NVD FHIR API integrācijas apraksts

Datu pieejas liegšana

Laboratorisko izmeklējumu rezultātu pārskatu datu pieejamības ierobežošanas nodrošināšanai tiek izmantots FHIR R4B bāzes resurss Consent

Lieguma struktūra

Lieguma datu apmaiņai izmantotais profils:

LaboratoryConsentDelegatesPatient (Consent)	I		LaboratoryConsentBase	There are no (further) constraints on this element Element id Consent Short description A healthcare consumer's choices to permit or deny recipients or roles to perform actions for specific purposes and periods of time Definition A record of a healthcare consumer’s choices, which permits or denies identified recipient(s) or recipient role(s) to perform one or more actions within a given policy context, for specific purposes and periods of time. Comments Broadly, there are 3 key areas of consent for patients: Consent around sharing information (aka Privacy Consent Directive - Authorization to Collect, Use, or Disclose information), consent for specific treatment, or kinds of treatment, and general advance care directives. Data type LaboratoryConsentBase Constraints dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources `contained.contained.empty()` dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated `contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()` dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource `contained.where(((id.exists() and ('#'+id in (%resource.descendants().reference \| %resource.descendants().as(canonical) \| %resource.descendants().as(uri) \| %resource.descendants().as(url)))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(uri) = '#').exists()).not()).trace('unmatched', id).empty()` dom-6: A resource should have narrative for robust management text.`div`.exists() dom-5: If a resource is contained in another resource, it SHALL NOT have a security label `contained.meta.security.empty()` ppc-4: IF Scope=adr, there must be a patient `patient.exists() or scope.coding.where(system='something' and code='adr').exists().not()` ppc-5: IF Scope=treatment, there must be a patient `patient.exists() or scope.coding.where(system='something' and code='treatment').exists().not()` ppc-2: IF Scope=privacy, there must be a patient `patient.exists() or scope.coding.where(system='something' and code='patient-privacy').exists().not()` ppc-3: IF Scope=research, there must be a patient `patient.exists() or scope.coding.where(system='something' and code='research').exists().not()` ppc-1: Either a Policy or PolicyRule `policy.exists() or policyRule.exists()` lab-ele-3: The grantor shall be specified, either as Consent.meta.tag element or Consent.performer `meta.tag.where(system='urn:oid:1.3.6.1.4.1.38760.2.23').exists() and meta.tag.where(system='urn:oid:1.3.6.1.4.1.38760.2.1').exists() or performer.reference.substring(0, performer.reference.indexOf('/')) = 'Patient'` Mappings rim: Entity. Role, or Act workflow: Event v2: CON rim: FinancialConsent w5: infrastructure.information
id	Σ	0..1	id	There are no (further) constraints on this element Element id Consent.id Short description Logical id of this artifact Definition The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes. Comments The only time that a resource does not have an id is when it is being submitted to the server using a create operation. Data type id
meta	Σ	0..1	MedicalMeta	There are no (further) constraints on this element Element id Consent.meta Short description Metadata about a resource Definition The metadata about a resource. This is content in the resource that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource. Data type MedicalMeta Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a rim: N/A
id		0..0	id	There are no (further) constraints on this element Element id Consent.meta.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type id Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Consent.meta.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
versionId	Σ	0..1	id	There are no (further) constraints on this element Element id Consent.meta.versionId Short description Version specific identifier Definition The version specific identifier, as it appears in the version portion of the URL. This value changes when the resource is created, updated, or deleted. ©NHS: Value SHALL NOT be provided in CREATE and UPDATE requests. VersionId is being applied by the system and it is only available in READ response. Comments The server assigns this value, and ignores what the client specifies, except in the case that the server is imposing version integrity on updates/deletes. Data type id Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a
lastUpdated	Σ	0..1	instant	There are no (further) constraints on this element Element id Consent.meta.lastUpdated Short description When the resource version last changed Definition When the resource last changed - e.g. when the version changed. ©NHS: Value SHALL NOT be provided in CREATE and UPDATE requests. lastUpdated is being applied by the system and it is only available in READ response. Comments This value is always populated except when the resource is first being created. The server / resource manager sets this value; what a client provides is irrelevant. This is equivalent to the HTTP Last-Modified and SHOULD have the same value on a read interaction. Data type instant Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a
source	Σ	0..1	uri	There are no (further) constraints on this element Element id Consent.meta.source Short description Identifies where the resource comes from Definition A uri that identifies the source system of the resource. This provides a minimal amount of Provenance information that can be used to track or differentiate the source of information in the resource. The source may identify another FHIR server, document, message, database, etc. ©NHS: Value SHALL NOT be provided in CREATE and UPDATE requests. It is only available in READ response when required by business. Comments In the provenance resource, this corresponds to Provenance.entity.what[x]. The exact use of the source (and the implied Provenance.entity.role) is left to implementer discretion. Only one nominated source is allowed; for additional provenance details, a full Provenance resource should be used. This element can be used to indicate where the current master source of a resource that has a canonical URL if the resource is no longer hosted at the canonical URL. Data type uri Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a
profile	Σ	1..1	canonical(StructureDefinition)	There are no (further) constraints on this element Element id Consent.meta.profile Short description Profiles this resource claims to conform to Definition A list of profiles (references to StructureDefinition resources) that this resource claims to conform to. The URL is a reference to StructureDefinition.url. ©NHS: Profile SHALL always be provided. Comments It is up to the server and/or other infrastructure of policy to determine whether/how these claims are verified and/or updated over time. The list of profile URLs is a set. Data type canonical(StructureDefinition) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a
security	Σ	0..0	CodingBinding	There are no (further) constraints on this element Element id Consent.meta.security Short description Security Labels applied to this resource Definition Security labels applied to this resource. These tags connect specific resources to the overall security policy and infrastructure. Comments The security labels can be updated without changing the stated version of the resource. The list of security labels is a set. Uniqueness is based the system/code, and version and display are ignored. Data type Coding Binding All Security Labels (extensible) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim: CV orim: fhir:Coding rdfs:subClassOf dt:CDCoding
tag	Σ	1..*	Coding	There are no (further) constraints on this element Element id Consent.meta.tag Short description Tags applied to this resource Definition Tags applied to this resource. Tags are intended to be used to identify and relate resources to process and workflow, and applications are not required to consider the tags when interpreting the meaning of a resource. ©NHS: Tags are required to identify who is responsible for the information in the resource, i.e. who provided/created it. Comments The tags can be updated without changing the stated version of the resource. The list of tags is a set. Uniqueness is based the system/code, and version and display are ignored. Data type Coding Sliced: Unordered, Closed, by system(Value) Binding CommonTags (example) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim: CV orim: fhir:Coding rdfs:subClassOf dt:CDCoding
