No narrative is provided for definitional resources. A human-readable rendering can be found in the implementation guide(s) where this resource is used.
 <status value="draft" /> <publisher value="Nictiz" /> <contact> <name value="Nictiz" /> <telecom> <system value="url" /> <value value="https://www.nictiz.nl" /> <use value="work" /> </telecom> </contact> <description value="An allergy or intolerance describes a patient’s tendency towards hypersensitivity to a certain substance, so that an unwanted physiological reaction is expected after exposure to the substance, while most people would not exhibit such a reaction to that amount. The observed physiological changes are usually the result of an immunological reaction. The substances can be categorized as follows: * Medicine * Medicine category * Ingredient/addition * Nutrition * Environmental factor * Animal * Plants * Chemicals * Inhaled allergenic" /> <purpose value="A derived profile from [zib-AllergyIntolerance](http://nictiz.nl/fhir/StructureDefinition/zib-AllergyIntolerance) to provide a version better suited for implementation purposes. This profile augments the base profile with elements found in the various use cases that have adopted the zib." /> <copyright value="Copyright and related rights waived via CC0, https://creativecommons.org/publicdomain/zero/1.0/. This does not apply to information from third parties, for example a medical terminology system. The implementer alone is responsible for identifying and obtaining any necessary licenses or authorizations to utilize third party IP in connection with the specification or otherwise." /> <fhirVersion value="4.0.1" /> <mapping> <identity value="zib-allergyintolerance-v3.3-2020EN" /> <uri value="https://zibs.nl/wiki/AllergyIntolerance-v3.3(2020EN)" /> <name value="zib AllergyIntolerance-v3.3(2020EN)" /> </mapping> <kind value="resource" /> <abstract value="false" /> <type value="AllergyIntolerance" /> <baseDefinition value="http://nictiz.nl/fhir/StructureDefinition/zib-AllergyIntolerance" /> <derivation value="constraint" /> <snapshot> <element id="AllergyIntolerance"> <path value="AllergyIntolerance" /> <short value="AllergyIntolerance" /> <definition value="Risk of harmful or undesirable, physiological response which is unique to an individual and associated with exposure to a substance." /> <comment value="The zib defines certain allergy statuses in the AllergieStatusCodelijst (NL-CM:8.2.5 AllergyStatus). These statuses are represented using both the FHIR elements `AllergyIntolerance.clinicalStatus` and `AllergyIntolerance.verificationStatus`; most of the zib codes map to a `.clinicalStatus` code, but the zib code _nullified_ can only be represented by `.verificationStatus` = _entered-in-error_. For both these FHIR elements, a separate ConceptMap is defined. Although both ConceptMaps include _unmatched_ concepts, together they provide an _equal_ mapping of each AllergieStatusCodelijst concept. Therefore, there's no need to include the zib code using the ext-CodeSpecification extension, as would normally be expected in these situations." /> <alias value="Allergy" /> <alias value="Intolerance" /> <alias value="Adverse Reaction" /> <alias value="AllergieIntolerantie" /> <alias value="nl-core-AllergyIntolerance" /> <min value="0" /> <max value="*" /> <base> <path value="AllergyIntolerance" /> <min value="0" /> <max value="*" /> </base> <constraint> <key value="dom-2" /> <severity value="error" /> <human value="If the resource is contained in another resource, it SHALL NOT contain nested Resources" /> <expression value="contained.contained.empty()" /> <xpath value="not(parent::f:contained and f:contained)" /> <source value="http://hl7.org/fhir/StructureDefinition/DomainResource" /> </constraint> <constraint> <key value="dom-4" /> <severity value="error" /> <human value="If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated" /> <expression value="contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()" /> <xpath value="not(exists(f:contained/*/f:meta/f:versionId)) and not(exists(f:contained/*/f:meta/f:lastUpdated))" /> <source value="http://hl7.org/fhir/StructureDefinition/DomainResource" /> </constraint> <constraint> <key value="dom-3" /> <severity value="error" /> <human value="If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource" /> <expression value="contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty()" /> <xpath value="not(exists(for $id in f:contained/*/f:id/@value return $contained[not(parent::*/descendant::f:reference/@value=concat('#', $contained/*/id/@value) or descendant::f:reference[@value='#'])]))" /> <source value="http://hl7.org/fhir/StructureDefinition/DomainResource" /> </constraint> <constraint> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bestpractice"> <valueBoolean value="true" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bestpractice-explanation"> <valueMarkdown value="When a resource has no narrative, only systems that fully understand the data can display the resource to a human safely. Including a human readable representation in the resource makes for a much more robust eco-system and cheaper handling of resources by intermediary systems. Some ecosystems restrict distribution of resources to only those systems that do fully understand the resources, and as a consequence implementers may believe that the narrative is superfluous. However experience shows that such eco-systems often open up to new participants over time." /> </extension> <key value="dom-6" /> <severity value="warning" /> <human value="A resource should have narrative for robust management" /> <expression value="text.`div`.exists()" /> <xpath value="exists(f:text/h:div)" /> <source value="http://hl7.org/fhir/StructureDefinition/DomainResource" /> </constraint> <constraint> <key value="dom-5" /> <severity value="error" /> <human value="If a resource is contained in another resource, it SHALL NOT have a security label" /> <expression value="contained.meta.security.empty()" /> <xpath value="not(exists(f:contained/*/f:meta/f:security))" /> <source value="http://hl7.org/fhir/StructureDefinition/DomainResource" /> </constraint> <constraint> <key value="ait-1" /> <severity value="error" /> <human value="AllergyIntolerance.clinicalStatus SHALL be present if verificationStatus is not entered-in-error." /> <expression value="verificationStatus.coding.where(system = 'http://terminology.hl7.org/CodeSystem/allergyintolerance-verification' and code = 'entered-in-error').exists() or clinicalStatus.exists()" /> <xpath value="f:verificationStatus/f:coding/f:code/@value='entered-in-error' or exists(f:clinicalStatus)" /> <source value="http://hl7.org/fhir/StructureDefinition/AllergyIntolerance" /> </constraint> <constraint> <key value="ait-2" /> <severity value="error" /> <human value="AllergyIntolerance.clinicalStatus SHALL NOT be present if verification Status is entered-in-error" /> <expression value="verificationStatus.coding.where(system = 'http://terminology.hl7.org/CodeSystem/allergyintolerance-verification' and code = 'entered-in-error').empty() or clinicalStatus.empty()" /> <xpath value="not(f:verificationStatus/f:coding/f:code/@value='entered-in-error') or not(exists(f:clinicalStatus))" /> <source value="http://hl7.org/fhir/StructureDefinition/AllergyIntolerance" /> </constraint> <mapping> <identity value="rim" /> <map value="Entity. Role, or Act" /> </mapping> <mapping> <identity value="rim" /> <map value="Observation[classCode=OBS, moodCode=EVN]" /> </mapping> <mapping> <identity value="zib-allergyintolerance-v3.3-2020EN" /> <map value="NL-CM:8.2.1" /> <comment value="AllergyIntolerance" /> </mapping> </element> <element id="AllergyIntolerance.id"> <path value="AllergyIntolerance.id" /> <short value="Logical id of this artifact" /> <definition value="The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes." /> <comment value="The only time that a resource does not have an id is when it is being submitted to the server using a create operation." /> <min value="0" /> <max value="1" /> <base> <path value="Resource.