<status value="draft" /> <description value="The NutritionProduct resource represents the identification of a food or fluid product consumed by patients. The scope of the NutritionProduct resource includes all the products that are understood to be food and beverage products for human consumption. It is lacking in FHIR 4 and therefore derived from the Basic profile. It willl be replaced by an adapted [NutritionProduct](https://hl7.org/fhir/nutritionproduct.html) profile once NoMA has transitioned to use FHIR R5 and above." /> <purpose value="This resource represents enteral nutrition available in Norwegian pharmacies" /> <fhirVersion value="4.0.1" /> <kind value="resource" /> <abstract value="false" /> <type value="Basic" /> <baseDefinition value="http://hl7.org/fhir/StructureDefinition/Basic" /> <derivation value="constraint" /> <snapshot> <element id="Basic"> <path value="Basic" /> <short value="Resource for non-supported content" /> <definition value="Basic is used for handling concepts not yet defined in FHIR, narrative-only resources that don't map to an existing resource, and custom resources not appropriate for inclusion in the FHIR specification." /> <alias value="Z-resource" /> <alias value="Extension-resource" /> <alias value="Custom-resource" /> <min value="0" /> <max value="*" /> <base> <path value="Basic" /> <min value="0" /> <max value="*" /> </base> <constraint> <key value="dom-2" /> <severity value="error" /> <human value="If the resource is contained in another resource, it SHALL NOT contain nested Resources" /> <expression value="contained.contained.empty()" /> <xpath value="not(parent::f:contained and f:contained)" /> <source value="http://hl7.org/fhir/StructureDefinition/DomainResource" /> </constraint> <constraint> <key value="dom-4" /> <severity value="error" /> <human value="If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated" /> <expression value="contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()" /> <xpath value="not(exists(f:contained/*/f:meta/f:versionId)) and not(exists(f:contained/*/f:meta/f:lastUpdated))" /> <source value="http://hl7.org/fhir/StructureDefinition/DomainResource" /> </constraint> <constraint> <key value="dom-3" /> <severity value="error" /> <human value="If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource" /> <expression value="contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty()" /> <xpath value="not(exists(for $id in f:contained/*/f:id/@value return $contained[not(parent::*/descendant::f:reference/@value=concat('#', $contained/*/id/@value) or descendant::f:reference[@value='#'])]))" /> <source value="http://hl7.org/fhir/StructureDefinition/DomainResource" /> </constraint> <constraint> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bestpractice"> <valueBoolean value="true" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bestpractice-explanation"> <valueMarkdown value="When a resource has no narrative, only systems that fully understand the data can display the resource to a human safely. Including a human readable representation in the resource makes for a much more robust eco-system and cheaper handling of resources by intermediary systems. Some ecosystems restrict distribution of resources to only those systems that do fully understand the resources, and as a consequence implementers may believe that the narrative is superfluous. However experience shows that such eco-systems often open up to new participants over time." /> </extension> <key value="dom-6" /> <severity value="warning" /> <human value="A resource should have narrative for robust management" /> <expression value="text.`div`.exists()" /> <xpath value="exists(f:text/h:div)" /> <source value="http://hl7.org/fhir/StructureDefinition/DomainResource" /> </constraint> <constraint> <key value="dom-5" /> <severity value="error" /> <human value="If a resource is contained in another resource, it SHALL NOT have a security label" /> <expression value="contained.meta.security.empty()" /> <xpath value="not(exists(f:contained/*/f:meta/f:security))" /> <source value="http://hl7.org/fhir/StructureDefinition/DomainResource" /> </constraint> <mapping> <identity value="rim" /> <map value="Entity. Role, or Act" /> </mapping> <mapping> <identity value="rim" /> <map value="Act, Entity or Role" /> </mapping> </element> <element id="Basic.id"> <path value="Basic.id" /> <short value="Logical id of this artifact" /> <definition value="The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes." /> <comment value="The only time that a resource does not have an id is when it is being submitted to the server using a create operation." /> <min value="0" /> <max value="1" /> <base> <path value="Resource.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <isSummary value="true" /> </element> <element id="Basic.meta"> <path value="Basic.meta" /> <short value="Metadata about the resource" /> <definition value="The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource." /> <min value="0" /> <max value="1" /> <base> <path value="Resource.meta" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Meta" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Basic.implicitRules"> <path value="Basic.implicitRules" /> <short value="A set of rules under which this content was created" /> <definition value="A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc." /> <comment value="Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc." /> <min value="0" /> <max value="1" /> <base> <path value="Resource.implicitRules" /> <min value="0" /> <max value="1" /> </base> <type> <code value="uri" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isModifier value="true" /> <isModifierReason value="This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Basic.language"> <path value="Basic.language" /> <short value="Language of the resource content" /> <definition value="The base language in which the resource is written." /> <comment value="Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute)." /> <min value="0" /> <max value="1" /> <base> <path value="Resource.language" /> <min value="0" /> <max value="1" /> </base> <type> <code value="code" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-maxValueSet"> <valueCanonical value="http://hl7.org/fhir/ValueSet/all-languages" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="Language" /> </extension> <strength value="preferred" /> <description value="A human language." /> <valueSet value="http://hl7.org/fhir/ValueSet/languages" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Basic.text"> <path value="Basic.text" /> <short value="Text summary of the resource, for human interpretation" /> <definition value="A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety." /> <comment value="Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later." /> <alias value="narrative" /> <alias value="html" /> <alias value="xhtml" /> <alias value="display" /> <min value="0" /> <max value="1" /> <base> <path value="DomainResource.text" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Narrative" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> <mapping> <identity value="rim" /> <map value="Act.text?" /> </mapping> </element> <element id="Basic.contained"> <path value="Basic.contained" /> <short value="Contained, inline Resources" /> <definition value="These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope." /> <comment value="This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels." /> <alias value="inline resources" /> <alias value="anonymous resources" /> <alias value="contained resources" /> <min value="0" /> <max value="*" /> <base> <path value="DomainResource.contained" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Resource" /> </type> <mapping> <identity value="rim" /> <map value="Entity. Role, or Act" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Basic.extension"> <path value="Basic.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <ordered value="false" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="2" /> <max value="*" /> <base> <path value="DomainResource.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Basic.extension:routeOfAdministration"> <path value="Basic.extension" /> <sliceName value="routeOfAdministration" /> <short value="The route of administration of a nutrition product" /> <definition value="The route of administration of a nutrition product, usingthe SPOR RMS code system ["Routes and Methods of Administration"](https://spor.ema.europa.eu/rmswi/#/lists/100000073345/terms) Examples: Intraosseous use, Epilesional use Url: [https://mpd.noma.no/structuredefinition/routes-and-methods-of-administration-nutrition](https://mpd.noma.no/structuredefinition/routes-and-methods-of-administration-nutrition)" /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="1" /> <max value="*" /> <base> <path value="DomainResource.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> <profile value="https://example.org/fhir/StructureDefinition/RouteOfAdministrationNutrition" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <isModifier value="false" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Basic.extension:routeOfAdministration.id"> <path value="Basic.extension.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Basic.extension:routeOfAdministration.extension"> <path value="Basic.extension.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="0" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Basic.extension:routeOfAdministration.url"> <path value="Basic.extension.url" /> <representation value="xmlAttr" /> <short value="identifies the meaning of the extension" /> <definition value="Source of the definition for the extension code - a logical name or a URL." /> <comment value="The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension." /> <min value="1" /> <max value="1" /> <base> <path value="Extension.url" /> <min value="1" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="uri" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <fixedUri value="https://example.org/fhir/StructureDefinition/RouteOfAdministrationNutrition" /> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Basic.extension:routeOfAdministration.value[x]"> <path value="Basic.extension.value[x]" /> <label value="code" /> <short value="Value of extension" /> <definition value="Value of extension - must be one of a constrained set of the data types (see [Extensibility](extensibility.html) for a list)." /> <min value="1" /> <max value="1" /> <base> <path value="Extension.value[x]" /> <min value="0" /> <max value="1" /> </base> <type> <code value="CodeableConcept" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <binding> <strength value="required" /> <description value="Noma FHIR API RouteOfAdministration Code System" /> <valueSet value="https://simplifier.net/safest/routeOfAdministration-safest" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Basic.extension:status"> <path value="Basic.extension" /> <sliceName value="status" /> <short value="Publishing status of the NutritionProduct" /> <definition value="Publishing status of the NutritionProduct, mandatory in FHIR R5. Only NutritionProducts with status "active" are published. System URL: [https://mpd.noma.no/structuredefinition/nutrition-product-status](https://mpd.noma.no/structuredefinition/nutrition-product-status)" /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="1" /> <max value="1" /> <base> <path value="DomainResource.