ReteLabBundleRefertato

A persistent identifier for the bundle that won't change as a bundle is copied from server to server.

Persistent identity generally only matters for batches of type Document, Message, and Collection. It would not normally be populated for search and history results and servers ignore Bundle.identifier when processing batches and transactions. For Documents the .identifier SHALL be populated such that the .identifier is globally unique.

If a set of search matches, this is the total number of entries of type 'match' across all pages in the search. It does not include search.mode = 'include' or 'outcome' entries and it does not provide a count of the number of entries in the Bundle.

Only used if the bundle is a search result set. The total does not include resources such as OperationOutcome and included resources, only the total number of matching resources.

A name which details the functional use for this link - see http://www.iana.org/assignments/link-relations/link-relations.xhtml#link-relations-1.

Note that FHIR strings SHALL NOT exceed 1MB in size

The reference details for the link.

see http://en.wikipedia.org/wiki/Uniform_resource_identifier

A series of links that provide context to this entry.

The Absolute URL for the resource. The fullUrl SHALL NOT disagree with the id in the resource - i.e. if the fullUrl is not a urn:uuid, the URL shall be version-independent URL consistent with the Resource.id. The fullUrl is a version independent reference to the resource. The fullUrl element SHALL have a value except that:

• fullUrl can be empty on a POST (although it does not need to when specifying a temporary id for reference in the bundle)
• Results from operations might involve resources that are not identified.

fullUrl might not be unique in the context of a resource. Note that since FHIR resources do not need to be served through the FHIR API, the fullURL might be a URN or an absolute URL that does not end with the logical id of the resource (Resource.id). However, but if the fullUrl does look like a RESTful server URL (e.g. meets the regex, then the 'id' portion of the fullUrl SHALL end with the Resource.id.

Note that the fullUrl is not the same as the canonical URL - it's an absolute url for an endpoint serving the resource (these will happen to have the same value on the canonical server for the resource with the canonical URL).

The Resource for the entry. The purpose/meaning of the resource is determined by the Bundle.type.

Why this entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process.

There is only one mode. In some corner cases, a resource may be included because it is both a match and an include. In these circumstances, 'match' takes precedence.

When searching, the server's search ranking score for the entry.

Servers are not required to return a ranking score. 1 is most relevant, and 0 is least relevant. Often, search results are sorted by score, but the client may specify a different sort order.

See Patient Match for the EMPI search which relates to this element.

In a transaction or batch, this is the HTTP action to be executed for this entry. In a history bundle, this indicates the HTTP action that occurred.

Note that FHIR strings SHALL NOT exceed 1MB in size

The URL for this entry, relative to the root (the address to which the request is posted).

E.g. for a Patient Create, the method would be "POST" and the URL would be "Patient". For a Patient Update, the method would be PUT and the URL would be "Patient/[id]".

If the ETag values match, return a 304 Not Modified status. See the API documentation for "Conditional Read".

Note that FHIR strings SHALL NOT exceed 1MB in size

Only perform the operation if the last updated date matches. See the API documentation for "Conditional Read".

Note: This is intended for where precisely observed times are required, typically system logs etc., and not human-reported times - for them, see date and dateTime (which can be as precise as instant, but is not required to be) below. Time zone is always required

Only perform the operation if the Etag value matches. For more information, see the API section "Managing Resource Contention".

Note that FHIR strings SHALL NOT exceed 1MB in size

Instruct the server not to perform the create if a specified resource already exists. For further information, see the API documentation for "Conditional Create". This is just the query portion of the URL - what follows the "?" (not including the "?").

Note that FHIR strings SHALL NOT exceed 1MB in size

The status code returned by processing this entry. The status SHALL start with a 3 digit HTTP code (e.g. 404) and may contain the standard HTTP description associated with the status code.

Note that FHIR strings SHALL NOT exceed 1MB in size

The location header created by processing this operation, populated if the operation returns a location.

see http://en.wikipedia.org/wiki/Uniform_resource_identifier

The Etag for the resource, if the operation for the entry produced a versioned resource (see Resource Metadata and Versioning and Managing Resource Contention).

Etags match the Resource.meta.versionId. The ETag has to match the version id in the header if a resource is included.

The date/time that the resource was modified on the server.

