 삭제 된 것으로 표시 될 수 있는지의 여부를 의미함." />
      <comment value="변경목록이 전체목록으로 오해되지 않도록 해야하기 때문에 이 요소는 modifier(수정자)로 표시(labeling)됨" />
      <requirements value="Sections are used in various ways, and it must be known in what way it is safe to use the entries in them." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Composition.section.mode" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="code" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="SectionMode" />
        </extension>
        <strength value="required" />
        <description value="The processing mode that applies to this section." />
        <valueSet value="http://hl7.org/fhir/ValueSet/list-mode|4.0.1" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="w5" />
        <map value="FiveWs.class" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value=".outBoundRelationship[typeCode=COMP].target[classCode=OBS&quot;].value" />
      </mapping>
      <mapping>
        <identity value="cda" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.section.orderedBy">
      <path value="Composition.section.orderedBy" />
      <short value="부문 (section) 내의 항목(entry)의 순서" />
      <definition value="항목(entry)들이 적용되는 순서를 지정함" />
      <comment value="응용프로그램은 제공된 순서대로 목록을 정렬하지만, 사용자는 설정을 통해 정렬순서를 바꿀 수 있음. 순서를 지정하지 않으면 어떤식으로 정렬 되는지 알수 없음" />
      <requirements value="Important for presentation and rendering.  Lists may be sorted to place more important information first or to group related entries." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Composition.section.orderedBy" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="CodeableConcept" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="SectionEntryOrder" />
        </extension>
        <strength value="preferred" />
        <description value="What order applies to the items in the entry." />
        <valueSet value="http://hl7.org/fhir/ValueSet/list-order" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CE/CNE/CWE" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CD" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept rdfs:subClassOf dt:CD" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value=".outboundRelationship[typeCode=COMP].sequenceNumber &gt; 1" />
      </mapping>
      <mapping>
        <identity value="cda" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.section.orderedBy.id">
      <path value="Composition.section.orderedBy.id" />
      <representation value="xmlAttr" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.section.orderedBy.extension">
      <path value="Composition.section.orderedBy.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.section.orderedBy.coding">
      <path value="Composition.section.orderedBy.coding" />
      <short value="용어체계(terminology system)에 의해 정의된 코드(code)" />
      <definition value="용어체계(terminology system)에 의해 정의된 코드(code) 참조" />
      <comment value="Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information.  Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true." />
      <requirements value="Allows for alternative encodings within a code system, and translations to other code systems." />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="CodeableConcept.coding" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Coding" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CE/CNE/CWE subset one of the sets of component 1-3 or 4-6" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CV" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding rdfs:subClassOf dt:CDCoding" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.1-8, C*E.10-22" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="union(., ./translation)" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding" />
      </mapping>
    </element>
    <element id="Composition.section.orderedBy.coding.id">
      <path value="Composition.section.orderedBy.coding.id" />
      <representation value="xmlAttr" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.section.orderedBy.coding.extension">
      <path value="Composition.section.orderedBy.coding.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.section.orderedBy.coding.system">
      <path value="Composition.section.orderedBy.coding.system" />
      <short value="용어체계 식별(Identity of terminology system)" />
      <definition value="코드(code)에서 기호(symbol)의 의미를 정의하는 CodeSystem[]를 식별" />
      <comment value="The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...).  OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously." />
      <requirements value="Need to be unambiguous about the source of the definition of the symbol." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.system" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="uri" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.3" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./codeSystem" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem" />
      </mapping>
    </element>
    <element id="Composition.section.orderedBy.coding.version">
      <path value="Composition.section.orderedBy.coding.version" />
      <short value="해당 시스템의 버전 정보 - 필요한 경우" />
      <definition value="해당 코드(code)를 선택한 시점에 사용된 CodeSystem[]의 버전임. 올바로 관리된 CodeSystem[]은 코드(code)의 의미가 버전과 관계없이 일관적이므로 버전을 보고할 필요가 없음. 그러나 CodeSystem[]의 관리 상태는 지속적으로 보장할 수 없는 부분이며, 코드(code)의 의미가 일관적임을 보장할 수 없는 경우 버전이 교체되어야 함." />
      <comment value="Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.version" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.7" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./codeSystemVersion" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion" />
      </mapping>
    </element>
    <element id="Composition.section.orderedBy.coding.code">
      <path value="Composition.section.orderedBy.coding.code" />
      <short value="시스템에 정의된 구문(syntax)의 기호(symbol)" />
      <definition value="시스템에 정의된 구문(syntax)의 기호(symbol). 기호(symbol)은 CodeSystem[]에 의해 정의된 구문에서 미리 정의된 코드(code) 또는 표현(expression)일 수 있음. (예: post-coordination)" />
      <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" />
      <requirements value="Need to refer to a particular code in the system." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.code" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="code" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.1" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./code" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code" />
      </mapping>
    </element>
    <element id="Composition.section.orderedBy.coding.display">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="Composition.section.orderedBy.coding.display" />
      <short value="시스템에 정의된 표기(representation)" />
      <definition value="시스템의 규칙(rules)에 따른, 시스템에서 코드(code)의 의미 표기(representation)" />
      <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" />
      <requirements value="Need to be able to carry a human-readable meaning of the code for readers that do not know  the system." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.display" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.2 - but note this is not well followed" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CV.displayName" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName" />
      </mapping>
    </element>
    <element id="Composition.section.orderedBy.coding.userSelected">
      <path value="Composition.section.orderedBy.coding.userSelected" />
      <short value="해당 코딩(coding)이 사용자(user)에 의해 직접(directly) 선택되었는지 여부" />
      <definition value="해당 코딩(coding)이 사용자(user)에 의해 직접 선택되었음을 나타냄 - (예) 사용가능한 항목(item)의 선택 목록(list) 중 하나 (코드 또는 디스플레이 )" />
      <comment value="Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely." />
      <requirements value="This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.userSelected" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="boolean" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="Sometimes implied by being first" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CD.codingRationale" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map;   fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [     fhir:source &quot;true&quot;;     fhir:target dt:CDCoding.codingRationale\#O   ]" />
      </mapping>
    </element>
    <element id="Composition.section.orderedBy.text">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="Composition.section.orderedBy.text" />
      <short value="개념(concept)에 대한 일반 텍스트 표현 (plain text representation)" />
      <definition value="데이터를 입력한 사용자(user)의 입장에서 보거나(seen)/선택하거나(selected)/언급한대로(uttered)의 개념(concept), 혹은 사용자(user)가 의도한 의미를 사람이 사용하는 언어로 표현한 것임." />
      <comment value="Very often the text is the same as a displayName of one of the codings." />
      <requirements value="The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="CodeableConcept.text" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.9. But note many systems use C*E.2 for this" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./originalText[mediaType/code=&quot;text/plain&quot;]/data" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText" />
      </mapping>
    </element>
    <element id="Composition.section.entry">
      <path value="Composition.section.entry" />
      <short value="해당 부문(section)을 보조해주는 참조 데이터" />
      <definition value="부문 (section)의 설명이 파생되는 실제 리소스에 대한 참조" />
      <comment value="목록이 리스트에 없는 경우, emptyReason 가 제공되어 야 함" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Composition.section.entry" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Reference" />
        <targetProfile value="http://hl7.org/fhir/StructureDefinition/Resource" />
      </type>
      <condition value="ele-1" />
      <condition value="cmp-2" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ref-1" />
        <severity value="error" />
        <human value="SHALL have a contained resource if a local reference is provided" />
        <expression value="reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))" />
        <xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Reference" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value=".outboundRelationship[typeCode=COMP] or  .participation[typeCode=SBJ]" />
      </mapping>
      <mapping>
        <identity value="cda" />
        <map value=".entry" />
      </mapping>
    </element>
    <element id="Composition.section.entry.id">
      <path value="Composition.section.entry.id" />
      <representation value="xmlAttr" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.section.entry.extension">
      <path value="Composition.section.entry.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.section.entry.reference">
      <path value="Composition.section.entry.reference" />
      <short value="문자로 표현된(literal) 참조, 상대적, 내부적 혹은 절대적인 URL" />
      <definition value="다른 리소스(resource)를 찾을 수 있는 위치에 대한 참조를 의미함. 해당 참조는 service base URL에 상대적인(relative) 경우 상대적 참조, 혹은 해당 리소스(resource)를 찾을 수 있는 위치인 절대(absolute) URL일 수 있음. 해당 참조는 버전에 따라 다를 수 있음. 해당 참조가 FHIR RESTful 서버가 아닌 경우, 버전에 따라 다른 것으로 간주함. 내부 구문(Internal Fragment) 참조('#'으로 시작)는 포함되어 있는 리소스(resource)를 참조함." />
      <comment value="Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries.   Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure &quot;/[type]/[id]&quot; then it should be assumed that the reference is to a FHIR RESTful server." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Reference.reference" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <condition value="ref-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.section.entry.type">
      <path value="Composition.section.entry.type" />
      <short value="참조(reference)가 참조(refer)하는 유형(type)  (예. &quot;Patient&quot;)" />
      <definition value="참조 대상의 예상 형식(expected type).  Reference.type과 Reference.reference가 모두 채워지고 Reference.reference가 FHIR URL이면 두가지 모두 일치해야함. 유형(type)은이 참조가 참조하는 유형(type) 인 리소스(resource) 정의의 표준(Canonical) URL임. 참조는 http://hl7.org/fhir/StructureDefinition/과 관련된 URL임. (예) &quot; 환자 &quot; http://hl7.org/fhir/StructureDefinition/Patient에 대한 참조. 절대(absolute) URL은 논리 모델에만 허용됨 (리소스(resource)가 아닌 논리 모델의 참조에서만 사용할 수 있음)." />
      <comment value="This element is used to indicate the type of  the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Reference.type" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="uri" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="FHIRResourceTypeExt" />
        </extension>
        <strength value="extensible" />
        <description value="Aa resource (or, for logical models, the URI of the logical model)." />
        <valueSet value="http://hl7.org/fhir/ValueSet/resource-types" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.section.entry.identifier">
      <path value="Composition.section.entry.identifier" />
      <short value="문자로 표현된(literal) 참조를 알 수 없는 경우 사용하는, 논리적(logical) 참조" />
      <definition value="대상 리소스(resource)의 식별자(identifier). 이것은 다른 리소스(resource)를 직접 참조할 방법이 없을 때 사용- 해당 엔티티(entity)가 FHIR 서버를 통해 사용할 수 없거나  리소스(resource) 작성자가 알려진 식별자(identifier)를 실제 위치로 변활할 방법이 없기 때문에 이 방법이 사용됨. Reference.identifier가 실제로 FHIR 인스턴스로 노출되는 것을 가리킬(point) 필요는 없지만, FHIR 인스턴스로 노출될 것으로 예상되는 비즈니스 개념(concept)을 가리켜야하며, 해당 인스턴스는 참조가 허용되는 FHIR 리소스 타입(resource type)이여야 함." />
      <comment value="When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. &#xA;&#xA;When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference&#xA;&#xA;Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.&#xA;&#xA;Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference.  For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport).  One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any)." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Reference.identifier" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="Identifier" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX / EI (occasionally, more often EI maps to a resource id or a URL)" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs.  Also maps to Role[classCode=IDENT]" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="Identifier" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value=".identifier" />
      </mapping>
    </element>
    <element id="Composition.section.entry.identifier.id">
      <path value="Composition.section.entry.identifier.id" />
      <representation value="xmlAttr" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.section.entry.identifier.extension">
      <path value="Composition.section.entry.identifier.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.section.entry.identifier.use">
      <path value="Composition.section.entry.identifier.use" />
      <short value="usual | official | temp | secondary | old (If known)" />
      <definition value="해당 식별자(identifier)의 목적" />
      <comment value="Applications can assume that an identifier is permanent unless it explicitly says that it is temporary." />
      <requirements value="Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.use" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="code" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isModifier value="true" />
      <isModifierReason value="This is labeled as &quot;Is Modifier&quot; because applications should not mistake a temporary id for a permanent one." />
      <isSummary value="true" />
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="IdentifierUse" />
        </extension>
        <strength value="required" />
        <description value="Identifies the purpose for this identifier, if known ." />
        <valueSet value="http://hl7.org/fhir/ValueSet/identifier-use|4.0.1" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="N/A" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="Role.code or implied by context" />
      </mapping>
    </element>
    <element id="Composition.section.entry.identifier.type">
      <path value="Composition.section.entry.identifier.type" />
      <short value="식별자(identifier)에 대한 설명" />
      <definition value="특정 목적으로 사용되는 식별자(identifier)를 결정하기 위해 사용하는 식별자(identifier)의 코드화된(coded) 유형(type)을 나타냄." />
      <comment value="This element deals only with general categories of identifiers.  It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage.   Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type." />
      <requirements value="Allows users to make use of identifiers when the identifier system is not known." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.type" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="CodeableConcept" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="IdentifierType" />
        </extension>
        <strength value="extensible" />
        <description value="A coded type for an identifier that can be used to determine which identifier to use for a specific purpose." />
        <valueSet value="http://hl7.org/fhir/ValueSet/identifier-type" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CE/CNE/CWE" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CD" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept rdfs:subClassOf dt:CD" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.5" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="Role.code or implied by context" />
      </mapping>
    </element>
    <element id="Composition.section.entry.identifier.type.id">
      <path value="Composition.section.entry.identifier.type.id" />
      <representation value="xmlAttr" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.section.entry.identifier.type.extension">
      <path value="Composition.section.entry.identifier.type.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.section.entry.identifier.type.coding">
      <path value="Composition.section.entry.identifier.type.coding" />
      <short value="용어체계(terminology system)에 의해 정의된 코드(code)" />
      <definition value="용어체계(terminology system)에 의해 정의된 코드(code) 참조" />
      <comment value="Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information.  Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true." />
      <requirements value="Allows for alternative encodings within a code system, and translations to other code systems." />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="CodeableConcept.coding" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Coding" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CE/CNE/CWE subset one of the sets of component 1-3 or 4-6" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CV" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding rdfs:subClassOf dt:CDCoding" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.1-8, C*E.10-22" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="union(., ./translation)" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding" />
      </mapping>
    </element>
    <element id="Composition.section.entry.identifier.type.coding.id">
      <path value="Composition.section.entry.identifier.type.coding.id" />
      <representation value="xmlAttr" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.section.entry.identifier.type.coding.extension">
      <path value="Composition.section.entry.identifier.type.coding.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.section.entry.identifier.type.coding.system">
      <path value="Composition.section.entry.identifier.type.coding.system" />
      <short value="용어체계 식별(Identity of terminology system)" />
      <definition value="코드(code)에서 기호(symbol)의 의미를 정의하는 CodeSystem[]를 식별" />
      <comment value="The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...).  OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously." />
      <requirements value="Need to be unambiguous about the source of the definition of the symbol." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.system" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="uri" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.3" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./codeSystem" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem" />
      </mapping>
    </element>
    <element id="Composition.section.entry.identifier.type.coding.version">
      <path value="Composition.section.entry.identifier.type.coding.version" />
      <short value="해당 시스템의 버전 정보 - 필요한 경우" />
      <definition value="해당 코드(code)를 선택한 시점에 사용된 CodeSystem[]의 버전임. 올바로 관리된 CodeSystem[]은 코드(code)의 의미가 버전과 관계없이 일관적이므로 버전을 보고할 필요가 없음. 그러나 CodeSystem[]의 관리 상태는 지속적으로 보장할 수 없는 부분이며, 코드(code)의 의미가 일관적임을 보장할 수 없는 경우 버전이 교체되어야 함." />
      <comment value="Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.version" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.7" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./codeSystemVersion" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion" />
      </mapping>
    </element>
    <element id="Composition.section.entry.identifier.type.coding.code">
      <path value="Composition.section.entry.identifier.type.coding.code" />
      <short value="시스템에 정의된 구문(syntax)의 기호(symbol)" />
      <definition value="시스템에 정의된 구문(syntax)의 기호(symbol). 기호(symbol)은 CodeSystem[]에 의해 정의된 구문에서 미리 정의된 코드(code) 또는 표현(expression)일 수 있음. (예: post-coordination)" />
      <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" />
      <requirements value="Need to refer to a particular code in the system." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.code" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="code" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.1" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./code" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code" />
      </mapping>
    </element>
    <element id="Composition.section.entry.identifier.type.coding.display">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="Composition.section.entry.identifier.type.coding.display" />
      <short value="시스템에 정의된 표기(representation)" />
      <definition value="시스템의 규칙(rules)에 따른, 시스템에서 코드(code)의 의미 표기(representation)" />
      <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" />
      <requirements value="Need to be able to carry a human-readable meaning of the code for readers that do not know  the system." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.display" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.2 - but note this is not well followed" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CV.displayName" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName" />
      </mapping>
    </element>
    <element id="Composition.section.entry.identifier.type.coding.userSelected">
      <path value="Composition.section.entry.identifier.type.coding.userSelected" />
      <short value="해당 코딩(coding)이 사용자(user)에 의해 직접(directly) 선택되었는지 여부" />
      <definition value="해당 코딩(coding)이 사용자(user)에 의해 직접 선택되었음을 나타냄 - (예) 사용가능한 항목(item)의 선택 목록(list) 중 하나 (코드 또는 디스플레이 )" />
      <comment value="Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely." />
      <requirements value="This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.userSelected" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="boolean" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="Sometimes implied by being first" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CD.codingRationale" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map;   fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [     fhir:source &quot;true&quot;;     fhir:target dt:CDCoding.codingRationale\#O   ]" />
      </mapping>
    </element>
    <element id="Composition.section.entry.identifier.type.text">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="Composition.section.entry.identifier.type.text" />
      <short value="개념(concept)에 대한 일반 텍스트 표현 (plain text representation)" />
      <definition value="데이터를 입력한 사용자(user)의 입장에서 보거나(seen)/선택하거나(selected)/언급한대로(uttered)의 개념(concept), 혹은 사용자(user)가 의도한 의미를 사람이 사용하는 언어로 표현한 것임." />
      <comment value="Very often the text is the same as a displayName of one of the codings." />
      <requirements value="The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="CodeableConcept.text" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.9. But note many systems use C*E.2 for this" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./originalText[mediaType/code=&quot;text/plain&quot;]/data" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText" />
      </mapping>
    </element>
    <element id="Composition.section.entry.identifier.system">
      <path value="Composition.section.entry.identifier.system" />
      <short value="식별자(identifier) 값의 네임스페이스(namespace)" />
      <definition value="설정 값에 대한 네임스페이스 (namespace), 즉 고유(unique)한 설정값을 설명하는 URL을 설정함." />
      <comment value="Identifier.system is always case sensitive." />
      <requirements value="There are many sets  of identifiers.  To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.system" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="uri" />
      </type>
      <example>
        <label value="General" />
        <valueUri value="http://www.acme.com/identifiers/patient" />
      </example>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.4 / EI-2-4" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="II.root or Role.id.root" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="./IdentifierType" />
      </mapping>
    </element>
    <element id="Composition.section.entry.identifier.value">
      <path value="Composition.section.entry.identifier.value" />
      <short value="고유(unique)한 값(value)" />
      <definition value="일반적으로 사용자(user)와 관련(relevant)이 있으며, 시스템 컨텍스트(context) 내에서 고유(unique)한 식별자(identifier)의 일부분임." />
      <comment value="If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986.  The value's primary purpose is computational mapping.  As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.)  A value formatted for human display can be conveyed using the [Rendered Value extension](extension-rendered-value.html). Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.value" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <example>
        <label value="General" />
        <valueString value="123456" />
      </example>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.1 / EI.1" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root)" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="./Value" />
      </mapping>
    </element>
    <element id="Composition.section.entry.identifier.period">
      <path value="Composition.section.entry.identifier.period" />
      <short value="식별자(identifier)의 유효 기간" />
      <definition value="식별자(identifier)가 사용 가능했거나 가능한 기간을 나타냄." />
      <comment value="A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. &quot;the patient was an inpatient of the hospital for this time range&quot;) or one value from the range applies (e.g. &quot;give to the patient between these two times&quot;).&#xA;&#xA;Period is not used for a duration (a measure of elapsed time). See [Duration](datatypes.html#Duration)." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.period" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="Period" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="per-1" />
        <severity value="error" />
        <human value="If present, start SHALL have a lower value than end" />
        <expression value="start.hasValue().not() or end.hasValue().not() or (start &lt;= end)" />
        <xpath value="not(exists(f:start/@value)) or not(exists(f:end/@value)) or (xs:dateTime(f:start/@value) &lt;= xs:dateTime(f:end/@value))" />
        <source value="http://hl7.org/fhir/StructureDefinition/Period" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="DR" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="IVL&lt;TS&gt;[lowClosed=&quot;true&quot; and highClosed=&quot;true&quot;] or URG&lt;TS&gt;[lowClosed=&quot;true&quot; and highClosed=&quot;true&quot;]" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.7 + CX.8" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="Role.effectiveTime or implied by context" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="./StartDate and ./EndDate" />
      </mapping>
    </element>
    <element id="Composition.section.entry.identifier.period.id">
      <path value="Composition.section.entry.identifier.period.id" />
      <representation value="xmlAttr" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.section.entry.identifier.period.extension">
      <path value="Composition.section.entry.identifier.period.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.section.entry.identifier.period.start">
      <path value="Composition.section.entry.identifier.period.start" />
      <short value="해당 유효 기간의 시작 시점 (설정된 날짜 포함)" />
      <definition value="해당 유효 기간이 시작되는 시점을 나타냄. 유효 기간은 시작 시점으로 설정된 날짜를 포함함." />
      <comment value="If the low element is missing, the meaning is that the low boundary is not known." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Period.start" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="dateTime" />
      </type>
      <condition value="ele-1" />
      <condition value="per-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="DR.1" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./low" />
      </mapping>
    </element>
    <element id="Composition.section.entry.identifier.period.end">
      <path value="Composition.section.entry.identifier.period.end" />
      <short value="해당 유효 기간의 종료 시점 (설정된 날짜 포함)" />
      <definition value="기간의 종료. 기간의 종료가 누락된 경우, 인스턴스가 생성될 때 끝이 알려지거나 계획되지 않았음을 의미함. 시작일은 과거일 수 있고 종료일은 미래일 수 있음. 이는 해당 기간이 해당 시간에 종료될 예정임을 의미함" />
      <comment value="The high value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has an end value of 2012-02-03." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Period.end" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="dateTime" />
      </type>
      <meaningWhenMissing value="If the end of the period is missing, it means that the period is ongoing" />
      <condition value="ele-1" />
      <condition value="per-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="DR.2" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./high" />
      </mapping>
    </element>
    <element id="Composition.section.entry.identifier.assigner">
      <path value="Composition.section.entry.identifier.assigner" />
      <short value="식별자(identifier)를 발급한 조직(단순 텍스트 기입 가능)" />
      <definition value="식별자(identifier)를 발급/관리하는 조직(organization)" />
      <comment value="The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.assigner" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="Reference" />
        <targetProfile value="http://hl7.org/fhir/StructureDefinition/Organization" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ref-1" />
        <severity value="error" />
        <human value="SHALL have a contained resource if a local reference is provided" />
        <expression value="reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))" />
        <xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Reference" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.4 / (CX.4,CX.9,CX.10)" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="II.assigningAuthorityName but note that this is an improper use by the definition of the field.  Also Role.scoper" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="./IdentifierIssuingAuthority" />
      </mapping>
    </element>
    <element id="Composition.section.entry.display">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="Composition.section.entry.display" />
      <short value="해당 리소스(resource)에 대한 대체 텍스트(alternative text)" />
      <definition value="리소스(resource) 참조 외에도 리소스(resource)를 식별하기 위한 일반 텍스트 설명임." />
      <comment value="This is generally not the same as the Resource.text of the referenced resource.  The purpose is to identify what's being referenced, not to fully describe it." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Reference.display" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.section.emptyReason">
      <path value="Composition.section.emptyReason" />
      <short value="부문(section)이 비어있는 이유" />
      <definition value="부문(section)이 비어있는 경우는 항목이 비어있음. 비어있는 부문은 일반적으로 빈 이유를 설명하는 텍스트가 있음." />
      <comment value="비어있는 섹션에 대해서 다양한 해석이 발생함. 이 code는 전체 섹션 컨텐츠가 폐지되었을 때 사용되며 개별 항목이 생략된 경우는 사용되지 않음. 이를 구현할 때 text note나 플래그(flag) 사용을 고려할 수 있음" />
      <requirements value="Allows capturing things like &quot;none exist&quot; or &quot;not asked&quot; which can be important for most lists." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Composition.section.emptyReason" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="CodeableConcept" />
      </type>
      <condition value="ele-1" />
      <condition value="cmp-2" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="SectionEmptyReason" />
        </extension>
        <strength value="preferred" />
        <description value="If a section is empty, why it is empty." />
        <valueSet value="http://hl7.org/fhir/ValueSet/list-empty-reason" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CE/CNE/CWE" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CD" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept rdfs:subClassOf dt:CD" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value=".inboundRelationship[typeCode=SUBJ,code&lt;ListEmptyReason].value[type=CD]" />
      </mapping>
      <mapping>
        <identity value="cda" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.section.emptyReason.id">
      <path value="Composition.section.emptyReason.id" />
      <representation value="xmlAttr" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.section.emptyReason.extension">
      <path value="Composition.section.emptyReason.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.section.emptyReason.coding">
      <path value="Composition.section.emptyReason.coding" />
      <short value="용어체계(terminology system)에 의해 정의된 코드(code)" />
      <definition value="용어체계(terminology system)에 의해 정의된 코드(code) 참조" />
      <comment value="Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information.  Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true." />
      <requirements value="Allows for alternative encodings within a code system, and translations to other code systems." />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="CodeableConcept.coding" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Coding" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CE/CNE/CWE subset one of the sets of component 1-3 or 4-6" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CV" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding rdfs:subClassOf dt:CDCoding" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.1-8, C*E.10-22" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="union(., ./translation)" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding" />
      </mapping>
    </element>
    <element id="Composition.section.emptyReason.coding.id">
      <path value="Composition.section.emptyReason.coding.id" />
      <representation value="xmlAttr" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.section.emptyReason.coding.extension">
      <path value="Composition.section.emptyReason.coding.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.section.emptyReason.coding.system">
      <path value="Composition.section.emptyReason.coding.system" />
      <short value="용어체계 식별(Identity of terminology system)" />
      <definition value="코드(code)에서 기호(symbol)의 의미를 정의하는 CodeSystem[]를 식별" />
      <comment value="The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...).  OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously." />
      <requirements value="Need to be unambiguous about the source of the definition of the symbol." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.system" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="uri" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.3" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./codeSystem" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem" />
      </mapping>
    </element>
    <element id="Composition.section.emptyReason.coding.version">
      <path value="Composition.section.emptyReason.coding.version" />
      <short value="해당 시스템의 버전 정보 - 필요한 경우" />
      <definition value="해당 코드(code)를 선택한 시점에 사용된 CodeSystem[]의 버전임. 올바로 관리된 CodeSystem[]은 코드(code)의 의미가 버전과 관계없이 일관적이므로 버전을 보고할 필요가 없음. 그러나 CodeSystem[]의 관리 상태는 지속적으로 보장할 수 없는 부분이며, 코드(code)의 의미가 일관적임을 보장할 수 없는 경우 버전이 교체되어야 함." />
      <comment value="Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.version" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.7" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./codeSystemVersion" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion" />
      </mapping>
    </element>
    <element id="Composition.section.emptyReason.coding.code">
      <path value="Composition.section.emptyReason.coding.code" />
      <short value="시스템에 정의된 구문(syntax)의 기호(symbol)" />
      <definition value="시스템에 정의된 구문(syntax)의 기호(symbol). 기호(symbol)은 CodeSystem[]에 의해 정의된 구문에서 미리 정의된 코드(code) 또는 표현(expression)일 수 있음. (예: post-coordination)" />
      <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" />
      <requirements value="Need to refer to a particular code in the system." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.code" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="code" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.1" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./code" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code" />
      </mapping>
    </element>
    <element id="Composition.section.emptyReason.coding.display">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="Composition.section.emptyReason.coding.display" />
      <short value="시스템에 정의된 표기(representation)" />
      <definition value="시스템의 규칙(rules)에 따른, 시스템에서 코드(code)의 의미 표기(representation)" />
