<status value="active" /> <date value="2023-04-28" /> <publisher value="HL7 UK" /> <contact> <name value="HL7 UK" /> <telecom> <system value="email" /> <value value="ukcore@hl7.org.uk" /> <use value="work" /> <rank value="1" /> </telecom> </contact> <description value="This profile defines the UK constraints and extensions on the International FHIR resource [FamilyMemberHistory](https://hl7.org/fhir/R4/familymemberhistory.html)." /> <purpose value="This profile allows exchange of information about health events and conditions for a person related to the patient relevant in the context of care." /> <copyright value="Copyright © 2021+ HL7 UK Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. HL7® FHIR® standard Copyright © 2011+ HL7 The HL7® FHIR® standard is used under the FHIR license. You may obtain a copy of the FHIR license at https://www.hl7.org/fhir/license.html." /> <fhirVersion value="4.0.1" /> <kind value="resource" /> <abstract value="false" /> <type value="FamilyMemberHistory" /> <baseDefinition value="http://hl7.org/fhir/StructureDefinition/FamilyMemberHistory" /> <derivation value="constraint" /> <snapshot> <element id="FamilyMemberHistory"> <path value="FamilyMemberHistory" /> <short value="Information about patient's relatives, relevant for patient" /> <definition value="Significant health conditions for a person related to the patient relevant in the context of care for the patient." /> <min value="0" /> <max value="*" /> <base> <path value="FamilyMemberHistory" /> <min value="0" /> <max value="*" /> </base> <constraint> <key value="dom-2" /> <severity value="error" /> <human value="If the resource is contained in another resource, it SHALL NOT contain nested Resources" /> <expression value="contained.contained.empty()" /> <xpath value="not(parent::f:contained and f:contained)" /> <source value="http://hl7.org/fhir/StructureDefinition/DomainResource" /> </constraint> <constraint> <key value="dom-4" /> <severity value="error" /> <human value="If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated" /> <expression value="contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()" /> <xpath value="not(exists(f:contained/*/f:meta/f:versionId)) and not(exists(f:contained/*/f:meta/f:lastUpdated))" /> <source value="http://hl7.org/fhir/StructureDefinition/DomainResource" /> </constraint> <constraint> <key value="dom-3" /> <severity value="error" /> <human value="If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource" /> <expression value="contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty()" /> <xpath value="not(exists(for $id in f:contained/*/f:id/@value return $contained[not(parent::*/descendant::f:reference/@value=concat('#', $contained/*/id/@value) or descendant::f:reference[@value='#'])]))" /> <source value="http://hl7.org/fhir/StructureDefinition/DomainResource" /> </constraint> <constraint> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bestpractice"> <valueBoolean value="true" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bestpractice-explanation"> <valueMarkdown value="When a resource has no narrative, only systems that fully understand the data can display the resource to a human safely. Including a human readable representation in the resource makes for a much more robust eco-system and cheaper handling of resources by intermediary systems. Some ecosystems restrict distribution of resources to only those systems that do fully understand the resources, and as a consequence implementers may believe that the narrative is superfluous. However experience shows that such eco-systems often open up to new participants over time." /> </extension> <key value="dom-6" /> <severity value="warning" /> <human value="A resource should have narrative for robust management" /> <expression value="text.`div`.exists()" /> <xpath value="exists(f:text/h:div)" /> <source value="http://hl7.org/fhir/StructureDefinition/DomainResource" /> </constraint> <constraint> <key value="dom-5" /> <severity value="error" /> <human value="If a resource is contained in another resource, it SHALL NOT have a security label" /> <expression value="contained.meta.security.empty()" /> <xpath value="not(exists(f:contained/*/f:meta/f:security))" /> <source value="http://hl7.org/fhir/StructureDefinition/DomainResource" /> </constraint> <constraint> <key value="fhs-2" /> <severity value="error" /> <human value="Can only have estimatedAge if age[x] is present" /> <expression value="age.exists() or estimatedAge.empty()" /> <xpath value="exists(*[starts-with(local-name(.), 'age')]) or not(exists(f:estimatedAge))" /> <source value="http://hl7.org/fhir/StructureDefinition/FamilyMemberHistory" /> </constraint> <constraint> <key value="fhs-1" /> <severity value="error" /> <human value="Can have age[x] or born[x], but not both" /> <expression value="age.empty() or born.empty()" /> <xpath value="not (*[starts-with(local-name(.), 'age')] and *[starts-with(local-name(.), 'birth')])" /> <source value="http://hl7.org/fhir/StructureDefinition/FamilyMemberHistory" /> </constraint> <mapping> <identity value="rim" /> <map value="Entity. Role, or Act" /> </mapping> <mapping> <identity value="workflow" /> <map value="Event" /> </mapping> <mapping> <identity value="v2" /> <map value="Not in scope for v2" /> </mapping> <mapping> <identity value="rim" /> <map value="Observation[classCode=OBS, moodCode=EVN]" /> </mapping> </element> <element id="FamilyMemberHistory.id"> <path value="FamilyMemberHistory.id" /> <short value="Logical id of this artifact" /> <definition value="The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes." /> <comment value="The only time that a resource does not have an id is when it is being submitted to the server using a create operation." /> <min value="0" /> <max value="1" /> <base> <path value="Resource.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="id" /> </extension> <code value="id" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="FamilyMemberHistory.meta"> <path value="FamilyMemberHistory.meta" /> <short value="Metadata about the resource" /> <definition value="The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource." /> <min value="0" /> <max value="1" /> <base> <path value="Resource.meta" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Meta" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="FamilyMemberHistory.implicitRules"> <path value="FamilyMemberHistory.implicitRules" /> <short value="A set of rules under which this content was created" /> <definition value="A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc." /> <comment value="Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc." /> <min value="0" /> <max value="1" /> <base> <path value="Resource.implicitRules" /> <min value="0" /> <max value="1" /> </base> <type> <code value="uri" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isModifier value="true" /> <isModifierReason value="This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="FamilyMemberHistory.language"> <path value="FamilyMemberHistory.language" /> <short value="Language of the resource content" /> <definition value="The base language in which the resource is written." /> <comment value="Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute)." /> <min value="0" /> <max value="1" /> <base> <path value="Resource.language" /> <min value="0" /> <max value="1" /> </base> <type> <code value="code" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-maxValueSet"> <valueCanonical value="http://hl7.org/fhir/ValueSet/all-languages" /> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="Language" /> </extension> <strength value="preferred" /> <description value="A human language." /> <valueSet value="http://hl7.org/fhir/ValueSet/languages" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="FamilyMemberHistory.text"> <path value="FamilyMemberHistory.text" /> <short value="Text summary of the resource, for human interpretation" /> <definition value="A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety." /> <comment value="Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later." /> <alias value="narrative" /> <alias value="html" /> <alias value="xhtml" /> <alias value="display" /> <min value="0" /> <max value="1" /> <base> <path value="DomainResource.text" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Narrative" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> <mapping> <identity value="rim" /> <map value="Act.text?" /> </mapping> </element> <element id="FamilyMemberHistory.contained"> <path value="FamilyMemberHistory.contained" /> <short value="Contained, inline Resources" /> <definition value="These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope." /> <comment value="This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels." /> <alias value="inline resources" /> <alias value="anonymous resources" /> <alias value="contained resources" /> <min value="0" /> <max value="*" /> <base> <path value="DomainResource.contained" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Resource" /> </type> <mapping> <identity value="rim" /> <map value="Entity. Role, or Act" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="FamilyMemberHistory.extension"> <path value="FamilyMemberHistory.