This has to match the same time in the meta header (meta.lastUpdated) if a resource is included.

An OperationOutcome containing hints and warnings produced as part of processing this entry in a batch or transaction.

For a POST/PUT operation, this is the equivalent outcome that would be returned for prefer = operationoutcome - except that the resource is always returned whether or not the outcome is returned.

This outcome is not used for error responses in batch/transaction, only for hints and warnings. In a batch operation, the error will be in Bundle.entry.response, and for transaction, there will be a single OperationOutcome instead of a bundle in the case of an error.

A series of links that provide context to this entry.

The Absolute URL for the resource. The fullUrl SHALL NOT disagree with the id in the resource - i.e. if the fullUrl is not a urn:uuid, the URL shall be version-independent URL consistent with the Resource.id. The fullUrl is a version independent reference to the resource. The fullUrl element SHALL have a value except that:

• fullUrl can be empty on a POST (although it does not need to when specifying a temporary id for reference in the bundle)
• Results from operations might involve resources that are not identified.

fullUrl might not be unique in the context of a resource. Note that since FHIR resources do not need to be served through the FHIR API, the fullURL might be a URN or an absolute URL that does not end with the logical id of the resource (Resource.id). However, but if the fullUrl does look like a RESTful server URL (e.g. meets the regex, then the 'id' portion of the fullUrl SHALL end with the Resource.id.

Note that the fullUrl is not the same as the canonical URL - it's an absolute url for an endpoint serving the resource (these will happen to have the same value on the canonical server for the resource with the canonical URL).

Why this entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process.

There is only one mode. In some corner cases, a resource may be included because it is both a match and an include. In these circumstances, 'match' takes precedence.

When searching, the server's search ranking score for the entry.

Servers are not required to return a ranking score. 1 is most relevant, and 0 is least relevant. Often, search results are sorted by score, but the client may specify a different sort order.

See Patient Match for the EMPI search which relates to this element.

In a transaction or batch, this is the HTTP action to be executed for this entry. In a history bundle, this indicates the HTTP action that occurred.

Note that FHIR strings SHALL NOT exceed 1MB in size

The URL for this entry, relative to the root (the address to which the request is posted).

E.g. for a Patient Create, the method would be "POST" and the URL would be "Patient". For a Patient Update, the method would be PUT and the URL would be "Patient/[id]".

If the ETag values match, return a 304 Not Modified status. See the API documentation for "Conditional Read".

Note that FHIR strings SHALL NOT exceed 1MB in size

Only perform the operation if the last updated date matches. See the API documentation for "Conditional Read".

Note: This is intended for where precisely observed times are required, typically system logs etc., and not human-reported times - for them, see date and dateTime (which can be as precise as instant, but is not required to be) below. Time zone is always required

Only perform the operation if the Etag value matches. For more information, see the API section "Managing Resource Contention".

Note that FHIR strings SHALL NOT exceed 1MB in size

Instruct the server not to perform the create if a specified resource already exists. For further information, see the API documentation for "Conditional Create". This is just the query portion of the URL - what follows the "?" (not including the "?").

Note that FHIR strings SHALL NOT exceed 1MB in size

The status code returned by processing this entry. The status SHALL start with a 3 digit HTTP code (e.g. 404) and may contain the standard HTTP description associated with the status code.

Note that FHIR strings SHALL NOT exceed 1MB in size

The location header created by processing this operation, populated if the operation returns a location.

see http://en.wikipedia.org/wiki/Uniform_resource_identifier

The Etag for the resource, if the operation for the entry produced a versioned resource (see Resource Metadata and Versioning and Managing Resource Contention).

Etags match the Resource.meta.versionId. The ETag has to match the version id in the header if a resource is included.

The date/time that the resource was modified on the server.

This has to match the same time in the meta header (meta.lastUpdated) if a resource is included.

An OperationOutcome containing hints and warnings produced as part of processing this entry in a batch or transaction.

For a POST/PUT operation, this is the equivalent outcome that would be returned for prefer = operationoutcome - except that the resource is always returned whether or not the outcome is returned.

This outcome is not used for error responses in batch/transaction, only for hints and warnings. In a batch operation, the error will be in Bundle.entry.response, and for transaction, there will be a single OperationOutcome instead of a bundle in the case of an error.