      <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" />
      <requirements value="Need to be able to carry a human-readable meaning of the code for readers that do not know  the system." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.display" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.2 - but note this is not well followed" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CV.displayName" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName" />
      </mapping>
    </element>
    <element id="Composition.section.emptyReason.coding.userSelected">
      <path value="Composition.section.emptyReason.coding.userSelected" />
      <short value="해당 코딩(coding)이 사용자(user)에 의해 직접(directly) 선택되었는지 여부" />
      <definition value="해당 코딩(coding)이 사용자(user)에 의해 직접 선택되었음을 나타냄 - (예) 사용가능한 항목(item)의 선택 목록(list) 중 하나 (코드 또는 디스플레이 )" />
      <comment value="Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely." />
      <requirements value="This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.userSelected" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="boolean" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="Sometimes implied by being first" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CD.codingRationale" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map;   fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [     fhir:source &quot;true&quot;;     fhir:target dt:CDCoding.codingRationale\#O   ]" />
      </mapping>
    </element>
    <element id="Composition.section.emptyReason.text">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="Composition.section.emptyReason.text" />
      <short value="개념(concept)에 대한 일반 텍스트 표현 (plain text representation)" />
      <definition value="데이터를 입력한 사용자(user)의 입장에서 보거나(seen)/선택하거나(selected)/언급한대로(uttered)의 개념(concept), 혹은 사용자(user)가 의도한 의미를 사람이 사용하는 언어로 표현한 것임." />
      <comment value="Very often the text is the same as a displayName of one of the codings." />
      <requirements value="The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="CodeableConcept.text" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.9. But note many systems use C*E.2 for this" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./originalText[mediaType/code=&quot;text/plain&quot;]/data" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText" />
      </mapping>
    </element>
    <element id="Composition.section.section">
      <path value="Composition.section.section" />
      <short value="중첩된 부문(section)" />
      <definition value="해당 섹션 내에 중첩된 하위-부문(sub-section)" />
      <comment value="중첩 섹션은 읽는사람(reader)이 문서의 특정 부분으로 이동하는 데 주로 사용됨" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Composition.section.section" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="BackboneElement" />
      </type>
      <condition value="cmp-1" />
      <mapping>
        <identity value="rim" />
        <map value="./outboundRelationship[typeCode=&quot;COMP&quot; and isNormalActRelationship()]/target[moodCode=&quot;EVN&quot; and classCode=&quot;DOCSECT&quot; and isNormalAct]" />
      </mapping>
      <mapping>
        <identity value="cda" />
        <map value=".component.section" />
      </mapping>
    </element>
    <element id="Composition.section.section.id">
      <path value="Composition.section.section.id" />
      <representation value="xmlAttr" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.section.section.extension">
      <path value="Composition.section.section.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.section.section.modifierExtension">
      <path value="Composition.section.section.modifierExtension" />
      <short value="Extensions that cannot be ignored even if unrecognized" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.&#xA;&#xA;Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself)." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <requirements value="Modifier extensions allow for extensions that *cannot* be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored.  This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the [definition of modifier extensions](extensibility.html#modifierExtension)." />
      <alias value="extensions" />
      <alias value="user content" />
      <alias value="modifiers" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="BackboneElement.modifierExtension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <isModifier value="true" />
      <isModifierReason value="Modifier extensions are expected to modify the meaning or interpretation of the element that contains them" />
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.section.section.title">
      <path value="Composition.section.section.title" />
      <short value="부문(section) 라벨" />
      <definition value="특정 부문(section)의 라벨(label)을 나나탬. 문서에 제시되어 있는 컨텐츠의 일부로 목차를 만드는데 사용됨." />
      <comment value="The title identifies the section for a human reader. The title must be consistent with the narrative of the resource that is the target of the section.content reference. Generally, sections SHOULD have titles, but in some documents, it is unnecessary or inappropriate. Typically, this is where a section has subsections that have their own adequately distinguishing title,  or documents that only have a single section. Most Implementation Guides will make section title to be a required element." />
      <requirements value="Section headings are often standardized for different types of documents.  They give guidance to humans on how the document is organized." />
      <alias value="header" />
      <alias value="label" />
      <alias value="caption" />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Composition.section.title" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./title" />
      </mapping>
      <mapping>
        <identity value="cda" />
        <map value=".title" />
      </mapping>
    </element>
    <element id="Composition.section.section.code">
      <path value="Composition.section.section.code" />
      <short value="부문(section) 분류 (권장)" />
      <definition value="부문(section) 내에 포함된 컨텐츠의 유형을 식별하는 코드로 부문 제목과 일치 해야 함." />
      <comment value="The code identifies the section for an automated processor of the document. This is particularly relevant when using profiles to control the structure of the document.   &#xA;&#xA;If the section has content (instead of sub-sections), the section.code does not change the meaning or interpretation of the resource that is the content of the section in the comments for the section.code." />
      <requirements value="Provides computable standardized labels to topics within the document." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Composition.section.code" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="CodeableConcept" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="CompositionSectionType" />
        </extension>
        <strength value="example" />
        <description value="Classification of a section of a composition/document." />
        <valueSet value="http://hl7.org/fhir/ValueSet/doc-section-codes" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CE/CNE/CWE" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CD" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept rdfs:subClassOf dt:CD" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./code" />
      </mapping>
      <mapping>
        <identity value="cda" />
        <map value=".code" />
      </mapping>
    </element>
    <element id="Composition.section.section.code.id">
      <path value="Composition.section.section.code.id" />
      <representation value="xmlAttr" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.section.section.code.extension">
      <path value="Composition.section.section.code.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.section.section.code.coding">
      <path value="Composition.section.section.code.coding" />
      <short value="용어체계(terminology system)에 의해 정의된 코드(code)" />
      <definition value="용어체계(terminology system)에 의해 정의된 코드(code) 참조" />
      <comment value="Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information.  Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true." />
      <requirements value="Allows for alternative encodings within a code system, and translations to other code systems." />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="CodeableConcept.coding" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Coding" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CE/CNE/CWE subset one of the sets of component 1-3 or 4-6" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CV" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding rdfs:subClassOf dt:CDCoding" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.1-8, C*E.10-22" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="union(., ./translation)" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding" />
      </mapping>
    </element>
    <element id="Composition.section.section.code.coding.id">
      <path value="Composition.section.section.code.coding.id" />
      <representation value="xmlAttr" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.section.section.code.coding.extension">
      <path value="Composition.section.section.code.coding.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.section.section.code.coding.system">
      <path value="Composition.section.section.code.coding.system" />
      <short value="용어체계 식별(Identity of terminology system)" />
      <definition value="코드(code)에서 기호(symbol)의 의미를 정의하는 CodeSystem[]를 식별" />
      <comment value="The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...).  OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously." />
      <requirements value="Need to be unambiguous about the source of the definition of the symbol." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.system" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="uri" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.3" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./codeSystem" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem" />
      </mapping>
    </element>
    <element id="Composition.section.section.code.coding.version">
      <path value="Composition.section.section.code.coding.version" />
      <short value="해당 시스템의 버전 정보 - 필요한 경우" />
      <definition value="해당 코드(code)를 선택한 시점에 사용된 CodeSystem[]의 버전임. 올바로 관리된 CodeSystem[]은 코드(code)의 의미가 버전과 관계없이 일관적이므로 버전을 보고할 필요가 없음. 그러나 CodeSystem[]의 관리 상태는 지속적으로 보장할 수 없는 부분이며, 코드(code)의 의미가 일관적임을 보장할 수 없는 경우 버전이 교체되어야 함." />
      <comment value="Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.version" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.7" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./codeSystemVersion" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion" />
      </mapping>
    </element>
    <element id="Composition.section.section.code.coding.code">
      <path value="Composition.section.section.code.coding.code" />
      <short value="시스템에 정의된 구문(syntax)의 기호(symbol)" />
      <definition value="시스템에 정의된 구문(syntax)의 기호(symbol). 기호(symbol)은 CodeSystem[]에 의해 정의된 구문에서 미리 정의된 코드(code) 또는 표현(expression)일 수 있음. (예: post-coordination)" />
      <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" />
      <requirements value="Need to refer to a particular code in the system." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.code" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="code" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.1" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./code" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code" />
      </mapping>
    </element>
    <element id="Composition.section.section.code.coding.display">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="Composition.section.section.code.coding.display" />
      <short value="시스템에 정의된 표기(representation)" />
      <definition value="시스템의 규칙(rules)에 따른, 시스템에서 코드(code)의 의미 표기(representation)" />
      <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" />
      <requirements value="Need to be able to carry a human-readable meaning of the code for readers that do not know  the system." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.display" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.2 - but note this is not well followed" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CV.displayName" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName" />
      </mapping>
    </element>
    <element id="Composition.section.section.code.coding.userSelected">
      <path value="Composition.section.section.code.coding.userSelected" />
      <short value="해당 코딩(coding)이 사용자(user)에 의해 직접(directly) 선택되었는지 여부" />
      <definition value="해당 코딩(coding)이 사용자(user)에 의해 직접 선택되었음을 나타냄 - (예) 사용가능한 항목(item)의 선택 목록(list) 중 하나 (코드 또는 디스플레이 )" />
      <comment value="Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely." />
      <requirements value="This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.userSelected" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="boolean" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="Sometimes implied by being first" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CD.codingRationale" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map;   fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [     fhir:source &quot;true&quot;;     fhir:target dt:CDCoding.codingRationale\#O   ]" />
      </mapping>
    </element>
    <element id="Composition.section.section.code.text">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="Composition.section.section.code.text" />
      <short value="개념(concept)에 대한 일반 텍스트 표현 (plain text representation)" />
      <definition value="데이터를 입력한 사용자(user)의 입장에서 보거나(seen)/선택하거나(selected)/언급한대로(uttered)의 개념(concept), 혹은 사용자(user)가 의도한 의미를 사람이 사용하는 언어로 표현한 것임." />
      <comment value="Very often the text is the same as a displayName of one of the codings." />
      <requirements value="The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="CodeableConcept.text" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.9. But note many systems use C*E.2 for this" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./originalText[mediaType/code=&quot;text/plain&quot;]/data" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText" />
      </mapping>
    </element>
    <element id="Composition.section.section.author">
      <path value="Composition.section.section.author" />
      <short value="누가 그리고 무슨 부문(section)을 작성했는지" />
      <definition value="이 섹션에 대해 입력한 사람이 아닌 해당 정보에 대한 책임자를 식별함" />
      <comment value="References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository." />
      <requirements value="Identifies who is responsible for the content." />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Composition.section.author" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Reference" />
        <targetProfile value="http://hl7.org/fhir/StructureDefinition/Practitioner" />
        <targetProfile value="http://hl7.org/fhir/StructureDefinition/PractitionerRole" />
        <targetProfile value="http://hl7.org/fhir/StructureDefinition/Device" />
        <targetProfile value="http://hl7.org/fhir/StructureDefinition/Patient" />
        <targetProfile value="http://hl7.org/fhir/StructureDefinition/RelatedPerson" />
        <targetProfile value="http://hl7.org/fhir/StructureDefinition/Organization" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ref-1" />
        <severity value="error" />
        <human value="SHALL have a contained resource if a local reference is provided" />
        <expression value="reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))" />
        <xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Reference" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" />
      </mapping>
      <mapping>
        <identity value="w5" />
        <map value="FiveWs.author" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value=".participation[typeCode=&quot;AUT&quot;].role[classCode=&quot;ASSIGNED&quot;]" />
      </mapping>
      <mapping>
        <identity value="cda" />
        <map value=".author.assignedAuthor" />
      </mapping>
    </element>
    <element id="Composition.section.section.author.id">
      <path value="Composition.section.section.author.id" />
      <representation value="xmlAttr" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.section.section.author.extension">
      <path value="Composition.section.section.author.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.section.section.author.reference">
      <path value="Composition.section.section.author.reference" />
      <short value="문자로 표현된(literal) 참조, 상대적, 내부적 혹은 절대적인 URL" />
      <definition value="다른 리소스(resource)를 찾을 수 있는 위치에 대한 참조를 의미함. 해당 참조는 service base URL에 상대적인(relative) 경우 상대적 참조, 혹은 해당 리소스(resource)를 찾을 수 있는 위치인 절대(absolute) URL일 수 있음. 해당 참조는 버전에 따라 다를 수 있음. 해당 참조가 FHIR RESTful 서버가 아닌 경우, 버전에 따라 다른 것으로 간주함. 내부 구문(Internal Fragment) 참조('#'으로 시작)는 포함되어 있는 리소스(resource)를 참조함." />
      <comment value="Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries.   Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure &quot;/[type]/[id]&quot; then it should be assumed that the reference is to a FHIR RESTful server." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Reference.reference" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <condition value="ref-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.section.section.author.type">
      <path value="Composition.section.section.author.type" />
      <short value="참조(reference)가 참조(refer)하는 유형(type)  (예. &quot;Patient&quot;)" />
      <definition value="참조 대상의 예상 형식(expected type).  Reference.type과 Reference.reference가 모두 채워지고 Reference.reference가 FHIR URL이면 두가지 모두 일치해야함. 유형(type)은이 참조가 참조하는 유형(type) 인 리소스(resource) 정의의 표준(Canonical) URL임. 참조는 http://hl7.org/fhir/StructureDefinition/과 관련된 URL임. (예) &quot; 환자 &quot; http://hl7.org/fhir/StructureDefinition/Patient에 대한 참조. 절대(absolute) URL은 논리 모델에만 허용됨 (리소스(resource)가 아닌 논리 모델의 참조에서만 사용할 수 있음)." />
      <comment value="This element is used to indicate the type of  the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Reference.type" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="uri" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="FHIRResourceTypeExt" />
        </extension>
        <strength value="extensible" />
        <description value="Aa resource (or, for logical models, the URI of the logical model)." />
        <valueSet value="http://hl7.org/fhir/ValueSet/resource-types" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.section.section.author.identifier">
      <path value="Composition.section.section.author.identifier" />
      <short value="문자로 표현된(literal) 참조를 알 수 없는 경우 사용하는, 논리적(logical) 참조" />
      <definition value="대상 리소스(resource)의 식별자(identifier). 이것은 다른 리소스(resource)를 직접 참조할 방법이 없을 때 사용- 해당 엔티티(entity)가 FHIR 서버를 통해 사용할 수 없거나  리소스(resource) 작성자가 알려진 식별자(identifier)를 실제 위치로 변활할 방법이 없기 때문에 이 방법이 사용됨. Reference.identifier가 실제로 FHIR 인스턴스로 노출되는 것을 가리킬(point) 필요는 없지만, FHIR 인스턴스로 노출될 것으로 예상되는 비즈니스 개념(concept)을 가리켜야하며, 해당 인스턴스는 참조가 허용되는 FHIR 리소스 타입(resource type)이여야 함." />
      <comment value="When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. &#xA;&#xA;When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference&#xA;&#xA;Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.&#xA;&#xA;Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference.  For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport).  One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any)." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Reference.identifier" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="Identifier" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX / EI (occasionally, more often EI maps to a resource id or a URL)" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs.  Also maps to Role[classCode=IDENT]" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="Identifier" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value=".identifier" />
      </mapping>
    </element>
    <element id="Composition.section.section.author.identifier.id">
      <path value="Composition.section.section.author.identifier.id" />
      <representation value="xmlAttr" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.section.section.author.identifier.extension">
      <path value="Composition.section.section.author.identifier.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.section.section.author.identifier.use">
      <path value="Composition.section.section.author.identifier.use" />
      <short value="usual | official | temp | secondary | old (If known)" />
      <definition value="해당 식별자(identifier)의 목적" />
      <comment value="Applications can assume that an identifier is permanent unless it explicitly says that it is temporary." />
      <requirements value="Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.use" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="code" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isModifier value="true" />
      <isModifierReason value="This is labeled as &quot;Is Modifier&quot; because applications should not mistake a temporary id for a permanent one." />
      <isSummary value="true" />
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="IdentifierUse" />
        </extension>
        <strength value="required" />
        <description value="Identifies the purpose for this identifier, if known ." />
        <valueSet value="http://hl7.org/fhir/ValueSet/identifier-use|4.0.1" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="N/A" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="Role.code or implied by context" />
      </mapping>
    </element>
    <element id="Composition.section.section.author.identifier.type">
      <path value="Composition.section.section.author.identifier.type" />
      <short value="식별자(identifier)에 대한 설명" />
      <definition value="특정 목적으로 사용되는 식별자(identifier)를 결정하기 위해 사용하는 식별자(identifier)의 코드화된(coded) 유형(type)을 나타냄." />
      <comment value="This element deals only with general categories of identifiers.  It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage.   Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type." />
      <requirements value="Allows users to make use of identifiers when the identifier system is not known." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.type" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="CodeableConcept" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="IdentifierType" />
        </extension>
        <strength value="extensible" />
        <description value="A coded type for an identifier that can be used to determine which identifier to use for a specific purpose." />
        <valueSet value="http://hl7.org/fhir/ValueSet/identifier-type" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CE/CNE/CWE" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CD" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept rdfs:subClassOf dt:CD" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.5" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="Role.code or implied by context" />
      </mapping>
    </element>
    <element id="Composition.section.section.author.identifier.type.id">
      <path value="Composition.section.section.author.identifier.type.id" />
      <representation value="xmlAttr" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.section.section.author.identifier.type.extension">
      <path value="Composition.section.section.author.identifier.type.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.section.section.author.identifier.type.coding">
      <path value="Composition.section.section.author.identifier.type.coding" />
      <short value="용어체계(terminology system)에 의해 정의된 코드(code)" />
      <definition value="용어체계(terminology system)에 의해 정의된 코드(code) 참조" />
      <comment value="Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information.  Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true." />
      <requirements value="Allows for alternative encodings within a code system, and translations to other code systems." />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="CodeableConcept.coding" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Coding" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CE/CNE/CWE subset one of the sets of component 1-3 or 4-6" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CV" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding rdfs:subClassOf dt:CDCoding" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.1-8, C*E.10-22" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="union(., ./translation)" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding" />
      </mapping>
    </element>
    <element id="Composition.section.section.author.identifier.type.coding.id">
      <path value="Composition.section.section.author.identifier.type.coding.id" />
      <representation value="xmlAttr" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.section.section.author.identifier.type.coding.extension">
      <path value="Composition.section.section.author.identifier.type.coding.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.section.section.author.identifier.type.coding.system">
      <path value="Composition.section.section.author.identifier.type.coding.system" />
      <short value="용어체계 식별(Identity of terminology system)" />
      <definition value="코드(code)에서 기호(symbol)의 의미를 정의하는 CodeSystem[]를 식별" />
      <comment value="The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...).  OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously." />
      <requirements value="Need to be unambiguous about the source of the definition of the symbol." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.system" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="uri" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.3" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./codeSystem" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem" />
      </mapping>
    </element>
    <element id="Composition.section.section.author.identifier.type.coding.version">
      <path value="Composition.section.section.author.identifier.type.coding.version" />
      <short value="해당 시스템의 버전 정보 - 필요한 경우" />
      <definition value="해당 코드(code)를 선택한 시점에 사용된 CodeSystem[]의 버전임. 올바로 관리된 CodeSystem[]은 코드(code)의 의미가 버전과 관계없이 일관적이므로 버전을 보고할 필요가 없음. 그러나 CodeSystem[]의 관리 상태는 지속적으로 보장할 수 없는 부분이며, 코드(code)의 의미가 일관적임을 보장할 수 없는 경우 버전이 교체되어야 함." />
      <comment value="Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.version" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.7" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./codeSystemVersion" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion" />
      </mapping>
    </element>
    <element id="Composition.section.section.author.identifier.type.coding.code">
      <path value="Composition.section.section.author.identifier.type.coding.code" />
      <short value="시스템에 정의된 구문(syntax)의 기호(symbol)" />
      <definition value="시스템에 정의된 구문(syntax)의 기호(symbol). 기호(symbol)은 CodeSystem[]에 의해 정의된 구문에서 미리 정의된 코드(code) 또는 표현(expression)일 수 있음. (예: post-coordination)" />
      <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" />
      <requirements value="Need to refer to a particular code in the system." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.code" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="code" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.1" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./code" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code" />
      </mapping>
    </element>
    <element id="Composition.section.section.author.identifier.type.coding.display">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="Composition.section.section.author.identifier.type.coding.display" />
      <short value="시스템에 정의된 표기(representation)" />
      <definition value="시스템의 규칙(rules)에 따른, 시스템에서 코드(code)의 의미 표기(representation)" />
      <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" />
      <requirements value="Need to be able to carry a human-readable meaning of the code for readers that do not know  the system." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.display" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.2 - but note this is not well followed" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CV.displayName" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName" />
      </mapping>
    </element>
    <element id="Composition.section.section.author.identifier.type.coding.userSelected">
      <path value="Composition.section.section.author.identifier.type.coding.userSelected" />
      <short value="해당 코딩(coding)이 사용자(user)에 의해 직접(directly) 선택되었는지 여부" />
      <definition value="해당 코딩(coding)이 사용자(user)에 의해 직접 선택되었음을 나타냄 - (예) 사용가능한 항목(item)의 선택 목록(list) 중 하나 (코드 또는 디스플레이 )" />
      <comment value="Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely." />
      <requirements value="This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.userSelected" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="boolean" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="Sometimes implied by being first" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CD.codingRationale" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map;   fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [     fhir:source &quot;true&quot;;     fhir:target dt:CDCoding.codingRationale\#O   ]" />
      </mapping>
    </element>
    <element id="Composition.section.section.author.identifier.type.text">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="Composition.section.section.author.identifier.type.text" />
      <short value="개념(concept)에 대한 일반 텍스트 표현 (plain text representation)" />
      <definition value="데이터를 입력한 사용자(user)의 입장에서 보거나(seen)/선택하거나(selected)/언급한대로(uttered)의 개념(concept), 혹은 사용자(user)가 의도한 의미를 사람이 사용하는 언어로 표현한 것임." />
      <comment value="Very often the text is the same as a displayName of one of the codings." />
      <requirements value="The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="CodeableConcept.text" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.9. But note many systems use C*E.2 for this" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./originalText[mediaType/code=&quot;text/plain&quot;]/data" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText" />
      </mapping>
    </element>
    <element id="Composition.section.section.author.identifier.system">
      <path value="Composition.section.section.author.identifier.system" />
      <short value="식별자(identifier) 값의 네임스페이스(namespace)" />
      <definition value="설정 값에 대한 네임스페이스 (namespace), 즉 고유(unique)한 설정값을 설명하는 URL을 설정함." />
      <comment value="Identifier.system is always case sensitive." />
      <requirements value="There are many sets  of identifiers.  To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.system" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="uri" />
      </type>
      <example>
        <label value="General" />
        <valueUri value="http://www.acme.com/identifiers/patient" />
      </example>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.4 / EI-2-4" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="II.root or Role.id.root" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="./IdentifierType" />
      </mapping>
    </element>
    <element id="Composition.section.section.author.identifier.value">
      <path value="Composition.section.section.author.identifier.value" />
      <short value="고유(unique)한 값(value)" />
      <definition value="일반적으로 사용자(user)와 관련(relevant)이 있으며, 시스템 컨텍스트(context) 내에서 고유(unique)한 식별자(identifier)의 일부분임." />
      <comment value="If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986.  The value's primary purpose is computational mapping.  As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.)  A value formatted for human display can be conveyed using the [Rendered Value extension](extension-rendered-value.html). Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.value" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <example>
        <label value="General" />
        <valueString value="123456" />
      </example>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.1 / EI.1" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root)" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="./Value" />
      </mapping>
    </element>
    <element id="Composition.section.section.author.identifier.period">
      <path value="Composition.section.section.author.identifier.period" />
      <short value="식별자(identifier)의 유효 기간" />
      <definition value="식별자(identifier)가 사용 가능했거나 가능한 기간을 나타냄." />
      <comment value="A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. &quot;the patient was an inpatient of the hospital for this time range&quot;) or one value from the range applies (e.g. &quot;give to the patient between these two times&quot;).&#xA;&#xA;Period is not used for a duration (a measure of elapsed time). See [Duration](datatypes.html#Duration)." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.period" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="Period" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="per-1" />
        <severity value="error" />
        <human value="If present, start SHALL have a lower value than end" />
        <expression value="start.hasValue().not() or end.hasValue().not() or (start &lt;= end)" />
        <xpath value="not(exists(f:start/@value)) or not(exists(f:end/@value)) or (xs:dateTime(f:start/@value) &lt;= xs:dateTime(f:end/@value))" />
        <source value="http://hl7.org/fhir/StructureDefinition/Period" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="DR" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="IVL&lt;TS&gt;[lowClosed=&quot;true&quot; and highClosed=&quot;true&quot;] or URG&lt;TS&gt;[lowClosed=&quot;true&quot; and highClosed=&quot;true&quot;]" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.7 + CX.8" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="Role.effectiveTime or implied by context" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="./StartDate and ./EndDate" />
      </mapping>
    </element>
    <element id="Composition.section.section.author.identifier.period.id">
      <path value="Composition.section.section.author.identifier.period.id" />
      <representation value="xmlAttr" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.section.section.author.identifier.period.extension">
      <path value="Composition.section.section.author.identifier.period.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.section.section.author.identifier.period.start">
      <path value="Composition.section.section.author.identifier.period.start" />
      <short value="해당 유효 기간의 시작 시점 (설정된 날짜 포함)" />
      <definition value="해당 유효 기간이 시작되는 시점을 나타냄. 유효 기간은 시작 시점으로 설정된 날짜를 포함함." />
      <comment value="If the low element is missing, the meaning is that the low boundary is not known." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Period.start" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="dateTime" />
      </type>
      <condition value="ele-1" />
      <condition value="per-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="DR.1" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./low" />
      </mapping>
    </element>
    <element id="Composition.section.section.author.identifier.period.end">
      <path value="Composition.section.section.author.identifier.period.end" />
      <short value="해당 유효 기간의 종료 시점 (설정된 날짜 포함)" />
      <definition value="기간의 종료. 기간의 종료가 누락된 경우, 인스턴스가 생성될 때 끝이 알려지거나 계획되지 않았음을 의미함. 시작일은 과거일 수 있고 종료일은 미래일 수 있음. 이는 해당 기간이 해당 시간에 종료될 예정임을 의미함" />
      <comment value="The high value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has an end value of 2012-02-03." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Period.end" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="dateTime" />
      </type>
      <meaningWhenMissing value="If the end of the period is missing, it means that the period is ongoing" />
      <condition value="ele-1" />
      <condition value="per-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="DR.2" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./high" />
      </mapping>
    </element>
    <element id="Composition.section.section.author.identifier.assigner">
      <path value="Composition.section.section.author.identifier.assigner" />
      <short value="식별자(identifier)를 발급한 조직(단순 텍스트 기입 가능)" />
      <definition value="식별자(identifier)를 발급/관리하는 조직(organization)" />
      <comment value="The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.assigner" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="Reference" />
        <targetProfile value="http://hl7.org/fhir/StructureDefinition/Organization" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ref-1" />
        <severity value="error" />
        <human value="SHALL have a contained resource if a local reference is provided" />
        <expression value="reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))" />
        <xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Reference" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.4 / (CX.4,CX.9,CX.10)" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="II.assigningAuthorityName but note that this is an improper use by the definition of the field.  Also Role.scoper" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="./IdentifierIssuingAuthority" />
      </mapping>
    </element>
    <element id="Composition.section.section.author.display">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="Composition.section.section.author.display" />