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="DomainResource.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="FamilyMemberHistory.extension:associatedEncounter"> <path value="FamilyMemberHistory.extension" /> <sliceName value="associatedEncounter" /> <short value="An associated encounter reference." /> <definition value="An associated encounter reference." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="1" /> <base> <path value="DomainResource.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> <profile value="https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-AssociatedEncounter" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <isModifier value="false" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="FamilyMemberHistory.extension:participantR5"> <path value="FamilyMemberHistory.extension" /> <sliceName value="participantR5" /> <short value="Who or what participated in the activities related to the family member history. This is a R5 backport." /> <definition value="An extension to record who or what participated in the activities related to the family member history." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="DomainResource.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> <profile value="http://hl7.org/fhir/5.0/StructureDefinition/extension-FamilyMemberHistory.participant" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <isModifier value="false" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="FamilyMemberHistory.extension:participantR5.id"> <path value="FamilyMemberHistory.extension.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="FamilyMemberHistory.extension:participantR5.extension"> <path value="FamilyMemberHistory.extension.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="1" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="FamilyMemberHistory.extension:participantR5.extension:function"> <path value="FamilyMemberHistory.extension.extension" /> <sliceName value="function" /> <short value="The type of involvement in the activities related to the family member history." /> <definition value="Distinguishes the type of involvement of the actor in the activities related to the family member history." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="1" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <binding> <strength value="extensible" /> <valueSet value="http://hl7.org/fhir/ValueSet/participation-role-type" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="FamilyMemberHistory.extension:participantR5.extension:function.id"> <path value="FamilyMemberHistory.extension.extension.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="FamilyMemberHistory.extension:participantR5.extension:function.extension"> <path value="FamilyMemberHistory.extension.extension.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="FamilyMemberHistory.extension:participantR5.extension:function.url"> <path value="FamilyMemberHistory.extension.extension.url" /> <representation value="xmlAttr" /> <short value="identifies the meaning of the extension" /> <definition value="Source of the definition for the extension code - a logical name or a URL." /> <comment value="The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension." /> <min value="1" /> <max value="1" /> <base> <path value="Extension.url" /> <min value="1" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="uri" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <fixedUri value="function" /> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="FamilyMemberHistory.extension:participantR5.extension:function.value[x]"> <path value="FamilyMemberHistory.extension.extension.value[x]" /> <short value="The type of involvement in the activities related to the family member history" /> <definition value="This FHIR value set is comprised of Actor participation Type codes, which can be used to value FHIR agents, actors, and other role elements. The codes are intended to express how the agent participated in some activity. Sometimes referred to the agent functional-role relative to the activity." /> <min value="1" /> <max value="1" /> <base> <path value="Extension.value[x]" /> <min value="0" /> <max value="1" /> </base> <type> <code value="CodeableConcept" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="FamilyMemberHistory.extension:participantR5.extension:actor"> <path value="FamilyMemberHistory.extension.extension" /> <sliceName value="actor" /> <short value="Who or what participated in the activities related to the family member history." /> <definition value="Indicates who or what participated in the activities related to the family member history." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="1" /> <max value="1" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="FamilyMemberHistory.extension:participantR5.extension:actor.id"> <path value="FamilyMemberHistory.extension.extension.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="FamilyMemberHistory.extension:participantR5.extension:actor.extension"> <path value="FamilyMemberHistory.extension.extension.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="FamilyMemberHistory.extension:participantR5.extension:actor.url"> <path value="FamilyMemberHistory.extension.extension.url" /> <representation value="xmlAttr" /> <short value="identifies the meaning of the extension" /> <definition value="Source of the definition for the extension code - a logical name or a URL." /> <comment value="The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension." /> <min value="1" /> <max value="1" /> <base> <path value="Extension.url" /> <min value="1" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="uri" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <fixedUri value="actor" /> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="FamilyMemberHistory.extension:participantR5.extension:actor.value[x]"> <path value="FamilyMemberHistory.extension.extension.value[x]" /> <short value="Who or what participated in the activities related to the family member history" /> <definition value="A reference to a Patient, Practitioner, PractitionerRole, RelatedPerson, Device, Organization, or CareTeam." /> <min value="1" /> <max value="1" /> <base> <path value="Extension.value[x]" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Reference" /> <targetProfile value="https://fhir.hl7.org.uk/StructureDefinition/UKCore-Patient" /> <targetProfile value="https://fhir.hl7.org.uk/StructureDefinition/UKCore-Practitioner" /> <targetProfile value="https://fhir.hl7.org.uk/StructureDefinition/UKCore-PractitionerRole" /> <targetProfile value="https://fhir.hl7.org.uk/StructureDefinition/UKCore-RelatedPerson" /> <targetProfile value="https://fhir.hl7.org.uk/StructureDefinition/UKCore-Device" /> <targetProfile value="https://fhir.hl7.org.uk/StructureDefinition/UKCore-Organization" /> <targetProfile value="https://fhir.hl7.org.uk/StructureDefinition/UKCore-CareTeam" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="FamilyMemberHistory.extension:participantR5.url"> <path