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <isSummary value="true" /> </element> <element id="AllergyIntolerance.meta"> <path value="AllergyIntolerance.meta" /> <short value="Metadata about the resource" /> <definition value="The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource." /> <min value="0" /> <max value="1" /> <base> <path value="Resource.meta" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Meta" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="AllergyIntolerance.implicitRules"> <path value="AllergyIntolerance.implicitRules" /> <short value="A set of rules under which this content was created" /> <definition value="A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc." /> <comment value="Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc." /> <min value="0" /> <max value="1" /> <base> <path value="Resource.implicitRules" /> <min value="0" /> <max value="1" /> </base> <type> <code value="uri" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isModifier value="true" /> <isModifierReason value="This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="AllergyIntolerance.language"> <path value="AllergyIntolerance.language" /> <short value="Language of the resource content" /> <definition value="The base language in which the resource is written." /> <comment value="Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute)." /> <min value="0" /> <max value="1" /> <base> <path value="Resource.language" /> <min value="0" /> <max value="1" /> </base> <type> <code value="code" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-maxValueSet"> <valueCanonical value="http://hl7.org/fhir/ValueSet/all-languages" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="Language" /> </extension> <strength value="preferred" /> <description value="A human language." /> <valueSet value="http://hl7.org/fhir/ValueSet/languages" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="AllergyIntolerance.text"> <path value="AllergyIntolerance.text" /> <short value="Text summary of the resource, for human interpretation" /> <definition value="A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety." /> <comment value="Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later." /> <alias value="narrative" /> <alias value="html" /> <alias value="xhtml" /> <alias value="display" /> <min value="0" /> <max value="1" /> <base> <path value="DomainResource.text" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Narrative" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> <mapping> <identity value="rim" /> <map value="Act.text?" /> </mapping> </element> <element id="AllergyIntolerance.contained"> <path value="AllergyIntolerance.contained" /> <short value="Contained, inline Resources" /> <definition value="These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope." /> <comment value="This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels." /> <alias value="inline resources" /> <alias value="anonymous resources" /> <alias value="contained resources" /> <min value="0" /> <max value="*" /> <base> <path value="DomainResource.contained" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Resource" /> </type> <mapping> <identity value="rim" /> <map value="Entity. Role, or Act" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="AllergyIntolerance.extension"> <path value="AllergyIntolerance.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="DomainResource.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="AllergyIntolerance.modifierExtension"> <path value="AllergyIntolerance.modifierExtension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Extensions that cannot be ignored" /> <definition value="May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself)." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <requirements value="Modifier extensions allow for extensions that *cannot* be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the [definition of modifier extensions](extensibility.html#modifierExtension)." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="DomainResource.modifierExtension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <isModifier value="true" /> <isModifierReason value="Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="AllergyIntolerance.identifier"> <path value="AllergyIntolerance.identifier" /> <short value="External ids for this item" /> <definition value="Business identifiers assigned to this AllergyIntolerance by the performer or other systems which remain constant as the resource is updated and propagates from server to server." /> <comment value="This is a business identifier, not a resource identifier (see [discussion](resource.html#identifiers)). It is best practice for the identifier to only appear on a single resource instance, however business practices may occasionally dictate that multiple resource instances with the same identifier can exist - possibly even with different resource types. For example, multiple Patient and a Person resource instance might share the same social insurance number." /> <requirements value="Allows identification of the AllergyIntolerance as it is known by various participating systems and in a way that remains consistent across servers." /> <min value="0" /> <max value="*" /> <base> <path value="AllergyIntolerance.identifier" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Identifier" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CX / EI (occasionally, more often EI maps to a resource id or a URL)" /> </mapping> <mapping> <identity value="rim" /> <map value="II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT]" /> </mapping> <mapping> <identity value="servd" /> <map value="Identifier" /> </mapping> <mapping> <identity value="w5" /> <map value="FiveWs.identifier" /> </mapping> <mapping> <identity value="v2" /> <map value="IAM-7" /> </mapping> <mapping> <identity value="rim" /> <map value="id" /> </mapping> </element> <element id="AllergyIntolerance.clinicalStatus"> <path value="AllergyIntolerance.clinicalStatus" /> <short value="AllergyStatus" /> <definition value="Statement on the status of the patient’s hypersensitivity." /> <comment value="See the comment on the root element for guidance on mapping zib AllergyStatus to FHIR." /> <alias value="AllergieStatus" /> <min value="0" /> <max value="1" /> <base> <path value="AllergyIntolerance.clinicalStatus" /> <min value="0" /> <max value="1" /> </base> <type> <code value="CodeableConcept" /> </type> <condition value="ele-1" /> <condition value="ait-1" /> <condition value="ait-2" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isModifier value="true" /> <isModifierReason value="This element is labeled as a modifier because the status contains the codes inactive and resolved that mark the AllergyIntolerance as no longer active." /> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="AllergyIntoleranceClinicalStatus" /> </extension> <strength value="required" /> <description value="Use ConceptMap AllergieStatusCodelijst_to_AllergyIntoleranceClinicalStatusCodes to translate terminology from the functional model to profile terminology in ValueSet AllergyIntoleranceClinicalStatusCodes." /> <valueSet value="http://hl7.org/fhir/ValueSet/allergyintolerance-clinical|4.0.1"> <extension