Online Consultation to Community Pharmacy - Pilot Specification

Usually, this is used for documents other than those defined by FHIR.

• dom-2:If the resource is contained in another resource, it SHALL NOT contain nested Resources
  contained.contained.empty()
• dom-1:If the resource is contained in another resource, it SHALL NOT contain any narrative
  contained.text.empty()
• dom-4:If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated
  contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()
• dom-3:If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource
  contained.where(('#'+id in %resource.descendants().reference).not()).empty()

• rim:Entity. Role, or Act
• rim:Document[classCode="DOC" and moodCode="EVN"]
• w5:infrastructure.documents

The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

• ele-1:All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())

• rim:n/a

• ele-1:All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())

• rim:n/a
• rim:N/A

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element.

This element is labelled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation.

• ele-1:All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())

• rim:n/a

A human language.

Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

• ele-1:All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())

• rim:n/a

Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded in formation is added later.

• ele-1:All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())

• rim:n/a
• rim:N/A
• rim:Act.text?

This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again.

• rim:Entity. Role, or Act
• rim:N/A

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

• ele-1:All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())
• ext-1:Must have either extensions or value[x], not both
  extension.exists() != value.exists()

• rim:n/a
• rim:N/A

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

• ele-1:All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())
• ext-1:Must have either extensions or value[x], not both
  extension.exists() != value.exists()

• rim:n/a
• rim:N/A

The structure and format of this Id shall be consistent with the specification corresponding to the formatCode attribute. (e.g. for a DICOM standard document a 64-character numeric UID, for an HL7 CDA format a serialization of the CDA Document Id extension and root in the form "oid^extension", where OID is a 64 digits max, and the Id is a 16 UTF-8 char max. If the OID is coded without the extension then the '^' character shall not be included.).

CDA Document Id extension and root.

• ele-1:All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())

• rim:n/a
• v2:CX / EI (occasionally, more often EI maps to a resource id or a URL)
• rim:II - see see identifier pattern at http://wiki.hl7.org/index.php?title=Common_Design_Patterns#Identifier_Pattern for relevant discussion. The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT]
• servd:Identifier
• v2:TXA-12
• rim:.id
• xds:DocumentEntry.uniqueId
• w5:id

Note that FHIR strings may not exceed 1MB in size

• ele-1:All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())

• rim:n/a

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

• ele-1:All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())
• ext-1:Must have either extensions or value[x], not both
  extension.exists() != value.exists()

• rim:n/a
• rim:N/A

Identifies the purpose for this identifier, if known .

Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one. Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

• ele-1:All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())

• rim:n/a
• v2:N/A
• rim:Role.code or implied by context

A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.

Allows users to make use of identifiers when the identifier system is not known.

This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage.

Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

• ele-1:All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())

• rim:n/a
• v2:CE/CNE/CWE
• rim:CD
• orim:fhir:CodeableConcept rdfs:subClassOf dt:CD
• v2:CX.5
• rim:Role.code or implied by context

There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

see http://en.wikipedia.org/wiki/Uniform_resource_identifier

• ele-1:All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())

• rim:n/a
• v2:CX.4 / EI-2-4
• rim:II.root or Role.id.root
• servd:./IdentifierType

If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension.

• ele-1:All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())

• rim:n/a
• v2:CX.1 / EI.1
• rim:II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root)
• servd:./Value

This is not a duration - that's a measure of time (a separate type), but a duration that occurs at a fixed value of time. A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). If duration is required, specify the type as Interval|Duration.

• ele-1:All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())
• per-1:If present, start SHALL have a lower value than end
  start.empty() or end.empty() or (start <= end)

• rim:n/a
• v2:DR
• rim:IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"]
• v2:CX.7 + CX.8
• rim:Role.effectiveTime or implied by context
• servd:./StartDate and ./EndDate

The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.

