Test IG Training

There are no (further) constraints on this element

Element id

Patient.id

Short description

Logical id of this artifact

Definition

The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

Comments

The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

Data type

There are no (further) constraints on this element

Element id

Patient.meta

Short description

Metadata about the resource

Definition

The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

Data type

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())

Mappings

rim: n/a
rim: N/A

implicitRules

Σ ?!

0..1

There are no (further) constraints on this element

Element id

Patient.implicitRules

Short description

A set of rules under which this content was created

Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

Data type

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())

Mappings

rim: n/a

language

0..1

codeBinding

There are no (further) constraints on this element

Element id

Patient.language

Short description

Language of the resource content

Definition

The base language in which the resource is written.

Comments

Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

Data type

Binding

A human language.

CommonLanguages (preferred)

Binding extensions

maxValueSet	AllLanguages

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())

Mappings

rim: n/a

text

0..1

There are no (further) constraints on this element

Element id

Patient.text

Short description

Text summary of the resource, for human interpretation

Alternate names

narrative, html, xhtml, display

Definition

A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

Comments

Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

Data type

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())

Mappings

rim: n/a
rim: N/A
rim: Act.text?

contained

0..*

There are no (further) constraints on this element

Element id

Patient.contained

Short description

Contained, inline Resources

Alternate names

inline resources, anonymous resources, contained resources

Definition

These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

Comments

This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

Data type

Mappings

rim: Entity. Role, or Act
rim: N/A

extension

0..*

There are no (further) constraints on this element

Element id

Patient.extension

Short description

Additional content defined by implementations

Alternate names

extensions, user content

Definition

May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Data type

http://hl7.org/fhir/StructureDefinition/patient-birthPlace

Slicing

Unordered, Open, by url(Value)

Extensions are always sliced by (at least) url

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
ext-1: Must have either extensions or value[x], not both
extension.exists() != value.exists()

Mappings

rim: n/a
rim: N/A

birthPlace

0..1

Extension(Address)

Element id

Patient.extension:birthPlace

Short description

Place of Birth for patient

Alternate names

extensions, user content

Definition

The registered place of birth of the patient. A sytem may use the address.text if they don't store the birthPlace address in discrete elements.

Comments

Data type

Extension(Address)

Extension URL

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
ext-1: Must have either extensions or value[x], not both
extension.exists() != value.exists()

Mappings

rim: n/a
rim: N/A

occupationFirelyExtension

0..*

Element id

Patient.extension:occupationFirelyExtension

Short description

Optional Extensions Element

Alternate names

extensions, user content

Definition

Optional Extension Element - found in all resources.

Comments

Data type

https://example.org/fhir/StructureDefinition/OccupationFirelyExtension

Extension URL

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
ext-1: Must have either extensions or value[x], not both
extension.exists() != value.exists()

Mappings

rim: n/a
rim: N/A

0..1

There are no (further) constraints on this element

Element id

Patient.extension:occupationFirelyExtension.id

Short description

Unique id for inter-element referencing

Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Data type

Mappings

rim: n/a

extension

0..0

There are no (further) constraints on this element

Element id

Patient.extension:occupationFirelyExtension.extension

Short description

Additional content defined by implementations

Alternate names

extensions, user content

Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Comments

Data type

Slicing

Unordered, Open, by url(Value)

Extensions are always sliced by (at least) url

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
ext-1: Must have either extensions or value[x], not both
extension.exists() != value.exists()

Mappings

rim: n/a
rim: N/A

url

1..1

uriFixed Value

There are no (further) constraints on this element

Element id

Patient.extension:occupationFirelyExtension.url

Short description

identifies the meaning of the extension

Definition

Source of the definition for the extension code - a logical name or a URL.

Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Data type

Fixed value

https://example.org/fhir/StructureDefinition/OccupationFirelyExtension

Mappings

rim: N/A

value[x]

0..1

Binding

Element id

Patient.extension:occupationFirelyExtension.value[x]

Short description

Value of extension

Definition

Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

Binding

occupations (extensible)

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())

Mappings

rim: n/a
rim: N/A

valueCodeableConcept

There are no (further) constraints on this element

Data type

modifierExtension

?! C

0..*

There are no (further) constraints on this element

Element id

Patient.modifierExtension

Short description

Extensions that cannot be ignored

Alternate names

extensions, user content

Definition

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Comments

Data type

Slicing

Unordered, Open, by url(Value)

Extensions are always sliced by (at least) url

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
ext-1: Must have either extensions or value[x], not both
extension.exists() != value.exists()

Mappings

rim: n/a
rim: N/A

identifier

S Σ

1..*

Element id

Patient.identifier

Short description

An identifier for this patient

Definition

An identifier for this patient.

Requirements

Patients are almost always assigned specific numerical identifiers.

Data type

Slicing

Unordered, Open, by system(Value)

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())

Mappings

rim: n/a
v2: CX / EI (occasionally, more often EI maps to a resource id or a URL)
rim: II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT]
servd: Identifier
w5: FiveWs.identifier
v2: PID-3
rim: id
cda: .id

NationalRegistry

1..1

There are no (further) constraints on this element

Element id

Patient.identifier:NationalRegistry

Short description

An identifier for this patient

Definition

An identifier for this patient.

Requirements

Patients are almost always assigned specific numerical identifiers.

Data type

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())

Mappings

rim: n/a
v2: CX / EI (occasionally, more often EI maps to a resource id or a URL)
rim: II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT]
servd: Identifier
w5: FiveWs.identifier
v2: PID-3
rim: id
cda: .id

0..1

There are no (further) constraints on this element

Element id

Patient.identifier:NationalRegistry.id

Short description

Unique id for inter-element referencing

Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Data type

Mappings

rim: n/a

extension

0..*

There are no (further) constraints on this element

Element id

Patient.identifier:NationalRegistry.extension

Short description

Additional content defined by implementations

Alternate names

extensions, user content

Definition

Comments

Data type

Slicing

Unordered, Open, by url(Value)

Extensions are always sliced by (at least) url

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
ext-1: Must have either extensions or value[x], not both
extension.exists() != value.exists()

Mappings

rim: n/a
rim: N/A

use

Σ ?!

0..1

codeBinding

There are no (further) constraints on this element

Element id

Patient.identifier:NationalRegistry.use

Short description

usual | official | temp | secondary | old (If known)

Definition

The purpose of this identifier.

Requirements

Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

Comments

Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

Data type

Binding

Identifies the purpose for this identifier, if known .

IdentifierUse (required)

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())

Mappings

rim: n/a
v2: N/A
rim: Role.code or implied by context

type

0..1

CodeableConceptBinding

There are no (further) constraints on this element

Element id

Patient.identifier:NationalRegistry.type

Short description

Description of identifier

Definition

A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

Requirements

Allows users to make use of identifiers when the identifier system is not known.

Comments

This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

Data type

Identifier Type Codes (extensible)

Binding

A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())

Mappings

rim: n/a
v2: CE/CNE/CWE
rim: CD
orim: fhir:CodeableConcept rdfs:subClassOf dt:CD
v2: CX.5
rim: Role.code or implied by context

system

1..1

uriFixed Value

Element id

Patient.identifier:NationalRegistry.system

Short description

The namespace for the identifier value

Definition

Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

Requirements

There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

Comments

Identifier.system is always case sensitive.

Data type

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())

Fixed value

http://national.registry.org/ids

Examples
General

http://www.acme.com/identifiers/patient

Mappings

rim: n/a
v2: CX.4 / EI-2-4
rim: II.root or Role.id.root
servd: ./IdentifierType

value

1..1

There are no (further) constraints on this element

Element id

Patient.identifier:NationalRegistry.value

Short description

The value that is unique

Definition

The portion of the identifier typically relevant to the user and which is unique within the context of the system.

Comments

If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

Data type

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())

Examples
General

Mappings

rim: n/a
v2: CX.1 / EI.1
rim: II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root)
servd: ./Value

period

Σ C

0..1

There are no (further) constraints on this element

Element id

Patient.identifier:NationalRegistry.period

Short description

Time period when id is/was valid for use

Definition

Time period during which identifier is/was valid for use.

Comments

A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times").

Period is not used for a duration (a measure of elapsed time). See Duration.

Data type

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
per-1: If present, start SHALL have a lower value than end
start.hasValue().not() or end.hasValue().not() or (start <= end)

Mappings

rim: n/a
v2: DR
rim: IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"]
v2: CX.7 + CX.8
rim: Role.effectiveTime or implied by context
servd: ./StartDate and ./EndDate

assigner

Σ C

0..1

There are no (further) constraints on this element

Element id

Patient.identifier:NationalRegistry.assigner

Short description

Organization that issued id (may be just text)

Definition

Organization that issued/manages the identifier.

Comments

The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.

Data type

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
ref-1: SHALL have a contained resource if a local reference is provided
reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))

Mappings

rim: n/a
rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity)
v2: CX.4 / (CX.4,CX.9,CX.10)
rim: II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper
servd: ./IdentifierIssuingAuthority

HospitalId

0..*

There are no (further) constraints on this element

Element id

Patient.identifier:HospitalId

Short description

An identifier for this patient

Definition

An identifier for this patient.

Requirements

Patients are almost always assigned specific numerical identifiers.

Data type

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())

Mappings

rim: n/a
v2: CX / EI (occasionally, more often EI maps to a resource id or a URL)
rim: II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT]
servd: Identifier
w5: FiveWs.identifier
v2: PID-3
rim: id
cda: .id

0..1

There are no (further) constraints on this element

Element id

Patient.identifier:HospitalId.id

Short description

Unique id for inter-element referencing

Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Data type

Mappings

rim: n/a

extension

0..*

There are no (further) constraints on this element

Element id

Patient.identifier:HospitalId.extension

Short description

Additional content defined by implementations

Alternate names

extensions, user content

Definition

Comments

Data type

Slicing

Unordered, Open, by url(Value)

Extensions are always sliced by (at least) url

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
ext-1: Must have either extensions or value[x], not both
extension.exists() != value.exists()

Mappings

rim: n/a
rim: N/A

use

Σ ?!

0..1

codeBinding

There are no (further) constraints on this element

Element id

Patient.identifier:HospitalId.use

Short description

usual | official | temp | secondary | old (If known)

Definition

The purpose of this identifier.

Requirements

Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

Comments

Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

Data type

Binding

Identifies the purpose for this identifier, if known .

IdentifierUse (required)

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())

Mappings

rim: n/a
v2: N/A
rim: Role.code or implied by context

type

0..1

CodeableConceptBinding

There are no (further) constraints on this element

Element id

Patient.identifier:HospitalId.type

Short description

Description of identifier

Definition

A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

Requirements

Allows users to make use of identifiers when the identifier system is not known.

Comments

Data type

Identifier Type Codes (extensible)

Binding

A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())

Mappings

rim: n/a
v2: CE/CNE/CWE
rim: CD
orim: fhir:CodeableConcept rdfs:subClassOf dt:CD
v2: CX.5
rim: Role.code or implied by context

system

0..1

uriFixed Value

Element id

Patient.identifier:HospitalId.system

Short description

The namespace for the identifier value

Definition

Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

Requirements

There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

Comments

Identifier.system is always case sensitive.