url="http://hl7.org/fhir/StructureDefinition/11179-permitted-value-conceptmap"> <valueCanonical value="http://nictiz.nl/fhir/ConceptMap/AllergieStatusCodelijst-to-AllergyIntoleranceClinicalStatusCodes" /> </extension> </valueSet> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CE/CNE/CWE" /> </mapping> <mapping> <identity value="rim" /> <map value="CD" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:CodeableConcept rdfs:subClassOf dt:CD" /> </mapping> <mapping> <identity value="w5" /> <map value="FiveWs.status" /> </mapping> <mapping> <identity value="rim" /> <map value="Observation ACT .inboundRelationship[typeCode=COMP].source[classCode=OBS, code="clinicalStatus", moodCode=EVN].value" /> </mapping> <mapping> <identity value="zib-allergyintolerance-v3.3-2020EN" /> <map value="NL-CM:8.2.5" /> <comment value="AllergyStatus" /> </mapping> </element> <element id="AllergyIntolerance.verificationStatus"> <path value="AllergyIntolerance.verificationStatus" /> <short value="AllergyStatus" /> <definition value="Statement on the status of the patient’s hypersensitivity." /> <comment value="See the comment on the root element for guidance on mapping zib AllergyStatus to FHIR." /> <alias value="AllergieStatus" /> <min value="0" /> <max value="1" /> <base> <path value="AllergyIntolerance.verificationStatus" /> <min value="0" /> <max value="1" /> </base> <type> <code value="CodeableConcept" /> </type> <condition value="ele-1" /> <condition value="ait-1" /> <condition value="ait-2" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isModifier value="true" /> <isModifierReason value="This element is labeled as a modifier because the status contains the codes refuted and entered-in-error that mark the AllergyIntolerance as not currently valid." /> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="AllergyIntoleranceVerificationStatus" /> </extension> <strength value="required" /> <description value="Use ConceptMap AllergieStatusCodelijst_to_AllergyIntoleranceVerificationStatus to translate terminology from the functional model to profile terminology in ValueSet AllergyIntoleranceVerificationStatusCodes." /> <valueSet value="http://hl7.org/fhir/ValueSet/allergyintolerance-verification|4.0.1"> <extension url="http://hl7.org/fhir/StructureDefinition/11179-permitted-value-conceptmap"> <valueCanonical value="http://nictiz.nl/fhir/ConceptMap/AllergieStatusCodelijst-to-AllergyIntoleranceVerificationStatus" /> </extension> </valueSet> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CE/CNE/CWE" /> </mapping> <mapping> <identity value="rim" /> <map value="CD" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:CodeableConcept rdfs:subClassOf dt:CD" /> </mapping> <mapping> <identity value="w5" /> <map value="FiveWs.status" /> </mapping> <mapping> <identity value="rim" /> <map value="Observation ACT .inboundRelationship[typeCode=COMP].source[classCode=OBS, code="verificationStatus", moodCode=EVN].value" /> </mapping> <mapping> <identity value="zib-allergyintolerance-v3.3-2020EN" /> <map value="NL-CM:8.2.5" /> <comment value="AllergyStatus" /> </mapping> </element> <element id="AllergyIntolerance.type"> <path value="AllergyIntolerance.type" /> <short value="allergy | intolerance - Underlying mechanism (if known)" /> <definition value="Identification of the underlying physiological mechanism for the reaction risk." /> <comment value="Allergic (typically immune-mediated) reactions have been traditionally regarded as an indicator for potential escalation to significant future risk. Contemporary knowledge suggests that some reactions previously thought to be immune-mediated are, in fact, non-immune, but in some cases can still pose a life threatening risk. It is acknowledged that many clinicians might not be in a position to distinguish the mechanism of a particular reaction. Often the term "allergy" is used rather generically and may overlap with the use of "intolerance" - in practice the boundaries between these two concepts might not be well-defined or understood. This data element is included nevertheless, because many legacy systems have captured this attribute. Immunologic testing may provide supporting evidence for the basis of the reaction and the causative substance, but no tests are 100% sensitive or specific for sensitivity to a particular substance. If, as is commonly the case, it is unclear whether the reaction is due to an allergy or an intolerance, then the type element should be omitted from the resource." /> <alias value="Category" /> <alias value="Class" /> <min value="0" /> <max value="1" /> <base> <path value="AllergyIntolerance.type" /> <min value="0" /> <max value="1" /> </base> <type> <code value="code" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="AllergyIntoleranceType" /> </extension> <strength value="required" /> <description value="Identification of the underlying physiological mechanism for a Reaction Risk." /> <valueSet value="http://hl7.org/fhir/ValueSet/allergy-intolerance-type|4.0.1" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="w5" /> <map value="FiveWs.class" /> </mapping> <mapping> <identity value="v2" /> <map value="IAM-9" /> </mapping> <mapping> <identity value="rim" /> <map value="code" /> </mapping> </element> <element id="AllergyIntolerance.category"> <path value="AllergyIntolerance.category" /> <short value="AllergyCategory" /> <definition value="Identifies the allergy category such as medication, food or environment." /> <comment value="This data element has been included because it is currently being captured in some clinical systems. This data can be derived from the substance where coding systems are used, and is effectively redundant in that situation. When searching on category, consider the implications of AllergyIntolerance resources without a category. For example, when searching on category = medication, medication allergies that don't have a category valued will not be returned. Refer to [search](search.html) for more information on how to search category with a :missing modifier to get allergies that don't have a category. Additionally, category should be used with caution because category can be subjective based on the sender." /> <alias value="Category" /> <alias value="Type" /> <alias value="Reaction Type" /> <alias value="Class" /> <alias value="AllergieCategorie" /> <min value="0" /> <max value="1" /> <base> <path value="AllergyIntolerance.category" /> <min value="0" /> <max value="*" /> </base> <type> <code value="code" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="AllergyIntoleranceCategory" /> </extension> <strength value="required" /> <description value="Use ConceptMap AllergieCategorieCodelijst_to_AllergyIntoleranceCategory to translate terminology from the functional model to profile terminology in ValueSet AllergyIntoleranceCategory." /> <valueSet value="http://hl7.org/fhir/ValueSet/allergy-intolerance-category|4.0.1"> <extension url="http://hl7.org/fhir/StructureDefinition/11179-permitted-value-conceptmap"> <valueCanonical value="http://nictiz.nl/fhir/ConceptMap/AllergieCategorieCodelijst-to-AllergyIntoleranceCategory" /> </extension> </valueSet> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="w5" /> <map value="FiveWs.class" /> </mapping> <mapping> <identity value="v2" /> <map value="AL1-2" /> </mapping> <mapping> <identity value="rim" /> <map value="value < IntoleranceValue (Agent)" /> </mapping> <mapping> <identity value="zib-allergyintolerance-v3.3-2020EN" /> <map value="NL-CM:8.2.4" /> <comment value="AllergyCategory" /> </mapping> </element> <element id="AllergyIntolerance.category.id"> <path value="AllergyIntolerance.category.