A series of links that provide context to this entry.

The Absolute URL for the resource. The fullUrl SHALL NOT disagree with the id in the resource - i.e. if the fullUrl is not a urn:uuid, the URL shall be version-independent URL consistent with the Resource.id. The fullUrl is a version independent reference to the resource. The fullUrl element SHALL have a value except that:

• fullUrl can be empty on a POST (although it does not need to when specifying a temporary id for reference in the bundle)
• Results from operations might involve resources that are not identified.

fullUrl might not be unique in the context of a resource. Note that since FHIR resources do not need to be served through the FHIR API, the fullURL might be a URN or an absolute URL that does not end with the logical id of the resource (Resource.id). However, but if the fullUrl does look like a RESTful server URL (e.g. meets the regex, then the 'id' portion of the fullUrl SHALL end with the Resource.id.

Note that the fullUrl is not the same as the canonical URL - it's an absolute url for an endpoint serving the resource (these will happen to have the same value on the canonical server for the resource with the canonical URL).

Why this entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process.

There is only one mode. In some corner cases, a resource may be included because it is both a match and an include. In these circumstances, 'match' takes precedence.

When searching, the server's search ranking score for the entry.

Servers are not required to return a ranking score. 1 is most relevant, and 0 is least relevant. Often, search results are sorted by score, but the client may specify a different sort order.

See Patient Match for the EMPI search which relates to this element.

In a transaction or batch, this is the HTTP action to be executed for this entry. In a history bundle, this indicates the HTTP action that occurred.

Note that FHIR strings SHALL NOT exceed 1MB in size

The URL for this entry, relative to the root (the address to which the request is posted).

E.g. for a Patient Create, the method would be "POST" and the URL would be "Patient". For a Patient Update, the method would be PUT and the URL would be "Patient/[id]".

If the ETag values match, return a 304 Not Modified status. See the API documentation for "Conditional Read".

Note that FHIR strings SHALL NOT exceed 1MB in size

Only perform the operation if the last updated date matches. See the API documentation for "Conditional Read".

Note: This is intended for where precisely observed times are required, typically system logs etc., and not human-reported times - for them, see date and dateTime (which can be as precise as instant, but is not required to be) below. Time zone is always required

Only perform the operation if the Etag value matches. For more information, see the API section "Managing Resource Contention".

Note that FHIR strings SHALL NOT exceed 1MB in size

Instruct the server not to perform the create if a specified resource already exists. For further information, see the API documentation for "Conditional Create". This is just the query portion of the URL - what follows the "?" (not including the "?").

Note that FHIR strings SHALL NOT exceed 1MB in size

The status code returned by processing this entry. The status SHALL start with a 3 digit HTTP code (e.g. 404) and may contain the standard HTTP description associated with the status code.

Note that FHIR strings SHALL NOT exceed 1MB in size

The location header created by processing this operation, populated if the operation returns a location.

see http://en.wikipedia.org/wiki/Uniform_resource_identifier

The Etag for the resource, if the operation for the entry produced a versioned resource (see Resource Metadata and Versioning and Managing Resource Contention).

Etags match the Resource.meta.versionId. The ETag has to match the version id in the header if a resource is included.

The date/time that the resource was modified on the server.

This has to match the same time in the meta header (meta.lastUpdated) if a resource is included.

An OperationOutcome containing hints and warnings produced as part of processing this entry in a batch or transaction.

For a POST/PUT operation, this is the equivalent outcome that would be returned for prefer = operationoutcome - except that the resource is always returned whether or not the outcome is returned.

This outcome is not used for error responses in batch/transaction, only for hints and warnings. In a batch operation, the error will be in Bundle.entry.response, and for transaction, there will be a single OperationOutcome instead of a bundle in the case of an error.

A series of links that provide context to this entry.

The Absolute URL for the resource. The fullUrl SHALL NOT disagree with the id in the resource - i.e. if the fullUrl is not a urn:uuid, the URL shall be version-independent URL consistent with the Resource.id. The fullUrl is a version independent reference to the resource. The fullUrl element SHALL have a value except that:

• fullUrl can be empty on a POST (although it does not need to when specifying a temporary id for reference in the bundle)
• Results from operations might involve resources that are not identified.

fullUrl might not be unique in the context of a resource. Note that since FHIR resources do not need to be served through the FHIR API, the fullURL might be a URN or an absolute URL that does not end with the logical id of the resource (Resource.id). However, but if the fullUrl does look like a RESTful server URL (e.g. meets the regex, then the 'id' portion of the fullUrl SHALL end with the Resource.id.