      <short value="해당 리소스(resource)에 대한 대체 텍스트(alternative text)" />
      <definition value="리소스(resource) 참조 외에도 리소스(resource)를 식별하기 위한 일반 텍스트 설명임." />
      <comment value="This is generally not the same as the Resource.text of the referenced resource.  The purpose is to identify what's being referenced, not to fully describe it." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Reference.display" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.section.section.focus">
      <path value="Composition.section.section.focus" />
      <short value="Composition[]의 주제에 관한 것 아닐 때, 섹션이 누구/무엇에 관한 것인지에 관한 내용" />
      <definition value="Composition[]의 대상은 아니면서, (환자 대상의 경우) 배우자, 부모, 태아 또는 기증자와 같이 주제와 관련된 어떤것 또는 누군가를 나타낼 때 섹션의 실제 초점을 나타냄. focus항목이 지정되지 않을경우, focus는 parent 섹션의 focus 또는 Composition[] 자신을 대상으로 함. focus를 포함한 섹션은 논리적 subject(환자, 환자, 주제, 포커스 등)가 섹션 focus와 일치하는 리소스 또는 논리적 subject(일부 리소스)가 없는 리소스를 포함해야 함." />
      <comment value="Typically, sections in a doument are about the subject of the document, whether that is a  patient, or group of patients, location, or device, or whatever. For some kind of documents, some sections actually contain data about related entities. Typical examples are  a section in a newborn discharge summary concerning the mother, or family history documents, with a section about each family member, though there are many other examples." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Composition.section.focus" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="Reference" />
        <targetProfile value="http://hl7.org/fhir/StructureDefinition/Resource" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ref-1" />
        <severity value="error" />
        <human value="SHALL have a contained resource if a local reference is provided" />
        <expression value="reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))" />
        <xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Reference" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" />
      </mapping>
      <mapping>
        <identity value="cda" />
        <map value=".subject? (CDA did not differentiate between subject and focus)" />
      </mapping>
    </element>
    <element id="Composition.section.section.focus.id">
      <path value="Composition.section.section.focus.id" />
      <representation value="xmlAttr" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.section.section.focus.extension">
      <path value="Composition.section.section.focus.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.section.section.focus.reference">
      <path value="Composition.section.section.focus.reference" />
      <short value="문자로 표현된(literal) 참조, 상대적, 내부적 혹은 절대적인 URL" />
      <definition value="다른 리소스(resource)를 찾을 수 있는 위치에 대한 참조를 의미함. 해당 참조는 service base URL에 상대적인(relative) 경우 상대적 참조, 혹은 해당 리소스(resource)를 찾을 수 있는 위치인 절대(absolute) URL일 수 있음. 해당 참조는 버전에 따라 다를 수 있음. 해당 참조가 FHIR RESTful 서버가 아닌 경우, 버전에 따라 다른 것으로 간주함. 내부 구문(Internal Fragment) 참조('#'으로 시작)는 포함되어 있는 리소스(resource)를 참조함." />
      <comment value="Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries.   Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure &quot;/[type]/[id]&quot; then it should be assumed that the reference is to a FHIR RESTful server." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Reference.reference" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <condition value="ref-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.section.section.focus.type">
      <path value="Composition.section.section.focus.type" />
      <short value="참조(reference)가 참조(refer)하는 유형(type)  (예. &quot;Patient&quot;)" />
      <definition value="참조 대상의 예상 형식(expected type).  Reference.type과 Reference.reference가 모두 채워지고 Reference.reference가 FHIR URL이면 두가지 모두 일치해야함. 유형(type)은이 참조가 참조하는 유형(type) 인 리소스(resource) 정의의 표준(Canonical) URL임. 참조는 http://hl7.org/fhir/StructureDefinition/과 관련된 URL임. (예) &quot; 환자 &quot; http://hl7.org/fhir/StructureDefinition/Patient에 대한 참조. 절대(absolute) URL은 논리 모델에만 허용됨 (리소스(resource)가 아닌 논리 모델의 참조에서만 사용할 수 있음)." />
      <comment value="This element is used to indicate the type of  the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Reference.type" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="uri" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="FHIRResourceTypeExt" />
        </extension>
        <strength value="extensible" />
        <description value="Aa resource (or, for logical models, the URI of the logical model)." />
        <valueSet value="http://hl7.org/fhir/ValueSet/resource-types" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.section.section.focus.identifier">
      <path value="Composition.section.section.focus.identifier" />
      <short value="문자로 표현된(literal) 참조를 알 수 없는 경우 사용하는, 논리적(logical) 참조" />
      <definition value="대상 리소스(resource)의 식별자(identifier). 이것은 다른 리소스(resource)를 직접 참조할 방법이 없을 때 사용- 해당 엔티티(entity)가 FHIR 서버를 통해 사용할 수 없거나  리소스(resource) 작성자가 알려진 식별자(identifier)를 실제 위치로 변활할 방법이 없기 때문에 이 방법이 사용됨. Reference.identifier가 실제로 FHIR 인스턴스로 노출되는 것을 가리킬(point) 필요는 없지만, FHIR 인스턴스로 노출될 것으로 예상되는 비즈니스 개념(concept)을 가리켜야하며, 해당 인스턴스는 참조가 허용되는 FHIR 리소스 타입(resource type)이여야 함." />
      <comment value="When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. &#xA;&#xA;When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference&#xA;&#xA;Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.&#xA;&#xA;Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference.  For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport).  One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any)." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Reference.identifier" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="Identifier" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX / EI (occasionally, more often EI maps to a resource id or a URL)" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs.  Also maps to Role[classCode=IDENT]" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="Identifier" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value=".identifier" />
      </mapping>
    </element>
    <element id="Composition.section.section.focus.identifier.id">
      <path value="Composition.section.section.focus.identifier.id" />
      <representation value="xmlAttr" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.section.section.focus.identifier.extension">
      <path value="Composition.section.section.focus.identifier.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.section.section.focus.identifier.use">
      <path value="Composition.section.section.focus.identifier.use" />
      <short value="usual | official | temp | secondary | old (If known)" />
      <definition value="해당 식별자(identifier)의 목적" />
      <comment value="Applications can assume that an identifier is permanent unless it explicitly says that it is temporary." />
      <requirements value="Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.use" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="code" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isModifier value="true" />
      <isModifierReason value="This is labeled as &quot;Is Modifier&quot; because applications should not mistake a temporary id for a permanent one." />
      <isSummary value="true" />
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="IdentifierUse" />
        </extension>
        <strength value="required" />
        <description value="Identifies the purpose for this identifier, if known ." />
        <valueSet value="http://hl7.org/fhir/ValueSet/identifier-use|4.0.1" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="N/A" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="Role.code or implied by context" />
      </mapping>
    </element>
    <element id="Composition.section.section.focus.identifier.type">
      <path value="Composition.section.section.focus.identifier.type" />
      <short value="식별자(identifier)에 대한 설명" />
      <definition value="특정 목적으로 사용되는 식별자(identifier)를 결정하기 위해 사용하는 식별자(identifier)의 코드화된(coded) 유형(type)을 나타냄." />
      <comment value="This element deals only with general categories of identifiers.  It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage.   Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type." />
      <requirements value="Allows users to make use of identifiers when the identifier system is not known." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.type" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="CodeableConcept" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="IdentifierType" />
        </extension>
        <strength value="extensible" />
        <description value="A coded type for an identifier that can be used to determine which identifier to use for a specific purpose." />
        <valueSet value="http://hl7.org/fhir/ValueSet/identifier-type" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CE/CNE/CWE" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CD" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept rdfs:subClassOf dt:CD" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.5" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="Role.code or implied by context" />
      </mapping>
    </element>
    <element id="Composition.section.section.focus.identifier.type.id">
      <path value="Composition.section.section.focus.identifier.type.id" />
      <representation value="xmlAttr" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.section.section.focus.identifier.type.extension">
      <path value="Composition.section.section.focus.identifier.type.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.section.section.focus.identifier.type.coding">
      <path value="Composition.section.section.focus.identifier.type.coding" />
      <short value="용어체계(terminology system)에 의해 정의된 코드(code)" />
      <definition value="용어체계(terminology system)에 의해 정의된 코드(code) 참조" />
      <comment value="Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information.  Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true." />
      <requirements value="Allows for alternative encodings within a code system, and translations to other code systems." />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="CodeableConcept.coding" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Coding" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CE/CNE/CWE subset one of the sets of component 1-3 or 4-6" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CV" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding rdfs:subClassOf dt:CDCoding" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.1-8, C*E.10-22" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="union(., ./translation)" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding" />
      </mapping>
    </element>
    <element id="Composition.section.section.focus.identifier.type.coding.id">
      <path value="Composition.section.section.focus.identifier.type.coding.id" />
      <representation value="xmlAttr" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.section.section.focus.identifier.type.coding.extension">
      <path value="Composition.section.section.focus.identifier.type.coding.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.section.section.focus.identifier.type.coding.system">
      <path value="Composition.section.section.focus.identifier.type.coding.system" />
      <short value="용어체계 식별(Identity of terminology system)" />
      <definition value="코드(code)에서 기호(symbol)의 의미를 정의하는 CodeSystem[]를 식별" />
      <comment value="The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...).  OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously." />
      <requirements value="Need to be unambiguous about the source of the definition of the symbol." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.system" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="uri" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.3" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./codeSystem" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem" />
      </mapping>
    </element>
    <element id="Composition.section.section.focus.identifier.type.coding.version">
      <path value="Composition.section.section.focus.identifier.type.coding.version" />
      <short value="해당 시스템의 버전 정보 - 필요한 경우" />
      <definition value="해당 코드(code)를 선택한 시점에 사용된 CodeSystem[]의 버전임. 올바로 관리된 CodeSystem[]은 코드(code)의 의미가 버전과 관계없이 일관적이므로 버전을 보고할 필요가 없음. 그러나 CodeSystem[]의 관리 상태는 지속적으로 보장할 수 없는 부분이며, 코드(code)의 의미가 일관적임을 보장할 수 없는 경우 버전이 교체되어야 함." />
      <comment value="Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.version" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.7" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./codeSystemVersion" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion" />
      </mapping>
    </element>
    <element id="Composition.section.section.focus.identifier.type.coding.code">
      <path value="Composition.section.section.focus.identifier.type.coding.code" />
      <short value="시스템에 정의된 구문(syntax)의 기호(symbol)" />
      <definition value="시스템에 정의된 구문(syntax)의 기호(symbol). 기호(symbol)은 CodeSystem[]에 의해 정의된 구문에서 미리 정의된 코드(code) 또는 표현(expression)일 수 있음. (예: post-coordination)" />
      <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" />
      <requirements value="Need to refer to a particular code in the system." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.code" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="code" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.1" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./code" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code" />
      </mapping>
    </element>
    <element id="Composition.section.section.focus.identifier.type.coding.display">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="Composition.section.section.focus.identifier.type.coding.display" />
      <short value="시스템에 정의된 표기(representation)" />
      <definition value="시스템의 규칙(rules)에 따른, 시스템에서 코드(code)의 의미 표기(representation)" />
      <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" />
      <requirements value="Need to be able to carry a human-readable meaning of the code for readers that do not know  the system." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.display" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.2 - but note this is not well followed" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CV.displayName" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName" />
      </mapping>
    </element>
    <element id="Composition.section.section.focus.identifier.type.coding.userSelected">
      <path value="Composition.section.section.focus.identifier.type.coding.userSelected" />
      <short value="해당 코딩(coding)이 사용자(user)에 의해 직접(directly) 선택되었는지 여부" />
      <definition value="해당 코딩(coding)이 사용자(user)에 의해 직접 선택되었음을 나타냄 - (예) 사용가능한 항목(item)의 선택 목록(list) 중 하나 (코드 또는 디스플레이 )" />
      <comment value="Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely." />
      <requirements value="This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.userSelected" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="boolean" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="Sometimes implied by being first" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CD.codingRationale" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map;   fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [     fhir:source &quot;true&quot;;     fhir:target dt:CDCoding.codingRationale\#O   ]" />
      </mapping>
    </element>
    <element id="Composition.section.section.focus.identifier.type.text">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="Composition.section.section.focus.identifier.type.text" />
      <short value="개념(concept)에 대한 일반 텍스트 표현 (plain text representation)" />
      <definition value="데이터를 입력한 사용자(user)의 입장에서 보거나(seen)/선택하거나(selected)/언급한대로(uttered)의 개념(concept), 혹은 사용자(user)가 의도한 의미를 사람이 사용하는 언어로 표현한 것임." />
      <comment value="Very often the text is the same as a displayName of one of the codings." />
      <requirements value="The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="CodeableConcept.text" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.9. But note many systems use C*E.2 for this" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./originalText[mediaType/code=&quot;text/plain&quot;]/data" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText" />
      </mapping>
    </element>
    <element id="Composition.section.section.focus.identifier.system">
      <path value="Composition.section.section.focus.identifier.system" />
      <short value="식별자(identifier) 값의 네임스페이스(namespace)" />
      <definition value="설정 값에 대한 네임스페이스 (namespace), 즉 고유(unique)한 설정값을 설명하는 URL을 설정함." />
      <comment value="Identifier.system is always case sensitive." />
      <requirements value="There are many sets  of identifiers.  To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.system" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="uri" />
      </type>
      <example>
        <label value="General" />
        <valueUri value="http://www.acme.com/identifiers/patient" />
      </example>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.4 / EI-2-4" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="II.root or Role.id.root" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="./IdentifierType" />
      </mapping>
    </element>
    <element id="Composition.section.section.focus.identifier.value">
      <path value="Composition.section.section.focus.identifier.value" />
      <short value="고유(unique)한 값(value)" />
      <definition value="일반적으로 사용자(user)와 관련(relevant)이 있으며, 시스템 컨텍스트(context) 내에서 고유(unique)한 식별자(identifier)의 일부분임." />
      <comment value="If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986.  The value's primary purpose is computational mapping.  As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.)  A value formatted for human display can be conveyed using the [Rendered Value extension](extension-rendered-value.html). Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.value" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <example>
        <label value="General" />
        <valueString value="123456" />
      </example>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.1 / EI.1" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root)" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="./Value" />
      </mapping>
    </element>
    <element id="Composition.section.section.focus.identifier.period">
      <path value="Composition.section.section.focus.identifier.period" />
      <short value="식별자(identifier)의 유효 기간" />
      <definition value="식별자(identifier)가 사용 가능했거나 가능한 기간을 나타냄." />
      <comment value="A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. &quot;the patient was an inpatient of the hospital for this time range&quot;) or one value from the range applies (e.g. &quot;give to the patient between these two times&quot;).&#xA;&#xA;Period is not used for a duration (a measure of elapsed time). See [Duration](datatypes.html#Duration)." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.period" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="Period" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="per-1" />
        <severity value="error" />
        <human value="If present, start SHALL have a lower value than end" />
        <expression value="start.hasValue().not() or end.hasValue().not() or (start &lt;= end)" />
        <xpath value="not(exists(f:start/@value)) or not(exists(f:end/@value)) or (xs:dateTime(f:start/@value) &lt;= xs:dateTime(f:end/@value))" />
        <source value="http://hl7.org/fhir/StructureDefinition/Period" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="DR" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="IVL&lt;TS&gt;[lowClosed=&quot;true&quot; and highClosed=&quot;true&quot;] or URG&lt;TS&gt;[lowClosed=&quot;true&quot; and highClosed=&quot;true&quot;]" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.7 + CX.8" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="Role.effectiveTime or implied by context" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="./StartDate and ./EndDate" />
      </mapping>
    </element>
    <element id="Composition.section.section.focus.identifier.period.id">
      <path value="Composition.section.section.focus.identifier.period.id" />
      <representation value="xmlAttr" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.section.section.focus.identifier.period.extension">
      <path value="Composition.section.section.focus.identifier.period.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.section.section.focus.identifier.period.start">
      <path value="Composition.section.section.focus.identifier.period.start" />
      <short value="해당 유효 기간의 시작 시점 (설정된 날짜 포함)" />
      <definition value="해당 유효 기간이 시작되는 시점을 나타냄. 유효 기간은 시작 시점으로 설정된 날짜를 포함함." />
      <comment value="If the low element is missing, the meaning is that the low boundary is not known." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Period.start" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="dateTime" />
      </type>
      <condition value="ele-1" />
      <condition value="per-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="DR.1" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./low" />
      </mapping>
    </element>
    <element id="Composition.section.section.focus.identifier.period.end">
      <path value="Composition.section.section.focus.identifier.period.end" />
      <short value="해당 유효 기간의 종료 시점 (설정된 날짜 포함)" />
      <definition value="기간의 종료. 기간의 종료가 누락된 경우, 인스턴스가 생성될 때 끝이 알려지거나 계획되지 않았음을 의미함. 시작일은 과거일 수 있고 종료일은 미래일 수 있음. 이는 해당 기간이 해당 시간에 종료될 예정임을 의미함" />
      <comment value="The high value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has an end value of 2012-02-03." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Period.end" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="dateTime" />
      </type>
      <meaningWhenMissing value="If the end of the period is missing, it means that the period is ongoing" />
      <condition value="ele-1" />
      <condition value="per-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="DR.2" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./high" />
      </mapping>
    </element>
    <element id="Composition.section.section.focus.identifier.assigner">
      <path value="Composition.section.section.focus.identifier.assigner" />
      <short value="식별자(identifier)를 발급한 조직(단순 텍스트 기입 가능)" />
      <definition value="식별자(identifier)를 발급/관리하는 조직(organization)" />
      <comment value="The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.assigner" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="Reference" />
        <targetProfile value="http://hl7.org/fhir/StructureDefinition/Organization" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ref-1" />
        <severity value="error" />
        <human value="SHALL have a contained resource if a local reference is provided" />
        <expression value="reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))" />
        <xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Reference" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.4 / (CX.4,CX.9,CX.10)" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="II.assigningAuthorityName but note that this is an improper use by the definition of the field.  Also Role.scoper" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="./IdentifierIssuingAuthority" />
      </mapping>
    </element>
    <element id="Composition.section.section.focus.display">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="Composition.section.section.focus.display" />
      <short value="해당 리소스(resource)에 대한 대체 텍스트(alternative text)" />
      <definition value="리소스(resource) 참조 외에도 리소스(resource)를 식별하기 위한 일반 텍스트 설명임." />
      <comment value="This is generally not the same as the Resource.text of the referenced resource.  The purpose is to identify what's being referenced, not to fully describe it." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Reference.display" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.section.section.text">
      <path value="Composition.section.section.text" />
      <short value="부문(section)의 내용 요약" />
      <definition value="읽는 사람이 리소스의 내용을 알 수 있도록 되어있는 설명을 의미하며, 부문 (section)의 컨텐츠를 포함하고 있음. 해당 설명 내에 구조화된 데이터를 모두 인코딩할 필요는 없지만, &quot;임상적으로 안전&quot; 하도록 세부사항을 충분히 포함해야 함." />
      <comment value="Document profiles may define what content should be represented in the narrative to ensure clinical safety." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Composition.section.text" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="Narrative" />
      </type>
      <condition value="ele-1" />
      <condition value="cmp-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value=".text" />
      </mapping>
      <mapping>
        <identity value="cda" />
        <map value=".text" />
      </mapping>
    </element>
    <element id="Composition.section.section.text.id">
      <path value="Composition.section.section.text.id" />
      <representation value="xmlAttr" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.section.section.text.extension">
      <path value="Composition.section.section.text.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.section.section.text.status">
      <path value="Composition.section.section.text.status" />
      <short value="generated | extensions | additional | empty" />
      <definition value="설명의 상태. 자동으로 생성 되었는지, 사람에 의해 수동적으로 생성되었는지, 데이터 추가가 가능한지 여부를 나타냄." />
      <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" />
      <min value="1" />
      <max value="1" />
      <base>
        <path value="Narrative.status" />
        <min value="1" />
        <max value="1" />
      </base>
      <type>
        <code value="code" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="NarrativeStatus" />
        </extension>
        <strength value="required" />
        <description value="The status of a resource narrative." />
        <valueSet value="http://hl7.org/fhir/ValueSet/narrative-status|4.0.1" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.section.section.text.div">
      <path value="Composition.section.section.text.div" />
      <short value="제한된 XHTML 컨텐츠(content)" />
      <definition value="설명의 실제 컨텐츠(content). 가장 기본적인 XHTML 버전임." />
      <comment value="The contents of the html element are an XHTML fragment containing only the basic html formatting elements described in chapters 7-11 and 15 of the HTML 4.0 standard, &lt;a&gt; elements (either name or href), images and internally contained stylesheets. The XHTML content SHALL NOT contain a head, a body, external stylesheet references, scripts, forms, base/link/xlink, frames, iframes and objects." />
      <min value="1" />
      <max value="1" />
      <base>
        <path value="Narrative.div" />
        <min value="1" />
        <max value="1" />
      </base>
      <type>
        <code value="xhtml" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="txt-1" />
        <severity value="error" />
        <human value="The narrative SHALL contain only the basic html formatting elements and attributes described in chapters 7-11 (except section 4 of chapter 9) and 15 of the HTML 4.0 standard, &lt;a&gt; elements (either name or href), images and internally contained style attributes" />
        <expression value="htmlChecks()" />
        <xpath value="not(descendant-or-self::*[not(local-name(.)=('a', 'abbr', 'acronym', 'b', 'big', 'blockquote', 'br', 'caption', 'cite', 'code', 'col', 'colgroup', 'dd', 'dfn', 'div', 'dl', 'dt', 'em', 'h1', 'h2', 'h3', 'h4', 'h5', 'h6', 'hr', 'i', 'img', 'li', 'ol', 'p', 'pre', 'q', 'samp', 'small', 'span', 'strong', 'sub', 'sup', 'table', 'tbody', 'td', 'tfoot', 'th', 'thead', 'tr', 'tt', 'ul', 'var'))]) and not(descendant-or-self::*/@*[not(name(.)=('abbr', 'accesskey', 'align', 'alt', 'axis', 'bgcolor', 'border', 'cellhalign', 'cellpadding', 'cellspacing', 'cellvalign', 'char', 'charoff', 'charset', 'cite', 'class', 'colspan', 'compact', 'coords', 'dir', 'frame', 'headers', 'height', 'href', 'hreflang', 'hspace', 'id', 'lang', 'longdesc', 'name', 'nowrap', 'rel', 'rev', 'rowspan', 'rules', 'scope', 'shape', 'span', 'src', 'start', 'style', 'summary', 'tabindex', 'title', 'type', 'valign', 'value', 'vspace', 'width'))])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Narrative" />
      </constraint>
      <constraint>
        <key value="txt-2" />
        <severity value="error" />
        <human value="The narrative SHALL have some non-whitespace content" />
        <expression value="htmlChecks()" />
        <xpath value="descendant::text()[normalize-space(.)!=''] or descendant::h:img[@src]" />
        <source value="http://hl7.org/fhir/StructureDefinition/Narrative" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.section.section.mode">
      <path value="Composition.section.section.mode" />
      <short value="working | snapshot | changes" />
      <definition value="항목 목록(entry litst)이 어떻게 준비되었는지를 나타냄. 유지 관리하기에 적합한 작업 목록인지, 다른 소스로 부터 얻어진 항목의 스냅샷인지, 혹은 항목이 추가, 수정, 삭제 된 것으로 표시 될 수 있는지의 여부를 의미함." />
      <comment value="This element is labeled as a modifier because a change list must not be misunderstood as a complete list." />
      <requirements value="Sections are used in various ways, and it must be known in what way it is safe to use the entries in them." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Composition.section.mode" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="code" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="SectionMode" />
        </extension>
        <strength value="required" />
        <description value="The processing mode that applies to this section." />
        <valueSet value="http://hl7.org/fhir/ValueSet/list-mode|4.0.1" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="w5" />
        <map value="FiveWs.class" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value=".outBoundRelationship[typeCode=COMP].target[classCode=OBS&quot;].value" />
      </mapping>
      <mapping>
        <identity value="cda" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.section.section.orderedBy">
      <path value="Composition.section.section.orderedBy" />
      <short value="부문 (section) 내의 항목(entry)의 순서" />
      <definition value="항목(entry)들이 적용되는 순서를 지정함" />
      <comment value="Applications SHOULD render ordered lists in the order provided, but MAY allow users to re-order based on their own preferences as well. If there is no order specified, the order is unknown, though there may still be some order." />
      <requirements value="Important for presentation and rendering.  Lists may be sorted to place more important information first or to group related entries." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Composition.section.orderedBy" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="CodeableConcept" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="SectionEntryOrder" />
        </extension>
        <strength value="preferred" />
        <description value="What order applies to the items in the entry." />
        <valueSet value="http://hl7.org/fhir/ValueSet/list-order" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CE/CNE/CWE" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CD" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept rdfs:subClassOf dt:CD" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value=".outboundRelationship[typeCode=COMP].sequenceNumber &gt; 1" />
      </mapping>
      <mapping>
        <identity value="cda" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.section.section.orderedBy.id">
      <path value="Composition.section.section.orderedBy.id" />
      <representation value="xmlAttr" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.section.section.orderedBy.extension">
      <path value="Composition.section.section.orderedBy.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.section.section.orderedBy.coding">
      <path value="Composition.section.section.orderedBy.coding" />
      <short value="용어체계(terminology system)에 의해 정의된 코드(code)" />
      <definition value="용어체계(terminology system)에 의해 정의된 코드(code) 참조" />
      <comment value="Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information.  Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true." />
      <requirements value="Allows for alternative encodings within a code system, and translations to other code systems." />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="CodeableConcept.coding" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Coding" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CE/CNE/CWE subset one of the sets of component 1-3 or 4-6" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CV" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding rdfs:subClassOf dt:CDCoding" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.1-8, C*E.10-22" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="union(., ./translation)" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding" />
      </mapping>
    </element>
    <element id="Composition.section.section.orderedBy.coding.id">
      <path value="Composition.section.section.orderedBy.coding.id" />
      <representation value="xmlAttr" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.section.section.orderedBy.coding.extension">
      <path value="Composition.section.section.orderedBy.coding.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.section.section.orderedBy.coding.system">
      <path value="Composition.section.section.orderedBy.coding.system" />
      <short value="용어체계 식별(Identity of terminology system)" />
      <definition value="코드(code)에서 기호(symbol)의 의미를 정의하는 CodeSystem[]를 식별" />
      <comment value="The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...).  OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously." />
      <requirements value="Need to be unambiguous about the source of the definition of the symbol." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.system" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="uri" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.3" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./codeSystem" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem" />
      </mapping>
    </element>
    <element id="Composition.section.section.orderedBy.coding.version">
      <path value="Composition.section.section.orderedBy.coding.version" />
      <short value="해당 시스템의 버전 정보 - 필요한 경우" />
      <definition value="해당 코드(code)를 선택한 시점에 사용된 CodeSystem[]의 버전임. 올바로 관리된 CodeSystem[]은 코드(code)의 의미가 버전과 관계없이 일관적이므로 버전을 보고할 필요가 없음. 그러나 CodeSystem[]의 관리 상태는 지속적으로 보장할 수 없는 부분이며, 코드(code)의 의미가 일관적임을 보장할 수 없는 경우 버전이 교체되어야 함." />
      <comment value="Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.version" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.7" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./codeSystemVersion" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion" />
      </mapping>
    </element>
    <element id="Composition.section.section.orderedBy.coding.code">
      <path value="Composition.section.section.orderedBy.coding.code" />
      <short value="시스템에 정의된 구문(syntax)의 기호(symbol)" />
      <definition value="시스템에 정의된 구문(syntax)의 기호(symbol). 기호(symbol)은 CodeSystem[]에 의해 정의된 구문에서 미리 정의된 코드(code) 또는 표현(expression)일 수 있음. (예: post-coordination)" />
      <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" />
      <requirements value="Need to refer to a particular code in the system." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.code" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="code" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.1" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./code" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code" />
      </mapping>
    </element>
    <element id="Composition.section.section.orderedBy.coding.display">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="Composition.section.section.orderedBy.coding.display" />
      <short value="시스템에 정의된 표기(representation)" />
      <definition value="시스템의 규칙(rules)에 따른, 시스템에서 코드(code)의 의미 표기(representation)" />
      <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" />
      <requirements value="Need to be able to carry a human-readable meaning of the code for readers that do not know  the system." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.display" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.2 - but note this is not well followed" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CV.displayName" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName" />
      </mapping>
    </element>
    <element id="Composition.section.section.orderedBy.coding.userSelected">
      <path value="Composition.section.section.orderedBy.coding.userSelected" />
      <short value="해당 코딩(coding)이 사용자(user)에 의해 직접(directly) 선택되었는지 여부" />
      <definition value="해당 코딩(coding)이 사용자(user)에 의해 직접 선택되었음을 나타냄 - (예) 사용가능한 항목(item)의 선택 목록(list) 중 하나 (코드 또는 디스플레이 )" />
      <comment value="Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely." />
      <requirements value="This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.userSelected" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="boolean" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="Sometimes implied by being first" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CD.codingRationale" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map;   fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [     fhir:source &quot;true&quot;;     fhir:target dt:CDCoding.codingRationale\#O   ]" />
      </mapping>
    </element>
