Important: This is a draft IG for trial use. Click here to give feedback.

HdBe-TimeInterval

Profile	Description	Status	URL
HdBe-TimeInterval	A time interval indicates the time between two moments in time. Interval can be defined by a start time and end time , start time and duration or duration and end time.	draft	https://fhir.healthdata.be/StructureDefinition/HdBe-TimeInterval

Period	I		Period	Element Id Period Short description Time range defined by start and end date/time Definition A time period defined by a start and end date and optionally time. Comments A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration. Data Type Period Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` per-1:If present, start SHALL have a lower value than end `start.hasValue().not() or end.hasValue().not() or (start <= end)` Mappings rim:n/a v2:DR rim:IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"] HdBe-TimeInterval:TimeInterval
extension	I	0..*	Extension	Element Id Period.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data Type Extension Sliced: Unordered, Open, by url(Value) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
duration	I	0..1	Extension(Duration)	Element Id Period.extension:duration Short description Optional Extensions Element Alternate names extensions, user content Definition Optional Extension Element - found in all resources. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data Type Extension(Duration) Extension URL https://fhir.healthdata.be/StructureDefinition/ext-TimeInterval.Duration Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
url		1..1	System.StringFixed Value	There are no (further) constraints on this element Element Id Period.extension:duration.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data Type System.String Fixed Value https://fhir.healthdata.be/StructureDefinition/ext-TimeInterval.Duration Mappings rim:N/A
value[x]		0..1		Element Id Period.extension:duration.value[x] Short description Duration Alternate names tijdsDuur Definition The duration of the interval in appropriate units of time (e.g. days or hours, etc. Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A zib-timeinterval-v1.0-2020EN:NL-CM:20.3.4 HdBe-TimeInterval:TimeInterval.Duration
valueDuration			Duration	There are no (further) constraints on this element Data Type Duration
start	Σ I	0..1	dateTime	Element Id Period.start Short description startDateTime Alternate names startDatumTijd Definition The start date and time of the interval Comments If the low element is missing, the meaning is that the low boundary is not known. Data Type dateTime Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:DR.1 rim:./low zib-timeinterval-v1.0-2020EN:NL-CM:20.3.2 HdBe-TimeInterval:TimeInterval.StartDateTime
end	Σ I	0..1	dateTime	Element Id Period.end Short description endDateTime Alternate names eindDatumTijd Definition The end date and time of the interval Comments The high value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has an end value of 2012-02-03. Meaning When Missing If the end of the period is missing, it means that the period is ongoing Data Type dateTime Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:DR.2 rim:./high zib-timeinterval-v1.0-2020EN:NL-CM:20.3.3 HdBe-TimeInterval:TimeInterval.EndDateTime

Period	I		Period	Element Id Period Short description Time range defined by start and end date/time Definition A time period defined by a start and end date and optionally time. Comments A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration. Data Type Period Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` per-1:If present, start SHALL have a lower value than end `start.hasValue().not() or end.hasValue().not() or (start <= end)` Mappings rim:n/a v2:DR rim:IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"] HdBe-TimeInterval:TimeInterval
extension	I	0..*	Extension	Element Id Period.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data Type Extension Sliced: Unordered, Open, by url(Value) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
duration	I	0..1	Extension(Duration)	Element Id Period.extension:duration Short description Optional Extensions Element Alternate names extensions, user content Definition Optional Extension Element - found in all resources. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data Type Extension(Duration) Extension URL https://fhir.healthdata.be/StructureDefinition/ext-TimeInterval.Duration Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
url		1..1	System.StringFixed Value	There are no (further) constraints on this element Element Id Period.extension:duration.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data Type System.String Fixed Value https://fhir.healthdata.be/StructureDefinition/ext-TimeInterval.Duration Mappings rim:N/A
value[x]		0..1		Element Id Period.extension:duration.value[x] Short description Duration Alternate names tijdsDuur Definition The duration of the interval in appropriate units of time (e.g. days or hours, etc. Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A zib-timeinterval-v1.0-2020EN:NL-CM:20.3.4 HdBe-TimeInterval:TimeInterval.Duration
valueDuration			Duration	There are no (further) constraints on this element Data Type Duration
start	Σ I	0..1	dateTime	Element Id Period.start Short description startDateTime Alternate names startDatumTijd Definition The start date and time of the interval Comments If the low element is missing, the meaning is that the low boundary is not known. Data Type dateTime Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:DR.1 rim:./low zib-timeinterval-v1.0-2020EN:NL-CM:20.3.2 HdBe-TimeInterval:TimeInterval.StartDateTime
end	Σ I	0..1	dateTime	Element Id Period.end Short description endDateTime Alternate names eindDatumTijd Definition The end date and time of the interval Comments The high value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has an end value of 2012-02-03. Meaning When Missing If the end of the period is missing, it means that the period is ongoing Data Type dateTime Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:DR.2 rim:./high zib-timeinterval-v1.0-2020EN:NL-CM:20.3.3 HdBe-TimeInterval:TimeInterval.EndDateTime