Note that the fullUrl is not the same as the canonical URL - it's an absolute url for an endpoint serving the resource (these will happen to have the same value on the canonical server for the resource with the canonical URL).

Source of the definition for the extension code - a logical name or a URL.

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

The purpose of this identifier.

Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

Allows users to make use of identifiers when the identifier system is not known.

This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

Deve essere uno dei seguenti: https://fhir.siss.regione.lombardia.it/CodeSystem/IdentificativoDocTestuale https://fhir.siss.regione.lombardia.it/CodeSystem/IdentificativoDocStrutturato https://fhir.siss.regione.lombardia.it/CodeSystem/LinkDocTestuale https://fhir.siss.regione.lombardia.it/CodeSystem/LinkDocStrutturato

There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

Identifier.system is always case sensitive.

The portion of the identifier typically relevant to the user and which is unique within the context of the system.

If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

Time period during which identifier is/was valid for use.

A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times").

Period is not used for a duration (a measure of elapsed time). See Duration.

Organization that issued/manages the identifier.

The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.

Può assumere i seguenti valori:

• 01: standard
• 02: integrativo
• 03: sostitutivo
• 04: annullativo

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Corrispondente campo HL7 secondo specifiche regionali: OBX-3.3

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Descrive la nota collegata al documento corrispondente campo HL7 secondo specifiche regionali: NTE. Può descrivere le seguenti casistiche:

• hashCDA
• hashReferto
• algoritmoHashCDA
• algoritmoHashReferto
• validazioneSchema
• sizeDocumentoReferto
• sizeDocumentoCDA
• linguaggioDocumentoReferto
• linguaggioDocumentoCDA
• versioneXSLT
• consultazioneElettronica
• sezioneFascicolo
• idTipoDocumentoLOINC
• idSetDocumentoPadre
• nVersionePadre
• flagInviareAlSiss
• prioritaNotifica
• idRichiedente
• idErogatore
• retePatologia
• marcaTemporale
• Codici di oscuramento (10,20,30,40,50, autorizzazioneConsultazione)
• NOTEREPERIBILITA
• dceSuppService^dip
• modRef^dip
• idRefertoService^dip
• codici relativi alla tabella "Tabella SISS - Attributi Specifici"

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

The purpose of this identifier.

Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

Allows users to make use of identifiers when the identifier system is not known.

This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

Identifier.system is always case sensitive.

The portion of the identifier typically relevant to the user and which is unique within the context of the system.

If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

Time period during which identifier is/was valid for use.

A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times").

Period is not used for a duration (a measure of elapsed time). See Duration.

Organization that issued/manages the identifier.

The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.

The purpose of this identifier.

Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

Allows users to make use of identifiers when the identifier system is not known.

This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

Identifier.system is always case sensitive.

The portion of the identifier typically relevant to the user and which is unique within the context of the system.

If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

Time period during which identifier is/was valid for use.

A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times").

Period is not used for a duration (a measure of elapsed time). See Duration.

Organization that issued/manages the identifier.

The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.

Reference al profilo ReteLabServiceRequestRichiestaEsamiLab

This allows tracing of authorization for the report and tracking whether proposals/recommendations were acted upon.

Note: Usually there is one test request for each result, however in some circumstances multiple test requests may be represented using a single test result resource. Note that there are also cases where one request leads to multiple reports.

The status of the diagnostic report.

Diagnostic services routinely issue provisional/incomplete reports, and sometimes withdraw previously released reports.

Corrispondente campo HL7 secondo specifiche regionali: TXA-17

Valore fisso su LAB --> Laboratorio

Multiple categories are allowed using various categorization schemes. The level of granularity is defined by the category concepts in the value set. More fine-grained filtering can be performed using the metadata and/or terminology hierarchy in DiagnosticReport.code.

A reference to a code defined by a terminology system.

Allows for alternative encodings within a code system, and translations to other code systems.

Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

A reference to a code defined by a terminology system.

Allows for alternative encodings within a code system, and translations to other code systems.