authorMedicalInstitution	Σ	0..1	Coding	There are no (further) constraints on this element Element id Consent.meta.tag:authorMedicalInstitution Short description Tags applied to this resource Definition Tags applied to this resource. Tags are intended to be used to identify and relate resources to process and workflow, and applications are not required to consider the tags when interpreting the meaning of a resource. ©NHS: Authorized Medical Institution making the request. Values SHALL be provided in CREATE and UPDATE requests of Medical Institutions. When provided SHALL be validated against JWT. Comments The tags can be updated without changing the stated version of the resource. The list of tags is a set. Uniqueness is based the system/code, and version and display are ignored. Data type Coding Binding CommonTags (example) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim: CV orim: fhir:Coding rdfs:subClassOf dt:CDCoding
id		1..1	idFixed Value	There are no (further) constraints on this element Element id Consent.meta.tag:authorMedicalInstitution.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type id Fixed value authorMedicalInstitution Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Consent.meta.tag:authorMedicalInstitution.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
system	Σ	1..1	uriFixed Value	There are no (further) constraints on this element Element id Consent.meta.tag:authorMedicalInstitution.system Short description Identity of the terminology system Definition The identification of the code system that defines the meaning of the symbol in the code. Requirements Need to be unambiguous about the source of the definition of the symbol. Comments The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously. Data type uri Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Fixed value urn:oid:1.3.6.1.4.1.38760.2.23 Mappings rim: n/a v2: CE.3 rim:* ./codeSystem orim: fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem
version	Σ	0..0	string	There are no (further) constraints on this element Element id Consent.meta.tag:authorMedicalInstitution.version Short description Version of the system - if relevant Definition The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged. Comments Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date. Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE.7 rim:* ./codeSystemVersion orim: fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion
code	Σ I	1..1	code	There are no (further) constraints on this element Element id Consent.meta.tag:authorMedicalInstitution.code Short description Symbol in syntax defined by the system Definition A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination). ©NHS: Medical Institution code. ConceptCode from VVIS 1.3.6.1.4.1.38760.2.23 (Organization.identifier:medicalInstitutionIdentifier.value) is expected. Code SHALL be identical to "VIAuthorityCode" in JWT. Requirements Need to refer to a particular code in the system. Comments Note that FHIR strings SHALL NOT exceed 1MB in size ©NHS: Maximum 20 symbols are expected. Data type code Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` med-code-1: Code value shall be not longer than 20 characters `matches('^.{1,20}$')` Mappings rim: n/a v2: CE.1 rim:* ./code orim: fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code
display	Σ	1..1	string	There are no (further) constraints on this element Element id Consent.meta.tag:authorMedicalInstitution.display Short description Representation defined by the system Definition A representation of the meaning of the code in the system, following the rules of the system. ©NHS: Medical Institution name. ConceptCode displayText from VVIS 1.3.6.1.4.1.38760.2.23 (Organization.name) is expected. DisplayText SHALL be identical to "AuthorityFullName" in JWT. Requirements Need to be able to carry a human-readable meaning of the code for readers that do not know the system. Comments Note that FHIR strings SHALL NOT exceed 1MB in size ©NHS: Maximum 300 symbols are expected. Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Maximum string length 300 Mappings rim: n/a v2: CE.2 - but note this is not well followed rim:* CV.displayName orim: fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName
userSelected	Σ	0..0	boolean	There are no (further) constraints on this element Element id Consent.meta.tag:authorMedicalInstitution.userSelected Short description If this coding was chosen directly by the user Definition Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays). Requirements This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing. Comments Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely. Data type boolean Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: Sometimes implied by being first rim: CD.codingRationale orim: fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]
entererMedicalPerson	Σ	0..1	Coding	There are no (further) constraints on this element Element id Consent.meta.tag:entererMedicalPerson Short description Tags applied to this resource Definition Tags applied to this resource. Tags are intended to be used to identify and relate resources to process and workflow, and applications are not required to consider the tags when interpreting the meaning of a resource. ©NHS: Authorized Medical Person making the request. Values SHALL be provided in CREATE and UPDATE requests of Medical Personal. When provided SHALL be validated against JWT. Comments The tags can be updated without changing the stated version of the resource. The list of tags is a set. Uniqueness is based the system/code, and version and display are ignored. Data type Coding Binding CommonTags (example) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim: CV orim: fhir:Coding rdfs:subClassOf dt:CDCoding
id		1..1	idFixed Value	There are no (further) constraints on this element Element id Consent.meta.tag:entererMedicalPerson.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type id Fixed value entererMedicalPerson Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Consent.meta.tag:entererMedicalPerson.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
system	Σ	1..1	uriFixed Value	There are no (further) constraints on this element Element id Consent.meta.tag:entererMedicalPerson.system Short description Identity of the terminology system Definition The identification of the code system that defines the meaning of the symbol in the code. Requirements Need to be unambiguous about the source of the definition of the symbol. Comments The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously. Data type uri Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Fixed value urn:oid:1.3.6.1.4.1.38760.2.1 Mappings rim: n/a v2: CE.3 rim:* ./codeSystem orim: fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem
version	Σ	0..0	string	There are no (further) constraints on this element Element id Consent.meta.tag:entererMedicalPerson.version Short description Version of the system - if relevant Definition The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged. Comments Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date. Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE.7 rim:* ./codeSystemVersion orim: fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion
code	Σ I	1..1	code	There are no (further) constraints on this element Element id Consent.meta.tag:entererMedicalPerson.code Short description Symbol in syntax defined by the system Definition A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination). ©NHS: Medical Person code. Property id=4 from VVIS 1.3.6.1.4.1.38760.2.1 (Practitioner.identifier:HealthInspectorateIdentifier.value where system=1.3.6.1.4.1.38760.3.1.4) is expected. When provided SHALL be validated aigainst JWT VIMedicalCode. Requirements Need to refer to a particular code in the system. Comments Note that FHIR strings SHALL NOT exceed 1MB in size ©NHS: Maximum 11 symbols are expected. Data type code Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` med-code-2: Code value shall be not longer than 11 characters `matches('^.{1,11}$')` Mappings rim: n/a v2: CE.1 rim:* ./code orim: fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code