value="FamilyMemberHistory.extension.url" /> <representation value="xmlAttr" /> <short value="identifies the meaning of the extension" /> <definition value="Source of the definition for the extension code - a logical name or a URL." /> <comment value="The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension." /> <min value="1" /> <max value="1" /> <base> <path value="Extension.url" /> <min value="1" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="uri" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <fixedUri value="http://hl7.org/fhir/5.0/StructureDefinition/extension-FamilyMemberHistory.participant" /> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="FamilyMemberHistory.extension:participantR5.value[x]"> <path value="FamilyMemberHistory.extension.value[x]" /> <short value="Value of extension" /> <definition value="Value of extension - must be one of a constrained set of the data types (see [Extensibility](extensibility.html) for a list)." /> <min value="0" /> <max value="0" /> <base> <path value="Extension.value[x]" /> <min value="0" /> <max value="1" /> </base> <type> <code value="base64Binary" /> </type> <type> <code value="boolean" /> </type> <type> <code value="canonical" /> </type> <type> <code value="code" /> </type> <type> <code value="date" /> </type> <type> <code value="dateTime" /> </type> <type> <code value="decimal" /> </type> <type> <code value="id" /> </type> <type> <code value="instant" /> </type> <type> <code value="integer" /> </type> <type> <code value="markdown" /> </type> <type> <code value="oid" /> </type> <type> <code value="positiveInt" /> </type> <type> <code value="string" /> </type> <type> <code value="time" /> </type> <type> <code value="unsignedInt" /> </type> <type> <code value="uri" /> </type> <type> <code value="url" /> </type> <type> <code value="uuid" /> </type> <type> <code value="Address" /> </type> <type> <code value="Age" /> </type> <type> <code value="Annotation" /> </type> <type> <code value="Attachment" /> </type> <type> <code value="CodeableConcept" /> </type> <type> <code value="Coding" /> </type> <type> <code value="ContactPoint" /> </type> <type> <code value="Count" /> </type> <type> <code value="Distance" /> </type> <type> <code value="Duration" /> </type> <type> <code value="HumanName" /> </type> <type> <code value="Identifier" /> </type> <type> <code value="Money" /> </type> <type> <code value="Period" /> </type> <type> <code value="Quantity" /> </type> <type> <code value="Range" /> </type> <type> <code value="Ratio" /> </type> <type> <code value="Reference" /> </type> <type> <code value="SampledData" /> </type> <type> <code value="Signature" /> </type> <type> <code value="Timing" /> </type> <type> <code value="ContactDetail" /> </type> <type> <code value="Contributor" /> </type> <type> <code value="DataRequirement" /> </type> <type> <code value="Expression" /> </type> <type> <code value="ParameterDefinition" /> </type> <type> <code value="RelatedArtifact" /> </type> <type> <code value="TriggerDefinition" /> </type> <type> <code value="UsageContext" /> </type> <type> <code value="Dosage" /> </type> <type> <code value="Meta" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="FamilyMemberHistory.modifierExtension"> <path value="FamilyMemberHistory.modifierExtension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Extensions that cannot be ignored" /> <definition value="May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself)." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <requirements value="Modifier extensions allow for extensions that *cannot* be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the [definition of modifier extensions](extensibility.html#modifierExtension)." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="DomainResource.modifierExtension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <isModifier value="true" /> <isModifierReason value="Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="FamilyMemberHistory.identifier"> <path value="FamilyMemberHistory.identifier" /> <short value="External Id(s) for this record" /> <definition value="Business identifiers assigned to this family member history by the performer or other systems which remain constant as the resource is updated and propagates from server to server." /> <comment value="This is a business identifier, not a resource identifier (see [discussion](resource.html#identifiers)). It is best practice for the identifier to only appear on a single resource instance, however business practices may occasionally dictate that multiple resource instances with the same identifier can exist - possibly even with different resource types. For example, multiple Patient and a Person resource instance might share the same social insurance number." /> <requirements value="Allows identification of the family member history as it is known by various participating systems and in a way that remains consistent across servers." /> <min value="0" /> <max value="*" /> <base> <path value="FamilyMemberHistory.identifier" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Identifier" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CX / EI (occasionally, more often EI maps to a resource id or a URL)" /> </mapping> <mapping> <identity value="rim" /> <map value="II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT]" /> </mapping> <mapping> <identity value="servd" /> <map value="Identifier" /> </mapping> <mapping> <identity value="workflow" /> <map value="Event.identifier" /> </mapping> <mapping> <identity value="w5" /> <map value="FiveWs.identifier" /> </mapping> <mapping> <identity value="rim" /> <map value="id" /> </mapping> </element> <element id="FamilyMemberHistory.identifier.id"> <path value="FamilyMemberHistory.identifier.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="FamilyMemberHistory.identifier.extension"> <path value="FamilyMemberHistory.identifier.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="FamilyMemberHistory.identifier.use"> <path value="FamilyMemberHistory.identifier.use" /> <short value="usual | official | temp | secondary | old (If known)" /> <definition value="The purpose of this identifier." /> <comment value="Applications can assume that an identifier is permanent unless it explicitly says that it is temporary." /> <requirements value="Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers." /> <min value="0" /> <max value="1" /> <base> <path value="Identifier.use" /> <min value="0" /> <max value="1" /> </base> <type> <code value="code" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isModifier value="true" /> <isModifierReason value="This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one." /> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="IdentifierUse" /> </extension> <strength value="required" /> <description value="Identifies the purpose for this identifier, if known ." /> <valueSet value="http://hl7.org/fhir/ValueSet/identifier-use|4.0.1" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="N/A" /> </mapping> <mapping> <identity value="rim" /> <map value="Role.code or implied by context" /> </mapping> </element> <element id="FamilyMemberHistory.identifier.type"> <path value="FamilyMemberHistory.identifier.type" /> <short value="Description of identifier" /> <definition value="A coded type for the identifier that can be used to determine which identifier to use for a specific purpose." /> <comment value="This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type." /> <requirements value="Allows users to make use of identifiers when the identifier system is not known." /> <min value="0" /> <max value="1" /> <base> <path value="Identifier.type" /> <min value="0" /> <max value="1" /> </base> <type> <code value="CodeableConcept" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="IdentifierType" /> </extension> <strength value="extensible" /> <description value="A coded type for an identifier that can be used to determine which identifier to use for a specific purpose." /> <valueSet