Data type

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())

Fixed value

http://example.org/testvalue

Examples
General

http://www.acme.com/identifiers/patient

Mappings

rim: n/a
v2: CX.4 / EI-2-4
rim: II.root or Role.id.root
servd: ./IdentifierType

value

0..1

There are no (further) constraints on this element

Element id

Patient.identifier:HospitalId.value

Short description

The value that is unique

Definition

The portion of the identifier typically relevant to the user and which is unique within the context of the system.

Comments

Data type

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())

Examples
General

Mappings

rim: n/a
v2: CX.1 / EI.1
rim: II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root)
servd: ./Value

period

Σ C

0..1

There are no (further) constraints on this element

Element id

Patient.identifier:HospitalId.period

Short description

Time period when id is/was valid for use

Definition

Time period during which identifier is/was valid for use.

Comments

Period is not used for a duration (a measure of elapsed time). See Duration.

Data type

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
per-1: If present, start SHALL have a lower value than end
start.hasValue().not() or end.hasValue().not() or (start <= end)

Mappings

rim: n/a
v2: DR
rim: IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"]
v2: CX.7 + CX.8
rim: Role.effectiveTime or implied by context
servd: ./StartDate and ./EndDate

assigner

Σ C

0..1

There are no (further) constraints on this element

Element id

Patient.identifier:HospitalId.assigner

Short description

Organization that issued id (may be just text)

Definition

Organization that issued/manages the identifier.

Comments

The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.

Data type

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
ref-1: SHALL have a contained resource if a local reference is provided
reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))

Mappings

rim: n/a
rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity)
v2: CX.4 / (CX.4,CX.9,CX.10)
rim: II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper
servd: ./IdentifierIssuingAuthority

active

Σ ?!

0..1

There are no (further) constraints on this element

Element id

Patient.active

Short description

Whether this patient's record is in active use

Definition

Whether this patient record is in active use. Many systems use this property to mark as non-current patients, such as those that have not been seen for a period of time based on an organization's business rules.

It is often used to filter patient lists to exclude inactive patients

Deceased patients may also be marked as inactive for the same reasons, but may be active for some time after death.

Requirements

Need to be able to mark a patient record as not to be used because it was created in error.

Comments

If a record is inactive, and linked to an active record, then future patient/record updates should occur on the other patient.

Meaning when missing

This resource is generally assumed to be active if no value is provided for the active element

Data type

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())

Mappings

rim: n/a
w5: FiveWs.status
rim: statusCode
cda: n/a

name

S Σ

1..*

TrainingHumanName

Element id

Patient.name

Short description

Name of a human - parts and usage

Definition

A human's name with the ability to identify parts and usage.

Requirements

Need to be able to track the patient by multiple names. Examples are your official name and a partner name.

Comments

Names may be changed, or repudiated, or people may have different names in different contexts. Names may be divided into parts of different type that have variable significance depending on context, though the division into parts does not always matter. With personal names, the different parts might or might not be imbued with some implicit meaning; various cultures associate different importance with the name parts and the degree to which systems must care about name parts around the world varies widely.

Data type

TrainingHumanName

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())

Mappings

rim: n/a
v2: XPN
rim: EN (actually, PN)
servd: ProviderName
v2: PID-5, PID-9
rim: name
cda: .patient.name

0..1

There are no (further) constraints on this element

Element id

Patient.name.id

Short description

Unique id for inter-element referencing

Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Data type

Mappings

rim: n/a

extension

0..*

There are no (further) constraints on this element

Element id

Patient.name.extension

Short description

Additional content defined by implementations

Alternate names

extensions, user content

Definition

Comments

Data type

Slicing

Unordered, Open, by url(Value)

Extensions are always sliced by (at least) url

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
ext-1: Must have either extensions or value[x], not both
extension.exists() != value.exists()

Mappings

rim: n/a
rim: N/A

use

Σ ?!

0..1

codeBinding

There are no (further) constraints on this element

Element id

Patient.name.use

Short description

Definition

Identifies the purpose for this name.

Requirements

Allows the appropriate name for a particular context of use to be selected from among a set of names.

Comments

Applications can assume that a name is current unless it explicitly says that it is temporary or old.

Data type

Binding

The use of a human name.

NameUse (required)

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())

Mappings

rim: n/a
v2: XPN.7, but often indicated by which field contains the name
rim: unique(./use)
servd: ./NamePurpose

text

0..1

There are no (further) constraints on this element

Element id

Patient.name.text

Short description

Text representation of the full name

Definition

Specifies the entire name as it should be displayed e.g. on an application UI. This may be provided instead of or as well as the specific parts.

Requirements

A renderable, unencoded form.

Comments

Can provide both a text representation and parts. Applications updating a name SHALL ensure that when both text and parts are present, no content is included in the text that isn't found in a part.

Data type

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())

Mappings

rim: n/a
v2: implied by XPN.11
rim: ./formatted

family

S Σ

1..1

There are no (further) constraints on this element

Element id

Patient.name.family

Short description

Family name (often called 'Surname')

Alternate names

surname

Definition

The part of a name that links to the genealogy. In some cultures (e.g. Eritrea) the family name of a son is the first name of his father.

Comments

Family Name may be decomposed into specific parts using extensions (de, nl, es related cultures).

Data type

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())

Mappings

rim: n/a
v2: XPN.1/FN.1
rim: ./part[partType = FAM]
servd: ./FamilyName

given

S Σ

1..3

There are no (further) constraints on this element

Element id

Patient.name.given

Short description

Given names (not always 'first'). Includes middle names

Alternate names

first name, middle name

Definition

Given name.

Comments

If only initials are recorded, they may be used in place of the full name parts. Initials may be separated into multiple given names but often aren't due to paractical limitations. This element is not called "first name" since given names do not always come first.

Data type

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())

Mappings

rim: n/a
v2: XPN.2 + XPN.3
rim: ./part[partType = GIV]
servd: ./GivenNames

prefix

0..*

There are no (further) constraints on this element

Element id

Patient.name.prefix

Short description

Parts that come before the name

Definition

Part of the name that is acquired as a title due to academic, legal, employment or nobility status, etc. and that appears at the start of the name.

Comments

Note that FHIR strings SHALL NOT exceed 1MB in size

Data type

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())

Mappings

rim: n/a
v2: XPN.5
rim: ./part[partType = PFX]
servd: ./TitleCode

suffix

0..*

There are no (further) constraints on this element

Element id

Patient.name.suffix

Short description

Parts that come after the name

Definition

Part of the name that is acquired as a title due to academic, legal, employment or nobility status, etc. and that appears at the end of the name.

Comments

Note that FHIR strings SHALL NOT exceed 1MB in size

Data type

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())

Mappings

rim: n/a
v2: XPN/4
rim: ./part[partType = SFX]

period

Σ C

0..1

There are no (further) constraints on this element

Element id

Patient.name.period

Short description

Time period when name was/is in use

Definition

Indicates the period of time when this name was valid for the named person.

Requirements

Allows names to be placed in historical context.

Comments

Period is not used for a duration (a measure of elapsed time). See Duration.

Data type

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
per-1: If present, start SHALL have a lower value than end
start.hasValue().not() or end.hasValue().not() or (start <= end)

Mappings

rim: n/a
v2: DR
rim: IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"]
v2: XPN.13 + XPN.14
rim: ./usablePeriod[type="IVL<TS>"]
servd: ./StartDate and ./EndDate

telecom

Σ C

1..*

Element id

Patient.telecom

Short description

A contact detail for the individual

Definition

A contact detail (e.g. a telephone number or an email address) by which the individual may be contacted.

Requirements

People have (primary) ways to contact them in some way such as phone, email.

Comments

A Patient may have multiple ways to be contacted with different uses or applicable periods. May need to have options for contacting the person urgently and also to help with identification. The address might not go directly to the individual, but may reach another party that is able to proxy for the patient (i.e. home phone, or pet owner's phone).

Data type

Slicing

Unordered, Open, by use(Value)

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
cpt-2: A system is required if a value is provided.
value.empty() or system.exists()

Mappings

rim: n/a
v2: XTN
rim: TEL
servd: ContactPoint
v2: PID-13, PID-14, PID-40
rim: telecom
cda: .telecom

privateDetails

Σ C

1..1

There are no (further) constraints on this element

Element id

Patient.telecom:privateDetails

Short description

A contact detail for the individual

Definition

A contact detail (e.g. a telephone number or an email address) by which the individual may be contacted.

Requirements

People have (primary) ways to contact them in some way such as phone, email.

Comments

Data type

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
cpt-2: A system is required if a value is provided.
value.empty() or system.exists()

Mappings

rim: n/a
v2: XTN
rim: TEL
servd: ContactPoint
v2: PID-13, PID-14, PID-40
rim: telecom
cda: .telecom

0..1

There are no (further) constraints on this element

Element id

Patient.telecom:privateDetails.id

Short description

Unique id for inter-element referencing

Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Data type

Mappings

rim: n/a

extension

0..*

There are no (further) constraints on this element

Element id

Patient.telecom:privateDetails.extension

Short description

Additional content defined by implementations

Alternate names

extensions, user content

Definition

Comments

Data type

Slicing

Unordered, Open, by url(Value)

Extensions are always sliced by (at least) url

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
ext-1: Must have either extensions or value[x], not both
extension.exists() != value.exists()

Mappings

rim: n/a
rim: N/A

system

Σ C

1..1

codeBinding

There are no (further) constraints on this element

Element id

Patient.telecom:privateDetails.system

Short description

phone | fax | email | pager | url | sms | other

Definition

Telecommunications form for contact point - what communications system is required to make use of the contact.

Comments

Note that FHIR strings SHALL NOT exceed 1MB in size

Data type

Binding

Telecommunications form for contact point.

ContactPointSystem (required)

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1, cpt-2

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())

Mappings

rim: n/a
v2: XTN.3
rim: ./scheme
servd: ./ContactPointType

value

1..1

There are no (further) constraints on this element

Element id

Patient.telecom:privateDetails.value

Short description

The actual contact point details

Definition

The actual contact point details, in a form that is meaningful to the designated communication system (i.e. phone number or email address).

Requirements

Need to support legacy numbers that are not in a tightly controlled format.

Comments

Additional text data such as phone extension numbers, or notes about use of the contact are sometimes included in the value.

Data type

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())

Mappings

rim: n/a
v2: XTN.1 (or XTN.12)
rim: ./url
servd: ./Value

use

Σ ?!

1..1

codeBindingFixed Value

Element id

Patient.telecom:privateDetails.use

Short description

home | work | temp | old | mobile - purpose of this contact point

Definition

Identifies the purpose for the contact point.

Requirements

Need to track the way a person uses this contact, so a user can choose which is appropriate for their purpose.

Comments

Applications can assume that a contact is current unless it explicitly says that it is temporary or old.

Data type

Binding

Use of contact point.

ContactPointUse (required)

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())

Fixed value

home

Mappings

rim: n/a
v2: XTN.2 - but often indicated by field
rim: unique(./use)
servd: ./ContactPointPurpose

rank

0..1

There are no (further) constraints on this element

Element id

Patient.telecom:privateDetails.rank

Short description

Specify preferred order of use (1 = highest)

Definition

Specifies a preferred order in which to use a set of contacts. ContactPoints with lower rank values are more preferred than those with higher rank values.