display	Σ	1..1	string	There are no (further) constraints on this element Element id Consent.meta.tag:entererMedicalPerson.display Short description Representation defined by the system Definition A representation of the meaning of the code in the system, following the rules of the system. ©NHS: Medical Person name. ConceptCode displayText from VVIS 1.3.6.1.4.1.38760.2.1 (Practitioner.name.text) is expected. Value SHALL be identical to displayText from VVIS 1.3.6.1.4.1.38760.2.1 (Practitioner.name.text) at the request time. Requirements Need to be able to carry a human-readable meaning of the code for readers that do not know the system. Comments Note that FHIR strings SHALL NOT exceed 1MB in size ©NHS: Maximum 200 symbols are expected. Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Maximum string length 200 Mappings rim: n/a v2: CE.2 - but note this is not well followed rim:* CV.displayName orim: fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName
userSelected	Σ	0..0	boolean	There are no (further) constraints on this element Element id Consent.meta.tag:entererMedicalPerson.userSelected Short description If this coding was chosen directly by the user Definition Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays). Requirements This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing. Comments Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely. Data type boolean Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: Sometimes implied by being first rim: CD.codingRationale orim: fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]
entererPersonId	Σ	0..1	Coding	There are no (further) constraints on this element Element id Consent.meta.tag:entererPersonId Short description Tags applied to this resource Definition Tags applied to this resource. Tags are intended to be used to identify and relate resources to process and workflow, and applications are not required to consider the tags when interpreting the meaning of a resource. ©NHS: Authorized Person making the request. Values SHOULD be provided in CREATE and UPDATE requests of any human actor not registered in Health Inspection. When provided SHALL be validated against JWT. Comments The tags can be updated without changing the stated version of the resource. The list of tags is a set. Uniqueness is based the system/code, and version and display are ignored. Data type Coding Binding CommonTags (example) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim: CV orim: fhir:Coding rdfs:subClassOf dt:CDCoding
id		1..1	idFixed Value	There are no (further) constraints on this element Element id Consent.meta.tag:entererPersonId.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type id Fixed value entererPersonId Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Consent.meta.tag:entererPersonId.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
system	Σ	1..1	uriFixed Value	There are no (further) constraints on this element Element id Consent.meta.tag:entererPersonId.system Short description Identity of the terminology system Definition The identification of the code system that defines the meaning of the symbol in the code. Requirements Need to be unambiguous about the source of the definition of the symbol. Comments The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously. Data type uri Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Fixed value urn:oid:1.3.6.1.4.1.38760.3.1.1 Mappings rim: n/a v2: CE.3 rim:* ./codeSystem orim: fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem
version	Σ	0..0	string	There are no (further) constraints on this element Element id Consent.meta.tag:entererPersonId.version Short description Version of the system - if relevant Definition The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged. Comments Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date. Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE.7 rim:* ./codeSystemVersion orim: fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion
code	Σ I	1..1	code	There are no (further) constraints on this element Element id Consent.meta.tag:entererPersonId.code Short description Symbol in syntax defined by the system Definition ©NHS: Health professional or patient personal identity number is expected. ©NHS: Personal identity number is expected. When provided SHALL be validated against JWT ppid. Requirements Need to refer to a particular code in the system. Comments Note that FHIR strings SHALL NOT exceed 1MB in size ©NHS: Maximum 11 symbols are expected. Data type code Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` med-code-3: Code value shall be not longer than 11 characters `matches('^.{1,11}$')` Mappings rim: n/a v2: CE.1 rim:* ./code orim: fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code
display	Σ	1..1	string	There are no (further) constraints on this element Element id Consent.meta.tag:entererPersonId.display Short description Representation defined by the system Definition A representation of the meaning of the code in the system, following the rules of the system. ©NHS: Person given and family name are expected. When provided SHALL be validated against JWT "given_name" and family_name". Requirements Need to be able to carry a human-readable meaning of the code for readers that do not know the system. Comments Note that FHIR strings SHALL NOT exceed 1MB in size ©NHS: Maximum 200 symbols are expected. Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Maximum string length 200 Mappings rim: n/a v2: CE.2 - but note this is not well followed rim:* CV.displayName orim: fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName
userSelected	Σ	0..0	boolean	There are no (further) constraints on this element Element id Consent.meta.tag:entererPersonId.userSelected Short description If this coding was chosen directly by the user Definition Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays). Requirements This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing. Comments Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely. Data type boolean Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: Sometimes implied by being first rim: CD.codingRationale orim: fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]
entererSystem	Σ	1..1	Coding	There are no (further) constraints on this element Element id Consent.meta.tag:entererSystem Short description Tags applied to this resource Definition Tags applied to this resource. Tags are intended to be used to identify and relate resources to process and workflow, and applications are not required to consider the tags when interpreting the meaning of a resource. ©NHS: HIS, LIS or other information system making the request. Values SHALL be provided in CREATE and UPDATE requests. Comments The tags can be updated without changing the stated version of the resource. The list of tags is a set. Uniqueness is based the system/code, and version and display are ignored. Data type Coding Binding CommonTags (example) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim: CV orim: fhir:Coding rdfs:subClassOf dt:CDCoding
id		1..1	idFixed Value	There are no (further) constraints on this element Element id Consent.meta.tag:entererSystem.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type id Fixed value entererSystem Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Consent.meta.tag:entererSystem.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
system	Σ	1..1	uriFixed Value	There are no (further) constraints on this element Element id Consent.meta.tag:entererSystem.system Short description Identity of the terminology system Definition The identification of the code system that defines the meaning of the symbol in the code. Requirements Need to be unambiguous about the source of the definition of the symbol. Comments The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously. Data type uri Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Fixed value https://vvis.gov.lv/fhir/CodeSystem/1.3.6.1.4.1.38760.2.3 Mappings rim: n/a v2: CE.3 rim:* ./codeSystem orim: fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem
version	Σ	0..0	string	There are no (further) constraints on this element Element id Consent.meta.tag:entererSystem.version Short description Version of the system - if relevant Definition The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged. Comments Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date. Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE.7 rim:* ./codeSystemVersion orim: fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion