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="AllergyIntolerance.category.extension"> <path value="AllergyIntolerance.category.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="AllergyIntolerance.category.extension:allergyCategoryCodelist"> <path value="AllergyIntolerance.category.extension" /> <sliceName value="allergyCategoryCodelist" /> <short value="Optional Extensions Element" /> <definition value="Optional Extension Element - found in all resources." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="1" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> <profile value="http://nictiz.nl/fhir/StructureDefinition/ext-CodeSpecification" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="AllergyIntolerance.category.extension:allergyCategoryCodelist.id"> <path value="AllergyIntolerance.category.extension.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="AllergyIntolerance.category.extension:allergyCategoryCodelist.extension"> <path value="AllergyIntolerance.category.extension.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="AllergyIntolerance.category.extension:allergyCategoryCodelist.url"> <path value="AllergyIntolerance.category.extension.url" /> <representation value="xmlAttr" /> <short value="identifies the meaning of the extension" /> <definition value="Source of the definition for the extension code - a logical name or a URL." /> <comment value="The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension." /> <min value="1" /> <max value="1" /> <base> <path value="Extension.url" /> <min value="1" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="uri" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <fixedUri value="http://nictiz.nl/fhir/StructureDefinition/ext-CodeSpecification" /> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="AllergyIntolerance.category.extension:allergyCategoryCodelist.value[x]"> <path value="AllergyIntolerance.category.extension.value[x]" /> <short value="AllergyCategory" /> <definition value="Identifies the allergy category such as medication, food or environment." /> <alias value="AllergieCategorie" /> <min value="0" /> <max value="1" /> <base> <path value="Extension.value[x]" /> <min value="0" /> <max value="1" /> </base> <type> <code value="CodeableConcept" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <binding> <strength value="required" /> <valueSet value="http://decor.nictiz.nl/fhir/ValueSet/2.16.840.1.113883.2.4.3.11.60.40.2.8.2.2--20200901000000" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> <mapping> <identity value="zib-allergyintolerance-v3.3-2020EN" /> <map value="NL-CM:8.2.4" /> <comment value="AllergyCategory" /> </mapping> </element> <element id="AllergyIntolerance.category.value"> <path value="AllergyIntolerance.category.value" /> <representation value="xmlAttr" /> <short value="Primitive value for code" /> <definition value="Primitive value for code" /> <min value="0" /> <max value="1" /> <base> <path value="string.value" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="code" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/regex"> <valueString value="[^\s]+(\s[^\s]+)*" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <maxLength value="1048576" /> </element> <element id="AllergyIntolerance.criticality"> <path value="AllergyIntolerance.criticality" /> <short value="Criticality" /> <definition value="Critical extent is defined as “the potential severity of future reactions.” This represents a clinical evaluation of the worst case scenario for a future reaction. It can be based on the severity of past reactions, the dose and manner of exposure which caused reactions in the past, and the life-threatening potential of the type of reaction. Critical extent is a property of the allergy, and not of the reaction itself." /> <comment value="The default criticality value for any propensity to an adverse reaction should be 'Low Risk', indicating at the very least a relative contraindication to deliberate or voluntary exposure to the substance. 'High Risk' is flagged if the clinician has identified a propensity for a more serious or potentially life-threatening reaction, such as anaphylaxis, and implies an absolute contraindication to deliberate or voluntary exposure to the substance. If this element is missing, the criticality is unknown (though it may be known elsewhere). Systems that capture a severity at the condition level are actually representing the concept of criticality whereas the severity documented at the reaction level is representing the true reaction severity. Existing systems that are capturing both condition criticality and reaction severity may use the term "severity" to represent both. Criticality is the worst it could be in the future (i.e. situation-agnostic) whereas severity is situation-dependent." /> <alias value="Severity" /> <alias value="Seriousness" /> <alias value="Contra-indication" /> <alias value="Risk" /> <alias value="MateVanKritiekZijn" /> <min value="0" /> <max value="1" /> <base> <path value="AllergyIntolerance.criticality" /> <min value="0" /> <max value="1" /> </base> <type> <code value="code" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="AllergyIntoleranceCriticality" /> </extension> <strength value="required" /> <description value="Use ConceptMap MateVanKritiekZijnCodelijst_to_AllergyIntoleranceCriticality to translate terminology from the functional model to profile terminology in ValueSet AllergyIntoleranceCriticality." /> <valueSet value="http://hl7.org/fhir/ValueSet/allergy-intolerance-criticality|4.0.1"> <extension url="http://hl7.org/fhir/StructureDefinition/11179-permitted-value-conceptmap"> <valueCanonical value="http://nictiz.nl/fhir/ConceptMap/MateVanKritiekZijnCodelijst-to-AllergyIntoleranceCriticality" /> </extension> </valueSet> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="w5" /> <map value="FiveWs.grade" /> </mapping> <mapping> <identity value="v2" /> <map value="AL1-4" /> </mapping> <mapping> <identity value="rim" /> <map value="inboundRelationship[typeCode=SUBJ].source[classCode=OBS, moodCode=EVN, code=SEV, value <= SeverityObservation (Severity Level)]" /> </mapping> <mapping> <identity value="zib-allergyintolerance-v3.3-2020EN" /> <map value="NL-CM:8.2.7" /> <comment value="Criticality" /> </mapping> </element> <element id="AllergyIntolerance.criticality.id"> <path value="AllergyIntolerance.criticality.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="AllergyIntolerance.criticality.extension"> <path value="AllergyIntolerance.criticality.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="AllergyIntolerance.criticality.extension:criticalExtentCodelist"> <path value="AllergyIntolerance.criticality.extension" /> <sliceName value="criticalExtentCodelist" /> <short value="Optional Extensions Element" /> <definition value="Optional Extension Element - found in all resources." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="1" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> <profile value="http://nictiz.nl/fhir/StructureDefinition/ext-CodeSpecification" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="AllergyIntolerance.criticality.extension:criticalExtentCodelist.id"> <path value="AllergyIntolerance.criticality.extension.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="AllergyIntolerance.criticality.extension:criticalExtentCodelist.extension"> <path value="AllergyIntolerance.criticality.extension.