value="http://hl7.org/fhir/ValueSet/identifier-type" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CE/CNE/CWE" /> </mapping> <mapping> <identity value="rim" /> <map value="CD" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:CodeableConcept rdfs:subClassOf dt:CD" /> </mapping> <mapping> <identity value="v2" /> <map value="CX.5" /> </mapping> <mapping> <identity value="rim" /> <map value="Role.code or implied by context" /> </mapping> </element> <element id="FamilyMemberHistory.identifier.system"> <path value="FamilyMemberHistory.identifier.system" /> <short value="The namespace for the identifier value" /> <definition value="Establishes the namespace for the value - that is, a URL that describes a set values that are unique." /> <comment value="Identifier.system is always case sensitive." /> <requirements value="There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers." /> <min value="0" /> <max value="1" /> <base> <path value="Identifier.system" /> <min value="0" /> <max value="1" /> </base> <type> <code value="uri" /> </type> <example> <label value="General" /> <valueUri value="http://www.acme.com/identifiers/patient" /> </example> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CX.4 / EI-2-4" /> </mapping> <mapping> <identity value="rim" /> <map value="II.root or Role.id.root" /> </mapping> <mapping> <identity value="servd" /> <map value="./IdentifierType" /> </mapping> </element> <element id="FamilyMemberHistory.identifier.value"> <path value="FamilyMemberHistory.identifier.value" /> <short value="The value that is unique" /> <definition value="The portion of the identifier typically relevant to the user and which is unique within the context of the system." /> <comment value="If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the [Rendered Value extension](extension-rendered-value.html). Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe." /> <min value="0" /> <max value="1" /> <base> <path value="Identifier.value" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <example> <label value="General" /> <valueString value="123456" /> </example> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CX.1 / EI.1" /> </mapping> <mapping> <identity value="rim" /> <map value="II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root)" /> </mapping> <mapping> <identity value="servd" /> <map value="./Value" /> </mapping> </element> <element id="FamilyMemberHistory.identifier.period"> <path value="FamilyMemberHistory.identifier.period" /> <short value="Time period when id is/was valid for use" /> <definition value="Time period during which identifier is/was valid for use." /> <comment value="A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See [Duration](datatypes.html#Duration)." /> <min value="0" /> <max value="1" /> <base> <path value="Identifier.period" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Period" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="per-1" /> <severity value="error" /> <human value="If present, start SHALL have a lower value than end" /> <expression value="start.hasValue().not() or end.hasValue().not() or (start <= end)" /> <xpath value="not(exists(f:start/@value)) or not(exists(f:end/@value)) or (xs:dateTime(f:start/@value) <= xs:dateTime(f:end/@value))" /> <source value="http://hl7.org/fhir/StructureDefinition/Period" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="DR" /> </mapping> <mapping> <identity value="rim" /> <map value="IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"]" /> </mapping> <mapping> <identity value="v2" /> <map value="CX.7 + CX.8" /> </mapping> <mapping> <identity value="rim" /> <map value="Role.effectiveTime or implied by context" /> </mapping> <mapping> <identity value="servd" /> <map value="./StartDate and ./EndDate" /> </mapping> </element> <element id="FamilyMemberHistory.identifier.assigner"> <path value="FamilyMemberHistory.identifier.assigner" /> <short value="Organization that issued id (may be just text)" /> <definition value="Organization that issued/manages the identifier." /> <comment value="The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization." /> <min value="0" /> <max value="1" /> <base> <path value="Identifier.assigner" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Reference" /> <targetProfile value="https://fhir.hl7.org.uk/StructureDefinition/UKCore-Organization" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ref-1" /> <severity value="error" /> <human value="SHALL have a contained resource if a local reference is provided" /> <expression value="reference.exists() implies (reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')) or (reference='#' and %rootResource!=%resource))" /> <xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Reference" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" /> </mapping> <mapping> <identity value="v2" /> <map value="CX.4 / (CX.4,CX.9,CX.10)" /> </mapping> <mapping> <identity value="rim" /> <map value="II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper" /> </mapping> <mapping> <identity value="servd" /> <map value="./IdentifierIssuingAuthority" /> </mapping> </element> <element id="FamilyMemberHistory.instantiatesCanonical"> <path value="FamilyMemberHistory.instantiatesCanonical" /> <short value="Instantiates FHIR protocol or definition" /> <definition value="The URL pointing to a FHIR-defined protocol, guideline, orderset or other definition that is adhered to in whole or in part by this FamilyMemberHistory." /> <comment value="see [Canonical References](references.html#canonical)" /> <min value="0" /> <max value="*" /> <base> <path value="FamilyMemberHistory.instantiatesCanonical" /> <min value="0" /> <max value="*" /> </base> <type> <code value="canonical" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/PlanDefinition" /> <targetProfile value="https://fhir.hl7.org.uk/StructureDefinition/UKCore-Questionnaire" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/ActivityDefinition" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Measure" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/OperationDefinition" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="workflow" /> <map value="Event.instantiatesCanonical" /> </mapping> <mapping> <identity value="rim" /> <map value=".outboundRelationship[typeCode=DEFN].target" /> </mapping> </element> <element id="FamilyMemberHistory.instantiatesUri"> <path value="FamilyMemberHistory.instantiatesUri" /> <short value="Instantiates external protocol or definition" /> <definition value="The URL pointing to an externally maintained protocol, guideline, orderset or other definition that is adhered to in whole or in part by this FamilyMemberHistory." /> <comment value="This might be an HTML page, PDF, etc. or could just be a non-resolvable URI identifier." /> <min value="0" /> <max value="*" /> <base> <path value="FamilyMemberHistory.instantiatesUri" /> <min value="0" /> <max value="*" /> </base> <type> <code value="uri" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="workflow" /> <map value="Event.instantiatesUri" /> </mapping> <mapping> <identity value="rim" /> <map value=".outboundRelationship[typeCode=DEFN].target" /> </mapping> </element> <element id="FamilyMemberHistory.status"> <path value="FamilyMemberHistory.status" /> <short value="partial | completed | entered-in-error | health-unknown" /> <definition value="A code specifying the status of the record of the family history of a specific family member." /> <comment value="This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid." /> <min value="1" /> <max value="1" /> <base> <path value="FamilyMemberHistory.status" /> <min value="1" /> <max value="1" /> </base> <type> <code value="code" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isModifier value="true" /> <isModifierReason value="This element is labelled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid" /> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="FamilyHistoryStatus" /> </extension> <strength value="required" /> <description value="A code that identifies the status of the family history record." /> <valueSet