Period	I		Period	Element Id Period Short description Time range defined by start and end date/time Definition A time period defined by a start and end date and optionally time. Comments A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration. Data Type Period Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` per-1:If present, start SHALL have a lower value than end `start.hasValue().not() or end.hasValue().not() or (start <= end)` Mappings rim:n/a v2:DR rim:IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"] HdBe-TimeInterval:TimeInterval
extension	I	0..*	Extension	Element Id Period.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data Type Extension Sliced: Unordered, Open, by url(Value) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
duration	I	0..1	Extension(Duration)	Element Id Period.extension:duration Short description Optional Extensions Element Alternate names extensions, user content Definition Optional Extension Element - found in all resources. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data Type Extension(Duration) Extension URL https://fhir.healthdata.be/StructureDefinition/ext-TimeInterval.Duration Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
url		1..1	System.StringFixed Value	There are no (further) constraints on this element Element Id Period.extension:duration.url Short description identifies the meaning of the extension Definition Source of the definition for the extension code - a logical name or a URL. Comments The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. Data Type System.String Fixed Value https://fhir.healthdata.be/StructureDefinition/ext-TimeInterval.Duration Mappings rim:N/A
value[x]		0..1		Element Id Period.extension:duration.value[x] Short description Duration Alternate names tijdsDuur Definition The duration of the interval in appropriate units of time (e.g. days or hours, etc. Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A zib-timeinterval-v1.0-2020EN:NL-CM:20.3.4 HdBe-TimeInterval:TimeInterval.Duration
valueDuration			Duration	There are no (further) constraints on this element Data Type Duration
start	Σ I	0..1	dateTime	Element Id Period.start Short description startDateTime Alternate names startDatumTijd Definition The start date and time of the interval Comments If the low element is missing, the meaning is that the low boundary is not known. Data Type dateTime Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:DR.1 rim:./low zib-timeinterval-v1.0-2020EN:NL-CM:20.3.2 HdBe-TimeInterval:TimeInterval.StartDateTime
end	Σ I	0..1	dateTime	Element Id Period.end Short description endDateTime Alternate names eindDatumTijd Definition The end date and time of the interval Comments The high value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has an end value of 2012-02-03. Meaning When Missing If the end of the period is missing, it means that the period is ongoing Data Type dateTime Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:DR.2 rim:./high zib-timeinterval-v1.0-2020EN:NL-CM:20.3.3 HdBe-TimeInterval:TimeInterval.EndDateTime

Mapping FHIR profile to CBB

Path	map	CBB
Period	TimeInterval	HdBe-TimeInterval
Period.extension:duration.value[x]	TimeInterval.Duration	HdBe-TimeInterval
Period.start	TimeInterval.StartDateTime	HdBe-TimeInterval
Period.end	TimeInterval.EndDateTime	HdBe-TimeInterval

HdBe-TimeInterval is a datatype profile and can therefore not have an example of its own. Rather, an example is provided within the example of the HdBe-profile(s) that use this datatype profile.

zib TimeInterval difference

Concept	Category	Description
-	-	-

HdBe-TimeInterval

Mapping FHIR profile to CBB

zib TimeInterval difference

Terminology Bindings