code	Σ I	1..1	code	There are no (further) constraints on this element Element id Consent.meta.tag:entererSystem.code Short description Symbol in syntax defined by the system Definition A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination). ©NHS: Information system code, NOT system developer code. Information system code from VVIS 1.3.6.1.4.1.38760.2.3 is expected. Code SHALL be identical to classifier code on the request dateTime. Requirements Need to refer to a particular code in the system. Comments Note that FHIR strings SHALL NOT exceed 1MB in size ©NHS: Maximum 64 symbols are expected. Data type code Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` med-code-4: Code value shall be not longer than 64 characters `matches('^.{1,64}$')` Mappings rim: n/a v2: CE.1 rim:* ./code orim: fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code
display	Σ	1..1	string	There are no (further) constraints on this element Element id Consent.meta.tag:entererSystem.display Short description Representation defined by the system Definition A representation of the meaning of the code in the system, following the rules of the system. ©NHS: Information system name, NOT system developer name. Information system code displayText from VVIS 1.3.6.1.4.1.38760.2.3 is expected. DisplayText SHALL be identical to classifier code displayText on the request dateTime. Requirements Need to be able to carry a human-readable meaning of the code for readers that do not know the system. Comments Note that FHIR strings SHALL NOT exceed 1MB in size ©NHS: Maximum 300 symbols are expected. Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Maximum string length 300 Mappings rim: n/a v2: CE.2 - but note this is not well followed rim:* CV.displayName orim: fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName
userSelected	Σ	0..0	boolean	There are no (further) constraints on this element Element id Consent.meta.tag:entererSystem.userSelected Short description If this coding was chosen directly by the user Definition Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays). Requirements This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing. Comments Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely. Data type boolean Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: Sometimes implied by being first rim: CD.codingRationale orim: fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]
entererMedicalPersonRole	Σ	0..1	Coding	There are no (further) constraints on this element Element id Consent.meta.tag:entererMedicalPersonRole Short description Tags applied to this resource Definition Tags applied to this resource. Tags are intended to be used to identify and relate resources to process and workflow, and applications are not required to consider the tags when interpreting the meaning of a resource. ©NHS: Authorized Medical Person Role making the request. Values SHALL be provided in CREATE and UPDATE requests of Medical Institutions when Medical Person Role is used for authorization. When provided SHALL be validated against JWT. Comments The tags can be updated without changing the stated version of the resource. The list of tags is a set. Uniqueness is based the system/code, and version and display are ignored. Data type Coding Binding CommonTags (example) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim: CV orim: fhir:Coding rdfs:subClassOf dt:CDCoding
id		1..1	idFixed Value	There are no (further) constraints on this element Element id Consent.meta.tag:entererMedicalPersonRole.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type id Fixed value entererMedicalPersonRole Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Consent.meta.tag:entererMedicalPersonRole.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
system	Σ	1..1	uriFixed Value	There are no (further) constraints on this element Element id Consent.meta.tag:entererMedicalPersonRole.system Short description Identity of the terminology system Definition The identification of the code system that defines the meaning of the symbol in the code. Requirements Need to be unambiguous about the source of the definition of the symbol. Comments The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously. Data type uri Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Fixed value urn:oid:1.3.6.1.4.1.38760.2.37 Mappings rim: n/a v2: CE.3 rim:* ./codeSystem orim: fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem
version	Σ	0..0	string	There are no (further) constraints on this element Element id Consent.meta.tag:entererMedicalPersonRole.version Short description Version of the system - if relevant Definition The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged. Comments Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date. Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE.7 rim:* ./codeSystemVersion orim: fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion
code	Σ I	1..1	code	There are no (further) constraints on this element Element id Consent.meta.tag:entererMedicalPersonRole.code Short description Symbol in syntax defined by the system Definition A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination). ©NHS: Medical Person Role code. Code from VVIS 1.3.6.1.4.1.38760.2.37 (PractitionerRole.identifier.value) is expected. Code SHALL be identical to JWT sub: "...-1.3.6.1.4.1.38760.2.37:PractitionerRoleCode" when medical person's workplace is used for authorization. Requirements Need to refer to a particular code in the system. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type code Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` med-code-5: Code value shall be not longer than 20 characters `matches('^.{1,20}$')` Mappings rim: n/a v2: CE.1 rim:* ./code orim: fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code
display	Σ	0..0	string	There are no (further) constraints on this element Element id Consent.meta.tag:entererMedicalPersonRole.display Short description Representation defined by the system Definition A representation of the meaning of the code in the system, following the rules of the system. Requirements Need to be able to carry a human-readable meaning of the code for readers that do not know the system. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE.2 - but note this is not well followed rim:* CV.displayName orim: fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName
userSelected	Σ	0..0	boolean	There are no (further) constraints on this element Element id Consent.meta.tag:entererMedicalPersonRole.userSelected Short description If this coding was chosen directly by the user Definition Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays). Requirements This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing. Comments Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely. Data type boolean Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: Sometimes implied by being first rim: CD.codingRationale orim: fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]
implicitRules	Σ ?!	0..1	uri	There are no (further) constraints on this element Element id Consent.implicitRules Short description A set of rules under which this content was created Definition A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc. Comments Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc. Data type uri Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a
language		0..1	codeBinding	There are no (further) constraints on this element Element id Consent.language Short description Language of the resource content Definition The base language in which the resource is written. Comments Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute). Data type code Binding IETF language tag CommonLanguages (preferred) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a
text		0..1	Narrative	There are no (further) constraints on this element Element id Consent.text Short description Text summary of the resource, for human interpretation Alternate names narrative, html, xhtml, display Definition A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety. Comments Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later. Data type Narrative Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a rim: N/A rim: Act.text?