value="http://hl7.org/fhir/ValueSet/history-status|4.0.1" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="workflow" /> <map value="Event.status" /> </mapping> <mapping> <identity value="w5" /> <map value="FiveWs.status" /> </mapping> </element> <element id="FamilyMemberHistory.dataAbsentReason"> <path value="FamilyMemberHistory.dataAbsentReason" /> <short value="subject-unknown | withheld | unable-to-obtain | deferred" /> <definition value="Describes why the family member's history is not available." /> <comment value="Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination." /> <requirements value="This is a separate element to allow it to have a distinct binding from reasonCode." /> <min value="0" /> <max value="1" /> <base> <path value="FamilyMemberHistory.dataAbsentReason" /> <min value="0" /> <max value="1" /> </base> <type> <code value="CodeableConcept" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="FamilyHistoryAbsentReason" /> </extension> <strength value="extensible" /> <description value="Codes describing the reason why a family member's history is not available." /> <valueSet value="http://hl7.org/fhir/ValueSet/history-absent-reason" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CE/CNE/CWE" /> </mapping> <mapping> <identity value="rim" /> <map value="CD" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:CodeableConcept rdfs:subClassOf dt:CD" /> </mapping> <mapping> <identity value="rim" /> <map value=".reasonCode" /> </mapping> </element> <element id="FamilyMemberHistory.patient"> <path value="FamilyMemberHistory.patient" /> <short value="Patient history is about" /> <definition value="The person who this history concerns." /> <comment value="References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository." /> <alias value="Proband" /> <min value="1" /> <max value="1" /> <base> <path value="FamilyMemberHistory.patient" /> <min value="1" /> <max value="1" /> </base> <type> <code value="Reference" /> <targetProfile value="https://fhir.hl7.org.uk/StructureDefinition/UKCore-Patient" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ref-1" /> <severity value="error" /> <human value="SHALL have a contained resource if a local reference is provided" /> <expression value="reference.exists() implies (reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')) or (reference='#' and %rootResource!=%resource))" /> <xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Reference" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" /> </mapping> <mapping> <identity value="workflow" /> <map value="Event.subject" /> </mapping> <mapping> <identity value="w5" /> <map value="FiveWs.subject[x]" /> </mapping> <mapping> <identity value="rim" /> <map value="participation[typeCode=SBJ].role" /> </mapping> <mapping> <identity value="w5" /> <map value="FiveWs.subject" /> </mapping> </element> <element id="FamilyMemberHistory.date"> <path value="FamilyMemberHistory.date" /> <short value="When history was recorded or last updated" /> <definition value="The date (and possibly time) when the family member history was recorded or last updated." /> <comment value="This should be captured even if the same as the date on the List aggregating the full family history." /> <requirements value="Allows determination of how current the summary is." /> <min value="0" /> <max value="1" /> <base> <path value="FamilyMemberHistory.date" /> <min value="0" /> <max value="1" /> </base> <type> <code value="dateTime" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="w5" /> <map value="FiveWs.recorded" /> </mapping> <mapping> <identity value="rim" /> <map value="participation[typeCode=AUT].time" /> </mapping> </element> <element id="FamilyMemberHistory.name"> <path value="FamilyMemberHistory.name" /> <short value="The family member described" /> <definition value="This will either be a name or a description; e.g. "Aunt Susan", "my cousin with the red hair"." /> <comment value="Note that FHIR strings SHALL NOT exceed 1MB in size" /> <requirements value="Allows greater ease in ensuring the same person is being talked about." /> <min value="0" /> <max value="1" /> <base> <path value="FamilyMemberHistory.name" /> <min value="0" /> <max value="1" /> </base> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="name" /> </mapping> </element> <element id="FamilyMemberHistory.relationship"> <path value="FamilyMemberHistory.relationship" /> <short value="Relationship to the subject" /> <definition value="The type of relationship this person has to the patient (father, mother, brother etc.)." /> <comment value="Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination." /> <min value="1" /> <max value="1" /> <base> <path value="FamilyMemberHistory.relationship" /> <min value="1" /> <max value="1" /> </base> <type> <code value="CodeableConcept" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="FamilialRelationship" /> </extension> <strength value="extensible" /> <description value="The nature of the relationship between the patient and the related person being described in the family member history." /> <valueSet value="https://fhir.hl7.org.uk/ValueSet/UKCore-PersonRelationshipType" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CE/CNE/CWE" /> </mapping> <mapping> <identity value="rim" /> <map value="CD" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:CodeableConcept rdfs:subClassOf dt:CD" /> </mapping> <mapping> <identity value="rim" /> <map value="code" /> </mapping> </element> <element id="FamilyMemberHistory.sex"> <path value="FamilyMemberHistory.sex" /> <short value="male | female | other | unknown" /> <definition value="The birth sex of the family member." /> <comment value="This element should ideally reflect whether the individual is genetically male or female. However, as reported information based on the knowledge of the patient or reporting friend/relative, there may be situations where the reported sex might not be totally accurate. E.g. 'Aunt Sue' might be XY rather than XX. Questions soliciting this information should be phrased to encourage capture of genetic sex where known. However, systems performing analysis should also allow for the possibility of imprecision with this element." /> <requirements value="Not all relationship codes imply sex and the relative's sex can be relevant for risk assessments." /> <min value="0" /> <max value="1" /> <base> <path value="FamilyMemberHistory.sex" /> <min value="0" /> <max value="1" /> </base> <type> <code value="CodeableConcept" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="Sex" /> </extension> <strength value="extensible" /> <description value="Codes describing the sex assigned at birth as documented on the birth registration." /> <valueSet value="http://hl7.org/fhir/ValueSet/administrative-gender" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CE/CNE/CWE" /> </mapping> <mapping> <identity value="rim" /> <map value="CD" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:CodeableConcept rdfs:subClassOf dt:CD" /> </mapping> </element> <element id="FamilyMemberHistory.born[x]"> <path value="FamilyMemberHistory.born[x]" /> <short value="(approximate) date of birth" /> <definition value="The actual or approximate date of birth of the relative." /> <requirements value="Allows calculation of the relative's age." /> <min value="0" /> <max value="1" /> <base> <path value="FamilyMemberHistory.born[x]" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Period" /> </type> <type> <code value="date" /> </type> <type> <code value="string" /> </type> <condition value="ele-1" /> <condition value="fhs-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="player[classCode=LIV, determinerCode=INSTANCE]. birthDate (could be URG)" /> </mapping> </element> <element id="FamilyMemberHistory.age[x]"> <path value="FamilyMemberHistory.age[x]" /> <short value="(approximate) age" /> <definition value="The age of the relative at the time the family member history is recorded." /> <comment value="use estimatedAge to indicate whether the age is actual or not." /> <requirements value="While age can be calculated from date of birth, sometimes