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="AllergyIntolerance.criticality.extension:criticalExtentCodelist.url"> <path value="AllergyIntolerance.criticality.extension.url" /> <representation value="xmlAttr" /> <short value="identifies the meaning of the extension" /> <definition value="Source of the definition for the extension code - a logical name or a URL." /> <comment value="The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension." /> <min value="1" /> <max value="1" /> <base> <path value="Extension.url" /> <min value="1" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="uri" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <fixedUri value="http://nictiz.nl/fhir/StructureDefinition/ext-CodeSpecification" /> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="AllergyIntolerance.criticality.extension:criticalExtentCodelist.value[x]"> <path value="AllergyIntolerance.criticality.extension.value[x]" /> <short value="Criticality" /> <definition value="Critical extent is defined as “the potential severity of future reactions.” This represents a clinical evaluation of the worst case scenario for a future reaction. It can be based on the severity of past reactions, the dose and manner of exposure which caused reactions in the past, and the life-threatening potential of the type of reaction. Critical extent is a property of the allergy, and not of the reaction itself." /> <alias value="MateVanKritiekZijn" /> <min value="0" /> <max value="1" /> <base> <path value="Extension.value[x]" /> <min value="0" /> <max value="1" /> </base> <type> <code value="CodeableConcept" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <binding> <strength value="required" /> <valueSet value="http://decor.nictiz.nl/fhir/ValueSet/2.16.840.1.113883.2.4.3.11.60.40.2.8.2.4--20200901000000" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> <mapping> <identity value="zib-allergyintolerance-v3.3-2020EN" /> <map value="NL-CM:8.2.7" /> <comment value="Criticality" /> </mapping> </element> <element id="AllergyIntolerance.criticality.value"> <path value="AllergyIntolerance.criticality.value" /> <representation value="xmlAttr" /> <short value="Primitive value for code" /> <definition value="Primitive value for code" /> <min value="0" /> <max value="1" /> <base> <path value="string.value" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="code" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/regex"> <valueString value="[^\s]+(\s[^\s]+)*" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <maxLength value="1048576" /> </element> <element id="AllergyIntolerance.code"> <path value="AllergyIntolerance.code" /> <short value="CausativeAgent" /> <definition value="Substance, group of substances or environmental factor to which the patient is allergic or hypersensitive." /> <comment value="It is strongly recommended that this element be populated using a terminology, where possible. For example, some terminologies used include RxNorm, SNOMED CT, DM+D, NDFRT, ICD-9, IDC-10, UNII, and ATC. Plain text should only be used if there is no appropriate terminology available. Additional details can be specified in the text. When a substance or product code is specified for the 'code' element, the "default" semantic context is that this is a positive statement of an allergy or intolerance (depending on the value of the 'type' element, if present) condition to the specified substance/product. In the corresponding SNOMED CT allergy model, the specified substance/product is the target (destination) of the "Causative agent" relationship. The 'substanceExposureRisk' extension is available as a structured and more flexible alternative to the 'code' element for making positive or negative allergy or intolerance statements. This extension provides the capability to make "no known allergy" (or "no risk of adverse reaction") statements regarding any coded substance/product (including cases when a pre-coordinated "no allergy to x" concept for that substance/product does not exist). If the 'substanceExposureRisk' extension is present, the AllergyIntolerance.code element SHALL be omitted." /> <alias value="Code" /> <alias value="VeroorzakendeStof" /> <min value="0" /> <max value="1" /> <base> <path value="AllergyIntolerance.code" /> <min value="0" /> <max value="1" /> </base> <type> <code value="CodeableConcept" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="AllergyIntoleranceCode" /> </extension> <strength value="required" /> <description value="Type of the substance/product, allergy or intolerance condition, or negation/exclusion codes for reporting no known allergies." /> <valueSet value="http://decor.nictiz.nl/fhir/ValueSet/2.16.840.1.113883.2.4.3.11.60.121.11.2--20200901000000" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CE/CNE/CWE" /> </mapping> <mapping> <identity value="rim" /> <map value="CD" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:CodeableConcept rdfs:subClassOf dt:CD" /> </mapping> <mapping> <identity value="w5" /> <map value="FiveWs.what[x]" /> </mapping> <mapping> <identity value="v2" /> <map value="AL1-3 / IAM-3" /> </mapping> <mapping> <identity value="rim" /> <map value="substance/product: .participation[typeCode=CAGNT].role[classCode=ADMM].player[classCode=MAT, determinerCode=KIND, code <= ExposureAgentEntityType] negated/excluded substance/product: .participation[typeCode=CAGNT, negationInd=true].role[classCode=ADMM].player[classCode=MAT, determinerCode=KIND, code <= ExposureAgentEntityType] positive or negated/excluded condition/situation: Observation.code=ASSERTION; Observation.value" /> </mapping> <mapping> <identity value="zib-allergyintolerance-v3.3-2020EN" /> <map value="NL-CM:8.2.2" /> <comment value="CausativeAgent" /> </mapping> </element> <element id="AllergyIntolerance.patient"> <path value="AllergyIntolerance.patient" /> <short value="Who the sensitivity is for" /> <definition value="The patient who has the allergy or intolerance." /> <comment value="References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository." /> <alias value="Patient" /> <min value="1" /> <max value="1" /> <base> <path value="AllergyIntolerance.patient" /> <min value="1" /> <max value="1" /> </base> <type> <code value="Reference" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Patient" /> <targetProfile value="http://nictiz.nl/fhir/StructureDefinition/nl-core-Patient" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ref-1" /> <severity value="error" /> <human value="SHALL have a contained resource if a local reference is provided" /> <expression value="reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))" /> <xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Reference" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" /> </mapping> <mapping> <identity value="w5" /> <map value="FiveWs.subject[x]" /> </mapping> <mapping> <identity value="v2" /> <map value="(PID-3)" /> </mapping> <mapping> <identity value="rim" /> <map value=".participation[typeCode=SBJ].role[classCode=PAT]" /> </mapping> <mapping> <identity value="w5" /> <map value="FiveWs.subject" /> </mapping> </element> <element id="AllergyIntolerance.encounter"> <path value="AllergyIntolerance.encounter" /> <short value="Encounter when the allergy or intolerance was asserted" /> <definition value="The encounter when the allergy or intolerance was asserted." /> <comment value="References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository." /> <min value="0" /> <max value="1" /> <base> <path value="AllergyIntolerance.encounter" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Reference" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Encounter" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ref-1" /> <severity value="error" /> <human value="SHALL have a contained resource if a local reference is provided" /> <expression value="reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))" /> <xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Reference" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" /> </mapping> <mapping> <identity