contained	I	0..*	Resource	There are no (further) constraints on this element Element id Consent.contained Short description Contained, inline Resources Alternate names inline resources, anonymous resources, contained resources Definition These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope. Comments This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels. Data type Resource Constraints dom-r4b: Containing new R4B resources within R4 resources may cause interoperability issues if instances are shared with R4 systems ($this is Citation or $this is Evidence or $this is EvidenceReport or $this is EvidenceVariable or $this is MedicinalProductDefinition or $this is PackagedProductDefinition or $this is AdministrableProductDefinition or $this is Ingredient or $this is ClinicalUseDefinition or $this is RegulatedAuthorization or $this is SubstanceDefinition or $this is SubscriptionStatus or $this is SubscriptionTopic) implies (%resource is Citation or %resource is Evidence or %resource is EvidenceReport or %resource is EvidenceVariable or %resource is MedicinalProductDefinition or %resource is PackagedProductDefinition or %resource is AdministrableProductDefinition or %resource is Ingredient or %resource is ClinicalUseDefinition or %resource is RegulatedAuthorization or %resource is SubstanceDefinition or %resource is SubscriptionStatus or %resource is SubscriptionTopic) Mappings rim: Entity. Role, or Act rim: N/A
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Consent.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	?! I	0..*	Extension	There are no (further) constraints on this element Element id Consent.modifierExtension Short description Extensions that cannot be ignored Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
identifier	Σ	0..0	Identifier	There are no (further) constraints on this element Element id Consent.identifier Short description Identifier for this record (external references) Definition Unique identifier for this copy of the Consent Statement. Comments This identifier identifies this copy of the consent. Where this identifier is also used elsewhere as the identifier for a consent record (e.g. a CDA consent document) then the consent details are expected to be the same. Data type Identifier Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CX / EI (occasionally, more often EI maps to a resource id or a URL) rim: II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd: Identifier workflow: Event.identifier w5: FiveWs.identifier rim: .id
status	Σ ?! I	1..1	codeBinding	There are no (further) constraints on this element Element id Consent.status Short description draft \| proposed \| active \| rejected \| inactive \| entered-in-error Definition Indicates the current state of this consent. Requirements The Consent Directive that is pointed to might be in various lifecycle states, e.g., a revoked Consent Directive. Comments This element is labeled as a modifier because the status contains the codes rejected and entered-in-error that mark the Consent as not currently valid. Data type code Binding Indicates the state of the consent. ConsentState (required) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` lab-ele-1: Only values 'active', 'inactive' are allowed for this type of Consent. `$this in ('active' \| 'inactive')` Mappings rim: n/a workflow: Event.status w5: FiveWs.status v2: HL7 Table 0498 - Consent Status rim: .statusCode
scope	Σ ?!	1..1	CodeableConceptBinding	There are no (further) constraints on this element Element id Consent.scope Short description Which of the four areas this resource covers (extensible) Definition A selector of the type of consent being presented: ADR, Privacy, Treatment, Research. This list is now extensible. Comments Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination. Data type CodeableConcept Binding The four anticipated uses for the Consent Resource. ConsentScopeCodes (required) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD
id		0..1	id	There are no (further) constraints on this element Element id Consent.scope.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type id Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Consent.scope.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
coding	Σ	1..1	Coding	There are no (further) constraints on this element Element id Consent.scope.coding Short description Code defined by a terminology system Definition A reference to a code defined by a terminology system. Requirements Allows for alternative encodings within a code system, and translations to other code systems. Comments Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. Data type Coding Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim: CV orim: fhir:Coding rdfs:subClassOf dt:CDCoding v2: CE.1-8, CE.10-22 rim: union(., ./translation) orim: fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
id		0..1	id	There are no (further) constraints on this element Element id Consent.scope.coding.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type id Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Consent.scope.coding.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
system	Σ	0..0	uri	There are no (further) constraints on this element Element id Consent.scope.coding.system Short description Identity of the terminology system Definition The identification of the code system that defines the meaning of the symbol in the code. Requirements Need to be unambiguous about the source of the definition of the symbol. Comments The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously. Data type uri Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE.3 rim:* ./codeSystem orim: fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem
version	Σ	0..0	string	There are no (further) constraints on this element Element id Consent.scope.coding.version Short description Version of the system - if relevant Definition The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged. Comments Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date. Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE.7 rim:* ./codeSystemVersion orim: fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion
code	Σ	0..1	codeFixed Value	There are no (further) constraints on this element Element id Consent.scope.coding.code Short description Symbol in syntax defined by the system Definition A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination). Requirements Need to refer to a particular code in the system. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type code Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Fixed value patient-privacy Mappings rim: n/a v2: CE.1 rim:* ./code orim: fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code
display	Σ	0..0	string	There are no (further) constraints on this element Element id Consent.scope.coding.display Short description Representation defined by the system Definition A representation of the meaning of the code in the system, following the rules of the system. Requirements Need to be able to carry a human-readable meaning of the code for readers that do not know the system. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE.2 - but note this is not well followed rim:* CV.displayName orim: fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName
userSelected	Σ	0..0	boolean	There are no (further) constraints on this element Element id Consent.scope.coding.userSelected Short description If this coding was chosen directly by the user Definition Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays). Requirements This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing. Comments Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely. Data type boolean Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: Sometimes implied by being first rim: CD.codingRationale orim: fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]
text	Σ	0..0	string	There are no (further) constraints on this element Element id Consent.scope.text Short description Plain text representation of the concept Definition A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user. Requirements The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source. Comments Very often the text is the same as a displayName of one of the codings. Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE.9. But note many systems use CE.2 for this rim: ./originalText[mediaType/code="text/plain"]/data orim: fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText
category	Σ	1..1	CodeableConceptBinding	There are no (further) constraints on this element Element id Consent.category Short description Classification of the consent statement - for indexing/retrieval Definition A classification of the type of consents found in the statement. This element supports indexing and retrieval of consent statements. Comments Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination. Data type CodeableConcept Binding A classification of the type of consents found in a consent statement. ConsentCategoryCodes (extensible) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD workflow: Event.code w5: FiveWs.class v2: HL7 Table 0497 - Consent Type rim: CNTRCT
id		0..1	id	There are no (further) constraints on this element Element id Consent.category.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type id Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Consent.category.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