Comments

Note that rank does not necessarily follow the order in which the contacts are represented in the instance.

Data type

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())

Mappings

rim: n/a
v2: n/a

period

Σ C

0..1

There are no (further) constraints on this element

Element id

Patient.telecom:privateDetails.period

Short description

Time period when the contact point was/is in use

Definition

Time period when the contact point was/is in use.

Comments

Period is not used for a duration (a measure of elapsed time). See Duration.

Data type

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
per-1: If present, start SHALL have a lower value than end
start.hasValue().not() or end.hasValue().not() or (start <= end)

Mappings

rim: n/a
v2: DR
rim: IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"]
v2: N/A
rim: ./usablePeriod[type="IVL<TS>"]
servd: ./StartDate and ./EndDate

workDetails

Σ C

0..1

There are no (further) constraints on this element

Element id

Patient.telecom:workDetails

Short description

A contact detail for the individual

Definition

A contact detail (e.g. a telephone number or an email address) by which the individual may be contacted.

Requirements

People have (primary) ways to contact them in some way such as phone, email.

Comments

Data type

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
cpt-2: A system is required if a value is provided.
value.empty() or system.exists()

Mappings

rim: n/a
v2: XTN
rim: TEL
servd: ContactPoint
v2: PID-13, PID-14, PID-40
rim: telecom
cda: .telecom

0..1

There are no (further) constraints on this element

Element id

Patient.telecom:workDetails.id

Short description

Unique id for inter-element referencing

Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Data type

Mappings

rim: n/a

extension

0..*

There are no (further) constraints on this element

Element id

Patient.telecom:workDetails.extension

Short description

Additional content defined by implementations

Alternate names

extensions, user content

Definition

Comments

Data type

Slicing

Unordered, Open, by url(Value)

Extensions are always sliced by (at least) url

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
ext-1: Must have either extensions or value[x], not both
extension.exists() != value.exists()

Mappings

rim: n/a
rim: N/A

system

Σ C

0..1

codeBinding

There are no (further) constraints on this element

Element id

Patient.telecom:workDetails.system

Short description

phone | fax | email | pager | url | sms | other

Definition

Telecommunications form for contact point - what communications system is required to make use of the contact.

Comments

Note that FHIR strings SHALL NOT exceed 1MB in size

Data type

Binding

Telecommunications form for contact point.

ContactPointSystem (required)

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1, cpt-2

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())

Mappings

rim: n/a
v2: XTN.3
rim: ./scheme
servd: ./ContactPointType

value

1..1

There are no (further) constraints on this element

Element id

Patient.telecom:workDetails.value

Short description

The actual contact point details

Definition

The actual contact point details, in a form that is meaningful to the designated communication system (i.e. phone number or email address).

Requirements

Need to support legacy numbers that are not in a tightly controlled format.

Comments

Additional text data such as phone extension numbers, or notes about use of the contact are sometimes included in the value.

Data type

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())

Mappings

rim: n/a
v2: XTN.1 (or XTN.12)
rim: ./url
servd: ./Value

use

Σ ?!

1..1

codeBindingFixed Value

Element id

Patient.telecom:workDetails.use

Short description

home | work | temp | old | mobile - purpose of this contact point

Definition

Identifies the purpose for the contact point.

Requirements

Need to track the way a person uses this contact, so a user can choose which is appropriate for their purpose.

Comments

Applications can assume that a contact is current unless it explicitly says that it is temporary or old.

Data type

Binding

Use of contact point.

ContactPointUse (required)

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())

Fixed value

work

Mappings

rim: n/a
v2: XTN.2 - but often indicated by field
rim: unique(./use)
servd: ./ContactPointPurpose

rank

0..1

There are no (further) constraints on this element

Element id

Patient.telecom:workDetails.rank

Short description

Specify preferred order of use (1 = highest)

Definition

Specifies a preferred order in which to use a set of contacts. ContactPoints with lower rank values are more preferred than those with higher rank values.

Comments

Note that rank does not necessarily follow the order in which the contacts are represented in the instance.

Data type

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())

Mappings

rim: n/a
v2: n/a

period

Σ C

0..1

There are no (further) constraints on this element

Element id

Patient.telecom:workDetails.period

Short description

Time period when the contact point was/is in use

Definition

Time period when the contact point was/is in use.

Comments

Period is not used for a duration (a measure of elapsed time). See Duration.

Data type

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
per-1: If present, start SHALL have a lower value than end
start.hasValue().not() or end.hasValue().not() or (start <= end)

Mappings

rim: n/a
v2: DR
rim: IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"]
v2: N/A
rim: ./usablePeriod[type="IVL<TS>"]
servd: ./StartDate and ./EndDate

gender

S Σ

0..1

codeBinding

There are no (further) constraints on this element

Element id

Patient.gender

Short description

male | female | other | unknown

Definition

Administrative Gender - the gender that the patient is considered to have for administration and record keeping purposes.

Requirements

Needed for identification of the individual, in combination with (at least) name and birth date.

Comments

The gender might not match the biological sex as determined by genetics or the individual's preferred identification. Note that for both humans and particularly animals, there are other legitimate possibilities than male and female, though the vast majority of systems and contexts only support male and female. Systems providing decision support or enforcing business rules should ideally do this on the basis of Observations dealing with the specific sex or gender aspect of interest (anatomical, chromosomal, social, etc.) However, because these observations are infrequently recorded, defaulting to the administrative gender is common practice. Where such defaulting occurs, rule enforcement should allow for the variation between administrative and biological, chromosomal and other gender aspects. For example, an alert about a hysterectomy on a male should be handled as a warning or overridable error, not a "hard" error. See the Patient Gender and Sex section for additional information about communicating patient gender and sex.

Data type

AdministrativeGender (required)

Binding

The gender of a person used for administrative purposes.

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())

Mappings

rim: n/a
v2: PID-8
rim: player[classCode=PSN|ANM and determinerCode=INSTANCE]/administrativeGender
cda: .patient.administrativeGenderCode

birthDate

S Σ

1..1

date

There are no (further) constraints on this element

Element id

Patient.birthDate

Short description

The date of birth for the individual

Definition

The date of birth for the individual.

Requirements

Age of the individual drives many clinical processes.

Comments

At least an estimated year should be provided as a guess if the real DOB is unknown There is a standard extension "patient-birthTime" available that should be used where Time is required (such as in maternity/infant care systems).

Data type

date

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())

Mappings

rim: n/a
v2: PID-7
rim: player[classCode=PSN|ANM and determinerCode=INSTANCE]/birthTime
cda: .patient.birthTime
loinc: 21112-8

deceased[x]

Σ ?!

0..1

There are no (further) constraints on this element

Element id

Patient.deceased[x]

Short description

Indicates if the individual is deceased or not

Definition

Indicates if the individual is deceased or not.

Requirements

The fact that a patient is deceased influences the clinical process. Also, in human communication and relation management it is necessary to know whether the person is alive.

Comments

If there's no value in the instance, it means there is no statement on whether or not the individual is deceased. Most systems will interpret the absence of a value as a sign of the person being alive.

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())

Mappings

rim: n/a
v2: PID-30 (bool) and PID-29 (datetime)
rim: player[classCode=PSN|ANM and determinerCode=INSTANCE]/deceasedInd, player[classCode=PSN|ANM and determinerCode=INSTANCE]/deceasedTime
cda: n/a

deceasedBoolean

There are no (further) constraints on this element

Data type

deceasedDateTime

There are no (further) constraints on this element

Data type

address

Σ C

0..*

Element id

Patient.address

Short description

An address for the individual

Definition

An address for the individual.

Requirements

May need to keep track of patient addresses for contacting, billing or reporting requirements and also to help with identification.

Comments

Patient may have multiple addresses with different uses or applicable periods.

Data type

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
training-3: Fill in the Period!!
(use = 'temp') implies period.exists()

Mappings

rim: n/a
v2: XAD
rim: AD
servd: Address
v2: PID-11
rim: addr
cda: .addr

0..1

There are no (further) constraints on this element

Element id

Patient.address.id

Short description

Unique id for inter-element referencing

Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Data type

Mappings

rim: n/a

extension

0..*

There are no (further) constraints on this element

Element id

Patient.address.extension

Short description

Additional content defined by implementations

Alternate names

extensions, user content

Definition

Comments

Data type

Slicing

Unordered, Open, by url(Value)

Extensions are always sliced by (at least) url

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
ext-1: Must have either extensions or value[x], not both
extension.exists() != value.exists()

Mappings

rim: n/a
rim: N/A

use

Σ ?! C

0..1

codeBinding

Element id

Patient.address.use

Short description

home | work | temp | old | billing - purpose of this address

Definition

The purpose of this address.

Requirements

Allows an appropriate address to be chosen from a list of many.

Comments

Applications can assume that an address is current unless it explicitly says that it is temporary or old.

Data type

Binding

The use of an address.

AddressUse (required)

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1, training-3

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())

Examples
General

home

Mappings

rim: n/a
v2: XAD.7
rim: unique(./use)
servd: ./AddressPurpose

type

0..1

codeBinding

There are no (further) constraints on this element

Element id

Patient.address.type

Short description

postal | physical | both

Definition

Distinguishes between physical addresses (those you can visit) and mailing addresses (e.g. PO Boxes and care-of addresses). Most addresses are both.

Comments

The definition of Address states that "address is intended to describe postal addresses, not physical locations". However, many applications track whether an address has a dual purpose of being a location that can be visited as well as being a valid delivery destination, and Postal addresses are often used as proxies for physical locations (also see the Location resource).

Data type

Binding

The type of an address (physical / postal).

AddressType (required)

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())

Examples
General

both

Mappings

rim: n/a
v2: XAD.18
rim: unique(./use)
vcard: address type parameter

text

0..1

There are no (further) constraints on this element

Element id

Patient.address.text

Short description

Text representation of the address

Definition

Specifies the entire address as it should be displayed e.g. on a postal label. This may be provided instead of or as well as the specific parts.

Requirements

A renderable, unencoded form.

Comments

Can provide both a text representation and parts. Applications updating an address SHALL ensure that when both text and parts are present, no content is included in the text that isn't found in a part.

Data type

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())

Examples
General

137 Nowhere Street, Erewhon 9132

Mappings

rim: n/a
v2: XAD.1 + XAD.2 + XAD.3 + XAD.4 + XAD.5 + XAD.6
rim: ./formatted
vcard: address label parameter

line

0..*

There are no (further) constraints on this element

Element id

Patient.address.line

Short description

Street name, number, direction & P.O. Box etc.

Definition

This component contains the house number, apartment number, street name, street direction, P.O. Box number, delivery hints, and similar address information.

Comments

Note that FHIR strings SHALL NOT exceed 1MB in size

Data type

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())

Examples
General

137 Nowhere Street

Mappings

rim: n/a
v2: XAD.1 + XAD.2 (note: XAD.1 and XAD.2 have different meanings for a company address than for a person address)
rim: AD.part[parttype = AL]
vcard: street
servd: ./StreetAddress (newline delimitted)

city

0..1

There are no (further) constraints on this element

Element id

Patient.address.city

Short description

Name of city, town etc.