    <element id="Composition.section.section.orderedBy.text">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="Composition.section.section.orderedBy.text" />
      <short value="개념(concept)에 대한 일반 텍스트 표현 (plain text representation)" />
      <definition value="데이터를 입력한 사용자(user)의 입장에서 보거나(seen)/선택하거나(selected)/언급한대로(uttered)의 개념(concept), 혹은 사용자(user)가 의도한 의미를 사람이 사용하는 언어로 표현한 것임." />
      <comment value="Very often the text is the same as a displayName of one of the codings." />
      <requirements value="The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="CodeableConcept.text" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.9. But note many systems use C*E.2 for this" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./originalText[mediaType/code=&quot;text/plain&quot;]/data" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText" />
      </mapping>
    </element>
    <element id="Composition.section.section.entry">
      <path value="Composition.section.section.entry" />
      <short value="해당 부문(section)을 보조해주는 참조 데이터" />
      <definition value="부문 (section)의 설명이 파생되는 실제 리소스에 대한 참조" />
      <comment value="If there are no entries in the list, an emptyReason SHOULD be provided." />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Composition.section.entry" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Reference" />
        <targetProfile value="http://hl7.org/fhir/StructureDefinition/Resource" />
      </type>
      <condition value="ele-1" />
      <condition value="cmp-2" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ref-1" />
        <severity value="error" />
        <human value="SHALL have a contained resource if a local reference is provided" />
        <expression value="reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))" />
        <xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Reference" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value=".outboundRelationship[typeCode=COMP] or  .participation[typeCode=SBJ]" />
      </mapping>
      <mapping>
        <identity value="cda" />
        <map value=".entry" />
      </mapping>
    </element>
    <element id="Composition.section.section.entry.id">
      <path value="Composition.section.section.entry.id" />
      <representation value="xmlAttr" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.section.section.entry.extension">
      <path value="Composition.section.section.entry.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.section.section.entry.reference">
      <path value="Composition.section.section.entry.reference" />
      <short value="문자로 표현된(literal) 참조, 상대적, 내부적 혹은 절대적인 URL" />
      <definition value="다른 리소스(resource)를 찾을 수 있는 위치에 대한 참조를 의미함. 해당 참조는 service base URL에 상대적인(relative) 경우 상대적 참조, 혹은 해당 리소스(resource)를 찾을 수 있는 위치인 절대(absolute) URL일 수 있음. 해당 참조는 버전에 따라 다를 수 있음. 해당 참조가 FHIR RESTful 서버가 아닌 경우, 버전에 따라 다른 것으로 간주함. 내부 구문(Internal Fragment) 참조('#'으로 시작)는 포함되어 있는 리소스(resource)를 참조함." />
      <comment value="Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries.   Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure &quot;/[type]/[id]&quot; then it should be assumed that the reference is to a FHIR RESTful server." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Reference.reference" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <condition value="ref-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.section.section.entry.type">
      <path value="Composition.section.section.entry.type" />
      <short value="참조(reference)가 참조(refer)하는 유형(type)  (예. &quot;Patient&quot;)" />
      <definition value="참조 대상의 예상 형식(expected type).  Reference.type과 Reference.reference가 모두 채워지고 Reference.reference가 FHIR URL이면 두가지 모두 일치해야함. 유형(type)은이 참조가 참조하는 유형(type) 인 리소스(resource) 정의의 표준(Canonical) URL임. 참조는 http://hl7.org/fhir/StructureDefinition/과 관련된 URL임. (예) &quot; 환자 &quot; http://hl7.org/fhir/StructureDefinition/Patient에 대한 참조. 절대(absolute) URL은 논리 모델에만 허용됨 (리소스(resource)가 아닌 논리 모델의 참조에서만 사용할 수 있음)." />
      <comment value="This element is used to indicate the type of  the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Reference.type" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="uri" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="FHIRResourceTypeExt" />
        </extension>
        <strength value="extensible" />
        <description value="Aa resource (or, for logical models, the URI of the logical model)." />
        <valueSet value="http://hl7.org/fhir/ValueSet/resource-types" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.section.section.entry.identifier">
      <path value="Composition.section.section.entry.identifier" />
      <short value="문자로 표현된(literal) 참조를 알 수 없는 경우 사용하는, 논리적(logical) 참조" />
      <definition value="대상 리소스(resource)의 식별자(identifier). 이것은 다른 리소스(resource)를 직접 참조할 방법이 없을 때 사용- 해당 엔티티(entity)가 FHIR 서버를 통해 사용할 수 없거나  리소스(resource) 작성자가 알려진 식별자(identifier)를 실제 위치로 변활할 방법이 없기 때문에 이 방법이 사용됨. Reference.identifier가 실제로 FHIR 인스턴스로 노출되는 것을 가리킬(point) 필요는 없지만, FHIR 인스턴스로 노출될 것으로 예상되는 비즈니스 개념(concept)을 가리켜야하며, 해당 인스턴스는 참조가 허용되는 FHIR 리소스 타입(resource type)이여야 함." />
      <comment value="When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. &#xA;&#xA;When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference&#xA;&#xA;Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.&#xA;&#xA;Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference.  For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport).  One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any)." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Reference.identifier" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="Identifier" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX / EI (occasionally, more often EI maps to a resource id or a URL)" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs.  Also maps to Role[classCode=IDENT]" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="Identifier" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value=".identifier" />
      </mapping>
    </element>
    <element id="Composition.section.section.entry.identifier.id">
      <path value="Composition.section.section.entry.identifier.id" />
      <representation value="xmlAttr" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.section.section.entry.identifier.extension">
      <path value="Composition.section.section.entry.identifier.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.section.section.entry.identifier.use">
      <path value="Composition.section.section.entry.identifier.use" />
      <short value="usual | official | temp | secondary | old (If known)" />
      <definition value="해당 식별자(identifier)의 목적" />
      <comment value="Applications can assume that an identifier is permanent unless it explicitly says that it is temporary." />
      <requirements value="Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.use" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="code" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isModifier value="true" />
      <isModifierReason value="This is labeled as &quot;Is Modifier&quot; because applications should not mistake a temporary id for a permanent one." />
      <isSummary value="true" />
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="IdentifierUse" />
        </extension>
        <strength value="required" />
        <description value="Identifies the purpose for this identifier, if known ." />
        <valueSet value="http://hl7.org/fhir/ValueSet/identifier-use|4.0.1" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="N/A" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="Role.code or implied by context" />
      </mapping>
    </element>
    <element id="Composition.section.section.entry.identifier.type">
      <path value="Composition.section.section.entry.identifier.type" />
      <short value="식별자(identifier)에 대한 설명" />
      <definition value="특정 목적으로 사용되는 식별자(identifier)를 결정하기 위해 사용하는 식별자(identifier)의 코드화된(coded) 유형(type)을 나타냄." />
      <comment value="This element deals only with general categories of identifiers.  It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage.   Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type." />
      <requirements value="Allows users to make use of identifiers when the identifier system is not known." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.type" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="CodeableConcept" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="IdentifierType" />
        </extension>
        <strength value="extensible" />
        <description value="A coded type for an identifier that can be used to determine which identifier to use for a specific purpose." />
        <valueSet value="http://hl7.org/fhir/ValueSet/identifier-type" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CE/CNE/CWE" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CD" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept rdfs:subClassOf dt:CD" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.5" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="Role.code or implied by context" />
      </mapping>
    </element>
    <element id="Composition.section.section.entry.identifier.type.id">
      <path value="Composition.section.section.entry.identifier.type.id" />
      <representation value="xmlAttr" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.section.section.entry.identifier.type.extension">
      <path value="Composition.section.section.entry.identifier.type.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.section.section.entry.identifier.type.coding">
      <path value="Composition.section.section.entry.identifier.type.coding" />
      <short value="용어체계(terminology system)에 의해 정의된 코드(code)" />
      <definition value="용어체계(terminology system)에 의해 정의된 코드(code) 참조" />
      <comment value="Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information.  Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true." />
      <requirements value="Allows for alternative encodings within a code system, and translations to other code systems." />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="CodeableConcept.coding" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Coding" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CE/CNE/CWE subset one of the sets of component 1-3 or 4-6" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CV" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding rdfs:subClassOf dt:CDCoding" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.1-8, C*E.10-22" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="union(., ./translation)" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding" />
      </mapping>
    </element>
    <element id="Composition.section.section.entry.identifier.type.coding.id">
      <path value="Composition.section.section.entry.identifier.type.coding.id" />
      <representation value="xmlAttr" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.section.section.entry.identifier.type.coding.extension">
      <path value="Composition.section.section.entry.identifier.type.coding.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.section.section.entry.identifier.type.coding.system">
      <path value="Composition.section.section.entry.identifier.type.coding.system" />
      <short value="용어체계 식별(Identity of terminology system)" />
      <definition value="코드(code)에서 기호(symbol)의 의미를 정의하는 CodeSystem[]를 식별" />
      <comment value="The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...).  OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously." />
      <requirements value="Need to be unambiguous about the source of the definition of the symbol." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.system" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="uri" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.3" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./codeSystem" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem" />
      </mapping>
    </element>
    <element id="Composition.section.section.entry.identifier.type.coding.version">
      <path value="Composition.section.section.entry.identifier.type.coding.version" />
      <short value="해당 시스템의 버전 정보 - 필요한 경우" />
      <definition value="해당 코드(code)를 선택한 시점에 사용된 CodeSystem[]의 버전임. 올바로 관리된 CodeSystem[]은 코드(code)의 의미가 버전과 관계없이 일관적이므로 버전을 보고할 필요가 없음. 그러나 CodeSystem[]의 관리 상태는 지속적으로 보장할 수 없는 부분이며, 코드(code)의 의미가 일관적임을 보장할 수 없는 경우 버전이 교체되어야 함." />
      <comment value="Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.version" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.7" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./codeSystemVersion" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion" />
      </mapping>
    </element>
    <element id="Composition.section.section.entry.identifier.type.coding.code">
      <path value="Composition.section.section.entry.identifier.type.coding.code" />
      <short value="시스템에 정의된 구문(syntax)의 기호(symbol)" />
      <definition value="시스템에 정의된 구문(syntax)의 기호(symbol). 기호(symbol)은 CodeSystem[]에 의해 정의된 구문에서 미리 정의된 코드(code) 또는 표현(expression)일 수 있음. (예: post-coordination)" />
      <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" />
      <requirements value="Need to refer to a particular code in the system." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.code" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="code" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.1" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./code" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code" />
      </mapping>
    </element>
    <element id="Composition.section.section.entry.identifier.type.coding.display">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="Composition.section.section.entry.identifier.type.coding.display" />
      <short value="시스템에 정의된 표기(representation)" />
      <definition value="시스템의 규칙(rules)에 따른, 시스템에서 코드(code)의 의미 표기(representation)" />
      <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" />
      <requirements value="Need to be able to carry a human-readable meaning of the code for readers that do not know  the system." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.display" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.2 - but note this is not well followed" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CV.displayName" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName" />
      </mapping>
    </element>
    <element id="Composition.section.section.entry.identifier.type.coding.userSelected">
      <path value="Composition.section.section.entry.identifier.type.coding.userSelected" />
      <short value="해당 코딩(coding)이 사용자(user)에 의해 직접(directly) 선택되었는지 여부" />
      <definition value="해당 코딩(coding)이 사용자(user)에 의해 직접 선택되었음을 나타냄 - (예) 사용가능한 항목(item)의 선택 목록(list) 중 하나 (코드 또는 디스플레이 )" />
      <comment value="Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely." />
      <requirements value="This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.userSelected" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="boolean" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="Sometimes implied by being first" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CD.codingRationale" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map;   fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [     fhir:source &quot;true&quot;;     fhir:target dt:CDCoding.codingRationale\#O   ]" />
      </mapping>
    </element>
    <element id="Composition.section.section.entry.identifier.type.text">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="Composition.section.section.entry.identifier.type.text" />
      <short value="개념(concept)에 대한 일반 텍스트 표현 (plain text representation)" />
      <definition value="데이터를 입력한 사용자(user)의 입장에서 보거나(seen)/선택하거나(selected)/언급한대로(uttered)의 개념(concept), 혹은 사용자(user)가 의도한 의미를 사람이 사용하는 언어로 표현한 것임." />
      <comment value="Very often the text is the same as a displayName of one of the codings." />
      <requirements value="The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="CodeableConcept.text" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.9. But note many systems use C*E.2 for this" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./originalText[mediaType/code=&quot;text/plain&quot;]/data" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText" />
      </mapping>
    </element>
    <element id="Composition.section.section.entry.identifier.system">
      <path value="Composition.section.section.entry.identifier.system" />
      <short value="식별자(identifier) 값의 네임스페이스(namespace)" />
      <definition value="설정 값에 대한 네임스페이스 (namespace), 즉 고유(unique)한 설정값을 설명하는 URL을 설정함." />
      <comment value="Identifier.system is always case sensitive." />
      <requirements value="There are many sets  of identifiers.  To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.system" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="uri" />
      </type>
      <example>
        <label value="General" />
        <valueUri value="http://www.acme.com/identifiers/patient" />
      </example>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.4 / EI-2-4" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="II.root or Role.id.root" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="./IdentifierType" />
      </mapping>
    </element>
    <element id="Composition.section.section.entry.identifier.value">
      <path value="Composition.section.section.entry.identifier.value" />
      <short value="고유(unique)한 값(value)" />
      <definition value="일반적으로 사용자(user)와 관련(relevant)이 있으며, 시스템 컨텍스트(context) 내에서 고유(unique)한 식별자(identifier)의 일부분임." />
      <comment value="If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986.  The value's primary purpose is computational mapping.  As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.)  A value formatted for human display can be conveyed using the [Rendered Value extension](extension-rendered-value.html). Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.value" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <example>
        <label value="General" />
        <valueString value="123456" />
      </example>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.1 / EI.1" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root)" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="./Value" />
      </mapping>
    </element>
    <element id="Composition.section.section.entry.identifier.period">
      <path value="Composition.section.section.entry.identifier.period" />
      <short value="식별자(identifier)의 유효 기간" />
      <definition value="식별자(identifier)가 사용 가능했거나 가능한 기간을 나타냄." />
      <comment value="A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. &quot;the patient was an inpatient of the hospital for this time range&quot;) or one value from the range applies (e.g. &quot;give to the patient between these two times&quot;).&#xA;&#xA;Period is not used for a duration (a measure of elapsed time). See [Duration](datatypes.html#Duration)." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.period" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="Period" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="per-1" />
        <severity value="error" />
        <human value="If present, start SHALL have a lower value than end" />
        <expression value="start.hasValue().not() or end.hasValue().not() or (start &lt;= end)" />
        <xpath value="not(exists(f:start/@value)) or not(exists(f:end/@value)) or (xs:dateTime(f:start/@value) &lt;= xs:dateTime(f:end/@value))" />
        <source value="http://hl7.org/fhir/StructureDefinition/Period" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="DR" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="IVL&lt;TS&gt;[lowClosed=&quot;true&quot; and highClosed=&quot;true&quot;] or URG&lt;TS&gt;[lowClosed=&quot;true&quot; and highClosed=&quot;true&quot;]" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.7 + CX.8" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="Role.effectiveTime or implied by context" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="./StartDate and ./EndDate" />
      </mapping>
    </element>
    <element id="Composition.section.section.entry.identifier.period.id">
      <path value="Composition.section.section.entry.identifier.period.id" />
      <representation value="xmlAttr" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.section.section.entry.identifier.period.extension">
      <path value="Composition.section.section.entry.identifier.period.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.section.section.entry.identifier.period.start">
      <path value="Composition.section.section.entry.identifier.period.start" />
      <short value="해당 유효 기간의 시작 시점 (설정된 날짜 포함)" />
      <definition value="해당 유효 기간이 시작되는 시점을 나타냄. 유효 기간은 시작 시점으로 설정된 날짜를 포함함." />
      <comment value="If the low element is missing, the meaning is that the low boundary is not known." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Period.start" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="dateTime" />
      </type>
      <condition value="ele-1" />
      <condition value="per-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="DR.1" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./low" />
      </mapping>
    </element>
    <element id="Composition.section.section.entry.identifier.period.end">
      <path value="Composition.section.section.entry.identifier.period.end" />
      <short value="해당 유효 기간의 종료 시점 (설정된 날짜 포함)" />
      <definition value="기간의 종료. 기간의 종료가 누락된 경우, 인스턴스가 생성될 때 끝이 알려지거나 계획되지 않았음을 의미함. 시작일은 과거일 수 있고 종료일은 미래일 수 있음. 이는 해당 기간이 해당 시간에 종료될 예정임을 의미함" />
      <comment value="The high value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has an end value of 2012-02-03." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Period.end" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="dateTime" />
      </type>
      <meaningWhenMissing value="If the end of the period is missing, it means that the period is ongoing" />
      <condition value="ele-1" />
      <condition value="per-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="DR.2" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./high" />
      </mapping>
    </element>
    <element id="Composition.section.section.entry.identifier.assigner">
      <path value="Composition.section.section.entry.identifier.assigner" />
      <short value="식별자(identifier)를 발급한 조직(단순 텍스트 기입 가능)" />
      <definition value="식별자(identifier)를 발급/관리하는 조직(organization)" />
      <comment value="The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Identifier.assigner" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="Reference" />
        <targetProfile value="http://hl7.org/fhir/StructureDefinition/Organization" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ref-1" />
        <severity value="error" />
        <human value="SHALL have a contained resource if a local reference is provided" />
        <expression value="reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))" />
        <xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Reference" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CX.4 / (CX.4,CX.9,CX.10)" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="II.assigningAuthorityName but note that this is an improper use by the definition of the field.  Also Role.scoper" />
      </mapping>
      <mapping>
        <identity value="servd" />
        <map value="./IdentifierIssuingAuthority" />
      </mapping>
    </element>
    <element id="Composition.section.section.entry.display">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="Composition.section.section.entry.display" />
      <short value="해당 리소스(resource)에 대한 대체 텍스트(alternative text)" />
      <definition value="리소스(resource) 참조 외에도 리소스(resource)를 식별하기 위한 일반 텍스트 설명임." />
      <comment value="This is generally not the same as the Resource.text of the referenced resource.  The purpose is to identify what's being referenced, not to fully describe it." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Reference.display" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.section.section.emptyReason">
      <path value="Composition.section.section.emptyReason" />
      <short value="부문(section)이 비어있는 이유" />
      <definition value="부문(section)이 비어있는 경우는 항목이 비어있음. 비어있는 부문은 일반적으로 빈 이유를 설명하는 텍스트가 있음." />
      <comment value="The various reasons for an empty section make a significant interpretation to its interpretation. Note that this code is for use when the entire section content has been suppressed, and not for when individual items are omitted - implementers may consider using a text note or a flag on an entry in these cases." />
      <requirements value="Allows capturing things like &quot;none exist&quot; or &quot;not asked&quot; which can be important for most lists." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Composition.section.emptyReason" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="CodeableConcept" />
      </type>
      <condition value="ele-1" />
      <condition value="cmp-2" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <binding>
        <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName">
          <valueString value="SectionEmptyReason" />
        </extension>
        <strength value="preferred" />
        <description value="If a section is empty, why it is empty." />
        <valueSet value="http://hl7.org/fhir/ValueSet/list-empty-reason" />
      </binding>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CE/CNE/CWE" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CD" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept rdfs:subClassOf dt:CD" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value=".inboundRelationship[typeCode=SUBJ,code&lt;ListEmptyReason].value[type=CD]" />
      </mapping>
      <mapping>
        <identity value="cda" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.section.section.emptyReason.id">
      <path value="Composition.section.section.emptyReason.id" />
      <representation value="xmlAttr" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.section.section.emptyReason.extension">
      <path value="Composition.section.section.emptyReason.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.section.section.emptyReason.coding">
      <path value="Composition.section.section.emptyReason.coding" />
      <short value="용어체계(terminology system)에 의해 정의된 코드(code)" />
      <definition value="용어체계(terminology system)에 의해 정의된 코드(code) 참조" />
      <comment value="Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information.  Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true." />
      <requirements value="Allows for alternative encodings within a code system, and translations to other code systems." />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="CodeableConcept.coding" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Coding" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="CE/CNE/CWE subset one of the sets of component 1-3 or 4-6" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CV" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding rdfs:subClassOf dt:CDCoding" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.1-8, C*E.10-22" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="union(., ./translation)" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding" />
      </mapping>
    </element>
    <element id="Composition.section.section.emptyReason.coding.id">
      <path value="Composition.section.section.emptyReason.coding.id" />
      <representation value="xmlAttr" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Element.id" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type">
          <valueUrl value="string" />
        </extension>
        <code value="http://hl7.org/fhirpath/System.String" />
      </type>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
    </element>
    <element id="Composition.section.section.emptyReason.coding.extension">
      <path value="Composition.section.section.emptyReason.coding.extension" />
      <slicing>
        <discriminator>
          <type value="value" />
          <path value="url" />
        </discriminator>
        <description value="Extensions are always sliced by (at least) url" />
        <rules value="open" />
      </slicing>
      <short value="Additional content defined by implementations" />
      <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." />
      <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." />
      <alias value="extensions" />
      <alias value="user content" />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Element.extension" />
        <min value="0" />
        <max value="*" />
      </base>
      <type>
        <code value="Extension" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <constraint>
        <key value="ext-1" />
        <severity value="error" />
        <human value="Must have either extensions or value[x], not both" />
        <expression value="extension.exists() != value.exists()" />
        <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" />
        <source value="http://hl7.org/fhir/StructureDefinition/Extension" />
      </constraint>
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="N/A" />
      </mapping>
    </element>
    <element id="Composition.section.section.emptyReason.coding.system">
      <path value="Composition.section.section.emptyReason.coding.system" />
      <short value="용어체계 식별(Identity of terminology system)" />
      <definition value="코드(code)에서 기호(symbol)의 의미를 정의하는 CodeSystem[]를 식별" />
      <comment value="The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...).  OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously." />
      <requirements value="Need to be unambiguous about the source of the definition of the symbol." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.system" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="uri" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.3" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./codeSystem" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem" />
      </mapping>
    </element>
    <element id="Composition.section.section.emptyReason.coding.version">
      <path value="Composition.section.section.emptyReason.coding.version" />
      <short value="해당 시스템의 버전 정보 - 필요한 경우" />
      <definition value="해당 코드(code)를 선택한 시점에 사용된 CodeSystem[]의 버전임. 올바로 관리된 CodeSystem[]은 코드(code)의 의미가 버전과 관계없이 일관적이므로 버전을 보고할 필요가 없음. 그러나 CodeSystem[]의 관리 상태는 지속적으로 보장할 수 없는 부분이며, 코드(code)의 의미가 일관적임을 보장할 수 없는 경우 버전이 교체되어야 함." />
      <comment value="Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.version" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.7" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./codeSystemVersion" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion" />
      </mapping>
    </element>
    <element id="Composition.section.section.emptyReason.coding.code">
      <path value="Composition.section.section.emptyReason.coding.code" />
      <short value="시스템에 정의된 구문(syntax)의 기호(symbol)" />
      <definition value="시스템에 정의된 구문(syntax)의 기호(symbol). 기호(symbol)은 CodeSystem[]에 의해 정의된 구문에서 미리 정의된 코드(code) 또는 표현(expression)일 수 있음. (예: post-coordination)" />
      <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" />
      <requirements value="Need to refer to a particular code in the system." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.code" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="code" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.1" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./code" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code" />
      </mapping>
    </element>
    <element id="Composition.section.section.emptyReason.coding.display">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="Composition.section.section.emptyReason.coding.display" />
      <short value="시스템에 정의된 표기(representation)" />
      <definition value="시스템의 규칙(rules)에 따른, 시스템에서 코드(code)의 의미 표기(representation)" />
      <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" />
      <requirements value="Need to be able to carry a human-readable meaning of the code for readers that do not know  the system." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.display" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.2 - but note this is not well followed" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CV.displayName" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName" />
      </mapping>
    </element>
    <element id="Composition.section.section.emptyReason.coding.userSelected">
      <path value="Composition.section.section.emptyReason.coding.userSelected" />
      <short value="해당 코딩(coding)이 사용자(user)에 의해 직접(directly) 선택되었는지 여부" />
      <definition value="해당 코딩(coding)이 사용자(user)에 의해 직접 선택되었음을 나타냄 - (예) 사용가능한 항목(item)의 선택 목록(list) 중 하나 (코드 또는 디스플레이 )" />
      <comment value="Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely." />
      <requirements value="This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="Coding.userSelected" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="boolean" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="Sometimes implied by being first" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="CD.codingRationale" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map;   fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [     fhir:source &quot;true&quot;;     fhir:target dt:CDCoding.codingRationale\#O   ]" />
      </mapping>
    </element>
    <element id="Composition.section.section.emptyReason.text">
      <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable">
        <valueBoolean value="true" />
      </extension>
      <path value="Composition.section.section.emptyReason.text" />
      <short value="개념(concept)에 대한 일반 텍스트 표현 (plain text representation)" />
      <definition value="데이터를 입력한 사용자(user)의 입장에서 보거나(seen)/선택하거나(selected)/언급한대로(uttered)의 개념(concept), 혹은 사용자(user)가 의도한 의미를 사람이 사용하는 언어로 표현한 것임." />
      <comment value="Very often the text is the same as a displayName of one of the codings." />
      <requirements value="The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source." />
      <min value="0" />
      <max value="1" />
      <base>
        <path value="CodeableConcept.text" />
        <min value="0" />
        <max value="1" />
      </base>
      <type>
        <code value="string" />
      </type>
      <condition value="ele-1" />
      <constraint>
        <key value="ele-1" />
        <severity value="error" />
        <human value="All FHIR elements must have a @value or children" />
        <expression value="hasValue() or (children().count() &gt; id.count())" />
        <xpath value="@value|f:*|h:div" />
        <source value="http://hl7.org/fhir/StructureDefinition/Element" />
      </constraint>
      <isSummary value="true" />
      <mapping>
        <identity value="rim" />
        <map value="n/a" />
      </mapping>
      <mapping>
        <identity value="v2" />
        <map value="C*E.9. But note many systems use C*E.2 for this" />
      </mapping>
      <mapping>
        <identity value="rim" />
        <map value="./originalText[mediaType/code=&quot;text/plain&quot;]/data" />
      </mapping>
      <mapping>
        <identity value="orim" />
        <map value="fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText" />
      </mapping>
    </element>
    <element id="Composition.section.section.section">
      <path value="Composition.section.section.section" />
      <short value="중첩된 부문(section)" />
      <definition value="해당 섹션 내에 중첩된 하위-부문(sub-section)" />
      <comment value="Nested sections are primarily used to help human readers navigate to particular portions of the document." />
      <min value="0" />
      <max value="*" />
      <base>
        <path value="Composition.section.section" />
        <min value="0" />
        <max value="*" />
      </base>
      <contentReference value="http://hl7.org/fhir/StructureDefinition/Composition#Composition.section" />
      <condition value="cmp-1" />
      <mapping>
        <identity value="rim" />
        <map value="./outboundRelationship[typeCode=&quot;COMP&quot; and isNormalActRelationship()]/target[moodCode=&quot;EVN&quot; and classCode=&quot;DOCSECT&quot; and isNormalAct]" />
      </mapping>
      <mapping>
        <identity value="cda" />
        <map value=".component.section" />
      </mapping>
    </element>
  </snapshot>
  <differential>
    <element id="Composition">
      <path value="Composition" />
      <short value="임상적 증명과 진술로 구성된 리소스 모음." />
      <definition value="의미에 대한 한개의 일관성 있는 설명을 제공하고, 고유한 컨텍스트를 설정하며, 누가 설명을 한 것인지에 대한 임상 증명(clinical attestation)이 포함되어 하나의 논리적 패키지로 합쳐진 의료 관련 정보의 집합. Composition[]은 문서에 필요한 구조와 서술 내용을 정의함. 그러나, Composition[]만으로는 문서를 구성할 수 없음. 대신, Composition[]은 Bundle.type=document 의 첫번째 항목이어야 하고, Composition[]에서 참조된 다른 리소스들은 Bundle[]의 하위 항목으로 포함되어야 한다.(예: Patient[], Practitioner[], Encounter[] 등)" />
      <comment value="이 명세는 환자에 맞춰진 임상적 진술(statement)에 초점이 맞춰져 있지만, 이 리소스는 연구 프로토콜 디자인, 의료 청구서 및 환자와 무관하고 임상과 관련없는 기타 활동과 같은 또 다른 의료관련 진술에 적용할 수 있음" />
    </element>
    <element id="Composition.id">
      <path value="Composition.id" />
      <short value="이 아티팩스(artifact)의 논리적 ID" />
      <definition value="임상적 증명과 진술로 구성된 리소스 모음." />
    </element>
    <element id="Composition.meta">
      <path value="Composition.meta" />
      <short value="리소스(resource)에 대한 메타 데이터" />
      <definition value="리소스(resource)에 대한 메타 데이터임. 이것은 인프라에 의해 유지관리되는 컨텐츠(content)임. 컨텐츠(content) 변경 사항이 항상 리소스(resource)의 버전 변경 사항과 연관되어 있지는 않을 수 있음." />
    </element>
    <element id="Composition.meta.id">
      <path value="Composition.meta.id" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