coding	Σ	1..1	Coding	There are no (further) constraints on this element Element id Consent.category.coding Short description Code defined by a terminology system Definition A reference to a code defined by a terminology system. Requirements Allows for alternative encodings within a code system, and translations to other code systems. Comments Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. Data type Coding Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim: CV orim: fhir:Coding rdfs:subClassOf dt:CDCoding v2: CE.1-8, CE.10-22 rim: union(., ./translation) orim: fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
id		0..1	id	There are no (further) constraints on this element Element id Consent.category.coding.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type id Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Consent.category.coding.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
system	Σ	0..0	uri	There are no (further) constraints on this element Element id Consent.category.coding.system Short description Identity of the terminology system Definition The identification of the code system that defines the meaning of the symbol in the code. Requirements Need to be unambiguous about the source of the definition of the symbol. Comments The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously. Data type uri Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE.3 rim:* ./codeSystem orim: fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem
version	Σ	0..0	string	There are no (further) constraints on this element Element id Consent.category.coding.version Short description Version of the system - if relevant Definition The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged. Comments Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date. Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE.7 rim:* ./codeSystemVersion orim: fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion
code	Σ	0..1	codeFixed Value	There are no (further) constraints on this element Element id Consent.category.coding.code Short description Symbol in syntax defined by the system Definition A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination). Requirements Need to refer to a particular code in the system. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type code Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Fixed value INFA Mappings rim: n/a v2: CE.1 rim:* ./code orim: fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code
display	Σ	0..0	string	There are no (further) constraints on this element Element id Consent.category.coding.display Short description Representation defined by the system Definition A representation of the meaning of the code in the system, following the rules of the system. Requirements Need to be able to carry a human-readable meaning of the code for readers that do not know the system. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE.2 - but note this is not well followed rim:* CV.displayName orim: fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName
userSelected	Σ	0..0	boolean	There are no (further) constraints on this element Element id Consent.category.coding.userSelected Short description If this coding was chosen directly by the user Definition Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays). Requirements This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing. Comments Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely. Data type boolean Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: Sometimes implied by being first rim: CD.codingRationale orim: fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]
text	Σ	0..0	string	There are no (further) constraints on this element Element id Consent.category.text Short description Plain text representation of the concept Definition A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user. Requirements The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source. Comments Very often the text is the same as a displayName of one of the codings. Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE.9. But note many systems use CE.2 for this rim: ./originalText[mediaType/code="text/plain"]/data orim: fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText
patient	Σ I	0..1	Reference(Patient)	There are no (further) constraints on this element Element id Consent.patient Short description Who the consent applies to Definition The patient/healthcare consumer to whom this consent applies. Comments Commonly, the patient the consent pertains to is the author, but for young and old people, it may be some other person. Data type Reference(Patient) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')) or (reference='#' and %rootResource!=%resource)` Mappings rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity) workflow: Event.subject w5: FiveWs.subject[x] rim: Role w5: FiveWs.subject
dateTime	Σ	0..1	dateTime	There are no (further) constraints on this element Element id Consent.dateTime Short description When this Consent was created or indexed Definition When this Consent was issued / created / indexed. Comments This is not the time of the original consent, but the time that this statement was made or derived. Data type dateTime Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a workflow: Event.occurrence[x] w5: FiveWs.recorded v2: Field 13/ Consent Decision Date rim: FinancialConsent effectiveTime
performer	Σ I	0..1	Reference(Organization \| Patient \| Practitioner \| RelatedPerson \| PractitionerRole)	There are no (further) constraints on this element Element id Consent.performer Short description Who is agreeing to the policy and rules Alternate names consentor Definition Either the Grantor, which is the entity responsible for granting the rights listed in a Consent Directive or the Grantee, which is the entity responsible for complying with the Consent Directive, including any obligations or limitations on authorizations and enforcement of prohibitions. Comments Commonly, the patient the consent pertains to is the consentor, but particularly for young and old people, it may be some other person - e.g. a legal guardian. Data type Reference(Organization \| Patient \| Practitioner \| RelatedPerson \| PractitionerRole) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')) or (reference='#' and %rootResource!=%resource)` lab-ele-reftype: The value of type is not equal to the resource type in the reference `type.exists().not() or (reference.substring(0, reference.indexOf('/')) = type)` Mappings rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity) workflow: Event.performer w5: FiveWs.actor v2: Field 24/ ConsenterID
id		0..1	id	There are no (further) constraints on this element Element id Consent.performer.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type id Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Consent.performer.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
reference	Σ I	1..1	string	There are no (further) constraints on this element Element id Consent.performer.reference Short description Literal reference, Relative, internal or absolute URL Definition A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources. Comments Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server. Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a rim: N/A
type	Σ	1..1	uriBinding	There are no (further) constraints on this element Element id Consent.performer.type Short description Type the reference refers to (e.g. "Patient") Definition The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent. The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources). Comments This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified. Data type uri Binding ResourceType (extensible) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a rim: N/A
identifier	Σ	0..1	Identifier	There are no (further) constraints on this element Element id Consent.performer.identifier Short description Logical reference, when literal reference is not known Definition An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference. Comments When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it. Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation\|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any). Data type Identifier Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CX / EI (occasionally, more often EI maps to a resource id or a URL) rim: II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd: Identifier rim: .identifier
display	Σ	0..1	string	There are no (further) constraints on this element Element id Consent.performer.display Short description Text alternative for the resource Definition Plain text narrative that identifies the resource in addition to the resource reference. Comments This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it. Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a rim: N/A
organization	Σ I	0..0	Reference(Organization)	There are no (further) constraints on this element Element id Consent.organization Short description Custodian of the consent Alternate names custodian Definition The organization that manages the consent, and the framework within which it is executed. Comments References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository. Data type Reference(Organization) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')) or (reference='#' and %rootResource!=%resource)` Mappings rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity) workflow: Event.performer w5: FiveWs.witness
source[x]	Σ	0..0		There are no (further) constraints on this element Element id Consent.source[x] Short description Source from which this consent is taken Definition The source on which this consent statement is based. The source might be a scanned original paper form, or a reference to a consent that links back to such a source, a reference to a document repository (e.g. XDS) that stores the original consent document. Comments The source can be contained inline (Attachment), referenced directly (Consent), referenced in a consent repository (DocumentReference), or simply by an identifier (Identifier), e.g. a CDA document id. Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: Field 19 Informational Material Supplied Indicator