Alternate names

Municpality

Definition

The name of the city, town, suburb, village or other community or delivery center.

Comments

Note that FHIR strings SHALL NOT exceed 1MB in size

Data type

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())

Examples
General

Erewhon

Mappings

rim: n/a
v2: XAD.3
rim: AD.part[parttype = CTY]
vcard: locality
servd: ./Jurisdiction

district

0..1

There are no (further) constraints on this element

Element id

Patient.address.district

Short description

District name (aka county)

Alternate names

County

Definition

The name of the administrative area (county).

Comments

District is sometimes known as county, but in some regions 'county' is used in place of city (municipality), so county name should be conveyed in city instead.

Data type

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())

Examples
General

Madison

Mappings

rim: n/a
v2: XAD.9
rim: AD.part[parttype = CNT | CPA]

state

0..1

There are no (further) constraints on this element

Element id

Patient.address.state

Short description

Sub-unit of country (abbreviations ok)

Alternate names

Province, Territory

Definition

Sub-unit of a country with limited sovereignty in a federally organized country. A code may be used if codes are in common use (e.g. US 2 letter state codes).

Comments

Note that FHIR strings SHALL NOT exceed 1MB in size

Data type

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())

Mappings

rim: n/a
v2: XAD.4
rim: AD.part[parttype = STA]
vcard: region
servd: ./Region

postalCode

0..1

There are no (further) constraints on this element

Element id

Patient.address.postalCode

Short description

Postal code for area

Alternate names

Zip

Definition

A postal code designating a region defined by the postal service.

Comments

Note that FHIR strings SHALL NOT exceed 1MB in size

Data type

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())

Examples
General

Mappings

rim: n/a
v2: XAD.5
rim: AD.part[parttype = ZIP]
vcard: code
servd: ./PostalIdentificationCode

country

0..1

There are no (further) constraints on this element

Element id

Patient.address.country

Short description

Country (e.g. can be ISO 3166 2 or 3 letter code)

Definition

Country - a nation as commonly understood or generally accepted.

Comments

ISO 3166 3 letter codes can be used in place of a human readable country name.

Data type

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())

Mappings

rim: n/a
v2: XAD.6
rim: AD.part[parttype = CNT]
vcard: country
servd: ./Country

period

Σ C

0..1

Element id

Patient.address.period

Short description

Time period when address was/is in use

Definition

Time period when address was/is in use.

Requirements

Allows addresses to be placed in historical context.

Comments

Period is not used for a duration (a measure of elapsed time). See Duration.

Data type

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1, training-3

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
per-1: If present, start SHALL have a lower value than end
start.hasValue().not() or end.hasValue().not() or (start <= end)

Examples
General

{
  "start": "2010-03-23",
  "end": "2010-07-01"
}

Mappings

rim: n/a
v2: DR
rim: IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"]
v2: XAD.12 / XAD.13 + XAD.14
rim: ./usablePeriod[type="IVL<TS>"]
servd: ./StartDate and ./EndDate

maritalStatus

0..1

CodeableConceptBinding

There are no (further) constraints on this element

Element id

Patient.maritalStatus

Short description

Marital (civil) status of a patient

Definition

This field contains a patient's most recent marital (civil) status.

Requirements

Most, if not all systems capture it.

Comments

Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination.

Data type

Marital Status Codes (extensible)

Binding

The domestic partnership status of a person.

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())

Mappings

rim: n/a
v2: CE/CNE/CWE
rim: CD
orim: fhir:CodeableConcept rdfs:subClassOf dt:CD
v2: PID-16
rim: player[classCode=PSN]/maritalStatusCode
cda: .patient.maritalStatusCode

multipleBirth[x]

0..1

There are no (further) constraints on this element

Element id

Patient.multipleBirth[x]

Short description

Whether patient is part of a multiple birth

Definition

Indicates whether the patient is part of a multiple (boolean) or indicates the actual birth order (integer).

Requirements

For disambiguation of multiple-birth children, especially relevant where the care provider doesn't meet the patient, such as labs.

Comments

Where the valueInteger is provided, the number is the birth number in the sequence. E.g. The middle birth in triplets would be valueInteger=2 and the third born would have valueInteger=3 If a boolean value was provided for this triplets example, then all 3 patient records would have valueBoolean=true (the ordering is not indicated).

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())

Mappings

rim: n/a
v2: PID-24 (bool), PID-25 (integer)
rim: player[classCode=PSN|ANM and determinerCode=INSTANCE]/multipleBirthInd, player[classCode=PSN|ANM and determinerCode=INSTANCE]/multipleBirthOrderNumber
cda: n/a

multipleBirthBoolean

There are no (further) constraints on this element

Data type

multipleBirthInteger

There are no (further) constraints on this element

Data type

photo

0..*

Attachment

There are no (further) constraints on this element

Element id

Patient.photo

Short description

Image of the patient

Definition

Image of the patient.

Requirements

Many EHR systems have the capability to capture an image of the patient. Fits with newer social media usage too.

Comments

Guidelines:

Use id photos, not clinical photos.
Limit dimensions to thumbnail.
Keep byte count low to ease resource updates.

Data type

Attachment

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
att-1: If the Attachment has data, it SHALL have a contentType
data.empty() or contentType.exists()

Mappings

rim: n/a
v2: ED/RP
rim: ED
v2: OBX-5 - needs a profile
rim: player[classCode=PSN|ANM and determinerCode=INSTANCE]/desc
cda: n/a

contact

0..*

There are no (further) constraints on this element

Element id

Patient.contact

Short description

A contact party (e.g. guardian, partner, friend) for the patient

Definition

A contact party (e.g. guardian, partner, friend) for the patient.

Requirements

Need to track people you can contact about the patient.

Comments

Contact covers all kinds of contact parties: family members, business contacts, guardians, caregivers. Not applicable to register pedigree and family ties beyond use of having contact.

Data type

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
pat-1: SHALL at least contain a contact's details or a reference to an organization
name.exists() or telecom.exists() or address.exists() or organization.exists()

Mappings

rim: n/a
rim: player[classCode=PSN|ANM and determinerCode=INSTANCE]/scopedRole[classCode=CON]
cda: n/a

0..1

There are no (further) constraints on this element

Element id

Patient.contact.id

Short description

Unique id for inter-element referencing

Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Data type

Mappings

rim: n/a

extension

0..*

There are no (further) constraints on this element

Element id

Patient.contact.extension

Short description

Additional content defined by implementations

Alternate names

extensions, user content

Definition

Comments

Data type

Slicing

Unordered, Open, by url(Value)

Extensions are always sliced by (at least) url

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
ext-1: Must have either extensions or value[x], not both
extension.exists() != value.exists()

Mappings

rim: n/a
rim: N/A

modifierExtension

Σ ?! C

0..*

There are no (further) constraints on this element

Element id

Patient.contact.modifierExtension

Short description

Extensions that cannot be ignored even if unrecognized

Alternate names

extensions, user content, modifiers

Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Requirements

Comments

Data type

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
ext-1: Must have either extensions or value[x], not both
extension.exists() != value.exists()

Mappings

rim: n/a
rim: N/A

relationship

0..*

CodeableConceptBinding

There are no (further) constraints on this element

Element id

Patient.contact.relationship

Short description

The kind of relationship

Definition

The nature of the relationship between the patient and the contact person.

Requirements

Used to determine which contact person is the most relevant to approach, depending on circumstances.

Comments

Data type

PatientContactRelationship (extensible)

Binding

The nature of the relationship between a patient and a contact person for that patient.

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())

Mappings

rim: n/a
v2: CE/CNE/CWE
rim: CD
orim: fhir:CodeableConcept rdfs:subClassOf dt:CD
v2: NK1-7, NK1-3
rim: code
cda: n/a

name

0..1

HumanName

There are no (further) constraints on this element

Element id

Patient.contact.name

Short description

A name associated with the contact person

Definition

A name associated with the contact person.

Requirements

Contact persons need to be identified by name, but it is uncommon to need details about multiple other names for that contact person.

Comments

Data type

HumanName

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())

Mappings

rim: n/a
v2: XPN
rim: EN (actually, PN)
servd: ProviderName
v2: NK1-2
rim: name
cda: n/a

telecom

0..*

There are no (further) constraints on this element

Element id

Patient.contact.telecom

Short description

A contact detail for the person

Definition

A contact detail for the person, e.g. a telephone number or an email address.

Requirements

People have (primary) ways to contact them in some way such as phone, email.

Comments

Contact may have multiple ways to be contacted with different uses or applicable periods. May need to have options for contacting the person urgently, and also to help with identification.

Data type

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
cpt-2: A system is required if a value is provided.
value.empty() or system.exists()

Mappings

rim: n/a
v2: XTN
rim: TEL
servd: ContactPoint
v2: NK1-5, NK1-6, NK1-40
rim: telecom
cda: n/a

address

0..1

There are no (further) constraints on this element

Element id

Patient.contact.address

Short description

Address for the contact person

Definition

Address for the contact person.

Requirements

Need to keep track where the contact person can be contacted per postal mail or visited.

Comments

Note: address is intended to describe postal addresses for administrative purposes, not to describe absolute geographical coordinates. Postal addresses are often used as proxies for physical locations (also see the Location resource).

Data type

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())

Mappings

rim: n/a
v2: XAD
rim: AD
servd: Address
v2: NK1-4
rim: addr
cda: n/a

gender

0..1

codeBinding

There are no (further) constraints on this element

Element id

Patient.contact.gender

Short description

male | female | other | unknown

Definition

Administrative Gender - the gender that the contact person is considered to have for administration and record keeping purposes.

Requirements

Needed to address the person correctly.

Comments

Note that FHIR strings SHALL NOT exceed 1MB in size

Data type

AdministrativeGender (required)

Binding

The gender of a person used for administrative purposes.

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())

Mappings

rim: n/a
v2: NK1-15
rim: player[classCode=PSN|ANM and determinerCode=INSTANCE]/administrativeGender
cda: n/a

organization

0..1

There are no (further) constraints on this element

Element id

Patient.contact.organization

Short description

Organization that is associated with the contact

Definition

Organization on behalf of which the contact is acting or for which the contact is working.

Requirements

For guardians or business related contacts, the organization is relevant.

Comments

References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.

Data type

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1, pat-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
ref-1: SHALL have a contained resource if a local reference is provided
reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))

Mappings

rim: n/a
rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity)
v2: NK1-13, NK1-30, NK1-31, NK1-32, NK1-41
rim: scoper
cda: n/a

period

0..1

There are no (further) constraints on this element

Element id

Patient.contact.period

Short description

The period during which this contact person or organization is valid to be contacted relating to this patient

Definition

The period during which this contact person or organization is valid to be contacted relating to this patient.

Comments

Period is not used for a duration (a measure of elapsed time). See Duration.