    </element>
    <element id="Composition.meta.versionId">
      <path value="Composition.meta.versionId" />
      <short value="버전별 식별자(identifier)" />
      <definition value="URL의 버전 부분에 나타나는 버전별 식별자(identifier)임. 이 값은 리소스(resource)가 생성,업데이트, 또는 삭제될 떄 변경됨." />
    </element>
    <element id="Composition.meta.lastUpdated">
      <path value="Composition.meta.lastUpdated" />
      <short value="리소스(resource) 버전이 마지막으로 변경된 시점" />
      <definition value="리소스(resource)가 마지막으로 변경된 경우 - 예를 들어 버전이 변경된 경우" />
    </element>
    <element id="Composition.meta.source">
      <path value="Composition.meta.source" />
      <short value="리소스(resource)의 출처 식별" />
      <definition value="리소스(resource)의 소스 시스템을 식별하는 uri. 이를 통해 리소스 정보의 출처를 추적하거나, 차별화 하는데 사용 할수 있는 최소한의 [Provenance](provenance.html#) 정보를 얻을 수 있음. 소스가 다른 FHIR 서버, 문서, 메시지 데이터베이스 등을 식별할수 있음." />
    </element>
    <element id="Composition.meta.profile">
      <path value="Composition.meta.profile" />
      <short value="이 리소스(resource)가 준수하는 프로파일" />
      <definition value="이 리소스(resource)가 준수하는 프로파일 목록 ([StructureDefinition] (structuredefinition.html #) 리소스에 대한 참조)임. URL은 [StructureDefinition.url] (structuredefinition-definitions.html # StructureDefinition.url)에 대한 참조임." />
    </element>
    <element id="Composition.meta.security">
      <path value="Composition.meta.security" />
      <short value="이 리소스(resource)에 적용된 보안 레이블" />
      <definition value="이 리소스(resource)에 적용된 보안 레이블임. 이러한 태그는 특정 리소스를 전체 보안 정책 및 인프라에 연결함" />
    </element>
    <element id="Composition.meta.security.id">
      <path value="Composition.meta.security.id" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
    </element>
    <element id="Composition.meta.security.system">
      <path value="Composition.meta.security.system" />
      <short value="용어체계 식별(Identity of terminology system)" />
      <definition value="코드(code)에서 기호(symbol)의 의미를 정의하는 CodeSystem[]를 식별" />
    </element>
    <element id="Composition.meta.security.version">
      <path value="Composition.meta.security.version" />
      <short value="해당 시스템의 버전 정보 - 필요한 경우" />
      <definition value="해당 코드(code)를 선택한 시점에 사용된 CodeSystem[]의 버전임. 올바로 관리된 CodeSystem[]은 코드(code)의 의미가 버전과 관계없이 일관적이므로 버전을 보고할 필요가 없음. 그러나 CodeSystem[]의 관리 상태는 지속적으로 보장할 수 없는 부분이며, 코드(code)의 의미가 일관적임을 보장할 수 없는 경우 버전이 교체되어야 함." />
    </element>
    <element id="Composition.meta.security.code">
      <path value="Composition.meta.security.code" />
      <short value="시스템에 정의된 구문(syntax)의 기호(symbol)" />
      <definition value="시스템에 정의된 구문(syntax)의 기호(symbol). 기호(symbol)은 CodeSystem[]에 의해 정의된 구문에서 미리 정의된 코드(code) 또는 표현(expression)일 수 있음. (예: post-coordination)" />
    </element>
    <element id="Composition.meta.security.display">
      <path value="Composition.meta.security.display" />
      <short value="시스템에 정의된 표기(representation)" />
      <definition value="시스템의 규칙(rules)에 따른, 시스템에서 코드(code)의 의미 표기(representation)" />
    </element>
    <element id="Composition.meta.security.userSelected">
      <path value="Composition.meta.security.userSelected" />
      <short value="해당 코딩(coding)이 사용자(user)에 의해 직접(directly) 선택되었는지 여부" />
      <definition value="해당 코딩(coding)이 사용자(user)에 의해 직접 선택되었음을 나타냄 - (예) 사용가능한 항목(item)의 선택 목록(list) 중 하나 (코드 또는 디스플레이 )" />
    </element>
    <element id="Composition.meta.tag">
      <path value="Composition.meta.tag" />
      <short value="이 리소스(resource)에 적용된 태그." />
      <definition value="이 리소스(resource)에 적용된 태그.  태그는 리소스를 식별하고 프로세스 및 워크플로에 연결하는 데 사용되며, 애플리케이션은 리소스의 의미를 해석할 때 태그를 고려할 필요 없음." />
    </element>
    <element id="Composition.meta.tag.id">
      <path value="Composition.meta.tag.id" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
    </element>
    <element id="Composition.meta.tag.system">
      <path value="Composition.meta.tag.system" />
      <short value="용어체계 식별(Identity of terminology system)" />
      <definition value="코드(code)에서 기호(symbol)의 의미를 정의하는 CodeSystem[]를 식별" />
    </element>
    <element id="Composition.meta.tag.version">
      <path value="Composition.meta.tag.version" />
      <short value="해당 시스템의 버전 정보 - 필요한 경우" />
      <definition value="해당 코드(code)를 선택한 시점에 사용된 CodeSystem[]의 버전임. 올바로 관리된 CodeSystem[]은 코드(code)의 의미가 버전과 관계없이 일관적이므로 버전을 보고할 필요가 없음. 그러나 CodeSystem[]의 관리 상태는 지속적으로 보장할 수 없는 부분이며, 코드(code)의 의미가 일관적임을 보장할 수 없는 경우 버전이 교체되어야 함." />
    </element>
    <element id="Composition.meta.tag.code">
      <path value="Composition.meta.tag.code" />
      <short value="시스템에 정의된 구문(syntax)의 기호(symbol)" />
      <definition value="시스템에 정의된 구문(syntax)의 기호(symbol). 기호(symbol)은 CodeSystem[]에 의해 정의된 구문에서 미리 정의된 코드(code) 또는 표현(expression)일 수 있음. (예: post-coordination)" />
    </element>
    <element id="Composition.meta.tag.display">
      <path value="Composition.meta.tag.display" />
      <short value="시스템에 정의된 표기(representation)" />
      <definition value="시스템의 규칙(rules)에 따른, 시스템에서 코드(code)의 의미 표기(representation)" />
    </element>
    <element id="Composition.meta.tag.userSelected">
      <path value="Composition.meta.tag.userSelected" />
      <short value="해당 코딩(coding)이 사용자(user)에 의해 직접(directly) 선택되었는지 여부" />
      <definition value="해당 코딩(coding)이 사용자(user)에 의해 직접 선택되었음을 나타냄 - (예) 사용가능한 항목(item)의 선택 목록(list) 중 하나 (코드 또는 디스플레이 )" />
    </element>
    <element id="Composition.implicitRules">
      <path value="Composition.implicitRules" />
      <short value="이 컨텐츠(content)가 생성된 일련의 규칙" />
      <definition value="리소스(resource)를 구성될 때, 준수되고 컨텐츠(content)를 처리할 때 이해해야 하는 규칙 집합(set of rules)에 대한 참조. 많은 경우, 이것은 다른 Profile[프로파일] 등과 함께 특수 규칙을 정의하는 구현 가이드에 대한 참조임." />
    </element>
    <element id="Composition.language">
      <path value="Composition.language" />
      <short value="리소스(resource) 컨텐츠(content) 언어" />
      <definition value="리소스(resource)가 기록된 기본 언어" />
    </element>
    <element id="Composition.text">
      <path value="Composition.text" />
      <short value="사람의 해석을 위한 리소스(resource)의 텍스트 요약" />
      <definition value="리소스(resource) 요약을 포함하고 사람에게 리소스(resource) 내용을 나타내는 데 사용될 수 있는 사람이 읽을 수 있는 서술임. 서술은 모든 구조화된 데이터를 인코딩할 필요는 없지만, 사람이 서술을 읽기만한다면 &quot;clinically safe&quot; 데이터를 만들기 위해 충분한 세부정보를 포함해야 함. 리소스 정의는 임상적 안정성을 보장하기 위해 서술에 어떤 내용을 나타내야 하는지를 정의할  수 있음." />
    </element>
    <element id="Composition.text.id">
      <path value="Composition.text.id" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
    </element>
    <element id="Composition.text.status">
      <path value="Composition.text.status" />
      <short value="generated | extensions | additional | empty" />
      <definition value="설명의 상태. 자동으로 생성 되었는지, 사람에 의해 수동적으로 생성되었는지, 데이터 추가가 가능한지 여부를 나타냄." />
    </element>
    <element id="Composition.text.div">
      <path value="Composition.text.div" />
      <short value="제한된 XHTML 컨텐츠(content)" />
      <definition value="설명의 실제 컨텐츠(content). 가장 기본적인 XHTML 버전임." />
    </element>
    <element id="Composition.contained">
      <path value="Composition.contained" />
      <short value="포함된(contained), 인라인(inline) 리소스(resource)" />
      <definition value="이러한 리소스(resource)은 리소스를 포함하는 리소스와 별도로 독립적인 존재가 아님- 독립적으로 식별할 수 없으며, 자체 독립 트랜잭션(transaction) 범위를 가질 수도 없음." />
    </element>
    <element id="Composition.identifier">
      <path value="Composition.identifier" />
      <short value="Composition[]에 대한 버전 독립적인 식별자" />
      <definition value="Composition[]에 대한 버전 독립적인 식별자. 이 식별자는 구성이 시간에 따라 변경되어도 일정하게 유지됨" />
      <comment value="CDA의 ClinicalDocument/setId와 유사함. 연관성에 대해서는 리소스 정의관련 설명을 참조." />
    </element>
    <element id="Composition.identifier.id">
      <path value="Composition.identifier.id" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
    </element>
    <element id="Composition.identifier.use">
      <path value="Composition.identifier.use" />
      <short value="usual | official | temp | secondary | old (If known)" />
      <definition value="해당 식별자(identifier)의 목적" />
    </element>
    <element id="Composition.identifier.type">
      <path value="Composition.identifier.type" />
      <short value="식별자(identifier)에 대한 설명" />
      <definition value="특정 목적으로 사용되는 식별자(identifier)를 결정하기 위해 사용하는 식별자(identifier)의 코드화된(coded) 유형(type)을 나타냄." />
    </element>
    <element id="Composition.identifier.type.id">
      <path value="Composition.identifier.type.id" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
    </element>
    <element id="Composition.identifier.type.coding">
      <path value="Composition.identifier.type.coding" />
      <short value="용어체계(terminology system)에 의해 정의된 코드(code)" />
      <definition value="용어체계(terminology system)에 의해 정의된 코드(code) 참조" />
    </element>
    <element id="Composition.identifier.type.coding.id">
      <path value="Composition.identifier.type.coding.id" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
    </element>
    <element id="Composition.identifier.type.coding.system">
      <path value="Composition.identifier.type.coding.system" />
      <short value="용어체계 식별(Identity of terminology system)" />
      <definition value="코드(code)에서 기호(symbol)의 의미를 정의하는 CodeSystem[]를 식별" />
    </element>
    <element id="Composition.identifier.type.coding.version">
      <path value="Composition.identifier.type.coding.version" />
      <short value="해당 시스템의 버전 정보 - 필요한 경우" />
      <definition value="해당 코드(code)를 선택한 시점에 사용된 CodeSystem[]의 버전임. 올바로 관리된 CodeSystem[]은 코드(code)의 의미가 버전과 관계없이 일관적이므로 버전을 보고할 필요가 없음. 그러나 CodeSystem[]의 관리 상태는 지속적으로 보장할 수 없는 부분이며, 코드(code)의 의미가 일관적임을 보장할 수 없는 경우 버전이 교체되어야 함." />
    </element>
    <element id="Composition.identifier.type.coding.code">
      <path value="Composition.identifier.type.coding.code" />
      <short value="시스템에 정의된 구문(syntax)의 기호(symbol)" />
      <definition value="시스템에 정의된 구문(syntax)의 기호(symbol). 기호(symbol)은 CodeSystem[]에 의해 정의된 구문에서 미리 정의된 코드(code) 또는 표현(expression)일 수 있음. (예: post-coordination)" />
    </element>
    <element id="Composition.identifier.type.coding.display">
      <path value="Composition.identifier.type.coding.display" />
      <short value="시스템에 정의된 표기(representation)" />
      <definition value="시스템의 규칙(rules)에 따른, 시스템에서 코드(code)의 의미 표기(representation)" />
    </element>
    <element id="Composition.identifier.type.coding.userSelected">
      <path value="Composition.identifier.type.coding.userSelected" />
      <short value="해당 코딩(coding)이 사용자(user)에 의해 직접(directly) 선택되었는지 여부" />
      <definition value="해당 코딩(coding)이 사용자(user)에 의해 직접 선택되었음을 나타냄 - (예) 사용가능한 항목(item)의 선택 목록(list) 중 하나 (코드 또는 디스플레이 )" />
    </element>
    <element id="Composition.identifier.type.text">
      <path value="Composition.identifier.type.text" />
      <short value="개념(concept)에 대한 일반 텍스트 표현 (plain text representation)" />
      <definition value="데이터를 입력한 사용자(user)의 입장에서 보거나(seen)/선택하거나(selected)/언급한대로(uttered)의 개념(concept), 혹은 사용자(user)가 의도한 의미를 사람이 사용하는 언어로 표현한 것임." />
    </element>
    <element id="Composition.identifier.system">
      <path value="Composition.identifier.system" />
      <short value="식별자(identifier) 값의 네임스페이스(namespace)" />
      <definition value="설정 값에 대한 네임스페이스 (namespace), 즉 고유(unique)한 설정값을 설명하는 URL을 설정함." />
    </element>
    <element id="Composition.identifier.value">
      <path value="Composition.identifier.value" />
      <short value="고유(unique)한 값(value)" />
      <definition value="일반적으로 사용자(user)와 관련(relevant)이 있으며, 시스템 컨텍스트(context) 내에서 고유(unique)한 식별자(identifier)의 일부분임." />
    </element>
    <element id="Composition.identifier.period">
      <path value="Composition.identifier.period" />
      <short value="식별자(identifier)의 유효 기간" />
      <definition value="식별자(identifier)가 사용 가능했거나 가능한 기간을 나타냄." />
    </element>
    <element id="Composition.identifier.period.id">
      <path value="Composition.identifier.period.id" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
    </element>
    <element id="Composition.identifier.period.start">
      <path value="Composition.identifier.period.start" />
      <short value="해당 유효 기간의 시작 시점 (설정된 날짜 포함)" />
      <definition value="해당 유효 기간이 시작되는 시점을 나타냄. 유효 기간은 시작 시점으로 설정된 날짜를 포함함." />
    </element>
    <element id="Composition.identifier.period.end">
      <path value="Composition.identifier.period.end" />
      <short value="해당 유효 기간의 종료 시점 (설정된 날짜 포함)" />
      <definition value="기간의 종료. 기간의 종료가 누락된 경우, 인스턴스가 생성될 때 끝이 알려지거나 계획되지 않았음을 의미함. 시작일은 과거일 수 있고 종료일은 미래일 수 있음. 이는 해당 기간이 해당 시간에 종료될 예정임을 의미함" />
    </element>
    <element id="Composition.identifier.assigner">
      <path value="Composition.identifier.assigner" />
      <short value="식별자(identifier)를 발급한 조직(단순 텍스트 기입 가능)" />
      <definition value="식별자(identifier)를 발급/관리하는 조직(organization)" />
    </element>
    <element id="Composition.identifier.assigner.id">
      <path value="Composition.identifier.assigner.id" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
    </element>
    <element id="Composition.identifier.assigner.reference">
      <path value="Composition.identifier.assigner.reference" />
      <short value="문자로 표현된(literal) 참조, 상대적, 내부적 혹은 절대적인 URL" />
      <definition value="다른 리소스(resource)를 찾을 수 있는 위치에 대한 참조를 의미함. 해당 참조는 service base URL에 상대적인(relative) 경우 상대적 참조, 혹은 해당 리소스(resource)를 찾을 수 있는 위치인 절대(absolute) URL일 수 있음. 해당 참조는 버전에 따라 다를 수 있음. 해당 참조가 FHIR RESTful 서버가 아닌 경우, 버전에 따라 다른 것으로 간주함. 내부 구문(Internal Fragment) 참조('#'으로 시작)는 포함되어 있는 리소스(resource)를 참조함." />
    </element>
    <element id="Composition.identifier.assigner.type">
      <path value="Composition.identifier.assigner.type" />
      <short value="참조(reference)가 참조(refer)하는 유형(type)  (예. &quot;Patient&quot;)" />
      <definition value="참조 대상의 예상 형식(expected type).  Reference.type과 Reference.reference가 모두 채워지고 Reference.reference가 FHIR URL이면 두가지 모두 일치해야함. 유형(type)은이 참조가 참조하는 유형(type) 인 리소스(resource) 정의의 표준(Canonical) URL임. 참조는 http://hl7.org/fhir/StructureDefinition/과 관련된 URL임. (예) &quot; 환자 &quot; http://hl7.org/fhir/StructureDefinition/Patient에 대한 참조. 절대(absolute) URL은 논리 모델에만 허용됨 (리소스(resource)가 아닌 논리 모델의 참조에서만 사용할 수 있음)." />
    </element>
    <element id="Composition.identifier.assigner.identifier">
      <path value="Composition.identifier.assigner.identifier" />
      <short value="문자로 표현된(literal) 참조를 알 수 없는 경우 사용하는, 논리적(logical) 참조" />
      <definition value="대상 리소스(resource)의 식별자(identifier). 이것은 다른 리소스(resource)를 직접 참조할 방법이 없을 때 사용- 해당 엔티티(entity)가 FHIR 서버를 통해 사용할 수 없거나  리소스(resource) 작성자가 알려진 식별자(identifier)를 실제 위치로 변활할 방법이 없기 때문에 이 방법이 사용됨. Reference.identifier가 실제로 FHIR 인스턴스로 노출되는 것을 가리킬(point) 필요는 없지만, FHIR 인스턴스로 노출될 것으로 예상되는 비즈니스 개념(concept)을 가리켜야하며, 해당 인스턴스는 참조가 허용되는 FHIR 리소스 타입(resource type)이여야 함." />
    </element>
    <element id="Composition.identifier.assigner.display">
      <path value="Composition.identifier.assigner.display" />
      <short value="해당 리소스(resource)에 대한 대체 텍스트(alternative text)" />
      <definition value="리소스(resource) 참조 외에도 리소스(resource)를 식별하기 위한 일반 텍스트 설명임." />
    </element>
    <element id="Composition.status">
      <path value="Composition.status" />
      <short value="preliminary | final | amended | entered-in-error" />
      <definition value="이 Composition[]의 workflow/clinical 상태. 즉 문서의 임상적 위치를 대한 표시를 말함" />
      <comment value="만약 Composition[]에 철회 표기가 되어있으면, 시리즈(series) 내의 compositions/documents 또는 그로부터 나온 데이터가 신뢰할 수 없는 정보라고 명확히 표시되지 않은 채 사용자에게 제공되어서는 안됨. 표기(flag) &quot;entered-in-error&quot; 요소(element)가 다른 요소(element)에 대한 한정자로 분류되는 이유임. 일부 리포팅 워크플로우에서는 최종 문서의 본래의 서술이 변경되지 않고 새로운 서술만 추가할 수 있도록 요구할 수 있음. Composition[]리소스는 비즈니스 규칙이 적용되는지 여부를 명시적으로 확인할 수 있는 상태(status)는 없음. 필요시 이런 작업은 익스텐션(extension)으로 처리" />
    </element>
    <element id="Composition.type">
      <path value="Composition.type" />
      <short value="구성요소(composition) 의 종류 (LOINC이 가능한 경우)" />
      <definition value="특정한 종류의 구성요소(composition)을 지정하는 것으로, 일반적으로 구성요소을 만드는 목적과 동일시 됨.(예 : History, Physical, Discharge, Summary, Progress Note)" />
      <comment value="Compoosition[] 타입에서, LOINC는 널리 사용되며 HL7가 지지하는 용어체계로 대부분의 구현 가이드는 특정한 LOINC코드 또는 LOINC 익스텐션을 사용" />
    </element>
    <element id="Composition.type.id">
      <path value="Composition.type.id" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
    </element>
    <element id="Composition.type.coding">
      <path value="Composition.type.coding" />
      <short value="용어체계(terminology system)에 의해 정의된 코드(code)" />
      <definition value="용어체계(terminology system)에 의해 정의된 코드(code) 참조" />
    </element>
    <element id="Composition.type.coding.id">
      <path value="Composition.type.coding.id" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
    </element>
    <element id="Composition.type.coding.system">
      <path value="Composition.type.coding.system" />
      <short value="용어체계 식별(Identity of terminology system)" />
      <definition value="코드(code)에서 기호(symbol)의 의미를 정의하는 CodeSystem[]를 식별" />
    </element>
    <element id="Composition.type.coding.version">
      <path value="Composition.type.coding.version" />
      <short value="해당 시스템의 버전 정보 - 필요한 경우" />
      <definition value="해당 코드(code)를 선택한 시점에 사용된 CodeSystem[]의 버전임. 올바로 관리된 CodeSystem[]은 코드(code)의 의미가 버전과 관계없이 일관적이므로 버전을 보고할 필요가 없음. 그러나 CodeSystem[]의 관리 상태는 지속적으로 보장할 수 없는 부분이며, 코드(code)의 의미가 일관적임을 보장할 수 없는 경우 버전이 교체되어야 함." />
    </element>
    <element id="Composition.type.coding.code">
      <path value="Composition.type.coding.code" />
      <short value="시스템에 정의된 구문(syntax)의 기호(symbol)" />
      <definition value="시스템에 정의된 구문(syntax)의 기호(symbol). 기호(symbol)은 CodeSystem[]에 의해 정의된 구문에서 미리 정의된 코드(code) 또는 표현(expression)일 수 있음. (예: post-coordination)" />
    </element>
    <element id="Composition.type.coding.display">
      <path value="Composition.type.coding.display" />
      <short value="시스템에 정의된 표기(representation)" />
      <definition value="시스템의 규칙(rules)에 따른, 시스템에서 코드(code)의 의미 표기(representation)" />
    </element>
    <element id="Composition.type.coding.userSelected">
      <path value="Composition.type.coding.userSelected" />
      <short value="해당 코딩(coding)이 사용자(user)에 의해 직접(directly) 선택되었는지 여부" />
      <definition value="해당 코딩(coding)이 사용자(user)에 의해 직접 선택되었음을 나타냄 - (예) 사용가능한 항목(item)의 선택 목록(list) 중 하나 (코드 또는 디스플레이 )" />
    </element>
    <element id="Composition.type.text">
      <path value="Composition.type.text" />
      <short value="개념(concept)에 대한 일반 텍스트 표현 (plain text representation)" />
      <definition value="데이터를 입력한 사용자(user)의 입장에서 보거나(seen)/선택하거나(selected)/언급한대로(uttered)의 개념(concept), 혹은 사용자(user)가 의도한 의미를 사람이 사용하는 언어로 표현한 것임." />
    </element>
    <element id="Composition.category">
      <path value="Composition.category" />
      <short value="구성요소(composition)의 분류" />
      <definition value="구성요소(composition)의 유형 분류는 인덱싱 및 검색에 활용 될 수 있음. 이는 해당 구성요소(composition) 유형에 지정된 코드에 의해 암시되거나 파생될 수 있음." />
      <comment value="[XDSMHD](http:wiki.ihe.netindex.php?title=Mobile_access_to_Health_Documents_(MHD))의 메타데이터 필드" />
    </element>
    <element id="Composition.category.id">
      <path value="Composition.category.id" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
    </element>
    <element id="Composition.category.coding">
      <path value="Composition.category.coding" />
      <short value="용어체계(terminology system)에 의해 정의된 코드(code)" />
      <definition value="용어체계(terminology system)에 의해 정의된 코드(code) 참조" />
    </element>
    <element id="Composition.category.coding.id">
      <path value="Composition.category.coding.id" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
    </element>
    <element id="Composition.category.coding.system">
      <path value="Composition.category.coding.system" />
      <short value="용어체계 식별(Identity of terminology system)" />
      <definition value="코드(code)에서 기호(symbol)의 의미를 정의하는 CodeSystem[]를 식별" />
    </element>
    <element id="Composition.category.coding.version">
      <path value="Composition.category.coding.version" />
      <short value="해당 시스템의 버전 정보 - 필요한 경우" />
      <definition value="해당 코드(code)를 선택한 시점에 사용된 CodeSystem[]의 버전임. 올바로 관리된 CodeSystem[]은 코드(code)의 의미가 버전과 관계없이 일관적이므로 버전을 보고할 필요가 없음. 그러나 CodeSystem[]의 관리 상태는 지속적으로 보장할 수 없는 부분이며, 코드(code)의 의미가 일관적임을 보장할 수 없는 경우 버전이 교체되어야 함." />
    </element>
    <element id="Composition.category.coding.code">
      <path value="Composition.category.coding.code" />
      <short value="시스템에 정의된 구문(syntax)의 기호(symbol)" />
      <definition value="시스템에 정의된 구문(syntax)의 기호(symbol). 기호(symbol)은 CodeSystem[]에 의해 정의된 구문에서 미리 정의된 코드(code) 또는 표현(expression)일 수 있음. (예: post-coordination)" />
    </element>
    <element id="Composition.category.coding.display">
      <path value="Composition.category.coding.display" />
      <short value="시스템에 정의된 표기(representation)" />
      <definition value="시스템의 규칙(rules)에 따른, 시스템에서 코드(code)의 의미 표기(representation)" />
    </element>
    <element id="Composition.category.coding.userSelected">
      <path value="Composition.category.coding.userSelected" />
      <short value="해당 코딩(coding)이 사용자(user)에 의해 직접(directly) 선택되었는지 여부" />
      <definition value="해당 코딩(coding)이 사용자(user)에 의해 직접 선택되었음을 나타냄 - (예) 사용가능한 항목(item)의 선택 목록(list) 중 하나 (코드 또는 디스플레이 )" />
    </element>
    <element id="Composition.category.text">
      <path value="Composition.category.text" />
      <short value="개념(concept)에 대한 일반 텍스트 표현 (plain text representation)" />
      <definition value="데이터를 입력한 사용자(user)의 입장에서 보거나(seen)/선택하거나(selected)/언급한대로(uttered)의 개념(concept), 혹은 사용자(user)가 의도한 의미를 사람이 사용하는 언어로 표현한 것임." />
    </element>
    <element id="Composition.subject">
      <path value="Composition.subject" />
      <short value="누가 그리고 무엇에 대한 구성(composition)인지" />
      <definition value="구성요소(composition)의 주체 누구 혹은 무엇인지를 나타냄. 사람의 경우 (환자 / 건강관리 전문가), 기기(device)의 경우 (예: 기계), 피험자 그룹의 경우 (가축 떼 혹은 공통사항이 있는 환자그룹) 등이 가능함." />
      <comment value="임상문서에서 일반적으로 이 값은 환자를 말함" />
    </element>
    <element id="Composition.subject.id">
      <path value="Composition.subject.id" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
    </element>
    <element id="Composition.subject.reference">
      <path value="Composition.subject.reference" />
      <short value="문자로 표현된(literal) 참조, 상대적, 내부적 혹은 절대적인 URL" />
      <definition value="다른 리소스(resource)를 찾을 수 있는 위치에 대한 참조를 의미함. 해당 참조는 service base URL에 상대적인(relative) 경우 상대적 참조, 혹은 해당 리소스(resource)를 찾을 수 있는 위치인 절대(absolute) URL일 수 있음. 해당 참조는 버전에 따라 다를 수 있음. 해당 참조가 FHIR RESTful 서버가 아닌 경우, 버전에 따라 다른 것으로 간주함. 내부 구문(Internal Fragment) 참조('#'으로 시작)는 포함되어 있는 리소스(resource)를 참조함." />
    </element>
    <element id="Composition.subject.type">
      <path value="Composition.subject.type" />
      <short value="참조(reference)가 참조(refer)하는 유형(type)  (예. &quot;Patient&quot;)" />
      <definition value="참조 대상의 예상 형식(expected type).  Reference.type과 Reference.reference가 모두 채워지고 Reference.reference가 FHIR URL이면 두가지 모두 일치해야함. 유형(type)은이 참조가 참조하는 유형(type) 인 리소스(resource) 정의의 표준(Canonical) URL임. 참조는 http://hl7.org/fhir/StructureDefinition/과 관련된 URL임. (예) &quot; 환자 &quot; http://hl7.org/fhir/StructureDefinition/Patient에 대한 참조. 절대(absolute) URL은 논리 모델에만 허용됨 (리소스(resource)가 아닌 논리 모델의 참조에서만 사용할 수 있음)." />
    </element>
    <element id="Composition.subject.identifier">
      <path value="Composition.subject.identifier" />
      <short value="문자로 표현된(literal) 참조를 알 수 없는 경우 사용하는, 논리적(logical) 참조" />
      <definition value="대상 리소스(resource)의 식별자(identifier). 이것은 다른 리소스(resource)를 직접 참조할 방법이 없을 때 사용- 해당 엔티티(entity)가 FHIR 서버를 통해 사용할 수 없거나  리소스(resource) 작성자가 알려진 식별자(identifier)를 실제 위치로 변활할 방법이 없기 때문에 이 방법이 사용됨. Reference.identifier가 실제로 FHIR 인스턴스로 노출되는 것을 가리킬(point) 필요는 없지만, FHIR 인스턴스로 노출될 것으로 예상되는 비즈니스 개념(concept)을 가리켜야하며, 해당 인스턴스는 참조가 허용되는 FHIR 리소스 타입(resource type)이여야 함." />
    </element>
    <element id="Composition.subject.identifier.id">
      <path value="Composition.subject.identifier.id" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
    </element>
    <element id="Composition.subject.identifier.use">
      <path value="Composition.subject.identifier.use" />
      <short value="usual | official | temp | secondary | old (If known)" />
      <definition value="해당 식별자(identifier)의 목적" />
    </element>
    <element id="Composition.subject.identifier.type">
      <path value="Composition.subject.identifier.type" />
      <short value="식별자(identifier)에 대한 설명" />
      <definition value="특정 목적으로 사용되는 식별자(identifier)를 결정하기 위해 사용하는 식별자(identifier)의 코드화된(coded) 유형(type)을 나타냄." />
    </element>
    <element id="Composition.subject.identifier.type.id">
      <path value="Composition.subject.identifier.type.id" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
    </element>
    <element id="Composition.subject.identifier.type.coding">
      <path value="Composition.subject.identifier.type.coding" />
      <short value="용어체계(terminology system)에 의해 정의된 코드(code)" />
      <definition value="용어체계(terminology system)에 의해 정의된 코드(code) 참조" />
    </element>
    <element id="Composition.subject.identifier.type.coding.id">
      <path value="Composition.subject.identifier.type.coding.id" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
    </element>
    <element id="Composition.subject.identifier.type.coding.system">
      <path value="Composition.subject.identifier.type.coding.system" />
      <short value="용어체계 식별(Identity of terminology system)" />
      <definition value="코드(code)에서 기호(symbol)의 의미를 정의하는 CodeSystem[]를 식별" />
    </element>
    <element id="Composition.subject.identifier.type.coding.version">
      <path value="Composition.subject.identifier.type.coding.version" />
      <short value="해당 시스템의 버전 정보 - 필요한 경우" />
      <definition value="해당 코드(code)를 선택한 시점에 사용된 CodeSystem[]의 버전임. 올바로 관리된 CodeSystem[]은 코드(code)의 의미가 버전과 관계없이 일관적이므로 버전을 보고할 필요가 없음. 그러나 CodeSystem[]의 관리 상태는 지속적으로 보장할 수 없는 부분이며, 코드(code)의 의미가 일관적임을 보장할 수 없는 경우 버전이 교체되어야 함." />
    </element>
    <element id="Composition.subject.identifier.type.coding.code">
      <path value="Composition.subject.identifier.type.coding.code" />
      <short value="시스템에 정의된 구문(syntax)의 기호(symbol)" />
      <definition value="시스템에 정의된 구문(syntax)의 기호(symbol). 기호(symbol)은 CodeSystem[]에 의해 정의된 구문에서 미리 정의된 코드(code) 또는 표현(expression)일 수 있음. (예: post-coordination)" />
    </element>
    <element id="Composition.subject.identifier.type.coding.display">
      <path value="Composition.subject.identifier.type.coding.display" />
      <short value="시스템에 정의된 표기(representation)" />
      <definition value="시스템의 규칙(rules)에 따른, 시스템에서 코드(code)의 의미 표기(representation)" />
    </element>
    <element id="Composition.subject.identifier.type.coding.userSelected">
      <path value="Composition.subject.identifier.type.coding.userSelected" />
      <short value="해당 코딩(coding)이 사용자(user)에 의해 직접(directly) 선택되었는지 여부" />
      <definition value="해당 코딩(coding)이 사용자(user)에 의해 직접 선택되었음을 나타냄 - (예) 사용가능한 항목(item)의 선택 목록(list) 중 하나 (코드 또는 디스플레이 )" />
    </element>
    <element id="Composition.subject.identifier.type.text">
      <path value="Composition.subject.identifier.type.text" />
      <short value="개념(concept)에 대한 일반 텍스트 표현 (plain text representation)" />
      <definition value="데이터를 입력한 사용자(user)의 입장에서 보거나(seen)/선택하거나(selected)/언급한대로(uttered)의 개념(concept), 혹은 사용자(user)가 의도한 의미를 사람이 사용하는 언어로 표현한 것임." />
    </element>
    <element id="Composition.subject.identifier.system">
      <path value="Composition.subject.identifier.system" />
      <short value="식별자(identifier) 값의 네임스페이스(namespace)" />
      <definition value="설정 값에 대한 네임스페이스 (namespace), 즉 고유(unique)한 설정값을 설명하는 URL을 설정함." />
    </element>
    <element id="Composition.subject.identifier.value">
      <path value="Composition.subject.identifier.value" />
      <short value="고유(unique)한 값(value)" />
      <definition value="일반적으로 사용자(user)와 관련(relevant)이 있으며, 시스템 컨텍스트(context) 내에서 고유(unique)한 식별자(identifier)의 일부분임." />
    </element>
    <element id="Composition.subject.identifier.period">
      <path value="Composition.subject.identifier.period" />
      <short value="식별자(identifier)의 유효 기간" />
      <definition value="식별자(identifier)가 사용 가능했거나 가능한 기간을 나타냄." />
    </element>
    <element id="Composition.subject.identifier.period.id">
      <path value="Composition.subject.identifier.period.id" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
    </element>
    <element id="Composition.subject.identifier.period.start">
      <path value="Composition.subject.identifier.period.start" />
      <short value="해당 유효 기간의 시작 시점 (설정된 날짜 포함)" />
      <definition value="해당 유효 기간이 시작되는 시점을 나타냄. 유효 기간은 시작 시점으로 설정된 날짜를 포함함." />
    </element>
    <element id="Composition.subject.identifier.period.end">
      <path value="Composition.subject.identifier.period.end" />
      <short value="해당 유효 기간의 종료 시점 (설정된 날짜 포함)" />
      <definition value="기간의 종료. 기간의 종료가 누락된 경우, 인스턴스가 생성될 때 끝이 알려지거나 계획되지 않았음을 의미함. 시작일은 과거일 수 있고 종료일은 미래일 수 있음. 이는 해당 기간이 해당 시간에 종료될 예정임을 의미함" />
    </element>
    <element id="Composition.subject.identifier.assigner">
      <path value="Composition.subject.identifier.assigner" />
      <short value="식별자(identifier)를 발급한 조직(단순 텍스트 기입 가능)" />
      <definition value="식별자(identifier)를 발급/관리하는 조직(organization)" />
    </element>
    <element id="Composition.subject.display">
      <path value="Composition.subject.display" />
      <short value="해당 리소스(resource)에 대한 대체 텍스트(alternative text)" />
      <definition value="리소스(resource) 참조 외에도 리소스(resource)를 식별하기 위한 일반 텍스트 설명임." />
    </element>
    <element id="Composition.encounter">
      <path value="Composition.encounter" />
      <short value="구성요소(composition)의 맥락이되는 이벤트" />
      <definition value="해당 문서와 관련된 임상적 이벤트 혹은 치료 유형에 대한 설명" />
      <comment value="참조(reference)는 실제 FHIR 리소스(resource)에 대한 참조(reference)여야 하며, 해결이 가능해야 함 (접근 제어 허용, 일시적인 사용 불가능 등). 해결 방법은 URL에서 검색하거나, 리소스 타입(resource type)별로 적용할 수 있는 경우 절대 참조를 표준(Canonical) URL로 간주하고 로컬 레지스트리/저장소에서 검색하여 확인할 수 있음." />
    </element>
    <element id="Composition.encounter.id">
      <path value="Composition.encounter.id" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
    </element>
    <element id="Composition.encounter.reference">
      <path value="Composition.encounter.reference" />
      <short value="문자로 표현된(literal) 참조, 상대적, 내부적 혹은 절대적인 URL" />
      <definition value="다른 리소스(resource)를 찾을 수 있는 위치에 대한 참조를 의미함. 해당 참조는 service base URL에 상대적인(relative) 경우 상대적 참조, 혹은 해당 리소스(resource)를 찾을 수 있는 위치인 절대(absolute) URL일 수 있음. 해당 참조는 버전에 따라 다를 수 있음. 해당 참조가 FHIR RESTful 서버가 아닌 경우, 버전에 따라 다른 것으로 간주함. 내부 구문(Internal Fragment) 참조('#'으로 시작)는 포함되어 있는 리소스(resource)를 참조함." />
    </element>
    <element id="Composition.encounter.type">
      <path value="Composition.encounter.type" />
      <short value="참조(reference)가 참조(refer)하는 유형(type)  (예. &quot;Patient&quot;)" />
      <definition value="참조 대상의 예상 형식(expected type).  Reference.type과 Reference.reference가 모두 채워지고 Reference.reference가 FHIR URL이면 두가지 모두 일치해야함. 유형(type)은이 참조가 참조하는 유형(type) 인 리소스(resource) 정의의 표준(Canonical) URL임. 참조는 http://hl7.org/fhir/StructureDefinition/과 관련된 URL임. (예) &quot; 환자 &quot; http://hl7.org/fhir/StructureDefinition/Patient에 대한 참조. 절대(absolute) URL은 논리 모델에만 허용됨 (리소스(resource)가 아닌 논리 모델의 참조에서만 사용할 수 있음)." />
    </element>
    <element id="Composition.encounter.identifier">
      <path value="Composition.encounter.identifier" />
      <short value="문자로 표현된(literal) 참조를 알 수 없는 경우 사용하는, 논리적(logical) 참조" />
      <definition value="대상 리소스(resource)의 식별자(identifier). 이것은 다른 리소스(resource)를 직접 참조할 방법이 없을 때 사용- 해당 엔티티(entity)가 FHIR 서버를 통해 사용할 수 없거나  리소스(resource) 작성자가 알려진 식별자(identifier)를 실제 위치로 변활할 방법이 없기 때문에 이 방법이 사용됨. Reference.identifier가 실제로 FHIR 인스턴스로 노출되는 것을 가리킬(point) 필요는 없지만, FHIR 인스턴스로 노출될 것으로 예상되는 비즈니스 개념(concept)을 가리켜야하며, 해당 인스턴스는 참조가 허용되는 FHIR 리소스 타입(resource type)이여야 함." />
    </element>
    <element id="Composition.encounter.identifier.id">
      <path value="Composition.encounter.identifier.id" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
    </element>
    <element id="Composition.encounter.identifier.use">
      <path value="Composition.encounter.identifier.use" />
      <short value="usual | official | temp | secondary | old (If known)" />
      <definition value="해당 식별자(identifier)의 목적" />
    </element>
    <element id="Composition.encounter.identifier.type">
      <path value="Composition.encounter.identifier.type" />
      <short value="식별자(identifier)에 대한 설명" />
      <definition value="특정 목적으로 사용되는 식별자(identifier)를 결정하기 위해 사용하는 식별자(identifier)의 코드화된(coded) 유형(type)을 나타냄." />
    </element>
    <element id="Composition.encounter.identifier.type.id">
      <path value="Composition.encounter.identifier.type.id" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
    </element>
    <element id="Composition.encounter.identifier.type.coding">
      <path value="Composition.encounter.identifier.type.coding" />
      <short value="용어체계(terminology system)에 의해 정의된 코드(code)" />
      <definition value="용어체계(terminology system)에 의해 정의된 코드(code) 참조" />
    </element>
    <element id="Composition.encounter.identifier.type.coding.id">
      <path value="Composition.encounter.identifier.type.coding.id" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
    </element>
    <element id="Composition.encounter.identifier.type.coding.system">
      <path value="Composition.encounter.identifier.type.coding.system" />
      <short value="용어체계 식별(Identity of terminology system)" />
      <definition value="코드(code)에서 기호(symbol)의 의미를 정의하는 CodeSystem[]를 식별" />
    </element>
    <element id="Composition.encounter.identifier.type.coding.version">
      <path value="Composition.encounter.identifier.type.coding.version" />
      <short value="해당 시스템의 버전 정보 - 필요한 경우" />
      <definition value="해당 코드(code)를 선택한 시점에 사용된 CodeSystem[]의 버전임. 올바로 관리된 CodeSystem[]은 코드(code)의 의미가 버전과 관계없이 일관적이므로 버전을 보고할 필요가 없음. 그러나 CodeSystem[]의 관리 상태는 지속적으로 보장할 수 없는 부분이며, 코드(code)의 의미가 일관적임을 보장할 수 없는 경우 버전이 교체되어야 함." />
    </element>
    <element id="Composition.encounter.identifier.type.coding.code">
      <path value="Composition.encounter.identifier.type.coding.code" />
      <short value="시스템에 정의된 구문(syntax)의 기호(symbol)" />
      <definition value="시스템에 정의된 구문(syntax)의 기호(symbol). 기호(symbol)은 CodeSystem[]에 의해 정의된 구문에서 미리 정의된 코드(code) 또는 표현(expression)일 수 있음. (예: post-coordination)" />
    </element>
    <element id="Composition.encounter.identifier.type.coding.display">
      <path value="Composition.encounter.identifier.type.coding.display" />
      <short value="시스템에 정의된 표기(representation)" />
      <definition value="시스템의 규칙(rules)에 따른, 시스템에서 코드(code)의 의미 표기(representation)" />
    </element>
    <element id="Composition.encounter.identifier.type.coding.userSelected">
      <path value="Composition.encounter.identifier.type.coding.userSelected" />
      <short value="해당 코딩(coding)이 사용자(user)에 의해 직접(directly) 선택되었는지 여부" />
      <definition value="해당 코딩(coding)이 사용자(user)에 의해 직접 선택되었음을 나타냄 - (예) 사용가능한 항목(item)의 선택 목록(list) 중 하나 (코드 또는 디스플레이 )" />
    </element>
    <element id="Composition.encounter.identifier.type.text">
      <path value="Composition.encounter.identifier.type.text" />
      <short value="개념(concept)에 대한 일반 텍스트 표현 (plain text representation)" />
      <definition value="데이터를 입력한 사용자(user)의 입장에서 보거나(seen)/선택하거나(selected)/언급한대로(uttered)의 개념(concept), 혹은 사용자(user)가 의도한 의미를 사람이 사용하는 언어로 표현한 것임." />
    </element>
    <element id="Composition.encounter.identifier.system">
      <path value="Composition.encounter.identifier.system" />
      <short value="식별자(identifier) 값의 네임스페이스(namespace)" />
      <definition value="설정 값에 대한 네임스페이스 (namespace), 즉 고유(unique)한 설정값을 설명하는 URL을 설정함." />
    </element>
    <element id="Composition.encounter.identifier.value">
      <path value="Composition.encounter.identifier.value" />
      <short value="고유(unique)한 값(value)" />
      <definition value="일반적으로 사용자(user)와 관련(relevant)이 있으며, 시스템 컨텍스트(context) 내에서 고유(unique)한 식별자(identifier)의 일부분임." />
    </element>
    <element id="Composition.encounter.identifier.period">
      <path value="Composition.encounter.identifier.period" />
      <short value="식별자(identifier)의 유효 기간" />
      <definition value="식별자(identifier)가 사용 가능했거나 가능한 기간을 나타냄." />
    </element>
    <element id="Composition.encounter.identifier.period.id">
      <path value="Composition.encounter.identifier.period.id" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
    </element>
    <element id="Composition.encounter.identifier.period.start">
      <path value="Composition.encounter.identifier.period.start" />
      <short value="해당 유효 기간의 시작 시점 (설정된 날짜 포함)" />
      <definition value="해당 유효 기간이 시작되는 시점을 나타냄. 유효 기간은 시작 시점으로 설정된 날짜를 포함함." />
    </element>
    <element id="Composition.encounter.identifier.period.end">
      <path value="Composition.encounter.identifier.period.end" />
      <short value="해당 유효 기간의 종료 시점 (설정된 날짜 포함)" />
      <definition value="기간의 종료. 기간의 종료가 누락된 경우, 인스턴스가 생성될 때 끝이 알려지거나 계획되지 않았음을 의미함. 시작일은 과거일 수 있고 종료일은 미래일 수 있음. 이는 해당 기간이 해당 시간에 종료될 예정임을 의미함" />
    </element>
    <element id="Composition.encounter.identifier.assigner">
      <path value="Composition.encounter.identifier.assigner" />
      <short value="식별자(identifier)를 발급한 조직(단순 텍스트 기입 가능)" />
      <definition value="식별자(identifier)를 발급/관리하는 조직(organization)" />
    </element>
    <element id="Composition.encounter.display">
      <path value="Composition.encounter.display" />
      <short value="해당 리소스(resource)에 대한 대체 텍스트(alternative text)" />
      <definition value="리소스(resource) 참조 외에도 리소스(resource)를 식별하기 위한 일반 텍스트 설명임." />
    </element>
    <element id="Composition.date">
      <path value="Composition.date" />
      <short value="구성요소(composition)가 수정된 시간" />
      <definition value="작성자가 구성요소(composition)를 마지막으로 수정한 시간을 의미함." />
      <comment value="구성요소(composition)의 마지막 수정일은 변경없고 증명된 문서의 날짜 이후 일 수 있음" />
    </element>
    <element id="Composition.author">
      <path value="Composition.author" />
      <short value="누가 그리고 무슨 구성(composition)을 작성했는지" />
      <definition value="구성요소(composition)의 정보를 책임지는 주체를 식별함." />