• ele-1:All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())
• ref-1:SHALL have a contained resource if a local reference is provided
  reference.startsWith('#').not() or (reference.substring(1).trace('url') in %resource.contained.id.trace('ids'))

• rim:n/a
• rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity)
• v2:CX.4 / (CX.4,CX.9,CX.10)
• rim:II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper
• servd:./IdentifierIssuingAuthority

• ele-1:All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())

• rim:n/a
• v2:CX / EI (occasionally, more often EI maps to a resource id or a URL)
• rim:II - see see identifier pattern at http://wiki.hl7.org/index.php?title=Common_Design_Patterns#Identifier_Pattern for relevant discussion. The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT]
• servd:Identifier
• v2:TXA-16?
• rim:.id / .setId
• xds:DocumentEntry.entryUUID
• w5:id

Note that FHIR strings may not exceed 1MB in size

• ele-1:All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())

• rim:n/a

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

• ele-1:All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())
• ext-1:Must have either extensions or value[x], not both
  extension.exists() != value.exists()

• rim:n/a
• rim:N/A

Identifies the purpose for this identifier, if known .

Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one. Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

• ele-1:All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())

• rim:n/a
• v2:N/A
• rim:Role.code or implied by context

A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.

Allows users to make use of identifiers when the identifier system is not known.

This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage.

Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

• ele-1:All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())

• rim:n/a
• v2:CE/CNE/CWE
• rim:CD
• orim:fhir:CodeableConcept rdfs:subClassOf dt:CD
• v2:CX.5
• rim:Role.code or implied by context

There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

see http://en.wikipedia.org/wiki/Uniform_resource_identifier

• ele-1:All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())

• rim:n/a
• v2:CX.4 / EI-2-4
• rim:II.root or Role.id.root
• servd:./IdentifierType

If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension.

• ele-1:All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())

• rim:n/a
• v2:CX.1 / EI.1
• rim:II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root)
• servd:./Value

This is not a duration - that's a measure of time (a separate type), but a duration that occurs at a fixed value of time. A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). If duration is required, specify the type as Interval|Duration.

• ele-1:All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())
• per-1:If present, start SHALL have a lower value than end
  start.empty() or end.empty() or (start <= end)

• rim:n/a
• v2:DR
• rim:IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"]
• v2:CX.7 + CX.8
• rim:Role.effectiveTime or implied by context
• servd:./StartDate and ./EndDate

The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.

• ele-1:All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())
• ref-1:SHALL have a contained resource if a local reference is provided
  reference.startsWith('#').not() or (reference.substring(1).trace('url') in %resource.contained.id.trace('ids'))

• rim:n/a
• rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity)
• v2:CX.4 / (CX.4,CX.9,CX.10)
• rim:II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper
• servd:./IdentifierIssuingAuthority

The status of the document reference.

This is the status of the DocumentReference object, which might be independent from the docStatus element.

This element is labeled as a modifier because the status contains the codes that mark the document or reference as not currently valid.

• ele-1:All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())

• rim:n/a
• v2:TXA-19
• rim:interim: .completionCode="IN" & ./statusCode[isNormalDatatype()]="active"; final: .completionCode="AU" && ./statusCode[isNormalDatatype()]="complete" and not(./inboundRelationship[typeCode="SUBJ" and isNormalActRelationship()]/source[subsumesCode("ActClass#CACT") and moodCode="EVN" and domainMember("ReviseDocument", code) and isNormalAct()]); amended: .completionCode="AU" && ./statusCode[isNormalDatatype()]="complete" and ./inboundRelationship[typeCode="SUBJ" and isNormalActRelationship()]/source[subsumesCode("ActClass#CACT") and moodCode="EVN" and domainMember("ReviseDocument", code) and isNormalAct() and statusCode="completed"]; withdrawn : .completionCode=NI && ./statusCode[isNormalDatatype()]="obsolete"
• xds:DocumentEntry status
• w5:status

Status of the underlying document.

The document that is pointed to might be in various lifecycle states.

• ele-1:All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())

• rim:n/a
• v2:TXA-17
• rim:.statusCode
• w5:status

SNOMED CT UK document type

Key metadata element describing the document, used in searching/filtering.