Data type

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
per-1: If present, start SHALL have a lower value than end
start.hasValue().not() or end.hasValue().not() or (start <= end)

Mappings

rim: n/a
v2: DR
rim: IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"]
rim: effectiveTime
cda: n/a

communication

0..*

There are no (further) constraints on this element

Element id

Patient.communication

Short description

A language which may be used to communicate with the patient about his or her health

Definition

A language which may be used to communicate with the patient about his or her health.

Requirements

If a patient does not speak the local language, interpreters may be required, so languages spoken and proficiency are important things to keep track of both for patient and other persons of interest.

Comments

If no language is specified, this implies that the default local language is spoken. If you need to convey proficiency for multiple modes, then you need multiple Patient.Communication associations. For animals, language is not a relevant field, and should be absent from the instance. If the Patient does not speak the default local language, then the Interpreter Required Standard can be used to explicitly declare that an interpreter is required.

Data type

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())

Mappings

rim: n/a
rim: LanguageCommunication
cda: patient.languageCommunication

0..1

There are no (further) constraints on this element

Element id

Patient.communication.id

Short description

Unique id for inter-element referencing

Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Data type

Mappings

rim: n/a

extension

0..*

There are no (further) constraints on this element

Element id

Patient.communication.extension

Short description

Additional content defined by implementations

Alternate names

extensions, user content

Definition

Comments

Data type

Slicing

Unordered, Open, by url(Value)

Extensions are always sliced by (at least) url

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
ext-1: Must have either extensions or value[x], not both
extension.exists() != value.exists()

Mappings

rim: n/a
rim: N/A

modifierExtension

Σ ?! C

0..*

There are no (further) constraints on this element

Element id

Patient.communication.modifierExtension

Short description

Extensions that cannot be ignored even if unrecognized

Alternate names

extensions, user content, modifiers

Definition

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Requirements

Comments

Data type

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
ext-1: Must have either extensions or value[x], not both
extension.exists() != value.exists()

Mappings

rim: n/a
rim: N/A

language

1..1

CodeableConceptBinding

There are no (further) constraints on this element

Element id

Patient.communication.language

Short description

The language which can be used to communicate with the patient about his or her health

Definition

The ISO-639-1 alpha 2 code in lower case for the language, optionally followed by a hyphen and the ISO-3166-1 alpha 2 code for the region in upper case; e.g. "en" for English, or "en-US" for American English versus "en-EN" for England English.

Requirements

Most systems in multilingual countries will want to convey language. Not all systems actually need the regional dialect.

Comments

The structure aa-BB with this exact casing is one the most widely used notations for locale. However not all systems actually code this but instead have it as free text. Hence CodeableConcept instead of code as the data type.

Data type

Binding

A human language.

CommonLanguages (preferred)

Binding extensions

maxValueSet	AllLanguages

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())

Mappings

rim: n/a
v2: CE/CNE/CWE
rim: CD
orim: fhir:CodeableConcept rdfs:subClassOf dt:CD
v2: PID-15, LAN-2
rim: player[classCode=PSN|ANM and determinerCode=INSTANCE]/languageCommunication/code
cda: .languageCode

preferred

0..1

There are no (further) constraints on this element

Element id

Patient.communication.preferred

Short description

Language preference indicator

Definition

Indicates whether or not the patient prefers this language (over other languages he masters up a certain level).

Requirements

People that master multiple languages up to certain level may prefer one or more, i.e. feel more confident in communicating in a particular language making other languages sort of a fall back method.

Comments

This language is specifically identified for communicating healthcare information.

Data type

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())

Mappings

rim: n/a
v2: PID-15
rim: preferenceInd
cda: .preferenceInd

generalPractitioner

0..*

Reference(Organization | Practitioner | PractitionerRole)

There are no (further) constraints on this element

Element id

Patient.generalPractitioner

Short description

Patient's nominated primary care provider

Alternate names

careProvider

Definition

Patient's nominated care provider.

Comments

This may be the primary care provider (in a GP context), or it may be a patient nominated care manager in a community/disability setting, or even organization that will provide people to perform the care provider roles. It is not to be used to record Care Teams, these should be in a CareTeam resource that may be linked to the CarePlan or EpisodeOfCare resources. Multiple GPs may be recorded against the patient for various reasons, such as a student that has his home GP listed along with the GP at university during the school semesters, or a "fly-in/fly-out" worker that has the onsite GP also included with his home GP to remain aware of medical issues.

Jurisdictions may decide that they can profile this down to 1 if desired, or 1 per type.

Data type

Reference(Organization | Practitioner | PractitionerRole)

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
ref-1: SHALL have a contained resource if a local reference is provided
reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))

Mappings

rim: n/a
rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity)
v2: PD1-4
rim: subjectOf.CareEvent.performer.AssignedEntity
cda: n/a

managingOrganization

Σ C

0..1

There are no (further) constraints on this element

Element id

Patient.managingOrganization

Short description

Organization that is the custodian of the patient record

Definition

Organization that is the custodian of the patient record.

Requirements

Need to know who recognizes this patient record, manages and updates it.

Comments

There is only one managing organization for a specific patient record. Other organizations will have their own Patient record, and may use the Link property to join the records together (or a Person resource which can include confidence ratings for the association).

Data type

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
ref-1: SHALL have a contained resource if a local reference is provided
reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))

Mappings

rim: n/a
rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity)
rim: scoper
cda: .providerOrganization

link

Σ ?!

0..*

There are no (further) constraints on this element

Element id

Patient.link

Short description

Link to another patient resource that concerns the same actual person

Definition

Link to another patient resource that concerns the same actual patient.

Requirements

There are multiple use cases:

Duplicate patient records due to the clerical errors associated with the difficulties of identifying humans consistently, and
Distribution of patient information across multiple servers.

Comments

There is no assumption that linked patient records have mutual links.

Data type

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())

Mappings

rim: n/a
rim: outboundLink
cda: n/a

0..1

There are no (further) constraints on this element

Element id

Patient.link.id

Short description

Unique id for inter-element referencing

Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Data type

Mappings

rim: n/a

extension

0..*

There are no (further) constraints on this element

Element id

Patient.link.extension

Short description

Additional content defined by implementations

Alternate names

extensions, user content

Definition

Comments

Data type

Slicing

Unordered, Open, by url(Value)

Extensions are always sliced by (at least) url

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
ext-1: Must have either extensions or value[x], not both
extension.exists() != value.exists()

Mappings

rim: n/a
rim: N/A

modifierExtension

Σ ?! C

0..*

There are no (further) constraints on this element

Element id

Patient.link.modifierExtension

Short description

Extensions that cannot be ignored even if unrecognized

Alternate names

extensions, user content, modifiers

Definition

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Requirements

Comments

Data type

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
ext-1: Must have either extensions or value[x], not both
extension.exists() != value.exists()

Mappings

rim: n/a
rim: N/A

other

Σ C

1..1

Reference(Patient | RelatedPerson)

There are no (further) constraints on this element

Element id

Patient.link.other

Short description

The other patient or related person resource that the link refers to

Definition

The other patient resource that the link refers to.

Comments

Referencing a RelatedPerson here removes the need to use a Person record to associate a Patient and RelatedPerson as the same individual.

Data type

Reference(Patient | RelatedPerson)

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
ref-1: SHALL have a contained resource if a local reference is provided
reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))

Mappings

rim: n/a
rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity)
v2: PID-3, MRG-1
rim: id
cda: n/a

type

1..1

codeBinding

There are no (further) constraints on this element

Element id

Patient.link.type

Short description

replaced-by | replaces | refer | seealso

Definition

The type of link between this patient resource and another patient resource.

Comments

Note that FHIR strings SHALL NOT exceed 1MB in size

Data type

Binding

The type of link between this patient resource and another patient resource.

LinkType (required)

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())

Mappings

rim: n/a
rim: typeCode
cda: n/a

Observation

FirelyTrainingObservation (Observation)

Observation

Element id

Observation

Short description

Measurements and simple assertions

Alternate names

Vital Signs, Measurement, Results, Tests

Definition

Hearing Test Observation from Firely training day1

Comments

Used for simple observations such as device measurements, laboratory atomic results, vital signs, height, weight, smoking status, comments, etc. Other resources are used to provide context for observations such as laboratory reports, etc.

Data type

Observation

Constraints

dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources
contained.contained.empty()
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated
contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource
contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty()
dom-6: A resource should have narrative for robust management
text.`div`.exists()
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label
contained.meta.security.empty()
obs-7: If Observation.code is the same as an Observation.component.code then the value element associated with the code SHALL NOT be present
value.empty() or component.code.where(coding.intersect(%resource.code.coding).exists()).empty()
obs-6: dataAbsentReason SHALL only be present if Observation.value[x] is not present
dataAbsentReason.empty() or value.empty()
training-1: Fill value or the note field!
value.exists() or note.exists()

Mappings

rim: Entity. Role, or Act
workflow: Event
sct-concept: < 363787002 |Observable entity|
v2: OBX
rim: Observation[classCode=OBS, moodCode=EVN]

0..1

There are no (further) constraints on this element

Element id

Observation.id

Short description

Logical id of this artifact

Definition

The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

Comments

The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

Data type

There are no (further) constraints on this element

Element id

Observation.meta

Short description

Metadata about the resource

Definition

The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

Data type

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())

Mappings

rim: n/a
rim: N/A

implicitRules

Σ ?!

0..1

There are no (further) constraints on this element

Element id

Observation.implicitRules

Short description

A set of rules under which this content was created

Definition

Comments

Data type

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())

Mappings

rim: n/a

language

0..1

codeBinding

There are no (further) constraints on this element

Element id

Observation.language

Short description

Language of the resource content

Definition

The base language in which the resource is written.

Comments

Data type

Binding

A human language.

CommonLanguages (preferred)

Binding extensions

maxValueSet	AllLanguages

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())

Mappings

rim: n/a

text

0..1

There are no (further) constraints on this element

Element id

Observation.text

Short description

Text summary of the resource, for human interpretation

Alternate names

narrative, html, xhtml, display

Definition

Comments

Data type

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())

Mappings

rim: n/a
rim: N/A
rim: Act.text?

contained

0..*

There are no (further) constraints on this element

Element id

Observation.contained

Short description

Contained, inline Resources

Alternate names

inline resources, anonymous resources, contained resources

Definition

Comments

Data type

Mappings

rim: Entity. Role, or Act
rim: N/A

extension

0..*

There are no (further) constraints on this element

Element id

Observation.extension

Short description

Additional content defined by implementations

Alternate names

extensions, user content

Definition

Comments

Data type

Slicing

Unordered, Open, by url(Value)

Extensions are always sliced by (at least) url

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
ext-1: Must have either extensions or value[x], not both
extension.exists() != value.exists()

Mappings

rim: n/a
rim: N/A

testEnvironmentFirelyExtension

0..1

Element id

Observation.extension:testEnvironmentFirelyExtension

Short description

Optional Extensions Element

Alternate names

extensions, user content

Definition

Optional Extension Element - found in all resources.

