The purpose of this identifier.

Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

Identifies the purpose for this identifier, if known .

A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

Allows users to make use of identifiers when the identifier system is not known.

This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.

Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

Identifier.system is always case sensitive.

The portion of the identifier typically relevant to the user and which is unique within the context of the system.

If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

Time period during which identifier is/was valid for use.

A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times").

Period is not used for a duration (a measure of elapsed time). See Duration.

Organization that issued/manages the identifier.

The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.

An identifier that applies to this person in this role.

Often, specific identities are assigned for the agent.

Whether this practitioner's record is in active use.

Need to be able to mark a practitioner record as not to be used because it was created in error.

If the practitioner is not in use by one organization, then it should mark the period on the PractitonerRole with an end date (even if they are active) as they may be active in another role.

This resource is generally assumed to be active if no value is provided for the active element

Identifies the purpose for this name.

Allows the appropriate name for a particular context of use to be selected from among a set of names.

Applications can assume that a name is current unless it explicitly says that it is temporary or old.

The use of a human name.

Specifies the entire name as it should be displayed e.g. on an application UI. This may be provided instead of or as well as the specific parts.

A renderable, unencoded form.

Can provide both a text representation and parts. Applications updating a name SHALL ensure that when both text and parts are present, no content is included in the text that isn't found in a part.

The part of a name that links to the genealogy. In some cultures (e.g. Eritrea) the family name of a son is the first name of his father.

Family Name may be decomposed into specific parts using extensions (de, nl, es related cultures).

Given name.

If only initials are recorded, they may be used in place of the full name parts. Initials may be separated into multiple given names but often aren't due to paractical limitations. This element is not called "first name" since given names do not always come first.

Part of the name that is acquired as a title due to academic, legal, employment or nobility status, etc. and that appears at the start of the name.

Note that FHIR strings SHALL NOT exceed 1MB in size

Part of the name that is acquired as a title due to academic, legal, employment or nobility status, etc. and that appears at the end of the name.

Note that FHIR strings SHALL NOT exceed 1MB in size

Indicates the period of time when this name was valid for the named person.

Allows names to be placed in historical context.

A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times").

Period is not used for a duration (a measure of elapsed time). See Duration.

Telecommunications form for contact point - what communications system is required to make use of the contact.

Note that FHIR strings SHALL NOT exceed 1MB in size

Telecommunications form for contact point.

The actual contact point details, in a form that is meaningful to the designated communication system (i.e. phone number or email address).

Need to support legacy numbers that are not in a tightly controlled format.

Additional text data such as phone extension numbers, or notes about use of the contact are sometimes included in the value.

Identifies the purpose for the contact point.

Need to track the way a person uses this contact, so a user can choose which is appropriate for their purpose.

Applications can assume that a contact is current unless it explicitly says that it is temporary or old.

Use of contact point.

Specifies a preferred order in which to use a set of contacts. ContactPoints with lower rank values are more preferred than those with higher rank values.

Note that rank does not necessarily follow the order in which the contacts are represented in the instance.

Time period when the contact point was/is in use.

A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times").

Period is not used for a duration (a measure of elapsed time). See Duration.

The purpose of this address.

Allows an appropriate address to be chosen from a list of many.

Applications can assume that an address is current unless it explicitly says that it is temporary or old.

The use of an address.

Distinguishes between physical addresses (those you can visit) and mailing addresses (e.g. PO Boxes and care-of addresses). Most addresses are both.

The definition of Address states that "address is intended to describe postal addresses, not physical locations". However, many applications track whether an address has a dual purpose of being a location that can be visited as well as being a valid delivery destination, and Postal addresses are often used as proxies for physical locations (also see the Location resource).

The type of an address (physical / postal).

Specifies the entire address as it should be displayed e.g. on a postal label. This may be provided instead of or as well as the specific parts.

A renderable, unencoded form.

Can provide both a text representation and parts. Applications updating an address SHALL ensure that when both text and parts are present, no content is included in the text that isn't found in a part.

This component contains the house number, apartment number, street name, street direction, P.O. Box number, delivery hints, and similar address information.

Note that FHIR strings SHALL NOT exceed 1MB in size

The name of the city, town, suburb, village or other community or delivery center.

Note that FHIR strings SHALL NOT exceed 1MB in size

The name of the administrative area (county).

District is sometimes known as county, but in some regions 'county' is used in place of city (municipality), so county name should be conveyed in city instead.

Sub-unit of a country with limited sovereignty in a federally organized country. A code may be used if codes are in common use (e.g. US 2 letter state codes).

Note that FHIR strings SHALL NOT exceed 1MB in size

Two letter USPS alphabetic codes.

A postal code designating a region defined by the postal service.

Note that FHIR strings SHALL NOT exceed 1MB in size

Country - a nation as commonly understood or generally accepted.

ISO 3166 3 letter codes can be used in place of a human readable country name.

Time period when address was/is in use.

Allows addresses to be placed in historical context.

A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times").

Period is not used for a duration (a measure of elapsed time). See Duration.

Administrative Gender - the gender that the person is considered to have for administration and record keeping purposes.

Needed to address the person correctly.

Note that FHIR strings SHALL NOT exceed 1MB in size

The gender of a person used for administrative purposes.

The date of birth for the practitioner.

Needed for identification.

Image of the person.

Many EHR systems have the capability to capture an image of patients and personnel. Fits with newer social media usage too.

When providing a summary view (for example with Observation.value[x]) Attachment should be represented with a brief display text such as "Signed Procedure Consent".

An identifier that applies to this person's qualification in this role.

Often, specific identities are assigned for the qualification.

Coded representation of the qualification.

Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination.

Specific qualification the practitioner has to provide a service.

Period during which the qualification is valid.

Qualifications are often for a limited period of time, and can be revoked.

A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times").

Period is not used for a duration (a measure of elapsed time). See Duration.

Organization that regulates and issues the qualification.

References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.

A language the practitioner can use in patient communication.

Knowing which language a practitioner speaks can help in facilitating communication with patients.

The structure aa-BB with this exact casing is one the most widely used notations for locale. However not all systems code this but instead have it as free text. Hence CodeableConcept instead of code as the data type.

A human language.