• ele-1:All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())

• rim:n/a
• v2:CE/CNE/CWE
• rim:CD
• orim:fhir:CodeableConcept rdfs:subClassOf dt:CD
• v2:TXA-2
• rim:./code
• xds:DocumentEntry.type
• w5:class

Note that FHIR strings may not exceed 1MB in size

• ele-1:All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())

• rim:n/a

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

• ele-1:All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())
• ext-1:Must have either extensions or value[x], not both
  extension.exists() != value.exists()

• rim:n/a
• rim:N/A

Allows for translations and alternate encodings within a code system. Also supports communication of the same instance to systems requiring different encodings.

Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

• ele-1:All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())

• rim:n/a
• v2:CE/CNE/CWE subset one of the sets of component 1-3 or 4-6
• rim:CV
• orim:fhir:Coding rdfs:subClassOf dt:CDCoding
• v2:C*E.1-8, C*E.10-22
• rim:union(., ./translation)
• orim:fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding

Note that FHIR strings may not exceed 1MB in size

• ele-1:All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())

• rim:n/a

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

• ele-1:All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())
• ext-1:Must have either extensions or value[x], not both
  extension.exists() != value.exists()

• rim:n/a
• rim:N/A

Need to be unambiguous about the source of the definition of the symbol.

The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously.

• ele-1:All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())

• rim:n/a
• v2:C*E.3
• rim:./codeSystem
• orim:fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem

Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.

• ele-1:All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())

• rim:n/a
• v2:C*E.7
• rim:./codeSystemVersion
• orim:fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion

Need to refer to a particular code in the system.

Note that FHIR strings may not exceed 1MB in size

• ele-1:All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())

• rim:n/a
• v2:C*E.1
• rim:./code
• orim:fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code

Need to be able to carry a human-readable meaning of the code for readers that do not know the system.

Note that FHIR strings may not exceed 1MB in size

• ele-1:All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())

• rim:n/a
• v2:C*E.2 - but note this is not well followed
• rim:CV.displayName
• orim:fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName

This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.

Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.

• ele-1:All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())

• rim:n/a
• v2:Sometimes implied by being first
• rim:CD.codingRationale
• orim:fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]

The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

Very often the text is the same as a displayName of one of the codings.

• ele-1:All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())

• rim:n/a
• v2:C*E.9. But note many systems use C*E.2 for this
• rim:./originalText[mediaType/code="text/plain"]/data
• orim:fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText

High-level kind of a clinical document at a macro level.

Helps humans to assess whether the document is of interest when viewing a list of documents.

This is a metadata field from XDS/MHD.

• ele-1:All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())

• rim:n/a
• v2:CE/CNE/CWE
• rim:CD
• orim:fhir:CodeableConcept rdfs:subClassOf dt:CD
• rim:.outboundRelationship[typeCode="COMP].target[classCode="LIST", moodCode="EVN"].code
• xds:DocumentEntry.class
• w5:class

References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.

• ele-1:All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())
• ref-1:SHALL have a contained resource if a local reference is provided
  reference.startsWith('#').not() or (reference.substring(1).trace('url') in %resource.contained.id.trace('ids'))

• rim:n/a
• rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity)
• v2:PID-3 (No standard way to define a Practitioner or Group subject in HL7 v2 MDM message)
• rim:.participation[typeCode="SBJ"].role[typeCode="PAT"]
• xds:DocumentEntry.patientId
• w5:who.focus

Creation time is used for tracking, organizing versions and searching. This is the creation time of the document, not the source material on which it is based.

• ele-1:All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())

• rim:n/a
• v2:TXA-6
• rim:.effectiveTime[type="TS"]
• xds:DocumentEntry.submissionTime
• w5:when.done

Referencing/indexing time is used for tracking, organizing versions and searching.

• ele-1:All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())

• rim:n/a
• rim:.availabilityTime[type="TS"]
• xds:DocumentEntry.submissionTime
• w5:when.recorded

Not necessarily who did the actual data entry (i.e. typist) it in or who was the source (informant).

• ele-1:All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())
• ref-1:SHALL have a contained resource if a local reference is provided
  reference.startsWith('#').not() or (reference.substring(1).trace('url') in %resource.contained.id.trace('ids'))

• rim:n/a
• rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity)
• v2:TXA-9 (No standard way to indicate a Device in HL7 v2 MDM message)
• rim:.participation[typeCode="AUT"].role[classCode="ASSIGNED"]
• xds:DocumentEntry.author
• w5:who.author

Represents a participant within the author institution who has legally authenticated or attested the document. Legal authentication implies that a document has been signed manually or electronically by the legal Authenticator.