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> <profile value="https://example.org/fhir/StructureDefinition/NutritionStatus" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <isModifier value="false" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Basic.extension:status.id"> <path value="Basic.extension.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Basic.extension:status.extension"> <path value="Basic.extension.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="0" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Basic.extension:status.url"> <path value="Basic.extension.url" /> <representation value="xmlAttr" /> <short value="identifies the meaning of the extension" /> <definition value="Source of the definition for the extension code - a logical name or a URL." /> <comment value="The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension." /> <min value="1" /> <max value="1" /> <base> <path value="Extension.url" /> <min value="1" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="uri" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <fixedUri value="https://example.org/fhir/StructureDefinition/NutritionStatus" /> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Basic.extension:status.value[x]"> <path value="Basic.extension.value[x]" /> <short value="Status will always be active." /> <definition value="Value of extension - must be one of a constrained set of the data types (see [Extensibility](extensibility.html) for a list)." /> <min value="1" /> <max value="1" /> <base> <path value="Extension.value[x]" /> <min value="0" /> <max value="1" /> </base> <type> <code value="code" /> </type> <fixedCode value="active" /> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Basic.extension:for"> <path value="Basic.extension" /> <sliceName value="for" /> <short value="Relationship to a (virtual) medicinal product element." /> <definition value="Many nutrition products are marketed with small variatoins of properties not significant for their physionlogical effect, such as flavor. To be able to group these nutrition products, a relationship to a medicinal product was established. In this case, the related medicinal product contains a flag indicating that it is grouping nutrition priducts and not represetning an authorised medicinal product." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="DomainResource.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> <profile value="https://example.org/fhir/StructureDefinition/NutritionProductForMedicinalProduct" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <isModifier value="false" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Basic.extension:for.id"> <path value="Basic.extension.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Basic.extension:for.extension"> <path value="Basic.extension.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="0" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Basic.extension:for.url"> <path value="Basic.extension.url" /> <representation value="xmlAttr" /> <short value="identifies the meaning of the extension" /> <definition value="Source of the definition for the extension code - a logical name or a URL." /> <comment value="The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension." /> <min value="1" /> <max value="1" /> <base> <path value="Extension.url" /> <min value="1" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="uri" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <fixedUri value="https://example.org/fhir/StructureDefinition/NutritionProductForMedicinalProduct" /> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Basic.extension:for.value[x]"> <path value="Basic.extension.value[x]" /> <short value="Todo" /> <definition value="Value of extension - must be one of a constrained set of the data types (see [Extensibility](extensibility.html) for a list)." /> <min value="1" /> <max value="1" /> <base> <path value="Extension.value[x]" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Reference" /> <targetProfile value="https://example.org/fhir/StructureDefinition/2.0.0/MedicinalProductNOMA" /> <aggregation value="referenced" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Basic.extension:knownAllergen"> <path value="Basic.extension" /> <sliceName value="knownAllergen" /> <short value="Known or suspected allergens that are a part of this product" /> <definition value="May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="DomainResource.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> <profile value="https://example.org/fhir/StructureDefinition/NutritionProductKnownAllergen" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <isModifier value="false" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Basic.extension:characteristic"> <path value="Basic.extension" /> <sliceName value="characteristic" /> <short value="Specifies descriptive properties of the nutrition product" /> <definition value="This extension contains information on nutrition charactiristics such as pH and energy (calories). The different nutrition characteristic types is published as a the [Nutrition Characteristic Type](https://simplifier.net/guide/Implementation-guide-for-NoMA-s-FHIR-API-2.0.0/Home/Code-Systems/Nutrition/Nutrition-Characteristic-Type.page.md?version=current) Code System: | Type NO | Type EN | Definition | Value examples | Type | | :------- | :------ | :------ | | Smak | Flavour | The flavour of the nutrition product | med jordbærsmak, med nøytral smak | Code System [Smak (flavour)](https://simplifier.net/guide/Implementation-guide-for-NoMA-s-FHIR-API-2.0.0/Home/Code-Systems/Nutrition/Smak-Flavour.page.md?version=current) | | pH | pH | The pH of the nutrition product | 7,0 | String | | Osmolaritet | Osmolarity | The total concentration of all dissolved particles (solutes) in a solution, measured in osmoles per liter (Osm/L) | 300 mosmol/kg | String | | Osmolalitet | Osmolality | The concentration of solute particles (like salts, glucose, urea) per kilogram of solvent (usually water) in a solution| 1550 mosmol/kg | String | | Konsentrasjon* | Concentration* | Concentration of a type of content such as fat or energy per unit | 97 kcal | Quantity | *Concentration can relate to - energy (kcal) - energy (kJ) - lipides - carbohydrates - water - fiber - protein - amino acids - nitrogen Code system URLs used: Nutrition Characteristics Type: [https://mpd.noma.no/codesystem/nutrition-characteristic-type](https://mpd.noma.no/codesystem/nutrition-characteristic-type) Smak: [https://mpd.noma.no/codesystem/smak](https://mpd.noma.no/codesystem/smak)" /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="DomainResource.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> <profile value="https://example.org/fhir/StructureDefinition/NutritionProductCharacteristics" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <isModifier value="false" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Basic.extension:characteristic.id"> <path value="Basic.extension.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Basic.extension:characteristic.extension"> <path value="Basic.extension.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="2" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Basic.extension:characteristic.extension:type"> <path value="Basic.extension.extension" /> <sliceName value="type" /> <short value="The type of Nutrition Product Characteristic" /> <definition value="System URL: [https://mpd.noma.no/codesystem/nutrition-characteristic-type](https://mpd.noma.no/codesystem/nutrition-characteristic-type)" /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="1" /> <max value="1" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Basic.extension:characteristic.extension:type.id"> <path value="Basic.extension.extension.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Basic.extension:characteristic.extension:type.extension"> <path value="Basic.extension.extension.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="0" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Basic.extension:characteristic.extension:type.url"> <path value="Basic.extension.extension.url" /> <representation value="xmlAttr" /> <short value="identifies the meaning of the extension" /> <definition value="Source of the definition for the extension code - a logical name or a URL." /> <comment value="The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension." /> <min value="1" /> <max value="1" /> <base> <path value="Extension.url" /> <min value="1" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="uri" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <fixedUri value="type" /> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Basic.extension:characteristic.extension:type.value[x]"> <path value="Basic.extension.extension.value[x]" /> <short value="Value of extension" /> <definition value="Value of extension - must be one of a constrained set of the data types (see [Extensibility](extensibility.html) for a list)." /> <min value="0" /> <max value="1" /> <base> <path value="Extension.value[x]" /> <min value="0" /> <max value="1" /> </base> <type> <code value="CodeableConcept" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <binding> <strength value="required" /> <description value="Using NoMA Nutrition Classification Type Code System" /> <valueSet value="https://api.legemiddelverket.no/FHIR-R4/CodeSystem/e5fc47d3-5b03-4f26-ac34-86b35eba140d" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Basic.extension:characteristic.extension:value"> <path value="Basic.extension.extension" /> <sliceName value="value" /> <short value="The value of the Nutrition Product Characteristic" /> <definition value="System URLs used: Smak: [https://mpd.noma.no/codesystem/smak](https://mpd.noma.no/codesystem/smak)" /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="1" /> <max value="1" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Basic.extension:characteristic.extension:value.id"> <path value="Basic.extension.extension.