recording age directly is more natural for clinicians." /> <min value="0" /> <max value="1" /> <base> <path value="FamilyMemberHistory.age[x]" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Age" /> </type> <type> <code value="Range" /> </type> <type> <code value="string" /> </type> <condition value="ele-1" /> <condition value="fhs-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="participation[typeCode=SBJ].act[classCode=OBS,moodCode=EVN, code="age"].value" /> </mapping> </element> <element id="FamilyMemberHistory.estimatedAge"> <path value="FamilyMemberHistory.estimatedAge" /> <short value="Age is estimated?" /> <definition value="If true, indicates that the age value specified is an estimated value." /> <comment value="This element is labeled as a modifier because the fact that age is estimated can/should change the results of any algorithm that calculates based on the specified age." /> <requirements value="Clinicians often prefer to specify an estimaged age rather than an age range." /> <min value="0" /> <max value="1" /> <base> <path value="FamilyMemberHistory.estimatedAge" /> <min value="0" /> <max value="1" /> </base> <type> <code value="boolean" /> </type> <meaningWhenMissing value="It is unknown whether the age is an estimate or not" /> <condition value="ele-1" /> <condition value="fhs-2" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="FamilyMemberHistory.deceased[x]"> <path value="FamilyMemberHistory.deceased[x]" /> <short value="Dead? How old/when?" /> <definition value="Deceased flag or the actual or approximate age of the relative at the time of death for the family member history record." /> <min value="0" /> <max value="1" /> <base> <path value="FamilyMemberHistory.deceased[x]" /> <min value="0" /> <max value="1" /> </base> <type> <code value="boolean" /> </type> <type> <code value="Age" /> </type> <type> <code value="Range" /> </type> <type> <code value="date" /> </type> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="player[classCode=LIV, determinerCode=INSTANCE].deceasedInd, deceasedDate (could be URG) For age, you'd hang an observation off the role" /> </mapping> </element> <element id="FamilyMemberHistory.reasonCode"> <path value="FamilyMemberHistory.reasonCode" /> <short value="Why was family member history performed?" /> <definition value="Describes why the family member history occurred in coded or textual form." /> <comment value="Textual reasons can be captured using reasonCode.text." /> <min value="0" /> <max value="*" /> <base> <path value="FamilyMemberHistory.reasonCode" /> <min value="0" /> <max value="*" /> </base> <type> <code value="CodeableConcept" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="FamilyHistoryReason" /> </extension> <strength value="example" /> <description value="Codes indicating why the family member history was done." /> <valueSet value="http://hl7.org/fhir/ValueSet/clinical-findings" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CE/CNE/CWE" /> </mapping> <mapping> <identity value="rim" /> <map value="CD" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:CodeableConcept rdfs:subClassOf dt:CD" /> </mapping> <mapping> <identity value="workflow" /> <map value="Event.reasonCode" /> </mapping> <mapping> <identity value="w5" /> <map value="FiveWs.why[x]" /> </mapping> <mapping> <identity value="rim" /> <map value=".reasonCode" /> </mapping> </element> <element id="FamilyMemberHistory.reasonReference"> <path value="FamilyMemberHistory.reasonReference" /> <short value="Why was family member history performed?" /> <definition value="Indicates a Condition, Observation, AllergyIntolerance, or QuestionnaireResponse that justifies this family member history event." /> <comment value="References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository." /> <min value="0" /> <max value="*" /> <base> <path value="FamilyMemberHistory.reasonReference" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Reference" /> <targetProfile value="https://fhir.hl7.org.uk/StructureDefinition/UKCore-Condition" /> <targetProfile value="https://fhir.hl7.org.uk/StructureDefinition/UKCore-Observation" /> <targetProfile value="https://fhir.hl7.org.uk/StructureDefinition/UKCore-AllergyIntolerance" /> <targetProfile value="https://fhir.hl7.org.uk/StructureDefinition/UKCore-QuestionnaireResponse" /> <targetProfile value="https://fhir.hl7.org.uk/StructureDefinition/UKCore-DiagnosticReport" /> <targetProfile value="https://fhir.hl7.org.uk/StructureDefinition/UKCore-DocumentReference" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ref-1" /> <severity value="error" /> <human value="SHALL have a contained resource if a local reference is provided" /> <expression value="reference.exists() implies (reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')) or (reference='#' and %rootResource!=%resource))" /> <xpath value="not(starts-with(f:reference/@value, '#')) or exists(ancestor::*[self::f:entry or self::f:parameter]/f:resource/f:*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')]|/*/f:contained/f:*[f:id/@value=substring-after(current()/f:reference/@value, '#')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Reference" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="The target of a resource reference is a RIM entry point (Act, Role, or Entity)" /> </mapping> <mapping> <identity value="workflow" /> <map value="Event.reasonReference" /> </mapping> <mapping> <identity value="w5" /> <map value="FiveWs.why[x]" /> </mapping> <mapping> <identity value="rim" /> <map value=".outboundRelationship[typeCode=RSON].target" /> </mapping> </element> <element id="FamilyMemberHistory.note"> <path value="FamilyMemberHistory.note" /> <short value="General note about related person" /> <definition value="This property allows a non condition-specific note to the made about the related person. Ideally, the note would be in the condition property, but this is not always possible." /> <comment value="For systems that do not have structured annotations, they can simply communicate a single annotation with no author or time. This element may need to be included in narrative because of the potential for modifying information. *Annotations SHOULD NOT* be used to communicate "modifying" information that could be computable. (This is a SHOULD because enforcing user behavior is nearly impossible)." /> <min value="0" /> <max value="*" /> <base> <path value="FamilyMemberHistory.note" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Annotation" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="N/A" /> </mapping> <mapping> <identity value="rim" /> <map value="Act" /> </mapping> <mapping> <identity value="workflow" /> <map value="Event.note" /> </mapping> <mapping> <identity value="rim" /> <map value="inboundRelationship[typeCode=SUBJ].source[classCode=OBS, moodCode=EVN, code=ActCode#ANNGEN].value" /> </mapping> </element> <element id="FamilyMemberHistory.note.id"> <path value="FamilyMemberHistory.note.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="FamilyMemberHistory.note.extension"> <path value="FamilyMemberHistory.note.