• ele-1:All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())
• ref-1:SHALL have a contained resource if a local reference is provided
  reference.startsWith('#').not() or (reference.substring(1).trace('url') in %resource.contained.id.trace('ids'))

• rim:n/a
• rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity)
• v2:TXA-10
• rim:.participation[typeCode="AUTHEN"].role[classCode="ASSIGNED"]
• xds:DocumentEntry.legalAuthenticator
• w5:who.witness

Identifies the logical organization to go to find the current version, where to report issues, etc. This is different from the physical location of the document, which is the technical location of the document, which host may be delegated to the management of some other organization.

• ele-1:All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())
• ref-1:SHALL have a contained resource if a local reference is provided
  reference.startsWith('#').not() or (reference.substring(1).trace('url') in %resource.contained.id.trace('ids'))

• rim:n/a
• rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity)
• rim:.participation[typeCode="RCV"].role[classCode="CUST"].scoper[classCode="ORG" and determinerCode="INST"]

This element is labeled as a modifier because documents that append to other documents are incomplete on their own.

• ele-1:All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())

• rim:n/a
• rim:.outboundRelationship

Note that FHIR strings may not exceed 1MB in size

• ele-1:All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())

• rim:n/a

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

• ele-1:All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())
• ext-1:Must have either extensions or value[x], not both
  extension.exists() != value.exists()

• rim:n/a
• rim:N/A

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

• ele-1:All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())
• ext-1:Must have either extensions or value[x], not both
  extension.exists() != value.exists()

• rim:n/a
• rim:N/A

The type of relationship between documents.

If this document appends another document, then the document cannot be fully understood without also accessing the referenced document.

• ele-1:All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())

• rim:n/a
• rim:.outboundRelationship.typeCode
• xds:DocumentEntry Associations type

References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.

• ele-1:All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())
• ref-1:SHALL have a contained resource if a local reference is provided
  reference.startsWith('#').not() or (reference.substring(1).trace('url') in %resource.contained.id.trace('ids'))

• rim:n/a
• rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity)
• rim:.target[classCode="DOC", moodCode="EVN"].id
• xds:DocumentEntry Associations reference

Helps humans to assess whether the document is of interest.

What the document is about, rather than a terse summary of the document. It is commonly the case that records do not have a title and are collectively referred to by the display name of Record code (e.g. a "consultation" or "progress note").

• ele-1:All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())

• rim:n/a
• v2:TXA-25
• rim:.outboundRelationship[typeCode="SUBJ"].target.text
• xds:DocumentEntry.description

Security Labels from the Healthcare Privacy and Security Classification System.

Use of the Health Care Privacy/Security Classification (HCS) system of security-tag use is recommended.

The confidentiality codes can carry multiple vocabulary items. HL7 has developed an understanding of security and privacy tags that might be desirable in a Document Sharing environment, called HL7 Healthcare Privacy and Security Classification System (HCS). The following specification is recommended but not mandated, as the vocabulary bindings are an administrative domain responsibility. The use of this method is up to the policy domain such as the XDS Affinity Domain or other Trust Domain where all parties including sender and recipients are trusted to appropriately tag and enforce. In the HL7 Healthcare Privacy and Security Classification (HCS) there are code systems specific to Confidentiality, Sensitivity, Integrity, and Handling Caveats. Some values would come from a local vocabulary as they are related to workflow roles and special projects.

• ele-1:All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())

• rim:n/a
• v2:CE/CNE/CWE
• rim:CD
• orim:fhir:CodeableConcept rdfs:subClassOf dt:CD
• v2:TXA-18
• rim:.confidentialityCode
• xds:DocumentEntry.confidentialityCode

• ele-1:All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())

• rim:n/a
• rim:document.text

Note that FHIR strings may not exceed 1MB in size

• ele-1:All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())

• rim:n/a

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

• ele-1:All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())
• ext-1:Must have either extensions or value[x], not both
  extension.exists() != value.exists()

• rim:n/a
• rim:N/A

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

• ele-1:All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())
• ext-1:Must have either extensions or value[x], not both
  extension.exists() != value.exists()

• rim:n/a
• rim:N/A

When providing a summary view (for example with Observation.value[x]) Attachment should be represented with a brief display text such as "Attachment".