value="w5" /> <map value="FiveWs.context" /> </mapping> <mapping> <identity value="rim" /> <map value=".inboundRelationship[typeCode=COMP].source[classCode=ENC, moodCode=EVN]" /> </mapping> </element> <element id="AllergyIntolerance.onset[x]"> <path value="AllergyIntolerance.onset[x]" /> <slicing> <discriminator> <type value="type" /> <path value="$this" /> </discriminator> <rules value="open" /> </slicing> <short value="When allergy or intolerance was identified" /> <definition value="Estimated or actual date, date-time, or age when allergy or intolerance was identified." /> <min value="0" /> <max value="1" /> <base> <path value="AllergyIntolerance.onset[x]" /> <min value="0" /> <max value="1" /> </base> <type> <code value="dateTime" /> </type> <type> <code value="Age" /> </type> <type> <code value="Period" /> </type> <type> <code value="Range" /> </type> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="w5" /> <map value="FiveWs.init" /> </mapping> <mapping> <identity value="rim" /> <map value="effectiveTime.low" /> </mapping> </element> <element id="AllergyIntolerance.onset[x]:onsetDateTime"> <path value="AllergyIntolerance.onset[x]" /> <sliceName value="onsetDateTime" /> <short value="StartDateTime" /> <definition value="The date and time at which the allergy or undesired reaction was determined. This can be an exact date and time, or a rough indication of the date (such as only the year, or the month and the year)." /> <alias value="BeginDatumTijd" /> <min value="0" /> <max value="1" /> <base> <path value="AllergyIntolerance.onset[x]" /> <min value="0" /> <max value="1" /> </base> <type> <code value="dateTime" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="w5" /> <map value="FiveWs.init" /> </mapping> <mapping> <identity value="rim" /> <map value="effectiveTime.low" /> </mapping> <mapping> <identity value="zib-allergyintolerance-v3.3-2020EN" /> <map value="NL-CM:8.2.6" /> <comment value="StartDateTime" /> </mapping> </element> <element id="AllergyIntolerance.recordedDate"> <path value="AllergyIntolerance.recordedDate" /> <short value="Date first version of the resource instance was recorded" /> <definition value="The recordedDate represents when this particular AllergyIntolerance record was created in the system, which is often a system-generated date." /> <min value="0" /> <max value="1" /> <base> <path value="AllergyIntolerance.recordedDate" /> <min value="0" /> <max value="1" /> </base> <type> <code value="dateTime" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="w5" /> <map value="FiveWs.recorded" /> </mapping> <mapping> <identity value="v2" /> <map value="IAM-13" /> </mapping> <mapping> <identity value="rim" /> <map value=".participation[typeCode=AUT].time" /> </mapping> </element> <element id="AllergyIntolerance.recorder"> <path value="AllergyIntolerance.recorder" /> <short value="Who recorded the sensitivity" /> <definition value="Individual who recorded the record and takes responsibility for its content." /> <comment value="References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository." /> <alias value="Author" /> <min value="0" /> <max value="1" /> <base> <path value="AllergyIntolerance.recorder" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Reference" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Practitioner" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/PractitionerRole" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Patient" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/RelatedPerson" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ref-1" /> <severity value="error" /> <human value="SHALL have a contained resource if a local reference is provided" /> <expression value="reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))" /> <xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Reference" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" /> </mapping> <mapping> <identity value="w5" /> <map value="FiveWs.author" /> </mapping> <mapping> <identity value="rim" /> <map value=".participation[typeCode=AUT].role" /> </mapping> </element> <element id="AllergyIntolerance.asserter"> <path value="AllergyIntolerance.asserter" /> <short value="Source of the information about the allergy" /> <definition value="The source of the information about the allergy that is recorded." /> <comment value="The recorder takes responsibility for the content, but can reference the source from where they got it." /> <alias value="Source" /> <alias value="Informant" /> <min value="0" /> <max value="1" /> <base> <path value="AllergyIntolerance.asserter" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Reference" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Patient" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/RelatedPerson" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Practitioner" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/PractitionerRole" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ref-1" /> <severity value="error" /> <human value="SHALL have a contained resource if a local reference is provided" /> <expression value="reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))" /> <xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Reference" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" /> </mapping> <mapping> <identity value="w5" /> <map value="FiveWs.source" /> </mapping> <mapping> <identity value="v2" /> <map value="IAM-14 (if patient) / IAM-18 (if practitioner)" /> </mapping> <mapping> <identity value="rim" /> <map value=".participation[typeCode=INF].role" /> </mapping> </element> <element id="AllergyIntolerance.lastOccurrence"> <path value="AllergyIntolerance.lastOccurrence" /> <short value="LastReactionDateTime" /> <definition value="Entry of the last time a hypersensitive reaction took place." /> <comment value="This date may be replicated by one of the Onset of Reaction dates. Where a textual representation of the date of last occurrence is required e.g. 'In Childhood, '10 years ago' the Comment element should be used." /> <alias value="LaatsteReactieDatumTijd" /> <min value="0" /> <max value="1" /> <base> <path value="AllergyIntolerance.lastOccurrence" /> <min value="0" /> <max value="1" /> </base> <type> <code value="dateTime" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="outBoundRelationship[typeCode=SUBJ].target[classCode=OBS, moodCode=EVN, code <= CommonClinicalObservationType, value <= ObservationValue (Reaction Type)].effectiveTime" /> </mapping> <mapping> <identity value="zib-allergyintolerance-v3.3-2020EN" /> <map value="NL-CM:8.2.8" /> <comment value="LastReactionDateTime" /> </mapping> </element> <element id="AllergyIntolerance.note"> <path value="AllergyIntolerance.note" /> <short value="Additional text not captured in other fields" /> <definition value="Additional narrative about the propensity for the Adverse Reaction, not captured in other fields." /> <comment value="For example: including reason for flagging a seriousness of 'High Risk'; and instructions related to future exposure or administration of the substance, such as administration within an Intensive Care Unit or under corticosteroid cover. The notes should be related to an allergy or intolerance as a condition in general and not related to any particular episode of it. For episode notes and descriptions, use AllergyIntolerance.event.description and AllergyIntolerance.event.notes." /> <min value="0" /> <max value="1" /> <base> <path value="AllergyIntolerance.note" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Annotation" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="N/A" /> </mapping> <mapping> <identity value="rim" /> <map value="Act" /> </mapping> <mapping> <identity value="rim" /> <map value="subjectOf.observationEvent[code="annotation"].value" /> </mapping> </element> <element id="AllergyIntolerance.note.id"> <path value="AllergyIntolerance.note.