      <comment value="참조(reference)는 실제 FHIR 리소스(resource)에 대한 참조(reference)여야 하며, 해결이 가능해야 함 (접근 제어 허용, 일시적인 사용 불가능 등). 해결 방법은 URL에서 검색하거나, 리소스 타입(resource type)별로 적용할 수 있는 경우 절대 참조를 표준(Canonical) URL로 간주하고 로컬 레지스트리/저장소에서 검색하여 확인할 수 있음." />
    </element>
    <element id="Composition.author.id">
      <path value="Composition.author.id" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
    </element>
    <element id="Composition.author.reference">
      <path value="Composition.author.reference" />
      <short value="문자로 표현된(literal) 참조, 상대적, 내부적 혹은 절대적인 URL" />
      <definition value="다른 리소스(resource)를 찾을 수 있는 위치에 대한 참조를 의미함. 해당 참조는 service base URL에 상대적인(relative) 경우 상대적 참조, 혹은 해당 리소스(resource)를 찾을 수 있는 위치인 절대(absolute) URL일 수 있음. 해당 참조는 버전에 따라 다를 수 있음. 해당 참조가 FHIR RESTful 서버가 아닌 경우, 버전에 따라 다른 것으로 간주함. 내부 구문(Internal Fragment) 참조('#'으로 시작)는 포함되어 있는 리소스(resource)를 참조함." />
    </element>
    <element id="Composition.author.type">
      <path value="Composition.author.type" />
      <short value="참조(reference)가 참조(refer)하는 유형(type)  (예. &quot;Patient&quot;)" />
      <definition value="참조 대상의 예상 형식(expected type).  Reference.type과 Reference.reference가 모두 채워지고 Reference.reference가 FHIR URL이면 두가지 모두 일치해야함. 유형(type)은이 참조가 참조하는 유형(type) 인 리소스(resource) 정의의 표준(Canonical) URL임. 참조는 http://hl7.org/fhir/StructureDefinition/과 관련된 URL임. (예) &quot; 환자 &quot; http://hl7.org/fhir/StructureDefinition/Patient에 대한 참조. 절대(absolute) URL은 논리 모델에만 허용됨 (리소스(resource)가 아닌 논리 모델의 참조에서만 사용할 수 있음)." />
    </element>
    <element id="Composition.author.identifier">
      <path value="Composition.author.identifier" />
      <short value="문자로 표현된(literal) 참조를 알 수 없는 경우 사용하는, 논리적(logical) 참조" />
      <definition value="대상 리소스(resource)의 식별자(identifier). 이것은 다른 리소스(resource)를 직접 참조할 방법이 없을 때 사용- 해당 엔티티(entity)가 FHIR 서버를 통해 사용할 수 없거나  리소스(resource) 작성자가 알려진 식별자(identifier)를 실제 위치로 변활할 방법이 없기 때문에 이 방법이 사용됨. Reference.identifier가 실제로 FHIR 인스턴스로 노출되는 것을 가리킬(point) 필요는 없지만, FHIR 인스턴스로 노출될 것으로 예상되는 비즈니스 개념(concept)을 가리켜야하며, 해당 인스턴스는 참조가 허용되는 FHIR 리소스 타입(resource type)이여야 함." />
    </element>
    <element id="Composition.author.identifier.id">
      <path value="Composition.author.identifier.id" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
    </element>
    <element id="Composition.author.identifier.use">
      <path value="Composition.author.identifier.use" />
      <short value="usual | official | temp | secondary | old (If known)" />
      <definition value="해당 식별자(identifier)의 목적" />
    </element>
    <element id="Composition.author.identifier.type">
      <path value="Composition.author.identifier.type" />
      <short value="식별자(identifier)에 대한 설명" />
      <definition value="특정 목적으로 사용되는 식별자(identifier)를 결정하기 위해 사용하는 식별자(identifier)의 코드화된(coded) 유형(type)을 나타냄." />
    </element>
    <element id="Composition.author.identifier.type.id">
      <path value="Composition.author.identifier.type.id" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
    </element>
    <element id="Composition.author.identifier.type.coding">
      <path value="Composition.author.identifier.type.coding" />
      <short value="용어체계(terminology system)에 의해 정의된 코드(code)" />
      <definition value="용어체계(terminology system)에 의해 정의된 코드(code) 참조" />
    </element>
    <element id="Composition.author.identifier.type.coding.id">
      <path value="Composition.author.identifier.type.coding.id" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
    </element>
    <element id="Composition.author.identifier.type.coding.system">
      <path value="Composition.author.identifier.type.coding.system" />
      <short value="용어체계 식별(Identity of terminology system)" />
      <definition value="코드(code)에서 기호(symbol)의 의미를 정의하는 CodeSystem[]를 식별" />
    </element>
    <element id="Composition.author.identifier.type.coding.version">
      <path value="Composition.author.identifier.type.coding.version" />
      <short value="해당 시스템의 버전 정보 - 필요한 경우" />
      <definition value="해당 코드(code)를 선택한 시점에 사용된 CodeSystem[]의 버전임. 올바로 관리된 CodeSystem[]은 코드(code)의 의미가 버전과 관계없이 일관적이므로 버전을 보고할 필요가 없음. 그러나 CodeSystem[]의 관리 상태는 지속적으로 보장할 수 없는 부분이며, 코드(code)의 의미가 일관적임을 보장할 수 없는 경우 버전이 교체되어야 함." />
    </element>
    <element id="Composition.author.identifier.type.coding.code">
      <path value="Composition.author.identifier.type.coding.code" />
      <short value="시스템에 정의된 구문(syntax)의 기호(symbol)" />
      <definition value="시스템에 정의된 구문(syntax)의 기호(symbol). 기호(symbol)은 CodeSystem[]에 의해 정의된 구문에서 미리 정의된 코드(code) 또는 표현(expression)일 수 있음. (예: post-coordination)" />
    </element>
    <element id="Composition.author.identifier.type.coding.display">
      <path value="Composition.author.identifier.type.coding.display" />
      <short value="시스템에 정의된 표기(representation)" />
      <definition value="시스템의 규칙(rules)에 따른, 시스템에서 코드(code)의 의미 표기(representation)" />
    </element>
    <element id="Composition.author.identifier.type.coding.userSelected">
      <path value="Composition.author.identifier.type.coding.userSelected" />
      <short value="해당 코딩(coding)이 사용자(user)에 의해 직접(directly) 선택되었는지 여부" />
      <definition value="해당 코딩(coding)이 사용자(user)에 의해 직접 선택되었음을 나타냄 - (예) 사용가능한 항목(item)의 선택 목록(list) 중 하나 (코드 또는 디스플레이 )" />
    </element>
    <element id="Composition.author.identifier.type.text">
      <path value="Composition.author.identifier.type.text" />
      <short value="개념(concept)에 대한 일반 텍스트 표현 (plain text representation)" />
      <definition value="데이터를 입력한 사용자(user)의 입장에서 보거나(seen)/선택하거나(selected)/언급한대로(uttered)의 개념(concept), 혹은 사용자(user)가 의도한 의미를 사람이 사용하는 언어로 표현한 것임." />
    </element>
    <element id="Composition.author.identifier.system">
      <path value="Composition.author.identifier.system" />
      <short value="식별자(identifier) 값의 네임스페이스(namespace)" />
      <definition value="설정 값에 대한 네임스페이스 (namespace), 즉 고유(unique)한 설정값을 설명하는 URL을 설정함." />
    </element>
    <element id="Composition.author.identifier.value">
      <path value="Composition.author.identifier.value" />
      <short value="고유(unique)한 값(value)" />
      <definition value="일반적으로 사용자(user)와 관련(relevant)이 있으며, 시스템 컨텍스트(context) 내에서 고유(unique)한 식별자(identifier)의 일부분임." />
    </element>
    <element id="Composition.author.identifier.period">
      <path value="Composition.author.identifier.period" />
      <short value="식별자(identifier)의 유효 기간" />
      <definition value="식별자(identifier)가 사용 가능했거나 가능한 기간을 나타냄." />
    </element>
    <element id="Composition.author.identifier.period.id">
      <path value="Composition.author.identifier.period.id" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
    </element>
    <element id="Composition.author.identifier.period.start">
      <path value="Composition.author.identifier.period.start" />
      <short value="해당 유효 기간의 시작 시점 (설정된 날짜 포함)" />
      <definition value="해당 유효 기간이 시작되는 시점을 나타냄. 유효 기간은 시작 시점으로 설정된 날짜를 포함함." />
    </element>
    <element id="Composition.author.identifier.period.end">
      <path value="Composition.author.identifier.period.end" />
      <short value="해당 유효 기간의 종료 시점 (설정된 날짜 포함)" />
      <definition value="기간의 종료. 기간의 종료가 누락된 경우, 인스턴스가 생성될 때 끝이 알려지거나 계획되지 않았음을 의미함. 시작일은 과거일 수 있고 종료일은 미래일 수 있음. 이는 해당 기간이 해당 시간에 종료될 예정임을 의미함" />
    </element>
    <element id="Composition.author.identifier.assigner">
      <path value="Composition.author.identifier.assigner" />
      <short value="식별자(identifier)를 발급한 조직(단순 텍스트 기입 가능)" />
      <definition value="식별자(identifier)를 발급/관리하는 조직(organization)" />
    </element>
    <element id="Composition.author.display">
      <path value="Composition.author.display" />
      <short value="해당 리소스(resource)에 대한 대체 텍스트(alternative text)" />
      <definition value="리소스(resource) 참조 외에도 리소스(resource)를 식별하기 위한 일반 텍스트 설명임." />
    </element>
    <element id="Composition.title">
      <path value="Composition.title" />
      <short value="사람이 읽을 수 있는 이름 명칭" />
      <definition value="사람이 읽을 수 있는 구성요소(composition)의 공식 라벨(label)을 의미함." />
      <comment value="많은 Composition[]에서 Composition.type의 디스플레이 이름 또는 텍스트(text)와 같음 (예: a &quot;consultation&quot; or &quot;progress note&quot;). CDA는 제목(title)이 의무적이진 않지만 제목을 생략할 경우의 유용했던 사례가 없으므로 필수로 함. 시험사용기간 중 이 요구사항에 대한 피드백 환영함" />
    </element>
    <element id="Composition.confidentiality">
      <path value="Composition.confidentiality" />
      <short value="해당 코드는 구성요소(composition)의 기밀 수준" />
      <definition value="해당 코드는 구성요소(composition)의 기밀 수준을 지정함." />
      <comment value="이 요소(element)에 정확한 사용, 강제 및 매우 민감한 문서관련 이슈는 기본 사양(specification)범위를 벗어나고, 프로파일 구현에서 다룬다(보안 섹션 참조). 기밀문서가 아닌것처럼 다뤄지면 안되므로 이 요소는 수정자(modifier)로 지정됨" />
    </element>
    <element id="Composition.attester">
      <path value="Composition.attester" />
      <short value="구성요소(composition)의 정확성을 인증하는 사람/기관" />
      <definition value="composition/document의 정확성을 시험한 참가자" />
      <comment value="attester(시험자)는 한번씩만 나열함" />
    </element>
    <element id="Composition.attester.id">
      <path value="Composition.attester.id" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
    </element>
    <element id="Composition.attester.mode">
      <path value="Composition.attester.mode" />
      <short value="personal | professional | legal | official" />
      <definition value="인증자가 제공하는 증명의 유형" />
      <comment value="FHIR 문자열(string)은 크기가 1MB를 초과하지 않아야함." />
    </element>
    <element id="Composition.attester.time">
      <path value="Composition.attester.time" />
      <short value="구성요소(composition)가 인증된 시점" />
      <definition value="구성요소(composition)가 인증된 시점을 의미함." />
    </element>
    <element id="Composition.attester.party">
      <path value="Composition.attester.party" />
      <short value="구성요소(composition)을 인증하는 그룹" />
      <definition value="지정된 방식으로 구성요소(composition)을 입증한 사람/기관 속한 그룹을 나타냄." />
      <comment value="참조(reference)는 실제 FHIR 리소스(resource)에 대한 참조(reference)여야 하며, 해결이 가능해야 함 (접근 제어 허용, 일시적인 사용 불가능 등). 해결 방법은 URL에서 검색하거나, 리소스 타입(resource type)별로 적용할 수 있는 경우 절대 참조를 표준(Canonical) URL로 간주하고 로컬 레지스트리/저장소에서 검색하여 확인할 수 있음." />
    </element>
    <element id="Composition.attester.party.id">
      <path value="Composition.attester.party.id" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
    </element>
    <element id="Composition.attester.party.reference">
      <path value="Composition.attester.party.reference" />
      <short value="문자로 표현된(literal) 참조, 상대적, 내부적 혹은 절대적인 URL" />
      <definition value="다른 리소스(resource)를 찾을 수 있는 위치에 대한 참조를 의미함. 해당 참조는 service base URL에 상대적인(relative) 경우 상대적 참조, 혹은 해당 리소스(resource)를 찾을 수 있는 위치인 절대(absolute) URL일 수 있음. 해당 참조는 버전에 따라 다를 수 있음. 해당 참조가 FHIR RESTful 서버가 아닌 경우, 버전에 따라 다른 것으로 간주함. 내부 구문(Internal Fragment) 참조('#'으로 시작)는 포함되어 있는 리소스(resource)를 참조함." />
    </element>
    <element id="Composition.attester.party.type">
      <path value="Composition.attester.party.type" />
      <short value="참조(reference)가 참조(refer)하는 유형(type)  (예. &quot;Patient&quot;)" />
      <definition value="참조 대상의 예상 형식(expected type).  Reference.type과 Reference.reference가 모두 채워지고 Reference.reference가 FHIR URL이면 두가지 모두 일치해야함. 유형(type)은이 참조가 참조하는 유형(type) 인 리소스(resource) 정의의 표준(Canonical) URL임. 참조는 http://hl7.org/fhir/StructureDefinition/과 관련된 URL임. (예) &quot; 환자 &quot; http://hl7.org/fhir/StructureDefinition/Patient에 대한 참조. 절대(absolute) URL은 논리 모델에만 허용됨 (리소스(resource)가 아닌 논리 모델의 참조에서만 사용할 수 있음)." />
    </element>
    <element id="Composition.attester.party.identifier">
      <path value="Composition.attester.party.identifier" />
      <short value="문자로 표현된(literal) 참조를 알 수 없는 경우 사용하는, 논리적(logical) 참조" />
      <definition value="대상 리소스(resource)의 식별자(identifier). 이것은 다른 리소스(resource)를 직접 참조할 방법이 없을 때 사용- 해당 엔티티(entity)가 FHIR 서버를 통해 사용할 수 없거나  리소스(resource) 작성자가 알려진 식별자(identifier)를 실제 위치로 변활할 방법이 없기 때문에 이 방법이 사용됨. Reference.identifier가 실제로 FHIR 인스턴스로 노출되는 것을 가리킬(point) 필요는 없지만, FHIR 인스턴스로 노출될 것으로 예상되는 비즈니스 개념(concept)을 가리켜야하며, 해당 인스턴스는 참조가 허용되는 FHIR 리소스 타입(resource type)이여야 함." />
    </element>
    <element id="Composition.attester.party.identifier.id">
      <path value="Composition.attester.party.identifier.id" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
    </element>
    <element id="Composition.attester.party.identifier.use">
      <path value="Composition.attester.party.identifier.use" />
      <short value="usual | official | temp | secondary | old (If known)" />
      <definition value="해당 식별자(identifier)의 목적" />
    </element>
    <element id="Composition.attester.party.identifier.type">
      <path value="Composition.attester.party.identifier.type" />
      <short value="식별자(identifier)에 대한 설명" />
      <definition value="특정 목적으로 사용되는 식별자(identifier)를 결정하기 위해 사용하는 식별자(identifier)의 코드화된(coded) 유형(type)을 나타냄." />
    </element>
    <element id="Composition.attester.party.identifier.type.id">
      <path value="Composition.attester.party.identifier.type.id" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
    </element>
    <element id="Composition.attester.party.identifier.type.coding">
      <path value="Composition.attester.party.identifier.type.coding" />
      <short value="용어체계(terminology system)에 의해 정의된 코드(code)" />
      <definition value="용어체계(terminology system)에 의해 정의된 코드(code) 참조" />
    </element>
    <element id="Composition.attester.party.identifier.type.coding.id">
      <path value="Composition.attester.party.identifier.type.coding.id" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
    </element>
    <element id="Composition.attester.party.identifier.type.coding.system">
      <path value="Composition.attester.party.identifier.type.coding.system" />
      <short value="용어체계 식별(Identity of terminology system)" />
      <definition value="코드(code)에서 기호(symbol)의 의미를 정의하는 CodeSystem[]를 식별" />
    </element>
    <element id="Composition.attester.party.identifier.type.coding.version">
      <path value="Composition.attester.party.identifier.type.coding.version" />
      <short value="해당 시스템의 버전 정보 - 필요한 경우" />
      <definition value="해당 코드(code)를 선택한 시점에 사용된 CodeSystem[]의 버전임. 올바로 관리된 CodeSystem[]은 코드(code)의 의미가 버전과 관계없이 일관적이므로 버전을 보고할 필요가 없음. 그러나 CodeSystem[]의 관리 상태는 지속적으로 보장할 수 없는 부분이며, 코드(code)의 의미가 일관적임을 보장할 수 없는 경우 버전이 교체되어야 함." />
    </element>
    <element id="Composition.attester.party.identifier.type.coding.code">
      <path value="Composition.attester.party.identifier.type.coding.code" />
      <short value="시스템에 정의된 구문(syntax)의 기호(symbol)" />
      <definition value="시스템에 정의된 구문(syntax)의 기호(symbol). 기호(symbol)은 CodeSystem[]에 의해 정의된 구문에서 미리 정의된 코드(code) 또는 표현(expression)일 수 있음. (예: post-coordination)" />
    </element>
    <element id="Composition.attester.party.identifier.type.coding.display">
      <path value="Composition.attester.party.identifier.type.coding.display" />
      <short value="시스템에 정의된 표기(representation)" />
      <definition value="시스템의 규칙(rules)에 따른, 시스템에서 코드(code)의 의미 표기(representation)" />
    </element>
    <element id="Composition.attester.party.identifier.type.coding.userSelected">
      <path value="Composition.attester.party.identifier.type.coding.userSelected" />
      <short value="해당 코딩(coding)이 사용자(user)에 의해 직접(directly) 선택되었는지 여부" />
      <definition value="해당 코딩(coding)이 사용자(user)에 의해 직접 선택되었음을 나타냄 - (예) 사용가능한 항목(item)의 선택 목록(list) 중 하나 (코드 또는 디스플레이 )" />
    </element>
    <element id="Composition.attester.party.identifier.type.text">
      <path value="Composition.attester.party.identifier.type.text" />
      <short value="개념(concept)에 대한 일반 텍스트 표현 (plain text representation)" />
      <definition value="데이터를 입력한 사용자(user)의 입장에서 보거나(seen)/선택하거나(selected)/언급한대로(uttered)의 개념(concept), 혹은 사용자(user)가 의도한 의미를 사람이 사용하는 언어로 표현한 것임." />
    </element>
    <element id="Composition.attester.party.identifier.system">
      <path value="Composition.attester.party.identifier.system" />
      <short value="식별자(identifier) 값의 네임스페이스(namespace)" />
      <definition value="설정 값에 대한 네임스페이스 (namespace), 즉 고유(unique)한 설정값을 설명하는 URL을 설정함." />
    </element>
    <element id="Composition.attester.party.identifier.value">
      <path value="Composition.attester.party.identifier.value" />
      <short value="고유(unique)한 값(value)" />
      <definition value="일반적으로 사용자(user)와 관련(relevant)이 있으며, 시스템 컨텍스트(context) 내에서 고유(unique)한 식별자(identifier)의 일부분임." />
    </element>
    <element id="Composition.attester.party.identifier.period">
      <path value="Composition.attester.party.identifier.period" />
      <short value="식별자(identifier)의 유효 기간" />
      <definition value="식별자(identifier)가 사용 가능했거나 가능한 기간을 나타냄." />
    </element>
    <element id="Composition.attester.party.identifier.period.id">
      <path value="Composition.attester.party.identifier.period.id" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
    </element>
    <element id="Composition.attester.party.identifier.period.start">
      <path value="Composition.attester.party.identifier.period.start" />
      <short value="해당 유효 기간의 시작 시점 (설정된 날짜 포함)" />
      <definition value="해당 유효 기간이 시작되는 시점을 나타냄. 유효 기간은 시작 시점으로 설정된 날짜를 포함함." />
    </element>
    <element id="Composition.attester.party.identifier.period.end">
      <path value="Composition.attester.party.identifier.period.end" />
      <short value="해당 유효 기간의 종료 시점 (설정된 날짜 포함)" />
      <definition value="기간의 종료. 기간의 종료가 누락된 경우, 인스턴스가 생성될 때 끝이 알려지거나 계획되지 않았음을 의미함. 시작일은 과거일 수 있고 종료일은 미래일 수 있음. 이는 해당 기간이 해당 시간에 종료될 예정임을 의미함" />
    </element>
    <element id="Composition.attester.party.identifier.assigner">
      <path value="Composition.attester.party.identifier.assigner" />
      <short value="식별자(identifier)를 발급한 조직(단순 텍스트 기입 가능)" />
      <definition value="식별자(identifier)를 발급/관리하는 조직(organization)" />
    </element>
    <element id="Composition.attester.party.display">
      <path value="Composition.attester.party.display" />
      <short value="해당 리소스(resource)에 대한 대체 텍스트(alternative text)" />
      <definition value="리소스(resource) 참조 외에도 리소스(resource)를 식별하기 위한 일반 텍스트 설명임." />
    </element>
    <element id="Composition.custodian">
      <path value="Composition.custodian" />
      <short value="구성요소(composition)를 유지하는 그룹." />
      <definition value="composition/document 정보 접근과 유지관리를 책임지는 조직이나 그룹을 식별함" />
      <comment value="문서가 Composition[]으로 부터 파생된 경우 유용함. document의 최신 버전을 가져오는 방법에 대한 가이드를 제공. 이것은 때때로 저작인증시스템이 알수없고, 컨텍스트에 따라 추론이 될 수 있기 때문에 선택사항임. 그러나 파생된 문서를 작업할 때 이 정보를 아는 것이 중요하므로, 이것을(custodian)를 제공하는것을 권장함" />
    </element>
    <element id="Composition.custodian.id">
      <path value="Composition.custodian.id" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
    </element>
    <element id="Composition.custodian.reference">
      <path value="Composition.custodian.reference" />
      <short value="문자로 표현된(literal) 참조, 상대적, 내부적 혹은 절대적인 URL" />
      <definition value="다른 리소스(resource)를 찾을 수 있는 위치에 대한 참조를 의미함. 해당 참조는 service base URL에 상대적인(relative) 경우 상대적 참조, 혹은 해당 리소스(resource)를 찾을 수 있는 위치인 절대(absolute) URL일 수 있음. 해당 참조는 버전에 따라 다를 수 있음. 해당 참조가 FHIR RESTful 서버가 아닌 경우, 버전에 따라 다른 것으로 간주함. 내부 구문(Internal Fragment) 참조('#'으로 시작)는 포함되어 있는 리소스(resource)를 참조함." />
    </element>
    <element id="Composition.custodian.type">
      <path value="Composition.custodian.type" />
      <short value="참조(reference)가 참조(refer)하는 유형(type)  (예. &quot;Patient&quot;)" />
      <definition value="참조 대상의 예상 형식(expected type).  Reference.type과 Reference.reference가 모두 채워지고 Reference.reference가 FHIR URL이면 두가지 모두 일치해야함. 유형(type)은이 참조가 참조하는 유형(type) 인 리소스(resource) 정의의 표준(Canonical) URL임. 참조는 http://hl7.org/fhir/StructureDefinition/과 관련된 URL임. (예) &quot; 환자 &quot; http://hl7.org/fhir/StructureDefinition/Patient에 대한 참조. 절대(absolute) URL은 논리 모델에만 허용됨 (리소스(resource)가 아닌 논리 모델의 참조에서만 사용할 수 있음)." />
    </element>
    <element id="Composition.custodian.identifier">
      <path value="Composition.custodian.identifier" />
      <short value="문자로 표현된(literal) 참조를 알 수 없는 경우 사용하는, 논리적(logical) 참조" />
      <definition value="대상 리소스(resource)의 식별자(identifier). 이것은 다른 리소스(resource)를 직접 참조할 방법이 없을 때 사용- 해당 엔티티(entity)가 FHIR 서버를 통해 사용할 수 없거나  리소스(resource) 작성자가 알려진 식별자(identifier)를 실제 위치로 변활할 방법이 없기 때문에 이 방법이 사용됨. Reference.identifier가 실제로 FHIR 인스턴스로 노출되는 것을 가리킬(point) 필요는 없지만, FHIR 인스턴스로 노출될 것으로 예상되는 비즈니스 개념(concept)을 가리켜야하며, 해당 인스턴스는 참조가 허용되는 FHIR 리소스 타입(resource type)이여야 함." />
    </element>
    <element id="Composition.custodian.identifier.id">
      <path value="Composition.custodian.identifier.id" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
    </element>
    <element id="Composition.custodian.identifier.use">
      <path value="Composition.custodian.identifier.use" />
      <short value="usual | official | temp | secondary | old (If known)" />
      <definition value="해당 식별자(identifier)의 목적" />
    </element>
    <element id="Composition.custodian.identifier.type">
      <path value="Composition.custodian.identifier.type" />
      <short value="식별자(identifier)에 대한 설명" />
      <definition value="특정 목적으로 사용되는 식별자(identifier)를 결정하기 위해 사용하는 식별자(identifier)의 코드화된(coded) 유형(type)을 나타냄." />
    </element>
    <element id="Composition.custodian.identifier.type.id">
      <path value="Composition.custodian.identifier.type.id" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
    </element>
    <element id="Composition.custodian.identifier.type.coding">
      <path value="Composition.custodian.identifier.type.coding" />
      <short value="용어체계(terminology system)에 의해 정의된 코드(code)" />
      <definition value="용어체계(terminology system)에 의해 정의된 코드(code) 참조" />
    </element>
    <element id="Composition.custodian.identifier.type.coding.id">
      <path value="Composition.custodian.identifier.type.coding.id" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
    </element>
    <element id="Composition.custodian.identifier.type.coding.system">
      <path value="Composition.custodian.identifier.type.coding.system" />
      <short value="용어체계 식별(Identity of terminology system)" />
      <definition value="코드(code)에서 기호(symbol)의 의미를 정의하는 CodeSystem[]를 식별" />
    </element>
    <element id="Composition.custodian.identifier.type.coding.version">
      <path value="Composition.custodian.identifier.type.coding.version" />
      <short value="해당 시스템의 버전 정보 - 필요한 경우" />
      <definition value="해당 코드(code)를 선택한 시점에 사용된 CodeSystem[]의 버전임. 올바로 관리된 CodeSystem[]은 코드(code)의 의미가 버전과 관계없이 일관적이므로 버전을 보고할 필요가 없음. 그러나 CodeSystem[]의 관리 상태는 지속적으로 보장할 수 없는 부분이며, 코드(code)의 의미가 일관적임을 보장할 수 없는 경우 버전이 교체되어야 함." />
    </element>
    <element id="Composition.custodian.identifier.type.coding.code">
      <path value="Composition.custodian.identifier.type.coding.code" />
      <short value="시스템에 정의된 구문(syntax)의 기호(symbol)" />
      <definition value="시스템에 정의된 구문(syntax)의 기호(symbol). 기호(symbol)은 CodeSystem[]에 의해 정의된 구문에서 미리 정의된 코드(code) 또는 표현(expression)일 수 있음. (예: post-coordination)" />
    </element>
    <element id="Composition.custodian.identifier.type.coding.display">
      <path value="Composition.custodian.identifier.type.coding.display" />
      <short value="시스템에 정의된 표기(representation)" />
      <definition value="시스템의 규칙(rules)에 따른, 시스템에서 코드(code)의 의미 표기(representation)" />
    </element>
    <element id="Composition.custodian.identifier.type.coding.userSelected">
      <path value="Composition.custodian.identifier.type.coding.userSelected" />
      <short value="해당 코딩(coding)이 사용자(user)에 의해 직접(directly) 선택되었는지 여부" />
      <definition value="해당 코딩(coding)이 사용자(user)에 의해 직접 선택되었음을 나타냄 - (예) 사용가능한 항목(item)의 선택 목록(list) 중 하나 (코드 또는 디스플레이 )" />
    </element>
    <element id="Composition.custodian.identifier.type.text">
      <path value="Composition.custodian.identifier.type.text" />
      <short value="개념(concept)에 대한 일반 텍스트 표현 (plain text representation)" />
      <definition value="데이터를 입력한 사용자(user)의 입장에서 보거나(seen)/선택하거나(selected)/언급한대로(uttered)의 개념(concept), 혹은 사용자(user)가 의도한 의미를 사람이 사용하는 언어로 표현한 것임." />
    </element>
    <element id="Composition.custodian.identifier.system">
      <path value="Composition.custodian.identifier.system" />
      <short value="식별자(identifier) 값의 네임스페이스(namespace)" />
      <definition value="설정 값에 대한 네임스페이스 (namespace), 즉 고유(unique)한 설정값을 설명하는 URL을 설정함." />
    </element>
    <element id="Composition.custodian.identifier.value">
      <path value="Composition.custodian.identifier.value" />
      <short value="고유(unique)한 값(value)" />
      <definition value="일반적으로 사용자(user)와 관련(relevant)이 있으며, 시스템 컨텍스트(context) 내에서 고유(unique)한 식별자(identifier)의 일부분임." />
    </element>
    <element id="Composition.custodian.identifier.period">
      <path value="Composition.custodian.identifier.period" />
      <short value="식별자(identifier)의 유효 기간" />
      <definition value="식별자(identifier)가 사용 가능했거나 가능한 기간을 나타냄." />
    </element>
    <element id="Composition.custodian.identifier.period.id">
      <path value="Composition.custodian.identifier.period.id" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
    </element>
    <element id="Composition.custodian.identifier.period.start">
      <path value="Composition.custodian.identifier.period.start" />
      <short value="해당 유효 기간의 시작 시점 (설정된 날짜 포함)" />
      <definition value="해당 유효 기간이 시작되는 시점을 나타냄. 유효 기간은 시작 시점으로 설정된 날짜를 포함함." />
    </element>
    <element id="Composition.custodian.identifier.period.end">
      <path value="Composition.custodian.identifier.period.end" />
      <short value="해당 유효 기간의 종료 시점 (설정된 날짜 포함)" />
      <definition value="기간의 종료. 기간의 종료가 누락된 경우, 인스턴스가 생성될 때 끝이 알려지거나 계획되지 않았음을 의미함. 시작일은 과거일 수 있고 종료일은 미래일 수 있음. 이는 해당 기간이 해당 시간에 종료될 예정임을 의미함" />
    </element>
    <element id="Composition.custodian.identifier.assigner">
      <path value="Composition.custodian.identifier.assigner" />
      <short value="식별자(identifier)를 발급한 조직(단순 텍스트 기입 가능)" />
      <definition value="식별자(identifier)를 발급/관리하는 조직(organization)" />
    </element>
    <element id="Composition.custodian.display">
      <path value="Composition.custodian.display" />
      <short value="해당 리소스(resource)에 대한 대체 텍스트(alternative text)" />
      <definition value="리소스(resource) 참조 외에도 리소스(resource)를 식별하기 위한 일반 텍스트 설명임." />
    </element>
    <element id="Composition.relatesTo">
      <path value="Composition.relatesTo" />
      <short value="다른 compositions/documents과의 관계" />
      <definition value="해당 구성요소(composition)와 이미 존재하는 다른 구성요소 혹은 문서와의 관계를 나타냄." />
      <comment value="문서는 버전 별 구성요소(composition) 임" />
    </element>
    <element id="Composition.relatesTo.id">
      <path value="Composition.relatesTo.id" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
    </element>
    <element id="Composition.relatesTo.code">
      <path value="Composition.relatesTo.code" />
      <short value="replaces | transforms | signs | appends" />
      <definition value="해당 구성요소(composition)과 다른 구성요소(composition) 혹은 문서와의 연관성을 나타내는 관계 유형." />
      <comment value="해당 문서(document)가 다른 문서를 추가하는 경우, 참조된 문서에 대한 접근 없이 문서를 완전히 이해할 수 없음." />
    </element>
    <element id="Composition.relatesTo.target[x]">
      <path value="Composition.relatesTo.target[x]" />
      <short value="해당 관계의 대상(target)" />
      <definition value="이 관계의 대상 composition/document" />
    </element>
    <element id="Composition.event">
      <path value="Composition.event" />
      <short value="문서화된 진료 서비스" />
      <definition value="대장 내시경 검사 혹은 충수 절제술 과 같은 진료 서비스의 문서화를 나타냄." />
      <comment value="원하는 경우 추가 정보를 제공 할 수 있지만 이벤트(event)요소는 type 요소와 일치해야 함" />
    </element>
    <element id="Composition.event.id">
      <path value="Composition.event.id" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
    </element>
    <element id="Composition.event.code">
      <path value="Composition.event.code" />
      <short value="문서화된 이벤트의 코드" />
      <definition value="해당 코드 목록은 기록 된 대장 내시경 검사 혹은 충수 절제술과 같은 임상적 행위를 나타냄. 특정 경우, 이벤트가 기록된 절차가 typeCode에 내재되어 있음. (예 : 이력 [History] 및 건강검진표 [ Physical Report])" />
      <comment value="event 요소는 &quot;colonoscopy&quot;의 절차를 담은 &quot;Procedure Report&quot; typeCode에 내재된 행위(act)도 전문적으로 다룰 수도 있음. 하나 이상의 eventCodes가 포함된 경우, classCode, practiceSettingCode 또는 typeCode에 내재된 값과 충돌하면 모호한 상황이 발생할 수 있기 때문에 피해야 함. 이 짧은 코드 리스트는 특정 유형의 쿼리를 위한 키워드로 사용됨" />
    </element>
    <element id="Composition.event.code.id">
      <path value="Composition.event.code.id" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
    </element>
    <element id="Composition.event.code.coding">
      <path value="Composition.event.code.coding" />
      <short value="용어체계(terminology system)에 의해 정의된 코드(code)" />
      <definition value="용어체계(terminology system)에 의해 정의된 코드(code) 참조" />
    </element>
    <element id="Composition.event.code.coding.id">
      <path value="Composition.event.code.coding.id" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
    </element>
    <element id="Composition.event.code.coding.system">
      <path value="Composition.event.code.coding.system" />
      <short value="용어체계 식별(Identity of terminology system)" />
      <definition value="코드(code)에서 기호(symbol)의 의미를 정의하는 CodeSystem[]를 식별" />
    </element>
    <element id="Composition.event.code.coding.version">
      <path value="Composition.event.code.coding.version" />
      <short value="해당 시스템의 버전 정보 - 필요한 경우" />
      <definition value="해당 코드(code)를 선택한 시점에 사용된 CodeSystem[]의 버전임. 올바로 관리된 CodeSystem[]은 코드(code)의 의미가 버전과 관계없이 일관적이므로 버전을 보고할 필요가 없음. 그러나 CodeSystem[]의 관리 상태는 지속적으로 보장할 수 없는 부분이며, 코드(code)의 의미가 일관적임을 보장할 수 없는 경우 버전이 교체되어야 함." />
    </element>
    <element id="Composition.event.code.coding.code">
      <path value="Composition.event.code.coding.code" />
      <short value="시스템에 정의된 구문(syntax)의 기호(symbol)" />
      <definition value="시스템에 정의된 구문(syntax)의 기호(symbol). 기호(symbol)은 CodeSystem[]에 의해 정의된 구문에서 미리 정의된 코드(code) 또는 표현(expression)일 수 있음. (예: post-coordination)" />
    </element>
    <element id="Composition.event.code.coding.display">
      <path value="Composition.event.code.coding.display" />
      <short value="시스템에 정의된 표기(representation)" />
      <definition value="시스템의 규칙(rules)에 따른, 시스템에서 코드(code)의 의미 표기(representation)" />
    </element>
    <element id="Composition.event.code.coding.userSelected">
      <path value="Composition.event.code.coding.userSelected" />
      <short value="해당 코딩(coding)이 사용자(user)에 의해 직접(directly) 선택되었는지 여부" />
      <definition value="해당 코딩(coding)이 사용자(user)에 의해 직접 선택되었음을 나타냄 - (예) 사용가능한 항목(item)의 선택 목록(list) 중 하나 (코드 또는 디스플레이 )" />
    </element>
    <element id="Composition.event.code.text">
      <path value="Composition.event.code.text" />
      <short value="개념(concept)에 대한 일반 텍스트 표현 (plain text representation)" />
      <definition value="데이터를 입력한 사용자(user)의 입장에서 보거나(seen)/선택하거나(selected)/언급한대로(uttered)의 개념(concept), 혹은 사용자(user)가 의도한 의미를 사람이 사용하는 언어로 표현한 것임." />
    </element>
    <element id="Composition.event.period">
      <path value="Composition.event.period" />
      <short value="문서의 유효 기간" />
      <definition value="이벤트가 문서화 된 기간을 의미함." />
      <comment value="기간(Period)은 시간 범위를 지정함. 사용 컨텍스트(context)는 전체 범위가 적용되는지 (예: &quot;the patient was an inpatient of the hospital for this time range&quot;) 또는 범위에서 하나의 값이 적용되는지 (예:&quot;give to the patient between these two times&quot;) 지정됨. Period는 기간 (경과 시간 측정) 동안 사용되지 않음. [Duration] (datatypes.html # Duration) 참조" />
    </element>
    <element id="Composition.event.period.id">
      <path value="Composition.event.period.id" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
    </element>
    <element id="Composition.event.period.start">
      <path value="Composition.event.period.start" />
      <short value="해당 유효 기간의 시작 시점 (설정된 날짜 포함)" />
      <definition value="해당 유효 기간이 시작되는 시점을 나타냄. 유효 기간은 시작 시점으로 설정된 날짜를 포함함." />
    </element>
    <element id="Composition.event.period.end">
      <path value="Composition.event.period.end" />
      <short value="해당 유효 기간의 종료 시점 (설정된 날짜 포함)" />
      <definition value="기간의 종료. 기간의 종료가 누락된 경우, 인스턴스가 생성될 때 끝이 알려지거나 계획되지 않았음을 의미함. 시작일은 과거일 수 있고 종료일은 미래일 수 있음. 이는 해당 기간이 해당 시간에 종료될 예정임을 의미함" />
    </element>
    <element id="Composition.event.detail">
      <path value="Composition.event.detail" />
      <short value="문서화 되는 이벤트" />
      <definition value="문서화되는 이벤트에 대한 설명 혹은 참조를 나타냄. (예 : 대장 내시경 검사 혹은 충수 절제술을 문서화 하는데 사용 됨.)" />
      <comment value="참조(reference)는 실제 FHIR 리소스(resource)에 대한 참조(reference)여야 하며, 해결이 가능해야 함 (접근 제어 허용, 일시적인 사용 불가능 등). 해결 방법은 URL에서 검색하거나, 리소스 타입(resource type)별로 적용할 수 있는 경우 절대 참조를 표준(Canonical) URL로 간주하고 로컬 레지스트리/저장소에서 검색하여 확인할 수 있음." />
    </element>
    <element id="Composition.event.detail.id">
      <path value="Composition.event.detail.id" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
    </element>
    <element id="Composition.event.detail.reference">
      <path value="Composition.event.detail.reference" />
      <short value="문자로 표현된(literal) 참조, 상대적, 내부적 혹은 절대적인 URL" />
      <definition value="다른 리소스(resource)를 찾을 수 있는 위치에 대한 참조를 의미함. 해당 참조는 service base URL에 상대적인(relative) 경우 상대적 참조, 혹은 해당 리소스(resource)를 찾을 수 있는 위치인 절대(absolute) URL일 수 있음. 해당 참조는 버전에 따라 다를 수 있음. 해당 참조가 FHIR RESTful 서버가 아닌 경우, 버전에 따라 다른 것으로 간주함. 내부 구문(Internal Fragment) 참조('#'으로 시작)는 포함되어 있는 리소스(resource)를 참조함." />
    </element>
    <element id="Composition.event.detail.type">
      <path value="Composition.event.detail.type" />
      <short value="참조(reference)가 참조(refer)하는 유형(type)  (예. &quot;Patient&quot;)" />
      <definition value="참조 대상의 예상 형식(expected type).  Reference.type과 Reference.reference가 모두 채워지고 Reference.reference가 FHIR URL이면 두가지 모두 일치해야함. 유형(type)은이 참조가 참조하는 유형(type) 인 리소스(resource) 정의의 표준(Canonical) URL임. 참조는 http://hl7.org/fhir/StructureDefinition/과 관련된 URL임. (예) &quot; 환자 &quot; http://hl7.org/fhir/StructureDefinition/Patient에 대한 참조. 절대(absolute) URL은 논리 모델에만 허용됨 (리소스(resource)가 아닌 논리 모델의 참조에서만 사용할 수 있음)." />
    </element>
    <element id="Composition.event.detail.identifier">
      <path value="Composition.event.detail.identifier" />
      <short value="문자로 표현된(literal) 참조를 알 수 없는 경우 사용하는, 논리적(logical) 참조" />
      <definition value="대상 리소스(resource)의 식별자(identifier). 이것은 다른 리소스(resource)를 직접 참조할 방법이 없을 때 사용- 해당 엔티티(entity)가 FHIR 서버를 통해 사용할 수 없거나  리소스(resource) 작성자가 알려진 식별자(identifier)를 실제 위치로 변활할 방법이 없기 때문에 이 방법이 사용됨. Reference.identifier가 실제로 FHIR 인스턴스로 노출되는 것을 가리킬(point) 필요는 없지만, FHIR 인스턴스로 노출될 것으로 예상되는 비즈니스 개념(concept)을 가리켜야하며, 해당 인스턴스는 참조가 허용되는 FHIR 리소스 타입(resource type)이여야 함." />
    </element>
    <element id="Composition.event.detail.identifier.id">
      <path value="Composition.event.detail.identifier.id" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
    </element>
    <element id="Composition.event.detail.identifier.use">
      <path value="Composition.event.detail.identifier.use" />
      <short value="usual | official | temp | secondary | old (If known)" />
      <definition value="해당 식별자(identifier)의 목적" />
    </element>
    <element id="Composition.event.detail.identifier.type">
      <path value="Composition.event.detail.identifier.type" />
      <short value="식별자(identifier)에 대한 설명" />
      <definition value="특정 목적으로 사용되는 식별자(identifier)를 결정하기 위해 사용하는 식별자(identifier)의 코드화된(coded) 유형(type)을 나타냄." />
    </element>
    <element id="Composition.event.detail.identifier.type.id">
      <path value="Composition.event.detail.identifier.type.id" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
    </element>
    <element id="Composition.event.detail.identifier.type.coding">
      <path value="Composition.event.detail.identifier.type.coding" />
      <short value="용어체계(terminology system)에 의해 정의된 코드(code)" />
      <definition value="용어체계(terminology system)에 의해 정의된 코드(code) 참조" />
    </element>
    <element id="Composition.event.detail.identifier.type.coding.id">
      <path value="Composition.event.detail.identifier.type.coding.id" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
    </element>
    <element id="Composition.event.detail.identifier.type.coding.system">
      <path value="Composition.event.detail.identifier.type.coding.system" />
      <short value="용어체계 식별(Identity of terminology system)" />
      <definition value="코드(code)에서 기호(symbol)의 의미를 정의하는 CodeSystem[]를 식별" />
    </element>
    <element id="Composition.event.detail.identifier.type.coding.version">
      <path value="Composition.event.detail.identifier.type.coding.version" />
      <short value="해당 시스템의 버전 정보 - 필요한 경우" />
      <definition value="해당 코드(code)를 선택한 시점에 사용된 CodeSystem[]의 버전임. 올바로 관리된 CodeSystem[]은 코드(code)의 의미가 버전과 관계없이 일관적이므로 버전을 보고할 필요가 없음. 그러나 CodeSystem[]의 관리 상태는 지속적으로 보장할 수 없는 부분이며, 코드(code)의 의미가 일관적임을 보장할 수 없는 경우 버전이 교체되어야 함." />
    </element>
    <element id="Composition.event.detail.identifier.type.coding.code">
      <path value="Composition.event.detail.identifier.type.coding.code" />
      <short value="시스템에 정의된 구문(syntax)의 기호(symbol)" />
      <definition value="시스템에 정의된 구문(syntax)의 기호(symbol). 기호(symbol)은 CodeSystem[]에 의해 정의된 구문에서 미리 정의된 코드(code) 또는 표현(expression)일 수 있음. (예: post-coordination)" />
    </element>
    <element id="Composition.event.detail.identifier.type.coding.display">
      <path value="Composition.event.detail.identifier.type.coding.display" />
      <short value="시스템에 정의된 표기(representation)" />
      <definition value="시스템의 규칙(rules)에 따른, 시스템에서 코드(code)의 의미 표기(representation)" />
    </element>
    <element id="Composition.event.detail.identifier.type.coding.userSelected">
      <path value="Composition.event.detail.identifier.type.coding.userSelected" />
      <short value="해당 코딩(coding)이 사용자(user)에 의해 직접(directly) 선택되었는지 여부" />
      <definition value="해당 코딩(coding)이 사용자(user)에 의해 직접 선택되었음을 나타냄 - (예) 사용가능한 항목(item)의 선택 목록(list) 중 하나 (코드 또는 디스플레이 )" />
    </element>
    <element id="Composition.event.detail.identifier.type.text">
      <path value="Composition.event.detail.identifier.type.text" />
      <short value="개념(concept)에 대한 일반 텍스트 표현 (plain text representation)" />
      <definition value="데이터를 입력한 사용자(user)의 입장에서 보거나(seen)/선택하거나(selected)/언급한대로(uttered)의 개념(concept), 혹은 사용자(user)가 의도한 의미를 사람이 사용하는 언어로 표현한 것임." />
    </element>
    <element id="Composition.event.detail.identifier.system">
      <path value="Composition.event.detail.identifier.system" />
      <short value="식별자(identifier) 값의 네임스페이스(namespace)" />