• ele-1:All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())
• att-1:It the Attachment has data, it SHALL have a contentType
  data.empty() or contentType.exists()

• rim:n/a
• v2:ED/RP
• rim:ED
• v2:TXA-3 for mime type
• rim:document.text
• xds:DocumentEntry.mimeType DocumentEntry.languageCode DocumentEntry.URI DocumentEntry.size DocumentEntry.hash DocumentEntry.title

Document Format Codes.

Note that while IHE mostly issues URNs for format types, not all documents can be identified by a URI.

• ele-1:All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())

• rim:n/a
• v2:CE/CNE/CWE subset one of the sets of component 1-3 or 4-6
• rim:CV
• orim:fhir:Coding rdfs:subClassOf dt:CDCoding
• rim:document.text
• xds:DocumentEntry.formatCode

These values are primarily added to help with searching for interesting/relevant documents.

• ele-1:All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())

• rim:n/a
• rim:outboundRelationship[typeCode="SUBJ"].target[classCode<'ACT']

Note that FHIR strings may not exceed 1MB in size

• ele-1:All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())

• rim:n/a

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

• ele-1:All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())
• ext-1:Must have either extensions or value[x], not both
  extension.exists() != value.exists()

• rim:n/a
• rim:N/A

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

• ele-1:All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())
• ext-1:Must have either extensions or value[x], not both
  extension.exists() != value.exists()

• rim:n/a
• rim:N/A

References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.

• ele-1:All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())
• ref-1:SHALL have a contained resource if a local reference is provided
  reference.startsWith('#').not() or (reference.substring(1).trace('url') in %resource.contained.id.trace('ids'))

• rim:n/a
• rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity)
• rim:unique(highest(./outboundRelationship[typeCode="SUBJ" and isNormalActRelationship()], priorityNumber)/target[moodCode="EVN" and classCode=("ENC", "PCPR") and isNormalAct])
• w5:context

This list of codes represents the main clinical acts being documented.

An event can further specialize the act inherent in the type, such as where it is simply "Procedure Report" and the procedure was a "colonoscopy". If one or more event codes are included, they shall not conflict with the values inherent in the class or type elements as such a conflict would create an ambiguous situation.

• ele-1:All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())

• rim:n/a
• v2:CE/CNE/CWE
• rim:CD
• orim:fhir:CodeableConcept rdfs:subClassOf dt:CD
• rim:.code
• xds:DocumentEntry.eventCodeList

This is not a duration - that's a measure of time (a separate type), but a duration that occurs at a fixed value of time. A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). If duration is required, specify the type as Interval|Duration.

• ele-1:All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())
• per-1:If present, start SHALL have a lower value than end
  start.empty() or end.empty() or (start <= end)

• rim:n/a
• v2:DR
• rim:IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"]
• rim:.effectiveTime
• xds:DocumentEntry.serviceStartTime DocumentEntry.serviceStopTime

XDS Facility Type.

Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination.

• ele-1:All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())

• rim:n/a
• v2:CE/CNE/CWE
• rim:CD
• orim:fhir:CodeableConcept rdfs:subClassOf dt:CD
• rim:.participation[typeCode="LOC"].role[classCode="DSDLOC"].code
• xds:DocumentEntry.healthcareFacilityTypeCode

Care setting type of the document

This is an important piece of metadata that providers often rely upon to quickly sort and/or filter out to find specific content.

The value set for this content has an example binding because it is a value set decided by community policy. Other examples exist for consideration: * HITSP created the table HITSP/C80 Table 2-148 Clinical Specialty Value Set (a value set based upon SNOMED CT which is referenced by Direct (XDR and XDM for Direct Messaging Specification, Version 1), as well as Nationwide Health Information Network (NHIN). Query for Documents, Web Service Interface Specification, V 3.0, 07/27/2011 * ELGA (Austria) (ELGA CDA Implementie-rungsleitfäden Registrierung von CDA Dokumenten für ELGA mit IHE Cross-Enterprise Document Sharing: XDS Metadaten (XDSDocumentEntry), [1.2.40.0.34.7.6.3] * XDS Connect-a-thon practiceSettingCode.