Corrispondente campo HL7 secondo specifiche regionali: OBX-3.2.

A reference to a code defined by a terminology system.

Allows for alternative encodings within a code system, and translations to other code systems.

Corrispondente campo HL7 secondo specifiche regionali: OBX-3.5.

A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

Very often the text is the same as a displayName of one of the codings.

Reference al profilo ReteLabPatientCittadino

SHALL know the subject context.

References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.

The healthcare event (e.g. a patient and healthcare provider interaction) which this DiagnosticReport is about.

Links the request to the Encounter context.

This will typically be the encounter the event occurred within, but some events may be initiated prior to or after the official completion of an encounter but still be tied to the context of the encounter (e.g. pre-admission laboratory tests).

Obbligatorio per documenti firmati e/o marcati. Formato: YYYY-MM-DDThh:mm:ss+zz:zz secondo lo standard FHIR

Clinicians need to be able to check the date that the report was released.

Corrispondente campo HL7 secondo specifiche regionali: TXA-22

The diagnostic service that is responsible for issuing the report.

Need to know whom to contact if there are queries about the results. Also may need to track the source of reports for secondary data analysis.

This is not necessarily the source of the atomic data items or the entity that interpreted the results. It is the entity that takes responsibility for the clinical report.

Reference al profilo ReteLabPractitionerRoleMedico

Need to know whom to contact if there are queries about the results. Also may need to track the source of reports for secondary data analysis.

Corrispondente campo HL7 secondo specifiche regionali: TXA-11 e PV1-8

Details about the specimens on which this diagnostic report is based.

Need to be able to report information about the collected specimens on which the report is based.

If the specimen is sufficiently specified with a code in the test result name, then this additional data may be redundant. If there are multiple specimens, these may be represented per observation or group.

Observations that are part of this diagnostic report.

Need to support individual results, or groups of results, where the result grouping is arbitrary, but meaningful.

Observations can contain observations.

One or more links to full details of any imaging performed during the diagnostic investigation. Typically, this is imaging performed by DICOM enabled modalities, but this is not required. A fully enabled PACS viewer can use this information to provide views of the source images.

ImagingStudy and the image element are somewhat overlapping - typically, the list of image references in the image element will also be found in one of the imaging study resources. However, each caters to different types of displays for different types of purposes. Neither, either, or both may be provided.

A comment about the image. Typically, this is used to provide an explanation for why the image is included, or to draw the viewer's attention to important features.

The provider of the report should make a comment about each image included in the report.

The comment should be displayed with the image. It would be common for the report to include additional discussion of the image contents in other sections such as the conclusion.

Reference to the image source.

References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.

Concise and clinically contextualized summary conclusion (interpretation/impression) of the diagnostic report.

Need to be able to provide a conclusion that is not lost among the basic result data.

Note that FHIR strings SHALL NOT exceed 1MB in size

One or more codes that represent the summary conclusion (interpretation/impression) of the diagnostic report.

Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination.

tipo fisico del documento (obbligatorio).

Valori ammessi:

• “PDF”
• “PDF-CDA2”
• “PDFA3”

Processors of the data need to be able to know how to interpret the data.

Corrispondente campo HL7 secondo specifiche regionali: OBX-3 CE-6

OBX-5 : Contenuto da archiviare (documento o link). La compilazione del campo varia in funzione del contenuto: Documento OBX-5.2 = multipart OBX-5.3 = Octed-stream OBX-5.4 = Base64 OBX-5.5 = documento codificato in Base64

The human language of the content. The value can be any valid value according to BCP 47.

Users need to be able to choose between the languages in a set of attachments.

Note that FHIR strings SHALL NOT exceed 1MB in size

Tale campo sarà sempre valorizzato come "Documento codificato in base64"

The data needs to able to be transmitted inline.

Corrispondente campo HL7 secondo specifiche regionali: OBX-5.5

A location where the data can be accessed.

The data needs to be transmitted by reference.

If both data and url are provided, the url SHALL point to the same content as the data contains. Urls may be relative references or may reference transient locations such as a wrapping envelope using cid: though this has ramifications for using signatures. Relative URLs are interpreted relative to the service url, like a resource reference, rather than relative to the resource itself. If a URL is provided, it SHALL resolve to actual data.