Comments

Data type

https://example.org/fhir/StructureDefinition/TestEnvironmentFirelyExtension

Extension URL

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
ext-1: Must have either extensions or value[x], not both
extension.exists() != value.exists()

Mappings

rim: n/a
rim: N/A

modifierExtension

?! C

0..*

There are no (further) constraints on this element

Element id

Observation.modifierExtension

Short description

Extensions that cannot be ignored

Alternate names

extensions, user content

Definition

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Requirements

Comments

Data type

Slicing

Unordered, Open, by url(Value)

Extensions are always sliced by (at least) url

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
ext-1: Must have either extensions or value[x], not both
extension.exists() != value.exists()

Mappings

rim: n/a
rim: N/A

identifier

0..*

There are no (further) constraints on this element

Element id

Observation.identifier

Short description

Business Identifier for observation

Definition

A unique identifier assigned to this observation.

Requirements

Allows observations to be distinguished and referenced.

Data type

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())

Mappings

rim: n/a
v2: CX / EI (occasionally, more often EI maps to a resource id or a URL)
rim: II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT]
servd: Identifier
workflow: Event.identifier
w5: FiveWs.identifier
v2: OBX.21 For OBX segments from systems without OBX-21 support a combination of ORC/OBR and OBX must be negotiated between trading partners to uniquely identify the OBX segment. Depending on how V2 has been implemented each of these may be an option: 1) OBR-3 + OBX-3 + OBX-4 or 2) OBR-3 + OBR-4 + OBX-3 + OBX-4 or 2) some other way to uniquely ID the OBR/ORC + OBX-3 + OBX-4.
rim: id

basedOn

Σ C

0..*

There are no (further) constraints on this element

Element id

Observation.basedOn

Short description

Fulfills plan, proposal or order

Alternate names

Fulfills

Definition

A plan, proposal or order that is fulfilled in whole or in part by this event. For example, a MedicationRequest may require a patient to have laboratory test performed before it is dispensed.

Requirements

Allows tracing of authorization for the event and tracking whether proposals/recommendations were acted upon.

Comments

Data type

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
ref-1: SHALL have a contained resource if a local reference is provided
reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))

Mappings

rim: n/a
rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity)
workflow: Event.basedOn
v2: ORC
rim: .inboundRelationship[typeCode=COMP].source[moodCode=EVN]

partOf

Σ C

0..*

There are no (further) constraints on this element

Element id

Observation.partOf

Short description

Part of referenced event

Alternate names

Container

Definition

A larger event of which this particular Observation is a component or step. For example, an observation as part of a procedure.

Comments

To link an Observation to an Encounter use encounter. See the Notes below for guidance on referencing another Observation.

Data type

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
ref-1: SHALL have a contained resource if a local reference is provided
reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))

Mappings

rim: n/a
rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity)
workflow: Event.partOf
v2: Varies by domain
rim: .outboundRelationship[typeCode=FLFS].target

status

Σ ?!

1..1

codeBinding

There are no (further) constraints on this element

Element id

Observation.status

Short description

registered | preliminary | final | amended +

Definition

The status of the result value.

Requirements

Need to track the status of individual results. Some results are finalized before the whole report is finalized.

Comments

This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid.

Data type

Binding

Codes providing the status of an observation.

ObservationStatus (required)

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())

Mappings

rim: n/a
workflow: Event.status
w5: FiveWs.status
sct-concept: < 445584004 |Report by finality status|
v2: OBX-11
rim: status Amended & Final are differentiated by whether it is the subject of a ControlAct event with a type of "revise"

category

0..*

CodeableConceptBinding

There are no (further) constraints on this element

Element id

Observation.category

Short description

Classification of type of observation

Definition

A code that classifies the general type of observation being made.

Requirements

Used for filtering what observations are retrieved and displayed.

Comments

In addition to the required category valueset, this element allows various categorization schemes based on the owner’s definition of the category and effectively multiple categories can be used at once. The level of granularity is defined by the category concepts in the value set.

Data type

ObservationCategoryCodes (preferred)

Binding

Codes for high level observation categories.

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())

Mappings

rim: n/a
v2: CE/CNE/CWE
rim: CD
orim: fhir:CodeableConcept rdfs:subClassOf dt:CD
w5: FiveWs.class
rim: .outboundRelationship[typeCode="COMP].target[classCode="LIST", moodCode="EVN"].code

code

S Σ

1..1

CodeableConceptPattern

Element id

Observation.code

Short description

Type of observation (code / type)

Alternate names

Name

Definition

Describes what was observed. Sometimes this is called the observation "name".

Requirements

Knowing what kind of observation is being made is essential to understanding the observation.

Comments

All code-value and, if present, component.code-component.value pairs need to be taken into account to correctly understand the meaning of the observation.

Data type

Reference(TestCoursePatientFirely)

Binding

Codes identifying names of simple observations.

LOINCCodes (example)

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())

Pattern

{
  "coding": [
    {
      "system": "http://snomed.info/sct",
      "code": "118230007",
      "display": "Hearing finding (finding)"
    }
  ],
  "text": "Hearing finding (finding)"
}

Mappings

rim: n/a
v2: CE/CNE/CWE
rim: CD
orim: fhir:CodeableConcept rdfs:subClassOf dt:CD
workflow: Event.code
w5: FiveWs.what[x]
sct-concept: < 363787002 |Observable entity| OR < 386053000 |Evaluation procedure|
v2: OBX-3
rim: code
sct-attr: 116680003 |Is a|

subject

S Σ C

1..1

Element id

Observation.subject

Short description

Who and/or what the observation is about

Definition

The patient, or group of patients, location, or device this observation is about and into whose record the observation is placed. If the actual focus of the observation is different from the subject (or a sample of, part, or region of the subject), the focus element or the code itself specifies the actual focus of the observation.

Requirements

Observations have no value if you don't know who or what they're about.

Comments

One would expect this element to be a cardinality of 1..1. The only circumstance in which the subject can be missing is when the observation is made by a device that does not know the patient. In this case, the observation SHALL be matched to a patient through some context/channel matching technique, and at this point, the observation should be updated.

Data type

Reference(TestCoursePatientFirely)

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
ref-1: SHALL have a contained resource if a local reference is provided
reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))

Mappings

rim: n/a
rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity)
workflow: Event.subject
w5: FiveWs.subject[x]
v2: PID-3
rim: participation[typeCode=RTGT]
w5: FiveWs.subject

focus

Σ C

0..*

Reference(Resource)

There are no (further) constraints on this element

Element id

Observation.focus

Short description

What the observation is about, when it is not about the subject of record

Definition

The actual focus of an observation when it is not the patient of record representing something or someone associated with the patient such as a spouse, parent, fetus, or donor. For example, fetus observations in a mother's record. The focus of an observation could also be an existing condition, an intervention, the subject's diet, another observation of the subject, or a body structure such as tumor or implanted device. An example use case would be using the Observation resource to capture whether the mother is trained to change her child's tracheostomy tube. In this example, the child is the patient of record and the mother is the focus.

Comments

Typically, an observation is made about the subject - a patient, or group of patients, location, or device - and the distinction between the subject and what is directly measured for an observation is specified in the observation code itself ( e.g., "Blood Glucose") and does not need to be represented separately using this element. Use specimen if a reference to a specimen is required. If a code is required instead of a resource use either bodysite for bodysites or the standard extension focusCode.

Data type

Reference(Resource)

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
ref-1: SHALL have a contained resource if a local reference is provided
reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))

Mappings

rim: n/a
rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity)
w5: FiveWs.subject[x]
v2: OBX-3
rim: participation[typeCode=SBJ]
w5: FiveWs.subject

encounter

Σ C

0..1

Reference(Encounter)

There are no (further) constraints on this element

Element id

Observation.encounter

Short description

Healthcare event during which this observation is made

Alternate names

Context

Definition

The healthcare event (e.g. a patient and healthcare provider interaction) during which this observation is made.

Requirements

For some observations it may be important to know the link between an observation and a particular encounter.

Comments

This will typically be the encounter the event occurred within, but some events may be initiated prior to or after the official completion of an encounter but still be tied to the context of the encounter (e.g. pre-admission laboratory tests).

Data type

Reference(Encounter)

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
ref-1: SHALL have a contained resource if a local reference is provided
reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))

Mappings

rim: n/a
rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity)
workflow: Event.context
w5: FiveWs.context
v2: PV1
rim: inboundRelationship[typeCode=COMP].source[classCode=ENC, moodCode=EVN]

effective[x]

S Σ

1..1

There are no (further) constraints on this element

Element id

Observation.effective[x]

Short description

Clinically relevant time/time-period for observation

Alternate names

Occurrence

Definition

The time or time-period the observed value is asserted as being true. For biological subjects - e.g. human patients - this is usually called the "physiologically relevant time". This is usually either the time of the procedure or of specimen collection, but very often the source of the date/time is not known, only the date/time itself.

Requirements

Knowing when an observation was deemed true is important to its relevance as well as determining trends.

Comments

At least a date should be present unless this observation is a historical report. For recording imprecise or "fuzzy" times (For example, a blood glucose measurement taken "after breakfast") use the Timing datatype which allow the measurement to be tied to regular life events.

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())

Mappings

rim: n/a
workflow: Event.occurrence[x]
w5: FiveWs.done[x]
v2: OBX-14, and/or OBX-19 after v2.4 (depends on who observation made)
rim: effectiveTime

effectiveDateTime

Data type

issued

0..1

instant

There are no (further) constraints on this element

Element id

Observation.issued

Short description

Date/Time this version was made available

Definition

The date and time this version of the observation was made available to providers, typically after the results have been reviewed and verified.

Comments

For Observations that don’t require review and verification, it may be the same as the lastUpdated time of the resource itself. For Observations that do require review and verification for certain updates, it might not be the same as the lastUpdated time of the resource itself due to a non-clinically significant update that doesn’t require the new version to be reviewed and verified again.

Data type

instant

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())

Mappings

rim: n/a
w5: FiveWs.recorded
v2: OBR.22 (or MSH.7), or perhaps OBX-19 (depends on who observation made)
rim: participation[typeCode=AUT].time

performer

Σ C

0..*

There are no (further) constraints on this element

Element id

Observation.performer

Short description

Who is responsible for the observation

Definition

Who was responsible for asserting the observed value as "true".

Requirements

May give a degree of confidence in the observation and also indicates where follow-up questions should be directed.

Comments

Data type

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
ref-1: SHALL have a contained resource if a local reference is provided
reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))

Mappings

rim: n/a
rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity)
workflow: Event.performer.actor
w5: FiveWs.actor
v2: OBX.15 / (Practitioner) OBX-16, PRT-5:PRT-4='RO' / (Device) OBX-18 , PRT-10:PRT-4='EQUIP' / (Organization) OBX-23, PRT-8:PRT-4='PO'
rim: participation[typeCode=PRF]

value[x]

S Σ C

1..1

Element id

Observation.value[x]

Short description

Actual result

Definition

The information determined as a result of making the observation, if the information has a simple value.

Requirements

An observation exists to have a value, though it might not if it is in error, or if it represents a group of observations.

Comments

An observation may have; 1) a single value here, 2) both a value and a set of related or component values, or 3) only a set of related or component values. If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the Notes section below.