policy		0..0	BackboneElement	There are no (further) constraints on this element Element id Consent.policy Short description Policies covered by this consent Definition The references to the policies that are included in this consent scope. Policies may be organizational, but are often defined jurisdictionally, or in law. Data type BackboneElement Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a
policyRule	Σ I	1..1	CodeableConceptBinding	There are no (further) constraints on this element Element id Consent.policyRule Short description Regulation that this consents to Definition A reference to the specific base computable regulation or policy. Requirements Might be a unique identifier of a policy set in XACML, or other rules engine. Comments If the policyRule is absent, computable consent would need to be constructed from the elements of the Consent resource. Data type CodeableConcept Binding Regulatory policy examples. http://terminology.hl7.org/ValueSet/v3-ActConsentDirective (extensible) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD
id		0..1	id	There are no (further) constraints on this element Element id Consent.policyRule.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type id Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Consent.policyRule.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
coding	Σ	1..1	Coding	There are no (further) constraints on this element Element id Consent.policyRule.coding Short description Code defined by a terminology system Definition A reference to a code defined by a terminology system. Requirements Allows for alternative encodings within a code system, and translations to other code systems. Comments Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. Data type Coding Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim: CV orim: fhir:Coding rdfs:subClassOf dt:CDCoding v2: CE.1-8, CE.10-22 rim: union(., ./translation) orim: fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
id		0..1	id	There are no (further) constraints on this element Element id Consent.policyRule.coding.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type id Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Consent.policyRule.coding.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
system	Σ	0..0	uri	There are no (further) constraints on this element Element id Consent.policyRule.coding.system Short description Identity of the terminology system Definition The identification of the code system that defines the meaning of the symbol in the code. Requirements Need to be unambiguous about the source of the definition of the symbol. Comments The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously. Data type uri Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE.3 rim:* ./codeSystem orim: fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem
version	Σ	0..0	string	There are no (further) constraints on this element Element id Consent.policyRule.coding.version Short description Version of the system - if relevant Definition The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged. Comments Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date. Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE.7 rim:* ./codeSystemVersion orim: fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion
code	Σ I	0..1	codeFixed Value	Element id Consent.policyRule.coding.code Short description Symbol in syntax defined by the system Definition A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination). Requirements Need to refer to a particular code in the system. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type code Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` lab-ele-2: policyRule for this type of Consent can be only OPTOUT or OPTOUTE `$this in ('OPTOUT' \| 'OPTOUTE')` Fixed value OPTOUT Mappings rim: n/a v2: CE.1 rim:* ./code orim: fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code
display	Σ	0..0	string	There are no (further) constraints on this element Element id Consent.policyRule.coding.display Short description Representation defined by the system Definition A representation of the meaning of the code in the system, following the rules of the system. Requirements Need to be able to carry a human-readable meaning of the code for readers that do not know the system. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE.2 - but note this is not well followed rim:* CV.displayName orim: fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName
userSelected	Σ	0..0	boolean	There are no (further) constraints on this element Element id Consent.policyRule.coding.userSelected Short description If this coding was chosen directly by the user Definition Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays). Requirements This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing. Comments Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely. Data type boolean Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: Sometimes implied by being first rim: CD.codingRationale orim: fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]
text	Σ	0..0	string	There are no (further) constraints on this element Element id Consent.policyRule.text Short description Plain text representation of the concept Definition A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user. Requirements The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source. Comments Very often the text is the same as a displayName of one of the codings. Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE.9. But note many systems use CE.2 for this rim: ./originalText[mediaType/code="text/plain"]/data orim: fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText
verification	Σ	0..0	BackboneElement	There are no (further) constraints on this element Element id Consent.verification Short description Consent Verified by patient or family Definition Whether a treatment instruction (e.g. artificial respiration yes or no) was verified with the patient, his/her family or another authorized person. Data type BackboneElement Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a
provision	Σ	1..1	BackboneElement	There are no (further) constraints on this element Element id Consent.provision Short description Constraints to the base Consent.policyRule Definition An exception to the base policy of this consent. An exception can be an addition or removal of access permissions. Data type BackboneElement Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a
id		0..1	id	There are no (further) constraints on this element Element id Consent.provision.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type id Mappings rim: n/a
extension	I	1..1	Extension	Element id Consent.provision.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Closed, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
restrictPatient	I	1..1	Extension(boolean)	Element id Consent.provision.extension:restrictPatient Short description Optional Extensions Element Alternate names extensions, user content Definition Optional Extension Element - found in all resources. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension(boolean) Extension URL https://lab.vvis.gov.lv/fhir/StructureDefinition/Extension/RestrictPatient Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id Consent.provision.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
type	Σ	0..0	codeBinding	There are no (further) constraints on this element Element id Consent.provision.type Short description deny \| permit Definition Action to take - permit or deny - when the rule conditions are met. Not permitted in root rule, required in all nested rules. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type code Binding How a rule statement is applied, such as adding additional consent or removing consent. ConsentProvisionType (required) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a
period	Σ I	0..0	Period	There are no (further) constraints on this element Element id Consent.provision.period Short description Timeframe for this rule Definition The timeframe in this rule is valid. Comments A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration. Data type Period Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` per-1: If present, start SHALL have a lower value than end `start.hasValue().not() or end.hasValue().not() or (start <= end)` Mappings rim: n/a v2: DR rim: IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"]
actor		0..0	BackboneElement	There are no (further) constraints on this element Element id Consent.provision.actor Short description Who\|what controlled by this rule (or group, by role) Definition Who or what is controlled by this rule. Use group to identify a set of actors by some property they share (e.g. 'admitting officers'). Meaning when missing There is no specific actor associated with the exception Data type BackboneElement Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a
action	Σ	0..0	CodeableConcept	There are no (further) constraints on this element Element id Consent.provision.action Short description Actions controlled by this rule Definition Actions controlled by this Rule. Comments Note that this is the direct action (not the grounds for the action covered in the purpose element). At present, the only action in the understood and tested scope of this resource is 'read'. Meaning when missing all actions Data type CodeableConcept Binding Detailed codes for the consent action. ConsentActionCodes (example) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD
securityLabel	Σ	0..0	CodingBinding	There are no (further) constraints on this element Element id Consent.provision.securityLabel Short description Security Labels that define affected resources Definition A security label, comprised of 0..* security label fields (Privacy tags), which define which resources are controlled by this exception. Comments If the consent specifies a security label of "R" then it applies to all resources that are labeled "R" or lower. E.g. for Confidentiality, it's a high water mark. For other kinds of security labels, subsumption logic applies. When the purpose of use tag is on the data, access request purpose of use shall not conflict. Data type Coding Binding Security Labels from the Healthcare Privacy and Security Classification System. All Security Labels (extensible) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim: CV orim: fhir:Coding rdfs:subClassOf dt:CDCoding
purpose	Σ	0..0	CodingBinding	There are no (further) constraints on this element Element id Consent.provision.purpose Short description Context of activities covered by this rule Definition The context of the activities a user is taking - why the user is accessing the data - that are controlled by this rule. Comments When the purpose of use tag is on the data, access request purpose of use shall not conflict. Data type Coding Binding What purposes of use are controlled by this exception. If more than one label is specified, operations must have all the specified labels. http://terminology.hl7.org/ValueSet/v3-PurposeOfUse (extensible) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim: CV orim: fhir:Coding rdfs:subClassOf dt:CDCoding
class	Σ	0..0	CodingBinding	There are no (further) constraints on this element Element id Consent.provision.class Short description e.g. Resource Type, Profile, CDA, etc. Definition The class of information covered by this rule. The type can be a FHIR resource type, a profile on a type, or a CDA document, or some other type that indicates what sort of information the consent relates to. Comments Multiple types are or'ed together. The intention of the contentType element is that the codes refer to profiles or document types defined in a standard or an implementation guide somewhere. Data type Coding Binding The class (type) of information a consent rule covers. ConsentContentClass (extensible) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE/CNE/CWE subset one of the sets of component 1-3 or 4-6 rim: CV orim: fhir:Coding rdfs:subClassOf dt:CDCoding
code	Σ	0..0	CodeableConcept	There are no (further) constraints on this element Element id Consent.provision.code Short description e.g. LOINC or SNOMED CT code, etc. in the content Definition If this code is found in an instance, then the rule applies. Comments Typical use of this is a Document code with class = CDA. Data type CodeableConcept Binding If this code is found in an instance, then the exception applies. ConsentContentCodes (example) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CE/CNE/CWE rim: CD orim: fhir:CodeableConcept rdfs:subClassOf dt:CD
dataPeriod	Σ I	0..0	Period	There are no (further) constraints on this element Element id Consent.provision.dataPeriod Short description Timeframe for data controlled by this rule Definition Clinical or Operational Relevant period of time that bounds the data controlled by this rule. Comments This has a different sense to the Consent.period - that is when the consent agreement holds. This is the time period of the data that is controlled by the agreement. Data type Period Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` per-1: If present, start SHALL have a lower value than end `start.hasValue().not() or end.hasValue().not() or (start <= end)` Mappings rim: n/a v2: DR rim: IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"]
data	Σ	1..1	BackboneElement	There are no (further) constraints on this element Element id Consent.provision.data Short description Data controlled by this rule Definition The resources controlled by this rule if specific resources are referenced. Meaning when missing all data Data type BackboneElement Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a rim: Role
id		0..1	id	There are no (further) constraints on this element Element id Consent.provision.data.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type id Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Consent.provision.data.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
modifierExtension	Σ ?! I	0..*	Extension	There are no (further) constraints on this element Element id Consent.provision.data.modifierExtension Short description Extensions that cannot be ignored even if unrecognized Alternate names extensions, user content, modifiers Definition May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). Requirements Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
meaning	Σ	1..1	codeBinding	There are no (further) constraints on this element Element id Consent.provision.data.meaning Short description instance \| related \| dependents \| authoredby Definition How the resource reference is interpreted when testing consent restrictions. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data type code Binding How a resource reference is interpreted when testing consent restrictions. ConsentDataMeaning (required) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a
reference	Σ I	1..1	Reference(LaboratoryReport \| LaboratoryReportStructured)	Element id Consent.provision.data.reference Short description The actual data reference Definition A reference to a specific resource that defines which resources are covered by this consent. Comments References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository. Data type Reference(LaboratoryReport \| LaboratoryReportStructured) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ref-1: SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')) or (reference='#' and %rootResource!=%resource)` Mappings rim: n/a rim: The target of a resource reference is a RIM entry point (Act, Role, or Entity)
id		0..1	id	There are no (further) constraints on this element Element id Consent.provision.data.reference.id Short description Unique id for inter-element referencing Definition Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. Data type id Mappings rim: n/a
extension	I	0..*	Extension	There are no (further) constraints on this element Element id Consent.provision.data.reference.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data type Extension Sliced: Unordered, Open, by url(Value) Extensions are always sliced by (at least) url Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` ext-1: Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim: n/a rim: N/A
reference	Σ I	1..1	string	There are no (further) constraints on this element Element id Consent.provision.data.reference.reference Short description Literal reference, Relative, internal or absolute URL Definition A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources. Comments Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server. Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` lab-ele-nover: No version specific reference is allowed `contains('/_history/').not()` Mappings rim: n/a rim: N/A
type	Σ	1..1	uriBinding	There are no (further) constraints on this element Element id Consent.provision.data.reference.type Short description Type the reference refers to (e.g. "Patient") Definition The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent. The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources). Comments This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified. Data type uri Binding ResourceType (extensible) Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a rim: N/A
identifier	Σ	0..0	Identifier	There are no (further) constraints on this element Element id Consent.provision.data.reference.identifier Short description Logical reference, when literal reference is not known Definition An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference. Comments When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it. Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation\|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any). Data type Identifier Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a v2: CX / EI (occasionally, more often EI maps to a resource id or a URL) rim: II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd: Identifier rim: .identifier
display	Σ	0..0	string	There are no (further) constraints on this element Element id Consent.provision.data.reference.display Short description Text alternative for the resource Definition Plain text narrative that identifies the resource in addition to the resource reference. Comments This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it. Data type string Constraints ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource `hasValue() or (children().count() > id.count()) or $this is Parameters` Mappings rim: n/a rim: N/A
provision		0..0	see (provision)	There are no (further) constraints on this element Element id Consent.provision.provision Short description Nested Exception Rules Definition Rules which provide exceptions to the base rule or subrules.

Izsaukuma veikšana

Izmeklējuma datu reģistrācijai tiek izmantots POST pieprasījumi. Izmeklējuma datu reģistrācijai tiek izmantots PUT pieprasījumi.

Resursu reģistrācija ir asinhronais process. Lai iegūtu reģistrācijas pieprasījuma statusu jāveic uzdevuma statusa izgūšanas pieprasījums (sk. Asinhronie datu izmaiņu pieprasījumi).