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="AllergyIntolerance.note.extension"> <path value="AllergyIntolerance.note.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="AllergyIntolerance.note.author[x]"> <path value="AllergyIntolerance.note.author[x]" /> <short value="Individual responsible for the annotation" /> <definition value="The individual responsible for making the annotation." /> <comment value="Organization is used when there's no need for specific attribution as to who made the comment." /> <min value="0" /> <max value="1" /> <base> <path value="Annotation.author[x]" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Reference" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Practitioner" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Patient" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/RelatedPerson" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Organization" /> </type> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="N/A" /> </mapping> <mapping> <identity value="rim" /> <map value="Act.participant[typeCode=AUT].role" /> </mapping> </element> <element id="AllergyIntolerance.note.time"> <path value="AllergyIntolerance.note.time" /> <short value="When the annotation was made" /> <definition value="Indicates when this particular annotation was made." /> <min value="0" /> <max value="1" /> <base> <path value="Annotation.time" /> <min value="0" /> <max value="1" /> </base> <type> <code value="dateTime" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="N/A" /> </mapping> <mapping> <identity value="rim" /> <map value="Act.effectiveTime" /> </mapping> </element> <element id="AllergyIntolerance.note.text"> <path value="AllergyIntolerance.note.text" /> <short value="Comment" /> <definition value="Textual explanation of the hypersensitivity which cannot be entered in any of the other fields." /> <comment value="Systems are not required to have markdown support, so the text should be readable without markdown processing. The markdown syntax is GFM - see https://github.github.com/gfm/" /> <alias value="Toelichting" /> <min value="1" /> <max value="1" /> <base> <path value="Annotation.text" /> <min value="1" /> <max value="1" /> </base> <type> <code value="markdown" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="N/A" /> </mapping> <mapping> <identity value="rim" /> <map value="Act.text" /> </mapping> <mapping> <identity value="zib-allergyintolerance-v3.3-2020EN" /> <map value="NL-CM:8.2.9" /> <comment value="Comment" /> </mapping> </element> <element id="AllergyIntolerance.reaction"> <path value="AllergyIntolerance.reaction" /> <short value="Reaction" /> <definition value="Details about each adverse reaction event linked to exposure to the identified substance." /> <alias value="Reactie" /> <min value="0" /> <max value="*" /> <base> <path value="AllergyIntolerance.reaction" /> <min value="0" /> <max value="*" /> </base> <type> <code value="BackboneElement" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="outBoundRelationship[typeCode=SUBJ].target[classCode=OBS, moodCode=EVN, code <= CommonClinicalObservationType, value <= ObservationValue (Reaction Type)]" /> </mapping> <mapping> <identity value="zib-allergyintolerance-v3.3-2020EN" /> <map value="NL-CM:8.2.10" /> <comment value="Reaction" /> </mapping> </element> <element id="AllergyIntolerance.reaction.id"> <path value="AllergyIntolerance.reaction.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="AllergyIntolerance.reaction.extension"> <path value="AllergyIntolerance.reaction.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="AllergyIntolerance.reaction.modifierExtension"> <path value="AllergyIntolerance.reaction.modifierExtension" /> <short value="Extensions that cannot be ignored even if unrecognized" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself)." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <requirements value="Modifier extensions allow for extensions that *cannot* be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the [definition of modifier extensions](extensibility.html#modifierExtension)." /> <alias value="extensions" /> <alias value="user content" /> <alias value="modifiers" /> <min value="0" /> <max value="*" /> <base> <path value="BackboneElement.modifierExtension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <isModifier value="true" /> <isModifierReason value="Modifier extensions are expected to modify the meaning or interpretation of the element that contains them" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="AllergyIntolerance.reaction.substance"> <path value="AllergyIntolerance.reaction.substance" /> <short value="SpecificSubstance" /> <definition value="More specific indication of the substance that caused the reaction. This can be a specific substance from a group of substances to which the patient is allergic or hypersensitive." /> <comment value="Coding of the specific substance (or pharmaceutical product) with a terminology capable of triggering decision support should be used wherever possible. The 'code' element allows for the use of a specific substance or pharmaceutical product, or a group or class of substances. In the case of an allergy or intolerance to a class of substances, (for example, "penicillins"), the 'reaction.substance' element could be used to code the specific substance that was identified as having caused the reaction (for example, "amoxycillin"). Duplication of the value in the 'code' and 'reaction.substance' elements is acceptable when a specific substance has been recorded in 'code'." /> <alias value="SpecifiekeStof" /> <min value="0" /> <max value="1" /> <base> <path value="AllergyIntolerance.reaction.substance" /> <min value="0" /> <max value="1" /> </base> <type> <code value="CodeableConcept" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="SubstanceCode" /> </extension> <strength value="required" /> <description value="Codes defining the type of the substance (including pharmaceutical products)." /> <valueSet value="http://decor.nictiz.nl/fhir/ValueSet/2.16.840.1.113883.2.4.3.11.60.121.11.1--20200901000000" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CE/CNE/CWE" /> </mapping> <mapping> <identity value="rim" /> <map value="CD" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:CodeableConcept rdfs:subClassOf dt:CD" /> </mapping> <mapping> <identity value="rim" /> <map value="outBoundRelationship[typeCode=SAS].target[classCode=SBADM, code <= ExposureCode].participation[typeCode=CSM].role[classCode=ADMM].player[classCode=MAT, determinerCode=KIND, code <= ExposureAgentEntityType]" /> </mapping> <mapping> <identity value="zib-allergyintolerance-v3.3-2020EN" /> <map value="NL-CM:8.2.12" /> <comment value="SpecificSubstance" /> </mapping> </element> <element id="AllergyIntolerance.reaction.manifestation"> <path value="AllergyIntolerance.reaction.manifestation" /> <short value="Symptom" /> <definition value="The content specifications of the reaction that takes place when the patient is exposed to the causative substance." /> <comment value="Manifestation can be expressed as a single word, phrase or brief description. For example: nausea, rash or no reaction. It is preferable that manifestation should be coded with a terminology, where possible. The values entered here may be used to display on an application screen as part of a list of adverse reactions, as recommended in the UK NHS