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="FamilyMemberHistory.note.author[x]"> <path value="FamilyMemberHistory.note.author[x]" /> <short value="Individual responsible for the annotation" /> <definition value="The individual responsible for making the annotation." /> <comment value="Organization is used when there's no need for specific attribution as to who made the comment." /> <min value="0" /> <max value="1" /> <base> <path value="Annotation.author[x]" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Reference" /> <targetProfile value="https://fhir.hl7.org.uk/StructureDefinition/UKCore-Practitioner" /> <targetProfile value="https://fhir.hl7.org.uk/StructureDefinition/UKCore-Patient" /> <targetProfile value="https://fhir.hl7.org.uk/StructureDefinition/UKCore-RelatedPerson" /> <targetProfile value="https://fhir.hl7.org.uk/StructureDefinition/UKCore-Organization" /> </type> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="N/A" /> </mapping> <mapping> <identity value="rim" /> <map value="Act.participant[typeCode=AUT].role" /> </mapping> </element> <element id="FamilyMemberHistory.note.time"> <path value="FamilyMemberHistory.note.time" /> <short value="When the annotation was made" /> <definition value="Indicates when this particular annotation was made." /> <min value="0" /> <max value="1" /> <base> <path value="Annotation.time" /> <min value="0" /> <max value="1" /> </base> <type> <code value="dateTime" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="N/A" /> </mapping> <mapping> <identity value="rim" /> <map value="Act.effectiveTime" /> </mapping> </element> <element id="FamilyMemberHistory.note.text"> <path value="FamilyMemberHistory.note.text" /> <short value="The annotation - text content (as markdown)" /> <definition value="The text of the annotation in markdown format." /> <comment value="Systems are not required to have markdown support, so the text should be readable without markdown processing. The markdown syntax is GFM - see https://github.github.com/gfm/" /> <min value="1" /> <max value="1" /> <base> <path value="Annotation.text" /> <min value="1" /> <max value="1" /> </base> <type> <code value="markdown" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="N/A" /> </mapping> <mapping> <identity value="rim" /> <map value="Act.text" /> </mapping> </element> <element id="FamilyMemberHistory.condition"> <path value="FamilyMemberHistory.condition" /> <short value="Condition that the related person had" /> <definition value="The significant Conditions (or condition) that the family member had. This is a repeating section to allow a system to represent more than one condition per resource, though there is nothing stopping multiple resources - one per condition." /> <min value="0" /> <max value="*" /> <base> <path value="FamilyMemberHistory.condition" /> <min value="0" /> <max value="*" /> </base> <type> <code value="BackboneElement" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="inboundRelationship[typeCode=SUBJ].source[classCode=OBS, moodCode=EVN, code=ActCode#ASSERTION, value<Diagnosis]" /> </mapping> </element> <element id="FamilyMemberHistory.condition.id"> <path value="FamilyMemberHistory.condition.id" /> <representation value="xmlAttr" /> <short value="Unique id for inter-element referencing" /> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." /> <min value="0" /> <max value="1" /> <base> <path value="Element.id" /> <min value="0" /> <max value="1" /> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string" /> </extension> <code value="http://hl7.org/fhirpath/System.String" /> </type> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="FamilyMemberHistory.condition.extension"> <path value="FamilyMemberHistory.condition.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <description value="Extensions are always sliced by (at least) url" /> <rules value="open" /> </slicing> <short value="Additional content defined by implementations" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <alias value="extensions" /> <alias value="user content" /> <min value="0" /> <max value="*" /> <base> <path value="Element.extension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="FamilyMemberHistory.condition.modifierExtension"> <path value="FamilyMemberHistory.condition.modifierExtension" /> <short value="Extensions that cannot be ignored even if unrecognized" /> <definition value="May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself)." /> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." /> <requirements value="Modifier extensions allow for extensions that *cannot* be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the [definition of modifier extensions](extensibility.html#modifierExtension)." /> <alias value="extensions" /> <alias value="user content" /> <alias value="modifiers" /> <min value="0" /> <max value="*" /> <base> <path value="BackboneElement.modifierExtension" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Extension" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <constraint> <key value="ext-1" /> <severity value="error" /> <human value="Must have either extensions or value[x], not both" /> <expression value="extension.exists() != value.exists()" /> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])" /> <source value="http://hl7.org/fhir/StructureDefinition/Extension" /> </constraint> <isModifier value="true" /> <isModifierReason value="Modifier extensions are expected to modify the meaning or interpretation of the element that contains them" /> <isSummary value="true" /> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="N/A" /> </mapping> </element> <element id="FamilyMemberHistory.condition.code"> <path value="FamilyMemberHistory.condition.code" /> <short value="Condition suffered by relation" /> <definition value="The actual condition specified. Could be a coded condition (like MI or Diabetes) or a less specific string like 'cancer' depending on how much is known about the condition and the capabilities of the creating system." /> <comment value="Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination." /> <min value="1" /> <max value="1" /> <base> <path value="FamilyMemberHistory.condition.code" /> <min value="1" /> <max value="1" /> </base> <type> <code value="CodeableConcept" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="ConditionCode" /> </extension> <strength value="preferred" /> <description value="Identification of the Condition or diagnosis." /> <valueSet value="http://hl7.org/fhir/ValueSet/condition-code" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CE/CNE/CWE" /> </mapping> <mapping> <identity value="rim" /> <map value="CD" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:CodeableConcept rdfs:subClassOf dt:CD" /> </mapping> <mapping> <identity value="rim" /> <map value=".value" /> </mapping> </element> <element id="FamilyMemberHistory.condition.outcome"> <path value="FamilyMemberHistory.condition.outcome" /> <short value="deceased | permanent disability | etc." /> <definition value="Indicates what happened following the condition. If the condition resulted in death, deceased date is captured on the relation." /> <comment value="Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination." /> <min value="0" /> <max value="1" /> <base> <path value="FamilyMemberHistory.condition.outcome" /> <min value="0" /> <max value="1" /> </base> <type> <code value="CodeableConcept" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="ConditionOutcome" /> </extension> <strength value="preferred" /> <description value="The result of the condition for the patient; e.g. death, permanent disability, temporary disability, etc." /> <valueSet value="http://hl7.org/fhir/ValueSet/condition-outcome" /> </binding> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="CE/CNE/CWE" /> </mapping> <mapping> <identity value="rim" /> <map value="CD" /> </mapping> <mapping> <identity value="orim" /> <map value="fhir:CodeableConcept rdfs:subClassOf dt:CD" /> </mapping> <mapping> <identity value="rim" /> <map value="outboundRelationship[typeCode=OUTC)].target[classCode=OBS, moodCode=EVN, code=ActCode#ASSERTION].value" /> </mapping> </element> <element id="FamilyMemberHistory.condition.contributedToDeath"> <path value="FamilyMemberHistory.condition.contributedToDeath" /> <short value="Whether the condition contributed to the cause of death" /> <definition value="This condition contributed to the cause of death of the related person. If contributedToDeath is not populated, then it is unknown." /> <min value="0" /> <max value="1" /> <base> <path value="FamilyMemberHistory.condition.contributedToDeath" /> <min value="0" /> <max value="1" /> </base> <type> <code value="boolean" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> </element> <element id="FamilyMemberHistory.condition.onset[x]"> <path value="FamilyMemberHistory.condition.onset[x]" /> <short value="When condition first manifested" /> <definition value="Either the age of onset, range of approximate age or descriptive string can be recorded. For conditions with multiple occurrences, this describes the first known