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Basic.extension:characteristic.extension:value.extension"> <path value="Basic.extension.extension.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="0" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Basic.extension:characteristic.extension:value.url"> <path value="Basic.extension.extension.url" /> <representation value="xmlAttr" /> <short value="identifies the meaning of the extension" /> <definition value="Source of the definition for the extension code - a logical name or a URL." /> <comment value="The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension." /> <min value="1" /> <max value="1" /> <base> <path value="Extension.url" /> <min value="1" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="uri" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <fixedUri value="value" /> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Basic.extension:characteristic.extension:value.value[x]"> <path value="Basic.extension.extension.value[x]" /> <short value="Value of extension" /> <definition value="Value of extension - must be one of a constrained set of the data types (see [Extensibility](extensibility.html) for a list)." /> <min value="0" /> <max value="1" /> <base> <path value="Extension.value[x]" /> <min value="0" /> <max value="1" /> </base> <type> <code value="boolean" /> </type> <type> <code value="string" /> </type> <type> <code value="CodeableConcept" /> </type> <type> <code value="Quantity" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Basic.extension:characteristic.url"> <path value="Basic.extension.url" /> <representation value="xmlAttr" /> <short value="identifies the meaning of the extension" /> <definition value="Source of the definition for the extension code - a logical name or a URL." /> <comment value="The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension." /> <min value="1" /> <max value="1" /> <base> <path value="Extension.url" /> <min value="1" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="uri" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <fixedUri value="https://example.org/fhir/StructureDefinition/NutritionProductCharacteristics" /> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Basic.extension:characteristic.value[x]"> <path value="Basic.extension.value[x]" /> <short value="Value of extension" /> <definition value="Value of extension - must be one of a constrained set of the data types (see [Extensibility](extensibility.html) for a list)." /> <min value="0" /> <max value="0" /> <base> <path value="Extension.value[x]" /> <min value="0" /> <max value="1" /> </base> <type> <code value="base64Binary" /> </type> <type> <code value="boolean" /> </type> <type> <code value="canonical" /> </type> <type> <code value="code" /> </type> <type> <code value="date" /> </type> <type> <code value="dateTime" /> </type> <type> <code value="decimal" /> </type> <type> <code value="id" /> </type> <type> <code value="instant" /> </type> <type> <code value="integer" /> </type> <type> <code value="markdown" /> </type> <type> <code value="oid" /> </type> <type> <code value="positiveInt" /> </type> <type> <code value="string" /> </type> <type> <code value="time" /> </type> <type> <code value="unsignedInt" /> </type> <type> <code value="uri" /> </type> <type> <code value="url" /> </type> <type> <code value="uuid" /> </type> <type> <code value="Address" /> </type> <type> <code value="Age" /> </type> <type> <code value="Annotation" /> </type> <type> <code value="Attachment" /> </type> <type> <code value="CodeableConcept" /> </type> <type> <code value="Coding" /> </type> <type> <code value="ContactPoint" /> </type> <type> <code value="Count" /> </type> <type> <code value="Distance" /> </type> <type> <code value="Duration" /> </type> <type> <code value="HumanName" /> </type> <type> <code value="Identifier" /> </type> <type> <code value="Money" /> </type> <type> <code value="Period" /> </type> <type> <code value="Quantity" /> </type> <type> <code value="Range" /> </type> <type> <code value="Ratio" /> </type> <type> <code value="Reference" /> </type> <type> <code value="SampledData" /> </type> <type> <code value="Signature" /> </type> <type> <code value="Timing" /> </type> <type> <code value="ContactDetail" /> </type> <type> <code value="Contributor" /> </type> <type> <code value="DataRequirement" /> </type> <type> <code value="Expression" /> </type> <type> <code value="ParameterDefinition" /> </type> <type> <code value="RelatedArtifact" /> </type> <type> <code value="TriggerDefinition" /> </type> <type> <code value="UsageContext" /> </type> <type> <code value="Dosage" /> </type> <type> <code value="Meta" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Basic.extension:ingredient"> <path value="Basic.extension" /> <sliceName value="ingredient" /> <short value="Ingredients contained in this product" /> <definition value="All nutrients (specified as Nutrition Prodicts) and their strengths System URL fr all units of measurement: [https://mpd.noma.no/codesystem/units-of-measurement](https://mpd.noma.no/codesystem/units-of-measurement)" /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="DomainResource.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> <profile value="https://example.org/fhir/StructureDefinition/NutritionIngredient" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <isModifier value="false" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Basic.extension:ingredient.id"> <path value="Basic.extension.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Basic.extension:ingredient.extension"> <path value="Basic.extension.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Basic.extension:ingredient.extension:amount"> <path value="Basic.extension.extension" /> <sliceName value="amount" /> <short value="The" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Basic.extension:ingredient.extension:amount.id"> <path value="Basic.extension.extension.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Basic.extension:ingredient.extension:amount.extension"> <path value="Basic.extension.extension.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="0" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Basic.extension:ingredient.extension:amount.url"> <path value="Basic.extension.extension.url" /> <representation value="xmlAttr" /> <short value="identifies the meaning of the extension" /> <definition value="Source of the definition for the extension code - a logical name or a URL." /> <comment value="The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension." /> <min value="1" /> <max value="1" /> <base> <path value="Extension.url" /> <min value="1" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="uri" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <fixedUri value="amount" /> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Basic.extension:ingredient.extension:amount.value[x]"> <path value="Basic.extension.extension.value[x]" /> <short value="Value of extension" /> <definition value="Value of extension - must be one of a constrained set of the data types (see [Extensibility](extensibility.html) for a list)." /> <min value="0" /> <max value="1" /> <base> <path value="Extension.value[x]" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Ratio" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Basic.extension:ingredient.extension:amount.value[x].id"> <path value="Basic.extension.extension.value[x].id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Basic.extension:ingredient.extension:amount.value[x].extension"> <path value="Basic.extension.extension.value[x].extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Basic.extension:ingredient.extension:amount.value[x].numerator"> <path value="Basic.extension.extension.value[x].numerator" /> <short value="Numerator value" /> <definition value="The value of the numerator." /> <comment value="The context of use may frequently define what kind of quantity this is and therefore what kind of units can be used. The context of use may also restrict the values for the comparator." /> <min value="0" /> <max value="1" /> <base> <path value="Ratio.numerator" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Quantity" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="qty-3" /> <severity value="error" /> <human value="If a code for the unit is present, the system SHALL also be present" /> <expression value="code.empty() or system.exists()" /> <xpath value="not(exists(f:code)) or exists(f:system)" /> <source value="http://hl7.org/fhir/StructureDefinition/Quantity" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="SN (see also Range) or CQ" /> </mapping> <mapping> <identity value="rim" /> <map value="PQ, IVL<PQ>, MO, CO, depending on the values" /> </mapping> <mapping> <identity value="rim" /> <map value=".numerator" /> </mapping> </element> <element id="Basic.extension:ingredient.extension:amount.value[x].numerator.id"> <path value="Basic.extension.extension.value[x].numerator.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Basic.extension:ingredient.extension:amount.value[x].numerator.extension"> <path value="Basic.extension.extension.value[x].numerator.