      <definition value="설정 값에 대한 네임스페이스 (namespace), 즉 고유(unique)한 설정값을 설명하는 URL을 설정함." />
    </element>
    <element id="Composition.event.detail.identifier.value">
      <path value="Composition.event.detail.identifier.value" />
      <short value="고유(unique)한 값(value)" />
      <definition value="일반적으로 사용자(user)와 관련(relevant)이 있으며, 시스템 컨텍스트(context) 내에서 고유(unique)한 식별자(identifier)의 일부분임." />
    </element>
    <element id="Composition.event.detail.identifier.period">
      <path value="Composition.event.detail.identifier.period" />
      <short value="식별자(identifier)의 유효 기간" />
      <definition value="식별자(identifier)가 사용 가능했거나 가능한 기간을 나타냄." />
    </element>
    <element id="Composition.event.detail.identifier.period.id">
      <path value="Composition.event.detail.identifier.period.id" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
    </element>
    <element id="Composition.event.detail.identifier.period.start">
      <path value="Composition.event.detail.identifier.period.start" />
      <short value="해당 유효 기간의 시작 시점 (설정된 날짜 포함)" />
      <definition value="해당 유효 기간이 시작되는 시점을 나타냄. 유효 기간은 시작 시점으로 설정된 날짜를 포함함." />
    </element>
    <element id="Composition.event.detail.identifier.period.end">
      <path value="Composition.event.detail.identifier.period.end" />
      <short value="해당 유효 기간의 종료 시점 (설정된 날짜 포함)" />
      <definition value="기간의 종료. 기간의 종료가 누락된 경우, 인스턴스가 생성될 때 끝이 알려지거나 계획되지 않았음을 의미함. 시작일은 과거일 수 있고 종료일은 미래일 수 있음. 이는 해당 기간이 해당 시간에 종료될 예정임을 의미함" />
    </element>
    <element id="Composition.event.detail.identifier.assigner">
      <path value="Composition.event.detail.identifier.assigner" />
      <short value="식별자(identifier)를 발급한 조직(단순 텍스트 기입 가능)" />
      <definition value="식별자(identifier)를 발급/관리하는 조직(organization)" />
    </element>
    <element id="Composition.event.detail.display">
      <path value="Composition.event.detail.display" />
      <short value="해당 리소스(resource)에 대한 대체 텍스트(alternative text)" />
      <definition value="리소스(resource) 참조 외에도 리소스(resource)를 식별하기 위한 일반 텍스트 설명임." />
    </element>
    <element id="Composition.section">
      <path value="Composition.section" />
      <short value="구성요소(composition)의 부문 (section)" />
      <definition value="구성요소(composition)를 구성하는 부문 (section)의 경로 (root)를 의미함." />
    </element>
    <element id="Composition.section.id">
      <path value="Composition.section.id" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
    </element>
    <element id="Composition.section.title">
      <path value="Composition.section.title" />
      <short value="부문(section) 라벨" />
      <definition value="특정 부문(section)의 라벨(label)을 나나탬. 문서에 제시되어 있는 컨텐츠의 일부로 목차를 만드는데 사용됨." />
      <comment value="제목은 사람을 위해 섹션의 식별자로 section.content의 리소스의 서술내용과 일치해야 함. 보통 섹션은 제목이 있어야 하지만 일부 문서에는 불필요하거나 부적절한데 일반적으로 적절하게 구분되는 제목을 가진 하위섹션을 가진 섹션 또는 단일 섹션만 가진 문서 경우이다. 대부분의 구현지침서는 섹션 제목을 필수요소로 하고있음." />
    </element>
    <element id="Composition.section.code">
      <path value="Composition.section.code" />
      <short value="부문(section) 분류 (권장)" />
      <definition value="부문(section) 내에 포함된 컨텐츠의 유형을 식별하는 코드로 부문 제목과 일치 해야 함." />
      <comment value="코드는 문서의 자동화 프로세서 부분에 대한 섹션을 식별함. 이는 프로파일을 사용하여 문서의 구조를 제어할 때 관련이 있음. 섹션에 (하위섹션 대신) 내용(content)가 있을 경우, section.code는 섹션의 내용인 리소스의 의미나 해석을 바꾸지 않음" />
    </element>
    <element id="Composition.section.code.id">
      <path value="Composition.section.code.id" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
    </element>
    <element id="Composition.section.code.coding">
      <path value="Composition.section.code.coding" />
      <short value="용어체계(terminology system)에 의해 정의된 코드(code)" />
      <definition value="용어체계(terminology system)에 의해 정의된 코드(code) 참조" />
    </element>
    <element id="Composition.section.code.coding.id">
      <path value="Composition.section.code.coding.id" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
    </element>
    <element id="Composition.section.code.coding.system">
      <path value="Composition.section.code.coding.system" />
      <short value="용어체계 식별(Identity of terminology system)" />
      <definition value="코드(code)에서 기호(symbol)의 의미를 정의하는 CodeSystem[]를 식별" />
    </element>
    <element id="Composition.section.code.coding.version">
      <path value="Composition.section.code.coding.version" />
      <short value="해당 시스템의 버전 정보 - 필요한 경우" />
      <definition value="해당 코드(code)를 선택한 시점에 사용된 CodeSystem[]의 버전임. 올바로 관리된 CodeSystem[]은 코드(code)의 의미가 버전과 관계없이 일관적이므로 버전을 보고할 필요가 없음. 그러나 CodeSystem[]의 관리 상태는 지속적으로 보장할 수 없는 부분이며, 코드(code)의 의미가 일관적임을 보장할 수 없는 경우 버전이 교체되어야 함." />
    </element>
    <element id="Composition.section.code.coding.code">
      <path value="Composition.section.code.coding.code" />
      <short value="시스템에 정의된 구문(syntax)의 기호(symbol)" />
      <definition value="시스템에 정의된 구문(syntax)의 기호(symbol). 기호(symbol)은 CodeSystem[]에 의해 정의된 구문에서 미리 정의된 코드(code) 또는 표현(expression)일 수 있음. (예: post-coordination)" />
    </element>
    <element id="Composition.section.code.coding.display">
      <path value="Composition.section.code.coding.display" />
      <short value="시스템에 정의된 표기(representation)" />
      <definition value="시스템의 규칙(rules)에 따른, 시스템에서 코드(code)의 의미 표기(representation)" />
    </element>
    <element id="Composition.section.code.coding.userSelected">
      <path value="Composition.section.code.coding.userSelected" />
      <short value="해당 코딩(coding)이 사용자(user)에 의해 직접(directly) 선택되었는지 여부" />
      <definition value="해당 코딩(coding)이 사용자(user)에 의해 직접 선택되었음을 나타냄 - (예) 사용가능한 항목(item)의 선택 목록(list) 중 하나 (코드 또는 디스플레이 )" />
    </element>
    <element id="Composition.section.code.text">
      <path value="Composition.section.code.text" />
      <short value="개념(concept)에 대한 일반 텍스트 표현 (plain text representation)" />
      <definition value="데이터를 입력한 사용자(user)의 입장에서 보거나(seen)/선택하거나(selected)/언급한대로(uttered)의 개념(concept), 혹은 사용자(user)가 의도한 의미를 사람이 사용하는 언어로 표현한 것임." />
    </element>
    <element id="Composition.section.author">
      <path value="Composition.section.author" />
      <short value="누가 그리고 무슨 부문(section)을 작성했는지" />
      <definition value="이 섹션에 대해 입력한 사람이 아닌 해당 정보에 대한 책임자를 식별함" />
      <comment value="참조(reference)는 실제 FHIR 리소스(resource)에 대한 참조(reference)여야 하며, 해결이 가능해야 함 (접근 제어 허용, 일시적인 사용 불가능 등). 해결 방법은 URL에서 검색하거나, 리소스 타입(resource type)별로 적용할 수 있는 경우 절대 참조를 표준(Canonical) URL로 간주하고 로컬 레지스트리/저장소에서 검색하여 확인할 수 있음." />
    </element>
    <element id="Composition.section.author.id">
      <path value="Composition.section.author.id" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
    </element>
    <element id="Composition.section.author.reference">
      <path value="Composition.section.author.reference" />
      <short value="문자로 표현된(literal) 참조, 상대적, 내부적 혹은 절대적인 URL" />
      <definition value="다른 리소스(resource)를 찾을 수 있는 위치에 대한 참조를 의미함. 해당 참조는 service base URL에 상대적인(relative) 경우 상대적 참조, 혹은 해당 리소스(resource)를 찾을 수 있는 위치인 절대(absolute) URL일 수 있음. 해당 참조는 버전에 따라 다를 수 있음. 해당 참조가 FHIR RESTful 서버가 아닌 경우, 버전에 따라 다른 것으로 간주함. 내부 구문(Internal Fragment) 참조('#'으로 시작)는 포함되어 있는 리소스(resource)를 참조함." />
    </element>
    <element id="Composition.section.author.type">
      <path value="Composition.section.author.type" />
      <short value="참조(reference)가 참조(refer)하는 유형(type)  (예. &quot;Patient&quot;)" />
      <definition value="참조 대상의 예상 형식(expected type).  Reference.type과 Reference.reference가 모두 채워지고 Reference.reference가 FHIR URL이면 두가지 모두 일치해야함. 유형(type)은이 참조가 참조하는 유형(type) 인 리소스(resource) 정의의 표준(Canonical) URL임. 참조는 http://hl7.org/fhir/StructureDefinition/과 관련된 URL임. (예) &quot; 환자 &quot; http://hl7.org/fhir/StructureDefinition/Patient에 대한 참조. 절대(absolute) URL은 논리 모델에만 허용됨 (리소스(resource)가 아닌 논리 모델의 참조에서만 사용할 수 있음)." />
    </element>
    <element id="Composition.section.author.identifier">
      <path value="Composition.section.author.identifier" />
      <short value="문자로 표현된(literal) 참조를 알 수 없는 경우 사용하는, 논리적(logical) 참조" />
      <definition value="대상 리소스(resource)의 식별자(identifier). 이것은 다른 리소스(resource)를 직접 참조할 방법이 없을 때 사용- 해당 엔티티(entity)가 FHIR 서버를 통해 사용할 수 없거나  리소스(resource) 작성자가 알려진 식별자(identifier)를 실제 위치로 변활할 방법이 없기 때문에 이 방법이 사용됨. Reference.identifier가 실제로 FHIR 인스턴스로 노출되는 것을 가리킬(point) 필요는 없지만, FHIR 인스턴스로 노출될 것으로 예상되는 비즈니스 개념(concept)을 가리켜야하며, 해당 인스턴스는 참조가 허용되는 FHIR 리소스 타입(resource type)이여야 함." />
    </element>
    <element id="Composition.section.author.identifier.id">
      <path value="Composition.section.author.identifier.id" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
    </element>
    <element id="Composition.section.author.identifier.use">
      <path value="Composition.section.author.identifier.use" />
      <short value="usual | official | temp | secondary | old (If known)" />
      <definition value="해당 식별자(identifier)의 목적" />
    </element>
    <element id="Composition.section.author.identifier.type">
      <path value="Composition.section.author.identifier.type" />
      <short value="식별자(identifier)에 대한 설명" />
      <definition value="특정 목적으로 사용되는 식별자(identifier)를 결정하기 위해 사용하는 식별자(identifier)의 코드화된(coded) 유형(type)을 나타냄." />
    </element>
    <element id="Composition.section.author.identifier.type.id">
      <path value="Composition.section.author.identifier.type.id" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
    </element>
    <element id="Composition.section.author.identifier.type.coding">
      <path value="Composition.section.author.identifier.type.coding" />
      <short value="용어체계(terminology system)에 의해 정의된 코드(code)" />
      <definition value="용어체계(terminology system)에 의해 정의된 코드(code) 참조" />
    </element>
    <element id="Composition.section.author.identifier.type.coding.id">
      <path value="Composition.section.author.identifier.type.coding.id" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
    </element>
    <element id="Composition.section.author.identifier.type.coding.system">
      <path value="Composition.section.author.identifier.type.coding.system" />
      <short value="용어체계 식별(Identity of terminology system)" />
      <definition value="코드(code)에서 기호(symbol)의 의미를 정의하는 CodeSystem[]를 식별" />
    </element>
    <element id="Composition.section.author.identifier.type.coding.version">
      <path value="Composition.section.author.identifier.type.coding.version" />
      <short value="해당 시스템의 버전 정보 - 필요한 경우" />
      <definition value="해당 코드(code)를 선택한 시점에 사용된 CodeSystem[]의 버전임. 올바로 관리된 CodeSystem[]은 코드(code)의 의미가 버전과 관계없이 일관적이므로 버전을 보고할 필요가 없음. 그러나 CodeSystem[]의 관리 상태는 지속적으로 보장할 수 없는 부분이며, 코드(code)의 의미가 일관적임을 보장할 수 없는 경우 버전이 교체되어야 함." />
    </element>
    <element id="Composition.section.author.identifier.type.coding.code">
      <path value="Composition.section.author.identifier.type.coding.code" />
      <short value="시스템에 정의된 구문(syntax)의 기호(symbol)" />
      <definition value="시스템에 정의된 구문(syntax)의 기호(symbol). 기호(symbol)은 CodeSystem[]에 의해 정의된 구문에서 미리 정의된 코드(code) 또는 표현(expression)일 수 있음. (예: post-coordination)" />
    </element>
    <element id="Composition.section.author.identifier.type.coding.display">
      <path value="Composition.section.author.identifier.type.coding.display" />
      <short value="시스템에 정의된 표기(representation)" />
      <definition value="시스템의 규칙(rules)에 따른, 시스템에서 코드(code)의 의미 표기(representation)" />
    </element>
    <element id="Composition.section.author.identifier.type.coding.userSelected">
      <path value="Composition.section.author.identifier.type.coding.userSelected" />
      <short value="해당 코딩(coding)이 사용자(user)에 의해 직접(directly) 선택되었는지 여부" />
      <definition value="해당 코딩(coding)이 사용자(user)에 의해 직접 선택되었음을 나타냄 - (예) 사용가능한 항목(item)의 선택 목록(list) 중 하나 (코드 또는 디스플레이 )" />
    </element>
    <element id="Composition.section.author.identifier.type.text">
      <path value="Composition.section.author.identifier.type.text" />
      <short value="개념(concept)에 대한 일반 텍스트 표현 (plain text representation)" />
      <definition value="데이터를 입력한 사용자(user)의 입장에서 보거나(seen)/선택하거나(selected)/언급한대로(uttered)의 개념(concept), 혹은 사용자(user)가 의도한 의미를 사람이 사용하는 언어로 표현한 것임." />
    </element>
    <element id="Composition.section.author.identifier.system">
      <path value="Composition.section.author.identifier.system" />
      <short value="식별자(identifier) 값의 네임스페이스(namespace)" />
      <definition value="설정 값에 대한 네임스페이스 (namespace), 즉 고유(unique)한 설정값을 설명하는 URL을 설정함." />
    </element>
    <element id="Composition.section.author.identifier.value">
      <path value="Composition.section.author.identifier.value" />
      <short value="고유(unique)한 값(value)" />
      <definition value="일반적으로 사용자(user)와 관련(relevant)이 있으며, 시스템 컨텍스트(context) 내에서 고유(unique)한 식별자(identifier)의 일부분임." />
    </element>
    <element id="Composition.section.author.identifier.period">
      <path value="Composition.section.author.identifier.period" />
      <short value="식별자(identifier)의 유효 기간" />
      <definition value="식별자(identifier)가 사용 가능했거나 가능한 기간을 나타냄." />
    </element>
    <element id="Composition.section.author.identifier.period.id">
      <path value="Composition.section.author.identifier.period.id" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
    </element>
    <element id="Composition.section.author.identifier.period.start">
      <path value="Composition.section.author.identifier.period.start" />
      <short value="해당 유효 기간의 시작 시점 (설정된 날짜 포함)" />
      <definition value="해당 유효 기간이 시작되는 시점을 나타냄. 유효 기간은 시작 시점으로 설정된 날짜를 포함함." />
    </element>
    <element id="Composition.section.author.identifier.period.end">
      <path value="Composition.section.author.identifier.period.end" />
      <short value="해당 유효 기간의 종료 시점 (설정된 날짜 포함)" />
      <definition value="기간의 종료. 기간의 종료가 누락된 경우, 인스턴스가 생성될 때 끝이 알려지거나 계획되지 않았음을 의미함. 시작일은 과거일 수 있고 종료일은 미래일 수 있음. 이는 해당 기간이 해당 시간에 종료될 예정임을 의미함" />
    </element>
    <element id="Composition.section.author.identifier.assigner">
      <path value="Composition.section.author.identifier.assigner" />
      <short value="식별자(identifier)를 발급한 조직(단순 텍스트 기입 가능)" />
      <definition value="식별자(identifier)를 발급/관리하는 조직(organization)" />
    </element>
    <element id="Composition.section.author.display">
      <path value="Composition.section.author.display" />
      <short value="해당 리소스(resource)에 대한 대체 텍스트(alternative text)" />
      <definition value="리소스(resource) 참조 외에도 리소스(resource)를 식별하기 위한 일반 텍스트 설명임." />
    </element>
    <element id="Composition.section.focus">
      <path value="Composition.section.focus" />
      <short value="Composition[]의 주제에 관한 것 아닐 때, 섹션이 누구/무엇에 관한 것인지에 관한 내용" />
      <definition value="Composition[]의 대상은 아니면서, (환자 대상의 경우) 배우자, 부모, 태아 또는 기증자와 같이 주제와 관련된 어떤것 또는 누군가를 나타낼 때 섹션의 실제 초점을 나타냄. focus항목이 지정되지 않을경우, focus는 parent 섹션의 focus 또는 Composition[] 자신을 대상으로 함. focus를 포함한 섹션은 논리적 subject(환자, 환자, 주제, 포커스 등)가 섹션 focus와 일치하는 리소스 또는 논리적 subject(일부 리소스)가 없는 리소스를 포함해야 함." />
      <comment value="보통 문서의 섹션은 document의 환자, 환자그룹, 위치, 또는 기기(device) 등의 문서주제에 관련된 것임. 어떤 문서는 실제로 엔터티에 관련한 데이터가 포함되어 있음. 전형적인 예로, 산모와 관련된 신생아 퇴원 요약서 또는 가족구성원이 포함된 가족력 문서 등 많은 예가 있음" />
    </element>
    <element id="Composition.section.focus.id">
      <path value="Composition.section.focus.id" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
    </element>
    <element id="Composition.section.focus.reference">
      <path value="Composition.section.focus.reference" />
      <short value="문자로 표현된(literal) 참조, 상대적, 내부적 혹은 절대적인 URL" />
      <definition value="다른 리소스(resource)를 찾을 수 있는 위치에 대한 참조를 의미함. 해당 참조는 service base URL에 상대적인(relative) 경우 상대적 참조, 혹은 해당 리소스(resource)를 찾을 수 있는 위치인 절대(absolute) URL일 수 있음. 해당 참조는 버전에 따라 다를 수 있음. 해당 참조가 FHIR RESTful 서버가 아닌 경우, 버전에 따라 다른 것으로 간주함. 내부 구문(Internal Fragment) 참조('#'으로 시작)는 포함되어 있는 리소스(resource)를 참조함." />
    </element>
    <element id="Composition.section.focus.type">
      <path value="Composition.section.focus.type" />
      <short value="참조(reference)가 참조(refer)하는 유형(type)  (예. &quot;Patient&quot;)" />
      <definition value="참조 대상의 예상 형식(expected type).  Reference.type과 Reference.reference가 모두 채워지고 Reference.reference가 FHIR URL이면 두가지 모두 일치해야함. 유형(type)은이 참조가 참조하는 유형(type) 인 리소스(resource) 정의의 표준(Canonical) URL임. 참조는 http://hl7.org/fhir/StructureDefinition/과 관련된 URL임. (예) &quot; 환자 &quot; http://hl7.org/fhir/StructureDefinition/Patient에 대한 참조. 절대(absolute) URL은 논리 모델에만 허용됨 (리소스(resource)가 아닌 논리 모델의 참조에서만 사용할 수 있음)." />
    </element>
    <element id="Composition.section.focus.identifier">
      <path value="Composition.section.focus.identifier" />
      <short value="문자로 표현된(literal) 참조를 알 수 없는 경우 사용하는, 논리적(logical) 참조" />
      <definition value="대상 리소스(resource)의 식별자(identifier). 이것은 다른 리소스(resource)를 직접 참조할 방법이 없을 때 사용- 해당 엔티티(entity)가 FHIR 서버를 통해 사용할 수 없거나  리소스(resource) 작성자가 알려진 식별자(identifier)를 실제 위치로 변활할 방법이 없기 때문에 이 방법이 사용됨. Reference.identifier가 실제로 FHIR 인스턴스로 노출되는 것을 가리킬(point) 필요는 없지만, FHIR 인스턴스로 노출될 것으로 예상되는 비즈니스 개념(concept)을 가리켜야하며, 해당 인스턴스는 참조가 허용되는 FHIR 리소스 타입(resource type)이여야 함." />
    </element>
    <element id="Composition.section.focus.identifier.id">
      <path value="Composition.section.focus.identifier.id" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
    </element>
    <element id="Composition.section.focus.identifier.use">
      <path value="Composition.section.focus.identifier.use" />
      <short value="usual | official | temp | secondary | old (If known)" />
      <definition value="해당 식별자(identifier)의 목적" />
    </element>
    <element id="Composition.section.focus.identifier.type">
      <path value="Composition.section.focus.identifier.type" />
      <short value="식별자(identifier)에 대한 설명" />
      <definition value="특정 목적으로 사용되는 식별자(identifier)를 결정하기 위해 사용하는 식별자(identifier)의 코드화된(coded) 유형(type)을 나타냄." />
    </element>
    <element id="Composition.section.focus.identifier.type.id">
      <path value="Composition.section.focus.identifier.type.id" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
    </element>
    <element id="Composition.section.focus.identifier.type.coding">
      <path value="Composition.section.focus.identifier.type.coding" />
      <short value="용어체계(terminology system)에 의해 정의된 코드(code)" />
      <definition value="용어체계(terminology system)에 의해 정의된 코드(code) 참조" />
    </element>
    <element id="Composition.section.focus.identifier.type.coding.id">
      <path value="Composition.section.focus.identifier.type.coding.id" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
    </element>
    <element id="Composition.section.focus.identifier.type.coding.system">
      <path value="Composition.section.focus.identifier.type.coding.system" />
      <short value="용어체계 식별(Identity of terminology system)" />
      <definition value="코드(code)에서 기호(symbol)의 의미를 정의하는 CodeSystem[]를 식별" />
    </element>
    <element id="Composition.section.focus.identifier.type.coding.version">
      <path value="Composition.section.focus.identifier.type.coding.version" />
      <short value="해당 시스템의 버전 정보 - 필요한 경우" />
      <definition value="해당 코드(code)를 선택한 시점에 사용된 CodeSystem[]의 버전임. 올바로 관리된 CodeSystem[]은 코드(code)의 의미가 버전과 관계없이 일관적이므로 버전을 보고할 필요가 없음. 그러나 CodeSystem[]의 관리 상태는 지속적으로 보장할 수 없는 부분이며, 코드(code)의 의미가 일관적임을 보장할 수 없는 경우 버전이 교체되어야 함." />
    </element>
    <element id="Composition.section.focus.identifier.type.coding.code">
      <path value="Composition.section.focus.identifier.type.coding.code" />
      <short value="시스템에 정의된 구문(syntax)의 기호(symbol)" />
      <definition value="시스템에 정의된 구문(syntax)의 기호(symbol). 기호(symbol)은 CodeSystem[]에 의해 정의된 구문에서 미리 정의된 코드(code) 또는 표현(expression)일 수 있음. (예: post-coordination)" />
    </element>
    <element id="Composition.section.focus.identifier.type.coding.display">
      <path value="Composition.section.focus.identifier.type.coding.display" />
      <short value="시스템에 정의된 표기(representation)" />
      <definition value="시스템의 규칙(rules)에 따른, 시스템에서 코드(code)의 의미 표기(representation)" />
    </element>
    <element id="Composition.section.focus.identifier.type.coding.userSelected">
      <path value="Composition.section.focus.identifier.type.coding.userSelected" />
      <short value="해당 코딩(coding)이 사용자(user)에 의해 직접(directly) 선택되었는지 여부" />
      <definition value="해당 코딩(coding)이 사용자(user)에 의해 직접 선택되었음을 나타냄 - (예) 사용가능한 항목(item)의 선택 목록(list) 중 하나 (코드 또는 디스플레이 )" />
    </element>
    <element id="Composition.section.focus.identifier.type.text">
      <path value="Composition.section.focus.identifier.type.text" />
      <short value="개념(concept)에 대한 일반 텍스트 표현 (plain text representation)" />
      <definition value="데이터를 입력한 사용자(user)의 입장에서 보거나(seen)/선택하거나(selected)/언급한대로(uttered)의 개념(concept), 혹은 사용자(user)가 의도한 의미를 사람이 사용하는 언어로 표현한 것임." />
    </element>
    <element id="Composition.section.focus.identifier.system">
      <path value="Composition.section.focus.identifier.system" />
      <short value="식별자(identifier) 값의 네임스페이스(namespace)" />
      <definition value="설정 값에 대한 네임스페이스 (namespace), 즉 고유(unique)한 설정값을 설명하는 URL을 설정함." />
    </element>
    <element id="Composition.section.focus.identifier.value">
      <path value="Composition.section.focus.identifier.value" />
      <short value="고유(unique)한 값(value)" />
      <definition value="일반적으로 사용자(user)와 관련(relevant)이 있으며, 시스템 컨텍스트(context) 내에서 고유(unique)한 식별자(identifier)의 일부분임." />
    </element>
    <element id="Composition.section.focus.identifier.period">
      <path value="Composition.section.focus.identifier.period" />
      <short value="식별자(identifier)의 유효 기간" />
      <definition value="식별자(identifier)가 사용 가능했거나 가능한 기간을 나타냄." />
    </element>
    <element id="Composition.section.focus.identifier.period.id">
      <path value="Composition.section.focus.identifier.period.id" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
    </element>
    <element id="Composition.section.focus.identifier.period.start">
      <path value="Composition.section.focus.identifier.period.start" />
      <short value="해당 유효 기간의 시작 시점 (설정된 날짜 포함)" />
      <definition value="해당 유효 기간이 시작되는 시점을 나타냄. 유효 기간은 시작 시점으로 설정된 날짜를 포함함." />
    </element>
    <element id="Composition.section.focus.identifier.period.end">
      <path value="Composition.section.focus.identifier.period.end" />
      <short value="해당 유효 기간의 종료 시점 (설정된 날짜 포함)" />
      <definition value="기간의 종료. 기간의 종료가 누락된 경우, 인스턴스가 생성될 때 끝이 알려지거나 계획되지 않았음을 의미함. 시작일은 과거일 수 있고 종료일은 미래일 수 있음. 이는 해당 기간이 해당 시간에 종료될 예정임을 의미함" />
    </element>
    <element id="Composition.section.focus.identifier.assigner">
      <path value="Composition.section.focus.identifier.assigner" />
      <short value="식별자(identifier)를 발급한 조직(단순 텍스트 기입 가능)" />
      <definition value="식별자(identifier)를 발급/관리하는 조직(organization)" />
    </element>
    <element id="Composition.section.focus.display">
      <path value="Composition.section.focus.display" />
      <short value="해당 리소스(resource)에 대한 대체 텍스트(alternative text)" />
      <definition value="리소스(resource) 참조 외에도 리소스(resource)를 식별하기 위한 일반 텍스트 설명임." />
    </element>
    <element id="Composition.section.text">
      <path value="Composition.section.text" />
      <short value="부문(section)의 내용 요약" />
      <definition value="읽는 사람이 리소스의 내용을 알 수 있도록 되어있는 설명을 의미하며, 부문 (section)의 컨텐츠를 포함하고 있음. 해당 설명 내에 구조화된 데이터를 모두 인코딩할 필요는 없지만, &quot;임상적으로 안전&quot; 하도록 세부사항을 충분히 포함해야 함." />
      <comment value="문서 프로파일에는 임상안전보장을 위해 설명문(narrative)에서 어떤 콘텐츠가 담겨야 하는지 정의할수 있음" />
    </element>
    <element id="Composition.section.text.id">
      <path value="Composition.section.text.id" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
    </element>
    <element id="Composition.section.text.status">
      <path value="Composition.section.text.status" />
      <short value="generated | extensions | additional | empty" />
      <definition value="설명의 상태. 자동으로 생성 되었는지, 사람에 의해 수동적으로 생성되었는지, 데이터 추가가 가능한지 여부를 나타냄." />
    </element>
    <element id="Composition.section.text.div">
      <path value="Composition.section.text.div" />
      <short value="제한된 XHTML 컨텐츠(content)" />
      <definition value="설명의 실제 컨텐츠(content). 가장 기본적인 XHTML 버전임." />
    </element>
    <element id="Composition.section.mode">
      <path value="Composition.section.mode" />
      <short value="working | snapshot | changes" />
      <definition value="항목 목록(entry litst)이 어떻게 준비되었는지를 나타냄. 유지 관리하기에 적합한 작업 목록인지, 다른 소스로 부터 얻어진 항목의 스냅샷인지, 혹은 항목이 추가, 수정, 삭제 된 것으로 표시 될 수 있는지의 여부를 의미함." />
      <comment value="변경목록이 전체목록으로 오해되지 않도록 해야하기 때문에 이 요소는 modifier(수정자)로 표시(labeling)됨" />
    </element>
    <element id="Composition.section.orderedBy">
      <path value="Composition.section.orderedBy" />
      <short value="부문 (section) 내의 항목(entry)의 순서" />
      <definition value="항목(entry)들이 적용되는 순서를 지정함" />
      <comment value="응용프로그램은 제공된 순서대로 목록을 정렬하지만, 사용자는 설정을 통해 정렬순서를 바꿀 수 있음. 순서를 지정하지 않으면 어떤식으로 정렬 되는지 알수 없음" />
    </element>
    <element id="Composition.section.orderedBy.id">
      <path value="Composition.section.orderedBy.id" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
    </element>
    <element id="Composition.section.orderedBy.coding">
      <path value="Composition.section.orderedBy.coding" />
      <short value="용어체계(terminology system)에 의해 정의된 코드(code)" />
      <definition value="용어체계(terminology system)에 의해 정의된 코드(code) 참조" />
    </element>
    <element id="Composition.section.orderedBy.coding.id">
      <path value="Composition.section.orderedBy.coding.id" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
    </element>
    <element id="Composition.section.orderedBy.coding.system">
      <path value="Composition.section.orderedBy.coding.system" />
      <short value="용어체계 식별(Identity of terminology system)" />
      <definition value="코드(code)에서 기호(symbol)의 의미를 정의하는 CodeSystem[]를 식별" />
    </element>
    <element id="Composition.section.orderedBy.coding.version">
      <path value="Composition.section.orderedBy.coding.version" />
      <short value="해당 시스템의 버전 정보 - 필요한 경우" />
      <definition value="해당 코드(code)를 선택한 시점에 사용된 CodeSystem[]의 버전임. 올바로 관리된 CodeSystem[]은 코드(code)의 의미가 버전과 관계없이 일관적이므로 버전을 보고할 필요가 없음. 그러나 CodeSystem[]의 관리 상태는 지속적으로 보장할 수 없는 부분이며, 코드(code)의 의미가 일관적임을 보장할 수 없는 경우 버전이 교체되어야 함." />
    </element>
    <element id="Composition.section.orderedBy.coding.code">
      <path value="Composition.section.orderedBy.coding.code" />
      <short value="시스템에 정의된 구문(syntax)의 기호(symbol)" />
      <definition value="시스템에 정의된 구문(syntax)의 기호(symbol). 기호(symbol)은 CodeSystem[]에 의해 정의된 구문에서 미리 정의된 코드(code) 또는 표현(expression)일 수 있음. (예: post-coordination)" />
    </element>
    <element id="Composition.section.orderedBy.coding.display">
      <path value="Composition.section.orderedBy.coding.display" />
      <short value="시스템에 정의된 표기(representation)" />
      <definition value="시스템의 규칙(rules)에 따른, 시스템에서 코드(code)의 의미 표기(representation)" />
    </element>
    <element id="Composition.section.orderedBy.coding.userSelected">
      <path value="Composition.section.orderedBy.coding.userSelected" />
      <short value="해당 코딩(coding)이 사용자(user)에 의해 직접(directly) 선택되었는지 여부" />
      <definition value="해당 코딩(coding)이 사용자(user)에 의해 직접 선택되었음을 나타냄 - (예) 사용가능한 항목(item)의 선택 목록(list) 중 하나 (코드 또는 디스플레이 )" />
    </element>
    <element id="Composition.section.orderedBy.text">
      <path value="Composition.section.orderedBy.text" />
      <short value="개념(concept)에 대한 일반 텍스트 표현 (plain text representation)" />
      <definition value="데이터를 입력한 사용자(user)의 입장에서 보거나(seen)/선택하거나(selected)/언급한대로(uttered)의 개념(concept), 혹은 사용자(user)가 의도한 의미를 사람이 사용하는 언어로 표현한 것임." />
    </element>
    <element id="Composition.section.entry">
      <path value="Composition.section.entry" />
      <short value="해당 부문(section)을 보조해주는 참조 데이터" />
      <definition value="부문 (section)의 설명이 파생되는 실제 리소스에 대한 참조" />
      <comment value="목록이 리스트에 없는 경우, emptyReason 가 제공되어 야 함" />
    </element>
    <element id="Composition.section.entry.id">
      <path value="Composition.section.entry.id" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
    </element>
    <element id="Composition.section.entry.reference">
      <path value="Composition.section.entry.reference" />
      <short value="문자로 표현된(literal) 참조, 상대적, 내부적 혹은 절대적인 URL" />
      <definition value="다른 리소스(resource)를 찾을 수 있는 위치에 대한 참조를 의미함. 해당 참조는 service base URL에 상대적인(relative) 경우 상대적 참조, 혹은 해당 리소스(resource)를 찾을 수 있는 위치인 절대(absolute) URL일 수 있음. 해당 참조는 버전에 따라 다를 수 있음. 해당 참조가 FHIR RESTful 서버가 아닌 경우, 버전에 따라 다른 것으로 간주함. 내부 구문(Internal Fragment) 참조('#'으로 시작)는 포함되어 있는 리소스(resource)를 참조함." />
    </element>
    <element id="Composition.section.entry.type">
      <path value="Composition.section.entry.type" />
      <short value="참조(reference)가 참조(refer)하는 유형(type)  (예. &quot;Patient&quot;)" />
      <definition value="참조 대상의 예상 형식(expected type).  Reference.type과 Reference.reference가 모두 채워지고 Reference.reference가 FHIR URL이면 두가지 모두 일치해야함. 유형(type)은이 참조가 참조하는 유형(type) 인 리소스(resource) 정의의 표준(Canonical) URL임. 참조는 http://hl7.org/fhir/StructureDefinition/과 관련된 URL임. (예) &quot; 환자 &quot; http://hl7.org/fhir/StructureDefinition/Patient에 대한 참조. 절대(absolute) URL은 논리 모델에만 허용됨 (리소스(resource)가 아닌 논리 모델의 참조에서만 사용할 수 있음)." />
    </element>
    <element id="Composition.section.entry.identifier">
      <path value="Composition.section.entry.identifier" />
      <short value="문자로 표현된(literal) 참조를 알 수 없는 경우 사용하는, 논리적(logical) 참조" />
      <definition value="대상 리소스(resource)의 식별자(identifier). 이것은 다른 리소스(resource)를 직접 참조할 방법이 없을 때 사용- 해당 엔티티(entity)가 FHIR 서버를 통해 사용할 수 없거나  리소스(resource) 작성자가 알려진 식별자(identifier)를 실제 위치로 변활할 방법이 없기 때문에 이 방법이 사용됨. Reference.identifier가 실제로 FHIR 인스턴스로 노출되는 것을 가리킬(point) 필요는 없지만, FHIR 인스턴스로 노출될 것으로 예상되는 비즈니스 개념(concept)을 가리켜야하며, 해당 인스턴스는 참조가 허용되는 FHIR 리소스 타입(resource type)이여야 함." />
    </element>
    <element id="Composition.section.entry.identifier.id">
      <path value="Composition.section.entry.identifier.id" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
    </element>
    <element id="Composition.section.entry.identifier.use">
      <path value="Composition.section.entry.identifier.use" />
      <short value="usual | official | temp | secondary | old (If known)" />
      <definition value="해당 식별자(identifier)의 목적" />
    </element>
    <element id="Composition.section.entry.identifier.type">
      <path value="Composition.section.entry.identifier.type" />
      <short value="식별자(identifier)에 대한 설명" />
      <definition value="특정 목적으로 사용되는 식별자(identifier)를 결정하기 위해 사용하는 식별자(identifier)의 코드화된(coded) 유형(type)을 나타냄." />
    </element>
    <element id="Composition.section.entry.identifier.type.id">
      <path value="Composition.section.entry.identifier.type.id" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
    </element>
    <element id="Composition.section.entry.identifier.type.coding">
      <path value="Composition.section.entry.identifier.type.coding" />
      <short value="용어체계(terminology system)에 의해 정의된 코드(code)" />
      <definition value="용어체계(terminology system)에 의해 정의된 코드(code) 참조" />
    </element>
    <element id="Composition.section.entry.identifier.type.coding.id">
      <path value="Composition.section.entry.identifier.type.coding.id" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
    </element>
    <element id="Composition.section.entry.identifier.type.coding.system">
      <path value="Composition.section.entry.identifier.type.coding.system" />
      <short value="용어체계 식별(Identity of terminology system)" />
      <definition value="코드(code)에서 기호(symbol)의 의미를 정의하는 CodeSystem[]를 식별" />
    </element>
    <element id="Composition.section.entry.identifier.type.coding.version">
      <path value="Composition.section.entry.identifier.type.coding.version" />
      <short value="해당 시스템의 버전 정보 - 필요한 경우" />
      <definition value="해당 코드(code)를 선택한 시점에 사용된 CodeSystem[]의 버전임. 올바로 관리된 CodeSystem[]은 코드(code)의 의미가 버전과 관계없이 일관적이므로 버전을 보고할 필요가 없음. 그러나 CodeSystem[]의 관리 상태는 지속적으로 보장할 수 없는 부분이며, 코드(code)의 의미가 일관적임을 보장할 수 없는 경우 버전이 교체되어야 함." />
    </element>
    <element id="Composition.section.entry.identifier.type.coding.code">
      <path value="Composition.section.entry.identifier.type.coding.code" />
      <short value="시스템에 정의된 구문(syntax)의 기호(symbol)" />
      <definition value="시스템에 정의된 구문(syntax)의 기호(symbol). 기호(symbol)은 CodeSystem[]에 의해 정의된 구문에서 미리 정의된 코드(code) 또는 표현(expression)일 수 있음. (예: post-coordination)" />
    </element>
    <element id="Composition.section.entry.identifier.type.coding.display">
      <path value="Composition.section.entry.identifier.type.coding.display" />
      <short value="시스템에 정의된 표기(representation)" />
      <definition value="시스템의 규칙(rules)에 따른, 시스템에서 코드(code)의 의미 표기(representation)" />
    </element>
    <element id="Composition.section.entry.identifier.type.coding.userSelected">
      <path value="Composition.section.entry.identifier.type.coding.userSelected" />
      <short value="해당 코딩(coding)이 사용자(user)에 의해 직접(directly) 선택되었는지 여부" />
      <definition value="해당 코딩(coding)이 사용자(user)에 의해 직접 선택되었음을 나타냄 - (예) 사용가능한 항목(item)의 선택 목록(list) 중 하나 (코드 또는 디스플레이 )" />
    </element>
    <element id="Composition.section.entry.identifier.type.text">
      <path value="Composition.section.entry.identifier.type.text" />
      <short value="개념(concept)에 대한 일반 텍스트 표현 (plain text representation)" />
      <definition value="데이터를 입력한 사용자(user)의 입장에서 보거나(seen)/선택하거나(selected)/언급한대로(uttered)의 개념(concept), 혹은 사용자(user)가 의도한 의미를 사람이 사용하는 언어로 표현한 것임." />
    </element>
    <element id="Composition.section.entry.identifier.system">
      <path value="Composition.section.entry.identifier.system" />
      <short value="식별자(identifier) 값의 네임스페이스(namespace)" />
      <definition value="설정 값에 대한 네임스페이스 (namespace), 즉 고유(unique)한 설정값을 설명하는 URL을 설정함." />
    </element>
    <element id="Composition.section.entry.identifier.value">
      <path value="Composition.section.entry.identifier.value" />
      <short value="고유(unique)한 값(value)" />
      <definition value="일반적으로 사용자(user)와 관련(relevant)이 있으며, 시스템 컨텍스트(context) 내에서 고유(unique)한 식별자(identifier)의 일부분임." />
    </element>
    <element id="Composition.section.entry.identifier.period">
      <path value="Composition.section.entry.identifier.period" />
      <short value="식별자(identifier)의 유효 기간" />
      <definition value="식별자(identifier)가 사용 가능했거나 가능한 기간을 나타냄." />
    </element>
    <element id="Composition.section.entry.identifier.period.id">
      <path value="Composition.section.entry.identifier.period.id" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
    </element>
    <element id="Composition.section.entry.identifier.period.start">
      <path value="Composition.section.entry.identifier.period.start" />
      <short value="해당 유효 기간의 시작 시점 (설정된 날짜 포함)" />
      <definition value="해당 유효 기간이 시작되는 시점을 나타냄. 유효 기간은 시작 시점으로 설정된 날짜를 포함함." />
    </element>
    <element id="Composition.section.entry.identifier.period.end">
      <path value="Composition.section.entry.identifier.period.end" />
      <short value="해당 유효 기간의 종료 시점 (설정된 날짜 포함)" />
      <definition value="기간의 종료. 기간의 종료가 누락된 경우, 인스턴스가 생성될 때 끝이 알려지거나 계획되지 않았음을 의미함. 시작일은 과거일 수 있고 종료일은 미래일 수 있음. 이는 해당 기간이 해당 시간에 종료될 예정임을 의미함" />
    </element>
    <element id="Composition.section.entry.identifier.assigner">
      <path value="Composition.section.entry.identifier.assigner" />
      <short value="식별자(identifier)를 발급한 조직(단순 텍스트 기입 가능)" />
      <definition value="식별자(identifier)를 발급/관리하는 조직(organization)" />
    </element>
    <element id="Composition.section.entry.display">
      <path value="Composition.section.entry.display" />
      <short value="해당 리소스(resource)에 대한 대체 텍스트(alternative text)" />
      <definition value="리소스(resource) 참조 외에도 리소스(resource)를 식별하기 위한 일반 텍스트 설명임." />
    </element>
    <element id="Composition.section.emptyReason">
      <path value="Composition.section.emptyReason" />
      <short value="부문(section)이 비어있는 이유" />
      <definition value="부문(section)이 비어있는 경우는 항목이 비어있음. 비어있는 부문은 일반적으로 빈 이유를 설명하는 텍스트가 있음." />
      <comment value="비어있는 섹션에 대해서 다양한 해석이 발생함. 이 code는 전체 섹션 컨텐츠가 폐지되었을 때 사용되며 개별 항목이 생략된 경우는 사용되지 않음. 이를 구현할 때 text note나 플래그(flag) 사용을 고려할 수 있음" />
    </element>
    <element id="Composition.section.emptyReason.id">
      <path value="Composition.section.emptyReason.id" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
    </element>
    <element id="Composition.section.emptyReason.coding">
      <path value="Composition.section.emptyReason.coding" />
      <short value="용어체계(terminology system)에 의해 정의된 코드(code)" />
      <definition value="용어체계(terminology system)에 의해 정의된 코드(code) 참조" />
    </element>
    <element id="Composition.section.emptyReason.coding.id">
      <path value="Composition.section.emptyReason.coding.id" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
    </element>
    <element id="Composition.section.emptyReason.coding.system">
      <path value="Composition.section.emptyReason.coding.system" />
      <short value="용어체계 식별(Identity of terminology system)" />
      <definition value="코드(code)에서 기호(symbol)의 의미를 정의하는 CodeSystem[]를 식별" />
    </element>
    <element id="Composition.section.emptyReason.coding.version">
      <path value="Composition.section.emptyReason.coding.version" />
      <short value="해당 시스템의 버전 정보 - 필요한 경우" />
      <definition value="해당 코드(code)를 선택한 시점에 사용된 CodeSystem[]의 버전임. 올바로 관리된 CodeSystem[]은 코드(code)의 의미가 버전과 관계없이 일관적이므로 버전을 보고할 필요가 없음. 그러나 CodeSystem[]의 관리 상태는 지속적으로 보장할 수 없는 부분이며, 코드(code)의 의미가 일관적임을 보장할 수 없는 경우 버전이 교체되어야 함." />
    </element>
    <element id="Composition.section.emptyReason.coding.code">
      <path value="Composition.section.emptyReason.coding.code" />
      <short value="시스템에 정의된 구문(syntax)의 기호(symbol)" />
      <definition value="시스템에 정의된 구문(syntax)의 기호(symbol). 기호(symbol)은 CodeSystem[]에 의해 정의된 구문에서 미리 정의된 코드(code) 또는 표현(expression)일 수 있음. (예: post-coordination)" />
    </element>
    <element id="Composition.section.emptyReason.coding.display">
      <path value="Composition.section.emptyReason.coding.display" />
      <short value="시스템에 정의된 표기(representation)" />
      <definition value="시스템의 규칙(rules)에 따른, 시스템에서 코드(code)의 의미 표기(representation)" />
    </element>
    <element id="Composition.section.emptyReason.coding.userSelected">
      <path value="Composition.section.emptyReason.coding.userSelected" />