occurrence." /> <requirements value="Age of onset of a condition in relatives is predictive of risk for the patient." /> <min value="0" /> <max value="1" /> <base> <path value="FamilyMemberHistory.condition.onset[x]" /> <min value="0" /> <max value="1" /> </base> <type> <code value="Age" /> </type> <type> <code value="Range" /> </type> <type> <code value="Period" /> </type> <type> <code value="string" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="rim" /> <map value="inboundRelationship[typeCode=SUBJ].source[classCode=OBS, moodCode=EVN, code="Subject Age at measurement", value<Diagnosis].value[@xsi:typeCode='TS' or 'IVL_TS'] Use originalText for string" /> </mapping> </element> <element id="FamilyMemberHistory.condition.note"> <path value="FamilyMemberHistory.condition.note" /> <short value="Extra information about condition" /> <definition value="An area where general notes can be placed about this specific condition." /> <comment value="For systems that do not have structured annotations, they can simply communicate a single annotation with no author or time. This element may need to be included in narrative because of the potential for modifying information. *Annotations SHOULD NOT* be used to communicate "modifying" information that could be computable. (This is a SHOULD because enforcing user behavior is nearly impossible)." /> <min value="0" /> <max value="*" /> <base> <path value="FamilyMemberHistory.condition.note" /> <min value="0" /> <max value="*" /> </base> <type> <code value="Annotation" /> </type> <condition value="ele-1" /> <constraint> <key value="ele-1" /> <severity value="error" /> <human value="All FHIR elements must have a @value or children" /> <expression value="hasValue() or (children().count() > id.count())" /> <xpath value="@value|f:*|h:div" /> <source value="http://hl7.org/fhir/StructureDefinition/Element" /> </constraint> <mapping> <identity value="rim" /> <map value="n/a" /> </mapping> <mapping> <identity value="v2" /> <map value="N/A" /> </mapping> <mapping> <identity value="rim" /> <map value="Act" /> </mapping> <mapping> <identity value="rim" /> <map value="inboundRelationship[typeCode=SUBJ].source[classCode=OBS, moodCode=EVN, code=ActCode#ANNGEN].value" /> </mapping> </element> </snapshot> <differential> <element id="FamilyMemberHistory.extension"> <path value="FamilyMemberHistory.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <rules value="open" /> </slicing> <min value="0" /> </element> <element id="FamilyMemberHistory.extension:associatedEncounter"> <path value="FamilyMemberHistory.extension" /> <sliceName value="associatedEncounter" /> <min value="0" /> <type> <code value="Extension" /> <profile value="https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-AssociatedEncounter" /> </type> <isModifier value="false" /> </element> <element id="FamilyMemberHistory.extension:participantR5"> <path value="FamilyMemberHistory.extension" /> <sliceName value="participantR5" /> <short value="Who or what participated in the activities related to the family member history. This is a R5 backport." /> <definition value="An extension to record who or what participated in the activities related to the family member history." /> <min value="0" /> <type> <code value="Extension" /> <profile value="http://hl7.org/fhir/5.0/StructureDefinition/extension-FamilyMemberHistory.participant" /> </type> <isModifier value="false" /> </element> <element id="FamilyMemberHistory.extension:participantR5.extension"> <path value="FamilyMemberHistory.extension.extension" /> <slicing> <discriminator> <type value="value" /> <path value="url" /> </discriminator> <rules value="open" /> </slicing> <min value="1" /> </element> <element id="FamilyMemberHistory.extension:participantR5.extension:function"> <path value="FamilyMemberHistory.extension.extension" /> <sliceName value="function" /> <min value="0" /> </element> <element id="FamilyMemberHistory.extension:participantR5.extension:function.value[x]"> <path value="FamilyMemberHistory.extension.extension.value[x]" /> <short value="The type of involvement in the activities related to the family member history" /> <definition value="This FHIR value set is comprised of Actor participation Type codes, which can be used to value FHIR agents, actors, and other role elements. The codes are intended to express how the agent participated in some activity. Sometimes referred to the agent functional-role relative to the activity." /> </element> <element id="FamilyMemberHistory.extension:participantR5.extension:actor"> <path value="FamilyMemberHistory.extension.extension" /> <sliceName value="actor" /> <min value="1" /> </element> <element id="FamilyMemberHistory.extension:participantR5.extension:actor.value[x]"> <path value="FamilyMemberHistory.extension.extension.value[x]" /> <short value="Who or what participated in the activities related to the family member history" /> <definition value="A reference to a Patient, Practitioner, PractitionerRole, RelatedPerson, Device, Organization, or CareTeam." /> </element> <element id="FamilyMemberHistory.identifier.assigner"> <path value="FamilyMemberHistory.identifier.assigner" /> <type> <code value="Reference" /> <targetProfile value="https://fhir.hl7.org.uk/StructureDefinition/UKCore-Organization" /> </type> </element> <element id="FamilyMemberHistory.instantiatesCanonical"> <path value="FamilyMemberHistory.instantiatesCanonical" /> <type> <code value="canonical" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/PlanDefinition" /> <targetProfile value="https://fhir.hl7.org.uk/StructureDefinition/UKCore-Questionnaire" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/ActivityDefinition" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Measure" /> <targetProfile value="http://hl7.org/fhir/StructureDefinition/OperationDefinition" /> </type> </element> <element id="FamilyMemberHistory.dataAbsentReason"> <path value="FamilyMemberHistory.dataAbsentReason" /> <binding> <strength value="extensible" /> </binding> </element> <element id="FamilyMemberHistory.patient"> <path value="FamilyMemberHistory.patient" /> <type> <code value="Reference" /> <targetProfile value="https://fhir.hl7.org.uk/StructureDefinition/UKCore-Patient" /> </type> </element> <element id="FamilyMemberHistory.relationship"> <path value="FamilyMemberHistory.relationship" /> <binding> <strength value="extensible" /> <valueSet value="https://fhir.hl7.org.uk/ValueSet/UKCore-PersonRelationshipType" /> </binding> </element> <element id="FamilyMemberHistory.reasonReference"> <path value="FamilyMemberHistory.reasonReference" /> <type> <code value="Reference" /> <targetProfile value="https://fhir.hl7.org.uk/StructureDefinition/UKCore-Condition" /> <targetProfile value="https://fhir.hl7.org.uk/StructureDefinition/UKCore-Observation" /> <targetProfile value="https://fhir.hl7.org.uk/StructureDefinition/UKCore-AllergyIntolerance" /> <targetProfile value="https://fhir.hl7.org.uk/StructureDefinition/UKCore-QuestionnaireResponse" /> <targetProfile value="https://fhir.hl7.org.uk/StructureDefinition/UKCore-DiagnosticReport" /> <targetProfile value="https://fhir.hl7.org.uk/StructureDefinition/UKCore-DocumentReference" /> </type> </element> <element id="FamilyMemberHistory.note.author[x]"> <path value="FamilyMemberHistory.note.author[x]" /> <type> <code value="Reference" /> <targetProfile value="https://fhir.hl7.org.uk/StructureDefinition/UKCore-Practitioner" /> <targetProfile value="https://fhir.hl7.org.uk/StructureDefinition/UKCore-Patient" /> <targetProfile value="https://fhir.hl7.org.uk/StructureDefinition/UKCore-RelatedPerson" /> <targetProfile value="https://fhir.hl7.org.uk/StructureDefinition/UKCore-Organization" /> </type> <type> <code value="string" /> </type> </element> <element id="FamilyMemberHistory.condition.code"> <path value="FamilyMemberHistory.condition.code" /> <binding> <strength value="preferred" /> </binding> </element> <element id="FamilyMemberHistory.condition.outcome"> <path value="FamilyMemberHistory.condition.outcome" /> <binding> <strength value="preferred" /> </binding> </element> </differential> </StructureDefinition>