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1, obs-7, training-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())

Mappings

rim: n/a
sct-concept: < 441742003 |Evaluation finding|
v2: OBX.2, OBX.5, OBX.6
rim: value
sct-attr: 363714003 |Interprets|

valueBoolean

There are no (further) constraints on this element

Data type

valueCodeableConcept

There are no (further) constraints on this element

Data type

valueDateTime

There are no (further) constraints on this element

Data type

valueInteger

There are no (further) constraints on this element

Data type

valuePeriod

There are no (further) constraints on this element

Data type

valueQuantity

There are no (further) constraints on this element

Data type

valueRange

There are no (further) constraints on this element

Data type

valueRatio

There are no (further) constraints on this element

Data type

valueSampledData

There are no (further) constraints on this element

Data type

valueString

There are no (further) constraints on this element

Data type

valueTime

There are no (further) constraints on this element

Data type

dataAbsentReason

0..1

CodeableConceptBinding

There are no (further) constraints on this element

Element id

Observation.dataAbsentReason

Short description

Why the result is missing

Definition

Provides a reason why the expected value in the element Observation.value[x] is missing.

Requirements

For many results it is necessary to handle exceptional values in measurements.

Comments

Null or exceptional values can be represented two ways in FHIR Observations. One way is to simply include them in the value set and represent the exceptions in the value. For example, measurement values for a serology test could be "detected", "not detected", "inconclusive", or "specimen unsatisfactory".

The alternate way is to use the value element for actual observations and use the explicit dataAbsentReason element to record exceptional values. For example, the dataAbsentReason code "error" could be used when the measurement was not completed. Note that an observation may only be reported if there are values to report. For example differential cell counts values may be reported only when > 0. Because of these options, use-case agreements are required to interpret general observations for null or exceptional values.

Data type

Binding

Codes specifying why the result (Observation.value[x]) is missing.

DataAbsentReason (extensible)

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1, obs-6

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())

Mappings

rim: n/a
v2: CE/CNE/CWE
rim: CD
orim: fhir:CodeableConcept rdfs:subClassOf dt:CD
v2: N/A
rim: value.nullFlavor

interpretation

0..*

CodeableConceptBinding

There are no (further) constraints on this element

Element id

Observation.interpretation

Short description

High, low, normal, etc.

Alternate names

Abnormal Flag

Definition

A categorical assessment of an observation value. For example, high, low, normal.

Requirements

For some results, particularly numeric results, an interpretation is necessary to fully understand the significance of a result.

Comments

Historically used for laboratory results (known as 'abnormal flag' ), its use extends to other use cases where coded interpretations are relevant. Often reported as one or more simple compact codes this element is often placed adjacent to the result value in reports and flow sheets to signal the meaning/normalcy status of the result.

Data type

ObservationInterpretationCodes (extensible)

Binding

Codes identifying interpretations of observations.

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())

Mappings

rim: n/a
v2: CE/CNE/CWE
rim: CD
orim: fhir:CodeableConcept rdfs:subClassOf dt:CD
sct-concept: < 260245000 |Findings values|
v2: OBX-8
rim: interpretationCode
sct-attr: 363713009 |Has interpretation|

note

0..*

Annotation

Element id

Observation.note

Short description

Comments about the observation

Definition

Comments about the observation or the results.

Requirements

Need to be able to provide free text additional information.

Comments

May include general statements about the observation, or statements about significant, unexpected or unreliable results values, or information about its source when relevant to its interpretation.

Data type

Annotation

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1, training-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())

Mappings

rim: n/a
v2: N/A
rim: Act
v2: NTE.3 (partner NTE to OBX, or sometimes another (child?) OBX)
rim: subjectOf.observationEvent[code="annotation"].value

bodySite

0..1

There are no (further) constraints on this element

Element id

Observation.bodySite

Short description

Observed body part

Definition

Indicates the site on the subject's body where the observation was made (i.e. the target site).

Comments

Only used if not implicit in code found in Observation.code. In many systems, this may be represented as a related observation instead of an inline component.

If the use case requires BodySite to be handled as a separate resource (e.g. to identify and track separately) then use the standard extension bodySite.

Data type

SNOMEDCTBodyStructures (example)

Binding

Codes describing anatomical locations. May include laterality.

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())

Mappings

rim: n/a
v2: CE/CNE/CWE
rim: CD
orim: fhir:CodeableConcept rdfs:subClassOf dt:CD
sct-concept: < 123037004 |Body structure|
v2: OBX-20
rim: targetSiteCode
sct-attr: 718497002 |Inherent location|

0..1

There are no (further) constraints on this element

Element id

Observation.bodySite.id

Short description

Unique id for inter-element referencing

Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Data type

Mappings

rim: n/a

extension

1..*

There are no (further) constraints on this element

Element id

Observation.bodySite.extension

Short description

Additional content defined by implementations

Alternate names

extensions, user content

Definition

Comments

Data type

Slicing

Unordered, Open, by url(Value)

Extensions are always sliced by (at least) url

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
ext-1: Must have either extensions or value[x], not both
extension.exists() != value.exists()

Mappings

rim: n/a
rim: N/A

lateralityFirelyExtension

1..1

Element id

Observation.bodySite.extension:lateralityFirelyExtension

Short description

Optional Extensions Element

Alternate names

extensions, user content

Definition

Optional Extension Element - found in all resources.

Comments

Data type

https://example.org/fhir/StructureDefinition/LateralityFirelyExtension

Extension URL

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
ext-1: Must have either extensions or value[x], not both
extension.exists() != value.exists()

Mappings

rim: n/a
rim: N/A

coding

0..*

Coding

There are no (further) constraints on this element

Element id

Observation.bodySite.coding

Short description

Code defined by a terminology system

Definition

A reference to a code defined by a terminology system.

Requirements

Allows for alternative encodings within a code system, and translations to other code systems.

Comments

Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

Data type

Coding

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())

Mappings

rim: n/a
v2: CE/CNE/CWE subset one of the sets of component 1-3 or 4-6
rim: CV
orim: fhir:Coding rdfs:subClassOf dt:CDCoding
v2: C*E.1-8, C*E.10-22
rim: union(., ./translation)
orim: fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding

text

0..1

There are no (further) constraints on this element

Element id

Observation.bodySite.text

Short description

Plain text representation of the concept

Definition

A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

Requirements

The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

Comments

Very often the text is the same as a displayName of one of the codings.

Data type

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())

Mappings

rim: n/a
v2: C*E.9. But note many systems use C*E.2 for this
rim: ./originalText[mediaType/code="text/plain"]/data
orim: fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText

method

1..1

There are no (further) constraints on this element

Element id

Observation.method

Short description

How it was done

Definition

Indicates the mechanism used to perform the observation.

Requirements

In some cases, method can impact results and is thus used for determining whether results can be compared or determining significance of results.

Comments

Only used if not implicit in code for Observation.code.

Data type

Binding

Methods for simple observations.

ObservationMethods (example)

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())

Mappings

rim: n/a
v2: CE/CNE/CWE
rim: CD
orim: fhir:CodeableConcept rdfs:subClassOf dt:CD
v2: OBX-17
rim: methodCode

specimen

0..1

Reference(Specimen)

There are no (further) constraints on this element

Element id

Observation.specimen

Short description

Specimen used for this observation

Definition

The specimen that was used when this observation was made.

Comments

Should only be used if not implicit in code found in Observation.code. Observations are not made on specimens themselves; they are made on a subject, but in many cases by the means of a specimen. Note that although specimens are often involved, they are not always tracked and reported explicitly. Also note that observation resources may be used in contexts that track the specimen explicitly (e.g. Diagnostic Report).

Data type

Reference(Specimen)

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
ref-1: SHALL have a contained resource if a local reference is provided
reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))

Mappings

rim: n/a
rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity)
sct-concept: < 123038009 |Specimen|
v2: SPM segment
rim: participation[typeCode=SPC].specimen
sct-attr: 704319004 |Inherent in|

device

S C

1..1

Reference(Device | DeviceMetric)

There are no (further) constraints on this element

Element id

Observation.device

Short description

(Measurement) Device

Definition

The device used to generate the observation data.

Comments

Note that this is not meant to represent a device involved in the transmission of the result, e.g., a gateway. Such devices may be documented using the Provenance resource where relevant.

Data type

Reference(Device | DeviceMetric)

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
ref-1: SHALL have a contained resource if a local reference is provided
reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))

Mappings

rim: n/a
rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity)
sct-concept: < 49062001 |Device|
v2: OBX-17 / PRT -10
rim: participation[typeCode=DEV]
sct-attr: 424226004 |Using device|

referenceRange

0..*

There are no (further) constraints on this element

Element id

Observation.referenceRange

Short description

Provides guide for interpretation

Definition

Guidance on how to interpret the value by comparison to a normal or recommended range. Multiple reference ranges are interpreted as an "OR". In other words, to represent two distinct target populations, two referenceRange elements would be used.

Requirements

Knowing what values are considered "normal" can help evaluate the significance of a particular result. Need to be able to provide multiple reference ranges for different contexts.

Comments

Most observations only have one generic reference range. Systems MAY choose to restrict to only supplying the relevant reference range based on knowledge about the patient (e.g., specific to the patient's age, gender, weight and other factors), but this might not be possible or appropriate. Whenever more than one reference range is supplied, the differences between them SHOULD be provided in the reference range and/or age properties.

Data type

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
obs-3: Must have at least a low or a high or text
low.exists() or high.exists() or text.exists()

Mappings

rim: n/a
v2: OBX.7
rim: outboundRelationship[typeCode=REFV]/target[classCode=OBS, moodCode=EVN]

0..1

There are no (further) constraints on this element

Element id

Observation.referenceRange.id

Short description

Unique id for inter-element referencing

Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Data type

Mappings

rim: n/a

extension

0..*

There are no (further) constraints on this element

Element id

Observation.referenceRange.extension

Short description

Additional content defined by implementations

Alternate names

extensions, user content

Definition

Comments

Data type

Slicing

Unordered, Open, by url(Value)

Extensions are always sliced by (at least) url

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
ext-1: Must have either extensions or value[x], not both
extension.exists() != value.exists()

Mappings

rim: n/a
rim: N/A

modifierExtension

Σ ?! C

0..*

There are no (further) constraints on this element

Element id

Observation.referenceRange.modifierExtension

Short description

Extensions that cannot be ignored even if unrecognized

Alternate names

extensions, user content, modifiers

Definition

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Requirements

Comments

Data type

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
ext-1: Must have either extensions or value[x], not both
extension.exists() != value.exists()

Mappings

rim: n/a
rim: N/A

low

0..1

There are no (further) constraints on this element

Element id

Observation.referenceRange.low

Short description

Low Range, if relevant

Definition

The value of the low bound of the reference range. The low bound of the reference range endpoint is inclusive of the value (e.g. reference range is >=5 - <=9). If the low bound is omitted, it is assumed to be meaningless (e.g. reference range is <=2.3).

Comments

The context of use may frequently define what kind of quantity this is and therefore what kind of units can be used. The context of use may also restrict the values for the comparator.