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Basic.extension:ingredient.extension:amount.value[x].numerator.value"> <path value="Basic.extension.extension.value[x].numerator.value" /> <short value="Numerical value (with implicit precision)" /> <definition value="The value of the measured amount. The value includes an implicit precision in the presentation of the value." /> <comment value="The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books)." /> <requirements value="Precision is handled implicitly in almost all cases of measurement." /> <min value="0" /> <max value="1" /> <base> <path value="Quantity.value" /> <min value="0" /> <max value="1" /> </base> <type> <code value="decimal" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="SN.2 / CQ - N/A" /> </mapping> <mapping> <identity value="rim" /> <map value="PQ.value, CO.value, MO.value, IVL.high or IVL.low depending on the value" /> </mapping> </element> <element id="Basic.extension:ingredient.extension:amount.value[x].numerator.comparator"> <path value="Basic.extension.extension.value[x].numerator.comparator" /> <short value="< | <= | >= | > - how to understand the value" /> <definition value="How the value should be understood and represented - whether the actual value is greater or less than the stated value due to measurement issues; e.g. if the comparator is "<" , then the real value is < stated value." /> <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" /> <requirements value="Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology." /> <min value="0" /> <max value="0" /> <base> <path value="Quantity.comparator" /> <min value="0" /> <max value="1" /> </base> <type> <code value="code" /> </type> <meaningWhenMissing value="If there is no comparator, then there is no modification of the value" /> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isModifier value="true" /> <isModifierReason value="This is labeled as "Is Modifier" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value" /> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="QuantityComparator" /> </extension> <strength value="required" /> <description value="How the Quantity should be understood and represented." /> <valueSet value="http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="SN.1 / CQ.1" /> </mapping> <mapping> <identity value="rim" /> <map value="IVL properties" /> </mapping> </element> <element id="Basic.extension:ingredient.extension:amount.value[x].numerator.unit"> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable"> <valueBoolean value="true" /> </extension> <path value="Basic.extension.extension.value[x].numerator.unit" /> <short value="Unit representation" /> <definition value="A human-readable form of the unit." /> <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" /> <requirements value="There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms." /> <min value="0" /> <max value="1" /> <base> <path value="Quantity.unit" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="(see OBX.6 etc.) / CQ.2" /> </mapping> <mapping> <identity value="rim" /> <map value="PQ.unit" /> </mapping> </element> <element id="Basic.extension:ingredient.extension:amount.value[x].numerator.system"> <path value="Basic.extension.extension.value[x].numerator.system" /> <short value="System that defines coded unit form" /> <definition value="The identification of the system that provides the coded form of the unit. System URL: [https://mpd.noma.no/codesystem/units-of-measurement](https://mpd.noma.no/codesystem/units-of-measurement)" /> <comment value="see http://en.wikipedia.org/wiki/Uniform_resource_identifier" /> <requirements value="Need to know the system that defines the coded form of the unit." /> <min value="0" /> <max value="1" /> <base> <path value="Quantity.system" /> <min value="0" /> <max value="1" /> </base> <type> <code value="uri" /> </type> <condition value="ele-1" /> <condition value="qty-3" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="(see OBX.6 etc.) / CQ.2" /> </mapping> <mapping> <identity value="rim" /> <map value="CO.codeSystem, PQ.translation.codeSystem" /> </mapping> </element> <element id="Basic.extension:ingredient.extension:amount.value[x].numerator.code"> <path value="Basic.extension.extension.value[x].numerator.code" /> <short value="Coded form of the unit" /> <definition value="A computer processable form of the unit in some unit representation system." /> <comment value="The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system." /> <requirements value="Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest." /> <min value="0" /> <max value="1" /> <base> <path value="Quantity.code" /> <min value="0" /> <max value="1" /> </base> <type> <code value="code" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="(see OBX.6 etc.) / CQ.2" /> </mapping> <mapping> <identity value="rim" /> <map value="PQ.code, MO.currency, PQ.translation.code" /> </mapping> </element> <element id="Basic.extension:ingredient.extension:amount.value[x].denominator"> <path value="Basic.extension.extension.value[x].denominator" /> <short value="Denominator value" /> <definition value="The value of the denominator." /> <comment value="The context of use may frequently define what kind of quantity this is and therefore what kind of units can be used. The context of use may also restrict the values for the comparator." /> <min value="0" /> <max value="1" /> <base> <path value="Ratio.denominator" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Quantity" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="qty-3" /> <severity value="error" /> <human value="If a code for the unit is present, the system SHALL also be present" /> <expression value="code.empty() or system.exists()" /> <xpath value="not(exists(f:code)) or exists(f:system)" /> <source value="http://hl7.org/fhir/StructureDefinition/Quantity" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="SN (see also Range) or CQ" /> </mapping> <mapping> <identity value="rim" /> <map value="PQ, IVL<PQ>, MO, CO, depending on the values" /> </mapping> <mapping> <identity value="rim" /> <map value=".denominator" /> </mapping> </element> <element id="Basic.extension:ingredient.extension:amount.value[x].denominator.id"> <path value="Basic.extension.extension.value[x].denominator.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Basic.extension:ingredient.extension:amount.value[x].denominator.extension"> <path value="Basic.extension.extension.value[x].denominator.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Basic.extension:ingredient.extension:amount.value[x].denominator.value"> <path value="Basic.extension.extension.value[x].denominator.value" /> <short value="Numerical value (with implicit precision)" /> <definition value="The value of the measured amount. The value includes an implicit precision in the presentation of the value." /> <comment value="The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books)." /> <requirements value="Precision is handled implicitly in almost all cases of measurement." /> <min value="0" /> <max value="1" /> <base> <path value="Quantity.value" /> <min value="0" /> <max value="1" /> </base> <type> <code value="decimal" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="SN.2 / CQ - N/A" /> </mapping> <mapping> <identity value="rim" /> <map value="PQ.value, CO.value, MO.value, IVL.high or IVL.low depending on the value" /> </mapping> </element> <element id="Basic.extension:ingredient.extension:amount.value[x].denominator.comparator"> <path value="Basic.extension.extension.value[x].denominator.comparator" /> <short value="< | <= | >= | > - how to understand the value" /> <definition value="How the value should be understood and represented - whether the actual value is greater or less than the stated value due to measurement issues; e.g. if the comparator is "<" , then the real value is < stated value." /> <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" /> <requirements value="Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology." /> <min value="0" /> <max value="0" /> <base> <path value="Quantity.comparator" /> <min value="0" /> <max value="1" /> </base> <type> <code value="code" /> </type> <meaningWhenMissing value="If there is no comparator, then there is no modification of the value" /> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isModifier value="true" /> <isModifierReason value="This is labeled as "Is Modifier" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value" /> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="QuantityComparator" /> </extension> <strength value="required" /> <description value="How the Quantity should be understood and represented." /> <valueSet value="http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="SN.1 / CQ.1" /> </mapping> <mapping> <identity value="rim" /> <map value="IVL properties" /> </mapping> </element> <element id="Basic.extension:ingredient.extension:amount.value[x].denominator.unit"> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable"> <valueBoolean value="true" /> </extension> <path value="Basic.extension.extension.value[x].denominator.unit" /> <short value="Unit representation" /> <definition value="A human-readable form of the unit." /> <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" /> <requirements value="There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms." /> <min value="0" /> <max value="1" /> <base> <path value="Quantity.unit" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="(see OBX.6 etc.) / CQ.2" /> </mapping> <mapping> <identity value="rim" /> <map value="PQ.unit" /> </mapping> </element> <element id="Basic.extension:ingredient.extension:amount.value[x].denominator.system"> <path value="Basic.extension.extension.value[x].denominator.system" /> <short value="System that defines coded unit form" /> <definition value="The identification of the system that provides the coded form of the unit. System URL: [https://mpd.noma.no/codesystem/units-of-measurement](https://mpd.noma.no/codesystem/units-of-measurement)" /> <comment value="see http://en.wikipedia.org/wiki/Uniform_resource_identifier" /> <requirements value="Need to know the system that defines the coded form of the unit." /> <min value="0" /> <max value="1" /> <base> <path value="Quantity.system" /> <min value="0" /> <max value="1" /> </base> <type> <code value="uri" /> </type> <condition value="ele-1" /> <condition value="qty-3" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="(see OBX.6 etc.) / CQ.2" /> </mapping> <mapping> <identity value="rim" /> <map value="CO.codeSystem, PQ.translation.codeSystem" /> </mapping> </element> <element id="Basic.extension:ingredient.extension:amount.value[x].denominator.code"> <path value="Basic.extension.extension.value[x].denominator.code" /> <short value="Coded form of the unit" /> <definition value="A computer processable form of the unit in some unit representation system." /> <comment value="The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system." /> <requirements value="Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest." /> <min value="0" /> <max value="1" /> <base> <path value="Quantity.code" /> <min value="0" /> <max value="1" /> </base> <type> <code value="code" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="(see OBX.6 etc.) / CQ.2" /> </mapping> <mapping> <identity value="rim" /> <map value="PQ.code, MO.currency, PQ.translation.code" /> </mapping> </element> <element id="Basic.extension:ingredient.extension:item"> <path value="Basic.extension.extension" /> <sliceName value="item" /> <short value="Todo" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="1" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Basic.extension:ingredient.extension:item.id"> <path value="Basic.extension.extension.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Basic.extension:ingredient.extension:item.extension"> <path value="Basic.extension.extension.