Leitfaden Basis DE (R4)

Organisationsinterner Patienten-Identifier (PID)

Name: IdentifierPid (Simplifier Projekt Link)

Canonical: http://fhir.de/StructureDefinition/identifier-pid

IdentifierPid (Identifier)			Identifier	There are no (further) constraints on this element Element id Identifier Short description An identifier intended for computation Definition An identifier - identifies some entity uniquely and unambiguously. Typically this is used for business identifiers. Data type Identifier Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: CX / EI (occasionally, more often EI maps to a resource id or a URL) rim: II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd: Identifier
id		0..1	string	There are no (further) constraints on this element Element id Identifier.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type string Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Identifier.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
use	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element id Identifier.use Short description usual \| official \| temp \| secondary \| old (If known) Definition The purpose of this identifier. Requirements Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. Comments Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. Data type code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim: n/a v2: N/A rim: Role.code or implied by context
type	Σ	1..1	CodeableConceptBindingPattern	Element id Identifier.type Short description Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. Requirements Allows users to make use of identifiers when the identifier system is not known. Comments This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. Data type CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. IdentifierTypeDeBasis (extensible) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Pattern { "coding": [ { "system": "http://terminology.hl7.org/CodeSystem/v2-0203", "code": "MR" } ] } Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD v2: CX.5 rim: Role.code or implied by context
system	Σ	1..1	uri	There are no (further) constraints on this element Element id Identifier.system Short description The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique. Requirements There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. Comments Identifier.system is always case sensitive. Data type uri Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General http://www.acme.com/identifiers/patient Mappings rim: n/a v2: CX.4 / EI-2-4 rim: II.root or Role.id.root servd: ./IdentifierType
value	Σ	1..1	string	There are no (further) constraints on this element Element id Identifier.value Short description The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system. Comments If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. Data type string Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General 123456 Mappings rim: n/a v2: CX.1 / EI.1 rim: II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd: ./Value
period	Σ I	0..1	Period	There are no (further) constraints on this element Element id Identifier.period Short description Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use. Comments A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration. Data type Period Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` per-1: If present, start SHALL have a lower value than end `start.hasValue().not() or end.hasValue().not() or (start <= end)` Mappings rim: n/a v2: DR rim: IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"] v2: CX.7 + CX.8 rim: Role.effectiveTime or implied by context servd: ./StartDate and ./EndDate
assigner	Σ I	0..1	Reference(Organization)	There are no (further) constraints on this element Element id Identifier.assigner Short description Organization that issued id (may be just text) Definition Organization that issued/manages the identifier. Comments The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. Data type Reference(Organization) Constraints ele-1: All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2: CX.4 / (CX.4,CX.9,CX.10) rim: II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd: ./IdentifierIssuingAuthority

Kontext: Der Identifier kann u.a. in Patient.identifier verwendet werden

Da es beim organisationsinternen Identifier keinen einheitlichen Namensraum gibt, ist hier die Angabe des type-Codes "MR" (Medical Record Number) verpflichtend, um die PID einrichtungsübergreifend als solche erkennen zu können.

Jede Einrichtung muss für ihren Namensraum eine NamingSystem-URL festlegen. Hinweise zur Nomenklatur organisationsinterner Identifier.system-URLs siehe Lokale Namensräume.

Beispiel PID

    <identifier>
        <type>
            <coding>
                <system value="http://terminology.hl7.org/CodeSystem/v2-0203" />
                <code value="MR" />
            </coding>
        </type>
        <system value="http://meine-Organisation.de/fhir/sid/patienten" />
        <value value="12345678" />
    </identifier>