CUI guidelines. Terminologies commonly used include, but are not limited to, SNOMED CT or ICD10." /> <alias value="Symptoms" /> <alias value="Signs" /> <alias value="Symptoom" /> <min value="1" /> <max value="*" /> <base> <path value="AllergyIntolerance.reaction.manifestation" /> <min value="1" /> <max value="*" /> </base> <type> <code value="CodeableConcept" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="Manifestation" /> </extension> <strength value="extensible" /> <description value="Clinical symptoms and/or signs that are observed or associated with an Adverse Reaction Event." /> <valueSet value="http://decor.nictiz.nl/fhir/ValueSet/2.16.840.1.113883.2.4.3.11.60.40.2.8.2.5--20200901000000" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CE/CNE/CWE" /> </mapping> <mapping> <identity value="rim" /> <map value="CD" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:CodeableConcept rdfs:subClassOf dt:CD" /> </mapping> <mapping> <identity value="v2" /> <map value="AL1-5" /> </mapping> <mapping> <identity value="rim" /> <map value="code" /> </mapping> <mapping> <identity value="zib-allergyintolerance-v3.3-2020EN" /> <map value="NL-CM:8.2.11" /> <comment value="Symptom" /> </mapping> </element> <element id="AllergyIntolerance.reaction.description"> <path value="AllergyIntolerance.reaction.description" /> <short value="ReactionDescription" /> <definition value="Textual description of the reaction as a whole." /> <comment value="Use the description to provide any details of a particular event of the occurred reaction such as circumstances, reaction specifics, what happened before/after. Information, related to the event, but not describing a particular care should be captured in the comment field. For example: at the age of four, the patient was given penicillin for strep throat and subsequently developed severe hives." /> <alias value="Narrative" /> <alias value="Text" /> <alias value="ReactieBeschrijving" /> <min value="0" /> <max value="1" /> <base> <path value="AllergyIntolerance.reaction.description" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="text" /> </mapping> <mapping> <identity value="zib-allergyintolerance-v3.3-2020EN" /> <map value="NL-CM:8.2.13" /> <comment value="ReactionDescription" /> </mapping> </element> <element id="AllergyIntolerance.reaction.onset"> <path value="AllergyIntolerance.reaction.onset" /> <short value="ReactionTime" /> <definition value="Date and time at which the reaction took place. This may also be just the date or a partial date, in the event that the exact date is unknown." /> <alias value="ReactieTijdstip" /> <min value="0" /> <max value="1" /> <base> <path value="AllergyIntolerance.reaction.onset" /> <min value="0" /> <max value="1" /> </base> <type> <code value="dateTime" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="AL1-6" /> </mapping> <mapping> <identity value="rim" /> <map value="effectiveTime.low" /> </mapping> <mapping> <identity value="zib-allergyintolerance-v3.3-2020EN" /> <map value="NL-CM:8.2.17" /> <comment value="ReactionTime" /> </mapping> </element> <element id="AllergyIntolerance.reaction.severity"> <path value="AllergyIntolerance.reaction.severity" /> <short value="Severity" /> <definition value="The severity of the reaction as a result of exposure to the causative substance." /> <comment value="It is acknowledged that this assessment is very subjective. There may be some specific practice domains where objective scales have been applied. Objective scales can be included in this model as extensions." /> <alias value="Ernst" /> <min value="0" /> <max value="1" /> <base> <path value="AllergyIntolerance.reaction.severity" /> <min value="0" /> <max value="1" /> </base> <type> <code value="code" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="AllergyIntoleranceSeverity" /> </extension> <strength value="required" /> <description value="Use ConceptMap ErnstCodelijst_to_AllergyIntoleranceSeverity to translate terminology from the functional model to profile terminology in ValueSet AllergyIntoleranceSeverity." /> <valueSet value="http://hl7.org/fhir/ValueSet/reaction-event-severity|4.0.1"> <extension url="http://hl7.org/fhir/StructureDefinition/11179-permitted-value-conceptmap"> <valueCanonical value="http://nictiz.nl/fhir/ConceptMap/ErnstCodelijst-to-AllergyIntoleranceSeverity" /> </extension> </valueSet> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="inboundRelationship[typeCode=SUBJ].source[classCode=OBS, moodCode=EVN, code=SEV, value <= SeverityObservation (Severity Level)]" /> </mapping> <mapping> <identity value="zib-allergyintolerance-v3.3-2020EN" /> <map value="NL-CM:8.2.14" /> <comment value="Severity" /> </mapping> </element> <element id="AllergyIntolerance.reaction.exposureRoute"> <path value="AllergyIntolerance.reaction.exposureRoute" /> <short value="RouteOfExposure" /> <definition value="Way in which the patient came into contact with the causative agent or the way in which the agent was administered." /> <comment value="Coding of the route of exposure with a terminology should be used wherever possible." /> <alias value="WijzeVanBlootstelling" /> <min value="0" /> <max value="1" /> <base> <path value="AllergyIntolerance.reaction.exposureRoute" /> <min value="0" /> <max value="1" /> </base> <type> <code value="CodeableConcept" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="RouteOfAdministration" /> </extension> <strength value="required" /> <description value="A coded concept describing the route or physiological path of administration of a therapeutic agent into or onto the body of a subject." /> <valueSet value="http://decor.nictiz.nl/fhir/ValueSet/2.16.840.1.113883.2.4.3.11.60.40.2.8.2.12--20200901000000" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CE/CNE/CWE" /> </mapping> <mapping> <identity value="rim" /> <map value="CD" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:CodeableConcept rdfs:subClassOf dt:CD" /> </mapping> <mapping> <identity value="rim" /> <map value="outBoundRelationship[typeCode=SAS].target[classCode=SBADM, code <= ExposureCode].routeCode" /> </mapping> <mapping> <identity value="zib-allergyintolerance-v3.3-2020EN" /> <map value="NL-CM:8.2.15" /> <comment value="RouteOfExposure" /> </mapping> </element> <element id="AllergyIntolerance.reaction.note"> <path value="AllergyIntolerance.reaction.note" /> <short value="Text about event not captured in other fields" /> <definition value="Additional text about the adverse reaction event not captured in other fields." /> <comment value="Use this field to record information indirectly related to a particular event and not captured in the description. For example: Clinical records are no longer available, recorded based on information provided to the patient by her mother and her mother is deceased." /> <min value="0" /> <max value="*" /> <base> <path value="AllergyIntolerance.reaction.note" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Annotation" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="N/A" /> </mapping> <mapping> <identity value="rim" /> <map value="Act" /> </mapping> <mapping> <identity value="rim" /> <map value="subjectOf.observationEvent[code="annotation"].value" /> </mapping> </element> </snapshot> <differential> <element id="AllergyIntolerance"> <path value="AllergyIntolerance" /> <alias value="nl-core-AllergyIntolerance" /> </element> <element id="AllergyIntolerance.patient"> <path value="AllergyIntolerance.patient" /> <type> <code value="Reference" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Patient" /> <targetProfile value="http://nictiz.nl/fhir/StructureDefinition/nl-core-Patient" /> </type> </element> </differential> </StructureDefinition>