      <short value="해당 코딩(coding)이 사용자(user)에 의해 직접(directly) 선택되었는지 여부" />
      <definition value="해당 코딩(coding)이 사용자(user)에 의해 직접 선택되었음을 나타냄 - (예) 사용가능한 항목(item)의 선택 목록(list) 중 하나 (코드 또는 디스플레이 )" />
    </element>
    <element id="Composition.section.emptyReason.text">
      <path value="Composition.section.emptyReason.text" />
      <short value="개념(concept)에 대한 일반 텍스트 표현 (plain text representation)" />
      <definition value="데이터를 입력한 사용자(user)의 입장에서 보거나(seen)/선택하거나(selected)/언급한대로(uttered)의 개념(concept), 혹은 사용자(user)가 의도한 의미를 사람이 사용하는 언어로 표현한 것임." />
    </element>
    <element id="Composition.section.section">
      <path value="Composition.section.section" />
      <short value="중첩된 부문(section)" />
      <definition value="해당 섹션 내에 중첩된 하위-부문(sub-section)" />
      <comment value="중첩 섹션은 읽는사람(reader)이 문서의 특정 부분으로 이동하는 데 주로 사용됨" />
    </element>
    <element id="Composition.section.section.id">
      <path value="Composition.section.section.id" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
    </element>
    <element id="Composition.section.section.title">
      <path value="Composition.section.section.title" />
      <short value="부문(section) 라벨" />
      <definition value="특정 부문(section)의 라벨(label)을 나나탬. 문서에 제시되어 있는 컨텐츠의 일부로 목차를 만드는데 사용됨." />
    </element>
    <element id="Composition.section.section.code">
      <path value="Composition.section.section.code" />
      <short value="부문(section) 분류 (권장)" />
      <definition value="부문(section) 내에 포함된 컨텐츠의 유형을 식별하는 코드로 부문 제목과 일치 해야 함." />
    </element>
    <element id="Composition.section.section.code.id">
      <path value="Composition.section.section.code.id" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
    </element>
    <element id="Composition.section.section.code.coding">
      <path value="Composition.section.section.code.coding" />
      <short value="용어체계(terminology system)에 의해 정의된 코드(code)" />
      <definition value="용어체계(terminology system)에 의해 정의된 코드(code) 참조" />
    </element>
    <element id="Composition.section.section.code.coding.id">
      <path value="Composition.section.section.code.coding.id" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
    </element>
    <element id="Composition.section.section.code.coding.system">
      <path value="Composition.section.section.code.coding.system" />
      <short value="용어체계 식별(Identity of terminology system)" />
      <definition value="코드(code)에서 기호(symbol)의 의미를 정의하는 CodeSystem[]를 식별" />
    </element>
    <element id="Composition.section.section.code.coding.version">
      <path value="Composition.section.section.code.coding.version" />
      <short value="해당 시스템의 버전 정보 - 필요한 경우" />
      <definition value="해당 코드(code)를 선택한 시점에 사용된 CodeSystem[]의 버전임. 올바로 관리된 CodeSystem[]은 코드(code)의 의미가 버전과 관계없이 일관적이므로 버전을 보고할 필요가 없음. 그러나 CodeSystem[]의 관리 상태는 지속적으로 보장할 수 없는 부분이며, 코드(code)의 의미가 일관적임을 보장할 수 없는 경우 버전이 교체되어야 함." />
    </element>
    <element id="Composition.section.section.code.coding.code">
      <path value="Composition.section.section.code.coding.code" />
      <short value="시스템에 정의된 구문(syntax)의 기호(symbol)" />
      <definition value="시스템에 정의된 구문(syntax)의 기호(symbol). 기호(symbol)은 CodeSystem[]에 의해 정의된 구문에서 미리 정의된 코드(code) 또는 표현(expression)일 수 있음. (예: post-coordination)" />
    </element>
    <element id="Composition.section.section.code.coding.display">
      <path value="Composition.section.section.code.coding.display" />
      <short value="시스템에 정의된 표기(representation)" />
      <definition value="시스템의 규칙(rules)에 따른, 시스템에서 코드(code)의 의미 표기(representation)" />
    </element>
    <element id="Composition.section.section.code.coding.userSelected">
      <path value="Composition.section.section.code.coding.userSelected" />
      <short value="해당 코딩(coding)이 사용자(user)에 의해 직접(directly) 선택되었는지 여부" />
      <definition value="해당 코딩(coding)이 사용자(user)에 의해 직접 선택되었음을 나타냄 - (예) 사용가능한 항목(item)의 선택 목록(list) 중 하나 (코드 또는 디스플레이 )" />
    </element>
    <element id="Composition.section.section.code.text">
      <path value="Composition.section.section.code.text" />
      <short value="개념(concept)에 대한 일반 텍스트 표현 (plain text representation)" />
      <definition value="데이터를 입력한 사용자(user)의 입장에서 보거나(seen)/선택하거나(selected)/언급한대로(uttered)의 개념(concept), 혹은 사용자(user)가 의도한 의미를 사람이 사용하는 언어로 표현한 것임." />
    </element>
    <element id="Composition.section.section.author">
      <path value="Composition.section.section.author" />
      <short value="누가 그리고 무슨 부문(section)을 작성했는지" />
      <definition value="이 섹션에 대해 입력한 사람이 아닌 해당 정보에 대한 책임자를 식별함" />
    </element>
    <element id="Composition.section.section.author.id">
      <path value="Composition.section.section.author.id" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
    </element>
    <element id="Composition.section.section.author.reference">
      <path value="Composition.section.section.author.reference" />
      <short value="문자로 표현된(literal) 참조, 상대적, 내부적 혹은 절대적인 URL" />
      <definition value="다른 리소스(resource)를 찾을 수 있는 위치에 대한 참조를 의미함. 해당 참조는 service base URL에 상대적인(relative) 경우 상대적 참조, 혹은 해당 리소스(resource)를 찾을 수 있는 위치인 절대(absolute) URL일 수 있음. 해당 참조는 버전에 따라 다를 수 있음. 해당 참조가 FHIR RESTful 서버가 아닌 경우, 버전에 따라 다른 것으로 간주함. 내부 구문(Internal Fragment) 참조('#'으로 시작)는 포함되어 있는 리소스(resource)를 참조함." />
    </element>
    <element id="Composition.section.section.author.type">
      <path value="Composition.section.section.author.type" />
      <short value="참조(reference)가 참조(refer)하는 유형(type)  (예. &quot;Patient&quot;)" />
      <definition value="참조 대상의 예상 형식(expected type).  Reference.type과 Reference.reference가 모두 채워지고 Reference.reference가 FHIR URL이면 두가지 모두 일치해야함. 유형(type)은이 참조가 참조하는 유형(type) 인 리소스(resource) 정의의 표준(Canonical) URL임. 참조는 http://hl7.org/fhir/StructureDefinition/과 관련된 URL임. (예) &quot; 환자 &quot; http://hl7.org/fhir/StructureDefinition/Patient에 대한 참조. 절대(absolute) URL은 논리 모델에만 허용됨 (리소스(resource)가 아닌 논리 모델의 참조에서만 사용할 수 있음)." />
    </element>
    <element id="Composition.section.section.author.identifier">
      <path value="Composition.section.section.author.identifier" />
      <short value="문자로 표현된(literal) 참조를 알 수 없는 경우 사용하는, 논리적(logical) 참조" />
      <definition value="대상 리소스(resource)의 식별자(identifier). 이것은 다른 리소스(resource)를 직접 참조할 방법이 없을 때 사용- 해당 엔티티(entity)가 FHIR 서버를 통해 사용할 수 없거나  리소스(resource) 작성자가 알려진 식별자(identifier)를 실제 위치로 변활할 방법이 없기 때문에 이 방법이 사용됨. Reference.identifier가 실제로 FHIR 인스턴스로 노출되는 것을 가리킬(point) 필요는 없지만, FHIR 인스턴스로 노출될 것으로 예상되는 비즈니스 개념(concept)을 가리켜야하며, 해당 인스턴스는 참조가 허용되는 FHIR 리소스 타입(resource type)이여야 함." />
    </element>
    <element id="Composition.section.section.author.identifier.id">
      <path value="Composition.section.section.author.identifier.id" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
    </element>
    <element id="Composition.section.section.author.identifier.use">
      <path value="Composition.section.section.author.identifier.use" />
      <short value="usual | official | temp | secondary | old (If known)" />
      <definition value="해당 식별자(identifier)의 목적" />
    </element>
    <element id="Composition.section.section.author.identifier.type">
      <path value="Composition.section.section.author.identifier.type" />
      <short value="식별자(identifier)에 대한 설명" />
      <definition value="특정 목적으로 사용되는 식별자(identifier)를 결정하기 위해 사용하는 식별자(identifier)의 코드화된(coded) 유형(type)을 나타냄." />
    </element>
    <element id="Composition.section.section.author.identifier.type.id">
      <path value="Composition.section.section.author.identifier.type.id" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
    </element>
    <element id="Composition.section.section.author.identifier.type.coding">
      <path value="Composition.section.section.author.identifier.type.coding" />
      <short value="용어체계(terminology system)에 의해 정의된 코드(code)" />
      <definition value="용어체계(terminology system)에 의해 정의된 코드(code) 참조" />
    </element>
    <element id="Composition.section.section.author.identifier.type.coding.id">
      <path value="Composition.section.section.author.identifier.type.coding.id" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
    </element>
    <element id="Composition.section.section.author.identifier.type.coding.system">
      <path value="Composition.section.section.author.identifier.type.coding.system" />
      <short value="용어체계 식별(Identity of terminology system)" />
      <definition value="코드(code)에서 기호(symbol)의 의미를 정의하는 CodeSystem[]를 식별" />
    </element>
    <element id="Composition.section.section.author.identifier.type.coding.version">
      <path value="Composition.section.section.author.identifier.type.coding.version" />
      <short value="해당 시스템의 버전 정보 - 필요한 경우" />
      <definition value="해당 코드(code)를 선택한 시점에 사용된 CodeSystem[]의 버전임. 올바로 관리된 CodeSystem[]은 코드(code)의 의미가 버전과 관계없이 일관적이므로 버전을 보고할 필요가 없음. 그러나 CodeSystem[]의 관리 상태는 지속적으로 보장할 수 없는 부분이며, 코드(code)의 의미가 일관적임을 보장할 수 없는 경우 버전이 교체되어야 함." />
    </element>
    <element id="Composition.section.section.author.identifier.type.coding.code">
      <path value="Composition.section.section.author.identifier.type.coding.code" />
      <short value="시스템에 정의된 구문(syntax)의 기호(symbol)" />
      <definition value="시스템에 정의된 구문(syntax)의 기호(symbol). 기호(symbol)은 CodeSystem[]에 의해 정의된 구문에서 미리 정의된 코드(code) 또는 표현(expression)일 수 있음. (예: post-coordination)" />
    </element>
    <element id="Composition.section.section.author.identifier.type.coding.display">
      <path value="Composition.section.section.author.identifier.type.coding.display" />
      <short value="시스템에 정의된 표기(representation)" />
      <definition value="시스템의 규칙(rules)에 따른, 시스템에서 코드(code)의 의미 표기(representation)" />
    </element>
    <element id="Composition.section.section.author.identifier.type.coding.userSelected">
      <path value="Composition.section.section.author.identifier.type.coding.userSelected" />
      <short value="해당 코딩(coding)이 사용자(user)에 의해 직접(directly) 선택되었는지 여부" />
      <definition value="해당 코딩(coding)이 사용자(user)에 의해 직접 선택되었음을 나타냄 - (예) 사용가능한 항목(item)의 선택 목록(list) 중 하나 (코드 또는 디스플레이 )" />
    </element>
    <element id="Composition.section.section.author.identifier.type.text">
      <path value="Composition.section.section.author.identifier.type.text" />
      <short value="개념(concept)에 대한 일반 텍스트 표현 (plain text representation)" />
      <definition value="데이터를 입력한 사용자(user)의 입장에서 보거나(seen)/선택하거나(selected)/언급한대로(uttered)의 개념(concept), 혹은 사용자(user)가 의도한 의미를 사람이 사용하는 언어로 표현한 것임." />
    </element>
    <element id="Composition.section.section.author.identifier.system">
      <path value="Composition.section.section.author.identifier.system" />
      <short value="식별자(identifier) 값의 네임스페이스(namespace)" />
      <definition value="설정 값에 대한 네임스페이스 (namespace), 즉 고유(unique)한 설정값을 설명하는 URL을 설정함." />
    </element>
    <element id="Composition.section.section.author.identifier.value">
      <path value="Composition.section.section.author.identifier.value" />
      <short value="고유(unique)한 값(value)" />
      <definition value="일반적으로 사용자(user)와 관련(relevant)이 있으며, 시스템 컨텍스트(context) 내에서 고유(unique)한 식별자(identifier)의 일부분임." />
    </element>
    <element id="Composition.section.section.author.identifier.period">
      <path value="Composition.section.section.author.identifier.period" />
      <short value="식별자(identifier)의 유효 기간" />
      <definition value="식별자(identifier)가 사용 가능했거나 가능한 기간을 나타냄." />
    </element>
    <element id="Composition.section.section.author.identifier.period.id">
      <path value="Composition.section.section.author.identifier.period.id" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
    </element>
    <element id="Composition.section.section.author.identifier.period.start">
      <path value="Composition.section.section.author.identifier.period.start" />
      <short value="해당 유효 기간의 시작 시점 (설정된 날짜 포함)" />
      <definition value="해당 유효 기간이 시작되는 시점을 나타냄. 유효 기간은 시작 시점으로 설정된 날짜를 포함함." />
    </element>
    <element id="Composition.section.section.author.identifier.period.end">
      <path value="Composition.section.section.author.identifier.period.end" />
      <short value="해당 유효 기간의 종료 시점 (설정된 날짜 포함)" />
      <definition value="기간의 종료. 기간의 종료가 누락된 경우, 인스턴스가 생성될 때 끝이 알려지거나 계획되지 않았음을 의미함. 시작일은 과거일 수 있고 종료일은 미래일 수 있음. 이는 해당 기간이 해당 시간에 종료될 예정임을 의미함" />
    </element>
    <element id="Composition.section.section.author.identifier.assigner">
      <path value="Composition.section.section.author.identifier.assigner" />
      <short value="식별자(identifier)를 발급한 조직(단순 텍스트 기입 가능)" />
      <definition value="식별자(identifier)를 발급/관리하는 조직(organization)" />
    </element>
    <element id="Composition.section.section.author.display">
      <path value="Composition.section.section.author.display" />
      <short value="해당 리소스(resource)에 대한 대체 텍스트(alternative text)" />
      <definition value="리소스(resource) 참조 외에도 리소스(resource)를 식별하기 위한 일반 텍스트 설명임." />
    </element>
    <element id="Composition.section.section.focus">
      <path value="Composition.section.section.focus" />
      <short value="Composition[]의 주제에 관한 것 아닐 때, 섹션이 누구/무엇에 관한 것인지에 관한 내용" />
      <definition value="Composition[]의 대상은 아니면서, (환자 대상의 경우) 배우자, 부모, 태아 또는 기증자와 같이 주제와 관련된 어떤것 또는 누군가를 나타낼 때 섹션의 실제 초점을 나타냄. focus항목이 지정되지 않을경우, focus는 parent 섹션의 focus 또는 Composition[] 자신을 대상으로 함. focus를 포함한 섹션은 논리적 subject(환자, 환자, 주제, 포커스 등)가 섹션 focus와 일치하는 리소스 또는 논리적 subject(일부 리소스)가 없는 리소스를 포함해야 함." />
    </element>
    <element id="Composition.section.section.focus.id">
      <path value="Composition.section.section.focus.id" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
    </element>
    <element id="Composition.section.section.focus.reference">
      <path value="Composition.section.section.focus.reference" />
      <short value="문자로 표현된(literal) 참조, 상대적, 내부적 혹은 절대적인 URL" />
      <definition value="다른 리소스(resource)를 찾을 수 있는 위치에 대한 참조를 의미함. 해당 참조는 service base URL에 상대적인(relative) 경우 상대적 참조, 혹은 해당 리소스(resource)를 찾을 수 있는 위치인 절대(absolute) URL일 수 있음. 해당 참조는 버전에 따라 다를 수 있음. 해당 참조가 FHIR RESTful 서버가 아닌 경우, 버전에 따라 다른 것으로 간주함. 내부 구문(Internal Fragment) 참조('#'으로 시작)는 포함되어 있는 리소스(resource)를 참조함." />
    </element>
    <element id="Composition.section.section.focus.type">
      <path value="Composition.section.section.focus.type" />
      <short value="참조(reference)가 참조(refer)하는 유형(type)  (예. &quot;Patient&quot;)" />
      <definition value="참조 대상의 예상 형식(expected type).  Reference.type과 Reference.reference가 모두 채워지고 Reference.reference가 FHIR URL이면 두가지 모두 일치해야함. 유형(type)은이 참조가 참조하는 유형(type) 인 리소스(resource) 정의의 표준(Canonical) URL임. 참조는 http://hl7.org/fhir/StructureDefinition/과 관련된 URL임. (예) &quot; 환자 &quot; http://hl7.org/fhir/StructureDefinition/Patient에 대한 참조. 절대(absolute) URL은 논리 모델에만 허용됨 (리소스(resource)가 아닌 논리 모델의 참조에서만 사용할 수 있음)." />
    </element>
    <element id="Composition.section.section.focus.identifier">
      <path value="Composition.section.section.focus.identifier" />
      <short value="문자로 표현된(literal) 참조를 알 수 없는 경우 사용하는, 논리적(logical) 참조" />
      <definition value="대상 리소스(resource)의 식별자(identifier). 이것은 다른 리소스(resource)를 직접 참조할 방법이 없을 때 사용- 해당 엔티티(entity)가 FHIR 서버를 통해 사용할 수 없거나  리소스(resource) 작성자가 알려진 식별자(identifier)를 실제 위치로 변활할 방법이 없기 때문에 이 방법이 사용됨. Reference.identifier가 실제로 FHIR 인스턴스로 노출되는 것을 가리킬(point) 필요는 없지만, FHIR 인스턴스로 노출될 것으로 예상되는 비즈니스 개념(concept)을 가리켜야하며, 해당 인스턴스는 참조가 허용되는 FHIR 리소스 타입(resource type)이여야 함." />
    </element>
    <element id="Composition.section.section.focus.identifier.id">
      <path value="Composition.section.section.focus.identifier.id" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
    </element>
    <element id="Composition.section.section.focus.identifier.use">
      <path value="Composition.section.section.focus.identifier.use" />
      <short value="usual | official | temp | secondary | old (If known)" />
      <definition value="해당 식별자(identifier)의 목적" />
    </element>
    <element id="Composition.section.section.focus.identifier.type">
      <path value="Composition.section.section.focus.identifier.type" />
      <short value="식별자(identifier)에 대한 설명" />
      <definition value="특정 목적으로 사용되는 식별자(identifier)를 결정하기 위해 사용하는 식별자(identifier)의 코드화된(coded) 유형(type)을 나타냄." />
    </element>
    <element id="Composition.section.section.focus.identifier.type.id">
      <path value="Composition.section.section.focus.identifier.type.id" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
    </element>
    <element id="Composition.section.section.focus.identifier.type.coding">
      <path value="Composition.section.section.focus.identifier.type.coding" />
      <short value="용어체계(terminology system)에 의해 정의된 코드(code)" />
      <definition value="용어체계(terminology system)에 의해 정의된 코드(code) 참조" />
    </element>
    <element id="Composition.section.section.focus.identifier.type.coding.id">
      <path value="Composition.section.section.focus.identifier.type.coding.id" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
    </element>
    <element id="Composition.section.section.focus.identifier.type.coding.system">
      <path value="Composition.section.section.focus.identifier.type.coding.system" />
      <short value="용어체계 식별(Identity of terminology system)" />
      <definition value="코드(code)에서 기호(symbol)의 의미를 정의하는 CodeSystem[]를 식별" />
    </element>
    <element id="Composition.section.section.focus.identifier.type.coding.version">
      <path value="Composition.section.section.focus.identifier.type.coding.version" />
      <short value="해당 시스템의 버전 정보 - 필요한 경우" />
      <definition value="해당 코드(code)를 선택한 시점에 사용된 CodeSystem[]의 버전임. 올바로 관리된 CodeSystem[]은 코드(code)의 의미가 버전과 관계없이 일관적이므로 버전을 보고할 필요가 없음. 그러나 CodeSystem[]의 관리 상태는 지속적으로 보장할 수 없는 부분이며, 코드(code)의 의미가 일관적임을 보장할 수 없는 경우 버전이 교체되어야 함." />
    </element>
    <element id="Composition.section.section.focus.identifier.type.coding.code">
      <path value="Composition.section.section.focus.identifier.type.coding.code" />
      <short value="시스템에 정의된 구문(syntax)의 기호(symbol)" />
      <definition value="시스템에 정의된 구문(syntax)의 기호(symbol). 기호(symbol)은 CodeSystem[]에 의해 정의된 구문에서 미리 정의된 코드(code) 또는 표현(expression)일 수 있음. (예: post-coordination)" />
    </element>
    <element id="Composition.section.section.focus.identifier.type.coding.display">
      <path value="Composition.section.section.focus.identifier.type.coding.display" />
      <short value="시스템에 정의된 표기(representation)" />
      <definition value="시스템의 규칙(rules)에 따른, 시스템에서 코드(code)의 의미 표기(representation)" />
    </element>
    <element id="Composition.section.section.focus.identifier.type.coding.userSelected">
      <path value="Composition.section.section.focus.identifier.type.coding.userSelected" />
      <short value="해당 코딩(coding)이 사용자(user)에 의해 직접(directly) 선택되었는지 여부" />
      <definition value="해당 코딩(coding)이 사용자(user)에 의해 직접 선택되었음을 나타냄 - (예) 사용가능한 항목(item)의 선택 목록(list) 중 하나 (코드 또는 디스플레이 )" />
    </element>
    <element id="Composition.section.section.focus.identifier.type.text">
      <path value="Composition.section.section.focus.identifier.type.text" />
      <short value="개념(concept)에 대한 일반 텍스트 표현 (plain text representation)" />
      <definition value="데이터를 입력한 사용자(user)의 입장에서 보거나(seen)/선택하거나(selected)/언급한대로(uttered)의 개념(concept), 혹은 사용자(user)가 의도한 의미를 사람이 사용하는 언어로 표현한 것임." />
    </element>
    <element id="Composition.section.section.focus.identifier.system">
      <path value="Composition.section.section.focus.identifier.system" />
      <short value="식별자(identifier) 값의 네임스페이스(namespace)" />
      <definition value="설정 값에 대한 네임스페이스 (namespace), 즉 고유(unique)한 설정값을 설명하는 URL을 설정함." />
    </element>
    <element id="Composition.section.section.focus.identifier.value">
      <path value="Composition.section.section.focus.identifier.value" />
      <short value="고유(unique)한 값(value)" />
      <definition value="일반적으로 사용자(user)와 관련(relevant)이 있으며, 시스템 컨텍스트(context) 내에서 고유(unique)한 식별자(identifier)의 일부분임." />
    </element>
    <element id="Composition.section.section.focus.identifier.period">
      <path value="Composition.section.section.focus.identifier.period" />
      <short value="식별자(identifier)의 유효 기간" />
      <definition value="식별자(identifier)가 사용 가능했거나 가능한 기간을 나타냄." />
    </element>
    <element id="Composition.section.section.focus.identifier.period.id">
      <path value="Composition.section.section.focus.identifier.period.id" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
    </element>
    <element id="Composition.section.section.focus.identifier.period.start">
      <path value="Composition.section.section.focus.identifier.period.start" />
      <short value="해당 유효 기간의 시작 시점 (설정된 날짜 포함)" />
      <definition value="해당 유효 기간이 시작되는 시점을 나타냄. 유효 기간은 시작 시점으로 설정된 날짜를 포함함." />
    </element>
    <element id="Composition.section.section.focus.identifier.period.end">
      <path value="Composition.section.section.focus.identifier.period.end" />
      <short value="해당 유효 기간의 종료 시점 (설정된 날짜 포함)" />
      <definition value="기간의 종료. 기간의 종료가 누락된 경우, 인스턴스가 생성될 때 끝이 알려지거나 계획되지 않았음을 의미함. 시작일은 과거일 수 있고 종료일은 미래일 수 있음. 이는 해당 기간이 해당 시간에 종료될 예정임을 의미함" />
    </element>
    <element id="Composition.section.section.focus.identifier.assigner">
      <path value="Composition.section.section.focus.identifier.assigner" />
      <short value="식별자(identifier)를 발급한 조직(단순 텍스트 기입 가능)" />
      <definition value="식별자(identifier)를 발급/관리하는 조직(organization)" />
    </element>
    <element id="Composition.section.section.focus.display">
      <path value="Composition.section.section.focus.display" />
      <short value="해당 리소스(resource)에 대한 대체 텍스트(alternative text)" />
      <definition value="리소스(resource) 참조 외에도 리소스(resource)를 식별하기 위한 일반 텍스트 설명임." />
    </element>
    <element id="Composition.section.section.text">
      <path value="Composition.section.section.text" />
      <short value="부문(section)의 내용 요약" />
      <definition value="읽는 사람이 리소스의 내용을 알 수 있도록 되어있는 설명을 의미하며, 부문 (section)의 컨텐츠를 포함하고 있음. 해당 설명 내에 구조화된 데이터를 모두 인코딩할 필요는 없지만, &quot;임상적으로 안전&quot; 하도록 세부사항을 충분히 포함해야 함." />
    </element>
    <element id="Composition.section.section.text.id">
      <path value="Composition.section.section.text.id" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
    </element>
    <element id="Composition.section.section.text.status">
      <path value="Composition.section.section.text.status" />
      <short value="generated | extensions | additional | empty" />
      <definition value="설명의 상태. 자동으로 생성 되었는지, 사람에 의해 수동적으로 생성되었는지, 데이터 추가가 가능한지 여부를 나타냄." />
    </element>
    <element id="Composition.section.section.text.div">
      <path value="Composition.section.section.text.div" />
      <short value="제한된 XHTML 컨텐츠(content)" />
      <definition value="설명의 실제 컨텐츠(content). 가장 기본적인 XHTML 버전임." />
    </element>
    <element id="Composition.section.section.mode">
      <path value="Composition.section.section.mode" />
      <short value="working | snapshot | changes" />
      <definition value="항목 목록(entry litst)이 어떻게 준비되었는지를 나타냄. 유지 관리하기에 적합한 작업 목록인지, 다른 소스로 부터 얻어진 항목의 스냅샷인지, 혹은 항목이 추가, 수정, 삭제 된 것으로 표시 될 수 있는지의 여부를 의미함." />
    </element>
    <element id="Composition.section.section.orderedBy">
      <path value="Composition.section.section.orderedBy" />
      <short value="부문 (section) 내의 항목(entry)의 순서" />
      <definition value="항목(entry)들이 적용되는 순서를 지정함" />
    </element>
    <element id="Composition.section.section.orderedBy.id">
      <path value="Composition.section.section.orderedBy.id" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
    </element>
    <element id="Composition.section.section.orderedBy.coding">
      <path value="Composition.section.section.orderedBy.coding" />
      <short value="용어체계(terminology system)에 의해 정의된 코드(code)" />
      <definition value="용어체계(terminology system)에 의해 정의된 코드(code) 참조" />
    </element>
    <element id="Composition.section.section.orderedBy.coding.id">
      <path value="Composition.section.section.orderedBy.coding.id" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
    </element>
    <element id="Composition.section.section.orderedBy.coding.system">
      <path value="Composition.section.section.orderedBy.coding.system" />
      <short value="용어체계 식별(Identity of terminology system)" />
      <definition value="코드(code)에서 기호(symbol)의 의미를 정의하는 CodeSystem[]를 식별" />
    </element>
    <element id="Composition.section.section.orderedBy.coding.version">
      <path value="Composition.section.section.orderedBy.coding.version" />
      <short value="해당 시스템의 버전 정보 - 필요한 경우" />
      <definition value="해당 코드(code)를 선택한 시점에 사용된 CodeSystem[]의 버전임. 올바로 관리된 CodeSystem[]은 코드(code)의 의미가 버전과 관계없이 일관적이므로 버전을 보고할 필요가 없음. 그러나 CodeSystem[]의 관리 상태는 지속적으로 보장할 수 없는 부분이며, 코드(code)의 의미가 일관적임을 보장할 수 없는 경우 버전이 교체되어야 함." />
    </element>
    <element id="Composition.section.section.orderedBy.coding.code">
      <path value="Composition.section.section.orderedBy.coding.code" />
      <short value="시스템에 정의된 구문(syntax)의 기호(symbol)" />
      <definition value="시스템에 정의된 구문(syntax)의 기호(symbol). 기호(symbol)은 CodeSystem[]에 의해 정의된 구문에서 미리 정의된 코드(code) 또는 표현(expression)일 수 있음. (예: post-coordination)" />
    </element>
    <element id="Composition.section.section.orderedBy.coding.display">
      <path value="Composition.section.section.orderedBy.coding.display" />
      <short value="시스템에 정의된 표기(representation)" />
      <definition value="시스템의 규칙(rules)에 따른, 시스템에서 코드(code)의 의미 표기(representation)" />
    </element>
    <element id="Composition.section.section.orderedBy.coding.userSelected">
      <path value="Composition.section.section.orderedBy.coding.userSelected" />
      <short value="해당 코딩(coding)이 사용자(user)에 의해 직접(directly) 선택되었는지 여부" />
      <definition value="해당 코딩(coding)이 사용자(user)에 의해 직접 선택되었음을 나타냄 - (예) 사용가능한 항목(item)의 선택 목록(list) 중 하나 (코드 또는 디스플레이 )" />
    </element>
    <element id="Composition.section.section.orderedBy.text">
      <path value="Composition.section.section.orderedBy.text" />
      <short value="개념(concept)에 대한 일반 텍스트 표현 (plain text representation)" />
      <definition value="데이터를 입력한 사용자(user)의 입장에서 보거나(seen)/선택하거나(selected)/언급한대로(uttered)의 개념(concept), 혹은 사용자(user)가 의도한 의미를 사람이 사용하는 언어로 표현한 것임." />
    </element>
    <element id="Composition.section.section.entry">
      <path value="Composition.section.section.entry" />
      <short value="해당 부문(section)을 보조해주는 참조 데이터" />
      <definition value="부문 (section)의 설명이 파생되는 실제 리소스에 대한 참조" />
    </element>
    <element id="Composition.section.section.entry.id">
      <path value="Composition.section.section.entry.id" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
    </element>
    <element id="Composition.section.section.entry.reference">
      <path value="Composition.section.section.entry.reference" />
      <short value="문자로 표현된(literal) 참조, 상대적, 내부적 혹은 절대적인 URL" />
      <definition value="다른 리소스(resource)를 찾을 수 있는 위치에 대한 참조를 의미함. 해당 참조는 service base URL에 상대적인(relative) 경우 상대적 참조, 혹은 해당 리소스(resource)를 찾을 수 있는 위치인 절대(absolute) URL일 수 있음. 해당 참조는 버전에 따라 다를 수 있음. 해당 참조가 FHIR RESTful 서버가 아닌 경우, 버전에 따라 다른 것으로 간주함. 내부 구문(Internal Fragment) 참조('#'으로 시작)는 포함되어 있는 리소스(resource)를 참조함." />
    </element>
    <element id="Composition.section.section.entry.type">
      <path value="Composition.section.section.entry.type" />
      <short value="참조(reference)가 참조(refer)하는 유형(type)  (예. &quot;Patient&quot;)" />
      <definition value="참조 대상의 예상 형식(expected type).  Reference.type과 Reference.reference가 모두 채워지고 Reference.reference가 FHIR URL이면 두가지 모두 일치해야함. 유형(type)은이 참조가 참조하는 유형(type) 인 리소스(resource) 정의의 표준(Canonical) URL임. 참조는 http://hl7.org/fhir/StructureDefinition/과 관련된 URL임. (예) &quot; 환자 &quot; http://hl7.org/fhir/StructureDefinition/Patient에 대한 참조. 절대(absolute) URL은 논리 모델에만 허용됨 (리소스(resource)가 아닌 논리 모델의 참조에서만 사용할 수 있음)." />
    </element>
    <element id="Composition.section.section.entry.identifier">
      <path value="Composition.section.section.entry.identifier" />
      <short value="문자로 표현된(literal) 참조를 알 수 없는 경우 사용하는, 논리적(logical) 참조" />
      <definition value="대상 리소스(resource)의 식별자(identifier). 이것은 다른 리소스(resource)를 직접 참조할 방법이 없을 때 사용- 해당 엔티티(entity)가 FHIR 서버를 통해 사용할 수 없거나  리소스(resource) 작성자가 알려진 식별자(identifier)를 실제 위치로 변활할 방법이 없기 때문에 이 방법이 사용됨. Reference.identifier가 실제로 FHIR 인스턴스로 노출되는 것을 가리킬(point) 필요는 없지만, FHIR 인스턴스로 노출될 것으로 예상되는 비즈니스 개념(concept)을 가리켜야하며, 해당 인스턴스는 참조가 허용되는 FHIR 리소스 타입(resource type)이여야 함." />
    </element>
    <element id="Composition.section.section.entry.identifier.id">
      <path value="Composition.section.section.entry.identifier.id" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
    </element>
    <element id="Composition.section.section.entry.identifier.use">
      <path value="Composition.section.section.entry.identifier.use" />
      <short value="usual | official | temp | secondary | old (If known)" />
      <definition value="해당 식별자(identifier)의 목적" />
    </element>
    <element id="Composition.section.section.entry.identifier.type">
      <path value="Composition.section.section.entry.identifier.type" />
      <short value="식별자(identifier)에 대한 설명" />
      <definition value="특정 목적으로 사용되는 식별자(identifier)를 결정하기 위해 사용하는 식별자(identifier)의 코드화된(coded) 유형(type)을 나타냄." />
    </element>
    <element id="Composition.section.section.entry.identifier.type.id">
      <path value="Composition.section.section.entry.identifier.type.id" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
    </element>
    <element id="Composition.section.section.entry.identifier.type.coding">
      <path value="Composition.section.section.entry.identifier.type.coding" />
      <short value="용어체계(terminology system)에 의해 정의된 코드(code)" />
      <definition value="용어체계(terminology system)에 의해 정의된 코드(code) 참조" />
    </element>
    <element id="Composition.section.section.entry.identifier.type.coding.id">
      <path value="Composition.section.section.entry.identifier.type.coding.id" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
    </element>
    <element id="Composition.section.section.entry.identifier.type.coding.system">
      <path value="Composition.section.section.entry.identifier.type.coding.system" />
      <short value="용어체계 식별(Identity of terminology system)" />
      <definition value="코드(code)에서 기호(symbol)의 의미를 정의하는 CodeSystem[]를 식별" />
    </element>
    <element id="Composition.section.section.entry.identifier.type.coding.version">
      <path value="Composition.section.section.entry.identifier.type.coding.version" />
      <short value="해당 시스템의 버전 정보 - 필요한 경우" />
      <definition value="해당 코드(code)를 선택한 시점에 사용된 CodeSystem[]의 버전임. 올바로 관리된 CodeSystem[]은 코드(code)의 의미가 버전과 관계없이 일관적이므로 버전을 보고할 필요가 없음. 그러나 CodeSystem[]의 관리 상태는 지속적으로 보장할 수 없는 부분이며, 코드(code)의 의미가 일관적임을 보장할 수 없는 경우 버전이 교체되어야 함." />
    </element>
    <element id="Composition.section.section.entry.identifier.type.coding.code">
      <path value="Composition.section.section.entry.identifier.type.coding.code" />
      <short value="시스템에 정의된 구문(syntax)의 기호(symbol)" />
      <definition value="시스템에 정의된 구문(syntax)의 기호(symbol). 기호(symbol)은 CodeSystem[]에 의해 정의된 구문에서 미리 정의된 코드(code) 또는 표현(expression)일 수 있음. (예: post-coordination)" />
    </element>
    <element id="Composition.section.section.entry.identifier.type.coding.display">
      <path value="Composition.section.section.entry.identifier.type.coding.display" />
      <short value="시스템에 정의된 표기(representation)" />
      <definition value="시스템의 규칙(rules)에 따른, 시스템에서 코드(code)의 의미 표기(representation)" />
    </element>
    <element id="Composition.section.section.entry.identifier.type.coding.userSelected">
      <path value="Composition.section.section.entry.identifier.type.coding.userSelected" />
      <short value="해당 코딩(coding)이 사용자(user)에 의해 직접(directly) 선택되었는지 여부" />
      <definition value="해당 코딩(coding)이 사용자(user)에 의해 직접 선택되었음을 나타냄 - (예) 사용가능한 항목(item)의 선택 목록(list) 중 하나 (코드 또는 디스플레이 )" />
    </element>
    <element id="Composition.section.section.entry.identifier.type.text">
      <path value="Composition.section.section.entry.identifier.type.text" />
      <short value="개념(concept)에 대한 일반 텍스트 표현 (plain text representation)" />
      <definition value="데이터를 입력한 사용자(user)의 입장에서 보거나(seen)/선택하거나(selected)/언급한대로(uttered)의 개념(concept), 혹은 사용자(user)가 의도한 의미를 사람이 사용하는 언어로 표현한 것임." />
    </element>
    <element id="Composition.section.section.entry.identifier.system">
      <path value="Composition.section.section.entry.identifier.system" />
      <short value="식별자(identifier) 값의 네임스페이스(namespace)" />
      <definition value="설정 값에 대한 네임스페이스 (namespace), 즉 고유(unique)한 설정값을 설명하는 URL을 설정함." />
    </element>
    <element id="Composition.section.section.entry.identifier.value">
      <path value="Composition.section.section.entry.identifier.value" />
      <short value="고유(unique)한 값(value)" />
      <definition value="일반적으로 사용자(user)와 관련(relevant)이 있으며, 시스템 컨텍스트(context) 내에서 고유(unique)한 식별자(identifier)의 일부분임." />
    </element>
    <element id="Composition.section.section.entry.identifier.period">
      <path value="Composition.section.section.entry.identifier.period" />
      <short value="식별자(identifier)의 유효 기간" />
      <definition value="식별자(identifier)가 사용 가능했거나 가능한 기간을 나타냄." />
    </element>
    <element id="Composition.section.section.entry.identifier.period.id">
      <path value="Composition.section.section.entry.identifier.period.id" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
    </element>
    <element id="Composition.section.section.entry.identifier.period.start">
      <path value="Composition.section.section.entry.identifier.period.start" />
      <short value="해당 유효 기간의 시작 시점 (설정된 날짜 포함)" />
      <definition value="해당 유효 기간이 시작되는 시점을 나타냄. 유효 기간은 시작 시점으로 설정된 날짜를 포함함." />
    </element>
    <element id="Composition.section.section.entry.identifier.period.end">
      <path value="Composition.section.section.entry.identifier.period.end" />
      <short value="해당 유효 기간의 종료 시점 (설정된 날짜 포함)" />
      <definition value="기간의 종료. 기간의 종료가 누락된 경우, 인스턴스가 생성될 때 끝이 알려지거나 계획되지 않았음을 의미함. 시작일은 과거일 수 있고 종료일은 미래일 수 있음. 이는 해당 기간이 해당 시간에 종료될 예정임을 의미함" />
    </element>
    <element id="Composition.section.section.entry.identifier.assigner">
      <path value="Composition.section.section.entry.identifier.assigner" />
      <short value="식별자(identifier)를 발급한 조직(단순 텍스트 기입 가능)" />
      <definition value="식별자(identifier)를 발급/관리하는 조직(organization)" />
    </element>
    <element id="Composition.section.section.entry.display">
      <path value="Composition.section.section.entry.display" />
      <short value="해당 리소스(resource)에 대한 대체 텍스트(alternative text)" />
      <definition value="리소스(resource) 참조 외에도 리소스(resource)를 식별하기 위한 일반 텍스트 설명임." />
    </element>
    <element id="Composition.section.section.emptyReason">
      <path value="Composition.section.section.emptyReason" />
      <short value="부문(section)이 비어있는 이유" />
      <definition value="부문(section)이 비어있는 경우는 항목이 비어있음. 비어있는 부문은 일반적으로 빈 이유를 설명하는 텍스트가 있음." />
    </element>
    <element id="Composition.section.section.emptyReason.id">
      <path value="Composition.section.section.emptyReason.id" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
    </element>
    <element id="Composition.section.section.emptyReason.coding">
      <path value="Composition.section.section.emptyReason.coding" />
      <short value="용어체계(terminology system)에 의해 정의된 코드(code)" />
      <definition value="용어체계(terminology system)에 의해 정의된 코드(code) 참조" />
    </element>
    <element id="Composition.section.section.emptyReason.coding.id">
      <path value="Composition.section.section.emptyReason.coding.id" />
      <short value="요소-간(inter-element)의 참조를 위한 고유(unique) ID" />
      <definition value="리소스(resource) 안의 요소의 고유(unique) ID(내부 참조용)임. 공백이 없는 문자열 값일 수 있음." />
    </element>
    <element id="Composition.section.section.emptyReason.coding.system">
      <path value="Composition.section.section.emptyReason.coding.system" />
      <short value="용어체계 식별(Identity of terminology system)" />
      <definition value="코드(code)에서 기호(symbol)의 의미를 정의하는 CodeSystem[]를 식별" />
    </element>
    <element id="Composition.section.section.emptyReason.coding.version">
      <path value="Composition.section.section.emptyReason.coding.version" />
      <short value="해당 시스템의 버전 정보 - 필요한 경우" />
      <definition value="해당 코드(code)를 선택한 시점에 사용된 CodeSystem[]의 버전임. 올바로 관리된 CodeSystem[]은 코드(code)의 의미가 버전과 관계없이 일관적이므로 버전을 보고할 필요가 없음. 그러나 CodeSystem[]의 관리 상태는 지속적으로 보장할 수 없는 부분이며, 코드(code)의 의미가 일관적임을 보장할 수 없는 경우 버전이 교체되어야 함." />
    </element>
    <element id="Composition.section.section.emptyReason.coding.code">
      <path value="Composition.section.section.emptyReason.coding.code" />
      <short value="시스템에 정의된 구문(syntax)의 기호(symbol)" />
      <definition value="시스템에 정의된 구문(syntax)의 기호(symbol). 기호(symbol)은 CodeSystem[]에 의해 정의된 구문에서 미리 정의된 코드(code) 또는 표현(expression)일 수 있음. (예: post-coordination)" />
    </element>
    <element id="Composition.section.section.emptyReason.coding.display">
      <path value="Composition.section.section.emptyReason.coding.display" />
      <short value="시스템에 정의된 표기(representation)" />
      <definition value="시스템의 규칙(rules)에 따른, 시스템에서 코드(code)의 의미 표기(representation)" />
    </element>
    <element id="Composition.section.section.emptyReason.coding.userSelected">
      <path value="Composition.section.section.emptyReason.coding.userSelected" />
      <short value="해당 코딩(coding)이 사용자(user)에 의해 직접(directly) 선택되었는지 여부" />
      <definition value="해당 코딩(coding)이 사용자(user)에 의해 직접 선택되었음을 나타냄 - (예) 사용가능한 항목(item)의 선택 목록(list) 중 하나 (코드 또는 디스플레이 )" />
    </element>
    <element id="Composition.section.section.emptyReason.text">
      <path value="Composition.section.section.emptyReason.text" />
      <short value="개념(concept)에 대한 일반 텍스트 표현 (plain text representation)" />
      <definition value="데이터를 입력한 사용자(user)의 입장에서 보거나(seen)/선택하거나(selected)/언급한대로(uttered)의 개념(concept), 혹은 사용자(user)가 의도한 의미를 사람이 사용하는 언어로 표현한 것임." />
    </element>
    <element id="Composition.section.section.section">
      <path value="Composition.section.section.section" />
      <short value="중첩된 부문(section)" />
      <definition value="해당 섹션 내에 중첩된 하위-부문(sub-section)" />
    </element>
  </differential>
</StructureDefinition>