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="0" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Basic.extension:ingredient.extension:item.url"> <path value="Basic.extension.extension.url" /> <representation value="xmlAttr" /> <short value="identifies the meaning of the extension" /> <definition value="Source of the definition for the extension code - a logical name or a URL." /> <comment value="The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension." /> <min value="1" /> <max value="1" /> <base> <path value="Extension.url" /> <min value="1" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="uri" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <fixedUri value="item" /> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Basic.extension:ingredient.extension:item.value[x]"> <path value="Basic.extension.extension.value[x]" /> <short value="Value of extension" /> <definition value="Value of extension - must be one of a constrained set of the data types (see [Extensibility](extensibility.html) for a list)." /> <min value="0" /> <max value="1" /> <base> <path value="Extension.value[x]" /> <min value="0" /> <max value="1" /> </base> <type> <code value="CodeableConcept" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Basic.extension:ingredient.url"> <path value="Basic.extension.url" /> <representation value="xmlAttr" /> <short value="identifies the meaning of the extension" /> <definition value="Source of the definition for the extension code - a logical name or a URL." /> <comment value="The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension." /> <min value="1" /> <max value="1" /> <base> <path value="Extension.url" /> <min value="1" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="uri" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <fixedUri value="https://example.org/fhir/StructureDefinition/NutritionIngredient" /> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Basic.extension:ingredient.value[x]"> <path value="Basic.extension.value[x]" /> <short value="Value of extension" /> <definition value="Value of extension - must be one of a constrained set of the data types (see [Extensibility](extensibility.html) for a list)." /> <min value="0" /> <max value="0" /> <base> <path value="Extension.value[x]" /> <min value="0" /> <max value="1" /> </base> <type> <code value="base64Binary" /> </type> <type> <code value="boolean" /> </type> <type> <code value="canonical" /> </type> <type> <code value="code" /> </type> <type> <code value="date" /> </type> <type> <code value="dateTime" /> </type> <type> <code value="decimal" /> </type> <type> <code value="id" /> </type> <type> <code value="instant" /> </type> <type> <code value="integer" /> </type> <type> <code value="markdown" /> </type> <type> <code value="oid" /> </type> <type> <code value="positiveInt" /> </type> <type> <code value="string" /> </type> <type> <code value="time" /> </type> <type> <code value="unsignedInt" /> </type> <type> <code value="uri" /> </type> <type> <code value="url" /> </type> <type> <code value="uuid" /> </type> <type> <code value="Address" /> </type> <type> <code value="Age" /> </type> <type> <code value="Annotation" /> </type> <type> <code value="Attachment" /> </type> <type> <code value="CodeableConcept" /> </type> <type> <code value="Coding" /> </type> <type> <code value="ContactPoint" /> </type> <type> <code value="Count" /> </type> <type> <code value="Distance" /> </type> <type> <code value="Duration" /> </type> <type> <code value="HumanName" /> </type> <type> <code value="Identifier" /> </type> <type> <code value="Money" /> </type> <type> <code value="Period" /> </type> <type> <code value="Quantity" /> </type> <type> <code value="Range" /> </type> <type> <code value="Ratio" /> </type> <type> <code value="Reference" /> </type> <type> <code value="SampledData" /> </type> <type> <code value="Signature" /> </type> <type> <code value="Timing" /> </type> <type> <code value="ContactDetail" /> </type> <type> <code value="Contributor" /> </type> <type> <code value="DataRequirement" /> </type> <type> <code value="Expression" /> </type> <type> <code value="ParameterDefinition" /> </type> <type> <code value="RelatedArtifact" /> </type> <type> <code value="TriggerDefinition" /> </type> <type> <code value="UsageContext" /> </type> <type> <code value="Dosage" /> </type> <type> <code value="Meta" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Basic.extension:nutrient"> <path value="Basic.extension" /> <sliceName value="nutrient" /> <short value="Nutrition Product Nutrient" /> <definition value="All nutrients (specified as substances) and their strengths System URL fr all units of measurement: [https://mpd.noma.no/codesystem/units-of-measurement](https://mpd.noma.no/codesystem/units-of-measurement)" /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="DomainResource.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> <profile value="https://example.org/fhir/StructureDefinition/NutritionNutrient" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <isModifier value="false" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Basic.extension:nutrient.id"> <path value="Basic.extension.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Basic.extension:nutrient.extension"> <path value="Basic.extension.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Basic.extension:nutrient.extension:amount"> <path value="Basic.extension.extension" /> <sliceName value="amount" /> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Basic.extension:nutrient.extension:amount.id"> <path value="Basic.extension.extension.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Basic.extension:nutrient.extension:amount.extension"> <path value="Basic.extension.extension.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="0" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Basic.extension:nutrient.extension:amount.url"> <path value="Basic.extension.extension.url" /> <representation value="xmlAttr" /> <short value="identifies the meaning of the extension" /> <definition value="Source of the definition for the extension code - a logical name or a URL." /> <comment value="The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension." /> <min value="1" /> <max value="1" /> <base> <path value="Extension.url" /> <min value="1" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="uri" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <fixedUri value="amount" /> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Basic.extension:nutrient.extension:amount.value[x]"> <path value="Basic.extension.extension.value[x]" /> <short value="Value of extension" /> <definition value="Value of extension - must be one of a constrained set of the data types (see [Extensibility](extensibility.html) for a list)." /> <min value="0" /> <max value="1" /> <base> <path value="Extension.value[x]" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Ratio" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Basic.extension:nutrient.extension:amount.value[x].id"> <path value="Basic.extension.extension.value[x].id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Basic.extension:nutrient.extension:amount.value[x].extension"> <path value="Basic.extension.extension.value[x].extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Basic.extension:nutrient.extension:amount.value[x].numerator"> <path value="Basic.extension.extension.value[x].numerator" /> <short value="Numerator value" /> <definition value="The value of the numerator." /> <comment value="The context of use may frequently define what kind of quantity this is and therefore what kind of units can be used. The context of use may also restrict the values for the comparator." /> <min value="0" /> <max value="1" /> <base> <path value="Ratio.numerator" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Quantity" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="qty-3" /> <severity value="error" /> <human value="If a code for the unit is present, the system SHALL also be present" /> <expression value="code.empty() or system.exists()" /> <xpath value="not(exists(f:code)) or exists(f:system)" /> <source value="http://hl7.org/fhir/StructureDefinition/Quantity" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="SN (see also Range) or CQ" /> </mapping> <mapping> <identity value="rim" /> <map value="PQ, IVL<PQ>, MO, CO, depending on the values" /> </mapping> <mapping> <identity value="rim" /> <map value=".numerator" /> </mapping> </element> <element id="Basic.extension:nutrient.extension:amount.value[x].numerator.id"> <path value="Basic.extension.extension.value[x].numerator.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Basic.extension:nutrient.extension:amount.value[x].numerator.extension"> <path value="Basic.extension.extension.value[x].numerator.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Basic.extension:nutrient.extension:amount.value[x].numerator.value"> <path value="Basic.extension.extension.value[x].numerator.value" /> <short value="Numerical value (with implicit precision)" /> <definition value="The value of the measured amount. The value includes an implicit precision in the presentation of the value." /> <comment value="The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books)." /> <requirements value="Precision is handled implicitly in almost all cases of measurement." /> <min value="0" /> <max value="1" /> <base> <path value="Quantity.value" /> <min value="0" /> <max value="1" /> </base> <type> <code value="decimal" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="SN.2 / CQ - N/A" /> </mapping> <mapping> <identity value="rim" /> <map value="PQ.value, CO.value, MO.value, IVL.high or IVL.low depending on the value" /> </mapping> </element> <element id="Basic.extension:nutrient.extension:amount.value[x].numerator.comparator"> <path value="Basic.extension.extension.value[x].numerator.comparator" /> <short value="< | <= | >= | > - how to understand the value" /> <definition value="How the value should be understood and represented - whether the actual value is greater or less than the stated value due to measurement issues; e.g. if the comparator is "<" , then the real value is < stated value." /> <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" /> <requirements value="Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology." /> <min value="0" /> <max value="0" /> <base> <path value="Quantity.comparator" /> <min value="0" /> <max value="1" /> </base> <type> <code value="code" /> </type> <meaningWhenMissing value="If there is no comparator, then there is no modification of the value" /> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isModifier value="true" /> <isModifierReason value="This is labeled as "Is Modifier" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value" /> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="QuantityComparator" /> </extension> <strength value="required" /> <description value="How the Quantity should be understood and represented." /> <valueSet