• ele-1:All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())

• rim:n/a
• v2:CE/CNE/CWE
• rim:CD
• orim:fhir:CodeableConcept rdfs:subClassOf dt:CD
• rim:.participation[typeCode="LOC"].role[classCode="DSDLOC"].code
• xds:DocumentEntry.practiceSettingCode

References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.

• ele-1:All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())
• ref-1:SHALL have a contained resource if a local reference is provided
  reference.startsWith('#').not() or (reference.substring(1).trace('url') in %resource.contained.id.trace('ids'))

• rim:n/a
• rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity)
• rim:.participation[typeCode="SBJ"].role[typeCode="PAT"]
• xds:DocumentEntry.sourcePatientInfo DocumentEntry.sourcePatientId

May be identifiers or resources that caused the DocumentReference or referenced Document to be created.

• ele-1:All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())

• rim:n/a
• rim:./outboundRelationship[typeCode="PERT" and isNormalActRelationship()] / target[isNormalAct]
• xds:DocumentEntry.referenceIdList

Note that FHIR strings may not exceed 1MB in size

• ele-1:All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())

• rim:n/a

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

• ele-1:All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())
• ext-1:Must have either extensions or value[x], not both
  extension.exists() != value.exists()

• rim:n/a
• rim:N/A

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

• ele-1:All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())
• ext-1:Must have either extensions or value[x], not both
  extension.exists() != value.exists()

• rim:n/a
• rim:N/A

Order numbers, accession numbers, XDW workflow numbers.

• ele-1:All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())

• rim:n/a
• v2:CX / EI (occasionally, more often EI maps to a resource id or a URL)
• rim:II - see see identifier pattern at http://wiki.hl7.org/index.php?title=Common_Design_Patterns#Identifier_Pattern for relevant discussion. The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT]
• servd:Identifier
• rim:./outboundRelationship[typeCode="PERT" and isNormalActRelationship()] / target[isNormalAct] .id

Note that FHIR strings may not exceed 1MB in size

• ele-1:All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())

• rim:n/a

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

• ele-1:All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())
• ext-1:Must have either extensions or value[x], not both
  extension.exists() != value.exists()

• rim:n/a
• rim:N/A

Identifies the purpose for this identifier, if known .

Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one. Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

• ele-1:All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())

• rim:n/a
• v2:N/A
• rim:Role.code or implied by context

A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.

Allows users to make use of identifiers when the identifier system is not known.

This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage.

Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

• ele-1:All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())

• rim:n/a
• v2:CE/CNE/CWE
• rim:CD
• orim:fhir:CodeableConcept rdfs:subClassOf dt:CD
• v2:CX.5
• rim:Role.code or implied by context

There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

see http://en.wikipedia.org/wiki/Uniform_resource_identifier

• ele-1:All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())

• rim:n/a
• v2:CX.4 / EI-2-4
• rim:II.root or Role.id.root
• servd:./IdentifierType

If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension.

• ele-1:All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())

• rim:n/a
• v2:CX.1 / EI.1
• rim:II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root)
• servd:./Value

This is not a duration - that's a measure of time (a separate type), but a duration that occurs at a fixed value of time. A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). If duration is required, specify the type as Interval|Duration.

• ele-1:All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())
• per-1:If present, start SHALL have a lower value than end
  start.empty() or end.empty() or (start <= end)

• rim:n/a
• v2:DR
• rim:IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"]
• v2:CX.7 + CX.8
• rim:Role.effectiveTime or implied by context
• servd:./StartDate and ./EndDate

The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.

• ele-1:All FHIR elements must have a @value or children
  hasValue() | (children().count() > id.count())
• ref-1:SHALL have a contained resource if a local reference is provided
  reference.startsWith('#').not() or (reference.substring(1).trace('url') in %resource.contained.id.trace('ids'))