Data type

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1, obs-3

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
qty-3: If a code for the unit is present, the system SHALL also be present
code.empty() or system.exists()
sqty-1: The comparator is not used on a SimpleQuantity
comparator.empty()

Mappings

rim: n/a
v2: SN (see also Range) or CQ
rim: PQ, IVL<PQ>, MO, CO, depending on the values
v2: OBX-7
rim: value:IVL_PQ.low

high

0..1

There are no (further) constraints on this element

Element id

Observation.referenceRange.high

Short description

High Range, if relevant

Definition

The value of the high bound of the reference range. The high bound of the reference range endpoint is inclusive of the value (e.g. reference range is >=5 - <=9). If the high bound is omitted, it is assumed to be meaningless (e.g. reference range is >= 2.3).

Comments

The context of use may frequently define what kind of quantity this is and therefore what kind of units can be used. The context of use may also restrict the values for the comparator.

Data type

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1, obs-3

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
qty-3: If a code for the unit is present, the system SHALL also be present
code.empty() or system.exists()
sqty-1: The comparator is not used on a SimpleQuantity
comparator.empty()

Mappings

rim: n/a
v2: SN (see also Range) or CQ
rim: PQ, IVL<PQ>, MO, CO, depending on the values
v2: OBX-7
rim: value:IVL_PQ.high

type

0..1

CodeableConceptBinding

There are no (further) constraints on this element

Element id

Observation.referenceRange.type

Short description

Reference range qualifier

Definition

Codes to indicate the what part of the targeted reference population it applies to. For example, the normal or therapeutic range.

Requirements

Need to be able to say what kind of reference range this is - normal, recommended, therapeutic, etc., - for proper interpretation.

Comments

This SHOULD be populated if there is more than one range. If this element is not present then the normal range is assumed.

Data type

ObservationReferenceRangeMeaningCodes (preferred)

Binding

Code for the meaning of a reference range.

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())

Mappings

rim: n/a
v2: CE/CNE/CWE
rim: CD
orim: fhir:CodeableConcept rdfs:subClassOf dt:CD
sct-concept: < 260245000 |Findings values| OR < 365860008 |General clinical state finding| OR < 250171008 |Clinical history or observation findings| OR < 415229000 |Racial group| OR < 365400002 |Finding of puberty stage| OR < 443938003 |Procedure carried out on subject|
v2: OBX-10
rim: interpretationCode

appliesTo

0..*

There are no (further) constraints on this element

Element id

Observation.referenceRange.appliesTo

Short description

Reference range population

Definition

Codes to indicate the target population this reference range applies to. For example, a reference range may be based on the normal population or a particular sex or race. Multiple appliesTo are interpreted as an "AND" of the target populations. For example, to represent a target population of African American females, both a code of female and a code for African American would be used.

Requirements

Need to be able to identify the target population for proper interpretation.

Comments

This SHOULD be populated if there is more than one range. If this element is not present then the normal population is assumed.

Data type

ObservationReferenceRangeAppliesToCodes (example)

Binding

Codes identifying the population the reference range applies to.

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())

Mappings

rim: n/a
v2: CE/CNE/CWE
rim: CD
orim: fhir:CodeableConcept rdfs:subClassOf dt:CD
sct-concept: < 260245000 |Findings values| OR < 365860008 |General clinical state finding| OR < 250171008 |Clinical history or observation findings| OR < 415229000 |Racial group| OR < 365400002 |Finding of puberty stage| OR < 443938003 |Procedure carried out on subject|
v2: OBX-10
rim: interpretationCode

age

0..1

There are no (further) constraints on this element

Element id

Observation.referenceRange.age

Short description

Applicable age range, if relevant

Definition

The age at which this reference range is applicable. This is a neonatal age (e.g. number of weeks at term) if the meaning says so.

Requirements

Some analytes vary greatly over age.

Comments

The stated low and high value are assumed to have arbitrarily high precision when it comes to determining which values are in the range. I.e. 1.99 is not in the range 2 -> 3.

Data type

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
rng-2: If present, low SHALL have a lower value than high
low.empty() or high.empty() or (low <= high)

Mappings

rim: n/a
v2: NR and also possibly SN (but see also quantity)
rim: IVL<QTY[not(type="TS")]> [lowClosed="true" and highClosed="true"]or URG<QTY[not(type="TS")]>
rim: outboundRelationship[typeCode=PRCN].targetObservationCriterion[code="age"].value

text

0..1

There are no (further) constraints on this element

Element id

Observation.referenceRange.text

Short description

Text based reference range in an observation

Definition

Text based reference range in an observation which may be used when a quantitative range is not appropriate for an observation. An example would be a reference value of "Negative" or a list or table of "normals".

Comments

Note that FHIR strings SHALL NOT exceed 1MB in size

Data type

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())

Mappings

rim: n/a
v2: OBX-7
rim: value:ST

hasMember

Σ C

0..*

Reference(MolecularSequence | Observation | QuestionnaireResponse)

There are no (further) constraints on this element

Element id

Observation.hasMember

Short description

Related resource that belongs to the Observation group

Definition

This observation is a group observation (e.g. a battery, a panel of tests, a set of vital sign measurements) that includes the target as a member of the group.

Comments

When using this element, an observation will typically have either a value or a set of related resources, although both may be present in some cases. For a discussion on the ways Observations can assembled in groups together, see Notes below. Note that a system may calculate results from QuestionnaireResponse into a final score and represent the score as an Observation.

Data type

Reference(MolecularSequence | Observation | QuestionnaireResponse)

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
ref-1: SHALL have a contained resource if a local reference is provided
reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))

Mappings

rim: n/a
rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity)
v2: Relationships established by OBX-4 usage
rim: outBoundRelationship

derivedFrom

S Σ C

0..*

Reference(Media)

Element id

Observation.derivedFrom

Short description

Related measurements the observation is made from

Definition

The target resource that represents a measurement from which this observation value is derived. For example, a calculated anion gap or a fetal measurement based on an ultrasound image.

Comments

All the reference choices that are listed in this element can represent clinical observations and other measurements that may be the source for a derived value. The most common reference will be another Observation. For a discussion on the ways Observations can assembled in groups together, see Notes below.

Data type

Reference(Media)

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
ref-1: SHALL have a contained resource if a local reference is provided
reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))

Mappings

rim: n/a
rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity)
v2: Relationships established by OBX-4 usage
rim: .targetObservation

component

0..*

There are no (further) constraints on this element

Element id

Observation.component

Short description

Component results

Definition

Some observations have multiple component observations. These component observations are expressed as separate code value pairs that share the same attributes. Examples include systolic and diastolic component observations for blood pressure measurement and multiple component observations for genetics observations.

Requirements

Component observations share the same attributes in the Observation resource as the primary observation and are always treated a part of a single observation (they are not separable). However, the reference range for the primary observation value is not inherited by the component values and is required when appropriate for each component observation.

Comments

For a discussion on the ways Observations can be assembled in groups together see Notes below.

Data type

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())

Mappings

rim: n/a
v2: containment by OBX-4?
rim: outBoundRelationship[typeCode=COMP]

0..1

There are no (further) constraints on this element

Element id

Observation.component.id

Short description

Unique id for inter-element referencing

Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Data type

Mappings

rim: n/a

extension

0..*

There are no (further) constraints on this element

Element id

Observation.component.extension

Short description

Additional content defined by implementations

Alternate names

extensions, user content

Definition

Comments

Data type

Slicing

Unordered, Open, by url(Value)

Extensions are always sliced by (at least) url

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
ext-1: Must have either extensions or value[x], not both
extension.exists() != value.exists()

Mappings

rim: n/a
rim: N/A

modifierExtension

Σ ?! C

0..*

There are no (further) constraints on this element

Element id

Observation.component.modifierExtension

Short description

Extensions that cannot be ignored even if unrecognized

Alternate names

extensions, user content, modifiers

Definition

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Requirements

Comments

Data type

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
ext-1: Must have either extensions or value[x], not both
extension.exists() != value.exists()

Mappings

rim: n/a
rim: N/A

code

1..1

There are no (further) constraints on this element

Element id

Observation.component.code

Short description

Type of component observation (code / type)

Definition

Describes what was observed. Sometimes this is called the observation "code".

Requirements

Knowing what kind of observation is being made is essential to understanding the observation.

Comments

All code-value and component.code-component.value pairs need to be taken into account to correctly understand the meaning of the observation.

Data type

Binding

Codes identifying names of simple observations.

LOINCCodes (example)

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())

Mappings

rim: n/a
v2: CE/CNE/CWE
rim: CD
orim: fhir:CodeableConcept rdfs:subClassOf dt:CD
w5: FiveWs.what[x]
sct-concept: < 363787002 |Observable entity| OR < 386053000 |Evaluation procedure|
v2: OBX-3
rim: code

value[x]

0..1

There are no (further) constraints on this element

Element id

Observation.component.value[x]

Short description

Actual component result

Definition

The information determined as a result of making the observation, if the information has a simple value.

Requirements

An observation exists to have a value, though it might not if it is in error, or if it represents a group of observations.

Comments

Used when observation has a set of component observations. An observation may have both a value (e.g. an Apgar score) and component observations (the observations from which the Apgar score was derived). If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the Notes section below.

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())

Mappings

rim: n/a
sct-concept: 363714003 |Interprets| < 441742003 |Evaluation finding|
v2: OBX.2, OBX.5, OBX.6
rim: value
sct-attr: 363714003 |Interprets|

valueBoolean

There are no (further) constraints on this element

Data type

valueCodeableConcept

There are no (further) constraints on this element

Data type

valueDateTime

There are no (further) constraints on this element

Data type

valueInteger

There are no (further) constraints on this element

Data type

valuePeriod

There are no (further) constraints on this element

Data type

valueQuantity

There are no (further) constraints on this element

Data type

valueRange

There are no (further) constraints on this element

Data type

valueRatio

There are no (further) constraints on this element

Data type

valueSampledData

There are no (further) constraints on this element

Data type

valueString

There are no (further) constraints on this element

Data type

valueTime

There are no (further) constraints on this element

Data type

dataAbsentReason

0..1

CodeableConceptBinding

There are no (further) constraints on this element

Element id

Observation.component.dataAbsentReason

Short description

Why the component result is missing

Definition

Provides a reason why the expected value in the element Observation.component.value[x] is missing.

Requirements

For many results it is necessary to handle exceptional values in measurements.

Comments

"Null" or exceptional values can be represented two ways in FHIR Observations. One way is to simply include them in the value set and represent the exceptions in the value. For example, measurement values for a serology test could be "detected", "not detected", "inconclusive", or "test not done".

Data type

Binding

Codes specifying why the result (Observation.value[x]) is missing.

DataAbsentReason (extensible)

Conditions

The cardinality or value of this element may be affected by these constraints: ele-1, obs-6

Constraints

ele-1: All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())

Mappings

rim: n/a
v2: CE/CNE/CWE
rim: CD
orim: fhir:CodeableConcept rdfs:subClassOf dt:CD
v2: N/A
rim: value.nullFlavor

interpretation

0..*

CodeableConceptBinding

There are no (further) constraints on this element

Element id

Observation.component.interpretation

Short description

High, low, normal, etc.

Alternate names

Abnormal Flag

Definition

A categorical assessment of an observation value. For example, high, low, normal.

Requirements

For some results, particularly numeric results, an interpretation is necessary to fully understand the significance of a result.

Comments

Data type