value="http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="SN.1 / CQ.1" /> </mapping> <mapping> <identity value="rim" /> <map value="IVL properties" /> </mapping> </element> <element id="Basic.extension:nutrient.extension:amount.value[x].numerator.unit"> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable"> <valueBoolean value="true" /> </extension> <path value="Basic.extension.extension.value[x].numerator.unit" /> <short value="Unit representation" /> <definition value="A human-readable form of the unit." /> <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" /> <requirements value="There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms." /> <min value="0" /> <max value="1" /> <base> <path value="Quantity.unit" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="(see OBX.6 etc.) / CQ.2" /> </mapping> <mapping> <identity value="rim" /> <map value="PQ.unit" /> </mapping> </element> <element id="Basic.extension:nutrient.extension:amount.value[x].numerator.system"> <path value="Basic.extension.extension.value[x].numerator.system" /> <short value="System that defines coded unit form" /> <definition value="The identification of the system that provides the coded form of the unit. System URL: [https://mpd.noma.no/codesystem/units-of-measurement](https://mpd.noma.no/codesystem/units-of-measurement)" /> <comment value="see http://en.wikipedia.org/wiki/Uniform_resource_identifier" /> <requirements value="Need to know the system that defines the coded form of the unit." /> <min value="0" /> <max value="1" /> <base> <path value="Quantity.system" /> <min value="0" /> <max value="1" /> </base> <type> <code value="uri" /> </type> <condition value="ele-1" /> <condition value="qty-3" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="(see OBX.6 etc.) / CQ.2" /> </mapping> <mapping> <identity value="rim" /> <map value="CO.codeSystem, PQ.translation.codeSystem" /> </mapping> </element> <element id="Basic.extension:nutrient.extension:amount.value[x].numerator.code"> <path value="Basic.extension.extension.value[x].numerator.code" /> <short value="Coded form of the unit" /> <definition value="A computer processable form of the unit in some unit representation system." /> <comment value="The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system." /> <requirements value="Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest." /> <min value="0" /> <max value="1" /> <base> <path value="Quantity.code" /> <min value="0" /> <max value="1" /> </base> <type> <code value="code" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="(see OBX.6 etc.) / CQ.2" /> </mapping> <mapping> <identity value="rim" /> <map value="PQ.code, MO.currency, PQ.translation.code" /> </mapping> </element> <element id="Basic.extension:nutrient.extension:amount.value[x].denominator"> <path value="Basic.extension.extension.value[x].denominator" /> <short value="Denominator value" /> <definition value="The value of the denominator." /> <comment value="The context of use may frequently define what kind of quantity this is and therefore what kind of units can be used. The context of use may also restrict the values for the comparator." /> <min value="0" /> <max value="1" /> <base> <path value="Ratio.denominator" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Quantity" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="qty-3" /> <severity value="error" /> <human value="If a code for the unit is present, the system SHALL also be present" /> <expression value="code.empty() or system.exists()" /> <xpath value="not(exists(f:code)) or exists(f:system)" /> <source value="http://hl7.org/fhir/StructureDefinition/Quantity" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="SN (see also Range) or CQ" /> </mapping> <mapping> <identity value="rim" /> <map value="PQ, IVL<PQ>, MO, CO, depending on the values" /> </mapping> <mapping> <identity value="rim" /> <map value=".denominator" /> </mapping> </element> <element id="Basic.extension:nutrient.extension:amount.value[x].denominator.id"> <path value="Basic.extension.extension.value[x].denominator.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Basic.extension:nutrient.extension:amount.value[x].denominator.extension"> <path value="Basic.extension.extension.value[x].denominator.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Basic.extension:nutrient.extension:amount.value[x].denominator.value"> <path value="Basic.extension.extension.value[x].denominator.value" /> <short value="Numerical value (with implicit precision)" /> <definition value="The value of the measured amount. The value includes an implicit precision in the presentation of the value." /> <comment value="The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books)." /> <requirements value="Precision is handled implicitly in almost all cases of measurement." /> <min value="0" /> <max value="1" /> <base> <path value="Quantity.value" /> <min value="0" /> <max value="1" /> </base> <type> <code value="decimal" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="SN.2 / CQ - N/A" /> </mapping> <mapping> <identity value="rim" /> <map value="PQ.value, CO.value, MO.value, IVL.high or IVL.low depending on the value" /> </mapping> </element> <element id="Basic.extension:nutrient.extension:amount.value[x].denominator.comparator"> <path value="Basic.extension.extension.value[x].denominator.comparator" /> <short value="< | <= | >= | > - how to understand the value" /> <definition value="How the value should be understood and represented - whether the actual value is greater or less than the stated value due to measurement issues; e.g. if the comparator is "<" , then the real value is < stated value." /> <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" /> <requirements value="Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology." /> <min value="0" /> <max value="0" /> <base> <path value="Quantity.comparator" /> <min value="0" /> <max value="1" /> </base> <type> <code value="code" /> </type> <meaningWhenMissing value="If there is no comparator, then there is no modification of the value" /> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isModifier value="true" /> <isModifierReason value="This is labeled as "Is Modifier" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value" /> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="QuantityComparator" /> </extension> <strength value="required" /> <description value="How the Quantity should be understood and represented." /> <valueSet value="http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="SN.1 / CQ.1" /> </mapping> <mapping> <identity value="rim" /> <map value="IVL properties" /> </mapping> </element> <element id="Basic.extension:nutrient.extension:amount.value[x].denominator.unit"> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable"> <valueBoolean value="true" /> </extension> <path value="Basic.extension.extension.value[x].denominator.unit" /> <short value="Unit representation" /> <definition value="A human-readable form of the unit." /> <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" /> <requirements value="There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms." /> <min value="0" /> <max value="1" /> <base> <path value="Quantity.unit" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="(see OBX.6 etc.) / CQ.2" /> </mapping> <mapping> <identity value="rim" /> <map value="PQ.unit" /> </mapping> </element> <element id="Basic.extension:nutrient.extension:amount.value[x].denominator.system"> <path value="Basic.extension.extension.value[x].denominator.system" /> <short value="System that defines coded unit form" /> <definition value="The identification of the system that provides the coded form of the unit. System URL: [https://mpd.noma.no/codesystem/units-of-measurement](https://mpd.noma.no/codesystem/units-of-measurement)" /> <comment value="see http://en.wikipedia.org/wiki/Uniform_resource_identifier" /> <requirements value="Need to know the system that defines the coded form of the unit." /> <min value="0" /> <max value="1" /> <base> <path value="Quantity.system" /> <min value="0" /> <max value="1" /> </base> <type> <code value="uri" /> </type> <condition value="ele-1" /> <condition value="qty-3" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="(see OBX.6 etc.) / CQ.2" /> </mapping> <mapping> <identity value="rim" /> <map value="CO.codeSystem, PQ.translation.codeSystem" /> </mapping> </element> <element id="Basic.extension:nutrient.extension:amount.value[x].denominator.code"> <path value="Basic.extension.extension.value[x].denominator.code" /> <short value="Coded form of the unit" /> <definition value="A computer processable form of the unit in some unit representation system." /> <comment value="The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system." /> <requirements value="Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest." /> <min value="0" /> <max value="1" /> <base> <path value="Quantity.code" /> <min value="0" /> <max value="1" /> </base> <type> <code value="code" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="(see OBX.6 etc.) / CQ.2" /> </mapping> <mapping> <identity value="rim" /> <map value="PQ.code, MO.currency, PQ.translation.code" /> </mapping> </element> <element id="Basic.extension:nutrient.extension:item"> <path value="Basic.extension.extension" /> <sliceName value="item" /> <short value="Todo" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="1" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Basic.extension:nutrient.extension:item.id"> <path value="Basic.extension.extension.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="Basic.extension:nutrient.extension:item.extension"> <path value="Basic.extension.extension.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="0" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Basic.extension:nutrient.extension:item.url"> <path value="Basic.extension.extension.url" /> <representation value="xmlAttr" /> <short value="identifies the meaning of the extension" /> <definition value="Source of the definition for the extension code - a logical name or a URL." /> <comment value="The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension." /> <min value="1" /> <max value="1" /> <base> <path value="Extension.url" /> <min value="1" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="uri" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <fixedUri value="item" /> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Basic.extension:nutrient.extension:item.value[x]"> <path value="Basic.extension.extension.value[x]" /> <short value="Value of extension" /> <definition value="Value of extension - must be one of a constrained set of the data types (see [Extensibility](extensibility.html) for a list)." /> <min value="0" /> <max value="1" /> <base> <path value="Extension.value[x]" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Reference" /> <targetProfile value="https://example.org/fhir/StructureDefinition/2.0.0/SubstanceSpecificationNOMA" /> <aggregation value="referenced" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Basic.extension:nutrient.url"> <path value="Basic.extension.url" /> <representation value="xmlAttr" /> <short value="identifies the meaning of the extension" /> <definition value="Source of the definition for the extension code - a logical name or a URL." /> <comment value="The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension." /> <min value="1" /> <max value="1" /> <base> <path value="Extension.url" /> <min value="1" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="uri" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <fixedUri value="https://example.org/fhir/StructureDefinition/NutritionNutrient" /> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Basic.extension:nutrient.value[x]"> <path value="Basic.extension.value[x]" /> <short value="Value of extension" /> <definition value="Value of extension - must be one of a constrained set of the data types (see [Extensibility](extensibility.html) for a list)." /> <min value="0" /> <max value="0" /> <base> <path value="Extension.value[x]" /> <min value="0" /> <max value="1" /> </base> <type> <code value="base64Binary" /> </type> <type> <code value="boolean" /> </type> <type> <code value="canonical" /> </type> <type> <code value="code" /> </type> <type> <code value="date" /> </type> <type> <code value="dateTime" /> </type> <type> <code value="decimal" /> </type> <type> <code value="id" /> </type> <type> <code value="instant" /> </type> <type> <code value="integer" /> </type> <type> <code value="markdown" /> </type> <type> <code value="oid" /> </type> <type> <code value="positiveInt" /> </type> <type> <code value="string" /> </type> <type> <code value="time" /> </type> <type> <code value="unsignedInt" /> </type> <type> <code value="uri" /> </type> <type> <code value="url" /> </type> <type> <code value="uuid" /> </type> <type> <code value="Address" /> </type> <type> <code value="Age" /> </type> <type> <code value="Annotation" /> </type> <type> <code value="Attachment" /> </type> <type> <code value="CodeableConcept" /> </type> <type> <code value="Coding" /> </type> <type> <code value="ContactPoint" /> </type> <type> <code value="Count" /> </type> <type> <code value="Distance" /> </type> <type> <code value="Duration" /> </type> <type> <code value="HumanName" /> </type> <type> <code value="Identifier" /> </type> <type> <code value="Money" /> </type> <type> <code value="Period" /> </type> <type> <code value="Quantity" /> </type> <type> <code value="Range" /> </type> <type> <code value="Ratio" /> </type> <type> <code value="Reference" /> </type> <type> <code value="SampledData" /> </type> <type> <code value="Signature" /> </type> <type> <code value="Timing" /> </type> <type> <code value="ContactDetail" /> </type> <type> <code value="Contributor" /> </type> <type> <code value="DataRequirement" /> </type> <type> <code value="Expression" /> </type> <type> <code value="ParameterDefinition" /> </type> <type> <code value="RelatedArtifact" /> </type> <type> <code value="TriggerDefinition" /> </type> <type> <code value="UsageContext" /> </type> <type> <code value="Dosage" /> </type> <type> <code value="Meta" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Basic.modifierExtension"> <path value="Basic.modifierExtension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Extensions that cannot be ignored" /> <definition value="May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself)." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <requirements value="Modifier extensions allow for extensions that *cannot* be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the [definition of modifier extensions](extensibility.html#modifierExtension)." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="DomainResource.modifierExtension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <isModifier value="true" /> <isModifierReason value="Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="Basic.identifier"> <path value="Basic.identifier" /> <label value="nomaNutritionProductID" /> <short value="nomaNutritionProductID" /> <definition value="Equal to the element (nutrition product)'s ID, specific to NoMA's FHIR API Url (preliminary): http://legemiddelverket.no/fhir/SAFEST/SafestNutritionProductID" /> <min value="1" /> <max value="1" /> <base> <path value="Basic.identifier" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Identifier" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CX / EI (occasionally, more often EI maps to a resource id or a URL)" /> </mapping> <mapping> <identity value="rim" /> <map value="II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT]" /> </mapping> <mapping> <identity value="servd" /> <map value="Identifier" /> </mapping> <mapping> <identity value="w5" /> <map value="FiveWs.identifier" /> </mapping> <mapping> <identity value="rim" /> <map value="./identifier" /> </mapping> </element> <element id="Basic.code"> <path value="Basic.code" /> <short value="A code that can identify the detailed nutrients and ingredients in a specific food product" /> <definition value="The code assigned to the product, for example a USDA NDB number, a USDA FDC ID number, or a Langual code." /> <comment value="Because resource references will only be able to indicate 'Basic', the type of reference will need to be specified in a Profile identified as part of the resource. Refer to the resource notes section for information on appropriate terminologies for this code. This element is labeled as a modifier because it defines the meaning of the resource and cannot be ignored." /> <requirements value="Must be able to distinguish different types of Basic resources." /> <min value="1" /> <max value="1" /> <base> <path value="Basic.code" /> <min value="1" /> <max value="1" /> </base> <type> <code value="CodeableConcept" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isModifier value="true" /> <isModifierReason value="This element determines what kind of resource is being represented which drives the meaning of all of the other elements." /> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="BasicResourceType" /> </extension> <strength value="example" /> <description value="Codes for identifying types of resources not yet defined by FHIR." /> <valueSet value="http://hl7.org/fhir/ValueSet/basic-resource-type" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CE/CNE/CWE" /> </mapping> <mapping> <identity value="rim" /> <map value="CD" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:CodeableConcept rdfs:subClassOf dt:CD" /> </mapping> <mapping> <identity value="w5" /> <map value="FiveWs.what[x]" /> </mapping> <mapping> <identity value="rim" /> <map value="./code" /> </mapping> </element> <element id="Basic.subject"> <path value="Basic.subject" /> <short value="Identifies the focus of this resource" /> <definition value="Identifies the patient, practitioner, device or any other resource that is the "focus" of this resource." /> <comment value="Optional as not all potential resources will have subjects. Resources associated with multiple subjects can handle this via extension." /> <requirements value="Needed for partitioning the resource by Patient." /> <min value="0" /> <max value="0" /> <base> <path value="Basic.subject" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Reference" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Resource" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ref-1" /> <severity value="error" /> <human value="SHALL have a contained resource if a local reference is provided" /> <expression value="reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))" /> <xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Reference" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" /> </mapping> <mapping> <identity value="w5" /> <map value="FiveWs.subject[x]" /> </mapping> <mapping> <identity value="rim" /> <map value="./participation[typeCode='SBJ'] (possibly through a ControlAct and Role)" /> </mapping> <mapping> <identity value="w5" /> <map value="FiveWs.subject" /> </mapping> </element> <element id="Basic.created"> <path value="Basic.created" /> <short value="When created" /> <definition value="Identifies when the resource was first created." /> <requirements value="Allows ordering resource instances by time." /> <min value="0" /> <max value="0" /> <base> <path value="Basic.created" /> <min value="0" /> <max value="1" /> </base> <type> <code value="date" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="w5" /> <map value="FiveWs.recorded" /> </mapping> <mapping> <identity value="rim" /> <map value="./participation[typeCode='AUT']/time (possibly through a ControlAct and Role)" /> </mapping> </element> <element id="Basic.author"> <path value="Basic.author" /> <short value="Who created" /> <definition value="Indicates who was responsible for creating the resource instance." /> <comment value="References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository." /> <requirements value="Needed for partitioning the resource." /> <min value="0" /> <max value="0" /> <base> <path value="Basic.author" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Reference" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Practitioner" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/PractitionerRole" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Patient" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/RelatedPerson" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Organization" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ref-1" /> <severity value="error" /> <human value="SHALL have a contained resource if a local reference is provided" /> <expression value="reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))" /> <xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Reference" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" /> </mapping> <mapping> <identity value="w5" /> <map value="FiveWs.author" /> </mapping> <mapping> <identity value="rim" /> <map value="./participation[typeCode='SUB'] (possibly through a ControlAct and Role)" /> </mapping> </element> </snapshot> <differential> <element id="Basic.extension"> <path value="Basic.extension" /> <slicing> <ordered value="false" /> <rules value="open" /> </slicing> <min value="2" /> </element> <element id="Basic.extension:routeOfAdministration"> <path value="Basic.extension" /> <sliceName value="routeOfAdministration" /> <definition value="The route of administration of a nutrition product, usingthe SPOR RMS code system ["Routes and Methods of Administration"](https://spor.ema.europa.eu/rmswi/#/lists/100000073345/terms) Examples: Intraosseous use, Epilesional use Url: [https://mpd.noma.no/structuredefinition/routes-and-methods-of-administration-nutrition](https://mpd.noma.no/structuredefinition/routes-and-methods-of-administration-nutrition)" /> <min value="1" /> <type> <code value="Extension" /> <profile value="https://example.org/fhir/StructureDefinition/RouteOfAdministrationNutrition" /> </type> <isModifier value="false" /> </element> <element id="Basic.extension:routeOfAdministration.value[x]"> <path value="Basic.extension.value[x]" /> <binding> <strength value="required" /> <description value="Noma FHIR API RouteOfAdministration Code System" /> <valueSet value="https://simplifier.net/safest/routeOfAdministration-safest" /> </binding> </element> <element id="Basic.extension:status"> <path value="Basic.extension" /> <sliceName value="status" /> <short value="Publishing status of the NutritionProduct" /> <definition value="Publishing status of the NutritionProduct, mandatory in FHIR R5. Only NutritionProducts with status "active" are published. System URL: [https://mpd.noma.no/structuredefinition/nutrition-product-status](https://mpd.noma.no/structuredefinition/nutrition-product-status)" /> <type> <code value="Extension" /> <profile value="https://example.org/fhir/StructureDefinition/NutritionStatus" /> </type> <isModifier value="false" /> </element> <element id="Basic.extension:status.value[x]"> <path value="Basic.extension.value[x]" /> <short value="Status will always be active." /> <fixedCode value="active" /> </element> <element id="Basic.extension:for"> <path value="Basic.extension" /> <sliceName value="for" /> <short value="Relationship to a (virtual) medicinal product element." /> <definition value="Many nutrition products are marketed with small variatoins of properties not significant for their physionlogical effect, such as flavor. To be able to group these nutrition products, a relationship to a medicinal product was established. In this case, the related medicinal product contains a flag indicating that it is grouping nutrition priducts and not represetning an authorised medicinal product." /> <type> <code value="Extension" /> <profile value="https://example.org/fhir/StructureDefinition/NutritionProductForMedicinalProduct" /> </type> <isModifier value="false" /> </element> <element id="Basic.extension:for.value[x]"> <path value="Basic.extension.value[x]" /> <short value="Todo" /> </element> <element id="Basic.extension:knownAllergen"> <path value="Basic.extension" /> <sliceName value="knownAllergen" /> <short value="Known or suspected allergens that are a part of this product" /> <type> <code value="Extension" /> <profile value="https://example.org/fhir/StructureDefinition/NutritionProductKnownAllergen" /> </type> <isModifier value="false" /> </element> <element id="Basic.extension:characteristic"> <path value="Basic.extension" /> <sliceName value="characteristic" /> <short value="Specifies descriptive properties of the nutrition product" /> <definition value="This extension contains information on nutrition charactiristics such as pH and energy (calories). The different nutrition characteristic types is published as a the [Nutrition Characteristic Type](https://simplifier.net/guide/Implementation-guide-for-NoMA-s-FHIR-API-2.0.0/Home/Code-Systems/Nutrition/Nutrition-Characteristic-Type.page.md?version=current) Code System: | Type NO | Type EN | Definition | Value examples | Type | | :------- | :------ | :------ | | Smak | Flavour | The flavour of the nutrition product | med jordbærsmak, med nøytral smak | Code System [Smak (flavour)](https://simplifier.net/guide/Implementation-guide-for-NoMA-s-FHIR-API-2.0.0/Home/Code-Systems/Nutrition/Smak-Flavour.page.md?version=current) | | pH | pH | The pH of the nutrition product | 7,0 | String | | Osmolaritet | Osmolarity | The total concentration of all dissolved particles (solutes) in a solution, measured in osmoles per liter (Osm/L) | 300 mosmol/kg | String | | Osmolalitet | Osmolality | The concentration of solute particles (like salts, glucose, urea) per kilogram of solvent (usually water) in a solution| 1550 mosmol/kg | String | | Konsentrasjon* | Concentration* | Concentration of a type of content such as fat or energy per unit | 97 kcal | Quantity | *Concentration can relate to - energy (kcal) - energy (kJ) - lipides - carbohydrates - water - fiber - protein - amino acids - nitrogen Code system URLs used: Nutrition Characteristics Type: [https://mpd.noma.no/codesystem/nutrition-characteristic-type](https://mpd.noma.no/codesystem/nutrition-characteristic-type) Smak: [https://mpd.noma.no/codesystem/smak](https://mpd.noma.no/codesystem/smak)" /> <type> <code value="Extension" /> <profile value="https://example.org/fhir/StructureDefinition/NutritionProductCharacteristics" /> </type> <isModifier value="false" /> </element> <element id="Basic.extension:characteristic.extension:type"> <path value="Basic.extension.extension" /> <sliceName value="type" /> <short value="The type of Nutrition Product Characteristic" /> <definition value="System URL: [https://mpd.noma.no/codesystem/nutrition-characteristic-type](https://mpd.noma.no/codesystem/nutrition-characteristic-type)" /> </element> <element id="Basic.extension:characteristic.extension:value"> <path value="Basic.extension.extension" /> <sliceName value="value" /> <short value="The value of the Nutrition Product Characteristic" /> <definition value="System URLs used: Smak: [https://mpd.noma.no/codesystem/smak](https://mpd.noma.no/codesystem/smak)" /> </element> <element id="Basic.extension:ingredient"> <path value="Basic.extension" /> <sliceName value="ingredient" /> <short value="Ingredients contained in this product" /> <definition value="All nutrients (specified as Nutrition Prodicts) and their strengths System URL fr all units of measurement: [https://mpd.noma.no/codesystem/units-of-measurement](https://mpd.noma.no/codesystem/units-of-measurement)" /> <type> <code value="Extension" /> <profile value="https://example.org/fhir/StructureDefinition/NutritionIngredient" /> </type> <isModifier value="false" /> </element> <element id="Basic.extension:ingredient.extension:amount"> <path value="Basic.extension.extension" /> <sliceName value="amount" /> <short value="The" /> </element> <element id="Basic.extension:ingredient.extension:amount.value[x].numerator.comparator"> <path value="Basic.extension.extension.value[x].numerator.comparator" /> <max value="0" /> </element> <element id="Basic.extension:ingredient.extension:amount.value[x].numerator.system"> <path value="Basic.extension.extension.value[x].numerator.system" /> <definition value="The identification of the system that provides the coded form of the unit. System URL: [https://mpd.noma.no/codesystem/units-of-measurement](https://mpd.noma.no/codesystem/units-of-measurement)" /> </element> <element id="Basic.extension:ingredient.extension:amount.value[x].denominator.comparator"> <path value="Basic.extension.extension.value[x].denominator.comparator" /> <max value="0" /> </element> <element id="Basic.extension:ingredient.extension:amount.value[x].denominator.system"> <path value="Basic.extension.extension.value[x].denominator.system" /> <definition value="The identification of the system that provides the coded form of the unit. System URL: [https://mpd.noma.no/codesystem/units-of-measurement](https://mpd.noma.no/codesystem/units-of-measurement)" /> </element> <element id="Basic.extension:ingredient.extension:item"> <path value="Basic.extension.extension" /> <sliceName value="item" /> <short value="Todo" /> </element> <element id="Basic.extension:nutrient"> <path value="Basic.extension" /> <sliceName value="nutrient" /> <short value="Nutrition Product Nutrient" /> <definition value="All nutrients (specified as substances) and their strengths System URL fr all units of measurement: [https://mpd.noma.no/codesystem/units-of-measurement](https://mpd.noma.no/codesystem/units-of-measurement)" /> <type> <code value="Extension" /> <profile value="https://example.org/fhir/StructureDefinition/NutritionNutrient" /> </type> <isModifier value="false" /> </element> <element id="Basic.extension:nutrient.extension:amount"> <path value="Basic.extension.extension" /> <sliceName value="amount" /> </element> <element id="Basic.extension:nutrient.extension:amount.value[x].numerator.comparator"> <path value="Basic.extension.extension.value[x].numerator.comparator" /> <max value="0" /> </element> <element id="Basic.extension:nutrient.extension:amount.value[x].numerator.system"> <path value="Basic.extension.extension.value[x].numerator.system" /> <definition value="The identification of the system that provides the coded form of the unit. System URL: [https://mpd.noma.no/codesystem/units-of-measurement](https://mpd.noma.no/codesystem/units-of-measurement)" /> </element> <element id="Basic.extension:nutrient.extension:amount.value[x].denominator.comparator"> <path value="Basic.extension.extension.value[x].denominator.comparator" /> <max value="0" /> </element> <element id="Basic.extension:nutrient.extension:amount.value[x].denominator.system"> <path value="Basic.extension.extension.value[x].denominator.system" /> <definition value="The identification of the system that provides the coded form of the unit. System URL: [https://mpd.noma.no/codesystem/units-of-measurement](https://mpd.noma.no/codesystem/units-of-measurement)" /> </element> <element id="Basic.extension:nutrient.extension:item"> <path value="Basic.extension.extension" /> <sliceName value="item" /> <short value="Todo" /> </element> <element id="Basic.identifier"> <path value="Basic.identifier" /> <label value="nomaNutritionProductID" /> <short value="nomaNutritionProductID" /> <definition value="Equal to the element (nutrition product)'s ID, specific to NoMA's FHIR API Url (preliminary): http://legemiddelverket.no/fhir/SAFEST/SafestNutritionProductID" /> <min value="1" /> <max value="1" /> </element> <element id="Basic.code"> <path value="Basic.code" /> <short value="A code that can identify the detailed nutrients and ingredients in a specific food product" /> <definition value="The code assigned to the product, for example a USDA NDB number, a USDA FDC ID number, or a Langual code." /> </element> <element id="Basic.subject"> <path value="Basic.subject" /> <max value="0" /> </element> <element id="Basic.created"> <path value="Basic.created" /> <max value="0" /> </element> <element id="Basic.author"> <path value="Basic.author" /> <max value="0" /> </element> </differential> </StructureDefinition>